Commit | Line | Data |
---|---|---|
bbda14df | 1 | menuconfig REGULATOR |
ba7e4763 | 2 | bool "Voltage and Current Regulator Support" |
ba7e4763 LG |
3 | help |
4 | Generic Voltage and Current Regulator support. | |
5 | ||
6 | This framework is designed to provide a generic interface to voltage | |
7 | and current regulators within the Linux kernel. It's intended to | |
8 | provide voltage and current control to client or consumer drivers and | |
9 | also provide status information to user space applications through a | |
10 | sysfs interface. | |
11 | ||
12 | The intention is to allow systems to dynamically control regulator | |
13 | output in order to save power and prolong battery life. This applies | |
14 | to both voltage regulators (where voltage output is controllable) and | |
15 | current sinks (where current output is controllable). | |
16 | ||
17 | This framework safely compiles out if not selected so that client | |
18 | drivers can still be used in systems with no software controllable | |
19 | regulators. | |
20 | ||
21 | If unsure, say no. | |
22 | ||
809d310c | 23 | |
bbda14df TI |
24 | if REGULATOR |
25 | ||
ba7e4763 LG |
26 | config REGULATOR_DEBUG |
27 | bool "Regulator debug support" | |
ba7e4763 LG |
28 | help |
29 | Say yes here to enable debugging support. | |
30 | ||
31 | config REGULATOR_FIXED_VOLTAGE | |
a9cb63b2 | 32 | tristate "Fixed voltage regulator support" |
a9cb63b2 MB |
33 | help |
34 | This driver provides support for fixed voltage regulators, | |
35 | useful for systems which use a combination of software | |
36 | managed regulators and simple non-configurable regulators. | |
ba7e4763 LG |
37 | |
38 | config REGULATOR_VIRTUAL_CONSUMER | |
39 | tristate "Virtual regulator consumer support" | |
ba7e4763 LG |
40 | help |
41 | This driver provides a virtual consumer for the voltage and | |
c6d678b6 MJ |
42 | current regulator API which provides sysfs controls for |
43 | configuring the supplies requested. This is mainly useful | |
44 | for test purposes. | |
ba7e4763 | 45 | |
c6d678b6 | 46 | If unsure, say no. |
ba7e4763 | 47 | |
1d98cccf MR |
48 | config REGULATOR_USERSPACE_CONSUMER |
49 | tristate "Userspace regulator consumer support" | |
1d98cccf MR |
50 | help |
51 | There are some classes of devices that are controlled entirely | |
6f2653e6 | 52 | from user space. Userspace consumer driver provides ability to |
1d98cccf MR |
53 | control power supplies for such devices. |
54 | ||
c6d678b6 | 55 | If unsure, say no. |
1d98cccf | 56 | |
95f1dc08 CX |
57 | config REGULATOR_88PM800 |
58 | tristate "Marvell 88PM800 Power regulators" | |
7c45f60b | 59 | depends on MFD_88PM800 |
95f1dc08 CX |
60 | help |
61 | This driver supports Marvell 88PM800 voltage regulator chips. | |
62 | It delivers digitally programmable output, | |
63 | the voltage is programmed via I2C interface. | |
64 | It's suitable to support PXA988 chips to control VCC_MAIN and | |
65 | various voltages. | |
66 | ||
82b736df | 67 | config REGULATOR_88PM8607 |
631a1fc4 | 68 | tristate "Marvell 88PM8607 Power regulators" |
82b736df | 69 | depends on MFD_88PM860X=y |
3f0292ae | 70 | help |
82b736df | 71 | This driver supports 88PM8607 voltage regulator chips. |
3f0292ae | 72 | |
33036f48 WY |
73 | config REGULATOR_ACT8865 |
74 | tristate "Active-semi act8865 voltage regulator" | |
75 | depends on I2C | |
76 | select REGMAP_I2C | |
77 | help | |
78 | This driver controls a active-semi act8865 voltage output | |
79 | regulator via I2C bus. | |
80 | ||
dfb9b8a4 AL |
81 | config REGULATOR_AD5398 |
82 | tristate "Analog Devices AD5398/AD5821 regulators" | |
83 | depends on I2C | |
0eb5d5ab | 84 | help |
dfb9b8a4 AL |
85 | This driver supports AD5398 and AD5821 current regulator chips. |
86 | If building into module, its name is ad5398.ko. | |
87 | ||
82b736df MB |
88 | config REGULATOR_ANATOP |
89 | tristate "Freescale i.MX on-chip ANATOP LDO regulators" | |
90 | depends on MFD_SYSCON | |
91 | help | |
92 | Say y here to support Freescale i.MX on-chip ANATOP LDOs | |
93 | regulators. It is recommended that this option be | |
94 | enabled on i.MX6 platform. | |
95 | ||
dfb9b8a4 AL |
96 | config REGULATOR_AAT2870 |
97 | tristate "AnalogicTech AAT2870 Regulators" | |
98 | depends on MFD_AAT2870_CORE | |
99 | help | |
100 | If you have a AnalogicTech AAT2870 say Y to enable the | |
101 | regulator driver. | |
102 | ||
82b736df MB |
103 | config REGULATOR_AB3100 |
104 | tristate "ST-Ericsson AB3100 Regulator functions" | |
105 | depends on AB3100_CORE | |
106 | default y if AB3100_CORE | |
107 | help | |
108 | These regulators correspond to functionality in the | |
109 | AB3100 analog baseband dealing with power regulators | |
110 | for the system. | |
111 | ||
112 | config REGULATOR_AB8500 | |
113 | bool "ST-Ericsson AB8500 Power Regulators" | |
114 | depends on AB8500_CORE | |
115 | help | |
116 | This driver supports the regulators found on the ST-Ericsson mixed | |
117 | signal AB8500 PMIC | |
118 | ||
b667a45d MB |
119 | config REGULATOR_ARIZONA |
120 | tristate "Wolfson Arizona class devices" | |
121 | depends on MFD_ARIZONA | |
e6ed9058 | 122 | depends on SND_SOC |
b667a45d MB |
123 | help |
124 | Support for the regulators found on Wolfson Arizona class | |
125 | devices. | |
126 | ||
82b736df MB |
127 | config REGULATOR_AS3711 |
128 | tristate "AS3711 PMIC" | |
129 | depends on MFD_AS3711 | |
130 | help | |
131 | This driver provides support for the voltage regulators on the | |
132 | AS3711 PMIC | |
133 | ||
bc407334 LD |
134 | config REGULATOR_AS3722 |
135 | tristate "AMS AS3722 PMIC Regulators" | |
136 | depends on MFD_AS3722 | |
137 | help | |
138 | This driver provides support for the voltage regulators on the | |
139 | AS3722 PMIC. This will enable support for all the software | |
140 | controllable DCDC/LDO regulators. | |
141 | ||
dfe7a1b0 CC |
142 | config REGULATOR_AXP20X |
143 | tristate "X-POWERS AXP20X PMIC Regulators" | |
144 | depends on MFD_AXP20X | |
145 | help | |
146 | This driver provides support for the voltage regulators on the | |
147 | AXP20X PMIC. | |
148 | ||
462c9fc5 MP |
149 | config REGULATOR_BCM590XX |
150 | tristate "Broadcom BCM590xx PMU Regulators" | |
151 | depends on MFD_BCM590XX | |
152 | help | |
153 | This driver provides support for the voltage regulators on the | |
154 | BCM590xx PMUs. This will enable support for the software | |
155 | controllable LDO/Switching regulators. | |
156 | ||
dfb9b8a4 AL |
157 | config REGULATOR_DA903X |
158 | tristate "Dialog Semiconductor DA9030/DA9034 regulators" | |
159 | depends on PMIC_DA903X | |
160 | help | |
161 | Say y here to support the BUCKs and LDOs regulators found on | |
162 | Dialog Semiconductor DA9030/DA9034 PMIC. | |
163 | ||
164 | config REGULATOR_DA9052 | |
165 | tristate "Dialog Semiconductor DA9052/DA9053 regulators" | |
166 | depends on PMIC_DA9052 | |
167 | help | |
168 | This driver supports the voltage regulators of DA9052-BC and | |
169 | DA9053-AA/Bx PMIC. | |
170 | ||
f6130be6 AJ |
171 | config REGULATOR_DA9055 |
172 | tristate "Dialog Semiconductor DA9055 regulators" | |
173 | depends on MFD_DA9055 | |
174 | help | |
175 | Say y here to support the BUCKs and LDOs regulators found on | |
176 | Dialog Semiconductor DA9055 PMIC. | |
177 | ||
178 | This driver can also be built as a module. If so, the module | |
179 | will be called da9055-regulator. | |
180 | ||
4068e518 T |
181 | config REGULATOR_DA9062 |
182 | tristate "Dialog Semiconductor DA9062 regulators" | |
183 | depends on MFD_DA9062 | |
184 | help | |
185 | Say y here to support the BUCKs and LDOs regulators found on | |
186 | DA9062 PMICs. | |
187 | ||
188 | This driver can also be built as a module. If so, the module | |
189 | will be called da9062-regulator. | |
190 | ||
69ca3e58 KG |
191 | config REGULATOR_DA9063 |
192 | tristate "Dialog Semiconductor DA9063 regulators" | |
193 | depends on MFD_DA9063 | |
194 | help | |
195 | Say y here to support the BUCKs and LDOs regulators found on | |
196 | DA9063 PMICs. | |
197 | ||
198 | This driver can also be built as a module. If so, the module | |
199 | will be called da9063-regulator. | |
200 | ||
16f10918 ST |
201 | config REGULATOR_DA9210 |
202 | tristate "Dialog Semiconductor DA9210 regulator" | |
203 | depends on I2C | |
204 | select REGMAP_I2C | |
205 | help | |
206 | Say y here to support for the Dialog Semiconductor DA9210. | |
207 | The DA9210 is a multi-phase synchronous step down | |
208 | converter 12A DC-DC Buck controlled through an I2C | |
1028a37d JB |
209 | interface. |
210 | ||
211 | config REGULATOR_DA9211 | |
7bd39354 | 212 | tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator" |
1028a37d JB |
213 | depends on I2C |
214 | select REGMAP_I2C | |
215 | help | |
005547e0 | 216 | Say y here to support for the Dialog Semiconductor DA9211/DA9212 |
7bd39354 JB |
217 | /DA9213/DA9214/DA9215. |
218 | The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous | |
005547e0 | 219 | step down converter 12A or 16A DC-DC Buck controlled through an I2C |
16f10918 ST |
220 | interface. |
221 | ||
82b736df MB |
222 | config REGULATOR_DBX500_PRCMU |
223 | bool | |
224 | ||
225 | config REGULATOR_DB8500_PRCMU | |
226 | bool "ST-Ericsson DB8500 Voltage Domain Regulators" | |
227 | depends on MFD_DB8500_PRCMU | |
228 | select REGULATOR_DBX500_PRCMU | |
229 | help | |
230 | This driver supports the voltage domain regulators controlled by the | |
231 | DB8500 PRCMU | |
232 | ||
49d8c599 YZ |
233 | config REGULATOR_FAN53555 |
234 | tristate "Fairchild FAN53555 Regulator" | |
235 | depends on I2C | |
236 | select REGMAP_I2C | |
237 | help | |
238 | This driver supports Fairchild FAN53555 Digitally Programmable | |
239 | TinyBuck Regulator. The FAN53555 is a step-down switching voltage | |
240 | regulator that delivers a digitally programmable output from an | |
241 | input voltage supply of 2.5V to 5.5V. The output voltage is | |
242 | programmed through an I2C interface. | |
243 | ||
82b736df MB |
244 | config REGULATOR_GPIO |
245 | tristate "GPIO regulator support" | |
9eac5fdf | 246 | depends on GPIOLIB || COMPILE_TEST |
e3e5aff7 | 247 | help |
82b736df MB |
248 | This driver provides support for regulators that can be |
249 | controlled via gpios. | |
250 | It is capable of supporting current and voltage regulators | |
251 | and the platform has to provide a mapping of GPIO-states | |
252 | to target volts/amps. | |
e3e5aff7 | 253 | |
87ca186f GX |
254 | config REGULATOR_HI6421 |
255 | tristate "HiSilicon Hi6421 PMIC voltage regulator support" | |
256 | depends on MFD_HI6421_PMIC && OF | |
257 | help | |
258 | This driver provides support for the voltage regulators on the | |
259 | HiSilicon Hi6421 PMU / Codec IC. | |
260 | Hi6421 is a multi-function device which, on regulator part, provides | |
261 | 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All | |
262 | of them come with support to either ECO (idle) or sleep mode. | |
263 | ||
dec38b5c MB |
264 | config REGULATOR_ISL9305 |
265 | tristate "Intersil ISL9305 regulator" | |
266 | depends on I2C | |
ba441ec2 | 267 | select REGMAP_I2C |
dec38b5c MB |
268 | help |
269 | This driver supports ISL9305 voltage regulator chip. | |
270 | ||
82b736df MB |
271 | config REGULATOR_ISL6271A |
272 | tristate "Intersil ISL6271A Power regulator" | |
273 | depends on I2C | |
274 | help | |
275 | This driver supports ISL6271A voltage regulator chip. | |
dfb9b8a4 | 276 | |
3a8d1a73 MK |
277 | config REGULATOR_LM363X |
278 | tristate "TI LM363X voltage regulators" | |
279 | depends on MFD_TI_LMU | |
280 | help | |
281 | This driver supports LM3631 and LM3632 voltage regulators for | |
282 | the LCD bias. | |
283 | One boost output voltage is configurable and always on. | |
284 | Other LDOs are used for the display module. | |
285 | ||
82b736df MB |
286 | config REGULATOR_LP3971 |
287 | tristate "National Semiconductors LP3971 PMIC regulator driver" | |
288 | depends on I2C | |
dfb9b8a4 | 289 | help |
82b736df MB |
290 | Say Y here to support the voltage regulators and convertors |
291 | on National Semiconductors LP3971 PMIC | |
dfb9b8a4 | 292 | |
82b736df MB |
293 | config REGULATOR_LP3972 |
294 | tristate "National Semiconductors LP3972 PMIC regulator driver" | |
295 | depends on I2C | |
dfb9b8a4 | 296 | help |
82b736df MB |
297 | Say Y here to support the voltage regulators and convertors |
298 | on National Semiconductors LP3972 PMIC | |
dfb9b8a4 | 299 | |
82b736df | 300 | config REGULATOR_LP872X |
631a1fc4 | 301 | tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" |
613965fb | 302 | depends on I2C |
82b736df MB |
303 | select REGMAP_I2C |
304 | help | |
305 | This driver supports LP8720/LP8725 PMIC | |
306 | ||
307 | config REGULATOR_LP8755 | |
308 | tristate "TI LP8755 High Performance PMU driver" | |
dfb9b8a4 | 309 | depends on I2C |
82b736df | 310 | select REGMAP_I2C |
dfb9b8a4 | 311 | help |
82b736df MB |
312 | This driver supports LP8755 High Performance PMU driver. This |
313 | chip contains six step-down DC/DC converters which can support | |
314 | 9 mode multiphase configuration. | |
dfb9b8a4 | 315 | |
82b736df | 316 | config REGULATOR_LP8788 |
631a1fc4 | 317 | tristate "TI LP8788 Power Regulators" |
82b736df | 318 | depends on MFD_LP8788 |
dfb9b8a4 | 319 | help |
82b736df | 320 | This driver supports LP8788 voltage regulator chip. |
0eb5d5ab | 321 | |
3eb2c7ec | 322 | config REGULATOR_LTC3589 |
ac1d6868 AL |
323 | tristate "LTC3589 8-output voltage regulator" |
324 | depends on I2C | |
325 | select REGMAP_I2C | |
3eb2c7ec PZ |
326 | help |
327 | This enables support for the LTC3589, LTC3589-1, and LTC3589-2 | |
328 | 8-output regulators controlled via I2C. | |
329 | ||
b0902bbe | 330 | config REGULATOR_MAX14577 |
8a82b408 | 331 | tristate "Maxim 14577/77836 regulator" |
b0902bbe KK |
332 | depends on MFD_MAX14577 |
333 | help | |
8a82b408 KK |
334 | This driver controls a Maxim MAX14577/77836 regulator via I2C bus. |
335 | The MAX14577 regulators include safeout LDO and charger current | |
336 | regulator. The MAX77836 has two additional LDOs. | |
b0902bbe | 337 | |
55f4fa4e RJ |
338 | config REGULATOR_MAX1586 |
339 | tristate "Maxim 1586/1587 voltage regulator" | |
340 | depends on I2C | |
55f4fa4e RJ |
341 | help |
342 | This driver controls a Maxim 1586 or 1587 voltage output | |
343 | regulator via I2C bus. The provided regulator is suitable | |
344 | for PXA27x chips to control VCC_CORE and VCC_USIM voltages. | |
345 | ||
a71b797f HZ |
346 | config REGULATOR_MAX8649 |
347 | tristate "Maxim 8649 voltage regulator" | |
348 | depends on I2C | |
c5b68d47 | 349 | select REGMAP_I2C |
a71b797f HZ |
350 | help |
351 | This driver controls a Maxim 8649 voltage output regulator via | |
352 | I2C bus. | |
353 | ||
27f37e4b WS |
354 | config REGULATOR_MAX8660 |
355 | tristate "Maxim 8660/8661 voltage regulator" | |
356 | depends on I2C | |
357 | help | |
358 | This driver controls a Maxim 8660/8661 voltage output | |
359 | regulator via I2C bus. | |
360 | ||
ffee1909 GY |
361 | config REGULATOR_MAX8907 |
362 | tristate "Maxim 8907 voltage regulator" | |
363 | depends on MFD_MAX8907 | |
364 | help | |
365 | This driver controls a Maxim 8907 voltage output regulator | |
366 | via I2C bus. The provided regulator is suitable for Tegra | |
367 | chip to control Step-Down DC-DC and LDOs. | |
368 | ||
08ff6f2a HZ |
369 | config REGULATOR_MAX8925 |
370 | tristate "Maxim MAX8925 Power Management IC" | |
371 | depends on MFD_MAX8925 | |
372 | help | |
373 | Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. | |
374 | ||
202f4f53 MH |
375 | config REGULATOR_MAX8952 |
376 | tristate "Maxim MAX8952 Power Management IC" | |
377 | depends on I2C | |
378 | help | |
379 | This driver controls a Maxim 8952 voltage output regulator | |
380 | via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS | |
381 | modes ranging from 0.77V to 1.40V by 0.01V steps. | |
382 | ||
5928f538 LD |
383 | config REGULATOR_MAX8973 |
384 | tristate "Maxim MAX8973 voltage regulator " | |
385 | depends on I2C | |
386 | select REGMAP_I2C | |
387 | help | |
388 | The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down | |
389 | switching regulator delievers up to 9A of output current. Each | |
390 | phase operates at a 2MHz fixed frequency with a 120 deg shift | |
391 | from the adjacent phase, allowing the use of small magnetic component. | |
392 | ||
bd6ca2cf MH |
393 | config REGULATOR_MAX8997 |
394 | tristate "Maxim 8997/8966 regulator" | |
395 | depends on MFD_MAX8997 | |
396 | help | |
397 | This driver controls a Maxim 8997/8966 regulator | |
398 | via I2C bus. The provided regulator is suitable for S5PC110, | |
399 | S5PV210, and Exynos-4 chips to control VCC_CORE and | |
400 | VCC_USIM voltages. | |
401 | ||
156f2528 KP |
402 | config REGULATOR_MAX8998 |
403 | tristate "Maxim 8998 voltage regulator" | |
69f71008 | 404 | depends on MFD_MAX8998 |
156f2528 KP |
405 | help |
406 | This driver controls a Maxim 8998 voltage output regulator | |
407 | via I2C bus. The provided regulator is suitable for S3C6410 | |
408 | and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. | |
409 | ||
133d4016 JL |
410 | config REGULATOR_MAX77686 |
411 | tristate "Maxim 77686 regulator" | |
412 | depends on MFD_MAX77686 | |
413 | help | |
414 | This driver controls a Maxim 77686 regulator | |
415 | via I2C bus. The provided regulator is suitable for | |
416 | Exynos-4 chips to control VARM and VINT voltages. | |
417 | ||
80b022e2 | 418 | config REGULATOR_MAX77693 |
9e9a08e8 KK |
419 | tristate "Maxim 77693/77843 regulator" |
420 | depends on (MFD_MAX77693 || MFD_MAX77843) | |
80b022e2 | 421 | help |
9e9a08e8 | 422 | This driver controls a Maxim 77693/77843 regulators via I2C bus. |
80b022e2 JL |
423 | The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' |
424 | and one current regulator 'CHARGER'. This is suitable for | |
9e9a08e8 | 425 | Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips. |
80b022e2 | 426 | |
e6f2f805 JMC |
427 | config REGULATOR_MAX77802 |
428 | tristate "Maxim 77802 regulator" | |
429 | depends on MFD_MAX77686 | |
430 | help | |
431 | This driver controls a Maxim 77802 regulator | |
432 | via I2C bus. The provided regulator is suitable for | |
433 | Exynos5420/Exynos5800 SoCs to control various voltages. | |
434 | It includes support for control of voltage and ramp speed. | |
435 | ||
82b736df MB |
436 | config REGULATOR_MC13XXX_CORE |
437 | tristate | |
5ec271e7 | 438 | |
82b736df MB |
439 | config REGULATOR_MC13783 |
440 | tristate "Freescale MC13783 regulator driver" | |
e5a3da21 | 441 | depends on MFD_MC13XXX |
82b736df | 442 | select REGULATOR_MC13XXX_CORE |
0cbdf7bc | 443 | help |
82b736df MB |
444 | Say y here to support the regulators found on the Freescale MC13783 |
445 | PMIC. | |
0cbdf7bc | 446 | |
82b736df MB |
447 | config REGULATOR_MC13892 |
448 | tristate "Freescale MC13892 regulator driver" | |
449 | depends on MFD_MC13XXX | |
450 | select REGULATOR_MC13XXX_CORE | |
5976f095 | 451 | help |
82b736df MB |
452 | Say y here to support the regulators found on the Freescale MC13892 |
453 | PMIC. | |
5976f095 | 454 | |
8766018b HC |
455 | config REGULATOR_MT6311 |
456 | tristate "MediaTek MT6311 PMIC" | |
457 | depends on I2C | |
aab3c3f3 | 458 | select REGMAP_I2C |
8766018b HC |
459 | help |
460 | Say y here to select this option to enable the power regulator of | |
461 | MediaTek MT6311 PMIC. | |
462 | This driver supports the control of different power rails of device | |
463 | through regulator interface. | |
464 | ||
0425e242 FF |
465 | config REGULATOR_MT6397 |
466 | tristate "MediaTek MT6397 PMIC" | |
467 | depends on MFD_MT6397 | |
468 | help | |
469 | Say y here to select this option to enable the power regulator of | |
470 | MediaTek MT6397 PMIC. | |
471 | This driver supports the control of different power rails of device | |
472 | through regulator interface. | |
473 | ||
82b736df MB |
474 | config REGULATOR_PALMAS |
475 | tristate "TI Palmas PMIC Regulators" | |
476 | depends on MFD_PALMAS | |
af8b5fc3 | 477 | help |
82b736df MB |
478 | If you wish to control the regulators on the Palmas series of |
479 | chips say Y here. This will enable support for all the software | |
480 | controllable SMPS/LDO regulators. | |
af8b5fc3 | 481 | |
82b736df MB |
482 | The regulators available on Palmas series chips vary depending |
483 | on the muxing. This is handled automatically in the driver by | |
484 | reading the mux info from OTP. | |
b59320cc | 485 | |
11469e0b B |
486 | config REGULATOR_PBIAS |
487 | tristate "PBIAS OMAP regulator driver" | |
488 | depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON | |
489 | help | |
490 | Say y here to support pbias regulator for mmc1:SD card i/o | |
491 | on OMAP SoCs. | |
492 | This driver provides support for OMAP pbias modelled | |
493 | regulators. | |
494 | ||
82b736df MB |
495 | config REGULATOR_PCAP |
496 | tristate "Motorola PCAP2 regulator driver" | |
497 | depends on EZX_PCAP | |
ade7515f | 498 | help |
82b736df MB |
499 | This driver provides support for the voltage regulators of the |
500 | PCAP2 PMIC. | |
ade7515f | 501 | |
dfb9b8a4 AL |
502 | config REGULATOR_PCF50633 |
503 | tristate "NXP PCF50633 regulator driver" | |
c6d678b6 | 504 | depends on MFD_PCF50633 |
295c08bc | 505 | help |
dfb9b8a4 AL |
506 | Say Y here to support the voltage regulators and convertors |
507 | on PCF50633 | |
295c08bc | 508 | |
3784b6d6 | 509 | config REGULATOR_PFUZE100 |
2cee2121 | 510 | tristate "Freescale PFUZE100/PFUZE200 regulator driver" |
3784b6d6 | 511 | depends on I2C |
94421b05 | 512 | select REGMAP_I2C |
3784b6d6 | 513 | help |
2cee2121 AL |
514 | Say y here to support the regulators found on the Freescale |
515 | PFUZE100/PFUZE200 PMIC. | |
3784b6d6 | 516 | |
f307a7e9 JB |
517 | config REGULATOR_PV88060 |
518 | tristate "Powerventure Semiconductor PV88060 regulator" | |
519 | depends on I2C | |
520 | select REGMAP_I2C | |
521 | help | |
522 | Say y here to support the voltage regulators and convertors | |
523 | PV88060 | |
524 | ||
c90456e3 JB |
525 | config REGULATOR_PV88090 |
526 | tristate "Powerventure Semiconductor PV88090 regulator" | |
527 | depends on I2C | |
528 | select REGMAP_I2C | |
529 | help | |
530 | Say y here to support the voltage regulators and convertors | |
531 | on PV88090 | |
532 | ||
aa66cc66 CZ |
533 | config REGULATOR_PWM |
534 | tristate "PWM voltage regulator" | |
535 | depends on PWM | |
536 | help | |
537 | This driver supports PWM controlled voltage regulators. PWM | |
538 | duty cycle can increase or decrease the voltage. | |
539 | ||
2720386e BA |
540 | config REGULATOR_QCOM_RPM |
541 | tristate "Qualcomm RPM regulator driver" | |
542 | depends on MFD_QCOM_RPM | |
543 | help | |
544 | If you say yes to this option, support will be included for the | |
545 | regulators exposed by the Resource Power Manager found in Qualcomm | |
546 | 8660, 8960 and 8064 based devices. | |
547 | ||
548 | Say M here if you want to include support for the regulators on the | |
549 | Qualcomm RPM as a module. The module will be named | |
550 | "qcom_rpm-regulator". | |
551 | ||
da65e367 BA |
552 | config REGULATOR_QCOM_SMD_RPM |
553 | tristate "Qualcomm SMD based RPM regulator driver" | |
554 | depends on QCOM_SMD_RPM | |
555 | help | |
556 | If you say yes to this option, support will be included for the | |
557 | regulators exposed by the Resource Power Manager found in Qualcomm | |
558 | 8974 based devices. | |
559 | ||
560 | Say M here if you want to include support for the regulators on the | |
561 | Qualcomm RPM as a module. The module will be named | |
562 | "qcom_smd-regulator". | |
563 | ||
e92a4047 SB |
564 | config REGULATOR_QCOM_SPMI |
565 | tristate "Qualcomm SPMI regulator driver" | |
566 | depends on SPMI || COMPILE_TEST | |
567 | help | |
568 | If you say yes to this option, support will be included for the | |
569 | regulators found in Qualcomm SPMI PMICs. | |
570 | ||
571 | Say M here if you want to include support for the regulators on the | |
572 | Qualcomm SPMI PMICs as a module. The module will be named | |
573 | "qcom_spmi-regulator". | |
574 | ||
6ffc3270 LD |
575 | config REGULATOR_RC5T583 |
576 | tristate "RICOH RC5T583 Power regulators" | |
577 | depends on MFD_RC5T583 | |
578 | help | |
579 | Select this option to enable the power regulator of RICOH | |
580 | PMIC RC5T583. | |
581 | This driver supports the control of different power rails of device | |
582 | through regulator interface. The device supports multiple DCDC/LDO | |
583 | outputs which can be controlled by i2c communication. | |
584 | ||
2cd64ae3 CZ |
585 | config REGULATOR_RK808 |
586 | tristate "Rockchip RK808 Power regulators" | |
587 | depends on MFD_RK808 | |
588 | help | |
589 | Select this option to enable the power regulator of ROCKCHIP | |
590 | PMIC RK808. | |
591 | This driver supports the control of different power rails of device | |
592 | through regulator interface. The device supports multiple DCDC/LDO | |
593 | outputs which can be controlled by i2c communication. | |
594 | ||
811b7006 BG |
595 | config REGULATOR_RN5T618 |
596 | tristate "Ricoh RN5T618 voltage regulators" | |
597 | depends on MFD_RN5T618 | |
598 | help | |
599 | Say y here to support the regulators found on Ricoh RN5T618 PMIC. | |
600 | ||
b1917578 BS |
601 | config REGULATOR_RT5033 |
602 | tristate "Richtek RT5033 Regulators" | |
603 | depends on MFD_RT5033 | |
604 | help | |
605 | This adds support for voltage and current regulators in Richtek | |
606 | RT5033 PMIC. The device supports multiple regulators like | |
607 | current source, LDO and Buck. | |
608 | ||
f1879271 SK |
609 | config REGULATOR_S2MPA01 |
610 | tristate "Samsung S2MPA01 voltage regulator" | |
611 | depends on MFD_SEC_CORE | |
612 | help | |
613 | This driver controls Samsung S2MPA01 voltage output regulator | |
614 | via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. | |
615 | ||
cb74685e | 616 | config REGULATOR_S2MPS11 |
51af2067 | 617 | tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator" |
cb74685e SK |
618 | depends on MFD_SEC_CORE |
619 | help | |
51af2067 | 620 | This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage |
76b9840b CC |
621 | output regulator via I2C bus. The chip is comprised of high efficient |
622 | Buck converters including Dual-Phase Buck converter, Buck-Boost | |
623 | converter, various LDOs. | |
cb74685e | 624 | |
dfb9b8a4 AL |
625 | config REGULATOR_S5M8767 |
626 | tristate "Samsung S5M8767A voltage regulator" | |
66c9fbb9 | 627 | depends on MFD_SEC_CORE |
5e428d5c | 628 | help |
dfb9b8a4 AL |
629 | This driver supports a Samsung S5M8767A voltage output regulator |
630 | via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and | |
631 | supports DVS mode with 8bits of output voltage control. | |
5e428d5c | 632 | |
9839d627 GY |
633 | config REGULATOR_SKY81452 |
634 | tristate "Skyworks Solutions SKY81452 voltage regulator" | |
70b5b27c | 635 | depends on MFD_SKY81452 |
4a5d3013 | 636 | help |
9839d627 GY |
637 | This driver supports Skyworks SKY81452 voltage output regulator |
638 | via I2C bus. SKY81452 has one voltage linear regulator can be | |
639 | programmed from 4.5V to 20V. | |
640 | ||
641 | This driver can also be built as a module. If so, the module | |
642 | will be called sky81452-regulator. | |
4a5d3013 | 643 | |
82b736df | 644 | config REGULATOR_TI_ABB |
631a1fc4 | 645 | tristate "TI Adaptive Body Bias on-chip LDO" |
82b736df | 646 | depends on ARCH_OMAP |
4c5dabce | 647 | help |
82b736df MB |
648 | Select this option to support Texas Instruments' on-chip Adaptive Body |
649 | Bias (ABB) LDO regulators. It is recommended that this option be | |
650 | enabled on required TI SoC. Certain Operating Performance Points | |
651 | on TI SoCs may be unstable without enabling this as it provides | |
652 | device specific optimized bias to allow/optimize functionality. | |
4c5dabce | 653 | |
3615a34e LW |
654 | config REGULATOR_STW481X_VMMC |
655 | bool "ST Microelectronics STW481X VMMC regulator" | |
4049dc1a | 656 | depends on MFD_STW481X || COMPILE_TEST |
3615a34e LW |
657 | default y if MFD_STW481X |
658 | help | |
659 | This driver supports the internal VMMC regulator in the STw481x | |
660 | PMIC chips. | |
661 | ||
0c570674 LD |
662 | config REGULATOR_TPS51632 |
663 | tristate "TI TPS51632 Power Regulator" | |
664 | depends on I2C | |
665 | select REGMAP_I2C | |
666 | help | |
667 | This driver supports TPS51632 voltage regulator chip. | |
7bde7672 | 668 | The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller |
0c570674 LD |
669 | with Serial VID control and DVFS. |
670 | The voltage output can be configure through I2C interface or PWM | |
671 | interface. | |
672 | ||
2edd3b69 LW |
673 | config REGULATOR_TPS6105X |
674 | tristate "TI TPS6105X Power regulators" | |
675 | depends on TPS6105X | |
676 | default y if TPS6105X | |
677 | help | |
678 | This driver supports TPS61050/TPS61052 voltage regulator chips. | |
679 | It is a single boost converter primarily for white LEDs and | |
680 | audio amplifiers. | |
681 | ||
dfb9b8a4 | 682 | config REGULATOR_TPS62360 |
d1cf4f65 | 683 | tristate "TI TPS6236x Power Regulator" |
dfb9b8a4 AL |
684 | depends on I2C |
685 | select REGMAP_I2C | |
686 | help | |
d1cf4f65 | 687 | This driver supports TPS6236x voltage regulator chip. This |
dfb9b8a4 AL |
688 | regulator is meant for processor core supply. This chip is |
689 | high-frequency synchronous step down dc-dc converter optimized | |
690 | for battery-powered portable applications. | |
691 | ||
2de79850 AA |
692 | config REGULATOR_TPS65023 |
693 | tristate "TI TPS65023 Power regulators" | |
694 | depends on I2C | |
90923351 | 695 | select REGMAP_I2C |
2de79850 AA |
696 | help |
697 | This driver supports TPS65023 voltage regulator chips. TPS65023 provides | |
698 | three step-down converters and two general-purpose LDO voltage regulators. | |
699 | It supports TI's software based Class-2 SmartReflex implementation. | |
700 | ||
701 | config REGULATOR_TPS6507X | |
702 | tristate "TI TPS6507X Power regulators" | |
703 | depends on I2C | |
704 | help | |
705 | This driver supports TPS6507X voltage regulator chips. TPS6507X provides | |
706 | three step-down converters and two general-purpose LDO voltage regulators. | |
707 | It supports TI's software based Class-2 SmartReflex implementation. | |
708 | ||
d2a2e729 AD |
709 | config REGULATOR_TPS65086 |
710 | tristate "TI TPS65086 Power regulators" | |
711 | depends on MFD_TPS65086 | |
712 | help | |
713 | This driver provides support for the voltage regulators on | |
714 | TI TPS65086 PMICs. | |
715 | ||
452534e5 VB |
716 | config REGULATOR_TPS65090 |
717 | tristate "TI TPS65090 Power regulator" | |
718 | depends on MFD_TPS65090 | |
719 | help | |
720 | This driver provides support for the voltage regulators on the | |
721 | TI TPS65090 PMIC. | |
722 | ||
a493077f AC |
723 | config REGULATOR_TPS65217 |
724 | tristate "TI TPS65217 Power regulators" | |
725 | depends on MFD_TPS65217 | |
9260ad98 | 726 | help |
a493077f AC |
727 | This driver supports TPS65217 voltage regulator chips. TPS65217 |
728 | provides three step-down converters and four general-purpose LDO | |
729 | voltage regulators. It supports software based voltage control | |
730 | for different voltage domains | |
9260ad98 | 731 | |
90e7d526 K |
732 | config REGULATOR_TPS65218 |
733 | tristate "TI TPS65218 Power regulators" | |
948838a1 | 734 | depends on MFD_TPS65218 && OF |
90e7d526 K |
735 | help |
736 | This driver supports TPS65218 voltage regulator chips. TPS65218 | |
737 | provides six step-down converters and one general-purpose LDO | |
738 | voltage regulators. It supports software based voltage control | |
739 | for different voltage domains | |
740 | ||
1394fd28 CC |
741 | config REGULATOR_TPS6524X |
742 | tristate "TI TPS6524X Power regulators" | |
743 | depends on SPI | |
be0e2d3e | 744 | help |
1394fd28 CC |
745 | This driver supports TPS6524X voltage regulator chips. TPS6524X |
746 | provides three step-down converters and two general-purpose LDO | |
747 | voltage regulators. This device is interfaced using a customized | |
748 | serial interface currently supported on the sequencer serial | |
749 | port controller. | |
be0e2d3e | 750 | |
dfb9b8a4 AL |
751 | config REGULATOR_TPS6586X |
752 | tristate "TI TPS6586X Power regulators" | |
753 | depends on MFD_TPS6586X | |
51bd6943 | 754 | help |
dfb9b8a4 | 755 | This driver supports TPS6586X voltage regulator chips. |
51bd6943 | 756 | |
518fb721 | 757 | config REGULATOR_TPS65910 |
ae0e6544 | 758 | tristate "TI TPS65910/TPS65911 Power Regulators" |
518fb721 | 759 | depends on MFD_TPS65910 |
8b385d9b | 760 | help |
ae0e6544 | 761 | This driver supports TPS65910/TPS65911 voltage regulator chips. |
c789ca20 | 762 | |
dfb9b8a4 AL |
763 | config REGULATOR_TPS65912 |
764 | tristate "TI TPS65912 Power regulator" | |
765 | depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) | |
c789ca20 | 766 | help |
dfb9b8a4 | 767 | This driver supports TPS65912 voltage regulator chip. |
c789ca20 | 768 | |
1a0bb679 LD |
769 | config REGULATOR_TPS80031 |
770 | tristate "TI TPS80031/TPS80032 power regualtor driver" | |
771 | depends on MFD_TPS80031 | |
772 | help | |
773 | TPS80031/ TPS80032 Fully Integrated Power Management with Power | |
774 | Path and Battery Charger. It has 5 configurable step-down | |
775 | converters, 11 general purpose LDOs, VBUS generator and digital | |
776 | output to control regulators. | |
777 | ||
dfb9b8a4 | 778 | config REGULATOR_TWL4030 |
631a1fc4 | 779 | tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" |
dfb9b8a4 | 780 | depends on TWL4030_CORE |
1032fbfd | 781 | help |
dfb9b8a4 AL |
782 | This driver supports the voltage regulators provided by |
783 | this family of companion chips. | |
1032fbfd | 784 | |
31e54086 PM |
785 | config REGULATOR_VEXPRESS |
786 | tristate "Versatile Express regulators" | |
787 | depends on VEXPRESS_CONFIG | |
788 | help | |
789 | This driver provides support for voltage regulators available | |
790 | on the ARM Ltd's Versatile Express platform. | |
791 | ||
dfb9b8a4 AL |
792 | config REGULATOR_WM831X |
793 | tristate "Wolfson Microelectronics WM831x PMIC regulators" | |
794 | depends on MFD_WM831X | |
49610235 | 795 | help |
dfb9b8a4 AL |
796 | Support the voltage and current regulators of the WM831x series |
797 | of PMIC devices. | |
49610235 | 798 | |
dfb9b8a4 AL |
799 | config REGULATOR_WM8350 |
800 | tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" | |
801 | depends on MFD_WM8350 | |
1394fd28 | 802 | help |
dfb9b8a4 | 803 | This driver provides support for the voltage and current regulators |
c6d678b6 | 804 | of the WM8350 AudioPlus PMIC. |
1394fd28 | 805 | |
dfb9b8a4 AL |
806 | config REGULATOR_WM8400 |
807 | tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" | |
808 | depends on MFD_WM8400 | |
518fb721 | 809 | help |
dfb9b8a4 AL |
810 | This driver provides support for the voltage regulators of the |
811 | WM8400 AudioPlus PMIC. | |
518fb721 | 812 | |
dfb9b8a4 AL |
813 | config REGULATOR_WM8994 |
814 | tristate "Wolfson Microelectronics WM8994 CODEC" | |
815 | depends on MFD_WM8994 | |
f7eb6c5e | 816 | help |
dfb9b8a4 AL |
817 | This driver provides support for the voltage regulators on the |
818 | WM8994 CODEC. | |
f7eb6c5e | 819 | |
bbda14df | 820 | endif |
295c08bc | 821 |