[deliverable/linux.git] / drivers / regulator / Kconfig

menuconfig REGULATOR
	bool "Voltage and Current Regulator Support"
	help
	  Generic Voltage and Current Regulator support.

	  This framework is designed to provide a generic interface to voltage
	  and current regulators within the Linux kernel. It's intended to
	  provide voltage and current control to client or consumer drivers and
	  also provide status information to user space applications through a
	  sysfs interface.

	  The intention is to allow systems to dynamically control regulator
	  output in order to save power and prolong battery life. This applies
	  to both voltage regulators (where voltage output is controllable) and
	  current sinks (where current output is controllable).

	  This framework safely compiles out if not selected so that client
	  drivers can still be used in systems with no software controllable
	  regulators.

	  If unsure, say no.

if REGULATOR

config REGULATOR_DEBUG
	bool "Regulator debug support"
	help
	  Say yes here to enable debugging support.

config REGULATOR_DUMMY
	bool "Provide a dummy regulator if regulator lookups fail"
	help
	  If this option is enabled then when a regulator lookup fails
	  and the board has not specified that it has provided full
	  constraints then the regulator core will provide an always
	  enabled dummy regulator will be provided, allowing consumer
	  drivers to continue.

	  A warning will be generated when this substitution is done.

config REGULATOR_FIXED_VOLTAGE
	tristate "Fixed voltage regulator support"
	help
	  This driver provides support for fixed voltage regulators,
	  useful for systems which use a combination of software
	  managed regulators and simple non-configurable regulators.

config REGULATOR_VIRTUAL_CONSUMER
	tristate "Virtual regulator consumer support"
	help
	  This driver provides a virtual consumer for the voltage and
          current regulator API which provides sysfs controls for
          configuring the supplies requested.  This is mainly useful
          for test purposes.

          If unsure, say no.

config REGULATOR_USERSPACE_CONSUMER
	tristate "Userspace regulator consumer support"
	help
	  There are some classes of devices that are controlled entirely
	  from user space. Userspace consumer driver provides ability to
	  control power supplies for such devices.

          If unsure, say no.

config REGULATOR_GPIO
	tristate "GPIO regulator support"
	depends on GENERIC_GPIO
	help
	  This driver provides support for regulators that can be
	  controlled via gpios.
	  It is capable of supporting current and voltage regulators
	  and the platform has to provide a mapping of GPIO-states
	  to target volts/amps.

config REGULATOR_BQ24022
	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
	help
	  This driver controls a TI bq24022 Charger attached via
	  GPIOs. The provided current regulator can enable/disable
	  charging select between 100 mA and 500 mA charging current
	  limit.

config REGULATOR_MAX1586
	tristate "Maxim 1586/1587 voltage regulator"
	depends on I2C
	help
	  This driver controls a Maxim 1586 or 1587 voltage output
	  regulator via I2C bus. The provided regulator is suitable
	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.

config REGULATOR_MAX8649
	tristate "Maxim 8649 voltage regulator"
	depends on I2C
	help
	  This driver controls a Maxim 8649 voltage output regulator via
	  I2C bus.

config REGULATOR_MAX8660
	tristate "Maxim 8660/8661 voltage regulator"
	depends on I2C
	help
	  This driver controls a Maxim 8660/8661 voltage output
	  regulator via I2C bus.

config REGULATOR_MAX8925
	tristate "Maxim MAX8925 Power Management IC"
	depends on MFD_MAX8925
	help
	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.

config REGULATOR_MAX8952
	tristate "Maxim MAX8952 Power Management IC"
	depends on I2C
	help
	  This driver controls a Maxim 8952 voltage output regulator
	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
	  modes ranging from 0.77V to 1.40V by 0.01V steps.

config REGULATOR_MAX8997
	tristate "Maxim 8997/8966 regulator"
	depends on MFD_MAX8997
	help
	  This driver controls a Maxim 8997/8966 regulator
	  via I2C bus. The provided regulator is suitable for S5PC110,
	  S5PV210, and Exynos-4 chips to control VCC_CORE and
	  VCC_USIM voltages.

config REGULATOR_MAX8998
	tristate "Maxim 8998 voltage regulator"
	depends on MFD_MAX8998
	help
	  This driver controls a Maxim 8998 voltage output regulator
	  via I2C bus. The provided regulator is suitable for S3C6410
	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.

config REGULATOR_TWL4030
	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
	depends on TWL4030_CORE
	help
	  This driver supports the voltage regulators provided by
	  this family of companion chips.

config REGULATOR_WM831X
	tristate "Wolfson Microelcronics WM831x PMIC regulators"
	depends on MFD_WM831X
	help
	  Support the voltage and current regulators of the WM831x series
	  of PMIC devices.

config REGULATOR_WM8350
	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
	depends on MFD_WM8350
	help
	  This driver provides support for the voltage and current regulators
          of the WM8350 AudioPlus PMIC.

config REGULATOR_WM8400
	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
	depends on MFD_WM8400
	help
	  This driver provides support for the voltage regulators of the
	  WM8400 AudioPlus PMIC.

config REGULATOR_WM8994
	tristate "Wolfson Microelectronics WM8994 CODEC"
	depends on MFD_WM8994
	help
	  This driver provides support for the voltage regulators on the
	  WM8994 CODEC.

config REGULATOR_DA903X
	tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC"
	depends on PMIC_DA903X
	help
	  Say y here to support the BUCKs and LDOs regulators found on
	  Dialog Semiconductor DA9030/DA9034 PMIC.

config REGULATOR_PCF50633
	tristate "PCF50633 regulator driver"
        depends on MFD_PCF50633
	help
	 Say Y here to support the voltage regulators and convertors
	 on PCF50633

config REGULATOR_LP3971
	tristate "National Semiconductors LP3971 PMIC regulator driver"
	depends on I2C
	help
	 Say Y here to support the voltage regulators and convertors
	 on National Semiconductors LP3971 PMIC

config REGULATOR_LP3972
	tristate "National Semiconductors LP3972 PMIC regulator driver"
	depends on I2C
	help
	 Say Y here to support the voltage regulators and convertors
	 on National Semiconductors LP3972 PMIC

config REGULATOR_PCAP
	tristate "PCAP2 regulator driver"
	depends on EZX_PCAP
	help
	 This driver provides support for the voltage regulators of the
	 PCAP2 PMIC.

config REGULATOR_MC13XXX_CORE
	tristate

config REGULATOR_MC13783
	tristate "Support regulators on Freescale MC13783 PMIC"
	depends on MFD_MC13783
	select REGULATOR_MC13XXX_CORE
	help
	  Say y here to support the regulators found on the Freescale MC13783
	  PMIC.

config REGULATOR_MC13892
	tristate "Support regulators on Freescale MC13892 PMIC"
	depends on MFD_MC13XXX
	select REGULATOR_MC13XXX_CORE
	help
	  Say y here to support the regulators found on the Freescale MC13892
	  PMIC.

config REGULATOR_AB3100
	tristate "ST-Ericsson AB3100 Regulator functions"
	depends on AB3100_CORE
	default y if AB3100_CORE
	help
	 These regulators correspond to functionality in the
	 AB3100 analog baseband dealing with power regulators
	 for the system.

config REGULATOR_TPS6105X
	tristate "TI TPS6105X Power regulators"
	depends on TPS6105X
	default y if TPS6105X
	help
	  This driver supports TPS61050/TPS61052 voltage regulator chips.
	  It is a single boost converter primarily for white LEDs and
	  audio amplifiers.

config REGULATOR_TPS65023
	tristate "TI TPS65023 Power regulators"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
	  three step-down converters and two general-purpose LDO voltage regulators.
	  It supports TI's software based Class-2 SmartReflex implementation.

config REGULATOR_TPS6507X
	tristate "TI TPS6507X Power regulators"
	depends on I2C
	help
	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
	  three step-down converters and two general-purpose LDO voltage regulators.
	  It supports TI's software based Class-2 SmartReflex implementation.

config REGULATOR_TPS65912
	tristate "TI TPS65912 Power regulator"
	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
	help
	    This driver supports TPS65912 voltage regulator chip.

config REGULATOR_88PM8607
	bool "Marvell 88PM8607 Power regulators"
	depends on MFD_88PM860X=y
	help
	  This driver supports 88PM8607 voltage regulator chips.

config REGULATOR_ISL6271A
	tristate "Intersil ISL6271A Power regulator"
	depends on I2C
	help
	  This driver supports ISL6271A voltage regulator chip.

config REGULATOR_AD5398
	tristate "Analog Devices AD5398/AD5821 regulators"
	depends on I2C
	help
	  This driver supports AD5398 and AD5821 current regulator chips.
	  If building into module, its name is ad5398.ko.

config REGULATOR_AB8500
	bool "ST-Ericsson AB8500 Power Regulators"
	depends on AB8500_CORE
	help
	  This driver supports the regulators found on the ST-Ericsson mixed
	  signal AB8500 PMIC

config REGULATOR_DB8500_PRCMU
	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
	depends on MFD_DB8500_PRCMU
	help
	  This driver supports the voltage domain regulators controlled by the
	  DB8500 PRCMU

config REGULATOR_TPS6586X
	tristate "TI TPS6586X Power regulators"
	depends on MFD_TPS6586X
	help
	  This driver supports TPS6586X voltage regulator chips.

config REGULATOR_TPS6524X
	tristate "TI TPS6524X Power regulators"
	depends on SPI
	help
	  This driver supports TPS6524X voltage regulator chips. TPS6524X
	  provides three step-down converters and two general-purpose LDO
	  voltage regulators.  This device is interfaced using a customized
	  serial interface currently supported on the sequencer serial
	  port controller.

config REGULATOR_TPS65910
	tristate "TI TPS65910 Power Regulator"
	depends on MFD_TPS65910
	help
	  This driver supports TPS65910 voltage regulator chips.

config REGULATOR_AAT2870
	tristate "AnalogicTech AAT2870 Regulators"
	depends on MFD_AAT2870_CORE
	help
	  If you have a AnalogicTech AAT2870 say Y to enable the
	  regulator driver.

endif
Commit	Line	Data
bbda14df	1	menuconfig REGULATOR
ba7e4763	2	bool "Voltage and Current Regulator Support"
ba7e4763 LG	3	help
	4	Generic Voltage and Current Regulator support.
	5
	6	This framework is designed to provide a generic interface to voltage
	7	and current regulators within the Linux kernel. It's intended to
	8	provide voltage and current control to client or consumer drivers and
	9	also provide status information to user space applications through a
	10	sysfs interface.
	11
	12	The intention is to allow systems to dynamically control regulator
	13	output in order to save power and prolong battery life. This applies
	14	to both voltage regulators (where voltage output is controllable) and
	15	current sinks (where current output is controllable).
	16
	17	This framework safely compiles out if not selected so that client
	18	drivers can still be used in systems with no software controllable
	19	regulators.
	20
	21	If unsure, say no.
	22
bbda14df TI	23	if REGULATOR
bbda14df TI	24
ba7e4763 LG	25	config REGULATOR_DEBUG
ba7e4763 LG	26	bool "Regulator debug support"
ba7e4763 LG	27	help
	28	Say yes here to enable debugging support.
	29
34abbd68 MB	30	config REGULATOR_DUMMY
	31	bool "Provide a dummy regulator if regulator lookups fail"
	32	help
	33	If this option is enabled then when a regulator lookup fails
	34	and the board has not specified that it has provided full
	35	constraints then the regulator core will provide an always
	36	enabled dummy regulator will be provided, allowing consumer
	37	drivers to continue.
	38
	39	A warning will be generated when this substitution is done.
	40
ba7e4763	41	config REGULATOR_FIXED_VOLTAGE
a9cb63b2	42	tristate "Fixed voltage regulator support"
a9cb63b2 MB	43	help
	44	This driver provides support for fixed voltage regulators,
	45	useful for systems which use a combination of software
	46	managed regulators and simple non-configurable regulators.
ba7e4763 LG	47
	48	config REGULATOR_VIRTUAL_CONSUMER
	49	tristate "Virtual regulator consumer support"
ba7e4763 LG	50	help
	51	This driver provides a virtual consumer for the voltage and
	52	current regulator API which provides sysfs controls for
	53	configuring the supplies requested. This is mainly useful
	54	for test purposes.
	55
	56	If unsure, say no.
	57
1d98cccf MR	58	config REGULATOR_USERSPACE_CONSUMER
1d98cccf MR	59	tristate "Userspace regulator consumer support"
1d98cccf MR	60	help
1d98cccf MR	61	There are some classes of devices that are controlled entirely
6f2653e6	62	from user space. Userspace consumer driver provides ability to
1d98cccf MR	63	control power supplies for such devices.
	64
	65	If unsure, say no.
	66
3f0292ae HS	67	config REGULATOR_GPIO
3f0292ae HS	68	tristate "GPIO regulator support"
d162b3c5	69	depends on GENERIC_GPIO
3f0292ae HS	70	help
	71	This driver provides support for regulators that can be
	72	controlled via gpios.
	73	It is capable of supporting current and voltage regulators
	74	and the platform has to provide a mapping of GPIO-states
	75	to target volts/amps.
	76
0eb5d5ab PZ	77	config REGULATOR_BQ24022
0eb5d5ab PZ	78	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
0eb5d5ab PZ	79	help
	80	This driver controls a TI bq24022 Charger attached via
	81	GPIOs. The provided current regulator can enable/disable
	82	charging select between 100 mA and 500 mA charging current
	83	limit.
	84
55f4fa4e RJ	85	config REGULATOR_MAX1586
	86	tristate "Maxim 1586/1587 voltage regulator"
	87	depends on I2C
55f4fa4e RJ	88	help
	89	This driver controls a Maxim 1586 or 1587 voltage output
	90	regulator via I2C bus. The provided regulator is suitable
	91	for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
	92
a71b797f HZ	93	config REGULATOR_MAX8649
	94	tristate "Maxim 8649 voltage regulator"
	95	depends on I2C
	96	help
	97	This driver controls a Maxim 8649 voltage output regulator via
	98	I2C bus.
	99
27f37e4b WS	100	config REGULATOR_MAX8660
	101	tristate "Maxim 8660/8661 voltage regulator"
	102	depends on I2C
	103	help
	104	This driver controls a Maxim 8660/8661 voltage output
	105	regulator via I2C bus.
	106
08ff6f2a HZ	107	config REGULATOR_MAX8925
	108	tristate "Maxim MAX8925 Power Management IC"
	109	depends on MFD_MAX8925
	110	help
	111	Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
	112
202f4f53 MH	113	config REGULATOR_MAX8952
	114	tristate "Maxim MAX8952 Power Management IC"
	115	depends on I2C
	116	help
	117	This driver controls a Maxim 8952 voltage output regulator
	118	via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
	119	modes ranging from 0.77V to 1.40V by 0.01V steps.
	120
bd6ca2cf MH	121	config REGULATOR_MAX8997
	122	tristate "Maxim 8997/8966 regulator"
	123	depends on MFD_MAX8997
	124	help
	125	This driver controls a Maxim 8997/8966 regulator
	126	via I2C bus. The provided regulator is suitable for S5PC110,
	127	S5PV210, and Exynos-4 chips to control VCC_CORE and
	128	VCC_USIM voltages.
	129
156f2528 KP	130	config REGULATOR_MAX8998
156f2528 KP	131	tristate "Maxim 8998 voltage regulator"
69f71008	132	depends on MFD_MAX8998
156f2528 KP	133	help
	134	This driver controls a Maxim 8998 voltage output regulator
	135	via I2C bus. The provided regulator is suitable for S3C6410
	136	and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
	137
fa16a5c1	138	config REGULATOR_TWL4030
fb7c18ca	139	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
fa16a5c1 DB	140	depends on TWL4030_CORE
	141	help
	142	This driver supports the voltage regulators provided by
	143	this family of companion chips.
	144
e4ee831f MB	145	config REGULATOR_WM831X
	146	tristate "Wolfson Microelcronics WM831x PMIC regulators"
	147	depends on MFD_WM831X
	148	help
	149	Support the voltage and current regulators of the WM831x series
	150	of PMIC devices.
	151
da09155a	152	config REGULATOR_WM8350
79ac9bc3	153	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
da09155a	154	depends on MFD_WM8350
da09155a MB	155	help
	156	This driver provides support for the voltage and current regulators
	157	of the WM8350 AudioPlus PMIC.
	158
42fad570	159	config REGULATOR_WM8400
79ac9bc3	160	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
42fad570	161	depends on MFD_WM8400
42fad570 MB	162	help
	163	This driver provides support for the voltage regulators of the
	164	WM8400 AudioPlus PMIC.
69dc16c3 MB	165
	166	config REGULATOR_WM8994
	167	tristate "Wolfson Microelectronics WM8994 CODEC"
	168	depends on MFD_WM8994
	169	help
	170	This driver provides support for the voltage regulators on the
	171	WM8994 CODEC.
da09155a	172
129eef96 EM	173	config REGULATOR_DA903X
	174	tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC"
	175	depends on PMIC_DA903X
129eef96 EM	176	help
	177	Say y here to support the BUCKs and LDOs regulators found on
	178	Dialog Semiconductor DA9030/DA9034 PMIC.
	179
5ec271e7 BR	180	config REGULATOR_PCF50633
	181	tristate "PCF50633 regulator driver"
	182	depends on MFD_PCF50633
	183	help
	184	Say Y here to support the voltage regulators and convertors
	185	on PCF50633
	186
0cbdf7bc MS	187	config REGULATOR_LP3971
	188	tristate "National Semiconductors LP3971 PMIC regulator driver"
	189	depends on I2C
	190	help
	191	Say Y here to support the voltage regulators and convertors
	192	on National Semiconductors LP3971 PMIC
	193
5976f095 AL	194	config REGULATOR_LP3972
	195	tristate "National Semiconductors LP3972 PMIC regulator driver"
	196	depends on I2C
	197	help
	198	Say Y here to support the voltage regulators and convertors
	199	on National Semiconductors LP3972 PMIC
	200
39b1772a DR	201	config REGULATOR_PCAP
	202	tristate "PCAP2 regulator driver"
	203	depends on EZX_PCAP
	204	help
	205	This driver provides support for the voltage regulators of the
	206	PCAP2 PMIC.
	207
167e3d8a	208	config REGULATOR_MC13XXX_CORE
4d7071f1	209	tristate
167e3d8a	210
295c08bc SH	211	config REGULATOR_MC13783
	212	tristate "Support regulators on Freescale MC13783 PMIC"
	213	depends on MFD_MC13783
167e3d8a	214	select REGULATOR_MC13XXX_CORE
295c08bc SH	215	help
	216	Say y here to support the regulators found on the Freescale MC13783
	217	PMIC.
	218
5e428d5c YS	219	config REGULATOR_MC13892
	220	tristate "Support regulators on Freescale MC13892 PMIC"
	221	depends on MFD_MC13XXX
	222	select REGULATOR_MC13XXX_CORE
	223	help
	224	Say y here to support the regulators found on the Freescale MC13892
	225	PMIC.
	226
d619bc14 LW	227	config REGULATOR_AB3100
	228	tristate "ST-Ericsson AB3100 Regulator functions"
	229	depends on AB3100_CORE
	230	default y if AB3100_CORE
	231	help
	232	These regulators correspond to functionality in the
	233	AB3100 analog baseband dealing with power regulators
	234	for the system.
	235
2edd3b69 LW	236	config REGULATOR_TPS6105X
	237	tristate "TI TPS6105X Power regulators"
	238	depends on TPS6105X
	239	default y if TPS6105X
	240	help
	241	This driver supports TPS61050/TPS61052 voltage regulator chips.
	242	It is a single boost converter primarily for white LEDs and
	243	audio amplifiers.
	244
2de79850 AA	245	config REGULATOR_TPS65023
	246	tristate "TI TPS65023 Power regulators"
	247	depends on I2C
90923351	248	select REGMAP_I2C
2de79850 AA	249	help
	250	This driver supports TPS65023 voltage regulator chips. TPS65023 provides
	251	three step-down converters and two general-purpose LDO voltage regulators.
	252	It supports TI's software based Class-2 SmartReflex implementation.
	253
	254	config REGULATOR_TPS6507X
	255	tristate "TI TPS6507X Power regulators"
	256	depends on I2C
	257	help
	258	This driver supports TPS6507X voltage regulator chips. TPS6507X provides
	259	three step-down converters and two general-purpose LDO voltage regulators.
	260	It supports TI's software based Class-2 SmartReflex implementation.
	261
9260ad98 MO	262	config REGULATOR_TPS65912
	263	tristate "TI TPS65912 Power regulator"
	264	depends on (MFD_TPS65912_I2C \|\| MFD_TPS65912_SPI)
	265	help
	266	This driver supports TPS65912 voltage regulator chip.
	267
be0e2d3e HZ	268	config REGULATOR_88PM8607
be0e2d3e HZ	269	bool "Marvell 88PM8607 Power regulators"
2cc50bee	270	depends on MFD_88PM860X=y
be0e2d3e HZ	271	help
	272	This driver supports 88PM8607 voltage regulator chips.
	273
51bd6943 MV	274	config REGULATOR_ISL6271A
	275	tristate "Intersil ISL6271A Power regulator"
	276	depends on I2C
	277	help
	278	This driver supports ISL6271A voltage regulator chip.
	279
8b385d9b SZ	280	config REGULATOR_AD5398
	281	tristate "Analog Devices AD5398/AD5821 regulators"
	282	depends on I2C
	283	help
	284	This driver supports AD5398 and AD5821 current regulator chips.
	285	If building into module, its name is ad5398.ko.
c789ca20 SI	286
	287	config REGULATOR_AB8500
	288	bool "ST-Ericsson AB8500 Power Regulators"
	289	depends on AB8500_CORE
	290	help
	291	This driver supports the regulators found on the ST-Ericsson mixed
	292	signal AB8500 PMIC
	293
1032fbfd BJ	294	config REGULATOR_DB8500_PRCMU
	295	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
	296	depends on MFD_DB8500_PRCMU
	297	help
	298	This driver supports the voltage domain regulators controlled by the
	299	DB8500 PRCMU
	300
49610235 MR	301	config REGULATOR_TPS6586X
49610235 MR	302	tristate "TI TPS6586X Power regulators"
1b13f4bb	303	depends on MFD_TPS6586X
49610235 MR	304	help
	305	This driver supports TPS6586X voltage regulator chips.
	306
1394fd28 CC	307	config REGULATOR_TPS6524X
	308	tristate "TI TPS6524X Power regulators"
	309	depends on SPI
	310	help
	311	This driver supports TPS6524X voltage regulator chips. TPS6524X
	312	provides three step-down converters and two general-purpose LDO
	313	voltage regulators. This device is interfaced using a customized
	314	serial interface currently supported on the sequencer serial
	315	port controller.
	316
518fb721 GG	317	config REGULATOR_TPS65910
	318	tristate "TI TPS65910 Power Regulator"
	319	depends on MFD_TPS65910
	320	help
	321	This driver supports TPS65910 voltage regulator chips.
	322
f7eb6c5e JP	323	config REGULATOR_AAT2870
	324	tristate "AnalogicTech AAT2870 Regulators"
	325	depends on MFD_AAT2870_CORE
	326	help
	327	If you have a AnalogicTech AAT2870 say Y to enable the
	328	regulator driver.
	329
bbda14df	330	endif
295c08bc	331