[deliverable/linux.git] / drivers / pcmcia / Kconfig

#
# PCCARD (PCMCIA/CardBus) bus subsystem configuration
#

menuconfig PCCARD
	tristate "PCCard (PCMCIA/CardBus) support"
	---help---
	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
	  computer.  These are credit-card size devices such as network cards,
	  modems or hard drives often used with laptops computers.  There are
	  actually two varieties of these cards: 16 bit PCMCIA and 32 bit
	  CardBus cards.

	  To compile this driver as modules, choose M here: the
	  module will be called pcmcia_core.

if PCCARD

config PCMCIA
	tristate "16-bit PCMCIA support"
	select CRC32
	default y
	---help---
	   This option enables support for 16-bit PCMCIA cards. Most older
	   PC-cards are such 16-bit PCMCIA cards, so unless you know you're
	   only using 32-bit CardBus cards, say Y or M here.

	   To use 16-bit PCMCIA cards, you will need supporting software in
	   most cases. (see the file <file:Documentation/Changes> for
	   location and details).

	   To compile this driver as modules, choose M here: the
	   module will be called pcmcia.

	   If unsure, say Y.

config PCMCIA_LOAD_CIS
	bool "Load CIS updates from userspace"
	depends on PCMCIA
	select FW_LOADER
	default y
	help
	  Some PCMCIA cards require an updated Card Information Structure (CIS)
	  to be loaded from userspace to work correctly. If you say Y here,
	  and your userspace is arranged correctly, this will be loaded
	  automatically using the in-kernel firmware loader and the hotplug
	  subsystem, instead of relying on cardmgr from pcmcia-cs to do so.

	  If unsure, say Y.

config CARDBUS
	bool "32-bit CardBus support"
	depends on PCI
	default y
	---help---
	  CardBus is a bus mastering architecture for PC-cards, which allows
	  for 32 bit PC-cards (the original PCMCIA standard specifies only
	  a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.

	  To use 32 bit PC-cards, you also need a CardBus compatible host
	  bridge. Virtually all modern PCMCIA bridges do this, and most of
	  them are "yenta-compatible", so say Y or M there, too.

	  If unsure, say Y.

comment "PC-card bridges"

config YENTA
	tristate "CardBus yenta-compatible bridge support"
	depends on PCI
	select CARDBUS if !EXPERT
	select PCCARD_NONSTATIC if PCMCIA != n && ISA
	select PCCARD_PCI if PCMCIA !=n && !ISA
	---help---
	  This option enables support for CardBus host bridges.  Virtually
	  all modern PCMCIA bridges are CardBus compatible.  A "bridge" is
	  the hardware inside your computer that PCMCIA cards are plugged
	  into.

	  To compile this driver as modules, choose M here: the
	  module will be called yenta_socket.

	  If unsure, say Y.

config YENTA_O2
	default y
	bool "Special initialization for O2Micro bridges" if EXPERT
	depends on YENTA

config YENTA_RICOH
	default y
	bool "Special initialization for Ricoh bridges" if EXPERT
	depends on YENTA

config YENTA_TI
	default y
	bool "Special initialization for TI and EnE bridges" if EXPERT
	depends on YENTA

config YENTA_ENE_TUNE
	default y
	bool "Auto-tune EnE bridges for CB cards" if EXPERT
	depends on YENTA_TI && CARDBUS

config YENTA_TOSHIBA
	default y
	bool "Special initialization for Toshiba ToPIC bridges" if EXPERT
	depends on YENTA

config PD6729
	tristate "Cirrus PD6729 compatible bridge support"
	depends on PCMCIA && PCI
	select PCCARD_NONSTATIC if PCMCIA != n && ISA
	select PCCARD_PCI if PCMCIA !=n && !ISA
	help
	  This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
	  device, found in some older laptops and PCMCIA card readers.

config I82092
	tristate "i82092 compatible bridge support"
	depends on PCMCIA && PCI
	select PCCARD_NONSTATIC if PCMCIA != n && ISA
	select PCCARD_PCI if PCMCIA !=n && !ISA
	help
	  This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
	  found in some older laptops and more commonly in evaluation boards for the
	  chip.

config I82365
	tristate "i82365 compatible bridge support"
	depends on PCMCIA && ISA
	select PCCARD_NONSTATIC
	help
	  Say Y here to include support for ISA-bus PCMCIA host bridges that
	  are register compatible with the Intel i82365.  These are found on
	  older laptops and ISA-bus card readers for desktop systems.  A
	  "bridge" is the hardware inside your computer that PCMCIA cards are
	  plugged into. If unsure, say N.

config TCIC
	tristate "Databook TCIC host bridge support"
	depends on PCMCIA && ISA
	select PCCARD_NONSTATIC
	help
	  Say Y here to include support for the Databook TCIC family of PCMCIA
	  host bridges. These are only found on a handful of old systems.
	  "Bridge" is the name used for the hardware inside your computer that
	  PCMCIA cards are plugged into. If unsure, say N.

config PCMCIA_ALCHEMY_DEVBOARD
	tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
	depends on MIPS_ALCHEMY && PCMCIA
	help
	  Enable this driver of you want PCMCIA support on your Alchemy
	  Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300
	  board.  NOT suitable for the PB1000!

	  This driver is also available as a module called db1xxx_ss.ko

config PCMCIA_XXS1500
	tristate "MyCable XXS1500 PCMCIA socket support"
	depends on PCMCIA && MIPS_XXS1500
	help
	  Support for the PCMCIA/CF socket interface on MyCable XXS1500
	  systems.

	  This driver is also available as a module called xxs1500_ss.ko

config PCMCIA_BCM63XX
	tristate "bcm63xx pcmcia support"
	depends on BCM63XX && PCMCIA

config PCMCIA_SOC_COMMON
	tristate

config PCMCIA_SA11XX_BASE
	tristate

config PCMCIA_SA1100
	tristate "SA1100 support"
	depends on ARM && ARCH_SA1100 && PCMCIA
	select PCMCIA_SOC_COMMON
	select PCMCIA_SA11XX_BASE
	help
	  Say Y here to include support for SA11x0-based PCMCIA or CF
	  sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
	  Xscale(R) embedded machines.

	  This driver is also available as a module called sa1100_cs.

config PCMCIA_SA1111
	tristate "SA1111 support"
	depends on ARM && SA1111 && PCMCIA
	select PCMCIA_SOC_COMMON
	select PCMCIA_SA11XX_BASE if ARCH_SA1100
	select PCMCIA_PXA2XX if ARCH_LUBBOCK && SA1111
	help
	  Say Y  here to include support for SA1111-based PCMCIA or CF
	  sockets, found on the Jornada 720, Graphicsmaster and other
	  StrongARM(R)/Xscale(R) embedded machines.

	  This driver is also available as a module called sa1111_cs.

config PCMCIA_PXA2XX
	tristate "PXA2xx support"
	depends on ARM && ARCH_PXA && PCMCIA
	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
		    || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
		    || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
		    || MACH_COLIBRI320 || MACH_H4700)
	select PCMCIA_SOC_COMMON
	help
	  Say Y here to include support for the PXA2xx PCMCIA controller

config PCMCIA_DEBUG
	bool "Enable debugging"
	depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
	help
	  Say Y here to enable debugging for the SoC PCMCIA layer.
	  You will need to choose the debugging level either via the
	  kernel command line, or module options depending whether
	  you build the drivers as modules.

	  The kernel command line options are:
	    sa11xx_core.pc_debug=N
	    pxa2xx_core.pc_debug=N

	  The module option is called pc_debug=N

	  In all the above examples, N is the debugging verbosity
	  level.

config PCMCIA_PROBE
	bool
	default y if ISA && !ARCH_SA1100 && !PARISC

config M32R_PCC
	bool "M32R PCMCIA I/F"
	depends on M32R && CHIP_M32700 && PCMCIA
	help
	  Say Y here to use the M32R PCMCIA controller.

config M32R_CFC
	bool "M32R CF I/F Controller"
	depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
	help
	  Say Y here to use the M32R CompactFlash controller.

config M32R_CFC_NUM
	int "M32R CF I/F number"
	depends on M32R_CFC
	default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
	help
	  Set the number of M32R CF slots.

config PCMCIA_VRC4171
	tristate "NEC VRC4171 Card Controllers support"
	depends on CPU_VR41XX && ISA && PCMCIA

config PCMCIA_VRC4173
	tristate "NEC VRC4173 CARDU support"
	depends on CPU_VR41XX && PCI && PCMCIA

config OMAP_CF
	tristate "OMAP CompactFlash Controller"
	depends on PCMCIA && ARCH_OMAP16XX
	help
	  Say Y here to support the CompactFlash controller on OMAP.
	  Note that this doesn't support "True IDE" mode.

config BFIN_CFPCMCIA
	tristate "Blackfin CompactFlash PCMCIA Driver"
	depends on PCMCIA && BLACKFIN
	help
	  Say Y here to support the CompactFlash PCMCIA driver for Blackfin.


config AT91_CF
	tristate "AT91 CompactFlash Controller"
	depends on PCMCIA && ARCH_AT91
	depends on !ARCH_MULTIPLATFORM
	help
	  Say Y here to support the CompactFlash controller on AT91 chips.
	  Or choose M to compile the driver as a module named "at91_cf".

config ELECTRA_CF
	tristate "Electra CompactFlash Controller"
	depends on PCMCIA && PPC_PASEMI
	help
	  Say Y here to support the CompactFlash controller on the
	  PA Semi Electra eval board.

config PCCARD_PCI
	bool

config PCCARD_NONSTATIC
	bool

config PCCARD_IODYN
	bool

endif	# PCCARD
Commit	Line	Data
1da177e4	1	#
bf45d9b0	2	# PCCARD (PCMCIA/CardBus) bus subsystem configuration
1da177e4 LT	3	#
1da177e4 LT	4
42c5323c	5	menuconfig PCCARD
1da177e4	6	tristate "PCCard (PCMCIA/CardBus) support"
1da177e4 LT	7	---help---
	8	Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
	9	computer. These are credit-card size devices such as network cards,
	10	modems or hard drives often used with laptops computers. There are
9a5555b8 DB	11	actually two varieties of these cards: 16 bit PCMCIA and 32 bit
9a5555b8 DB	12	CardBus cards.
1da177e4 LT	13
	14	To compile this driver as modules, choose M here: the
	15	module will be called pcmcia_core.
	16
	17	if PCCARD
	18
1da177e4 LT	19	config PCMCIA
1da177e4 LT	20	tristate "16-bit PCMCIA support"
f861bd23	21	select CRC32
1da177e4 LT	22	default y
	23	---help---
	24	This option enables support for 16-bit PCMCIA cards. Most older
	25	PC-cards are such 16-bit PCMCIA cards, so unless you know you're
	26	only using 32-bit CardBus cards, say Y or M here.
	27
9a5555b8 DB	28	To use 16-bit PCMCIA cards, you will need supporting software in
	29	most cases. (see the file <file:Documentation/Changes> for
	30	location and details).
1da177e4 LT	31
	32	To compile this driver as modules, choose M here: the
	33	module will be called pcmcia.
	34
	35	If unsure, say Y.
	36
daa9517d	37	config PCMCIA_LOAD_CIS
204911fb KC	38	bool "Load CIS updates from userspace"
204911fb KC	39	depends on PCMCIA
daa9517d DB	40	select FW_LOADER
	41	default y
	42	help
	43	Some PCMCIA cards require an updated Card Information Structure (CIS)
	44	to be loaded from userspace to work correctly. If you say Y here,
	45	and your userspace is arranged correctly, this will be loaded
	46	automatically using the in-kernel firmware loader and the hotplug
	47	subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
	48
	49	If unsure, say Y.
	50
1da177e4	51	config CARDBUS
9fea84f4	52	bool "32-bit CardBus support"
1da177e4 LT	53	depends on PCI
	54	default y
	55	---help---
	56	CardBus is a bus mastering architecture for PC-cards, which allows
	57	for 32 bit PC-cards (the original PCMCIA standard specifies only
	58	a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
	59
	60	To use 32 bit PC-cards, you also need a CardBus compatible host
	61	bridge. Virtually all modern PCMCIA bridges do this, and most of
	62	them are "yenta-compatible", so say Y or M there, too.
	63
	64	If unsure, say Y.
	65
	66	comment "PC-card bridges"
	67
	68	config YENTA
	69	tristate "CardBus yenta-compatible bridge support"
89b39f5d	70	depends on PCI
6a108a14	71	select CARDBUS if !EXPERT
02b03846 AC	72	select PCCARD_NONSTATIC if PCMCIA != n && ISA
02b03846 AC	73	select PCCARD_PCI if PCMCIA !=n && !ISA
1da177e4 LT	74	---help---
1da177e4 LT	75	This option enables support for CardBus host bridges. Virtually
9fea84f4 DB	76	all modern PCMCIA bridges are CardBus compatible. A "bridge" is
9fea84f4 DB	77	the hardware inside your computer that PCMCIA cards are plugged
1da177e4 LT	78	into.
	79
	80	To compile this driver as modules, choose M here: the
	81	module will be called yenta_socket.
	82
	83	If unsure, say Y.
	84
63e7ebd0 DR	85	config YENTA_O2
63e7ebd0 DR	86	default y
6a108a14	87	bool "Special initialization for O2Micro bridges" if EXPERT
63e7ebd0 DR	88	depends on YENTA
	89
	90	config YENTA_RICOH
	91	default y
6a108a14	92	bool "Special initialization for Ricoh bridges" if EXPERT
63e7ebd0 DR	93	depends on YENTA
	94
	95	config YENTA_TI
	96	default y
6a108a14	97	bool "Special initialization for TI and EnE bridges" if EXPERT
63e7ebd0 DR	98	depends on YENTA
	99
	100	config YENTA_ENE_TUNE
	101	default y
6a108a14	102	bool "Auto-tune EnE bridges for CB cards" if EXPERT
63e7ebd0 DR	103	depends on YENTA_TI && CARDBUS
	104
	105	config YENTA_TOSHIBA
	106	default y
6a108a14	107	bool "Special initialization for Toshiba ToPIC bridges" if EXPERT
63e7ebd0 DR	108	depends on YENTA
63e7ebd0 DR	109
1da177e4 LT	110	config PD6729
	111	tristate "Cirrus PD6729 compatible bridge support"
	112	depends on PCMCIA && PCI
02b03846 AC	113	select PCCARD_NONSTATIC if PCMCIA != n && ISA
02b03846 AC	114	select PCCARD_PCI if PCMCIA !=n && !ISA
1da177e4 LT	115	help
	116	This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
	117	device, found in some older laptops and PCMCIA card readers.
	118
	119	config I82092
	120	tristate "i82092 compatible bridge support"
	121	depends on PCMCIA && PCI
02b03846 AC	122	select PCCARD_NONSTATIC if PCMCIA != n && ISA
02b03846 AC	123	select PCCARD_PCI if PCMCIA !=n && !ISA
1da177e4 LT	124	help
	125	This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
	126	found in some older laptops and more commonly in evaluation boards for the
	127	chip.
	128
	129	config I82365
	130	tristate "i82365 compatible bridge support"
	131	depends on PCMCIA && ISA
	132	select PCCARD_NONSTATIC
	133	help
	134	Say Y here to include support for ISA-bus PCMCIA host bridges that
	135	are register compatible with the Intel i82365. These are found on
	136	older laptops and ISA-bus card readers for desktop systems. A
	137	"bridge" is the hardware inside your computer that PCMCIA cards are
	138	plugged into. If unsure, say N.
	139
	140	config TCIC
	141	tristate "Databook TCIC host bridge support"
81000808	142	depends on PCMCIA && ISA
1da177e4 LT	143	select PCCARD_NONSTATIC
	144	help
	145	Say Y here to include support for the Databook TCIC family of PCMCIA
	146	host bridges. These are only found on a handful of old systems.
	147	"Bridge" is the name used for the hardware inside your computer that
	148	PCMCIA cards are plugged into. If unsure, say N.
	149
66213b3c ML	150	config PCMCIA_ALCHEMY_DEVBOARD
66213b3c ML	151	tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
42a4f17d	152	depends on MIPS_ALCHEMY && PCMCIA
66213b3c ML	153	help
66213b3c ML	154	Enable this driver of you want PCMCIA support on your Alchemy
64cd04d0 ML	155	Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300
64cd04d0 ML	156	board. NOT suitable for the PB1000!
66213b3c ML	157
	158	This driver is also available as a module called db1xxx_ss.ko
	159
0273b4ef ML	160	config PCMCIA_XXS1500
	161	tristate "MyCable XXS1500 PCMCIA socket support"
	162	depends on PCMCIA && MIPS_XXS1500
0273b4ef ML	163	help
	164	Support for the PCMCIA/CF socket interface on MyCable XXS1500
	165	systems.
	166
	167	This driver is also available as a module called xxs1500_ss.ko
	168
553d6d5f MB	169	config PCMCIA_BCM63XX
	170	tristate "bcm63xx pcmcia support"
	171	depends on BCM63XX && PCMCIA
	172
0f767de6	173	config PCMCIA_SOC_COMMON
1bf8e621	174	tristate
0f767de6	175
136b758b RK	176	config PCMCIA_SA11XX_BASE
	177	tristate
	178
1da177e4 LT	179	config PCMCIA_SA1100
	180	tristate "SA1100 support"
	181	depends on ARM && ARCH_SA1100 && PCMCIA
0f767de6	182	select PCMCIA_SOC_COMMON
136b758b	183	select PCMCIA_SA11XX_BASE
1da177e4 LT	184	help
	185	Say Y here to include support for SA11x0-based PCMCIA or CF
	186	sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
	187	Xscale(R) embedded machines.
	188
	189	This driver is also available as a module called sa1100_cs.
	190
	191	config PCMCIA_SA1111
	192	tristate "SA1111 support"
11990b2b	193	depends on ARM && SA1111 && PCMCIA
0f767de6	194	select PCMCIA_SOC_COMMON
11990b2b	195	select PCMCIA_SA11XX_BASE if ARCH_SA1100
f1674f21	196	select PCMCIA_PXA2XX if ARCH_LUBBOCK && SA1111
1da177e4 LT	197	help
	198	Say Y here to include support for SA1111-based PCMCIA or CF
	199	sockets, found on the Jornada 720, Graphicsmaster and other
	200	StrongARM(R)/Xscale(R) embedded machines.
	201
	202	This driver is also available as a module called sa1111_cs.
	203
	204	config PCMCIA_PXA2XX
	205	tristate "PXA2xx support"
	206	depends on ARM && ARCH_PXA && PCMCIA
35978408	207	depends on (ARCH_LUBBOCK \|\| MACH_MAINSTONE \|\| PXA_SHARPSL \
cc513ac0	208	\|\| MACH_ARMCORE \|\| ARCH_PXA_PALM \|\| TRIZEPS_PCMCIA \
addff0fa	209	\|\| ARCOM_PCMCIA \|\| ARCH_PXA_ESERIES \|\| MACH_STARGATE2 \
fd62999b	210	\|\| MACH_VPAC270 \|\| MACH_BALLOON3 \|\| MACH_COLIBRI \
95244306	211	\|\| MACH_COLIBRI320 \|\| MACH_H4700)
0f767de6	212	select PCMCIA_SOC_COMMON
1da177e4 LT	213	help
	214	Say Y here to include support for the PXA2xx PCMCIA controller
	215
c9f50ddd DB	216	config PCMCIA_DEBUG
	217	bool "Enable debugging"
	218	depends on (PCMCIA_SA1111 \|\| PCMCIA_SA1100 \|\| PCMCIA_PXA2XX)
	219	help
	220	Say Y here to enable debugging for the SoC PCMCIA layer.
	221	You will need to choose the debugging level either via the
	222	kernel command line, or module options depending whether
	223	you build the drivers as modules.
	224
	225	The kernel command line options are:
	226	sa11xx_core.pc_debug=N
	227	pxa2xx_core.pc_debug=N
	228
	229	The module option is called pc_debug=N
	230
	231	In all the above examples, N is the debugging verbosity
	232	level.
	233
1da177e4 LT	234	config PCMCIA_PROBE
1da177e4 LT	235	bool
ea6add0b	236	default y if ISA && !ARCH_SA1100 && !PARISC
1da177e4 LT	237
	238	config M32R_PCC
	239	bool "M32R PCMCIA I/F"
	240	depends on M32R && CHIP_M32700 && PCMCIA
	241	help
	242	Say Y here to use the M32R PCMCIA controller.
	243
	244	config M32R_CFC
	245	bool "M32R CF I/F Controller"
934bb7f8	246	depends on M32R && (PLAT_USRV \|\| PLAT_M32700UT \|\| PLAT_MAPPI2 \|\| PLAT_MAPPI3 \|\| PLAT_OPSPUT)
1da177e4 LT	247	help
	248	Say Y here to use the M32R CompactFlash controller.
	249
	250	config M32R_CFC_NUM
	251	int "M32R CF I/F number"
	252	depends on M32R_CFC
934bb7f8	253	default "1" if PLAT_USRV \|\| PLAT_M32700UT \|\| PLAT_MAPPI2 \|\| PLAT_MAPPI3 \|\| PLAT_OPSPUT
1da177e4 LT	254	help
	255	Set the number of M32R CF slots.
	256
	257	config PCMCIA_VRC4171
	258	tristate "NEC VRC4171 Card Controllers support"
daaeb72b	259	depends on CPU_VR41XX && ISA && PCMCIA
1da177e4 LT	260
	261	config PCMCIA_VRC4173
	262	tristate "NEC VRC4173 CARDU support"
	263	depends on CPU_VR41XX && PCI && PCMCIA
	264
f74e48a5 DB	265	config OMAP_CF
	266	tristate "OMAP CompactFlash Controller"
	267	depends on PCMCIA && ARCH_OMAP16XX
	268	help
	269	Say Y here to support the CompactFlash controller on OMAP.
	270	Note that this doesn't support "True IDE" mode.
	271
785e821e MH	272	config BFIN_CFPCMCIA
	273	tristate "Blackfin CompactFlash PCMCIA Driver"
	274	depends on PCMCIA && BLACKFIN
	275	help
	276	Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
	277
	278
2c1f3b7a AV	279	config AT91_CF
2c1f3b7a AV	280	tristate "AT91 CompactFlash Controller"
ed9084ec	281	depends on PCMCIA && ARCH_AT91
98d67219	282	depends on !ARCH_MULTIPLATFORM
2c1f3b7a AV	283	help
	284	Say Y here to support the CompactFlash controller on AT91 chips.
	285	Or choose M to compile the driver as a module named "at91_cf".
	286
2b571a06 OJ	287	config ELECTRA_CF
	288	tristate "Electra CompactFlash Controller"
	289	depends on PCMCIA && PPC_PASEMI
	290	help
	291	Say Y here to support the CompactFlash controller on the
	292	PA Semi Electra eval board.
	293
02b03846 AC	294	config PCCARD_PCI
	295	bool
	296
1da177e4	297	config PCCARD_NONSTATIC
49b1153a	298	bool
1da177e4	299
3b27e942 DB	300	config PCCARD_IODYN
	301	bool
	302
1da177e4	303	endif # PCCARD