[deliverable/linux.git] / drivers / power / Kconfig

menuconfig POWER_SUPPLY
	bool "Power supply class support"
	help
	  Say Y here to enable power supply class support. This allows
	  power supply (batteries, AC, USB) monitoring by userspace
	  via sysfs and uevent (if available) and/or APM kernel interface
	  (if selected below).

if POWER_SUPPLY

config POWER_SUPPLY_DEBUG
	bool "Power supply debug"
	help
	  Say Y here to enable debugging messages for power supply class
	  and drivers.

config PDA_POWER
	tristate "Generic PDA/phone power driver"
	depends on !S390
	help
	  Say Y here to enable generic power driver for PDAs and phones with
	  one or two external power supplies (AC/USB) connected to main and
	  backup batteries, and optional builtin charger.

config APM_POWER
	tristate "APM emulation for class batteries"
	depends on APM_EMULATION
	help
	  Say Y here to enable support APM status emulation using
	  battery class devices.

config GENERIC_ADC_BATTERY
	tristate "Generic battery support using IIO"
	depends on IIO
	help
	  Say Y here to enable support for the generic battery driver
	  which uses IIO framework to read adc.

config MAX8925_POWER
	tristate "MAX8925 battery charger support"
	depends on MFD_MAX8925
	help
	  Say Y here to enable support for the battery charger in the Maxim
	  MAX8925 PMIC.

config WM831X_BACKUP
	tristate "WM831X backup battery charger support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the backup battery charger
	  in the Wolfson Microelectronics WM831x PMICs.

config WM831X_POWER
	tristate "WM831X PMU support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the power management unit
	  provided by Wolfson Microelectronics WM831x PMICs.

config WM8350_POWER
        tristate "WM8350 PMU support"
        depends on MFD_WM8350
        help
          Say Y here to enable support for the power management unit
	  provided by the Wolfson Microelectronics WM8350 PMIC.

config TEST_POWER
	tristate "Test power driver"
	help
	  This driver is used for testing. It's safe to say M here.

config BATTERY_88PM860X
	tristate "Marvell 88PM860x battery driver"
	depends on MFD_88PM860X
	help
	  Say Y here to enable battery monitor for Marvell 88PM860x chip.

config BATTERY_DS2760
	tristate "DS2760 battery driver (HP iPAQ & others)"
	depends on W1 && W1_SLAVE_DS2760
	help
	  Say Y here to enable support for batteries with ds2760 chip.

config BATTERY_DS2780
	tristate "DS2780 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2780
	help
	  Say Y here to enable support for batteries with ds2780 chip.

config BATTERY_DS2781
	tristate "DS2781 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2781
	help
	  If you enable this you will have the DS2781 battery driver support.

	  The battery monitor chip is used in many batteries/devices
	  as the one who is responsible for charging/discharging/monitoring
	  Li+ batteries.

	  If you are unsure, say N.

config BATTERY_DS2782
	tristate "DS2782/DS2786 standalone gas-gauge"
	depends on I2C
	help
	  Say Y here to enable support for the DS2782/DS2786 standalone battery
	  gas-gauge.

config BATTERY_PMU
	tristate "Apple PMU battery"
	depends on PPC32 && ADB_PMU
	help
	  Say Y here to expose battery information on Apple machines
	  through the generic battery class.

config BATTERY_OLPC
	tristate "One Laptop Per Child battery"
	depends on X86_32 && OLPC
	help
	  Say Y to enable support for the battery on the OLPC laptop.

config BATTERY_TOSA
	tristate "Sharp SL-6000 (tosa) battery"
	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-6000 (tosa) models.

config BATTERY_COLLIE
	tristate "Sharp SL-5500 (collie) battery"
	depends on SA1100_COLLIE && MCP_UCB1200
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-5500 (collie) models.

config BATTERY_IPAQ_MICRO
	tristate "iPAQ Atmel Micro ASIC battery driver"
	depends on MFD_IPAQ_MICRO
	help
	  Choose this option if you want to monitor battery status on
	  Compaq/HP iPAQ h3100 and h3600.

config BATTERY_WM97XX
	bool "WM97xx generic battery driver"
	depends on TOUCHSCREEN_WM97XX=y
	help
	  Say Y to enable support for battery measured by WM97xx aux port.

config BATTERY_SBS
        tristate "SBS Compliant gas gauge"
        depends on I2C
        help
	  Say Y to include support for SBS battery driver for SBS-compliant
	  gas gauges.

config BATTERY_BQ27XXX
	tristate "BQ27xxx battery driver"
	help
	  Say Y here to enable support for batteries with BQ27xxx (I2C/HDQ) chips.

config BATTERY_BQ27XXX_I2C
	bool "BQ27xxx I2C support"
	depends on BATTERY_BQ27XXX
	depends on I2C
	default y
	help
	  Say Y here to enable support for batteries with BQ27xxx (I2C) chips.

config BATTERY_BQ27XXX_PLATFORM
	bool "BQ27xxx HDQ support"
	depends on BATTERY_BQ27XXX
	default y
	help
	  Say Y here to enable support for batteries with BQ27xxx (HDQ) chips.

config BATTERY_DA9030
	tristate "DA9030 battery driver"
	depends on PMIC_DA903X
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9030 PMIC.

config BATTERY_DA9052
	tristate "Dialog DA9052 Battery"
	depends on PMIC_DA9052
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9052 PMIC.

config CHARGER_DA9150
	tristate "Dialog Semiconductor DA9150 Charger support"
	depends on MFD_DA9150
	depends on DA9150_GPADC
	depends on IIO
	help
	  Say Y here to enable support for charger unit of the DA9150
	  Integrated Charger & Fuel-Gauge IC.

	  This driver can also be built as a module. If so, the module will be
	  called da9150-charger.

config BATTERY_DA9150
	tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
	depends on MFD_DA9150
	help
	  Say Y here to enable support for the Fuel-Gauge unit of the DA9150
	  Integrated Charger & Fuel-Gauge IC

	  This driver can also be built as a module. If so, the module will be
	  called da9150-fg.

config AXP288_CHARGER
	tristate "X-Powers AXP288 Charger"
	depends on MFD_AXP20X && EXTCON_AXP288
	help
	  Say yes here to have support X-Power AXP288 power management IC (PMIC)
	  integrated charger.

config AXP288_FUEL_GAUGE
	tristate "X-Powers AXP288 Fuel Gauge"
	depends on MFD_AXP20X && IIO
	help
	  Say yes here to have support for X-Power power management IC (PMIC)
	  Fuel Gauge. The device provides battery statistics and status
	  monitoring as well as alerts for battery over/under voltage and
	  over/under temperature.

config BATTERY_MAX17040
	tristate "Maxim MAX17040 Fuel Gauge"
	depends on I2C
	help
	  MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17040 is configured
	  to operate with a single lithium cell

config BATTERY_MAX17042
	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
	depends on I2C
	select REGMAP_I2C
	help
	  MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17042 is configured
	  to operate with a single lithium cell. MAX8997 and MAX8966 are
	  multi-function devices that include fuel gauages that are compatible
	  with MAX17042. This driver also supports max17047/50 chips which are
	  improved version of max17042.

config BATTERY_Z2
	tristate "Z2 battery driver"
	depends on I2C && MACH_ZIPIT2
	help
	  Say Y to include support for the battery on the Zipit Z2.

config BATTERY_S3C_ADC
	tristate "Battery driver for Samsung ADC based monitoring"
	depends on S3C_ADC
	help
	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery

config BATTERY_TWL4030_MADC
	tristate "TWL4030 MADC battery driver"
	depends on TWL4030_MADC
	help
	  Say Y here to enable this dumb driver for batteries managed
	  through the TWL4030 MADC.

config CHARGER_88PM860X
	tristate "Marvell 88PM860x Charger driver"
	depends on MFD_88PM860X && BATTERY_88PM860X
	help
	  Say Y here to enable charger for Marvell 88PM860x chip.

config CHARGER_PCF50633
	tristate "NXP PCF50633 MBC"
	depends on MFD_PCF50633
	help
	 Say Y to include support for NXP PCF50633 Main Battery Charger.

config BATTERY_JZ4740
	tristate "Ingenic JZ4740 battery"
	depends on MACH_JZ4740
	depends on MFD_JZ4740_ADC
	help
	  Say Y to enable support for the battery on Ingenic JZ4740 based
	  boards.

	  This driver can be build as a module. If so, the module will be
	  called jz4740-battery.

config BATTERY_INTEL_MID
	tristate "Battery driver for Intel MID platforms"
	depends on INTEL_SCU_IPC && SPI
	help
	  Say Y here to enable the battery driver on Intel MID
	  platforms.

config BATTERY_RX51
	tristate "Nokia RX-51 (N900) battery driver"
	depends on TWL4030_MADC
	help
	  Say Y here to enable support for battery information on Nokia
	  RX-51, also known as N900 tablet.

config CHARGER_ISP1704
	tristate "ISP1704 USB Charger Detection"
	depends on USB_PHY
	help
	  Say Y to enable support for USB Charger Detection with
	  ISP1707/ISP1704 USB transceivers.

config CHARGER_MAX8903
	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
	help
	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
	  The driver supports controlling charger-enable and current-limit
	  pins based on the status of charger connections with interrupt
	  handlers.

config CHARGER_TWL4030
	tristate "OMAP TWL4030 BCI charger driver"
	depends on IIO && TWL4030_CORE
	help
	  Say Y here to enable support for TWL4030 Battery Charge Interface.

config CHARGER_LP8727
	tristate "TI/National Semiconductor LP8727 charger driver"
	depends on I2C
	help
	  Say Y here to enable support for LP8727 Charger Driver.

config CHARGER_LP8788
	tristate "TI LP8788 charger driver"
	depends on MFD_LP8788
	depends on LP8788_ADC
	depends on IIO
	help
	  Say Y to enable support for the LP8788 linear charger.

config CHARGER_GPIO
	tristate "GPIO charger"
	depends on GPIOLIB || COMPILE_TEST
	help
	  Say Y to include support for chargers which report their online status
	  through a GPIO pin.

	  This driver can be build as a module. If so, the module will be
	  called gpio-charger.

config CHARGER_MANAGER
	bool "Battery charger manager for multiple chargers"
	depends on REGULATOR
	select EXTCON
	help
          Say Y to enable charger-manager support, which allows multiple
          chargers attached to a battery and multiple batteries attached to a
          system. The charger-manager also can monitor charging status in
          runtime and in suspend-to-RAM by waking up the system periodically
          with help of suspend_again support.

config CHARGER_MAX14577
	tristate "Maxim MAX14577/77836 battery charger driver"
	depends on MFD_MAX14577
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX14577/77836 MUICs.

config CHARGER_MAX77693
	tristate "Maxim MAX77693 battery charger driver"
	depends on MFD_MAX77693
	help
	  Say Y to enable support for the Maxim MAX77693 battery charger.

config CHARGER_MAX8997
	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
	depends on MFD_MAX8997 && REGULATOR_MAX8997
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8997/LP3974 PMICs.

config CHARGER_MAX8998
	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
	depends on MFD_MAX8998 && REGULATOR_MAX8998
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8998/LP3974 PMICs.

config CHARGER_QCOM_SMBB
	tristate "Qualcomm Switch-Mode Battery Charger and Boost"
	depends on MFD_SPMI_PMIC || COMPILE_TEST
	depends on OF
	help
	  Say Y to include support for the Switch-Mode Battery Charger and
	  Boost (SMBB) hardware found in Qualcomm PM8941 PMICs.  The charger
	  is an integrated, single-cell lithium-ion battery charger.  DT
	  configuration is required for loading, see the devicetree
	  documentation for more detail.  The base name for this driver is
	  'pm8941_charger'.

config CHARGER_BQ2415X
	tristate "TI BQ2415x battery charger driver"
	depends on I2C
	help
	  Say Y to enable support for the TI BQ2415x battery charger
	  PMICs.

	  You'll need this driver to charge batteries on e.g. Nokia
	  RX-51/N900.

config CHARGER_BQ24190
	tristate "TI BQ24190 battery charger driver"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	help
	  Say Y to enable support for the TI BQ24190 battery charger.

config CHARGER_BQ24257
	tristate "TI BQ24250/24251/24257 battery charger driver"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	depends on REGMAP_I2C
	help
	  Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
	  chargers.

config CHARGER_BQ24735
	tristate "TI BQ24735 battery charger support"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	help
	  Say Y to enable support for the TI BQ24735 battery charger.

config CHARGER_BQ25890
	tristate "TI BQ25890 battery charger driver"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	select REGMAP_I2C
	help
	  Say Y to enable support for the TI BQ25890 battery charger.

config CHARGER_SMB347
	tristate "Summit Microelectronics SMB347 Battery Charger"
	depends on I2C
	select REGMAP_I2C
	help
	  Say Y to include support for Summit Microelectronics SMB347
	  Battery Charger.

config CHARGER_TPS65090
	tristate "TPS65090 battery charger driver"
	depends on MFD_TPS65090
	help
	 Say Y here to enable support for battery charging with TPS65090
	 PMIC chips.

config CHARGER_TPS65217
	tristate "TPS65217 battery charger driver"
	depends on MFD_TPS65217
	help
	 Say Y here to enable support for battery charging with TPS65217
	 PMIC chips.

config BATTERY_GAUGE_LTC2941
	tristate "LTC2941/LTC2943 Battery Gauge Driver"
	depends on I2C
	help
	  Say Y here to include support for LTC2941 and LTC2943 Battery
	  Gauge IC. The driver reports the charge count continuously, and
	  measures the voltage and temperature every 10 seconds.

config AB8500_BM
	bool "AB8500 Battery Management Driver"
	depends on AB8500_CORE && AB8500_GPADC
	help
	  Say Y to include support for AB8500 battery management.

config BATTERY_GOLDFISH
	tristate "Goldfish battery driver"
	depends on GOLDFISH || COMPILE_TEST
	depends on HAS_IOMEM
	help
	  Say Y to enable support for the battery and AC power in the
	  Goldfish emulator.

config BATTERY_RT5033
	tristate "RT5033 fuel gauge support"
	depends on MFD_RT5033
	help
	  This adds support for battery fuel gauge in Richtek RT5033 PMIC.
	  The fuelgauge calculates and determines the battery state of charge
	  according to battery open circuit voltage.

config CHARGER_RT9455
	tristate "Richtek RT9455 battery charger driver"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	select REGMAP_I2C
	help
	  Say Y to enable support for Richtek RT9455 battery charger.

config AXP20X_POWER
	tristate "AXP20x power supply driver"
	depends on MFD_AXP20X
	help
	  This driver provides support for the power supply features of
	  AXP20x PMIC.

source "drivers/power/reset/Kconfig"

endif # POWER_SUPPLY

source "drivers/power/avs/Kconfig"
Commit	Line	Data
4a11b59d	1	menuconfig POWER_SUPPLY
0d4ed4e2	2	bool "Power supply class support"
4a11b59d AV	3	help
	4	Say Y here to enable power supply class support. This allows
	5	power supply (batteries, AC, USB) monitoring by userspace
	6	via sysfs and uevent (if available) and/or APM kernel interface
	7	(if selected below).
	8
	9	if POWER_SUPPLY
	10
	11	config POWER_SUPPLY_DEBUG
	12	bool "Power supply debug"
	13	help
	14	Say Y here to enable debugging messages for power supply class
	15	and drivers.
	16
b2998049 AV	17	config PDA_POWER
b2998049 AV	18	tristate "Generic PDA/phone power driver"
5f17c70f	19	depends on !S390
b2998049 AV	20	help
	21	Say Y here to enable generic power driver for PDAs and phones with
	22	one or two external power supplies (AC/USB) connected to main and
	23	backup batteries, and optional builtin charger.
	24
3788ec93 AV	25	config APM_POWER
	26	tristate "APM emulation for class batteries"
	27	depends on APM_EMULATION
	28	help
	29	Say Y here to enable support APM status emulation using
	30	battery class devices.
	31
e60fea79	32	config GENERIC_ADC_BATTERY
	33	tristate "Generic battery support using IIO"
	34	depends on IIO
	35	help
	36	Say Y here to enable support for the generic battery driver
	37	which uses IIO framework to read adc.
	38
28db3888 HZ	39	config MAX8925_POWER
	40	tristate "MAX8925 battery charger support"
	41	depends on MFD_MAX8925
	42	help
	43	Say Y here to enable support for the battery charger in the Maxim
	44	MAX8925 PMIC.
	45
c26964ea MB	46	config WM831X_BACKUP
	47	tristate "WM831X backup battery charger support"
	48	depends on MFD_WM831X
	49	help
	50	Say Y here to enable support for the backup battery charger
	51	in the Wolfson Microelectronics WM831x PMICs.
	52
3961f7c3 MB	53	config WM831X_POWER
	54	tristate "WM831X PMU support"
	55	depends on MFD_WM831X
	56	help
	57	Say Y here to enable support for the power management unit
	58	provided by Wolfson Microelectronics WM831x PMICs.
	59
14431aa0 MB	60	config WM8350_POWER
	61	tristate "WM8350 PMU support"
	62	depends on MFD_WM8350
	63	help
	64	Say Y here to enable support for the power management unit
	65	provided by the Wolfson Microelectronics WM8350 PMIC.
	66
a1e50fd4 AV	67	config TEST_POWER
	68	tristate "Test power driver"
	69	help
	70	This driver is used for testing. It's safe to say M here.
	71
a830d28b JZ	72	config BATTERY_88PM860X
	73	tristate "Marvell 88PM860x battery driver"
	74	depends on MFD_88PM860X
	75	help
	76	Say Y here to enable battery monitor for Marvell 88PM860x chip.
	77
fe0e3153 AV	78	config BATTERY_DS2760
fe0e3153 AV	79	tristate "DS2760 battery driver (HP iPAQ & others)"
f6127b86	80	depends on W1 && W1_SLAVE_DS2760
fe0e3153 AV	81	help
	82	Say Y here to enable support for batteries with ds2760 chip.
	83
275ac746 CB	84	config BATTERY_DS2780
275ac746 CB	85	tristate "DS2780 battery driver"
3369465e	86	depends on HAS_IOMEM
275ac746 CB	87	select W1
	88	select W1_SLAVE_DS2780
	89	help
	90	Say Y here to enable support for batteries with ds2780 chip.
	91
fef37e9a	92	config BATTERY_DS2781
840b91bd	93	tristate "DS2781 battery driver"
fef37e9a RS	94	depends on HAS_IOMEM
	95	select W1
	96	select W1_SLAVE_DS2781
	97	help
	98	If you enable this you will have the DS2781 battery driver support.
	99
	100	The battery monitor chip is used in many batteries/devices
	101	as the one who is responsible for charging/discharging/monitoring
	102	Li+ batteries.
	103
	104	If you are unsure, say N.
	105
bfdb46ce	106	config BATTERY_DS2782
9b9ade6b	107	tristate "DS2782/DS2786 standalone gas-gauge"
bfdb46ce RM	108	depends on I2C
bfdb46ce RM	109	help
9b9ade6b	110	Say Y here to enable support for the DS2782/DS2786 standalone battery
bfdb46ce RM	111	gas-gauge.
bfdb46ce RM	112
efea58e3 DW	113	config BATTERY_PMU
efea58e3 DW	114	tristate "Apple PMU battery"
a1da5f4f	115	depends on PPC32 && ADB_PMU
efea58e3 DW	116	help
	117	Say Y here to expose battery information on Apple machines
	118	through the generic battery class.
	119
fb972873 DW	120	config BATTERY_OLPC
	121	tristate "One Laptop Per Child battery"
	122	depends on X86_32 && OLPC
	123	help
	124	Say Y to enable support for the battery on the OLPC laptop.
	125
fece4184 DB	126	config BATTERY_TOSA
fece4184 DB	127	tristate "Sharp SL-6000 (tosa) battery"
6a903788	128	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
fece4184 DB	129	help
	130	Say Y to enable support for the battery on the Sharp Zaurus
	131	SL-6000 (tosa) models.
	132
f1fce597 TK	133	config BATTERY_COLLIE
	134	tristate "Sharp SL-5500 (collie) battery"
	135	depends on SA1100_COLLIE && MCP_UCB1200
	136	help
	137	Say Y to enable support for the battery on the Sharp Zaurus
	138	SL-5500 (collie) models.
	139
00a588f9 DA	140	config BATTERY_IPAQ_MICRO
	141	tristate "iPAQ Atmel Micro ASIC battery driver"
	142	depends on MFD_IPAQ_MICRO
	143	help
	144	Choose this option if you want to monitor battery status on
	145	Compaq/HP iPAQ h3100 and h3600.
	146
4e9687d9 MV	147	config BATTERY_WM97XX
4e9687d9 MV	148	bool "WM97xx generic battery driver"
5e4c5f4c	149	depends on TOUCHSCREEN_WM97XX=y
d4b19c42	150	help
4e9687d9	151	Say Y to enable support for battery measured by WM97xx aux port.
d4b19c42	152
c78f2b64 RK	153	config BATTERY_SBS
c78f2b64 RK	154	tristate "SBS Compliant gas gauge"
a7640bfa RK	155	depends on I2C
a7640bfa RK	156	help
c78f2b64 RK	157	Say Y to include support for SBS battery driver for SBS-compliant
c78f2b64 RK	158	gas gauges.
a7640bfa	159
081bab21 AD	160	config BATTERY_BQ27XXX
081bab21 AD	161	tristate "BQ27xxx battery driver"
7fb7ba58	162	help
081bab21	163	Say Y here to enable support for batteries with BQ27xxx (I2C/HDQ) chips.
7fb7ba58	164
081bab21 AD	165	config BATTERY_BQ27XXX_I2C
	166	bool "BQ27xxx I2C support"
	167	depends on BATTERY_BQ27XXX
b996ad0e	168	depends on I2C
7fb7ba58	169	default y
b996ad0e	170	help
081bab21	171	Say Y here to enable support for batteries with BQ27xxx (I2C) chips.
b996ad0e	172
081bab21 AD	173	config BATTERY_BQ27XXX_PLATFORM
	174	bool "BQ27xxx HDQ support"
	175	depends on BATTERY_BQ27XXX
7fb7ba58 LPC	176	default y
7fb7ba58 LPC	177	help
081bab21	178	Say Y here to enable support for batteries with BQ27xxx (HDQ) chips.
7fb7ba58	179
342d765e MR	180	config BATTERY_DA9030
	181	tristate "DA9030 battery driver"
	182	depends on PMIC_DA903X
	183	help
	184	Say Y here to enable support for batteries charger integrated into
	185	DA9030 PMIC.
	186
ded7fc7b AJ	187	config BATTERY_DA9052
	188	tristate "Dialog DA9052 Battery"
	189	depends on PMIC_DA9052
	190	help
	191	Say Y here to enable support for batteries charger integrated into
	192	DA9052 PMIC.
	193
c1a281e3 AT	194	config CHARGER_DA9150
	195	tristate "Dialog Semiconductor DA9150 Charger support"
	196	depends on MFD_DA9150
	197	depends on DA9150_GPADC
	198	depends on IIO
	199	help
	200	Say Y here to enable support for charger unit of the DA9150
	201	Integrated Charger & Fuel-Gauge IC.
	202
	203	This driver can also be built as a module. If so, the module will be
	204	called da9150-charger.
	205
a419b4fd AT	206	config BATTERY_DA9150
	207	tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
	208	depends on MFD_DA9150
	209	help
	210	Say Y here to enable support for the Fuel-Gauge unit of the DA9150
	211	Integrated Charger & Fuel-Gauge IC
	212
	213	This driver can also be built as a module. If so, the module will be
	214	called da9150-fg.
	215
843735b7 RP	216	config AXP288_CHARGER
	217	tristate "X-Powers AXP288 Charger"
	218	depends on MFD_AXP20X && EXTCON_AXP288
	219	help
	220	Say yes here to have support X-Power AXP288 power management IC (PMIC)
	221	integrated charger.
	222
5a5bf490 TB	223	config AXP288_FUEL_GAUGE
	224	tristate "X-Powers AXP288 Fuel Gauge"
	225	depends on MFD_AXP20X && IIO
	226	help
	227	Say yes here to have support for X-Power power management IC (PMIC)
	228	Fuel Gauge. The device provides battery statistics and status
	229	monitoring as well as alerts for battery over/under voltage and
	230	over/under temperature.
	231
c6f4a42d MK	232	config BATTERY_MAX17040
	233	tristate "Maxim MAX17040 Fuel Gauge"
	234	depends on I2C
	235	help
	236	MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
	237	in handheld and portable equipment. The MAX17040 is configured
	238	to operate with a single lithium cell
	239
359ab9f5	240	config BATTERY_MAX17042
9a8422d2	241	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
359ab9f5	242	depends on I2C
93353e80	243	select REGMAP_I2C
359ab9f5 MH	244	help
	245	MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
	246	in handheld and portable equipment. The MAX17042 is configured
	247	to operate with a single lithium cell. MAX8997 and MAX8966 are
	248	multi-function devices that include fuel gauages that are compatible
9a8422d2 RP	249	with MAX17042. This driver also supports max17047/50 chips which are
9a8422d2 RP	250	improved version of max17042.
359ab9f5	251
e3e8d1c9 MV	252	config BATTERY_Z2
	253	tristate "Z2 battery driver"
	254	depends on I2C && MACH_ZIPIT2
	255	help
	256	Say Y to include support for the battery on the Zipit Z2.
	257
808be4b2 VK	258	config BATTERY_S3C_ADC
	259	tristate "Battery driver for Samsung ADC based monitoring"
	260	depends on S3C_ADC
	261	help
	262	Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
	263
da0a00eb MB	264	config BATTERY_TWL4030_MADC
	265	tristate "TWL4030 MADC battery driver"
	266	depends on TWL4030_MADC
	267	help
	268	Say Y here to enable this dumb driver for batteries managed
	269	through the TWL4030 MADC.
	270
a830d28b JZ	271	config CHARGER_88PM860X
	272	tristate "Marvell 88PM860x Charger driver"
	273	depends on MFD_88PM860X && BATTERY_88PM860X
	274	help
	275	Say Y here to enable charger for Marvell 88PM860x chip.
	276
f5714dc9 BR	277	config CHARGER_PCF50633
	278	tristate "NXP PCF50633 MBC"
	279	depends on MFD_PCF50633
	280	help
	281	Say Y to include support for NXP PCF50633 Main Battery Charger.
	282
f6a21388 LPC	283	config BATTERY_JZ4740
	284	tristate "Ingenic JZ4740 battery"
	285	depends on MACH_JZ4740
	286	depends on MFD_JZ4740_ADC
	287	help
	288	Say Y to enable support for the battery on Ingenic JZ4740 based
	289	boards.
	290
	291	This driver can be build as a module. If so, the module will be
	292	called jz4740-battery.
	293
6721081b NM	294	config BATTERY_INTEL_MID
	295	tristate "Battery driver for Intel MID platforms"
	296	depends on INTEL_SCU_IPC && SPI
	297	help
	298	Say Y here to enable the battery driver on Intel MID
	299	platforms.
	300
04930baf PR	301	config BATTERY_RX51
	302	tristate "Nokia RX-51 (N900) battery driver"
	303	depends on TWL4030_MADC
	304	help
	305	Say Y here to enable support for battery information on Nokia
	306	RX-51, also known as N900 tablet.
	307
ec46475f HK	308	config CHARGER_ISP1704
ec46475f HK	309	tristate "ISP1704 USB Charger Detection"
fd891498	310	depends on USB_PHY
ec46475f HK	311	help
	312	Say Y to enable support for USB Charger Detection with
	313	ISP1707/ISP1704 USB transceivers.
	314
b14a9ccc MH	315	config CHARGER_MAX8903
	316	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
	317	help
	318	Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
	319	The driver supports controlling charger-enable and current-limit
	320	pins based on the status of charger connections with interrupt
	321	handlers.
	322
2e727f17 GI	323	config CHARGER_TWL4030
2e727f17 GI	324	tristate "OMAP TWL4030 BCI charger driver"
0f4998cb	325	depends on IIO && TWL4030_CORE
2e727f17 GI	326	help
	327	Say Y here to enable support for TWL4030 Battery Charge Interface.
	328
2165c8a4	329	config CHARGER_LP8727
e39b828f	330	tristate "TI/National Semiconductor LP8727 charger driver"
2165c8a4 WK	331	depends on I2C
	332	help
	333	Say Y here to enable support for LP8727 Charger Driver.
	334
98a27664 KM	335	config CHARGER_LP8788
	336	tristate "TI LP8788 charger driver"
	337	depends on MFD_LP8788
	338	depends on LP8788_ADC
237a1b01	339	depends on IIO
98a27664 KM	340	help
	341	Say Y to enable support for the LP8788 linear charger.
	342
5070437c LPC	343	config CHARGER_GPIO
5070437c LPC	344	tristate "GPIO charger"
1e8b82c1	345	depends on GPIOLIB \|\| COMPILE_TEST
5070437c LPC	346	help
	347	Say Y to include support for chargers which report their online status
	348	through a GPIO pin.
	349
	350	This driver can be build as a module. If so, the module will be
	351	called gpio-charger.
	352
3bb3dbbd DK	353	config CHARGER_MANAGER
3bb3dbbd DK	354	bool "Battery charger manager for multiple chargers"
c1155c64	355	depends on REGULATOR
c4727555	356	select EXTCON
3bb3dbbd DK	357	help
	358	Say Y to enable charger-manager support, which allows multiple
	359	chargers attached to a battery and multiple batteries attached to a
	360	system. The charger-manager also can monitor charging status in
	361	runtime and in suspend-to-RAM by waking up the system periodically
	362	with help of suspend_again support.
	363
55e64701	364	config CHARGER_MAX14577
3682a8ee	365	tristate "Maxim MAX14577/77836 battery charger driver"
55e64701 KK	366	depends on MFD_MAX14577
	367	help
	368	Say Y to enable support for the battery charger control sysfs and
3682a8ee	369	platform data of MAX14577/77836 MUICs.
55e64701	370
87c2d906 KK	371	config CHARGER_MAX77693
	372	tristate "Maxim MAX77693 battery charger driver"
	373	depends on MFD_MAX77693
	374	help
	375	Say Y to enable support for the Maxim MAX77693 battery charger.
	376
149c077b DK	377	config CHARGER_MAX8997
	378	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
	379	depends on MFD_MAX8997 && REGULATOR_MAX8997
	380	help
	381	Say Y to enable support for the battery charger control sysfs and
	382	platform data of MAX8997/LP3974 PMICs.
	383
bb4ce970 DK	384	config CHARGER_MAX8998
	385	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
	386	depends on MFD_MAX8998 && REGULATOR_MAX8998
	387	help
	388	Say Y to enable support for the battery charger control sysfs and
	389	platform data of MAX8998/LP3974 PMICs.
	390
56d7df87 CC	391	config CHARGER_QCOM_SMBB
	392	tristate "Qualcomm Switch-Mode Battery Charger and Boost"
	393	depends on MFD_SPMI_PMIC \|\| COMPILE_TEST
	394	depends on OF
	395	help
	396	Say Y to include support for the Switch-Mode Battery Charger and
	397	Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger
	398	is an integrated, single-cell lithium-ion battery charger. DT
	399	configuration is required for loading, see the devicetree
	400	documentation for more detail. The base name for this driver is
	401	'pm8941_charger'.
	402
7ad85830 AV	403	config CHARGER_BQ2415X
	404	tristate "TI BQ2415x battery charger driver"
	405	depends on I2C
	406	help
	407	Say Y to enable support for the TI BQ2415x battery charger
	408	PMICs.
	409
	410	You'll need this driver to charge batteries on e.g. Nokia
	411	RX-51/N900.
	412
d7bf353f MG	413	config CHARGER_BQ24190
d7bf353f MG	414	tristate "TI BQ24190 battery charger driver"
1e8b82c1 GU	415	depends on I2C
1e8b82c1 GU	416	depends on GPIOLIB \|\| COMPILE_TEST
d7bf353f MG	417	help
	418	Say Y to enable support for the TI BQ24190 battery charger.
	419
2219a935	420	config CHARGER_BQ24257
bf02dca9	421	tristate "TI BQ24250/24251/24257 battery charger driver"
1e8b82c1 GU	422	depends on I2C
1e8b82c1 GU	423	depends on GPIOLIB \|\| COMPILE_TEST
2219a935 LP	424	depends on REGMAP_I2C
2219a935 LP	425	help
bf02dca9 AD	426	Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
bf02dca9 AD	427	chargers.
2219a935	428
ce773992 DS	429	config CHARGER_BQ24735
ce773992 DS	430	tristate "TI BQ24735 battery charger support"
1e8b82c1 GU	431	depends on I2C
1e8b82c1 GU	432	depends on GPIOLIB \|\| COMPILE_TEST
ce773992 DS	433	help
	434	Say Y to enable support for the TI BQ24735 battery charger.
	435
4aeae9cb LP	436	config CHARGER_BQ25890
4aeae9cb LP	437	tristate "TI BQ25890 battery charger driver"
1e8b82c1 GU	438	depends on I2C
1e8b82c1 GU	439	depends on GPIOLIB \|\| COMPILE_TEST
4aeae9cb LP	440	select REGMAP_I2C
	441	help
	442	Say Y to enable support for the TI BQ25890 battery charger.
	443
ed1a230f BR	444	config CHARGER_SMB347
	445	tristate "Summit Microelectronics SMB347 Battery Charger"
	446	depends on I2C
34298d40	447	select REGMAP_I2C
ed1a230f BR	448	help
	449	Say Y to include support for Summit Microelectronics SMB347
	450	Battery Charger.
	451
6f8da5df RK	452	config CHARGER_TPS65090
	453	tristate "TPS65090 battery charger driver"
	454	depends on MFD_TPS65090
	455	help
	456	Say Y here to enable support for battery charging with TPS65090
	457	PMIC chips.
	458
3636859b EBS	459	config CHARGER_TPS65217
	460	tristate "TPS65217 battery charger driver"
	461	depends on MFD_TPS65217
	462	help
	463	Say Y here to enable support for battery charging with TPS65217
	464	PMIC chips.
	465
085bc24d ML	466	config BATTERY_GAUGE_LTC2941
	467	tristate "LTC2941/LTC2943 Battery Gauge Driver"
	468	depends on I2C
	469	help
	470	Say Y here to include support for LTC2941 and LTC2943 Battery
	471	Gauge IC. The driver reports the charge count continuously, and
	472	measures the voltage and temperature every 10 seconds.
	473
1f855824 AM	474	config AB8500_BM
	475	bool "AB8500 Battery Management Driver"
	476	depends on AB8500_CORE && AB8500_GPADC
	477	help
8b7d133c	478	Say Y to include support for AB8500 battery management.
1f855824	479
84d7b768 ML	480	config BATTERY_GOLDFISH
84d7b768 ML	481	tristate "Goldfish battery driver"
0244ad00	482	depends on GOLDFISH \|\| COMPILE_TEST
850bc4d5	483	depends on HAS_IOMEM
84d7b768 ML	484	help
	485	Say Y to enable support for the battery and AC power in the
	486	Goldfish emulator.
	487
b847dd96 BS	488	config BATTERY_RT5033
	489	tristate "RT5033 fuel gauge support"
	490	depends on MFD_RT5033
	491	help
	492	This adds support for battery fuel gauge in Richtek RT5033 PMIC.
	493	The fuelgauge calculates and determines the battery state of charge
	494	according to battery open circuit voltage.
	495
e86d69dd AMN	496	config CHARGER_RT9455
e86d69dd AMN	497	tristate "Richtek RT9455 battery charger driver"
1e8b82c1 GU	498	depends on I2C
1e8b82c1 GU	499	depends on GPIOLIB \|\| COMPILE_TEST
e86d69dd AMN	500	select REGMAP_I2C
	501	help
	502	Say Y to enable support for Richtek RT9455 battery charger.
	503
69fb4dca HG	504	config AXP20X_POWER
	505	tristate "AXP20x power supply driver"
	506	depends on MFD_AXP20X
	507	help
	508	This driver provides support for the power supply features of
	509	AXP20x PMIC.
	510
96ff0f5c JL	511	source "drivers/power/reset/Kconfig"
96ff0f5c JL	512
4a11b59d	513	endif # POWER_SUPPLY
21ff63ad JP	514
21ff63ad JP	515	source "drivers/power/avs/Kconfig"