Commit | Line | Data |
---|---|---|
95ea3627 ID |
1 | /* |
2 | Copyright (C) 2004 - 2007 rt2x00 SourceForge Project | |
3 | <http://rt2x00.serialmonkey.com> | |
4 | ||
5 | This program is free software; you can redistribute it and/or modify | |
6 | it under the terms of the GNU General Public License as published by | |
7 | the Free Software Foundation; either version 2 of the License, or | |
8 | (at your option) any later version. | |
9 | ||
10 | This program is distributed in the hope that it will be useful, | |
11 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 | GNU General Public License for more details. | |
14 | ||
15 | You should have received a copy of the GNU General Public License | |
16 | along with this program; if not, write to the | |
17 | Free Software Foundation, Inc., | |
18 | 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
19 | */ | |
20 | ||
21 | /* | |
22 | Module: rt2500pci | |
23 | Abstract: rt2500pci device specific routines. | |
24 | Supported chipsets: RT2560. | |
25 | */ | |
26 | ||
27 | /* | |
28 | * Set enviroment defines for rt2x00.h | |
29 | */ | |
30 | #define DRV_NAME "rt2500pci" | |
31 | ||
32 | #include <linux/delay.h> | |
33 | #include <linux/etherdevice.h> | |
34 | #include <linux/init.h> | |
35 | #include <linux/kernel.h> | |
36 | #include <linux/module.h> | |
37 | #include <linux/pci.h> | |
38 | #include <linux/eeprom_93cx6.h> | |
39 | ||
40 | #include "rt2x00.h" | |
41 | #include "rt2x00pci.h" | |
42 | #include "rt2500pci.h" | |
43 | ||
44 | /* | |
45 | * Register access. | |
46 | * All access to the CSR registers will go through the methods | |
47 | * rt2x00pci_register_read and rt2x00pci_register_write. | |
48 | * BBP and RF register require indirect register access, | |
49 | * and use the CSR registers BBPCSR and RFCSR to achieve this. | |
50 | * These indirect registers work with busy bits, | |
51 | * and we will try maximal REGISTER_BUSY_COUNT times to access | |
52 | * the register while taking a REGISTER_BUSY_DELAY us delay | |
53 | * between each attampt. When the busy bit is still set at that time, | |
54 | * the access attempt is considered to have failed, | |
55 | * and we will print an error. | |
56 | */ | |
57 | static u32 rt2500pci_bbp_check(const struct rt2x00_dev *rt2x00dev) | |
58 | { | |
59 | u32 reg; | |
60 | unsigned int i; | |
61 | ||
62 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | |
63 | rt2x00pci_register_read(rt2x00dev, BBPCSR, ®); | |
64 | if (!rt2x00_get_field32(reg, BBPCSR_BUSY)) | |
65 | break; | |
66 | udelay(REGISTER_BUSY_DELAY); | |
67 | } | |
68 | ||
69 | return reg; | |
70 | } | |
71 | ||
72 | static void rt2500pci_bbp_write(const struct rt2x00_dev *rt2x00dev, | |
73 | const unsigned int word, const u8 value) | |
74 | { | |
75 | u32 reg; | |
76 | ||
77 | /* | |
78 | * Wait until the BBP becomes ready. | |
79 | */ | |
80 | reg = rt2500pci_bbp_check(rt2x00dev); | |
81 | if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { | |
82 | ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n"); | |
83 | return; | |
84 | } | |
85 | ||
86 | /* | |
87 | * Write the data into the BBP. | |
88 | */ | |
89 | reg = 0; | |
90 | rt2x00_set_field32(®, BBPCSR_VALUE, value); | |
91 | rt2x00_set_field32(®, BBPCSR_REGNUM, word); | |
92 | rt2x00_set_field32(®, BBPCSR_BUSY, 1); | |
93 | rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); | |
94 | ||
95 | rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); | |
96 | } | |
97 | ||
98 | static void rt2500pci_bbp_read(const struct rt2x00_dev *rt2x00dev, | |
99 | const unsigned int word, u8 *value) | |
100 | { | |
101 | u32 reg; | |
102 | ||
103 | /* | |
104 | * Wait until the BBP becomes ready. | |
105 | */ | |
106 | reg = rt2500pci_bbp_check(rt2x00dev); | |
107 | if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { | |
108 | ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); | |
109 | return; | |
110 | } | |
111 | ||
112 | /* | |
113 | * Write the request into the BBP. | |
114 | */ | |
115 | reg = 0; | |
116 | rt2x00_set_field32(®, BBPCSR_REGNUM, word); | |
117 | rt2x00_set_field32(®, BBPCSR_BUSY, 1); | |
118 | rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); | |
119 | ||
120 | rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); | |
121 | ||
122 | /* | |
123 | * Wait until the BBP becomes ready. | |
124 | */ | |
125 | reg = rt2500pci_bbp_check(rt2x00dev); | |
126 | if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { | |
127 | ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); | |
128 | *value = 0xff; | |
129 | return; | |
130 | } | |
131 | ||
132 | *value = rt2x00_get_field32(reg, BBPCSR_VALUE); | |
133 | } | |
134 | ||
135 | static void rt2500pci_rf_write(const struct rt2x00_dev *rt2x00dev, | |
136 | const unsigned int word, const u32 value) | |
137 | { | |
138 | u32 reg; | |
139 | unsigned int i; | |
140 | ||
141 | if (!word) | |
142 | return; | |
143 | ||
144 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | |
145 | rt2x00pci_register_read(rt2x00dev, RFCSR, ®); | |
146 | if (!rt2x00_get_field32(reg, RFCSR_BUSY)) | |
147 | goto rf_write; | |
148 | udelay(REGISTER_BUSY_DELAY); | |
149 | } | |
150 | ||
151 | ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n"); | |
152 | return; | |
153 | ||
154 | rf_write: | |
155 | reg = 0; | |
156 | rt2x00_set_field32(®, RFCSR_VALUE, value); | |
157 | rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); | |
158 | rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); | |
159 | rt2x00_set_field32(®, RFCSR_BUSY, 1); | |
160 | ||
161 | rt2x00pci_register_write(rt2x00dev, RFCSR, reg); | |
162 | rt2x00_rf_write(rt2x00dev, word, value); | |
163 | } | |
164 | ||
165 | static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom) | |
166 | { | |
167 | struct rt2x00_dev *rt2x00dev = eeprom->data; | |
168 | u32 reg; | |
169 | ||
170 | rt2x00pci_register_read(rt2x00dev, CSR21, ®); | |
171 | ||
172 | eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN); | |
173 | eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT); | |
174 | eeprom->reg_data_clock = | |
175 | !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK); | |
176 | eeprom->reg_chip_select = | |
177 | !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT); | |
178 | } | |
179 | ||
180 | static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom) | |
181 | { | |
182 | struct rt2x00_dev *rt2x00dev = eeprom->data; | |
183 | u32 reg = 0; | |
184 | ||
185 | rt2x00_set_field32(®, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in); | |
186 | rt2x00_set_field32(®, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out); | |
187 | rt2x00_set_field32(®, CSR21_EEPROM_DATA_CLOCK, | |
188 | !!eeprom->reg_data_clock); | |
189 | rt2x00_set_field32(®, CSR21_EEPROM_CHIP_SELECT, | |
190 | !!eeprom->reg_chip_select); | |
191 | ||
192 | rt2x00pci_register_write(rt2x00dev, CSR21, reg); | |
193 | } | |
194 | ||
195 | #ifdef CONFIG_RT2X00_LIB_DEBUGFS | |
196 | #define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) | |
197 | ||
198 | static void rt2500pci_read_csr(const struct rt2x00_dev *rt2x00dev, | |
199 | const unsigned int word, u32 *data) | |
200 | { | |
201 | rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data); | |
202 | } | |
203 | ||
204 | static void rt2500pci_write_csr(const struct rt2x00_dev *rt2x00dev, | |
205 | const unsigned int word, u32 data) | |
206 | { | |
207 | rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data); | |
208 | } | |
209 | ||
210 | static const struct rt2x00debug rt2500pci_rt2x00debug = { | |
211 | .owner = THIS_MODULE, | |
212 | .csr = { | |
213 | .read = rt2500pci_read_csr, | |
214 | .write = rt2500pci_write_csr, | |
215 | .word_size = sizeof(u32), | |
216 | .word_count = CSR_REG_SIZE / sizeof(u32), | |
217 | }, | |
218 | .eeprom = { | |
219 | .read = rt2x00_eeprom_read, | |
220 | .write = rt2x00_eeprom_write, | |
221 | .word_size = sizeof(u16), | |
222 | .word_count = EEPROM_SIZE / sizeof(u16), | |
223 | }, | |
224 | .bbp = { | |
225 | .read = rt2500pci_bbp_read, | |
226 | .write = rt2500pci_bbp_write, | |
227 | .word_size = sizeof(u8), | |
228 | .word_count = BBP_SIZE / sizeof(u8), | |
229 | }, | |
230 | .rf = { | |
231 | .read = rt2x00_rf_read, | |
232 | .write = rt2500pci_rf_write, | |
233 | .word_size = sizeof(u32), | |
234 | .word_count = RF_SIZE / sizeof(u32), | |
235 | }, | |
236 | }; | |
237 | #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ | |
238 | ||
239 | #ifdef CONFIG_RT2500PCI_RFKILL | |
240 | static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) | |
241 | { | |
242 | u32 reg; | |
243 | ||
244 | rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®); | |
245 | return rt2x00_get_field32(reg, GPIOCSR_BIT0); | |
246 | } | |
247 | #endif /* CONFIG_RT2400PCI_RFKILL */ | |
248 | ||
249 | /* | |
250 | * Configuration handlers. | |
251 | */ | |
252 | static void rt2500pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr) | |
253 | { | |
254 | __le32 reg[2]; | |
255 | ||
256 | memset(®, 0, sizeof(reg)); | |
257 | memcpy(®, addr, ETH_ALEN); | |
258 | ||
259 | /* | |
260 | * The MAC address is passed to us as an array of bytes, | |
261 | * that array is little endian, so no need for byte ordering. | |
262 | */ | |
263 | rt2x00pci_register_multiwrite(rt2x00dev, CSR3, ®, sizeof(reg)); | |
264 | } | |
265 | ||
266 | static void rt2500pci_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid) | |
267 | { | |
268 | __le32 reg[2]; | |
269 | ||
270 | memset(®, 0, sizeof(reg)); | |
271 | memcpy(®, bssid, ETH_ALEN); | |
272 | ||
273 | /* | |
274 | * The BSSID is passed to us as an array of bytes, | |
275 | * that array is little endian, so no need for byte ordering. | |
276 | */ | |
277 | rt2x00pci_register_multiwrite(rt2x00dev, CSR5, ®, sizeof(reg)); | |
278 | } | |
279 | ||
280 | static void rt2500pci_config_packet_filter(struct rt2x00_dev *rt2x00dev, | |
281 | const unsigned int filter) | |
282 | { | |
283 | int promisc = !!(filter & IFF_PROMISC); | |
284 | int multicast = !!(filter & IFF_MULTICAST); | |
285 | int broadcast = !!(filter & IFF_BROADCAST); | |
286 | u32 reg; | |
287 | ||
288 | rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); | |
289 | rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, !promisc); | |
290 | rt2x00_set_field32(®, RXCSR0_DROP_MCAST, !multicast); | |
291 | rt2x00_set_field32(®, RXCSR0_DROP_BCAST, !broadcast); | |
292 | rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); | |
293 | } | |
294 | ||
295 | static void rt2500pci_config_type(struct rt2x00_dev *rt2x00dev, const int type) | |
296 | { | |
297 | u32 reg; | |
298 | ||
299 | rt2x00pci_register_write(rt2x00dev, CSR14, 0); | |
300 | ||
301 | /* | |
302 | * Apply hardware packet filter. | |
303 | */ | |
304 | rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); | |
305 | ||
306 | if (!is_monitor_present(&rt2x00dev->interface) && | |
307 | (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA)) | |
308 | rt2x00_set_field32(®, RXCSR0_DROP_TODS, 1); | |
309 | else | |
310 | rt2x00_set_field32(®, RXCSR0_DROP_TODS, 0); | |
311 | ||
312 | /* | |
313 | * If there is a non-monitor interface present | |
314 | * the packet should be strict (even if a monitor interface is present!). | |
315 | * When there is only 1 interface present which is in monitor mode | |
316 | * we should start accepting _all_ frames. | |
317 | */ | |
318 | if (is_interface_present(&rt2x00dev->interface)) { | |
319 | rt2x00_set_field32(®, RXCSR0_DROP_CRC, 1); | |
320 | rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, 1); | |
321 | rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, 1); | |
322 | rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); | |
323 | } else if (is_monitor_present(&rt2x00dev->interface)) { | |
324 | rt2x00_set_field32(®, RXCSR0_DROP_CRC, 0); | |
325 | rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, 0); | |
326 | rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, 0); | |
327 | rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 0); | |
328 | } | |
329 | ||
330 | rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); | |
331 | ||
332 | /* | |
333 | * Enable beacon config | |
334 | */ | |
335 | rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®); | |
336 | rt2x00_set_field32(®, BCNCSR1_PRELOAD, | |
337 | PREAMBLE + get_duration(IEEE80211_HEADER, 2)); | |
338 | rt2x00_set_field32(®, BCNCSR1_BEACON_CWMIN, | |
339 | rt2x00lib_get_ring(rt2x00dev, | |
340 | IEEE80211_TX_QUEUE_BEACON) | |
341 | ->tx_params.cw_min); | |
342 | rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg); | |
343 | ||
344 | /* | |
345 | * Enable synchronisation. | |
346 | */ | |
347 | rt2x00pci_register_read(rt2x00dev, CSR14, ®); | |
348 | if (is_interface_present(&rt2x00dev->interface)) { | |
349 | rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); | |
350 | rt2x00_set_field32(®, CSR14_TBCN, 1); | |
351 | } | |
352 | ||
353 | rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); | |
354 | if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP) | |
355 | rt2x00_set_field32(®, CSR14_TSF_SYNC, 2); | |
356 | else if (type == IEEE80211_IF_TYPE_STA) | |
357 | rt2x00_set_field32(®, CSR14_TSF_SYNC, 1); | |
358 | else if (is_monitor_present(&rt2x00dev->interface) && | |
359 | !is_interface_present(&rt2x00dev->interface)) | |
360 | rt2x00_set_field32(®, CSR14_TSF_SYNC, 0); | |
361 | ||
362 | rt2x00pci_register_write(rt2x00dev, CSR14, reg); | |
363 | } | |
364 | ||
365 | static void rt2500pci_config_rate(struct rt2x00_dev *rt2x00dev, const int rate) | |
366 | { | |
367 | struct ieee80211_conf *conf = &rt2x00dev->hw->conf; | |
368 | u32 reg; | |
369 | u32 preamble; | |
370 | u16 value; | |
371 | ||
372 | if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE)) | |
373 | preamble = SHORT_PREAMBLE; | |
374 | else | |
375 | preamble = PREAMBLE; | |
376 | ||
377 | reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK; | |
378 | rt2x00pci_register_write(rt2x00dev, ARCSR1, reg); | |
379 | ||
380 | rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); | |
381 | value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ? | |
382 | SHORT_DIFS : DIFS) + | |
383 | PLCP + preamble + get_duration(ACK_SIZE, 10); | |
384 | rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, value); | |
385 | value = SIFS + PLCP + preamble + get_duration(ACK_SIZE, 10); | |
386 | rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, value); | |
387 | rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); | |
388 | ||
389 | preamble = DEVICE_GET_RATE_FIELD(rate, PREAMBLE) ? 0x08 : 0x00; | |
390 | ||
391 | rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); | |
392 | rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00 | preamble); | |
393 | rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); | |
394 | rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10)); | |
395 | rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); | |
396 | ||
397 | rt2x00pci_register_read(rt2x00dev, ARCSR3, ®); | |
398 | rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble); | |
399 | rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); | |
400 | rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20)); | |
401 | rt2x00pci_register_write(rt2x00dev, ARCSR3, reg); | |
402 | ||
403 | rt2x00pci_register_read(rt2x00dev, ARCSR4, ®); | |
404 | rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble); | |
405 | rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); | |
406 | rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55)); | |
407 | rt2x00pci_register_write(rt2x00dev, ARCSR4, reg); | |
408 | ||
409 | rt2x00pci_register_read(rt2x00dev, ARCSR5, ®); | |
410 | rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble); | |
411 | rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); | |
412 | rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110)); | |
413 | rt2x00pci_register_write(rt2x00dev, ARCSR5, reg); | |
414 | } | |
415 | ||
416 | static void rt2500pci_config_phymode(struct rt2x00_dev *rt2x00dev, | |
417 | const int phymode) | |
418 | { | |
419 | struct ieee80211_hw_mode *mode; | |
420 | struct ieee80211_rate *rate; | |
421 | ||
422 | if (phymode == MODE_IEEE80211A) | |
423 | rt2x00dev->curr_hwmode = HWMODE_A; | |
424 | else if (phymode == MODE_IEEE80211B) | |
425 | rt2x00dev->curr_hwmode = HWMODE_B; | |
426 | else | |
427 | rt2x00dev->curr_hwmode = HWMODE_G; | |
428 | ||
429 | mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode]; | |
430 | rate = &mode->rates[mode->num_rates - 1]; | |
431 | ||
432 | rt2500pci_config_rate(rt2x00dev, rate->val2); | |
433 | } | |
434 | ||
435 | static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev, | |
436 | const int index, const int channel, | |
437 | const int txpower) | |
438 | { | |
439 | struct rf_channel reg; | |
440 | u8 r70; | |
441 | ||
442 | /* | |
443 | * Fill rf_reg structure. | |
444 | */ | |
445 | memcpy(®, &rt2x00dev->spec.channels[index], sizeof(reg)); | |
446 | ||
447 | /* | |
448 | * Set TXpower. | |
449 | */ | |
450 | rt2x00_set_field32(®.rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); | |
451 | ||
452 | /* | |
453 | * Switch on tuning bits. | |
454 | * For RT2523 devices we do not need to update the R1 register. | |
455 | */ | |
456 | if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) | |
457 | rt2x00_set_field32(®.rf1, RF1_TUNER, 1); | |
458 | rt2x00_set_field32(®.rf3, RF3_TUNER, 1); | |
459 | ||
460 | /* | |
461 | * For RT2525 we should first set the channel to half band higher. | |
462 | */ | |
463 | if (rt2x00_rf(&rt2x00dev->chip, RF2525)) { | |
464 | static const u32 vals[] = { | |
465 | 0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a, | |
466 | 0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a, | |
467 | 0x00080d1e, 0x00080d22, 0x00080d26, 0x00080d2a, | |
468 | 0x00080d2e, 0x00080d3a | |
469 | }; | |
470 | ||
471 | rt2500pci_rf_write(rt2x00dev, 1, reg.rf1); | |
472 | rt2500pci_rf_write(rt2x00dev, 2, vals[channel - 1]); | |
473 | rt2500pci_rf_write(rt2x00dev, 3, reg.rf3); | |
474 | if (reg.rf4) | |
475 | rt2500pci_rf_write(rt2x00dev, 4, reg.rf4); | |
476 | } | |
477 | ||
478 | rt2500pci_rf_write(rt2x00dev, 1, reg.rf1); | |
479 | rt2500pci_rf_write(rt2x00dev, 2, reg.rf2); | |
480 | rt2500pci_rf_write(rt2x00dev, 3, reg.rf3); | |
481 | if (reg.rf4) | |
482 | rt2500pci_rf_write(rt2x00dev, 4, reg.rf4); | |
483 | ||
484 | /* | |
485 | * Channel 14 requires the Japan filter bit to be set. | |
486 | */ | |
487 | r70 = 0x46; | |
488 | rt2x00_set_field8(&r70, BBP_R70_JAPAN_FILTER, channel == 14); | |
489 | rt2500pci_bbp_write(rt2x00dev, 70, r70); | |
490 | ||
491 | msleep(1); | |
492 | ||
493 | /* | |
494 | * Switch off tuning bits. | |
495 | * For RT2523 devices we do not need to update the R1 register. | |
496 | */ | |
497 | if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) { | |
498 | rt2x00_set_field32(®.rf1, RF1_TUNER, 0); | |
499 | rt2500pci_rf_write(rt2x00dev, 1, reg.rf1); | |
500 | } | |
501 | ||
502 | rt2x00_set_field32(®.rf3, RF3_TUNER, 0); | |
503 | rt2500pci_rf_write(rt2x00dev, 3, reg.rf3); | |
504 | ||
505 | /* | |
506 | * Clear false CRC during channel switch. | |
507 | */ | |
508 | rt2x00pci_register_read(rt2x00dev, CNT0, ®.rf1); | |
509 | } | |
510 | ||
511 | static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev, | |
512 | const int txpower) | |
513 | { | |
514 | u32 rf3; | |
515 | ||
516 | rt2x00_rf_read(rt2x00dev, 3, &rf3); | |
517 | rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); | |
518 | rt2500pci_rf_write(rt2x00dev, 3, rf3); | |
519 | } | |
520 | ||
521 | static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, | |
522 | const int antenna_tx, const int antenna_rx) | |
523 | { | |
524 | u32 reg; | |
525 | u8 r14; | |
526 | u8 r2; | |
527 | ||
528 | rt2x00pci_register_read(rt2x00dev, BBPCSR1, ®); | |
529 | rt2500pci_bbp_read(rt2x00dev, 14, &r14); | |
530 | rt2500pci_bbp_read(rt2x00dev, 2, &r2); | |
531 | ||
532 | /* | |
533 | * Configure the TX antenna. | |
534 | */ | |
535 | switch (antenna_tx) { | |
536 | case ANTENNA_SW_DIVERSITY: | |
537 | case ANTENNA_HW_DIVERSITY: | |
538 | rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); | |
539 | rt2x00_set_field32(®, BBPCSR1_CCK, 2); | |
540 | rt2x00_set_field32(®, BBPCSR1_OFDM, 2); | |
541 | break; | |
542 | case ANTENNA_A: | |
543 | rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0); | |
544 | rt2x00_set_field32(®, BBPCSR1_CCK, 0); | |
545 | rt2x00_set_field32(®, BBPCSR1_OFDM, 0); | |
546 | break; | |
547 | case ANTENNA_B: | |
548 | rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); | |
549 | rt2x00_set_field32(®, BBPCSR1_CCK, 2); | |
550 | rt2x00_set_field32(®, BBPCSR1_OFDM, 2); | |
551 | break; | |
552 | } | |
553 | ||
554 | /* | |
555 | * Configure the RX antenna. | |
556 | */ | |
557 | switch (antenna_rx) { | |
558 | case ANTENNA_SW_DIVERSITY: | |
559 | case ANTENNA_HW_DIVERSITY: | |
560 | rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); | |
561 | break; | |
562 | case ANTENNA_A: | |
563 | rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0); | |
564 | break; | |
565 | case ANTENNA_B: | |
566 | rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); | |
567 | break; | |
568 | } | |
569 | ||
570 | /* | |
571 | * RT2525E and RT5222 need to flip TX I/Q | |
572 | */ | |
573 | if (rt2x00_rf(&rt2x00dev->chip, RF2525E) || | |
574 | rt2x00_rf(&rt2x00dev->chip, RF5222)) { | |
575 | rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1); | |
576 | rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 1); | |
577 | rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 1); | |
578 | ||
579 | /* | |
580 | * RT2525E does not need RX I/Q Flip. | |
581 | */ | |
582 | if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) | |
583 | rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0); | |
584 | } else { | |
585 | rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 0); | |
586 | rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 0); | |
587 | } | |
588 | ||
589 | rt2x00pci_register_write(rt2x00dev, BBPCSR1, reg); | |
590 | rt2500pci_bbp_write(rt2x00dev, 14, r14); | |
591 | rt2500pci_bbp_write(rt2x00dev, 2, r2); | |
592 | } | |
593 | ||
594 | static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev, | |
595 | const int short_slot_time, | |
596 | const int beacon_int) | |
597 | { | |
598 | u32 reg; | |
599 | ||
600 | rt2x00pci_register_read(rt2x00dev, CSR11, ®); | |
601 | rt2x00_set_field32(®, CSR11_SLOT_TIME, | |
602 | short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME); | |
603 | rt2x00pci_register_write(rt2x00dev, CSR11, reg); | |
604 | ||
605 | rt2x00pci_register_read(rt2x00dev, CSR18, ®); | |
606 | rt2x00_set_field32(®, CSR18_SIFS, SIFS); | |
607 | rt2x00_set_field32(®, CSR18_PIFS, | |
608 | short_slot_time ? SHORT_PIFS : PIFS); | |
609 | rt2x00pci_register_write(rt2x00dev, CSR18, reg); | |
610 | ||
611 | rt2x00pci_register_read(rt2x00dev, CSR19, ®); | |
612 | rt2x00_set_field32(®, CSR19_DIFS, | |
613 | short_slot_time ? SHORT_DIFS : DIFS); | |
614 | rt2x00_set_field32(®, CSR19_EIFS, EIFS); | |
615 | rt2x00pci_register_write(rt2x00dev, CSR19, reg); | |
616 | ||
617 | rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); | |
618 | rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); | |
619 | rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); | |
620 | rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); | |
621 | ||
622 | rt2x00pci_register_read(rt2x00dev, CSR12, ®); | |
623 | rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, beacon_int * 16); | |
624 | rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, beacon_int * 16); | |
625 | rt2x00pci_register_write(rt2x00dev, CSR12, reg); | |
626 | } | |
627 | ||
628 | static void rt2500pci_config(struct rt2x00_dev *rt2x00dev, | |
629 | const unsigned int flags, | |
630 | struct ieee80211_conf *conf) | |
631 | { | |
632 | int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME; | |
633 | ||
634 | if (flags & CONFIG_UPDATE_PHYMODE) | |
635 | rt2500pci_config_phymode(rt2x00dev, conf->phymode); | |
636 | if (flags & CONFIG_UPDATE_CHANNEL) | |
637 | rt2500pci_config_channel(rt2x00dev, conf->channel_val, | |
638 | conf->channel, conf->power_level); | |
639 | if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) | |
640 | rt2500pci_config_txpower(rt2x00dev, conf->power_level); | |
641 | if (flags & CONFIG_UPDATE_ANTENNA) | |
642 | rt2500pci_config_antenna(rt2x00dev, conf->antenna_sel_tx, | |
643 | conf->antenna_sel_rx); | |
644 | if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) | |
645 | rt2500pci_config_duration(rt2x00dev, short_slot_time, | |
646 | conf->beacon_int); | |
647 | } | |
648 | ||
649 | /* | |
650 | * LED functions. | |
651 | */ | |
652 | static void rt2500pci_enable_led(struct rt2x00_dev *rt2x00dev) | |
653 | { | |
654 | u32 reg; | |
655 | ||
656 | rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); | |
657 | ||
658 | rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70); | |
659 | rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30); | |
660 | ||
661 | if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) { | |
662 | rt2x00_set_field32(®, LEDCSR_LINK, 1); | |
663 | rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0); | |
664 | } else if (rt2x00dev->led_mode == LED_MODE_ASUS) { | |
665 | rt2x00_set_field32(®, LEDCSR_LINK, 0); | |
666 | rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1); | |
667 | } else { | |
668 | rt2x00_set_field32(®, LEDCSR_LINK, 1); | |
669 | rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1); | |
670 | } | |
671 | ||
672 | rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); | |
673 | } | |
674 | ||
675 | static void rt2500pci_disable_led(struct rt2x00_dev *rt2x00dev) | |
676 | { | |
677 | u32 reg; | |
678 | ||
679 | rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); | |
680 | rt2x00_set_field32(®, LEDCSR_LINK, 0); | |
681 | rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0); | |
682 | rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); | |
683 | } | |
684 | ||
685 | /* | |
686 | * Link tuning | |
687 | */ | |
688 | static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev) | |
689 | { | |
690 | u32 reg; | |
691 | ||
692 | /* | |
693 | * Update FCS error count from register. | |
694 | */ | |
695 | rt2x00pci_register_read(rt2x00dev, CNT0, ®); | |
696 | rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR); | |
697 | ||
698 | /* | |
699 | * Update False CCA count from register. | |
700 | */ | |
701 | rt2x00pci_register_read(rt2x00dev, CNT3, ®); | |
702 | rt2x00dev->link.false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA); | |
703 | } | |
704 | ||
705 | static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev) | |
706 | { | |
707 | rt2500pci_bbp_write(rt2x00dev, 17, 0x48); | |
708 | rt2x00dev->link.vgc_level = 0x48; | |
709 | } | |
710 | ||
711 | static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev) | |
712 | { | |
713 | int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); | |
714 | u8 r17; | |
715 | ||
716 | /* | |
717 | * To prevent collisions with MAC ASIC on chipsets | |
718 | * up to version C the link tuning should halt after 20 | |
719 | * seconds. | |
720 | */ | |
721 | if (rt2x00_get_rev(&rt2x00dev->chip) < RT2560_VERSION_D && | |
722 | rt2x00dev->link.count > 20) | |
723 | return; | |
724 | ||
725 | rt2500pci_bbp_read(rt2x00dev, 17, &r17); | |
726 | ||
727 | /* | |
728 | * Chipset versions C and lower should directly continue | |
729 | * to the dynamic CCA tuning. | |
730 | */ | |
731 | if (rt2x00_get_rev(&rt2x00dev->chip) < RT2560_VERSION_D) | |
732 | goto dynamic_cca_tune; | |
733 | ||
734 | /* | |
735 | * A too low RSSI will cause too much false CCA which will | |
736 | * then corrupt the R17 tuning. To remidy this the tuning should | |
737 | * be stopped (While making sure the R17 value will not exceed limits) | |
738 | */ | |
739 | if (rssi < -80 && rt2x00dev->link.count > 20) { | |
740 | if (r17 >= 0x41) { | |
741 | r17 = rt2x00dev->link.vgc_level; | |
742 | rt2500pci_bbp_write(rt2x00dev, 17, r17); | |
743 | } | |
744 | return; | |
745 | } | |
746 | ||
747 | /* | |
748 | * Special big-R17 for short distance | |
749 | */ | |
750 | if (rssi >= -58) { | |
751 | if (r17 != 0x50) | |
752 | rt2500pci_bbp_write(rt2x00dev, 17, 0x50); | |
753 | return; | |
754 | } | |
755 | ||
756 | /* | |
757 | * Special mid-R17 for middle distance | |
758 | */ | |
759 | if (rssi >= -74) { | |
760 | if (r17 != 0x41) | |
761 | rt2500pci_bbp_write(rt2x00dev, 17, 0x41); | |
762 | return; | |
763 | } | |
764 | ||
765 | /* | |
766 | * Leave short or middle distance condition, restore r17 | |
767 | * to the dynamic tuning range. | |
768 | */ | |
769 | if (r17 >= 0x41) { | |
770 | rt2500pci_bbp_write(rt2x00dev, 17, rt2x00dev->link.vgc_level); | |
771 | return; | |
772 | } | |
773 | ||
774 | dynamic_cca_tune: | |
775 | ||
776 | /* | |
777 | * R17 is inside the dynamic tuning range, | |
778 | * start tuning the link based on the false cca counter. | |
779 | */ | |
780 | if (rt2x00dev->link.false_cca > 512 && r17 < 0x40) { | |
781 | rt2500pci_bbp_write(rt2x00dev, 17, ++r17); | |
782 | rt2x00dev->link.vgc_level = r17; | |
783 | } else if (rt2x00dev->link.false_cca < 100 && r17 > 0x32) { | |
784 | rt2500pci_bbp_write(rt2x00dev, 17, --r17); | |
785 | rt2x00dev->link.vgc_level = r17; | |
786 | } | |
787 | } | |
788 | ||
789 | /* | |
790 | * Initialization functions. | |
791 | */ | |
792 | static void rt2500pci_init_rxring(struct rt2x00_dev *rt2x00dev) | |
793 | { | |
794 | struct data_ring *ring = rt2x00dev->rx; | |
795 | struct data_desc *rxd; | |
796 | unsigned int i; | |
797 | u32 word; | |
798 | ||
799 | memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); | |
800 | ||
801 | for (i = 0; i < ring->stats.limit; i++) { | |
802 | rxd = ring->entry[i].priv; | |
803 | ||
804 | rt2x00_desc_read(rxd, 1, &word); | |
805 | rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, | |
806 | ring->entry[i].data_dma); | |
807 | rt2x00_desc_write(rxd, 1, word); | |
808 | ||
809 | rt2x00_desc_read(rxd, 0, &word); | |
810 | rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); | |
811 | rt2x00_desc_write(rxd, 0, word); | |
812 | } | |
813 | ||
814 | rt2x00_ring_index_clear(rt2x00dev->rx); | |
815 | } | |
816 | ||
817 | static void rt2500pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue) | |
818 | { | |
819 | struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); | |
820 | struct data_desc *txd; | |
821 | unsigned int i; | |
822 | u32 word; | |
823 | ||
824 | memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); | |
825 | ||
826 | for (i = 0; i < ring->stats.limit; i++) { | |
827 | txd = ring->entry[i].priv; | |
828 | ||
829 | rt2x00_desc_read(txd, 1, &word); | |
830 | rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, | |
831 | ring->entry[i].data_dma); | |
832 | rt2x00_desc_write(txd, 1, word); | |
833 | ||
834 | rt2x00_desc_read(txd, 0, &word); | |
835 | rt2x00_set_field32(&word, TXD_W0_VALID, 0); | |
836 | rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); | |
837 | rt2x00_desc_write(txd, 0, word); | |
838 | } | |
839 | ||
840 | rt2x00_ring_index_clear(ring); | |
841 | } | |
842 | ||
843 | static int rt2500pci_init_rings(struct rt2x00_dev *rt2x00dev) | |
844 | { | |
845 | u32 reg; | |
846 | ||
847 | /* | |
848 | * Initialize rings. | |
849 | */ | |
850 | rt2500pci_init_rxring(rt2x00dev); | |
851 | rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); | |
852 | rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); | |
853 | rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON); | |
854 | rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); | |
855 | ||
856 | /* | |
857 | * Initialize registers. | |
858 | */ | |
859 | rt2x00pci_register_read(rt2x00dev, TXCSR2, ®); | |
860 | rt2x00_set_field32(®, TXCSR2_TXD_SIZE, | |
861 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size); | |
862 | rt2x00_set_field32(®, TXCSR2_NUM_TXD, | |
863 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit); | |
864 | rt2x00_set_field32(®, TXCSR2_NUM_ATIM, | |
865 | rt2x00dev->bcn[1].stats.limit); | |
866 | rt2x00_set_field32(®, TXCSR2_NUM_PRIO, | |
867 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit); | |
868 | rt2x00pci_register_write(rt2x00dev, TXCSR2, reg); | |
869 | ||
870 | rt2x00pci_register_read(rt2x00dev, TXCSR3, ®); | |
871 | rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, | |
872 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma); | |
873 | rt2x00pci_register_write(rt2x00dev, TXCSR3, reg); | |
874 | ||
875 | rt2x00pci_register_read(rt2x00dev, TXCSR5, ®); | |
876 | rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, | |
877 | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma); | |
878 | rt2x00pci_register_write(rt2x00dev, TXCSR5, reg); | |
879 | ||
880 | rt2x00pci_register_read(rt2x00dev, TXCSR4, ®); | |
881 | rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, | |
882 | rt2x00dev->bcn[1].data_dma); | |
883 | rt2x00pci_register_write(rt2x00dev, TXCSR4, reg); | |
884 | ||
885 | rt2x00pci_register_read(rt2x00dev, TXCSR6, ®); | |
886 | rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, | |
887 | rt2x00dev->bcn[0].data_dma); | |
888 | rt2x00pci_register_write(rt2x00dev, TXCSR6, reg); | |
889 | ||
890 | rt2x00pci_register_read(rt2x00dev, RXCSR1, ®); | |
891 | rt2x00_set_field32(®, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size); | |
892 | rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->stats.limit); | |
893 | rt2x00pci_register_write(rt2x00dev, RXCSR1, reg); | |
894 | ||
895 | rt2x00pci_register_read(rt2x00dev, RXCSR2, ®); | |
896 | rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, | |
897 | rt2x00dev->rx->data_dma); | |
898 | rt2x00pci_register_write(rt2x00dev, RXCSR2, reg); | |
899 | ||
900 | return 0; | |
901 | } | |
902 | ||
903 | static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev) | |
904 | { | |
905 | u32 reg; | |
906 | ||
907 | rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002); | |
908 | rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002); | |
909 | rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00020002); | |
910 | rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002); | |
911 | ||
912 | rt2x00pci_register_read(rt2x00dev, TIMECSR, ®); | |
913 | rt2x00_set_field32(®, TIMECSR_US_COUNT, 33); | |
914 | rt2x00_set_field32(®, TIMECSR_US_64_COUNT, 63); | |
915 | rt2x00_set_field32(®, TIMECSR_BEACON_EXPECT, 0); | |
916 | rt2x00pci_register_write(rt2x00dev, TIMECSR, reg); | |
917 | ||
918 | rt2x00pci_register_read(rt2x00dev, CSR9, ®); | |
919 | rt2x00_set_field32(®, CSR9_MAX_FRAME_UNIT, | |
920 | rt2x00dev->rx->data_size / 128); | |
921 | rt2x00pci_register_write(rt2x00dev, CSR9, reg); | |
922 | ||
923 | /* | |
924 | * Always use CWmin and CWmax set in descriptor. | |
925 | */ | |
926 | rt2x00pci_register_read(rt2x00dev, CSR11, ®); | |
927 | rt2x00_set_field32(®, CSR11_CW_SELECT, 0); | |
928 | rt2x00pci_register_write(rt2x00dev, CSR11, reg); | |
929 | ||
930 | rt2x00pci_register_write(rt2x00dev, CNT3, 0); | |
931 | ||
932 | rt2x00pci_register_read(rt2x00dev, TXCSR8, ®); | |
933 | rt2x00_set_field32(®, TXCSR8_BBP_ID0, 10); | |
934 | rt2x00_set_field32(®, TXCSR8_BBP_ID0_VALID, 1); | |
935 | rt2x00_set_field32(®, TXCSR8_BBP_ID1, 11); | |
936 | rt2x00_set_field32(®, TXCSR8_BBP_ID1_VALID, 1); | |
937 | rt2x00_set_field32(®, TXCSR8_BBP_ID2, 13); | |
938 | rt2x00_set_field32(®, TXCSR8_BBP_ID2_VALID, 1); | |
939 | rt2x00_set_field32(®, TXCSR8_BBP_ID3, 12); | |
940 | rt2x00_set_field32(®, TXCSR8_BBP_ID3_VALID, 1); | |
941 | rt2x00pci_register_write(rt2x00dev, TXCSR8, reg); | |
942 | ||
943 | rt2x00pci_register_read(rt2x00dev, ARTCSR0, ®); | |
944 | rt2x00_set_field32(®, ARTCSR0_ACK_CTS_1MBS, 112); | |
945 | rt2x00_set_field32(®, ARTCSR0_ACK_CTS_2MBS, 56); | |
946 | rt2x00_set_field32(®, ARTCSR0_ACK_CTS_5_5MBS, 20); | |
947 | rt2x00_set_field32(®, ARTCSR0_ACK_CTS_11MBS, 10); | |
948 | rt2x00pci_register_write(rt2x00dev, ARTCSR0, reg); | |
949 | ||
950 | rt2x00pci_register_read(rt2x00dev, ARTCSR1, ®); | |
951 | rt2x00_set_field32(®, ARTCSR1_ACK_CTS_6MBS, 45); | |
952 | rt2x00_set_field32(®, ARTCSR1_ACK_CTS_9MBS, 37); | |
953 | rt2x00_set_field32(®, ARTCSR1_ACK_CTS_12MBS, 33); | |
954 | rt2x00_set_field32(®, ARTCSR1_ACK_CTS_18MBS, 29); | |
955 | rt2x00pci_register_write(rt2x00dev, ARTCSR1, reg); | |
956 | ||
957 | rt2x00pci_register_read(rt2x00dev, ARTCSR2, ®); | |
958 | rt2x00_set_field32(®, ARTCSR2_ACK_CTS_24MBS, 29); | |
959 | rt2x00_set_field32(®, ARTCSR2_ACK_CTS_36MBS, 25); | |
960 | rt2x00_set_field32(®, ARTCSR2_ACK_CTS_48MBS, 25); | |
961 | rt2x00_set_field32(®, ARTCSR2_ACK_CTS_54MBS, 25); | |
962 | rt2x00pci_register_write(rt2x00dev, ARTCSR2, reg); | |
963 | ||
964 | rt2x00pci_register_read(rt2x00dev, RXCSR3, ®); | |
965 | rt2x00_set_field32(®, RXCSR3_BBP_ID0, 47); /* CCK Signal */ | |
966 | rt2x00_set_field32(®, RXCSR3_BBP_ID0_VALID, 1); | |
967 | rt2x00_set_field32(®, RXCSR3_BBP_ID1, 51); /* Rssi */ | |
968 | rt2x00_set_field32(®, RXCSR3_BBP_ID1_VALID, 1); | |
969 | rt2x00_set_field32(®, RXCSR3_BBP_ID2, 42); /* OFDM Rate */ | |
970 | rt2x00_set_field32(®, RXCSR3_BBP_ID2_VALID, 1); | |
971 | rt2x00_set_field32(®, RXCSR3_BBP_ID3, 51); /* RSSI */ | |
972 | rt2x00_set_field32(®, RXCSR3_BBP_ID3_VALID, 1); | |
973 | rt2x00pci_register_write(rt2x00dev, RXCSR3, reg); | |
974 | ||
975 | rt2x00pci_register_read(rt2x00dev, PCICSR, ®); | |
976 | rt2x00_set_field32(®, PCICSR_BIG_ENDIAN, 0); | |
977 | rt2x00_set_field32(®, PCICSR_RX_TRESHOLD, 0); | |
978 | rt2x00_set_field32(®, PCICSR_TX_TRESHOLD, 3); | |
979 | rt2x00_set_field32(®, PCICSR_BURST_LENTH, 1); | |
980 | rt2x00_set_field32(®, PCICSR_ENABLE_CLK, 1); | |
981 | rt2x00_set_field32(®, PCICSR_READ_MULTIPLE, 1); | |
982 | rt2x00_set_field32(®, PCICSR_WRITE_INVALID, 1); | |
983 | rt2x00pci_register_write(rt2x00dev, PCICSR, reg); | |
984 | ||
985 | rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100); | |
986 | ||
987 | rt2x00pci_register_write(rt2x00dev, GPIOCSR, 0x0000ff00); | |
988 | rt2x00pci_register_write(rt2x00dev, TESTCSR, 0x000000f0); | |
989 | ||
990 | if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) | |
991 | return -EBUSY; | |
992 | ||
993 | rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00213223); | |
994 | rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518); | |
995 | ||
996 | rt2x00pci_register_read(rt2x00dev, MACCSR2, ®); | |
997 | rt2x00_set_field32(®, MACCSR2_DELAY, 64); | |
998 | rt2x00pci_register_write(rt2x00dev, MACCSR2, reg); | |
999 | ||
1000 | rt2x00pci_register_read(rt2x00dev, RALINKCSR, ®); | |
1001 | rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA0, 17); | |
1002 | rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID0, 26); | |
1003 | rt2x00_set_field32(®, RALINKCSR_AR_BBP_VALID0, 1); | |
1004 | rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA1, 0); | |
1005 | rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID1, 26); | |
1006 | rt2x00_set_field32(®, RALINKCSR_AR_BBP_VALID1, 1); | |
1007 | rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg); | |
1008 | ||
1009 | rt2x00pci_register_write(rt2x00dev, BBPCSR1, 0x82188200); | |
1010 | ||
1011 | rt2x00pci_register_write(rt2x00dev, TXACKCSR0, 0x00000020); | |
1012 | ||
1013 | rt2x00pci_register_read(rt2x00dev, CSR1, ®); | |
1014 | rt2x00_set_field32(®, CSR1_SOFT_RESET, 1); | |
1015 | rt2x00_set_field32(®, CSR1_BBP_RESET, 0); | |
1016 | rt2x00_set_field32(®, CSR1_HOST_READY, 0); | |
1017 | rt2x00pci_register_write(rt2x00dev, CSR1, reg); | |
1018 | ||
1019 | rt2x00pci_register_read(rt2x00dev, CSR1, ®); | |
1020 | rt2x00_set_field32(®, CSR1_SOFT_RESET, 0); | |
1021 | rt2x00_set_field32(®, CSR1_HOST_READY, 1); | |
1022 | rt2x00pci_register_write(rt2x00dev, CSR1, reg); | |
1023 | ||
1024 | /* | |
1025 | * We must clear the FCS and FIFO error count. | |
1026 | * These registers are cleared on read, | |
1027 | * so we may pass a useless variable to store the value. | |
1028 | */ | |
1029 | rt2x00pci_register_read(rt2x00dev, CNT0, ®); | |
1030 | rt2x00pci_register_read(rt2x00dev, CNT4, ®); | |
1031 | ||
1032 | return 0; | |
1033 | } | |
1034 | ||
1035 | static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev) | |
1036 | { | |
1037 | unsigned int i; | |
1038 | u16 eeprom; | |
1039 | u8 reg_id; | |
1040 | u8 value; | |
1041 | ||
1042 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | |
1043 | rt2500pci_bbp_read(rt2x00dev, 0, &value); | |
1044 | if ((value != 0xff) && (value != 0x00)) | |
1045 | goto continue_csr_init; | |
1046 | NOTICE(rt2x00dev, "Waiting for BBP register.\n"); | |
1047 | udelay(REGISTER_BUSY_DELAY); | |
1048 | } | |
1049 | ||
1050 | ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); | |
1051 | return -EACCES; | |
1052 | ||
1053 | continue_csr_init: | |
1054 | rt2500pci_bbp_write(rt2x00dev, 3, 0x02); | |
1055 | rt2500pci_bbp_write(rt2x00dev, 4, 0x19); | |
1056 | rt2500pci_bbp_write(rt2x00dev, 14, 0x1c); | |
1057 | rt2500pci_bbp_write(rt2x00dev, 15, 0x30); | |
1058 | rt2500pci_bbp_write(rt2x00dev, 16, 0xac); | |
1059 | rt2500pci_bbp_write(rt2x00dev, 18, 0x18); | |
1060 | rt2500pci_bbp_write(rt2x00dev, 19, 0xff); | |
1061 | rt2500pci_bbp_write(rt2x00dev, 20, 0x1e); | |
1062 | rt2500pci_bbp_write(rt2x00dev, 21, 0x08); | |
1063 | rt2500pci_bbp_write(rt2x00dev, 22, 0x08); | |
1064 | rt2500pci_bbp_write(rt2x00dev, 23, 0x08); | |
1065 | rt2500pci_bbp_write(rt2x00dev, 24, 0x70); | |
1066 | rt2500pci_bbp_write(rt2x00dev, 25, 0x40); | |
1067 | rt2500pci_bbp_write(rt2x00dev, 26, 0x08); | |
1068 | rt2500pci_bbp_write(rt2x00dev, 27, 0x23); | |
1069 | rt2500pci_bbp_write(rt2x00dev, 30, 0x10); | |
1070 | rt2500pci_bbp_write(rt2x00dev, 31, 0x2b); | |
1071 | rt2500pci_bbp_write(rt2x00dev, 32, 0xb9); | |
1072 | rt2500pci_bbp_write(rt2x00dev, 34, 0x12); | |
1073 | rt2500pci_bbp_write(rt2x00dev, 35, 0x50); | |
1074 | rt2500pci_bbp_write(rt2x00dev, 39, 0xc4); | |
1075 | rt2500pci_bbp_write(rt2x00dev, 40, 0x02); | |
1076 | rt2500pci_bbp_write(rt2x00dev, 41, 0x60); | |
1077 | rt2500pci_bbp_write(rt2x00dev, 53, 0x10); | |
1078 | rt2500pci_bbp_write(rt2x00dev, 54, 0x18); | |
1079 | rt2500pci_bbp_write(rt2x00dev, 56, 0x08); | |
1080 | rt2500pci_bbp_write(rt2x00dev, 57, 0x10); | |
1081 | rt2500pci_bbp_write(rt2x00dev, 58, 0x08); | |
1082 | rt2500pci_bbp_write(rt2x00dev, 61, 0x6d); | |
1083 | rt2500pci_bbp_write(rt2x00dev, 62, 0x10); | |
1084 | ||
1085 | DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); | |
1086 | for (i = 0; i < EEPROM_BBP_SIZE; i++) { | |
1087 | rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); | |
1088 | ||
1089 | if (eeprom != 0xffff && eeprom != 0x0000) { | |
1090 | reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); | |
1091 | value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); | |
1092 | DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", | |
1093 | reg_id, value); | |
1094 | rt2500pci_bbp_write(rt2x00dev, reg_id, value); | |
1095 | } | |
1096 | } | |
1097 | DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); | |
1098 | ||
1099 | return 0; | |
1100 | } | |
1101 | ||
1102 | /* | |
1103 | * Device state switch handlers. | |
1104 | */ | |
1105 | static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev, | |
1106 | enum dev_state state) | |
1107 | { | |
1108 | u32 reg; | |
1109 | ||
1110 | rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); | |
1111 | rt2x00_set_field32(®, RXCSR0_DISABLE_RX, | |
1112 | state == STATE_RADIO_RX_OFF); | |
1113 | rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); | |
1114 | } | |
1115 | ||
1116 | static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev, | |
1117 | enum dev_state state) | |
1118 | { | |
1119 | int mask = (state == STATE_RADIO_IRQ_OFF); | |
1120 | u32 reg; | |
1121 | ||
1122 | /* | |
1123 | * When interrupts are being enabled, the interrupt registers | |
1124 | * should clear the register to assure a clean state. | |
1125 | */ | |
1126 | if (state == STATE_RADIO_IRQ_ON) { | |
1127 | rt2x00pci_register_read(rt2x00dev, CSR7, ®); | |
1128 | rt2x00pci_register_write(rt2x00dev, CSR7, reg); | |
1129 | } | |
1130 | ||
1131 | /* | |
1132 | * Only toggle the interrupts bits we are going to use. | |
1133 | * Non-checked interrupt bits are disabled by default. | |
1134 | */ | |
1135 | rt2x00pci_register_read(rt2x00dev, CSR8, ®); | |
1136 | rt2x00_set_field32(®, CSR8_TBCN_EXPIRE, mask); | |
1137 | rt2x00_set_field32(®, CSR8_TXDONE_TXRING, mask); | |
1138 | rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, mask); | |
1139 | rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, mask); | |
1140 | rt2x00_set_field32(®, CSR8_RXDONE, mask); | |
1141 | rt2x00pci_register_write(rt2x00dev, CSR8, reg); | |
1142 | } | |
1143 | ||
1144 | static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev) | |
1145 | { | |
1146 | /* | |
1147 | * Initialize all registers. | |
1148 | */ | |
1149 | if (rt2500pci_init_rings(rt2x00dev) || | |
1150 | rt2500pci_init_registers(rt2x00dev) || | |
1151 | rt2500pci_init_bbp(rt2x00dev)) { | |
1152 | ERROR(rt2x00dev, "Register initialization failed.\n"); | |
1153 | return -EIO; | |
1154 | } | |
1155 | ||
1156 | /* | |
1157 | * Enable interrupts. | |
1158 | */ | |
1159 | rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); | |
1160 | ||
1161 | /* | |
1162 | * Enable LED | |
1163 | */ | |
1164 | rt2500pci_enable_led(rt2x00dev); | |
1165 | ||
1166 | return 0; | |
1167 | } | |
1168 | ||
1169 | static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev) | |
1170 | { | |
1171 | u32 reg; | |
1172 | ||
1173 | /* | |
1174 | * Disable LED | |
1175 | */ | |
1176 | rt2500pci_disable_led(rt2x00dev); | |
1177 | ||
1178 | rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0); | |
1179 | ||
1180 | /* | |
1181 | * Disable synchronisation. | |
1182 | */ | |
1183 | rt2x00pci_register_write(rt2x00dev, CSR14, 0); | |
1184 | ||
1185 | /* | |
1186 | * Cancel RX and TX. | |
1187 | */ | |
1188 | rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); | |
1189 | rt2x00_set_field32(®, TXCSR0_ABORT, 1); | |
1190 | rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); | |
1191 | ||
1192 | /* | |
1193 | * Disable interrupts. | |
1194 | */ | |
1195 | rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF); | |
1196 | } | |
1197 | ||
1198 | static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev, | |
1199 | enum dev_state state) | |
1200 | { | |
1201 | u32 reg; | |
1202 | unsigned int i; | |
1203 | char put_to_sleep; | |
1204 | char bbp_state; | |
1205 | char rf_state; | |
1206 | ||
1207 | put_to_sleep = (state != STATE_AWAKE); | |
1208 | ||
1209 | rt2x00pci_register_read(rt2x00dev, PWRCSR1, ®); | |
1210 | rt2x00_set_field32(®, PWRCSR1_SET_STATE, 1); | |
1211 | rt2x00_set_field32(®, PWRCSR1_BBP_DESIRE_STATE, state); | |
1212 | rt2x00_set_field32(®, PWRCSR1_RF_DESIRE_STATE, state); | |
1213 | rt2x00_set_field32(®, PWRCSR1_PUT_TO_SLEEP, put_to_sleep); | |
1214 | rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg); | |
1215 | ||
1216 | /* | |
1217 | * Device is not guaranteed to be in the requested state yet. | |
1218 | * We must wait until the register indicates that the | |
1219 | * device has entered the correct state. | |
1220 | */ | |
1221 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | |
1222 | rt2x00pci_register_read(rt2x00dev, PWRCSR1, ®); | |
1223 | bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE); | |
1224 | rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE); | |
1225 | if (bbp_state == state && rf_state == state) | |
1226 | return 0; | |
1227 | msleep(10); | |
1228 | } | |
1229 | ||
1230 | NOTICE(rt2x00dev, "Device failed to enter state %d, " | |
1231 | "current device state: bbp %d and rf %d.\n", | |
1232 | state, bbp_state, rf_state); | |
1233 | ||
1234 | return -EBUSY; | |
1235 | } | |
1236 | ||
1237 | static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev, | |
1238 | enum dev_state state) | |
1239 | { | |
1240 | int retval = 0; | |
1241 | ||
1242 | switch (state) { | |
1243 | case STATE_RADIO_ON: | |
1244 | retval = rt2500pci_enable_radio(rt2x00dev); | |
1245 | break; | |
1246 | case STATE_RADIO_OFF: | |
1247 | rt2500pci_disable_radio(rt2x00dev); | |
1248 | break; | |
1249 | case STATE_RADIO_RX_ON: | |
1250 | case STATE_RADIO_RX_OFF: | |
1251 | rt2500pci_toggle_rx(rt2x00dev, state); | |
1252 | break; | |
1253 | case STATE_DEEP_SLEEP: | |
1254 | case STATE_SLEEP: | |
1255 | case STATE_STANDBY: | |
1256 | case STATE_AWAKE: | |
1257 | retval = rt2500pci_set_state(rt2x00dev, state); | |
1258 | break; | |
1259 | default: | |
1260 | retval = -ENOTSUPP; | |
1261 | break; | |
1262 | } | |
1263 | ||
1264 | return retval; | |
1265 | } | |
1266 | ||
1267 | /* | |
1268 | * TX descriptor initialization | |
1269 | */ | |
1270 | static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, | |
1271 | struct data_desc *txd, | |
1272 | struct data_entry_desc *desc, | |
1273 | struct ieee80211_hdr *ieee80211hdr, | |
1274 | unsigned int length, | |
1275 | struct ieee80211_tx_control *control) | |
1276 | { | |
1277 | u32 word; | |
1278 | ||
1279 | /* | |
1280 | * Start writing the descriptor words. | |
1281 | */ | |
1282 | rt2x00_desc_read(txd, 2, &word); | |
1283 | rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER); | |
1284 | rt2x00_set_field32(&word, TXD_W2_AIFS, desc->aifs); | |
1285 | rt2x00_set_field32(&word, TXD_W2_CWMIN, desc->cw_min); | |
1286 | rt2x00_set_field32(&word, TXD_W2_CWMAX, desc->cw_max); | |
1287 | rt2x00_desc_write(txd, 2, word); | |
1288 | ||
1289 | rt2x00_desc_read(txd, 3, &word); | |
1290 | rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, desc->signal); | |
1291 | rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, desc->service); | |
1292 | rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, desc->length_low); | |
1293 | rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, desc->length_high); | |
1294 | rt2x00_desc_write(txd, 3, word); | |
1295 | ||
1296 | rt2x00_desc_read(txd, 10, &word); | |
1297 | rt2x00_set_field32(&word, TXD_W10_RTS, | |
1298 | test_bit(ENTRY_TXD_RTS_FRAME, &desc->flags)); | |
1299 | rt2x00_desc_write(txd, 10, word); | |
1300 | ||
1301 | rt2x00_desc_read(txd, 0, &word); | |
1302 | rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); | |
1303 | rt2x00_set_field32(&word, TXD_W0_VALID, 1); | |
1304 | rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, | |
1305 | test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); | |
1306 | rt2x00_set_field32(&word, TXD_W0_ACK, | |
1307 | !(control->flags & IEEE80211_TXCTL_NO_ACK)); | |
1308 | rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, | |
1309 | test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); | |
1310 | rt2x00_set_field32(&word, TXD_W0_OFDM, | |
1311 | test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); | |
1312 | rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1); | |
1313 | rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); | |
1314 | rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, | |
1315 | !!(control->flags & | |
1316 | IEEE80211_TXCTL_LONG_RETRY_LIMIT)); | |
1317 | rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length); | |
1318 | rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); | |
1319 | rt2x00_desc_write(txd, 0, word); | |
1320 | } | |
1321 | ||
1322 | /* | |
1323 | * TX data initialization | |
1324 | */ | |
1325 | static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, | |
1326 | unsigned int queue) | |
1327 | { | |
1328 | u32 reg; | |
1329 | ||
1330 | if (queue == IEEE80211_TX_QUEUE_BEACON) { | |
1331 | rt2x00pci_register_read(rt2x00dev, CSR14, ®); | |
1332 | if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) { | |
1333 | rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); | |
1334 | rt2x00pci_register_write(rt2x00dev, CSR14, reg); | |
1335 | } | |
1336 | return; | |
1337 | } | |
1338 | ||
1339 | rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); | |
1340 | if (queue == IEEE80211_TX_QUEUE_DATA0) | |
1341 | rt2x00_set_field32(®, TXCSR0_KICK_PRIO, 1); | |
1342 | else if (queue == IEEE80211_TX_QUEUE_DATA1) | |
1343 | rt2x00_set_field32(®, TXCSR0_KICK_TX, 1); | |
1344 | else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON) | |
1345 | rt2x00_set_field32(®, TXCSR0_KICK_ATIM, 1); | |
1346 | rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); | |
1347 | } | |
1348 | ||
1349 | /* | |
1350 | * RX control handlers | |
1351 | */ | |
1352 | static int rt2500pci_fill_rxdone(struct data_entry *entry, | |
1353 | int *signal, int *rssi, int *ofdm, int *size) | |
1354 | { | |
1355 | struct data_desc *rxd = entry->priv; | |
1356 | u32 word0; | |
1357 | u32 word2; | |
1358 | ||
1359 | rt2x00_desc_read(rxd, 0, &word0); | |
1360 | rt2x00_desc_read(rxd, 2, &word2); | |
1361 | ||
1362 | if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) || | |
1363 | rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR) || | |
1364 | rt2x00_get_field32(word0, RXD_W0_ICV_ERROR)) | |
1365 | return -EINVAL; | |
1366 | ||
1367 | *signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); | |
1368 | *rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - | |
1369 | entry->ring->rt2x00dev->rssi_offset; | |
1370 | *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); | |
1371 | *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); | |
1372 | ||
1373 | return 0; | |
1374 | } | |
1375 | ||
1376 | /* | |
1377 | * Interrupt functions. | |
1378 | */ | |
1379 | static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue) | |
1380 | { | |
1381 | struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); | |
1382 | struct data_entry *entry; | |
1383 | struct data_desc *txd; | |
1384 | u32 word; | |
1385 | int tx_status; | |
1386 | int retry; | |
1387 | ||
1388 | while (!rt2x00_ring_empty(ring)) { | |
1389 | entry = rt2x00_get_data_entry_done(ring); | |
1390 | txd = entry->priv; | |
1391 | rt2x00_desc_read(txd, 0, &word); | |
1392 | ||
1393 | if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || | |
1394 | !rt2x00_get_field32(word, TXD_W0_VALID)) | |
1395 | break; | |
1396 | ||
1397 | /* | |
1398 | * Obtain the status about this packet. | |
1399 | */ | |
1400 | tx_status = rt2x00_get_field32(word, TXD_W0_RESULT); | |
1401 | retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); | |
1402 | ||
1403 | rt2x00lib_txdone(entry, tx_status, retry); | |
1404 | ||
1405 | /* | |
1406 | * Make this entry available for reuse. | |
1407 | */ | |
1408 | entry->flags = 0; | |
1409 | rt2x00_set_field32(&word, TXD_W0_VALID, 0); | |
1410 | rt2x00_desc_write(txd, 0, word); | |
1411 | rt2x00_ring_index_done_inc(ring); | |
1412 | } | |
1413 | ||
1414 | /* | |
1415 | * If the data ring was full before the txdone handler | |
1416 | * we must make sure the packet queue in the mac80211 stack | |
1417 | * is reenabled when the txdone handler has finished. | |
1418 | */ | |
1419 | entry = ring->entry; | |
1420 | if (!rt2x00_ring_full(ring)) | |
1421 | ieee80211_wake_queue(rt2x00dev->hw, | |
1422 | entry->tx_status.control.queue); | |
1423 | } | |
1424 | ||
1425 | static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) | |
1426 | { | |
1427 | struct rt2x00_dev *rt2x00dev = dev_instance; | |
1428 | u32 reg; | |
1429 | ||
1430 | /* | |
1431 | * Get the interrupt sources & saved to local variable. | |
1432 | * Write register value back to clear pending interrupts. | |
1433 | */ | |
1434 | rt2x00pci_register_read(rt2x00dev, CSR7, ®); | |
1435 | rt2x00pci_register_write(rt2x00dev, CSR7, reg); | |
1436 | ||
1437 | if (!reg) | |
1438 | return IRQ_NONE; | |
1439 | ||
1440 | if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) | |
1441 | return IRQ_HANDLED; | |
1442 | ||
1443 | /* | |
1444 | * Handle interrupts, walk through all bits | |
1445 | * and run the tasks, the bits are checked in order of | |
1446 | * priority. | |
1447 | */ | |
1448 | ||
1449 | /* | |
1450 | * 1 - Beacon timer expired interrupt. | |
1451 | */ | |
1452 | if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE)) | |
1453 | rt2x00lib_beacondone(rt2x00dev); | |
1454 | ||
1455 | /* | |
1456 | * 2 - Rx ring done interrupt. | |
1457 | */ | |
1458 | if (rt2x00_get_field32(reg, CSR7_RXDONE)) | |
1459 | rt2x00pci_rxdone(rt2x00dev); | |
1460 | ||
1461 | /* | |
1462 | * 3 - Atim ring transmit done interrupt. | |
1463 | */ | |
1464 | if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING)) | |
1465 | rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON); | |
1466 | ||
1467 | /* | |
1468 | * 4 - Priority ring transmit done interrupt. | |
1469 | */ | |
1470 | if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING)) | |
1471 | rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); | |
1472 | ||
1473 | /* | |
1474 | * 5 - Tx ring transmit done interrupt. | |
1475 | */ | |
1476 | if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) | |
1477 | rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); | |
1478 | ||
1479 | return IRQ_HANDLED; | |
1480 | } | |
1481 | ||
1482 | /* | |
1483 | * Device probe functions. | |
1484 | */ | |
1485 | static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) | |
1486 | { | |
1487 | struct eeprom_93cx6 eeprom; | |
1488 | u32 reg; | |
1489 | u16 word; | |
1490 | u8 *mac; | |
1491 | ||
1492 | rt2x00pci_register_read(rt2x00dev, CSR21, ®); | |
1493 | ||
1494 | eeprom.data = rt2x00dev; | |
1495 | eeprom.register_read = rt2500pci_eepromregister_read; | |
1496 | eeprom.register_write = rt2500pci_eepromregister_write; | |
1497 | eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ? | |
1498 | PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; | |
1499 | eeprom.reg_data_in = 0; | |
1500 | eeprom.reg_data_out = 0; | |
1501 | eeprom.reg_data_clock = 0; | |
1502 | eeprom.reg_chip_select = 0; | |
1503 | ||
1504 | eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, | |
1505 | EEPROM_SIZE / sizeof(u16)); | |
1506 | ||
1507 | /* | |
1508 | * Start validation of the data that has been read. | |
1509 | */ | |
1510 | mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); | |
1511 | if (!is_valid_ether_addr(mac)) { | |
0795af57 JP |
1512 | DECLARE_MAC_BUF(macbuf); |
1513 | ||
95ea3627 | 1514 | random_ether_addr(mac); |
0795af57 JP |
1515 | EEPROM(rt2x00dev, "MAC: %s\n", |
1516 | print_mac(macbuf, mac)); | |
95ea3627 ID |
1517 | } |
1518 | ||
1519 | rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); | |
1520 | if (word == 0xffff) { | |
1521 | rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); | |
1522 | rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 0); | |
1523 | rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 0); | |
1524 | rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, 0); | |
1525 | rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); | |
1526 | rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); | |
1527 | rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522); | |
1528 | rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); | |
1529 | EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); | |
1530 | } | |
1531 | ||
1532 | rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); | |
1533 | if (word == 0xffff) { | |
1534 | rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); | |
1535 | rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0); | |
1536 | rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0); | |
1537 | rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); | |
1538 | EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); | |
1539 | } | |
1540 | ||
1541 | rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word); | |
1542 | if (word == 0xffff) { | |
1543 | rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI, | |
1544 | DEFAULT_RSSI_OFFSET); | |
1545 | rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word); | |
1546 | EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word); | |
1547 | } | |
1548 | ||
1549 | return 0; | |
1550 | } | |
1551 | ||
1552 | static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) | |
1553 | { | |
1554 | u32 reg; | |
1555 | u16 value; | |
1556 | u16 eeprom; | |
1557 | ||
1558 | /* | |
1559 | * Read EEPROM word for configuration. | |
1560 | */ | |
1561 | rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); | |
1562 | ||
1563 | /* | |
1564 | * Identify RF chipset. | |
1565 | */ | |
1566 | value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); | |
1567 | rt2x00pci_register_read(rt2x00dev, CSR0, ®); | |
1568 | rt2x00_set_chip(rt2x00dev, RT2560, value, reg); | |
1569 | ||
1570 | if (!rt2x00_rf(&rt2x00dev->chip, RF2522) && | |
1571 | !rt2x00_rf(&rt2x00dev->chip, RF2523) && | |
1572 | !rt2x00_rf(&rt2x00dev->chip, RF2524) && | |
1573 | !rt2x00_rf(&rt2x00dev->chip, RF2525) && | |
1574 | !rt2x00_rf(&rt2x00dev->chip, RF2525E) && | |
1575 | !rt2x00_rf(&rt2x00dev->chip, RF5222)) { | |
1576 | ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); | |
1577 | return -ENODEV; | |
1578 | } | |
1579 | ||
1580 | /* | |
1581 | * Identify default antenna configuration. | |
1582 | */ | |
1583 | rt2x00dev->hw->conf.antenna_sel_tx = | |
1584 | rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); | |
1585 | rt2x00dev->hw->conf.antenna_sel_rx = | |
1586 | rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); | |
1587 | ||
1588 | /* | |
1589 | * Store led mode, for correct led behaviour. | |
1590 | */ | |
1591 | rt2x00dev->led_mode = | |
1592 | rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); | |
1593 | ||
1594 | /* | |
1595 | * Detect if this device has an hardware controlled radio. | |
1596 | */ | |
1597 | if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) | |
1598 | __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags); | |
1599 | ||
1600 | /* | |
1601 | * Check if the BBP tuning should be enabled. | |
1602 | */ | |
1603 | rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); | |
1604 | ||
1605 | if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE)) | |
1606 | __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); | |
1607 | ||
1608 | /* | |
1609 | * Read the RSSI <-> dBm offset information. | |
1610 | */ | |
1611 | rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom); | |
1612 | rt2x00dev->rssi_offset = | |
1613 | rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI); | |
1614 | ||
1615 | return 0; | |
1616 | } | |
1617 | ||
1618 | /* | |
1619 | * RF value list for RF2522 | |
1620 | * Supports: 2.4 GHz | |
1621 | */ | |
1622 | static const struct rf_channel rf_vals_bg_2522[] = { | |
1623 | { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 }, | |
1624 | { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 }, | |
1625 | { 3, 0x00002050, 0x000c2002, 0x00000101, 0 }, | |
1626 | { 4, 0x00002050, 0x000c2016, 0x00000101, 0 }, | |
1627 | { 5, 0x00002050, 0x000c202a, 0x00000101, 0 }, | |
1628 | { 6, 0x00002050, 0x000c203e, 0x00000101, 0 }, | |
1629 | { 7, 0x00002050, 0x000c2052, 0x00000101, 0 }, | |
1630 | { 8, 0x00002050, 0x000c2066, 0x00000101, 0 }, | |
1631 | { 9, 0x00002050, 0x000c207a, 0x00000101, 0 }, | |
1632 | { 10, 0x00002050, 0x000c208e, 0x00000101, 0 }, | |
1633 | { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 }, | |
1634 | { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 }, | |
1635 | { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 }, | |
1636 | { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 }, | |
1637 | }; | |
1638 | ||
1639 | /* | |
1640 | * RF value list for RF2523 | |
1641 | * Supports: 2.4 GHz | |
1642 | */ | |
1643 | static const struct rf_channel rf_vals_bg_2523[] = { | |
1644 | { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b }, | |
1645 | { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b }, | |
1646 | { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b }, | |
1647 | { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b }, | |
1648 | { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b }, | |
1649 | { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b }, | |
1650 | { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b }, | |
1651 | { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b }, | |
1652 | { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b }, | |
1653 | { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b }, | |
1654 | { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b }, | |
1655 | { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b }, | |
1656 | { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b }, | |
1657 | { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 }, | |
1658 | }; | |
1659 | ||
1660 | /* | |
1661 | * RF value list for RF2524 | |
1662 | * Supports: 2.4 GHz | |
1663 | */ | |
1664 | static const struct rf_channel rf_vals_bg_2524[] = { | |
1665 | { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b }, | |
1666 | { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b }, | |
1667 | { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b }, | |
1668 | { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b }, | |
1669 | { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b }, | |
1670 | { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b }, | |
1671 | { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b }, | |
1672 | { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b }, | |
1673 | { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b }, | |
1674 | { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b }, | |
1675 | { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b }, | |
1676 | { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b }, | |
1677 | { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b }, | |
1678 | { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 }, | |
1679 | }; | |
1680 | ||
1681 | /* | |
1682 | * RF value list for RF2525 | |
1683 | * Supports: 2.4 GHz | |
1684 | */ | |
1685 | static const struct rf_channel rf_vals_bg_2525[] = { | |
1686 | { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b }, | |
1687 | { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b }, | |
1688 | { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b }, | |
1689 | { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b }, | |
1690 | { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b }, | |
1691 | { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b }, | |
1692 | { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b }, | |
1693 | { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b }, | |
1694 | { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b }, | |
1695 | { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b }, | |
1696 | { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b }, | |
1697 | { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b }, | |
1698 | { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b }, | |
1699 | { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 }, | |
1700 | }; | |
1701 | ||
1702 | /* | |
1703 | * RF value list for RF2525e | |
1704 | * Supports: 2.4 GHz | |
1705 | */ | |
1706 | static const struct rf_channel rf_vals_bg_2525e[] = { | |
1707 | { 1, 0x00022020, 0x00081136, 0x00060111, 0x00000a0b }, | |
1708 | { 2, 0x00022020, 0x0008113a, 0x00060111, 0x00000a0b }, | |
1709 | { 3, 0x00022020, 0x0008113e, 0x00060111, 0x00000a0b }, | |
1710 | { 4, 0x00022020, 0x00081182, 0x00060111, 0x00000a0b }, | |
1711 | { 5, 0x00022020, 0x00081186, 0x00060111, 0x00000a0b }, | |
1712 | { 6, 0x00022020, 0x0008118a, 0x00060111, 0x00000a0b }, | |
1713 | { 7, 0x00022020, 0x0008118e, 0x00060111, 0x00000a0b }, | |
1714 | { 8, 0x00022020, 0x00081192, 0x00060111, 0x00000a0b }, | |
1715 | { 9, 0x00022020, 0x00081196, 0x00060111, 0x00000a0b }, | |
1716 | { 10, 0x00022020, 0x0008119a, 0x00060111, 0x00000a0b }, | |
1717 | { 11, 0x00022020, 0x0008119e, 0x00060111, 0x00000a0b }, | |
1718 | { 12, 0x00022020, 0x000811a2, 0x00060111, 0x00000a0b }, | |
1719 | { 13, 0x00022020, 0x000811a6, 0x00060111, 0x00000a0b }, | |
1720 | { 14, 0x00022020, 0x000811ae, 0x00060111, 0x00000a1b }, | |
1721 | }; | |
1722 | ||
1723 | /* | |
1724 | * RF value list for RF5222 | |
1725 | * Supports: 2.4 GHz & 5.2 GHz | |
1726 | */ | |
1727 | static const struct rf_channel rf_vals_5222[] = { | |
1728 | { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b }, | |
1729 | { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b }, | |
1730 | { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b }, | |
1731 | { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b }, | |
1732 | { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b }, | |
1733 | { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b }, | |
1734 | { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b }, | |
1735 | { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b }, | |
1736 | { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b }, | |
1737 | { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b }, | |
1738 | { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b }, | |
1739 | { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b }, | |
1740 | { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b }, | |
1741 | { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b }, | |
1742 | ||
1743 | /* 802.11 UNI / HyperLan 2 */ | |
1744 | { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f }, | |
1745 | { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f }, | |
1746 | { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f }, | |
1747 | { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f }, | |
1748 | { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f }, | |
1749 | { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f }, | |
1750 | { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f }, | |
1751 | { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f }, | |
1752 | ||
1753 | /* 802.11 HyperLan 2 */ | |
1754 | { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f }, | |
1755 | { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f }, | |
1756 | { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f }, | |
1757 | { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f }, | |
1758 | { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f }, | |
1759 | { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f }, | |
1760 | { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f }, | |
1761 | { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f }, | |
1762 | { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f }, | |
1763 | { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f }, | |
1764 | ||
1765 | /* 802.11 UNII */ | |
1766 | { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f }, | |
1767 | { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 }, | |
1768 | { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 }, | |
1769 | { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 }, | |
1770 | { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 }, | |
1771 | }; | |
1772 | ||
1773 | static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) | |
1774 | { | |
1775 | struct hw_mode_spec *spec = &rt2x00dev->spec; | |
1776 | u8 *txpower; | |
1777 | unsigned int i; | |
1778 | ||
1779 | /* | |
1780 | * Initialize all hw fields. | |
1781 | */ | |
1782 | rt2x00dev->hw->flags = | |
1783 | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | | |
1784 | IEEE80211_HW_MONITOR_DURING_OPER | | |
1785 | IEEE80211_HW_NO_PROBE_FILTERING; | |
1786 | rt2x00dev->hw->extra_tx_headroom = 0; | |
1787 | rt2x00dev->hw->max_signal = MAX_SIGNAL; | |
1788 | rt2x00dev->hw->max_rssi = MAX_RX_SSI; | |
1789 | rt2x00dev->hw->queues = 2; | |
1790 | ||
1791 | SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); | |
1792 | SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, | |
1793 | rt2x00_eeprom_addr(rt2x00dev, | |
1794 | EEPROM_MAC_ADDR_0)); | |
1795 | ||
1796 | /* | |
1797 | * Convert tx_power array in eeprom. | |
1798 | */ | |
1799 | txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); | |
1800 | for (i = 0; i < 14; i++) | |
1801 | txpower[i] = TXPOWER_FROM_DEV(txpower[i]); | |
1802 | ||
1803 | /* | |
1804 | * Initialize hw_mode information. | |
1805 | */ | |
1806 | spec->num_modes = 2; | |
1807 | spec->num_rates = 12; | |
1808 | spec->tx_power_a = NULL; | |
1809 | spec->tx_power_bg = txpower; | |
1810 | spec->tx_power_default = DEFAULT_TXPOWER; | |
1811 | ||
1812 | if (rt2x00_rf(&rt2x00dev->chip, RF2522)) { | |
1813 | spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); | |
1814 | spec->channels = rf_vals_bg_2522; | |
1815 | } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) { | |
1816 | spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523); | |
1817 | spec->channels = rf_vals_bg_2523; | |
1818 | } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) { | |
1819 | spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524); | |
1820 | spec->channels = rf_vals_bg_2524; | |
1821 | } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) { | |
1822 | spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525); | |
1823 | spec->channels = rf_vals_bg_2525; | |
1824 | } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) { | |
1825 | spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e); | |
1826 | spec->channels = rf_vals_bg_2525e; | |
1827 | } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) { | |
1828 | spec->num_channels = ARRAY_SIZE(rf_vals_5222); | |
1829 | spec->channels = rf_vals_5222; | |
1830 | spec->num_modes = 3; | |
1831 | } | |
1832 | } | |
1833 | ||
1834 | static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) | |
1835 | { | |
1836 | int retval; | |
1837 | ||
1838 | /* | |
1839 | * Allocate eeprom data. | |
1840 | */ | |
1841 | retval = rt2500pci_validate_eeprom(rt2x00dev); | |
1842 | if (retval) | |
1843 | return retval; | |
1844 | ||
1845 | retval = rt2500pci_init_eeprom(rt2x00dev); | |
1846 | if (retval) | |
1847 | return retval; | |
1848 | ||
1849 | /* | |
1850 | * Initialize hw specifications. | |
1851 | */ | |
1852 | rt2500pci_probe_hw_mode(rt2x00dev); | |
1853 | ||
1854 | /* | |
1855 | * This device requires the beacon ring | |
1856 | */ | |
1857 | __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags); | |
1858 | ||
1859 | /* | |
1860 | * Set the rssi offset. | |
1861 | */ | |
1862 | rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; | |
1863 | ||
1864 | return 0; | |
1865 | } | |
1866 | ||
1867 | /* | |
1868 | * IEEE80211 stack callback functions. | |
1869 | */ | |
1870 | static int rt2500pci_set_retry_limit(struct ieee80211_hw *hw, | |
1871 | u32 short_retry, u32 long_retry) | |
1872 | { | |
1873 | struct rt2x00_dev *rt2x00dev = hw->priv; | |
1874 | u32 reg; | |
1875 | ||
1876 | rt2x00pci_register_read(rt2x00dev, CSR11, ®); | |
1877 | rt2x00_set_field32(®, CSR11_LONG_RETRY, long_retry); | |
1878 | rt2x00_set_field32(®, CSR11_SHORT_RETRY, short_retry); | |
1879 | rt2x00pci_register_write(rt2x00dev, CSR11, reg); | |
1880 | ||
1881 | return 0; | |
1882 | } | |
1883 | ||
1884 | static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw) | |
1885 | { | |
1886 | struct rt2x00_dev *rt2x00dev = hw->priv; | |
1887 | u64 tsf; | |
1888 | u32 reg; | |
1889 | ||
1890 | rt2x00pci_register_read(rt2x00dev, CSR17, ®); | |
1891 | tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32; | |
1892 | rt2x00pci_register_read(rt2x00dev, CSR16, ®); | |
1893 | tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER); | |
1894 | ||
1895 | return tsf; | |
1896 | } | |
1897 | ||
1898 | static void rt2500pci_reset_tsf(struct ieee80211_hw *hw) | |
1899 | { | |
1900 | struct rt2x00_dev *rt2x00dev = hw->priv; | |
1901 | ||
1902 | rt2x00pci_register_write(rt2x00dev, CSR16, 0); | |
1903 | rt2x00pci_register_write(rt2x00dev, CSR17, 0); | |
1904 | } | |
1905 | ||
1906 | static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw) | |
1907 | { | |
1908 | struct rt2x00_dev *rt2x00dev = hw->priv; | |
1909 | u32 reg; | |
1910 | ||
1911 | rt2x00pci_register_read(rt2x00dev, CSR15, ®); | |
1912 | return rt2x00_get_field32(reg, CSR15_BEACON_SENT); | |
1913 | } | |
1914 | ||
1915 | static const struct ieee80211_ops rt2500pci_mac80211_ops = { | |
1916 | .tx = rt2x00mac_tx, | |
1917 | .add_interface = rt2x00mac_add_interface, | |
1918 | .remove_interface = rt2x00mac_remove_interface, | |
1919 | .config = rt2x00mac_config, | |
1920 | .config_interface = rt2x00mac_config_interface, | |
1921 | .set_multicast_list = rt2x00mac_set_multicast_list, | |
1922 | .get_stats = rt2x00mac_get_stats, | |
1923 | .set_retry_limit = rt2500pci_set_retry_limit, | |
1924 | .conf_tx = rt2x00mac_conf_tx, | |
1925 | .get_tx_stats = rt2x00mac_get_tx_stats, | |
1926 | .get_tsf = rt2500pci_get_tsf, | |
1927 | .reset_tsf = rt2500pci_reset_tsf, | |
1928 | .beacon_update = rt2x00pci_beacon_update, | |
1929 | .tx_last_beacon = rt2500pci_tx_last_beacon, | |
1930 | }; | |
1931 | ||
1932 | static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = { | |
1933 | .irq_handler = rt2500pci_interrupt, | |
1934 | .probe_hw = rt2500pci_probe_hw, | |
1935 | .initialize = rt2x00pci_initialize, | |
1936 | .uninitialize = rt2x00pci_uninitialize, | |
1937 | .set_device_state = rt2500pci_set_device_state, | |
1938 | #ifdef CONFIG_RT2500PCI_RFKILL | |
1939 | .rfkill_poll = rt2500pci_rfkill_poll, | |
1940 | #endif /* CONFIG_RT2500PCI_RFKILL */ | |
1941 | .link_stats = rt2500pci_link_stats, | |
1942 | .reset_tuner = rt2500pci_reset_tuner, | |
1943 | .link_tuner = rt2500pci_link_tuner, | |
1944 | .write_tx_desc = rt2500pci_write_tx_desc, | |
1945 | .write_tx_data = rt2x00pci_write_tx_data, | |
1946 | .kick_tx_queue = rt2500pci_kick_tx_queue, | |
1947 | .fill_rxdone = rt2500pci_fill_rxdone, | |
1948 | .config_mac_addr = rt2500pci_config_mac_addr, | |
1949 | .config_bssid = rt2500pci_config_bssid, | |
1950 | .config_packet_filter = rt2500pci_config_packet_filter, | |
1951 | .config_type = rt2500pci_config_type, | |
1952 | .config = rt2500pci_config, | |
1953 | }; | |
1954 | ||
1955 | static const struct rt2x00_ops rt2500pci_ops = { | |
1956 | .name = DRV_NAME, | |
1957 | .rxd_size = RXD_DESC_SIZE, | |
1958 | .txd_size = TXD_DESC_SIZE, | |
1959 | .eeprom_size = EEPROM_SIZE, | |
1960 | .rf_size = RF_SIZE, | |
1961 | .lib = &rt2500pci_rt2x00_ops, | |
1962 | .hw = &rt2500pci_mac80211_ops, | |
1963 | #ifdef CONFIG_RT2X00_LIB_DEBUGFS | |
1964 | .debugfs = &rt2500pci_rt2x00debug, | |
1965 | #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ | |
1966 | }; | |
1967 | ||
1968 | /* | |
1969 | * RT2500pci module information. | |
1970 | */ | |
1971 | static struct pci_device_id rt2500pci_device_table[] = { | |
1972 | { PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) }, | |
1973 | { 0, } | |
1974 | }; | |
1975 | ||
1976 | MODULE_AUTHOR(DRV_PROJECT); | |
1977 | MODULE_VERSION(DRV_VERSION); | |
1978 | MODULE_DESCRIPTION("Ralink RT2500 PCI & PCMCIA Wireless LAN driver."); | |
1979 | MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards"); | |
1980 | MODULE_DEVICE_TABLE(pci, rt2500pci_device_table); | |
1981 | MODULE_LICENSE("GPL"); | |
1982 | ||
1983 | static struct pci_driver rt2500pci_driver = { | |
1984 | .name = DRV_NAME, | |
1985 | .id_table = rt2500pci_device_table, | |
1986 | .probe = rt2x00pci_probe, | |
1987 | .remove = __devexit_p(rt2x00pci_remove), | |
1988 | .suspend = rt2x00pci_suspend, | |
1989 | .resume = rt2x00pci_resume, | |
1990 | }; | |
1991 | ||
1992 | static int __init rt2500pci_init(void) | |
1993 | { | |
1994 | return pci_register_driver(&rt2500pci_driver); | |
1995 | } | |
1996 | ||
1997 | static void __exit rt2500pci_exit(void) | |
1998 | { | |
1999 | pci_unregister_driver(&rt2500pci_driver); | |
2000 | } | |
2001 | ||
2002 | module_init(rt2500pci_init); | |
2003 | module_exit(rt2500pci_exit); |