[deliverable/linux.git] / drivers / power / reset / qnap-poweroff.c

/*
 * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
 *
 * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
 *
 * Based on the code from:
 *
 * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
 * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/serial_reg.h>
#include <linux/kallsyms.h>
#include <linux/of.h>
#include <linux/io.h>
#include <linux/clk.h>

#define UART1_REG(x)	(base + ((UART_##x) << 2))

struct power_off_cfg {
	u32 baud;
	char cmd;
};

static const struct power_off_cfg qnap_power_off_cfg = {
	.baud = 19200,
	.cmd = 'A',
};

static const struct power_off_cfg synology_power_off_cfg = {
	.baud = 9600,
	.cmd = '1',
};

static const struct of_device_id qnap_power_off_of_match_table[] = {
	{ .compatible = "qnap,power-off",
	  .data = &qnap_power_off_cfg,
	},
	{ .compatible = "synology,power-off",
	  .data = &synology_power_off_cfg,
	},
	{}
};
MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);

static void __iomem *base;
static unsigned long tclk;
static const struct power_off_cfg *cfg;

static void qnap_power_off(void)
{
	const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));

	pr_err("%s: triggering power-off...\n", __func__);

	/* hijack UART1 and reset into sane state */
	writel(0x83, UART1_REG(LCR));
	writel(divisor & 0xff, UART1_REG(DLL));
	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
	writel(0x03, UART1_REG(LCR));
	writel(0x00, UART1_REG(IER));
	writel(0x00, UART1_REG(FCR));
	writel(0x00, UART1_REG(MCR));

	/* send the power-off command to PIC */
	writel(cfg->cmd, UART1_REG(TX));
}

static int qnap_power_off_probe(struct platform_device *pdev)
{
	struct device_node *np = pdev->dev.of_node;
	struct resource *res;
	struct clk *clk;
	char symname[KSYM_NAME_LEN];

	const struct of_device_id *match =
		of_match_node(qnap_power_off_of_match_table, np);
	cfg = match->data;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		dev_err(&pdev->dev, "Missing resource");
		return -EINVAL;
	}

	base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
	if (!base) {
		dev_err(&pdev->dev, "Unable to map resource");
		return -EINVAL;
	}

	/* We need to know tclk in order to calculate the UART divisor */
	clk = devm_clk_get(&pdev->dev, NULL);
	if (IS_ERR(clk)) {
		dev_err(&pdev->dev, "Clk missing");
		return PTR_ERR(clk);
	}

	tclk = clk_get_rate(clk);

	/* Check that nothing else has already setup a handler */
	if (pm_power_off) {
		lookup_symbol_name((ulong)pm_power_off, symname);
		dev_err(&pdev->dev,
			"pm_power_off already claimed %p %s",
			pm_power_off, symname);
		return -EBUSY;
	}
	pm_power_off = qnap_power_off;

	return 0;
}

static int qnap_power_off_remove(struct platform_device *pdev)
{
	pm_power_off = NULL;
	return 0;
}

static struct platform_driver qnap_power_off_driver = {
	.probe	= qnap_power_off_probe,
	.remove	= qnap_power_off_remove,
	.driver	= {
		.name	= "qnap_power_off",
		.of_match_table = of_match_ptr(qnap_power_off_of_match_table),
	},
};
module_platform_driver(qnap_power_off_driver);

MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
MODULE_DESCRIPTION("QNAP Power off driver");
MODULE_LICENSE("GPL v2");
Commit	Line	Data
e8fc721a	1	/*
200c0a3e	2	* QNAP Turbo NAS Board power off. Can also be used on Synology devices.
e8fc721a AL	3	*
	4	* Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
	5	*
	6	* Based on the code from:
	7	*
	8	* Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
	9	* Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
	10	*
	11	* This program is free software; you can redistribute it and/or
	12	* modify it under the terms of the GNU General Public License
	13	* as published by the Free Software Foundation; either version
	14	* 2 of the License, or (at your option) any later version.
	15	*/
	16
	17	#include <linux/kernel.h>
	18	#include <linux/module.h>
	19	#include <linux/platform_device.h>
	20	#include <linux/serial_reg.h>
	21	#include <linux/kallsyms.h>
	22	#include <linux/of.h>
	23	#include <linux/io.h>
	24	#include <linux/clk.h>
	25
	26	#define UART1_REG(x) (base + ((UART_##x) << 2))
	27
200c0a3e AL	28	struct power_off_cfg {
	29	u32 baud;
	30	char cmd;
	31	};
	32
	33	static const struct power_off_cfg qnap_power_off_cfg = {
	34	.baud = 19200,
	35	.cmd = 'A',
	36	};
	37
	38	static const struct power_off_cfg synology_power_off_cfg = {
	39	.baud = 9600,
	40	.cmd = '1',
	41	};
	42
	43	static const struct of_device_id qnap_power_off_of_match_table[] = {
	44	{ .compatible = "qnap,power-off",
	45	.data = &qnap_power_off_cfg,
	46	},
	47	{ .compatible = "synology,power-off",
	48	.data = &synology_power_off_cfg,
	49	},
	50	{}
	51	};
	52	MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
	53
e8fc721a AL	54	static void __iomem *base;
e8fc721a AL	55	static unsigned long tclk;
200c0a3e	56	static const struct power_off_cfg *cfg;
e8fc721a AL	57
	58	static void qnap_power_off(void)
	59	{
200c0a3e	60	const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
e8fc721a AL	61
	62	pr_err("%s: triggering power-off...\n", __func__);
	63
200c0a3e	64	/* hijack UART1 and reset into sane state */
e8fc721a AL	65	writel(0x83, UART1_REG(LCR));
	66	writel(divisor & 0xff, UART1_REG(DLL));
	67	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
	68	writel(0x03, UART1_REG(LCR));
	69	writel(0x00, UART1_REG(IER));
	70	writel(0x00, UART1_REG(FCR));
	71	writel(0x00, UART1_REG(MCR));
	72
200c0a3e AL	73	/* send the power-off command to PIC */
200c0a3e AL	74	writel(cfg->cmd, UART1_REG(TX));
e8fc721a AL	75	}
	76
	77	static int qnap_power_off_probe(struct platform_device *pdev)
	78	{
200c0a3e	79	struct device_node *np = pdev->dev.of_node;
e8fc721a AL	80	struct resource *res;
	81	struct clk *clk;
	82	char symname[KSYM_NAME_LEN];
	83
200c0a3e AL	84	const struct of_device_id *match =
	85	of_match_node(qnap_power_off_of_match_table, np);
	86	cfg = match->data;
	87
e8fc721a AL	88	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	89	if (!res) {
	90	dev_err(&pdev->dev, "Missing resource");
	91	return -EINVAL;
	92	}
	93
	94	base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
	95	if (!base) {
	96	dev_err(&pdev->dev, "Unable to map resource");
	97	return -EINVAL;
	98	}
	99
	100	/* We need to know tclk in order to calculate the UART divisor */
	101	clk = devm_clk_get(&pdev->dev, NULL);
	102	if (IS_ERR(clk)) {
	103	dev_err(&pdev->dev, "Clk missing");
	104	return PTR_ERR(clk);
	105	}
	106
	107	tclk = clk_get_rate(clk);
	108
	109	/* Check that nothing else has already setup a handler */
	110	if (pm_power_off) {
	111	lookup_symbol_name((ulong)pm_power_off, symname);
	112	dev_err(&pdev->dev,
	113	"pm_power_off already claimed %p %s",
	114	pm_power_off, symname);
	115	return -EBUSY;
	116	}
	117	pm_power_off = qnap_power_off;
	118
	119	return 0;
	120	}
	121
	122	static int qnap_power_off_remove(struct platform_device *pdev)
	123	{
	124	pm_power_off = NULL;
	125	return 0;
	126	}
	127
e8fc721a AL	128	static struct platform_driver qnap_power_off_driver = {
	129	.probe = qnap_power_off_probe,
	130	.remove = qnap_power_off_remove,
	131	.driver = {
e8fc721a AL	132	.name = "qnap_power_off",
	133	.of_match_table = of_match_ptr(qnap_power_off_of_match_table),
	134	},
	135	};
	136	module_platform_driver(qnap_power_off_driver);
	137
	138	MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
	139	MODULE_DESCRIPTION("QNAP Power off driver");
8fd526fd	140	MODULE_LICENSE("GPL v2");