[deliverable/linux.git] / drivers / pinctrl / Kconfig

#
# PINCTRL infrastructure and drivers
#

config PINCTRL
	bool

if PINCTRL

menu "Pin controllers"
	depends on PINCTRL

config PINMUX
	bool "Support pin multiplexing controllers"

config PINCONF
	bool "Support pin configuration controllers"

config GENERIC_PINCONF
	bool
	select PINCONF

config DEBUG_PINCTRL
	bool "Debug PINCTRL calls"
	depends on DEBUG_KERNEL
	help
	  Say Y here to add some extra checks and diagnostics to PINCTRL calls.

config PINCTRL_ABX500
	bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions"
	depends on AB8500_CORE
	select GENERIC_PINCONF
	help
	  Select this to enable the ABx500 family IC GPIO driver

config PINCTRL_AB8500
	bool "AB8500 pin controller driver"
	depends on PINCTRL_ABX500 && ARCH_U8500

config PINCTRL_AB8540
	bool "AB8540 pin controller driver"
	depends on PINCTRL_ABX500 && ARCH_U8500

config PINCTRL_AB9540
	bool "AB9540 pin controller driver"
	depends on PINCTRL_ABX500 && ARCH_U8500

config PINCTRL_AB8505
	bool "AB8505 pin controller driver"
	depends on PINCTRL_ABX500 && ARCH_U8500

config PINCTRL_ADI2
	bool "ADI pin controller driver"
	depends on BLACKFIN
	select PINMUX
	select IRQ_DOMAIN
	help
	  This is the pin controller and gpio driver for ADI BF54x, BF60x and
	  future processors. This option is selected automatically when specific
	  machine and arch are selected to build.

config PINCTRL_AS3722
	bool "Pinctrl and GPIO driver for ams AS3722 PMIC"
	depends on MFD_AS3722 && GPIOLIB
	select PINMUX
	select GENERIC_PINCONF
	help
	  AS3722 device supports the configuration of GPIO pins for different
	  functionality. This driver supports the pinmux, push-pull and
	  open drain configuration for the GPIO pins of AS3722 devices. It also
	  supports the GPIO functionality through gpiolib.

config PINCTRL_BF54x
	def_bool y if BF54x
	select PINCTRL_ADI2

config PINCTRL_BF60x
	def_bool y if BF60x
	select PINCTRL_ADI2

config PINCTRL_AT91
	bool "AT91 pinctrl driver"
	depends on OF
	depends on ARCH_AT91
	select PINMUX
	select PINCONF
	help
	  Say Y here to enable the at91 pinctrl driver

config PINCTRL_BAYTRAIL
	bool "Intel Baytrail GPIO pin control"
	depends on GPIOLIB && ACPI && X86
	select IRQ_DOMAIN
	help
	  driver for memory mapped GPIO functionality on Intel Baytrail
	  platforms. Supports 3 banks with 102, 28 and 44 gpios.
	  Most pins are usually muxed to some other functionality by firmware,
	  so only a small amount is available for gpio use.

	  Requires ACPI device enumeration code to set up a platform device.

config PINCTRL_BCM2835
	bool
	select PINMUX
	select PINCONF

config PINCTRL_IMX
	bool
	select PINMUX
	select PINCONF

config PINCTRL_IMX35
	bool "IMX35 pinctrl driver"
	depends on OF
	depends on SOC_IMX35
	select PINCTRL_IMX
	help
	  Say Y here to enable the imx35 pinctrl driver

config PINCTRL_IMX51
	bool "IMX51 pinctrl driver"
	depends on OF
	depends on SOC_IMX51
	select PINCTRL_IMX
	help
	  Say Y here to enable the imx51 pinctrl driver

config PINCTRL_IMX53
	bool "IMX53 pinctrl driver"
	depends on OF
	depends on SOC_IMX53
	select PINCTRL_IMX
	help
	  Say Y here to enable the imx53 pinctrl driver

config PINCTRL_IMX6Q
	bool "IMX6Q/DL pinctrl driver"
	depends on OF
	depends on SOC_IMX6Q
	select PINCTRL_IMX
	help
	  Say Y here to enable the imx6q/dl pinctrl driver

config PINCTRL_IMX6SL
	bool "IMX6SL pinctrl driver"
	depends on OF
	depends on SOC_IMX6SL
	select PINCTRL_IMX
	help
	  Say Y here to enable the imx6sl pinctrl driver

config PINCTRL_VF610
	bool "Freescale Vybrid VF610 pinctrl driver"
	depends on OF
	depends on SOC_VF610
	select PINCTRL_IMX
	help
	  Say Y here to enable the Freescale Vybrid VF610 pinctrl driver

config PINCTRL_LANTIQ
	bool
	depends on LANTIQ
	select PINMUX
	select PINCONF

config PINCTRL_FALCON
	bool
	depends on SOC_FALCON
	depends on PINCTRL_LANTIQ

config PINCTRL_MXS
	bool
	select PINMUX
	select PINCONF

config PINCTRL_IMX23
	bool
	select PINCTRL_MXS

config PINCTRL_IMX28
	bool
	select PINCTRL_MXS

config PINCTRL_NOMADIK
	bool "Nomadik pin controller driver"
	depends on ARCH_U8500 || ARCH_NOMADIK
	select PINMUX
	select PINCONF

config PINCTRL_STN8815
	bool "STN8815 pin controller driver"
	depends on PINCTRL_NOMADIK && ARCH_NOMADIK

config PINCTRL_DB8500
	bool "DB8500 pin controller driver"
	depends on PINCTRL_NOMADIK && ARCH_U8500

config PINCTRL_DB8540
	bool "DB8540 pin controller driver"
	depends on PINCTRL_NOMADIK && ARCH_U8500

config PINCTRL_ROCKCHIP
	bool
	select PINMUX
	select GENERIC_PINCONF
	select GENERIC_IRQ_CHIP

config PINCTRL_SINGLE
	tristate "One-register-per-pin type device tree based pinctrl driver"
	depends on OF
	select PINMUX
	select PINCONF
	select GENERIC_PINCONF
	help
	  This selects the device tree based generic pinctrl driver.

config PINCTRL_SIRF
	bool "CSR SiRFprimaII/SiRFmarco pin controller driver"
	depends on ARCH_SIRF
	select PINMUX

config PINCTRL_SUNXI
	bool
	select PINMUX
	select GENERIC_PINCONF

config PINCTRL_ST
	bool
	depends on OF
	select PINMUX
	select PINCONF

config PINCTRL_TEGRA
	bool
	select PINMUX
	select PINCONF

config PINCTRL_TEGRA20
	bool
	select PINCTRL_TEGRA

config PINCTRL_TEGRA30
	bool
	select PINCTRL_TEGRA

config PINCTRL_TEGRA114
	bool
	select PINCTRL_TEGRA

config PINCTRL_TZ1090
	bool "Toumaz Xenif TZ1090 pin control driver"
	depends on SOC_TZ1090
	select PINMUX
	select GENERIC_PINCONF

config PINCTRL_TZ1090_PDC
	bool "Toumaz Xenif TZ1090 PDC pin control driver"
	depends on SOC_TZ1090
	select PINMUX
	select PINCONF

config PINCTRL_U300
	bool "U300 pin controller driver"
	depends on ARCH_U300
	select PINMUX
	select GENERIC_PINCONF

config PINCTRL_COH901
	bool "ST-Ericsson U300 COH 901 335/571 GPIO"
	depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
	help
	  Say yes here to support GPIO interface on ST-Ericsson U300.
	  The names of the two IP block variants supported are
	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
	  ports of 8 GPIO pins each.

config PINCTRL_SAMSUNG
	bool
	select PINMUX
	select PINCONF

config PINCTRL_EXYNOS
	bool "Pinctrl driver data for Samsung EXYNOS SoCs other than 5440"
	depends on OF && GPIOLIB && (ARCH_EXYNOS || ARCH_S5PV210)
	select PINCTRL_SAMSUNG

config PINCTRL_EXYNOS5440
	bool "Samsung EXYNOS5440 SoC pinctrl driver"
	depends on SOC_EXYNOS5440
	select PINMUX
	select PINCONF

config PINCTRL_PALMAS
	bool "Pinctrl driver for the PALMAS Series MFD devices"
	depends on OF && MFD_PALMAS
	select PINMUX
	select GENERIC_PINCONF
	help
	  Palmas device supports the configuration of pins for different
	  functionality. This driver supports the pinmux, push-pull and
	  open drain configuration for the Palmas series devices like
	  TPS65913, TPS80036 etc.

config PINCTRL_S3C24XX
	bool "Samsung S3C24XX SoC pinctrl driver"
	depends on ARCH_S3C24XX
	select PINCTRL_SAMSUNG

config PINCTRL_S3C64XX
	bool "Samsung S3C64XX SoC pinctrl driver"
	depends on ARCH_S3C64XX
	select PINCTRL_SAMSUNG

source "drivers/pinctrl/mvebu/Kconfig"
source "drivers/pinctrl/sh-pfc/Kconfig"
source "drivers/pinctrl/spear/Kconfig"
source "drivers/pinctrl/vt8500/Kconfig"

config PINCTRL_XWAY
	bool
	depends on SOC_TYPE_XWAY
	depends on PINCTRL_LANTIQ

endmenu

endif
Commit	Line	Data
2744e8af LW	1	#
	2	# PINCTRL infrastructure and drivers
	3	#
	4
45f034ef LW	5	config PINCTRL
45f034ef LW	6	bool
2744e8af LW	7
	8	if PINCTRL
	9
45f034ef LW	10	menu "Pin controllers"
	11	depends on PINCTRL
	12
2744e8af	13	config PINMUX
ae6b4d85 LW	14	bool "Support pin multiplexing controllers"
	15
	16	config PINCONF
	17	bool "Support pin configuration controllers"
2744e8af	18
394349f7 LW	19	config GENERIC_PINCONF
	20	bool
	21	select PINCONF
	22
2744e8af LW	23	config DEBUG_PINCTRL
	24	bool "Debug PINCTRL calls"
	25	depends on DEBUG_KERNEL
	26	help
	27	Say Y here to add some extra checks and diagnostics to PINCTRL calls.
	28
0493e649 PC	29	config PINCTRL_ABX500
	30	bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions"
	31	depends on AB8500_CORE
	32	select GENERIC_PINCONF
	33	help
	34	Select this to enable the ABx500 family IC GPIO driver
	35
3c937993 PC	36	config PINCTRL_AB8500
	37	bool "AB8500 pin controller driver"
	38	depends on PINCTRL_ABX500 && ARCH_U8500
	39
a8f96e41 PC	40	config PINCTRL_AB8540
	41	bool "AB8540 pin controller driver"
	42	depends on PINCTRL_ABX500 && ARCH_U8500
	43
09dbec3f PC	44	config PINCTRL_AB9540
	45	bool "AB9540 pin controller driver"
	46	depends on PINCTRL_ABX500 && ARCH_U8500
	47
1aa2d8d4 PC	48	config PINCTRL_AB8505
	49	bool "AB8505 pin controller driver"
	50	depends on PINCTRL_ABX500 && ARCH_U8500
	51
e9a03add SZ	52	config PINCTRL_ADI2
e9a03add SZ	53	bool "ADI pin controller driver"
9d7278d0	54	depends on BLACKFIN
e9a03add SZ	55	select PINMUX
	56	select IRQ_DOMAIN
	57	help
	58	This is the pin controller and gpio driver for ADI BF54x, BF60x and
	59	future processors. This option is selected automatically when specific
	60	machine and arch are selected to build.
	61
c8ce8782 LD	62	config PINCTRL_AS3722
	63	bool "Pinctrl and GPIO driver for ams AS3722 PMIC"
	64	depends on MFD_AS3722 && GPIOLIB
	65	select PINMUX
	66	select GENERIC_PINCONF
	67	help
	68	AS3722 device supports the configuration of GPIO pins for different
	69	functionality. This driver supports the pinmux, push-pull and
	70	open drain configuration for the GPIO pins of AS3722 devices. It also
	71	supports the GPIO functionality through gpiolib.
	72
e9a03add SZ	73	config PINCTRL_BF54x
	74	def_bool y if BF54x
	75	select PINCTRL_ADI2
	76
	77	config PINCTRL_BF60x
	78	def_bool y if BF60x
	79	select PINCTRL_ADI2
	80
6732ae5c JCPV	81	config PINCTRL_AT91
	82	bool "AT91 pinctrl driver"
	83	depends on OF
	84	depends on ARCH_AT91
	85	select PINMUX
	86	select PINCONF
	87	help
	88	Say Y here to enable the at91 pinctrl driver
	89
a5d811bb MN	90	config PINCTRL_BAYTRAIL
	91	bool "Intel Baytrail GPIO pin control"
	92	depends on GPIOLIB && ACPI && X86
ec243320	93	select IRQ_DOMAIN
a5d811bb MN	94	help
	95	driver for memory mapped GPIO functionality on Intel Baytrail
	96	platforms. Supports 3 banks with 102, 28 and 44 gpios.
	97	Most pins are usually muxed to some other functionality by firmware,
	98	so only a small amount is available for gpio use.
	99
	100	Requires ACPI device enumeration code to set up a platform device.
	101
e1b2dc70 SA	102	config PINCTRL_BCM2835
	103	bool
	104	select PINMUX
	105	select PINCONF
	106
ae75ff81 DA	107	config PINCTRL_IMX
	108	bool
	109	select PINMUX
	110	select PINCONF
	111
b9aa8f13 UKK	112	config PINCTRL_IMX35
	113	bool "IMX35 pinctrl driver"
	114	depends on OF
	115	depends on SOC_IMX35
	116	select PINCTRL_IMX
	117	help
	118	Say Y here to enable the imx35 pinctrl driver
	119
4f6a16bf DA	120	config PINCTRL_IMX51
	121	bool "IMX51 pinctrl driver"
	122	depends on OF
	123	depends on SOC_IMX51
	124	select PINCTRL_IMX
	125	help
	126	Say Y here to enable the imx51 pinctrl driver
	127
93fbd3c0 DA	128	config PINCTRL_IMX53
	129	bool "IMX53 pinctrl driver"
	130	depends on OF
	131	depends on SOC_IMX53
	132	select PINCTRL_IMX
	133	help
	134	Say Y here to enable the imx53 pinctrl driver
	135
d8fe3572	136	config PINCTRL_IMX6Q
3f551d6a	137	bool "IMX6Q/DL pinctrl driver"
d8fe3572 DA	138	depends on OF
	139	depends on SOC_IMX6Q
	140	select PINCTRL_IMX
	141	help
3f551d6a	142	Say Y here to enable the imx6q/dl pinctrl driver
d8fe3572	143
21e59123 SG	144	config PINCTRL_IMX6SL
	145	bool "IMX6SL pinctrl driver"
	146	depends on OF
	147	depends on SOC_IMX6SL
	148	select PINCTRL_IMX
	149	help
	150	Say Y here to enable the imx6sl pinctrl driver
d8fe3572	151
78bafc66 JL	152	config PINCTRL_VF610
	153	bool "Freescale Vybrid VF610 pinctrl driver"
	154	depends on OF
	155	depends on SOC_VF610
	156	select PINCTRL_IMX
	157	help
	158	Say Y here to enable the Freescale Vybrid VF610 pinctrl driver
	159
3f8c50c9 JC	160	config PINCTRL_LANTIQ
	161	bool
	162	depends on LANTIQ
	163	select PINMUX
	164	select PINCONF
	165
e316cb2b JC	166	config PINCTRL_FALCON
	167	bool
	168	depends on SOC_FALCON
	169	depends on PINCTRL_LANTIQ
	170
17723111 SG	171	config PINCTRL_MXS
17723111 SG	172	bool
90db8a14 AL	173	select PINMUX
90db8a14 AL	174	select PINCONF
17723111 SG	175
	176	config PINCTRL_IMX23
	177	bool
17723111 SG	178	select PINCTRL_MXS
	179
	180	config PINCTRL_IMX28
	181	bool
17723111 SG	182	select PINCTRL_MXS
17723111 SG	183
e98ea774 LW	184	config PINCTRL_NOMADIK
e98ea774 LW	185	bool "Nomadik pin controller driver"
0fa7be40	186	depends on ARCH_U8500 \|\| ARCH_NOMADIK
dbfe8ca2	187	select PINMUX
d41af627	188	select PINCONF
e98ea774	189
f79c5ed9 LW	190	config PINCTRL_STN8815
	191	bool "STN8815 pin controller driver"
	192	depends on PINCTRL_NOMADIK && ARCH_NOMADIK
	193
e98ea774 LW	194	config PINCTRL_DB8500
	195	bool "DB8500 pin controller driver"
	196	depends on PINCTRL_NOMADIK && ARCH_U8500
	197
45a1b531 PC	198	config PINCTRL_DB8540
	199	bool "DB8540 pin controller driver"
	200	depends on PINCTRL_NOMADIK && ARCH_U8500
	201
d3e51161 HS	202	config PINCTRL_ROCKCHIP
	203	bool
	204	select PINMUX
	205	select GENERIC_PINCONF
	206	select GENERIC_IRQ_CHIP
	207
8b8b091b TL	208	config PINCTRL_SINGLE
	209	tristate "One-register-per-pin type device tree based pinctrl driver"
	210	depends on OF
	211	select PINMUX
	212	select PINCONF
9dddb4df	213	select GENERIC_PINCONF
8b8b091b TL	214	help
	215	This selects the device tree based generic pinctrl driver.
	216
3bece55a	217	config PINCTRL_SIRF
d3e26f2f BS	218	bool "CSR SiRFprimaII/SiRFmarco pin controller driver"
d3e26f2f BS	219	depends on ARCH_SIRF
393daa81	220	select PINMUX
393daa81	221
0e37f88d MR	222	config PINCTRL_SUNXI
	223	bool
	224	select PINMUX
	225	select GENERIC_PINCONF
	226
701016c0 SK	227	config PINCTRL_ST
	228	bool
	229	depends on OF
	230	select PINMUX
	231	select PINCONF
	232
971dac71 SW	233	config PINCTRL_TEGRA
971dac71 SW	234	bool
507ccdbf AL	235	select PINMUX
507ccdbf AL	236	select PINCONF
971dac71 SW	237
	238	config PINCTRL_TEGRA20
	239	bool
971dac71 SW	240	select PINCTRL_TEGRA
	241
	242	config PINCTRL_TEGRA30
	243	bool
971dac71 SW	244	select PINCTRL_TEGRA
971dac71 SW	245
b6ae7a26 PR	246	config PINCTRL_TEGRA114
	247	bool
	248	select PINCTRL_TEGRA
	249
d5025f9f JH	250	config PINCTRL_TZ1090
	251	bool "Toumaz Xenif TZ1090 pin control driver"
	252	depends on SOC_TZ1090
	253	select PINMUX
	254	select GENERIC_PINCONF
	255
b58f0273 JH	256	config PINCTRL_TZ1090_PDC
	257	bool "Toumaz Xenif TZ1090 PDC pin control driver"
	258	depends on SOC_TZ1090
	259	select PINMUX
	260	select PINCONF
	261
3bece55a LW	262	config PINCTRL_U300
3bece55a LW	263	bool "U300 pin controller driver"
98da3529 LW	264	depends on ARCH_U300
98da3529 LW	265	select PINMUX
dc0b1aa3	266	select GENERIC_PINCONF
45f034ef	267
ca402d37 LW	268	config PINCTRL_COH901
ca402d37 LW	269	bool "ST-Ericsson U300 COH 901 335/571 GPIO"
3c94d1bb	270	depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
ca402d37 LW	271	help
	272	Say yes here to support GPIO interface on ST-Ericsson U300.
	273	The names of the two IP block variants supported are
	274	COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
	275	ports of 8 GPIO pins each.
	276
30574f0d	277	config PINCTRL_SAMSUNG
cbc351ab	278	bool
30574f0d TA	279	select PINMUX
	280	select PINCONF
	281
a1ed2670	282	config PINCTRL_EXYNOS
83978253	283	bool "Pinctrl driver data for Samsung EXYNOS SoCs other than 5440"
608a26a7	284	depends on OF && GPIOLIB && (ARCH_EXYNOS \|\| ARCH_S5PV210)
43b169db TA	285	select PINCTRL_SAMSUNG
43b169db TA	286
f0b9a7e5 TA	287	config PINCTRL_EXYNOS5440
f0b9a7e5 TA	288	bool "Samsung EXYNOS5440 SoC pinctrl driver"
83978253	289	depends on SOC_EXYNOS5440
f0b9a7e5 TA	290	select PINMUX
	291	select PINCONF
	292
0a8d3e24	293	config PINCTRL_PALMAS
736658c5	294	bool "Pinctrl driver for the PALMAS Series MFD devices"
0a8d3e24	295	depends on OF && MFD_PALMAS
63ca8db7	296	select PINMUX
0a8d3e24 LD	297	select GENERIC_PINCONF
	298	help
	299	Palmas device supports the configuration of pins for different
	300	functionality. This driver supports the pinmux, push-pull and
	301	open drain configuration for the Palmas series devices like
	302	TPS65913, TPS80036 etc.
	303
af99a750 HS	304	config PINCTRL_S3C24XX
	305	bool "Samsung S3C24XX SoC pinctrl driver"
	306	depends on ARCH_S3C24XX
	307	select PINCTRL_SAMSUNG
	308
61dd7261 TF	309	config PINCTRL_S3C64XX
	310	bool "Samsung S3C64XX SoC pinctrl driver"
	311	depends on ARCH_S3C64XX
	312	select PINCTRL_SAMSUNG
	313
06763c74	314	source "drivers/pinctrl/mvebu/Kconfig"
6e54d8d2	315	source "drivers/pinctrl/sh-pfc/Kconfig"
deda8287	316	source "drivers/pinctrl/spear/Kconfig"
170c6152	317	source "drivers/pinctrl/vt8500/Kconfig"
deda8287	318
3f8c50c9 JC	319	config PINCTRL_XWAY
	320	bool
	321	depends on SOC_TYPE_XWAY
	322	depends on PINCTRL_LANTIQ
	323
45f034ef	324	endmenu
98da3529	325
2744e8af	326	endif