Commit | Line | Data |
---|---|---|
95ea3627 | 1 | /* |
9c9a0d14 | 2 | Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> |
95ea3627 ID |
3 | <http://rt2x00.serialmonkey.com> |
4 | ||
5 | This program is free software; you can redistribute it and/or modify | |
6 | it under the terms of the GNU General Public License as published by | |
7 | the Free Software Foundation; either version 2 of the License, or | |
8 | (at your option) any later version. | |
9 | ||
10 | This program is distributed in the hope that it will be useful, | |
11 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 | GNU General Public License for more details. | |
14 | ||
15 | You should have received a copy of the GNU General Public License | |
16 | along with this program; if not, write to the | |
17 | Free Software Foundation, Inc., | |
18 | 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
19 | */ | |
20 | ||
21 | /* | |
22 | Module: rt61pci | |
23 | Abstract: rt61pci device specific routines. | |
24 | Supported chipsets: RT2561, RT2561s, RT2661. | |
25 | */ | |
26 | ||
a7f3a06c | 27 | #include <linux/crc-itu-t.h> |
95ea3627 ID |
28 | #include <linux/delay.h> |
29 | #include <linux/etherdevice.h> | |
30 | #include <linux/init.h> | |
31 | #include <linux/kernel.h> | |
32 | #include <linux/module.h> | |
33 | #include <linux/pci.h> | |
34 | #include <linux/eeprom_93cx6.h> | |
35 | ||
36 | #include "rt2x00.h" | |
37 | #include "rt2x00pci.h" | |
38 | #include "rt61pci.h" | |
39 | ||
008c4482 ID |
40 | /* |
41 | * Allow hardware encryption to be disabled. | |
42 | */ | |
43 | static int modparam_nohwcrypt = 0; | |
44 | module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); | |
45 | MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); | |
46 | ||
95ea3627 ID |
47 | /* |
48 | * Register access. | |
49 | * BBP and RF register require indirect register access, | |
50 | * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this. | |
51 | * These indirect registers work with busy bits, | |
52 | * and we will try maximal REGISTER_BUSY_COUNT times to access | |
53 | * the register while taking a REGISTER_BUSY_DELAY us delay | |
b34e620f | 54 | * between each attempt. When the busy bit is still set at that time, |
95ea3627 ID |
55 | * the access attempt is considered to have failed, |
56 | * and we will print an error. | |
57 | */ | |
c9c3b1a5 ID |
58 | #define WAIT_FOR_BBP(__dev, __reg) \ |
59 | rt2x00pci_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg)) | |
60 | #define WAIT_FOR_RF(__dev, __reg) \ | |
61 | rt2x00pci_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg)) | |
62 | #define WAIT_FOR_MCU(__dev, __reg) \ | |
63 | rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \ | |
64 | H2M_MAILBOX_CSR_OWNER, (__reg)) | |
95ea3627 | 65 | |
0e14f6d3 | 66 | static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev, |
95ea3627 ID |
67 | const unsigned int word, const u8 value) |
68 | { | |
69 | u32 reg; | |
70 | ||
8ff48a8b ID |
71 | mutex_lock(&rt2x00dev->csr_mutex); |
72 | ||
95ea3627 | 73 | /* |
c9c3b1a5 ID |
74 | * Wait until the BBP becomes available, afterwards we |
75 | * can safely write the new data into the register. | |
95ea3627 | 76 | */ |
c9c3b1a5 ID |
77 | if (WAIT_FOR_BBP(rt2x00dev, ®)) { |
78 | reg = 0; | |
79 | rt2x00_set_field32(®, PHY_CSR3_VALUE, value); | |
80 | rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); | |
81 | rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); | |
82 | rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); | |
83 | ||
84 | rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); | |
85 | } | |
8ff48a8b | 86 | |
8ff48a8b | 87 | mutex_unlock(&rt2x00dev->csr_mutex); |
95ea3627 ID |
88 | } |
89 | ||
0e14f6d3 | 90 | static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev, |
95ea3627 ID |
91 | const unsigned int word, u8 *value) |
92 | { | |
93 | u32 reg; | |
94 | ||
8ff48a8b ID |
95 | mutex_lock(&rt2x00dev->csr_mutex); |
96 | ||
95ea3627 | 97 | /* |
c9c3b1a5 ID |
98 | * Wait until the BBP becomes available, afterwards we |
99 | * can safely write the read request into the register. | |
100 | * After the data has been written, we wait until hardware | |
101 | * returns the correct value, if at any time the register | |
102 | * doesn't become available in time, reg will be 0xffffffff | |
103 | * which means we return 0xff to the caller. | |
95ea3627 | 104 | */ |
c9c3b1a5 ID |
105 | if (WAIT_FOR_BBP(rt2x00dev, ®)) { |
106 | reg = 0; | |
107 | rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); | |
108 | rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); | |
109 | rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); | |
95ea3627 | 110 | |
c9c3b1a5 | 111 | rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); |
95ea3627 | 112 | |
c9c3b1a5 ID |
113 | WAIT_FOR_BBP(rt2x00dev, ®); |
114 | } | |
95ea3627 ID |
115 | |
116 | *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); | |
8ff48a8b | 117 | |
8ff48a8b | 118 | mutex_unlock(&rt2x00dev->csr_mutex); |
95ea3627 ID |
119 | } |
120 | ||
0e14f6d3 | 121 | static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev, |
95ea3627 ID |
122 | const unsigned int word, const u32 value) |
123 | { | |
124 | u32 reg; | |
95ea3627 | 125 | |
8ff48a8b ID |
126 | mutex_lock(&rt2x00dev->csr_mutex); |
127 | ||
c9c3b1a5 ID |
128 | /* |
129 | * Wait until the RF becomes available, afterwards we | |
130 | * can safely write the new data into the register. | |
131 | */ | |
132 | if (WAIT_FOR_RF(rt2x00dev, ®)) { | |
133 | reg = 0; | |
134 | rt2x00_set_field32(®, PHY_CSR4_VALUE, value); | |
135 | rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, 21); | |
136 | rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); | |
137 | rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); | |
138 | ||
139 | rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg); | |
140 | rt2x00_rf_write(rt2x00dev, word, value); | |
95ea3627 ID |
141 | } |
142 | ||
8ff48a8b | 143 | mutex_unlock(&rt2x00dev->csr_mutex); |
95ea3627 ID |
144 | } |
145 | ||
0e14f6d3 | 146 | static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev, |
95ea3627 ID |
147 | const u8 command, const u8 token, |
148 | const u8 arg0, const u8 arg1) | |
149 | { | |
150 | u32 reg; | |
151 | ||
8ff48a8b ID |
152 | mutex_lock(&rt2x00dev->csr_mutex); |
153 | ||
c9c3b1a5 ID |
154 | /* |
155 | * Wait until the MCU becomes available, afterwards we | |
156 | * can safely write the new data into the register. | |
157 | */ | |
158 | if (WAIT_FOR_MCU(rt2x00dev, ®)) { | |
159 | rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); | |
160 | rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); | |
161 | rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); | |
162 | rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); | |
163 | rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg); | |
164 | ||
165 | rt2x00pci_register_read(rt2x00dev, HOST_CMD_CSR, ®); | |
166 | rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); | |
167 | rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1); | |
168 | rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); | |
169 | } | |
8ff48a8b | 170 | |
8ff48a8b ID |
171 | mutex_unlock(&rt2x00dev->csr_mutex); |
172 | ||
95ea3627 ID |
173 | } |
174 | ||
175 | static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom) | |
176 | { | |
177 | struct rt2x00_dev *rt2x00dev = eeprom->data; | |
178 | u32 reg; | |
179 | ||
180 | rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); | |
181 | ||
182 | eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN); | |
183 | eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT); | |
184 | eeprom->reg_data_clock = | |
185 | !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK); | |
186 | eeprom->reg_chip_select = | |
187 | !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT); | |
188 | } | |
189 | ||
190 | static void rt61pci_eepromregister_write(struct eeprom_93cx6 *eeprom) | |
191 | { | |
192 | struct rt2x00_dev *rt2x00dev = eeprom->data; | |
193 | u32 reg = 0; | |
194 | ||
195 | rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in); | |
196 | rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out); | |
197 | rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK, | |
198 | !!eeprom->reg_data_clock); | |
199 | rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT, | |
200 | !!eeprom->reg_chip_select); | |
201 | ||
202 | rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg); | |
203 | } | |
204 | ||
205 | #ifdef CONFIG_RT2X00_LIB_DEBUGFS | |
95ea3627 ID |
206 | static const struct rt2x00debug rt61pci_rt2x00debug = { |
207 | .owner = THIS_MODULE, | |
208 | .csr = { | |
743b97ca ID |
209 | .read = rt2x00pci_register_read, |
210 | .write = rt2x00pci_register_write, | |
211 | .flags = RT2X00DEBUGFS_OFFSET, | |
212 | .word_base = CSR_REG_BASE, | |
95ea3627 ID |
213 | .word_size = sizeof(u32), |
214 | .word_count = CSR_REG_SIZE / sizeof(u32), | |
215 | }, | |
216 | .eeprom = { | |
217 | .read = rt2x00_eeprom_read, | |
218 | .write = rt2x00_eeprom_write, | |
743b97ca | 219 | .word_base = EEPROM_BASE, |
95ea3627 ID |
220 | .word_size = sizeof(u16), |
221 | .word_count = EEPROM_SIZE / sizeof(u16), | |
222 | }, | |
223 | .bbp = { | |
224 | .read = rt61pci_bbp_read, | |
225 | .write = rt61pci_bbp_write, | |
743b97ca | 226 | .word_base = BBP_BASE, |
95ea3627 ID |
227 | .word_size = sizeof(u8), |
228 | .word_count = BBP_SIZE / sizeof(u8), | |
229 | }, | |
230 | .rf = { | |
231 | .read = rt2x00_rf_read, | |
232 | .write = rt61pci_rf_write, | |
743b97ca | 233 | .word_base = RF_BASE, |
95ea3627 ID |
234 | .word_size = sizeof(u32), |
235 | .word_count = RF_SIZE / sizeof(u32), | |
236 | }, | |
237 | }; | |
238 | #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ | |
239 | ||
95ea3627 ID |
240 | static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) |
241 | { | |
242 | u32 reg; | |
243 | ||
244 | rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); | |
181d6902 | 245 | return rt2x00_get_field32(reg, MAC_CSR13_BIT5); |
95ea3627 | 246 | } |
95ea3627 | 247 | |
771fd565 | 248 | #ifdef CONFIG_RT2X00_LIB_LEDS |
a2e1d52a | 249 | static void rt61pci_brightness_set(struct led_classdev *led_cdev, |
a9450b70 ID |
250 | enum led_brightness brightness) |
251 | { | |
252 | struct rt2x00_led *led = | |
253 | container_of(led_cdev, struct rt2x00_led, led_dev); | |
254 | unsigned int enabled = brightness != LED_OFF; | |
255 | unsigned int a_mode = | |
256 | (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); | |
257 | unsigned int bg_mode = | |
258 | (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); | |
259 | ||
260 | if (led->type == LED_TYPE_RADIO) { | |
261 | rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, | |
262 | MCU_LEDCS_RADIO_STATUS, enabled); | |
263 | ||
264 | rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, | |
265 | (led->rt2x00dev->led_mcu_reg & 0xff), | |
266 | ((led->rt2x00dev->led_mcu_reg >> 8))); | |
267 | } else if (led->type == LED_TYPE_ASSOC) { | |
268 | rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, | |
269 | MCU_LEDCS_LINK_BG_STATUS, bg_mode); | |
270 | rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, | |
271 | MCU_LEDCS_LINK_A_STATUS, a_mode); | |
272 | ||
273 | rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, | |
274 | (led->rt2x00dev->led_mcu_reg & 0xff), | |
275 | ((led->rt2x00dev->led_mcu_reg >> 8))); | |
276 | } else if (led->type == LED_TYPE_QUALITY) { | |
277 | /* | |
278 | * The brightness is divided into 6 levels (0 - 5), | |
279 | * this means we need to convert the brightness | |
280 | * argument into the matching level within that range. | |
281 | */ | |
282 | rt61pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, | |
283 | brightness / (LED_FULL / 6), 0); | |
284 | } | |
285 | } | |
a2e1d52a ID |
286 | |
287 | static int rt61pci_blink_set(struct led_classdev *led_cdev, | |
288 | unsigned long *delay_on, | |
289 | unsigned long *delay_off) | |
290 | { | |
291 | struct rt2x00_led *led = | |
292 | container_of(led_cdev, struct rt2x00_led, led_dev); | |
293 | u32 reg; | |
294 | ||
295 | rt2x00pci_register_read(led->rt2x00dev, MAC_CSR14, ®); | |
296 | rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, *delay_on); | |
297 | rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, *delay_off); | |
298 | rt2x00pci_register_write(led->rt2x00dev, MAC_CSR14, reg); | |
299 | ||
300 | return 0; | |
301 | } | |
475433be ID |
302 | |
303 | static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev, | |
304 | struct rt2x00_led *led, | |
305 | enum led_type type) | |
306 | { | |
307 | led->rt2x00dev = rt2x00dev; | |
308 | led->type = type; | |
309 | led->led_dev.brightness_set = rt61pci_brightness_set; | |
310 | led->led_dev.blink_set = rt61pci_blink_set; | |
311 | led->flags = LED_INITIALIZED; | |
312 | } | |
771fd565 | 313 | #endif /* CONFIG_RT2X00_LIB_LEDS */ |
a9450b70 | 314 | |
95ea3627 ID |
315 | /* |
316 | * Configuration handlers. | |
317 | */ | |
61e754f4 ID |
318 | static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev, |
319 | struct rt2x00lib_crypto *crypto, | |
320 | struct ieee80211_key_conf *key) | |
321 | { | |
322 | struct hw_key_entry key_entry; | |
323 | struct rt2x00_field32 field; | |
324 | u32 mask; | |
325 | u32 reg; | |
326 | ||
327 | if (crypto->cmd == SET_KEY) { | |
328 | /* | |
329 | * rt2x00lib can't determine the correct free | |
330 | * key_idx for shared keys. We have 1 register | |
331 | * with key valid bits. The goal is simple, read | |
332 | * the register, if that is full we have no slots | |
333 | * left. | |
334 | * Note that each BSS is allowed to have up to 4 | |
335 | * shared keys, so put a mask over the allowed | |
336 | * entries. | |
337 | */ | |
338 | mask = (0xf << crypto->bssidx); | |
339 | ||
340 | rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®); | |
341 | reg &= mask; | |
342 | ||
343 | if (reg && reg == mask) | |
344 | return -ENOSPC; | |
345 | ||
acaf908d | 346 | key->hw_key_idx += reg ? ffz(reg) : 0; |
61e754f4 ID |
347 | |
348 | /* | |
349 | * Upload key to hardware | |
350 | */ | |
351 | memcpy(key_entry.key, crypto->key, | |
352 | sizeof(key_entry.key)); | |
353 | memcpy(key_entry.tx_mic, crypto->tx_mic, | |
354 | sizeof(key_entry.tx_mic)); | |
355 | memcpy(key_entry.rx_mic, crypto->rx_mic, | |
356 | sizeof(key_entry.rx_mic)); | |
357 | ||
358 | reg = SHARED_KEY_ENTRY(key->hw_key_idx); | |
359 | rt2x00pci_register_multiwrite(rt2x00dev, reg, | |
360 | &key_entry, sizeof(key_entry)); | |
361 | ||
362 | /* | |
363 | * The cipher types are stored over 2 registers. | |
364 | * bssidx 0 and 1 keys are stored in SEC_CSR1 and | |
365 | * bssidx 1 and 2 keys are stored in SEC_CSR5. | |
366 | * Using the correct defines correctly will cause overhead, | |
367 | * so just calculate the correct offset. | |
368 | */ | |
369 | if (key->hw_key_idx < 8) { | |
370 | field.bit_offset = (3 * key->hw_key_idx); | |
371 | field.bit_mask = 0x7 << field.bit_offset; | |
372 | ||
373 | rt2x00pci_register_read(rt2x00dev, SEC_CSR1, ®); | |
374 | rt2x00_set_field32(®, field, crypto->cipher); | |
375 | rt2x00pci_register_write(rt2x00dev, SEC_CSR1, reg); | |
376 | } else { | |
377 | field.bit_offset = (3 * (key->hw_key_idx - 8)); | |
378 | field.bit_mask = 0x7 << field.bit_offset; | |
379 | ||
380 | rt2x00pci_register_read(rt2x00dev, SEC_CSR5, ®); | |
381 | rt2x00_set_field32(®, field, crypto->cipher); | |
382 | rt2x00pci_register_write(rt2x00dev, SEC_CSR5, reg); | |
383 | } | |
384 | ||
385 | /* | |
386 | * The driver does not support the IV/EIV generation | |
387 | * in hardware. However it doesn't support the IV/EIV | |
388 | * inside the ieee80211 frame either, but requires it | |
b34e620f | 389 | * to be provided separately for the descriptor. |
61e754f4 ID |
390 | * rt2x00lib will cut the IV/EIV data out of all frames |
391 | * given to us by mac80211, but we must tell mac80211 | |
392 | * to generate the IV/EIV data. | |
393 | */ | |
394 | key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; | |
395 | } | |
396 | ||
397 | /* | |
398 | * SEC_CSR0 contains only single-bit fields to indicate | |
399 | * a particular key is valid. Because using the FIELD32() | |
b34e620f | 400 | * defines directly will cause a lot of overhead, we use |
61e754f4 ID |
401 | * a calculation to determine the correct bit directly. |
402 | */ | |
403 | mask = 1 << key->hw_key_idx; | |
404 | ||
405 | rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®); | |
406 | if (crypto->cmd == SET_KEY) | |
407 | reg |= mask; | |
408 | else if (crypto->cmd == DISABLE_KEY) | |
409 | reg &= ~mask; | |
410 | rt2x00pci_register_write(rt2x00dev, SEC_CSR0, reg); | |
411 | ||
412 | return 0; | |
413 | } | |
414 | ||
415 | static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, | |
416 | struct rt2x00lib_crypto *crypto, | |
417 | struct ieee80211_key_conf *key) | |
418 | { | |
419 | struct hw_pairwise_ta_entry addr_entry; | |
420 | struct hw_key_entry key_entry; | |
421 | u32 mask; | |
422 | u32 reg; | |
423 | ||
424 | if (crypto->cmd == SET_KEY) { | |
425 | /* | |
426 | * rt2x00lib can't determine the correct free | |
427 | * key_idx for pairwise keys. We have 2 registers | |
b34e620f TLSC |
428 | * with key valid bits. The goal is simple: read |
429 | * the first register. If that is full, move to | |
61e754f4 | 430 | * the next register. |
b34e620f TLSC |
431 | * When both registers are full, we drop the key. |
432 | * Otherwise, we use the first invalid entry. | |
61e754f4 ID |
433 | */ |
434 | rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®); | |
435 | if (reg && reg == ~0) { | |
436 | key->hw_key_idx = 32; | |
437 | rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®); | |
438 | if (reg && reg == ~0) | |
439 | return -ENOSPC; | |
440 | } | |
441 | ||
acaf908d | 442 | key->hw_key_idx += reg ? ffz(reg) : 0; |
61e754f4 ID |
443 | |
444 | /* | |
445 | * Upload key to hardware | |
446 | */ | |
447 | memcpy(key_entry.key, crypto->key, | |
448 | sizeof(key_entry.key)); | |
449 | memcpy(key_entry.tx_mic, crypto->tx_mic, | |
450 | sizeof(key_entry.tx_mic)); | |
451 | memcpy(key_entry.rx_mic, crypto->rx_mic, | |
452 | sizeof(key_entry.rx_mic)); | |
453 | ||
454 | memset(&addr_entry, 0, sizeof(addr_entry)); | |
455 | memcpy(&addr_entry, crypto->address, ETH_ALEN); | |
456 | addr_entry.cipher = crypto->cipher; | |
457 | ||
458 | reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx); | |
459 | rt2x00pci_register_multiwrite(rt2x00dev, reg, | |
460 | &key_entry, sizeof(key_entry)); | |
461 | ||
462 | reg = PAIRWISE_TA_ENTRY(key->hw_key_idx); | |
463 | rt2x00pci_register_multiwrite(rt2x00dev, reg, | |
464 | &addr_entry, sizeof(addr_entry)); | |
465 | ||
466 | /* | |
b34e620f TLSC |
467 | * Enable pairwise lookup table for given BSS idx. |
468 | * Without this, received frames will not be decrypted | |
61e754f4 ID |
469 | * by the hardware. |
470 | */ | |
471 | rt2x00pci_register_read(rt2x00dev, SEC_CSR4, ®); | |
472 | reg |= (1 << crypto->bssidx); | |
473 | rt2x00pci_register_write(rt2x00dev, SEC_CSR4, reg); | |
474 | ||
475 | /* | |
476 | * The driver does not support the IV/EIV generation | |
477 | * in hardware. However it doesn't support the IV/EIV | |
478 | * inside the ieee80211 frame either, but requires it | |
3ad2f3fb | 479 | * to be provided separately for the descriptor. |
61e754f4 ID |
480 | * rt2x00lib will cut the IV/EIV data out of all frames |
481 | * given to us by mac80211, but we must tell mac80211 | |
482 | * to generate the IV/EIV data. | |
483 | */ | |
484 | key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; | |
485 | } | |
486 | ||
487 | /* | |
488 | * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate | |
489 | * a particular key is valid. Because using the FIELD32() | |
b34e620f | 490 | * defines directly will cause a lot of overhead, we use |
61e754f4 ID |
491 | * a calculation to determine the correct bit directly. |
492 | */ | |
493 | if (key->hw_key_idx < 32) { | |
494 | mask = 1 << key->hw_key_idx; | |
495 | ||
496 | rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®); | |
497 | if (crypto->cmd == SET_KEY) | |
498 | reg |= mask; | |
499 | else if (crypto->cmd == DISABLE_KEY) | |
500 | reg &= ~mask; | |
501 | rt2x00pci_register_write(rt2x00dev, SEC_CSR2, reg); | |
502 | } else { | |
503 | mask = 1 << (key->hw_key_idx - 32); | |
504 | ||
505 | rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®); | |
506 | if (crypto->cmd == SET_KEY) | |
507 | reg |= mask; | |
508 | else if (crypto->cmd == DISABLE_KEY) | |
509 | reg &= ~mask; | |
510 | rt2x00pci_register_write(rt2x00dev, SEC_CSR3, reg); | |
511 | } | |
512 | ||
513 | return 0; | |
514 | } | |
515 | ||
3a643d24 ID |
516 | static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev, |
517 | const unsigned int filter_flags) | |
518 | { | |
519 | u32 reg; | |
520 | ||
521 | /* | |
522 | * Start configuration steps. | |
523 | * Note that the version error will always be dropped | |
524 | * and broadcast frames will always be accepted since | |
525 | * there is no filter for it at this time. | |
526 | */ | |
527 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); | |
528 | rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, | |
529 | !(filter_flags & FIF_FCSFAIL)); | |
530 | rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, | |
531 | !(filter_flags & FIF_PLCPFAIL)); | |
532 | rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, | |
1afcfd54 | 533 | !(filter_flags & (FIF_CONTROL | FIF_PSPOLL))); |
3a643d24 ID |
534 | rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, |
535 | !(filter_flags & FIF_PROMISC_IN_BSS)); | |
536 | rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, | |
e0b005fa ID |
537 | !(filter_flags & FIF_PROMISC_IN_BSS) && |
538 | !rt2x00dev->intf_ap_count); | |
3a643d24 ID |
539 | rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); |
540 | rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, | |
541 | !(filter_flags & FIF_ALLMULTI)); | |
542 | rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0); | |
543 | rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, | |
544 | !(filter_flags & FIF_CONTROL)); | |
545 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); | |
546 | } | |
547 | ||
6bb40dd1 ID |
548 | static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev, |
549 | struct rt2x00_intf *intf, | |
550 | struct rt2x00intf_conf *conf, | |
551 | const unsigned int flags) | |
95ea3627 | 552 | { |
6bb40dd1 ID |
553 | unsigned int beacon_base; |
554 | u32 reg; | |
95ea3627 | 555 | |
6bb40dd1 ID |
556 | if (flags & CONFIG_UPDATE_TYPE) { |
557 | /* | |
558 | * Clear current synchronisation setup. | |
b34e620f | 559 | * For the Beacon base registers, we only need to clear |
6bb40dd1 ID |
560 | * the first byte since that byte contains the VALID and OWNER |
561 | * bits which (when set to 0) will invalidate the entire beacon. | |
562 | */ | |
563 | beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); | |
6bb40dd1 | 564 | rt2x00pci_register_write(rt2x00dev, beacon_base, 0); |
95ea3627 | 565 | |
6bb40dd1 ID |
566 | /* |
567 | * Enable synchronisation. | |
568 | */ | |
569 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); | |
fd3c91c5 | 570 | rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); |
6bb40dd1 | 571 | rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync); |
fd3c91c5 | 572 | rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); |
6bb40dd1 ID |
573 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); |
574 | } | |
95ea3627 | 575 | |
6bb40dd1 ID |
576 | if (flags & CONFIG_UPDATE_MAC) { |
577 | reg = le32_to_cpu(conf->mac[1]); | |
578 | rt2x00_set_field32(®, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); | |
579 | conf->mac[1] = cpu_to_le32(reg); | |
95ea3627 | 580 | |
6bb40dd1 ID |
581 | rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, |
582 | conf->mac, sizeof(conf->mac)); | |
583 | } | |
95ea3627 | 584 | |
6bb40dd1 ID |
585 | if (flags & CONFIG_UPDATE_BSSID) { |
586 | reg = le32_to_cpu(conf->bssid[1]); | |
587 | rt2x00_set_field32(®, MAC_CSR5_BSS_ID_MASK, 3); | |
588 | conf->bssid[1] = cpu_to_le32(reg); | |
95ea3627 | 589 | |
6bb40dd1 ID |
590 | rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, |
591 | conf->bssid, sizeof(conf->bssid)); | |
592 | } | |
95ea3627 ID |
593 | } |
594 | ||
3a643d24 ID |
595 | static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev, |
596 | struct rt2x00lib_erp *erp) | |
95ea3627 | 597 | { |
95ea3627 | 598 | u32 reg; |
95ea3627 ID |
599 | |
600 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); | |
4789666e | 601 | rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, 0x32); |
8a566afe | 602 | rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER); |
95ea3627 ID |
603 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); |
604 | ||
605 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); | |
8a566afe | 606 | rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); |
4f5af6eb | 607 | rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, |
72810379 | 608 | !!erp->short_preamble); |
95ea3627 | 609 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); |
95ea3627 | 610 | |
e4ea1c40 | 611 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates); |
95ea3627 | 612 | |
8a566afe ID |
613 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); |
614 | rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, | |
615 | erp->beacon_int * 16); | |
616 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); | |
617 | ||
e4ea1c40 ID |
618 | rt2x00pci_register_read(rt2x00dev, MAC_CSR9, ®); |
619 | rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, erp->slot_time); | |
620 | rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg); | |
95ea3627 | 621 | |
e4ea1c40 ID |
622 | rt2x00pci_register_read(rt2x00dev, MAC_CSR8, ®); |
623 | rt2x00_set_field32(®, MAC_CSR8_SIFS, erp->sifs); | |
624 | rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); | |
625 | rt2x00_set_field32(®, MAC_CSR8_EIFS, erp->eifs); | |
626 | rt2x00pci_register_write(rt2x00dev, MAC_CSR8, reg); | |
95ea3627 ID |
627 | } |
628 | ||
629 | static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev, | |
addc81bd | 630 | struct antenna_setup *ant) |
95ea3627 ID |
631 | { |
632 | u8 r3; | |
633 | u8 r4; | |
634 | u8 r77; | |
635 | ||
636 | rt61pci_bbp_read(rt2x00dev, 3, &r3); | |
637 | rt61pci_bbp_read(rt2x00dev, 4, &r4); | |
638 | rt61pci_bbp_read(rt2x00dev, 77, &r77); | |
639 | ||
5122d898 | 640 | rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF5325)); |
e4cd2ff8 ID |
641 | |
642 | /* | |
643 | * Configure the RX antenna. | |
644 | */ | |
addc81bd | 645 | switch (ant->rx) { |
95ea3627 | 646 | case ANTENNA_HW_DIVERSITY: |
acaa410d | 647 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2); |
95ea3627 | 648 | rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, |
8318d78a | 649 | (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ)); |
95ea3627 ID |
650 | break; |
651 | case ANTENNA_A: | |
acaa410d | 652 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); |
95ea3627 | 653 | rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); |
8318d78a | 654 | if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) |
acaa410d MN |
655 | rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); |
656 | else | |
657 | rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); | |
95ea3627 ID |
658 | break; |
659 | case ANTENNA_B: | |
a4fe07d9 | 660 | default: |
acaa410d | 661 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); |
95ea3627 | 662 | rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); |
8318d78a | 663 | if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) |
acaa410d MN |
664 | rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); |
665 | else | |
666 | rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); | |
95ea3627 ID |
667 | break; |
668 | } | |
669 | ||
670 | rt61pci_bbp_write(rt2x00dev, 77, r77); | |
671 | rt61pci_bbp_write(rt2x00dev, 3, r3); | |
672 | rt61pci_bbp_write(rt2x00dev, 4, r4); | |
673 | } | |
674 | ||
675 | static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev, | |
addc81bd | 676 | struct antenna_setup *ant) |
95ea3627 ID |
677 | { |
678 | u8 r3; | |
679 | u8 r4; | |
680 | u8 r77; | |
681 | ||
682 | rt61pci_bbp_read(rt2x00dev, 3, &r3); | |
683 | rt61pci_bbp_read(rt2x00dev, 4, &r4); | |
684 | rt61pci_bbp_read(rt2x00dev, 77, &r77); | |
685 | ||
5122d898 | 686 | rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF2529)); |
95ea3627 ID |
687 | rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, |
688 | !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)); | |
689 | ||
e4cd2ff8 ID |
690 | /* |
691 | * Configure the RX antenna. | |
692 | */ | |
addc81bd | 693 | switch (ant->rx) { |
95ea3627 | 694 | case ANTENNA_HW_DIVERSITY: |
acaa410d | 695 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2); |
95ea3627 ID |
696 | break; |
697 | case ANTENNA_A: | |
acaa410d MN |
698 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); |
699 | rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); | |
95ea3627 ID |
700 | break; |
701 | case ANTENNA_B: | |
a4fe07d9 | 702 | default: |
acaa410d MN |
703 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); |
704 | rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); | |
95ea3627 ID |
705 | break; |
706 | } | |
707 | ||
708 | rt61pci_bbp_write(rt2x00dev, 77, r77); | |
709 | rt61pci_bbp_write(rt2x00dev, 3, r3); | |
710 | rt61pci_bbp_write(rt2x00dev, 4, r4); | |
711 | } | |
712 | ||
713 | static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev, | |
714 | const int p1, const int p2) | |
715 | { | |
716 | u32 reg; | |
717 | ||
718 | rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); | |
719 | ||
acaa410d MN |
720 | rt2x00_set_field32(®, MAC_CSR13_BIT4, p1); |
721 | rt2x00_set_field32(®, MAC_CSR13_BIT12, 0); | |
722 | ||
723 | rt2x00_set_field32(®, MAC_CSR13_BIT3, !p2); | |
724 | rt2x00_set_field32(®, MAC_CSR13_BIT11, 0); | |
725 | ||
726 | rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg); | |
95ea3627 ID |
727 | } |
728 | ||
729 | static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev, | |
addc81bd | 730 | struct antenna_setup *ant) |
95ea3627 | 731 | { |
95ea3627 ID |
732 | u8 r3; |
733 | u8 r4; | |
734 | u8 r77; | |
735 | ||
736 | rt61pci_bbp_read(rt2x00dev, 3, &r3); | |
737 | rt61pci_bbp_read(rt2x00dev, 4, &r4); | |
738 | rt61pci_bbp_read(rt2x00dev, 77, &r77); | |
e4cd2ff8 | 739 | |
e4cd2ff8 ID |
740 | /* |
741 | * Configure the RX antenna. | |
742 | */ | |
743 | switch (ant->rx) { | |
744 | case ANTENNA_A: | |
acaa410d MN |
745 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); |
746 | rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); | |
747 | rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0); | |
e4cd2ff8 | 748 | break; |
e4cd2ff8 ID |
749 | case ANTENNA_HW_DIVERSITY: |
750 | /* | |
a4fe07d9 ID |
751 | * FIXME: Antenna selection for the rf 2529 is very confusing |
752 | * in the legacy driver. Just default to antenna B until the | |
753 | * legacy code can be properly translated into rt2x00 code. | |
e4cd2ff8 ID |
754 | */ |
755 | case ANTENNA_B: | |
a4fe07d9 | 756 | default: |
acaa410d MN |
757 | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); |
758 | rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); | |
759 | rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); | |
e4cd2ff8 ID |
760 | break; |
761 | } | |
762 | ||
e4cd2ff8 | 763 | rt61pci_bbp_write(rt2x00dev, 77, r77); |
95ea3627 ID |
764 | rt61pci_bbp_write(rt2x00dev, 3, r3); |
765 | rt61pci_bbp_write(rt2x00dev, 4, r4); | |
766 | } | |
767 | ||
768 | struct antenna_sel { | |
769 | u8 word; | |
770 | /* | |
771 | * value[0] -> non-LNA | |
772 | * value[1] -> LNA | |
773 | */ | |
774 | u8 value[2]; | |
775 | }; | |
776 | ||
777 | static const struct antenna_sel antenna_sel_a[] = { | |
778 | { 96, { 0x58, 0x78 } }, | |
779 | { 104, { 0x38, 0x48 } }, | |
780 | { 75, { 0xfe, 0x80 } }, | |
781 | { 86, { 0xfe, 0x80 } }, | |
782 | { 88, { 0xfe, 0x80 } }, | |
783 | { 35, { 0x60, 0x60 } }, | |
784 | { 97, { 0x58, 0x58 } }, | |
785 | { 98, { 0x58, 0x58 } }, | |
786 | }; | |
787 | ||
788 | static const struct antenna_sel antenna_sel_bg[] = { | |
789 | { 96, { 0x48, 0x68 } }, | |
790 | { 104, { 0x2c, 0x3c } }, | |
791 | { 75, { 0xfe, 0x80 } }, | |
792 | { 86, { 0xfe, 0x80 } }, | |
793 | { 88, { 0xfe, 0x80 } }, | |
794 | { 35, { 0x50, 0x50 } }, | |
795 | { 97, { 0x48, 0x48 } }, | |
796 | { 98, { 0x48, 0x48 } }, | |
797 | }; | |
798 | ||
e4ea1c40 ID |
799 | static void rt61pci_config_ant(struct rt2x00_dev *rt2x00dev, |
800 | struct antenna_setup *ant) | |
95ea3627 ID |
801 | { |
802 | const struct antenna_sel *sel; | |
803 | unsigned int lna; | |
804 | unsigned int i; | |
805 | u32 reg; | |
806 | ||
a4fe07d9 ID |
807 | /* |
808 | * We should never come here because rt2x00lib is supposed | |
809 | * to catch this and send us the correct antenna explicitely. | |
810 | */ | |
811 | BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || | |
812 | ant->tx == ANTENNA_SW_DIVERSITY); | |
813 | ||
8318d78a | 814 | if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { |
95ea3627 ID |
815 | sel = antenna_sel_a; |
816 | lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); | |
95ea3627 ID |
817 | } else { |
818 | sel = antenna_sel_bg; | |
819 | lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); | |
95ea3627 ID |
820 | } |
821 | ||
acaa410d MN |
822 | for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++) |
823 | rt61pci_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]); | |
824 | ||
825 | rt2x00pci_register_read(rt2x00dev, PHY_CSR0, ®); | |
826 | ||
ddc827f9 | 827 | rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, |
8318d78a | 828 | rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); |
ddc827f9 | 829 | rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, |
8318d78a | 830 | rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); |
ddc827f9 | 831 | |
95ea3627 ID |
832 | rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg); |
833 | ||
5122d898 | 834 | if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF5325)) |
addc81bd | 835 | rt61pci_config_antenna_5x(rt2x00dev, ant); |
5122d898 | 836 | else if (rt2x00_rf(rt2x00dev, RF2527)) |
addc81bd | 837 | rt61pci_config_antenna_2x(rt2x00dev, ant); |
5122d898 | 838 | else if (rt2x00_rf(rt2x00dev, RF2529)) { |
95ea3627 | 839 | if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) |
addc81bd | 840 | rt61pci_config_antenna_2x(rt2x00dev, ant); |
95ea3627 | 841 | else |
addc81bd | 842 | rt61pci_config_antenna_2529(rt2x00dev, ant); |
95ea3627 ID |
843 | } |
844 | } | |
845 | ||
e4ea1c40 ID |
846 | static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev, |
847 | struct rt2x00lib_conf *libconf) | |
848 | { | |
849 | u16 eeprom; | |
850 | short lna_gain = 0; | |
851 | ||
852 | if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) { | |
853 | if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) | |
854 | lna_gain += 14; | |
855 | ||
856 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); | |
857 | lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); | |
858 | } else { | |
859 | if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) | |
860 | lna_gain += 14; | |
861 | ||
862 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); | |
863 | lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); | |
864 | } | |
865 | ||
866 | rt2x00dev->lna_gain = lna_gain; | |
867 | } | |
868 | ||
869 | static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev, | |
870 | struct rf_channel *rf, const int txpower) | |
871 | { | |
872 | u8 r3; | |
873 | u8 r94; | |
874 | u8 smart; | |
875 | ||
876 | rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); | |
877 | rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); | |
878 | ||
5122d898 | 879 | smart = !(rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527)); |
e4ea1c40 ID |
880 | |
881 | rt61pci_bbp_read(rt2x00dev, 3, &r3); | |
882 | rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart); | |
883 | rt61pci_bbp_write(rt2x00dev, 3, r3); | |
884 | ||
885 | r94 = 6; | |
886 | if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94)) | |
887 | r94 += txpower - MAX_TXPOWER; | |
888 | else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94)) | |
889 | r94 += txpower; | |
890 | rt61pci_bbp_write(rt2x00dev, 94, r94); | |
891 | ||
892 | rt61pci_rf_write(rt2x00dev, 1, rf->rf1); | |
893 | rt61pci_rf_write(rt2x00dev, 2, rf->rf2); | |
894 | rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); | |
895 | rt61pci_rf_write(rt2x00dev, 4, rf->rf4); | |
896 | ||
897 | udelay(200); | |
898 | ||
899 | rt61pci_rf_write(rt2x00dev, 1, rf->rf1); | |
900 | rt61pci_rf_write(rt2x00dev, 2, rf->rf2); | |
901 | rt61pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); | |
902 | rt61pci_rf_write(rt2x00dev, 4, rf->rf4); | |
903 | ||
904 | udelay(200); | |
905 | ||
906 | rt61pci_rf_write(rt2x00dev, 1, rf->rf1); | |
907 | rt61pci_rf_write(rt2x00dev, 2, rf->rf2); | |
908 | rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); | |
909 | rt61pci_rf_write(rt2x00dev, 4, rf->rf4); | |
910 | ||
911 | msleep(1); | |
912 | } | |
913 | ||
914 | static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev, | |
915 | const int txpower) | |
916 | { | |
917 | struct rf_channel rf; | |
918 | ||
919 | rt2x00_rf_read(rt2x00dev, 1, &rf.rf1); | |
920 | rt2x00_rf_read(rt2x00dev, 2, &rf.rf2); | |
921 | rt2x00_rf_read(rt2x00dev, 3, &rf.rf3); | |
922 | rt2x00_rf_read(rt2x00dev, 4, &rf.rf4); | |
923 | ||
924 | rt61pci_config_channel(rt2x00dev, &rf, txpower); | |
925 | } | |
926 | ||
927 | static void rt61pci_config_retry_limit(struct rt2x00_dev *rt2x00dev, | |
5c58ee51 | 928 | struct rt2x00lib_conf *libconf) |
95ea3627 ID |
929 | { |
930 | u32 reg; | |
931 | ||
e4ea1c40 ID |
932 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); |
933 | rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT, | |
934 | libconf->conf->long_frame_max_tx_count); | |
935 | rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT, | |
936 | libconf->conf->short_frame_max_tx_count); | |
937 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); | |
938 | } | |
95ea3627 | 939 | |
7d7f19cc ID |
940 | static void rt61pci_config_ps(struct rt2x00_dev *rt2x00dev, |
941 | struct rt2x00lib_conf *libconf) | |
942 | { | |
943 | enum dev_state state = | |
944 | (libconf->conf->flags & IEEE80211_CONF_PS) ? | |
945 | STATE_SLEEP : STATE_AWAKE; | |
946 | u32 reg; | |
947 | ||
948 | if (state == STATE_SLEEP) { | |
949 | rt2x00pci_register_read(rt2x00dev, MAC_CSR11, ®); | |
950 | rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN, | |
6b347bff | 951 | rt2x00dev->beacon_int - 10); |
7d7f19cc ID |
952 | rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP, |
953 | libconf->conf->listen_interval - 1); | |
954 | rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 5); | |
955 | ||
956 | /* We must first disable autowake before it can be enabled */ | |
957 | rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 0); | |
958 | rt2x00pci_register_write(rt2x00dev, MAC_CSR11, reg); | |
959 | ||
960 | rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 1); | |
961 | rt2x00pci_register_write(rt2x00dev, MAC_CSR11, reg); | |
962 | ||
963 | rt2x00pci_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000005); | |
964 | rt2x00pci_register_write(rt2x00dev, IO_CNTL_CSR, 0x0000001c); | |
965 | rt2x00pci_register_write(rt2x00dev, PCI_USEC_CSR, 0x00000060); | |
966 | ||
967 | rt61pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0); | |
968 | } else { | |
969 | rt2x00pci_register_read(rt2x00dev, MAC_CSR11, ®); | |
970 | rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN, 0); | |
971 | rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP, 0); | |
972 | rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 0); | |
973 | rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 0); | |
974 | rt2x00pci_register_write(rt2x00dev, MAC_CSR11, reg); | |
975 | ||
976 | rt2x00pci_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000007); | |
977 | rt2x00pci_register_write(rt2x00dev, IO_CNTL_CSR, 0x00000018); | |
978 | rt2x00pci_register_write(rt2x00dev, PCI_USEC_CSR, 0x00000020); | |
979 | ||
980 | rt61pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); | |
981 | } | |
982 | } | |
983 | ||
95ea3627 | 984 | static void rt61pci_config(struct rt2x00_dev *rt2x00dev, |
6bb40dd1 ID |
985 | struct rt2x00lib_conf *libconf, |
986 | const unsigned int flags) | |
95ea3627 | 987 | { |
ba2ab471 ID |
988 | /* Always recalculate LNA gain before changing configuration */ |
989 | rt61pci_config_lna_gain(rt2x00dev, libconf); | |
990 | ||
e4ea1c40 | 991 | if (flags & IEEE80211_CONF_CHANGE_CHANNEL) |
5c58ee51 ID |
992 | rt61pci_config_channel(rt2x00dev, &libconf->rf, |
993 | libconf->conf->power_level); | |
e4ea1c40 ID |
994 | if ((flags & IEEE80211_CONF_CHANGE_POWER) && |
995 | !(flags & IEEE80211_CONF_CHANGE_CHANNEL)) | |
5c58ee51 | 996 | rt61pci_config_txpower(rt2x00dev, libconf->conf->power_level); |
e4ea1c40 ID |
997 | if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) |
998 | rt61pci_config_retry_limit(rt2x00dev, libconf); | |
7d7f19cc ID |
999 | if (flags & IEEE80211_CONF_CHANGE_PS) |
1000 | rt61pci_config_ps(rt2x00dev, libconf); | |
95ea3627 ID |
1001 | } |
1002 | ||
95ea3627 ID |
1003 | /* |
1004 | * Link tuning | |
1005 | */ | |
ebcf26da ID |
1006 | static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev, |
1007 | struct link_qual *qual) | |
95ea3627 ID |
1008 | { |
1009 | u32 reg; | |
1010 | ||
1011 | /* | |
1012 | * Update FCS error count from register. | |
1013 | */ | |
1014 | rt2x00pci_register_read(rt2x00dev, STA_CSR0, ®); | |
ebcf26da | 1015 | qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR); |
95ea3627 ID |
1016 | |
1017 | /* | |
1018 | * Update False CCA count from register. | |
1019 | */ | |
1020 | rt2x00pci_register_read(rt2x00dev, STA_CSR1, ®); | |
ebcf26da | 1021 | qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); |
95ea3627 ID |
1022 | } |
1023 | ||
5352ff65 ID |
1024 | static inline void rt61pci_set_vgc(struct rt2x00_dev *rt2x00dev, |
1025 | struct link_qual *qual, u8 vgc_level) | |
eb20b4e8 | 1026 | { |
5352ff65 | 1027 | if (qual->vgc_level != vgc_level) { |
eb20b4e8 | 1028 | rt61pci_bbp_write(rt2x00dev, 17, vgc_level); |
5352ff65 ID |
1029 | qual->vgc_level = vgc_level; |
1030 | qual->vgc_level_reg = vgc_level; | |
eb20b4e8 ID |
1031 | } |
1032 | } | |
1033 | ||
5352ff65 ID |
1034 | static void rt61pci_reset_tuner(struct rt2x00_dev *rt2x00dev, |
1035 | struct link_qual *qual) | |
95ea3627 | 1036 | { |
5352ff65 | 1037 | rt61pci_set_vgc(rt2x00dev, qual, 0x20); |
95ea3627 ID |
1038 | } |
1039 | ||
5352ff65 ID |
1040 | static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev, |
1041 | struct link_qual *qual, const u32 count) | |
95ea3627 | 1042 | { |
95ea3627 ID |
1043 | u8 up_bound; |
1044 | u8 low_bound; | |
1045 | ||
95ea3627 ID |
1046 | /* |
1047 | * Determine r17 bounds. | |
1048 | */ | |
1497074a | 1049 | if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { |
95ea3627 ID |
1050 | low_bound = 0x28; |
1051 | up_bound = 0x48; | |
1052 | if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { | |
1053 | low_bound += 0x10; | |
1054 | up_bound += 0x10; | |
1055 | } | |
1056 | } else { | |
1057 | low_bound = 0x20; | |
1058 | up_bound = 0x40; | |
1059 | if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { | |
1060 | low_bound += 0x10; | |
1061 | up_bound += 0x10; | |
1062 | } | |
1063 | } | |
1064 | ||
6bb40dd1 ID |
1065 | /* |
1066 | * If we are not associated, we should go straight to the | |
1067 | * dynamic CCA tuning. | |
1068 | */ | |
1069 | if (!rt2x00dev->intf_associated) | |
1070 | goto dynamic_cca_tune; | |
1071 | ||
95ea3627 ID |
1072 | /* |
1073 | * Special big-R17 for very short distance | |
1074 | */ | |
5352ff65 ID |
1075 | if (qual->rssi >= -35) { |
1076 | rt61pci_set_vgc(rt2x00dev, qual, 0x60); | |
95ea3627 ID |
1077 | return; |
1078 | } | |
1079 | ||
1080 | /* | |
1081 | * Special big-R17 for short distance | |
1082 | */ | |
5352ff65 ID |
1083 | if (qual->rssi >= -58) { |
1084 | rt61pci_set_vgc(rt2x00dev, qual, up_bound); | |
95ea3627 ID |
1085 | return; |
1086 | } | |
1087 | ||
1088 | /* | |
1089 | * Special big-R17 for middle-short distance | |
1090 | */ | |
5352ff65 ID |
1091 | if (qual->rssi >= -66) { |
1092 | rt61pci_set_vgc(rt2x00dev, qual, low_bound + 0x10); | |
95ea3627 ID |
1093 | return; |
1094 | } | |
1095 | ||
1096 | /* | |
1097 | * Special mid-R17 for middle distance | |
1098 | */ | |
5352ff65 ID |
1099 | if (qual->rssi >= -74) { |
1100 | rt61pci_set_vgc(rt2x00dev, qual, low_bound + 0x08); | |
95ea3627 ID |
1101 | return; |
1102 | } | |
1103 | ||
1104 | /* | |
1105 | * Special case: Change up_bound based on the rssi. | |
1106 | * Lower up_bound when rssi is weaker then -74 dBm. | |
1107 | */ | |
5352ff65 | 1108 | up_bound -= 2 * (-74 - qual->rssi); |
95ea3627 ID |
1109 | if (low_bound > up_bound) |
1110 | up_bound = low_bound; | |
1111 | ||
5352ff65 ID |
1112 | if (qual->vgc_level > up_bound) { |
1113 | rt61pci_set_vgc(rt2x00dev, qual, up_bound); | |
95ea3627 ID |
1114 | return; |
1115 | } | |
1116 | ||
6bb40dd1 ID |
1117 | dynamic_cca_tune: |
1118 | ||
95ea3627 ID |
1119 | /* |
1120 | * r17 does not yet exceed upper limit, continue and base | |
1121 | * the r17 tuning on the false CCA count. | |
1122 | */ | |
5352ff65 ID |
1123 | if ((qual->false_cca > 512) && (qual->vgc_level < up_bound)) |
1124 | rt61pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level); | |
1125 | else if ((qual->false_cca < 100) && (qual->vgc_level > low_bound)) | |
1126 | rt61pci_set_vgc(rt2x00dev, qual, --qual->vgc_level); | |
95ea3627 ID |
1127 | } |
1128 | ||
1129 | /* | |
a7f3a06c | 1130 | * Firmware functions |
95ea3627 ID |
1131 | */ |
1132 | static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) | |
1133 | { | |
49e721ec | 1134 | u16 chip; |
95ea3627 ID |
1135 | char *fw_name; |
1136 | ||
49e721ec GW |
1137 | pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_DEVICE_ID, &chip); |
1138 | switch (chip) { | |
1139 | case RT2561_PCI_ID: | |
95ea3627 ID |
1140 | fw_name = FIRMWARE_RT2561; |
1141 | break; | |
49e721ec | 1142 | case RT2561s_PCI_ID: |
95ea3627 ID |
1143 | fw_name = FIRMWARE_RT2561s; |
1144 | break; | |
49e721ec | 1145 | case RT2661_PCI_ID: |
95ea3627 ID |
1146 | fw_name = FIRMWARE_RT2661; |
1147 | break; | |
1148 | default: | |
1149 | fw_name = NULL; | |
1150 | break; | |
1151 | } | |
1152 | ||
1153 | return fw_name; | |
1154 | } | |
1155 | ||
0cbe0064 ID |
1156 | static int rt61pci_check_firmware(struct rt2x00_dev *rt2x00dev, |
1157 | const u8 *data, const size_t len) | |
a7f3a06c | 1158 | { |
0cbe0064 | 1159 | u16 fw_crc; |
a7f3a06c ID |
1160 | u16 crc; |
1161 | ||
1162 | /* | |
0cbe0064 ID |
1163 | * Only support 8kb firmware files. |
1164 | */ | |
1165 | if (len != 8192) | |
1166 | return FW_BAD_LENGTH; | |
1167 | ||
1168 | /* | |
b34e620f TLSC |
1169 | * The last 2 bytes in the firmware array are the crc checksum itself. |
1170 | * This means that we should never pass those 2 bytes to the crc | |
a7f3a06c ID |
1171 | * algorithm. |
1172 | */ | |
0cbe0064 ID |
1173 | fw_crc = (data[len - 2] << 8 | data[len - 1]); |
1174 | ||
1175 | /* | |
1176 | * Use the crc itu-t algorithm. | |
1177 | */ | |
a7f3a06c ID |
1178 | crc = crc_itu_t(0, data, len - 2); |
1179 | crc = crc_itu_t_byte(crc, 0); | |
1180 | crc = crc_itu_t_byte(crc, 0); | |
1181 | ||
0cbe0064 | 1182 | return (fw_crc == crc) ? FW_OK : FW_BAD_CRC; |
a7f3a06c ID |
1183 | } |
1184 | ||
0cbe0064 ID |
1185 | static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, |
1186 | const u8 *data, const size_t len) | |
95ea3627 ID |
1187 | { |
1188 | int i; | |
1189 | u32 reg; | |
1190 | ||
1191 | /* | |
1192 | * Wait for stable hardware. | |
1193 | */ | |
1194 | for (i = 0; i < 100; i++) { | |
1195 | rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); | |
1196 | if (reg) | |
1197 | break; | |
1198 | msleep(1); | |
1199 | } | |
1200 | ||
1201 | if (!reg) { | |
1202 | ERROR(rt2x00dev, "Unstable hardware.\n"); | |
1203 | return -EBUSY; | |
1204 | } | |
1205 | ||
1206 | /* | |
1207 | * Prepare MCU and mailbox for firmware loading. | |
1208 | */ | |
1209 | reg = 0; | |
1210 | rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 1); | |
1211 | rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); | |
1212 | rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff); | |
1213 | rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); | |
1214 | rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, 0); | |
1215 | ||
1216 | /* | |
1217 | * Write firmware to device. | |
1218 | */ | |
1219 | reg = 0; | |
1220 | rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 1); | |
1221 | rt2x00_set_field32(®, MCU_CNTL_CSR_SELECT_BANK, 1); | |
1222 | rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); | |
1223 | ||
1224 | rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, | |
1225 | data, len); | |
1226 | ||
1227 | rt2x00_set_field32(®, MCU_CNTL_CSR_SELECT_BANK, 0); | |
1228 | rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); | |
1229 | ||
1230 | rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 0); | |
1231 | rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); | |
1232 | ||
1233 | for (i = 0; i < 100; i++) { | |
1234 | rt2x00pci_register_read(rt2x00dev, MCU_CNTL_CSR, ®); | |
1235 | if (rt2x00_get_field32(reg, MCU_CNTL_CSR_READY)) | |
1236 | break; | |
1237 | msleep(1); | |
1238 | } | |
1239 | ||
1240 | if (i == 100) { | |
1241 | ERROR(rt2x00dev, "MCU Control register not ready.\n"); | |
1242 | return -EBUSY; | |
1243 | } | |
1244 | ||
e6d3e902 ID |
1245 | /* |
1246 | * Hardware needs another millisecond before it is ready. | |
1247 | */ | |
1248 | msleep(1); | |
1249 | ||
95ea3627 ID |
1250 | /* |
1251 | * Reset MAC and BBP registers. | |
1252 | */ | |
1253 | reg = 0; | |
1254 | rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); | |
1255 | rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); | |
1256 | rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); | |
1257 | ||
1258 | rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); | |
1259 | rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); | |
1260 | rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); | |
1261 | rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); | |
1262 | ||
1263 | rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); | |
1264 | rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); | |
1265 | rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); | |
1266 | ||
1267 | return 0; | |
1268 | } | |
1269 | ||
a7f3a06c ID |
1270 | /* |
1271 | * Initialization functions. | |
1272 | */ | |
798b7adb | 1273 | static bool rt61pci_get_entry_state(struct queue_entry *entry) |
95ea3627 | 1274 | { |
b8be63ff | 1275 | struct queue_entry_priv_pci *entry_priv = entry->priv_data; |
95ea3627 ID |
1276 | u32 word; |
1277 | ||
798b7adb ID |
1278 | if (entry->queue->qid == QID_RX) { |
1279 | rt2x00_desc_read(entry_priv->desc, 0, &word); | |
95ea3627 | 1280 | |
798b7adb ID |
1281 | return rt2x00_get_field32(word, RXD_W0_OWNER_NIC); |
1282 | } else { | |
1283 | rt2x00_desc_read(entry_priv->desc, 0, &word); | |
1284 | ||
1285 | return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || | |
1286 | rt2x00_get_field32(word, TXD_W0_VALID)); | |
1287 | } | |
95ea3627 ID |
1288 | } |
1289 | ||
798b7adb | 1290 | static void rt61pci_clear_entry(struct queue_entry *entry) |
95ea3627 | 1291 | { |
b8be63ff | 1292 | struct queue_entry_priv_pci *entry_priv = entry->priv_data; |
798b7adb | 1293 | struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); |
95ea3627 ID |
1294 | u32 word; |
1295 | ||
798b7adb ID |
1296 | if (entry->queue->qid == QID_RX) { |
1297 | rt2x00_desc_read(entry_priv->desc, 5, &word); | |
1298 | rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, | |
1299 | skbdesc->skb_dma); | |
1300 | rt2x00_desc_write(entry_priv->desc, 5, word); | |
1301 | ||
1302 | rt2x00_desc_read(entry_priv->desc, 0, &word); | |
1303 | rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); | |
1304 | rt2x00_desc_write(entry_priv->desc, 0, word); | |
1305 | } else { | |
1306 | rt2x00_desc_read(entry_priv->desc, 0, &word); | |
1307 | rt2x00_set_field32(&word, TXD_W0_VALID, 0); | |
1308 | rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); | |
1309 | rt2x00_desc_write(entry_priv->desc, 0, word); | |
1310 | } | |
95ea3627 ID |
1311 | } |
1312 | ||
181d6902 | 1313 | static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev) |
95ea3627 | 1314 | { |
b8be63ff | 1315 | struct queue_entry_priv_pci *entry_priv; |
95ea3627 ID |
1316 | u32 reg; |
1317 | ||
95ea3627 ID |
1318 | /* |
1319 | * Initialize registers. | |
1320 | */ | |
1321 | rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, ®); | |
1322 | rt2x00_set_field32(®, TX_RING_CSR0_AC0_RING_SIZE, | |
181d6902 | 1323 | rt2x00dev->tx[0].limit); |
95ea3627 | 1324 | rt2x00_set_field32(®, TX_RING_CSR0_AC1_RING_SIZE, |
181d6902 | 1325 | rt2x00dev->tx[1].limit); |
95ea3627 | 1326 | rt2x00_set_field32(®, TX_RING_CSR0_AC2_RING_SIZE, |
181d6902 | 1327 | rt2x00dev->tx[2].limit); |
95ea3627 | 1328 | rt2x00_set_field32(®, TX_RING_CSR0_AC3_RING_SIZE, |
181d6902 | 1329 | rt2x00dev->tx[3].limit); |
95ea3627 ID |
1330 | rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg); |
1331 | ||
1332 | rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, ®); | |
95ea3627 | 1333 | rt2x00_set_field32(®, TX_RING_CSR1_TXD_SIZE, |
181d6902 | 1334 | rt2x00dev->tx[0].desc_size / 4); |
95ea3627 ID |
1335 | rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg); |
1336 | ||
b8be63ff | 1337 | entry_priv = rt2x00dev->tx[0].entries[0].priv_data; |
95ea3627 | 1338 | rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, ®); |
30b3a23c | 1339 | rt2x00_set_field32(®, AC0_BASE_CSR_RING_REGISTER, |
b8be63ff | 1340 | entry_priv->desc_dma); |
95ea3627 ID |
1341 | rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg); |
1342 | ||
b8be63ff | 1343 | entry_priv = rt2x00dev->tx[1].entries[0].priv_data; |
95ea3627 | 1344 | rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, ®); |
30b3a23c | 1345 | rt2x00_set_field32(®, AC1_BASE_CSR_RING_REGISTER, |
b8be63ff | 1346 | entry_priv->desc_dma); |
95ea3627 ID |
1347 | rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg); |
1348 | ||
b8be63ff | 1349 | entry_priv = rt2x00dev->tx[2].entries[0].priv_data; |
95ea3627 | 1350 | rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, ®); |
30b3a23c | 1351 | rt2x00_set_field32(®, AC2_BASE_CSR_RING_REGISTER, |
b8be63ff | 1352 | entry_priv->desc_dma); |
95ea3627 ID |
1353 | rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg); |
1354 | ||
b8be63ff | 1355 | entry_priv = rt2x00dev->tx[3].entries[0].priv_data; |
95ea3627 | 1356 | rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, ®); |
30b3a23c | 1357 | rt2x00_set_field32(®, AC3_BASE_CSR_RING_REGISTER, |
b8be63ff | 1358 | entry_priv->desc_dma); |
95ea3627 ID |
1359 | rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg); |
1360 | ||
95ea3627 | 1361 | rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, ®); |
181d6902 | 1362 | rt2x00_set_field32(®, RX_RING_CSR_RING_SIZE, rt2x00dev->rx->limit); |
95ea3627 ID |
1363 | rt2x00_set_field32(®, RX_RING_CSR_RXD_SIZE, |
1364 | rt2x00dev->rx->desc_size / 4); | |
1365 | rt2x00_set_field32(®, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4); | |
1366 | rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg); | |
1367 | ||
b8be63ff | 1368 | entry_priv = rt2x00dev->rx->entries[0].priv_data; |
95ea3627 | 1369 | rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, ®); |
30b3a23c | 1370 | rt2x00_set_field32(®, RX_BASE_CSR_RING_REGISTER, |
b8be63ff | 1371 | entry_priv->desc_dma); |
95ea3627 ID |
1372 | rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg); |
1373 | ||
1374 | rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, ®); | |
1375 | rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC0, 2); | |
1376 | rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC1, 2); | |
1377 | rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC2, 2); | |
1378 | rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC3, 2); | |
95ea3627 ID |
1379 | rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg); |
1380 | ||
1381 | rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, ®); | |
1382 | rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC0, 1); | |
1383 | rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1); | |
1384 | rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1); | |
1385 | rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1); | |
95ea3627 ID |
1386 | rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg); |
1387 | ||
1388 | rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, ®); | |
1389 | rt2x00_set_field32(®, RX_CNTL_CSR_LOAD_RXD, 1); | |
1390 | rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg); | |
1391 | ||
1392 | return 0; | |
1393 | } | |
1394 | ||
1395 | static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) | |
1396 | { | |
1397 | u32 reg; | |
1398 | ||
1399 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); | |
1400 | rt2x00_set_field32(®, TXRX_CSR0_AUTO_TX_SEQ, 1); | |
1401 | rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0); | |
1402 | rt2x00_set_field32(®, TXRX_CSR0_TX_WITHOUT_WAITING, 0); | |
1403 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); | |
1404 | ||
1405 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR1, ®); | |
1406 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */ | |
1407 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0_VALID, 1); | |
1408 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1, 30); /* Rssi */ | |
1409 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1_VALID, 1); | |
1410 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */ | |
1411 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2_VALID, 1); | |
1412 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3, 30); /* Rssi */ | |
1413 | rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3_VALID, 1); | |
1414 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR1, reg); | |
1415 | ||
1416 | /* | |
1417 | * CCK TXD BBP registers | |
1418 | */ | |
1419 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR2, ®); | |
1420 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0, 13); | |
1421 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0_VALID, 1); | |
1422 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1, 12); | |
1423 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1_VALID, 1); | |
1424 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2, 11); | |
1425 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2_VALID, 1); | |
1426 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3, 10); | |
1427 | rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3_VALID, 1); | |
1428 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR2, reg); | |
1429 | ||
1430 | /* | |
1431 | * OFDM TXD BBP registers | |
1432 | */ | |
1433 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR3, ®); | |
1434 | rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0, 7); | |
1435 | rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0_VALID, 1); | |
1436 | rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1, 6); | |
1437 | rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1_VALID, 1); | |
1438 | rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2, 5); | |
1439 | rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2_VALID, 1); | |
1440 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR3, reg); | |
1441 | ||
1442 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR7, ®); | |
1443 | rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_6MBS, 59); | |
1444 | rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_9MBS, 53); | |
1445 | rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_12MBS, 49); | |
1446 | rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_18MBS, 46); | |
1447 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR7, reg); | |
1448 | ||
1449 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR8, ®); | |
1450 | rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_24MBS, 44); | |
1451 | rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_36MBS, 42); | |
1452 | rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_48MBS, 42); | |
1453 | rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42); | |
1454 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg); | |
1455 | ||
1f909162 ID |
1456 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); |
1457 | rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, 0); | |
1458 | rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); | |
1459 | rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0); | |
1460 | rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); | |
1461 | rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); | |
1462 | rt2x00_set_field32(®, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0); | |
1463 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); | |
1464 | ||
95ea3627 ID |
1465 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); |
1466 | ||
1467 | rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff); | |
1468 | ||
1469 | rt2x00pci_register_read(rt2x00dev, MAC_CSR9, ®); | |
1470 | rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0); | |
1471 | rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg); | |
1472 | ||
1473 | rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x0000071c); | |
1474 | ||
1475 | if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) | |
1476 | return -EBUSY; | |
1477 | ||
1478 | rt2x00pci_register_write(rt2x00dev, MAC_CSR13, 0x0000e000); | |
1479 | ||
1480 | /* | |
1481 | * Invalidate all Shared Keys (SEC_CSR0), | |
1482 | * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5) | |
1483 | */ | |
1484 | rt2x00pci_register_write(rt2x00dev, SEC_CSR0, 0x00000000); | |
1485 | rt2x00pci_register_write(rt2x00dev, SEC_CSR1, 0x00000000); | |
1486 | rt2x00pci_register_write(rt2x00dev, SEC_CSR5, 0x00000000); | |
1487 | ||
1488 | rt2x00pci_register_write(rt2x00dev, PHY_CSR1, 0x000023b0); | |
1489 | rt2x00pci_register_write(rt2x00dev, PHY_CSR5, 0x060a100c); | |
1490 | rt2x00pci_register_write(rt2x00dev, PHY_CSR6, 0x00080606); | |
1491 | rt2x00pci_register_write(rt2x00dev, PHY_CSR7, 0x00000a08); | |
1492 | ||
1493 | rt2x00pci_register_write(rt2x00dev, PCI_CFG_CSR, 0x28ca4404); | |
1494 | ||
1495 | rt2x00pci_register_write(rt2x00dev, TEST_MODE_CSR, 0x00000200); | |
1496 | ||
1497 | rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff); | |
1498 | ||
6bb40dd1 ID |
1499 | /* |
1500 | * Clear all beacons | |
1501 | * For the Beacon base registers we only need to clear | |
1502 | * the first byte since that byte contains the VALID and OWNER | |
1503 | * bits which (when set to 0) will invalidate the entire beacon. | |
1504 | */ | |
1505 | rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0); | |
1506 | rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0); | |
1507 | rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0); | |
1508 | rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0); | |
1509 | ||
95ea3627 ID |
1510 | /* |
1511 | * We must clear the error counters. | |
1512 | * These registers are cleared on read, | |
1513 | * so we may pass a useless variable to store the value. | |
1514 | */ | |
1515 | rt2x00pci_register_read(rt2x00dev, STA_CSR0, ®); | |
1516 | rt2x00pci_register_read(rt2x00dev, STA_CSR1, ®); | |
1517 | rt2x00pci_register_read(rt2x00dev, STA_CSR2, ®); | |
1518 | ||
1519 | /* | |
1520 | * Reset MAC and BBP registers. | |
1521 | */ | |
1522 | rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); | |
1523 | rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); | |
1524 | rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); | |
1525 | rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); | |
1526 | ||
1527 | rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); | |
1528 | rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); | |
1529 | rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); | |
1530 | rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); | |
1531 | ||
1532 | rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); | |
1533 | rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); | |
1534 | rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); | |
1535 | ||
1536 | return 0; | |
1537 | } | |
1538 | ||
2b08da3f | 1539 | static int rt61pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) |
95ea3627 ID |
1540 | { |
1541 | unsigned int i; | |
95ea3627 ID |
1542 | u8 value; |
1543 | ||
1544 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | |
1545 | rt61pci_bbp_read(rt2x00dev, 0, &value); | |
1546 | if ((value != 0xff) && (value != 0x00)) | |
2b08da3f | 1547 | return 0; |
95ea3627 ID |
1548 | udelay(REGISTER_BUSY_DELAY); |
1549 | } | |
1550 | ||
1551 | ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); | |
1552 | return -EACCES; | |
2b08da3f ID |
1553 | } |
1554 | ||
1555 | static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev) | |
1556 | { | |
1557 | unsigned int i; | |
1558 | u16 eeprom; | |
1559 | u8 reg_id; | |
1560 | u8 value; | |
1561 | ||
1562 | if (unlikely(rt61pci_wait_bbp_ready(rt2x00dev))) | |
1563 | return -EACCES; | |
95ea3627 | 1564 | |
95ea3627 ID |
1565 | rt61pci_bbp_write(rt2x00dev, 3, 0x00); |
1566 | rt61pci_bbp_write(rt2x00dev, 15, 0x30); | |
1567 | rt61pci_bbp_write(rt2x00dev, 21, 0xc8); | |
1568 | rt61pci_bbp_write(rt2x00dev, 22, 0x38); | |
1569 | rt61pci_bbp_write(rt2x00dev, 23, 0x06); | |
1570 | rt61pci_bbp_write(rt2x00dev, 24, 0xfe); | |
1571 | rt61pci_bbp_write(rt2x00dev, 25, 0x0a); | |
1572 | rt61pci_bbp_write(rt2x00dev, 26, 0x0d); | |
1573 | rt61pci_bbp_write(rt2x00dev, 34, 0x12); | |
1574 | rt61pci_bbp_write(rt2x00dev, 37, 0x07); | |
1575 | rt61pci_bbp_write(rt2x00dev, 39, 0xf8); | |
1576 | rt61pci_bbp_write(rt2x00dev, 41, 0x60); | |
1577 | rt61pci_bbp_write(rt2x00dev, 53, 0x10); | |
1578 | rt61pci_bbp_write(rt2x00dev, 54, 0x18); | |
1579 | rt61pci_bbp_write(rt2x00dev, 60, 0x10); | |
1580 | rt61pci_bbp_write(rt2x00dev, 61, 0x04); | |
1581 | rt61pci_bbp_write(rt2x00dev, 62, 0x04); | |
1582 | rt61pci_bbp_write(rt2x00dev, 75, 0xfe); | |
1583 | rt61pci_bbp_write(rt2x00dev, 86, 0xfe); | |
1584 | rt61pci_bbp_write(rt2x00dev, 88, 0xfe); | |
1585 | rt61pci_bbp_write(rt2x00dev, 90, 0x0f); | |
1586 | rt61pci_bbp_write(rt2x00dev, 99, 0x00); | |
1587 | rt61pci_bbp_write(rt2x00dev, 102, 0x16); | |
1588 | rt61pci_bbp_write(rt2x00dev, 107, 0x04); | |
1589 | ||
95ea3627 ID |
1590 | for (i = 0; i < EEPROM_BBP_SIZE; i++) { |
1591 | rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); | |
1592 | ||
1593 | if (eeprom != 0xffff && eeprom != 0x0000) { | |
1594 | reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); | |
1595 | value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); | |
95ea3627 ID |
1596 | rt61pci_bbp_write(rt2x00dev, reg_id, value); |
1597 | } | |
1598 | } | |
95ea3627 ID |
1599 | |
1600 | return 0; | |
1601 | } | |
1602 | ||
1603 | /* | |
1604 | * Device state switch handlers. | |
1605 | */ | |
1606 | static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev, | |
1607 | enum dev_state state) | |
1608 | { | |
1609 | u32 reg; | |
1610 | ||
1611 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); | |
1612 | rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, | |
2b08da3f ID |
1613 | (state == STATE_RADIO_RX_OFF) || |
1614 | (state == STATE_RADIO_RX_OFF_LINK)); | |
95ea3627 ID |
1615 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); |
1616 | } | |
1617 | ||
1618 | static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev, | |
1619 | enum dev_state state) | |
1620 | { | |
1621 | int mask = (state == STATE_RADIO_IRQ_OFF); | |
1622 | u32 reg; | |
1623 | ||
1624 | /* | |
1625 | * When interrupts are being enabled, the interrupt registers | |
1626 | * should clear the register to assure a clean state. | |
1627 | */ | |
1628 | if (state == STATE_RADIO_IRQ_ON) { | |
1629 | rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); | |
1630 | rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); | |
1631 | ||
1632 | rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, ®); | |
1633 | rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg); | |
1634 | } | |
1635 | ||
1636 | /* | |
1637 | * Only toggle the interrupts bits we are going to use. | |
1638 | * Non-checked interrupt bits are disabled by default. | |
1639 | */ | |
1640 | rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®); | |
1641 | rt2x00_set_field32(®, INT_MASK_CSR_TXDONE, mask); | |
1642 | rt2x00_set_field32(®, INT_MASK_CSR_RXDONE, mask); | |
1643 | rt2x00_set_field32(®, INT_MASK_CSR_ENABLE_MITIGATION, mask); | |
1644 | rt2x00_set_field32(®, INT_MASK_CSR_MITIGATION_PERIOD, 0xff); | |
1645 | rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg); | |
1646 | ||
1647 | rt2x00pci_register_read(rt2x00dev, MCU_INT_MASK_CSR, ®); | |
1648 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_0, mask); | |
1649 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_1, mask); | |
1650 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_2, mask); | |
1651 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_3, mask); | |
1652 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_4, mask); | |
1653 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_5, mask); | |
1654 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_6, mask); | |
1655 | rt2x00_set_field32(®, MCU_INT_MASK_CSR_7, mask); | |
1656 | rt2x00pci_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg); | |
1657 | } | |
1658 | ||
1659 | static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev) | |
1660 | { | |
1661 | u32 reg; | |
1662 | ||
1663 | /* | |
1664 | * Initialize all registers. | |
1665 | */ | |
2b08da3f ID |
1666 | if (unlikely(rt61pci_init_queues(rt2x00dev) || |
1667 | rt61pci_init_registers(rt2x00dev) || | |
1668 | rt61pci_init_bbp(rt2x00dev))) | |
95ea3627 | 1669 | return -EIO; |
95ea3627 ID |
1670 | |
1671 | /* | |
1672 | * Enable RX. | |
1673 | */ | |
1674 | rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, ®); | |
1675 | rt2x00_set_field32(®, RX_CNTL_CSR_ENABLE_RX_DMA, 1); | |
1676 | rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg); | |
1677 | ||
95ea3627 ID |
1678 | return 0; |
1679 | } | |
1680 | ||
1681 | static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev) | |
1682 | { | |
95ea3627 | 1683 | /* |
a2c9b652 | 1684 | * Disable power |
95ea3627 | 1685 | */ |
a2c9b652 | 1686 | rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818); |
95ea3627 ID |
1687 | } |
1688 | ||
1689 | static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) | |
1690 | { | |
1691 | u32 reg; | |
1692 | unsigned int i; | |
1693 | char put_to_sleep; | |
95ea3627 ID |
1694 | |
1695 | put_to_sleep = (state != STATE_AWAKE); | |
1696 | ||
1697 | rt2x00pci_register_read(rt2x00dev, MAC_CSR12, ®); | |
1698 | rt2x00_set_field32(®, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep); | |
1699 | rt2x00_set_field32(®, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep); | |
1700 | rt2x00pci_register_write(rt2x00dev, MAC_CSR12, reg); | |
1701 | ||
1702 | /* | |
1703 | * Device is not guaranteed to be in the requested state yet. | |
1704 | * We must wait until the register indicates that the | |
1705 | * device has entered the correct state. | |
1706 | */ | |
1707 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | |
1708 | rt2x00pci_register_read(rt2x00dev, MAC_CSR12, ®); | |
2b08da3f ID |
1709 | state = rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); |
1710 | if (state == !put_to_sleep) | |
95ea3627 ID |
1711 | return 0; |
1712 | msleep(10); | |
1713 | } | |
1714 | ||
95ea3627 ID |
1715 | return -EBUSY; |
1716 | } | |
1717 | ||
1718 | static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, | |
1719 | enum dev_state state) | |
1720 | { | |
1721 | int retval = 0; | |
1722 | ||
1723 | switch (state) { | |
1724 | case STATE_RADIO_ON: | |
1725 | retval = rt61pci_enable_radio(rt2x00dev); | |
1726 | break; | |
1727 | case STATE_RADIO_OFF: | |
1728 | rt61pci_disable_radio(rt2x00dev); | |
1729 | break; | |
1730 | case STATE_RADIO_RX_ON: | |
61667d8d | 1731 | case STATE_RADIO_RX_ON_LINK: |
95ea3627 | 1732 | case STATE_RADIO_RX_OFF: |
61667d8d | 1733 | case STATE_RADIO_RX_OFF_LINK: |
2b08da3f ID |
1734 | rt61pci_toggle_rx(rt2x00dev, state); |
1735 | break; | |
1736 | case STATE_RADIO_IRQ_ON: | |
1737 | case STATE_RADIO_IRQ_OFF: | |
1738 | rt61pci_toggle_irq(rt2x00dev, state); | |
95ea3627 ID |
1739 | break; |
1740 | case STATE_DEEP_SLEEP: | |
1741 | case STATE_SLEEP: | |
1742 | case STATE_STANDBY: | |
1743 | case STATE_AWAKE: | |
1744 | retval = rt61pci_set_state(rt2x00dev, state); | |
1745 | break; | |
1746 | default: | |
1747 | retval = -ENOTSUPP; | |
1748 | break; | |
1749 | } | |
1750 | ||
2b08da3f ID |
1751 | if (unlikely(retval)) |
1752 | ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n", | |
1753 | state, retval); | |
1754 | ||
95ea3627 ID |
1755 | return retval; |
1756 | } | |
1757 | ||
1758 | /* | |
1759 | * TX descriptor initialization | |
1760 | */ | |
1761 | static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, | |
61e754f4 ID |
1762 | struct sk_buff *skb, |
1763 | struct txentry_desc *txdesc) | |
95ea3627 | 1764 | { |
181d6902 | 1765 | struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); |
dd3193e1 | 1766 | __le32 *txd = skbdesc->desc; |
95ea3627 ID |
1767 | u32 word; |
1768 | ||
1769 | /* | |
1770 | * Start writing the descriptor words. | |
1771 | */ | |
1772 | rt2x00_desc_read(txd, 1, &word); | |
181d6902 ID |
1773 | rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue); |
1774 | rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs); | |
1775 | rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); | |
1776 | rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); | |
61e754f4 | 1777 | rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset); |
5adf6d63 ID |
1778 | rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, |
1779 | test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); | |
4de36fe5 | 1780 | rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); |
95ea3627 ID |
1781 | rt2x00_desc_write(txd, 1, word); |
1782 | ||
1783 | rt2x00_desc_read(txd, 2, &word); | |
181d6902 ID |
1784 | rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal); |
1785 | rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service); | |
1786 | rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low); | |
1787 | rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high); | |
95ea3627 ID |
1788 | rt2x00_desc_write(txd, 2, word); |
1789 | ||
61e754f4 | 1790 | if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) { |
1ce9cdac ID |
1791 | _rt2x00_desc_write(txd, 3, skbdesc->iv[0]); |
1792 | _rt2x00_desc_write(txd, 4, skbdesc->iv[1]); | |
61e754f4 ID |
1793 | } |
1794 | ||
95ea3627 | 1795 | rt2x00_desc_read(txd, 5, &word); |
4de36fe5 GW |
1796 | rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid); |
1797 | rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, | |
1798 | skbdesc->entry->entry_idx); | |
95ea3627 | 1799 | rt2x00_set_field32(&word, TXD_W5_TX_POWER, |
ac1aa7e4 | 1800 | TXPOWER_TO_DEV(rt2x00dev->tx_power)); |
95ea3627 ID |
1801 | rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); |
1802 | rt2x00_desc_write(txd, 5, word); | |
1803 | ||
4de36fe5 GW |
1804 | rt2x00_desc_read(txd, 6, &word); |
1805 | rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, | |
c4da0048 | 1806 | skbdesc->skb_dma); |
4de36fe5 GW |
1807 | rt2x00_desc_write(txd, 6, word); |
1808 | ||
d7bafff3 AB |
1809 | if (skbdesc->desc_len > TXINFO_SIZE) { |
1810 | rt2x00_desc_read(txd, 11, &word); | |
d56d453a | 1811 | rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skb->len); |
d7bafff3 AB |
1812 | rt2x00_desc_write(txd, 11, word); |
1813 | } | |
95ea3627 ID |
1814 | |
1815 | rt2x00_desc_read(txd, 0, &word); | |
1816 | rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); | |
1817 | rt2x00_set_field32(&word, TXD_W0_VALID, 1); | |
1818 | rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, | |
181d6902 | 1819 | test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); |
95ea3627 | 1820 | rt2x00_set_field32(&word, TXD_W0_ACK, |
181d6902 | 1821 | test_bit(ENTRY_TXD_ACK, &txdesc->flags)); |
95ea3627 | 1822 | rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, |
181d6902 | 1823 | test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); |
95ea3627 | 1824 | rt2x00_set_field32(&word, TXD_W0_OFDM, |
076f9582 | 1825 | (txdesc->rate_mode == RATE_MODE_OFDM)); |
181d6902 | 1826 | rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); |
95ea3627 | 1827 | rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, |
61486e0f | 1828 | test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); |
61e754f4 ID |
1829 | rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, |
1830 | test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags)); | |
1831 | rt2x00_set_field32(&word, TXD_W0_KEY_TABLE, | |
1832 | test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags)); | |
1833 | rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx); | |
d56d453a | 1834 | rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); |
95ea3627 | 1835 | rt2x00_set_field32(&word, TXD_W0_BURST, |
181d6902 | 1836 | test_bit(ENTRY_TXD_BURST, &txdesc->flags)); |
61e754f4 | 1837 | rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher); |
95ea3627 ID |
1838 | rt2x00_desc_write(txd, 0, word); |
1839 | } | |
1840 | ||
1841 | /* | |
1842 | * TX data initialization | |
1843 | */ | |
bd88a781 ID |
1844 | static void rt61pci_write_beacon(struct queue_entry *entry) |
1845 | { | |
1846 | struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; | |
1847 | struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); | |
1848 | unsigned int beacon_base; | |
1849 | u32 reg; | |
1850 | ||
1851 | /* | |
1852 | * Disable beaconing while we are reloading the beacon data, | |
1853 | * otherwise we might be sending out invalid data. | |
1854 | */ | |
1855 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); | |
bd88a781 ID |
1856 | rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); |
1857 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); | |
1858 | ||
1859 | /* | |
1860 | * Write entire beacon with descriptor to register. | |
1861 | */ | |
1862 | beacon_base = HW_BEACON_OFFSET(entry->entry_idx); | |
1863 | rt2x00pci_register_multiwrite(rt2x00dev, | |
1864 | beacon_base, | |
1865 | skbdesc->desc, skbdesc->desc_len); | |
1866 | rt2x00pci_register_multiwrite(rt2x00dev, | |
1867 | beacon_base + skbdesc->desc_len, | |
1868 | entry->skb->data, entry->skb->len); | |
1869 | ||
1870 | /* | |
1871 | * Clean up beacon skb. | |
1872 | */ | |
1873 | dev_kfree_skb_any(entry->skb); | |
1874 | entry->skb = NULL; | |
1875 | } | |
1876 | ||
95ea3627 | 1877 | static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, |
e58c6aca | 1878 | const enum data_queue_qid queue) |
95ea3627 ID |
1879 | { |
1880 | u32 reg; | |
1881 | ||
e58c6aca | 1882 | if (queue == QID_BEACON) { |
95ea3627 ID |
1883 | /* |
1884 | * For Wi-Fi faily generated beacons between participating | |
1885 | * stations. Set TBTT phase adaptive adjustment step to 8us. | |
1886 | */ | |
1887 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR10, 0x00001008); | |
1888 | ||
1889 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); | |
1890 | if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) { | |
8af244cc ID |
1891 | rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); |
1892 | rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); | |
95ea3627 ID |
1893 | rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); |
1894 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); | |
1895 | } | |
1896 | return; | |
1897 | } | |
1898 | ||
1899 | rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); | |
e58c6aca ID |
1900 | rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, (queue == QID_AC_BE)); |
1901 | rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, (queue == QID_AC_BK)); | |
1902 | rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, (queue == QID_AC_VI)); | |
1903 | rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, (queue == QID_AC_VO)); | |
95ea3627 ID |
1904 | rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); |
1905 | } | |
1906 | ||
a2c9b652 ID |
1907 | static void rt61pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, |
1908 | const enum data_queue_qid qid) | |
1909 | { | |
1910 | u32 reg; | |
1911 | ||
1912 | if (qid == QID_BEACON) { | |
1913 | rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); | |
1914 | return; | |
1915 | } | |
1916 | ||
1917 | rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); | |
1918 | rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC0, (qid == QID_AC_BE)); | |
1919 | rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC1, (qid == QID_AC_BK)); | |
1920 | rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, (qid == QID_AC_VI)); | |
1921 | rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, (qid == QID_AC_VO)); | |
1922 | rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); | |
1923 | } | |
1924 | ||
95ea3627 ID |
1925 | /* |
1926 | * RX control handlers | |
1927 | */ | |
1928 | static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) | |
1929 | { | |
ba2ab471 | 1930 | u8 offset = rt2x00dev->lna_gain; |
95ea3627 ID |
1931 | u8 lna; |
1932 | ||
1933 | lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA); | |
1934 | switch (lna) { | |
1935 | case 3: | |
ba2ab471 | 1936 | offset += 90; |
95ea3627 ID |
1937 | break; |
1938 | case 2: | |
ba2ab471 | 1939 | offset += 74; |
95ea3627 ID |
1940 | break; |
1941 | case 1: | |
ba2ab471 | 1942 | offset += 64; |
95ea3627 ID |
1943 | break; |
1944 | default: | |
1945 | return 0; | |
1946 | } | |
1947 | ||
8318d78a | 1948 | if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { |
95ea3627 ID |
1949 | if (lna == 3 || lna == 2) |
1950 | offset += 10; | |
95ea3627 ID |
1951 | } |
1952 | ||
1953 | return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; | |
1954 | } | |
1955 | ||
181d6902 | 1956 | static void rt61pci_fill_rxdone(struct queue_entry *entry, |
55887511 | 1957 | struct rxdone_entry_desc *rxdesc) |
95ea3627 | 1958 | { |
61e754f4 | 1959 | struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; |
b8be63ff | 1960 | struct queue_entry_priv_pci *entry_priv = entry->priv_data; |
95ea3627 ID |
1961 | u32 word0; |
1962 | u32 word1; | |
1963 | ||
b8be63ff ID |
1964 | rt2x00_desc_read(entry_priv->desc, 0, &word0); |
1965 | rt2x00_desc_read(entry_priv->desc, 1, &word1); | |
95ea3627 | 1966 | |
4150c572 | 1967 | if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) |
181d6902 | 1968 | rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; |
95ea3627 | 1969 | |
61e754f4 ID |
1970 | if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { |
1971 | rxdesc->cipher = | |
1972 | rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG); | |
1973 | rxdesc->cipher_status = | |
1974 | rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR); | |
1975 | } | |
1976 | ||
1977 | if (rxdesc->cipher != CIPHER_NONE) { | |
1ce9cdac ID |
1978 | _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv[0]); |
1979 | _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->iv[1]); | |
74415edb ID |
1980 | rxdesc->dev_flags |= RXDONE_CRYPTO_IV; |
1981 | ||
61e754f4 | 1982 | _rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv); |
74415edb | 1983 | rxdesc->dev_flags |= RXDONE_CRYPTO_ICV; |
61e754f4 ID |
1984 | |
1985 | /* | |
1986 | * Hardware has stripped IV/EIV data from 802.11 frame during | |
b34e620f | 1987 | * decryption. It has provided the data separately but rt2x00lib |
61e754f4 ID |
1988 | * should decide if it should be reinserted. |
1989 | */ | |
1990 | rxdesc->flags |= RX_FLAG_IV_STRIPPED; | |
1991 | ||
1992 | /* | |
1993 | * FIXME: Legacy driver indicates that the frame does | |
1994 | * contain the Michael Mic. Unfortunately, in rt2x00 | |
1995 | * the MIC seems to be missing completely... | |
1996 | */ | |
1997 | rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; | |
1998 | ||
1999 | if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) | |
2000 | rxdesc->flags |= RX_FLAG_DECRYPTED; | |
2001 | else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) | |
2002 | rxdesc->flags |= RX_FLAG_MMIC_ERROR; | |
2003 | } | |
2004 | ||
95ea3627 ID |
2005 | /* |
2006 | * Obtain the status about this packet. | |
89993890 ID |
2007 | * When frame was received with an OFDM bitrate, |
2008 | * the signal is the PLCP value. If it was received with | |
2009 | * a CCK bitrate the signal is the rate in 100kbit/s. | |
95ea3627 | 2010 | */ |
181d6902 | 2011 | rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); |
61e754f4 | 2012 | rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1); |
181d6902 | 2013 | rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); |
19d30e02 | 2014 | |
19d30e02 ID |
2015 | if (rt2x00_get_field32(word0, RXD_W0_OFDM)) |
2016 | rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; | |
6c6aa3c0 ID |
2017 | else |
2018 | rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; | |
19d30e02 ID |
2019 | if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) |
2020 | rxdesc->dev_flags |= RXDONE_MY_BSS; | |
95ea3627 ID |
2021 | } |
2022 | ||
2023 | /* | |
2024 | * Interrupt functions. | |
2025 | */ | |
2026 | static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) | |
2027 | { | |
181d6902 ID |
2028 | struct data_queue *queue; |
2029 | struct queue_entry *entry; | |
2030 | struct queue_entry *entry_done; | |
b8be63ff | 2031 | struct queue_entry_priv_pci *entry_priv; |
181d6902 | 2032 | struct txdone_entry_desc txdesc; |
95ea3627 ID |
2033 | u32 word; |
2034 | u32 reg; | |
2035 | u32 old_reg; | |
2036 | int type; | |
2037 | int index; | |
95ea3627 ID |
2038 | |
2039 | /* | |
2040 | * During each loop we will compare the freshly read | |
2041 | * STA_CSR4 register value with the value read from | |
2042 | * the previous loop. If the 2 values are equal then | |
b34e620f | 2043 | * we should stop processing because the chance is |
95ea3627 ID |
2044 | * quite big that the device has been unplugged and |
2045 | * we risk going into an endless loop. | |
2046 | */ | |
2047 | old_reg = 0; | |
2048 | ||
2049 | while (1) { | |
2050 | rt2x00pci_register_read(rt2x00dev, STA_CSR4, ®); | |
2051 | if (!rt2x00_get_field32(reg, STA_CSR4_VALID)) | |
2052 | break; | |
2053 | ||
2054 | if (old_reg == reg) | |
2055 | break; | |
2056 | old_reg = reg; | |
2057 | ||
2058 | /* | |
2059 | * Skip this entry when it contains an invalid | |
181d6902 | 2060 | * queue identication number. |
95ea3627 ID |
2061 | */ |
2062 | type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE); | |
181d6902 ID |
2063 | queue = rt2x00queue_get_queue(rt2x00dev, type); |
2064 | if (unlikely(!queue)) | |
95ea3627 ID |
2065 | continue; |
2066 | ||
2067 | /* | |
2068 | * Skip this entry when it contains an invalid | |
2069 | * index number. | |
2070 | */ | |
2071 | index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE); | |
181d6902 | 2072 | if (unlikely(index >= queue->limit)) |
95ea3627 ID |
2073 | continue; |
2074 | ||
181d6902 | 2075 | entry = &queue->entries[index]; |
b8be63ff ID |
2076 | entry_priv = entry->priv_data; |
2077 | rt2x00_desc_read(entry_priv->desc, 0, &word); | |
95ea3627 ID |
2078 | |
2079 | if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || | |
2080 | !rt2x00_get_field32(word, TXD_W0_VALID)) | |
2081 | return; | |
2082 | ||
181d6902 | 2083 | entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); |
62bc060b | 2084 | while (entry != entry_done) { |
181d6902 ID |
2085 | /* Catch up. |
2086 | * Just report any entries we missed as failed. | |
2087 | */ | |
62bc060b | 2088 | WARNING(rt2x00dev, |
181d6902 ID |
2089 | "TX status report missed for entry %d\n", |
2090 | entry_done->entry_idx); | |
2091 | ||
fb55f4d1 ID |
2092 | txdesc.flags = 0; |
2093 | __set_bit(TXDONE_UNKNOWN, &txdesc.flags); | |
181d6902 ID |
2094 | txdesc.retry = 0; |
2095 | ||
d74f5ba4 | 2096 | rt2x00lib_txdone(entry_done, &txdesc); |
181d6902 | 2097 | entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); |
62bc060b MN |
2098 | } |
2099 | ||
95ea3627 ID |
2100 | /* |
2101 | * Obtain the status about this packet. | |
2102 | */ | |
fb55f4d1 ID |
2103 | txdesc.flags = 0; |
2104 | switch (rt2x00_get_field32(reg, STA_CSR4_TX_RESULT)) { | |
2105 | case 0: /* Success, maybe with retry */ | |
2106 | __set_bit(TXDONE_SUCCESS, &txdesc.flags); | |
2107 | break; | |
2108 | case 6: /* Failure, excessive retries */ | |
2109 | __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags); | |
2110 | /* Don't break, this is a failed frame! */ | |
2111 | default: /* Failure */ | |
2112 | __set_bit(TXDONE_FAILURE, &txdesc.flags); | |
2113 | } | |
181d6902 | 2114 | txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT); |
95ea3627 | 2115 | |
d74f5ba4 | 2116 | rt2x00lib_txdone(entry, &txdesc); |
95ea3627 ID |
2117 | } |
2118 | } | |
2119 | ||
2120 | static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance) | |
2121 | { | |
2122 | struct rt2x00_dev *rt2x00dev = dev_instance; | |
2123 | u32 reg_mcu; | |
2124 | u32 reg; | |
2125 | ||
2126 | /* | |
2127 | * Get the interrupt sources & saved to local variable. | |
2128 | * Write register value back to clear pending interrupts. | |
2129 | */ | |
2130 | rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, ®_mcu); | |
2131 | rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu); | |
2132 | ||
2133 | rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); | |
2134 | rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); | |
2135 | ||
2136 | if (!reg && !reg_mcu) | |
2137 | return IRQ_NONE; | |
2138 | ||
0262ab0d | 2139 | if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) |
95ea3627 ID |
2140 | return IRQ_HANDLED; |
2141 | ||
2142 | /* | |
2143 | * Handle interrupts, walk through all bits | |
2144 | * and run the tasks, the bits are checked in order of | |
2145 | * priority. | |
2146 | */ | |
2147 | ||
2148 | /* | |
2149 | * 1 - Rx ring done interrupt. | |
2150 | */ | |
2151 | if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RXDONE)) | |
2152 | rt2x00pci_rxdone(rt2x00dev); | |
2153 | ||
2154 | /* | |
2155 | * 2 - Tx ring done interrupt. | |
2156 | */ | |
2157 | if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TXDONE)) | |
2158 | rt61pci_txdone(rt2x00dev); | |
2159 | ||
2160 | /* | |
2161 | * 3 - Handle MCU command done. | |
2162 | */ | |
2163 | if (reg_mcu) | |
2164 | rt2x00pci_register_write(rt2x00dev, | |
2165 | M2H_CMD_DONE_CSR, 0xffffffff); | |
2166 | ||
2167 | return IRQ_HANDLED; | |
2168 | } | |
2169 | ||
2170 | /* | |
2171 | * Device probe functions. | |
2172 | */ | |
2173 | static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) | |
2174 | { | |
2175 | struct eeprom_93cx6 eeprom; | |
2176 | u32 reg; | |
2177 | u16 word; | |
2178 | u8 *mac; | |
2179 | s8 value; | |
2180 | ||
2181 | rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); | |
2182 | ||
2183 | eeprom.data = rt2x00dev; | |
2184 | eeprom.register_read = rt61pci_eepromregister_read; | |
2185 | eeprom.register_write = rt61pci_eepromregister_write; | |
2186 | eeprom.width = rt2x00_get_field32(reg, E2PROM_CSR_TYPE_93C46) ? | |
2187 | PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; | |
2188 | eeprom.reg_data_in = 0; | |
2189 | eeprom.reg_data_out = 0; | |
2190 | eeprom.reg_data_clock = 0; | |
2191 | eeprom.reg_chip_select = 0; | |
2192 | ||
2193 | eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, | |
2194 | EEPROM_SIZE / sizeof(u16)); | |
2195 | ||
2196 | /* | |
2197 | * Start validation of the data that has been read. | |
2198 | */ | |
2199 | mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); | |
2200 | if (!is_valid_ether_addr(mac)) { | |
2201 | random_ether_addr(mac); | |
e174961c | 2202 | EEPROM(rt2x00dev, "MAC: %pM\n", mac); |
95ea3627 ID |
2203 | } |
2204 | ||
2205 | rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); | |
2206 | if (word == 0xffff) { | |
2207 | rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); | |
362f3b6b ID |
2208 | rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, |
2209 | ANTENNA_B); | |
2210 | rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, | |
2211 | ANTENNA_B); | |
95ea3627 ID |
2212 | rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0); |
2213 | rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); | |
2214 | rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); | |
2215 | rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5225); | |
2216 | rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); | |
2217 | EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); | |
2218 | } | |
2219 | ||
2220 | rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); | |
2221 | if (word == 0xffff) { | |
2222 | rt2x00_set_field16(&word, EEPROM_NIC_ENABLE_DIVERSITY, 0); | |
2223 | rt2x00_set_field16(&word, EEPROM_NIC_TX_DIVERSITY, 0); | |
91581b62 ID |
2224 | rt2x00_set_field16(&word, EEPROM_NIC_RX_FIXED, 0); |
2225 | rt2x00_set_field16(&word, EEPROM_NIC_TX_FIXED, 0); | |
95ea3627 ID |
2226 | rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); |
2227 | rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); | |
2228 | rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); | |
2229 | rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); | |
2230 | EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); | |
2231 | } | |
2232 | ||
2233 | rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word); | |
2234 | if (word == 0xffff) { | |
2235 | rt2x00_set_field16(&word, EEPROM_LED_LED_MODE, | |
2236 | LED_MODE_DEFAULT); | |
2237 | rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word); | |
2238 | EEPROM(rt2x00dev, "Led: 0x%04x\n", word); | |
2239 | } | |
2240 | ||
2241 | rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); | |
2242 | if (word == 0xffff) { | |
2243 | rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); | |
2244 | rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0); | |
2245 | rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); | |
2246 | EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); | |
2247 | } | |
2248 | ||
2249 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word); | |
2250 | if (word == 0xffff) { | |
2251 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); | |
2252 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); | |
2253 | rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); | |
2254 | EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); | |
2255 | } else { | |
2256 | value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1); | |
2257 | if (value < -10 || value > 10) | |
2258 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); | |
2259 | value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2); | |
2260 | if (value < -10 || value > 10) | |
2261 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); | |
2262 | rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); | |
2263 | } | |
2264 | ||
2265 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word); | |
2266 | if (word == 0xffff) { | |
2267 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); | |
2268 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); | |
2269 | rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); | |
417f412f | 2270 | EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word); |
95ea3627 ID |
2271 | } else { |
2272 | value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1); | |
2273 | if (value < -10 || value > 10) | |
2274 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); | |
2275 | value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2); | |
2276 | if (value < -10 || value > 10) | |
2277 | rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); | |
2278 | rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); | |
2279 | } | |
2280 | ||
2281 | return 0; | |
2282 | } | |
2283 | ||
2284 | static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) | |
2285 | { | |
2286 | u32 reg; | |
2287 | u16 value; | |
2288 | u16 eeprom; | |
95ea3627 ID |
2289 | |
2290 | /* | |
2291 | * Read EEPROM word for configuration. | |
2292 | */ | |
2293 | rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); | |
2294 | ||
2295 | /* | |
2296 | * Identify RF chipset. | |
95ea3627 | 2297 | */ |
95ea3627 ID |
2298 | value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); |
2299 | rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); | |
49e721ec GW |
2300 | rt2x00_set_chip(rt2x00dev, rt2x00_get_field32(reg, MAC_CSR0_CHIPSET), |
2301 | value, rt2x00_get_field32(reg, MAC_CSR0_REVISION)); | |
95ea3627 | 2302 | |
5122d898 GW |
2303 | if (!rt2x00_rf(rt2x00dev, RF5225) && |
2304 | !rt2x00_rf(rt2x00dev, RF5325) && | |
2305 | !rt2x00_rf(rt2x00dev, RF2527) && | |
2306 | !rt2x00_rf(rt2x00dev, RF2529)) { | |
95ea3627 ID |
2307 | ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); |
2308 | return -ENODEV; | |
2309 | } | |
2310 | ||
e4cd2ff8 | 2311 | /* |
49513481 | 2312 | * Determine number of antennas. |
e4cd2ff8 ID |
2313 | */ |
2314 | if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2) | |
2315 | __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags); | |
2316 | ||
95ea3627 ID |
2317 | /* |
2318 | * Identify default antenna configuration. | |
2319 | */ | |
addc81bd | 2320 | rt2x00dev->default_ant.tx = |
95ea3627 | 2321 | rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); |
addc81bd | 2322 | rt2x00dev->default_ant.rx = |
95ea3627 ID |
2323 | rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); |
2324 | ||
2325 | /* | |
2326 | * Read the Frame type. | |
2327 | */ | |
2328 | if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE)) | |
2329 | __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags); | |
2330 | ||
95ea3627 | 2331 | /* |
b34e620f | 2332 | * Detect if this device has a hardware controlled radio. |
95ea3627 ID |
2333 | */ |
2334 | if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) | |
066cb637 | 2335 | __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); |
95ea3627 ID |
2336 | |
2337 | /* | |
2338 | * Read frequency offset and RF programming sequence. | |
2339 | */ | |
2340 | rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); | |
2341 | if (rt2x00_get_field16(eeprom, EEPROM_FREQ_SEQ)) | |
2342 | __set_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags); | |
2343 | ||
2344 | rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); | |
2345 | ||
2346 | /* | |
2347 | * Read external LNA informations. | |
2348 | */ | |
2349 | rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); | |
2350 | ||
2351 | if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) | |
2352 | __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); | |
2353 | if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) | |
2354 | __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); | |
2355 | ||
e4cd2ff8 | 2356 | /* |
b34e620f | 2357 | * When working with a RF2529 chip without double antenna, |
e4cd2ff8 ID |
2358 | * the antenna settings should be gathered from the NIC |
2359 | * eeprom word. | |
2360 | */ | |
5122d898 | 2361 | if (rt2x00_rf(rt2x00dev, RF2529) && |
e4cd2ff8 | 2362 | !test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) { |
91581b62 ID |
2363 | rt2x00dev->default_ant.rx = |
2364 | ANTENNA_A + rt2x00_get_field16(eeprom, EEPROM_NIC_RX_FIXED); | |
2365 | rt2x00dev->default_ant.tx = | |
2366 | ANTENNA_B - rt2x00_get_field16(eeprom, EEPROM_NIC_TX_FIXED); | |
e4cd2ff8 ID |
2367 | |
2368 | if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) | |
2369 | rt2x00dev->default_ant.tx = ANTENNA_SW_DIVERSITY; | |
2370 | if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY)) | |
2371 | rt2x00dev->default_ant.rx = ANTENNA_SW_DIVERSITY; | |
2372 | } | |
2373 | ||
95ea3627 ID |
2374 | /* |
2375 | * Store led settings, for correct led behaviour. | |
2376 | * If the eeprom value is invalid, | |
2377 | * switch to default led mode. | |
2378 | */ | |
771fd565 | 2379 | #ifdef CONFIG_RT2X00_LIB_LEDS |
95ea3627 | 2380 | rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); |
a9450b70 ID |
2381 | value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE); |
2382 | ||
475433be ID |
2383 | rt61pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); |
2384 | rt61pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); | |
2385 | if (value == LED_MODE_SIGNAL_STRENGTH) | |
2386 | rt61pci_init_led(rt2x00dev, &rt2x00dev->led_qual, | |
2387 | LED_TYPE_QUALITY); | |
95ea3627 | 2388 | |
a9450b70 ID |
2389 | rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value); |
2390 | rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0, | |
95ea3627 ID |
2391 | rt2x00_get_field16(eeprom, |
2392 | EEPROM_LED_POLARITY_GPIO_0)); | |
a9450b70 | 2393 | rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1, |
95ea3627 ID |
2394 | rt2x00_get_field16(eeprom, |
2395 | EEPROM_LED_POLARITY_GPIO_1)); | |
a9450b70 | 2396 | rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2, |
95ea3627 ID |
2397 | rt2x00_get_field16(eeprom, |
2398 | EEPROM_LED_POLARITY_GPIO_2)); | |
a9450b70 | 2399 | rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3, |
95ea3627 ID |
2400 | rt2x00_get_field16(eeprom, |
2401 | EEPROM_LED_POLARITY_GPIO_3)); | |
a9450b70 | 2402 | rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4, |
95ea3627 ID |
2403 | rt2x00_get_field16(eeprom, |
2404 | EEPROM_LED_POLARITY_GPIO_4)); | |
a9450b70 | 2405 | rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT, |
95ea3627 | 2406 | rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT)); |
a9450b70 | 2407 | rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG, |
95ea3627 ID |
2408 | rt2x00_get_field16(eeprom, |
2409 | EEPROM_LED_POLARITY_RDY_G)); | |
a9450b70 | 2410 | rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A, |
95ea3627 ID |
2411 | rt2x00_get_field16(eeprom, |
2412 | EEPROM_LED_POLARITY_RDY_A)); | |
771fd565 | 2413 | #endif /* CONFIG_RT2X00_LIB_LEDS */ |
95ea3627 ID |
2414 | |
2415 | return 0; | |
2416 | } | |
2417 | ||
2418 | /* | |
2419 | * RF value list for RF5225 & RF5325 | |
2420 | * Supports: 2.4 GHz & 5.2 GHz, rf_sequence disabled | |
2421 | */ | |
2422 | static const struct rf_channel rf_vals_noseq[] = { | |
2423 | { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b }, | |
2424 | { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f }, | |
2425 | { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b }, | |
2426 | { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f }, | |
2427 | { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b }, | |
2428 | { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f }, | |
2429 | { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b }, | |
2430 | { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f }, | |
2431 | { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b }, | |
2432 | { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f }, | |
2433 | { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b }, | |
2434 | { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f }, | |
2435 | { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b }, | |
2436 | { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 }, | |
2437 | ||
2438 | /* 802.11 UNI / HyperLan 2 */ | |
2439 | { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 }, | |
2440 | { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 }, | |
2441 | { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b }, | |
2442 | { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 }, | |
2443 | { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b }, | |
2444 | { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 }, | |
2445 | { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 }, | |
2446 | { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b }, | |
2447 | ||
2448 | /* 802.11 HyperLan 2 */ | |
2449 | { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 }, | |
2450 | { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b }, | |
2451 | { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 }, | |
2452 | { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b }, | |
2453 | { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 }, | |
2454 | { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 }, | |
2455 | { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b }, | |
2456 | { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 }, | |
2457 | { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b }, | |
2458 | { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 }, | |
2459 | ||
2460 | /* 802.11 UNII */ | |
2461 | { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 }, | |
2462 | { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f }, | |
2463 | { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 }, | |
2464 | { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 }, | |
2465 | { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f }, | |
2466 | { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 }, | |
2467 | ||
2468 | /* MMAC(Japan)J52 ch 34,38,42,46 */ | |
2469 | { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b }, | |
2470 | { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 }, | |
2471 | { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b }, | |
2472 | { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 }, | |
2473 | }; | |
2474 | ||
2475 | /* | |
2476 | * RF value list for RF5225 & RF5325 | |
2477 | * Supports: 2.4 GHz & 5.2 GHz, rf_sequence enabled | |
2478 | */ | |
2479 | static const struct rf_channel rf_vals_seq[] = { | |
2480 | { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b }, | |
2481 | { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f }, | |
2482 | { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b }, | |
2483 | { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f }, | |
2484 | { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b }, | |
2485 | { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f }, | |
2486 | { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b }, | |
2487 | { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f }, | |
2488 | { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b }, | |
2489 | { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f }, | |
2490 | { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b }, | |
2491 | { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f }, | |
2492 | { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b }, | |
2493 | { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 }, | |
2494 | ||
2495 | /* 802.11 UNI / HyperLan 2 */ | |
2496 | { 36, 0x00002cd4, 0x0004481a, 0x00098455, 0x000c0a03 }, | |
2497 | { 40, 0x00002cd0, 0x00044682, 0x00098455, 0x000c0a03 }, | |
2498 | { 44, 0x00002cd0, 0x00044686, 0x00098455, 0x000c0a1b }, | |
2499 | { 48, 0x00002cd0, 0x0004468e, 0x00098655, 0x000c0a0b }, | |
2500 | { 52, 0x00002cd0, 0x00044692, 0x00098855, 0x000c0a23 }, | |
2501 | { 56, 0x00002cd0, 0x0004469a, 0x00098c55, 0x000c0a13 }, | |
2502 | { 60, 0x00002cd0, 0x000446a2, 0x00098e55, 0x000c0a03 }, | |
2503 | { 64, 0x00002cd0, 0x000446a6, 0x00099255, 0x000c0a1b }, | |
2504 | ||
2505 | /* 802.11 HyperLan 2 */ | |
2506 | { 100, 0x00002cd4, 0x0004489a, 0x000b9855, 0x000c0a03 }, | |
2507 | { 104, 0x00002cd4, 0x000448a2, 0x000b9855, 0x000c0a03 }, | |
2508 | { 108, 0x00002cd4, 0x000448aa, 0x000b9855, 0x000c0a03 }, | |
2509 | { 112, 0x00002cd4, 0x000448b2, 0x000b9a55, 0x000c0a03 }, | |
2510 | { 116, 0x00002cd4, 0x000448ba, 0x000b9a55, 0x000c0a03 }, | |
2511 | { 120, 0x00002cd0, 0x00044702, 0x000b9a55, 0x000c0a03 }, | |
2512 | { 124, 0x00002cd0, 0x00044706, 0x000b9a55, 0x000c0a1b }, | |
2513 | { 128, 0x00002cd0, 0x0004470e, 0x000b9c55, 0x000c0a0b }, | |
2514 | { 132, 0x00002cd0, 0x00044712, 0x000b9c55, 0x000c0a23 }, | |
2515 | { 136, 0x00002cd0, 0x0004471a, 0x000b9e55, 0x000c0a13 }, | |
2516 | ||
2517 | /* 802.11 UNII */ | |
2518 | { 140, 0x00002cd0, 0x00044722, 0x000b9e55, 0x000c0a03 }, | |
2519 | { 149, 0x00002cd0, 0x0004472e, 0x000ba255, 0x000c0a1b }, | |
2520 | { 153, 0x00002cd0, 0x00044736, 0x000ba255, 0x000c0a0b }, | |
2521 | { 157, 0x00002cd4, 0x0004490a, 0x000ba255, 0x000c0a17 }, | |
2522 | { 161, 0x00002cd4, 0x00044912, 0x000ba255, 0x000c0a17 }, | |
2523 | { 165, 0x00002cd4, 0x0004491a, 0x000ba255, 0x000c0a17 }, | |
2524 | ||
2525 | /* MMAC(Japan)J52 ch 34,38,42,46 */ | |
2526 | { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000c0a0b }, | |
2527 | { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000c0a13 }, | |
2528 | { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000c0a1b }, | |
2529 | { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 }, | |
2530 | }; | |
2531 | ||
8c5e7a5f | 2532 | static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) |
95ea3627 ID |
2533 | { |
2534 | struct hw_mode_spec *spec = &rt2x00dev->spec; | |
8c5e7a5f ID |
2535 | struct channel_info *info; |
2536 | char *tx_power; | |
95ea3627 ID |
2537 | unsigned int i; |
2538 | ||
93b6bd26 GW |
2539 | /* |
2540 | * Disable powersaving as default. | |
2541 | */ | |
2542 | rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; | |
2543 | ||
95ea3627 ID |
2544 | /* |
2545 | * Initialize all hw fields. | |
2546 | */ | |
2547 | rt2x00dev->hw->flags = | |
566bfe5a | 2548 | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | |
4be8c387 JB |
2549 | IEEE80211_HW_SIGNAL_DBM | |
2550 | IEEE80211_HW_SUPPORTS_PS | | |
2551 | IEEE80211_HW_PS_NULLFUNC_STACK; | |
95ea3627 | 2552 | |
14a3bf89 | 2553 | SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); |
95ea3627 ID |
2554 | SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, |
2555 | rt2x00_eeprom_addr(rt2x00dev, | |
2556 | EEPROM_MAC_ADDR_0)); | |
2557 | ||
95ea3627 ID |
2558 | /* |
2559 | * Initialize hw_mode information. | |
2560 | */ | |
31562e80 ID |
2561 | spec->supported_bands = SUPPORT_BAND_2GHZ; |
2562 | spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; | |
95ea3627 ID |
2563 | |
2564 | if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) { | |
2565 | spec->num_channels = 14; | |
2566 | spec->channels = rf_vals_noseq; | |
2567 | } else { | |
2568 | spec->num_channels = 14; | |
2569 | spec->channels = rf_vals_seq; | |
2570 | } | |
2571 | ||
5122d898 | 2572 | if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF5325)) { |
31562e80 | 2573 | spec->supported_bands |= SUPPORT_BAND_5GHZ; |
95ea3627 | 2574 | spec->num_channels = ARRAY_SIZE(rf_vals_seq); |
8c5e7a5f ID |
2575 | } |
2576 | ||
2577 | /* | |
2578 | * Create channel information array | |
2579 | */ | |
2580 | info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); | |
2581 | if (!info) | |
2582 | return -ENOMEM; | |
2583 | ||
2584 | spec->channels_info = info; | |
95ea3627 | 2585 | |
8c5e7a5f ID |
2586 | tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); |
2587 | for (i = 0; i < 14; i++) | |
2588 | info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); | |
95ea3627 | 2589 | |
8c5e7a5f ID |
2590 | if (spec->num_channels > 14) { |
2591 | tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); | |
2592 | for (i = 14; i < spec->num_channels; i++) | |
2593 | info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); | |
95ea3627 | 2594 | } |
8c5e7a5f ID |
2595 | |
2596 | return 0; | |
95ea3627 ID |
2597 | } |
2598 | ||
2599 | static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) | |
2600 | { | |
2601 | int retval; | |
2602 | ||
117839bd PR |
2603 | /* |
2604 | * Disable power saving. | |
2605 | */ | |
2606 | rt2x00pci_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000007); | |
2607 | ||
95ea3627 ID |
2608 | /* |
2609 | * Allocate eeprom data. | |
2610 | */ | |
2611 | retval = rt61pci_validate_eeprom(rt2x00dev); | |
2612 | if (retval) | |
2613 | return retval; | |
2614 | ||
2615 | retval = rt61pci_init_eeprom(rt2x00dev); | |
2616 | if (retval) | |
2617 | return retval; | |
2618 | ||
2619 | /* | |
2620 | * Initialize hw specifications. | |
2621 | */ | |
8c5e7a5f ID |
2622 | retval = rt61pci_probe_hw_mode(rt2x00dev); |
2623 | if (retval) | |
2624 | return retval; | |
95ea3627 | 2625 | |
1afcfd54 IP |
2626 | /* |
2627 | * This device has multiple filters for control frames, | |
2628 | * but has no a separate filter for PS Poll frames. | |
2629 | */ | |
2630 | __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags); | |
2631 | ||
95ea3627 | 2632 | /* |
c4da0048 | 2633 | * This device requires firmware and DMA mapped skbs. |
95ea3627 | 2634 | */ |
066cb637 | 2635 | __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); |
c4da0048 | 2636 | __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); |
008c4482 ID |
2637 | if (!modparam_nohwcrypt) |
2638 | __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); | |
95ea3627 ID |
2639 | |
2640 | /* | |
2641 | * Set the rssi offset. | |
2642 | */ | |
2643 | rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; | |
2644 | ||
2645 | return 0; | |
2646 | } | |
2647 | ||
2648 | /* | |
2649 | * IEEE80211 stack callback functions. | |
2650 | */ | |
2af0a570 ID |
2651 | static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, |
2652 | const struct ieee80211_tx_queue_params *params) | |
2653 | { | |
2654 | struct rt2x00_dev *rt2x00dev = hw->priv; | |
2655 | struct data_queue *queue; | |
2656 | struct rt2x00_field32 field; | |
2657 | int retval; | |
2658 | u32 reg; | |
5e790023 | 2659 | u32 offset; |
2af0a570 ID |
2660 | |
2661 | /* | |
2662 | * First pass the configuration through rt2x00lib, that will | |
2663 | * update the queue settings and validate the input. After that | |
2664 | * we are free to update the registers based on the value | |
2665 | * in the queue parameter. | |
2666 | */ | |
2667 | retval = rt2x00mac_conf_tx(hw, queue_idx, params); | |
2668 | if (retval) | |
2669 | return retval; | |
2670 | ||
5e790023 ID |
2671 | /* |
2672 | * We only need to perform additional register initialization | |
b34e620f | 2673 | * for WMM queues. |
5e790023 ID |
2674 | */ |
2675 | if (queue_idx >= 4) | |
2676 | return 0; | |
2677 | ||
2af0a570 ID |
2678 | queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); |
2679 | ||
2680 | /* Update WMM TXOP register */ | |
5e790023 ID |
2681 | offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2))); |
2682 | field.bit_offset = (queue_idx & 1) * 16; | |
2683 | field.bit_mask = 0xffff << field.bit_offset; | |
2684 | ||
2685 | rt2x00pci_register_read(rt2x00dev, offset, ®); | |
2686 | rt2x00_set_field32(®, field, queue->txop); | |
2687 | rt2x00pci_register_write(rt2x00dev, offset, reg); | |
2af0a570 ID |
2688 | |
2689 | /* Update WMM registers */ | |
2690 | field.bit_offset = queue_idx * 4; | |
2691 | field.bit_mask = 0xf << field.bit_offset; | |
2692 | ||
2693 | rt2x00pci_register_read(rt2x00dev, AIFSN_CSR, ®); | |
2694 | rt2x00_set_field32(®, field, queue->aifs); | |
2695 | rt2x00pci_register_write(rt2x00dev, AIFSN_CSR, reg); | |
2696 | ||
2697 | rt2x00pci_register_read(rt2x00dev, CWMIN_CSR, ®); | |
2698 | rt2x00_set_field32(®, field, queue->cw_min); | |
2699 | rt2x00pci_register_write(rt2x00dev, CWMIN_CSR, reg); | |
2700 | ||
2701 | rt2x00pci_register_read(rt2x00dev, CWMAX_CSR, ®); | |
2702 | rt2x00_set_field32(®, field, queue->cw_max); | |
2703 | rt2x00pci_register_write(rt2x00dev, CWMAX_CSR, reg); | |
2704 | ||
2705 | return 0; | |
2706 | } | |
2707 | ||
95ea3627 ID |
2708 | static u64 rt61pci_get_tsf(struct ieee80211_hw *hw) |
2709 | { | |
2710 | struct rt2x00_dev *rt2x00dev = hw->priv; | |
2711 | u64 tsf; | |
2712 | u32 reg; | |
2713 | ||
2714 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR13, ®); | |
2715 | tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32; | |
2716 | rt2x00pci_register_read(rt2x00dev, TXRX_CSR12, ®); | |
2717 | tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER); | |
2718 | ||
2719 | return tsf; | |
2720 | } | |
2721 | ||
95ea3627 ID |
2722 | static const struct ieee80211_ops rt61pci_mac80211_ops = { |
2723 | .tx = rt2x00mac_tx, | |
4150c572 JB |
2724 | .start = rt2x00mac_start, |
2725 | .stop = rt2x00mac_stop, | |
95ea3627 ID |
2726 | .add_interface = rt2x00mac_add_interface, |
2727 | .remove_interface = rt2x00mac_remove_interface, | |
2728 | .config = rt2x00mac_config, | |
3a643d24 | 2729 | .configure_filter = rt2x00mac_configure_filter, |
930c06f2 | 2730 | .set_tim = rt2x00mac_set_tim, |
61e754f4 | 2731 | .set_key = rt2x00mac_set_key, |
95ea3627 | 2732 | .get_stats = rt2x00mac_get_stats, |
471b3efd | 2733 | .bss_info_changed = rt2x00mac_bss_info_changed, |
2af0a570 | 2734 | .conf_tx = rt61pci_conf_tx, |
95ea3627 | 2735 | .get_tsf = rt61pci_get_tsf, |
e47a5cdd | 2736 | .rfkill_poll = rt2x00mac_rfkill_poll, |
95ea3627 ID |
2737 | }; |
2738 | ||
2739 | static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { | |
2740 | .irq_handler = rt61pci_interrupt, | |
2741 | .probe_hw = rt61pci_probe_hw, | |
2742 | .get_firmware_name = rt61pci_get_firmware_name, | |
0cbe0064 | 2743 | .check_firmware = rt61pci_check_firmware, |
95ea3627 ID |
2744 | .load_firmware = rt61pci_load_firmware, |
2745 | .initialize = rt2x00pci_initialize, | |
2746 | .uninitialize = rt2x00pci_uninitialize, | |
798b7adb ID |
2747 | .get_entry_state = rt61pci_get_entry_state, |
2748 | .clear_entry = rt61pci_clear_entry, | |
95ea3627 | 2749 | .set_device_state = rt61pci_set_device_state, |
95ea3627 | 2750 | .rfkill_poll = rt61pci_rfkill_poll, |
95ea3627 ID |
2751 | .link_stats = rt61pci_link_stats, |
2752 | .reset_tuner = rt61pci_reset_tuner, | |
2753 | .link_tuner = rt61pci_link_tuner, | |
2754 | .write_tx_desc = rt61pci_write_tx_desc, | |
2755 | .write_tx_data = rt2x00pci_write_tx_data, | |
bd88a781 | 2756 | .write_beacon = rt61pci_write_beacon, |
95ea3627 | 2757 | .kick_tx_queue = rt61pci_kick_tx_queue, |
a2c9b652 | 2758 | .kill_tx_queue = rt61pci_kill_tx_queue, |
95ea3627 | 2759 | .fill_rxdone = rt61pci_fill_rxdone, |
61e754f4 ID |
2760 | .config_shared_key = rt61pci_config_shared_key, |
2761 | .config_pairwise_key = rt61pci_config_pairwise_key, | |
3a643d24 | 2762 | .config_filter = rt61pci_config_filter, |
6bb40dd1 | 2763 | .config_intf = rt61pci_config_intf, |
72810379 | 2764 | .config_erp = rt61pci_config_erp, |
e4ea1c40 | 2765 | .config_ant = rt61pci_config_ant, |
95ea3627 ID |
2766 | .config = rt61pci_config, |
2767 | }; | |
2768 | ||
181d6902 ID |
2769 | static const struct data_queue_desc rt61pci_queue_rx = { |
2770 | .entry_num = RX_ENTRIES, | |
2771 | .data_size = DATA_FRAME_SIZE, | |
2772 | .desc_size = RXD_DESC_SIZE, | |
b8be63ff | 2773 | .priv_size = sizeof(struct queue_entry_priv_pci), |
181d6902 ID |
2774 | }; |
2775 | ||
2776 | static const struct data_queue_desc rt61pci_queue_tx = { | |
2777 | .entry_num = TX_ENTRIES, | |
2778 | .data_size = DATA_FRAME_SIZE, | |
2779 | .desc_size = TXD_DESC_SIZE, | |
b8be63ff | 2780 | .priv_size = sizeof(struct queue_entry_priv_pci), |
181d6902 ID |
2781 | }; |
2782 | ||
2783 | static const struct data_queue_desc rt61pci_queue_bcn = { | |
6bb40dd1 | 2784 | .entry_num = 4 * BEACON_ENTRIES, |
78720897 | 2785 | .data_size = 0, /* No DMA required for beacons */ |
181d6902 | 2786 | .desc_size = TXINFO_SIZE, |
b8be63ff | 2787 | .priv_size = sizeof(struct queue_entry_priv_pci), |
181d6902 ID |
2788 | }; |
2789 | ||
95ea3627 | 2790 | static const struct rt2x00_ops rt61pci_ops = { |
04d0362e GW |
2791 | .name = KBUILD_MODNAME, |
2792 | .max_sta_intf = 1, | |
2793 | .max_ap_intf = 4, | |
2794 | .eeprom_size = EEPROM_SIZE, | |
2795 | .rf_size = RF_SIZE, | |
2796 | .tx_queues = NUM_TX_QUEUES, | |
e6218cc4 | 2797 | .extra_tx_headroom = 0, |
04d0362e GW |
2798 | .rx = &rt61pci_queue_rx, |
2799 | .tx = &rt61pci_queue_tx, | |
2800 | .bcn = &rt61pci_queue_bcn, | |
2801 | .lib = &rt61pci_rt2x00_ops, | |
2802 | .hw = &rt61pci_mac80211_ops, | |
95ea3627 | 2803 | #ifdef CONFIG_RT2X00_LIB_DEBUGFS |
04d0362e | 2804 | .debugfs = &rt61pci_rt2x00debug, |
95ea3627 ID |
2805 | #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ |
2806 | }; | |
2807 | ||
2808 | /* | |
2809 | * RT61pci module information. | |
2810 | */ | |
a3aa1884 | 2811 | static DEFINE_PCI_DEVICE_TABLE(rt61pci_device_table) = { |
95ea3627 ID |
2812 | /* RT2561s */ |
2813 | { PCI_DEVICE(0x1814, 0x0301), PCI_DEVICE_DATA(&rt61pci_ops) }, | |
2814 | /* RT2561 v2 */ | |
2815 | { PCI_DEVICE(0x1814, 0x0302), PCI_DEVICE_DATA(&rt61pci_ops) }, | |
2816 | /* RT2661 */ | |
2817 | { PCI_DEVICE(0x1814, 0x0401), PCI_DEVICE_DATA(&rt61pci_ops) }, | |
2818 | { 0, } | |
2819 | }; | |
2820 | ||
2821 | MODULE_AUTHOR(DRV_PROJECT); | |
2822 | MODULE_VERSION(DRV_VERSION); | |
2823 | MODULE_DESCRIPTION("Ralink RT61 PCI & PCMCIA Wireless LAN driver."); | |
2824 | MODULE_SUPPORTED_DEVICE("Ralink RT2561, RT2561s & RT2661 " | |
2825 | "PCI & PCMCIA chipset based cards"); | |
2826 | MODULE_DEVICE_TABLE(pci, rt61pci_device_table); | |
2827 | MODULE_FIRMWARE(FIRMWARE_RT2561); | |
2828 | MODULE_FIRMWARE(FIRMWARE_RT2561s); | |
2829 | MODULE_FIRMWARE(FIRMWARE_RT2661); | |
2830 | MODULE_LICENSE("GPL"); | |
2831 | ||
2832 | static struct pci_driver rt61pci_driver = { | |
2360157c | 2833 | .name = KBUILD_MODNAME, |
95ea3627 ID |
2834 | .id_table = rt61pci_device_table, |
2835 | .probe = rt2x00pci_probe, | |
2836 | .remove = __devexit_p(rt2x00pci_remove), | |
2837 | .suspend = rt2x00pci_suspend, | |
2838 | .resume = rt2x00pci_resume, | |
2839 | }; | |
2840 | ||
2841 | static int __init rt61pci_init(void) | |
2842 | { | |
2843 | return pci_register_driver(&rt61pci_driver); | |
2844 | } | |
2845 | ||
2846 | static void __exit rt61pci_exit(void) | |
2847 | { | |
2848 | pci_unregister_driver(&rt61pci_driver); | |
2849 | } | |
2850 | ||
2851 | module_init(rt61pci_init); | |
2852 | module_exit(rt61pci_exit); |