Commit | Line | Data |
---|---|---|
bbda14df | 1 | menuconfig REGULATOR |
ba7e4763 | 2 | bool "Voltage and Current Regulator Support" |
ba7e4763 LG |
3 | help |
4 | Generic Voltage and Current Regulator support. | |
5 | ||
6 | This framework is designed to provide a generic interface to voltage | |
7 | and current regulators within the Linux kernel. It's intended to | |
8 | provide voltage and current control to client or consumer drivers and | |
9 | also provide status information to user space applications through a | |
10 | sysfs interface. | |
11 | ||
12 | The intention is to allow systems to dynamically control regulator | |
13 | output in order to save power and prolong battery life. This applies | |
14 | to both voltage regulators (where voltage output is controllable) and | |
15 | current sinks (where current output is controllable). | |
16 | ||
17 | This framework safely compiles out if not selected so that client | |
18 | drivers can still be used in systems with no software controllable | |
19 | regulators. | |
20 | ||
21 | If unsure, say no. | |
22 | ||
809d310c | 23 | |
bbda14df TI |
24 | if REGULATOR |
25 | ||
ba7e4763 LG |
26 | config REGULATOR_DEBUG |
27 | bool "Regulator debug support" | |
ba7e4763 LG |
28 | help |
29 | Say yes here to enable debugging support. | |
30 | ||
31 | config REGULATOR_FIXED_VOLTAGE | |
a9cb63b2 | 32 | tristate "Fixed voltage regulator support" |
a9cb63b2 MB |
33 | help |
34 | This driver provides support for fixed voltage regulators, | |
35 | useful for systems which use a combination of software | |
36 | managed regulators and simple non-configurable regulators. | |
ba7e4763 LG |
37 | |
38 | config REGULATOR_VIRTUAL_CONSUMER | |
39 | tristate "Virtual regulator consumer support" | |
ba7e4763 LG |
40 | help |
41 | This driver provides a virtual consumer for the voltage and | |
c6d678b6 MJ |
42 | current regulator API which provides sysfs controls for |
43 | configuring the supplies requested. This is mainly useful | |
44 | for test purposes. | |
ba7e4763 | 45 | |
c6d678b6 | 46 | If unsure, say no. |
ba7e4763 | 47 | |
1d98cccf MR |
48 | config REGULATOR_USERSPACE_CONSUMER |
49 | tristate "Userspace regulator consumer support" | |
1d98cccf MR |
50 | help |
51 | There are some classes of devices that are controlled entirely | |
6f2653e6 | 52 | from user space. Userspace consumer driver provides ability to |
1d98cccf MR |
53 | control power supplies for such devices. |
54 | ||
c6d678b6 | 55 | If unsure, say no. |
1d98cccf | 56 | |
95f1dc08 CX |
57 | config REGULATOR_88PM800 |
58 | tristate "Marvell 88PM800 Power regulators" | |
7c45f60b | 59 | depends on MFD_88PM800 |
95f1dc08 CX |
60 | help |
61 | This driver supports Marvell 88PM800 voltage regulator chips. | |
62 | It delivers digitally programmable output, | |
63 | the voltage is programmed via I2C interface. | |
64 | It's suitable to support PXA988 chips to control VCC_MAIN and | |
65 | various voltages. | |
66 | ||
82b736df | 67 | config REGULATOR_88PM8607 |
631a1fc4 | 68 | tristate "Marvell 88PM8607 Power regulators" |
82b736df | 69 | depends on MFD_88PM860X=y |
3f0292ae | 70 | help |
82b736df | 71 | This driver supports 88PM8607 voltage regulator chips. |
3f0292ae | 72 | |
33036f48 WY |
73 | config REGULATOR_ACT8865 |
74 | tristate "Active-semi act8865 voltage regulator" | |
75 | depends on I2C | |
76 | select REGMAP_I2C | |
77 | help | |
78 | This driver controls a active-semi act8865 voltage output | |
79 | regulator via I2C bus. | |
80 | ||
dfb9b8a4 AL |
81 | config REGULATOR_AD5398 |
82 | tristate "Analog Devices AD5398/AD5821 regulators" | |
83 | depends on I2C | |
0eb5d5ab | 84 | help |
dfb9b8a4 AL |
85 | This driver supports AD5398 and AD5821 current regulator chips. |
86 | If building into module, its name is ad5398.ko. | |
87 | ||
82b736df MB |
88 | config REGULATOR_ANATOP |
89 | tristate "Freescale i.MX on-chip ANATOP LDO regulators" | |
90 | depends on MFD_SYSCON | |
91 | help | |
92 | Say y here to support Freescale i.MX on-chip ANATOP LDOs | |
93 | regulators. It is recommended that this option be | |
94 | enabled on i.MX6 platform. | |
95 | ||
dfb9b8a4 AL |
96 | config REGULATOR_AAT2870 |
97 | tristate "AnalogicTech AAT2870 Regulators" | |
98 | depends on MFD_AAT2870_CORE | |
99 | help | |
100 | If you have a AnalogicTech AAT2870 say Y to enable the | |
101 | regulator driver. | |
102 | ||
82b736df MB |
103 | config REGULATOR_AB3100 |
104 | tristate "ST-Ericsson AB3100 Regulator functions" | |
105 | depends on AB3100_CORE | |
106 | default y if AB3100_CORE | |
107 | help | |
108 | These regulators correspond to functionality in the | |
109 | AB3100 analog baseband dealing with power regulators | |
110 | for the system. | |
111 | ||
112 | config REGULATOR_AB8500 | |
113 | bool "ST-Ericsson AB8500 Power Regulators" | |
114 | depends on AB8500_CORE | |
115 | help | |
116 | This driver supports the regulators found on the ST-Ericsson mixed | |
117 | signal AB8500 PMIC | |
118 | ||
b667a45d MB |
119 | config REGULATOR_ARIZONA |
120 | tristate "Wolfson Arizona class devices" | |
121 | depends on MFD_ARIZONA | |
e6ed9058 | 122 | depends on SND_SOC |
b667a45d MB |
123 | help |
124 | Support for the regulators found on Wolfson Arizona class | |
125 | devices. | |
126 | ||
82b736df MB |
127 | config REGULATOR_AS3711 |
128 | tristate "AS3711 PMIC" | |
129 | depends on MFD_AS3711 | |
130 | help | |
131 | This driver provides support for the voltage regulators on the | |
132 | AS3711 PMIC | |
133 | ||
bc407334 LD |
134 | config REGULATOR_AS3722 |
135 | tristate "AMS AS3722 PMIC Regulators" | |
136 | depends on MFD_AS3722 | |
137 | help | |
138 | This driver provides support for the voltage regulators on the | |
139 | AS3722 PMIC. This will enable support for all the software | |
140 | controllable DCDC/LDO regulators. | |
141 | ||
dfe7a1b0 CC |
142 | config REGULATOR_AXP20X |
143 | tristate "X-POWERS AXP20X PMIC Regulators" | |
144 | depends on MFD_AXP20X | |
145 | help | |
146 | This driver provides support for the voltage regulators on the | |
147 | AXP20X PMIC. | |
148 | ||
462c9fc5 MP |
149 | config REGULATOR_BCM590XX |
150 | tristate "Broadcom BCM590xx PMU Regulators" | |
151 | depends on MFD_BCM590XX | |
152 | help | |
153 | This driver provides support for the voltage regulators on the | |
154 | BCM590xx PMUs. This will enable support for the software | |
155 | controllable LDO/Switching regulators. | |
156 | ||
dfb9b8a4 AL |
157 | config REGULATOR_DA903X |
158 | tristate "Dialog Semiconductor DA9030/DA9034 regulators" | |
159 | depends on PMIC_DA903X | |
160 | help | |
161 | Say y here to support the BUCKs and LDOs regulators found on | |
162 | Dialog Semiconductor DA9030/DA9034 PMIC. | |
163 | ||
164 | config REGULATOR_DA9052 | |
165 | tristate "Dialog Semiconductor DA9052/DA9053 regulators" | |
166 | depends on PMIC_DA9052 | |
167 | help | |
168 | This driver supports the voltage regulators of DA9052-BC and | |
169 | DA9053-AA/Bx PMIC. | |
170 | ||
f6130be6 AJ |
171 | config REGULATOR_DA9055 |
172 | tristate "Dialog Semiconductor DA9055 regulators" | |
173 | depends on MFD_DA9055 | |
174 | help | |
175 | Say y here to support the BUCKs and LDOs regulators found on | |
176 | Dialog Semiconductor DA9055 PMIC. | |
177 | ||
178 | This driver can also be built as a module. If so, the module | |
179 | will be called da9055-regulator. | |
180 | ||
4068e518 T |
181 | config REGULATOR_DA9062 |
182 | tristate "Dialog Semiconductor DA9062 regulators" | |
183 | depends on MFD_DA9062 | |
184 | help | |
185 | Say y here to support the BUCKs and LDOs regulators found on | |
186 | DA9062 PMICs. | |
187 | ||
188 | This driver can also be built as a module. If so, the module | |
189 | will be called da9062-regulator. | |
190 | ||
69ca3e58 KG |
191 | config REGULATOR_DA9063 |
192 | tristate "Dialog Semiconductor DA9063 regulators" | |
193 | depends on MFD_DA9063 | |
194 | help | |
195 | Say y here to support the BUCKs and LDOs regulators found on | |
196 | DA9063 PMICs. | |
197 | ||
198 | This driver can also be built as a module. If so, the module | |
199 | will be called da9063-regulator. | |
200 | ||
16f10918 ST |
201 | config REGULATOR_DA9210 |
202 | tristate "Dialog Semiconductor DA9210 regulator" | |
203 | depends on I2C | |
204 | select REGMAP_I2C | |
205 | help | |
206 | Say y here to support for the Dialog Semiconductor DA9210. | |
207 | The DA9210 is a multi-phase synchronous step down | |
208 | converter 12A DC-DC Buck controlled through an I2C | |
1028a37d JB |
209 | interface. |
210 | ||
211 | config REGULATOR_DA9211 | |
7bd39354 | 212 | tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator" |
1028a37d JB |
213 | depends on I2C |
214 | select REGMAP_I2C | |
215 | help | |
005547e0 | 216 | Say y here to support for the Dialog Semiconductor DA9211/DA9212 |
7bd39354 JB |
217 | /DA9213/DA9214/DA9215. |
218 | The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous | |
005547e0 | 219 | step down converter 12A or 16A DC-DC Buck controlled through an I2C |
16f10918 ST |
220 | interface. |
221 | ||
82b736df MB |
222 | config REGULATOR_DBX500_PRCMU |
223 | bool | |
224 | ||
225 | config REGULATOR_DB8500_PRCMU | |
226 | bool "ST-Ericsson DB8500 Voltage Domain Regulators" | |
227 | depends on MFD_DB8500_PRCMU | |
228 | select REGULATOR_DBX500_PRCMU | |
229 | help | |
230 | This driver supports the voltage domain regulators controlled by the | |
231 | DB8500 PRCMU | |
232 | ||
49d8c599 YZ |
233 | config REGULATOR_FAN53555 |
234 | tristate "Fairchild FAN53555 Regulator" | |
235 | depends on I2C | |
236 | select REGMAP_I2C | |
237 | help | |
238 | This driver supports Fairchild FAN53555 Digitally Programmable | |
239 | TinyBuck Regulator. The FAN53555 is a step-down switching voltage | |
240 | regulator that delivers a digitally programmable output from an | |
241 | input voltage supply of 2.5V to 5.5V. The output voltage is | |
242 | programmed through an I2C interface. | |
243 | ||
82b736df MB |
244 | config REGULATOR_GPIO |
245 | tristate "GPIO regulator support" | |
9eac5fdf | 246 | depends on GPIOLIB || COMPILE_TEST |
e3e5aff7 | 247 | help |
82b736df MB |
248 | This driver provides support for regulators that can be |
249 | controlled via gpios. | |
250 | It is capable of supporting current and voltage regulators | |
251 | and the platform has to provide a mapping of GPIO-states | |
252 | to target volts/amps. | |
e3e5aff7 | 253 | |
87ca186f GX |
254 | config REGULATOR_HI6421 |
255 | tristate "HiSilicon Hi6421 PMIC voltage regulator support" | |
256 | depends on MFD_HI6421_PMIC && OF | |
257 | help | |
258 | This driver provides support for the voltage regulators on the | |
259 | HiSilicon Hi6421 PMU / Codec IC. | |
260 | Hi6421 is a multi-function device which, on regulator part, provides | |
261 | 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All | |
262 | of them come with support to either ECO (idle) or sleep mode. | |
263 | ||
dec38b5c MB |
264 | config REGULATOR_ISL9305 |
265 | tristate "Intersil ISL9305 regulator" | |
266 | depends on I2C | |
ba441ec2 | 267 | select REGMAP_I2C |
dec38b5c MB |
268 | help |
269 | This driver supports ISL9305 voltage regulator chip. | |
270 | ||
82b736df MB |
271 | config REGULATOR_ISL6271A |
272 | tristate "Intersil ISL6271A Power regulator" | |
273 | depends on I2C | |
274 | help | |
275 | This driver supports ISL6271A voltage regulator chip. | |
dfb9b8a4 | 276 | |
82b736df MB |
277 | config REGULATOR_LP3971 |
278 | tristate "National Semiconductors LP3971 PMIC regulator driver" | |
279 | depends on I2C | |
dfb9b8a4 | 280 | help |
82b736df MB |
281 | Say Y here to support the voltage regulators and convertors |
282 | on National Semiconductors LP3971 PMIC | |
dfb9b8a4 | 283 | |
82b736df MB |
284 | config REGULATOR_LP3972 |
285 | tristate "National Semiconductors LP3972 PMIC regulator driver" | |
286 | depends on I2C | |
dfb9b8a4 | 287 | help |
82b736df MB |
288 | Say Y here to support the voltage regulators and convertors |
289 | on National Semiconductors LP3972 PMIC | |
dfb9b8a4 | 290 | |
82b736df | 291 | config REGULATOR_LP872X |
631a1fc4 | 292 | tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" |
613965fb | 293 | depends on I2C |
82b736df MB |
294 | select REGMAP_I2C |
295 | help | |
296 | This driver supports LP8720/LP8725 PMIC | |
297 | ||
298 | config REGULATOR_LP8755 | |
299 | tristate "TI LP8755 High Performance PMU driver" | |
dfb9b8a4 | 300 | depends on I2C |
82b736df | 301 | select REGMAP_I2C |
dfb9b8a4 | 302 | help |
82b736df MB |
303 | This driver supports LP8755 High Performance PMU driver. This |
304 | chip contains six step-down DC/DC converters which can support | |
305 | 9 mode multiphase configuration. | |
dfb9b8a4 | 306 | |
82b736df | 307 | config REGULATOR_LP8788 |
631a1fc4 | 308 | tristate "TI LP8788 Power Regulators" |
82b736df | 309 | depends on MFD_LP8788 |
dfb9b8a4 | 310 | help |
82b736df | 311 | This driver supports LP8788 voltage regulator chip. |
0eb5d5ab | 312 | |
3eb2c7ec | 313 | config REGULATOR_LTC3589 |
ac1d6868 AL |
314 | tristate "LTC3589 8-output voltage regulator" |
315 | depends on I2C | |
316 | select REGMAP_I2C | |
3eb2c7ec PZ |
317 | help |
318 | This enables support for the LTC3589, LTC3589-1, and LTC3589-2 | |
319 | 8-output regulators controlled via I2C. | |
320 | ||
b0902bbe | 321 | config REGULATOR_MAX14577 |
8a82b408 | 322 | tristate "Maxim 14577/77836 regulator" |
b0902bbe KK |
323 | depends on MFD_MAX14577 |
324 | help | |
8a82b408 KK |
325 | This driver controls a Maxim MAX14577/77836 regulator via I2C bus. |
326 | The MAX14577 regulators include safeout LDO and charger current | |
327 | regulator. The MAX77836 has two additional LDOs. | |
b0902bbe | 328 | |
55f4fa4e RJ |
329 | config REGULATOR_MAX1586 |
330 | tristate "Maxim 1586/1587 voltage regulator" | |
331 | depends on I2C | |
55f4fa4e RJ |
332 | help |
333 | This driver controls a Maxim 1586 or 1587 voltage output | |
334 | regulator via I2C bus. The provided regulator is suitable | |
335 | for PXA27x chips to control VCC_CORE and VCC_USIM voltages. | |
336 | ||
a71b797f HZ |
337 | config REGULATOR_MAX8649 |
338 | tristate "Maxim 8649 voltage regulator" | |
339 | depends on I2C | |
c5b68d47 | 340 | select REGMAP_I2C |
a71b797f HZ |
341 | help |
342 | This driver controls a Maxim 8649 voltage output regulator via | |
343 | I2C bus. | |
344 | ||
27f37e4b WS |
345 | config REGULATOR_MAX8660 |
346 | tristate "Maxim 8660/8661 voltage regulator" | |
347 | depends on I2C | |
348 | help | |
349 | This driver controls a Maxim 8660/8661 voltage output | |
350 | regulator via I2C bus. | |
351 | ||
ffee1909 GY |
352 | config REGULATOR_MAX8907 |
353 | tristate "Maxim 8907 voltage regulator" | |
354 | depends on MFD_MAX8907 | |
355 | help | |
356 | This driver controls a Maxim 8907 voltage output regulator | |
357 | via I2C bus. The provided regulator is suitable for Tegra | |
358 | chip to control Step-Down DC-DC and LDOs. | |
359 | ||
08ff6f2a HZ |
360 | config REGULATOR_MAX8925 |
361 | tristate "Maxim MAX8925 Power Management IC" | |
362 | depends on MFD_MAX8925 | |
363 | help | |
364 | Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. | |
365 | ||
202f4f53 MH |
366 | config REGULATOR_MAX8952 |
367 | tristate "Maxim MAX8952 Power Management IC" | |
368 | depends on I2C | |
369 | help | |
370 | This driver controls a Maxim 8952 voltage output regulator | |
371 | via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS | |
372 | modes ranging from 0.77V to 1.40V by 0.01V steps. | |
373 | ||
5928f538 LD |
374 | config REGULATOR_MAX8973 |
375 | tristate "Maxim MAX8973 voltage regulator " | |
376 | depends on I2C | |
377 | select REGMAP_I2C | |
378 | help | |
379 | The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down | |
380 | switching regulator delievers up to 9A of output current. Each | |
381 | phase operates at a 2MHz fixed frequency with a 120 deg shift | |
382 | from the adjacent phase, allowing the use of small magnetic component. | |
383 | ||
bd6ca2cf MH |
384 | config REGULATOR_MAX8997 |
385 | tristate "Maxim 8997/8966 regulator" | |
386 | depends on MFD_MAX8997 | |
387 | help | |
388 | This driver controls a Maxim 8997/8966 regulator | |
389 | via I2C bus. The provided regulator is suitable for S5PC110, | |
390 | S5PV210, and Exynos-4 chips to control VCC_CORE and | |
391 | VCC_USIM voltages. | |
392 | ||
156f2528 KP |
393 | config REGULATOR_MAX8998 |
394 | tristate "Maxim 8998 voltage regulator" | |
69f71008 | 395 | depends on MFD_MAX8998 |
156f2528 KP |
396 | help |
397 | This driver controls a Maxim 8998 voltage output regulator | |
398 | via I2C bus. The provided regulator is suitable for S3C6410 | |
399 | and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. | |
400 | ||
133d4016 JL |
401 | config REGULATOR_MAX77686 |
402 | tristate "Maxim 77686 regulator" | |
403 | depends on MFD_MAX77686 | |
404 | help | |
405 | This driver controls a Maxim 77686 regulator | |
406 | via I2C bus. The provided regulator is suitable for | |
407 | Exynos-4 chips to control VARM and VINT voltages. | |
408 | ||
80b022e2 | 409 | config REGULATOR_MAX77693 |
9e9a08e8 KK |
410 | tristate "Maxim 77693/77843 regulator" |
411 | depends on (MFD_MAX77693 || MFD_MAX77843) | |
80b022e2 | 412 | help |
9e9a08e8 | 413 | This driver controls a Maxim 77693/77843 regulators via I2C bus. |
80b022e2 JL |
414 | The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' |
415 | and one current regulator 'CHARGER'. This is suitable for | |
9e9a08e8 | 416 | Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips. |
80b022e2 | 417 | |
e6f2f805 JMC |
418 | config REGULATOR_MAX77802 |
419 | tristate "Maxim 77802 regulator" | |
420 | depends on MFD_MAX77686 | |
421 | help | |
422 | This driver controls a Maxim 77802 regulator | |
423 | via I2C bus. The provided regulator is suitable for | |
424 | Exynos5420/Exynos5800 SoCs to control various voltages. | |
425 | It includes support for control of voltage and ramp speed. | |
426 | ||
82b736df MB |
427 | config REGULATOR_MC13XXX_CORE |
428 | tristate | |
5ec271e7 | 429 | |
82b736df MB |
430 | config REGULATOR_MC13783 |
431 | tristate "Freescale MC13783 regulator driver" | |
e5a3da21 | 432 | depends on MFD_MC13XXX |
82b736df | 433 | select REGULATOR_MC13XXX_CORE |
0cbdf7bc | 434 | help |
82b736df MB |
435 | Say y here to support the regulators found on the Freescale MC13783 |
436 | PMIC. | |
0cbdf7bc | 437 | |
82b736df MB |
438 | config REGULATOR_MC13892 |
439 | tristate "Freescale MC13892 regulator driver" | |
440 | depends on MFD_MC13XXX | |
441 | select REGULATOR_MC13XXX_CORE | |
5976f095 | 442 | help |
82b736df MB |
443 | Say y here to support the regulators found on the Freescale MC13892 |
444 | PMIC. | |
5976f095 | 445 | |
8766018b HC |
446 | config REGULATOR_MT6311 |
447 | tristate "MediaTek MT6311 PMIC" | |
448 | depends on I2C | |
449 | help | |
450 | Say y here to select this option to enable the power regulator of | |
451 | MediaTek MT6311 PMIC. | |
452 | This driver supports the control of different power rails of device | |
453 | through regulator interface. | |
454 | ||
0425e242 FF |
455 | config REGULATOR_MT6397 |
456 | tristate "MediaTek MT6397 PMIC" | |
457 | depends on MFD_MT6397 | |
458 | help | |
459 | Say y here to select this option to enable the power regulator of | |
460 | MediaTek MT6397 PMIC. | |
461 | This driver supports the control of different power rails of device | |
462 | through regulator interface. | |
463 | ||
82b736df MB |
464 | config REGULATOR_PALMAS |
465 | tristate "TI Palmas PMIC Regulators" | |
466 | depends on MFD_PALMAS | |
af8b5fc3 | 467 | help |
82b736df MB |
468 | If you wish to control the regulators on the Palmas series of |
469 | chips say Y here. This will enable support for all the software | |
470 | controllable SMPS/LDO regulators. | |
af8b5fc3 | 471 | |
82b736df MB |
472 | The regulators available on Palmas series chips vary depending |
473 | on the muxing. This is handled automatically in the driver by | |
474 | reading the mux info from OTP. | |
b59320cc | 475 | |
11469e0b B |
476 | config REGULATOR_PBIAS |
477 | tristate "PBIAS OMAP regulator driver" | |
478 | depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON | |
479 | help | |
480 | Say y here to support pbias regulator for mmc1:SD card i/o | |
481 | on OMAP SoCs. | |
482 | This driver provides support for OMAP pbias modelled | |
483 | regulators. | |
484 | ||
82b736df MB |
485 | config REGULATOR_PCAP |
486 | tristate "Motorola PCAP2 regulator driver" | |
487 | depends on EZX_PCAP | |
ade7515f | 488 | help |
82b736df MB |
489 | This driver provides support for the voltage regulators of the |
490 | PCAP2 PMIC. | |
ade7515f | 491 | |
dfb9b8a4 AL |
492 | config REGULATOR_PCF50633 |
493 | tristate "NXP PCF50633 regulator driver" | |
c6d678b6 | 494 | depends on MFD_PCF50633 |
295c08bc | 495 | help |
dfb9b8a4 AL |
496 | Say Y here to support the voltage regulators and convertors |
497 | on PCF50633 | |
295c08bc | 498 | |
3784b6d6 | 499 | config REGULATOR_PFUZE100 |
2cee2121 | 500 | tristate "Freescale PFUZE100/PFUZE200 regulator driver" |
3784b6d6 | 501 | depends on I2C |
94421b05 | 502 | select REGMAP_I2C |
3784b6d6 | 503 | help |
2cee2121 AL |
504 | Say y here to support the regulators found on the Freescale |
505 | PFUZE100/PFUZE200 PMIC. | |
3784b6d6 | 506 | |
aa66cc66 CZ |
507 | config REGULATOR_PWM |
508 | tristate "PWM voltage regulator" | |
509 | depends on PWM | |
510 | help | |
511 | This driver supports PWM controlled voltage regulators. PWM | |
512 | duty cycle can increase or decrease the voltage. | |
513 | ||
2720386e BA |
514 | config REGULATOR_QCOM_RPM |
515 | tristate "Qualcomm RPM regulator driver" | |
516 | depends on MFD_QCOM_RPM | |
517 | help | |
518 | If you say yes to this option, support will be included for the | |
519 | regulators exposed by the Resource Power Manager found in Qualcomm | |
520 | 8660, 8960 and 8064 based devices. | |
521 | ||
522 | Say M here if you want to include support for the regulators on the | |
523 | Qualcomm RPM as a module. The module will be named | |
524 | "qcom_rpm-regulator". | |
525 | ||
da65e367 BA |
526 | config REGULATOR_QCOM_SMD_RPM |
527 | tristate "Qualcomm SMD based RPM regulator driver" | |
528 | depends on QCOM_SMD_RPM | |
529 | help | |
530 | If you say yes to this option, support will be included for the | |
531 | regulators exposed by the Resource Power Manager found in Qualcomm | |
532 | 8974 based devices. | |
533 | ||
534 | Say M here if you want to include support for the regulators on the | |
535 | Qualcomm RPM as a module. The module will be named | |
536 | "qcom_smd-regulator". | |
537 | ||
e92a4047 SB |
538 | config REGULATOR_QCOM_SPMI |
539 | tristate "Qualcomm SPMI regulator driver" | |
540 | depends on SPMI || COMPILE_TEST | |
541 | help | |
542 | If you say yes to this option, support will be included for the | |
543 | regulators found in Qualcomm SPMI PMICs. | |
544 | ||
545 | Say M here if you want to include support for the regulators on the | |
546 | Qualcomm SPMI PMICs as a module. The module will be named | |
547 | "qcom_spmi-regulator". | |
548 | ||
6ffc3270 LD |
549 | config REGULATOR_RC5T583 |
550 | tristate "RICOH RC5T583 Power regulators" | |
551 | depends on MFD_RC5T583 | |
552 | help | |
553 | Select this option to enable the power regulator of RICOH | |
554 | PMIC RC5T583. | |
555 | This driver supports the control of different power rails of device | |
556 | through regulator interface. The device supports multiple DCDC/LDO | |
557 | outputs which can be controlled by i2c communication. | |
558 | ||
2cd64ae3 CZ |
559 | config REGULATOR_RK808 |
560 | tristate "Rockchip RK808 Power regulators" | |
561 | depends on MFD_RK808 | |
562 | help | |
563 | Select this option to enable the power regulator of ROCKCHIP | |
564 | PMIC RK808. | |
565 | This driver supports the control of different power rails of device | |
566 | through regulator interface. The device supports multiple DCDC/LDO | |
567 | outputs which can be controlled by i2c communication. | |
568 | ||
811b7006 BG |
569 | config REGULATOR_RN5T618 |
570 | tristate "Ricoh RN5T618 voltage regulators" | |
571 | depends on MFD_RN5T618 | |
572 | help | |
573 | Say y here to support the regulators found on Ricoh RN5T618 PMIC. | |
574 | ||
b1917578 BS |
575 | config REGULATOR_RT5033 |
576 | tristate "Richtek RT5033 Regulators" | |
577 | depends on MFD_RT5033 | |
578 | help | |
579 | This adds support for voltage and current regulators in Richtek | |
580 | RT5033 PMIC. The device supports multiple regulators like | |
581 | current source, LDO and Buck. | |
582 | ||
f1879271 SK |
583 | config REGULATOR_S2MPA01 |
584 | tristate "Samsung S2MPA01 voltage regulator" | |
585 | depends on MFD_SEC_CORE | |
586 | help | |
587 | This driver controls Samsung S2MPA01 voltage output regulator | |
588 | via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. | |
589 | ||
cb74685e | 590 | config REGULATOR_S2MPS11 |
76b9840b | 591 | tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator" |
cb74685e SK |
592 | depends on MFD_SEC_CORE |
593 | help | |
76b9840b CC |
594 | This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage |
595 | output regulator via I2C bus. The chip is comprised of high efficient | |
596 | Buck converters including Dual-Phase Buck converter, Buck-Boost | |
597 | converter, various LDOs. | |
cb74685e | 598 | |
dfb9b8a4 AL |
599 | config REGULATOR_S5M8767 |
600 | tristate "Samsung S5M8767A voltage regulator" | |
66c9fbb9 | 601 | depends on MFD_SEC_CORE |
5e428d5c | 602 | help |
dfb9b8a4 AL |
603 | This driver supports a Samsung S5M8767A voltage output regulator |
604 | via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and | |
605 | supports DVS mode with 8bits of output voltage control. | |
5e428d5c | 606 | |
9839d627 GY |
607 | config REGULATOR_SKY81452 |
608 | tristate "Skyworks Solutions SKY81452 voltage regulator" | |
70b5b27c | 609 | depends on MFD_SKY81452 |
4a5d3013 | 610 | help |
9839d627 GY |
611 | This driver supports Skyworks SKY81452 voltage output regulator |
612 | via I2C bus. SKY81452 has one voltage linear regulator can be | |
613 | programmed from 4.5V to 20V. | |
614 | ||
615 | This driver can also be built as a module. If so, the module | |
616 | will be called sky81452-regulator. | |
4a5d3013 | 617 | |
82b736df | 618 | config REGULATOR_TI_ABB |
631a1fc4 | 619 | tristate "TI Adaptive Body Bias on-chip LDO" |
82b736df | 620 | depends on ARCH_OMAP |
4c5dabce | 621 | help |
82b736df MB |
622 | Select this option to support Texas Instruments' on-chip Adaptive Body |
623 | Bias (ABB) LDO regulators. It is recommended that this option be | |
624 | enabled on required TI SoC. Certain Operating Performance Points | |
625 | on TI SoCs may be unstable without enabling this as it provides | |
626 | device specific optimized bias to allow/optimize functionality. | |
4c5dabce | 627 | |
3615a34e LW |
628 | config REGULATOR_STW481X_VMMC |
629 | bool "ST Microelectronics STW481X VMMC regulator" | |
4049dc1a | 630 | depends on MFD_STW481X || COMPILE_TEST |
3615a34e LW |
631 | default y if MFD_STW481X |
632 | help | |
633 | This driver supports the internal VMMC regulator in the STw481x | |
634 | PMIC chips. | |
635 | ||
0c570674 LD |
636 | config REGULATOR_TPS51632 |
637 | tristate "TI TPS51632 Power Regulator" | |
638 | depends on I2C | |
639 | select REGMAP_I2C | |
640 | help | |
641 | This driver supports TPS51632 voltage regulator chip. | |
7bde7672 | 642 | The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller |
0c570674 LD |
643 | with Serial VID control and DVFS. |
644 | The voltage output can be configure through I2C interface or PWM | |
645 | interface. | |
646 | ||
2edd3b69 LW |
647 | config REGULATOR_TPS6105X |
648 | tristate "TI TPS6105X Power regulators" | |
649 | depends on TPS6105X | |
650 | default y if TPS6105X | |
651 | help | |
652 | This driver supports TPS61050/TPS61052 voltage regulator chips. | |
653 | It is a single boost converter primarily for white LEDs and | |
654 | audio amplifiers. | |
655 | ||
dfb9b8a4 | 656 | config REGULATOR_TPS62360 |
d1cf4f65 | 657 | tristate "TI TPS6236x Power Regulator" |
dfb9b8a4 AL |
658 | depends on I2C |
659 | select REGMAP_I2C | |
660 | help | |
d1cf4f65 | 661 | This driver supports TPS6236x voltage regulator chip. This |
dfb9b8a4 AL |
662 | regulator is meant for processor core supply. This chip is |
663 | high-frequency synchronous step down dc-dc converter optimized | |
664 | for battery-powered portable applications. | |
665 | ||
2de79850 AA |
666 | config REGULATOR_TPS65023 |
667 | tristate "TI TPS65023 Power regulators" | |
668 | depends on I2C | |
90923351 | 669 | select REGMAP_I2C |
2de79850 AA |
670 | help |
671 | This driver supports TPS65023 voltage regulator chips. TPS65023 provides | |
672 | three step-down converters and two general-purpose LDO voltage regulators. | |
673 | It supports TI's software based Class-2 SmartReflex implementation. | |
674 | ||
675 | config REGULATOR_TPS6507X | |
676 | tristate "TI TPS6507X Power regulators" | |
677 | depends on I2C | |
678 | help | |
679 | This driver supports TPS6507X voltage regulator chips. TPS6507X provides | |
680 | three step-down converters and two general-purpose LDO voltage regulators. | |
681 | It supports TI's software based Class-2 SmartReflex implementation. | |
682 | ||
452534e5 VB |
683 | config REGULATOR_TPS65090 |
684 | tristate "TI TPS65090 Power regulator" | |
685 | depends on MFD_TPS65090 | |
686 | help | |
687 | This driver provides support for the voltage regulators on the | |
688 | TI TPS65090 PMIC. | |
689 | ||
a493077f AC |
690 | config REGULATOR_TPS65217 |
691 | tristate "TI TPS65217 Power regulators" | |
692 | depends on MFD_TPS65217 | |
9260ad98 | 693 | help |
a493077f AC |
694 | This driver supports TPS65217 voltage regulator chips. TPS65217 |
695 | provides three step-down converters and four general-purpose LDO | |
696 | voltage regulators. It supports software based voltage control | |
697 | for different voltage domains | |
9260ad98 | 698 | |
90e7d526 K |
699 | config REGULATOR_TPS65218 |
700 | tristate "TI TPS65218 Power regulators" | |
948838a1 | 701 | depends on MFD_TPS65218 && OF |
90e7d526 K |
702 | help |
703 | This driver supports TPS65218 voltage regulator chips. TPS65218 | |
704 | provides six step-down converters and one general-purpose LDO | |
705 | voltage regulators. It supports software based voltage control | |
706 | for different voltage domains | |
707 | ||
1394fd28 CC |
708 | config REGULATOR_TPS6524X |
709 | tristate "TI TPS6524X Power regulators" | |
710 | depends on SPI | |
be0e2d3e | 711 | help |
1394fd28 CC |
712 | This driver supports TPS6524X voltage regulator chips. TPS6524X |
713 | provides three step-down converters and two general-purpose LDO | |
714 | voltage regulators. This device is interfaced using a customized | |
715 | serial interface currently supported on the sequencer serial | |
716 | port controller. | |
be0e2d3e | 717 | |
dfb9b8a4 AL |
718 | config REGULATOR_TPS6586X |
719 | tristate "TI TPS6586X Power regulators" | |
720 | depends on MFD_TPS6586X | |
51bd6943 | 721 | help |
dfb9b8a4 | 722 | This driver supports TPS6586X voltage regulator chips. |
51bd6943 | 723 | |
518fb721 | 724 | config REGULATOR_TPS65910 |
ae0e6544 | 725 | tristate "TI TPS65910/TPS65911 Power Regulators" |
518fb721 | 726 | depends on MFD_TPS65910 |
8b385d9b | 727 | help |
ae0e6544 | 728 | This driver supports TPS65910/TPS65911 voltage regulator chips. |
c789ca20 | 729 | |
dfb9b8a4 AL |
730 | config REGULATOR_TPS65912 |
731 | tristate "TI TPS65912 Power regulator" | |
732 | depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) | |
c789ca20 | 733 | help |
dfb9b8a4 | 734 | This driver supports TPS65912 voltage regulator chip. |
c789ca20 | 735 | |
1a0bb679 LD |
736 | config REGULATOR_TPS80031 |
737 | tristate "TI TPS80031/TPS80032 power regualtor driver" | |
738 | depends on MFD_TPS80031 | |
739 | help | |
740 | TPS80031/ TPS80032 Fully Integrated Power Management with Power | |
741 | Path and Battery Charger. It has 5 configurable step-down | |
742 | converters, 11 general purpose LDOs, VBUS generator and digital | |
743 | output to control regulators. | |
744 | ||
dfb9b8a4 | 745 | config REGULATOR_TWL4030 |
631a1fc4 | 746 | tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" |
dfb9b8a4 | 747 | depends on TWL4030_CORE |
1032fbfd | 748 | help |
dfb9b8a4 AL |
749 | This driver supports the voltage regulators provided by |
750 | this family of companion chips. | |
1032fbfd | 751 | |
31e54086 PM |
752 | config REGULATOR_VEXPRESS |
753 | tristate "Versatile Express regulators" | |
754 | depends on VEXPRESS_CONFIG | |
755 | help | |
756 | This driver provides support for voltage regulators available | |
757 | on the ARM Ltd's Versatile Express platform. | |
758 | ||
dfb9b8a4 AL |
759 | config REGULATOR_WM831X |
760 | tristate "Wolfson Microelectronics WM831x PMIC regulators" | |
761 | depends on MFD_WM831X | |
49610235 | 762 | help |
dfb9b8a4 AL |
763 | Support the voltage and current regulators of the WM831x series |
764 | of PMIC devices. | |
49610235 | 765 | |
dfb9b8a4 AL |
766 | config REGULATOR_WM8350 |
767 | tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" | |
768 | depends on MFD_WM8350 | |
1394fd28 | 769 | help |
dfb9b8a4 | 770 | This driver provides support for the voltage and current regulators |
c6d678b6 | 771 | of the WM8350 AudioPlus PMIC. |
1394fd28 | 772 | |
dfb9b8a4 AL |
773 | config REGULATOR_WM8400 |
774 | tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" | |
775 | depends on MFD_WM8400 | |
518fb721 | 776 | help |
dfb9b8a4 AL |
777 | This driver provides support for the voltage regulators of the |
778 | WM8400 AudioPlus PMIC. | |
518fb721 | 779 | |
dfb9b8a4 AL |
780 | config REGULATOR_WM8994 |
781 | tristate "Wolfson Microelectronics WM8994 CODEC" | |
782 | depends on MFD_WM8994 | |
f7eb6c5e | 783 | help |
dfb9b8a4 AL |
784 | This driver provides support for the voltage regulators on the |
785 | WM8994 CODEC. | |
f7eb6c5e | 786 | |
bbda14df | 787 | endif |
295c08bc | 788 |