[deliverable/linux.git] / drivers / regulator / Kconfig

menuconfig REGULATOR
	bool "Voltage and Current Regulator Support"
	help
	  Generic Voltage and Current Regulator support.

	  This framework is designed to provide a generic interface to voltage
	  and current regulators within the Linux kernel. It's intended to
	  provide voltage and current control to client or consumer drivers and
	  also provide status information to user space applications through a
	  sysfs interface.

	  The intention is to allow systems to dynamically control regulator
	  output in order to save power and prolong battery life. This applies
	  to both voltage regulators (where voltage output is controllable) and
	  current sinks (where current output is controllable).

	  This framework safely compiles out if not selected so that client
	  drivers can still be used in systems with no software controllable
	  regulators.

	  If unsure, say no.


if REGULATOR

config REGULATOR_DEBUG
	bool "Regulator debug support"
	help
	  Say yes here to enable debugging support.

config REGULATOR_DUMMY
	bool "Provide a dummy regulator if regulator lookups fail"
	help
	  If this option is enabled then when a regulator lookup fails
	  and the board has not specified that it has provided full
	  constraints the regulator core will provide an always
	  enabled dummy regulator, allowing consumer drivers to continue.

	  A warning will be generated when this substitution is done.

config REGULATOR_FIXED_VOLTAGE
	tristate "Fixed voltage regulator support"
	help
	  This driver provides support for fixed voltage regulators,
	  useful for systems which use a combination of software
	  managed regulators and simple non-configurable regulators.

config REGULATOR_VIRTUAL_CONSUMER
	tristate "Virtual regulator consumer support"
	help
	  This driver provides a virtual consumer for the voltage and
	  current regulator API which provides sysfs controls for
	  configuring the supplies requested.  This is mainly useful
	  for test purposes.

	  If unsure, say no.

config REGULATOR_USERSPACE_CONSUMER
	tristate "Userspace regulator consumer support"
	help
	  There are some classes of devices that are controlled entirely
	  from user space. Userspace consumer driver provides ability to
	  control power supplies for such devices.

	  If unsure, say no.

config REGULATOR_88PM800
	tristate "Marvell 88PM800 Power regulators"
	depends on MFD_88PM800=y
	help
	  This driver supports Marvell 88PM800 voltage regulator chips.
	  It delivers digitally programmable output,
	  the voltage is programmed via I2C interface.
	  It's suitable to support PXA988 chips to control VCC_MAIN and
	  various voltages.

config REGULATOR_88PM8607
	bool "Marvell 88PM8607 Power regulators"
	depends on MFD_88PM860X=y
	help
	  This driver supports 88PM8607 voltage regulator chips.

config REGULATOR_AD5398
	tristate "Analog Devices AD5398/AD5821 regulators"
	depends on I2C
	help
	  This driver supports AD5398 and AD5821 current regulator chips.
	  If building into module, its name is ad5398.ko.

config REGULATOR_ANATOP
	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
	depends on MFD_SYSCON
	help
	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
	  regulators. It is recommended that this option be
	  enabled on i.MX6 platform.

config REGULATOR_AAT2870
	tristate "AnalogicTech AAT2870 Regulators"
	depends on MFD_AAT2870_CORE
	help
	  If you have a AnalogicTech AAT2870 say Y to enable the
	  regulator driver.

config REGULATOR_AB3100
	tristate "ST-Ericsson AB3100 Regulator functions"
	depends on AB3100_CORE
	default y if AB3100_CORE
	help
	 These regulators correspond to functionality in the
	 AB3100 analog baseband dealing with power regulators
	 for the system.

config REGULATOR_AB8500
	bool "ST-Ericsson AB8500 Power Regulators"
	depends on AB8500_CORE
	help
	  This driver supports the regulators found on the ST-Ericsson mixed
	  signal AB8500 PMIC

config REGULATOR_ARIZONA
	tristate "Wolfson Arizona class devices"
	depends on MFD_ARIZONA
	depends on SND_SOC
	help
	  Support for the regulators found on Wolfson Arizona class
	  devices.

config REGULATOR_AS3711
	tristate "AS3711 PMIC"
	depends on MFD_AS3711
	help
	  This driver provides support for the voltage regulators on the
	  AS3711 PMIC

config REGULATOR_DA903X
	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
	depends on PMIC_DA903X
	help
	  Say y here to support the BUCKs and LDOs regulators found on
	  Dialog Semiconductor DA9030/DA9034 PMIC.

config REGULATOR_DA9052
	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
	depends on PMIC_DA9052
	help
	  This driver supports the voltage regulators of DA9052-BC and
	  DA9053-AA/Bx PMIC.

config REGULATOR_DA9055
	tristate "Dialog Semiconductor DA9055 regulators"
	depends on MFD_DA9055
	help
	  Say y here to support the BUCKs and LDOs regulators found on
	  Dialog Semiconductor DA9055 PMIC.

	  This driver can also be built as a module. If so, the module
	  will be called da9055-regulator.

config REGULATOR_DBX500_PRCMU
	bool

config REGULATOR_DB8500_PRCMU
	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
	depends on MFD_DB8500_PRCMU
	select REGULATOR_DBX500_PRCMU
	help
	  This driver supports the voltage domain regulators controlled by the
	  DB8500 PRCMU

config REGULATOR_FAN53555
	tristate "Fairchild FAN53555 Regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports Fairchild FAN53555 Digitally Programmable
	  TinyBuck Regulator. The FAN53555 is a step-down switching voltage
	  regulator that delivers a digitally programmable output from an
	  input voltage supply of 2.5V to 5.5V. The output voltage is
	  programmed through an I2C interface.

config REGULATOR_GPIO
	tristate "GPIO regulator support"
	depends on GPIOLIB
	help
	  This driver provides support for regulators that can be
	  controlled via gpios.
	  It is capable of supporting current and voltage regulators
	  and the platform has to provide a mapping of GPIO-states
	  to target volts/amps.

config REGULATOR_ISL6271A
	tristate "Intersil ISL6271A Power regulator"
	depends on I2C
	help
	  This driver supports ISL6271A voltage regulator chip.

config REGULATOR_LP3971
	tristate "National Semiconductors LP3971 PMIC regulator driver"
	depends on I2C
	help
	 Say Y here to support the voltage regulators and convertors
	 on National Semiconductors LP3971 PMIC

config REGULATOR_LP3972
	tristate "National Semiconductors LP3972 PMIC regulator driver"
	depends on I2C
	help
	 Say Y here to support the voltage regulators and convertors
	 on National Semiconductors LP3972 PMIC

config REGULATOR_LP872X
	bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
	depends on I2C=y
	select REGMAP_I2C
	help
	  This driver supports LP8720/LP8725 PMIC

config REGULATOR_LP8755
	tristate "TI LP8755 High Performance PMU driver"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports LP8755 High Performance PMU driver. This
	  chip contains six step-down DC/DC converters which can support
	  9 mode multiphase configuration.

config REGULATOR_LP8788
	bool "TI LP8788 Power Regulators"
	depends on MFD_LP8788
	help
	  This driver supports LP8788 voltage regulator chip.

config REGULATOR_MAX1586
	tristate "Maxim 1586/1587 voltage regulator"
	depends on I2C
	help
	  This driver controls a Maxim 1586 or 1587 voltage output
	  regulator via I2C bus. The provided regulator is suitable
	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.

config REGULATOR_MAX8649
	tristate "Maxim 8649 voltage regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver controls a Maxim 8649 voltage output regulator via
	  I2C bus.

config REGULATOR_MAX8660
	tristate "Maxim 8660/8661 voltage regulator"
	depends on I2C
	help
	  This driver controls a Maxim 8660/8661 voltage output
	  regulator via I2C bus.

config REGULATOR_MAX8907
	tristate "Maxim 8907 voltage regulator"
	depends on MFD_MAX8907
	help
	  This driver controls a Maxim 8907 voltage output regulator
	  via I2C bus. The provided regulator is suitable for Tegra
	  chip to control Step-Down DC-DC and LDOs.

config REGULATOR_MAX8925
	tristate "Maxim MAX8925 Power Management IC"
	depends on MFD_MAX8925
	help
	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.

config REGULATOR_MAX8952
	tristate "Maxim MAX8952 Power Management IC"
	depends on I2C
	help
	  This driver controls a Maxim 8952 voltage output regulator
	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
	  modes ranging from 0.77V to 1.40V by 0.01V steps.

config REGULATOR_MAX8973
	tristate "Maxim MAX8973 voltage regulator "
	depends on I2C
	select REGMAP_I2C
	help
	  The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
	  switching regulator delievers up to 9A of output current. Each
	  phase operates at a 2MHz fixed frequency with a 120 deg shift
	  from the adjacent phase, allowing the use of small magnetic component.

config REGULATOR_MAX8997
	tristate "Maxim 8997/8966 regulator"
	depends on MFD_MAX8997
	help
	  This driver controls a Maxim 8997/8966 regulator
	  via I2C bus. The provided regulator is suitable for S5PC110,
	  S5PV210, and Exynos-4 chips to control VCC_CORE and
	  VCC_USIM voltages.

config REGULATOR_MAX8998
	tristate "Maxim 8998 voltage regulator"
	depends on MFD_MAX8998
	help
	  This driver controls a Maxim 8998 voltage output regulator
	  via I2C bus. The provided regulator is suitable for S3C6410
	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.

config REGULATOR_MAX77686
	tristate "Maxim 77686 regulator"
	depends on MFD_MAX77686
	help
	  This driver controls a Maxim 77686 regulator
	  via I2C bus. The provided regulator is suitable for
	  Exynos-4 chips to control VARM and VINT voltages.

config REGULATOR_MAX77693
	tristate "Maxim MAX77693 regulator"
	depends on MFD_MAX77693
	help
	  This driver controls a Maxim 77693 regulator via I2C bus.
	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
	  and one current regulator 'CHARGER'. This is suitable for
	  Exynos-4x12 chips.

config REGULATOR_MC13XXX_CORE
	tristate

config REGULATOR_MC13783
	tristate "Freescale MC13783 regulator driver"
	depends on MFD_MC13783
	select REGULATOR_MC13XXX_CORE
	help
	  Say y here to support the regulators found on the Freescale MC13783
	  PMIC.

config REGULATOR_MC13892
	tristate "Freescale MC13892 regulator driver"
	depends on MFD_MC13XXX
	select REGULATOR_MC13XXX_CORE
	help
	  Say y here to support the regulators found on the Freescale MC13892
	  PMIC.

config REGULATOR_PALMAS
	tristate "TI Palmas PMIC Regulators"
	depends on MFD_PALMAS
	help
	  If you wish to control the regulators on the Palmas series of
	  chips say Y here. This will enable support for all the software
	  controllable SMPS/LDO regulators.

	  The regulators available on Palmas series chips vary depending
	  on the muxing. This is handled automatically in the driver by
	  reading the mux info from OTP.

config REGULATOR_PCAP
	tristate "Motorola PCAP2 regulator driver"
	depends on EZX_PCAP
	help
	 This driver provides support for the voltage regulators of the
	 PCAP2 PMIC.

config REGULATOR_PCF50633
	tristate "NXP PCF50633 regulator driver"
	depends on MFD_PCF50633
	help
	 Say Y here to support the voltage regulators and convertors
	 on PCF50633

config REGULATOR_RC5T583
	tristate "RICOH RC5T583 Power regulators"
	depends on MFD_RC5T583
	help
	  Select this option to enable the power regulator of RICOH
	  PMIC RC5T583.
	  This driver supports the control of different power rails of device
	  through regulator interface. The device supports multiple DCDC/LDO
	  outputs which can be controlled by i2c communication.

config REGULATOR_S2MPS11
	tristate "Samsung S2MPS11 voltage regulator"
	depends on MFD_SEC_CORE
	help
	 This driver supports a Samsung S2MPS11 voltage output regulator
	 via I2C bus. S2MPS11 is comprised of high efficient Buck converters
	 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.

config REGULATOR_S5M8767
	tristate "Samsung S5M8767A voltage regulator"
	depends on MFD_SEC_CORE
	help
	 This driver supports a Samsung S5M8767A voltage output regulator
	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
	 supports DVS mode with 8bits of output voltage control.

config REGULATOR_TI_ABB
	bool "TI Adaptive Body Bias on-chip LDO"
	depends on ARCH_OMAP
	help
	  Select this option to support Texas Instruments' on-chip Adaptive Body
	  Bias (ABB) LDO regulators. It is recommended that this option be
	  enabled on required TI SoC. Certain Operating Performance Points
	  on TI SoCs may be unstable without enabling this as it provides
	  device specific optimized bias to allow/optimize functionality.

config REGULATOR_TPS51632
	tristate "TI TPS51632 Power Regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports TPS51632 voltage regulator chip.
	  The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
	  with Serial VID control and DVFS.
	  The voltage output can be configure through I2C interface or PWM
	  interface.

config REGULATOR_TPS6105X
	tristate "TI TPS6105X Power regulators"
	depends on TPS6105X
	default y if TPS6105X
	help
	  This driver supports TPS61050/TPS61052 voltage regulator chips.
	  It is a single boost converter primarily for white LEDs and
	  audio amplifiers.

config REGULATOR_TPS62360
	tristate "TI TPS6236x Power Regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports TPS6236x voltage regulator chip. This
	  regulator is meant for processor core supply. This chip is
	  high-frequency synchronous step down dc-dc converter optimized
	  for battery-powered portable applications.

config REGULATOR_TPS65023
	tristate "TI TPS65023 Power regulators"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
	  three step-down converters and two general-purpose LDO voltage regulators.
	  It supports TI's software based Class-2 SmartReflex implementation.

config REGULATOR_TPS6507X
	tristate "TI TPS6507X Power regulators"
	depends on I2C
	help
	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
	  three step-down converters and two general-purpose LDO voltage regulators.
	  It supports TI's software based Class-2 SmartReflex implementation.

config REGULATOR_TPS65090
	tristate "TI TPS65090 Power regulator"
	depends on MFD_TPS65090
	help
	  This driver provides support for the voltage regulators on the
	  TI TPS65090 PMIC.

config REGULATOR_TPS65217
	tristate "TI TPS65217 Power regulators"
	depends on MFD_TPS65217
	help
	  This driver supports TPS65217 voltage regulator chips. TPS65217
	  provides three step-down converters and four general-purpose LDO
	  voltage regulators. It supports software based voltage control
	  for different voltage domains

config REGULATOR_TPS6524X
	tristate "TI TPS6524X Power regulators"
	depends on SPI
	help
	  This driver supports TPS6524X voltage regulator chips. TPS6524X
	  provides three step-down converters and two general-purpose LDO
	  voltage regulators.  This device is interfaced using a customized
	  serial interface currently supported on the sequencer serial
	  port controller.

config REGULATOR_TPS6586X
	tristate "TI TPS6586X Power regulators"
	depends on MFD_TPS6586X
	help
	  This driver supports TPS6586X voltage regulator chips.

config REGULATOR_TPS65910
	tristate "TI TPS65910/TPS65911 Power Regulators"
	depends on MFD_TPS65910
	help
	  This driver supports TPS65910/TPS65911 voltage regulator chips.

config REGULATOR_TPS65912
	tristate "TI TPS65912 Power regulator"
	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
	help
	    This driver supports TPS65912 voltage regulator chip.

config REGULATOR_TPS80031
	tristate "TI TPS80031/TPS80032 power regualtor driver"
	depends on MFD_TPS80031
	help
	  TPS80031/ TPS80032 Fully Integrated Power Management with Power
	  Path and Battery Charger. It has 5 configurable step-down
	  converters, 11 general purpose LDOs, VBUS generator and digital
	  output to control regulators.

config REGULATOR_TWL4030
	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
	depends on TWL4030_CORE
	help
	  This driver supports the voltage regulators provided by
	  this family of companion chips.

config REGULATOR_VEXPRESS
	tristate "Versatile Express regulators"
	depends on VEXPRESS_CONFIG
	help
	  This driver provides support for voltage regulators available
	  on the ARM Ltd's Versatile Express platform.

config REGULATOR_WM831X
	tristate "Wolfson Microelectronics WM831x PMIC regulators"
	depends on MFD_WM831X
	help
	  Support the voltage and current regulators of the WM831x series
	  of PMIC devices.

config REGULATOR_WM8350
	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
	depends on MFD_WM8350
	help
	  This driver provides support for the voltage and current regulators
	  of the WM8350 AudioPlus PMIC.

config REGULATOR_WM8400
	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
	depends on MFD_WM8400
	help
	  This driver provides support for the voltage regulators of the
	  WM8400 AudioPlus PMIC.

config REGULATOR_WM8994
	tristate "Wolfson Microelectronics WM8994 CODEC"
	depends on MFD_WM8994
	help
	  This driver provides support for the voltage regulators on the
	  WM8994 CODEC.

endif
Commit	Line	Data
bbda14df	1	menuconfig REGULATOR
ba7e4763	2	bool "Voltage and Current Regulator Support"
ba7e4763 LG	3	help
	4	Generic Voltage and Current Regulator support.
	5
	6	This framework is designed to provide a generic interface to voltage
	7	and current regulators within the Linux kernel. It's intended to
	8	provide voltage and current control to client or consumer drivers and
	9	also provide status information to user space applications through a
	10	sysfs interface.
	11
	12	The intention is to allow systems to dynamically control regulator
	13	output in order to save power and prolong battery life. This applies
	14	to both voltage regulators (where voltage output is controllable) and
	15	current sinks (where current output is controllable).
	16
	17	This framework safely compiles out if not selected so that client
	18	drivers can still be used in systems with no software controllable
	19	regulators.
	20
	21	If unsure, say no.
	22
809d310c	23
bbda14df TI	24	if REGULATOR
bbda14df TI	25
ba7e4763 LG	26	config REGULATOR_DEBUG
ba7e4763 LG	27	bool "Regulator debug support"
ba7e4763 LG	28	help
	29	Say yes here to enable debugging support.
	30
34abbd68 MB	31	config REGULATOR_DUMMY
	32	bool "Provide a dummy regulator if regulator lookups fail"
	33	help
	34	If this option is enabled then when a regulator lookup fails
	35	and the board has not specified that it has provided full
4f842f6b MB	36	constraints the regulator core will provide an always
4f842f6b MB	37	enabled dummy regulator, allowing consumer drivers to continue.
34abbd68 MB	38
	39	A warning will be generated when this substitution is done.
	40
ba7e4763	41	config REGULATOR_FIXED_VOLTAGE
a9cb63b2	42	tristate "Fixed voltage regulator support"
a9cb63b2 MB	43	help
	44	This driver provides support for fixed voltage regulators,
	45	useful for systems which use a combination of software
	46	managed regulators and simple non-configurable regulators.
ba7e4763 LG	47
	48	config REGULATOR_VIRTUAL_CONSUMER
	49	tristate "Virtual regulator consumer support"
ba7e4763 LG	50	help
ba7e4763 LG	51	This driver provides a virtual consumer for the voltage and
c6d678b6 MJ	52	current regulator API which provides sysfs controls for
	53	configuring the supplies requested. This is mainly useful
	54	for test purposes.
ba7e4763	55
c6d678b6	56	If unsure, say no.
ba7e4763	57
1d98cccf MR	58	config REGULATOR_USERSPACE_CONSUMER
1d98cccf MR	59	tristate "Userspace regulator consumer support"
1d98cccf MR	60	help
1d98cccf MR	61	There are some classes of devices that are controlled entirely
6f2653e6	62	from user space. Userspace consumer driver provides ability to
1d98cccf MR	63	control power supplies for such devices.
1d98cccf MR	64
c6d678b6	65	If unsure, say no.
1d98cccf	66
95f1dc08 CX	67	config REGULATOR_88PM800
	68	tristate "Marvell 88PM800 Power regulators"
	69	depends on MFD_88PM800=y
	70	help
	71	This driver supports Marvell 88PM800 voltage regulator chips.
	72	It delivers digitally programmable output,
	73	the voltage is programmed via I2C interface.
	74	It's suitable to support PXA988 chips to control VCC_MAIN and
	75	various voltages.
	76
82b736df MB	77	config REGULATOR_88PM8607
	78	bool "Marvell 88PM8607 Power regulators"
	79	depends on MFD_88PM860X=y
3f0292ae	80	help
82b736df	81	This driver supports 88PM8607 voltage regulator chips.
3f0292ae	82
dfb9b8a4 AL	83	config REGULATOR_AD5398
	84	tristate "Analog Devices AD5398/AD5821 regulators"
	85	depends on I2C
0eb5d5ab	86	help
dfb9b8a4 AL	87	This driver supports AD5398 and AD5821 current regulator chips.
	88	If building into module, its name is ad5398.ko.
	89
82b736df MB	90	config REGULATOR_ANATOP
	91	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
	92	depends on MFD_SYSCON
	93	help
	94	Say y here to support Freescale i.MX on-chip ANATOP LDOs
	95	regulators. It is recommended that this option be
	96	enabled on i.MX6 platform.
	97
dfb9b8a4 AL	98	config REGULATOR_AAT2870
	99	tristate "AnalogicTech AAT2870 Regulators"
	100	depends on MFD_AAT2870_CORE
	101	help
	102	If you have a AnalogicTech AAT2870 say Y to enable the
	103	regulator driver.
	104
82b736df MB	105	config REGULATOR_AB3100
	106	tristate "ST-Ericsson AB3100 Regulator functions"
	107	depends on AB3100_CORE
	108	default y if AB3100_CORE
	109	help
	110	These regulators correspond to functionality in the
	111	AB3100 analog baseband dealing with power regulators
	112	for the system.
	113
	114	config REGULATOR_AB8500
	115	bool "ST-Ericsson AB8500 Power Regulators"
	116	depends on AB8500_CORE
	117	help
	118	This driver supports the regulators found on the ST-Ericsson mixed
	119	signal AB8500 PMIC
	120
b667a45d MB	121	config REGULATOR_ARIZONA
	122	tristate "Wolfson Arizona class devices"
	123	depends on MFD_ARIZONA
e6ed9058	124	depends on SND_SOC
b667a45d MB	125	help
	126	Support for the regulators found on Wolfson Arizona class
	127	devices.
	128
82b736df MB	129	config REGULATOR_AS3711
	130	tristate "AS3711 PMIC"
	131	depends on MFD_AS3711
	132	help
	133	This driver provides support for the voltage regulators on the
	134	AS3711 PMIC
	135
dfb9b8a4 AL	136	config REGULATOR_DA903X
	137	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
	138	depends on PMIC_DA903X
	139	help
	140	Say y here to support the BUCKs and LDOs regulators found on
	141	Dialog Semiconductor DA9030/DA9034 PMIC.
	142
	143	config REGULATOR_DA9052
	144	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
	145	depends on PMIC_DA9052
	146	help
	147	This driver supports the voltage regulators of DA9052-BC and
	148	DA9053-AA/Bx PMIC.
	149
f6130be6 AJ	150	config REGULATOR_DA9055
	151	tristate "Dialog Semiconductor DA9055 regulators"
	152	depends on MFD_DA9055
	153	help
	154	Say y here to support the BUCKs and LDOs regulators found on
	155	Dialog Semiconductor DA9055 PMIC.
	156
	157	This driver can also be built as a module. If so, the module
	158	will be called da9055-regulator.
	159
82b736df MB	160	config REGULATOR_DBX500_PRCMU
	161	bool
	162
	163	config REGULATOR_DB8500_PRCMU
	164	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
	165	depends on MFD_DB8500_PRCMU
	166	select REGULATOR_DBX500_PRCMU
	167	help
	168	This driver supports the voltage domain regulators controlled by the
	169	DB8500 PRCMU
	170
49d8c599 YZ	171	config REGULATOR_FAN53555
	172	tristate "Fairchild FAN53555 Regulator"
	173	depends on I2C
	174	select REGMAP_I2C
	175	help
	176	This driver supports Fairchild FAN53555 Digitally Programmable
	177	TinyBuck Regulator. The FAN53555 is a step-down switching voltage
	178	regulator that delivers a digitally programmable output from an
	179	input voltage supply of 2.5V to 5.5V. The output voltage is
	180	programmed through an I2C interface.
	181
82b736df MB	182	config REGULATOR_GPIO
	183	tristate "GPIO regulator support"
	184	depends on GPIOLIB
e3e5aff7	185	help
82b736df MB	186	This driver provides support for regulators that can be
	187	controlled via gpios.
	188	It is capable of supporting current and voltage regulators
	189	and the platform has to provide a mapping of GPIO-states
	190	to target volts/amps.
e3e5aff7	191
82b736df MB	192	config REGULATOR_ISL6271A
	193	tristate "Intersil ISL6271A Power regulator"
	194	depends on I2C
	195	help
	196	This driver supports ISL6271A voltage regulator chip.
dfb9b8a4	197
82b736df MB	198	config REGULATOR_LP3971
	199	tristate "National Semiconductors LP3971 PMIC regulator driver"
	200	depends on I2C
dfb9b8a4	201	help
82b736df MB	202	Say Y here to support the voltage regulators and convertors
82b736df MB	203	on National Semiconductors LP3971 PMIC
dfb9b8a4	204
82b736df MB	205	config REGULATOR_LP3972
	206	tristate "National Semiconductors LP3972 PMIC regulator driver"
	207	depends on I2C
dfb9b8a4	208	help
82b736df MB	209	Say Y here to support the voltage regulators and convertors
82b736df MB	210	on National Semiconductors LP3972 PMIC
dfb9b8a4	211
82b736df MB	212	config REGULATOR_LP872X
	213	bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
	214	depends on I2C=y
	215	select REGMAP_I2C
	216	help
	217	This driver supports LP8720/LP8725 PMIC
	218
	219	config REGULATOR_LP8755
	220	tristate "TI LP8755 High Performance PMU driver"
dfb9b8a4	221	depends on I2C
82b736df	222	select REGMAP_I2C
dfb9b8a4	223	help
82b736df MB	224	This driver supports LP8755 High Performance PMU driver. This
	225	chip contains six step-down DC/DC converters which can support
	226	9 mode multiphase configuration.
dfb9b8a4	227
82b736df MB	228	config REGULATOR_LP8788
	229	bool "TI LP8788 Power Regulators"
	230	depends on MFD_LP8788
dfb9b8a4	231	help
82b736df	232	This driver supports LP8788 voltage regulator chip.
0eb5d5ab	233
55f4fa4e RJ	234	config REGULATOR_MAX1586
	235	tristate "Maxim 1586/1587 voltage regulator"
	236	depends on I2C
55f4fa4e RJ	237	help
	238	This driver controls a Maxim 1586 or 1587 voltage output
	239	regulator via I2C bus. The provided regulator is suitable
	240	for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
	241
a71b797f HZ	242	config REGULATOR_MAX8649
	243	tristate "Maxim 8649 voltage regulator"
	244	depends on I2C
c5b68d47	245	select REGMAP_I2C
a71b797f HZ	246	help
	247	This driver controls a Maxim 8649 voltage output regulator via
	248	I2C bus.
	249
27f37e4b WS	250	config REGULATOR_MAX8660
	251	tristate "Maxim 8660/8661 voltage regulator"
	252	depends on I2C
	253	help
	254	This driver controls a Maxim 8660/8661 voltage output
	255	regulator via I2C bus.
	256
ffee1909 GY	257	config REGULATOR_MAX8907
	258	tristate "Maxim 8907 voltage regulator"
	259	depends on MFD_MAX8907
	260	help
	261	This driver controls a Maxim 8907 voltage output regulator
	262	via I2C bus. The provided regulator is suitable for Tegra
	263	chip to control Step-Down DC-DC and LDOs.
	264
08ff6f2a HZ	265	config REGULATOR_MAX8925
	266	tristate "Maxim MAX8925 Power Management IC"
	267	depends on MFD_MAX8925
	268	help
	269	Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
	270
202f4f53 MH	271	config REGULATOR_MAX8952
	272	tristate "Maxim MAX8952 Power Management IC"
	273	depends on I2C
	274	help
	275	This driver controls a Maxim 8952 voltage output regulator
	276	via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
	277	modes ranging from 0.77V to 1.40V by 0.01V steps.
	278
5928f538 LD	279	config REGULATOR_MAX8973
	280	tristate "Maxim MAX8973 voltage regulator "
	281	depends on I2C
	282	select REGMAP_I2C
	283	help
	284	The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
	285	switching regulator delievers up to 9A of output current. Each
	286	phase operates at a 2MHz fixed frequency with a 120 deg shift
	287	from the adjacent phase, allowing the use of small magnetic component.
	288
bd6ca2cf MH	289	config REGULATOR_MAX8997
	290	tristate "Maxim 8997/8966 regulator"
	291	depends on MFD_MAX8997
	292	help
	293	This driver controls a Maxim 8997/8966 regulator
	294	via I2C bus. The provided regulator is suitable for S5PC110,
	295	S5PV210, and Exynos-4 chips to control VCC_CORE and
	296	VCC_USIM voltages.
	297
156f2528 KP	298	config REGULATOR_MAX8998
156f2528 KP	299	tristate "Maxim 8998 voltage regulator"
69f71008	300	depends on MFD_MAX8998
156f2528 KP	301	help
	302	This driver controls a Maxim 8998 voltage output regulator
	303	via I2C bus. The provided regulator is suitable for S3C6410
	304	and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
	305
133d4016 JL	306	config REGULATOR_MAX77686
	307	tristate "Maxim 77686 regulator"
	308	depends on MFD_MAX77686
	309	help
	310	This driver controls a Maxim 77686 regulator
	311	via I2C bus. The provided regulator is suitable for
	312	Exynos-4 chips to control VARM and VINT voltages.
	313
80b022e2 JL	314	config REGULATOR_MAX77693
	315	tristate "Maxim MAX77693 regulator"
	316	depends on MFD_MAX77693
	317	help
	318	This driver controls a Maxim 77693 regulator via I2C bus.
	319	The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
	320	and one current regulator 'CHARGER'. This is suitable for
	321	Exynos-4x12 chips.
	322
82b736df MB	323	config REGULATOR_MC13XXX_CORE
82b736df MB	324	tristate
5ec271e7	325
82b736df MB	326	config REGULATOR_MC13783
	327	tristate "Freescale MC13783 regulator driver"
	328	depends on MFD_MC13783
	329	select REGULATOR_MC13XXX_CORE
0cbdf7bc	330	help
82b736df MB	331	Say y here to support the regulators found on the Freescale MC13783
82b736df MB	332	PMIC.
0cbdf7bc	333
82b736df MB	334	config REGULATOR_MC13892
	335	tristate "Freescale MC13892 regulator driver"
	336	depends on MFD_MC13XXX
	337	select REGULATOR_MC13XXX_CORE
5976f095	338	help
82b736df MB	339	Say y here to support the regulators found on the Freescale MC13892
82b736df MB	340	PMIC.
5976f095	341
82b736df MB	342	config REGULATOR_PALMAS
	343	tristate "TI Palmas PMIC Regulators"
	344	depends on MFD_PALMAS
af8b5fc3	345	help
82b736df MB	346	If you wish to control the regulators on the Palmas series of
	347	chips say Y here. This will enable support for all the software
	348	controllable SMPS/LDO regulators.
af8b5fc3	349
82b736df MB	350	The regulators available on Palmas series chips vary depending
	351	on the muxing. This is handled automatically in the driver by
	352	reading the mux info from OTP.
b59320cc	353
82b736df MB	354	config REGULATOR_PCAP
	355	tristate "Motorola PCAP2 regulator driver"
	356	depends on EZX_PCAP
ade7515f	357	help
82b736df MB	358	This driver provides support for the voltage regulators of the
82b736df MB	359	PCAP2 PMIC.
ade7515f	360
dfb9b8a4 AL	361	config REGULATOR_PCF50633
dfb9b8a4 AL	362	tristate "NXP PCF50633 regulator driver"
c6d678b6	363	depends on MFD_PCF50633
295c08bc	364	help
dfb9b8a4 AL	365	Say Y here to support the voltage regulators and convertors
dfb9b8a4 AL	366	on PCF50633
295c08bc	367
6ffc3270 LD	368	config REGULATOR_RC5T583
	369	tristate "RICOH RC5T583 Power regulators"
	370	depends on MFD_RC5T583
	371	help
	372	Select this option to enable the power regulator of RICOH
	373	PMIC RC5T583.
	374	This driver supports the control of different power rails of device
	375	through regulator interface. The device supports multiple DCDC/LDO
	376	outputs which can be controlled by i2c communication.
	377
cb74685e SK	378	config REGULATOR_S2MPS11
	379	tristate "Samsung S2MPS11 voltage regulator"
	380	depends on MFD_SEC_CORE
	381	help
	382	This driver supports a Samsung S2MPS11 voltage output regulator
	383	via I2C bus. S2MPS11 is comprised of high efficient Buck converters
	384	including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
	385
dfb9b8a4 AL	386	config REGULATOR_S5M8767
dfb9b8a4 AL	387	tristate "Samsung S5M8767A voltage regulator"
66c9fbb9	388	depends on MFD_SEC_CORE
5e428d5c	389	help
dfb9b8a4 AL	390	This driver supports a Samsung S5M8767A voltage output regulator
	391	via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
	392	supports DVS mode with 8bits of output voltage control.
5e428d5c	393
82b736df MB	394	config REGULATOR_TI_ABB
	395	bool "TI Adaptive Body Bias on-chip LDO"
	396	depends on ARCH_OMAP
4c5dabce	397	help
82b736df MB	398	Select this option to support Texas Instruments' on-chip Adaptive Body
	399	Bias (ABB) LDO regulators. It is recommended that this option be
	400	enabled on required TI SoC. Certain Operating Performance Points
	401	on TI SoCs may be unstable without enabling this as it provides
	402	device specific optimized bias to allow/optimize functionality.
4c5dabce	403
0c570674 LD	404	config REGULATOR_TPS51632
	405	tristate "TI TPS51632 Power Regulator"
	406	depends on I2C
	407	select REGMAP_I2C
	408	help
	409	This driver supports TPS51632 voltage regulator chip.
7bde7672	410	The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
0c570674 LD	411	with Serial VID control and DVFS.
	412	The voltage output can be configure through I2C interface or PWM
	413	interface.
	414
2edd3b69 LW	415	config REGULATOR_TPS6105X
	416	tristate "TI TPS6105X Power regulators"
	417	depends on TPS6105X
	418	default y if TPS6105X
	419	help
	420	This driver supports TPS61050/TPS61052 voltage regulator chips.
	421	It is a single boost converter primarily for white LEDs and
	422	audio amplifiers.
	423
dfb9b8a4	424	config REGULATOR_TPS62360
d1cf4f65	425	tristate "TI TPS6236x Power Regulator"
dfb9b8a4 AL	426	depends on I2C
	427	select REGMAP_I2C
	428	help
d1cf4f65	429	This driver supports TPS6236x voltage regulator chip. This
dfb9b8a4 AL	430	regulator is meant for processor core supply. This chip is
	431	high-frequency synchronous step down dc-dc converter optimized
	432	for battery-powered portable applications.
	433
2de79850 AA	434	config REGULATOR_TPS65023
	435	tristate "TI TPS65023 Power regulators"
	436	depends on I2C
90923351	437	select REGMAP_I2C
2de79850 AA	438	help
	439	This driver supports TPS65023 voltage regulator chips. TPS65023 provides
	440	three step-down converters and two general-purpose LDO voltage regulators.
	441	It supports TI's software based Class-2 SmartReflex implementation.
	442
	443	config REGULATOR_TPS6507X
	444	tristate "TI TPS6507X Power regulators"
	445	depends on I2C
	446	help
	447	This driver supports TPS6507X voltage regulator chips. TPS6507X provides
	448	three step-down converters and two general-purpose LDO voltage regulators.
	449	It supports TI's software based Class-2 SmartReflex implementation.
	450
452534e5 VB	451	config REGULATOR_TPS65090
	452	tristate "TI TPS65090 Power regulator"
	453	depends on MFD_TPS65090
	454	help
	455	This driver provides support for the voltage regulators on the
	456	TI TPS65090 PMIC.
	457
a493077f AC	458	config REGULATOR_TPS65217
	459	tristate "TI TPS65217 Power regulators"
	460	depends on MFD_TPS65217
9260ad98	461	help
a493077f AC	462	This driver supports TPS65217 voltage regulator chips. TPS65217
	463	provides three step-down converters and four general-purpose LDO
	464	voltage regulators. It supports software based voltage control
	465	for different voltage domains
9260ad98	466
1394fd28 CC	467	config REGULATOR_TPS6524X
	468	tristate "TI TPS6524X Power regulators"
	469	depends on SPI
be0e2d3e	470	help
1394fd28 CC	471	This driver supports TPS6524X voltage regulator chips. TPS6524X
	472	provides three step-down converters and two general-purpose LDO
	473	voltage regulators. This device is interfaced using a customized
	474	serial interface currently supported on the sequencer serial
	475	port controller.
be0e2d3e	476
dfb9b8a4 AL	477	config REGULATOR_TPS6586X
	478	tristate "TI TPS6586X Power regulators"
	479	depends on MFD_TPS6586X
51bd6943	480	help
dfb9b8a4	481	This driver supports TPS6586X voltage regulator chips.
51bd6943	482
518fb721	483	config REGULATOR_TPS65910
ae0e6544	484	tristate "TI TPS65910/TPS65911 Power Regulators"
518fb721	485	depends on MFD_TPS65910
8b385d9b	486	help
ae0e6544	487	This driver supports TPS65910/TPS65911 voltage regulator chips.
c789ca20	488
dfb9b8a4 AL	489	config REGULATOR_TPS65912
	490	tristate "TI TPS65912 Power regulator"
	491	depends on (MFD_TPS65912_I2C \|\| MFD_TPS65912_SPI)
c789ca20	492	help
dfb9b8a4	493	This driver supports TPS65912 voltage regulator chip.
c789ca20	494
1a0bb679 LD	495	config REGULATOR_TPS80031
	496	tristate "TI TPS80031/TPS80032 power regualtor driver"
	497	depends on MFD_TPS80031
	498	help
	499	TPS80031/ TPS80032 Fully Integrated Power Management with Power
	500	Path and Battery Charger. It has 5 configurable step-down
	501	converters, 11 general purpose LDOs, VBUS generator and digital
	502	output to control regulators.
	503
dfb9b8a4 AL	504	config REGULATOR_TWL4030
	505	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
	506	depends on TWL4030_CORE
1032fbfd	507	help
dfb9b8a4 AL	508	This driver supports the voltage regulators provided by
dfb9b8a4 AL	509	this family of companion chips.
1032fbfd	510
31e54086 PM	511	config REGULATOR_VEXPRESS
	512	tristate "Versatile Express regulators"
	513	depends on VEXPRESS_CONFIG
	514	help
	515	This driver provides support for voltage regulators available
	516	on the ARM Ltd's Versatile Express platform.
	517
dfb9b8a4 AL	518	config REGULATOR_WM831X
	519	tristate "Wolfson Microelectronics WM831x PMIC regulators"
	520	depends on MFD_WM831X
49610235	521	help
dfb9b8a4 AL	522	Support the voltage and current regulators of the WM831x series
dfb9b8a4 AL	523	of PMIC devices.
49610235	524
dfb9b8a4 AL	525	config REGULATOR_WM8350
	526	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
	527	depends on MFD_WM8350
1394fd28	528	help
dfb9b8a4	529	This driver provides support for the voltage and current regulators
c6d678b6	530	of the WM8350 AudioPlus PMIC.
1394fd28	531
dfb9b8a4 AL	532	config REGULATOR_WM8400
	533	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
	534	depends on MFD_WM8400
518fb721	535	help
dfb9b8a4 AL	536	This driver provides support for the voltage regulators of the
dfb9b8a4 AL	537	WM8400 AudioPlus PMIC.
518fb721	538
dfb9b8a4 AL	539	config REGULATOR_WM8994
	540	tristate "Wolfson Microelectronics WM8994 CODEC"
	541	depends on MFD_WM8994
f7eb6c5e	542	help
dfb9b8a4 AL	543	This driver provides support for the voltage regulators on the
dfb9b8a4 AL	544	WM8994 CODEC.
f7eb6c5e	545
bbda14df	546	endif
295c08bc	547