[deliverable/linux.git] / drivers / net / wireless / iwlwifi / iwl-csr.h

/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 * USA
 *
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * Contact Information:
 * James P. Ketrenos <ipw2100-admin@linux.intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 * BSD LICENSE
 *
 * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *****************************************************************************/
/*=== CSR (control and status registers) ===*/
#define CSR_BASE    (0x000)

#define CSR_HW_IF_CONFIG_REG    (CSR_BASE+0x000) /* hardware interface config */
#define CSR_INT_COALESCING      (CSR_BASE+0x004) /* accum ints, 32-usec units */
#define CSR_INT                 (CSR_BASE+0x008) /* host interrupt status/ack */
#define CSR_INT_MASK            (CSR_BASE+0x00c) /* host interrupt enable */
#define CSR_FH_INT_STATUS       (CSR_BASE+0x010) /* busmaster int status/ack*/
#define CSR_GPIO_IN             (CSR_BASE+0x018) /* read external chip pins */
#define CSR_RESET               (CSR_BASE+0x020) /* busmaster enable, NMI, etc*/
#define CSR_GP_CNTRL            (CSR_BASE+0x024)

/*
 * Hardware revision info
 * Bit fields:
 * 31-8:  Reserved
 *  7-4:  Type of device:  0x0 = 4965, 0xd = 3945
 *  3-2:  Revision step:  0 = A, 1 = B, 2 = C, 3 = D
 *  1-0:  "Dash" value, as in A-1, etc.
 *
 * NOTE:  Revision step affects calculation of CCK txpower for 4965.
 */
#define CSR_HW_REV              (CSR_BASE+0x028)

/* EEPROM reads */
#define CSR_EEPROM_REG          (CSR_BASE+0x02c)
#define CSR_EEPROM_GP           (CSR_BASE+0x030)
#define CSR_GP_UCODE		(CSR_BASE+0x044)
#define CSR_UCODE_DRV_GP1       (CSR_BASE+0x054)
#define CSR_UCODE_DRV_GP1_SET   (CSR_BASE+0x058)
#define CSR_UCODE_DRV_GP1_CLR   (CSR_BASE+0x05c)
#define CSR_UCODE_DRV_GP2       (CSR_BASE+0x060)
#define CSR_GIO_CHICKEN_BITS    (CSR_BASE+0x100)
#define CSR_LED_REG             (CSR_BASE+0x094)

/* Analog phase-lock-loop configuration (3945 only)
 * Set bit 24. */
#define CSR_ANA_PLL_CFG         (CSR_BASE+0x20c)
/*
 * Indicates hardware rev, to determine CCK backoff for txpower calculation.
 * Bit fields:
 *  3-2:  0 = A, 1 = B, 2 = C, 3 = D step
 */
#define CSR_HW_REV_WA_REG	(CSR_BASE+0x22C)

/* Bits for CSR_HW_IF_CONFIG_REG */
#define CSR49_HW_IF_CONFIG_REG_BIT_4965_R	(0x00000010)
#define CSR49_HW_IF_CONFIG_REG_MSK_BOARD_VER	(0x00000C00)
#define CSR49_HW_IF_CONFIG_REG_BIT_MAC_SI		(0x00000100)
#define CSR49_HW_IF_CONFIG_REG_BIT_RADIO_SI	(0x00000200)

#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB         (0x00000100)
#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM         (0x00000200)
#define CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC            (0x00000400)
#define CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE         (0x00000800)
#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A    (0x00000000)
#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B    (0x00001000)

#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM     (0x00200000)

/* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
 * acknowledged (reset) by host writing "1" to flagged bits. */
#define CSR_INT_BIT_FH_RX        (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */
#define CSR_INT_BIT_HW_ERR       (1 << 29) /* DMA hardware error FH_INT[31] */
#define CSR_INT_BIT_DNLD         (1 << 28) /* uCode Download */
#define CSR_INT_BIT_FH_TX        (1 << 27) /* Tx DMA FH_INT[1:0] */
#define CSR_INT_BIT_SCD          (1 << 26) /* TXQ pointer advanced */
#define CSR_INT_BIT_SW_ERR       (1 << 25) /* uCode error */
#define CSR_INT_BIT_RF_KILL      (1 << 7)  /* HW RFKILL switch GP_CNTRL[27] toggled */
#define CSR_INT_BIT_CT_KILL      (1 << 6)  /* Critical temp (chip too hot) rfkill */
#define CSR_INT_BIT_SW_RX        (1 << 3)  /* Rx, command responses, 3945 */
#define CSR_INT_BIT_WAKEUP       (1 << 1)  /* NIC controller waking up (pwr mgmt) */
#define CSR_INT_BIT_ALIVE        (1 << 0)  /* uCode interrupts once it initializes */

#define CSR_INI_SET_MASK	(CSR_INT_BIT_FH_RX   | \
				 CSR_INT_BIT_HW_ERR  | \
				 CSR_INT_BIT_FH_TX   | \
				 CSR_INT_BIT_SW_ERR  | \
				 CSR_INT_BIT_RF_KILL | \
				 CSR_INT_BIT_SW_RX   | \
				 CSR_INT_BIT_WAKEUP  | \
				 CSR_INT_BIT_ALIVE)

/* interrupt flags in FH (flow handler) (PCI busmaster DMA) */
#define CSR_FH_INT_BIT_ERR       (1 << 31) /* Error */
#define CSR_FH_INT_BIT_HI_PRIOR  (1 << 30) /* High priority Rx, bypass coalescing */
#define CSR39_FH_INT_BIT_RX_CHNL2  (1 << 18) /* Rx channel 2 (3945 only) */
#define CSR_FH_INT_BIT_RX_CHNL1  (1 << 17) /* Rx channel 1 */
#define CSR_FH_INT_BIT_RX_CHNL0  (1 << 16) /* Rx channel 0 */
#define CSR39_FH_INT_BIT_TX_CHNL6  (1 << 6)  /* Tx channel 6 (3945 only) */
#define CSR_FH_INT_BIT_TX_CHNL1  (1 << 1)  /* Tx channel 1 */
#define CSR_FH_INT_BIT_TX_CHNL0  (1 << 0)  /* Tx channel 0 */

#define CSR39_FH_INT_RX_MASK	(CSR_FH_INT_BIT_HI_PRIOR | \
				 CSR39_FH_INT_BIT_RX_CHNL2 | \
				 CSR_FH_INT_BIT_RX_CHNL1 | \
				 CSR_FH_INT_BIT_RX_CHNL0)


#define CSR39_FH_INT_TX_MASK	(CSR39_FH_INT_BIT_TX_CHNL6 | \
				 CSR_FH_INT_BIT_TX_CHNL1 | \
				 CSR_FH_INT_BIT_TX_CHNL0)

#define CSR49_FH_INT_RX_MASK	(CSR_FH_INT_BIT_HI_PRIOR | \
				 CSR_FH_INT_BIT_RX_CHNL1 | \
				 CSR_FH_INT_BIT_RX_CHNL0)

#define CSR49_FH_INT_TX_MASK	(CSR_FH_INT_BIT_TX_CHNL1 | \
				 CSR_FH_INT_BIT_TX_CHNL0)

/* GPIO */
#define CSR_GPIO_IN_BIT_AUX_POWER                   (0x00000200)
#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC                (0x00000000)
#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC               (0x00000200)

/* RESET */
#define CSR_RESET_REG_FLAG_NEVO_RESET                (0x00000001)
#define CSR_RESET_REG_FLAG_FORCE_NMI                 (0x00000002)
#define CSR_RESET_REG_FLAG_SW_RESET                  (0x00000080)
#define CSR_RESET_REG_FLAG_MASTER_DISABLED           (0x00000100)
#define CSR_RESET_REG_FLAG_STOP_MASTER               (0x00000200)

/* GP (general purpose) CONTROL */
#define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY        (0x00000001)
#define CSR_GP_CNTRL_REG_FLAG_INIT_DONE              (0x00000004)
#define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ         (0x00000008)
#define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP         (0x00000010)

#define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN           (0x00000001)

#define CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE         (0x07000000)
#define CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE         (0x04000000)
#define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW          (0x08000000)


/* EEPROM REG */
#define CSR_EEPROM_REG_READ_VALID_MSK	(0x00000001)
#define CSR_EEPROM_REG_BIT_CMD		(0x00000002)

/* EEPROM GP */
#define CSR_EEPROM_GP_VALID_MSK		(0x00000006)
#define CSR_EEPROM_GP_BAD_SIGNATURE	(0x00000000)
#define CSR_EEPROM_GP_IF_OWNER_MSK	(0x00000180)

/* UCODE DRV GP */
#define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP             (0x00000001)
#define CSR_UCODE_SW_BIT_RFKILL                     (0x00000002)
#define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED           (0x00000004)
#define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT      (0x00000008)

/* GI Chicken Bits */
#define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX  (0x00800000)
#define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER  (0x20000000)

/* LED */
#define CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF)
#define CSR_LED_REG_TRUN_ON (0x78)
#define CSR_LED_REG_TRUN_OFF (0x38)

/*=== HBUS (Host-side Bus) ===*/
#define HBUS_BASE	(0x400)
/*
 * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM
 * structures, error log, event log, verifying uCode load).
 * First write to address register, then read from or write to data register
 * to complete the job.  Once the address register is set up, accesses to
 * data registers auto-increment the address by one dword.
 * Bit usage for address registers (read or write):
 *  0-31:  memory address within device
 */
#define HBUS_TARG_MEM_RADDR     (HBUS_BASE+0x00c)
#define HBUS_TARG_MEM_WADDR     (HBUS_BASE+0x010)
#define HBUS_TARG_MEM_WDAT      (HBUS_BASE+0x018)
#define HBUS_TARG_MEM_RDAT      (HBUS_BASE+0x01c)

/*
 * Registers for accessing device's internal peripheral registers
 * (e.g. SCD, BSM, etc.).  First write to address register,
 * then read from or write to data register to complete the job.
 * Bit usage for address registers (read or write):
 *  0-15:  register address (offset) within device
 * 24-25:  (# bytes - 1) to read or write (e.g. 3 for dword)
 */
#define HBUS_TARG_PRPH_WADDR    (HBUS_BASE+0x044)
#define HBUS_TARG_PRPH_RADDR    (HBUS_BASE+0x048)
#define HBUS_TARG_PRPH_WDAT     (HBUS_BASE+0x04c)
#define HBUS_TARG_PRPH_RDAT     (HBUS_BASE+0x050)

/*
 * Per-Tx-queue write pointer (index, really!) (3945 and 4965).
 * Indicates index to next TFD that driver will fill (1 past latest filled).
 * Bit usage:
 *  0-7:  queue write index
 * 11-8:  queue selector
 */
#define HBUS_TARG_WRPTR         (HBUS_BASE+0x060)
#define HBUS_TARG_MBX_C         (HBUS_BASE+0x030)

#define HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED         (0x00000004)
Commit	Line	Data
6f83eaa1 TW	1	/******************************************************************************
	2	*
	3	* This file is provided under a dual BSD/GPLv2 license. When using or
	4	* redistributing this file, you may do so under either license.
	5	*
	6	* GPL LICENSE SUMMARY
	7	*
	8	* Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
	9	*
	10	* This program is free software; you can redistribute it and/or modify
	11	* it under the terms of version 2 of the GNU General Public License as
	12	* published by the Free Software Foundation.
	13	*
	14	* This program is distributed in the hope that it will be useful, but
	15	* WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	17	* General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public License
	20	* along with this program; if not, write to the Free Software
	21	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
	22	* USA
	23	*
	24	* The full GNU General Public License is included in this distribution
	25	* in the file called LICENSE.GPL.
	26	*
	27	* Contact Information:
	28	* James P. Ketrenos <ipw2100-admin@linux.intel.com>
	29	* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
	30	*
	31	* BSD LICENSE
	32	*
eb7ae89c	33	* Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
6f83eaa1 TW	34	* All rights reserved.
	35	*
	36	* Redistribution and use in source and binary forms, with or without
	37	* modification, are permitted provided that the following conditions
	38	* are met:
	39	*
	40	* * Redistributions of source code must retain the above copyright
	41	* notice, this list of conditions and the following disclaimer.
	42	* * Redistributions in binary form must reproduce the above copyright
	43	* notice, this list of conditions and the following disclaimer in
	44	* the documentation and/or other materials provided with the
	45	* distribution.
	46	* * Neither the name Intel Corporation nor the names of its
	47	* contributors may be used to endorse or promote products derived
	48	* from this software without specific prior written permission.
	49	*
	50	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	51	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	52	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	53	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	54	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	55	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	56	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	57	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	58	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	59	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	60	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	61	*
	62	*****************************************************************************/
	63	/=== CSR (control and status registers) ===/
	64	#define CSR_BASE (0x000)
	65
	66	#define CSR_HW_IF_CONFIG_REG (CSR_BASE+0x000) /* hardware interface config */
	67	#define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */
	68	#define CSR_INT (CSR_BASE+0x008) /* host interrupt status/ack */
	69	#define CSR_INT_MASK (CSR_BASE+0x00c) /* host interrupt enable */
	70	#define CSR_FH_INT_STATUS (CSR_BASE+0x010) /* busmaster int status/ack*/
	71	#define CSR_GPIO_IN (CSR_BASE+0x018) /* read external chip pins */
	72	#define CSR_RESET (CSR_BASE+0x020) /* busmaster enable, NMI, etc*/
	73	#define CSR_GP_CNTRL (CSR_BASE+0x024)
	74
	75	/*
	76	* Hardware revision info
	77	* Bit fields:
	78	* 31-8: Reserved
	79	* 7-4: Type of device: 0x0 = 4965, 0xd = 3945
	80	* 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D
	81	* 1-0: "Dash" value, as in A-1, etc.
	82	*
	83	* NOTE: Revision step affects calculation of CCK txpower for 4965.
	84	*/
	85	#define CSR_HW_REV (CSR_BASE+0x028)
	86
	87	/* EEPROM reads */
	88	#define CSR_EEPROM_REG (CSR_BASE+0x02c)
	89	#define CSR_EEPROM_GP (CSR_BASE+0x030)
	90	#define CSR_GP_UCODE (CSR_BASE+0x044)
	91	#define CSR_UCODE_DRV_GP1 (CSR_BASE+0x054)
	92	#define CSR_UCODE_DRV_GP1_SET (CSR_BASE+0x058)
	93	#define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c)
	94	#define CSR_UCODE_DRV_GP2 (CSR_BASE+0x060)
	95	#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100)
ab53d8af	96	#define CSR_LED_REG (CSR_BASE+0x094)
6f83eaa1 TW	97
	98	/* Analog phase-lock-loop configuration (3945 only)
	99	* Set bit 24. */
	100	#define CSR_ANA_PLL_CFG (CSR_BASE+0x20c)
	101	/*
	102	* Indicates hardware rev, to determine CCK backoff for txpower calculation.
	103	* Bit fields:
	104	* 3-2: 0 = A, 1 = B, 2 = C, 3 = D step
	105	*/
	106	#define CSR_HW_REV_WA_REG (CSR_BASE+0x22C)
	107
	108	/* Bits for CSR_HW_IF_CONFIG_REG */
	109	#define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010)
	110	#define CSR49_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00)
	111	#define CSR49_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100)
	112	#define CSR49_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200)
	113
	114	#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB (0x00000100)
	115	#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM (0x00000200)
	116	#define CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC (0x00000400)
	117	#define CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE (0x00000800)
	118	#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A (0x00000000)
	119	#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B (0x00001000)
	120
	121	#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000)
	122
	123	/* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
	124	* acknowledged (reset) by host writing "1" to flagged bits. */
	125	#define CSR_INT_BIT_FH_RX (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */
	126	#define CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */
	127	#define CSR_INT_BIT_DNLD (1 << 28) /* uCode Download */
	128	#define CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */
	129	#define CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */
	130	#define CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */
	131	#define CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */
	132	#define CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */
	133	#define CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses, 3945 */
	134	#define CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */
	135	#define CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */
	136
	137	#define CSR_INI_SET_MASK (CSR_INT_BIT_FH_RX \| \
	138	CSR_INT_BIT_HW_ERR \| \
	139	CSR_INT_BIT_FH_TX \| \
	140	CSR_INT_BIT_SW_ERR \| \
	141	CSR_INT_BIT_RF_KILL \| \
	142	CSR_INT_BIT_SW_RX \| \
	143	CSR_INT_BIT_WAKEUP \| \
	144	CSR_INT_BIT_ALIVE)
	145
	146	/* interrupt flags in FH (flow handler) (PCI busmaster DMA) */
	147	#define CSR_FH_INT_BIT_ERR (1 << 31) /* Error */
	148	#define CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */
	149	#define CSR39_FH_INT_BIT_RX_CHNL2 (1 << 18) /* Rx channel 2 (3945 only) */
	150	#define CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */
	151	#define CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */
	152	#define CSR39_FH_INT_BIT_TX_CHNL6 (1 << 6) /* Tx channel 6 (3945 only) */
	153	#define CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */
	154	#define CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */
	155
	156	#define CSR39_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR \| \
	157	CSR39_FH_INT_BIT_RX_CHNL2 \| \
	158	CSR_FH_INT_BIT_RX_CHNL1 \| \
	159	CSR_FH_INT_BIT_RX_CHNL0)
	160
161
162	#define CSR39_FH_INT_TX_MASK (CSR39_FH_INT_BIT_TX_CHNL6 \| \
163	CSR_FH_INT_BIT_TX_CHNL1 \| \
164	CSR_FH_INT_BIT_TX_CHNL0)
165
166	#define CSR49_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR \| \
167	CSR_FH_INT_BIT_RX_CHNL1 \| \
168	CSR_FH_INT_BIT_RX_CHNL0)
169
170	#define CSR49_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 \| \
171	CSR_FH_INT_BIT_TX_CHNL0)
172
6f4083aa TW	173	/* GPIO */
	174	#define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200)
	175	#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000)
	176	#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200)
6f83eaa1 TW	177
	178	/* RESET */
	179	#define CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001)
	180	#define CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002)
	181	#define CSR_RESET_REG_FLAG_SW_RESET (0x00000080)
	182	#define CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100)
	183	#define CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200)
	184
	185	/* GP (general purpose) CONTROL */
	186	#define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001)
	187	#define CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004)
	188	#define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008)
	189	#define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010)
	190
	191	#define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001)
	192
	193	#define CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000)
	194	#define CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE (0x04000000)
	195	#define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000)
	196
	197
	198	/* EEPROM REG */
	199	#define CSR_EEPROM_REG_READ_VALID_MSK (0x00000001)
	200	#define CSR_EEPROM_REG_BIT_CMD (0x00000002)
	201
	202	/* EEPROM GP */
	203	#define CSR_EEPROM_GP_VALID_MSK (0x00000006)
	204	#define CSR_EEPROM_GP_BAD_SIGNATURE (0x00000000)
	205	#define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180)
	206
	207	/* UCODE DRV GP */
	208	#define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001)
	209	#define CSR_UCODE_SW_BIT_RFKILL (0x00000002)
	210	#define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004)
	211	#define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008)
	212
6f83eaa1 TW	213	/* GI Chicken Bits */
	214	#define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000)
	215	#define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000)
	216
ab53d8af MA	217	/* LED */
	218	#define CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF)
	219	#define CSR_LED_REG_TRUN_ON (0x78)
	220	#define CSR_LED_REG_TRUN_OFF (0x38)
	221
750fe639 TW	222	/=== HBUS (Host-side Bus) ===/
	223	#define HBUS_BASE (0x400)
	224	/*
	225	* Registers for accessing device's internal SRAM memory (e.g. SCD SRAM
	226	* structures, error log, event log, verifying uCode load).
	227	* First write to address register, then read from or write to data register
	228	* to complete the job. Once the address register is set up, accesses to
	229	* data registers auto-increment the address by one dword.
	230	* Bit usage for address registers (read or write):
	231	* 0-31: memory address within device
	232	*/
	233	#define HBUS_TARG_MEM_RADDR (HBUS_BASE+0x00c)
	234	#define HBUS_TARG_MEM_WADDR (HBUS_BASE+0x010)
	235	#define HBUS_TARG_MEM_WDAT (HBUS_BASE+0x018)
	236	#define HBUS_TARG_MEM_RDAT (HBUS_BASE+0x01c)
	237
	238	/*
	239	* Registers for accessing device's internal peripheral registers
	240	* (e.g. SCD, BSM, etc.). First write to address register,
	241	* then read from or write to data register to complete the job.
	242	* Bit usage for address registers (read or write):
	243	* 0-15: register address (offset) within device
	244	* 24-25: (# bytes - 1) to read or write (e.g. 3 for dword)
	245	*/
	246	#define HBUS_TARG_PRPH_WADDR (HBUS_BASE+0x044)
	247	#define HBUS_TARG_PRPH_RADDR (HBUS_BASE+0x048)
	248	#define HBUS_TARG_PRPH_WDAT (HBUS_BASE+0x04c)
	249	#define HBUS_TARG_PRPH_RDAT (HBUS_BASE+0x050)
	250
	251	/*
	252	* Per-Tx-queue write pointer (index, really!) (3945 and 4965).
	253	* Indicates index to next TFD that driver will fill (1 past latest filled).
	254	* Bit usage:
	255	* 0-7: queue write index
	256	* 11-8: queue selector
	257	*/
	258	#define HBUS_TARG_WRPTR (HBUS_BASE+0x060)
	259	#define HBUS_TARG_MBX_C (HBUS_BASE+0x030)
	260
	261	#define HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED (0x00000004)
	262
	263
6f83eaa1	264