[deliverable/linux.git] / drivers / power / Kconfig

menuconfig POWER_SUPPLY
	bool "Power supply class support"
	help
	  Say Y here to enable power supply class support. This allows
	  power supply (batteries, AC, USB) monitoring by userspace
	  via sysfs and uevent (if available) and/or APM kernel interface
	  (if selected below).

if POWER_SUPPLY

config POWER_SUPPLY_DEBUG
	bool "Power supply debug"
	help
	  Say Y here to enable debugging messages for power supply class
	  and drivers.

config PDA_POWER
	tristate "Generic PDA/phone power driver"
	depends on !S390
	help
	  Say Y here to enable generic power driver for PDAs and phones with
	  one or two external power supplies (AC/USB) connected to main and
	  backup batteries, and optional builtin charger.

config APM_POWER
	tristate "APM emulation for class batteries"
	depends on APM_EMULATION
	help
	  Say Y here to enable support APM status emulation using
	  battery class devices.

config GENERIC_ADC_BATTERY
	tristate "Generic battery support using IIO"
	depends on IIO
	help
	  Say Y here to enable support for the generic battery driver
	  which uses IIO framework to read adc.

config MAX8925_POWER
	tristate "MAX8925 battery charger support"
	depends on MFD_MAX8925
	help
	  Say Y here to enable support for the battery charger in the Maxim
	  MAX8925 PMIC.

config WM831X_BACKUP
	tristate "WM831X backup battery charger support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the backup battery charger
	  in the Wolfson Microelectronics WM831x PMICs.

config WM831X_POWER
	tristate "WM831X PMU support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the power management unit
	  provided by Wolfson Microelectronics WM831x PMICs.

config WM8350_POWER
        tristate "WM8350 PMU support"
        depends on MFD_WM8350
        help
          Say Y here to enable support for the power management unit
	  provided by the Wolfson Microelectronics WM8350 PMIC.

config TEST_POWER
	tristate "Test power driver"
	help
	  This driver is used for testing. It's safe to say M here.

config BATTERY_88PM860X
	tristate "Marvell 88PM860x battery driver"
	depends on MFD_88PM860X
	help
	  Say Y here to enable battery monitor for Marvell 88PM860x chip.

config BATTERY_DS2760
	tristate "DS2760 battery driver (HP iPAQ & others)"
	depends on W1 && W1_SLAVE_DS2760
	help
	  Say Y here to enable support for batteries with ds2760 chip.

config BATTERY_DS2780
	tristate "DS2780 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2780
	help
	  Say Y here to enable support for batteries with ds2780 chip.

config BATTERY_DS2781
	tristate "DS2781 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2781
	help
	  If you enable this you will have the DS2781 battery driver support.

	  The battery monitor chip is used in many batteries/devices
	  as the one who is responsible for charging/discharging/monitoring
	  Li+ batteries.

	  If you are unsure, say N.

config BATTERY_DS2782
	tristate "DS2782/DS2786 standalone gas-gauge"
	depends on I2C
	help
	  Say Y here to enable support for the DS2782/DS2786 standalone battery
	  gas-gauge.

config BATTERY_PMU
	tristate "Apple PMU battery"
	depends on PPC32 && ADB_PMU
	help
	  Say Y here to expose battery information on Apple machines
	  through the generic battery class.

config BATTERY_OLPC
	tristate "One Laptop Per Child battery"
	depends on X86_32 && OLPC
	help
	  Say Y to enable support for the battery on the OLPC laptop.

config BATTERY_TOSA
	tristate "Sharp SL-6000 (tosa) battery"
	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-6000 (tosa) models.

config BATTERY_COLLIE
	tristate "Sharp SL-5500 (collie) battery"
	depends on SA1100_COLLIE && MCP_UCB1200
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-5500 (collie) models.

config BATTERY_IPAQ_MICRO
	tristate "iPAQ Atmel Micro ASIC battery driver"
	depends on MFD_IPAQ_MICRO
	help
	  Choose this option if you want to monitor battery status on
	  Compaq/HP iPAQ h3100 and h3600.

config BATTERY_WM97XX
	bool "WM97xx generic battery driver"
	depends on TOUCHSCREEN_WM97XX=y
	help
	  Say Y to enable support for battery measured by WM97xx aux port.

config BATTERY_SBS
        tristate "SBS Compliant gas gauge"
        depends on I2C
        help
	  Say Y to include support for SBS battery driver for SBS-compliant
	  gas gauges.

config BATTERY_BQ27XXX
	tristate "BQ27xxx battery driver"
	help
	  Say Y here to enable support for batteries with BQ27xxx chips.

config BATTERY_BQ27XXX_I2C
	tristate "BQ27xxx I2C support"
	depends on BATTERY_BQ27XXX
	depends on I2C
	default y
	help
	  Say Y here to enable support for batteries with BQ27xxx chips
	  connected over an I2C bus.

config BATTERY_DA9030
	tristate "DA9030 battery driver"
	depends on PMIC_DA903X
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9030 PMIC.

config BATTERY_DA9052
	tristate "Dialog DA9052 Battery"
	depends on PMIC_DA9052
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9052 PMIC.

config CHARGER_DA9150
	tristate "Dialog Semiconductor DA9150 Charger support"
	depends on MFD_DA9150
	depends on DA9150_GPADC
	depends on IIO
	help
	  Say Y here to enable support for charger unit of the DA9150
	  Integrated Charger & Fuel-Gauge IC.

	  This driver can also be built as a module. If so, the module will be
	  called da9150-charger.

config BATTERY_DA9150
	tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
	depends on MFD_DA9150
	help
	  Say Y here to enable support for the Fuel-Gauge unit of the DA9150
	  Integrated Charger & Fuel-Gauge IC

	  This driver can also be built as a module. If so, the module will be
	  called da9150-fg.

config AXP288_CHARGER
	tristate "X-Powers AXP288 Charger"
	depends on MFD_AXP20X && EXTCON_AXP288
	help
	  Say yes here to have support X-Power AXP288 power management IC (PMIC)
	  integrated charger.

config AXP288_FUEL_GAUGE
	tristate "X-Powers AXP288 Fuel Gauge"
	depends on MFD_AXP20X && IIO
	help
	  Say yes here to have support for X-Power power management IC (PMIC)
	  Fuel Gauge. The device provides battery statistics and status
	  monitoring as well as alerts for battery over/under voltage and
	  over/under temperature.

config BATTERY_MAX17040
	tristate "Maxim MAX17040 Fuel Gauge"
	depends on I2C
	help
	  MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17040 is configured
	  to operate with a single lithium cell

config BATTERY_MAX17042
	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
	depends on I2C
	select REGMAP_I2C
	help
	  MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17042 is configured
	  to operate with a single lithium cell. MAX8997 and MAX8966 are
	  multi-function devices that include fuel gauages that are compatible
	  with MAX17042. This driver also supports max17047/50 chips which are
	  improved version of max17042.

config BATTERY_Z2
	tristate "Z2 battery driver"
	depends on I2C && MACH_ZIPIT2
	help
	  Say Y to include support for the battery on the Zipit Z2.

config BATTERY_S3C_ADC
	tristate "Battery driver for Samsung ADC based monitoring"
	depends on S3C_ADC
	help
	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery

config BATTERY_TWL4030_MADC
	tristate "TWL4030 MADC battery driver"
	depends on TWL4030_MADC
	help
	  Say Y here to enable this dumb driver for batteries managed
	  through the TWL4030 MADC.

config CHARGER_88PM860X
	tristate "Marvell 88PM860x Charger driver"
	depends on MFD_88PM860X && BATTERY_88PM860X
	help
	  Say Y here to enable charger for Marvell 88PM860x chip.

config CHARGER_PCF50633
	tristate "NXP PCF50633 MBC"
	depends on MFD_PCF50633
	help
	 Say Y to include support for NXP PCF50633 Main Battery Charger.

config BATTERY_JZ4740
	tristate "Ingenic JZ4740 battery"
	depends on MACH_JZ4740
	depends on MFD_JZ4740_ADC
	help
	  Say Y to enable support for the battery on Ingenic JZ4740 based
	  boards.

	  This driver can be build as a module. If so, the module will be
	  called jz4740-battery.

config BATTERY_INTEL_MID
	tristate "Battery driver for Intel MID platforms"
	depends on INTEL_SCU_IPC && SPI
	help
	  Say Y here to enable the battery driver on Intel MID
	  platforms.

config BATTERY_RX51
	tristate "Nokia RX-51 (N900) battery driver"
	depends on TWL4030_MADC
	help
	  Say Y here to enable support for battery information on Nokia
	  RX-51, also known as N900 tablet.

config CHARGER_ISP1704
	tristate "ISP1704 USB Charger Detection"
	depends on USB_PHY
	help
	  Say Y to enable support for USB Charger Detection with
	  ISP1707/ISP1704 USB transceivers.

config CHARGER_MAX8903
	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
	help
	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
	  The driver supports controlling charger-enable and current-limit
	  pins based on the status of charger connections with interrupt
	  handlers.

config CHARGER_TWL4030
	tristate "OMAP TWL4030 BCI charger driver"
	depends on IIO && TWL4030_CORE
	help
	  Say Y here to enable support for TWL4030 Battery Charge Interface.

config CHARGER_LP8727
	tristate "TI/National Semiconductor LP8727 charger driver"
	depends on I2C
	help
	  Say Y here to enable support for LP8727 Charger Driver.

config CHARGER_LP8788
	tristate "TI LP8788 charger driver"
	depends on MFD_LP8788
	depends on LP8788_ADC
	depends on IIO
	help
	  Say Y to enable support for the LP8788 linear charger.

config CHARGER_GPIO
	tristate "GPIO charger"
	depends on GPIOLIB || COMPILE_TEST
	help
	  Say Y to include support for chargers which report their online status
	  through a GPIO pin.

	  This driver can be build as a module. If so, the module will be
	  called gpio-charger.

config CHARGER_MANAGER
	bool "Battery charger manager for multiple chargers"
	depends on REGULATOR
	select EXTCON
	help
          Say Y to enable charger-manager support, which allows multiple
          chargers attached to a battery and multiple batteries attached to a
          system. The charger-manager also can monitor charging status in
          runtime and in suspend-to-RAM by waking up the system periodically
          with help of suspend_again support.

config CHARGER_MAX14577
	tristate "Maxim MAX14577/77836 battery charger driver"
	depends on MFD_MAX14577
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX14577/77836 MUICs.

config CHARGER_MAX77693
	tristate "Maxim MAX77693 battery charger driver"
	depends on MFD_MAX77693
	help
	  Say Y to enable support for the Maxim MAX77693 battery charger.

config CHARGER_MAX8997
	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
	depends on MFD_MAX8997 && REGULATOR_MAX8997
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8997/LP3974 PMICs.

config CHARGER_MAX8998
	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
	depends on MFD_MAX8998 && REGULATOR_MAX8998
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8998/LP3974 PMICs.

config CHARGER_QCOM_SMBB
	tristate "Qualcomm Switch-Mode Battery Charger and Boost"
	depends on MFD_SPMI_PMIC || COMPILE_TEST
	depends on OF
	help
	  Say Y to include support for the Switch-Mode Battery Charger and
	  Boost (SMBB) hardware found in Qualcomm PM8941 PMICs.  The charger
	  is an integrated, single-cell lithium-ion battery charger.  DT
	  configuration is required for loading, see the devicetree
	  documentation for more detail.  The base name for this driver is
	  'pm8941_charger'.

config CHARGER_BQ2415X
	tristate "TI BQ2415x battery charger driver"
	depends on I2C
	help
	  Say Y to enable support for the TI BQ2415x battery charger
	  PMICs.

	  You'll need this driver to charge batteries on e.g. Nokia
	  RX-51/N900.

config CHARGER_BQ24190
	tristate "TI BQ24190 battery charger driver"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	help
	  Say Y to enable support for the TI BQ24190 battery charger.

config CHARGER_BQ24257
	tristate "TI BQ24250/24251/24257 battery charger driver"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	depends on REGMAP_I2C
	help
	  Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
	  chargers.

config CHARGER_BQ24735
	tristate "TI BQ24735 battery charger support"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	help
	  Say Y to enable support for the TI BQ24735 battery charger.

config CHARGER_BQ25890
	tristate "TI BQ25890 battery charger driver"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	select REGMAP_I2C
	help
	  Say Y to enable support for the TI BQ25890 battery charger.

config CHARGER_SMB347
	tristate "Summit Microelectronics SMB347 Battery Charger"
	depends on I2C
	select REGMAP_I2C
	help
	  Say Y to include support for Summit Microelectronics SMB347
	  Battery Charger.

config CHARGER_TPS65090
	tristate "TPS65090 battery charger driver"
	depends on MFD_TPS65090
	help
	 Say Y here to enable support for battery charging with TPS65090
	 PMIC chips.

config CHARGER_TPS65217
	tristate "TPS65217 battery charger driver"
	depends on MFD_TPS65217
	help
	 Say Y here to enable support for battery charging with TPS65217
	 PMIC chips.

config BATTERY_GAUGE_LTC2941
	tristate "LTC2941/LTC2943 Battery Gauge Driver"
	depends on I2C
	help
	  Say Y here to include support for LTC2941 and LTC2943 Battery
	  Gauge IC. The driver reports the charge count continuously, and
	  measures the voltage and temperature every 10 seconds.

config AB8500_BM
	bool "AB8500 Battery Management Driver"
	depends on AB8500_CORE && AB8500_GPADC
	help
	  Say Y to include support for AB8500 battery management.

config BATTERY_GOLDFISH
	tristate "Goldfish battery driver"
	depends on GOLDFISH || COMPILE_TEST
	depends on HAS_IOMEM
	help
	  Say Y to enable support for the battery and AC power in the
	  Goldfish emulator.

config BATTERY_RT5033
	tristate "RT5033 fuel gauge support"
	depends on MFD_RT5033
	help
	  This adds support for battery fuel gauge in Richtek RT5033 PMIC.
	  The fuelgauge calculates and determines the battery state of charge
	  according to battery open circuit voltage.

config CHARGER_RT9455
	tristate "Richtek RT9455 battery charger driver"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	select REGMAP_I2C
	help
	  Say Y to enable support for Richtek RT9455 battery charger.

config AXP20X_POWER
	tristate "AXP20x power supply driver"
	depends on MFD_AXP20X
	help
	  This driver provides support for the power supply features of
	  AXP20x PMIC.

source "drivers/power/reset/Kconfig"

endif # POWER_SUPPLY

source "drivers/power/avs/Kconfig"
Commit	Line	Data
4a11b59d	1	menuconfig POWER_SUPPLY
0d4ed4e2	2	bool "Power supply class support"
4a11b59d AV	3	help
	4	Say Y here to enable power supply class support. This allows
	5	power supply (batteries, AC, USB) monitoring by userspace
	6	via sysfs and uevent (if available) and/or APM kernel interface
	7	(if selected below).
	8
	9	if POWER_SUPPLY
	10
	11	config POWER_SUPPLY_DEBUG
	12	bool "Power supply debug"
	13	help
	14	Say Y here to enable debugging messages for power supply class
	15	and drivers.
	16
b2998049 AV	17	config PDA_POWER
b2998049 AV	18	tristate "Generic PDA/phone power driver"
5f17c70f	19	depends on !S390
b2998049 AV	20	help
	21	Say Y here to enable generic power driver for PDAs and phones with
	22	one or two external power supplies (AC/USB) connected to main and
	23	backup batteries, and optional builtin charger.
	24
3788ec93 AV	25	config APM_POWER
	26	tristate "APM emulation for class batteries"
	27	depends on APM_EMULATION
	28	help
	29	Say Y here to enable support APM status emulation using
	30	battery class devices.
	31
e60fea79	32	config GENERIC_ADC_BATTERY
	33	tristate "Generic battery support using IIO"
	34	depends on IIO
	35	help
	36	Say Y here to enable support for the generic battery driver
	37	which uses IIO framework to read adc.
	38
28db3888 HZ	39	config MAX8925_POWER
	40	tristate "MAX8925 battery charger support"
	41	depends on MFD_MAX8925
	42	help
	43	Say Y here to enable support for the battery charger in the Maxim
	44	MAX8925 PMIC.
	45
c26964ea MB	46	config WM831X_BACKUP
	47	tristate "WM831X backup battery charger support"
	48	depends on MFD_WM831X
	49	help
	50	Say Y here to enable support for the backup battery charger
	51	in the Wolfson Microelectronics WM831x PMICs.
	52
3961f7c3 MB	53	config WM831X_POWER
	54	tristate "WM831X PMU support"
	55	depends on MFD_WM831X
	56	help
	57	Say Y here to enable support for the power management unit
	58	provided by Wolfson Microelectronics WM831x PMICs.
	59
14431aa0 MB	60	config WM8350_POWER
	61	tristate "WM8350 PMU support"
	62	depends on MFD_WM8350
	63	help
	64	Say Y here to enable support for the power management unit
	65	provided by the Wolfson Microelectronics WM8350 PMIC.
	66
a1e50fd4 AV	67	config TEST_POWER
	68	tristate "Test power driver"
	69	help
	70	This driver is used for testing. It's safe to say M here.
	71
a830d28b JZ	72	config BATTERY_88PM860X
	73	tristate "Marvell 88PM860x battery driver"
	74	depends on MFD_88PM860X
	75	help
	76	Say Y here to enable battery monitor for Marvell 88PM860x chip.
	77
fe0e3153 AV	78	config BATTERY_DS2760
fe0e3153 AV	79	tristate "DS2760 battery driver (HP iPAQ & others)"
f6127b86	80	depends on W1 && W1_SLAVE_DS2760
fe0e3153 AV	81	help
	82	Say Y here to enable support for batteries with ds2760 chip.
	83
275ac746 CB	84	config BATTERY_DS2780
275ac746 CB	85	tristate "DS2780 battery driver"
3369465e	86	depends on HAS_IOMEM
275ac746 CB	87	select W1
	88	select W1_SLAVE_DS2780
	89	help
	90	Say Y here to enable support for batteries with ds2780 chip.
	91
fef37e9a	92	config BATTERY_DS2781
840b91bd	93	tristate "DS2781 battery driver"
fef37e9a RS	94	depends on HAS_IOMEM
	95	select W1
	96	select W1_SLAVE_DS2781
	97	help
	98	If you enable this you will have the DS2781 battery driver support.
	99
	100	The battery monitor chip is used in many batteries/devices
	101	as the one who is responsible for charging/discharging/monitoring
	102	Li+ batteries.
	103
	104	If you are unsure, say N.
	105
bfdb46ce	106	config BATTERY_DS2782
9b9ade6b	107	tristate "DS2782/DS2786 standalone gas-gauge"
bfdb46ce RM	108	depends on I2C
bfdb46ce RM	109	help
9b9ade6b	110	Say Y here to enable support for the DS2782/DS2786 standalone battery
bfdb46ce RM	111	gas-gauge.
bfdb46ce RM	112
efea58e3 DW	113	config BATTERY_PMU
efea58e3 DW	114	tristate "Apple PMU battery"
a1da5f4f	115	depends on PPC32 && ADB_PMU
efea58e3 DW	116	help
	117	Say Y here to expose battery information on Apple machines
	118	through the generic battery class.
	119
fb972873 DW	120	config BATTERY_OLPC
	121	tristate "One Laptop Per Child battery"
	122	depends on X86_32 && OLPC
	123	help
	124	Say Y to enable support for the battery on the OLPC laptop.
	125
fece4184 DB	126	config BATTERY_TOSA
fece4184 DB	127	tristate "Sharp SL-6000 (tosa) battery"
6a903788	128	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
fece4184 DB	129	help
	130	Say Y to enable support for the battery on the Sharp Zaurus
	131	SL-6000 (tosa) models.
	132
f1fce597 TK	133	config BATTERY_COLLIE
	134	tristate "Sharp SL-5500 (collie) battery"
	135	depends on SA1100_COLLIE && MCP_UCB1200
	136	help
	137	Say Y to enable support for the battery on the Sharp Zaurus
	138	SL-5500 (collie) models.
	139
00a588f9 DA	140	config BATTERY_IPAQ_MICRO
	141	tristate "iPAQ Atmel Micro ASIC battery driver"
	142	depends on MFD_IPAQ_MICRO
	143	help
	144	Choose this option if you want to monitor battery status on
	145	Compaq/HP iPAQ h3100 and h3600.
	146
4e9687d9 MV	147	config BATTERY_WM97XX
4e9687d9 MV	148	bool "WM97xx generic battery driver"
5e4c5f4c	149	depends on TOUCHSCREEN_WM97XX=y
d4b19c42	150	help
4e9687d9	151	Say Y to enable support for battery measured by WM97xx aux port.
d4b19c42	152
c78f2b64 RK	153	config BATTERY_SBS
c78f2b64 RK	154	tristate "SBS Compliant gas gauge"
a7640bfa RK	155	depends on I2C
a7640bfa RK	156	help
c78f2b64 RK	157	Say Y to include support for SBS battery driver for SBS-compliant
c78f2b64 RK	158	gas gauges.
a7640bfa	159
081bab21 AD	160	config BATTERY_BQ27XXX
081bab21 AD	161	tristate "BQ27xxx battery driver"
7fb7ba58	162	help
703df6c0	163	Say Y here to enable support for batteries with BQ27xxx chips.
7fb7ba58	164
081bab21	165	config BATTERY_BQ27XXX_I2C
703df6c0	166	tristate "BQ27xxx I2C support"
081bab21	167	depends on BATTERY_BQ27XXX
b996ad0e	168	depends on I2C
7fb7ba58	169	default y
b996ad0e	170	help
703df6c0 AD	171	Say Y here to enable support for batteries with BQ27xxx chips
703df6c0 AD	172	connected over an I2C bus.
7fb7ba58	173
342d765e MR	174	config BATTERY_DA9030
	175	tristate "DA9030 battery driver"
	176	depends on PMIC_DA903X
	177	help
	178	Say Y here to enable support for batteries charger integrated into
	179	DA9030 PMIC.
	180
ded7fc7b AJ	181	config BATTERY_DA9052
	182	tristate "Dialog DA9052 Battery"
	183	depends on PMIC_DA9052
	184	help
	185	Say Y here to enable support for batteries charger integrated into
	186	DA9052 PMIC.
	187
c1a281e3 AT	188	config CHARGER_DA9150
	189	tristate "Dialog Semiconductor DA9150 Charger support"
	190	depends on MFD_DA9150
	191	depends on DA9150_GPADC
	192	depends on IIO
	193	help
	194	Say Y here to enable support for charger unit of the DA9150
	195	Integrated Charger & Fuel-Gauge IC.
	196
	197	This driver can also be built as a module. If so, the module will be
	198	called da9150-charger.
	199
a419b4fd AT	200	config BATTERY_DA9150
	201	tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
	202	depends on MFD_DA9150
	203	help
	204	Say Y here to enable support for the Fuel-Gauge unit of the DA9150
	205	Integrated Charger & Fuel-Gauge IC
	206
	207	This driver can also be built as a module. If so, the module will be
	208	called da9150-fg.
	209
843735b7 RP	210	config AXP288_CHARGER
	211	tristate "X-Powers AXP288 Charger"
	212	depends on MFD_AXP20X && EXTCON_AXP288
	213	help
	214	Say yes here to have support X-Power AXP288 power management IC (PMIC)
	215	integrated charger.
	216
5a5bf490 TB	217	config AXP288_FUEL_GAUGE
	218	tristate "X-Powers AXP288 Fuel Gauge"
	219	depends on MFD_AXP20X && IIO
	220	help
	221	Say yes here to have support for X-Power power management IC (PMIC)
	222	Fuel Gauge. The device provides battery statistics and status
	223	monitoring as well as alerts for battery over/under voltage and
	224	over/under temperature.
	225
c6f4a42d MK	226	config BATTERY_MAX17040
	227	tristate "Maxim MAX17040 Fuel Gauge"
	228	depends on I2C
	229	help
	230	MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
	231	in handheld and portable equipment. The MAX17040 is configured
	232	to operate with a single lithium cell
	233
359ab9f5	234	config BATTERY_MAX17042
9a8422d2	235	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
359ab9f5	236	depends on I2C
93353e80	237	select REGMAP_I2C
359ab9f5 MH	238	help
	239	MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
	240	in handheld and portable equipment. The MAX17042 is configured
	241	to operate with a single lithium cell. MAX8997 and MAX8966 are
	242	multi-function devices that include fuel gauages that are compatible
9a8422d2 RP	243	with MAX17042. This driver also supports max17047/50 chips which are
9a8422d2 RP	244	improved version of max17042.
359ab9f5	245
e3e8d1c9 MV	246	config BATTERY_Z2
	247	tristate "Z2 battery driver"
	248	depends on I2C && MACH_ZIPIT2
	249	help
	250	Say Y to include support for the battery on the Zipit Z2.
	251
808be4b2 VK	252	config BATTERY_S3C_ADC
	253	tristate "Battery driver for Samsung ADC based monitoring"
	254	depends on S3C_ADC
	255	help
	256	Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
	257
da0a00eb MB	258	config BATTERY_TWL4030_MADC
	259	tristate "TWL4030 MADC battery driver"
	260	depends on TWL4030_MADC
	261	help
	262	Say Y here to enable this dumb driver for batteries managed
	263	through the TWL4030 MADC.
	264
a830d28b JZ	265	config CHARGER_88PM860X
	266	tristate "Marvell 88PM860x Charger driver"
	267	depends on MFD_88PM860X && BATTERY_88PM860X
	268	help
	269	Say Y here to enable charger for Marvell 88PM860x chip.
	270
f5714dc9 BR	271	config CHARGER_PCF50633
	272	tristate "NXP PCF50633 MBC"
	273	depends on MFD_PCF50633
	274	help
	275	Say Y to include support for NXP PCF50633 Main Battery Charger.
	276
f6a21388 LPC	277	config BATTERY_JZ4740
	278	tristate "Ingenic JZ4740 battery"
	279	depends on MACH_JZ4740
	280	depends on MFD_JZ4740_ADC
	281	help
	282	Say Y to enable support for the battery on Ingenic JZ4740 based
	283	boards.
	284
	285	This driver can be build as a module. If so, the module will be
	286	called jz4740-battery.
	287
6721081b NM	288	config BATTERY_INTEL_MID
	289	tristate "Battery driver for Intel MID platforms"
	290	depends on INTEL_SCU_IPC && SPI
	291	help
	292	Say Y here to enable the battery driver on Intel MID
	293	platforms.
	294
04930baf PR	295	config BATTERY_RX51
	296	tristate "Nokia RX-51 (N900) battery driver"
	297	depends on TWL4030_MADC
	298	help
	299	Say Y here to enable support for battery information on Nokia
	300	RX-51, also known as N900 tablet.
	301
ec46475f HK	302	config CHARGER_ISP1704
ec46475f HK	303	tristate "ISP1704 USB Charger Detection"
fd891498	304	depends on USB_PHY
ec46475f HK	305	help
	306	Say Y to enable support for USB Charger Detection with
	307	ISP1707/ISP1704 USB transceivers.
	308
b14a9ccc MH	309	config CHARGER_MAX8903
	310	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
	311	help
	312	Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
	313	The driver supports controlling charger-enable and current-limit
	314	pins based on the status of charger connections with interrupt
	315	handlers.
	316
2e727f17 GI	317	config CHARGER_TWL4030
2e727f17 GI	318	tristate "OMAP TWL4030 BCI charger driver"
0f4998cb	319	depends on IIO && TWL4030_CORE
2e727f17 GI	320	help
	321	Say Y here to enable support for TWL4030 Battery Charge Interface.
	322
2165c8a4	323	config CHARGER_LP8727
e39b828f	324	tristate "TI/National Semiconductor LP8727 charger driver"
2165c8a4 WK	325	depends on I2C
	326	help
	327	Say Y here to enable support for LP8727 Charger Driver.
	328
98a27664 KM	329	config CHARGER_LP8788
	330	tristate "TI LP8788 charger driver"
	331	depends on MFD_LP8788
	332	depends on LP8788_ADC
237a1b01	333	depends on IIO
98a27664 KM	334	help
	335	Say Y to enable support for the LP8788 linear charger.
	336
5070437c LPC	337	config CHARGER_GPIO
5070437c LPC	338	tristate "GPIO charger"
1e8b82c1	339	depends on GPIOLIB \|\| COMPILE_TEST
5070437c LPC	340	help
	341	Say Y to include support for chargers which report their online status
	342	through a GPIO pin.
	343
	344	This driver can be build as a module. If so, the module will be
	345	called gpio-charger.
	346
3bb3dbbd DK	347	config CHARGER_MANAGER
3bb3dbbd DK	348	bool "Battery charger manager for multiple chargers"
c1155c64	349	depends on REGULATOR
c4727555	350	select EXTCON
3bb3dbbd DK	351	help
	352	Say Y to enable charger-manager support, which allows multiple
	353	chargers attached to a battery and multiple batteries attached to a
	354	system. The charger-manager also can monitor charging status in
	355	runtime and in suspend-to-RAM by waking up the system periodically
	356	with help of suspend_again support.
	357
55e64701	358	config CHARGER_MAX14577
3682a8ee	359	tristate "Maxim MAX14577/77836 battery charger driver"
55e64701 KK	360	depends on MFD_MAX14577
	361	help
	362	Say Y to enable support for the battery charger control sysfs and
3682a8ee	363	platform data of MAX14577/77836 MUICs.
55e64701	364
87c2d906 KK	365	config CHARGER_MAX77693
	366	tristate "Maxim MAX77693 battery charger driver"
	367	depends on MFD_MAX77693
	368	help
	369	Say Y to enable support for the Maxim MAX77693 battery charger.
	370
149c077b DK	371	config CHARGER_MAX8997
	372	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
	373	depends on MFD_MAX8997 && REGULATOR_MAX8997
	374	help
	375	Say Y to enable support for the battery charger control sysfs and
	376	platform data of MAX8997/LP3974 PMICs.
	377
bb4ce970 DK	378	config CHARGER_MAX8998
	379	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
	380	depends on MFD_MAX8998 && REGULATOR_MAX8998
	381	help
	382	Say Y to enable support for the battery charger control sysfs and
	383	platform data of MAX8998/LP3974 PMICs.
	384
56d7df87 CC	385	config CHARGER_QCOM_SMBB
	386	tristate "Qualcomm Switch-Mode Battery Charger and Boost"
	387	depends on MFD_SPMI_PMIC \|\| COMPILE_TEST
	388	depends on OF
	389	help
	390	Say Y to include support for the Switch-Mode Battery Charger and
	391	Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger
	392	is an integrated, single-cell lithium-ion battery charger. DT
	393	configuration is required for loading, see the devicetree
	394	documentation for more detail. The base name for this driver is
	395	'pm8941_charger'.
	396
7ad85830 AV	397	config CHARGER_BQ2415X
	398	tristate "TI BQ2415x battery charger driver"
	399	depends on I2C
	400	help
	401	Say Y to enable support for the TI BQ2415x battery charger
	402	PMICs.
	403
	404	You'll need this driver to charge batteries on e.g. Nokia
	405	RX-51/N900.
	406
d7bf353f MG	407	config CHARGER_BQ24190
d7bf353f MG	408	tristate "TI BQ24190 battery charger driver"
1e8b82c1 GU	409	depends on I2C
1e8b82c1 GU	410	depends on GPIOLIB \|\| COMPILE_TEST
d7bf353f MG	411	help
	412	Say Y to enable support for the TI BQ24190 battery charger.
	413
2219a935	414	config CHARGER_BQ24257
bf02dca9	415	tristate "TI BQ24250/24251/24257 battery charger driver"
1e8b82c1 GU	416	depends on I2C
1e8b82c1 GU	417	depends on GPIOLIB \|\| COMPILE_TEST
2219a935 LP	418	depends on REGMAP_I2C
2219a935 LP	419	help
bf02dca9 AD	420	Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
bf02dca9 AD	421	chargers.
2219a935	422
ce773992 DS	423	config CHARGER_BQ24735
ce773992 DS	424	tristate "TI BQ24735 battery charger support"
1e8b82c1 GU	425	depends on I2C
1e8b82c1 GU	426	depends on GPIOLIB \|\| COMPILE_TEST
ce773992 DS	427	help
	428	Say Y to enable support for the TI BQ24735 battery charger.
	429
4aeae9cb LP	430	config CHARGER_BQ25890
4aeae9cb LP	431	tristate "TI BQ25890 battery charger driver"
1e8b82c1 GU	432	depends on I2C
1e8b82c1 GU	433	depends on GPIOLIB \|\| COMPILE_TEST
4aeae9cb LP	434	select REGMAP_I2C
	435	help
	436	Say Y to enable support for the TI BQ25890 battery charger.
	437
ed1a230f BR	438	config CHARGER_SMB347
	439	tristate "Summit Microelectronics SMB347 Battery Charger"
	440	depends on I2C
34298d40	441	select REGMAP_I2C
ed1a230f BR	442	help
	443	Say Y to include support for Summit Microelectronics SMB347
	444	Battery Charger.
	445
6f8da5df RK	446	config CHARGER_TPS65090
	447	tristate "TPS65090 battery charger driver"
	448	depends on MFD_TPS65090
	449	help
	450	Say Y here to enable support for battery charging with TPS65090
	451	PMIC chips.
	452
3636859b EBS	453	config CHARGER_TPS65217
	454	tristate "TPS65217 battery charger driver"
	455	depends on MFD_TPS65217
	456	help
	457	Say Y here to enable support for battery charging with TPS65217
	458	PMIC chips.
	459
085bc24d ML	460	config BATTERY_GAUGE_LTC2941
	461	tristate "LTC2941/LTC2943 Battery Gauge Driver"
	462	depends on I2C
	463	help
	464	Say Y here to include support for LTC2941 and LTC2943 Battery
	465	Gauge IC. The driver reports the charge count continuously, and
	466	measures the voltage and temperature every 10 seconds.
	467
1f855824 AM	468	config AB8500_BM
	469	bool "AB8500 Battery Management Driver"
	470	depends on AB8500_CORE && AB8500_GPADC
	471	help
8b7d133c	472	Say Y to include support for AB8500 battery management.
1f855824	473
84d7b768 ML	474	config BATTERY_GOLDFISH
84d7b768 ML	475	tristate "Goldfish battery driver"
0244ad00	476	depends on GOLDFISH \|\| COMPILE_TEST
850bc4d5	477	depends on HAS_IOMEM
84d7b768 ML	478	help
	479	Say Y to enable support for the battery and AC power in the
	480	Goldfish emulator.
	481
b847dd96 BS	482	config BATTERY_RT5033
	483	tristate "RT5033 fuel gauge support"
	484	depends on MFD_RT5033
	485	help
	486	This adds support for battery fuel gauge in Richtek RT5033 PMIC.
	487	The fuelgauge calculates and determines the battery state of charge
	488	according to battery open circuit voltage.
	489
e86d69dd AMN	490	config CHARGER_RT9455
e86d69dd AMN	491	tristate "Richtek RT9455 battery charger driver"
1e8b82c1 GU	492	depends on I2C
1e8b82c1 GU	493	depends on GPIOLIB \|\| COMPILE_TEST
e86d69dd AMN	494	select REGMAP_I2C
	495	help
	496	Say Y to enable support for Richtek RT9455 battery charger.
	497
69fb4dca HG	498	config AXP20X_POWER
	499	tristate "AXP20x power supply driver"
	500	depends on MFD_AXP20X
	501	help
	502	This driver provides support for the power supply features of
	503	AXP20x PMIC.
	504
96ff0f5c JL	505	source "drivers/power/reset/Kconfig"
96ff0f5c JL	506
4a11b59d	507	endif # POWER_SUPPLY
21ff63ad JP	508
21ff63ad JP	509	source "drivers/power/avs/Kconfig"