projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Merge tag 'stmp-dev' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
[deliverable/linux.git] / drivers / nfc / pn544_hci.c
CommitLineData
bbed0dee
EL		 1/*
2 * HCI based Driver for NXP PN544 NFC Chip
3 *
4 * Copyright (C) 2012 Intel Corporation. All rights reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the
17 * Free Software Foundation, Inc.,
18 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21#include <linux/crc-ccitt.h>
22#include <linux/module.h>
23#include <linux/delay.h>
24#include <linux/slab.h>
25#include <linux/miscdevice.h>
26#include <linux/interrupt.h>
27#include <linux/gpio.h>
28#include <linux/i2c.h>
29
30#include <linux/nfc.h>
31#include <net/nfc/hci.h>
32#include <net/nfc/shdlc.h>
33
34#include <linux/nfc/pn544.h>
35
36#define DRIVER_DESC "HCI NFC driver for PN544"
37
38#define PN544_HCI_DRIVER_NAME "pn544_hci"
39
40/* Timing restrictions (ms) */
41#define PN544_HCI_RESETVEN_TIME 30
42
43static struct i2c_device_id pn544_hci_id_table[] = {
44 {"pn544", 0},
45 {}
46};
47
48MODULE_DEVICE_TABLE(i2c, pn544_hci_id_table);
49
50#define HCI_MODE 0
51#define FW_MODE 1
52
53/* framing in HCI mode */
54#define PN544_HCI_LLC_LEN 1
55#define PN544_HCI_LLC_CRC 2
56#define PN544_HCI_LLC_LEN_CRC (PN544_HCI_LLC_LEN + PN544_HCI_LLC_CRC)
57#define PN544_HCI_LLC_MIN_SIZE (1 + PN544_HCI_LLC_LEN_CRC)
58#define PN544_HCI_LLC_MAX_PAYLOAD 29
59#define PN544_HCI_LLC_MAX_SIZE (PN544_HCI_LLC_LEN_CRC + 1 + \
60 PN544_HCI_LLC_MAX_PAYLOAD)
61
62enum pn544_state {
63 PN544_ST_COLD,
64 PN544_ST_FW_READY,
65 PN544_ST_READY,
66};
67
68#define FULL_VERSION_LEN 11
69
70/* Proprietary commands */
71#define PN544_WRITE 0x3f
72
73/* Proprietary gates, events, commands and registers */
74
75/* NFC_HCI_RF_READER_A_GATE additional registers and commands */
76#define PN544_RF_READER_A_AUTO_ACTIVATION 0x10
77#define PN544_RF_READER_A_CMD_CONTINUE_ACTIVATION 0x12
78#define PN544_MIFARE_CMD 0x21
79
80/* Commands that apply to all RF readers */
81#define PN544_RF_READER_CMD_PRESENCE_CHECK 0x30
82#define PN544_RF_READER_CMD_ACTIVATE_NEXT 0x32
83
84/* NFC_HCI_ID_MGMT_GATE additional registers */
85#define PN544_ID_MGMT_FULL_VERSION_SW 0x10
86
87#define PN544_RF_READER_ISO15693_GATE 0x12
88
89#define PN544_RF_READER_F_GATE 0x14
90#define PN544_FELICA_ID 0x04
91#define PN544_FELICA_RAW 0x20
92
93#define PN544_RF_READER_JEWEL_GATE 0x15
94#define PN544_JEWEL_RAW_CMD 0x23
95
96#define PN544_RF_READER_NFCIP1_INITIATOR_GATE 0x30
97#define PN544_RF_READER_NFCIP1_TARGET_GATE 0x31
98
99#define PN544_SYS_MGMT_GATE 0x90
100#define PN544_SYS_MGMT_INFO_NOTIFICATION 0x02
101
102#define PN544_POLLING_LOOP_MGMT_GATE 0x94
103#define PN544_PL_RDPHASES 0x06
104#define PN544_PL_EMULATION 0x07
105#define PN544_PL_NFCT_DEACTIVATED 0x09
106
107#define PN544_SWP_MGMT_GATE 0xA0
108
109#define PN544_NFC_WI_MGMT_GATE 0xA1
110
111static u8 pn544_custom_gates[] = {
112 PN544_SYS_MGMT_GATE,
113 PN544_SWP_MGMT_GATE,
114 PN544_POLLING_LOOP_MGMT_GATE,
115 PN544_NFC_WI_MGMT_GATE,
116 PN544_RF_READER_F_GATE,
117 PN544_RF_READER_JEWEL_GATE,
118 PN544_RF_READER_ISO15693_GATE,
119 PN544_RF_READER_NFCIP1_INITIATOR_GATE,
120 PN544_RF_READER_NFCIP1_TARGET_GATE
121};
122
123/* Largest headroom needed for outgoing custom commands */
124#define PN544_CMDS_HEADROOM 2
125
126struct pn544_hci_info {
127 struct i2c_client *i2c_dev;
128 struct nfc_shdlc *shdlc;
129
130 enum pn544_state state;
131
132 struct mutex info_lock;
133
134 unsigned int gpio_en;
135 unsigned int gpio_irq;
136 unsigned int gpio_fw;
137 unsigned int en_polarity;
138
139 int hard_fault; /*
140 * < 0 if hardware error occured (e.g. i2c err)
141 * and prevents normal operation.
142 */
143};
144
145static void pn544_hci_platform_init(struct pn544_hci_info *info)
146{
147 int polarity, retry, ret;
148 char rset_cmd[] = { 0x05, 0xF9, 0x04, 0x00, 0xC3, 0xE5 };
149 int count = sizeof(rset_cmd);
150
151 pr_info(DRIVER_DESC ": %s\n", __func__);
152 dev_info(&info->i2c_dev->dev, "Detecting nfc_en polarity\n");
153
154 /* Disable fw download */
155 gpio_set_value(info->gpio_fw, 0);
156
157 for (polarity = 0; polarity < 2; polarity++) {
158 info->en_polarity = polarity;
159 retry = 3;
160 while (retry--) {
161 /* power off */
162 gpio_set_value(info->gpio_en, !info->en_polarity);
163 usleep_range(10000, 15000);
164
165 /* power on */
166 gpio_set_value(info->gpio_en, info->en_polarity);
167 usleep_range(10000, 15000);
168
169 /* send reset */
170 dev_dbg(&info->i2c_dev->dev, "Sending reset cmd\n");
171 ret = i2c_master_send(info->i2c_dev, rset_cmd, count);
172 if (ret == count) {
173 dev_info(&info->i2c_dev->dev,
174 "nfc_en polarity : active %s\n",
175 (polarity == 0 ? "low" : "high"));
176 goto out;
177 }
178 }
179 }
180
181 dev_err(&info->i2c_dev->dev,
182 "Could not detect nfc_en polarity, fallback to active high\n");
183
184out:
185 gpio_set_value(info->gpio_en, !info->en_polarity);
186}
187
188static int pn544_hci_enable(struct pn544_hci_info *info, int mode)
189{
190 pr_info(DRIVER_DESC ": %s\n", __func__);
191
192 gpio_set_value(info->gpio_fw, 0);
193 gpio_set_value(info->gpio_en, info->en_polarity);
194 usleep_range(10000, 15000);
195
196 return 0;
197}
198
199static void pn544_hci_disable(struct pn544_hci_info *info)
200{
201 pr_info(DRIVER_DESC ": %s\n", __func__);
202
203 gpio_set_value(info->gpio_fw, 0);
204 gpio_set_value(info->gpio_en, !info->en_polarity);
205 usleep_range(10000, 15000);
206
207 gpio_set_value(info->gpio_en, info->en_polarity);
208 usleep_range(10000, 15000);
209
210 gpio_set_value(info->gpio_en, !info->en_polarity);
211 usleep_range(10000, 15000);
212}
213
214static int pn544_hci_i2c_write(struct i2c_client *client, u8 *buf, int len)
215{
216 int r;
217
218 usleep_range(3000, 6000);
219
220 r = i2c_master_send(client, buf, len);
221
222 if (r == -EREMOTEIO) { /* Retry, chip was in standby */
223 usleep_range(6000, 10000);
224 r = i2c_master_send(client, buf, len);
225 }
226
227 if (r >= 0 && r != len)
228 r = -EREMOTEIO;
229
230 return r;
231}
232
233static int check_crc(u8 *buf, int buflen)
234{
235 u8 len;
236 u16 crc;
237
238 len = buf[0] + 1;
239 crc = crc_ccitt(0xffff, buf, len - 2);
240 crc = ~crc;
241
242 if (buf[len - 2] != (crc & 0xff) || buf[len - 1] != (crc >> 8)) {
243 pr_err(PN544_HCI_DRIVER_NAME ": CRC error 0x%x != 0x%x 0x%x\n",
244 crc, buf[len - 1], buf[len - 2]);
245
246 pr_info(DRIVER_DESC ": %s : BAD CRC\n", __func__);
247 print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE,
248 16, 2, buf, buflen, false);
249 return -EPERM;
250 }
251 return 0;
252}
253
254/*
255 * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees
256 * that i2c bus will be flushed and that next read will start on a new frame.
257 * returned skb contains only LLC header and payload.
258 * returns:
259 * -EREMOTEIO : i2c read error (fatal)
260 * -EBADMSG : frame was incorrect and discarded
261 * -ENOMEM : cannot allocate skb, frame dropped
262 */
263static int pn544_hci_i2c_read(struct i2c_client *client, struct sk_buff **skb)
264{
265 int r;
266 u8 len;
267 u8 tmp[PN544_HCI_LLC_MAX_SIZE - 1];
268
269 r = i2c_master_recv(client, &len, 1);
270 if (r != 1) {
271 dev_err(&client->dev, "cannot read len byte\n");
272 return -EREMOTEIO;
273 }
274
275 if ((len < (PN544_HCI_LLC_MIN_SIZE - 1)) ||
276 (len > (PN544_HCI_LLC_MAX_SIZE - 1))) {
277 dev_err(&client->dev, "invalid len byte\n");
278 r = -EBADMSG;
279 goto flush;
280 }
281
282 *skb = alloc_skb(1 + len, GFP_KERNEL);
283 if (*skb == NULL) {
284 r = -ENOMEM;
285 goto flush;
286 }
287
288 *skb_put(*skb, 1) = len;
289
290 r = i2c_master_recv(client, skb_put(*skb, len), len);
291 if (r != len) {
292 kfree_skb(*skb);
293 return -EREMOTEIO;
294 }
295
296 r = check_crc((*skb)->data, (*skb)->len);
297 if (r != 0) {
298 kfree_skb(*skb);
299 r = -EBADMSG;
300 goto flush;
301 }
302
303 skb_pull(*skb, 1);
304 skb_trim(*skb, (*skb)->len - 2);
305
306 usleep_range(3000, 6000);
307
308 return 0;
309
310flush:
311 if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
312 r = -EREMOTEIO;
313
314 usleep_range(3000, 6000);
315
316 return r;
317}
318
319/*
320 * Reads an shdlc frame from the chip. This is not as straightforward as it
321 * seems. There are cases where we could loose the frame start synchronization.
322 * The frame format is len-data-crc, and corruption can occur anywhere while
323 * transiting on i2c bus, such that we could read an invalid len.
324 * In order to recover synchronization with the next frame, we must be sure
325 * to read the real amount of data without using the len byte. We do this by
326 * assuming the following:
327 * - the chip will always present only one single complete frame on the bus
328 * before triggering the interrupt
329 * - the chip will not present a new frame until we have completely read
330 * the previous one (or until we have handled the interrupt).
331 * The tricky case is when we read a corrupted len that is less than the real
332 * len. We must detect this here in order to determine that we need to flush
333 * the bus. This is the reason why we check the crc here.
334 */
335static irqreturn_t pn544_hci_irq_thread_fn(int irq, void *dev_id)
336{
337 struct pn544_hci_info *info = dev_id;
338 struct i2c_client *client = info->i2c_dev;
339 struct sk_buff *skb = NULL;
340 int r;
341
342 BUG_ON(!info);
343 BUG_ON(irq != info->i2c_dev->irq);
344
345 dev_dbg(&client->dev, "IRQ\n");
346
347 if (info->hard_fault != 0)
348 return IRQ_HANDLED;
349
350 r = pn544_hci_i2c_read(client, &skb);
351 if (r == -EREMOTEIO) {
352 info->hard_fault = r;
353
354 nfc_shdlc_recv_frame(info->shdlc, NULL);
355
356 return IRQ_HANDLED;
357 } else if ((r == -ENOMEM) || (r == -EBADMSG)) {
358 return IRQ_HANDLED;
359 }
360
361 nfc_shdlc_recv_frame(info->shdlc, skb);
362
363 return IRQ_HANDLED;
364}
365
366static int pn544_hci_open(struct nfc_shdlc *shdlc)
367{
368 struct pn544_hci_info *info = nfc_shdlc_get_clientdata(shdlc);
369 int r = 0;
370
371 mutex_lock(&info->info_lock);
372
373 if (info->state != PN544_ST_COLD) {
374 r = -EBUSY;
375 goto out;
376 }
377
378 r = pn544_hci_enable(info, HCI_MODE);
379
380out:
381 mutex_unlock(&info->info_lock);
382 return r;
383}
384
385static void pn544_hci_close(struct nfc_shdlc *shdlc)
386{
387 struct pn544_hci_info *info = nfc_shdlc_get_clientdata(shdlc);
388
389 mutex_lock(&info->info_lock);
390
391 if (info->state == PN544_ST_COLD)
392 goto out;
393
394 pn544_hci_disable(info);
395
396out:
397 mutex_unlock(&info->info_lock);
398}
399
400static int pn544_hci_ready(struct nfc_shdlc *shdlc)
401{
402 struct nfc_hci_dev *hdev = nfc_shdlc_get_hci_dev(shdlc);
403 struct sk_buff *skb;
404 static struct hw_config {
405 u8 adr[2];
406 u8 value;
407 } hw_config[] = {
408 {{0x9f, 0x9a}, 0x00},
409
410 {{0x98, 0x10}, 0xbc},
411
412 {{0x9e, 0x71}, 0x00},
413
414 {{0x98, 0x09}, 0x00},
415
416 {{0x9e, 0xb4}, 0x00},
417
418 {{0x9e, 0xd9}, 0xff},
419 {{0x9e, 0xda}, 0xff},
420 {{0x9e, 0xdb}, 0x23},
421 {{0x9e, 0xdc}, 0x21},
422 {{0x9e, 0xdd}, 0x22},
423 {{0x9e, 0xde}, 0x24},
424
425 {{0x9c, 0x01}, 0x08},
426
427 {{0x9e, 0xaa}, 0x01},
428
429 {{0x9b, 0xd1}, 0x0d},
430 {{0x9b, 0xd2}, 0x24},
431 {{0x9b, 0xd3}, 0x0a},
432 {{0x9b, 0xd4}, 0x22},
433 {{0x9b, 0xd5}, 0x08},
434 {{0x9b, 0xd6}, 0x1e},
435 {{0x9b, 0xdd}, 0x1c},
436
437 {{0x9b, 0x84}, 0x13},
438 {{0x99, 0x81}, 0x7f},
439 {{0x99, 0x31}, 0x70},
440
441 {{0x98, 0x00}, 0x3f},
442
443 {{0x9f, 0x09}, 0x00},
444
445 {{0x9f, 0x0a}, 0x05},
446
447 {{0x9e, 0xd1}, 0xa1},
448 {{0x99, 0x23}, 0x00},
449
450 {{0x9e, 0x74}, 0x80},
451
452 {{0x9f, 0x28}, 0x10},
453
454 {{0x9f, 0x35}, 0x14},
455
456 {{0x9f, 0x36}, 0x60},
457
458 {{0x9c, 0x31}, 0x00},
459
460 {{0x9c, 0x32}, 0xc8},
461
462 {{0x9c, 0x19}, 0x40},
463
464 {{0x9c, 0x1a}, 0x40},
465
466 {{0x9c, 0x0c}, 0x00},
467
468 {{0x9c, 0x0d}, 0x00},
469
470 {{0x9c, 0x12}, 0x00},
471
472 {{0x9c, 0x13}, 0x00},
473
474 {{0x98, 0xa2}, 0x0e},
475
476 {{0x98, 0x93}, 0x40},
477
478 {{0x98, 0x7d}, 0x02},
479 {{0x98, 0x7e}, 0x00},
480 {{0x9f, 0xc8}, 0x01},
481 };
482 struct hw_config *p = hw_config;
483 int count = ARRAY_SIZE(hw_config);
484 struct sk_buff *res_skb;
485 u8 param[4];
486 int r;
487
488 param[0] = 0;
489 while (count--) {
490 param[1] = p->adr[0];
491 param[2] = p->adr[1];
492 param[3] = p->value;
493
494 r = nfc_hci_send_cmd(hdev, PN544_SYS_MGMT_GATE, PN544_WRITE,
495 param, 4, &res_skb);
496 if (r < 0)
497 return r;
498
499 if (res_skb->len != 1) {
500 kfree_skb(res_skb);
501 return -EPROTO;
502 }
503
504 if (res_skb->data[0] != p->value) {
505 kfree_skb(res_skb);
506 return -EIO;
507 }
508
509 kfree_skb(res_skb);
510
511 p++;
512 }
513
514 param[0] = NFC_HCI_UICC_HOST_ID;
515 r = nfc_hci_set_param(hdev, NFC_HCI_ADMIN_GATE,
516 NFC_HCI_ADMIN_WHITELIST, param, 1);
517 if (r < 0)
518 return r;
519
520 param[0] = 0x3d;
521 r = nfc_hci_set_param(hdev, PN544_SYS_MGMT_GATE,
522 PN544_SYS_MGMT_INFO_NOTIFICATION, param, 1);
523 if (r < 0)
524 return r;
525
526 param[0] = 0x0;
527 r = nfc_hci_set_param(hdev, NFC_HCI_RF_READER_A_GATE,
528 PN544_RF_READER_A_AUTO_ACTIVATION, param, 1);
529 if (r < 0)
530 return r;
531
532 r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
533 NFC_HCI_EVT_END_OPERATION, NULL, 0);
534 if (r < 0)
535 return r;
536
537 param[0] = 0x1;
538 r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
539 PN544_PL_NFCT_DEACTIVATED, param, 1);
540 if (r < 0)
541 return r;
542
543 param[0] = 0x0;
544 r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
545 PN544_PL_RDPHASES, param, 1);
546 if (r < 0)
547 return r;
548
549 r = nfc_hci_get_param(hdev, NFC_HCI_ID_MGMT_GATE,
550 PN544_ID_MGMT_FULL_VERSION_SW, &skb);
551 if (r < 0)
552 return r;
553
554 if (skb->len != FULL_VERSION_LEN) {
555 kfree_skb(skb);
556 return -EINVAL;
557 }
558
559 print_hex_dump(KERN_DEBUG, "FULL VERSION SOFTWARE INFO: ",
560 DUMP_PREFIX_NONE, 16, 1,
561 skb->data, FULL_VERSION_LEN, false);
562
563 kfree_skb(skb);
564
565 return 0;
566}
567
568static int pn544_hci_xmit(struct nfc_shdlc *shdlc, struct sk_buff *skb)
569{
570 struct pn544_hci_info *info = nfc_shdlc_get_clientdata(shdlc);
571 struct i2c_client *client = info->i2c_dev;
572
573 if (info->hard_fault != 0)
574 return info->hard_fault;
575
576 return pn544_hci_i2c_write(client, skb->data, skb->len);
577}
578
579static int pn544_hci_start_poll(struct nfc_shdlc *shdlc, u32 protocols)
580{
581 struct nfc_hci_dev *hdev = nfc_shdlc_get_hci_dev(shdlc);
582 u8 phases = 0;
583 int r;
584 u8 duration[2];
585 u8 activated;
586
587 pr_info(DRIVER_DESC ": %s protocols = %d\n", __func__, protocols);
588
589 r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
590 NFC_HCI_EVT_END_OPERATION, NULL, 0);
591 if (r < 0)
592 return r;
593
594 duration[0] = 0x18;
595 duration[1] = 0x6a;
596 r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
597 PN544_PL_EMULATION, duration, 2);
598 if (r < 0)
599 return r;
600
601 activated = 0;
602 r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
603 PN544_PL_NFCT_DEACTIVATED, &activated, 1);
604 if (r < 0)
605 return r;
606
607 if (protocols & (NFC_PROTO_ISO14443_MASK | NFC_PROTO_MIFARE_MASK |
608 NFC_PROTO_JEWEL_MASK))
609 phases |= 1; /* Type A */
610 if (protocols & NFC_PROTO_FELICA_MASK) {
611 phases |= (1 << 2); /* Type F 212 */
612 phases |= (1 << 3); /* Type F 424 */
613 }
614
615 phases |= (1 << 5); /* NFC active */
616
617 r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
618 PN544_PL_RDPHASES, &phases, 1);
619 if (r < 0)
620 return r;
621
622 r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
623 NFC_HCI_EVT_READER_REQUESTED, NULL, 0);
624 if (r < 0)
625 nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
626 NFC_HCI_EVT_END_OPERATION, NULL, 0);
627
628 return r;
629}
630
631static int pn544_hci_target_from_gate(struct nfc_shdlc *shdlc, u8 gate,
632 struct nfc_target *target)
633{
634 switch (gate) {
635 case PN544_RF_READER_F_GATE:
636 target->supported_protocols = NFC_PROTO_FELICA_MASK;
637 break;
638 case PN544_RF_READER_JEWEL_GATE:
639 target->supported_protocols = NFC_PROTO_JEWEL_MASK;
640 target->sens_res = 0x0c00;
641 break;
642 default:
643 return -EPROTO;
644 }
645
646 return 0;
647}
648
649static int pn544_hci_complete_target_discovered(struct nfc_shdlc *shdlc,
650 u8 gate,
651 struct nfc_target *target)
652{
653 struct nfc_hci_dev *hdev = nfc_shdlc_get_hci_dev(shdlc);
654 struct sk_buff *uid_skb;
655 int r = 0;
656
657 if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) {
658 if (target->nfcid1_len != 4 && target->nfcid1_len != 7 &&
659 target->nfcid1_len != 10)
660 return -EPROTO;
661
662 r = nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
663 PN544_RF_READER_CMD_ACTIVATE_NEXT,
664 target->nfcid1, target->nfcid1_len, NULL);
665 } else if (target->supported_protocols & NFC_PROTO_FELICA_MASK) {
666 r = nfc_hci_get_param(hdev, PN544_RF_READER_F_GATE,
667 PN544_FELICA_ID, &uid_skb);
668 if (r < 0)
669 return r;
670
671 if (uid_skb->len != 8) {
672 kfree_skb(uid_skb);
673 return -EPROTO;
674 }
675
676 r = nfc_hci_send_cmd(hdev, PN544_RF_READER_F_GATE,
677 PN544_RF_READER_CMD_ACTIVATE_NEXT,
678 uid_skb->data, uid_skb->len, NULL);
679 kfree_skb(uid_skb);
680 } else if (target->supported_protocols & NFC_PROTO_ISO14443_MASK) {
681 /*
682 * TODO: maybe other ISO 14443 require some kind of continue
683 * activation, but for now we've seen only this one below.
684 */
685 if (target->sens_res == 0x4403) /* Type 4 Mifare DESFire */
686 r = nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
687 PN544_RF_READER_A_CMD_CONTINUE_ACTIVATION,
688 NULL, 0, NULL);
689 }
690
691 return r;
692}
693
694#define MIFARE_CMD_AUTH_KEY_A 0x60
695#define MIFARE_CMD_AUTH_KEY_B 0x61
696#define MIFARE_CMD_HEADER 2
697#define MIFARE_UID_LEN 4
698#define MIFARE_KEY_LEN 6
699#define MIFARE_CMD_LEN 12
700/*
701 * Returns:
702 * <= 0: driver handled the data exchange
703 * 1: driver doesn't especially handle, please do standard processing
704 */
705static int pn544_hci_data_exchange(struct nfc_shdlc *shdlc,
706 struct nfc_target *target,
707 struct sk_buff *skb,
708 struct sk_buff **res_skb)
709{
710 struct nfc_hci_dev *hdev = nfc_shdlc_get_hci_dev(shdlc);
711 int r;
712
713 pr_info(DRIVER_DESC ": %s for gate=%d\n", __func__,
714 target->hci_reader_gate);
715
716 switch (target->hci_reader_gate) {
717 case NFC_HCI_RF_READER_A_GATE:
718 if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) {
719 /*
720 * It seems that pn544 is inverting key and UID for
721 * MIFARE authentication commands.
722 */
723 if (skb->len == MIFARE_CMD_LEN &&
724 (skb->data[0] == MIFARE_CMD_AUTH_KEY_A ||
725 skb->data[0] == MIFARE_CMD_AUTH_KEY_B)) {
726 u8 uid[MIFARE_UID_LEN];
727 u8 *data = skb->data + MIFARE_CMD_HEADER;
728
729 memcpy(uid, data + MIFARE_KEY_LEN,
730 MIFARE_UID_LEN);
731 memmove(data + MIFARE_UID_LEN, data,
732 MIFARE_KEY_LEN);
733 memcpy(data, uid, MIFARE_UID_LEN);
734 }
735
736 return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
737 PN544_MIFARE_CMD,
738 skb->data, skb->len, res_skb);
739 } else
740 return 1;
741 case PN544_RF_READER_F_GATE:
742 *skb_push(skb, 1) = 0;
743 *skb_push(skb, 1) = 0;
744
745 r = nfc_hci_send_cmd(hdev, target->hci_reader_gate,
746 PN544_FELICA_RAW,
747 skb->data, skb->len, res_skb);
748 if (r == 0)
749 skb_pull(*res_skb, 1);
750 return r;
751 case PN544_RF_READER_JEWEL_GATE:
752 return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
753 PN544_JEWEL_RAW_CMD,
754 skb->data, skb->len, res_skb);
755 default:
756 return 1;
757 }
758}
759
760static int pn544_hci_check_presence(struct nfc_shdlc *shdlc,
761 struct nfc_target *target)
762{
763 struct nfc_hci_dev *hdev = nfc_shdlc_get_hci_dev(shdlc);
764
765 return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
766 PN544_RF_READER_CMD_PRESENCE_CHECK,
767 NULL, 0, NULL);
768}
769
770static struct nfc_shdlc_ops pn544_shdlc_ops = {
771 .open = pn544_hci_open,
772 .close = pn544_hci_close,
773 .hci_ready = pn544_hci_ready,
774 .xmit = pn544_hci_xmit,
775 .start_poll = pn544_hci_start_poll,
776 .target_from_gate = pn544_hci_target_from_gate,
777 .complete_target_discovered = pn544_hci_complete_target_discovered,
778 .data_exchange = pn544_hci_data_exchange,
779 .check_presence = pn544_hci_check_presence,
780};
781
782static int __devinit pn544_hci_probe(struct i2c_client *client,
783 const struct i2c_device_id *id)
784{
785 struct pn544_hci_info *info;
786 struct pn544_nfc_platform_data *pdata;
787 int r = 0;
788 u32 protocols;
789 struct nfc_hci_init_data init_data;
790
791 dev_dbg(&client->dev, "%s\n", __func__);
792 dev_dbg(&client->dev, "IRQ: %d\n", client->irq);
793
794 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
795 dev_err(&client->dev, "Need I2C_FUNC_I2C\n");
796 return -ENODEV;
797 }
798
799 info = kzalloc(sizeof(struct pn544_hci_info), GFP_KERNEL);
800 if (!info) {
801 dev_err(&client->dev,
802 "Cannot allocate memory for pn544_hci_info.\n");
803 r = -ENOMEM;
804 goto err_info_alloc;
805 }
806
807 info->i2c_dev = client;
808 info->state = PN544_ST_COLD;
809 mutex_init(&info->info_lock);
810 i2c_set_clientdata(client, info);
811
812 pdata = client->dev.platform_data;
813 if (pdata == NULL) {
814 dev_err(&client->dev, "No platform data\n");
815 r = -EINVAL;
816 goto err_pdata;
817 }
818
819 if (pdata->request_resources == NULL) {
820 dev_err(&client->dev, "request_resources() missing\n");
821 r = -EINVAL;
822 goto err_pdata;
823 }
824
825 r = pdata->request_resources(client);
826 if (r) {
827 dev_err(&client->dev, "Cannot get platform resources\n");
828 goto err_pdata;
829 }
830
831 info->gpio_en = pdata->get_gpio(NFC_GPIO_ENABLE);
832 info->gpio_fw = pdata->get_gpio(NFC_GPIO_FW_RESET);
833 info->gpio_irq = pdata->get_gpio(NFC_GPIO_IRQ);
834
835 pn544_hci_platform_init(info);
836
837 r = request_threaded_irq(client->irq, NULL, pn544_hci_irq_thread_fn,
838 IRQF_TRIGGER_RISING, PN544_HCI_DRIVER_NAME,
839 info);
840 if (r < 0) {
841 dev_err(&client->dev, "Unable to register IRQ handler\n");
842 goto err_rti;
843 }
844
845 init_data.gate_count = ARRAY_SIZE(pn544_custom_gates);
846
847 memcpy(init_data.gates, pn544_custom_gates,
848 ARRAY_SIZE(pn544_custom_gates));
849
850 /*
851 * TODO: Session id must include the driver name + some bus addr
852 * persistent info to discriminate 2 identical chips
853 */
854 strcpy(init_data.session_id, "ID544HCI");
855
856 protocols = NFC_PROTO_JEWEL_MASK |
857 NFC_PROTO_MIFARE_MASK |
858 NFC_PROTO_FELICA_MASK |
859 NFC_PROTO_ISO14443_MASK |
860 NFC_PROTO_NFC_DEP_MASK;
861
862 info->shdlc = nfc_shdlc_allocate(&pn544_shdlc_ops,
863 &init_data, protocols,
864 PN544_CMDS_HEADROOM, 0,
865 PN544_HCI_LLC_MAX_PAYLOAD,
866 dev_name(&client->dev));
867 if (!info->shdlc) {
868 dev_err(&client->dev, "Cannot allocate nfc shdlc.\n");
869 r = -ENOMEM;
870 goto err_allocshdlc;
871 }
872
873 nfc_shdlc_set_clientdata(info->shdlc, info);
874
875 return 0;
876
877err_allocshdlc:
878 free_irq(client->irq, info);
879
880err_rti:
881 if (pdata->free_resources != NULL)
882 pdata->free_resources();
883
884err_pdata:
885 kfree(info);
886
887err_info_alloc:
888 return r;
889}
890
891static __devexit int pn544_hci_remove(struct i2c_client *client)
892{
893 struct pn544_hci_info *info = i2c_get_clientdata(client);
894 struct pn544_nfc_platform_data *pdata = client->dev.platform_data;
895
896 dev_dbg(&client->dev, "%s\n", __func__);
897
898 nfc_shdlc_free(info->shdlc);
899
900 if (info->state != PN544_ST_COLD) {
901 if (pdata->disable)
902 pdata->disable();
903 }
904
905 free_irq(client->irq, info);
906 if (pdata->free_resources)
907 pdata->free_resources();
908
909 kfree(info);
910
911 return 0;
912}
913
914static struct i2c_driver pn544_hci_driver = {
915 .driver = {
916 .name = PN544_HCI_DRIVER_NAME,
917 },
918 .probe = pn544_hci_probe,
919 .id_table = pn544_hci_id_table,
920 .remove = __devexit_p(pn544_hci_remove),
921};
922
923static int __init pn544_hci_init(void)
924{
925 int r;
926
927 pr_debug(DRIVER_DESC ": %s\n", __func__);
928
929 r = i2c_add_driver(&pn544_hci_driver);
930 if (r) {
931 pr_err(PN544_HCI_DRIVER_NAME ": driver registration failed\n");
932 return r;
933 }
934
935 return 0;
936}
937
938static void __exit pn544_hci_exit(void)
939{
940 i2c_del_driver(&pn544_hci_driver);
941}
942
943module_init(pn544_hci_init);
944module_exit(pn544_hci_exit);
945
946MODULE_LICENSE("GPL");
947MODULE_DESCRIPTION(DRIVER_DESC);
Linux kernel - Deliverables
This page took 0.102839 seconds and 5 git commands to generate.