Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* orinoco_cs.c (formerly known as dldwd_cs.c) |
2 | * | |
3 | * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such | |
4 | * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ | |
5 | * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others). | |
6 | * It should also be usable on various Prism II based cards such as the | |
7 | * Linksys, D-Link and Farallon Skyline. It should also work on Symbol | |
8 | * cards such as the 3Com AirConnect and Ericsson WLAN. | |
9 | * | |
10 | * Copyright notice & release notes in file orinoco.c | |
11 | */ | |
12 | ||
13 | #define DRIVER_NAME "orinoco_cs" | |
14 | #define PFX DRIVER_NAME ": " | |
15 | ||
16 | #include <linux/config.h> | |
1da177e4 LT |
17 | #include <linux/module.h> |
18 | #include <linux/kernel.h> | |
19 | #include <linux/init.h> | |
ef846bf0 | 20 | #include <linux/delay.h> |
1da177e4 LT |
21 | #include <pcmcia/cs_types.h> |
22 | #include <pcmcia/cs.h> | |
23 | #include <pcmcia/cistpl.h> | |
24 | #include <pcmcia/cisreg.h> | |
25 | #include <pcmcia/ds.h> | |
26 | ||
1da177e4 LT |
27 | #include "orinoco.h" |
28 | ||
29 | /********************************************************************/ | |
30 | /* Module stuff */ | |
31 | /********************************************************************/ | |
32 | ||
33 | MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>"); | |
34 | MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards"); | |
35 | MODULE_LICENSE("Dual MPL/GPL"); | |
36 | ||
37 | /* Module parameters */ | |
38 | ||
39 | /* Some D-Link cards have buggy CIS. They do work at 5v properly, but | |
40 | * don't have any CIS entry for it. This workaround it... */ | |
41 | static int ignore_cis_vcc; /* = 0 */ | |
42 | module_param(ignore_cis_vcc, int, 0); | |
43 | MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket"); | |
44 | ||
1da177e4 LT |
45 | /********************************************************************/ |
46 | /* Data structures */ | |
47 | /********************************************************************/ | |
48 | ||
49 | /* PCMCIA specific device information (goes in the card field of | |
50 | * struct orinoco_private */ | |
51 | struct orinoco_pccard { | |
52 | dev_link_t link; | |
53 | dev_node_t node; | |
54 | ||
55 | /* Used to handle hard reset */ | |
56 | /* yuck, we need this hack to work around the insanity of the | |
57 | * PCMCIA layer */ | |
58 | unsigned long hard_reset_in_progress; | |
59 | }; | |
60 | ||
1da177e4 LT |
61 | |
62 | /********************************************************************/ | |
63 | /* Function prototypes */ | |
64 | /********************************************************************/ | |
65 | ||
f8cfa618 | 66 | static void orinoco_cs_config(dev_link_t *link); |
393da598 | 67 | static void orinoco_cs_release(dev_link_t *link); |
cc3b4866 | 68 | static void orinoco_cs_detach(struct pcmcia_device *p_dev); |
1da177e4 LT |
69 | |
70 | /********************************************************************/ | |
71 | /* Device methods */ | |
72 | /********************************************************************/ | |
73 | ||
74 | static int | |
75 | orinoco_cs_hard_reset(struct orinoco_private *priv) | |
76 | { | |
77 | struct orinoco_pccard *card = priv->card; | |
78 | dev_link_t *link = &card->link; | |
79 | int err; | |
80 | ||
81 | /* We need atomic ops here, because we're not holding the lock */ | |
82 | set_bit(0, &card->hard_reset_in_progress); | |
83 | ||
84 | err = pcmcia_reset_card(link->handle, NULL); | |
85 | if (err) | |
86 | return err; | |
87 | ||
88 | msleep(100); | |
89 | clear_bit(0, &card->hard_reset_in_progress); | |
90 | ||
91 | return 0; | |
92 | } | |
93 | ||
94 | /********************************************************************/ | |
95 | /* PCMCIA stuff */ | |
96 | /********************************************************************/ | |
97 | ||
98 | /* | |
99 | * This creates an "instance" of the driver, allocating local data | |
100 | * structures for one device. The device is registered with Card | |
101 | * Services. | |
102 | * | |
103 | * The dev_link structure is initialized, but we don't actually | |
104 | * configure the card at this point -- we wait until we receive a card | |
105 | * insertion event. */ | |
f8cfa618 DB |
106 | static int |
107 | orinoco_cs_attach(struct pcmcia_device *p_dev) | |
1da177e4 LT |
108 | { |
109 | struct net_device *dev; | |
110 | struct orinoco_private *priv; | |
111 | struct orinoco_pccard *card; | |
112 | dev_link_t *link; | |
1da177e4 LT |
113 | |
114 | dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset); | |
115 | if (! dev) | |
f8cfa618 | 116 | return -ENOMEM; |
1da177e4 LT |
117 | priv = netdev_priv(dev); |
118 | card = priv->card; | |
119 | ||
120 | /* Link both structures together */ | |
121 | link = &card->link; | |
122 | link->priv = dev; | |
123 | ||
124 | /* Interrupt setup */ | |
125 | link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; | |
126 | link->irq.IRQInfo1 = IRQ_LEVEL_ID; | |
127 | link->irq.Handler = orinoco_interrupt; | |
128 | link->irq.Instance = dev; | |
129 | ||
130 | /* General socket configuration defaults can go here. In this | |
131 | * client, we assume very little, and rely on the CIS for | |
132 | * almost everything. In most clients, many details (i.e., | |
133 | * number, sizes, and attributes of IO windows) are fixed by | |
134 | * the nature of the device, and can be hard-wired here. */ | |
135 | link->conf.Attributes = 0; | |
136 | link->conf.IntType = INT_MEMORY_AND_IO; | |
137 | ||
138 | /* Register with Card Services */ | |
b4635811 | 139 | link->next = NULL; |
1da177e4 | 140 | |
f8cfa618 DB |
141 | link->handle = p_dev; |
142 | p_dev->instance = link; | |
1da177e4 | 143 | |
f8cfa618 DB |
144 | link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; |
145 | orinoco_cs_config(link); | |
1da177e4 | 146 | |
f8cfa618 | 147 | return 0; |
1da177e4 LT |
148 | } /* orinoco_cs_attach */ |
149 | ||
150 | /* | |
151 | * This deletes a driver "instance". The device is de-registered with | |
152 | * Card Services. If it has been released, all local data structures | |
153 | * are freed. Otherwise, the structures will be freed when the device | |
154 | * is released. | |
155 | */ | |
cc3b4866 | 156 | static void orinoco_cs_detach(struct pcmcia_device *p_dev) |
1da177e4 | 157 | { |
cc3b4866 | 158 | dev_link_t *link = dev_to_instance(p_dev); |
1da177e4 LT |
159 | struct net_device *dev = link->priv; |
160 | ||
1da177e4 LT |
161 | if (link->state & DEV_CONFIG) |
162 | orinoco_cs_release(link); | |
163 | ||
1da177e4 LT |
164 | DEBUG(0, PFX "detach: link=%p link->dev=%p\n", link, link->dev); |
165 | if (link->dev) { | |
166 | DEBUG(0, PFX "About to unregister net device %p\n", | |
167 | dev); | |
168 | unregister_netdev(dev); | |
169 | } | |
170 | free_orinocodev(dev); | |
171 | } /* orinoco_cs_detach */ | |
172 | ||
173 | /* | |
174 | * orinoco_cs_config() is scheduled to run after a CARD_INSERTION | |
175 | * event is received, to configure the PCMCIA socket, and to make the | |
176 | * device available to the system. | |
177 | */ | |
178 | ||
179 | #define CS_CHECK(fn, ret) do { \ | |
180 | last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \ | |
181 | } while (0) | |
182 | ||
183 | static void | |
184 | orinoco_cs_config(dev_link_t *link) | |
185 | { | |
186 | struct net_device *dev = link->priv; | |
187 | client_handle_t handle = link->handle; | |
188 | struct orinoco_private *priv = netdev_priv(dev); | |
189 | struct orinoco_pccard *card = priv->card; | |
190 | hermes_t *hw = &priv->hw; | |
191 | int last_fn, last_ret; | |
192 | u_char buf[64]; | |
193 | config_info_t conf; | |
194 | cisinfo_t info; | |
195 | tuple_t tuple; | |
196 | cisparse_t parse; | |
197 | void __iomem *mem; | |
198 | ||
199 | CS_CHECK(ValidateCIS, pcmcia_validate_cis(handle, &info)); | |
200 | ||
201 | /* | |
202 | * This reads the card's CONFIG tuple to find its | |
203 | * configuration registers. | |
204 | */ | |
205 | tuple.DesiredTuple = CISTPL_CONFIG; | |
206 | tuple.Attributes = 0; | |
207 | tuple.TupleData = buf; | |
208 | tuple.TupleDataMax = sizeof(buf); | |
209 | tuple.TupleOffset = 0; | |
210 | CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); | |
211 | CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); | |
212 | CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); | |
213 | link->conf.ConfigBase = parse.config.base; | |
214 | link->conf.Present = parse.config.rmask[0]; | |
215 | ||
216 | /* Configure card */ | |
217 | link->state |= DEV_CONFIG; | |
218 | ||
219 | /* Look up the current Vcc */ | |
220 | CS_CHECK(GetConfigurationInfo, | |
221 | pcmcia_get_configuration_info(handle, &conf)); | |
222 | link->conf.Vcc = conf.Vcc; | |
223 | ||
224 | /* | |
225 | * In this loop, we scan the CIS for configuration table | |
226 | * entries, each of which describes a valid card | |
227 | * configuration, including voltage, IO window, memory window, | |
228 | * and interrupt settings. | |
229 | * | |
230 | * We make no assumptions about the card to be configured: we | |
231 | * use just the information available in the CIS. In an ideal | |
232 | * world, this would work for any PCMCIA card, but it requires | |
233 | * a complete and accurate CIS. In practice, a driver usually | |
234 | * "knows" most of these things without consulting the CIS, | |
235 | * and most client drivers will only use the CIS to fill in | |
236 | * implementation-defined details. | |
237 | */ | |
238 | tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
239 | CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); | |
240 | while (1) { | |
241 | cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); | |
242 | cistpl_cftable_entry_t dflt = { .index = 0 }; | |
243 | ||
244 | if ( (pcmcia_get_tuple_data(handle, &tuple) != 0) | |
245 | || (pcmcia_parse_tuple(handle, &tuple, &parse) != 0)) | |
246 | goto next_entry; | |
247 | ||
248 | if (cfg->flags & CISTPL_CFTABLE_DEFAULT) | |
249 | dflt = *cfg; | |
250 | if (cfg->index == 0) | |
251 | goto next_entry; | |
252 | link->conf.ConfigIndex = cfg->index; | |
253 | ||
254 | /* Does this card need audio output? */ | |
255 | if (cfg->flags & CISTPL_CFTABLE_AUDIO) { | |
256 | link->conf.Attributes |= CONF_ENABLE_SPKR; | |
257 | link->conf.Status = CCSR_AUDIO_ENA; | |
258 | } | |
259 | ||
260 | /* Use power settings for Vcc and Vpp if present */ | |
261 | /* Note that the CIS values need to be rescaled */ | |
262 | if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { | |
263 | if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { | |
4f95af5b | 264 | DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); |
1da177e4 LT |
265 | if (!ignore_cis_vcc) |
266 | goto next_entry; | |
267 | } | |
268 | } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { | |
269 | if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) { | |
4f95af5b | 270 | DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000); |
1da177e4 LT |
271 | if(!ignore_cis_vcc) |
272 | goto next_entry; | |
273 | } | |
274 | } | |
275 | ||
276 | if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) | |
277 | link->conf.Vpp1 = link->conf.Vpp2 = | |
278 | cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; | |
279 | else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) | |
280 | link->conf.Vpp1 = link->conf.Vpp2 = | |
281 | dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; | |
282 | ||
283 | /* Do we need to allocate an interrupt? */ | |
284 | link->conf.Attributes |= CONF_ENABLE_IRQ; | |
285 | ||
286 | /* IO window settings */ | |
287 | link->io.NumPorts1 = link->io.NumPorts2 = 0; | |
288 | if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { | |
289 | cistpl_io_t *io = | |
290 | (cfg->io.nwin) ? &cfg->io : &dflt.io; | |
291 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; | |
292 | if (!(io->flags & CISTPL_IO_8BIT)) | |
293 | link->io.Attributes1 = | |
294 | IO_DATA_PATH_WIDTH_16; | |
295 | if (!(io->flags & CISTPL_IO_16BIT)) | |
296 | link->io.Attributes1 = | |
297 | IO_DATA_PATH_WIDTH_8; | |
298 | link->io.IOAddrLines = | |
299 | io->flags & CISTPL_IO_LINES_MASK; | |
300 | link->io.BasePort1 = io->win[0].base; | |
301 | link->io.NumPorts1 = io->win[0].len; | |
302 | if (io->nwin > 1) { | |
303 | link->io.Attributes2 = | |
304 | link->io.Attributes1; | |
305 | link->io.BasePort2 = io->win[1].base; | |
306 | link->io.NumPorts2 = io->win[1].len; | |
307 | } | |
308 | ||
309 | /* This reserves IO space but doesn't actually enable it */ | |
310 | if (pcmcia_request_io(link->handle, &link->io) != 0) | |
311 | goto next_entry; | |
312 | } | |
313 | ||
314 | ||
315 | /* If we got this far, we're cool! */ | |
316 | ||
317 | break; | |
318 | ||
319 | next_entry: | |
320 | if (link->io.NumPorts1) | |
321 | pcmcia_release_io(link->handle, &link->io); | |
322 | last_ret = pcmcia_get_next_tuple(handle, &tuple); | |
323 | if (last_ret == CS_NO_MORE_ITEMS) { | |
324 | printk(KERN_ERR PFX "GetNextTuple(): No matching " | |
325 | "CIS configuration. Maybe you need the " | |
326 | "ignore_cis_vcc=1 parameter.\n"); | |
327 | goto cs_failed; | |
328 | } | |
329 | } | |
330 | ||
331 | /* | |
332 | * Allocate an interrupt line. Note that this does not assign | |
333 | * a handler to the interrupt, unless the 'Handler' member of | |
334 | * the irq structure is initialized. | |
335 | */ | |
336 | CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq)); | |
337 | ||
338 | /* We initialize the hermes structure before completing PCMCIA | |
339 | * configuration just in case the interrupt handler gets | |
340 | * called. */ | |
341 | mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); | |
342 | if (!mem) | |
343 | goto cs_failed; | |
344 | ||
345 | hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); | |
346 | ||
347 | /* | |
348 | * This actually configures the PCMCIA socket -- setting up | |
349 | * the I/O windows and the interrupt mapping, and putting the | |
350 | * card and host interface into "Memory and IO" mode. | |
351 | */ | |
352 | CS_CHECK(RequestConfiguration, | |
353 | pcmcia_request_configuration(link->handle, &link->conf)); | |
354 | ||
355 | /* Ok, we have the configuration, prepare to register the netdev */ | |
356 | dev->base_addr = link->io.BasePort1; | |
357 | dev->irq = link->irq.AssignedIRQ; | |
358 | SET_MODULE_OWNER(dev); | |
359 | card->node.major = card->node.minor = 0; | |
360 | ||
361 | SET_NETDEV_DEV(dev, &handle_to_dev(handle)); | |
362 | /* Tell the stack we exist */ | |
363 | if (register_netdev(dev) != 0) { | |
364 | printk(KERN_ERR PFX "register_netdev() failed\n"); | |
365 | goto failed; | |
366 | } | |
367 | ||
368 | /* At this point, the dev_node_t structure(s) needs to be | |
369 | * initialized and arranged in a linked list at link->dev. */ | |
370 | strcpy(card->node.dev_name, dev->name); | |
371 | link->dev = &card->node; /* link->dev being non-NULL is also | |
372 | used to indicate that the | |
373 | net_device has been registered */ | |
374 | link->state &= ~DEV_CONFIG_PENDING; | |
375 | ||
376 | /* Finally, report what we've done */ | |
377 | printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d", | |
378 | dev->name, link->conf.ConfigIndex, | |
379 | link->conf.Vcc / 10, link->conf.Vcc % 10); | |
380 | if (link->conf.Vpp1) | |
381 | printk(", Vpp %d.%d", link->conf.Vpp1 / 10, | |
382 | link->conf.Vpp1 % 10); | |
383 | printk(", irq %d", link->irq.AssignedIRQ); | |
384 | if (link->io.NumPorts1) | |
385 | printk(", io 0x%04x-0x%04x", link->io.BasePort1, | |
386 | link->io.BasePort1 + link->io.NumPorts1 - 1); | |
387 | if (link->io.NumPorts2) | |
388 | printk(" & 0x%04x-0x%04x", link->io.BasePort2, | |
389 | link->io.BasePort2 + link->io.NumPorts2 - 1); | |
390 | printk("\n"); | |
391 | ||
392 | return; | |
393 | ||
394 | cs_failed: | |
395 | cs_error(link->handle, last_fn, last_ret); | |
396 | ||
397 | failed: | |
398 | orinoco_cs_release(link); | |
399 | } /* orinoco_cs_config */ | |
400 | ||
401 | /* | |
402 | * After a card is removed, orinoco_cs_release() will unregister the | |
403 | * device, and release the PCMCIA configuration. If the device is | |
404 | * still open, this will be postponed until it is closed. | |
405 | */ | |
406 | static void | |
407 | orinoco_cs_release(dev_link_t *link) | |
408 | { | |
409 | struct net_device *dev = link->priv; | |
410 | struct orinoco_private *priv = netdev_priv(dev); | |
411 | unsigned long flags; | |
412 | ||
413 | /* We're committed to taking the device away now, so mark the | |
414 | * hardware as unavailable */ | |
415 | spin_lock_irqsave(&priv->lock, flags); | |
416 | priv->hw_unavailable++; | |
417 | spin_unlock_irqrestore(&priv->lock, flags); | |
418 | ||
5f2a71fc | 419 | pcmcia_disable_device(link->handle); |
1da177e4 LT |
420 | if (priv->hw.iobase) |
421 | ioport_unmap(priv->hw.iobase); | |
422 | } /* orinoco_cs_release */ | |
423 | ||
98e4c28b DB |
424 | static int orinoco_cs_suspend(struct pcmcia_device *p_dev) |
425 | { | |
426 | dev_link_t *link = dev_to_instance(p_dev); | |
427 | struct net_device *dev = link->priv; | |
428 | struct orinoco_private *priv = netdev_priv(dev); | |
429 | struct orinoco_pccard *card = priv->card; | |
430 | int err = 0; | |
431 | unsigned long flags; | |
432 | ||
433 | link->state |= DEV_SUSPEND; | |
434 | if (link->state & DEV_CONFIG) { | |
435 | /* This is probably racy, but I can't think of | |
436 | a better way, short of rewriting the PCMCIA | |
437 | layer to not suck :-( */ | |
438 | if (! test_bit(0, &card->hard_reset_in_progress)) { | |
439 | spin_lock_irqsave(&priv->lock, flags); | |
440 | ||
441 | err = __orinoco_down(dev); | |
442 | if (err) | |
443 | printk(KERN_WARNING "%s: Error %d downing interface\n", | |
444 | dev->name, err); | |
445 | ||
446 | netif_device_detach(dev); | |
447 | priv->hw_unavailable++; | |
448 | ||
449 | spin_unlock_irqrestore(&priv->lock, flags); | |
450 | } | |
451 | ||
452 | pcmcia_release_configuration(link->handle); | |
453 | } | |
454 | ||
455 | return 0; | |
456 | } | |
457 | ||
458 | static int orinoco_cs_resume(struct pcmcia_device *p_dev) | |
459 | { | |
460 | dev_link_t *link = dev_to_instance(p_dev); | |
461 | struct net_device *dev = link->priv; | |
462 | struct orinoco_private *priv = netdev_priv(dev); | |
463 | struct orinoco_pccard *card = priv->card; | |
464 | int err = 0; | |
465 | unsigned long flags; | |
466 | ||
467 | link->state &= ~DEV_SUSPEND; | |
468 | if (link->state & DEV_CONFIG) { | |
469 | /* FIXME: should we double check that this is | |
470 | * the same card as we had before */ | |
471 | pcmcia_request_configuration(link->handle, &link->conf); | |
472 | ||
473 | if (! test_bit(0, &card->hard_reset_in_progress)) { | |
474 | err = orinoco_reinit_firmware(dev); | |
475 | if (err) { | |
476 | printk(KERN_ERR "%s: Error %d re-initializing firmware\n", | |
477 | dev->name, err); | |
478 | return -EIO; | |
479 | } | |
480 | ||
481 | spin_lock_irqsave(&priv->lock, flags); | |
482 | ||
483 | netif_device_attach(dev); | |
484 | priv->hw_unavailable--; | |
485 | ||
486 | if (priv->open && ! priv->hw_unavailable) { | |
487 | err = __orinoco_up(dev); | |
488 | if (err) | |
489 | printk(KERN_ERR "%s: Error %d restarting card\n", | |
490 | dev->name, err); | |
491 | } | |
492 | ||
493 | spin_unlock_irqrestore(&priv->lock, flags); | |
494 | } | |
495 | } | |
496 | ||
497 | return 0; | |
498 | } | |
499 | ||
500 | ||
1da177e4 LT |
501 | /********************************************************************/ |
502 | /* Module initialization */ | |
503 | /********************************************************************/ | |
504 | ||
505 | /* Can't be declared "const" or the whole __initdata section will | |
506 | * become const */ | |
507 | static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION | |
508 | " (David Gibson <hermes@gibson.dropbear.id.au>, " | |
509 | "Pavel Roskin <proski@gnu.org>, et al)"; | |
510 | ||
7422c56d | 511 | static struct pcmcia_device_id orinoco_cs_ids[] = { |
9c8a11d7 PR |
512 | PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */ |
513 | PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */ | |
514 | PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */ | |
515 | PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ | |
516 | PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */ | |
517 | PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */ | |
518 | PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */ | |
519 | PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */ | |
520 | PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */ | |
521 | PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */ | |
522 | PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */ | |
523 | PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */ | |
524 | PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */ | |
525 | PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */ | |
526 | PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */ | |
527 | PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */ | |
528 | PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */ | |
529 | PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */ | |
530 | PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */ | |
531 | PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */ | |
532 | PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */ | |
533 | PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */ | |
534 | PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */ | |
535 | PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */ | |
536 | PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */ | |
537 | PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */ | |
538 | PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */ | |
539 | PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9), | |
7422c56d | 540 | PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), |
7422c56d | 541 | PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5), |
9c8a11d7 PR |
542 | PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2), |
543 | PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092), | |
544 | PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f), | |
545 | PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842), | |
546 | PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e), | |
7422c56d | 547 | PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169), |
9c8a11d7 | 548 | PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb), |
7422c56d | 549 | PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3), |
9c8a11d7 | 550 | PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18), |
7422c56d | 551 | PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90), |
9c8a11d7 PR |
552 | PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b), |
553 | PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39), | |
7422c56d DB |
554 | PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584), |
555 | PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9), | |
f39a4aa5 | 556 | PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae), |
7422c56d DB |
557 | PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac), |
558 | PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab), | |
9c8a11d7 PR |
559 | PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916), |
560 | PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146), | |
7422c56d DB |
561 | PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3), |
562 | PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c), | |
9c8a11d7 PR |
563 | PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), |
564 | PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077), | |
7422c56d | 565 | PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18), |
9c8a11d7 PR |
566 | PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77), |
567 | PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf), | |
568 | PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2), | |
569 | PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92), | |
570 | PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395), | |
7422c56d DB |
571 | PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a), |
572 | PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410), | |
573 | PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3), | |
574 | PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01), | |
575 | PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a), | |
9c8a11d7 | 576 | PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1), |
7422c56d | 577 | PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1), |
9c8a11d7 PR |
578 | PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767), |
579 | PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6), | |
580 | PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed), | |
581 | PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39), | |
7422c56d | 582 | PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264), |
9c8a11d7 | 583 | PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178), |
7422c56d DB |
584 | PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9), |
585 | PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26), | |
586 | PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b), | |
8f6da52a | 587 | PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757), |
9c8a11d7 PR |
588 | PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a), |
589 | PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e), | |
590 | PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39), | |
591 | PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee), | |
7422c56d DB |
592 | PCMCIA_DEVICE_NULL, |
593 | }; | |
594 | MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); | |
595 | ||
1da177e4 LT |
596 | static struct pcmcia_driver orinoco_driver = { |
597 | .owner = THIS_MODULE, | |
598 | .drv = { | |
599 | .name = DRIVER_NAME, | |
600 | }, | |
f8cfa618 | 601 | .probe = orinoco_cs_attach, |
cc3b4866 | 602 | .remove = orinoco_cs_detach, |
7422c56d | 603 | .id_table = orinoco_cs_ids, |
98e4c28b DB |
604 | .suspend = orinoco_cs_suspend, |
605 | .resume = orinoco_cs_resume, | |
1da177e4 LT |
606 | }; |
607 | ||
608 | static int __init | |
609 | init_orinoco_cs(void) | |
610 | { | |
611 | printk(KERN_DEBUG "%s\n", version); | |
612 | ||
613 | return pcmcia_register_driver(&orinoco_driver); | |
614 | } | |
615 | ||
616 | static void __exit | |
617 | exit_orinoco_cs(void) | |
618 | { | |
619 | pcmcia_unregister_driver(&orinoco_driver); | |
1da177e4 LT |
620 | } |
621 | ||
622 | module_init(init_orinoco_cs); | |
623 | module_exit(exit_orinoco_cs); |