Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | menu "Bus options (PCI, PCMCIA, EISA, GSC, ISA)" |
2 | ||
3 | config GSC | |
4 | bool "VSC/GSC/HSC bus support" | |
5 | default y | |
6 | help | |
7 | The VSC, GSC and HSC busses were used from the earliest 700-series | |
8 | workstations up to and including the C360/J2240 workstations. They | |
9 | were also used in servers from the E-class to the K-class. They | |
10 | are not found in B1000, C3000, J5000, A500, L1000, N4000 and upwards. | |
11 | If in doubt, say "Y". | |
12 | ||
13 | config HPPB | |
14 | bool "HP-PB bus support" | |
15 | depends on GSC | |
16 | help | |
17 | The HP-PB bus was used in the Nova class and K-class servers. | |
18 | If in doubt, say "Y" | |
19 | ||
20 | config IOMMU_CCIO | |
21 | bool "U2/Uturn I/O MMU" | |
22 | depends on GSC | |
23 | help | |
24 | Say Y here to enable DMA management routines for the first | |
25 | generation of PA-RISC cache-coherent machines. Programs the | |
26 | U2/Uturn chip in "Virtual Mode" and use the I/O MMU. | |
27 | ||
28 | config GSC_LASI | |
29 | bool "Lasi I/O support" | |
30 | depends on GSC | |
31 | help | |
32 | Say Y here to support the Lasi multifunction chip found in | |
33 | many PA-RISC workstations & servers. It includes interfaces | |
34 | for a parallel port, serial port, NCR 53c710 SCSI, Apricot | |
35 | Ethernet, Harmony audio, PS/2 keyboard & mouse, ISDN, telephony | |
36 | and floppy. Note that you must still enable all the individual | |
37 | drivers for these chips. | |
38 | ||
39 | config GSC_WAX | |
40 | bool "Wax I/O support" | |
41 | depends on GSC | |
42 | help | |
43 | Say Y here to support the Wax multifunction chip found in some | |
44 | older systems, including B/C/D/R class and 715/64, 715/80 and | |
45 | 715/100. Wax includes an EISA adapter, a serial port (not always | |
46 | used), a HIL interface chip and is also known to be used as the | |
47 | GSC bridge for an X.25 GSC card. | |
48 | ||
49 | config EISA | |
50 | bool "EISA support" | |
51 | depends on GSC | |
52 | help | |
53 | Say Y here if you have an EISA bus in your machine. This code | |
54 | supports both the Mongoose & Wax EISA adapters. It is sadly | |
55 | incomplete and lacks support for card-to-host DMA. | |
56 | ||
57 | source "drivers/eisa/Kconfig" | |
58 | ||
59 | config ISA | |
60 | bool "ISA support" | |
61 | depends on EISA | |
62 | help | |
63 | If you want to plug an ISA card into your EISA bus, say Y here. | |
64 | Most people should say N. | |
65 | ||
66 | config PCI | |
67 | bool "PCI support" | |
68 | help | |
69 | All recent HP machines have PCI slots, and you should say Y here | |
70 | if you have a recent machine. If you are convinced you do not have | |
71 | PCI slots in your machine (eg a 712), then you may say "N" here. | |
72 | Beware that some GSC cards have a Dino onboard and PCI inside them, | |
73 | so it may be safest to say "Y" anyway. | |
74 | ||
75 | source "drivers/pci/Kconfig" | |
76 | ||
77 | config GSC_DINO | |
78 | bool "GSCtoPCI/Dino PCI support" | |
79 | depends on PCI && GSC | |
80 | help | |
81 | Say Y here to support the Dino & Cujo GSC to PCI bridges found in | |
82 | machines from the B132 to the C360, the J2240 and the A180. Some | |
83 | GSC/HSC cards (eg gigabit & dual 100 Mbit Ethernet) have a Dino on | |
84 | the card, and you also need to say Y here if you have such a card. | |
85 | Note that Dino also supplies one of the serial ports on certain | |
86 | machines. If in doubt, say Y. | |
87 | ||
88 | config PCI_LBA | |
89 | bool "LBA/Elroy PCI support" | |
90 | depends on PCI | |
91 | help | |
92 | Say Y here to support the Elroy PCI Lower Bus Adapter. This is | |
93 | present on B, C, J, L and N-class machines with 4-digit model | |
94 | numbers and the A400/A500. | |
95 | ||
96 | config IOSAPIC | |
97 | bool | |
98 | depends on PCI_LBA | |
99 | default PCI_LBA | |
100 | ||
101 | config IOMMU_SBA | |
102 | bool | |
103 | depends on PCI_LBA | |
104 | default PCI_LBA | |
105 | ||
46663448 FT |
106 | config IOMMU_HELPER |
107 | bool | |
108 | depends on IOMMU_SBA || IOMMU_CCIO | |
109 | default y | |
110 | ||
1da177e4 LT |
111 | source "drivers/pcmcia/Kconfig" |
112 | ||
113 | source "drivers/pci/hotplug/Kconfig" | |
114 | ||
115 | endmenu | |
116 | ||
117 | menu "PA-RISC specific drivers" | |
118 | ||
119 | config SUPERIO | |
120 | bool "SuperIO (SuckyIO) support" | |
121 | depends on PCI_LBA | |
122 | default y | |
123 | help | |
124 | Say Y here to support the SuperIO chip found in Bxxxx, C3xxx and | |
125 | J5xxx+ machines. This enables IDE, Floppy, Parallel Port, and | |
126 | Serial port on those machines. | |
127 | ||
128 | config CHASSIS_LCD_LED | |
129 | bool "Chassis LCD and LED support" | |
130 | default y | |
95bb2f0b | 131 | select VM_EVENT_COUNTERS |
1da177e4 LT |
132 | help |
133 | Say Y here if you want to enable support for the Heartbeat, | |
134 | Disk/Network activities LEDs on some PA-RISC machines, | |
135 | or support for the LCD that can be found on recent material. | |
136 | ||
137 | This has nothing to do with LED State support for A and E class. | |
138 | ||
139 | If unsure, say Y. | |
140 | ||
141 | config PDC_CHASSIS | |
8ffaeaf4 | 142 | bool "PDC chassis state codes support" |
1da177e4 LT |
143 | default y |
144 | help | |
8ffaeaf4 TV |
145 | Say Y here if you want to enable support for Chassis codes. |
146 | That includes support for LED State front panel as found on E | |
147 | class, and support for the GSP Virtual Front Panel (LED State and | |
148 | message logging) as found on high end servers such as A, L and | |
149 | N-class. | |
150 | This driver will also display progress messages on LCD display, | |
151 | such as "INI", "RUN" and "FLT", and might thus clobber messages | |
152 | shown by the LED/LCD driver. | |
153 | This driver updates the state panel (LED and/or LCD) upon system | |
154 | state change (eg: boot, shutdown or panic). | |
1da177e4 LT |
155 | |
156 | If unsure, say Y. | |
157 | ||
8ffaeaf4 TV |
158 | |
159 | config PDC_CHASSIS_WARN | |
160 | bool "PDC chassis warnings support" | |
161 | depends on PROC_FS | |
162 | default y | |
163 | help | |
164 | Say Y here if you want to enable support for Chassis warnings. | |
165 | This will add a proc entry '/proc/chassis' giving some information | |
166 | about the overall health state of the system. | |
167 | This includes NVRAM battery level, overtemp or failures such as | |
168 | fans or power units. | |
169 | ||
170 | If unsure, say Y. | |
171 | ||
172 | ||
1da177e4 LT |
173 | config PDC_STABLE |
174 | tristate "PDC Stable Storage support" | |
175 | depends on SYSFS | |
176 | default y | |
177 | help | |
178 | Say Y here if you want to enable support for accessing Stable Storage | |
179 | variables (PDC non volatile variables such as Primary Boot Path, | |
180 | Console Path, Autoboot, Autosearch, etc) through SysFS. | |
181 | ||
182 | If unsure, say Y. | |
183 | ||
184 | To compile this driver as a module, choose M here. | |
185 | The module will be called pdc_stable. | |
186 | ||
187 | endmenu |