Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * This file contains work-arounds for many known PCI hardware | |
3 | * bugs. Devices present only on certain architectures (host | |
4 | * bridges et cetera) should be handled in arch-specific code. | |
5 | * | |
6 | * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. | |
7 | * | |
8 | * Copyright (c) 1999 Martin Mares <mj@ucw.cz> | |
9 | * | |
7586269c DB |
10 | * Init/reset quirks for USB host controllers should be in the |
11 | * USB quirks file, where their drivers can access reuse it. | |
12 | * | |
1da177e4 LT |
13 | * The bridge optimization stuff has been removed. If you really |
14 | * have a silly BIOS which is unable to set your host bridge right, | |
15 | * use the PowerTweak utility (see http://powertweak.sourceforge.net). | |
16 | */ | |
17 | ||
1da177e4 LT |
18 | #include <linux/types.h> |
19 | #include <linux/kernel.h> | |
20 | #include <linux/pci.h> | |
21 | #include <linux/init.h> | |
22 | #include <linux/delay.h> | |
25be5e6c | 23 | #include <linux/acpi.h> |
bc56b9e0 | 24 | #include "pci.h" |
1da177e4 | 25 | |
bd8481e1 DT |
26 | /* The Mellanox Tavor device gives false positive parity errors |
27 | * Mark this device with a broken_parity_status, to allow | |
28 | * PCI scanning code to "skip" this now blacklisted device. | |
29 | */ | |
30 | static void __devinit quirk_mellanox_tavor(struct pci_dev *dev) | |
31 | { | |
32 | dev->broken_parity_status = 1; /* This device gives false positives */ | |
33 | } | |
34 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor); | |
35 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor); | |
36 | ||
1da177e4 LT |
37 | /* Deal with broken BIOS'es that neglect to enable passive release, |
38 | which can cause problems in combination with the 82441FX/PPro MTRRs */ | |
39 | static void __devinit quirk_passive_release(struct pci_dev *dev) | |
40 | { | |
41 | struct pci_dev *d = NULL; | |
42 | unsigned char dlc; | |
43 | ||
44 | /* We have to make sure a particular bit is set in the PIIX3 | |
45 | ISA bridge, so we have to go out and find it. */ | |
46 | while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { | |
47 | pci_read_config_byte(d, 0x82, &dlc); | |
48 | if (!(dlc & 1<<1)) { | |
49 | printk(KERN_ERR "PCI: PIIX3: Enabling Passive Release on %s\n", pci_name(d)); | |
50 | dlc |= 1<<1; | |
51 | pci_write_config_byte(d, 0x82, dlc); | |
52 | } | |
53 | } | |
54 | } | |
55 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release ); | |
56 | ||
57 | /* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround | |
58 | but VIA don't answer queries. If you happen to have good contacts at VIA | |
59 | ask them for me please -- Alan | |
60 | ||
61 | This appears to be BIOS not version dependent. So presumably there is a | |
62 | chipset level fix */ | |
63 | int isa_dma_bridge_buggy; /* Exported */ | |
64 | ||
65 | static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev) | |
66 | { | |
67 | if (!isa_dma_bridge_buggy) { | |
68 | isa_dma_bridge_buggy=1; | |
69 | printk(KERN_INFO "Activating ISA DMA hang workarounds.\n"); | |
70 | } | |
71 | } | |
72 | /* | |
73 | * Its not totally clear which chipsets are the problematic ones | |
74 | * We know 82C586 and 82C596 variants are affected. | |
75 | */ | |
76 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs ); | |
77 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs ); | |
78 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs ); | |
79 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs ); | |
80 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs ); | |
81 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs ); | |
82 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs ); | |
83 | ||
84 | int pci_pci_problems; | |
85 | ||
86 | /* | |
87 | * Chipsets where PCI->PCI transfers vanish or hang | |
88 | */ | |
89 | static void __devinit quirk_nopcipci(struct pci_dev *dev) | |
90 | { | |
91 | if ((pci_pci_problems & PCIPCI_FAIL)==0) { | |
92 | printk(KERN_INFO "Disabling direct PCI/PCI transfers.\n"); | |
93 | pci_pci_problems |= PCIPCI_FAIL; | |
94 | } | |
95 | } | |
96 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci ); | |
97 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci ); | |
98 | ||
99 | /* | |
100 | * Triton requires workarounds to be used by the drivers | |
101 | */ | |
102 | static void __devinit quirk_triton(struct pci_dev *dev) | |
103 | { | |
104 | if ((pci_pci_problems&PCIPCI_TRITON)==0) { | |
105 | printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n"); | |
106 | pci_pci_problems |= PCIPCI_TRITON; | |
107 | } | |
108 | } | |
109 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton ); | |
110 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton ); | |
111 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton ); | |
112 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton ); | |
113 | ||
114 | /* | |
115 | * VIA Apollo KT133 needs PCI latency patch | |
116 | * Made according to a windows driver based patch by George E. Breese | |
117 | * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm | |
118 | * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for | |
119 | * the info on which Mr Breese based his work. | |
120 | * | |
121 | * Updated based on further information from the site and also on | |
122 | * information provided by VIA | |
123 | */ | |
124 | static void __devinit quirk_vialatency(struct pci_dev *dev) | |
125 | { | |
126 | struct pci_dev *p; | |
127 | u8 rev; | |
128 | u8 busarb; | |
129 | /* Ok we have a potential problem chipset here. Now see if we have | |
130 | a buggy southbridge */ | |
131 | ||
132 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); | |
133 | if (p!=NULL) { | |
134 | pci_read_config_byte(p, PCI_CLASS_REVISION, &rev); | |
135 | /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */ | |
136 | /* Check for buggy part revisions */ | |
137 | if (rev < 0x40 || rev > 0x42) | |
138 | goto exit; | |
139 | } else { | |
140 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); | |
141 | if (p==NULL) /* No problem parts */ | |
142 | goto exit; | |
143 | pci_read_config_byte(p, PCI_CLASS_REVISION, &rev); | |
144 | /* Check for buggy part revisions */ | |
145 | if (rev < 0x10 || rev > 0x12) | |
146 | goto exit; | |
147 | } | |
148 | ||
149 | /* | |
150 | * Ok we have the problem. Now set the PCI master grant to | |
151 | * occur every master grant. The apparent bug is that under high | |
152 | * PCI load (quite common in Linux of course) you can get data | |
153 | * loss when the CPU is held off the bus for 3 bus master requests | |
154 | * This happens to include the IDE controllers.... | |
155 | * | |
156 | * VIA only apply this fix when an SB Live! is present but under | |
157 | * both Linux and Windows this isnt enough, and we have seen | |
158 | * corruption without SB Live! but with things like 3 UDMA IDE | |
159 | * controllers. So we ignore that bit of the VIA recommendation.. | |
160 | */ | |
161 | ||
162 | pci_read_config_byte(dev, 0x76, &busarb); | |
163 | /* Set bit 4 and bi 5 of byte 76 to 0x01 | |
164 | "Master priority rotation on every PCI master grant */ | |
165 | busarb &= ~(1<<5); | |
166 | busarb |= (1<<4); | |
167 | pci_write_config_byte(dev, 0x76, busarb); | |
168 | printk(KERN_INFO "Applying VIA southbridge workaround.\n"); | |
169 | exit: | |
170 | pci_dev_put(p); | |
171 | } | |
172 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency ); | |
173 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency ); | |
174 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency ); | |
175 | ||
176 | /* | |
177 | * VIA Apollo VP3 needs ETBF on BT848/878 | |
178 | */ | |
179 | static void __devinit quirk_viaetbf(struct pci_dev *dev) | |
180 | { | |
181 | if ((pci_pci_problems&PCIPCI_VIAETBF)==0) { | |
182 | printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n"); | |
183 | pci_pci_problems |= PCIPCI_VIAETBF; | |
184 | } | |
185 | } | |
186 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf ); | |
187 | ||
188 | static void __devinit quirk_vsfx(struct pci_dev *dev) | |
189 | { | |
190 | if ((pci_pci_problems&PCIPCI_VSFX)==0) { | |
191 | printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n"); | |
192 | pci_pci_problems |= PCIPCI_VSFX; | |
193 | } | |
194 | } | |
195 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx ); | |
196 | ||
197 | /* | |
198 | * Ali Magik requires workarounds to be used by the drivers | |
199 | * that DMA to AGP space. Latency must be set to 0xA and triton | |
200 | * workaround applied too | |
201 | * [Info kindly provided by ALi] | |
202 | */ | |
203 | static void __init quirk_alimagik(struct pci_dev *dev) | |
204 | { | |
205 | if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) { | |
206 | printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n"); | |
207 | pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON; | |
208 | } | |
209 | } | |
210 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik ); | |
211 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik ); | |
212 | ||
213 | /* | |
214 | * Natoma has some interesting boundary conditions with Zoran stuff | |
215 | * at least | |
216 | */ | |
217 | static void __devinit quirk_natoma(struct pci_dev *dev) | |
218 | { | |
219 | if ((pci_pci_problems&PCIPCI_NATOMA)==0) { | |
220 | printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n"); | |
221 | pci_pci_problems |= PCIPCI_NATOMA; | |
222 | } | |
223 | } | |
224 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma ); | |
225 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma ); | |
226 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma ); | |
227 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma ); | |
228 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma ); | |
229 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma ); | |
230 | ||
231 | /* | |
232 | * This chip can cause PCI parity errors if config register 0xA0 is read | |
233 | * while DMAs are occurring. | |
234 | */ | |
235 | static void __devinit quirk_citrine(struct pci_dev *dev) | |
236 | { | |
237 | dev->cfg_size = 0xA0; | |
238 | } | |
239 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine ); | |
240 | ||
241 | /* | |
242 | * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. | |
243 | * If it's needed, re-allocate the region. | |
244 | */ | |
245 | static void __devinit quirk_s3_64M(struct pci_dev *dev) | |
246 | { | |
247 | struct resource *r = &dev->resource[0]; | |
248 | ||
249 | if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) { | |
250 | r->start = 0; | |
251 | r->end = 0x3ffffff; | |
252 | } | |
253 | } | |
254 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M ); | |
255 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M ); | |
256 | ||
6693e74a LT |
257 | static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, |
258 | unsigned size, int nr, const char *name) | |
1da177e4 LT |
259 | { |
260 | region &= ~(size-1); | |
261 | if (region) { | |
085ae41f | 262 | struct pci_bus_region bus_region; |
1da177e4 LT |
263 | struct resource *res = dev->resource + nr; |
264 | ||
265 | res->name = pci_name(dev); | |
266 | res->start = region; | |
267 | res->end = region + size - 1; | |
268 | res->flags = IORESOURCE_IO; | |
085ae41f DM |
269 | |
270 | /* Convert from PCI bus to resource space. */ | |
271 | bus_region.start = res->start; | |
272 | bus_region.end = res->end; | |
273 | pcibios_bus_to_resource(dev, res, &bus_region); | |
274 | ||
1da177e4 | 275 | pci_claim_resource(dev, nr); |
6693e74a | 276 | printk("PCI quirk: region %04x-%04x claimed by %s\n", region, region + size - 1, name); |
1da177e4 LT |
277 | } |
278 | } | |
279 | ||
280 | /* | |
281 | * ATI Northbridge setups MCE the processor if you even | |
282 | * read somewhere between 0x3b0->0x3bb or read 0x3d3 | |
283 | */ | |
284 | static void __devinit quirk_ati_exploding_mce(struct pci_dev *dev) | |
285 | { | |
286 | printk(KERN_INFO "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.\n"); | |
287 | /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ | |
288 | request_region(0x3b0, 0x0C, "RadeonIGP"); | |
289 | request_region(0x3d3, 0x01, "RadeonIGP"); | |
290 | } | |
291 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce ); | |
292 | ||
293 | /* | |
294 | * Let's make the southbridge information explicit instead | |
295 | * of having to worry about people probing the ACPI areas, | |
296 | * for example.. (Yes, it happens, and if you read the wrong | |
297 | * ACPI register it will put the machine to sleep with no | |
298 | * way of waking it up again. Bummer). | |
299 | * | |
300 | * ALI M7101: Two IO regions pointed to by words at | |
301 | * 0xE0 (64 bytes of ACPI registers) | |
302 | * 0xE2 (32 bytes of SMB registers) | |
303 | */ | |
304 | static void __devinit quirk_ali7101_acpi(struct pci_dev *dev) | |
305 | { | |
306 | u16 region; | |
307 | ||
308 | pci_read_config_word(dev, 0xE0, ®ion); | |
6693e74a | 309 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); |
1da177e4 | 310 | pci_read_config_word(dev, 0xE2, ®ion); |
6693e74a | 311 | quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); |
1da177e4 LT |
312 | } |
313 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi ); | |
314 | ||
6693e74a LT |
315 | static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) |
316 | { | |
317 | u32 devres; | |
318 | u32 mask, size, base; | |
319 | ||
320 | pci_read_config_dword(dev, port, &devres); | |
321 | if ((devres & enable) != enable) | |
322 | return; | |
323 | mask = (devres >> 16) & 15; | |
324 | base = devres & 0xffff; | |
325 | size = 16; | |
326 | for (;;) { | |
327 | unsigned bit = size >> 1; | |
328 | if ((bit & mask) == bit) | |
329 | break; | |
330 | size = bit; | |
331 | } | |
332 | /* | |
333 | * For now we only print it out. Eventually we'll want to | |
334 | * reserve it (at least if it's in the 0x1000+ range), but | |
335 | * let's get enough confirmation reports first. | |
336 | */ | |
337 | base &= -size; | |
338 | printk("%s PIO at %04x-%04x\n", name, base, base + size - 1); | |
339 | } | |
340 | ||
341 | static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) | |
342 | { | |
343 | u32 devres; | |
344 | u32 mask, size, base; | |
345 | ||
346 | pci_read_config_dword(dev, port, &devres); | |
347 | if ((devres & enable) != enable) | |
348 | return; | |
349 | base = devres & 0xffff0000; | |
350 | mask = (devres & 0x3f) << 16; | |
351 | size = 128 << 16; | |
352 | for (;;) { | |
353 | unsigned bit = size >> 1; | |
354 | if ((bit & mask) == bit) | |
355 | break; | |
356 | size = bit; | |
357 | } | |
358 | /* | |
359 | * For now we only print it out. Eventually we'll want to | |
360 | * reserve it, but let's get enough confirmation reports first. | |
361 | */ | |
362 | base &= -size; | |
363 | printk("%s MMIO at %04x-%04x\n", name, base, base + size - 1); | |
364 | } | |
365 | ||
1da177e4 LT |
366 | /* |
367 | * PIIX4 ACPI: Two IO regions pointed to by longwords at | |
368 | * 0x40 (64 bytes of ACPI registers) | |
08db2a70 | 369 | * 0x90 (16 bytes of SMB registers) |
6693e74a | 370 | * and a few strange programmable PIIX4 device resources. |
1da177e4 LT |
371 | */ |
372 | static void __devinit quirk_piix4_acpi(struct pci_dev *dev) | |
373 | { | |
6693e74a | 374 | u32 region, res_a; |
1da177e4 LT |
375 | |
376 | pci_read_config_dword(dev, 0x40, ®ion); | |
6693e74a | 377 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); |
1da177e4 | 378 | pci_read_config_dword(dev, 0x90, ®ion); |
08db2a70 | 379 | quirk_io_region(dev, region, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); |
6693e74a LT |
380 | |
381 | /* Device resource A has enables for some of the other ones */ | |
382 | pci_read_config_dword(dev, 0x5c, &res_a); | |
383 | ||
384 | piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21); | |
385 | piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21); | |
386 | ||
387 | /* Device resource D is just bitfields for static resources */ | |
388 | ||
389 | /* Device 12 enabled? */ | |
390 | if (res_a & (1 << 29)) { | |
391 | piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20); | |
392 | piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7); | |
393 | } | |
394 | /* Device 13 enabled? */ | |
395 | if (res_a & (1 << 30)) { | |
396 | piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20); | |
397 | piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7); | |
398 | } | |
399 | piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20); | |
400 | piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20); | |
1da177e4 LT |
401 | } |
402 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi ); | |
c6764664 | 403 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi ); |
1da177e4 LT |
404 | |
405 | /* | |
406 | * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at | |
407 | * 0x40 (128 bytes of ACPI, GPIO & TCO registers) | |
408 | * 0x58 (64 bytes of GPIO I/O space) | |
409 | */ | |
410 | static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev) | |
411 | { | |
412 | u32 region; | |
413 | ||
414 | pci_read_config_dword(dev, 0x40, ®ion); | |
6693e74a | 415 | quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH4 ACPI/GPIO/TCO"); |
1da177e4 LT |
416 | |
417 | pci_read_config_dword(dev, 0x58, ®ion); | |
6693e74a | 418 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH4 GPIO"); |
1da177e4 LT |
419 | } |
420 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi ); | |
421 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi ); | |
422 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi ); | |
423 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi ); | |
424 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi ); | |
425 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi ); | |
426 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi ); | |
427 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi ); | |
428 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi ); | |
3aa8c4fe | 429 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi ); |
1da177e4 | 430 | |
2cea752f M |
431 | static void __devinit quirk_ich6_lpc_acpi(struct pci_dev *dev) |
432 | { | |
433 | u32 region; | |
434 | ||
435 | pci_read_config_dword(dev, 0x40, ®ion); | |
436 | quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH6 ACPI/GPIO/TCO"); | |
437 | ||
438 | pci_read_config_dword(dev, 0x48, ®ion); | |
439 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH6 GPIO"); | |
440 | } | |
65ae4ddd | 441 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc_acpi ); |
2cea752f M |
442 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc_acpi ); |
443 | ||
1da177e4 LT |
444 | /* |
445 | * VIA ACPI: One IO region pointed to by longword at | |
446 | * 0x48 or 0x20 (256 bytes of ACPI registers) | |
447 | */ | |
448 | static void __devinit quirk_vt82c586_acpi(struct pci_dev *dev) | |
449 | { | |
450 | u8 rev; | |
451 | u32 region; | |
452 | ||
453 | pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev); | |
454 | if (rev & 0x10) { | |
455 | pci_read_config_dword(dev, 0x48, ®ion); | |
456 | region &= PCI_BASE_ADDRESS_IO_MASK; | |
6693e74a | 457 | quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES, "vt82c586 ACPI"); |
1da177e4 LT |
458 | } |
459 | } | |
460 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi ); | |
461 | ||
462 | /* | |
463 | * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at | |
464 | * 0x48 (256 bytes of ACPI registers) | |
465 | * 0x70 (128 bytes of hardware monitoring register) | |
466 | * 0x90 (16 bytes of SMB registers) | |
467 | */ | |
468 | static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev) | |
469 | { | |
470 | u16 hm; | |
471 | u32 smb; | |
472 | ||
473 | quirk_vt82c586_acpi(dev); | |
474 | ||
475 | pci_read_config_word(dev, 0x70, &hm); | |
476 | hm &= PCI_BASE_ADDRESS_IO_MASK; | |
02f313b2 | 477 | quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1, "vt82c686 HW-mon"); |
1da177e4 LT |
478 | |
479 | pci_read_config_dword(dev, 0x90, &smb); | |
480 | smb &= PCI_BASE_ADDRESS_IO_MASK; | |
02f313b2 | 481 | quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2, "vt82c686 SMB"); |
1da177e4 LT |
482 | } |
483 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi ); | |
484 | ||
6d85f29b IK |
485 | /* |
486 | * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at | |
487 | * 0x88 (128 bytes of power management registers) | |
488 | * 0xd0 (16 bytes of SMB registers) | |
489 | */ | |
490 | static void __devinit quirk_vt8235_acpi(struct pci_dev *dev) | |
491 | { | |
492 | u16 pm, smb; | |
493 | ||
494 | pci_read_config_word(dev, 0x88, &pm); | |
495 | pm &= PCI_BASE_ADDRESS_IO_MASK; | |
6693e74a | 496 | quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); |
6d85f29b IK |
497 | |
498 | pci_read_config_word(dev, 0xd0, &smb); | |
499 | smb &= PCI_BASE_ADDRESS_IO_MASK; | |
6693e74a | 500 | quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1, "vt8235 SMB"); |
6d85f29b IK |
501 | } |
502 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); | |
503 | ||
1da177e4 LT |
504 | |
505 | #ifdef CONFIG_X86_IO_APIC | |
506 | ||
507 | #include <asm/io_apic.h> | |
508 | ||
509 | /* | |
510 | * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip | |
511 | * devices to the external APIC. | |
512 | * | |
513 | * TODO: When we have device-specific interrupt routers, | |
514 | * this code will go away from quirks. | |
515 | */ | |
516 | static void __devinit quirk_via_ioapic(struct pci_dev *dev) | |
517 | { | |
518 | u8 tmp; | |
519 | ||
520 | if (nr_ioapics < 1) | |
521 | tmp = 0; /* nothing routed to external APIC */ | |
522 | else | |
523 | tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ | |
524 | ||
525 | printk(KERN_INFO "PCI: %sbling Via external APIC routing\n", | |
526 | tmp == 0 ? "Disa" : "Ena"); | |
527 | ||
528 | /* Offset 0x58: External APIC IRQ output control */ | |
529 | pci_write_config_byte (dev, 0x58, tmp); | |
530 | } | |
531 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic ); | |
532 | ||
a1740913 KW |
533 | /* |
534 | * VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit. | |
535 | * This leads to doubled level interrupt rates. | |
536 | * Set this bit to get rid of cycle wastage. | |
537 | * Otherwise uncritical. | |
538 | */ | |
539 | static void __devinit quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) | |
540 | { | |
541 | u8 misc_control2; | |
542 | #define BYPASS_APIC_DEASSERT 8 | |
543 | ||
544 | pci_read_config_byte(dev, 0x5B, &misc_control2); | |
545 | if (!(misc_control2 & BYPASS_APIC_DEASSERT)) { | |
546 | printk(KERN_INFO "PCI: Bypassing VIA 8237 APIC De-Assert Message\n"); | |
547 | pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT); | |
548 | } | |
549 | } | |
550 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); | |
551 | ||
1da177e4 LT |
552 | /* |
553 | * The AMD io apic can hang the box when an apic irq is masked. | |
554 | * We check all revs >= B0 (yet not in the pre production!) as the bug | |
555 | * is currently marked NoFix | |
556 | * | |
557 | * We have multiple reports of hangs with this chipset that went away with | |
558 | * noapic specified. For the moment we assume its the errata. We may be wrong | |
559 | * of course. However the advice is demonstrably good even if so.. | |
560 | */ | |
561 | static void __devinit quirk_amd_ioapic(struct pci_dev *dev) | |
562 | { | |
563 | u8 rev; | |
564 | ||
565 | pci_read_config_byte(dev, PCI_REVISION_ID, &rev); | |
566 | if (rev >= 0x02) { | |
567 | printk(KERN_WARNING "I/O APIC: AMD Errata #22 may be present. In the event of instability try\n"); | |
568 | printk(KERN_WARNING " : booting with the \"noapic\" option.\n"); | |
569 | } | |
570 | } | |
571 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic ); | |
572 | ||
573 | static void __init quirk_ioapic_rmw(struct pci_dev *dev) | |
574 | { | |
575 | if (dev->devfn == 0 && dev->bus->number == 0) | |
576 | sis_apic_bug = 1; | |
577 | } | |
578 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw ); | |
579 | ||
1da177e4 LT |
580 | #define AMD8131_revA0 0x01 |
581 | #define AMD8131_revB0 0x11 | |
582 | #define AMD8131_MISC 0x40 | |
583 | #define AMD8131_NIOAMODE_BIT 0 | |
584 | static void __init quirk_amd_8131_ioapic(struct pci_dev *dev) | |
585 | { | |
586 | unsigned char revid, tmp; | |
587 | ||
1da177e4 LT |
588 | if (nr_ioapics == 0) |
589 | return; | |
590 | ||
591 | pci_read_config_byte(dev, PCI_REVISION_ID, &revid); | |
592 | if (revid == AMD8131_revA0 || revid == AMD8131_revB0) { | |
593 | printk(KERN_INFO "Fixing up AMD8131 IOAPIC mode\n"); | |
594 | pci_read_config_byte( dev, AMD8131_MISC, &tmp); | |
595 | tmp &= ~(1 << AMD8131_NIOAMODE_BIT); | |
596 | pci_write_config_byte( dev, AMD8131_MISC, tmp); | |
597 | } | |
598 | } | |
5da594b1 | 599 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic); |
1da177e4 LT |
600 | #endif /* CONFIG_X86_IO_APIC */ |
601 | ||
602 | ||
1da177e4 LT |
603 | /* |
604 | * FIXME: it is questionable that quirk_via_acpi | |
605 | * is needed. It shows up as an ISA bridge, and does not | |
606 | * support the PCI_INTERRUPT_LINE register at all. Therefore | |
607 | * it seems like setting the pci_dev's 'irq' to the | |
608 | * value of the ACPI SCI interrupt is only done for convenience. | |
609 | * -jgarzik | |
610 | */ | |
611 | static void __devinit quirk_via_acpi(struct pci_dev *d) | |
612 | { | |
613 | /* | |
614 | * VIA ACPI device: SCI IRQ line in PCI config byte 0x42 | |
615 | */ | |
616 | u8 irq; | |
617 | pci_read_config_byte(d, 0x42, &irq); | |
618 | irq &= 0xf; | |
619 | if (irq && (irq != 2)) | |
620 | d->irq = irq; | |
621 | } | |
622 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi ); | |
623 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi ); | |
624 | ||
93cffffa BH |
625 | /* |
626 | * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip | |
627 | * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature: | |
628 | * when written, it makes an internal connection to the PIC. | |
629 | * For these devices, this register is defined to be 4 bits wide. | |
630 | * Normally this is fine. However for IO-APIC motherboards, or | |
631 | * non-x86 architectures (yes Via exists on PPC among other places), | |
632 | * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get | |
633 | * interrupts delivered properly. | |
a7b862f6 CW |
634 | * |
635 | * Some of the on-chip devices are actually '586 devices' so they are | |
636 | * listed here. | |
93cffffa BH |
637 | */ |
638 | static void quirk_via_irq(struct pci_dev *dev) | |
25be5e6c LB |
639 | { |
640 | u8 irq, new_irq; | |
641 | ||
25be5e6c LB |
642 | new_irq = dev->irq & 0xf; |
643 | pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); | |
644 | if (new_irq != irq) { | |
75cf7456 | 645 | printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n", |
25be5e6c LB |
646 | pci_name(dev), irq, new_irq); |
647 | udelay(15); /* unknown if delay really needed */ | |
648 | pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); | |
649 | } | |
650 | } | |
a7b862f6 CW |
651 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_via_irq); |
652 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq); | |
653 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq); | |
654 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq); | |
1ae4f9ba | 655 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, quirk_via_irq); |
75cf7456 CW |
656 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq); |
657 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq); | |
658 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq); | |
25be5e6c | 659 | |
1da177e4 LT |
660 | /* |
661 | * VIA VT82C598 has its device ID settable and many BIOSes | |
662 | * set it to the ID of VT82C597 for backward compatibility. | |
663 | * We need to switch it off to be able to recognize the real | |
664 | * type of the chip. | |
665 | */ | |
666 | static void __devinit quirk_vt82c598_id(struct pci_dev *dev) | |
667 | { | |
668 | pci_write_config_byte(dev, 0xfc, 0); | |
669 | pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); | |
670 | } | |
671 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id ); | |
672 | ||
709cf5ea MG |
673 | #ifdef CONFIG_ACPI_SLEEP |
674 | ||
675 | /* | |
676 | * Some VIA systems boot with the abnormal status flag set. This can cause | |
677 | * the BIOS to re-POST the system on resume rather than passing control | |
678 | * back to the OS. Clear the flag on boot | |
679 | */ | |
680 | static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev) | |
681 | { | |
682 | u32 reg; | |
683 | ||
684 | acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS, | |
685 | ®); | |
686 | ||
687 | if (reg & 0x800) { | |
688 | printk("Clearing abnormal poweroff flag\n"); | |
689 | acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK, | |
690 | ACPI_REGISTER_PM1_STATUS, | |
691 | (u16)0x800); | |
692 | } | |
693 | } | |
694 | ||
695 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff); | |
696 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff); | |
697 | ||
698 | #endif | |
699 | ||
1da177e4 LT |
700 | /* |
701 | * CardBus controllers have a legacy base address that enables them | |
702 | * to respond as i82365 pcmcia controllers. We don't want them to | |
703 | * do this even if the Linux CardBus driver is not loaded, because | |
704 | * the Linux i82365 driver does not (and should not) handle CardBus. | |
705 | */ | |
706 | static void __devinit quirk_cardbus_legacy(struct pci_dev *dev) | |
707 | { | |
708 | if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class) | |
709 | return; | |
710 | pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); | |
711 | } | |
712 | DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy); | |
713 | ||
714 | /* | |
715 | * Following the PCI ordering rules is optional on the AMD762. I'm not | |
716 | * sure what the designers were smoking but let's not inhale... | |
717 | * | |
718 | * To be fair to AMD, it follows the spec by default, its BIOS people | |
719 | * who turn it off! | |
720 | */ | |
721 | static void __devinit quirk_amd_ordering(struct pci_dev *dev) | |
722 | { | |
723 | u32 pcic; | |
724 | pci_read_config_dword(dev, 0x4C, &pcic); | |
725 | if ((pcic&6)!=6) { | |
726 | pcic |= 6; | |
727 | printk(KERN_WARNING "BIOS failed to enable PCI standards compliance, fixing this error.\n"); | |
728 | pci_write_config_dword(dev, 0x4C, pcic); | |
729 | pci_read_config_dword(dev, 0x84, &pcic); | |
730 | pcic |= (1<<23); /* Required in this mode */ | |
731 | pci_write_config_dword(dev, 0x84, pcic); | |
732 | } | |
733 | } | |
734 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering ); | |
735 | ||
736 | /* | |
737 | * DreamWorks provided workaround for Dunord I-3000 problem | |
738 | * | |
739 | * This card decodes and responds to addresses not apparently | |
740 | * assigned to it. We force a larger allocation to ensure that | |
741 | * nothing gets put too close to it. | |
742 | */ | |
743 | static void __devinit quirk_dunord ( struct pci_dev * dev ) | |
744 | { | |
745 | struct resource *r = &dev->resource [1]; | |
746 | r->start = 0; | |
747 | r->end = 0xffffff; | |
748 | } | |
749 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord ); | |
750 | ||
751 | /* | |
752 | * i82380FB mobile docking controller: its PCI-to-PCI bridge | |
753 | * is subtractive decoding (transparent), and does indicate this | |
754 | * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80 | |
755 | * instead of 0x01. | |
756 | */ | |
757 | static void __devinit quirk_transparent_bridge(struct pci_dev *dev) | |
758 | { | |
759 | dev->transparent = 1; | |
760 | } | |
761 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge ); | |
762 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge ); | |
763 | ||
764 | /* | |
765 | * Common misconfiguration of the MediaGX/Geode PCI master that will | |
766 | * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 | |
767 | * datasheets found at http://www.national.com/ds/GX for info on what | |
768 | * these bits do. <christer@weinigel.se> | |
769 | */ | |
770 | static void __init quirk_mediagx_master(struct pci_dev *dev) | |
771 | { | |
772 | u8 reg; | |
773 | pci_read_config_byte(dev, 0x41, ®); | |
774 | if (reg & 2) { | |
775 | reg &= ~2; | |
776 | printk(KERN_INFO "PCI: Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", reg); | |
777 | pci_write_config_byte(dev, 0x41, reg); | |
778 | } | |
779 | } | |
780 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master ); | |
781 | ||
782 | /* | |
783 | * As per PCI spec, ignore base address registers 0-3 of the IDE controllers | |
784 | * running in Compatible mode (bits 0 and 2 in the ProgIf for primary and | |
785 | * secondary channels respectively). If the device reports Compatible mode | |
786 | * but does use BAR0-3 for address decoding, we assume that firmware has | |
787 | * programmed these BARs with standard values (0x1f0,0x3f4 and 0x170,0x374). | |
788 | * Exceptions (if they exist) must be handled in chip/architecture specific | |
789 | * fixups. | |
790 | * | |
791 | * Note: for non x86 people. You may need an arch specific quirk to handle | |
792 | * moving IDE devices to native mode as well. Some plug in card devices power | |
793 | * up in compatible mode and assume the BIOS will adjust them. | |
794 | * | |
795 | * Q: should we load the 0x1f0,0x3f4 into the registers or zap them as | |
796 | * we do now ? We don't want is pci_enable_device to come along | |
797 | * and assign new resources. Both approaches work for that. | |
798 | */ | |
799 | static void __devinit quirk_ide_bases(struct pci_dev *dev) | |
800 | { | |
801 | struct resource *res; | |
802 | int first_bar = 2, last_bar = 0; | |
803 | ||
804 | if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) | |
805 | return; | |
806 | ||
807 | res = &dev->resource[0]; | |
808 | ||
809 | /* primary channel: ProgIf bit 0, BAR0, BAR1 */ | |
810 | if (!(dev->class & 1) && (res[0].flags || res[1].flags)) { | |
811 | res[0].start = res[0].end = res[0].flags = 0; | |
812 | res[1].start = res[1].end = res[1].flags = 0; | |
813 | first_bar = 0; | |
814 | last_bar = 1; | |
815 | } | |
816 | ||
817 | /* secondary channel: ProgIf bit 2, BAR2, BAR3 */ | |
818 | if (!(dev->class & 4) && (res[2].flags || res[3].flags)) { | |
819 | res[2].start = res[2].end = res[2].flags = 0; | |
820 | res[3].start = res[3].end = res[3].flags = 0; | |
821 | last_bar = 3; | |
822 | } | |
823 | ||
824 | if (!last_bar) | |
825 | return; | |
826 | ||
827 | printk(KERN_INFO "PCI: Ignoring BAR%d-%d of IDE controller %s\n", | |
828 | first_bar, last_bar, pci_name(dev)); | |
829 | } | |
830 | DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_ide_bases); | |
831 | ||
832 | /* | |
833 | * Ensure C0 rev restreaming is off. This is normally done by | |
834 | * the BIOS but in the odd case it is not the results are corruption | |
835 | * hence the presence of a Linux check | |
836 | */ | |
837 | static void __init quirk_disable_pxb(struct pci_dev *pdev) | |
838 | { | |
839 | u16 config; | |
840 | u8 rev; | |
841 | ||
842 | pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); | |
843 | if (rev != 0x04) /* Only C0 requires this */ | |
844 | return; | |
845 | pci_read_config_word(pdev, 0x40, &config); | |
846 | if (config & (1<<6)) { | |
847 | config &= ~(1<<6); | |
848 | pci_write_config_word(pdev, 0x40, config); | |
849 | printk(KERN_INFO "PCI: C0 revision 450NX. Disabling PCI restreaming.\n"); | |
850 | } | |
851 | } | |
852 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb ); | |
853 | ||
1da177e4 LT |
854 | |
855 | /* | |
856 | * Serverworks CSB5 IDE does not fully support native mode | |
857 | */ | |
858 | static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev) | |
859 | { | |
860 | u8 prog; | |
861 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); | |
862 | if (prog & 5) { | |
863 | prog &= ~5; | |
864 | pdev->class &= ~5; | |
865 | pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); | |
866 | /* need to re-assign BARs for compat mode */ | |
867 | quirk_ide_bases(pdev); | |
868 | } | |
869 | } | |
870 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide ); | |
871 | ||
872 | /* | |
873 | * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same | |
874 | */ | |
875 | static void __init quirk_ide_samemode(struct pci_dev *pdev) | |
876 | { | |
877 | u8 prog; | |
878 | ||
879 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); | |
880 | ||
881 | if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) { | |
882 | printk(KERN_INFO "PCI: IDE mode mismatch; forcing legacy mode\n"); | |
883 | prog &= ~5; | |
884 | pdev->class &= ~5; | |
885 | pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); | |
886 | /* need to re-assign BARs for compat mode */ | |
887 | quirk_ide_bases(pdev); | |
888 | } | |
889 | } | |
890 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); | |
891 | ||
892 | /* This was originally an Alpha specific thing, but it really fits here. | |
893 | * The i82375 PCI/EISA bridge appears as non-classified. Fix that. | |
894 | */ | |
895 | static void __init quirk_eisa_bridge(struct pci_dev *dev) | |
896 | { | |
897 | dev->class = PCI_CLASS_BRIDGE_EISA << 8; | |
898 | } | |
899 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge ); | |
900 | ||
7daa0c4f JG |
901 | /* |
902 | * On the MSI-K8T-Neo2Fir Board, the internal Soundcard is disabled | |
903 | * when a PCI-Soundcard is added. The BIOS only gives Options | |
904 | * "Disabled" and "AUTO". This Quirk Sets the corresponding | |
905 | * Register-Value to enable the Soundcard. | |
bd91fde9 CW |
906 | * |
907 | * FIXME: Presently this quirk will run on anything that has an 8237 | |
908 | * which isn't correct, we need to check DMI tables or something in | |
909 | * order to make sure it only runs on the MSI-K8T-Neo2Fir. Because it | |
910 | * runs everywhere at present we suppress the printk output in most | |
911 | * irrelevant cases. | |
7daa0c4f JG |
912 | */ |
913 | static void __init k8t_sound_hostbridge(struct pci_dev *dev) | |
914 | { | |
915 | unsigned char val; | |
916 | ||
7daa0c4f JG |
917 | pci_read_config_byte(dev, 0x50, &val); |
918 | if (val == 0x88 || val == 0xc8) { | |
bd91fde9 CW |
919 | /* Assume it's probably a MSI-K8T-Neo2Fir */ |
920 | printk(KERN_INFO "PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON\n"); | |
7daa0c4f JG |
921 | pci_write_config_byte(dev, 0x50, val & (~0x40)); |
922 | ||
923 | /* Verify the Change for Status output */ | |
924 | pci_read_config_byte(dev, 0x50, &val); | |
925 | if (val & 0x40) | |
bd91fde9 | 926 | printk(KERN_INFO "PCI: MSI-K8T-Neo2Fir, soundcard still off\n"); |
7daa0c4f | 927 | else |
bd91fde9 | 928 | printk(KERN_INFO "PCI: MSI-K8T-Neo2Fir, soundcard on\n"); |
7daa0c4f | 929 | } |
7daa0c4f JG |
930 | } |
931 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge); | |
932 | ||
ce007ea5 | 933 | #ifndef CONFIG_ACPI_SLEEP |
1da177e4 LT |
934 | /* |
935 | * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge | |
936 | * is not activated. The myth is that Asus said that they do not want the | |
937 | * users to be irritated by just another PCI Device in the Win98 device | |
938 | * manager. (see the file prog/hotplug/README.p4b in the lm_sensors | |
939 | * package 2.7.0 for details) | |
940 | * | |
941 | * The SMBus PCI Device can be activated by setting a bit in the ICH LPC | |
942 | * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it | |
943 | * becomes necessary to do this tweak in two steps -- I've chosen the Host | |
944 | * bridge as trigger. | |
ce007ea5 CDH |
945 | * |
946 | * Actually, leaving it unhidden and not redoing the quirk over suspend2ram | |
947 | * will cause thermal management to break down, and causing machine to | |
948 | * overheat. | |
1da177e4 | 949 | */ |
ce007ea5 | 950 | static int __initdata asus_hides_smbus; |
1da177e4 LT |
951 | |
952 | static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) | |
953 | { | |
954 | if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { | |
955 | if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) | |
956 | switch(dev->subsystem_device) { | |
a00db371 | 957 | case 0x8025: /* P4B-LX */ |
1da177e4 LT |
958 | case 0x8070: /* P4B */ |
959 | case 0x8088: /* P4B533 */ | |
960 | case 0x1626: /* L3C notebook */ | |
961 | asus_hides_smbus = 1; | |
962 | } | |
963 | if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) | |
964 | switch(dev->subsystem_device) { | |
965 | case 0x80b1: /* P4GE-V */ | |
966 | case 0x80b2: /* P4PE */ | |
967 | case 0x8093: /* P4B533-V */ | |
968 | asus_hides_smbus = 1; | |
969 | } | |
970 | if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB) | |
971 | switch(dev->subsystem_device) { | |
972 | case 0x8030: /* P4T533 */ | |
973 | asus_hides_smbus = 1; | |
974 | } | |
975 | if (dev->device == PCI_DEVICE_ID_INTEL_7205_0) | |
976 | switch (dev->subsystem_device) { | |
977 | case 0x8070: /* P4G8X Deluxe */ | |
978 | asus_hides_smbus = 1; | |
979 | } | |
321311af JD |
980 | if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH) |
981 | switch (dev->subsystem_device) { | |
982 | case 0x80c9: /* PU-DLS */ | |
983 | asus_hides_smbus = 1; | |
984 | } | |
1da177e4 LT |
985 | if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) |
986 | switch (dev->subsystem_device) { | |
987 | case 0x1751: /* M2N notebook */ | |
988 | case 0x1821: /* M5N notebook */ | |
989 | asus_hides_smbus = 1; | |
990 | } | |
991 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
992 | switch (dev->subsystem_device) { | |
993 | case 0x184b: /* W1N notebook */ | |
994 | case 0x186a: /* M6Ne notebook */ | |
995 | asus_hides_smbus = 1; | |
996 | } | |
acc06632 M |
997 | if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) { |
998 | switch (dev->subsystem_device) { | |
999 | case 0x1882: /* M6V notebook */ | |
2d1e1c75 | 1000 | case 0x1977: /* A6VA notebook */ |
acc06632 M |
1001 | asus_hides_smbus = 1; |
1002 | } | |
1003 | } | |
1da177e4 LT |
1004 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { |
1005 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
1006 | switch(dev->subsystem_device) { | |
1007 | case 0x088C: /* HP Compaq nc8000 */ | |
1008 | case 0x0890: /* HP Compaq nc6000 */ | |
1009 | asus_hides_smbus = 1; | |
1010 | } | |
1011 | if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) | |
1012 | switch (dev->subsystem_device) { | |
1013 | case 0x12bc: /* HP D330L */ | |
e3b1bd57 | 1014 | case 0x12bd: /* HP D530 */ |
1da177e4 LT |
1015 | asus_hides_smbus = 1; |
1016 | } | |
3c0a654e | 1017 | if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) { |
1018 | switch (dev->subsystem_device) { | |
1019 | case 0x099c: /* HP Compaq nx6110 */ | |
1020 | asus_hides_smbus = 1; | |
1021 | } | |
1022 | } | |
1da177e4 LT |
1023 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) { |
1024 | if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) | |
1025 | switch(dev->subsystem_device) { | |
1026 | case 0x0001: /* Toshiba Satellite A40 */ | |
1027 | asus_hides_smbus = 1; | |
1028 | } | |
e96e2f14 DG |
1029 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) |
1030 | switch(dev->subsystem_device) { | |
1031 | case 0x0001: /* Toshiba Tecra M2 */ | |
1032 | asus_hides_smbus = 1; | |
1033 | } | |
1da177e4 LT |
1034 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { |
1035 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
1036 | switch(dev->subsystem_device) { | |
1037 | case 0xC00C: /* Samsung P35 notebook */ | |
1038 | asus_hides_smbus = 1; | |
1039 | } | |
c87f883e RIZ |
1040 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { |
1041 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
1042 | switch(dev->subsystem_device) { | |
1043 | case 0x0058: /* Compaq Evo N620c */ | |
1044 | asus_hides_smbus = 1; | |
1045 | } | |
1da177e4 LT |
1046 | } |
1047 | } | |
1048 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge ); | |
1049 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge ); | |
1050 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge ); | |
1051 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge ); | |
1052 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge ); | |
321311af | 1053 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge ); |
1da177e4 LT |
1054 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge ); |
1055 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge ); | |
acc06632 | 1056 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge ); |
1da177e4 LT |
1057 | |
1058 | static void __init asus_hides_smbus_lpc(struct pci_dev *dev) | |
1059 | { | |
1060 | u16 val; | |
1061 | ||
1062 | if (likely(!asus_hides_smbus)) | |
1063 | return; | |
1064 | ||
1065 | pci_read_config_word(dev, 0xF2, &val); | |
1066 | if (val & 0x8) { | |
1067 | pci_write_config_word(dev, 0xF2, val & (~0x8)); | |
1068 | pci_read_config_word(dev, 0xF2, &val); | |
1069 | if (val & 0x8) | |
1070 | printk(KERN_INFO "PCI: i801 SMBus device continues to play 'hide and seek'! 0x%x\n", val); | |
1071 | else | |
1072 | printk(KERN_INFO "PCI: Enabled i801 SMBus device\n"); | |
1073 | } | |
1074 | } | |
1075 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc ); | |
1076 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc ); | |
321311af | 1077 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc ); |
1da177e4 LT |
1078 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc ); |
1079 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc ); | |
1080 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc ); | |
1081 | ||
acc06632 M |
1082 | static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev) |
1083 | { | |
1084 | u32 val, rcba; | |
1085 | void __iomem *base; | |
1086 | ||
1087 | if (likely(!asus_hides_smbus)) | |
1088 | return; | |
1089 | pci_read_config_dword(dev, 0xF0, &rcba); | |
1090 | base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); /* use bits 31:14, 16 kB aligned */ | |
1091 | if (base == NULL) return; | |
1092 | val=readl(base + 0x3418); /* read the Function Disable register, dword mode only */ | |
1093 | writel(val & 0xFFFFFFF7, base + 0x3418); /* enable the SMBus device */ | |
1094 | iounmap(base); | |
1095 | printk(KERN_INFO "PCI: Enabled ICH6/i801 SMBus device\n"); | |
1096 | } | |
1097 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 ); | |
1098 | ||
ce007ea5 CDH |
1099 | #endif |
1100 | ||
1da177e4 LT |
1101 | /* |
1102 | * SiS 96x south bridge: BIOS typically hides SMBus device... | |
1103 | */ | |
1104 | static void __init quirk_sis_96x_smbus(struct pci_dev *dev) | |
1105 | { | |
1106 | u8 val = 0; | |
1107 | printk(KERN_INFO "Enabling SiS 96x SMBus.\n"); | |
1108 | pci_read_config_byte(dev, 0x77, &val); | |
1109 | pci_write_config_byte(dev, 0x77, val & ~0x10); | |
1110 | pci_read_config_byte(dev, 0x77, &val); | |
1111 | } | |
1112 | ||
1da177e4 LT |
1113 | /* |
1114 | * ... This is further complicated by the fact that some SiS96x south | |
1115 | * bridges pretend to be 85C503/5513 instead. In that case see if we | |
1116 | * spotted a compatible north bridge to make sure. | |
1117 | * (pci_find_device doesn't work yet) | |
1118 | * | |
1119 | * We can also enable the sis96x bit in the discovery register.. | |
1120 | */ | |
1121 | static int __devinitdata sis_96x_compatible = 0; | |
1122 | ||
1123 | #define SIS_DETECT_REGISTER 0x40 | |
1124 | ||
1125 | static void __init quirk_sis_503(struct pci_dev *dev) | |
1126 | { | |
1127 | u8 reg; | |
1128 | u16 devid; | |
1129 | ||
1130 | pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®); | |
1131 | pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6)); | |
1132 | pci_read_config_word(dev, PCI_DEVICE_ID, &devid); | |
1133 | if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) { | |
1134 | pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg); | |
1135 | return; | |
1136 | } | |
1137 | ||
1138 | /* Make people aware that we changed the config.. */ | |
1139 | printk(KERN_WARNING "Uncovering SIS%x that hid as a SIS503 (compatible=%d)\n", devid, sis_96x_compatible); | |
1140 | ||
1141 | /* | |
1142 | * Ok, it now shows up as a 96x.. The 96x quirks are after | |
1143 | * the 503 quirk in the quirk table, so they'll automatically | |
1144 | * run and enable things like the SMBus device | |
1145 | */ | |
1146 | dev->device = devid; | |
1147 | } | |
1148 | ||
1149 | static void __init quirk_sis_96x_compatible(struct pci_dev *dev) | |
1150 | { | |
1151 | sis_96x_compatible = 1; | |
1152 | } | |
1153 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_645, quirk_sis_96x_compatible ); | |
1154 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_646, quirk_sis_96x_compatible ); | |
1155 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_648, quirk_sis_96x_compatible ); | |
1156 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_650, quirk_sis_96x_compatible ); | |
1157 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_651, quirk_sis_96x_compatible ); | |
1158 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_735, quirk_sis_96x_compatible ); | |
1159 | ||
1160 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 ); | |
e5548e96 BJD |
1161 | /* |
1162 | * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller | |
1163 | * and MC97 modem controller are disabled when a second PCI soundcard is | |
1164 | * present. This patch, tweaking the VT8237 ISA bridge, enables them. | |
1165 | * -- bjd | |
1166 | */ | |
1167 | static void __init asus_hides_ac97_lpc(struct pci_dev *dev) | |
1168 | { | |
1169 | u8 val; | |
1170 | int asus_hides_ac97 = 0; | |
1171 | ||
1172 | if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { | |
1173 | if (dev->device == PCI_DEVICE_ID_VIA_8237) | |
1174 | asus_hides_ac97 = 1; | |
1175 | } | |
1176 | ||
1177 | if (!asus_hides_ac97) | |
1178 | return; | |
1179 | ||
1180 | pci_read_config_byte(dev, 0x50, &val); | |
1181 | if (val & 0xc0) { | |
1182 | pci_write_config_byte(dev, 0x50, val & (~0xc0)); | |
1183 | pci_read_config_byte(dev, 0x50, &val); | |
1184 | if (val & 0xc0) | |
1185 | printk(KERN_INFO "PCI: onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", val); | |
1186 | else | |
1187 | printk(KERN_INFO "PCI: enabled onboard AC97/MC97 devices\n"); | |
1188 | } | |
1189 | } | |
1190 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc ); | |
1191 | ||
1da177e4 LT |
1192 | |
1193 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus ); | |
1194 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus ); | |
1195 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus ); | |
1196 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus ); | |
1197 | ||
77967052 | 1198 | #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) |
15e0c694 AC |
1199 | |
1200 | /* | |
1201 | * If we are using libata we can drive this chip properly but must | |
1202 | * do this early on to make the additional device appear during | |
1203 | * the PCI scanning. | |
1204 | */ | |
1205 | ||
1206 | static void __devinit quirk_jmicron_dualfn(struct pci_dev *pdev) | |
1207 | { | |
1208 | u32 conf; | |
1209 | u8 hdr; | |
1210 | ||
1211 | /* Only poke fn 0 */ | |
1212 | if (PCI_FUNC(pdev->devfn)) | |
1213 | return; | |
1214 | ||
1215 | switch(pdev->device) { | |
1216 | case PCI_DEVICE_ID_JMICRON_JMB365: | |
1217 | case PCI_DEVICE_ID_JMICRON_JMB366: | |
1218 | /* Redirect IDE second PATA port to the right spot */ | |
1219 | pci_read_config_dword(pdev, 0x80, &conf); | |
1220 | conf |= (1 << 24); | |
1221 | /* Fall through */ | |
1222 | pci_write_config_dword(pdev, 0x80, conf); | |
1223 | case PCI_DEVICE_ID_JMICRON_JMB361: | |
1224 | case PCI_DEVICE_ID_JMICRON_JMB363: | |
1225 | pci_read_config_dword(pdev, 0x40, &conf); | |
1226 | /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ | |
1227 | /* Set the class codes correctly and then direct IDE 0 */ | |
1228 | conf &= ~0x000F0200; /* Clear bit 9 and 16-19 */ | |
1229 | conf |= 0x00C20002; /* Set bit 1, 17, 22, 23 */ | |
1230 | pci_write_config_dword(pdev, 0x40, conf); | |
1231 | ||
1232 | /* Reconfigure so that the PCI scanner discovers the | |
1233 | device is now multifunction */ | |
1234 | ||
1235 | pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr); | |
1236 | pdev->hdr_type = hdr & 0x7f; | |
1237 | pdev->multifunction = !!(hdr & 0x80); | |
1238 | ||
1239 | break; | |
1240 | } | |
1241 | } | |
1242 | ||
1243 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn); | |
1244 | ||
1245 | #endif | |
1246 | ||
1da177e4 LT |
1247 | #ifdef CONFIG_X86_IO_APIC |
1248 | static void __init quirk_alder_ioapic(struct pci_dev *pdev) | |
1249 | { | |
1250 | int i; | |
1251 | ||
1252 | if ((pdev->class >> 8) != 0xff00) | |
1253 | return; | |
1254 | ||
1255 | /* the first BAR is the location of the IO APIC...we must | |
1256 | * not touch this (and it's already covered by the fixmap), so | |
1257 | * forcibly insert it into the resource tree */ | |
1258 | if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0)) | |
1259 | insert_resource(&iomem_resource, &pdev->resource[0]); | |
1260 | ||
1261 | /* The next five BARs all seem to be rubbish, so just clean | |
1262 | * them out */ | |
1263 | for (i=1; i < 6; i++) { | |
1264 | memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); | |
1265 | } | |
1266 | ||
1267 | } | |
1268 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic ); | |
1269 | #endif | |
1270 | ||
2bd0fa3b JB |
1271 | enum ide_combined_type { COMBINED = 0, IDE = 1, LIBATA = 2 }; |
1272 | /* Defaults to combined */ | |
1273 | static enum ide_combined_type combined_mode; | |
1274 | ||
1275 | static int __init combined_setup(char *str) | |
1276 | { | |
1277 | if (!strncmp(str, "ide", 3)) | |
1278 | combined_mode = IDE; | |
1279 | else if (!strncmp(str, "libata", 6)) | |
1280 | combined_mode = LIBATA; | |
1281 | else /* "combined" or anything else defaults to old behavior */ | |
1282 | combined_mode = COMBINED; | |
1283 | ||
1284 | return 1; | |
1285 | } | |
1286 | __setup("combined_mode=", combined_setup); | |
1287 | ||
77967052 | 1288 | #ifdef CONFIG_SATA_INTEL_COMBINED |
1da177e4 LT |
1289 | static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev) |
1290 | { | |
1291 | u8 prog, comb, tmp; | |
1292 | int ich = 0; | |
1293 | ||
1294 | /* | |
1295 | * Narrow down to Intel SATA PCI devices. | |
1296 | */ | |
1297 | switch (pdev->device) { | |
1298 | /* PCI ids taken from drivers/scsi/ata_piix.c */ | |
1299 | case 0x24d1: | |
1300 | case 0x24df: | |
1301 | case 0x25a3: | |
1302 | case 0x25b0: | |
1303 | ich = 5; | |
1304 | break; | |
1305 | case 0x2651: | |
1306 | case 0x2652: | |
1307 | case 0x2653: | |
c368ca4e | 1308 | case 0x2680: /* ESB2 */ |
1da177e4 LT |
1309 | ich = 6; |
1310 | break; | |
1311 | case 0x27c0: | |
1312 | case 0x27c4: | |
1313 | ich = 7; | |
1314 | break; | |
012b265f JG |
1315 | case 0x2828: /* ICH8M */ |
1316 | ich = 8; | |
1317 | break; | |
1da177e4 LT |
1318 | default: |
1319 | /* we do not handle this PCI device */ | |
1320 | return; | |
1321 | } | |
1322 | ||
1323 | /* | |
1324 | * Read combined mode register. | |
1325 | */ | |
1326 | pci_read_config_byte(pdev, 0x90, &tmp); /* combined mode reg */ | |
1327 | ||
1328 | if (ich == 5) { | |
1329 | tmp &= 0x6; /* interesting bits 2:1, PATA primary/secondary */ | |
1330 | if (tmp == 0x4) /* bits 10x */ | |
1331 | comb = (1 << 0); /* SATA port 0, PATA port 1 */ | |
1332 | else if (tmp == 0x6) /* bits 11x */ | |
1333 | comb = (1 << 2); /* PATA port 0, SATA port 1 */ | |
1334 | else | |
1335 | return; /* not in combined mode */ | |
1336 | } else { | |
012b265f | 1337 | WARN_ON((ich != 6) && (ich != 7) && (ich != 8)); |
1da177e4 LT |
1338 | tmp &= 0x3; /* interesting bits 1:0 */ |
1339 | if (tmp & (1 << 0)) | |
1340 | comb = (1 << 2); /* PATA port 0, SATA port 1 */ | |
1341 | else if (tmp & (1 << 1)) | |
1342 | comb = (1 << 0); /* SATA port 0, PATA port 1 */ | |
1343 | else | |
1344 | return; /* not in combined mode */ | |
1345 | } | |
1346 | ||
1347 | /* | |
1348 | * Read programming interface register. | |
1349 | * (Tells us if it's legacy or native mode) | |
1350 | */ | |
1351 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); | |
1352 | ||
1353 | /* if SATA port is in native mode, we're ok. */ | |
1354 | if (prog & comb) | |
1355 | return; | |
1356 | ||
2bd0fa3b JB |
1357 | /* Don't reserve any so the IDE driver can get them (but only if |
1358 | * combined_mode=ide). | |
1359 | */ | |
1360 | if (combined_mode == IDE) | |
1361 | return; | |
1362 | ||
1363 | /* Grab them both for libata if combined_mode=libata. */ | |
1364 | if (combined_mode == LIBATA) { | |
1365 | request_region(0x1f0, 8, "libata"); /* port 0 */ | |
1366 | request_region(0x170, 8, "libata"); /* port 1 */ | |
1367 | return; | |
1368 | } | |
1369 | ||
1da177e4 LT |
1370 | /* SATA port is in legacy mode. Reserve port so that |
1371 | * IDE driver does not attempt to use it. If request_region | |
1372 | * fails, it will be obvious at boot time, so we don't bother | |
1373 | * checking return values. | |
1374 | */ | |
1375 | if (comb == (1 << 0)) | |
1376 | request_region(0x1f0, 8, "libata"); /* port 0 */ | |
1377 | else | |
1378 | request_region(0x170, 8, "libata"); /* port 1 */ | |
1379 | } | |
1380 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_intel_ide_combined ); | |
77967052 | 1381 | #endif /* CONFIG_SATA_INTEL_COMBINED */ |
1da177e4 LT |
1382 | |
1383 | ||
1384 | int pcie_mch_quirk; | |
1385 | ||
1386 | static void __devinit quirk_pcie_mch(struct pci_dev *pdev) | |
1387 | { | |
1388 | pcie_mch_quirk = 1; | |
1389 | } | |
1390 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch ); | |
1391 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch ); | |
1392 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch ); | |
1393 | ||
4602b88d KA |
1394 | |
1395 | /* | |
1396 | * It's possible for the MSI to get corrupted if shpc and acpi | |
1397 | * are used together on certain PXH-based systems. | |
1398 | */ | |
1399 | static void __devinit quirk_pcie_pxh(struct pci_dev *dev) | |
1400 | { | |
1401 | disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), | |
1402 | PCI_CAP_ID_MSI); | |
1403 | dev->no_msi = 1; | |
1404 | ||
1405 | printk(KERN_WARNING "PCI: PXH quirk detected, " | |
1406 | "disabling MSI for SHPC device\n"); | |
1407 | } | |
1408 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh); | |
1409 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh); | |
1410 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh); | |
1411 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); | |
1412 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); | |
1413 | ||
ffadcc2f KCA |
1414 | /* |
1415 | * Some Intel PCI Express chipsets have trouble with downstream | |
1416 | * device power management. | |
1417 | */ | |
1418 | static void quirk_intel_pcie_pm(struct pci_dev * dev) | |
1419 | { | |
1420 | pci_pm_d3_delay = 120; | |
1421 | dev->no_d1d2 = 1; | |
1422 | } | |
1423 | ||
1424 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); | |
1425 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); | |
1426 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); | |
1427 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm); | |
1428 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm); | |
1429 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm); | |
1430 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm); | |
1431 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm); | |
1432 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm); | |
1433 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm); | |
1434 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm); | |
1435 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm); | |
1436 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm); | |
1437 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm); | |
1438 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm); | |
1439 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm); | |
1440 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm); | |
1441 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm); | |
1442 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); | |
1443 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); | |
1444 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); | |
4602b88d | 1445 | |
c408a379 KA |
1446 | /* |
1447 | * Fixup the cardbus bridges on the IBM Dock II docking station | |
1448 | */ | |
1449 | static void __devinit quirk_ibm_dock2_cardbus(struct pci_dev *dev) | |
1450 | { | |
1451 | u32 val; | |
1452 | ||
1453 | /* | |
1454 | * tie the 2 interrupt pins to INTA, and configure the | |
1455 | * multifunction routing register to handle this. | |
1456 | */ | |
1457 | if ((dev->subsystem_vendor == PCI_VENDOR_ID_IBM) && | |
1458 | (dev->subsystem_device == 0x0148)) { | |
1459 | printk(KERN_INFO "PCI: Found IBM Dock II Cardbus Bridge " | |
1460 | "applying quirk\n"); | |
1461 | pci_read_config_dword(dev, 0x8c, &val); | |
1462 | val = ((val & 0xffffff00) | 0x1002); | |
1463 | pci_write_config_dword(dev, 0x8c, val); | |
1464 | pci_read_config_dword(dev, 0x80, &val); | |
1465 | val = ((val & 0x00ffff00) | 0x2864c077); | |
1466 | pci_write_config_dword(dev, 0x80, val); | |
1467 | } | |
1468 | } | |
1469 | ||
1470 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420, | |
1471 | quirk_ibm_dock2_cardbus); | |
1472 | ||
1da177e4 LT |
1473 | static void __devinit quirk_netmos(struct pci_dev *dev) |
1474 | { | |
1475 | unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; | |
1476 | unsigned int num_serial = dev->subsystem_device & 0xf; | |
1477 | ||
1478 | /* | |
1479 | * These Netmos parts are multiport serial devices with optional | |
1480 | * parallel ports. Even when parallel ports are present, they | |
1481 | * are identified as class SERIAL, which means the serial driver | |
1482 | * will claim them. To prevent this, mark them as class OTHER. | |
1483 | * These combo devices should be claimed by parport_serial. | |
1484 | * | |
1485 | * The subdevice ID is of the form 0x00PS, where <P> is the number | |
1486 | * of parallel ports and <S> is the number of serial ports. | |
1487 | */ | |
1488 | switch (dev->device) { | |
1489 | case PCI_DEVICE_ID_NETMOS_9735: | |
1490 | case PCI_DEVICE_ID_NETMOS_9745: | |
1491 | case PCI_DEVICE_ID_NETMOS_9835: | |
1492 | case PCI_DEVICE_ID_NETMOS_9845: | |
1493 | case PCI_DEVICE_ID_NETMOS_9855: | |
1494 | if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_SERIAL && | |
1495 | num_parallel) { | |
1496 | printk(KERN_INFO "PCI: Netmos %04x (%u parallel, " | |
1497 | "%u serial); changing class SERIAL to OTHER " | |
1498 | "(use parport_serial)\n", | |
1499 | dev->device, num_parallel, num_serial); | |
1500 | dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | | |
1501 | (dev->class & 0xff); | |
1502 | } | |
1503 | } | |
1504 | } | |
1505 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos); | |
1506 | ||
16a74744 BH |
1507 | static void __devinit quirk_e100_interrupt(struct pci_dev *dev) |
1508 | { | |
1509 | u16 command; | |
1510 | u32 bar; | |
1511 | u8 __iomem *csr; | |
1512 | u8 cmd_hi; | |
1513 | ||
1514 | switch (dev->device) { | |
1515 | /* PCI IDs taken from drivers/net/e100.c */ | |
1516 | case 0x1029: | |
1517 | case 0x1030 ... 0x1034: | |
1518 | case 0x1038 ... 0x103E: | |
1519 | case 0x1050 ... 0x1057: | |
1520 | case 0x1059: | |
1521 | case 0x1064 ... 0x106B: | |
1522 | case 0x1091 ... 0x1095: | |
1523 | case 0x1209: | |
1524 | case 0x1229: | |
1525 | case 0x2449: | |
1526 | case 0x2459: | |
1527 | case 0x245D: | |
1528 | case 0x27DC: | |
1529 | break; | |
1530 | default: | |
1531 | return; | |
1532 | } | |
1533 | ||
1534 | /* | |
1535 | * Some firmware hands off the e100 with interrupts enabled, | |
1536 | * which can cause a flood of interrupts if packets are | |
1537 | * received before the driver attaches to the device. So | |
1538 | * disable all e100 interrupts here. The driver will | |
1539 | * re-enable them when it's ready. | |
1540 | */ | |
1541 | pci_read_config_word(dev, PCI_COMMAND, &command); | |
1542 | pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar); | |
1543 | ||
1544 | if (!(command & PCI_COMMAND_MEMORY) || !bar) | |
1545 | return; | |
1546 | ||
1547 | csr = ioremap(bar, 8); | |
1548 | if (!csr) { | |
1549 | printk(KERN_WARNING "PCI: Can't map %s e100 registers\n", | |
1550 | pci_name(dev)); | |
1551 | return; | |
1552 | } | |
1553 | ||
1554 | cmd_hi = readb(csr + 3); | |
1555 | if (cmd_hi == 0) { | |
1556 | printk(KERN_WARNING "PCI: Firmware left %s e100 interrupts " | |
1557 | "enabled, disabling\n", pci_name(dev)); | |
1558 | writeb(1, csr + 3); | |
1559 | } | |
1560 | ||
1561 | iounmap(csr); | |
1562 | } | |
1563 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt); | |
a5312e28 IK |
1564 | |
1565 | static void __devinit fixup_rev1_53c810(struct pci_dev* dev) | |
1566 | { | |
1567 | /* rev 1 ncr53c810 chips don't set the class at all which means | |
1568 | * they don't get their resources remapped. Fix that here. | |
1569 | */ | |
1570 | ||
1571 | if (dev->class == PCI_CLASS_NOT_DEFINED) { | |
1572 | printk(KERN_INFO "NCR 53c810 rev 1 detected, setting PCI class.\n"); | |
1573 | dev->class = PCI_CLASS_STORAGE_SCSI; | |
1574 | } | |
1575 | } | |
1576 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); | |
1577 | ||
1578 | ||
1da177e4 LT |
1579 | static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) |
1580 | { | |
1581 | while (f < end) { | |
1582 | if ((f->vendor == dev->vendor || f->vendor == (u16) PCI_ANY_ID) && | |
1583 | (f->device == dev->device || f->device == (u16) PCI_ANY_ID)) { | |
1584 | pr_debug("PCI: Calling quirk %p for %s\n", f->hook, pci_name(dev)); | |
1585 | f->hook(dev); | |
1586 | } | |
1587 | f++; | |
1588 | } | |
1589 | } | |
1590 | ||
1591 | extern struct pci_fixup __start_pci_fixups_early[]; | |
1592 | extern struct pci_fixup __end_pci_fixups_early[]; | |
1593 | extern struct pci_fixup __start_pci_fixups_header[]; | |
1594 | extern struct pci_fixup __end_pci_fixups_header[]; | |
1595 | extern struct pci_fixup __start_pci_fixups_final[]; | |
1596 | extern struct pci_fixup __end_pci_fixups_final[]; | |
1597 | extern struct pci_fixup __start_pci_fixups_enable[]; | |
1598 | extern struct pci_fixup __end_pci_fixups_enable[]; | |
1599 | ||
1600 | ||
1601 | void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) | |
1602 | { | |
1603 | struct pci_fixup *start, *end; | |
1604 | ||
1605 | switch(pass) { | |
1606 | case pci_fixup_early: | |
1607 | start = __start_pci_fixups_early; | |
1608 | end = __end_pci_fixups_early; | |
1609 | break; | |
1610 | ||
1611 | case pci_fixup_header: | |
1612 | start = __start_pci_fixups_header; | |
1613 | end = __end_pci_fixups_header; | |
1614 | break; | |
1615 | ||
1616 | case pci_fixup_final: | |
1617 | start = __start_pci_fixups_final; | |
1618 | end = __end_pci_fixups_final; | |
1619 | break; | |
1620 | ||
1621 | case pci_fixup_enable: | |
1622 | start = __start_pci_fixups_enable; | |
1623 | end = __end_pci_fixups_enable; | |
1624 | break; | |
1625 | ||
1626 | default: | |
1627 | /* stupid compiler warning, you would think with an enum... */ | |
1628 | return; | |
1629 | } | |
1630 | pci_do_fixups(dev, start, end); | |
1631 | } | |
1632 | ||
9d265124 DY |
1633 | /* Enable 1k I/O space granularity on the Intel P64H2 */ |
1634 | static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev) | |
1635 | { | |
1636 | u16 en1k; | |
1637 | u8 io_base_lo, io_limit_lo; | |
1638 | unsigned long base, limit; | |
1639 | struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES; | |
1640 | ||
1641 | pci_read_config_word(dev, 0x40, &en1k); | |
1642 | ||
1643 | if (en1k & 0x200) { | |
1644 | printk(KERN_INFO "PCI: Enable I/O Space to 1 KB Granularity\n"); | |
1645 | ||
1646 | pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo); | |
1647 | pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo); | |
1648 | base = (io_base_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8; | |
1649 | limit = (io_limit_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8; | |
1650 | ||
1651 | if (base <= limit) { | |
1652 | res->start = base; | |
1653 | res->end = limit + 0x3ff; | |
1654 | } | |
1655 | } | |
1656 | } | |
1657 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); | |
1658 | ||
cf34a8e0 BG |
1659 | /* Under some circumstances, AER is not linked with extended capabilities. |
1660 | * Force it to be linked by setting the corresponding control bit in the | |
1661 | * config space. | |
1662 | */ | |
1663 | static void __devinit quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) | |
1664 | { | |
1665 | uint8_t b; | |
1666 | if (pci_read_config_byte(dev, 0xf41, &b) == 0) { | |
1667 | if (!(b & 0x20)) { | |
1668 | pci_write_config_byte(dev, 0xf41, b | 0x20); | |
1669 | printk(KERN_INFO | |
1670 | "PCI: Linking AER extended capability on %s\n", | |
1671 | pci_name(dev)); | |
1672 | } | |
1673 | } | |
1674 | } | |
1675 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, | |
1676 | quirk_nvidia_ck804_pcie_aer_ext_cap); | |
1677 | ||
3f79e107 BG |
1678 | #ifdef CONFIG_PCI_MSI |
1679 | /* To disable MSI globally */ | |
1680 | int pci_msi_quirk; | |
1681 | ||
1682 | /* The Serverworks PCI-X chipset does not support MSI. We cannot easily rely | |
1683 | * on setting PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually | |
1684 | * some other busses controlled by the chipset even if Linux is not aware of it. | |
1685 | * Instead of setting the flag on all busses in the machine, simply disable MSI | |
1686 | * globally. | |
1687 | */ | |
1688 | static void __init quirk_svw_msi(struct pci_dev *dev) | |
1689 | { | |
1690 | pci_msi_quirk = 1; | |
1691 | printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n"); | |
1692 | } | |
1693 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi); | |
1694 | ||
1695 | /* Disable MSI on chipsets that are known to not support it */ | |
1696 | static void __devinit quirk_disable_msi(struct pci_dev *dev) | |
1697 | { | |
1698 | if (dev->subordinate) { | |
1699 | printk(KERN_WARNING "PCI: MSI quirk detected. " | |
1700 | "PCI_BUS_FLAGS_NO_MSI set for %s subordinate bus.\n", | |
1701 | pci_name(dev)); | |
1702 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; | |
1703 | } | |
1704 | } | |
1705 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); | |
6397c75c BG |
1706 | |
1707 | /* Go through the list of Hypertransport capabilities and | |
1708 | * return 1 if a HT MSI capability is found and enabled */ | |
1709 | static int __devinit msi_ht_cap_enabled(struct pci_dev *dev) | |
1710 | { | |
1711 | u8 pos; | |
1712 | int ttl; | |
1713 | for (pos = pci_find_capability(dev, PCI_CAP_ID_HT), ttl = 48; | |
1714 | pos && ttl; | |
1715 | pos = pci_find_next_capability(dev, pos, PCI_CAP_ID_HT), ttl--) { | |
1716 | u32 cap_hdr; | |
1717 | /* MSI mapping section according to Hypertransport spec */ | |
1718 | if (pci_read_config_dword(dev, pos, &cap_hdr) == 0 | |
1719 | && (cap_hdr & 0xf8000000) == 0xa8000000 /* MSI mapping */) { | |
1720 | printk(KERN_INFO "PCI: Found HT MSI mapping on %s with capability %s\n", | |
1721 | pci_name(dev), cap_hdr & 0x10000 ? "enabled" : "disabled"); | |
1722 | return (cap_hdr & 0x10000) != 0; /* MSI mapping cap enabled */ | |
1723 | } | |
1724 | } | |
1725 | return 0; | |
1726 | } | |
1727 | ||
1728 | /* Check the hypertransport MSI mapping to know whether MSI is enabled or not */ | |
1729 | static void __devinit quirk_msi_ht_cap(struct pci_dev *dev) | |
1730 | { | |
1731 | if (dev->subordinate && !msi_ht_cap_enabled(dev)) { | |
1732 | printk(KERN_WARNING "PCI: MSI quirk detected. " | |
1733 | "MSI disabled on chipset %s.\n", | |
1734 | pci_name(dev)); | |
1735 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; | |
1736 | } | |
1737 | } | |
1738 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, | |
1739 | quirk_msi_ht_cap); | |
1740 | ||
1741 | /* The nVidia CK804 chipset may have 2 HT MSI mappings. | |
1742 | * MSI are supported if the MSI capability set in any of these mappings. | |
1743 | */ | |
1744 | static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) | |
1745 | { | |
1746 | struct pci_dev *pdev; | |
1747 | ||
1748 | if (!dev->subordinate) | |
1749 | return; | |
1750 | ||
1751 | /* check HT MSI cap on this chipset and the root one. | |
1752 | * a single one having MSI is enough to be sure that MSI are supported. | |
1753 | */ | |
1754 | pdev = pci_find_slot(dev->bus->number, 0); | |
1755 | if (dev->subordinate && !msi_ht_cap_enabled(dev) | |
1756 | && !msi_ht_cap_enabled(pdev)) { | |
1757 | printk(KERN_WARNING "PCI: MSI quirk detected. " | |
1758 | "MSI disabled on chipset %s.\n", | |
1759 | pci_name(dev)); | |
1760 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; | |
1761 | } | |
1762 | } | |
1763 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, | |
1764 | quirk_nvidia_ck804_msi_ht_cap); | |
3f79e107 BG |
1765 | #endif /* CONFIG_PCI_MSI */ |
1766 | ||
1da177e4 LT |
1767 | EXPORT_SYMBOL(pcie_mch_quirk); |
1768 | #ifdef CONFIG_HOTPLUG | |
1769 | EXPORT_SYMBOL(pci_fixup_device); | |
1770 | #endif |