projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
libfs: use generic_file_llseek for simple_attr
[deliverable/linux.git] / drivers / sbus / char / envctrl.c
CommitLineData
6b8c90f2 1/* envctrl.c: Temperature and Fan monitoring on Machines providing it.
1da177e4
LT		 2 *
3 * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
4 * Copyright (C) 2000 Vinh Truong (vinh.truong@eng.sun.com)
5 * VT - The implementation is to support Sun Microelectronics (SME) platform
6 * environment monitoring. SME platforms use pcf8584 as the i2c bus
7 * controller to access pcf8591 (8-bit A/D and D/A converter) and
8 * pcf8571 (256 x 8-bit static low-voltage RAM with I2C-bus interface).
9 * At board level, it follows SME Firmware I2C Specification. Reference:
10 * http://www-eu2.semiconductors.com/pip/PCF8584P
11 * http://www-eu2.semiconductors.com/pip/PCF8574AP
12 * http://www-eu2.semiconductors.com/pip/PCF8591P
13 *
14 * EB - Added support for CP1500 Global Address and PS/Voltage monitoring.
15 * Eric Brower <ebrower@usa.net>
16 *
17 * DB - Audit every copy_to_user in envctrl_read.
18 * Daniele Bellucci <bellucda@tiscali.it>
19 */
20
1da177e4 21#include <linux/module.h>
1baaf0b4 22#include <linux/init.h>
218b29e0 23#include <linux/kthread.h>
1da177e4
LT		 24#include <linux/delay.h>
25#include <linux/ioport.h>
1da177e4 26#include <linux/miscdevice.h>
872ec648 27#include <linux/kmod.h>
10a0a8d4 28#include <linux/reboot.h>
5a0e3ad6 29#include <linux/slab.h>
6b8c90f2
DM		 30#include <linux/of.h>
31#include <linux/of_device.h>
1da177e4 32
1da177e4
LT		 33#include <asm/uaccess.h>
34#include <asm/envctrl.h>
e1a39fbb 35#include <asm/io.h>
1da177e4 36
6b8c90f2
DM		 37#define DRIVER_NAME "envctrl"
38#define PFX DRIVER_NAME ": "
39
1da177e4
LT		 40#define ENVCTRL_MINOR 162
41
42#define PCF8584_ADDRESS 0x55
43
44#define CONTROL_PIN 0x80
45#define CONTROL_ES0 0x40
46#define CONTROL_ES1 0x20
47#define CONTROL_ES2 0x10
48#define CONTROL_ENI 0x08
49#define CONTROL_STA 0x04
50#define CONTROL_STO 0x02
51#define CONTROL_ACK 0x01
52
53#define STATUS_PIN 0x80
54#define STATUS_STS 0x20
55#define STATUS_BER 0x10
56#define STATUS_LRB 0x08
57#define STATUS_AD0 0x08
58#define STATUS_AAB 0x04
59#define STATUS_LAB 0x02
60#define STATUS_BB 0x01
61
62/*
63 * CLK Mode Register.
64 */
65#define BUS_CLK_90 0x00
66#define BUS_CLK_45 0x01
67#define BUS_CLK_11 0x02
68#define BUS_CLK_1_5 0x03
69
70#define CLK_3 0x00
71#define CLK_4_43 0x10
72#define CLK_6 0x14
73#define CLK_8 0x18
74#define CLK_12 0x1c
75
76#define OBD_SEND_START 0xc5 /* value to generate I2c_bus START condition */
77#define OBD_SEND_STOP 0xc3 /* value to generate I2c_bus STOP condition */
78
79/* Monitor type of i2c child device.
80 * Firmware definitions.
81 */
82#define PCF8584_MAX_CHANNELS 8
83#define PCF8584_GLOBALADDR_TYPE 6 /* global address monitor */
84#define PCF8584_FANSTAT_TYPE 3 /* fan status monitor */
85#define PCF8584_VOLTAGE_TYPE 2 /* voltage monitor */
86#define PCF8584_TEMP_TYPE 1 /* temperature monitor*/
87
88/* Monitor type of i2c child device.
89 * Driver definitions.
90 */
91#define ENVCTRL_NOMON 0
92#define ENVCTRL_CPUTEMP_MON 1 /* cpu temperature monitor */
93#define ENVCTRL_CPUVOLTAGE_MON 2 /* voltage monitor */
94#define ENVCTRL_FANSTAT_MON 3 /* fan status monitor */
af901ca1 95#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperature */
1da177e4
LT		 96 /* monitor */
97#define ENVCTRL_VOLTAGESTAT_MON 5 /* voltage status monitor */
98#define ENVCTRL_MTHRBDTEMP_MON 6 /* motherboard temperature */
af901ca1 99#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperature */
1da177e4
LT		 100#define ENVCTRL_GLOBALADDR_MON 8 /* global address */
101
102/* Child device type.
103 * Driver definitions.
104 */
105#define I2C_ADC 0 /* pcf8591 */
106#define I2C_GPIO 1 /* pcf8571 */
107
108/* Data read from child device may need to decode
109 * through a data table and a scale.
110 * Translation type as defined by firmware.
111 */
112#define ENVCTRL_TRANSLATE_NO 0
113#define ENVCTRL_TRANSLATE_PARTIAL 1
114#define ENVCTRL_TRANSLATE_COMBINED 2
115#define ENVCTRL_TRANSLATE_FULL 3 /* table[data] */
116#define ENVCTRL_TRANSLATE_SCALE 4 /* table[data]/scale */
117
118/* Driver miscellaneous definitions. */
119#define ENVCTRL_MAX_CPU 4
120#define CHANNEL_DESC_SZ 256
121
122/* Mask values for combined GlobalAddress/PowerStatus node */
123#define ENVCTRL_GLOBALADDR_ADDR_MASK 0x1F
124#define ENVCTRL_GLOBALADDR_PSTAT_MASK 0x60
125
126/* Node 0x70 ignored on CompactPCI CP1400/1500 platforms
127 * (see envctrl_init_i2c_child)
128 */
129#define ENVCTRL_CPCI_IGNORED_NODE 0x70
130
131#define PCF8584_DATA 0x00
132#define PCF8584_CSR 0x01
133
134/* Each child device can be monitored by up to PCF8584_MAX_CHANNELS.
135 * Property of a port or channel as defined by the firmware.
136 */
137struct pcf8584_channel {
138 unsigned char chnl_no;
139 unsigned char io_direction;
140 unsigned char type;
141 unsigned char last;
142};
143
144/* Each child device may have one or more tables of bytes to help decode
145 * data. Table property as defined by the firmware.
146 */
147struct pcf8584_tblprop {
148 unsigned int type;
149 unsigned int scale;
150 unsigned int offset; /* offset from the beginning of the table */
151 unsigned int size;
152};
153
154/* i2c child */
155struct i2c_child_t {
156 /* Either ADC or GPIO. */
157 unsigned char i2ctype;
158 unsigned long addr;
159 struct pcf8584_channel chnl_array[PCF8584_MAX_CHANNELS];
160
161 /* Channel info. */
162 unsigned int total_chnls; /* Number of monitor channels. */
163 unsigned char fan_mask; /* Byte mask for fan status channels. */
164 unsigned char voltage_mask; /* Byte mask for voltage status channels. */
165 struct pcf8584_tblprop tblprop_array[PCF8584_MAX_CHANNELS];
166
167 /* Properties of all monitor channels. */
168 unsigned int total_tbls; /* Number of monitor tables. */
169 char *tables; /* Pointer to table(s). */
170 char chnls_desc[CHANNEL_DESC_SZ]; /* Channel description. */
171 char mon_type[PCF8584_MAX_CHANNELS];
172};
173
174static void __iomem *i2c;
175static struct i2c_child_t i2c_childlist[ENVCTRL_MAX_CPU*2];
176static unsigned char chnls_mask[] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 };
177static unsigned int warning_temperature = 0;
178static unsigned int shutdown_temperature = 0;
179static char read_cpu;
180
181/* Forward declarations. */
182static struct i2c_child_t *envctrl_get_i2c_child(unsigned char);
183
184/* Function Description: Test the PIN bit (Pending Interrupt Not)
185 * to test when serial transmission is completed .
186 * Return : None.
187 */
188static void envtrl_i2c_test_pin(void)
189{
190 int limit = 1000000;
191
192 while (--limit > 0) {
193 if (!(readb(i2c + PCF8584_CSR) & STATUS_PIN))
194 break;
195 udelay(1);
196 }
197
198 if (limit <= 0)
6b8c90f2 199 printk(KERN_INFO PFX "Pin status will not clear.\n");
1da177e4
LT		 200}
201
202/* Function Description: Test busy bit.
203 * Return : None.
204 */
205static void envctrl_i2c_test_bb(void)
206{
207 int limit = 1000000;
208
209 while (--limit > 0) {
210 /* Busy bit 0 means busy. */
211 if (readb(i2c + PCF8584_CSR) & STATUS_BB)
212 break;
213 udelay(1);
214 }
215
216 if (limit <= 0)
6b8c90f2 217 printk(KERN_INFO PFX "Busy bit will not clear.\n");
1da177e4
LT		 218}
219
220/* Function Description: Send the address for a read access.
221 * Return : 0 if not acknowledged, otherwise acknowledged.
222 */
223static int envctrl_i2c_read_addr(unsigned char addr)
224{
225 envctrl_i2c_test_bb();
226
227 /* Load address. */
228 writeb(addr + 1, i2c + PCF8584_DATA);
229
230 envctrl_i2c_test_bb();
231
232 writeb(OBD_SEND_START, i2c + PCF8584_CSR);
233
234 /* Wait for PIN. */
235 envtrl_i2c_test_pin();
236
237 /* CSR 0 means acknowledged. */
238 if (!(readb(i2c + PCF8584_CSR) & STATUS_LRB)) {
239 return readb(i2c + PCF8584_DATA);
240 } else {
241 writeb(OBD_SEND_STOP, i2c + PCF8584_CSR);
242 return 0;
243 }
244}
245
246/* Function Description: Send the address for write mode.
247 * Return : None.
248 */
249static void envctrl_i2c_write_addr(unsigned char addr)
250{
251 envctrl_i2c_test_bb();
252 writeb(addr, i2c + PCF8584_DATA);
253
254 /* Generate Start condition. */
255 writeb(OBD_SEND_START, i2c + PCF8584_CSR);
256}
257
258/* Function Description: Read 1 byte of data from addr
259 * set by envctrl_i2c_read_addr()
260 * Return : Data from address set by envctrl_i2c_read_addr().
261 */
262static unsigned char envctrl_i2c_read_data(void)
263{
264 envtrl_i2c_test_pin();
265 writeb(CONTROL_ES0, i2c + PCF8584_CSR); /* Send neg ack. */
266 return readb(i2c + PCF8584_DATA);
267}
268
269/* Function Description: Instruct the device which port to read data from.
270 * Return : None.
271 */
272static void envctrl_i2c_write_data(unsigned char port)
273{
274 envtrl_i2c_test_pin();
275 writeb(port, i2c + PCF8584_DATA);
276}
277
278/* Function Description: Generate Stop condition after last byte is sent.
279 * Return : None.
280 */
281static void envctrl_i2c_stop(void)
282{
283 envtrl_i2c_test_pin();
284 writeb(OBD_SEND_STOP, i2c + PCF8584_CSR);
285}
286
287/* Function Description: Read adc device.
288 * Return : Data at address and port.
289 */
290static unsigned char envctrl_i2c_read_8591(unsigned char addr, unsigned char port)
291{
292 /* Send address. */
293 envctrl_i2c_write_addr(addr);
294
295 /* Setup port to read. */
296 envctrl_i2c_write_data(port);
297 envctrl_i2c_stop();
298
299 /* Read port. */
300 envctrl_i2c_read_addr(addr);
301
302 /* Do a single byte read and send stop. */
303 envctrl_i2c_read_data();
304 envctrl_i2c_stop();
305
306 return readb(i2c + PCF8584_DATA);
307}
308
309/* Function Description: Read gpio device.
310 * Return : Data at address.
311 */
312static unsigned char envctrl_i2c_read_8574(unsigned char addr)
313{
314 unsigned char rd;
315
316 envctrl_i2c_read_addr(addr);
317
318 /* Do a single byte read and send stop. */
319 rd = envctrl_i2c_read_data();
320 envctrl_i2c_stop();
321 return rd;
322}
323
324/* Function Description: Decode data read from an adc device using firmware
325 * table.
326 * Return: Number of read bytes. Data is stored in bufdata in ascii format.
327 */
328static int envctrl_i2c_data_translate(unsigned char data, int translate_type,
329 int scale, char *tbl, char *bufdata)
330{
331 int len = 0;
332
333 switch (translate_type) {
334 case ENVCTRL_TRANSLATE_NO:
335 /* No decode necessary. */
336 len = 1;
337 bufdata[0] = data;
338 break;
339
340 case ENVCTRL_TRANSLATE_FULL:
341 /* Decode this way: data = table[data]. */
342 len = 1;
343 bufdata[0] = tbl[data];
344 break;
345
346 case ENVCTRL_TRANSLATE_SCALE:
347 /* Decode this way: data = table[data]/scale */
348 sprintf(bufdata,"%d ", (tbl[data] * 10) / (scale));
349 len = strlen(bufdata);
350 bufdata[len - 1] = bufdata[len - 2];
351 bufdata[len - 2] = '.';
352 break;
353
354 default:
355 break;
356 };
357
358 return len;
359}
360
361/* Function Description: Read cpu-related data such as cpu temperature, voltage.
362 * Return: Number of read bytes. Data is stored in bufdata in ascii format.
363 */
364static int envctrl_read_cpu_info(int cpu, struct i2c_child_t *pchild,
365 char mon_type, unsigned char *bufdata)
366{
367 unsigned char data;
368 int i;
369 char *tbl, j = -1;
370
371 /* Find the right monitor type and channel. */
372 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) {
373 if (pchild->mon_type[i] == mon_type) {
374 if (++j == cpu) {
375 break;
376 }
377 }
378 }
379
380 if (j != cpu)
381 return 0;
382
383 /* Read data from address and port. */
384 data = envctrl_i2c_read_8591((unsigned char)pchild->addr,
385 (unsigned char)pchild->chnl_array[i].chnl_no);
386
387 /* Find decoding table. */
388 tbl = pchild->tables + pchild->tblprop_array[i].offset;
389
390 return envctrl_i2c_data_translate(data, pchild->tblprop_array[i].type,
391 pchild->tblprop_array[i].scale,
392 tbl, bufdata);
393}
394
395/* Function Description: Read noncpu-related data such as motherboard
396 * temperature.
397 * Return: Number of read bytes. Data is stored in bufdata in ascii format.
398 */
399static int envctrl_read_noncpu_info(struct i2c_child_t *pchild,
400 char mon_type, unsigned char *bufdata)
401{
402 unsigned char data;
403 int i;
404 char *tbl = NULL;
405
406 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) {
407 if (pchild->mon_type[i] == mon_type)
408 break;
409 }
410
411 if (i >= PCF8584_MAX_CHANNELS)
412 return 0;
413
414 /* Read data from address and port. */
415 data = envctrl_i2c_read_8591((unsigned char)pchild->addr,
416 (unsigned char)pchild->chnl_array[i].chnl_no);
417
418 /* Find decoding table. */
419 tbl = pchild->tables + pchild->tblprop_array[i].offset;
420
421 return envctrl_i2c_data_translate(data, pchild->tblprop_array[i].type,
422 pchild->tblprop_array[i].scale,
423 tbl, bufdata);
424}
425
426/* Function Description: Read fan status.
427 * Return : Always 1 byte. Status stored in bufdata.
428 */
429static int envctrl_i2c_fan_status(struct i2c_child_t *pchild,
430 unsigned char data,
431 char *bufdata)
432{
433 unsigned char tmp, ret = 0;
434 int i, j = 0;
435
436 tmp = data & pchild->fan_mask;
437
438 if (tmp == pchild->fan_mask) {
439 /* All bits are on. All fans are functioning. */
440 ret = ENVCTRL_ALL_FANS_GOOD;
441 } else if (tmp == 0) {
442 /* No bits are on. No fans are functioning. */
443 ret = ENVCTRL_ALL_FANS_BAD;
444 } else {
445 /* Go through all channels, mark 'on' the matched bits.
446 * Notice that fan_mask may have discontiguous bits but
447 * return mask are always contiguous. For example if we
448 * monitor 4 fans at channels 0,1,2,4, the return mask
449 * should be 00010000 if only fan at channel 4 is working.
450 */
451 for (i = 0; i < PCF8584_MAX_CHANNELS;i++) {
452 if (pchild->fan_mask & chnls_mask[i]) {
453 if (!(chnls_mask[i] & tmp))
454 ret |= chnls_mask[j];
455
456 j++;
457 }
458 }
459 }
460
461 bufdata[0] = ret;
462 return 1;
463}
464
465/* Function Description: Read global addressing line.
466 * Return : Always 1 byte. Status stored in bufdata.
467 */
468static int envctrl_i2c_globaladdr(struct i2c_child_t *pchild,
469 unsigned char data,
470 char *bufdata)
471{
472 /* Translatation table is not necessary, as global
473 * addr is the integer value of the GA# bits.
474 *
475 * NOTE: MSB is documented as zero, but I see it as '1' always....
476 *
477 * -----------------------------------------------
478 * | 0 | FAL | DEG | GA4 | GA3 | GA2 | GA1 | GA0 |
479 * -----------------------------------------------
480 * GA0 - GA4 integer value of Global Address (backplane slot#)
481 * DEG 0 = cPCI Power supply output is starting to degrade
482 * 1 = cPCI Power supply output is OK
483 * FAL 0 = cPCI Power supply has failed
484 * 1 = cPCI Power supply output is OK
485 */
486 bufdata[0] = (data & ENVCTRL_GLOBALADDR_ADDR_MASK);
487 return 1;
488}
489
490/* Function Description: Read standard voltage and power supply status.
491 * Return : Always 1 byte. Status stored in bufdata.
492 */
493static unsigned char envctrl_i2c_voltage_status(struct i2c_child_t *pchild,
494 unsigned char data,
495 char *bufdata)
496{
497 unsigned char tmp, ret = 0;
498 int i, j = 0;
499
500 tmp = data & pchild->voltage_mask;
501
502 /* Two channels are used to monitor voltage and power supply. */
503 if (tmp == pchild->voltage_mask) {
504 /* All bits are on. Voltage and power supply are okay. */
505 ret = ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD;
506 } else if (tmp == 0) {
507 /* All bits are off. Voltage and power supply are bad */
508 ret = ENVCTRL_VOLTAGE_POWERSUPPLY_BAD;
509 } else {
510 /* Either voltage or power supply has problem. */
511 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) {
512 if (pchild->voltage_mask & chnls_mask[i]) {
513 j++;
514
515 /* Break out when there is a mismatch. */
516 if (!(chnls_mask[i] & tmp))
517 break;
518 }
519 }
520
521 /* Make a wish that hardware will always use the
522 * first channel for voltage and the second for
523 * power supply.
524 */
525 if (j == 1)
526 ret = ENVCTRL_VOLTAGE_BAD;
527 else
528 ret = ENVCTRL_POWERSUPPLY_BAD;
529 }
530
531 bufdata[0] = ret;
532 return 1;
533}
534
535/* Function Description: Read a byte from /dev/envctrl. Mapped to user read().
536 * Return: Number of read bytes. 0 for error.
537 */
538static ssize_t
539envctrl_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
540{
541 struct i2c_child_t *pchild;
542 unsigned char data[10];
543 int ret = 0;
544
545 /* Get the type of read as decided in ioctl() call.
546 * Find the appropriate i2c child.
547 * Get the data and put back to the user buffer.
548 */
549
550 switch ((int)(long)file->private_data) {
551 case ENVCTRL_RD_WARNING_TEMPERATURE:
552 if (warning_temperature == 0)
553 return 0;
554
555 data[0] = (unsigned char)(warning_temperature);
556 ret = 1;
557 if (copy_to_user(buf, data, ret))
558 ret = -EFAULT;
559 break;
560
561 case ENVCTRL_RD_SHUTDOWN_TEMPERATURE:
562 if (shutdown_temperature == 0)
563 return 0;
564
565 data[0] = (unsigned char)(shutdown_temperature);
566 ret = 1;
567 if (copy_to_user(buf, data, ret))
568 ret = -EFAULT;
569 break;
570
571 case ENVCTRL_RD_MTHRBD_TEMPERATURE:
572 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_MTHRBDTEMP_MON)))
573 return 0;
574 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_MTHRBDTEMP_MON, data);
575 if (copy_to_user(buf, data, ret))
576 ret = -EFAULT;
577 break;
578
579 case ENVCTRL_RD_CPU_TEMPERATURE:
580 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON)))
581 return 0;
582 ret = envctrl_read_cpu_info(read_cpu, pchild, ENVCTRL_CPUTEMP_MON, data);
583
584 /* Reset cpu to the default cpu0. */
585 if (copy_to_user(buf, data, ret))
586 ret = -EFAULT;
587 break;
588
589 case ENVCTRL_RD_CPU_VOLTAGE:
590 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_CPUVOLTAGE_MON)))
591 return 0;
592 ret = envctrl_read_cpu_info(read_cpu, pchild, ENVCTRL_CPUVOLTAGE_MON, data);
593
594 /* Reset cpu to the default cpu0. */
595 if (copy_to_user(buf, data, ret))
596 ret = -EFAULT;
597 break;
598
599 case ENVCTRL_RD_SCSI_TEMPERATURE:
600 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_SCSITEMP_MON)))
601 return 0;
602 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_SCSITEMP_MON, data);
603 if (copy_to_user(buf, data, ret))
604 ret = -EFAULT;
605 break;
606
607 case ENVCTRL_RD_ETHERNET_TEMPERATURE:
608 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_ETHERTEMP_MON)))
609 return 0;
610 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_ETHERTEMP_MON, data);
611 if (copy_to_user(buf, data, ret))
612 ret = -EFAULT;
613 break;
614
615 case ENVCTRL_RD_FAN_STATUS:
616 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_FANSTAT_MON)))
617 return 0;
618 data[0] = envctrl_i2c_read_8574(pchild->addr);
619 ret = envctrl_i2c_fan_status(pchild,data[0], data);
620 if (copy_to_user(buf, data, ret))
621 ret = -EFAULT;
622 break;
623
624 case ENVCTRL_RD_GLOBALADDRESS:
625 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_GLOBALADDR_MON)))
626 return 0;
627 data[0] = envctrl_i2c_read_8574(pchild->addr);
628 ret = envctrl_i2c_globaladdr(pchild, data[0], data);
629 if (copy_to_user(buf, data, ret))
630 ret = -EFAULT;
631 break;
632
633 case ENVCTRL_RD_VOLTAGE_STATUS:
634 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_VOLTAGESTAT_MON)))
635 /* If voltage monitor not present, check for CPCI equivalent */
636 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_GLOBALADDR_MON)))
637 return 0;
638 data[0] = envctrl_i2c_read_8574(pchild->addr);
639 ret = envctrl_i2c_voltage_status(pchild, data[0], data);
640 if (copy_to_user(buf, data, ret))
641 ret = -EFAULT;
642 break;
643
644 default:
645 break;
646
647 };
648
649 return ret;
650}
651
652/* Function Description: Command what to read. Mapped to user ioctl().
653 * Return: Gives 0 for implemented commands, -EINVAL otherwise.
654 */
1928f8e5
CH		 655static long
656envctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
1da177e4
LT		 657{
658 char __user *infobuf;
659
660 switch (cmd) {
661 case ENVCTRL_RD_WARNING_TEMPERATURE:
662 case ENVCTRL_RD_SHUTDOWN_TEMPERATURE:
663 case ENVCTRL_RD_MTHRBD_TEMPERATURE:
664 case ENVCTRL_RD_FAN_STATUS:
665 case ENVCTRL_RD_VOLTAGE_STATUS:
666 case ENVCTRL_RD_ETHERNET_TEMPERATURE:
667 case ENVCTRL_RD_SCSI_TEMPERATURE:
668 case ENVCTRL_RD_GLOBALADDRESS:
669 file->private_data = (void *)(long)cmd;
670 break;
671
672 case ENVCTRL_RD_CPU_TEMPERATURE:
673 case ENVCTRL_RD_CPU_VOLTAGE:
674 /* Check to see if application passes in any cpu number,
675 * the default is cpu0.
676 */
677 infobuf = (char __user *) arg;
678 if (infobuf == NULL) {
679 read_cpu = 0;
680 }else {
681 get_user(read_cpu, infobuf);
682 }
683
684 /* Save the command for use when reading. */
685 file->private_data = (void *)(long)cmd;
686 break;
687
688 default:
689 return -EINVAL;
690 };
691
692 return 0;
693}
694
695/* Function Description: open device. Mapped to user open().
696 * Return: Always 0.
697 */
698static int
699envctrl_open(struct inode *inode, struct file *file)
700{
701 file->private_data = NULL;
702 return 0;
703}
704
705/* Function Description: Open device. Mapped to user close().
706 * Return: Always 0.
707 */
708static int
709envctrl_release(struct inode *inode, struct file *file)
710{
711 return 0;
712}
713
00977a59 714static const struct file_operations envctrl_fops = {
1928f8e5
CH		 715 .owner = THIS_MODULE,
716 .read = envctrl_read,
717 .unlocked_ioctl = envctrl_ioctl,
718#ifdef CONFIG_COMPAT
719 .compat_ioctl = envctrl_ioctl,
720#endif
721 .open = envctrl_open,
722 .release = envctrl_release,
1da177e4
LT		 723};
724
725static struct miscdevice envctrl_dev = {
726 ENVCTRL_MINOR,
727 "envctrl",
728 &envctrl_fops
729};
730
731/* Function Description: Set monitor type based on firmware description.
732 * Return: None.
733 */
734static void envctrl_set_mon(struct i2c_child_t *pchild,
ccf0dec6 735 const char *chnl_desc,
1da177e4
LT		 736 int chnl_no)
737{
738 /* Firmware only has temperature type. It does not distinguish
739 * different kinds of temperatures. We use channel description
740 * to disinguish them.
741 */
742 if (!(strcmp(chnl_desc,"temp,cpu")) ||
743 !(strcmp(chnl_desc,"temp,cpu0")) ||
744 !(strcmp(chnl_desc,"temp,cpu1")) ||
745 !(strcmp(chnl_desc,"temp,cpu2")) ||
746 !(strcmp(chnl_desc,"temp,cpu3")))
747 pchild->mon_type[chnl_no] = ENVCTRL_CPUTEMP_MON;
748
749 if (!(strcmp(chnl_desc,"vddcore,cpu0")) ||
750 !(strcmp(chnl_desc,"vddcore,cpu1")) ||
751 !(strcmp(chnl_desc,"vddcore,cpu2")) ||
752 !(strcmp(chnl_desc,"vddcore,cpu3")))
753 pchild->mon_type[chnl_no] = ENVCTRL_CPUVOLTAGE_MON;
754
755 if (!(strcmp(chnl_desc,"temp,motherboard")))
756 pchild->mon_type[chnl_no] = ENVCTRL_MTHRBDTEMP_MON;
757
758 if (!(strcmp(chnl_desc,"temp,scsi")))
759 pchild->mon_type[chnl_no] = ENVCTRL_SCSITEMP_MON;
760
761 if (!(strcmp(chnl_desc,"temp,ethernet")))
762 pchild->mon_type[chnl_no] = ENVCTRL_ETHERTEMP_MON;
763}
764
765/* Function Description: Initialize monitor channel with channel desc,
766 * decoding tables, monitor type, optional properties.
767 * Return: None.
768 */
690c8fd3 769static void envctrl_init_adc(struct i2c_child_t *pchild, struct device_node *dp)
1da177e4 770{
1da177e4 771 int i = 0, len;
ccf0dec6
SR		 772 const char *pos;
773 const unsigned int *pval;
1da177e4
LT		 774
775 /* Firmware describe channels into a stream separated by a '\0'. */
690c8fd3 776 pos = of_get_property(dp, "channels-description", &len);
1da177e4
LT		 777
778 while (len > 0) {
779 int l = strlen(pos) + 1;
780 envctrl_set_mon(pchild, pos, i++);
781 len -= l;
782 pos += l;
783 }
784
785 /* Get optional properties. */
690c8fd3
DM		 786 pval = of_get_property(dp, "warning-temp", NULL);
787 if (pval)
788 warning_temperature = *pval;
789
790 pval = of_get_property(dp, "shutdown-temp", NULL);
791 if (pval)
792 shutdown_temperature = *pval;
1da177e4
LT		 793}
794
795/* Function Description: Initialize child device monitoring fan status.
796 * Return: None.
797 */
798static void envctrl_init_fanstat(struct i2c_child_t *pchild)
799{
800 int i;
801
802 /* Go through all channels and set up the mask. */
803 for (i = 0; i < pchild->total_chnls; i++)
804 pchild->fan_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no];
805
806 /* We only need to know if this child has fan status monitored.
807 * We don't care which channels since we have the mask already.
808 */
809 pchild->mon_type[0] = ENVCTRL_FANSTAT_MON;
810}
811
812/* Function Description: Initialize child device for global addressing line.
813 * Return: None.
814 */
815static void envctrl_init_globaladdr(struct i2c_child_t *pchild)
816{
817 int i;
818
819 /* Voltage/PowerSupply monitoring is piggybacked
820 * with Global Address on CompactPCI. See comments
821 * within envctrl_i2c_globaladdr for bit assignments.
822 *
823 * The mask is created here by assigning mask bits to each
824 * bit position that represents PCF8584_VOLTAGE_TYPE data.
825 * Channel numbers are not consecutive within the globaladdr
826 * node (why?), so we use the actual counter value as chnls_mask
827 * index instead of the chnl_array[x].chnl_no value.
828 *
829 * NOTE: This loop could be replaced with a constant representing
830 * a mask of bits 5&6 (ENVCTRL_GLOBALADDR_PSTAT_MASK).
831 */
832 for (i = 0; i < pchild->total_chnls; i++) {
833 if (PCF8584_VOLTAGE_TYPE == pchild->chnl_array[i].type) {
834 pchild->voltage_mask |= chnls_mask[i];
835 }
836 }
837
838 /* We only need to know if this child has global addressing
839 * line monitored. We don't care which channels since we know
840 * the mask already (ENVCTRL_GLOBALADDR_ADDR_MASK).
841 */
842 pchild->mon_type[0] = ENVCTRL_GLOBALADDR_MON;
843}
844
845/* Initialize child device monitoring voltage status. */
846static void envctrl_init_voltage_status(struct i2c_child_t *pchild)
847{
848 int i;
849
850 /* Go through all channels and set up the mask. */
851 for (i = 0; i < pchild->total_chnls; i++)
852 pchild->voltage_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no];
853
854 /* We only need to know if this child has voltage status monitored.
855 * We don't care which channels since we have the mask already.
856 */
857 pchild->mon_type[0] = ENVCTRL_VOLTAGESTAT_MON;
858}
859
860/* Function Description: Initialize i2c child device.
861 * Return: None.
862 */
6b8c90f2 863static void envctrl_init_i2c_child(struct device_node *dp,
1da177e4
LT		 864 struct i2c_child_t *pchild)
865{
690c8fd3 866 int len, i, tbls_size = 0;
ccf0dec6 867 const void *pval;
1da177e4
LT		 868
869 /* Get device address. */
690c8fd3
DM		 870 pval = of_get_property(dp, "reg", &len);
871 memcpy(&pchild->addr, pval, len);
1da177e4
LT		 872
873 /* Get tables property. Read firmware temperature tables. */
690c8fd3
DM		 874 pval = of_get_property(dp, "translation", &len);
875 if (pval && len > 0) {
876 memcpy(pchild->tblprop_array, pval, len);
1da177e4
LT		 877 pchild->total_tbls = len / sizeof(struct pcf8584_tblprop);
878 for (i = 0; i < pchild->total_tbls; i++) {
879 if ((pchild->tblprop_array[i].size + pchild->tblprop_array[i].offset) > tbls_size) {
880 tbls_size = pchild->tblprop_array[i].size + pchild->tblprop_array[i].offset;
881 }
882 }
883
884 pchild->tables = kmalloc(tbls_size, GFP_KERNEL);
885 if (pchild->tables == NULL){
6b8c90f2 886 printk(KERN_ERR PFX "Failed to allocate table.\n");
1da177e4
LT		 887 return;
888 }
690c8fd3
DM		 889 pval = of_get_property(dp, "tables", &len);
890 if (!pval || len <= 0) {
6b8c90f2 891 printk(KERN_ERR PFX "Failed to get table.\n");
1da177e4
LT		 892 return;
893 }
690c8fd3 894 memcpy(pchild->tables, pval, len);
1da177e4
LT		 895 }
896
897 /* SPARCengine ASM Reference Manual (ref. SMI doc 805-7581-04)
898 * sections 2.5, 3.5, 4.5 state node 0x70 for CP1400/1500 is
899 * "For Factory Use Only."
900 *
901 * We ignore the node on these platforms by assigning the
902 * 'NULL' monitor type.
903 */
904 if (ENVCTRL_CPCI_IGNORED_NODE == pchild->addr) {
690c8fd3 905 struct device_node *root_node;
1da177e4 906 int len;
1da177e4 907
690c8fd3
DM		 908 root_node = of_find_node_by_path("/");
909 if (!strcmp(root_node->name, "SUNW,UltraSPARC-IIi-cEngine")) {
1da177e4
LT		 910 for (len = 0; len < PCF8584_MAX_CHANNELS; ++len) {
911 pchild->mon_type[len] = ENVCTRL_NOMON;
912 }
913 return;
914 }
915 }
916
917 /* Get the monitor channels. */
690c8fd3
DM		 918 pval = of_get_property(dp, "channels-in-use", &len);
919 memcpy(pchild->chnl_array, pval, len);
1da177e4
LT		 920 pchild->total_chnls = len / sizeof(struct pcf8584_channel);
921
922 for (i = 0; i < pchild->total_chnls; i++) {
923 switch (pchild->chnl_array[i].type) {
924 case PCF8584_TEMP_TYPE:
690c8fd3 925 envctrl_init_adc(pchild, dp);
1da177e4
LT		 926 break;
927
928 case PCF8584_GLOBALADDR_TYPE:
929 envctrl_init_globaladdr(pchild);
930 i = pchild->total_chnls;
931 break;
932
933 case PCF8584_FANSTAT_TYPE:
934 envctrl_init_fanstat(pchild);
935 i = pchild->total_chnls;
936 break;
937
938 case PCF8584_VOLTAGE_TYPE:
939 if (pchild->i2ctype == I2C_ADC) {
690c8fd3 940 envctrl_init_adc(pchild,dp);
1da177e4
LT		 941 } else {
942 envctrl_init_voltage_status(pchild);
943 }
944 i = pchild->total_chnls;
945 break;
946
947 default:
948 break;
949 };
950 }
951}
952
953/* Function Description: Search the child device list for a device.
954 * Return : The i2c child if found. NULL otherwise.
955 */
956static struct i2c_child_t *envctrl_get_i2c_child(unsigned char mon_type)
957{
958 int i, j;
959
960 for (i = 0; i < ENVCTRL_MAX_CPU*2; i++) {
961 for (j = 0; j < PCF8584_MAX_CHANNELS; j++) {
962 if (i2c_childlist[i].mon_type[j] == mon_type) {
963 return (struct i2c_child_t *)(&(i2c_childlist[i]));
964 }
965 }
966 }
967 return NULL;
968}
969
970static void envctrl_do_shutdown(void)
971{
972 static int inprog = 0;
3db03b4a 973 int ret;
1da177e4
LT		 974
975 if (inprog != 0)
976 return;
977
978 inprog = 1;
979 printk(KERN_CRIT "kenvctrld: WARNING: Shutting down the system now.\n");
10a0a8d4 980 ret = orderly_poweroff(true);
3db03b4a 981 if (ret < 0) {
1da177e4
LT		 982 printk(KERN_CRIT "kenvctrld: WARNING: system shutdown failed!\n");
983 inprog = 0; /* unlikely to succeed, but we could try again */
984 }
985}
986
987static struct task_struct *kenvctrld_task;
988
989static int kenvctrld(void *__unused)
990{
991 int poll_interval;
992 int whichcpu;
993 char tempbuf[10];
994 struct i2c_child_t *cputemp;
995
996 if (NULL == (cputemp = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON))) {
6b8c90f2
DM		 997 printk(KERN_ERR PFX
998 "kenvctrld unable to monitor CPU temp-- exiting\n");
1da177e4
LT		 999 return -ENODEV;
1000 }
1001
cb39d263 1002 poll_interval = 5000; /* TODO env_mon_interval */
1da177e4 1003
6b8c90f2 1004 printk(KERN_INFO PFX "%s starting...\n", current->comm);
1da177e4 1005 for (;;) {
218b29e0 1006 msleep_interruptible(poll_interval);
1da177e4 1007
218b29e0
CH		 1008 if (kthread_should_stop())
1009 break;
1010
1da177e4
LT		 1011 for (whichcpu = 0; whichcpu < ENVCTRL_MAX_CPU; ++whichcpu) {
1012 if (0 < envctrl_read_cpu_info(whichcpu, cputemp,
1013 ENVCTRL_CPUTEMP_MON,
1014 tempbuf)) {
1015 if (tempbuf[0] >= shutdown_temperature) {
1016 printk(KERN_CRIT
1017 "%s: WARNING: CPU%i temperature %i C meets or exceeds "\
1018 "shutdown threshold %i C\n",
1019 current->comm, whichcpu,
1020 tempbuf[0], shutdown_temperature);
1021 envctrl_do_shutdown();
1022 }
1023 }
1024 }
1025 }
6b8c90f2 1026 printk(KERN_INFO PFX "%s exiting...\n", current->comm);
1da177e4
LT		 1027 return 0;
1028}
1029
2dc11581 1030static int __devinit envctrl_probe(struct platform_device *op,
6b8c90f2 1031 const struct of_device_id *match)
1da177e4 1032{
6b8c90f2
DM		 1033 struct device_node *dp;
1034 int index, err;
1da177e4 1035
6b8c90f2
DM		 1036 if (i2c)
1037 return -EINVAL;
1038
1039 i2c = of_ioremap(&op->resource[0], 0, 0x2, DRIVER_NAME);
1040 if (!i2c)
1041 return -ENOMEM;
1042
1043 index = 0;
61c7a080 1044 dp = op->dev.of_node->child;
6b8c90f2
DM		 1045 while (dp) {
1046 if (!strcmp(dp->name, "gpio")) {
1047 i2c_childlist[index].i2ctype = I2C_GPIO;
1048 envctrl_init_i2c_child(dp, &(i2c_childlist[index++]));
1049 } else if (!strcmp(dp->name, "adc")) {
1050 i2c_childlist[index].i2ctype = I2C_ADC;
1051 envctrl_init_i2c_child(dp, &(i2c_childlist[index++]));
1da177e4 1052 }
1da177e4 1053
6b8c90f2 1054 dp = dp->sibling;
1da177e4
LT		 1055 }
1056
1057 /* Set device address. */
1058 writeb(CONTROL_PIN, i2c + PCF8584_CSR);
1059 writeb(PCF8584_ADDRESS, i2c + PCF8584_DATA);
1060
1061 /* Set system clock and SCL frequencies. */
1062 writeb(CONTROL_PIN | CONTROL_ES1, i2c + PCF8584_CSR);
1063 writeb(CLK_4_43 | BUS_CLK_90, i2c + PCF8584_DATA);
1064
1065 /* Enable serial interface. */
1066 writeb(CONTROL_PIN | CONTROL_ES0 | CONTROL_ACK, i2c + PCF8584_CSR);
1067 udelay(200);
1068
1069 /* Register the device as a minor miscellaneous device. */
1070 err = misc_register(&envctrl_dev);
1071 if (err) {
6b8c90f2 1072 printk(KERN_ERR PFX "Unable to get misc minor %d\n",
1da177e4
LT		 1073 envctrl_dev.minor);
1074 goto out_iounmap;
1075 }
1076
1077 /* Note above traversal routine post-incremented 'i' to accommodate
1078 * a next child device, so we decrement before reverse-traversal of
1079 * child devices.
1080 */
6b8c90f2
DM		 1081 printk(KERN_INFO PFX "Initialized ");
1082 for (--index; index >= 0; --index) {
1da177e4 1083 printk("[%s 0x%lx]%s",
6b8c90f2
DM		 1084 (I2C_ADC == i2c_childlist[index].i2ctype) ? "adc" :
1085 ((I2C_GPIO == i2c_childlist[index].i2ctype) ? "gpio" : "unknown"),
1086 i2c_childlist[index].addr, (0 == index) ? "\n" : " ");
1da177e4
LT		 1087 }
1088
218b29e0
CH		 1089 kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
1090 if (IS_ERR(kenvctrld_task)) {
38c1844b 1091 err = PTR_ERR(kenvctrld_task);
1da177e4 1092 goto out_deregister;
218b29e0 1093 }
1da177e4
LT		 1094
1095 return 0;
1096
1097out_deregister:
1098 misc_deregister(&envctrl_dev);
1099out_iounmap:
6b8c90f2
DM		 1100 of_iounmap(&op->resource[0], i2c, 0x2);
1101 for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++)
1102 kfree(i2c_childlist[index].tables);
6044ec88 1103
1da177e4 1104 return err;
1da177e4
LT		 1105}
1106
2dc11581 1107static int __devexit envctrl_remove(struct platform_device *op)
1da177e4 1108{
6b8c90f2 1109 int index;
1da177e4 1110
218b29e0 1111 kthread_stop(kenvctrld_task);
1da177e4 1112
6b8c90f2 1113 of_iounmap(&op->resource[0], i2c, 0x2);
1da177e4
LT		 1114 misc_deregister(&envctrl_dev);
1115
6b8c90f2
DM		 1116 for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++)
1117 kfree(i2c_childlist[index].tables);
1118
1119 return 0;
1120}
1121
fd098316 1122static const struct of_device_id envctrl_match[] = {
6b8c90f2
DM		 1123 {
1124 .name = "i2c",
1125 .compatible = "i2cpcf,8584",
1126 },
1127 {},
1128};
1129MODULE_DEVICE_TABLE(of, envctrl_match);
1130
1131static struct of_platform_driver envctrl_driver = {
4018294b
GL		 1132 .driver = {
1133 .name = DRIVER_NAME,
1134 .owner = THIS_MODULE,
1135 .of_match_table = envctrl_match,
1136 },
6b8c90f2
DM		 1137 .probe = envctrl_probe,
1138 .remove = __devexit_p(envctrl_remove),
1139};
1140
1141static int __init envctrl_init(void)
1142{
1ab1d63a 1143 return of_register_platform_driver(&envctrl_driver);
6b8c90f2
DM		 1144}
1145
1146static void __exit envctrl_exit(void)
1147{
1ab1d63a 1148 of_unregister_platform_driver(&envctrl_driver);
1da177e4
LT		 1149}
1150
1151module_init(envctrl_init);
6b8c90f2 1152module_exit(envctrl_exit);
1da177e4 1153MODULE_LICENSE("GPL");
Linux kernel - Deliverables
This page took 0.594195 seconds and 5 git commands to generate.