Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
[deliverable/linux.git] / drivers / pcmcia / Kconfig
CommitLineData
1da177e4 1#
bf45d9b0 2# PCCARD (PCMCIA/CardBus) bus subsystem configuration
1da177e4
LT
3#
4
42c5323c 5menuconfig PCCARD
1da177e4 6 tristate "PCCard (PCMCIA/CardBus) support"
1da177e4
LT
7 ---help---
8 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
9 computer. These are credit-card size devices such as network cards,
10 modems or hard drives often used with laptops computers. There are
9a5555b8
DB
11 actually two varieties of these cards: 16 bit PCMCIA and 32 bit
12 CardBus cards.
1da177e4
LT
13
14 To compile this driver as modules, choose M here: the
15 module will be called pcmcia_core.
16
17if PCCARD
18
1da177e4
LT
19config PCMCIA
20 tristate "16-bit PCMCIA support"
f861bd23 21 select CRC32
1da177e4
LT
22 default y
23 ---help---
24 This option enables support for 16-bit PCMCIA cards. Most older
25 PC-cards are such 16-bit PCMCIA cards, so unless you know you're
26 only using 32-bit CardBus cards, say Y or M here.
27
9a5555b8
DB
28 To use 16-bit PCMCIA cards, you will need supporting software in
29 most cases. (see the file <file:Documentation/Changes> for
30 location and details).
1da177e4
LT
31
32 To compile this driver as modules, choose M here: the
33 module will be called pcmcia.
34
35 If unsure, say Y.
36
daa9517d 37config PCMCIA_LOAD_CIS
204911fb
KC
38 bool "Load CIS updates from userspace"
39 depends on PCMCIA
daa9517d
DB
40 select FW_LOADER
41 default y
42 help
43 Some PCMCIA cards require an updated Card Information Structure (CIS)
44 to be loaded from userspace to work correctly. If you say Y here,
45 and your userspace is arranged correctly, this will be loaded
46 automatically using the in-kernel firmware loader and the hotplug
47 subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
48
49 If unsure, say Y.
50
1da177e4 51config CARDBUS
9fea84f4 52 bool "32-bit CardBus support"
1da177e4
LT
53 depends on PCI
54 default y
55 ---help---
56 CardBus is a bus mastering architecture for PC-cards, which allows
57 for 32 bit PC-cards (the original PCMCIA standard specifies only
58 a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
59
60 To use 32 bit PC-cards, you also need a CardBus compatible host
61 bridge. Virtually all modern PCMCIA bridges do this, and most of
62 them are "yenta-compatible", so say Y or M there, too.
63
64 If unsure, say Y.
65
66comment "PC-card bridges"
67
68config YENTA
69 tristate "CardBus yenta-compatible bridge support"
89b39f5d 70 depends on PCI
6a108a14 71 select CARDBUS if !EXPERT
9d9c98e8 72 select PCCARD_NONSTATIC if PCMCIA != n
1da177e4
LT
73 ---help---
74 This option enables support for CardBus host bridges. Virtually
9fea84f4
DB
75 all modern PCMCIA bridges are CardBus compatible. A "bridge" is
76 the hardware inside your computer that PCMCIA cards are plugged
1da177e4
LT
77 into.
78
79 To compile this driver as modules, choose M here: the
80 module will be called yenta_socket.
81
82 If unsure, say Y.
83
63e7ebd0
DR
84config YENTA_O2
85 default y
6a108a14 86 bool "Special initialization for O2Micro bridges" if EXPERT
63e7ebd0
DR
87 depends on YENTA
88
89config YENTA_RICOH
90 default y
6a108a14 91 bool "Special initialization for Ricoh bridges" if EXPERT
63e7ebd0
DR
92 depends on YENTA
93
94config YENTA_TI
95 default y
6a108a14 96 bool "Special initialization for TI and EnE bridges" if EXPERT
63e7ebd0
DR
97 depends on YENTA
98
99config YENTA_ENE_TUNE
100 default y
6a108a14 101 bool "Auto-tune EnE bridges for CB cards" if EXPERT
63e7ebd0
DR
102 depends on YENTA_TI && CARDBUS
103
104config YENTA_TOSHIBA
105 default y
6a108a14 106 bool "Special initialization for Toshiba ToPIC bridges" if EXPERT
63e7ebd0
DR
107 depends on YENTA
108
1da177e4
LT
109config PD6729
110 tristate "Cirrus PD6729 compatible bridge support"
111 depends on PCMCIA && PCI
112 select PCCARD_NONSTATIC
113 help
114 This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
115 device, found in some older laptops and PCMCIA card readers.
116
117config I82092
118 tristate "i82092 compatible bridge support"
119 depends on PCMCIA && PCI
120 select PCCARD_NONSTATIC
121 help
122 This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
123 found in some older laptops and more commonly in evaluation boards for the
124 chip.
125
126config I82365
127 tristate "i82365 compatible bridge support"
128 depends on PCMCIA && ISA
129 select PCCARD_NONSTATIC
130 help
131 Say Y here to include support for ISA-bus PCMCIA host bridges that
132 are register compatible with the Intel i82365. These are found on
133 older laptops and ISA-bus card readers for desktop systems. A
134 "bridge" is the hardware inside your computer that PCMCIA cards are
135 plugged into. If unsure, say N.
136
137config TCIC
138 tristate "Databook TCIC host bridge support"
81000808 139 depends on PCMCIA && ISA
1da177e4
LT
140 select PCCARD_NONSTATIC
141 help
142 Say Y here to include support for the Databook TCIC family of PCMCIA
143 host bridges. These are only found on a handful of old systems.
144 "Bridge" is the name used for the hardware inside your computer that
145 PCMCIA cards are plugged into. If unsure, say N.
146
de957c89 147config PCMCIA_M8XX
80128ff7 148 tristate "MPC8xx PCMCIA support"
9d9c98e8
MM
149 depends on PCCARD && PPC && 8xx
150 select PCCARD_IODYN if PCMCIA != n
80128ff7
VB
151 help
152 Say Y here to include support for PowerPC 8xx series PCMCIA
153 controller.
154
155 This driver is also available as a module called m8xx_pcmcia.
de957c89 156
66213b3c
ML
157config PCMCIA_ALCHEMY_DEVBOARD
158 tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
42a4f17d 159 depends on MIPS_ALCHEMY && PCMCIA
66213b3c
ML
160 select 64BIT_PHYS_ADDR
161 help
162 Enable this driver of you want PCMCIA support on your Alchemy
64cd04d0
ML
163 Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300
164 board. NOT suitable for the PB1000!
66213b3c
ML
165
166 This driver is also available as a module called db1xxx_ss.ko
167
0273b4ef
ML
168config PCMCIA_XXS1500
169 tristate "MyCable XXS1500 PCMCIA socket support"
170 depends on PCMCIA && MIPS_XXS1500
171 select 64BIT_PHYS_ADDR
172 help
173 Support for the PCMCIA/CF socket interface on MyCable XXS1500
174 systems.
175
176 This driver is also available as a module called xxs1500_ss.ko
177
553d6d5f
MB
178config PCMCIA_BCM63XX
179 tristate "bcm63xx pcmcia support"
180 depends on BCM63XX && PCMCIA
181
0f767de6 182config PCMCIA_SOC_COMMON
1bf8e621 183 tristate
0f767de6 184
136b758b
RK
185config PCMCIA_SA11XX_BASE
186 tristate
187
1da177e4
LT
188config PCMCIA_SA1100
189 tristate "SA1100 support"
190 depends on ARM && ARCH_SA1100 && PCMCIA
0f767de6 191 select PCMCIA_SOC_COMMON
136b758b 192 select PCMCIA_SA11XX_BASE
1da177e4
LT
193 help
194 Say Y here to include support for SA11x0-based PCMCIA or CF
195 sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
196 Xscale(R) embedded machines.
197
198 This driver is also available as a module called sa1100_cs.
199
200config PCMCIA_SA1111
201 tristate "SA1111 support"
11990b2b 202 depends on ARM && SA1111 && PCMCIA
0f767de6 203 select PCMCIA_SOC_COMMON
11990b2b 204 select PCMCIA_SA11XX_BASE if ARCH_SA1100
1da177e4
LT
205 help
206 Say Y here to include support for SA1111-based PCMCIA or CF
207 sockets, found on the Jornada 720, Graphicsmaster and other
208 StrongARM(R)/Xscale(R) embedded machines.
209
210 This driver is also available as a module called sa1111_cs.
211
212config PCMCIA_PXA2XX
213 tristate "PXA2xx support"
214 depends on ARM && ARCH_PXA && PCMCIA
35978408 215 depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
cc513ac0 216 || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
addff0fa 217 || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
fd62999b 218 || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
95244306 219 || MACH_COLIBRI320 || MACH_H4700)
11990b2b 220 select PCMCIA_SA1111 if ARCH_LUBBOCK && SA1111
0f767de6 221 select PCMCIA_SOC_COMMON
1da177e4
LT
222 help
223 Say Y here to include support for the PXA2xx PCMCIA controller
224
c9f50ddd
DB
225config PCMCIA_DEBUG
226 bool "Enable debugging"
227 depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
228 help
229 Say Y here to enable debugging for the SoC PCMCIA layer.
230 You will need to choose the debugging level either via the
231 kernel command line, or module options depending whether
232 you build the drivers as modules.
233
234 The kernel command line options are:
235 sa11xx_core.pc_debug=N
236 pxa2xx_core.pc_debug=N
237
238 The module option is called pc_debug=N
239
240 In all the above examples, N is the debugging verbosity
241 level.
242
1da177e4
LT
243config PCMCIA_PROBE
244 bool
ea6add0b 245 default y if ISA && !ARCH_SA1100 && !PARISC
1da177e4
LT
246
247config M32R_PCC
248 bool "M32R PCMCIA I/F"
249 depends on M32R && CHIP_M32700 && PCMCIA
250 help
251 Say Y here to use the M32R PCMCIA controller.
252
253config M32R_CFC
254 bool "M32R CF I/F Controller"
934bb7f8 255 depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
1da177e4
LT
256 help
257 Say Y here to use the M32R CompactFlash controller.
258
259config M32R_CFC_NUM
260 int "M32R CF I/F number"
261 depends on M32R_CFC
934bb7f8 262 default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
1da177e4
LT
263 help
264 Set the number of M32R CF slots.
265
266config PCMCIA_VRC4171
267 tristate "NEC VRC4171 Card Controllers support"
daaeb72b 268 depends on CPU_VR41XX && ISA && PCMCIA
1da177e4
LT
269
270config PCMCIA_VRC4173
271 tristate "NEC VRC4173 CARDU support"
272 depends on CPU_VR41XX && PCI && PCMCIA
273
f74e48a5
DB
274config OMAP_CF
275 tristate "OMAP CompactFlash Controller"
276 depends on PCMCIA && ARCH_OMAP16XX
277 help
278 Say Y here to support the CompactFlash controller on OMAP.
279 Note that this doesn't support "True IDE" mode.
280
785e821e
MH
281config BFIN_CFPCMCIA
282 tristate "Blackfin CompactFlash PCMCIA Driver"
283 depends on PCMCIA && BLACKFIN
284 help
285 Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
286
287
2c1f3b7a
AV
288config AT91_CF
289 tristate "AT91 CompactFlash Controller"
ed9084ec 290 depends on PCMCIA && ARCH_AT91
2c1f3b7a
AV
291 help
292 Say Y here to support the CompactFlash controller on AT91 chips.
293 Or choose M to compile the driver as a module named "at91_cf".
294
2b571a06
OJ
295config ELECTRA_CF
296 tristate "Electra CompactFlash Controller"
297 depends on PCMCIA && PPC_PASEMI
298 help
299 Say Y here to support the CompactFlash controller on the
300 PA Semi Electra eval board.
301
1da177e4 302config PCCARD_NONSTATIC
49b1153a 303 bool
1da177e4 304
3b27e942
DB
305config PCCARD_IODYN
306 bool
307
1da177e4 308endif # PCCARD
This page took 1.389973 seconds and 5 git commands to generate.