Move orinoco Kconfig entries into drivers/net/wireless/orinoco/Kconfig
[deliverable/linux.git] / drivers / net / wireless / rt2x00 / rt73usb.c
CommitLineData
95ea3627 1/*
811aa9ca 2 Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
95ea3627
ID
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt73usb
23 Abstract: rt73usb device specific routines.
24 Supported chipsets: rt2571W & rt2671.
25 */
26
a7f3a06c 27#include <linux/crc-itu-t.h>
95ea3627
ID
28#include <linux/delay.h>
29#include <linux/etherdevice.h>
30#include <linux/init.h>
31#include <linux/kernel.h>
32#include <linux/module.h>
33#include <linux/usb.h>
34
35#include "rt2x00.h"
36#include "rt2x00usb.h"
37#include "rt73usb.h"
38
008c4482
ID
39/*
40 * Allow hardware encryption to be disabled.
41 */
42static int modparam_nohwcrypt = 0;
43module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
44MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
45
95ea3627
ID
46/*
47 * Register access.
48 * All access to the CSR registers will go through the methods
0f829b1d 49 * rt2x00usb_register_read and rt2x00usb_register_write.
95ea3627
ID
50 * BBP and RF register require indirect register access,
51 * and use the CSR registers BBPCSR and RFCSR to achieve this.
52 * These indirect registers work with busy bits,
53 * and we will try maximal REGISTER_BUSY_COUNT times to access
54 * the register while taking a REGISTER_BUSY_DELAY us delay
55 * between each attampt. When the busy bit is still set at that time,
56 * the access attempt is considered to have failed,
57 * and we will print an error.
8ff48a8b 58 * The _lock versions must be used if you already hold the csr_mutex
95ea3627 59 */
c9c3b1a5 60#define WAIT_FOR_BBP(__dev, __reg) \
0f829b1d 61 rt2x00usb_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg))
c9c3b1a5 62#define WAIT_FOR_RF(__dev, __reg) \
0f829b1d 63 rt2x00usb_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg))
c9c3b1a5 64
0e14f6d3 65static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
95ea3627
ID
66 const unsigned int word, const u8 value)
67{
68 u32 reg;
69
8ff48a8b 70 mutex_lock(&rt2x00dev->csr_mutex);
3d82346c 71
95ea3627 72 /*
c9c3b1a5
ID
73 * Wait until the BBP becomes available, afterwards we
74 * can safely write the new data into the register.
95ea3627 75 */
c9c3b1a5
ID
76 if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
77 reg = 0;
78 rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
79 rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
80 rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
81 rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);
82
0f829b1d 83 rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
c9c3b1a5 84 }
99ade259 85
8ff48a8b 86 mutex_unlock(&rt2x00dev->csr_mutex);
95ea3627
ID
87}
88
0e14f6d3 89static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
95ea3627
ID
90 const unsigned int word, u8 *value)
91{
92 u32 reg;
93
8ff48a8b 94 mutex_lock(&rt2x00dev->csr_mutex);
3d82346c 95
95ea3627 96 /*
c9c3b1a5
ID
97 * Wait until the BBP becomes available, afterwards we
98 * can safely write the read request into the register.
99 * After the data has been written, we wait until hardware
100 * returns the correct value, if at any time the register
101 * doesn't become available in time, reg will be 0xffffffff
102 * which means we return 0xff to the caller.
95ea3627 103 */
c9c3b1a5
ID
104 if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
105 reg = 0;
106 rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
107 rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
108 rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 1);
95ea3627 109
0f829b1d 110 rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
95ea3627 111
c9c3b1a5
ID
112 WAIT_FOR_BBP(rt2x00dev, &reg);
113 }
95ea3627
ID
114
115 *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
99ade259 116
8ff48a8b 117 mutex_unlock(&rt2x00dev->csr_mutex);
95ea3627
ID
118}
119
0e14f6d3 120static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,
95ea3627
ID
121 const unsigned int word, const u32 value)
122{
123 u32 reg;
95ea3627
ID
124
125 if (!word)
126 return;
127
8ff48a8b 128 mutex_lock(&rt2x00dev->csr_mutex);
3d82346c 129
4f5af6eb 130 /*
c9c3b1a5
ID
131 * Wait until the RF becomes available, afterwards we
132 * can safely write the new data into the register.
4f5af6eb 133 */
c9c3b1a5
ID
134 if (WAIT_FOR_RF(rt2x00dev, &reg)) {
135 reg = 0;
136 rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
137 /*
138 * RF5225 and RF2527 contain 21 bits per RF register value,
139 * all others contain 20 bits.
140 */
141 rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS,
142 20 + (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
143 rt2x00_rf(&rt2x00dev->chip, RF2527)));
144 rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
145 rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);
146
0f829b1d 147 rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR4, reg);
c9c3b1a5
ID
148 rt2x00_rf_write(rt2x00dev, word, value);
149 }
8ff48a8b
ID
150
151 mutex_unlock(&rt2x00dev->csr_mutex);
95ea3627
ID
152}
153
154#ifdef CONFIG_RT2X00_LIB_DEBUGFS
95ea3627
ID
155static const struct rt2x00debug rt73usb_rt2x00debug = {
156 .owner = THIS_MODULE,
157 .csr = {
0f829b1d
ID
158 .read = rt2x00usb_register_read,
159 .write = rt2x00usb_register_write,
743b97ca
ID
160 .flags = RT2X00DEBUGFS_OFFSET,
161 .word_base = CSR_REG_BASE,
95ea3627
ID
162 .word_size = sizeof(u32),
163 .word_count = CSR_REG_SIZE / sizeof(u32),
164 },
165 .eeprom = {
166 .read = rt2x00_eeprom_read,
167 .write = rt2x00_eeprom_write,
743b97ca 168 .word_base = EEPROM_BASE,
95ea3627
ID
169 .word_size = sizeof(u16),
170 .word_count = EEPROM_SIZE / sizeof(u16),
171 },
172 .bbp = {
173 .read = rt73usb_bbp_read,
174 .write = rt73usb_bbp_write,
743b97ca 175 .word_base = BBP_BASE,
95ea3627
ID
176 .word_size = sizeof(u8),
177 .word_count = BBP_SIZE / sizeof(u8),
178 },
179 .rf = {
180 .read = rt2x00_rf_read,
181 .write = rt73usb_rf_write,
743b97ca 182 .word_base = RF_BASE,
95ea3627
ID
183 .word_size = sizeof(u32),
184 .word_count = RF_SIZE / sizeof(u32),
185 },
186};
187#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
188
7396faf4
ID
189#ifdef CONFIG_RT2X00_LIB_RFKILL
190static int rt73usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
191{
192 u32 reg;
193
194 rt2x00usb_register_read(rt2x00dev, MAC_CSR13, &reg);
195 return rt2x00_get_field32(reg, MAC_CSR13_BIT7);
196}
197#else
198#define rt73usb_rfkill_poll NULL
199#endif /* CONFIG_RT2X00_LIB_RFKILL */
200
771fd565 201#ifdef CONFIG_RT2X00_LIB_LEDS
a2e1d52a 202static void rt73usb_brightness_set(struct led_classdev *led_cdev,
a9450b70
ID
203 enum led_brightness brightness)
204{
205 struct rt2x00_led *led =
206 container_of(led_cdev, struct rt2x00_led, led_dev);
207 unsigned int enabled = brightness != LED_OFF;
208 unsigned int a_mode =
209 (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
210 unsigned int bg_mode =
211 (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
212
213 if (led->type == LED_TYPE_RADIO) {
214 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
215 MCU_LEDCS_RADIO_STATUS, enabled);
216
47b10cd1
ID
217 rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
218 0, led->rt2x00dev->led_mcu_reg,
219 REGISTER_TIMEOUT);
a9450b70
ID
220 } else if (led->type == LED_TYPE_ASSOC) {
221 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
222 MCU_LEDCS_LINK_BG_STATUS, bg_mode);
223 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
224 MCU_LEDCS_LINK_A_STATUS, a_mode);
225
47b10cd1
ID
226 rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
227 0, led->rt2x00dev->led_mcu_reg,
228 REGISTER_TIMEOUT);
a9450b70
ID
229 } else if (led->type == LED_TYPE_QUALITY) {
230 /*
231 * The brightness is divided into 6 levels (0 - 5),
232 * this means we need to convert the brightness
233 * argument into the matching level within that range.
234 */
47b10cd1
ID
235 rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
236 brightness / (LED_FULL / 6),
237 led->rt2x00dev->led_mcu_reg,
238 REGISTER_TIMEOUT);
a9450b70
ID
239 }
240}
a2e1d52a
ID
241
242static int rt73usb_blink_set(struct led_classdev *led_cdev,
243 unsigned long *delay_on,
244 unsigned long *delay_off)
245{
246 struct rt2x00_led *led =
247 container_of(led_cdev, struct rt2x00_led, led_dev);
248 u32 reg;
249
0f829b1d 250 rt2x00usb_register_read(led->rt2x00dev, MAC_CSR14, &reg);
a2e1d52a
ID
251 rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, *delay_on);
252 rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, *delay_off);
0f829b1d 253 rt2x00usb_register_write(led->rt2x00dev, MAC_CSR14, reg);
a2e1d52a
ID
254
255 return 0;
256}
475433be
ID
257
258static void rt73usb_init_led(struct rt2x00_dev *rt2x00dev,
259 struct rt2x00_led *led,
260 enum led_type type)
261{
262 led->rt2x00dev = rt2x00dev;
263 led->type = type;
264 led->led_dev.brightness_set = rt73usb_brightness_set;
265 led->led_dev.blink_set = rt73usb_blink_set;
266 led->flags = LED_INITIALIZED;
267}
771fd565 268#endif /* CONFIG_RT2X00_LIB_LEDS */
a9450b70 269
95ea3627
ID
270/*
271 * Configuration handlers.
272 */
906c110f
ID
273static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
274 struct rt2x00lib_crypto *crypto,
275 struct ieee80211_key_conf *key)
276{
277 struct hw_key_entry key_entry;
278 struct rt2x00_field32 field;
279 int timeout;
280 u32 mask;
281 u32 reg;
282
283 if (crypto->cmd == SET_KEY) {
284 /*
285 * rt2x00lib can't determine the correct free
286 * key_idx for shared keys. We have 1 register
287 * with key valid bits. The goal is simple, read
288 * the register, if that is full we have no slots
289 * left.
290 * Note that each BSS is allowed to have up to 4
291 * shared keys, so put a mask over the allowed
292 * entries.
293 */
294 mask = (0xf << crypto->bssidx);
295
0f829b1d 296 rt2x00usb_register_read(rt2x00dev, SEC_CSR0, &reg);
906c110f
ID
297 reg &= mask;
298
299 if (reg && reg == mask)
300 return -ENOSPC;
301
acaf908d 302 key->hw_key_idx += reg ? ffz(reg) : 0;
906c110f
ID
303
304 /*
305 * Upload key to hardware
306 */
307 memcpy(key_entry.key, crypto->key,
308 sizeof(key_entry.key));
309 memcpy(key_entry.tx_mic, crypto->tx_mic,
310 sizeof(key_entry.tx_mic));
311 memcpy(key_entry.rx_mic, crypto->rx_mic,
312 sizeof(key_entry.rx_mic));
313
314 reg = SHARED_KEY_ENTRY(key->hw_key_idx);
315 timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
316 rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
317 USB_VENDOR_REQUEST_OUT, reg,
318 &key_entry,
319 sizeof(key_entry),
320 timeout);
321
322 /*
323 * The cipher types are stored over 2 registers.
324 * bssidx 0 and 1 keys are stored in SEC_CSR1 and
325 * bssidx 1 and 2 keys are stored in SEC_CSR5.
326 * Using the correct defines correctly will cause overhead,
327 * so just calculate the correct offset.
328 */
329 if (key->hw_key_idx < 8) {
330 field.bit_offset = (3 * key->hw_key_idx);
331 field.bit_mask = 0x7 << field.bit_offset;
332
0f829b1d 333 rt2x00usb_register_read(rt2x00dev, SEC_CSR1, &reg);
906c110f 334 rt2x00_set_field32(&reg, field, crypto->cipher);
0f829b1d 335 rt2x00usb_register_write(rt2x00dev, SEC_CSR1, reg);
906c110f
ID
336 } else {
337 field.bit_offset = (3 * (key->hw_key_idx - 8));
338 field.bit_mask = 0x7 << field.bit_offset;
339
0f829b1d 340 rt2x00usb_register_read(rt2x00dev, SEC_CSR5, &reg);
906c110f 341 rt2x00_set_field32(&reg, field, crypto->cipher);
0f829b1d 342 rt2x00usb_register_write(rt2x00dev, SEC_CSR5, reg);
906c110f
ID
343 }
344
345 /*
346 * The driver does not support the IV/EIV generation
347 * in hardware. However it doesn't support the IV/EIV
348 * inside the ieee80211 frame either, but requires it
349 * to be provided seperately for the descriptor.
350 * rt2x00lib will cut the IV/EIV data out of all frames
351 * given to us by mac80211, but we must tell mac80211
352 * to generate the IV/EIV data.
353 */
354 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
355 }
356
357 /*
358 * SEC_CSR0 contains only single-bit fields to indicate
359 * a particular key is valid. Because using the FIELD32()
360 * defines directly will cause a lot of overhead we use
361 * a calculation to determine the correct bit directly.
362 */
363 mask = 1 << key->hw_key_idx;
364
0f829b1d 365 rt2x00usb_register_read(rt2x00dev, SEC_CSR0, &reg);
906c110f
ID
366 if (crypto->cmd == SET_KEY)
367 reg |= mask;
368 else if (crypto->cmd == DISABLE_KEY)
369 reg &= ~mask;
0f829b1d 370 rt2x00usb_register_write(rt2x00dev, SEC_CSR0, reg);
906c110f
ID
371
372 return 0;
373}
374
375static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
376 struct rt2x00lib_crypto *crypto,
377 struct ieee80211_key_conf *key)
378{
379 struct hw_pairwise_ta_entry addr_entry;
380 struct hw_key_entry key_entry;
381 int timeout;
382 u32 mask;
383 u32 reg;
384
385 if (crypto->cmd == SET_KEY) {
386 /*
387 * rt2x00lib can't determine the correct free
388 * key_idx for pairwise keys. We have 2 registers
389 * with key valid bits. The goal is simple, read
390 * the first register, if that is full move to
391 * the next register.
392 * When both registers are full, we drop the key,
393 * otherwise we use the first invalid entry.
394 */
0f829b1d 395 rt2x00usb_register_read(rt2x00dev, SEC_CSR2, &reg);
906c110f
ID
396 if (reg && reg == ~0) {
397 key->hw_key_idx = 32;
0f829b1d 398 rt2x00usb_register_read(rt2x00dev, SEC_CSR3, &reg);
906c110f
ID
399 if (reg && reg == ~0)
400 return -ENOSPC;
401 }
402
acaf908d 403 key->hw_key_idx += reg ? ffz(reg) : 0;
906c110f
ID
404
405 /*
406 * Upload key to hardware
407 */
408 memcpy(key_entry.key, crypto->key,
409 sizeof(key_entry.key));
410 memcpy(key_entry.tx_mic, crypto->tx_mic,
411 sizeof(key_entry.tx_mic));
412 memcpy(key_entry.rx_mic, crypto->rx_mic,
413 sizeof(key_entry.rx_mic));
414
415 reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
416 timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
417 rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
418 USB_VENDOR_REQUEST_OUT, reg,
419 &key_entry,
420 sizeof(key_entry),
421 timeout);
422
423 /*
424 * Send the address and cipher type to the hardware register.
425 * This data fits within the CSR cache size, so we can use
0f829b1d 426 * rt2x00usb_register_multiwrite() directly.
906c110f
ID
427 */
428 memset(&addr_entry, 0, sizeof(addr_entry));
429 memcpy(&addr_entry, crypto->address, ETH_ALEN);
430 addr_entry.cipher = crypto->cipher;
431
432 reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
0f829b1d 433 rt2x00usb_register_multiwrite(rt2x00dev, reg,
906c110f
ID
434 &addr_entry, sizeof(addr_entry));
435
436 /*
437 * Enable pairwise lookup table for given BSS idx,
438 * without this received frames will not be decrypted
439 * by the hardware.
440 */
0f829b1d 441 rt2x00usb_register_read(rt2x00dev, SEC_CSR4, &reg);
906c110f 442 reg |= (1 << crypto->bssidx);
0f829b1d 443 rt2x00usb_register_write(rt2x00dev, SEC_CSR4, reg);
906c110f
ID
444
445 /*
446 * The driver does not support the IV/EIV generation
447 * in hardware. However it doesn't support the IV/EIV
448 * inside the ieee80211 frame either, but requires it
449 * to be provided seperately for the descriptor.
450 * rt2x00lib will cut the IV/EIV data out of all frames
451 * given to us by mac80211, but we must tell mac80211
452 * to generate the IV/EIV data.
453 */
454 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
455 }
456
457 /*
458 * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
459 * a particular key is valid. Because using the FIELD32()
460 * defines directly will cause a lot of overhead we use
461 * a calculation to determine the correct bit directly.
462 */
463 if (key->hw_key_idx < 32) {
464 mask = 1 << key->hw_key_idx;
465
0f829b1d 466 rt2x00usb_register_read(rt2x00dev, SEC_CSR2, &reg);
906c110f
ID
467 if (crypto->cmd == SET_KEY)
468 reg |= mask;
469 else if (crypto->cmd == DISABLE_KEY)
470 reg &= ~mask;
0f829b1d 471 rt2x00usb_register_write(rt2x00dev, SEC_CSR2, reg);
906c110f
ID
472 } else {
473 mask = 1 << (key->hw_key_idx - 32);
474
0f829b1d 475 rt2x00usb_register_read(rt2x00dev, SEC_CSR3, &reg);
906c110f
ID
476 if (crypto->cmd == SET_KEY)
477 reg |= mask;
478 else if (crypto->cmd == DISABLE_KEY)
479 reg &= ~mask;
0f829b1d 480 rt2x00usb_register_write(rt2x00dev, SEC_CSR3, reg);
906c110f
ID
481 }
482
483 return 0;
484}
485
3a643d24
ID
486static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev,
487 const unsigned int filter_flags)
488{
489 u32 reg;
490
491 /*
492 * Start configuration steps.
493 * Note that the version error will always be dropped
494 * and broadcast frames will always be accepted since
495 * there is no filter for it at this time.
496 */
0f829b1d 497 rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
3a643d24
ID
498 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC,
499 !(filter_flags & FIF_FCSFAIL));
500 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL,
501 !(filter_flags & FIF_PLCPFAIL));
502 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
503 !(filter_flags & FIF_CONTROL));
504 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
505 !(filter_flags & FIF_PROMISC_IN_BSS));
506 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
e0b005fa
ID
507 !(filter_flags & FIF_PROMISC_IN_BSS) &&
508 !rt2x00dev->intf_ap_count);
3a643d24
ID
509 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
510 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
511 !(filter_flags & FIF_ALLMULTI));
512 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BROADCAST, 0);
513 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS,
514 !(filter_flags & FIF_CONTROL));
0f829b1d 515 rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
3a643d24
ID
516}
517
6bb40dd1
ID
518static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev,
519 struct rt2x00_intf *intf,
520 struct rt2x00intf_conf *conf,
521 const unsigned int flags)
95ea3627 522{
6bb40dd1
ID
523 unsigned int beacon_base;
524 u32 reg;
95ea3627 525
6bb40dd1
ID
526 if (flags & CONFIG_UPDATE_TYPE) {
527 /*
528 * Clear current synchronisation setup.
529 * For the Beacon base registers we only need to clear
530 * the first byte since that byte contains the VALID and OWNER
531 * bits which (when set to 0) will invalidate the entire beacon.
532 */
533 beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
0f829b1d 534 rt2x00usb_register_write(rt2x00dev, beacon_base, 0);
95ea3627 535
6bb40dd1
ID
536 /*
537 * Enable synchronisation.
538 */
0f829b1d 539 rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
fd3c91c5 540 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
6bb40dd1 541 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, conf->sync);
fd3c91c5 542 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
0f829b1d 543 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
6bb40dd1 544 }
95ea3627 545
6bb40dd1
ID
546 if (flags & CONFIG_UPDATE_MAC) {
547 reg = le32_to_cpu(conf->mac[1]);
548 rt2x00_set_field32(&reg, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
549 conf->mac[1] = cpu_to_le32(reg);
95ea3627 550
0f829b1d 551 rt2x00usb_register_multiwrite(rt2x00dev, MAC_CSR2,
6bb40dd1
ID
552 conf->mac, sizeof(conf->mac));
553 }
95ea3627 554
6bb40dd1
ID
555 if (flags & CONFIG_UPDATE_BSSID) {
556 reg = le32_to_cpu(conf->bssid[1]);
557 rt2x00_set_field32(&reg, MAC_CSR5_BSS_ID_MASK, 3);
558 conf->bssid[1] = cpu_to_le32(reg);
95ea3627 559
0f829b1d 560 rt2x00usb_register_multiwrite(rt2x00dev, MAC_CSR4,
6bb40dd1
ID
561 conf->bssid, sizeof(conf->bssid));
562 }
95ea3627
ID
563}
564
3a643d24
ID
565static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev,
566 struct rt2x00lib_erp *erp)
95ea3627 567{
95ea3627 568 u32 reg;
95ea3627 569
0f829b1d 570 rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
72810379 571 rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
0f829b1d 572 rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
95ea3627 573
0f829b1d 574 rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
4f5af6eb 575 rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
72810379 576 !!erp->short_preamble);
0f829b1d 577 rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
95ea3627 578
0f829b1d 579 rt2x00usb_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates);
95ea3627 580
0f829b1d 581 rt2x00usb_register_read(rt2x00dev, MAC_CSR9, &reg);
e4ea1c40 582 rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME, erp->slot_time);
0f829b1d 583 rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg);
95ea3627 584
0f829b1d 585 rt2x00usb_register_read(rt2x00dev, MAC_CSR8, &reg);
e4ea1c40
ID
586 rt2x00_set_field32(&reg, MAC_CSR8_SIFS, erp->sifs);
587 rt2x00_set_field32(&reg, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
588 rt2x00_set_field32(&reg, MAC_CSR8_EIFS, erp->eifs);
0f829b1d 589 rt2x00usb_register_write(rt2x00dev, MAC_CSR8, reg);
95ea3627
ID
590}
591
592static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
addc81bd 593 struct antenna_setup *ant)
95ea3627
ID
594{
595 u8 r3;
596 u8 r4;
597 u8 r77;
2676c94d 598 u8 temp;
95ea3627
ID
599
600 rt73usb_bbp_read(rt2x00dev, 3, &r3);
601 rt73usb_bbp_read(rt2x00dev, 4, &r4);
602 rt73usb_bbp_read(rt2x00dev, 77, &r77);
603
604 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
605
e4cd2ff8
ID
606 /*
607 * Configure the RX antenna.
608 */
addc81bd 609 switch (ant->rx) {
95ea3627 610 case ANTENNA_HW_DIVERSITY:
2676c94d
MN
611 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
612 temp = !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)
8318d78a 613 && (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ);
2676c94d 614 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp);
95ea3627
ID
615 break;
616 case ANTENNA_A:
2676c94d 617 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
95ea3627 618 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
8318d78a 619 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
2676c94d
MN
620 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
621 else
622 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
95ea3627
ID
623 break;
624 case ANTENNA_B:
a4fe07d9 625 default:
2676c94d 626 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
95ea3627 627 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
8318d78a 628 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
2676c94d
MN
629 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
630 else
631 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
95ea3627
ID
632 break;
633 }
634
635 rt73usb_bbp_write(rt2x00dev, 77, r77);
636 rt73usb_bbp_write(rt2x00dev, 3, r3);
637 rt73usb_bbp_write(rt2x00dev, 4, r4);
638}
639
640static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
addc81bd 641 struct antenna_setup *ant)
95ea3627
ID
642{
643 u8 r3;
644 u8 r4;
645 u8 r77;
646
647 rt73usb_bbp_read(rt2x00dev, 3, &r3);
648 rt73usb_bbp_read(rt2x00dev, 4, &r4);
649 rt73usb_bbp_read(rt2x00dev, 77, &r77);
650
651 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
652 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
653 !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
654
e4cd2ff8
ID
655 /*
656 * Configure the RX antenna.
657 */
addc81bd 658 switch (ant->rx) {
95ea3627 659 case ANTENNA_HW_DIVERSITY:
2676c94d 660 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
95ea3627
ID
661 break;
662 case ANTENNA_A:
2676c94d
MN
663 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
664 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
95ea3627
ID
665 break;
666 case ANTENNA_B:
a4fe07d9 667 default:
2676c94d
MN
668 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
669 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
95ea3627
ID
670 break;
671 }
672
673 rt73usb_bbp_write(rt2x00dev, 77, r77);
674 rt73usb_bbp_write(rt2x00dev, 3, r3);
675 rt73usb_bbp_write(rt2x00dev, 4, r4);
676}
677
678struct antenna_sel {
679 u8 word;
680 /*
681 * value[0] -> non-LNA
682 * value[1] -> LNA
683 */
684 u8 value[2];
685};
686
687static const struct antenna_sel antenna_sel_a[] = {
688 { 96, { 0x58, 0x78 } },
689 { 104, { 0x38, 0x48 } },
690 { 75, { 0xfe, 0x80 } },
691 { 86, { 0xfe, 0x80 } },
692 { 88, { 0xfe, 0x80 } },
693 { 35, { 0x60, 0x60 } },
694 { 97, { 0x58, 0x58 } },
695 { 98, { 0x58, 0x58 } },
696};
697
698static const struct antenna_sel antenna_sel_bg[] = {
699 { 96, { 0x48, 0x68 } },
700 { 104, { 0x2c, 0x3c } },
701 { 75, { 0xfe, 0x80 } },
702 { 86, { 0xfe, 0x80 } },
703 { 88, { 0xfe, 0x80 } },
704 { 35, { 0x50, 0x50 } },
705 { 97, { 0x48, 0x48 } },
706 { 98, { 0x48, 0x48 } },
707};
708
e4ea1c40
ID
709static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev,
710 struct antenna_setup *ant)
95ea3627
ID
711{
712 const struct antenna_sel *sel;
713 unsigned int lna;
714 unsigned int i;
715 u32 reg;
716
a4fe07d9
ID
717 /*
718 * We should never come here because rt2x00lib is supposed
719 * to catch this and send us the correct antenna explicitely.
720 */
721 BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
722 ant->tx == ANTENNA_SW_DIVERSITY);
723
8318d78a 724 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
95ea3627
ID
725 sel = antenna_sel_a;
726 lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
95ea3627
ID
727 } else {
728 sel = antenna_sel_bg;
729 lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
95ea3627
ID
730 }
731
2676c94d
MN
732 for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
733 rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
734
0f829b1d 735 rt2x00usb_register_read(rt2x00dev, PHY_CSR0, &reg);
2676c94d 736
ddc827f9 737 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG,
8318d78a 738 (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ));
ddc827f9 739 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A,
8318d78a 740 (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ));
ddc827f9 741
0f829b1d 742 rt2x00usb_register_write(rt2x00dev, PHY_CSR0, reg);
95ea3627
ID
743
744 if (rt2x00_rf(&rt2x00dev->chip, RF5226) ||
745 rt2x00_rf(&rt2x00dev->chip, RF5225))
addc81bd 746 rt73usb_config_antenna_5x(rt2x00dev, ant);
95ea3627
ID
747 else if (rt2x00_rf(&rt2x00dev->chip, RF2528) ||
748 rt2x00_rf(&rt2x00dev->chip, RF2527))
addc81bd 749 rt73usb_config_antenna_2x(rt2x00dev, ant);
95ea3627
ID
750}
751
e4ea1c40 752static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
5c58ee51 753 struct rt2x00lib_conf *libconf)
e4ea1c40
ID
754{
755 u16 eeprom;
756 short lna_gain = 0;
757
758 if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) {
759 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
760 lna_gain += 14;
761
762 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
763 lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
764 } else {
765 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
766 lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
767 }
768
769 rt2x00dev->lna_gain = lna_gain;
770}
771
772static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev,
773 struct rf_channel *rf, const int txpower)
774{
775 u8 r3;
776 u8 r94;
777 u8 smart;
778
779 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
780 rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
781
782 smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
783 rt2x00_rf(&rt2x00dev->chip, RF2527));
784
785 rt73usb_bbp_read(rt2x00dev, 3, &r3);
786 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
787 rt73usb_bbp_write(rt2x00dev, 3, r3);
788
789 r94 = 6;
790 if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
791 r94 += txpower - MAX_TXPOWER;
792 else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
793 r94 += txpower;
794 rt73usb_bbp_write(rt2x00dev, 94, r94);
795
796 rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
797 rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
798 rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
799 rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
800
801 rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
802 rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
803 rt73usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
804 rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
805
806 rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
807 rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
808 rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
809 rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
810
811 udelay(10);
812}
813
814static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev,
815 const int txpower)
816{
817 struct rf_channel rf;
818
819 rt2x00_rf_read(rt2x00dev, 1, &rf.rf1);
820 rt2x00_rf_read(rt2x00dev, 2, &rf.rf2);
821 rt2x00_rf_read(rt2x00dev, 3, &rf.rf3);
822 rt2x00_rf_read(rt2x00dev, 4, &rf.rf4);
823
824 rt73usb_config_channel(rt2x00dev, &rf, txpower);
825}
826
827static void rt73usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
828 struct rt2x00lib_conf *libconf)
95ea3627
ID
829{
830 u32 reg;
831
0f829b1d 832 rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
e4ea1c40
ID
833 rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT,
834 libconf->conf->long_frame_max_tx_count);
835 rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT,
836 libconf->conf->short_frame_max_tx_count);
0f829b1d 837 rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
e4ea1c40 838}
95ea3627 839
e4ea1c40
ID
840static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev,
841 struct rt2x00lib_conf *libconf)
842{
843 u32 reg;
95ea3627 844
0f829b1d 845 rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
95ea3627 846 rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
0f829b1d 847 rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
95ea3627 848
0f829b1d 849 rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
95ea3627 850 rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
0f829b1d 851 rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
95ea3627 852
0f829b1d 853 rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
5c58ee51
ID
854 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
855 libconf->conf->beacon_int * 16);
0f829b1d 856 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
95ea3627
ID
857}
858
7d7f19cc
ID
859static void rt73usb_config_ps(struct rt2x00_dev *rt2x00dev,
860 struct rt2x00lib_conf *libconf)
861{
862 enum dev_state state =
863 (libconf->conf->flags & IEEE80211_CONF_PS) ?
864 STATE_SLEEP : STATE_AWAKE;
865 u32 reg;
866
867 if (state == STATE_SLEEP) {
868 rt2x00usb_register_read(rt2x00dev, MAC_CSR11, &reg);
869 rt2x00_set_field32(&reg, MAC_CSR11_DELAY_AFTER_TBCN,
870 libconf->conf->beacon_int - 10);
871 rt2x00_set_field32(&reg, MAC_CSR11_TBCN_BEFORE_WAKEUP,
872 libconf->conf->listen_interval - 1);
873 rt2x00_set_field32(&reg, MAC_CSR11_WAKEUP_LATENCY, 5);
874
875 /* We must first disable autowake before it can be enabled */
876 rt2x00_set_field32(&reg, MAC_CSR11_AUTOWAKE, 0);
877 rt2x00usb_register_write(rt2x00dev, MAC_CSR11, reg);
878
879 rt2x00_set_field32(&reg, MAC_CSR11_AUTOWAKE, 1);
880 rt2x00usb_register_write(rt2x00dev, MAC_CSR11, reg);
881
882 rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
883 USB_MODE_SLEEP, REGISTER_TIMEOUT);
884 } else {
885 rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
886 USB_MODE_WAKEUP, REGISTER_TIMEOUT);
887
888 rt2x00usb_register_read(rt2x00dev, MAC_CSR11, &reg);
889 rt2x00_set_field32(&reg, MAC_CSR11_DELAY_AFTER_TBCN, 0);
890 rt2x00_set_field32(&reg, MAC_CSR11_TBCN_BEFORE_WAKEUP, 0);
891 rt2x00_set_field32(&reg, MAC_CSR11_AUTOWAKE, 0);
892 rt2x00_set_field32(&reg, MAC_CSR11_WAKEUP_LATENCY, 0);
893 rt2x00usb_register_write(rt2x00dev, MAC_CSR11, reg);
894 }
895}
896
95ea3627 897static void rt73usb_config(struct rt2x00_dev *rt2x00dev,
6bb40dd1
ID
898 struct rt2x00lib_conf *libconf,
899 const unsigned int flags)
95ea3627 900{
ba2ab471
ID
901 /* Always recalculate LNA gain before changing configuration */
902 rt73usb_config_lna_gain(rt2x00dev, libconf);
903
e4ea1c40 904 if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
5c58ee51
ID
905 rt73usb_config_channel(rt2x00dev, &libconf->rf,
906 libconf->conf->power_level);
e4ea1c40
ID
907 if ((flags & IEEE80211_CONF_CHANGE_POWER) &&
908 !(flags & IEEE80211_CONF_CHANGE_CHANNEL))
5c58ee51 909 rt73usb_config_txpower(rt2x00dev, libconf->conf->power_level);
e4ea1c40
ID
910 if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
911 rt73usb_config_retry_limit(rt2x00dev, libconf);
912 if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
5c58ee51 913 rt73usb_config_duration(rt2x00dev, libconf);
7d7f19cc
ID
914 if (flags & IEEE80211_CONF_CHANGE_PS)
915 rt73usb_config_ps(rt2x00dev, libconf);
95ea3627
ID
916}
917
95ea3627
ID
918/*
919 * Link tuning
920 */
ebcf26da
ID
921static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev,
922 struct link_qual *qual)
95ea3627
ID
923{
924 u32 reg;
925
926 /*
927 * Update FCS error count from register.
928 */
0f829b1d 929 rt2x00usb_register_read(rt2x00dev, STA_CSR0, &reg);
ebcf26da 930 qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);
95ea3627
ID
931
932 /*
933 * Update False CCA count from register.
934 */
0f829b1d 935 rt2x00usb_register_read(rt2x00dev, STA_CSR1, &reg);
ebcf26da 936 qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
95ea3627
ID
937}
938
5352ff65
ID
939static inline void rt73usb_set_vgc(struct rt2x00_dev *rt2x00dev,
940 struct link_qual *qual, u8 vgc_level)
eb20b4e8 941{
5352ff65 942 if (qual->vgc_level != vgc_level) {
eb20b4e8 943 rt73usb_bbp_write(rt2x00dev, 17, vgc_level);
5352ff65
ID
944 qual->vgc_level = vgc_level;
945 qual->vgc_level_reg = vgc_level;
eb20b4e8
ID
946 }
947}
948
5352ff65
ID
949static void rt73usb_reset_tuner(struct rt2x00_dev *rt2x00dev,
950 struct link_qual *qual)
95ea3627 951{
5352ff65 952 rt73usb_set_vgc(rt2x00dev, qual, 0x20);
95ea3627
ID
953}
954
5352ff65
ID
955static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev,
956 struct link_qual *qual, const u32 count)
95ea3627 957{
95ea3627
ID
958 u8 up_bound;
959 u8 low_bound;
960
95ea3627
ID
961 /*
962 * Determine r17 bounds.
963 */
8318d78a 964 if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
95ea3627
ID
965 low_bound = 0x28;
966 up_bound = 0x48;
967
968 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
969 low_bound += 0x10;
970 up_bound += 0x10;
971 }
972 } else {
5352ff65 973 if (qual->rssi > -82) {
95ea3627
ID
974 low_bound = 0x1c;
975 up_bound = 0x40;
5352ff65 976 } else if (qual->rssi > -84) {
95ea3627
ID
977 low_bound = 0x1c;
978 up_bound = 0x20;
979 } else {
980 low_bound = 0x1c;
981 up_bound = 0x1c;
982 }
983
984 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
985 low_bound += 0x14;
986 up_bound += 0x10;
987 }
988 }
989
6bb40dd1
ID
990 /*
991 * If we are not associated, we should go straight to the
992 * dynamic CCA tuning.
993 */
994 if (!rt2x00dev->intf_associated)
995 goto dynamic_cca_tune;
996
95ea3627
ID
997 /*
998 * Special big-R17 for very short distance
999 */
5352ff65
ID
1000 if (qual->rssi > -35) {
1001 rt73usb_set_vgc(rt2x00dev, qual, 0x60);
95ea3627
ID
1002 return;
1003 }
1004
1005 /*
1006 * Special big-R17 for short distance
1007 */
5352ff65
ID
1008 if (qual->rssi >= -58) {
1009 rt73usb_set_vgc(rt2x00dev, qual, up_bound);
95ea3627
ID
1010 return;
1011 }
1012
1013 /*
1014 * Special big-R17 for middle-short distance
1015 */
5352ff65
ID
1016 if (qual->rssi >= -66) {
1017 rt73usb_set_vgc(rt2x00dev, qual, low_bound + 0x10);
95ea3627
ID
1018 return;
1019 }
1020
1021 /*
1022 * Special mid-R17 for middle distance
1023 */
5352ff65
ID
1024 if (qual->rssi >= -74) {
1025 rt73usb_set_vgc(rt2x00dev, qual, low_bound + 0x08);
95ea3627
ID
1026 return;
1027 }
1028
1029 /*
1030 * Special case: Change up_bound based on the rssi.
1031 * Lower up_bound when rssi is weaker then -74 dBm.
1032 */
5352ff65 1033 up_bound -= 2 * (-74 - qual->rssi);
95ea3627
ID
1034 if (low_bound > up_bound)
1035 up_bound = low_bound;
1036
5352ff65
ID
1037 if (qual->vgc_level > up_bound) {
1038 rt73usb_set_vgc(rt2x00dev, qual, up_bound);
95ea3627
ID
1039 return;
1040 }
1041
6bb40dd1
ID
1042dynamic_cca_tune:
1043
95ea3627
ID
1044 /*
1045 * r17 does not yet exceed upper limit, continue and base
1046 * the r17 tuning on the false CCA count.
1047 */
5352ff65
ID
1048 if ((qual->false_cca > 512) && (qual->vgc_level < up_bound))
1049 rt73usb_set_vgc(rt2x00dev, qual,
1050 min_t(u8, qual->vgc_level + 4, up_bound));
1051 else if ((qual->false_cca < 100) && (qual->vgc_level > low_bound))
1052 rt73usb_set_vgc(rt2x00dev, qual,
1053 max_t(u8, qual->vgc_level - 4, low_bound));
95ea3627
ID
1054}
1055
1056/*
a7f3a06c 1057 * Firmware functions
95ea3627
ID
1058 */
1059static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
1060{
1061 return FIRMWARE_RT2571;
1062}
1063
f160ebcb 1064static u16 rt73usb_get_firmware_crc(const void *data, const size_t len)
a7f3a06c
ID
1065{
1066 u16 crc;
1067
1068 /*
1069 * Use the crc itu-t algorithm.
1070 * The last 2 bytes in the firmware array are the crc checksum itself,
1071 * this means that we should never pass those 2 bytes to the crc
1072 * algorithm.
1073 */
1074 crc = crc_itu_t(0, data, len - 2);
1075 crc = crc_itu_t_byte(crc, 0);
1076 crc = crc_itu_t_byte(crc, 0);
1077
1078 return crc;
1079}
1080
f160ebcb 1081static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
95ea3627
ID
1082 const size_t len)
1083{
1084 unsigned int i;
1085 int status;
1086 u32 reg;
95ea3627
ID
1087
1088 /*
1089 * Wait for stable hardware.
1090 */
1091 for (i = 0; i < 100; i++) {
0f829b1d 1092 rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
95ea3627
ID
1093 if (reg)
1094 break;
1095 msleep(1);
1096 }
1097
1098 if (!reg) {
1099 ERROR(rt2x00dev, "Unstable hardware.\n");
1100 return -EBUSY;
1101 }
1102
1103 /*
1104 * Write firmware to device.
95ea3627 1105 */
3e0c1abe
IM
1106 rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
1107 USB_VENDOR_REQUEST_OUT,
1108 FIRMWARE_IMAGE_BASE,
1109 data, len,
1110 REGISTER_TIMEOUT32(len));
95ea3627
ID
1111
1112 /*
1113 * Send firmware request to device to load firmware,
1114 * we need to specify a long timeout time.
1115 */
1116 status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
3b640f21 1117 0, USB_MODE_FIRMWARE,
95ea3627
ID
1118 REGISTER_TIMEOUT_FIRMWARE);
1119 if (status < 0) {
1120 ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
1121 return status;
1122 }
1123
95ea3627
ID
1124 return 0;
1125}
1126
a7f3a06c
ID
1127/*
1128 * Initialization functions.
1129 */
95ea3627
ID
1130static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
1131{
1132 u32 reg;
1133
0f829b1d 1134 rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
95ea3627
ID
1135 rt2x00_set_field32(&reg, TXRX_CSR0_AUTO_TX_SEQ, 1);
1136 rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
1137 rt2x00_set_field32(&reg, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
0f829b1d 1138 rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
95ea3627 1139
0f829b1d 1140 rt2x00usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
95ea3627
ID
1141 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
1142 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0_VALID, 1);
1143 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
1144 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1_VALID, 1);
1145 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
1146 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2_VALID, 1);
1147 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
1148 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3_VALID, 1);
0f829b1d 1149 rt2x00usb_register_write(rt2x00dev, TXRX_CSR1, reg);
95ea3627
ID
1150
1151 /*
1152 * CCK TXD BBP registers
1153 */
0f829b1d 1154 rt2x00usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
95ea3627
ID
1155 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0, 13);
1156 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0_VALID, 1);
1157 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1, 12);
1158 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1_VALID, 1);
1159 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2, 11);
1160 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2_VALID, 1);
1161 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3, 10);
1162 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3_VALID, 1);
0f829b1d 1163 rt2x00usb_register_write(rt2x00dev, TXRX_CSR2, reg);
95ea3627
ID
1164
1165 /*
1166 * OFDM TXD BBP registers
1167 */
0f829b1d 1168 rt2x00usb_register_read(rt2x00dev, TXRX_CSR3, &reg);
95ea3627
ID
1169 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0, 7);
1170 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0_VALID, 1);
1171 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1, 6);
1172 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1_VALID, 1);
1173 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2, 5);
1174 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2_VALID, 1);
0f829b1d 1175 rt2x00usb_register_write(rt2x00dev, TXRX_CSR3, reg);
95ea3627 1176
0f829b1d 1177 rt2x00usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
95ea3627
ID
1178 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_6MBS, 59);
1179 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_9MBS, 53);
1180 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_12MBS, 49);
1181 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_18MBS, 46);
0f829b1d 1182 rt2x00usb_register_write(rt2x00dev, TXRX_CSR7, reg);
95ea3627 1183
0f829b1d 1184 rt2x00usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
95ea3627
ID
1185 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_24MBS, 44);
1186 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_36MBS, 42);
1187 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_48MBS, 42);
1188 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
0f829b1d 1189 rt2x00usb_register_write(rt2x00dev, TXRX_CSR8, reg);
95ea3627 1190
0f829b1d 1191 rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
1f909162
ID
1192 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL, 0);
1193 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
1194 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 0);
1195 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
1196 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
1197 rt2x00_set_field32(&reg, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
0f829b1d 1198 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1f909162 1199
0f829b1d 1200 rt2x00usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
95ea3627 1201
0f829b1d 1202 rt2x00usb_register_read(rt2x00dev, MAC_CSR6, &reg);
95ea3627 1203 rt2x00_set_field32(&reg, MAC_CSR6_MAX_FRAME_UNIT, 0xfff);
0f829b1d 1204 rt2x00usb_register_write(rt2x00dev, MAC_CSR6, reg);
95ea3627 1205
0f829b1d 1206 rt2x00usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718);
95ea3627
ID
1207
1208 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
1209 return -EBUSY;
1210
0f829b1d 1211 rt2x00usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00);
95ea3627
ID
1212
1213 /*
1214 * Invalidate all Shared Keys (SEC_CSR0),
1215 * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
1216 */
0f829b1d
ID
1217 rt2x00usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
1218 rt2x00usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
1219 rt2x00usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
95ea3627
ID
1220
1221 reg = 0x000023b0;
1222 if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
1223 rt2x00_rf(&rt2x00dev->chip, RF2527))
1224 rt2x00_set_field32(&reg, PHY_CSR1_RF_RPI, 1);
0f829b1d 1225 rt2x00usb_register_write(rt2x00dev, PHY_CSR1, reg);
95ea3627 1226
0f829b1d
ID
1227 rt2x00usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06);
1228 rt2x00usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
1229 rt2x00usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408);
95ea3627 1230
0f829b1d 1231 rt2x00usb_register_read(rt2x00dev, MAC_CSR9, &reg);
95ea3627 1232 rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
0f829b1d 1233 rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg);
95ea3627 1234
6bb40dd1
ID
1235 /*
1236 * Clear all beacons
1237 * For the Beacon base registers we only need to clear
1238 * the first byte since that byte contains the VALID and OWNER
1239 * bits which (when set to 0) will invalidate the entire beacon.
1240 */
0f829b1d
ID
1241 rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
1242 rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
1243 rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
1244 rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
6bb40dd1 1245
95ea3627
ID
1246 /*
1247 * We must clear the error counters.
1248 * These registers are cleared on read,
1249 * so we may pass a useless variable to store the value.
1250 */
0f829b1d
ID
1251 rt2x00usb_register_read(rt2x00dev, STA_CSR0, &reg);
1252 rt2x00usb_register_read(rt2x00dev, STA_CSR1, &reg);
1253 rt2x00usb_register_read(rt2x00dev, STA_CSR2, &reg);
95ea3627
ID
1254
1255 /*
1256 * Reset MAC and BBP registers.
1257 */
0f829b1d 1258 rt2x00usb_register_read(rt2x00dev, MAC_CSR1, &reg);
95ea3627
ID
1259 rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
1260 rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
0f829b1d 1261 rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg);
95ea3627 1262
0f829b1d 1263 rt2x00usb_register_read(rt2x00dev, MAC_CSR1, &reg);
95ea3627
ID
1264 rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
1265 rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
0f829b1d 1266 rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg);
95ea3627 1267
0f829b1d 1268 rt2x00usb_register_read(rt2x00dev, MAC_CSR1, &reg);
95ea3627 1269 rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
0f829b1d 1270 rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg);
95ea3627
ID
1271
1272 return 0;
1273}
1274
2b08da3f 1275static int rt73usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
95ea3627
ID
1276{
1277 unsigned int i;
95ea3627
ID
1278 u8 value;
1279
1280 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1281 rt73usb_bbp_read(rt2x00dev, 0, &value);
1282 if ((value != 0xff) && (value != 0x00))
2b08da3f 1283 return 0;
95ea3627
ID
1284 udelay(REGISTER_BUSY_DELAY);
1285 }
1286
1287 ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
1288 return -EACCES;
2b08da3f
ID
1289}
1290
1291static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev)
1292{
1293 unsigned int i;
1294 u16 eeprom;
1295 u8 reg_id;
1296 u8 value;
1297
1298 if (unlikely(rt73usb_wait_bbp_ready(rt2x00dev)))
1299 return -EACCES;
95ea3627 1300
95ea3627
ID
1301 rt73usb_bbp_write(rt2x00dev, 3, 0x80);
1302 rt73usb_bbp_write(rt2x00dev, 15, 0x30);
1303 rt73usb_bbp_write(rt2x00dev, 21, 0xc8);
1304 rt73usb_bbp_write(rt2x00dev, 22, 0x38);
1305 rt73usb_bbp_write(rt2x00dev, 23, 0x06);
1306 rt73usb_bbp_write(rt2x00dev, 24, 0xfe);
1307 rt73usb_bbp_write(rt2x00dev, 25, 0x0a);
1308 rt73usb_bbp_write(rt2x00dev, 26, 0x0d);
1309 rt73usb_bbp_write(rt2x00dev, 32, 0x0b);
1310 rt73usb_bbp_write(rt2x00dev, 34, 0x12);
1311 rt73usb_bbp_write(rt2x00dev, 37, 0x07);
1312 rt73usb_bbp_write(rt2x00dev, 39, 0xf8);
1313 rt73usb_bbp_write(rt2x00dev, 41, 0x60);
1314 rt73usb_bbp_write(rt2x00dev, 53, 0x10);
1315 rt73usb_bbp_write(rt2x00dev, 54, 0x18);
1316 rt73usb_bbp_write(rt2x00dev, 60, 0x10);
1317 rt73usb_bbp_write(rt2x00dev, 61, 0x04);
1318 rt73usb_bbp_write(rt2x00dev, 62, 0x04);
1319 rt73usb_bbp_write(rt2x00dev, 75, 0xfe);
1320 rt73usb_bbp_write(rt2x00dev, 86, 0xfe);
1321 rt73usb_bbp_write(rt2x00dev, 88, 0xfe);
1322 rt73usb_bbp_write(rt2x00dev, 90, 0x0f);
1323 rt73usb_bbp_write(rt2x00dev, 99, 0x00);
1324 rt73usb_bbp_write(rt2x00dev, 102, 0x16);
1325 rt73usb_bbp_write(rt2x00dev, 107, 0x04);
1326
95ea3627
ID
1327 for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1328 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1329
1330 if (eeprom != 0xffff && eeprom != 0x0000) {
1331 reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1332 value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
95ea3627
ID
1333 rt73usb_bbp_write(rt2x00dev, reg_id, value);
1334 }
1335 }
95ea3627
ID
1336
1337 return 0;
1338}
1339
1340/*
1341 * Device state switch handlers.
1342 */
1343static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
1344 enum dev_state state)
1345{
1346 u32 reg;
1347
0f829b1d 1348 rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
95ea3627 1349 rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
2b08da3f
ID
1350 (state == STATE_RADIO_RX_OFF) ||
1351 (state == STATE_RADIO_RX_OFF_LINK));
0f829b1d 1352 rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
95ea3627
ID
1353}
1354
1355static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev)
1356{
1357 /*
1358 * Initialize all registers.
1359 */
2b08da3f
ID
1360 if (unlikely(rt73usb_init_registers(rt2x00dev) ||
1361 rt73usb_init_bbp(rt2x00dev)))
95ea3627 1362 return -EIO;
95ea3627 1363
95ea3627
ID
1364 return 0;
1365}
1366
1367static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev)
1368{
0f829b1d 1369 rt2x00usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
95ea3627
ID
1370
1371 /*
1372 * Disable synchronisation.
1373 */
0f829b1d 1374 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, 0);
95ea3627
ID
1375
1376 rt2x00usb_disable_radio(rt2x00dev);
1377}
1378
1379static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
1380{
1381 u32 reg;
1382 unsigned int i;
1383 char put_to_sleep;
95ea3627
ID
1384
1385 put_to_sleep = (state != STATE_AWAKE);
1386
0f829b1d 1387 rt2x00usb_register_read(rt2x00dev, MAC_CSR12, &reg);
95ea3627
ID
1388 rt2x00_set_field32(&reg, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
1389 rt2x00_set_field32(&reg, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
0f829b1d 1390 rt2x00usb_register_write(rt2x00dev, MAC_CSR12, reg);
95ea3627
ID
1391
1392 /*
1393 * Device is not guaranteed to be in the requested state yet.
1394 * We must wait until the register indicates that the
1395 * device has entered the correct state.
1396 */
1397 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
0f829b1d 1398 rt2x00usb_register_read(rt2x00dev, MAC_CSR12, &reg);
2b08da3f
ID
1399 state = rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
1400 if (state == !put_to_sleep)
95ea3627
ID
1401 return 0;
1402 msleep(10);
1403 }
1404
95ea3627
ID
1405 return -EBUSY;
1406}
1407
1408static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
1409 enum dev_state state)
1410{
1411 int retval = 0;
1412
1413 switch (state) {
1414 case STATE_RADIO_ON:
1415 retval = rt73usb_enable_radio(rt2x00dev);
1416 break;
1417 case STATE_RADIO_OFF:
1418 rt73usb_disable_radio(rt2x00dev);
1419 break;
1420 case STATE_RADIO_RX_ON:
61667d8d 1421 case STATE_RADIO_RX_ON_LINK:
95ea3627 1422 case STATE_RADIO_RX_OFF:
61667d8d 1423 case STATE_RADIO_RX_OFF_LINK:
2b08da3f
ID
1424 rt73usb_toggle_rx(rt2x00dev, state);
1425 break;
1426 case STATE_RADIO_IRQ_ON:
1427 case STATE_RADIO_IRQ_OFF:
1428 /* No support, but no error either */
95ea3627
ID
1429 break;
1430 case STATE_DEEP_SLEEP:
1431 case STATE_SLEEP:
1432 case STATE_STANDBY:
1433 case STATE_AWAKE:
1434 retval = rt73usb_set_state(rt2x00dev, state);
1435 break;
1436 default:
1437 retval = -ENOTSUPP;
1438 break;
1439 }
1440
2b08da3f
ID
1441 if (unlikely(retval))
1442 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
1443 state, retval);
1444
95ea3627
ID
1445 return retval;
1446}
1447
1448/*
1449 * TX descriptor initialization
1450 */
1451static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
906c110f
ID
1452 struct sk_buff *skb,
1453 struct txentry_desc *txdesc)
95ea3627 1454{
181d6902 1455 struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
dd3193e1 1456 __le32 *txd = skbdesc->desc;
95ea3627
ID
1457 u32 word;
1458
1459 /*
1460 * Start writing the descriptor words.
1461 */
1462 rt2x00_desc_read(txd, 1, &word);
181d6902
ID
1463 rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue);
1464 rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
1465 rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
1466 rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
906c110f 1467 rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
5adf6d63
ID
1468 rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
1469 test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
95ea3627
ID
1470 rt2x00_desc_write(txd, 1, word);
1471
1472 rt2x00_desc_read(txd, 2, &word);
181d6902
ID
1473 rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
1474 rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
1475 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
1476 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
95ea3627
ID
1477 rt2x00_desc_write(txd, 2, word);
1478
906c110f 1479 if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
1ce9cdac
ID
1480 _rt2x00_desc_write(txd, 3, skbdesc->iv[0]);
1481 _rt2x00_desc_write(txd, 4, skbdesc->iv[1]);
906c110f
ID
1482 }
1483
95ea3627
ID
1484 rt2x00_desc_read(txd, 5, &word);
1485 rt2x00_set_field32(&word, TXD_W5_TX_POWER,
ac1aa7e4 1486 TXPOWER_TO_DEV(rt2x00dev->tx_power));
95ea3627
ID
1487 rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
1488 rt2x00_desc_write(txd, 5, word);
1489
1490 rt2x00_desc_read(txd, 0, &word);
1491 rt2x00_set_field32(&word, TXD_W0_BURST,
181d6902 1492 test_bit(ENTRY_TXD_BURST, &txdesc->flags));
95ea3627
ID
1493 rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1494 rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
181d6902 1495 test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
95ea3627 1496 rt2x00_set_field32(&word, TXD_W0_ACK,
181d6902 1497 test_bit(ENTRY_TXD_ACK, &txdesc->flags));
95ea3627 1498 rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
181d6902 1499 test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
95ea3627 1500 rt2x00_set_field32(&word, TXD_W0_OFDM,
076f9582 1501 (txdesc->rate_mode == RATE_MODE_OFDM));
181d6902 1502 rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
95ea3627 1503 rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
61486e0f 1504 test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
906c110f
ID
1505 rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
1506 test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
1507 rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
1508 test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
1509 rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
1abc3656 1510 rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
95ea3627 1511 rt2x00_set_field32(&word, TXD_W0_BURST2,
181d6902 1512 test_bit(ENTRY_TXD_BURST, &txdesc->flags));
906c110f 1513 rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
95ea3627
ID
1514 rt2x00_desc_write(txd, 0, word);
1515}
1516
bd88a781
ID
1517/*
1518 * TX data initialization
1519 */
1520static void rt73usb_write_beacon(struct queue_entry *entry)
1521{
1522 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1523 struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1524 unsigned int beacon_base;
1525 u32 reg;
1526
1527 /*
1528 * Add the descriptor in front of the skb.
1529 */
1530 skb_push(entry->skb, entry->queue->desc_size);
1531 memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
1532 skbdesc->desc = entry->skb->data;
1533
1534 /*
1535 * Disable beaconing while we are reloading the beacon data,
1536 * otherwise we might be sending out invalid data.
1537 */
0f829b1d 1538 rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
bd88a781
ID
1539 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
1540 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
1541 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
0f829b1d 1542 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
bd88a781
ID
1543
1544 /*
1545 * Write entire beacon with descriptor to register.
1546 */
1547 beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
3e0c1abe
IM
1548 rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
1549 USB_VENDOR_REQUEST_OUT, beacon_base,
1550 entry->skb->data, entry->skb->len,
1551 REGISTER_TIMEOUT32(entry->skb->len));
bd88a781
ID
1552
1553 /*
1554 * Clean up the beacon skb.
1555 */
1556 dev_kfree_skb(entry->skb);
1557 entry->skb = NULL;
1558}
1559
f1ca2167 1560static int rt73usb_get_tx_data_len(struct queue_entry *entry)
dd9fa2d2
ID
1561{
1562 int length;
1563
1564 /*
1565 * The length _must_ be a multiple of 4,
1566 * but it must _not_ be a multiple of the USB packet size.
1567 */
f1ca2167
ID
1568 length = roundup(entry->skb->len, 4);
1569 length += (4 * !(length % entry->queue->usb_maxpacket));
dd9fa2d2
ID
1570
1571 return length;
1572}
1573
95ea3627 1574static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
e58c6aca 1575 const enum data_queue_qid queue)
95ea3627
ID
1576{
1577 u32 reg;
1578
f019d514
ID
1579 if (queue != QID_BEACON) {
1580 rt2x00usb_kick_tx_queue(rt2x00dev, queue);
95ea3627 1581 return;
f019d514 1582 }
95ea3627
ID
1583
1584 /*
1585 * For Wi-Fi faily generated beacons between participating stations.
1586 * Set TBTT phase adaptive adjustment step to 8us (default 16us)
1587 */
0f829b1d 1588 rt2x00usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
95ea3627 1589
0f829b1d 1590 rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
95ea3627 1591 if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
8af244cc
ID
1592 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
1593 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
95ea3627 1594 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
0f829b1d 1595 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
95ea3627
ID
1596 }
1597}
1598
1599/*
1600 * RX control handlers
1601 */
1602static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
1603{
ba2ab471 1604 u8 offset = rt2x00dev->lna_gain;
95ea3627
ID
1605 u8 lna;
1606
1607 lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
1608 switch (lna) {
1609 case 3:
ba2ab471 1610 offset += 90;
95ea3627
ID
1611 break;
1612 case 2:
ba2ab471 1613 offset += 74;
95ea3627
ID
1614 break;
1615 case 1:
ba2ab471 1616 offset += 64;
95ea3627
ID
1617 break;
1618 default:
1619 return 0;
1620 }
1621
8318d78a 1622 if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
95ea3627
ID
1623 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
1624 if (lna == 3 || lna == 2)
1625 offset += 10;
1626 } else {
1627 if (lna == 3)
1628 offset += 6;
1629 else if (lna == 2)
1630 offset += 8;
1631 }
95ea3627
ID
1632 }
1633
1634 return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
1635}
1636
181d6902 1637static void rt73usb_fill_rxdone(struct queue_entry *entry,
55887511 1638 struct rxdone_entry_desc *rxdesc)
95ea3627 1639{
906c110f 1640 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
181d6902 1641 struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
4bd7c452 1642 __le32 *rxd = (__le32 *)entry->skb->data;
95ea3627
ID
1643 u32 word0;
1644 u32 word1;
1645
f855c10b 1646 /*
a26cbc65
GW
1647 * Copy descriptor to the skbdesc->desc buffer, making it safe from moving of
1648 * frame data in rt2x00usb.
f855c10b 1649 */
a26cbc65 1650 memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
70a96109 1651 rxd = (__le32 *)skbdesc->desc;
f855c10b
ID
1652
1653 /*
70a96109 1654 * It is now safe to read the descriptor on all architectures.
f855c10b 1655 */
95ea3627
ID
1656 rt2x00_desc_read(rxd, 0, &word0);
1657 rt2x00_desc_read(rxd, 1, &word1);
1658
4150c572 1659 if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
181d6902 1660 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
95ea3627 1661
906c110f
ID
1662 if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
1663 rxdesc->cipher =
1664 rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
1665 rxdesc->cipher_status =
1666 rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
1667 }
1668
1669 if (rxdesc->cipher != CIPHER_NONE) {
1ce9cdac
ID
1670 _rt2x00_desc_read(rxd, 2, &rxdesc->iv[0]);
1671 _rt2x00_desc_read(rxd, 3, &rxdesc->iv[1]);
74415edb
ID
1672 rxdesc->dev_flags |= RXDONE_CRYPTO_IV;
1673
906c110f 1674 _rt2x00_desc_read(rxd, 4, &rxdesc->icv);
74415edb 1675 rxdesc->dev_flags |= RXDONE_CRYPTO_ICV;
906c110f
ID
1676
1677 /*
1678 * Hardware has stripped IV/EIV data from 802.11 frame during
1679 * decryption. It has provided the data seperately but rt2x00lib
1680 * should decide if it should be reinserted.
1681 */
1682 rxdesc->flags |= RX_FLAG_IV_STRIPPED;
1683
1684 /*
1685 * FIXME: Legacy driver indicates that the frame does
1686 * contain the Michael Mic. Unfortunately, in rt2x00
1687 * the MIC seems to be missing completely...
1688 */
1689 rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
1690
1691 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
1692 rxdesc->flags |= RX_FLAG_DECRYPTED;
1693 else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
1694 rxdesc->flags |= RX_FLAG_MMIC_ERROR;
1695 }
1696
95ea3627
ID
1697 /*
1698 * Obtain the status about this packet.
89993890
ID
1699 * When frame was received with an OFDM bitrate,
1700 * the signal is the PLCP value. If it was received with
1701 * a CCK bitrate the signal is the rate in 100kbit/s.
95ea3627 1702 */
181d6902 1703 rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
906c110f 1704 rxdesc->rssi = rt73usb_agc_to_rssi(rt2x00dev, word1);
181d6902 1705 rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
19d30e02 1706
19d30e02
ID
1707 if (rt2x00_get_field32(word0, RXD_W0_OFDM))
1708 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
6c6aa3c0
ID
1709 else
1710 rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
19d30e02
ID
1711 if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
1712 rxdesc->dev_flags |= RXDONE_MY_BSS;
181d6902 1713
2ae23854 1714 /*
70a96109 1715 * Set skb pointers, and update frame information.
2ae23854 1716 */
70a96109 1717 skb_pull(entry->skb, entry->queue->desc_size);
2ae23854 1718 skb_trim(entry->skb, rxdesc->size);
95ea3627
ID
1719}
1720
1721/*
1722 * Device probe functions.
1723 */
1724static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1725{
1726 u16 word;
1727 u8 *mac;
1728 s8 value;
1729
1730 rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1731
1732 /*
1733 * Start validation of the data that has been read.
1734 */
1735 mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1736 if (!is_valid_ether_addr(mac)) {
1737 random_ether_addr(mac);
e174961c 1738 EEPROM(rt2x00dev, "MAC: %pM\n", mac);
95ea3627
ID
1739 }
1740
1741 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1742 if (word == 0xffff) {
1743 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
362f3b6b
ID
1744 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1745 ANTENNA_B);
1746 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1747 ANTENNA_B);
95ea3627
ID
1748 rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
1749 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1750 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1751 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5226);
1752 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1753 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1754 }
1755
1756 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1757 if (word == 0xffff) {
1758 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA, 0);
1759 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1760 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1761 }
1762
1763 rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word);
1764 if (word == 0xffff) {
1765 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_G, 0);
1766 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_A, 0);
1767 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_ACT, 0);
1768 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_0, 0);
1769 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_1, 0);
1770 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_2, 0);
1771 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_3, 0);
1772 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_4, 0);
1773 rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
1774 LED_MODE_DEFAULT);
1775 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
1776 EEPROM(rt2x00dev, "Led: 0x%04x\n", word);
1777 }
1778
1779 rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
1780 if (word == 0xffff) {
1781 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
1782 rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
1783 rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
1784 EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
1785 }
1786
1787 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word);
1788 if (word == 0xffff) {
1789 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1790 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1791 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1792 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
1793 } else {
1794 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
1795 if (value < -10 || value > 10)
1796 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1797 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
1798 if (value < -10 || value > 10)
1799 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1800 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1801 }
1802
1803 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word);
1804 if (word == 0xffff) {
1805 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1806 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1807 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
417f412f 1808 EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word);
95ea3627
ID
1809 } else {
1810 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
1811 if (value < -10 || value > 10)
1812 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1813 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
1814 if (value < -10 || value > 10)
1815 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1816 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1817 }
1818
1819 return 0;
1820}
1821
1822static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1823{
1824 u32 reg;
1825 u16 value;
1826 u16 eeprom;
1827
1828 /*
1829 * Read EEPROM word for configuration.
1830 */
1831 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1832
1833 /*
1834 * Identify RF chipset.
1835 */
1836 value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
0f829b1d 1837 rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
95ea3627
ID
1838 rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
1839
755a957d 1840 if (!rt2x00_check_rev(&rt2x00dev->chip, 0x25730)) {
95ea3627
ID
1841 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1842 return -ENODEV;
1843 }
1844
1845 if (!rt2x00_rf(&rt2x00dev->chip, RF5226) &&
1846 !rt2x00_rf(&rt2x00dev->chip, RF2528) &&
1847 !rt2x00_rf(&rt2x00dev->chip, RF5225) &&
1848 !rt2x00_rf(&rt2x00dev->chip, RF2527)) {
1849 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1850 return -ENODEV;
1851 }
1852
1853 /*
1854 * Identify default antenna configuration.
1855 */
addc81bd 1856 rt2x00dev->default_ant.tx =
95ea3627 1857 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
addc81bd 1858 rt2x00dev->default_ant.rx =
95ea3627
ID
1859 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1860
1861 /*
1862 * Read the Frame type.
1863 */
1864 if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
1865 __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
1866
7396faf4
ID
1867 /*
1868 * Detect if this device has an hardware controlled radio.
1869 */
1870#ifdef CONFIG_RT2X00_LIB_RFKILL
1871 if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
1872 __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
1873#endif /* CONFIG_RT2X00_LIB_RFKILL */
1874
95ea3627
ID
1875 /*
1876 * Read frequency offset.
1877 */
1878 rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
1879 rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
1880
1881 /*
1882 * Read external LNA informations.
1883 */
1884 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1885
1886 if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA)) {
1887 __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
1888 __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
1889 }
1890
1891 /*
1892 * Store led settings, for correct led behaviour.
1893 */
771fd565 1894#ifdef CONFIG_RT2X00_LIB_LEDS
95ea3627
ID
1895 rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
1896
475433be
ID
1897 rt73usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
1898 rt73usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
1899 if (value == LED_MODE_SIGNAL_STRENGTH)
1900 rt73usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
1901 LED_TYPE_QUALITY);
a9450b70
ID
1902
1903 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
1904 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
95ea3627
ID
1905 rt2x00_get_field16(eeprom,
1906 EEPROM_LED_POLARITY_GPIO_0));
a9450b70 1907 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
95ea3627
ID
1908 rt2x00_get_field16(eeprom,
1909 EEPROM_LED_POLARITY_GPIO_1));
a9450b70 1910 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
95ea3627
ID
1911 rt2x00_get_field16(eeprom,
1912 EEPROM_LED_POLARITY_GPIO_2));
a9450b70 1913 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
95ea3627
ID
1914 rt2x00_get_field16(eeprom,
1915 EEPROM_LED_POLARITY_GPIO_3));
a9450b70 1916 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
95ea3627
ID
1917 rt2x00_get_field16(eeprom,
1918 EEPROM_LED_POLARITY_GPIO_4));
a9450b70 1919 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
95ea3627 1920 rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
a9450b70 1921 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
95ea3627
ID
1922 rt2x00_get_field16(eeprom,
1923 EEPROM_LED_POLARITY_RDY_G));
a9450b70 1924 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
95ea3627
ID
1925 rt2x00_get_field16(eeprom,
1926 EEPROM_LED_POLARITY_RDY_A));
771fd565 1927#endif /* CONFIG_RT2X00_LIB_LEDS */
95ea3627
ID
1928
1929 return 0;
1930}
1931
1932/*
1933 * RF value list for RF2528
1934 * Supports: 2.4 GHz
1935 */
1936static const struct rf_channel rf_vals_bg_2528[] = {
1937 { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1938 { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1939 { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1940 { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1941 { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1942 { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1943 { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
1944 { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
1945 { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
1946 { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
1947 { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
1948 { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
1949 { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
1950 { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
1951};
1952
1953/*
1954 * RF value list for RF5226
1955 * Supports: 2.4 GHz & 5.2 GHz
1956 */
1957static const struct rf_channel rf_vals_5226[] = {
1958 { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1959 { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1960 { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1961 { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1962 { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1963 { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1964 { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
1965 { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
1966 { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
1967 { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
1968 { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
1969 { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
1970 { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
1971 { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
1972
1973 /* 802.11 UNI / HyperLan 2 */
1974 { 36, 0x00002c0c, 0x0000099a, 0x00098255, 0x000fea23 },
1975 { 40, 0x00002c0c, 0x000009a2, 0x00098255, 0x000fea03 },
1976 { 44, 0x00002c0c, 0x000009a6, 0x00098255, 0x000fea0b },
1977 { 48, 0x00002c0c, 0x000009aa, 0x00098255, 0x000fea13 },
1978 { 52, 0x00002c0c, 0x000009ae, 0x00098255, 0x000fea1b },
1979 { 56, 0x00002c0c, 0x000009b2, 0x00098255, 0x000fea23 },
1980 { 60, 0x00002c0c, 0x000009ba, 0x00098255, 0x000fea03 },
1981 { 64, 0x00002c0c, 0x000009be, 0x00098255, 0x000fea0b },
1982
1983 /* 802.11 HyperLan 2 */
1984 { 100, 0x00002c0c, 0x00000a2a, 0x000b8255, 0x000fea03 },
1985 { 104, 0x00002c0c, 0x00000a2e, 0x000b8255, 0x000fea0b },
1986 { 108, 0x00002c0c, 0x00000a32, 0x000b8255, 0x000fea13 },
1987 { 112, 0x00002c0c, 0x00000a36, 0x000b8255, 0x000fea1b },
1988 { 116, 0x00002c0c, 0x00000a3a, 0x000b8255, 0x000fea23 },
1989 { 120, 0x00002c0c, 0x00000a82, 0x000b8255, 0x000fea03 },
1990 { 124, 0x00002c0c, 0x00000a86, 0x000b8255, 0x000fea0b },
1991 { 128, 0x00002c0c, 0x00000a8a, 0x000b8255, 0x000fea13 },
1992 { 132, 0x00002c0c, 0x00000a8e, 0x000b8255, 0x000fea1b },
1993 { 136, 0x00002c0c, 0x00000a92, 0x000b8255, 0x000fea23 },
1994
1995 /* 802.11 UNII */
1996 { 140, 0x00002c0c, 0x00000a9a, 0x000b8255, 0x000fea03 },
1997 { 149, 0x00002c0c, 0x00000aa2, 0x000b8255, 0x000fea1f },
1998 { 153, 0x00002c0c, 0x00000aa6, 0x000b8255, 0x000fea27 },
1999 { 157, 0x00002c0c, 0x00000aae, 0x000b8255, 0x000fea07 },
2000 { 161, 0x00002c0c, 0x00000ab2, 0x000b8255, 0x000fea0f },
2001 { 165, 0x00002c0c, 0x00000ab6, 0x000b8255, 0x000fea17 },
2002
2003 /* MMAC(Japan)J52 ch 34,38,42,46 */
2004 { 34, 0x00002c0c, 0x0008099a, 0x000da255, 0x000d3a0b },
2005 { 38, 0x00002c0c, 0x0008099e, 0x000da255, 0x000d3a13 },
2006 { 42, 0x00002c0c, 0x000809a2, 0x000da255, 0x000d3a1b },
2007 { 46, 0x00002c0c, 0x000809a6, 0x000da255, 0x000d3a23 },
2008};
2009
2010/*
2011 * RF value list for RF5225 & RF2527
2012 * Supports: 2.4 GHz & 5.2 GHz
2013 */
2014static const struct rf_channel rf_vals_5225_2527[] = {
2015 { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
2016 { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
2017 { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
2018 { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
2019 { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
2020 { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
2021 { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
2022 { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
2023 { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
2024 { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
2025 { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
2026 { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
2027 { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
2028 { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
2029
2030 /* 802.11 UNI / HyperLan 2 */
2031 { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
2032 { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
2033 { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
2034 { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
2035 { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
2036 { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
2037 { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
2038 { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
2039
2040 /* 802.11 HyperLan 2 */
2041 { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
2042 { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
2043 { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
2044 { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
2045 { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
2046 { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
2047 { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
2048 { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
2049 { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
2050 { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
2051
2052 /* 802.11 UNII */
2053 { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
2054 { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
2055 { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
2056 { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
2057 { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
2058 { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
2059
2060 /* MMAC(Japan)J52 ch 34,38,42,46 */
2061 { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
2062 { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
2063 { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
2064 { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
2065};
2066
2067
8c5e7a5f 2068static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
95ea3627
ID
2069{
2070 struct hw_mode_spec *spec = &rt2x00dev->spec;
8c5e7a5f
ID
2071 struct channel_info *info;
2072 char *tx_power;
95ea3627
ID
2073 unsigned int i;
2074
2075 /*
2076 * Initialize all hw fields.
2077 */
2078 rt2x00dev->hw->flags =
566bfe5a 2079 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
4be8c387
JB
2080 IEEE80211_HW_SIGNAL_DBM |
2081 IEEE80211_HW_SUPPORTS_PS |
2082 IEEE80211_HW_PS_NULLFUNC_STACK;
95ea3627 2083 rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
95ea3627 2084
14a3bf89 2085 SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
95ea3627
ID
2086 SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
2087 rt2x00_eeprom_addr(rt2x00dev,
2088 EEPROM_MAC_ADDR_0));
2089
95ea3627
ID
2090 /*
2091 * Initialize hw_mode information.
2092 */
31562e80
ID
2093 spec->supported_bands = SUPPORT_BAND_2GHZ;
2094 spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
95ea3627
ID
2095
2096 if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
2097 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
2098 spec->channels = rf_vals_bg_2528;
2099 } else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) {
31562e80 2100 spec->supported_bands |= SUPPORT_BAND_5GHZ;
95ea3627
ID
2101 spec->num_channels = ARRAY_SIZE(rf_vals_5226);
2102 spec->channels = rf_vals_5226;
2103 } else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) {
2104 spec->num_channels = 14;
2105 spec->channels = rf_vals_5225_2527;
2106 } else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) {
31562e80 2107 spec->supported_bands |= SUPPORT_BAND_5GHZ;
95ea3627
ID
2108 spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527);
2109 spec->channels = rf_vals_5225_2527;
2110 }
2111
8c5e7a5f
ID
2112 /*
2113 * Create channel information array
2114 */
2115 info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
2116 if (!info)
2117 return -ENOMEM;
95ea3627 2118
8c5e7a5f
ID
2119 spec->channels_info = info;
2120
2121 tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
2122 for (i = 0; i < 14; i++)
2123 info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
2124
2125 if (spec->num_channels > 14) {
2126 tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
2127 for (i = 14; i < spec->num_channels; i++)
2128 info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
95ea3627 2129 }
8c5e7a5f
ID
2130
2131 return 0;
95ea3627
ID
2132}
2133
2134static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
2135{
2136 int retval;
2137
2138 /*
2139 * Allocate eeprom data.
2140 */
2141 retval = rt73usb_validate_eeprom(rt2x00dev);
2142 if (retval)
2143 return retval;
2144
2145 retval = rt73usb_init_eeprom(rt2x00dev);
2146 if (retval)
2147 return retval;
2148
2149 /*
2150 * Initialize hw specifications.
2151 */
8c5e7a5f
ID
2152 retval = rt73usb_probe_hw_mode(rt2x00dev);
2153 if (retval)
2154 return retval;
95ea3627
ID
2155
2156 /*
9404ef34 2157 * This device requires firmware.
95ea3627 2158 */
066cb637 2159 __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
3a643d24 2160 __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
008c4482
ID
2161 if (!modparam_nohwcrypt)
2162 __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
95ea3627
ID
2163
2164 /*
2165 * Set the rssi offset.
2166 */
2167 rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
2168
2169 return 0;
2170}
2171
2172/*
2173 * IEEE80211 stack callback functions.
2174 */
2af0a570
ID
2175static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
2176 const struct ieee80211_tx_queue_params *params)
2177{
2178 struct rt2x00_dev *rt2x00dev = hw->priv;
2179 struct data_queue *queue;
2180 struct rt2x00_field32 field;
2181 int retval;
2182 u32 reg;
2183
2184 /*
2185 * First pass the configuration through rt2x00lib, that will
2186 * update the queue settings and validate the input. After that
2187 * we are free to update the registers based on the value
2188 * in the queue parameter.
2189 */
2190 retval = rt2x00mac_conf_tx(hw, queue_idx, params);
2191 if (retval)
2192 return retval;
2193
2194 queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
2195
2196 /* Update WMM TXOP register */
2197 if (queue_idx < 2) {
2198 field.bit_offset = queue_idx * 16;
2199 field.bit_mask = 0xffff << field.bit_offset;
2200
0f829b1d 2201 rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
2af0a570 2202 rt2x00_set_field32(&reg, field, queue->txop);
0f829b1d 2203 rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
2af0a570
ID
2204 } else if (queue_idx < 4) {
2205 field.bit_offset = (queue_idx - 2) * 16;
2206 field.bit_mask = 0xffff << field.bit_offset;
2207
0f829b1d 2208 rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
2af0a570 2209 rt2x00_set_field32(&reg, field, queue->txop);
0f829b1d 2210 rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
2af0a570
ID
2211 }
2212
2213 /* Update WMM registers */
2214 field.bit_offset = queue_idx * 4;
2215 field.bit_mask = 0xf << field.bit_offset;
2216
0f829b1d 2217 rt2x00usb_register_read(rt2x00dev, AIFSN_CSR, &reg);
2af0a570 2218 rt2x00_set_field32(&reg, field, queue->aifs);
0f829b1d 2219 rt2x00usb_register_write(rt2x00dev, AIFSN_CSR, reg);
2af0a570 2220
0f829b1d 2221 rt2x00usb_register_read(rt2x00dev, CWMIN_CSR, &reg);
2af0a570 2222 rt2x00_set_field32(&reg, field, queue->cw_min);
0f829b1d 2223 rt2x00usb_register_write(rt2x00dev, CWMIN_CSR, reg);
2af0a570 2224
0f829b1d 2225 rt2x00usb_register_read(rt2x00dev, CWMAX_CSR, &reg);
2af0a570 2226 rt2x00_set_field32(&reg, field, queue->cw_max);
0f829b1d 2227 rt2x00usb_register_write(rt2x00dev, CWMAX_CSR, reg);
2af0a570
ID
2228
2229 return 0;
2230}
2231
95ea3627
ID
2232#if 0
2233/*
2234 * Mac80211 demands get_tsf must be atomic.
2235 * This is not possible for rt73usb since all register access
2236 * functions require sleeping. Untill mac80211 no longer needs
2237 * get_tsf to be atomic, this function should be disabled.
2238 */
2239static u64 rt73usb_get_tsf(struct ieee80211_hw *hw)
2240{
2241 struct rt2x00_dev *rt2x00dev = hw->priv;
2242 u64 tsf;
2243 u32 reg;
2244
0f829b1d 2245 rt2x00usb_register_read(rt2x00dev, TXRX_CSR13, &reg);
95ea3627 2246 tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
0f829b1d 2247 rt2x00usb_register_read(rt2x00dev, TXRX_CSR12, &reg);
95ea3627
ID
2248 tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
2249
2250 return tsf;
2251}
37894473
ID
2252#else
2253#define rt73usb_get_tsf NULL
95ea3627
ID
2254#endif
2255
95ea3627
ID
2256static const struct ieee80211_ops rt73usb_mac80211_ops = {
2257 .tx = rt2x00mac_tx,
4150c572
JB
2258 .start = rt2x00mac_start,
2259 .stop = rt2x00mac_stop,
95ea3627
ID
2260 .add_interface = rt2x00mac_add_interface,
2261 .remove_interface = rt2x00mac_remove_interface,
2262 .config = rt2x00mac_config,
2263 .config_interface = rt2x00mac_config_interface,
3a643d24 2264 .configure_filter = rt2x00mac_configure_filter,
906c110f 2265 .set_key = rt2x00mac_set_key,
95ea3627 2266 .get_stats = rt2x00mac_get_stats,
471b3efd 2267 .bss_info_changed = rt2x00mac_bss_info_changed,
2af0a570 2268 .conf_tx = rt73usb_conf_tx,
95ea3627 2269 .get_tx_stats = rt2x00mac_get_tx_stats,
95ea3627 2270 .get_tsf = rt73usb_get_tsf,
95ea3627
ID
2271};
2272
2273static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
2274 .probe_hw = rt73usb_probe_hw,
2275 .get_firmware_name = rt73usb_get_firmware_name,
a7f3a06c 2276 .get_firmware_crc = rt73usb_get_firmware_crc,
95ea3627
ID
2277 .load_firmware = rt73usb_load_firmware,
2278 .initialize = rt2x00usb_initialize,
2279 .uninitialize = rt2x00usb_uninitialize,
798b7adb 2280 .clear_entry = rt2x00usb_clear_entry,
95ea3627 2281 .set_device_state = rt73usb_set_device_state,
7396faf4 2282 .rfkill_poll = rt73usb_rfkill_poll,
95ea3627
ID
2283 .link_stats = rt73usb_link_stats,
2284 .reset_tuner = rt73usb_reset_tuner,
2285 .link_tuner = rt73usb_link_tuner,
2286 .write_tx_desc = rt73usb_write_tx_desc,
2287 .write_tx_data = rt2x00usb_write_tx_data,
bd88a781 2288 .write_beacon = rt73usb_write_beacon,
dd9fa2d2 2289 .get_tx_data_len = rt73usb_get_tx_data_len,
95ea3627
ID
2290 .kick_tx_queue = rt73usb_kick_tx_queue,
2291 .fill_rxdone = rt73usb_fill_rxdone,
906c110f
ID
2292 .config_shared_key = rt73usb_config_shared_key,
2293 .config_pairwise_key = rt73usb_config_pairwise_key,
3a643d24 2294 .config_filter = rt73usb_config_filter,
6bb40dd1 2295 .config_intf = rt73usb_config_intf,
72810379 2296 .config_erp = rt73usb_config_erp,
e4ea1c40 2297 .config_ant = rt73usb_config_ant,
95ea3627
ID
2298 .config = rt73usb_config,
2299};
2300
181d6902
ID
2301static const struct data_queue_desc rt73usb_queue_rx = {
2302 .entry_num = RX_ENTRIES,
2303 .data_size = DATA_FRAME_SIZE,
2304 .desc_size = RXD_DESC_SIZE,
b8be63ff 2305 .priv_size = sizeof(struct queue_entry_priv_usb),
181d6902
ID
2306};
2307
2308static const struct data_queue_desc rt73usb_queue_tx = {
2309 .entry_num = TX_ENTRIES,
2310 .data_size = DATA_FRAME_SIZE,
2311 .desc_size = TXD_DESC_SIZE,
b8be63ff 2312 .priv_size = sizeof(struct queue_entry_priv_usb),
181d6902
ID
2313};
2314
2315static const struct data_queue_desc rt73usb_queue_bcn = {
6bb40dd1 2316 .entry_num = 4 * BEACON_ENTRIES,
181d6902
ID
2317 .data_size = MGMT_FRAME_SIZE,
2318 .desc_size = TXINFO_SIZE,
b8be63ff 2319 .priv_size = sizeof(struct queue_entry_priv_usb),
181d6902
ID
2320};
2321
95ea3627 2322static const struct rt2x00_ops rt73usb_ops = {
2360157c 2323 .name = KBUILD_MODNAME,
6bb40dd1
ID
2324 .max_sta_intf = 1,
2325 .max_ap_intf = 4,
95ea3627
ID
2326 .eeprom_size = EEPROM_SIZE,
2327 .rf_size = RF_SIZE,
61448f88 2328 .tx_queues = NUM_TX_QUEUES,
181d6902
ID
2329 .rx = &rt73usb_queue_rx,
2330 .tx = &rt73usb_queue_tx,
2331 .bcn = &rt73usb_queue_bcn,
95ea3627
ID
2332 .lib = &rt73usb_rt2x00_ops,
2333 .hw = &rt73usb_mac80211_ops,
2334#ifdef CONFIG_RT2X00_LIB_DEBUGFS
2335 .debugfs = &rt73usb_rt2x00debug,
2336#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
2337};
2338
2339/*
2340 * rt73usb module information.
2341 */
2342static struct usb_device_id rt73usb_device_table[] = {
2343 /* AboCom */
2344 { USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
2345 /* Askey */
2346 { USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
2347 /* ASUS */
2348 { USB_DEVICE(0x0b05, 0x1723), USB_DEVICE_DATA(&rt73usb_ops) },
2349 { USB_DEVICE(0x0b05, 0x1724), USB_DEVICE_DATA(&rt73usb_ops) },
2350 /* Belkin */
2351 { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) },
2352 { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) },
2353 { USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) },
1f06862e 2354 { USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
95ea3627
ID
2355 /* Billionton */
2356 { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
2357 /* Buffalo */
2358 { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
2359 /* CNet */
2360 { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
2361 { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
2362 /* Conceptronic */
2363 { USB_DEVICE(0x14b2, 0x3c22), USB_DEVICE_DATA(&rt73usb_ops) },
0a74892b
MM
2364 /* Corega */
2365 { USB_DEVICE(0x07aa, 0x002e), USB_DEVICE_DATA(&rt73usb_ops) },
95ea3627
ID
2366 /* D-Link */
2367 { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
2368 { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
cb62eccd 2369 { USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
445815d7 2370 { USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
95ea3627
ID
2371 /* Gemtek */
2372 { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
2373 /* Gigabyte */
2374 { USB_DEVICE(0x1044, 0x8008), USB_DEVICE_DATA(&rt73usb_ops) },
2375 { USB_DEVICE(0x1044, 0x800a), USB_DEVICE_DATA(&rt73usb_ops) },
2376 /* Huawei-3Com */
2377 { USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) },
2378 /* Hercules */
2379 { USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) },
2380 { USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) },
2381 /* Linksys */
2382 { USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) },
2383 { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
3be36ae2 2384 { USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) },
95ea3627
ID
2385 /* MSI */
2386 { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
2387 { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
2388 { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
2389 { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
2390 /* Ralink */
2391 { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
2392 { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
2393 /* Qcom */
2394 { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
2395 { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
2396 { USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
2397 /* Senao */
2398 { USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
2399 /* Sitecom */
2400 { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
2401 { USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
2402 /* Surecom */
2403 { USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
2404 /* Planex */
2405 { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
2406 { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
2407 { 0, }
2408};
2409
2410MODULE_AUTHOR(DRV_PROJECT);
2411MODULE_VERSION(DRV_VERSION);
2412MODULE_DESCRIPTION("Ralink RT73 USB Wireless LAN driver.");
2413MODULE_SUPPORTED_DEVICE("Ralink RT2571W & RT2671 USB chipset based cards");
2414MODULE_DEVICE_TABLE(usb, rt73usb_device_table);
2415MODULE_FIRMWARE(FIRMWARE_RT2571);
2416MODULE_LICENSE("GPL");
2417
2418static struct usb_driver rt73usb_driver = {
2360157c 2419 .name = KBUILD_MODNAME,
95ea3627
ID
2420 .id_table = rt73usb_device_table,
2421 .probe = rt2x00usb_probe,
2422 .disconnect = rt2x00usb_disconnect,
2423 .suspend = rt2x00usb_suspend,
2424 .resume = rt2x00usb_resume,
2425};
2426
2427static int __init rt73usb_init(void)
2428{
2429 return usb_register(&rt73usb_driver);
2430}
2431
2432static void __exit rt73usb_exit(void)
2433{
2434 usb_deregister(&rt73usb_driver);
2435}
2436
2437module_init(rt73usb_init);
2438module_exit(rt73usb_exit);
This page took 0.47225 seconds and 5 git commands to generate.