Commit | Line | Data |
---|---|---|
de957c89 MT |
1 | /* |
2 | * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series. | |
3 | * | |
cbba0de2 | 4 | * (C) 1999-2000 Magnus Damm <damm@opensource.se> |
de957c89 MT |
5 | * (C) 2001-2002 Montavista Software, Inc. |
6 | * <mlocke@mvista.com> | |
7 | * | |
8 | * Support for two slots by Cyclades Corporation | |
9 | * <oliver.kurth@cyclades.de> | |
10 | * Further fixes, v2.6 kernel port | |
11 | * <marcelo.tosatti@cyclades.com> | |
1371d3be | 12 | * |
80128ff7 | 13 | * Some fixes, additions (C) 2005-2007 Montavista Software, Inc. |
1371d3be | 14 | * <vbordug@ru.mvista.com> |
de957c89 MT |
15 | * |
16 | * "The ExCA standard specifies that socket controllers should provide | |
17 | * two IO and five memory windows per socket, which can be independently | |
18 | * configured and positioned in the host address space and mapped to | |
19 | * arbitrary segments of card address space. " - David A Hinds. 1999 | |
20 | * | |
21 | * This controller does _not_ meet the ExCA standard. | |
22 | * | |
23 | * m8xx pcmcia controller brief info: | |
24 | * + 8 windows (attrib, mem, i/o) | |
25 | * + up to two slots (SLOT_A and SLOT_B) | |
26 | * + inputpins, outputpins, event and mask registers. | |
27 | * - no offset register. sigh. | |
28 | * | |
29 | * Because of the lacking offset register we must map the whole card. | |
30 | * We assign each memory window PCMCIA_MEM_WIN_SIZE address space. | |
31 | * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO | |
32 | * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE. | |
33 | * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE. | |
34 | * They are maximum 64KByte each... | |
35 | */ | |
36 | ||
37 | #include <linux/module.h> | |
38 | #include <linux/init.h> | |
39 | #include <linux/types.h> | |
40 | #include <linux/fcntl.h> | |
41 | #include <linux/string.h> | |
42 | ||
de957c89 MT |
43 | #include <linux/kernel.h> |
44 | #include <linux/errno.h> | |
de957c89 MT |
45 | #include <linux/timer.h> |
46 | #include <linux/ioport.h> | |
47 | #include <linux/delay.h> | |
48 | #include <linux/interrupt.h> | |
80128ff7 | 49 | #include <linux/fsl_devices.h> |
1977f032 | 50 | #include <linux/bitops.h> |
ad19dbdb SR |
51 | #include <linux/of_device.h> |
52 | #include <linux/of_platform.h> | |
de957c89 | 53 | |
80128ff7 | 54 | #include <asm/io.h> |
80128ff7 | 55 | #include <asm/time.h> |
de957c89 MT |
56 | #include <asm/mpc8xx.h> |
57 | #include <asm/8xx_immap.h> | |
58 | #include <asm/irq.h> | |
80128ff7 | 59 | #include <asm/fs_pd.h> |
de957c89 | 60 | |
de957c89 MT |
61 | #include <pcmcia/ss.h> |
62 | ||
de957c89 MT |
63 | #define pcmcia_info(args...) printk(KERN_INFO "m8xx_pcmcia: "args) |
64 | #define pcmcia_error(args...) printk(KERN_ERR "m8xx_pcmcia: "args) | |
65 | ||
66 | static const char *version = "Version 0.06, Aug 2005"; | |
67 | MODULE_LICENSE("Dual MPL/GPL"); | |
68 | ||
69 | #if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) | |
70 | ||
71 | /* The RPX series use SLOT_B */ | |
72 | #if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE) | |
73 | #define CONFIG_PCMCIA_SLOT_B | |
74 | #define CONFIG_BD_IS_MHZ | |
75 | #endif | |
76 | ||
77 | /* The ADS board use SLOT_A */ | |
78 | #ifdef CONFIG_ADS | |
79 | #define CONFIG_PCMCIA_SLOT_A | |
80 | #define CONFIG_BD_IS_MHZ | |
81 | #endif | |
82 | ||
83 | /* The FADS series are a mess */ | |
84 | #ifdef CONFIG_FADS | |
85 | #if defined(CONFIG_MPC860T) || defined(CONFIG_MPC860) || defined(CONFIG_MPC821) | |
86 | #define CONFIG_PCMCIA_SLOT_A | |
87 | #else | |
88 | #define CONFIG_PCMCIA_SLOT_B | |
89 | #endif | |
90 | #endif | |
91 | ||
1371d3be VB |
92 | #if defined(CONFIG_MPC885ADS) |
93 | #define CONFIG_PCMCIA_SLOT_A | |
94 | #define PCMCIA_GLITCHY_CD | |
95 | #endif | |
96 | ||
de957c89 MT |
97 | /* Cyclades ACS uses both slots */ |
98 | #ifdef CONFIG_PRxK | |
99 | #define CONFIG_PCMCIA_SLOT_A | |
100 | #define CONFIG_PCMCIA_SLOT_B | |
101 | #endif | |
102 | ||
99121c0d | 103 | #endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */ |
de957c89 MT |
104 | |
105 | #if defined(CONFIG_PCMCIA_SLOT_A) && defined(CONFIG_PCMCIA_SLOT_B) | |
106 | ||
107 | #define PCMCIA_SOCKETS_NO 2 | |
108 | /* We have only 8 windows, dualsocket support will be limited. */ | |
109 | #define PCMCIA_MEM_WIN_NO 2 | |
110 | #define PCMCIA_IO_WIN_NO 2 | |
111 | #define PCMCIA_SLOT_MSG "SLOT_A and SLOT_B" | |
112 | ||
113 | #elif defined(CONFIG_PCMCIA_SLOT_A) || defined(CONFIG_PCMCIA_SLOT_B) | |
114 | ||
115 | #define PCMCIA_SOCKETS_NO 1 | |
116 | /* full support for one slot */ | |
117 | #define PCMCIA_MEM_WIN_NO 5 | |
118 | #define PCMCIA_IO_WIN_NO 2 | |
119 | ||
120 | /* define _slot_ to be able to optimize macros */ | |
121 | ||
122 | #ifdef CONFIG_PCMCIA_SLOT_A | |
123 | #define _slot_ 0 | |
124 | #define PCMCIA_SLOT_MSG "SLOT_A" | |
125 | #else | |
126 | #define _slot_ 1 | |
127 | #define PCMCIA_SLOT_MSG "SLOT_B" | |
128 | #endif | |
129 | ||
130 | #else | |
131 | #error m8xx_pcmcia: Bad configuration! | |
132 | #endif | |
133 | ||
134 | /* ------------------------------------------------------------------------- */ | |
135 | ||
99121c0d VB |
136 | #define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */ |
137 | #define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */ | |
138 | #define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */ | |
de957c89 MT |
139 | /* ------------------------------------------------------------------------- */ |
140 | ||
80128ff7 | 141 | static int pcmcia_schlvl; |
de957c89 | 142 | |
34af946a | 143 | static DEFINE_SPINLOCK(events_lock); |
de957c89 | 144 | |
de957c89 MT |
145 | #define PCMCIA_SOCKET_KEY_5V 1 |
146 | #define PCMCIA_SOCKET_KEY_LV 2 | |
147 | ||
148 | /* look up table for pgcrx registers */ | |
80128ff7 | 149 | static u32 *m8xx_pgcrx[2]; |
de957c89 MT |
150 | |
151 | /* | |
152 | * This structure is used to address each window in the PCMCIA controller. | |
153 | * | |
154 | * Keep in mind that we assume that pcmcia_win[n+1] is mapped directly | |
155 | * after pcmcia_win[n]... | |
156 | */ | |
157 | ||
158 | struct pcmcia_win { | |
99121c0d VB |
159 | u32 br; |
160 | u32 or; | |
de957c89 MT |
161 | }; |
162 | ||
163 | /* | |
164 | * For some reason the hardware guys decided to make both slots share | |
165 | * some registers. | |
166 | * | |
167 | * Could someone invent object oriented hardware ? | |
168 | * | |
169 | * The macros are used to get the right bit from the registers. | |
170 | * SLOT_A : slot = 0 | |
171 | * SLOT_B : slot = 1 | |
172 | */ | |
173 | ||
174 | #define M8XX_PCMCIA_VS1(slot) (0x80000000 >> (slot << 4)) | |
175 | #define M8XX_PCMCIA_VS2(slot) (0x40000000 >> (slot << 4)) | |
176 | #define M8XX_PCMCIA_VS_MASK(slot) (0xc0000000 >> (slot << 4)) | |
177 | #define M8XX_PCMCIA_VS_SHIFT(slot) (30 - (slot << 4)) | |
178 | ||
179 | #define M8XX_PCMCIA_WP(slot) (0x20000000 >> (slot << 4)) | |
180 | #define M8XX_PCMCIA_CD2(slot) (0x10000000 >> (slot << 4)) | |
181 | #define M8XX_PCMCIA_CD1(slot) (0x08000000 >> (slot << 4)) | |
182 | #define M8XX_PCMCIA_BVD2(slot) (0x04000000 >> (slot << 4)) | |
183 | #define M8XX_PCMCIA_BVD1(slot) (0x02000000 >> (slot << 4)) | |
184 | #define M8XX_PCMCIA_RDY(slot) (0x01000000 >> (slot << 4)) | |
185 | #define M8XX_PCMCIA_RDY_L(slot) (0x00800000 >> (slot << 4)) | |
186 | #define M8XX_PCMCIA_RDY_H(slot) (0x00400000 >> (slot << 4)) | |
187 | #define M8XX_PCMCIA_RDY_R(slot) (0x00200000 >> (slot << 4)) | |
188 | #define M8XX_PCMCIA_RDY_F(slot) (0x00100000 >> (slot << 4)) | |
189 | #define M8XX_PCMCIA_MASK(slot) (0xFFFF0000 >> (slot << 4)) | |
190 | ||
191 | #define M8XX_PCMCIA_POR_VALID 0x00000001 | |
192 | #define M8XX_PCMCIA_POR_WRPROT 0x00000002 | |
193 | #define M8XX_PCMCIA_POR_ATTRMEM 0x00000010 | |
194 | #define M8XX_PCMCIA_POR_IO 0x00000018 | |
195 | #define M8XX_PCMCIA_POR_16BIT 0x00000040 | |
196 | ||
197 | #define M8XX_PGCRX(slot) m8xx_pgcrx[slot] | |
198 | ||
199 | #define M8XX_PGCRX_CXOE 0x00000080 | |
200 | #define M8XX_PGCRX_CXRESET 0x00000040 | |
201 | ||
202 | /* we keep one lookup table per socket to check flags */ | |
203 | ||
99121c0d | 204 | #define PCMCIA_EVENTS_MAX 5 /* 4 max at a time + termination */ |
de957c89 MT |
205 | |
206 | struct event_table { | |
207 | u32 regbit; | |
208 | u32 eventbit; | |
209 | }; | |
210 | ||
80128ff7 VB |
211 | static const char driver_name[] = "m8xx-pcmcia"; |
212 | ||
de957c89 | 213 | struct socket_info { |
99121c0d VB |
214 | void (*handler) (void *info, u32 events); |
215 | void *info; | |
de957c89 MT |
216 | |
217 | u32 slot; | |
80128ff7 VB |
218 | pcmconf8xx_t *pcmcia; |
219 | u32 bus_freq; | |
220 | int hwirq; | |
de957c89 MT |
221 | |
222 | socket_state_t state; | |
223 | struct pccard_mem_map mem_win[PCMCIA_MEM_WIN_NO]; | |
99121c0d | 224 | struct pccard_io_map io_win[PCMCIA_IO_WIN_NO]; |
de957c89 MT |
225 | struct event_table events[PCMCIA_EVENTS_MAX]; |
226 | struct pcmcia_socket socket; | |
227 | }; | |
228 | ||
229 | static struct socket_info socket[PCMCIA_SOCKETS_NO]; | |
230 | ||
231 | /* | |
232 | * Search this table to see if the windowsize is | |
233 | * supported... | |
234 | */ | |
235 | ||
236 | #define M8XX_SIZES_NO 32 | |
237 | ||
99121c0d | 238 | static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] = { |
de957c89 MT |
239 | 0x00000001, 0x00000002, 0x00000008, 0x00000004, |
240 | 0x00000080, 0x00000040, 0x00000010, 0x00000020, | |
241 | 0x00008000, 0x00004000, 0x00001000, 0x00002000, | |
242 | 0x00000100, 0x00000200, 0x00000800, 0x00000400, | |
243 | ||
244 | 0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff, | |
245 | 0x01000000, 0x02000000, 0xffffffff, 0x04000000, | |
246 | 0x00010000, 0x00020000, 0x00080000, 0x00040000, | |
247 | 0x00800000, 0x00400000, 0x00100000, 0x00200000 | |
248 | }; | |
249 | ||
250 | /* ------------------------------------------------------------------------- */ | |
251 | ||
7d12e780 | 252 | static irqreturn_t m8xx_interrupt(int irq, void *dev); |
de957c89 | 253 | |
99121c0d | 254 | #define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */ |
de957c89 MT |
255 | |
256 | /* ------------------------------------------------------------------------- */ | |
257 | /* board specific stuff: */ | |
258 | /* voltage_set(), hardware_enable() and hardware_disable() */ | |
259 | /* ------------------------------------------------------------------------- */ | |
260 | /* RPX Boards from Embedded Planet */ | |
261 | ||
262 | #if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE) | |
263 | ||
264 | /* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks. | |
265 | * SYPCR is write once only, therefore must the slowest memory be faster | |
266 | * than the bus monitor or we will get a machine check due to the bus timeout. | |
267 | */ | |
268 | ||
269 | #define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE" | |
270 | ||
271 | #undef PCMCIA_BMT_LIMIT | |
272 | #define PCMCIA_BMT_LIMIT (6*8) | |
273 | ||
274 | static int voltage_set(int slot, int vcc, int vpp) | |
275 | { | |
276 | u32 reg = 0; | |
277 | ||
99121c0d VB |
278 | switch (vcc) { |
279 | case 0: | |
280 | break; | |
de957c89 MT |
281 | case 33: |
282 | reg |= BCSR1_PCVCTL4; | |
283 | break; | |
284 | case 50: | |
285 | reg |= BCSR1_PCVCTL5; | |
286 | break; | |
287 | default: | |
288 | return 1; | |
289 | } | |
290 | ||
99121c0d VB |
291 | switch (vpp) { |
292 | case 0: | |
293 | break; | |
de957c89 MT |
294 | case 33: |
295 | case 50: | |
99121c0d | 296 | if (vcc == vpp) |
de957c89 MT |
297 | reg |= BCSR1_PCVCTL6; |
298 | else | |
299 | return 1; | |
300 | break; | |
301 | case 120: | |
302 | reg |= BCSR1_PCVCTL7; | |
303 | default: | |
304 | return 1; | |
305 | } | |
306 | ||
99121c0d | 307 | if (!((vcc == 50) || (vcc == 0))) |
de957c89 MT |
308 | return 1; |
309 | ||
310 | /* first, turn off all power */ | |
311 | ||
99121c0d VB |
312 | out_be32(((u32 *) RPX_CSR_ADDR), |
313 | in_be32(((u32 *) RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 | | |
314 | BCSR1_PCVCTL5 | | |
315 | BCSR1_PCVCTL6 | | |
316 | BCSR1_PCVCTL7)); | |
de957c89 MT |
317 | |
318 | /* enable new powersettings */ | |
319 | ||
99121c0d | 320 | out_be32(((u32 *) RPX_CSR_ADDR), in_be32(((u32 *) RPX_CSR_ADDR)) | reg); |
de957c89 MT |
321 | |
322 | return 0; | |
323 | } | |
324 | ||
325 | #define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V | |
99121c0d VB |
326 | #define hardware_enable(_slot_) /* No hardware to enable */ |
327 | #define hardware_disable(_slot_) /* No hardware to disable */ | |
de957c89 | 328 | |
99121c0d | 329 | #endif /* CONFIG_RPXCLASSIC */ |
de957c89 MT |
330 | |
331 | /* FADS Boards from Motorola */ | |
332 | ||
333 | #if defined(CONFIG_FADS) | |
334 | ||
335 | #define PCMCIA_BOARD_MSG "FADS" | |
336 | ||
337 | static int voltage_set(int slot, int vcc, int vpp) | |
338 | { | |
339 | u32 reg = 0; | |
340 | ||
99121c0d VB |
341 | switch (vcc) { |
342 | case 0: | |
343 | break; | |
344 | case 33: | |
345 | reg |= BCSR1_PCCVCC0; | |
346 | break; | |
347 | case 50: | |
348 | reg |= BCSR1_PCCVCC1; | |
349 | break; | |
350 | default: | |
351 | return 1; | |
de957c89 MT |
352 | } |
353 | ||
99121c0d VB |
354 | switch (vpp) { |
355 | case 0: | |
356 | break; | |
357 | case 33: | |
358 | case 50: | |
359 | if (vcc == vpp) | |
360 | reg |= BCSR1_PCCVPP1; | |
361 | else | |
de957c89 | 362 | return 1; |
99121c0d VB |
363 | break; |
364 | case 120: | |
365 | if ((vcc == 33) || (vcc == 50)) | |
366 | reg |= BCSR1_PCCVPP0; | |
367 | else | |
368 | return 1; | |
369 | default: | |
370 | return 1; | |
de957c89 MT |
371 | } |
372 | ||
373 | /* first, turn off all power */ | |
99121c0d VB |
374 | out_be32((u32 *) BCSR1, |
375 | in_be32((u32 *) BCSR1) & ~(BCSR1_PCCVCC_MASK | | |
376 | BCSR1_PCCVPP_MASK)); | |
1371d3be VB |
377 | |
378 | /* enable new powersettings */ | |
99121c0d | 379 | out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | reg); |
1371d3be VB |
380 | |
381 | return 0; | |
382 | } | |
383 | ||
384 | #define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V | |
385 | ||
386 | static void hardware_enable(int slot) | |
387 | { | |
99121c0d | 388 | out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) & ~BCSR1_PCCEN); |
1371d3be VB |
389 | } |
390 | ||
391 | static void hardware_disable(int slot) | |
392 | { | |
99121c0d | 393 | out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | BCSR1_PCCEN); |
1371d3be VB |
394 | } |
395 | ||
396 | #endif | |
397 | ||
398 | /* MPC885ADS Boards */ | |
399 | ||
400 | #if defined(CONFIG_MPC885ADS) | |
401 | ||
402 | #define PCMCIA_BOARD_MSG "MPC885ADS" | |
80128ff7 | 403 | #define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V |
1371d3be | 404 | |
80128ff7 | 405 | static inline void hardware_enable(int slot) |
1371d3be | 406 | { |
99121c0d | 407 | m8xx_pcmcia_ops.hw_ctrl(slot, 1); |
de957c89 MT |
408 | } |
409 | ||
80128ff7 | 410 | static inline void hardware_disable(int slot) |
de957c89 | 411 | { |
80128ff7 | 412 | m8xx_pcmcia_ops.hw_ctrl(slot, 0); |
de957c89 MT |
413 | } |
414 | ||
80128ff7 | 415 | static inline int voltage_set(int slot, int vcc, int vpp) |
de957c89 | 416 | { |
80128ff7 | 417 | return m8xx_pcmcia_ops.voltage_set(slot, vcc, vpp); |
de957c89 MT |
418 | } |
419 | ||
420 | #endif | |
421 | ||
de957c89 MT |
422 | #if defined(CONFIG_PRxK) |
423 | #include <asm/cpld.h> | |
424 | extern volatile fpga_pc_regs *fpga_pc; | |
425 | ||
426 | #define PCMCIA_BOARD_MSG "MPC855T" | |
427 | ||
428 | static int voltage_set(int slot, int vcc, int vpp) | |
429 | { | |
430 | u8 reg = 0; | |
431 | u8 regread; | |
432 | cpld_regs *ccpld = get_cpld(); | |
433 | ||
99121c0d VB |
434 | switch (vcc) { |
435 | case 0: | |
436 | break; | |
437 | case 33: | |
438 | reg |= PCMCIA_VCC_33; | |
439 | break; | |
440 | case 50: | |
441 | reg |= PCMCIA_VCC_50; | |
442 | break; | |
443 | default: | |
444 | return 1; | |
de957c89 MT |
445 | } |
446 | ||
99121c0d VB |
447 | switch (vpp) { |
448 | case 0: | |
449 | break; | |
450 | case 33: | |
451 | case 50: | |
452 | if (vcc == vpp) | |
453 | reg |= PCMCIA_VPP_VCC; | |
454 | else | |
de957c89 | 455 | return 1; |
99121c0d VB |
456 | break; |
457 | case 120: | |
458 | if ((vcc == 33) || (vcc == 50)) | |
459 | reg |= PCMCIA_VPP_12; | |
460 | else | |
461 | return 1; | |
462 | default: | |
463 | return 1; | |
de957c89 MT |
464 | } |
465 | ||
466 | reg = reg >> (slot << 2); | |
467 | regread = in_8(&ccpld->fpga_pc_ctl); | |
99121c0d VB |
468 | if (reg != |
469 | (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) { | |
de957c89 | 470 | /* enable new powersettings */ |
99121c0d VB |
471 | regread = |
472 | regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> | |
473 | (slot << 2)); | |
de957c89 MT |
474 | out_8(&ccpld->fpga_pc_ctl, reg | regread); |
475 | msleep(100); | |
476 | } | |
477 | ||
478 | return 0; | |
479 | } | |
480 | ||
481 | #define socket_get(_slot_) PCMCIA_SOCKET_KEY_LV | |
99121c0d VB |
482 | #define hardware_enable(_slot_) /* No hardware to enable */ |
483 | #define hardware_disable(_slot_) /* No hardware to disable */ | |
de957c89 | 484 | |
99121c0d | 485 | #endif /* CONFIG_PRxK */ |
de957c89 | 486 | |
de957c89 | 487 | static u32 pending_events[PCMCIA_SOCKETS_NO]; |
34af946a | 488 | static DEFINE_SPINLOCK(pending_event_lock); |
de957c89 | 489 | |
7d12e780 | 490 | static irqreturn_t m8xx_interrupt(int irq, void *dev) |
de957c89 MT |
491 | { |
492 | struct socket_info *s; | |
493 | struct event_table *e; | |
494 | unsigned int i, events, pscr, pipr, per; | |
99121c0d | 495 | pcmconf8xx_t *pcmcia = socket[0].pcmcia; |
de957c89 | 496 | |
c9f50ddd | 497 | pr_debug("m8xx_pcmcia: Interrupt!\n"); |
de957c89 MT |
498 | /* get interrupt sources */ |
499 | ||
80128ff7 VB |
500 | pscr = in_be32(&pcmcia->pcmc_pscr); |
501 | pipr = in_be32(&pcmcia->pcmc_pipr); | |
502 | per = in_be32(&pcmcia->pcmc_per); | |
de957c89 | 503 | |
99121c0d | 504 | for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { |
de957c89 MT |
505 | s = &socket[i]; |
506 | e = &s->events[0]; | |
507 | events = 0; | |
508 | ||
99121c0d VB |
509 | while (e->regbit) { |
510 | if (pscr & e->regbit) | |
de957c89 MT |
511 | events |= e->eventbit; |
512 | ||
99121c0d | 513 | e++; |
de957c89 MT |
514 | } |
515 | ||
516 | /* | |
517 | * report only if both card detect signals are the same | |
518 | * not too nice done, | |
519 | * we depend on that CD2 is the bit to the left of CD1... | |
520 | */ | |
99121c0d VB |
521 | if (events & SS_DETECT) |
522 | if (((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^ | |
523 | (pipr & M8XX_PCMCIA_CD1(i))) { | |
de957c89 MT |
524 | events &= ~SS_DETECT; |
525 | } | |
de957c89 MT |
526 | #ifdef PCMCIA_GLITCHY_CD |
527 | /* | |
528 | * I've experienced CD problems with my ADS board. | |
529 | * We make an extra check to see if there was a | |
530 | * real change of Card detection. | |
531 | */ | |
532 | ||
99121c0d VB |
533 | if ((events & SS_DETECT) && |
534 | ((pipr & | |
535 | (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) && | |
536 | (s->state.Vcc | s->state.Vpp)) { | |
de957c89 MT |
537 | events &= ~SS_DETECT; |
538 | /*printk( "CD glitch workaround - CD = 0x%08x!\n", | |
99121c0d VB |
539 | (pipr & (M8XX_PCMCIA_CD2(i) |
540 | | M8XX_PCMCIA_CD1(i)))); */ | |
de957c89 MT |
541 | } |
542 | #endif | |
543 | ||
544 | /* call the handler */ | |
545 | ||
c9f50ddd | 546 | pr_debug("m8xx_pcmcia: slot %u: events = 0x%02x, pscr = 0x%08x, " |
99121c0d | 547 | "pipr = 0x%08x\n", i, events, pscr, pipr); |
de957c89 | 548 | |
99121c0d | 549 | if (events) { |
de957c89 MT |
550 | spin_lock(&pending_event_lock); |
551 | pending_events[i] |= events; | |
552 | spin_unlock(&pending_event_lock); | |
553 | /* | |
554 | * Turn off RDY_L bits in the PER mask on | |
555 | * CD interrupt receival. | |
556 | * | |
557 | * They can generate bad interrupts on the | |
558 | * ACS4,8,16,32. - marcelo | |
559 | */ | |
560 | per &= ~M8XX_PCMCIA_RDY_L(0); | |
561 | per &= ~M8XX_PCMCIA_RDY_L(1); | |
562 | ||
80128ff7 | 563 | out_be32(&pcmcia->pcmc_per, per); |
de957c89 MT |
564 | |
565 | if (events) | |
566 | pcmcia_parse_events(&socket[i].socket, events); | |
567 | } | |
568 | } | |
569 | ||
570 | /* clear the interrupt sources */ | |
80128ff7 | 571 | out_be32(&pcmcia->pcmc_pscr, pscr); |
de957c89 | 572 | |
c9f50ddd | 573 | pr_debug("m8xx_pcmcia: Interrupt done.\n"); |
de957c89 MT |
574 | |
575 | return IRQ_HANDLED; | |
576 | } | |
577 | ||
578 | static u32 m8xx_get_graycode(u32 size) | |
579 | { | |
580 | u32 k; | |
581 | ||
99121c0d VB |
582 | for (k = 0; k < M8XX_SIZES_NO; k++) |
583 | if (m8xx_size_to_gray[k] == size) | |
de957c89 MT |
584 | break; |
585 | ||
99121c0d | 586 | if ((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1)) |
de957c89 MT |
587 | k = -1; |
588 | ||
589 | return k; | |
590 | } | |
591 | ||
80128ff7 | 592 | static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq) |
de957c89 MT |
593 | { |
594 | u32 reg, clocks, psst, psl, psht; | |
595 | ||
99121c0d | 596 | if (!ns) { |
de957c89 MT |
597 | |
598 | /* | |
599 | * We get called with IO maps setup to 0ns | |
600 | * if not specified by the user. | |
601 | * They should be 255ns. | |
602 | */ | |
603 | ||
99121c0d | 604 | if (is_io) |
de957c89 MT |
605 | ns = 255; |
606 | else | |
99121c0d | 607 | ns = 100; /* fast memory if 0 */ |
de957c89 MT |
608 | } |
609 | ||
610 | /* | |
611 | * In PSST, PSL, PSHT fields we tell the controller | |
612 | * timing parameters in CLKOUT clock cycles. | |
613 | * CLKOUT is the same as GCLK2_50. | |
614 | */ | |
615 | ||
616 | /* how we want to adjust the timing - in percent */ | |
617 | ||
99121c0d | 618 | #define ADJ 180 /* 80 % longer accesstime - to be sure */ |
de957c89 | 619 | |
80128ff7 | 620 | clocks = ((bus_freq / 1000) * ns) / 1000; |
99121c0d VB |
621 | clocks = (clocks * ADJ) / (100 * 1000); |
622 | if (clocks >= PCMCIA_BMT_LIMIT) { | |
623 | printk("Max access time limit reached\n"); | |
624 | clocks = PCMCIA_BMT_LIMIT - 1; | |
de957c89 MT |
625 | } |
626 | ||
99121c0d VB |
627 | psst = clocks / 7; /* setup time */ |
628 | psht = clocks / 7; /* hold time */ | |
629 | psl = (clocks * 5) / 7; /* strobe length */ | |
de957c89 MT |
630 | |
631 | psst += clocks - (psst + psht + psl); | |
632 | ||
99121c0d VB |
633 | reg = psst << 12; |
634 | reg |= psl << 7; | |
de957c89 MT |
635 | reg |= psht << 16; |
636 | ||
637 | return reg; | |
638 | } | |
639 | ||
640 | static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value) | |
641 | { | |
642 | int lsock = container_of(sock, struct socket_info, socket)->slot; | |
643 | struct socket_info *s = &socket[lsock]; | |
644 | unsigned int pipr, reg; | |
80128ff7 | 645 | pcmconf8xx_t *pcmcia = s->pcmcia; |
de957c89 | 646 | |
80128ff7 | 647 | pipr = in_be32(&pcmcia->pcmc_pipr); |
de957c89 | 648 | |
99121c0d VB |
649 | *value = ((pipr & (M8XX_PCMCIA_CD1(lsock) |
650 | | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0; | |
de957c89 MT |
651 | *value |= (pipr & M8XX_PCMCIA_WP(lsock)) ? SS_WRPROT : 0; |
652 | ||
653 | if (s->state.flags & SS_IOCARD) | |
654 | *value |= (pipr & M8XX_PCMCIA_BVD1(lsock)) ? SS_STSCHG : 0; | |
655 | else { | |
656 | *value |= (pipr & M8XX_PCMCIA_RDY(lsock)) ? SS_READY : 0; | |
657 | *value |= (pipr & M8XX_PCMCIA_BVD1(lsock)) ? SS_BATDEAD : 0; | |
658 | *value |= (pipr & M8XX_PCMCIA_BVD2(lsock)) ? SS_BATWARN : 0; | |
659 | } | |
660 | ||
661 | if (s->state.Vcc | s->state.Vpp) | |
662 | *value |= SS_POWERON; | |
663 | ||
664 | /* | |
665 | * Voltage detection: | |
666 | * This driver only supports 16-Bit pc-cards. | |
667 | * Cardbus is not handled here. | |
668 | * | |
669 | * To determine what voltage to use we must read the VS1 and VS2 pin. | |
670 | * Depending on what socket type is present, | |
671 | * different combinations mean different things. | |
672 | * | |
673 | * Card Key Socket Key VS1 VS2 Card Vcc for CIS parse | |
674 | * | |
675 | * 5V 5V, LV* NC NC 5V only 5V (if available) | |
676 | * | |
677 | * 5V 5V, LV* GND NC 5 or 3.3V as low as possible | |
678 | * | |
679 | * 5V 5V, LV* GND GND 5, 3.3, x.xV as low as possible | |
680 | * | |
681 | * LV* 5V - - shall not fit into socket | |
682 | * | |
683 | * LV* LV* GND NC 3.3V only 3.3V | |
684 | * | |
685 | * LV* LV* NC GND x.xV x.xV (if avail.) | |
686 | * | |
687 | * LV* LV* GND GND 3.3 or x.xV as low as possible | |
688 | * | |
689 | * *LV means Low Voltage | |
690 | * | |
691 | * | |
692 | * That gives us the following table: | |
693 | * | |
694 | * Socket VS1 VS2 Voltage | |
695 | * | |
696 | * 5V NC NC 5V | |
697 | * 5V NC GND none (should not be possible) | |
698 | * 5V GND NC >= 3.3V | |
699 | * 5V GND GND >= x.xV | |
700 | * | |
701 | * LV NC NC 5V (if available) | |
702 | * LV NC GND x.xV (if available) | |
703 | * LV GND NC 3.3V | |
704 | * LV GND GND >= x.xV | |
705 | * | |
706 | * So, how do I determine if I have a 5V or a LV | |
707 | * socket on my board? Look at the socket! | |
708 | * | |
709 | * | |
710 | * Socket with 5V key: | |
711 | * ++--------------------------------------------+ | |
712 | * || | | |
713 | * || || | |
714 | * || || | |
715 | * | | | |
716 | * +---------------------------------------------+ | |
717 | * | |
718 | * Socket with LV key: | |
719 | * ++--------------------------------------------+ | |
720 | * || | | |
721 | * | || | |
722 | * | || | |
723 | * | | | |
724 | * +---------------------------------------------+ | |
725 | * | |
726 | * | |
727 | * With other words - LV only cards does not fit | |
728 | * into the 5V socket! | |
729 | */ | |
730 | ||
731 | /* read out VS1 and VS2 */ | |
732 | ||
733 | reg = (pipr & M8XX_PCMCIA_VS_MASK(lsock)) | |
99121c0d | 734 | >> M8XX_PCMCIA_VS_SHIFT(lsock); |
de957c89 | 735 | |
99121c0d VB |
736 | if (socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) { |
737 | switch (reg) { | |
de957c89 MT |
738 | case 1: |
739 | *value |= SS_3VCARD; | |
99121c0d | 740 | break; /* GND, NC - 3.3V only */ |
de957c89 MT |
741 | case 2: |
742 | *value |= SS_XVCARD; | |
99121c0d | 743 | break; /* NC. GND - x.xV only */ |
de957c89 MT |
744 | }; |
745 | } | |
746 | ||
c9f50ddd | 747 | pr_debug("m8xx_pcmcia: GetStatus(%d) = %#2.2x\n", lsock, *value); |
de957c89 MT |
748 | return 0; |
749 | } | |
750 | ||
99121c0d | 751 | static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t * state) |
de957c89 MT |
752 | { |
753 | int lsock = container_of(sock, struct socket_info, socket)->slot; | |
754 | struct socket_info *s = &socket[lsock]; | |
755 | struct event_table *e; | |
756 | unsigned int reg; | |
757 | unsigned long flags; | |
80128ff7 | 758 | pcmconf8xx_t *pcmcia = socket[0].pcmcia; |
de957c89 | 759 | |
c9f50ddd | 760 | pr_debug("m8xx_pcmcia: SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, " |
99121c0d VB |
761 | "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags, |
762 | state->Vcc, state->Vpp, state->io_irq, state->csc_mask); | |
de957c89 MT |
763 | |
764 | /* First, set voltage - bail out if invalid */ | |
99121c0d | 765 | if (voltage_set(lsock, state->Vcc, state->Vpp)) |
de957c89 MT |
766 | return -EINVAL; |
767 | ||
768 | /* Take care of reset... */ | |
99121c0d VB |
769 | if (state->flags & SS_RESET) |
770 | out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */ | |
de957c89 | 771 | else |
99121c0d VB |
772 | out_be32(M8XX_PGCRX(lsock), |
773 | in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET); | |
de957c89 MT |
774 | |
775 | /* ... and output enable. */ | |
776 | ||
777 | /* The CxOE signal is connected to a 74541 on the ADS. | |
778 | I guess most other boards used the ADS as a reference. | |
779 | I tried to control the CxOE signal with SS_OUTPUT_ENA, | |
780 | but the reset signal seems connected via the 541. | |
781 | If the CxOE is left high are some signals tristated and | |
f26fc4e0 | 782 | no pullups are present -> the cards act weird. |
de957c89 MT |
783 | So right now the buffers are enabled if the power is on. */ |
784 | ||
99121c0d VB |
785 | if (state->Vcc || state->Vpp) |
786 | out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE); /* active low */ | |
de957c89 | 787 | else |
99121c0d VB |
788 | out_be32(M8XX_PGCRX(lsock), |
789 | in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE); | |
de957c89 MT |
790 | |
791 | /* | |
792 | * We'd better turn off interrupts before | |
793 | * we mess with the events-table.. | |
794 | */ | |
795 | ||
796 | spin_lock_irqsave(&events_lock, flags); | |
797 | ||
798 | /* | |
799 | * Play around with the interrupt mask to be able to | |
800 | * give the events the generic pcmcia driver wants us to. | |
801 | */ | |
802 | ||
803 | e = &s->events[0]; | |
804 | reg = 0; | |
805 | ||
99121c0d | 806 | if (state->csc_mask & SS_DETECT) { |
de957c89 MT |
807 | e->eventbit = SS_DETECT; |
808 | reg |= e->regbit = (M8XX_PCMCIA_CD2(lsock) | |
809 | | M8XX_PCMCIA_CD1(lsock)); | |
810 | e++; | |
811 | } | |
99121c0d | 812 | if (state->flags & SS_IOCARD) { |
de957c89 MT |
813 | /* |
814 | * I/O card | |
815 | */ | |
99121c0d | 816 | if (state->csc_mask & SS_STSCHG) { |
de957c89 MT |
817 | e->eventbit = SS_STSCHG; |
818 | reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock); | |
819 | e++; | |
820 | } | |
821 | /* | |
822 | * If io_irq is non-zero we should enable irq. | |
823 | */ | |
99121c0d | 824 | if (state->io_irq) { |
80128ff7 | 825 | out_be32(M8XX_PGCRX(lsock), |
99121c0d VB |
826 | in_be32(M8XX_PGCRX(lsock)) | |
827 | mk_int_int_mask(s->hwirq) << 24); | |
de957c89 MT |
828 | /* |
829 | * Strange thing here: | |
830 | * The manual does not tell us which interrupt | |
831 | * the sources generate. | |
832 | * Anyhow, I found out that RDY_L generates IREQLVL. | |
833 | * | |
834 | * We use level triggerd interrupts, and they don't | |
835 | * have to be cleared in PSCR in the interrupt handler. | |
836 | */ | |
837 | reg |= M8XX_PCMCIA_RDY_L(lsock); | |
99121c0d VB |
838 | } else |
839 | out_be32(M8XX_PGCRX(lsock), | |
840 | in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff); | |
841 | } else { | |
de957c89 MT |
842 | /* |
843 | * Memory card | |
844 | */ | |
99121c0d | 845 | if (state->csc_mask & SS_BATDEAD) { |
de957c89 MT |
846 | e->eventbit = SS_BATDEAD; |
847 | reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock); | |
848 | e++; | |
849 | } | |
99121c0d | 850 | if (state->csc_mask & SS_BATWARN) { |
de957c89 MT |
851 | e->eventbit = SS_BATWARN; |
852 | reg |= e->regbit = M8XX_PCMCIA_BVD2(lsock); | |
853 | e++; | |
854 | } | |
855 | /* What should I trigger on - low/high,raise,fall? */ | |
99121c0d | 856 | if (state->csc_mask & SS_READY) { |
de957c89 | 857 | e->eventbit = SS_READY; |
99121c0d | 858 | reg |= e->regbit = 0; //?? |
de957c89 MT |
859 | e++; |
860 | } | |
861 | } | |
862 | ||
99121c0d | 863 | e->regbit = 0; /* terminate list */ |
de957c89 MT |
864 | |
865 | /* | |
866 | * Clear the status changed . | |
867 | * Port A and Port B share the same port. | |
868 | * Writing ones will clear the bits. | |
869 | */ | |
870 | ||
80128ff7 | 871 | out_be32(&pcmcia->pcmc_pscr, reg); |
de957c89 MT |
872 | |
873 | /* | |
874 | * Write the mask. | |
875 | * Port A and Port B share the same port. | |
876 | * Need for read-modify-write. | |
877 | * Ones will enable the interrupt. | |
878 | */ | |
879 | ||
99121c0d VB |
880 | reg |= |
881 | in_be32(&pcmcia-> | |
882 | pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1)); | |
80128ff7 | 883 | out_be32(&pcmcia->pcmc_per, reg); |
de957c89 MT |
884 | |
885 | spin_unlock_irqrestore(&events_lock, flags); | |
886 | ||
887 | /* copy the struct and modify the copy */ | |
888 | ||
889 | s->state = *state; | |
890 | ||
891 | return 0; | |
892 | } | |
893 | ||
894 | static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io) | |
895 | { | |
896 | int lsock = container_of(sock, struct socket_info, socket)->slot; | |
897 | ||
898 | struct socket_info *s = &socket[lsock]; | |
899 | struct pcmcia_win *w; | |
900 | unsigned int reg, winnr; | |
80128ff7 VB |
901 | pcmconf8xx_t *pcmcia = s->pcmcia; |
902 | ||
de957c89 MT |
903 | #define M8XX_SIZE (io->stop - io->start + 1) |
904 | #define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start) | |
905 | ||
c9f50ddd | 906 | pr_debug("m8xx_pcmcia: SetIOMap(%d, %d, %#2.2x, %d ns, " |
5f784336 WS |
907 | "%#4.4llx-%#4.4llx)\n", lsock, io->map, io->flags, |
908 | io->speed, (unsigned long long)io->start, | |
909 | (unsigned long long)io->stop); | |
de957c89 MT |
910 | |
911 | if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff) | |
912 | || (io->stop > 0xffff) || (io->stop < io->start)) | |
913 | return -EINVAL; | |
914 | ||
99121c0d | 915 | if ((reg = m8xx_get_graycode(M8XX_SIZE)) == -1) |
de957c89 MT |
916 | return -EINVAL; |
917 | ||
99121c0d | 918 | if (io->flags & MAP_ACTIVE) { |
de957c89 | 919 | |
c9f50ddd | 920 | pr_debug("m8xx_pcmcia: io->flags & MAP_ACTIVE\n"); |
de957c89 MT |
921 | |
922 | winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO) | |
99121c0d | 923 | + (lsock * PCMCIA_IO_WIN_NO) + io->map; |
de957c89 MT |
924 | |
925 | /* setup registers */ | |
926 | ||
99121c0d | 927 | w = (void *)&pcmcia->pcmc_pbr0; |
de957c89 MT |
928 | w += winnr; |
929 | ||
99121c0d | 930 | out_be32(&w->or, 0); /* turn off window first */ |
de957c89 MT |
931 | out_be32(&w->br, M8XX_BASE); |
932 | ||
933 | reg <<= 27; | |
99121c0d | 934 | reg |= M8XX_PCMCIA_POR_IO | (lsock << 2); |
de957c89 | 935 | |
80128ff7 | 936 | reg |= m8xx_get_speed(io->speed, 1, s->bus_freq); |
de957c89 | 937 | |
99121c0d | 938 | if (io->flags & MAP_WRPROT) |
de957c89 MT |
939 | reg |= M8XX_PCMCIA_POR_WRPROT; |
940 | ||
99121c0d VB |
941 | /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ)) */ |
942 | if (io->flags & MAP_16BIT) | |
de957c89 MT |
943 | reg |= M8XX_PCMCIA_POR_16BIT; |
944 | ||
99121c0d | 945 | if (io->flags & MAP_ACTIVE) |
de957c89 MT |
946 | reg |= M8XX_PCMCIA_POR_VALID; |
947 | ||
948 | out_be32(&w->or, reg); | |
949 | ||
c9f50ddd DB |
950 | pr_debug("m8xx_pcmcia: Socket %u: Mapped io window %u at " |
951 | "%#8.8x, OR = %#8.8x.\n", lsock, io->map, w->br, w->or); | |
de957c89 MT |
952 | } else { |
953 | /* shutdown IO window */ | |
954 | winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO) | |
99121c0d | 955 | + (lsock * PCMCIA_IO_WIN_NO) + io->map; |
de957c89 MT |
956 | |
957 | /* setup registers */ | |
958 | ||
99121c0d | 959 | w = (void *)&pcmcia->pcmc_pbr0; |
de957c89 MT |
960 | w += winnr; |
961 | ||
99121c0d VB |
962 | out_be32(&w->or, 0); /* turn off window */ |
963 | out_be32(&w->br, 0); /* turn off base address */ | |
de957c89 | 964 | |
c9f50ddd DB |
965 | pr_debug("m8xx_pcmcia: Socket %u: Unmapped io window %u at " |
966 | "%#8.8x, OR = %#8.8x.\n", lsock, io->map, w->br, w->or); | |
de957c89 MT |
967 | } |
968 | ||
969 | /* copy the struct and modify the copy */ | |
970 | s->io_win[io->map] = *io; | |
99121c0d | 971 | s->io_win[io->map].flags &= (MAP_WRPROT | MAP_16BIT | MAP_ACTIVE); |
c9f50ddd | 972 | pr_debug("m8xx_pcmcia: SetIOMap exit\n"); |
de957c89 MT |
973 | |
974 | return 0; | |
975 | } | |
976 | ||
99121c0d VB |
977 | static int m8xx_set_mem_map(struct pcmcia_socket *sock, |
978 | struct pccard_mem_map *mem) | |
de957c89 MT |
979 | { |
980 | int lsock = container_of(sock, struct socket_info, socket)->slot; | |
981 | struct socket_info *s = &socket[lsock]; | |
982 | struct pcmcia_win *w; | |
983 | struct pccard_mem_map *old; | |
984 | unsigned int reg, winnr; | |
80128ff7 | 985 | pcmconf8xx_t *pcmcia = s->pcmcia; |
de957c89 | 986 | |
c9f50ddd | 987 | pr_debug("m8xx_pcmcia: SetMemMap(%d, %d, %#2.2x, %d ns, " |
5f784336 WS |
988 | "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags, |
989 | mem->speed, (unsigned long long)mem->static_start, | |
990 | mem->card_start); | |
de957c89 MT |
991 | |
992 | if ((mem->map >= PCMCIA_MEM_WIN_NO) | |
99121c0d | 993 | // || ((mem->s) >= PCMCIA_MEM_WIN_SIZE) |
de957c89 | 994 | || (mem->card_start >= 0x04000000) |
99121c0d VB |
995 | || (mem->static_start & 0xfff) /* 4KByte resolution */ |
996 | ||(mem->card_start & 0xfff)) | |
de957c89 MT |
997 | return -EINVAL; |
998 | ||
99121c0d VB |
999 | if ((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) { |
1000 | printk("Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE); | |
de957c89 MT |
1001 | return -EINVAL; |
1002 | } | |
1003 | reg <<= 27; | |
1004 | ||
1005 | winnr = (lsock * PCMCIA_MEM_WIN_NO) + mem->map; | |
1006 | ||
1007 | /* Setup the window in the pcmcia controller */ | |
1008 | ||
99121c0d | 1009 | w = (void *)&pcmcia->pcmc_pbr0; |
de957c89 MT |
1010 | w += winnr; |
1011 | ||
1012 | reg |= lsock << 2; | |
1013 | ||
80128ff7 | 1014 | reg |= m8xx_get_speed(mem->speed, 0, s->bus_freq); |
de957c89 | 1015 | |
99121c0d VB |
1016 | if (mem->flags & MAP_ATTRIB) |
1017 | reg |= M8XX_PCMCIA_POR_ATTRMEM; | |
de957c89 | 1018 | |
99121c0d | 1019 | if (mem->flags & MAP_WRPROT) |
de957c89 MT |
1020 | reg |= M8XX_PCMCIA_POR_WRPROT; |
1021 | ||
99121c0d | 1022 | if (mem->flags & MAP_16BIT) |
de957c89 MT |
1023 | reg |= M8XX_PCMCIA_POR_16BIT; |
1024 | ||
99121c0d | 1025 | if (mem->flags & MAP_ACTIVE) |
de957c89 MT |
1026 | reg |= M8XX_PCMCIA_POR_VALID; |
1027 | ||
1028 | out_be32(&w->or, reg); | |
1029 | ||
c9f50ddd | 1030 | pr_debug("m8xx_pcmcia: Socket %u: Mapped memory window %u at %#8.8x, " |
99121c0d | 1031 | "OR = %#8.8x.\n", lsock, mem->map, w->br, w->or); |
de957c89 | 1032 | |
99121c0d | 1033 | if (mem->flags & MAP_ACTIVE) { |
de957c89 MT |
1034 | /* get the new base address */ |
1035 | mem->static_start = PCMCIA_MEM_WIN_BASE + | |
99121c0d VB |
1036 | (PCMCIA_MEM_WIN_SIZE * winnr) |
1037 | + mem->card_start; | |
de957c89 MT |
1038 | } |
1039 | ||
c9f50ddd | 1040 | pr_debug("m8xx_pcmcia: SetMemMap(%d, %d, %#2.2x, %d ns, " |
5f784336 WS |
1041 | "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags, |
1042 | mem->speed, (unsigned long long)mem->static_start, | |
1043 | mem->card_start); | |
de957c89 MT |
1044 | |
1045 | /* copy the struct and modify the copy */ | |
1046 | ||
1047 | old = &s->mem_win[mem->map]; | |
1048 | ||
1049 | *old = *mem; | |
99121c0d | 1050 | old->flags &= (MAP_ATTRIB | MAP_WRPROT | MAP_16BIT | MAP_ACTIVE); |
de957c89 MT |
1051 | |
1052 | return 0; | |
1053 | } | |
1054 | ||
1055 | static int m8xx_sock_init(struct pcmcia_socket *sock) | |
1056 | { | |
1057 | int i; | |
1058 | pccard_io_map io = { 0, 0, 0, 0, 1 }; | |
1059 | pccard_mem_map mem = { 0, 0, 0, 0, 0, 0 }; | |
1060 | ||
c9f50ddd | 1061 | pr_debug("m8xx_pcmcia: sock_init(%d)\n", s); |
de957c89 MT |
1062 | |
1063 | m8xx_set_socket(sock, &dead_socket); | |
1064 | for (i = 0; i < PCMCIA_IO_WIN_NO; i++) { | |
1065 | io.map = i; | |
1066 | m8xx_set_io_map(sock, &io); | |
1067 | } | |
1068 | for (i = 0; i < PCMCIA_MEM_WIN_NO; i++) { | |
1069 | mem.map = i; | |
1070 | m8xx_set_mem_map(sock, &mem); | |
1071 | } | |
1072 | ||
1073 | return 0; | |
1074 | ||
1075 | } | |
1076 | ||
80128ff7 | 1077 | static int m8xx_sock_suspend(struct pcmcia_socket *sock) |
de957c89 MT |
1078 | { |
1079 | return m8xx_set_socket(sock, &dead_socket); | |
1080 | } | |
1081 | ||
1082 | static struct pccard_operations m8xx_services = { | |
99121c0d | 1083 | .init = m8xx_sock_init, |
80128ff7 | 1084 | .suspend = m8xx_sock_suspend, |
de957c89 | 1085 | .get_status = m8xx_get_status, |
de957c89 MT |
1086 | .set_socket = m8xx_set_socket, |
1087 | .set_io_map = m8xx_set_io_map, | |
1088 | .set_mem_map = m8xx_set_mem_map, | |
1089 | }; | |
1090 | ||
1c48a5c9 | 1091 | static int __init m8xx_probe(struct platform_device *ofdev) |
de957c89 MT |
1092 | { |
1093 | struct pcmcia_win *w; | |
80128ff7 VB |
1094 | unsigned int i, m, hwirq; |
1095 | pcmconf8xx_t *pcmcia; | |
1096 | int status; | |
2005ce35 | 1097 | struct device_node *np = ofdev->dev.of_node; |
de957c89 MT |
1098 | |
1099 | pcmcia_info("%s\n", version); | |
1100 | ||
80128ff7 | 1101 | pcmcia = of_iomap(np, 0); |
99121c0d | 1102 | if (pcmcia == NULL) |
80128ff7 VB |
1103 | return -EINVAL; |
1104 | ||
1105 | pcmcia_schlvl = irq_of_parse_and_map(np, 0); | |
99121c0d | 1106 | hwirq = irq_map[pcmcia_schlvl].hwirq; |
5a1c3e1a JL |
1107 | if (pcmcia_schlvl < 0) { |
1108 | iounmap(pcmcia); | |
80128ff7 | 1109 | return -EINVAL; |
5a1c3e1a | 1110 | } |
80128ff7 VB |
1111 | |
1112 | m8xx_pgcrx[0] = &pcmcia->pcmc_pgcra; | |
1113 | m8xx_pgcrx[1] = &pcmcia->pcmc_pgcrb; | |
1114 | ||
de957c89 | 1115 | pcmcia_info(PCMCIA_BOARD_MSG " using " PCMCIA_SLOT_MSG |
80128ff7 | 1116 | " with IRQ %u (%d). \n", pcmcia_schlvl, hwirq); |
de957c89 MT |
1117 | |
1118 | /* Configure Status change interrupt */ | |
1119 | ||
99121c0d VB |
1120 | if (request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED, |
1121 | driver_name, socket)) { | |
de957c89 MT |
1122 | pcmcia_error("Cannot allocate IRQ %u for SCHLVL!\n", |
1123 | pcmcia_schlvl); | |
5a1c3e1a | 1124 | iounmap(pcmcia); |
de957c89 MT |
1125 | return -1; |
1126 | } | |
1127 | ||
99121c0d | 1128 | w = (void *)&pcmcia->pcmc_pbr0; |
de957c89 | 1129 | |
99121c0d | 1130 | out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1)); |
80128ff7 | 1131 | clrbits32(&pcmcia->pcmc_per, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1)); |
de957c89 | 1132 | |
80128ff7 | 1133 | /* connect interrupt and disable CxOE */ |
de957c89 | 1134 | |
99121c0d VB |
1135 | out_be32(M8XX_PGCRX(0), |
1136 | M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16)); | |
1137 | out_be32(M8XX_PGCRX(1), | |
1138 | M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16)); | |
de957c89 | 1139 | |
b595076a | 1140 | /* initialize the fixed memory windows */ |
de957c89 | 1141 | |
99121c0d | 1142 | for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { |
80128ff7 | 1143 | for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) { |
de957c89 | 1144 | out_be32(&w->br, PCMCIA_MEM_WIN_BASE + |
99121c0d VB |
1145 | (PCMCIA_MEM_WIN_SIZE |
1146 | * (m + i * PCMCIA_MEM_WIN_NO))); | |
de957c89 | 1147 | |
99121c0d | 1148 | out_be32(&w->or, 0); /* set to not valid */ |
de957c89 MT |
1149 | |
1150 | w++; | |
1151 | } | |
1152 | } | |
1153 | ||
80128ff7 | 1154 | /* turn off voltage */ |
de957c89 MT |
1155 | voltage_set(0, 0, 0); |
1156 | voltage_set(1, 0, 0); | |
1157 | ||
80128ff7 | 1158 | /* Enable external hardware */ |
de957c89 MT |
1159 | hardware_enable(0); |
1160 | hardware_enable(1); | |
1161 | ||
99121c0d | 1162 | for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { |
de957c89 MT |
1163 | socket[i].slot = i; |
1164 | socket[i].socket.owner = THIS_MODULE; | |
99121c0d VB |
1165 | socket[i].socket.features = |
1166 | SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP; | |
de957c89 MT |
1167 | socket[i].socket.irq_mask = 0x000; |
1168 | socket[i].socket.map_size = 0x1000; | |
1169 | socket[i].socket.io_offset = 0; | |
80128ff7 | 1170 | socket[i].socket.pci_irq = pcmcia_schlvl; |
de957c89 | 1171 | socket[i].socket.ops = &m8xx_services; |
4e8804ff | 1172 | socket[i].socket.resource_ops = &pccard_iodyn_ops; |
de957c89 | 1173 | socket[i].socket.cb_dev = NULL; |
80128ff7 VB |
1174 | socket[i].socket.dev.parent = &ofdev->dev; |
1175 | socket[i].pcmcia = pcmcia; | |
1176 | socket[i].bus_freq = ppc_proc_freq; | |
1177 | socket[i].hwirq = hwirq; | |
1178 | ||
de957c89 MT |
1179 | } |
1180 | ||
80128ff7 VB |
1181 | for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { |
1182 | status = pcmcia_register_socket(&socket[i].socket); | |
1183 | if (status < 0) | |
1184 | pcmcia_error("Socket register failed\n"); | |
1185 | } | |
de957c89 MT |
1186 | |
1187 | return 0; | |
1188 | } | |
1189 | ||
2dc11581 | 1190 | static int m8xx_remove(struct platform_device *ofdev) |
de957c89 | 1191 | { |
80128ff7 VB |
1192 | u32 m, i; |
1193 | struct pcmcia_win *w; | |
1194 | pcmconf8xx_t *pcmcia = socket[0].pcmcia; | |
1195 | ||
1196 | for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { | |
99121c0d | 1197 | w = (void *)&pcmcia->pcmc_pbr0; |
80128ff7 VB |
1198 | |
1199 | out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(i)); | |
1200 | out_be32(&pcmcia->pcmc_per, | |
99121c0d | 1201 | in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i)); |
de957c89 | 1202 | |
80128ff7 VB |
1203 | /* turn off interrupt and disable CxOE */ |
1204 | out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE); | |
1205 | ||
1206 | /* turn off memory windows */ | |
1207 | for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) { | |
99121c0d | 1208 | out_be32(&w->or, 0); /* set to not valid */ |
80128ff7 VB |
1209 | w++; |
1210 | } | |
1211 | ||
1212 | /* turn off voltage */ | |
1213 | voltage_set(i, 0, 0); | |
1214 | ||
1215 | /* disable external hardware */ | |
1216 | hardware_disable(i); | |
1217 | } | |
de957c89 MT |
1218 | for (i = 0; i < PCMCIA_SOCKETS_NO; i++) |
1219 | pcmcia_unregister_socket(&socket[i].socket); | |
5a1c3e1a | 1220 | iounmap(pcmcia); |
de957c89 | 1221 | |
80128ff7 | 1222 | free_irq(pcmcia_schlvl, NULL); |
de957c89 | 1223 | |
80128ff7 VB |
1224 | return 0; |
1225 | } | |
1226 | ||
63c9a8b3 | 1227 | static const struct of_device_id m8xx_pcmcia_match[] = { |
80128ff7 | 1228 | { |
99121c0d VB |
1229 | .type = "pcmcia", |
1230 | .compatible = "fsl,pq-pcmcia", | |
1231 | }, | |
80128ff7 VB |
1232 | {}, |
1233 | }; | |
1234 | ||
1235 | MODULE_DEVICE_TABLE(of, m8xx_pcmcia_match); | |
1236 | ||
1c48a5c9 | 1237 | static struct platform_driver m8xx_pcmcia_driver = { |
4018294b GL |
1238 | .driver = { |
1239 | .name = driver_name, | |
1240 | .owner = THIS_MODULE, | |
2005ce35 | 1241 | .of_match_table = m8xx_pcmcia_match, |
4018294b | 1242 | }, |
99121c0d VB |
1243 | .probe = m8xx_probe, |
1244 | .remove = m8xx_remove, | |
80128ff7 VB |
1245 | }; |
1246 | ||
5d95f8e2 | 1247 | module_platform_driver(m8xx_pcmcia_driver); |