Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
[deliverable/linux.git] / drivers / net / yellowfin.c
CommitLineData
1da177e4
LT
1/* yellowfin.c: A Packet Engines G-NIC ethernet driver for linux. */
2/*
3 Written 1997-2001 by Donald Becker.
4
5 This software may be used and distributed according to the terms of
6 the GNU General Public License (GPL), incorporated herein by reference.
7 Drivers based on or derived from this code fall under the GPL and must
8 retain the authorship, copyright and license notice. This file is not
9 a complete program and may only be used when the entire operating
10 system is licensed under the GPL.
11
12 This driver is for the Packet Engines G-NIC PCI Gigabit Ethernet adapter.
13 It also supports the Symbios Logic version of the same chip core.
14
15 The author may be reached as becker@scyld.com, or C/O
16 Scyld Computing Corporation
17 410 Severn Ave., Suite 210
18 Annapolis MD 21403
19
20 Support and updates available at
21 http://www.scyld.com/network/yellowfin.html
03a8c661 22 [link no longer provides useful info -jgarzik]
1da177e4 23
1da177e4
LT
24*/
25
26#define DRV_NAME "yellowfin"
d5b20697
AG
27#define DRV_VERSION "2.1"
28#define DRV_RELDATE "Sep 11, 2006"
1da177e4
LT
29
30#define PFX DRV_NAME ": "
31
32/* The user-configurable values.
33 These may be modified when a driver module is loaded.*/
34
35static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
36/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
37static int max_interrupt_work = 20;
38static int mtu;
39#ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */
40/* System-wide count of bogus-rx frames. */
41static int bogus_rx;
42static int dma_ctrl = 0x004A0263; /* Constrained by errata */
43static int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */
44#elif defined(YF_NEW) /* A future perfect board :->. */
45static int dma_ctrl = 0x00CAC277; /* Override when loading module! */
46static int fifo_cfg = 0x0028;
47#else
f71e1309
AV
48static const int dma_ctrl = 0x004A0263; /* Constrained by errata */
49static const int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */
1da177e4
LT
50#endif
51
52/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
53 Setting to > 1514 effectively disables this feature. */
54static int rx_copybreak;
55
56/* Used to pass the media type, etc.
57 No media types are currently defined. These exist for driver
58 interoperability.
59*/
60#define MAX_UNITS 8 /* More are supported, limit only on options */
61static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
62static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
63
64/* Do ugly workaround for GX server chipset errata. */
65static int gx_fix;
66
67/* Operational parameters that are set at compile time. */
68
69/* Keep the ring sizes a power of two for efficiency.
70 Making the Tx ring too long decreases the effectiveness of channel
71 bonding and packet priority.
72 There are no ill effects from too-large receive rings. */
73#define TX_RING_SIZE 16
74#define TX_QUEUE_SIZE 12 /* Must be > 4 && <= TX_RING_SIZE */
75#define RX_RING_SIZE 64
76#define STATUS_TOTAL_SIZE TX_RING_SIZE*sizeof(struct tx_status_words)
77#define TX_TOTAL_SIZE 2*TX_RING_SIZE*sizeof(struct yellowfin_desc)
78#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct yellowfin_desc)
79
80/* Operational parameters that usually are not changed. */
81/* Time in jiffies before concluding the transmitter is hung. */
82#define TX_TIMEOUT (2*HZ)
83#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
84
85#define yellowfin_debug debug
86
87#include <linux/module.h>
88#include <linux/kernel.h>
89#include <linux/string.h>
90#include <linux/timer.h>
91#include <linux/errno.h>
92#include <linux/ioport.h>
93#include <linux/slab.h>
94#include <linux/interrupt.h>
95#include <linux/pci.h>
96#include <linux/init.h>
97#include <linux/mii.h>
98#include <linux/netdevice.h>
99#include <linux/etherdevice.h>
100#include <linux/skbuff.h>
101#include <linux/ethtool.h>
102#include <linux/crc32.h>
103#include <linux/bitops.h>
104#include <asm/uaccess.h>
105#include <asm/processor.h> /* Processor type for cache alignment. */
106#include <asm/unaligned.h>
107#include <asm/io.h>
108
109/* These identify the driver base version and may not be removed. */
110static char version[] __devinitdata =
111KERN_INFO DRV_NAME ".c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>\n"
1da177e4
LT
112KERN_INFO " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
113
114MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
115MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver");
116MODULE_LICENSE("GPL");
117
118module_param(max_interrupt_work, int, 0);
119module_param(mtu, int, 0);
120module_param(debug, int, 0);
121module_param(rx_copybreak, int, 0);
122module_param_array(options, int, NULL, 0);
123module_param_array(full_duplex, int, NULL, 0);
124module_param(gx_fix, int, 0);
125MODULE_PARM_DESC(max_interrupt_work, "G-NIC maximum events handled per interrupt");
126MODULE_PARM_DESC(mtu, "G-NIC MTU (all boards)");
127MODULE_PARM_DESC(debug, "G-NIC debug level (0-7)");
128MODULE_PARM_DESC(rx_copybreak, "G-NIC copy breakpoint for copy-only-tiny-frames");
129MODULE_PARM_DESC(options, "G-NIC: Bits 0-3: media type, bit 17: full duplex");
130MODULE_PARM_DESC(full_duplex, "G-NIC full duplex setting(s) (1)");
131MODULE_PARM_DESC(gx_fix, "G-NIC: enable GX server chipset bug workaround (0-1)");
132
133/*
134 Theory of Operation
135
136I. Board Compatibility
137
138This device driver is designed for the Packet Engines "Yellowfin" Gigabit
6aa20a22 139Ethernet adapter. The G-NIC 64-bit PCI card is supported, as well as the
1da177e4
LT
140Symbios 53C885E dual function chip.
141
142II. Board-specific settings
143
144PCI bus devices are configured by the system at boot time, so no jumpers
145need to be set on the board. The system BIOS preferably should assign the
146PCI INTA signal to an otherwise unused system IRQ line.
147Note: Kernel versions earlier than 1.3.73 do not support shared PCI
148interrupt lines.
149
150III. Driver operation
151
152IIIa. Ring buffers
153
154The Yellowfin uses the Descriptor Based DMA Architecture specified by Apple.
155This is a descriptor list scheme similar to that used by the EEPro100 and
156Tulip. This driver uses two statically allocated fixed-size descriptor lists
157formed into rings by a branch from the final descriptor to the beginning of
158the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
159
160The driver allocates full frame size skbuffs for the Rx ring buffers at
161open() time and passes the skb->data field to the Yellowfin as receive data
162buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
163a fresh skbuff is allocated and the frame is copied to the new skbuff.
164When the incoming frame is larger, the skbuff is passed directly up the
165protocol stack and replaced by a newly allocated skbuff.
166
167The RX_COPYBREAK value is chosen to trade-off the memory wasted by
168using a full-sized skbuff for small frames vs. the copying costs of larger
169frames. For small frames the copying cost is negligible (esp. considering
170that we are pre-loading the cache with immediately useful header
171information). For large frames the copying cost is non-trivial, and the
172larger copy might flush the cache of useful data.
173
174IIIC. Synchronization
175
176The driver runs as two independent, single-threaded flows of control. One
177is the send-packet routine, which enforces single-threaded use by the
178dev->tbusy flag. The other thread is the interrupt handler, which is single
179threaded by the hardware and other software.
180
181The send packet thread has partial control over the Tx ring and 'dev->tbusy'
182flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next
183queue slot is empty, it clears the tbusy flag when finished otherwise it sets
184the 'yp->tx_full' flag.
185
186The interrupt handler has exclusive control over the Rx ring and records stats
187from the Tx ring. After reaping the stats, it marks the Tx queue entry as
188empty by incrementing the dirty_tx mark. Iff the 'yp->tx_full' flag is set, it
189clears both the tx_full and tbusy flags.
190
191IV. Notes
192
193Thanks to Kim Stearns of Packet Engines for providing a pair of G-NIC boards.
194Thanks to Bruce Faust of Digitalscape for providing both their SYM53C885 board
195and an AlphaStation to verifty the Alpha port!
196
197IVb. References
198
199Yellowfin Engineering Design Specification, 4/23/97 Preliminary/Confidential
200Symbios SYM53C885 PCI-SCSI/Fast Ethernet Multifunction Controller Preliminary
201 Data Manual v3.0
202http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
203http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html
204
205IVc. Errata
206
207See Packet Engines confidential appendix (prototype chips only).
208*/
209
6aa20a22 210
1da177e4 211
1da177e4
LT
212enum capability_flags {
213 HasMII=1, FullTxStatus=2, IsGigabit=4, HasMulticastBug=8, FullRxStatus=16,
214 HasMACAddrBug=32, /* Only on early revs. */
215 DontUseEeprom=64, /* Don't read the MAC from the EEPROm. */
216};
c3d8e682 217
1da177e4 218/* The PCI I/O space extent. */
c3d8e682
JG
219enum {
220 YELLOWFIN_SIZE = 0x100,
221};
1da177e4
LT
222
223struct pci_id_info {
224 const char *name;
225 struct match_info {
226 int pci, pci_mask, subsystem, subsystem_mask;
227 int revision, revision_mask; /* Only 8 bits. */
228 } id;
1da177e4
LT
229 int drv_flags; /* Driver use, intended as capability flags. */
230};
231
f71e1309 232static const struct pci_id_info pci_id_tbl[] = {
1da177e4 233 {"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff},
1da177e4
LT
234 FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom},
235 {"Symbios SYM83C885", { 0x07011000, 0xffffffff},
c3d8e682 236 HasMII | DontUseEeprom },
1f1bd5fc 237 { }
1da177e4
LT
238};
239
1f1bd5fc 240static const struct pci_device_id yellowfin_pci_tbl[] = {
1da177e4
LT
241 { 0x1000, 0x0702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
242 { 0x1000, 0x0701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
1f1bd5fc 243 { }
1da177e4
LT
244};
245MODULE_DEVICE_TABLE (pci, yellowfin_pci_tbl);
246
247
248/* Offsets to the Yellowfin registers. Various sizes and alignments. */
249enum yellowfin_offsets {
250 TxCtrl=0x00, TxStatus=0x04, TxPtr=0x0C,
251 TxIntrSel=0x10, TxBranchSel=0x14, TxWaitSel=0x18,
252 RxCtrl=0x40, RxStatus=0x44, RxPtr=0x4C,
253 RxIntrSel=0x50, RxBranchSel=0x54, RxWaitSel=0x58,
254 EventStatus=0x80, IntrEnb=0x82, IntrClear=0x84, IntrStatus=0x86,
255 ChipRev=0x8C, DMACtrl=0x90, TxThreshold=0x94,
256 Cnfg=0xA0, FrameGap0=0xA2, FrameGap1=0xA4,
257 MII_Cmd=0xA6, MII_Addr=0xA8, MII_Wr_Data=0xAA, MII_Rd_Data=0xAC,
258 MII_Status=0xAE,
259 RxDepth=0xB8, FlowCtrl=0xBC,
260 AddrMode=0xD0, StnAddr=0xD2, HashTbl=0xD8, FIFOcfg=0xF8,
261 EEStatus=0xF0, EECtrl=0xF1, EEAddr=0xF2, EERead=0xF3, EEWrite=0xF4,
262 EEFeature=0xF5,
263};
264
265/* The Yellowfin Rx and Tx buffer descriptors.
266 Elements are written as 32 bit for endian portability. */
267struct yellowfin_desc {
e5a31421
AV
268 __le32 dbdma_cmd;
269 __le32 addr;
270 __le32 branch_addr;
271 __le32 result_status;
1da177e4
LT
272};
273
274struct tx_status_words {
275#ifdef __BIG_ENDIAN
276 u16 tx_errs;
277 u16 tx_cnt;
278 u16 paused;
279 u16 total_tx_cnt;
280#else /* Little endian chips. */
281 u16 tx_cnt;
282 u16 tx_errs;
283 u16 total_tx_cnt;
284 u16 paused;
285#endif /* __BIG_ENDIAN */
286};
287
288/* Bits in yellowfin_desc.cmd */
289enum desc_cmd_bits {
290 CMD_TX_PKT=0x10000000, CMD_RX_BUF=0x20000000, CMD_TXSTATUS=0x30000000,
291 CMD_NOP=0x60000000, CMD_STOP=0x70000000,
292 BRANCH_ALWAYS=0x0C0000, INTR_ALWAYS=0x300000, WAIT_ALWAYS=0x030000,
293 BRANCH_IFTRUE=0x040000,
294};
295
296/* Bits in yellowfin_desc.status */
297enum desc_status_bits { RX_EOP=0x0040, };
298
299/* Bits in the interrupt status/mask registers. */
300enum intr_status_bits {
301 IntrRxDone=0x01, IntrRxInvalid=0x02, IntrRxPCIFault=0x04,IntrRxPCIErr=0x08,
302 IntrTxDone=0x10, IntrTxInvalid=0x20, IntrTxPCIFault=0x40,IntrTxPCIErr=0x80,
303 IntrEarlyRx=0x100, IntrWakeup=0x200, };
304
305#define PRIV_ALIGN 31 /* Required alignment mask */
306#define MII_CNT 4
307struct yellowfin_private {
308 /* Descriptor rings first for alignment.
309 Tx requires a second descriptor for status. */
310 struct yellowfin_desc *rx_ring;
311 struct yellowfin_desc *tx_ring;
312 struct sk_buff* rx_skbuff[RX_RING_SIZE];
313 struct sk_buff* tx_skbuff[TX_RING_SIZE];
314 dma_addr_t rx_ring_dma;
315 dma_addr_t tx_ring_dma;
316
317 struct tx_status_words *tx_status;
318 dma_addr_t tx_status_dma;
319
320 struct timer_list timer; /* Media selection timer. */
1da177e4
LT
321 /* Frequently used and paired value: keep adjacent for cache effect. */
322 int chip_id, drv_flags;
323 struct pci_dev *pci_dev;
324 unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
325 unsigned int rx_buf_sz; /* Based on MTU+slack. */
326 struct tx_status_words *tx_tail_desc;
327 unsigned int cur_tx, dirty_tx;
328 int tx_threshold;
329 unsigned int tx_full:1; /* The Tx queue is full. */
330 unsigned int full_duplex:1; /* Full-duplex operation requested. */
331 unsigned int duplex_lock:1;
332 unsigned int medialock:1; /* Do not sense media. */
333 unsigned int default_port:4; /* Last dev->if_port value. */
334 /* MII transceiver section. */
335 int mii_cnt; /* MII device addresses. */
336 u16 advertising; /* NWay media advertisement */
337 unsigned char phys[MII_CNT]; /* MII device addresses, only first one used */
338 spinlock_t lock;
339 void __iomem *base;
340};
341
342static int read_eeprom(void __iomem *ioaddr, int location);
343static int mdio_read(void __iomem *ioaddr, int phy_id, int location);
344static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value);
345static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
346static int yellowfin_open(struct net_device *dev);
347static void yellowfin_timer(unsigned long data);
348static void yellowfin_tx_timeout(struct net_device *dev);
349static void yellowfin_init_ring(struct net_device *dev);
350static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev);
7d12e780 351static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance);
1da177e4
LT
352static int yellowfin_rx(struct net_device *dev);
353static void yellowfin_error(struct net_device *dev, int intr_status);
354static int yellowfin_close(struct net_device *dev);
1da177e4 355static void set_rx_mode(struct net_device *dev);
7282d491 356static const struct ethtool_ops ethtool_ops;
1da177e4 357
bfd82c35
SH
358static const struct net_device_ops netdev_ops = {
359 .ndo_open = yellowfin_open,
360 .ndo_stop = yellowfin_close,
361 .ndo_start_xmit = yellowfin_start_xmit,
362 .ndo_set_multicast_list = set_rx_mode,
363 .ndo_change_mtu = eth_change_mtu,
364 .ndo_validate_addr = eth_validate_addr,
365 .ndo_do_ioctl = netdev_ioctl,
366 .ndo_tx_timeout = yellowfin_tx_timeout,
367};
1da177e4
LT
368
369static int __devinit yellowfin_init_one(struct pci_dev *pdev,
370 const struct pci_device_id *ent)
371{
372 struct net_device *dev;
373 struct yellowfin_private *np;
374 int irq;
375 int chip_idx = ent->driver_data;
376 static int find_cnt;
377 void __iomem *ioaddr;
378 int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
379 int drv_flags = pci_id_tbl[chip_idx].drv_flags;
380 void *ring_space;
381 dma_addr_t ring_dma;
382#ifdef USE_IO_OPS
383 int bar = 0;
384#else
385 int bar = 1;
386#endif
6aa20a22 387
1da177e4
LT
388/* when built into the kernel, we only print version if device is found */
389#ifndef MODULE
390 static int printed_version;
391 if (!printed_version++)
392 printk(version);
393#endif
394
395 i = pci_enable_device(pdev);
396 if (i) return i;
397
398 dev = alloc_etherdev(sizeof(*np));
399 if (!dev) {
400 printk (KERN_ERR PFX "cannot allocate ethernet device\n");
401 return -ENOMEM;
402 }
1da177e4
LT
403 SET_NETDEV_DEV(dev, &pdev->dev);
404
405 np = netdev_priv(dev);
406
407 if (pci_request_regions(pdev, DRV_NAME))
408 goto err_out_free_netdev;
409
410 pci_set_master (pdev);
411
412 ioaddr = pci_iomap(pdev, bar, YELLOWFIN_SIZE);
413 if (!ioaddr)
414 goto err_out_free_res;
415
416 irq = pdev->irq;
417
418 if (drv_flags & DontUseEeprom)
419 for (i = 0; i < 6; i++)
420 dev->dev_addr[i] = ioread8(ioaddr + StnAddr + i);
421 else {
422 int ee_offset = (read_eeprom(ioaddr, 6) == 0xff ? 0x100 : 0);
423 for (i = 0; i < 6; i++)
424 dev->dev_addr[i] = read_eeprom(ioaddr, ee_offset + i);
425 }
426
427 /* Reset the chip. */
428 iowrite32(0x80000000, ioaddr + DMACtrl);
429
430 dev->base_addr = (unsigned long)ioaddr;
431 dev->irq = irq;
432
433 pci_set_drvdata(pdev, dev);
434 spin_lock_init(&np->lock);
435
436 np->pci_dev = pdev;
437 np->chip_id = chip_idx;
438 np->drv_flags = drv_flags;
439 np->base = ioaddr;
440
441 ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
442 if (!ring_space)
443 goto err_out_cleardev;
444 np->tx_ring = (struct yellowfin_desc *)ring_space;
445 np->tx_ring_dma = ring_dma;
446
447 ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
448 if (!ring_space)
449 goto err_out_unmap_tx;
450 np->rx_ring = (struct yellowfin_desc *)ring_space;
451 np->rx_ring_dma = ring_dma;
452
453 ring_space = pci_alloc_consistent(pdev, STATUS_TOTAL_SIZE, &ring_dma);
454 if (!ring_space)
455 goto err_out_unmap_rx;
456 np->tx_status = (struct tx_status_words *)ring_space;
457 np->tx_status_dma = ring_dma;
458
459 if (dev->mem_start)
460 option = dev->mem_start;
461
462 /* The lower four bits are the media type. */
463 if (option > 0) {
464 if (option & 0x200)
465 np->full_duplex = 1;
466 np->default_port = option & 15;
467 if (np->default_port)
468 np->medialock = 1;
469 }
470 if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0)
471 np->full_duplex = 1;
472
473 if (np->full_duplex)
474 np->duplex_lock = 1;
475
476 /* The Yellowfin-specific entries in the device structure. */
bfd82c35 477 dev->netdev_ops = &netdev_ops;
1da177e4 478 SET_ETHTOOL_OPS(dev, &ethtool_ops);
1da177e4
LT
479 dev->watchdog_timeo = TX_TIMEOUT;
480
481 if (mtu)
482 dev->mtu = mtu;
483
484 i = register_netdev(dev);
485 if (i)
486 goto err_out_unmap_status;
487
e174961c 488 printk(KERN_INFO "%s: %s type %8x at %p, %pM, IRQ %d.\n",
1da177e4 489 dev->name, pci_id_tbl[chip_idx].name,
0795af57 490 ioread32(ioaddr + ChipRev), ioaddr,
e174961c 491 dev->dev_addr, irq);
1da177e4
LT
492
493 if (np->drv_flags & HasMII) {
494 int phy, phy_idx = 0;
495 for (phy = 0; phy < 32 && phy_idx < MII_CNT; phy++) {
496 int mii_status = mdio_read(ioaddr, phy, 1);
497 if (mii_status != 0xffff && mii_status != 0x0000) {
498 np->phys[phy_idx++] = phy;
499 np->advertising = mdio_read(ioaddr, phy, 4);
500 printk(KERN_INFO "%s: MII PHY found at address %d, status "
501 "0x%4.4x advertising %4.4x.\n",
502 dev->name, phy, mii_status, np->advertising);
503 }
504 }
505 np->mii_cnt = phy_idx;
506 }
507
508 find_cnt++;
6aa20a22 509
1da177e4
LT
510 return 0;
511
512err_out_unmap_status:
6aa20a22 513 pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status,
1da177e4
LT
514 np->tx_status_dma);
515err_out_unmap_rx:
516 pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
517err_out_unmap_tx:
518 pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
519err_out_cleardev:
520 pci_set_drvdata(pdev, NULL);
521 pci_iounmap(pdev, ioaddr);
522err_out_free_res:
523 pci_release_regions(pdev);
524err_out_free_netdev:
525 free_netdev (dev);
526 return -ENODEV;
527}
528
529static int __devinit read_eeprom(void __iomem *ioaddr, int location)
530{
531 int bogus_cnt = 10000; /* Typical 33Mhz: 1050 ticks */
532
533 iowrite8(location, ioaddr + EEAddr);
534 iowrite8(0x30 | ((location >> 8) & 7), ioaddr + EECtrl);
535 while ((ioread8(ioaddr + EEStatus) & 0x80) && --bogus_cnt > 0)
536 ;
537 return ioread8(ioaddr + EERead);
538}
539
540/* MII Managemen Data I/O accesses.
541 These routines assume the MDIO controller is idle, and do not exit until
542 the command is finished. */
543
544static int mdio_read(void __iomem *ioaddr, int phy_id, int location)
545{
546 int i;
547
548 iowrite16((phy_id<<8) + location, ioaddr + MII_Addr);
549 iowrite16(1, ioaddr + MII_Cmd);
550 for (i = 10000; i >= 0; i--)
551 if ((ioread16(ioaddr + MII_Status) & 1) == 0)
552 break;
553 return ioread16(ioaddr + MII_Rd_Data);
554}
555
556static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value)
557{
558 int i;
559
560 iowrite16((phy_id<<8) + location, ioaddr + MII_Addr);
561 iowrite16(value, ioaddr + MII_Wr_Data);
562
563 /* Wait for the command to finish. */
564 for (i = 10000; i >= 0; i--)
565 if ((ioread16(ioaddr + MII_Status) & 1) == 0)
566 break;
567 return;
568}
569
6aa20a22 570
1da177e4
LT
571static int yellowfin_open(struct net_device *dev)
572{
573 struct yellowfin_private *yp = netdev_priv(dev);
574 void __iomem *ioaddr = yp->base;
575 int i;
576
577 /* Reset the chip. */
578 iowrite32(0x80000000, ioaddr + DMACtrl);
579
1fb9df5d 580 i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
1da177e4
LT
581 if (i) return i;
582
583 if (yellowfin_debug > 1)
584 printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n",
585 dev->name, dev->irq);
586
587 yellowfin_init_ring(dev);
588
589 iowrite32(yp->rx_ring_dma, ioaddr + RxPtr);
590 iowrite32(yp->tx_ring_dma, ioaddr + TxPtr);
591
592 for (i = 0; i < 6; i++)
593 iowrite8(dev->dev_addr[i], ioaddr + StnAddr + i);
594
595 /* Set up various condition 'select' registers.
596 There are no options here. */
597 iowrite32(0x00800080, ioaddr + TxIntrSel); /* Interrupt on Tx abort */
598 iowrite32(0x00800080, ioaddr + TxBranchSel); /* Branch on Tx abort */
599 iowrite32(0x00400040, ioaddr + TxWaitSel); /* Wait on Tx status */
600 iowrite32(0x00400040, ioaddr + RxIntrSel); /* Interrupt on Rx done */
601 iowrite32(0x00400040, ioaddr + RxBranchSel); /* Branch on Rx error */
602 iowrite32(0x00400040, ioaddr + RxWaitSel); /* Wait on Rx done */
603
604 /* Initialize other registers: with so many this eventually this will
605 converted to an offset/value list. */
606 iowrite32(dma_ctrl, ioaddr + DMACtrl);
607 iowrite16(fifo_cfg, ioaddr + FIFOcfg);
608 /* Enable automatic generation of flow control frames, period 0xffff. */
609 iowrite32(0x0030FFFF, ioaddr + FlowCtrl);
610
611 yp->tx_threshold = 32;
612 iowrite32(yp->tx_threshold, ioaddr + TxThreshold);
613
614 if (dev->if_port == 0)
615 dev->if_port = yp->default_port;
616
617 netif_start_queue(dev);
618
619 /* Setting the Rx mode will start the Rx process. */
620 if (yp->drv_flags & IsGigabit) {
621 /* We are always in full-duplex mode with gigabit! */
622 yp->full_duplex = 1;
623 iowrite16(0x01CF, ioaddr + Cnfg);
624 } else {
625 iowrite16(0x0018, ioaddr + FrameGap0); /* 0060/4060 for non-MII 10baseT */
626 iowrite16(0x1018, ioaddr + FrameGap1);
627 iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg);
628 }
629 set_rx_mode(dev);
630
631 /* Enable interrupts by setting the interrupt mask. */
632 iowrite16(0x81ff, ioaddr + IntrEnb); /* See enum intr_status_bits */
633 iowrite16(0x0000, ioaddr + EventStatus); /* Clear non-interrupting events */
634 iowrite32(0x80008000, ioaddr + RxCtrl); /* Start Rx and Tx channels. */
635 iowrite32(0x80008000, ioaddr + TxCtrl);
636
637 if (yellowfin_debug > 2) {
638 printk(KERN_DEBUG "%s: Done yellowfin_open().\n",
639 dev->name);
640 }
641
642 /* Set the timer to check for link beat. */
643 init_timer(&yp->timer);
644 yp->timer.expires = jiffies + 3*HZ;
645 yp->timer.data = (unsigned long)dev;
646 yp->timer.function = &yellowfin_timer; /* timer handler */
647 add_timer(&yp->timer);
648
649 return 0;
650}
651
652static void yellowfin_timer(unsigned long data)
653{
654 struct net_device *dev = (struct net_device *)data;
655 struct yellowfin_private *yp = netdev_priv(dev);
656 void __iomem *ioaddr = yp->base;
657 int next_tick = 60*HZ;
658
659 if (yellowfin_debug > 3) {
660 printk(KERN_DEBUG "%s: Yellowfin timer tick, status %8.8x.\n",
661 dev->name, ioread16(ioaddr + IntrStatus));
662 }
663
664 if (yp->mii_cnt) {
665 int bmsr = mdio_read(ioaddr, yp->phys[0], MII_BMSR);
666 int lpa = mdio_read(ioaddr, yp->phys[0], MII_LPA);
667 int negotiated = lpa & yp->advertising;
668 if (yellowfin_debug > 1)
669 printk(KERN_DEBUG "%s: MII #%d status register is %4.4x, "
670 "link partner capability %4.4x.\n",
671 dev->name, yp->phys[0], bmsr, lpa);
672
673 yp->full_duplex = mii_duplex(yp->duplex_lock, negotiated);
6aa20a22 674
1da177e4
LT
675 iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg);
676
677 if (bmsr & BMSR_LSTATUS)
678 next_tick = 60*HZ;
679 else
680 next_tick = 3*HZ;
681 }
682
683 yp->timer.expires = jiffies + next_tick;
684 add_timer(&yp->timer);
685}
686
687static void yellowfin_tx_timeout(struct net_device *dev)
688{
689 struct yellowfin_private *yp = netdev_priv(dev);
690 void __iomem *ioaddr = yp->base;
691
692 printk(KERN_WARNING "%s: Yellowfin transmit timed out at %d/%d Tx "
693 "status %4.4x, Rx status %4.4x, resetting...\n",
694 dev->name, yp->cur_tx, yp->dirty_tx,
695 ioread32(ioaddr + TxStatus), ioread32(ioaddr + RxStatus));
696
697 /* Note: these should be KERN_DEBUG. */
698 if (yellowfin_debug) {
699 int i;
700 printk(KERN_WARNING " Rx ring %p: ", yp->rx_ring);
701 for (i = 0; i < RX_RING_SIZE; i++)
702 printk(" %8.8x", yp->rx_ring[i].result_status);
703 printk("\n"KERN_WARNING" Tx ring %p: ", yp->tx_ring);
704 for (i = 0; i < TX_RING_SIZE; i++)
705 printk(" %4.4x /%8.8x", yp->tx_status[i].tx_errs,
706 yp->tx_ring[i].result_status);
707 printk("\n");
708 }
709
710 /* If the hardware is found to hang regularly, we will update the code
711 to reinitialize the chip here. */
712 dev->if_port = 0;
713
714 /* Wake the potentially-idle transmit channel. */
715 iowrite32(0x10001000, yp->base + TxCtrl);
716 if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
717 netif_wake_queue (dev); /* Typical path */
718
719 dev->trans_start = jiffies;
09f75cd7 720 dev->stats.tx_errors++;
1da177e4
LT
721}
722
723/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
724static void yellowfin_init_ring(struct net_device *dev)
725{
726 struct yellowfin_private *yp = netdev_priv(dev);
727 int i;
728
729 yp->tx_full = 0;
730 yp->cur_rx = yp->cur_tx = 0;
731 yp->dirty_tx = 0;
732
733 yp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
734
735 for (i = 0; i < RX_RING_SIZE; i++) {
736 yp->rx_ring[i].dbdma_cmd =
737 cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz);
738 yp->rx_ring[i].branch_addr = cpu_to_le32(yp->rx_ring_dma +
739 ((i+1)%RX_RING_SIZE)*sizeof(struct yellowfin_desc));
740 }
741
742 for (i = 0; i < RX_RING_SIZE; i++) {
743 struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
744 yp->rx_skbuff[i] = skb;
745 if (skb == NULL)
746 break;
747 skb->dev = dev; /* Mark as being used by this device. */
748 skb_reserve(skb, 2); /* 16 byte align the IP header. */
749 yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
689be439 750 skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
1da177e4
LT
751 }
752 yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP);
753 yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
754
755#define NO_TXSTATS
756#ifdef NO_TXSTATS
757 /* In this mode the Tx ring needs only a single descriptor. */
758 for (i = 0; i < TX_RING_SIZE; i++) {
759 yp->tx_skbuff[i] = NULL;
760 yp->tx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP);
761 yp->tx_ring[i].branch_addr = cpu_to_le32(yp->tx_ring_dma +
762 ((i+1)%TX_RING_SIZE)*sizeof(struct yellowfin_desc));
763 }
764 /* Wrap ring */
765 yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS);
766#else
767{
768 int j;
769
770 /* Tx ring needs a pair of descriptors, the second for the status. */
771 for (i = 0; i < TX_RING_SIZE; i++) {
772 j = 2*i;
773 yp->tx_skbuff[i] = 0;
774 /* Branch on Tx error. */
775 yp->tx_ring[j].dbdma_cmd = cpu_to_le32(CMD_STOP);
776 yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma +
80950f8b 777 (j+1)*sizeof(struct yellowfin_desc));
1da177e4
LT
778 j++;
779 if (yp->flags & FullTxStatus) {
780 yp->tx_ring[j].dbdma_cmd =
781 cpu_to_le32(CMD_TXSTATUS | sizeof(*yp->tx_status));
782 yp->tx_ring[j].request_cnt = sizeof(*yp->tx_status);
783 yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma +
80950f8b 784 i*sizeof(struct tx_status_words));
1da177e4
LT
785 } else {
786 /* Symbios chips write only tx_errs word. */
787 yp->tx_ring[j].dbdma_cmd =
788 cpu_to_le32(CMD_TXSTATUS | INTR_ALWAYS | 2);
789 yp->tx_ring[j].request_cnt = 2;
790 /* Om pade ummmmm... */
791 yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma +
792 i*sizeof(struct tx_status_words) +
6aa20a22 793 &(yp->tx_status[0].tx_errs) -
1da177e4
LT
794 &(yp->tx_status[0]));
795 }
6aa20a22 796 yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma +
1da177e4
LT
797 ((j+1)%(2*TX_RING_SIZE))*sizeof(struct yellowfin_desc));
798 }
799 /* Wrap ring */
800 yp->tx_ring[++j].dbdma_cmd |= cpu_to_le32(BRANCH_ALWAYS | INTR_ALWAYS);
801}
802#endif
803 yp->tx_tail_desc = &yp->tx_status[0];
804 return;
805}
806
807static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev)
808{
809 struct yellowfin_private *yp = netdev_priv(dev);
810 unsigned entry;
811 int len = skb->len;
812
813 netif_stop_queue (dev);
814
815 /* Note: Ordering is important here, set the field with the
816 "ownership" bit last, and only then increment cur_tx. */
817
818 /* Calculate the next Tx descriptor entry. */
819 entry = yp->cur_tx % TX_RING_SIZE;
820
821 if (gx_fix) { /* Note: only works for paddable protocols e.g. IP. */
822 int cacheline_end = ((unsigned long)skb->data + skb->len) % 32;
823 /* Fix GX chipset errata. */
824 if (cacheline_end > 24 || cacheline_end == 0) {
825 len = skb->len + 32 - cacheline_end + 1;
5b057c6b
HX
826 if (skb_padto(skb, len)) {
827 yp->tx_skbuff[entry] = NULL;
828 netif_wake_queue(dev);
829 return 0;
830 }
1da177e4
LT
831 }
832 }
833 yp->tx_skbuff[entry] = skb;
834
835#ifdef NO_TXSTATS
6aa20a22 836 yp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
1da177e4
LT
837 skb->data, len, PCI_DMA_TODEVICE));
838 yp->tx_ring[entry].result_status = 0;
839 if (entry >= TX_RING_SIZE-1) {
840 /* New stop command. */
841 yp->tx_ring[0].dbdma_cmd = cpu_to_le32(CMD_STOP);
842 yp->tx_ring[TX_RING_SIZE-1].dbdma_cmd =
843 cpu_to_le32(CMD_TX_PKT|BRANCH_ALWAYS | len);
844 } else {
845 yp->tx_ring[entry+1].dbdma_cmd = cpu_to_le32(CMD_STOP);
846 yp->tx_ring[entry].dbdma_cmd =
847 cpu_to_le32(CMD_TX_PKT | BRANCH_IFTRUE | len);
848 }
849 yp->cur_tx++;
850#else
851 yp->tx_ring[entry<<1].request_cnt = len;
6aa20a22 852 yp->tx_ring[entry<<1].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
1da177e4 853 skb->data, len, PCI_DMA_TODEVICE));
6aa20a22 854 /* The input_last (status-write) command is constant, but we must
1da177e4
LT
855 rewrite the subsequent 'stop' command. */
856
857 yp->cur_tx++;
858 {
859 unsigned next_entry = yp->cur_tx % TX_RING_SIZE;
860 yp->tx_ring[next_entry<<1].dbdma_cmd = cpu_to_le32(CMD_STOP);
861 }
862 /* Final step -- overwrite the old 'stop' command. */
863
864 yp->tx_ring[entry<<1].dbdma_cmd =
865 cpu_to_le32( ((entry % 6) == 0 ? CMD_TX_PKT|INTR_ALWAYS|BRANCH_IFTRUE :
866 CMD_TX_PKT | BRANCH_IFTRUE) | len);
867#endif
868
869 /* Non-x86 Todo: explicitly flush cache lines here. */
870
871 /* Wake the potentially-idle transmit channel. */
872 iowrite32(0x10001000, yp->base + TxCtrl);
873
874 if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
875 netif_start_queue (dev); /* Typical path */
876 else
877 yp->tx_full = 1;
878 dev->trans_start = jiffies;
879
880 if (yellowfin_debug > 4) {
881 printk(KERN_DEBUG "%s: Yellowfin transmit frame #%d queued in slot %d.\n",
882 dev->name, yp->cur_tx, entry);
883 }
884 return 0;
885}
886
887/* The interrupt handler does all of the Rx thread work and cleans up
888 after the Tx thread. */
7d12e780 889static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
1da177e4
LT
890{
891 struct net_device *dev = dev_instance;
892 struct yellowfin_private *yp;
893 void __iomem *ioaddr;
894 int boguscnt = max_interrupt_work;
895 unsigned int handled = 0;
896
1da177e4
LT
897 yp = netdev_priv(dev);
898 ioaddr = yp->base;
6aa20a22 899
1da177e4
LT
900 spin_lock (&yp->lock);
901
902 do {
903 u16 intr_status = ioread16(ioaddr + IntrClear);
904
905 if (yellowfin_debug > 4)
906 printk(KERN_DEBUG "%s: Yellowfin interrupt, status %4.4x.\n",
907 dev->name, intr_status);
908
909 if (intr_status == 0)
910 break;
911 handled = 1;
912
913 if (intr_status & (IntrRxDone | IntrEarlyRx)) {
914 yellowfin_rx(dev);
915 iowrite32(0x10001000, ioaddr + RxCtrl); /* Wake Rx engine. */
916 }
917
918#ifdef NO_TXSTATS
919 for (; yp->cur_tx - yp->dirty_tx > 0; yp->dirty_tx++) {
920 int entry = yp->dirty_tx % TX_RING_SIZE;
921 struct sk_buff *skb;
922
923 if (yp->tx_ring[entry].result_status == 0)
924 break;
925 skb = yp->tx_skbuff[entry];
09f75cd7
JG
926 dev->stats.tx_packets++;
927 dev->stats.tx_bytes += skb->len;
1da177e4 928 /* Free the original skb. */
e5a31421 929 pci_unmap_single(yp->pci_dev, le32_to_cpu(yp->tx_ring[entry].addr),
1da177e4
LT
930 skb->len, PCI_DMA_TODEVICE);
931 dev_kfree_skb_irq(skb);
932 yp->tx_skbuff[entry] = NULL;
933 }
934 if (yp->tx_full
935 && yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE - 4) {
936 /* The ring is no longer full, clear tbusy. */
937 yp->tx_full = 0;
938 netif_wake_queue(dev);
939 }
940#else
941 if ((intr_status & IntrTxDone) || (yp->tx_tail_desc->tx_errs)) {
942 unsigned dirty_tx = yp->dirty_tx;
943
944 for (dirty_tx = yp->dirty_tx; yp->cur_tx - dirty_tx > 0;
945 dirty_tx++) {
946 /* Todo: optimize this. */
947 int entry = dirty_tx % TX_RING_SIZE;
948 u16 tx_errs = yp->tx_status[entry].tx_errs;
949 struct sk_buff *skb;
950
951#ifndef final_version
952 if (yellowfin_debug > 5)
953 printk(KERN_DEBUG "%s: Tx queue %d check, Tx status "
954 "%4.4x %4.4x %4.4x %4.4x.\n",
955 dev->name, entry,
956 yp->tx_status[entry].tx_cnt,
957 yp->tx_status[entry].tx_errs,
958 yp->tx_status[entry].total_tx_cnt,
959 yp->tx_status[entry].paused);
960#endif
961 if (tx_errs == 0)
962 break; /* It still hasn't been Txed */
963 skb = yp->tx_skbuff[entry];
964 if (tx_errs & 0xF810) {
965 /* There was an major error, log it. */
966#ifndef final_version
967 if (yellowfin_debug > 1)
968 printk(KERN_DEBUG "%s: Transmit error, Tx status %4.4x.\n",
969 dev->name, tx_errs);
970#endif
09f75cd7
JG
971 dev->stats.tx_errors++;
972 if (tx_errs & 0xF800) dev->stats.tx_aborted_errors++;
973 if (tx_errs & 0x0800) dev->stats.tx_carrier_errors++;
974 if (tx_errs & 0x2000) dev->stats.tx_window_errors++;
975 if (tx_errs & 0x8000) dev->stats.tx_fifo_errors++;
1da177e4
LT
976 } else {
977#ifndef final_version
978 if (yellowfin_debug > 4)
979 printk(KERN_DEBUG "%s: Normal transmit, Tx status %4.4x.\n",
980 dev->name, tx_errs);
981#endif
09f75cd7
JG
982 dev->stats.tx_bytes += skb->len;
983 dev->stats.collisions += tx_errs & 15;
984 dev->stats.tx_packets++;
1da177e4
LT
985 }
986 /* Free the original skb. */
6aa20a22
JG
987 pci_unmap_single(yp->pci_dev,
988 yp->tx_ring[entry<<1].addr, skb->len,
1da177e4
LT
989 PCI_DMA_TODEVICE);
990 dev_kfree_skb_irq(skb);
991 yp->tx_skbuff[entry] = 0;
992 /* Mark status as empty. */
993 yp->tx_status[entry].tx_errs = 0;
994 }
995
996#ifndef final_version
997 if (yp->cur_tx - dirty_tx > TX_RING_SIZE) {
998 printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
999 dev->name, dirty_tx, yp->cur_tx, yp->tx_full);
1000 dirty_tx += TX_RING_SIZE;
1001 }
1002#endif
1003
1004 if (yp->tx_full
1005 && yp->cur_tx - dirty_tx < TX_QUEUE_SIZE - 2) {
1006 /* The ring is no longer full, clear tbusy. */
1007 yp->tx_full = 0;
1008 netif_wake_queue(dev);
1009 }
1010
1011 yp->dirty_tx = dirty_tx;
1012 yp->tx_tail_desc = &yp->tx_status[dirty_tx % TX_RING_SIZE];
1013 }
1014#endif
1015
1016 /* Log errors and other uncommon events. */
1017 if (intr_status & 0x2ee) /* Abnormal error summary. */
1018 yellowfin_error(dev, intr_status);
1019
1020 if (--boguscnt < 0) {
1021 printk(KERN_WARNING "%s: Too much work at interrupt, "
1022 "status=0x%4.4x.\n",
1023 dev->name, intr_status);
1024 break;
1025 }
1026 } while (1);
1027
1028 if (yellowfin_debug > 3)
1029 printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
1030 dev->name, ioread16(ioaddr + IntrStatus));
1031
1032 spin_unlock (&yp->lock);
1033 return IRQ_RETVAL(handled);
1034}
1035
1036/* This routine is logically part of the interrupt handler, but separated
1037 for clarity and better register allocation. */
1038static int yellowfin_rx(struct net_device *dev)
1039{
1040 struct yellowfin_private *yp = netdev_priv(dev);
1041 int entry = yp->cur_rx % RX_RING_SIZE;
1042 int boguscnt = yp->dirty_rx + RX_RING_SIZE - yp->cur_rx;
1043
1044 if (yellowfin_debug > 4) {
1045 printk(KERN_DEBUG " In yellowfin_rx(), entry %d status %8.8x.\n",
1046 entry, yp->rx_ring[entry].result_status);
1047 printk(KERN_DEBUG " #%d desc. %8.8x %8.8x %8.8x.\n",
1048 entry, yp->rx_ring[entry].dbdma_cmd, yp->rx_ring[entry].addr,
1049 yp->rx_ring[entry].result_status);
1050 }
1051
1052 /* If EOP is set on the next entry, it's a new packet. Send it up. */
1053 while (1) {
1054 struct yellowfin_desc *desc = &yp->rx_ring[entry];
1055 struct sk_buff *rx_skb = yp->rx_skbuff[entry];
1056 s16 frame_status;
1057 u16 desc_status;
1058 int data_size;
1059 u8 *buf_addr;
1060
1061 if(!desc->result_status)
1062 break;
e5a31421 1063 pci_dma_sync_single_for_cpu(yp->pci_dev, le32_to_cpu(desc->addr),
1da177e4
LT
1064 yp->rx_buf_sz, PCI_DMA_FROMDEVICE);
1065 desc_status = le32_to_cpu(desc->result_status) >> 16;
689be439 1066 buf_addr = rx_skb->data;
6aa20a22 1067 data_size = (le32_to_cpu(desc->dbdma_cmd) -
1da177e4 1068 le32_to_cpu(desc->result_status)) & 0xffff;
6caf52a4 1069 frame_status = get_unaligned_le16(&(buf_addr[data_size - 2]));
1da177e4
LT
1070 if (yellowfin_debug > 4)
1071 printk(KERN_DEBUG " yellowfin_rx() status was %4.4x.\n",
1072 frame_status);
1073 if (--boguscnt < 0)
1074 break;
1075 if ( ! (desc_status & RX_EOP)) {
1076 if (data_size != 0)
1077 printk(KERN_WARNING "%s: Oversized Ethernet frame spanned multiple buffers,"
1078 " status %4.4x, data_size %d!\n", dev->name, desc_status, data_size);
09f75cd7 1079 dev->stats.rx_length_errors++;
1da177e4
LT
1080 } else if ((yp->drv_flags & IsGigabit) && (frame_status & 0x0038)) {
1081 /* There was a error. */
1082 if (yellowfin_debug > 3)
1083 printk(KERN_DEBUG " yellowfin_rx() Rx error was %4.4x.\n",
1084 frame_status);
09f75cd7
JG
1085 dev->stats.rx_errors++;
1086 if (frame_status & 0x0060) dev->stats.rx_length_errors++;
1087 if (frame_status & 0x0008) dev->stats.rx_frame_errors++;
1088 if (frame_status & 0x0010) dev->stats.rx_crc_errors++;
1089 if (frame_status < 0) dev->stats.rx_dropped++;
1da177e4
LT
1090 } else if ( !(yp->drv_flags & IsGigabit) &&
1091 ((buf_addr[data_size-1] & 0x85) || buf_addr[data_size-2] & 0xC0)) {
1092 u8 status1 = buf_addr[data_size-2];
1093 u8 status2 = buf_addr[data_size-1];
09f75cd7
JG
1094 dev->stats.rx_errors++;
1095 if (status1 & 0xC0) dev->stats.rx_length_errors++;
1096 if (status2 & 0x03) dev->stats.rx_frame_errors++;
1097 if (status2 & 0x04) dev->stats.rx_crc_errors++;
1098 if (status2 & 0x80) dev->stats.rx_dropped++;
1da177e4
LT
1099#ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */
1100 } else if ((yp->flags & HasMACAddrBug) &&
1101 memcmp(le32_to_cpu(yp->rx_ring_dma +
1102 entry*sizeof(struct yellowfin_desc)),
6aa20a22 1103 dev->dev_addr, 6) != 0 &&
1da177e4
LT
1104 memcmp(le32_to_cpu(yp->rx_ring_dma +
1105 entry*sizeof(struct yellowfin_desc)),
1106 "\377\377\377\377\377\377", 6) != 0) {
e174961c
JB
1107 if (bogus_rx++ == 0)
1108 printk(KERN_WARNING "%s: Bad frame to %pM\n",
1109 dev->name, buf_addr);
1da177e4
LT
1110#endif
1111 } else {
1112 struct sk_buff *skb;
1113 int pkt_len = data_size -
1114 (yp->chip_id ? 7 : 8 + buf_addr[data_size - 8]);
1115 /* To verify: Yellowfin Length should omit the CRC! */
1116
1117#ifndef final_version
1118 if (yellowfin_debug > 4)
1119 printk(KERN_DEBUG " yellowfin_rx() normal Rx pkt length %d"
1120 " of %d, bogus_cnt %d.\n",
1121 pkt_len, data_size, boguscnt);
1122#endif
1123 /* Check if the packet is long enough to just pass up the skbuff
1124 without copying to a properly sized skbuff. */
1125 if (pkt_len > rx_copybreak) {
1126 skb_put(skb = rx_skb, pkt_len);
6aa20a22 1127 pci_unmap_single(yp->pci_dev,
e5a31421 1128 le32_to_cpu(yp->rx_ring[entry].addr),
6aa20a22 1129 yp->rx_buf_sz,
1da177e4
LT
1130 PCI_DMA_FROMDEVICE);
1131 yp->rx_skbuff[entry] = NULL;
1132 } else {
1133 skb = dev_alloc_skb(pkt_len + 2);
1134 if (skb == NULL)
1135 break;
1da177e4 1136 skb_reserve(skb, 2); /* 16 byte align the IP header */
8c7b7faa 1137 skb_copy_to_linear_data(skb, rx_skb->data, pkt_len);
1da177e4 1138 skb_put(skb, pkt_len);
e5a31421
AV
1139 pci_dma_sync_single_for_device(yp->pci_dev,
1140 le32_to_cpu(desc->addr),
1141 yp->rx_buf_sz,
1142 PCI_DMA_FROMDEVICE);
1da177e4
LT
1143 }
1144 skb->protocol = eth_type_trans(skb, dev);
1145 netif_rx(skb);
09f75cd7
JG
1146 dev->stats.rx_packets++;
1147 dev->stats.rx_bytes += pkt_len;
1da177e4
LT
1148 }
1149 entry = (++yp->cur_rx) % RX_RING_SIZE;
1150 }
1151
1152 /* Refill the Rx ring buffers. */
1153 for (; yp->cur_rx - yp->dirty_rx > 0; yp->dirty_rx++) {
1154 entry = yp->dirty_rx % RX_RING_SIZE;
1155 if (yp->rx_skbuff[entry] == NULL) {
1156 struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
1157 if (skb == NULL)
1158 break; /* Better luck next round. */
1159 yp->rx_skbuff[entry] = skb;
1160 skb->dev = dev; /* Mark as being used by this device. */
1161 skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
1162 yp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
689be439 1163 skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
1da177e4
LT
1164 }
1165 yp->rx_ring[entry].dbdma_cmd = cpu_to_le32(CMD_STOP);
1166 yp->rx_ring[entry].result_status = 0; /* Clear complete bit. */
1167 if (entry != 0)
1168 yp->rx_ring[entry - 1].dbdma_cmd =
1169 cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz);
1170 else
1171 yp->rx_ring[RX_RING_SIZE - 1].dbdma_cmd =
1172 cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | BRANCH_ALWAYS
1173 | yp->rx_buf_sz);
1174 }
1175
1176 return 0;
1177}
1178
1179static void yellowfin_error(struct net_device *dev, int intr_status)
1180{
1da177e4
LT
1181 printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n",
1182 dev->name, intr_status);
1183 /* Hmmmmm, it's not clear what to do here. */
1184 if (intr_status & (IntrTxPCIErr | IntrTxPCIFault))
09f75cd7 1185 dev->stats.tx_errors++;
1da177e4 1186 if (intr_status & (IntrRxPCIErr | IntrRxPCIFault))
09f75cd7 1187 dev->stats.rx_errors++;
1da177e4
LT
1188}
1189
1190static int yellowfin_close(struct net_device *dev)
1191{
1192 struct yellowfin_private *yp = netdev_priv(dev);
1193 void __iomem *ioaddr = yp->base;
1194 int i;
1195
1196 netif_stop_queue (dev);
1197
1198 if (yellowfin_debug > 1) {
1199 printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %4.4x "
1200 "Rx %4.4x Int %2.2x.\n",
1201 dev->name, ioread16(ioaddr + TxStatus),
1202 ioread16(ioaddr + RxStatus),
1203 ioread16(ioaddr + IntrStatus));
1204 printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n",
1205 dev->name, yp->cur_tx, yp->dirty_tx, yp->cur_rx, yp->dirty_rx);
1206 }
1207
1208 /* Disable interrupts by clearing the interrupt mask. */
1209 iowrite16(0x0000, ioaddr + IntrEnb);
1210
1211 /* Stop the chip's Tx and Rx processes. */
1212 iowrite32(0x80000000, ioaddr + RxCtrl);
1213 iowrite32(0x80000000, ioaddr + TxCtrl);
1214
1215 del_timer(&yp->timer);
1216
1217#if defined(__i386__)
1218 if (yellowfin_debug > 2) {
1219 printk("\n"KERN_DEBUG" Tx ring at %8.8llx:\n",
1220 (unsigned long long)yp->tx_ring_dma);
1221 for (i = 0; i < TX_RING_SIZE*2; i++)
1222 printk(" %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
1223 ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ',
1224 i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr,
1225 yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status);
1226 printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status);
1227 for (i = 0; i < TX_RING_SIZE; i++)
1228 printk(" #%d status %4.4x %4.4x %4.4x %4.4x.\n",
1229 i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs,
1230 yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused);
1231
1232 printk("\n"KERN_DEBUG " Rx ring %8.8llx:\n",
1233 (unsigned long long)yp->rx_ring_dma);
1234 for (i = 0; i < RX_RING_SIZE; i++) {
1235 printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n",
1236 ioread32(ioaddr + RxPtr) == (long)&yp->rx_ring[i] ? '>' : ' ',
1237 i, yp->rx_ring[i].dbdma_cmd, yp->rx_ring[i].addr,
1238 yp->rx_ring[i].result_status);
1239 if (yellowfin_debug > 6) {
1240 if (get_unaligned((u8*)yp->rx_ring[i].addr) != 0x69) {
1241 int j;
1242 for (j = 0; j < 0x50; j++)
1243 printk(" %4.4x",
1244 get_unaligned(((u16*)yp->rx_ring[i].addr) + j));
1245 printk("\n");
1246 }
1247 }
1248 }
1249 }
1250#endif /* __i386__ debugging only */
1251
1252 free_irq(dev->irq, dev);
1253
1254 /* Free all the skbuffs in the Rx queue. */
1255 for (i = 0; i < RX_RING_SIZE; i++) {
1256 yp->rx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP);
e5a31421 1257 yp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
1da177e4
LT
1258 if (yp->rx_skbuff[i]) {
1259 dev_kfree_skb(yp->rx_skbuff[i]);
1260 }
1261 yp->rx_skbuff[i] = NULL;
1262 }
1263 for (i = 0; i < TX_RING_SIZE; i++) {
1264 if (yp->tx_skbuff[i])
1265 dev_kfree_skb(yp->tx_skbuff[i]);
1266 yp->tx_skbuff[i] = NULL;
1267 }
1268
1269#ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */
1270 if (yellowfin_debug > 0) {
1271 printk(KERN_DEBUG "%s: Received %d frames that we should not have.\n",
1272 dev->name, bogus_rx);
1273 }
1274#endif
1275
1276 return 0;
1277}
1278
1da177e4
LT
1279/* Set or clear the multicast filter for this adaptor. */
1280
1281static void set_rx_mode(struct net_device *dev)
1282{
1283 struct yellowfin_private *yp = netdev_priv(dev);
1284 void __iomem *ioaddr = yp->base;
1285 u16 cfg_value = ioread16(ioaddr + Cnfg);
1286
1287 /* Stop the Rx process to change any value. */
1288 iowrite16(cfg_value & ~0x1000, ioaddr + Cnfg);
1289 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
1da177e4
LT
1290 iowrite16(0x000F, ioaddr + AddrMode);
1291 } else if ((dev->mc_count > 64) || (dev->flags & IFF_ALLMULTI)) {
1292 /* Too many to filter well, or accept all multicasts. */
1293 iowrite16(0x000B, ioaddr + AddrMode);
1294 } else if (dev->mc_count > 0) { /* Must use the multicast hash table. */
1295 struct dev_mc_list *mclist;
1296 u16 hash_table[4];
1297 int i;
1298 memset(hash_table, 0, sizeof(hash_table));
1299 for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
1300 i++, mclist = mclist->next) {
1301 unsigned int bit;
1302
1303 /* Due to a bug in the early chip versions, multiple filter
1304 slots must be set for each address. */
1305 if (yp->drv_flags & HasMulticastBug) {
1306 bit = (ether_crc_le(3, mclist->dmi_addr) >> 3) & 0x3f;
1307 hash_table[bit >> 4] |= (1 << bit);
1308 bit = (ether_crc_le(4, mclist->dmi_addr) >> 3) & 0x3f;
1309 hash_table[bit >> 4] |= (1 << bit);
1310 bit = (ether_crc_le(5, mclist->dmi_addr) >> 3) & 0x3f;
1311 hash_table[bit >> 4] |= (1 << bit);
1312 }
1313 bit = (ether_crc_le(6, mclist->dmi_addr) >> 3) & 0x3f;
1314 hash_table[bit >> 4] |= (1 << bit);
1315 }
1316 /* Copy the hash table to the chip. */
1317 for (i = 0; i < 4; i++)
1318 iowrite16(hash_table[i], ioaddr + HashTbl + i*2);
1319 iowrite16(0x0003, ioaddr + AddrMode);
1320 } else { /* Normal, unicast/broadcast-only mode. */
1321 iowrite16(0x0001, ioaddr + AddrMode);
1322 }
1323 /* Restart the Rx process. */
1324 iowrite16(cfg_value | 0x1000, ioaddr + Cnfg);
1325}
1326
1327static void yellowfin_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1328{
1329 struct yellowfin_private *np = netdev_priv(dev);
1330 strcpy(info->driver, DRV_NAME);
1331 strcpy(info->version, DRV_VERSION);
1332 strcpy(info->bus_info, pci_name(np->pci_dev));
1333}
1334
7282d491 1335static const struct ethtool_ops ethtool_ops = {
1da177e4
LT
1336 .get_drvinfo = yellowfin_get_drvinfo
1337};
1338
1339static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1340{
1341 struct yellowfin_private *np = netdev_priv(dev);
1342 void __iomem *ioaddr = np->base;
1343 struct mii_ioctl_data *data = if_mii(rq);
1344
1345 switch(cmd) {
1346 case SIOCGMIIPHY: /* Get address of MII PHY in use. */
1347 data->phy_id = np->phys[0] & 0x1f;
1348 /* Fall Through */
1349
1350 case SIOCGMIIREG: /* Read MII PHY register. */
1351 data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f);
1352 return 0;
1353
1354 case SIOCSMIIREG: /* Write MII PHY register. */
1355 if (!capable(CAP_NET_ADMIN))
1356 return -EPERM;
1357 if (data->phy_id == np->phys[0]) {
1358 u16 value = data->val_in;
1359 switch (data->reg_num) {
1360 case 0:
1361 /* Check for autonegotiation on or reset. */
1362 np->medialock = (value & 0x9000) ? 0 : 1;
1363 if (np->medialock)
1364 np->full_duplex = (value & 0x0100) ? 1 : 0;
1365 break;
1366 case 4: np->advertising = value; break;
1367 }
1368 /* Perhaps check_duplex(dev), depending on chip semantics. */
1369 }
1370 mdio_write(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
1371 return 0;
1372 default:
1373 return -EOPNOTSUPP;
1374 }
1375}
1376
1377
1378static void __devexit yellowfin_remove_one (struct pci_dev *pdev)
1379{
1380 struct net_device *dev = pci_get_drvdata(pdev);
1381 struct yellowfin_private *np;
1382
5d9428de 1383 BUG_ON(!dev);
1da177e4
LT
1384 np = netdev_priv(dev);
1385
6aa20a22 1386 pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status,
1da177e4
LT
1387 np->tx_status_dma);
1388 pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
1389 pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
1390 unregister_netdev (dev);
1391
1392 pci_iounmap(pdev, np->base);
1393
1394 pci_release_regions (pdev);
1395
1396 free_netdev (dev);
1397 pci_set_drvdata(pdev, NULL);
1398}
1399
1400
1401static struct pci_driver yellowfin_driver = {
1402 .name = DRV_NAME,
1403 .id_table = yellowfin_pci_tbl,
1404 .probe = yellowfin_init_one,
1405 .remove = __devexit_p(yellowfin_remove_one),
1406};
1407
1408
1409static int __init yellowfin_init (void)
1410{
1411/* when a module, this is printed whether or not devices are found in probe */
1412#ifdef MODULE
1413 printk(version);
1414#endif
29917620 1415 return pci_register_driver(&yellowfin_driver);
1da177e4
LT
1416}
1417
1418
1419static void __exit yellowfin_cleanup (void)
1420{
1421 pci_unregister_driver (&yellowfin_driver);
1422}
1423
1424
1425module_init(yellowfin_init);
1426module_exit(yellowfin_cleanup);
This page took 0.518687 seconds and 5 git commands to generate.