[deliverable/linux.git] / drivers / power / Kconfig

menuconfig POWER_SUPPLY
	bool "Power supply class support"
	help
	  Say Y here to enable power supply class support. This allows
	  power supply (batteries, AC, USB) monitoring by userspace
	  via sysfs and uevent (if available) and/or APM kernel interface
	  (if selected below).

if POWER_SUPPLY

config POWER_SUPPLY_DEBUG
	bool "Power supply debug"
	help
	  Say Y here to enable debugging messages for power supply class
	  and drivers.

config PDA_POWER
	tristate "Generic PDA/phone power driver"
	depends on !S390
	help
	  Say Y here to enable generic power driver for PDAs and phones with
	  one or two external power supplies (AC/USB) connected to main and
	  backup batteries, and optional builtin charger.

config APM_POWER
	tristate "APM emulation for class batteries"
	depends on APM_EMULATION
	help
	  Say Y here to enable support APM status emulation using
	  battery class devices.

config GENERIC_ADC_BATTERY
	tristate "Generic battery support using IIO"
	depends on IIO
	help
	  Say Y here to enable support for the generic battery driver
	  which uses IIO framework to read adc.

config MAX8925_POWER
	tristate "MAX8925 battery charger support"
	depends on MFD_MAX8925
	help
	  Say Y here to enable support for the battery charger in the Maxim
	  MAX8925 PMIC.

config WM831X_BACKUP
	tristate "WM831X backup battery charger support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the backup battery charger
	  in the Wolfson Microelectronics WM831x PMICs.

config WM831X_POWER
	tristate "WM831X PMU support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the power management unit
	  provided by Wolfson Microelectronics WM831x PMICs.

config WM8350_POWER
        tristate "WM8350 PMU support"
        depends on MFD_WM8350
        help
          Say Y here to enable support for the power management unit
	  provided by the Wolfson Microelectronics WM8350 PMIC.

config TEST_POWER
	tristate "Test power driver"
	help
	  This driver is used for testing. It's safe to say M here.

config BATTERY_88PM860X
	tristate "Marvell 88PM860x battery driver"
	depends on MFD_88PM860X
	help
	  Say Y here to enable battery monitor for Marvell 88PM860x chip.

config BATTERY_DS2760
	tristate "DS2760 battery driver (HP iPAQ & others)"
	depends on W1 && W1_SLAVE_DS2760
	help
	  Say Y here to enable support for batteries with ds2760 chip.

config BATTERY_DS2780
	tristate "DS2780 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2780
	help
	  Say Y here to enable support for batteries with ds2780 chip.

config BATTERY_DS2781
	tristate "DS2781 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2781
	help
	  If you enable this you will have the DS2781 battery driver support.

	  The battery monitor chip is used in many batteries/devices
	  as the one who is responsible for charging/discharging/monitoring
	  Li+ batteries.

	  If you are unsure, say N.

config BATTERY_DS2782
	tristate "DS2782/DS2786 standalone gas-gauge"
	depends on I2C
	help
	  Say Y here to enable support for the DS2782/DS2786 standalone battery
	  gas-gauge.

config BATTERY_PMU
	tristate "Apple PMU battery"
	depends on PPC32 && ADB_PMU
	help
	  Say Y here to expose battery information on Apple machines
	  through the generic battery class.

config BATTERY_OLPC
	tristate "One Laptop Per Child battery"
	depends on X86_32 && OLPC
	help
	  Say Y to enable support for the battery on the OLPC laptop.

config BATTERY_TOSA
	tristate "Sharp SL-6000 (tosa) battery"
	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-6000 (tosa) models.

config BATTERY_COLLIE
	tristate "Sharp SL-5500 (collie) battery"
	depends on SA1100_COLLIE && MCP_UCB1200
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-5500 (collie) models.

config BATTERY_IPAQ_MICRO
	tristate "iPAQ Atmel Micro ASIC battery driver"
	depends on MFD_IPAQ_MICRO
	help
	  Choose this option if you want to monitor battery status on
	  Compaq/HP iPAQ h3100 and h3600.

config BATTERY_WM97XX
	bool "WM97xx generic battery driver"
	depends on TOUCHSCREEN_WM97XX=y
	help
	  Say Y to enable support for battery measured by WM97xx aux port.

config BATTERY_SBS
        tristate "SBS Compliant gas gauge"
        depends on I2C
        help
	  Say Y to include support for SBS battery driver for SBS-compliant
	  gas gauges.

config BATTERY_BQ27x00
	tristate "BQ27x00 battery driver"
	depends on I2C || I2C=n
	help
	  Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips.

config BATTERY_BQ27X00_I2C
	bool "BQ27200/BQ27500 support"
	depends on BATTERY_BQ27x00
	depends on I2C
	default y
	help
	  Say Y here to enable support for batteries with BQ27x00 (I2C) chips.

config BATTERY_BQ27X00_PLATFORM
	bool "BQ27000 support"
	depends on BATTERY_BQ27x00
	default y
	help
	  Say Y here to enable support for batteries with BQ27000 (HDQ) chips.

config BATTERY_DA9030
	tristate "DA9030 battery driver"
	depends on PMIC_DA903X
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9030 PMIC.

config BATTERY_DA9052
	tristate "Dialog DA9052 Battery"
	depends on PMIC_DA9052
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9052 PMIC.

config CHARGER_DA9150
	tristate "Dialog Semiconductor DA9150 Charger support"
	depends on MFD_DA9150
	depends on DA9150_GPADC
	depends on IIO
	help
	  Say Y here to enable support for charger unit of the DA9150
	  Integrated Charger & Fuel-Gauge IC.

	  This driver can also be built as a module. If so, the module will be
	  called da9150-charger.

config BATTERY_MAX17040
	tristate "Maxim MAX17040 Fuel Gauge"
	depends on I2C
	help
	  MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17040 is configured
	  to operate with a single lithium cell

config BATTERY_MAX17042
	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
	depends on I2C
	select REGMAP_I2C
	help
	  MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17042 is configured
	  to operate with a single lithium cell. MAX8997 and MAX8966 are
	  multi-function devices that include fuel gauages that are compatible
	  with MAX17042. This driver also supports max17047/50 chips which are
	  improved version of max17042.

config BATTERY_Z2
	tristate "Z2 battery driver"
	depends on I2C && MACH_ZIPIT2
	help
	  Say Y to include support for the battery on the Zipit Z2.

config BATTERY_S3C_ADC
	tristate "Battery driver for Samsung ADC based monitoring"
	depends on S3C_ADC
	help
	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery

config BATTERY_TWL4030_MADC
	tristate "TWL4030 MADC battery driver"
	depends on TWL4030_MADC
	help
	  Say Y here to enable this dumb driver for batteries managed
	  through the TWL4030 MADC.

config CHARGER_88PM860X
	tristate "Marvell 88PM860x Charger driver"
	depends on MFD_88PM860X && BATTERY_88PM860X
	help
	  Say Y here to enable charger for Marvell 88PM860x chip.

config CHARGER_PCF50633
	tristate "NXP PCF50633 MBC"
	depends on MFD_PCF50633
	help
	 Say Y to include support for NXP PCF50633 Main Battery Charger.

config BATTERY_JZ4740
	tristate "Ingenic JZ4740 battery"
	depends on MACH_JZ4740
	depends on MFD_JZ4740_ADC
	help
	  Say Y to enable support for the battery on Ingenic JZ4740 based
	  boards.

	  This driver can be build as a module. If so, the module will be
	  called jz4740-battery.

config BATTERY_INTEL_MID
	tristate "Battery driver for Intel MID platforms"
	depends on INTEL_SCU_IPC && SPI
	help
	  Say Y here to enable the battery driver on Intel MID
	  platforms.

config BATTERY_RX51
	tristate "Nokia RX-51 (N900) battery driver"
	depends on TWL4030_MADC
	help
	  Say Y here to enable support for battery information on Nokia
	  RX-51, also known as N900 tablet.

config CHARGER_ISP1704
	tristate "ISP1704 USB Charger Detection"
	depends on USB_PHY
	help
	  Say Y to enable support for USB Charger Detection with
	  ISP1707/ISP1704 USB transceivers.

config CHARGER_MAX8903
	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
	help
	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
	  The driver supports controlling charger-enable and current-limit
	  pins based on the status of charger connections with interrupt
	  handlers.

config CHARGER_TWL4030
	tristate "OMAP TWL4030 BCI charger driver"
	depends on TWL4030_CORE
	help
	  Say Y here to enable support for TWL4030 Battery Charge Interface.

config CHARGER_LP8727
	tristate "TI/National Semiconductor LP8727 charger driver"
	depends on I2C
	help
	  Say Y here to enable support for LP8727 Charger Driver.

config CHARGER_LP8788
	tristate "TI LP8788 charger driver"
	depends on MFD_LP8788
	depends on LP8788_ADC
	depends on IIO
	help
	  Say Y to enable support for the LP8788 linear charger.

config CHARGER_GPIO
	tristate "GPIO charger"
	depends on GPIOLIB
	help
	  Say Y to include support for chargers which report their online status
	  through a GPIO pin.

	  This driver can be build as a module. If so, the module will be
	  called gpio-charger.

config CHARGER_MANAGER
	bool "Battery charger manager for multiple chargers"
	depends on REGULATOR
	select EXTCON
	help
          Say Y to enable charger-manager support, which allows multiple
          chargers attached to a battery and multiple batteries attached to a
          system. The charger-manager also can monitor charging status in
          runtime and in suspend-to-RAM by waking up the system periodically
          with help of suspend_again support.

config CHARGER_MAX14577
	tristate "Maxim MAX14577/77836 battery charger driver"
	depends on MFD_MAX14577
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX14577/77836 MUICs.

config CHARGER_MAX77693
	tristate "Maxim MAX77693 battery charger driver"
	depends on MFD_MAX77693
	help
	  Say Y to enable support for the Maxim MAX77693 battery charger.

config CHARGER_MAX8997
	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
	depends on MFD_MAX8997 && REGULATOR_MAX8997
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8997/LP3974 PMICs.

config CHARGER_MAX8998
	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
	depends on MFD_MAX8998 && REGULATOR_MAX8998
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8998/LP3974 PMICs.

config CHARGER_BQ2415X
	tristate "TI BQ2415x battery charger driver"
	depends on I2C
	help
	  Say Y to enable support for the TI BQ2415x battery charger
	  PMICs.

	  You'll need this driver to charge batteries on e.g. Nokia
	  RX-51/N900.

config CHARGER_BQ24190
	tristate "TI BQ24190 battery charger driver"
	depends on I2C && GPIOLIB
	help
	  Say Y to enable support for the TI BQ24190 battery charger.

config CHARGER_BQ24735
	tristate "TI BQ24735 battery charger support"
	depends on I2C && GPIOLIB
	help
	  Say Y to enable support for the TI BQ24735 battery charger.

config CHARGER_SMB347
	tristate "Summit Microelectronics SMB347 Battery Charger"
	depends on I2C
	select REGMAP_I2C
	help
	  Say Y to include support for Summit Microelectronics SMB347
	  Battery Charger.

config CHARGER_TPS65090
	tristate "TPS65090 battery charger driver"
	depends on MFD_TPS65090
	help
	 Say Y here to enable support for battery charging with TPS65090
	 PMIC chips.

config BATTERY_GAUGE_LTC2941
	tristate "LTC2941/LTC2943 Battery Gauge Driver"
	depends on I2C
	help
	  Say Y here to include support for LTC2941 and LTC2943 Battery
	  Gauge IC. The driver reports the charge count continuously, and
	  measures the voltage and temperature every 10 seconds.

config AB8500_BM
	bool "AB8500 Battery Management Driver"
	depends on AB8500_CORE && AB8500_GPADC
	help
	  Say Y to include support for AB8500 battery management.

config BATTERY_GOLDFISH
	tristate "Goldfish battery driver"
	depends on GOLDFISH || COMPILE_TEST
	depends on HAS_IOMEM
	help
	  Say Y to enable support for the battery and AC power in the
	  Goldfish emulator.

config BATTERY_RT5033
	tristate "RT5033 fuel gauge support"
	depends on MFD_RT5033
	help
	  This adds support for battery fuel gauge in Richtek RT5033 PMIC.
	  The fuelgauge calculates and determines the battery state of charge
	  according to battery open circuit voltage.

source "drivers/power/reset/Kconfig"

endif # POWER_SUPPLY

source "drivers/power/avs/Kconfig"
Commit	Line	Data
4a11b59d	1	menuconfig POWER_SUPPLY
0d4ed4e2	2	bool "Power supply class support"
4a11b59d AV	3	help
	4	Say Y here to enable power supply class support. This allows
	5	power supply (batteries, AC, USB) monitoring by userspace
	6	via sysfs and uevent (if available) and/or APM kernel interface
	7	(if selected below).
	8
	9	if POWER_SUPPLY
	10
	11	config POWER_SUPPLY_DEBUG
	12	bool "Power supply debug"
	13	help
	14	Say Y here to enable debugging messages for power supply class
	15	and drivers.
	16
b2998049 AV	17	config PDA_POWER
b2998049 AV	18	tristate "Generic PDA/phone power driver"
5f17c70f	19	depends on !S390
b2998049 AV	20	help
	21	Say Y here to enable generic power driver for PDAs and phones with
	22	one or two external power supplies (AC/USB) connected to main and
	23	backup batteries, and optional builtin charger.
	24
3788ec93 AV	25	config APM_POWER
	26	tristate "APM emulation for class batteries"
	27	depends on APM_EMULATION
	28	help
	29	Say Y here to enable support APM status emulation using
	30	battery class devices.
	31
e60fea79	32	config GENERIC_ADC_BATTERY
	33	tristate "Generic battery support using IIO"
	34	depends on IIO
	35	help
	36	Say Y here to enable support for the generic battery driver
	37	which uses IIO framework to read adc.
	38
28db3888 HZ	39	config MAX8925_POWER
	40	tristate "MAX8925 battery charger support"
	41	depends on MFD_MAX8925
	42	help
	43	Say Y here to enable support for the battery charger in the Maxim
	44	MAX8925 PMIC.
	45
c26964ea MB	46	config WM831X_BACKUP
	47	tristate "WM831X backup battery charger support"
	48	depends on MFD_WM831X
	49	help
	50	Say Y here to enable support for the backup battery charger
	51	in the Wolfson Microelectronics WM831x PMICs.
	52
3961f7c3 MB	53	config WM831X_POWER
	54	tristate "WM831X PMU support"
	55	depends on MFD_WM831X
	56	help
	57	Say Y here to enable support for the power management unit
	58	provided by Wolfson Microelectronics WM831x PMICs.
	59
14431aa0 MB	60	config WM8350_POWER
	61	tristate "WM8350 PMU support"
	62	depends on MFD_WM8350
	63	help
	64	Say Y here to enable support for the power management unit
	65	provided by the Wolfson Microelectronics WM8350 PMIC.
	66
a1e50fd4 AV	67	config TEST_POWER
	68	tristate "Test power driver"
	69	help
	70	This driver is used for testing. It's safe to say M here.
	71
a830d28b JZ	72	config BATTERY_88PM860X
	73	tristate "Marvell 88PM860x battery driver"
	74	depends on MFD_88PM860X
	75	help
	76	Say Y here to enable battery monitor for Marvell 88PM860x chip.
	77
fe0e3153 AV	78	config BATTERY_DS2760
fe0e3153 AV	79	tristate "DS2760 battery driver (HP iPAQ & others)"
f6127b86	80	depends on W1 && W1_SLAVE_DS2760
fe0e3153 AV	81	help
	82	Say Y here to enable support for batteries with ds2760 chip.
	83
275ac746 CB	84	config BATTERY_DS2780
275ac746 CB	85	tristate "DS2780 battery driver"
3369465e	86	depends on HAS_IOMEM
275ac746 CB	87	select W1
	88	select W1_SLAVE_DS2780
	89	help
	90	Say Y here to enable support for batteries with ds2780 chip.
	91
fef37e9a	92	config BATTERY_DS2781
840b91bd	93	tristate "DS2781 battery driver"
fef37e9a RS	94	depends on HAS_IOMEM
	95	select W1
	96	select W1_SLAVE_DS2781
	97	help
	98	If you enable this you will have the DS2781 battery driver support.
	99
	100	The battery monitor chip is used in many batteries/devices
	101	as the one who is responsible for charging/discharging/monitoring
	102	Li+ batteries.
	103
	104	If you are unsure, say N.
	105
bfdb46ce	106	config BATTERY_DS2782
9b9ade6b	107	tristate "DS2782/DS2786 standalone gas-gauge"
bfdb46ce RM	108	depends on I2C
bfdb46ce RM	109	help
9b9ade6b	110	Say Y here to enable support for the DS2782/DS2786 standalone battery
bfdb46ce RM	111	gas-gauge.
bfdb46ce RM	112
efea58e3 DW	113	config BATTERY_PMU
efea58e3 DW	114	tristate "Apple PMU battery"
a1da5f4f	115	depends on PPC32 && ADB_PMU
efea58e3 DW	116	help
	117	Say Y here to expose battery information on Apple machines
	118	through the generic battery class.
	119
fb972873 DW	120	config BATTERY_OLPC
	121	tristate "One Laptop Per Child battery"
	122	depends on X86_32 && OLPC
	123	help
	124	Say Y to enable support for the battery on the OLPC laptop.
	125
fece4184 DB	126	config BATTERY_TOSA
fece4184 DB	127	tristate "Sharp SL-6000 (tosa) battery"
6a903788	128	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
fece4184 DB	129	help
	130	Say Y to enable support for the battery on the Sharp Zaurus
	131	SL-6000 (tosa) models.
	132
f1fce597 TK	133	config BATTERY_COLLIE
	134	tristate "Sharp SL-5500 (collie) battery"
	135	depends on SA1100_COLLIE && MCP_UCB1200
	136	help
	137	Say Y to enable support for the battery on the Sharp Zaurus
	138	SL-5500 (collie) models.
	139
00a588f9 DA	140	config BATTERY_IPAQ_MICRO
	141	tristate "iPAQ Atmel Micro ASIC battery driver"
	142	depends on MFD_IPAQ_MICRO
	143	help
	144	Choose this option if you want to monitor battery status on
	145	Compaq/HP iPAQ h3100 and h3600.
	146
4e9687d9 MV	147	config BATTERY_WM97XX
4e9687d9 MV	148	bool "WM97xx generic battery driver"
5e4c5f4c	149	depends on TOUCHSCREEN_WM97XX=y
d4b19c42	150	help
4e9687d9	151	Say Y to enable support for battery measured by WM97xx aux port.
d4b19c42	152
c78f2b64 RK	153	config BATTERY_SBS
c78f2b64 RK	154	tristate "SBS Compliant gas gauge"
a7640bfa RK	155	depends on I2C
a7640bfa RK	156	help
c78f2b64 RK	157	Say Y to include support for SBS battery driver for SBS-compliant
c78f2b64 RK	158	gas gauges.
a7640bfa	159
b996ad0e	160	config BATTERY_BQ27x00
e20908d9	161	tristate "BQ27x00 battery driver"
a2d0dbb4	162	depends on I2C \|\| I2C=n
7fb7ba58 LPC	163	help
	164	Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips.
	165
	166	config BATTERY_BQ27X00_I2C
	167	bool "BQ27200/BQ27500 support"
	168	depends on BATTERY_BQ27x00
b996ad0e	169	depends on I2C
7fb7ba58	170	default y
b996ad0e	171	help
e20908d9	172	Say Y here to enable support for batteries with BQ27x00 (I2C) chips.
b996ad0e	173
7fb7ba58 LPC	174	config BATTERY_BQ27X00_PLATFORM
	175	bool "BQ27000 support"
	176	depends on BATTERY_BQ27x00
	177	default y
	178	help
	179	Say Y here to enable support for batteries with BQ27000 (HDQ) chips.
	180
342d765e MR	181	config BATTERY_DA9030
	182	tristate "DA9030 battery driver"
	183	depends on PMIC_DA903X
	184	help
	185	Say Y here to enable support for batteries charger integrated into
	186	DA9030 PMIC.
	187
ded7fc7b AJ	188	config BATTERY_DA9052
	189	tristate "Dialog DA9052 Battery"
	190	depends on PMIC_DA9052
	191	help
	192	Say Y here to enable support for batteries charger integrated into
	193	DA9052 PMIC.
	194
c1a281e3 AT	195	config CHARGER_DA9150
	196	tristate "Dialog Semiconductor DA9150 Charger support"
	197	depends on MFD_DA9150
	198	depends on DA9150_GPADC
	199	depends on IIO
	200	help
	201	Say Y here to enable support for charger unit of the DA9150
	202	Integrated Charger & Fuel-Gauge IC.
	203
	204	This driver can also be built as a module. If so, the module will be
	205	called da9150-charger.
	206
c6f4a42d MK	207	config BATTERY_MAX17040
	208	tristate "Maxim MAX17040 Fuel Gauge"
	209	depends on I2C
	210	help
	211	MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
	212	in handheld and portable equipment. The MAX17040 is configured
	213	to operate with a single lithium cell
	214
359ab9f5	215	config BATTERY_MAX17042
9a8422d2	216	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
359ab9f5	217	depends on I2C
93353e80	218	select REGMAP_I2C
359ab9f5 MH	219	help
	220	MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
	221	in handheld and portable equipment. The MAX17042 is configured
	222	to operate with a single lithium cell. MAX8997 and MAX8966 are
	223	multi-function devices that include fuel gauages that are compatible
9a8422d2 RP	224	with MAX17042. This driver also supports max17047/50 chips which are
9a8422d2 RP	225	improved version of max17042.
359ab9f5	226
e3e8d1c9 MV	227	config BATTERY_Z2
	228	tristate "Z2 battery driver"
	229	depends on I2C && MACH_ZIPIT2
	230	help
	231	Say Y to include support for the battery on the Zipit Z2.
	232
808be4b2 VK	233	config BATTERY_S3C_ADC
	234	tristate "Battery driver for Samsung ADC based monitoring"
	235	depends on S3C_ADC
	236	help
	237	Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
	238
da0a00eb MB	239	config BATTERY_TWL4030_MADC
	240	tristate "TWL4030 MADC battery driver"
	241	depends on TWL4030_MADC
	242	help
	243	Say Y here to enable this dumb driver for batteries managed
	244	through the TWL4030 MADC.
	245
a830d28b JZ	246	config CHARGER_88PM860X
	247	tristate "Marvell 88PM860x Charger driver"
	248	depends on MFD_88PM860X && BATTERY_88PM860X
	249	help
	250	Say Y here to enable charger for Marvell 88PM860x chip.
	251
f5714dc9 BR	252	config CHARGER_PCF50633
	253	tristate "NXP PCF50633 MBC"
	254	depends on MFD_PCF50633
	255	help
	256	Say Y to include support for NXP PCF50633 Main Battery Charger.
	257
f6a21388 LPC	258	config BATTERY_JZ4740
	259	tristate "Ingenic JZ4740 battery"
	260	depends on MACH_JZ4740
	261	depends on MFD_JZ4740_ADC
	262	help
	263	Say Y to enable support for the battery on Ingenic JZ4740 based
	264	boards.
	265
	266	This driver can be build as a module. If so, the module will be
	267	called jz4740-battery.
	268
6721081b NM	269	config BATTERY_INTEL_MID
	270	tristate "Battery driver for Intel MID platforms"
	271	depends on INTEL_SCU_IPC && SPI
	272	help
	273	Say Y here to enable the battery driver on Intel MID
	274	platforms.
	275
04930baf PR	276	config BATTERY_RX51
	277	tristate "Nokia RX-51 (N900) battery driver"
	278	depends on TWL4030_MADC
	279	help
	280	Say Y here to enable support for battery information on Nokia
	281	RX-51, also known as N900 tablet.
	282
ec46475f HK	283	config CHARGER_ISP1704
ec46475f HK	284	tristate "ISP1704 USB Charger Detection"
fd891498	285	depends on USB_PHY
ec46475f HK	286	help
	287	Say Y to enable support for USB Charger Detection with
	288	ISP1707/ISP1704 USB transceivers.
	289
b14a9ccc MH	290	config CHARGER_MAX8903
	291	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
	292	help
	293	Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
	294	The driver supports controlling charger-enable and current-limit
	295	pins based on the status of charger connections with interrupt
	296	handlers.
	297
2e727f17 GI	298	config CHARGER_TWL4030
	299	tristate "OMAP TWL4030 BCI charger driver"
	300	depends on TWL4030_CORE
	301	help
	302	Say Y here to enable support for TWL4030 Battery Charge Interface.
	303
2165c8a4	304	config CHARGER_LP8727
e39b828f	305	tristate "TI/National Semiconductor LP8727 charger driver"
2165c8a4 WK	306	depends on I2C
	307	help
	308	Say Y here to enable support for LP8727 Charger Driver.
	309
98a27664 KM	310	config CHARGER_LP8788
	311	tristate "TI LP8788 charger driver"
	312	depends on MFD_LP8788
	313	depends on LP8788_ADC
237a1b01	314	depends on IIO
98a27664 KM	315	help
	316	Say Y to enable support for the LP8788 linear charger.
	317
5070437c LPC	318	config CHARGER_GPIO
	319	tristate "GPIO charger"
	320	depends on GPIOLIB
	321	help
	322	Say Y to include support for chargers which report their online status
	323	through a GPIO pin.
	324
	325	This driver can be build as a module. If so, the module will be
	326	called gpio-charger.
	327
3bb3dbbd DK	328	config CHARGER_MANAGER
3bb3dbbd DK	329	bool "Battery charger manager for multiple chargers"
c1155c64	330	depends on REGULATOR
c4727555	331	select EXTCON
3bb3dbbd DK	332	help
	333	Say Y to enable charger-manager support, which allows multiple
	334	chargers attached to a battery and multiple batteries attached to a
	335	system. The charger-manager also can monitor charging status in
	336	runtime and in suspend-to-RAM by waking up the system periodically
	337	with help of suspend_again support.
	338
55e64701	339	config CHARGER_MAX14577
3682a8ee	340	tristate "Maxim MAX14577/77836 battery charger driver"
55e64701 KK	341	depends on MFD_MAX14577
	342	help
	343	Say Y to enable support for the battery charger control sysfs and
3682a8ee	344	platform data of MAX14577/77836 MUICs.
55e64701	345
87c2d906 KK	346	config CHARGER_MAX77693
	347	tristate "Maxim MAX77693 battery charger driver"
	348	depends on MFD_MAX77693
	349	help
	350	Say Y to enable support for the Maxim MAX77693 battery charger.
	351
149c077b DK	352	config CHARGER_MAX8997
	353	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
	354	depends on MFD_MAX8997 && REGULATOR_MAX8997
	355	help
	356	Say Y to enable support for the battery charger control sysfs and
	357	platform data of MAX8997/LP3974 PMICs.
	358
bb4ce970 DK	359	config CHARGER_MAX8998
	360	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
	361	depends on MFD_MAX8998 && REGULATOR_MAX8998
	362	help
	363	Say Y to enable support for the battery charger control sysfs and
	364	platform data of MAX8998/LP3974 PMICs.
	365
7ad85830 AV	366	config CHARGER_BQ2415X
	367	tristate "TI BQ2415x battery charger driver"
	368	depends on I2C
	369	help
	370	Say Y to enable support for the TI BQ2415x battery charger
	371	PMICs.
	372
	373	You'll need this driver to charge batteries on e.g. Nokia
	374	RX-51/N900.
	375
d7bf353f MG	376	config CHARGER_BQ24190
	377	tristate "TI BQ24190 battery charger driver"
	378	depends on I2C && GPIOLIB
	379	help
	380	Say Y to enable support for the TI BQ24190 battery charger.
	381
ce773992 DS	382	config CHARGER_BQ24735
	383	tristate "TI BQ24735 battery charger support"
	384	depends on I2C && GPIOLIB
	385	help
	386	Say Y to enable support for the TI BQ24735 battery charger.
	387
ed1a230f BR	388	config CHARGER_SMB347
	389	tristate "Summit Microelectronics SMB347 Battery Charger"
	390	depends on I2C
34298d40	391	select REGMAP_I2C
ed1a230f BR	392	help
	393	Say Y to include support for Summit Microelectronics SMB347
	394	Battery Charger.
	395
6f8da5df RK	396	config CHARGER_TPS65090
	397	tristate "TPS65090 battery charger driver"
	398	depends on MFD_TPS65090
	399	help
	400	Say Y here to enable support for battery charging with TPS65090
	401	PMIC chips.
	402
085bc24d ML	403	config BATTERY_GAUGE_LTC2941
	404	tristate "LTC2941/LTC2943 Battery Gauge Driver"
	405	depends on I2C
	406	help
	407	Say Y here to include support for LTC2941 and LTC2943 Battery
	408	Gauge IC. The driver reports the charge count continuously, and
	409	measures the voltage and temperature every 10 seconds.
	410
1f855824 AM	411	config AB8500_BM
	412	bool "AB8500 Battery Management Driver"
	413	depends on AB8500_CORE && AB8500_GPADC
	414	help
8b7d133c	415	Say Y to include support for AB8500 battery management.
1f855824	416
84d7b768 ML	417	config BATTERY_GOLDFISH
84d7b768 ML	418	tristate "Goldfish battery driver"
0244ad00	419	depends on GOLDFISH \|\| COMPILE_TEST
850bc4d5	420	depends on HAS_IOMEM
84d7b768 ML	421	help
	422	Say Y to enable support for the battery and AC power in the
	423	Goldfish emulator.
	424
b847dd96 BS	425	config BATTERY_RT5033
	426	tristate "RT5033 fuel gauge support"
	427	depends on MFD_RT5033
	428	help
	429	This adds support for battery fuel gauge in Richtek RT5033 PMIC.
	430	The fuelgauge calculates and determines the battery state of charge
	431	according to battery open circuit voltage.
	432
96ff0f5c JL	433	source "drivers/power/reset/Kconfig"
96ff0f5c JL	434
4a11b59d	435	endif # POWER_SUPPLY
21ff63ad JP	436
21ff63ad JP	437	source "drivers/power/avs/Kconfig"