Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * NCR 5380 generic driver routines. These should make it *trivial* | |
3 | * to implement 5380 SCSI drivers under Linux with a non-trantor | |
4 | * architecture. | |
5 | * | |
6 | * Note that these routines also work with NR53c400 family chips. | |
7 | * | |
8 | * Copyright 1993, Drew Eckhardt | |
9 | * Visionary Computing | |
10 | * (Unix and Linux consulting and custom programming) | |
11 | * drew@colorado.edu | |
12 | * +1 (303) 666-5836 | |
13 | * | |
1da177e4 LT |
14 | * For more information, please consult |
15 | * | |
16 | * NCR 5380 Family | |
17 | * SCSI Protocol Controller | |
18 | * Databook | |
19 | * | |
20 | * NCR Microelectronics | |
21 | * 1635 Aeroplaza Drive | |
22 | * Colorado Springs, CO 80916 | |
23 | * 1+ (719) 578-3400 | |
24 | * 1+ (800) 334-5454 | |
25 | */ | |
26 | ||
27 | /* | |
1da177e4 | 28 | * Revision 1.10 1998/9/2 Alan Cox |
fa195afe | 29 | * (alan@lxorguk.ukuu.org.uk) |
1da177e4 LT |
30 | * Fixed up the timer lockups reported so far. Things still suck. Looking |
31 | * forward to 2.3 and per device request queues. Then it'll be possible to | |
32 | * SMP thread this beast and improve life no end. | |
33 | ||
34 | * Revision 1.9 1997/7/27 Ronald van Cuijlenborg | |
35 | * (ronald.van.cuijlenborg@tip.nl or nutty@dds.nl) | |
36 | * (hopefully) fixed and enhanced USLEEP | |
37 | * added support for DTC3181E card (for Mustek scanner) | |
38 | * | |
39 | ||
40 | * Revision 1.8 Ingmar Baumgart | |
41 | * (ingmar@gonzo.schwaben.de) | |
42 | * added support for NCR53C400a card | |
43 | * | |
44 | ||
45 | * Revision 1.7 1996/3/2 Ray Van Tassle (rayvt@comm.mot.com) | |
46 | * added proc_info | |
47 | * added support needed for DTC 3180/3280 | |
48 | * fixed a couple of bugs | |
49 | * | |
50 | ||
51 | * Revision 1.5 1994/01/19 09:14:57 drew | |
52 | * Fixed udelay() hack that was being used on DATAOUT phases | |
53 | * instead of a proper wait for the final handshake. | |
54 | * | |
55 | * Revision 1.4 1994/01/19 06:44:25 drew | |
56 | * *** empty log message *** | |
57 | * | |
58 | * Revision 1.3 1994/01/19 05:24:40 drew | |
59 | * Added support for TCR LAST_BYTE_SENT bit. | |
60 | * | |
61 | * Revision 1.2 1994/01/15 06:14:11 drew | |
62 | * REAL DMA support, bug fixes. | |
63 | * | |
64 | * Revision 1.1 1994/01/15 06:00:54 drew | |
65 | * Initial revision | |
66 | * | |
67 | */ | |
68 | ||
69 | /* | |
70 | * Further development / testing that should be done : | |
71 | * 1. Cleanup the NCR5380_transfer_dma function and DMA operation complete | |
72 | * code so that everything does the same thing that's done at the | |
73 | * end of a pseudo-DMA read operation. | |
74 | * | |
75 | * 2. Fix REAL_DMA (interrupt driven, polled works fine) - | |
76 | * basically, transfer size needs to be reduced by one | |
77 | * and the last byte read as is done with PSEUDO_DMA. | |
78 | * | |
79 | * 4. Test SCSI-II tagged queueing (I have no devices which support | |
80 | * tagged queueing) | |
1da177e4 | 81 | */ |
db9dff36 | 82 | #include <scsi/scsi_dbg.h> |
1abfd370 | 83 | #include <scsi/scsi_transport_spi.h> |
1da177e4 LT |
84 | |
85 | #if (NDEBUG & NDEBUG_LISTS) | |
86 | #define LIST(x,y) {printk("LINE:%d Adding %p to %p\n", __LINE__, (void*)(x), (void*)(y)); if ((x)==(y)) udelay(5); } | |
87 | #define REMOVE(w,x,y,z) {printk("LINE:%d Removing: %p->%p %p->%p \n", __LINE__, (void*)(w), (void*)(x), (void*)(y), (void*)(z)); if ((x)==(y)) udelay(5); } | |
88 | #else | |
89 | #define LIST(x,y) | |
90 | #define REMOVE(w,x,y,z) | |
91 | #endif | |
92 | ||
93 | #ifndef notyet | |
1da177e4 LT |
94 | #undef REAL_DMA |
95 | #endif | |
96 | ||
97 | #ifdef REAL_DMA_POLL | |
98 | #undef READ_OVERRUNS | |
99 | #define READ_OVERRUNS | |
100 | #endif | |
101 | ||
102 | #ifdef BOARD_REQUIRES_NO_DELAY | |
103 | #define io_recovery_delay(x) | |
104 | #else | |
105 | #define io_recovery_delay(x) udelay(x) | |
106 | #endif | |
107 | ||
108 | /* | |
109 | * Design | |
110 | * | |
111 | * This is a generic 5380 driver. To use it on a different platform, | |
112 | * one simply writes appropriate system specific macros (ie, data | |
113 | * transfer - some PC's will use the I/O bus, 68K's must use | |
114 | * memory mapped) and drops this file in their 'C' wrapper. | |
115 | * | |
116 | * (Note from hch: unfortunately it was not enough for the different | |
117 | * m68k folks and instead of improving this driver they copied it | |
118 | * and hacked it up for their needs. As a consequence they lost | |
119 | * most updates to this driver. Maybe someone will fix all these | |
120 | * drivers to use a common core one day..) | |
121 | * | |
122 | * As far as command queueing, two queues are maintained for | |
123 | * each 5380 in the system - commands that haven't been issued yet, | |
124 | * and commands that are currently executing. This means that an | |
125 | * unlimited number of commands may be queued, letting | |
126 | * more commands propagate from the higher driver levels giving higher | |
127 | * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported, | |
128 | * allowing multiple commands to propagate all the way to a SCSI-II device | |
129 | * while a command is already executing. | |
130 | * | |
131 | * | |
132 | * Issues specific to the NCR5380 : | |
133 | * | |
134 | * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead | |
135 | * piece of hardware that requires you to sit in a loop polling for | |
136 | * the REQ signal as long as you are connected. Some devices are | |
137 | * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect | |
686f3990 | 138 | * while doing long seek operations. [...] These |
1da177e4 LT |
139 | * broken devices are the exception rather than the rule and I'd rather |
140 | * spend my time optimizing for the normal case. | |
141 | * | |
142 | * Architecture : | |
143 | * | |
144 | * At the heart of the design is a coroutine, NCR5380_main, | |
145 | * which is started from a workqueue for each NCR5380 host in the | |
146 | * system. It attempts to establish I_T_L or I_T_L_Q nexuses by | |
147 | * removing the commands from the issue queue and calling | |
148 | * NCR5380_select() if a nexus is not established. | |
149 | * | |
150 | * Once a nexus is established, the NCR5380_information_transfer() | |
151 | * phase goes through the various phases as instructed by the target. | |
152 | * if the target goes into MSG IN and sends a DISCONNECT message, | |
153 | * the command structure is placed into the per instance disconnected | |
154 | * queue, and NCR5380_main tries to find more work. If the target is | |
155 | * idle for too long, the system will try to sleep. | |
156 | * | |
157 | * If a command has disconnected, eventually an interrupt will trigger, | |
158 | * calling NCR5380_intr() which will in turn call NCR5380_reselect | |
159 | * to reestablish a nexus. This will run main if necessary. | |
160 | * | |
161 | * On command termination, the done function will be called as | |
162 | * appropriate. | |
163 | * | |
164 | * SCSI pointers are maintained in the SCp field of SCSI command | |
165 | * structures, being initialized after the command is connected | |
166 | * in NCR5380_select, and set as appropriate in NCR5380_information_transfer. | |
167 | * Note that in violation of the standard, an implicit SAVE POINTERS operation | |
168 | * is done, since some BROKEN disks fail to issue an explicit SAVE POINTERS. | |
169 | */ | |
170 | ||
171 | /* | |
172 | * Using this file : | |
173 | * This file a skeleton Linux SCSI driver for the NCR 5380 series | |
174 | * of chips. To use it, you write an architecture specific functions | |
175 | * and macros and include this file in your driver. | |
176 | * | |
177 | * These macros control options : | |
178 | * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be | |
179 | * defined. | |
180 | * | |
181 | * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically | |
182 | * for commands that return with a CHECK CONDITION status. | |
183 | * | |
184 | * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential | |
185 | * transceivers. | |
186 | * | |
187 | * DONT_USE_INTR - if defined, never use interrupts, even if we probe or | |
188 | * override-configure an IRQ. | |
189 | * | |
1da177e4 LT |
190 | * PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases. |
191 | * | |
192 | * REAL_DMA - if defined, REAL DMA is used during the data transfer phases. | |
193 | * | |
194 | * REAL_DMA_POLL - if defined, REAL DMA is used but the driver doesn't | |
195 | * rely on phase mismatch and EOP interrupts to determine end | |
196 | * of phase. | |
197 | * | |
198 | * UNSAFE - leave interrupts enabled during pseudo-DMA transfers. You | |
199 | * only really want to use this if you're having a problem with | |
200 | * dropped characters during high speed communications, and even | |
201 | * then, you're going to be better off twiddling with transfersize | |
202 | * in the high level code. | |
203 | * | |
204 | * Defaults for these will be provided although the user may want to adjust | |
205 | * these to allocate CPU resources to the SCSI driver or "real" code. | |
206 | * | |
1da177e4 | 207 | * These macros MUST be defined : |
1da177e4 LT |
208 | * |
209 | * NCR5380_read(register) - read from the specified register | |
210 | * | |
211 | * NCR5380_write(register, value) - write to the specific register | |
212 | * | |
213 | * NCR5380_implementation_fields - additional fields needed for this | |
214 | * specific implementation of the NCR5380 | |
215 | * | |
216 | * Either real DMA *or* pseudo DMA may be implemented | |
217 | * REAL functions : | |
218 | * NCR5380_REAL_DMA should be defined if real DMA is to be used. | |
219 | * Note that the DMA setup functions should return the number of bytes | |
220 | * that they were able to program the controller for. | |
221 | * | |
222 | * Also note that generic i386/PC versions of these macros are | |
223 | * available as NCR5380_i386_dma_write_setup, | |
224 | * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. | |
225 | * | |
226 | * NCR5380_dma_write_setup(instance, src, count) - initialize | |
227 | * NCR5380_dma_read_setup(instance, dst, count) - initialize | |
228 | * NCR5380_dma_residual(instance); - residual count | |
229 | * | |
230 | * PSEUDO functions : | |
231 | * NCR5380_pwrite(instance, src, count) | |
232 | * NCR5380_pread(instance, dst, count); | |
233 | * | |
234 | * The generic driver is initialized by calling NCR5380_init(instance), | |
235 | * after setting the appropriate host specific fields and ID. If the | |
236 | * driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance, | |
237 | * possible) function may be used. | |
238 | */ | |
239 | ||
54d8fe44 FT |
240 | static int do_abort(struct Scsi_Host *); |
241 | static void do_reset(struct Scsi_Host *); | |
1da177e4 LT |
242 | |
243 | /* | |
244 | * initialize_SCp - init the scsi pointer field | |
245 | * @cmd: command block to set up | |
246 | * | |
247 | * Set up the internal fields in the SCSI command. | |
248 | */ | |
249 | ||
710ddd0d | 250 | static inline void initialize_SCp(struct scsi_cmnd *cmd) |
1da177e4 LT |
251 | { |
252 | /* | |
253 | * Initialize the Scsi Pointer field so that all of the commands in the | |
254 | * various queues are valid. | |
255 | */ | |
256 | ||
9e0fe44d BH |
257 | if (scsi_bufflen(cmd)) { |
258 | cmd->SCp.buffer = scsi_sglist(cmd); | |
259 | cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1; | |
45711f1a | 260 | cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); |
1da177e4 LT |
261 | cmd->SCp.this_residual = cmd->SCp.buffer->length; |
262 | } else { | |
263 | cmd->SCp.buffer = NULL; | |
264 | cmd->SCp.buffers_residual = 0; | |
9e0fe44d BH |
265 | cmd->SCp.ptr = NULL; |
266 | cmd->SCp.this_residual = 0; | |
1da177e4 LT |
267 | } |
268 | } | |
269 | ||
270 | /** | |
2f854b82 FT |
271 | * NCR5380_poll_politely - wait for chip register value |
272 | * @instance: controller to poll | |
273 | * @reg: 5380 register to poll | |
274 | * @bit: Bitmask to check | |
275 | * @val: Value required to exit | |
276 | * @wait: Time-out in jiffies | |
277 | * | |
278 | * Polls the chip in a reasonably efficient manner waiting for an | |
279 | * event to occur. After a short quick poll we begin to yield the CPU | |
280 | * (if possible). In irq contexts the time-out is arbitrarily limited. | |
281 | * Callers may hold locks as long as they are held in irq mode. | |
282 | * | |
283 | * Returns 0 if event occurred otherwise -ETIMEDOUT. | |
1da177e4 | 284 | */ |
2f854b82 FT |
285 | |
286 | static int NCR5380_poll_politely(struct Scsi_Host *instance, | |
287 | int reg, int bit, int val, int wait) | |
1da177e4 | 288 | { |
2f854b82 FT |
289 | struct NCR5380_hostdata *hostdata = shost_priv(instance); |
290 | unsigned long deadline = jiffies + wait; | |
291 | unsigned long n; | |
292 | ||
293 | /* Busy-wait for up to 10 ms */ | |
294 | n = min(10000U, jiffies_to_usecs(wait)); | |
295 | n *= hostdata->accesses_per_ms; | |
296 | n /= 1000; | |
297 | do { | |
298 | if ((NCR5380_read(reg) & bit) == val) | |
1da177e4 LT |
299 | return 0; |
300 | cpu_relax(); | |
2f854b82 FT |
301 | } while (n--); |
302 | ||
303 | if (irqs_disabled() || in_interrupt()) | |
304 | return -ETIMEDOUT; | |
305 | ||
306 | /* Repeatedly sleep for 1 ms until deadline */ | |
307 | while (time_is_after_jiffies(deadline)) { | |
308 | schedule_timeout_uninterruptible(1); | |
309 | if ((NCR5380_read(reg) & bit) == val) | |
1da177e4 | 310 | return 0; |
1da177e4 | 311 | } |
2f854b82 | 312 | |
1da177e4 LT |
313 | return -ETIMEDOUT; |
314 | } | |
315 | ||
316 | static struct { | |
317 | unsigned char value; | |
318 | const char *name; | |
702809ce | 319 | } phases[] __maybe_unused = { |
1da177e4 LT |
320 | {PHASE_DATAOUT, "DATAOUT"}, |
321 | {PHASE_DATAIN, "DATAIN"}, | |
322 | {PHASE_CMDOUT, "CMDOUT"}, | |
323 | {PHASE_STATIN, "STATIN"}, | |
324 | {PHASE_MSGOUT, "MSGOUT"}, | |
325 | {PHASE_MSGIN, "MSGIN"}, | |
326 | {PHASE_UNKNOWN, "UNKNOWN"} | |
327 | }; | |
328 | ||
185a7a1c | 329 | #if NDEBUG |
1da177e4 LT |
330 | static struct { |
331 | unsigned char mask; | |
332 | const char *name; | |
333 | } signals[] = { | |
334 | {SR_DBP, "PARITY"}, | |
335 | {SR_RST, "RST"}, | |
336 | {SR_BSY, "BSY"}, | |
337 | {SR_REQ, "REQ"}, | |
338 | {SR_MSG, "MSG"}, | |
339 | {SR_CD, "CD"}, | |
340 | {SR_IO, "IO"}, | |
341 | {SR_SEL, "SEL"}, | |
342 | {0, NULL} | |
343 | }, | |
344 | basrs[] = { | |
345 | {BASR_ATN, "ATN"}, | |
346 | {BASR_ACK, "ACK"}, | |
347 | {0, NULL} | |
348 | }, | |
349 | icrs[] = { | |
350 | {ICR_ASSERT_RST, "ASSERT RST"}, | |
351 | {ICR_ASSERT_ACK, "ASSERT ACK"}, | |
352 | {ICR_ASSERT_BSY, "ASSERT BSY"}, | |
353 | {ICR_ASSERT_SEL, "ASSERT SEL"}, | |
354 | {ICR_ASSERT_ATN, "ASSERT ATN"}, | |
355 | {ICR_ASSERT_DATA, "ASSERT DATA"}, | |
356 | {0, NULL} | |
357 | }, | |
358 | mrs[] = { | |
359 | {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, | |
360 | {MR_TARGET, "MODE TARGET"}, | |
361 | {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, | |
362 | {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"}, | |
363 | {MR_MONITOR_BSY, "MODE MONITOR BSY"}, | |
364 | {MR_DMA_MODE, "MODE DMA"}, | |
365 | {MR_ARBITRATE, "MODE ARBITRATION"}, | |
366 | {0, NULL} | |
367 | }; | |
368 | ||
369 | /** | |
370 | * NCR5380_print - print scsi bus signals | |
371 | * @instance: adapter state to dump | |
372 | * | |
373 | * Print the SCSI bus signals for debugging purposes | |
374 | * | |
375 | * Locks: caller holds hostdata lock (not essential) | |
376 | */ | |
377 | ||
378 | static void NCR5380_print(struct Scsi_Host *instance) | |
379 | { | |
1da177e4 | 380 | unsigned char status, data, basr, mr, icr, i; |
1da177e4 LT |
381 | |
382 | data = NCR5380_read(CURRENT_SCSI_DATA_REG); | |
383 | status = NCR5380_read(STATUS_REG); | |
384 | mr = NCR5380_read(MODE_REG); | |
385 | icr = NCR5380_read(INITIATOR_COMMAND_REG); | |
386 | basr = NCR5380_read(BUS_AND_STATUS_REG); | |
387 | ||
388 | printk("STATUS_REG: %02x ", status); | |
389 | for (i = 0; signals[i].mask; ++i) | |
390 | if (status & signals[i].mask) | |
391 | printk(",%s", signals[i].name); | |
392 | printk("\nBASR: %02x ", basr); | |
393 | for (i = 0; basrs[i].mask; ++i) | |
394 | if (basr & basrs[i].mask) | |
395 | printk(",%s", basrs[i].name); | |
396 | printk("\nICR: %02x ", icr); | |
397 | for (i = 0; icrs[i].mask; ++i) | |
398 | if (icr & icrs[i].mask) | |
399 | printk(",%s", icrs[i].name); | |
400 | printk("\nMODE: %02x ", mr); | |
401 | for (i = 0; mrs[i].mask; ++i) | |
402 | if (mr & mrs[i].mask) | |
403 | printk(",%s", mrs[i].name); | |
404 | printk("\n"); | |
405 | } | |
406 | ||
407 | ||
408 | /* | |
409 | * NCR5380_print_phase - show SCSI phase | |
410 | * @instance: adapter to dump | |
411 | * | |
412 | * Print the current SCSI phase for debugging purposes | |
413 | * | |
414 | * Locks: none | |
415 | */ | |
416 | ||
417 | static void NCR5380_print_phase(struct Scsi_Host *instance) | |
418 | { | |
1da177e4 LT |
419 | unsigned char status; |
420 | int i; | |
1da177e4 LT |
421 | |
422 | status = NCR5380_read(STATUS_REG); | |
423 | if (!(status & SR_REQ)) | |
424 | printk("scsi%d : REQ not asserted, phase unknown.\n", instance->host_no); | |
425 | else { | |
426 | for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i); | |
427 | printk("scsi%d : phase %s\n", instance->host_no, phases[i].name); | |
428 | } | |
429 | } | |
430 | #endif | |
431 | ||
1da177e4 | 432 | |
d5f7e65d | 433 | static int probe_irq __initdata; |
1da177e4 LT |
434 | |
435 | /** | |
436 | * probe_intr - helper for IRQ autoprobe | |
437 | * @irq: interrupt number | |
438 | * @dev_id: unused | |
439 | * @regs: unused | |
440 | * | |
441 | * Set a flag to indicate the IRQ in question was received. This is | |
442 | * used by the IRQ probe code. | |
443 | */ | |
444 | ||
7d12e780 | 445 | static irqreturn_t __init probe_intr(int irq, void *dev_id) |
1da177e4 LT |
446 | { |
447 | probe_irq = irq; | |
448 | return IRQ_HANDLED; | |
449 | } | |
450 | ||
451 | /** | |
452 | * NCR5380_probe_irq - find the IRQ of an NCR5380 | |
453 | * @instance: NCR5380 controller | |
454 | * @possible: bitmask of ISA IRQ lines | |
455 | * | |
456 | * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ | |
457 | * and then looking to see what interrupt actually turned up. | |
458 | * | |
459 | * Locks: none, irqs must be enabled on entry | |
460 | */ | |
461 | ||
702809ce AM |
462 | static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance, |
463 | int possible) | |
1da177e4 | 464 | { |
1da177e4 LT |
465 | struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; |
466 | unsigned long timeout; | |
467 | int trying_irqs, i, mask; | |
1da177e4 | 468 | |
22f5f10d | 469 | for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1) |
4909cc2b | 470 | if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0)) |
1da177e4 LT |
471 | trying_irqs |= mask; |
472 | ||
4e5a800c | 473 | timeout = jiffies + msecs_to_jiffies(250); |
22f5f10d | 474 | probe_irq = NO_IRQ; |
1da177e4 LT |
475 | |
476 | /* | |
477 | * A interrupt is triggered whenever BSY = false, SEL = true | |
478 | * and a bit set in the SELECT_ENABLE_REG is asserted on the | |
479 | * SCSI bus. | |
480 | * | |
481 | * Note that the bus is only driven when the phase control signals | |
482 | * (I/O, C/D, and MSG) match those in the TCR, so we must reset that | |
483 | * to zero. | |
484 | */ | |
485 | ||
486 | NCR5380_write(TARGET_COMMAND_REG, 0); | |
487 | NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); | |
488 | NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask); | |
489 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL); | |
490 | ||
22f5f10d | 491 | while (probe_irq == NO_IRQ && time_before(jiffies, timeout)) |
a9a3047d | 492 | schedule_timeout_uninterruptible(1); |
1da177e4 LT |
493 | |
494 | NCR5380_write(SELECT_ENABLE_REG, 0); | |
495 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
496 | ||
22f5f10d | 497 | for (i = 1, mask = 2; i < 16; ++i, mask <<= 1) |
1da177e4 LT |
498 | if (trying_irqs & mask) |
499 | free_irq(i, NULL); | |
500 | ||
501 | return probe_irq; | |
502 | } | |
503 | ||
504 | /** | |
8c32513b FT |
505 | * NCR58380_info - report driver and host information |
506 | * @instance: relevant scsi host instance | |
1da177e4 | 507 | * |
8c32513b | 508 | * For use as the host template info() handler. |
1da177e4 LT |
509 | * |
510 | * Locks: none | |
511 | */ | |
512 | ||
8c32513b | 513 | static const char *NCR5380_info(struct Scsi_Host *instance) |
1da177e4 | 514 | { |
8c32513b FT |
515 | struct NCR5380_hostdata *hostdata = shost_priv(instance); |
516 | ||
517 | return hostdata->info; | |
518 | } | |
519 | ||
520 | static void prepare_info(struct Scsi_Host *instance) | |
521 | { | |
522 | struct NCR5380_hostdata *hostdata = shost_priv(instance); | |
523 | ||
524 | snprintf(hostdata->info, sizeof(hostdata->info), | |
525 | "%s, io_port 0x%lx, n_io_port %d, " | |
526 | "base 0x%lx, irq %d, " | |
527 | "can_queue %d, cmd_per_lun %d, " | |
528 | "sg_tablesize %d, this_id %d, " | |
9c3f0e2b | 529 | "flags { %s%s%s%s}, " |
8c32513b FT |
530 | "options { %s} ", |
531 | instance->hostt->name, instance->io_port, instance->n_io_port, | |
532 | instance->base, instance->irq, | |
533 | instance->can_queue, instance->cmd_per_lun, | |
534 | instance->sg_tablesize, instance->this_id, | |
535 | hostdata->flags & FLAG_NCR53C400 ? "NCR53C400 " : "", | |
536 | hostdata->flags & FLAG_DTC3181E ? "DTC3181E " : "", | |
537 | hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "", | |
9c3f0e2b | 538 | hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "", |
1da177e4 | 539 | #ifdef AUTOPROBE_IRQ |
8c32513b | 540 | "AUTOPROBE_IRQ " |
1da177e4 | 541 | #endif |
1da177e4 | 542 | #ifdef DIFFERENTIAL |
8c32513b | 543 | "DIFFERENTIAL " |
1da177e4 LT |
544 | #endif |
545 | #ifdef REAL_DMA | |
8c32513b | 546 | "REAL_DMA " |
1da177e4 LT |
547 | #endif |
548 | #ifdef REAL_DMA_POLL | |
8c32513b | 549 | "REAL_DMA_POLL " |
1da177e4 LT |
550 | #endif |
551 | #ifdef PARITY | |
8c32513b | 552 | "PARITY " |
1da177e4 LT |
553 | #endif |
554 | #ifdef PSEUDO_DMA | |
8c32513b | 555 | "PSEUDO_DMA " |
1da177e4 LT |
556 | #endif |
557 | #ifdef UNSAFE | |
8c32513b | 558 | "UNSAFE " |
8c32513b FT |
559 | #endif |
560 | ""); | |
1da177e4 LT |
561 | } |
562 | ||
563 | /** | |
564 | * NCR5380_print_status - dump controller info | |
565 | * @instance: controller to dump | |
566 | * | |
567 | * Print commands in the various queues, called from NCR5380_abort | |
568 | * and NCR5380_debug to aid debugging. | |
569 | * | |
570 | * Locks: called functions disable irqs | |
571 | */ | |
572 | ||
3be1b3ea | 573 | static void __maybe_unused NCR5380_print_status(struct Scsi_Host *instance) |
1da177e4 LT |
574 | { |
575 | NCR5380_dprint(NDEBUG_ANY, instance); | |
576 | NCR5380_dprint_phase(NDEBUG_ANY, instance); | |
577 | } | |
578 | ||
a9c2dc43 | 579 | #ifdef PSEUDO_DMA |
1da177e4 LT |
580 | /******************************************/ |
581 | /* | |
582 | * /proc/scsi/[dtc pas16 t128 generic]/[0-ASC_NUM_BOARD_SUPPORTED] | |
583 | * | |
584 | * *buffer: I/O buffer | |
585 | * **start: if inout == FALSE pointer into buffer where user read should start | |
586 | * offset: current offset | |
587 | * length: length of buffer | |
588 | * hostno: Scsi_Host host_no | |
589 | * inout: TRUE - user is writing; FALSE - user is reading | |
590 | * | |
591 | * Return the number of bytes read from or written | |
592 | */ | |
593 | ||
dd7ab71b AV |
594 | static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance, |
595 | char *buffer, int length) | |
596 | { | |
a9c2dc43 FT |
597 | struct NCR5380_hostdata *hostdata = shost_priv(instance); |
598 | ||
599 | hostdata->spin_max_r = 0; | |
600 | hostdata->spin_max_w = 0; | |
601 | return 0; | |
dd7ab71b | 602 | } |
a9c2dc43 | 603 | #endif |
dd7ab71b | 604 | |
1da177e4 | 605 | static |
710ddd0d | 606 | void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m); |
1da177e4 | 607 | static |
dd7ab71b | 608 | void lprint_command(unsigned char *cmd, struct seq_file *m); |
1da177e4 | 609 | static |
dd7ab71b | 610 | void lprint_opcode(int opcode, struct seq_file *m); |
1da177e4 | 611 | |
dd7ab71b AV |
612 | static int __maybe_unused NCR5380_show_info(struct seq_file *m, |
613 | struct Scsi_Host *instance) | |
1da177e4 | 614 | { |
1da177e4 | 615 | struct NCR5380_hostdata *hostdata; |
710ddd0d | 616 | struct scsi_cmnd *ptr; |
1da177e4 LT |
617 | |
618 | hostdata = (struct NCR5380_hostdata *) instance->hostdata; | |
619 | ||
a9c2dc43 | 620 | #ifdef PSEUDO_DMA |
0c3de38f | 621 | seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n", |
a9c2dc43 | 622 | hostdata->spin_max_w, hostdata->spin_max_r); |
1da177e4 LT |
623 | #endif |
624 | spin_lock_irq(instance->host_lock); | |
625 | if (!hostdata->connected) | |
0c3de38f | 626 | seq_printf(m, "scsi%d: no currently connected command\n", instance->host_no); |
1da177e4 | 627 | else |
710ddd0d | 628 | lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m); |
0c3de38f | 629 | seq_printf(m, "scsi%d: issue_queue\n", instance->host_no); |
710ddd0d | 630 | for (ptr = (struct scsi_cmnd *) hostdata->issue_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble) |
dd7ab71b | 631 | lprint_Scsi_Cmnd(ptr, m); |
1da177e4 | 632 | |
0c3de38f | 633 | seq_printf(m, "scsi%d: disconnected_queue\n", instance->host_no); |
710ddd0d | 634 | for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble) |
dd7ab71b | 635 | lprint_Scsi_Cmnd(ptr, m); |
1da177e4 | 636 | spin_unlock_irq(instance->host_lock); |
dd7ab71b | 637 | return 0; |
1da177e4 LT |
638 | } |
639 | ||
710ddd0d | 640 | static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m) |
1da177e4 | 641 | { |
0c3de38f | 642 | seq_printf(m, "scsi%d : destination target %d, lun %llu\n", cmd->device->host->host_no, cmd->device->id, cmd->device->lun); |
91c40f24 | 643 | seq_puts(m, " command = "); |
dd7ab71b | 644 | lprint_command(cmd->cmnd, m); |
1da177e4 LT |
645 | } |
646 | ||
dd7ab71b | 647 | static void lprint_command(unsigned char *command, struct seq_file *m) |
1da177e4 LT |
648 | { |
649 | int i, s; | |
dd7ab71b | 650 | lprint_opcode(command[0], m); |
1da177e4 | 651 | for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) |
0c3de38f | 652 | seq_printf(m, "%02x ", command[i]); |
f50332ff | 653 | seq_putc(m, '\n'); |
1da177e4 LT |
654 | } |
655 | ||
dd7ab71b | 656 | static void lprint_opcode(int opcode, struct seq_file *m) |
1da177e4 | 657 | { |
0c3de38f | 658 | seq_printf(m, "%2d (0x%02x)", opcode, opcode); |
1da177e4 LT |
659 | } |
660 | ||
661 | ||
662 | /** | |
663 | * NCR5380_init - initialise an NCR5380 | |
664 | * @instance: adapter to configure | |
665 | * @flags: control flags | |
666 | * | |
667 | * Initializes *instance and corresponding 5380 chip, | |
668 | * with flags OR'd into the initial flags value. | |
669 | * | |
670 | * Notes : I assume that the host, hostno, and id bits have been | |
671 | * set correctly. I don't care about the irq and other fields. | |
672 | * | |
673 | * Returns 0 for success | |
674 | * | |
675 | * Locks: interrupts must be enabled when we are called | |
676 | */ | |
677 | ||
6f039790 | 678 | static int NCR5380_init(struct Scsi_Host *instance, int flags) |
1da177e4 | 679 | { |
b6488f97 | 680 | int i; |
1da177e4 | 681 | struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; |
2f854b82 | 682 | unsigned long deadline; |
1da177e4 LT |
683 | |
684 | if(in_interrupt()) | |
685 | printk(KERN_ERR "NCR5380_init called with interrupts off!\n"); | |
1da177e4 | 686 | |
1da177e4 LT |
687 | hostdata->id_mask = 1 << instance->this_id; |
688 | for (i = hostdata->id_mask; i <= 0x80; i <<= 1) | |
689 | if (i > hostdata->id_mask) | |
690 | hostdata->id_higher_mask |= i; | |
691 | for (i = 0; i < 8; ++i) | |
692 | hostdata->busy[i] = 0; | |
693 | #ifdef REAL_DMA | |
694 | hostdata->dmalen = 0; | |
695 | #endif | |
1da177e4 LT |
696 | hostdata->connected = NULL; |
697 | hostdata->issue_queue = NULL; | |
698 | hostdata->disconnected_queue = NULL; | |
699 | ||
c4028958 | 700 | INIT_DELAYED_WORK(&hostdata->coroutine, NCR5380_main); |
0ad0eff9 FT |
701 | hostdata->work_q = alloc_workqueue("ncr5380_%d", |
702 | WQ_UNBOUND | WQ_MEM_RECLAIM, | |
703 | 1, instance->host_no); | |
704 | if (!hostdata->work_q) | |
705 | return -ENOMEM; | |
706 | ||
1da177e4 LT |
707 | /* The CHECK code seems to break the 53C400. Will check it later maybe */ |
708 | if (flags & FLAG_NCR53C400) | |
709 | hostdata->flags = FLAG_HAS_LAST_BYTE_SENT | flags; | |
710 | else | |
711 | hostdata->flags = FLAG_CHECK_LAST_BYTE_SENT | flags; | |
712 | ||
713 | hostdata->host = instance; | |
1da177e4 | 714 | |
8c32513b FT |
715 | prepare_info(instance); |
716 | ||
1da177e4 LT |
717 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); |
718 | NCR5380_write(MODE_REG, MR_BASE); | |
719 | NCR5380_write(TARGET_COMMAND_REG, 0); | |
720 | NCR5380_write(SELECT_ENABLE_REG, 0); | |
2f854b82 FT |
721 | |
722 | /* Calibrate register polling loop */ | |
723 | i = 0; | |
724 | deadline = jiffies + 1; | |
725 | do { | |
726 | cpu_relax(); | |
727 | } while (time_is_after_jiffies(deadline)); | |
728 | deadline += msecs_to_jiffies(256); | |
729 | do { | |
730 | NCR5380_read(STATUS_REG); | |
731 | ++i; | |
732 | cpu_relax(); | |
733 | } while (time_is_after_jiffies(deadline)); | |
734 | hostdata->accesses_per_ms = i / 256; | |
735 | ||
b6488f97 FT |
736 | return 0; |
737 | } | |
1da177e4 | 738 | |
b6488f97 FT |
739 | /** |
740 | * NCR5380_maybe_reset_bus - Detect and correct bus wedge problems. | |
741 | * @instance: adapter to check | |
742 | * | |
743 | * If the system crashed, it may have crashed with a connected target and | |
744 | * the SCSI bus busy. Check for BUS FREE phase. If not, try to abort the | |
745 | * currently established nexus, which we know nothing about. Failing that | |
746 | * do a bus reset. | |
747 | * | |
748 | * Note that a bus reset will cause the chip to assert IRQ. | |
749 | * | |
750 | * Returns 0 if successful, otherwise -ENXIO. | |
751 | */ | |
752 | ||
753 | static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance) | |
754 | { | |
9c3f0e2b | 755 | struct NCR5380_hostdata *hostdata = shost_priv(instance); |
b6488f97 | 756 | int pass; |
1da177e4 LT |
757 | |
758 | for (pass = 1; (NCR5380_read(STATUS_REG) & SR_BSY) && pass <= 6; ++pass) { | |
759 | switch (pass) { | |
760 | case 1: | |
761 | case 3: | |
762 | case 5: | |
636b1ec8 FT |
763 | shost_printk(KERN_ERR, instance, "SCSI bus busy, waiting up to five seconds\n"); |
764 | NCR5380_poll_politely(instance, | |
765 | STATUS_REG, SR_BSY, 0, 5 * HZ); | |
1da177e4 LT |
766 | break; |
767 | case 2: | |
636b1ec8 | 768 | shost_printk(KERN_ERR, instance, "bus busy, attempting abort\n"); |
1da177e4 LT |
769 | do_abort(instance); |
770 | break; | |
771 | case 4: | |
636b1ec8 | 772 | shost_printk(KERN_ERR, instance, "bus busy, attempting reset\n"); |
1da177e4 | 773 | do_reset(instance); |
9c3f0e2b FT |
774 | /* Wait after a reset; the SCSI standard calls for |
775 | * 250ms, we wait 500ms to be on the safe side. | |
776 | * But some Toshiba CD-ROMs need ten times that. | |
777 | */ | |
778 | if (hostdata->flags & FLAG_TOSHIBA_DELAY) | |
779 | msleep(2500); | |
780 | else | |
781 | msleep(500); | |
1da177e4 LT |
782 | break; |
783 | case 6: | |
636b1ec8 | 784 | shost_printk(KERN_ERR, instance, "bus locked solid\n"); |
1da177e4 LT |
785 | return -ENXIO; |
786 | } | |
787 | } | |
788 | return 0; | |
789 | } | |
790 | ||
791 | /** | |
792 | * NCR5380_exit - remove an NCR5380 | |
793 | * @instance: adapter to remove | |
794 | */ | |
795 | ||
a43cf0f3 | 796 | static void NCR5380_exit(struct Scsi_Host *instance) |
1da177e4 LT |
797 | { |
798 | struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; | |
799 | ||
a684b8da | 800 | cancel_delayed_work_sync(&hostdata->coroutine); |
0ad0eff9 | 801 | destroy_workqueue(hostdata->work_q); |
1da177e4 LT |
802 | } |
803 | ||
804 | /** | |
1bb40589 FT |
805 | * NCR5380_queue_command - queue a command |
806 | * @instance: the relevant SCSI adapter | |
807 | * @cmd: SCSI command | |
1da177e4 | 808 | * |
1bb40589 FT |
809 | * cmd is added to the per-instance issue queue, with minor |
810 | * twiddling done to the host specific fields of cmd. If the | |
811 | * main coroutine is not running, it is restarted. | |
1da177e4 LT |
812 | */ |
813 | ||
1bb40589 FT |
814 | static int NCR5380_queue_command(struct Scsi_Host *instance, |
815 | struct scsi_cmnd *cmd) | |
1da177e4 | 816 | { |
1bb40589 | 817 | struct NCR5380_hostdata *hostdata = shost_priv(instance); |
710ddd0d | 818 | struct scsi_cmnd *tmp; |
1bb40589 | 819 | unsigned long flags; |
1da177e4 LT |
820 | |
821 | #if (NDEBUG & NDEBUG_NO_WRITE) | |
822 | switch (cmd->cmnd[0]) { | |
823 | case WRITE_6: | |
824 | case WRITE_10: | |
825 | printk("scsi%d : WRITE attempted with NO_WRITE debugging flag set\n", instance->host_no); | |
826 | cmd->result = (DID_ERROR << 16); | |
1bb40589 | 827 | cmd->scsi_done(cmd); |
1da177e4 LT |
828 | return 0; |
829 | } | |
830 | #endif /* (NDEBUG & NDEBUG_NO_WRITE) */ | |
831 | ||
1da177e4 LT |
832 | /* |
833 | * We use the host_scribble field as a pointer to the next command | |
834 | * in a queue | |
835 | */ | |
836 | ||
837 | cmd->host_scribble = NULL; | |
1da177e4 LT |
838 | cmd->result = 0; |
839 | ||
1bb40589 FT |
840 | spin_lock_irqsave(instance->host_lock, flags); |
841 | ||
1da177e4 LT |
842 | /* |
843 | * Insert the cmd into the issue queue. Note that REQUEST SENSE | |
844 | * commands are added to the head of the queue since any command will | |
845 | * clear the contingent allegiance condition that exists and the | |
846 | * sense data is only guaranteed to be valid while the condition exists. | |
847 | */ | |
848 | ||
849 | if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) { | |
850 | LIST(cmd, hostdata->issue_queue); | |
851 | cmd->host_scribble = (unsigned char *) hostdata->issue_queue; | |
852 | hostdata->issue_queue = cmd; | |
853 | } else { | |
710ddd0d | 854 | for (tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp->host_scribble; tmp = (struct scsi_cmnd *) tmp->host_scribble); |
1da177e4 LT |
855 | LIST(cmd, tmp); |
856 | tmp->host_scribble = (unsigned char *) cmd; | |
857 | } | |
1bb40589 FT |
858 | spin_unlock_irqrestore(instance->host_lock, flags); |
859 | ||
52a6a1cb | 860 | dprintk(NDEBUG_QUEUES, "scsi%d : command added to %s of queue\n", instance->host_no, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail"); |
1da177e4 LT |
861 | |
862 | /* Run the coroutine if it isn't already running. */ | |
863 | /* Kick off command processing */ | |
0ad0eff9 | 864 | queue_delayed_work(hostdata->work_q, &hostdata->coroutine, 0); |
1da177e4 LT |
865 | return 0; |
866 | } | |
867 | ||
1da177e4 LT |
868 | /** |
869 | * NCR5380_main - NCR state machines | |
870 | * | |
871 | * NCR5380_main is a coroutine that runs as long as more work can | |
872 | * be done on the NCR5380 host adapters in a system. Both | |
873 | * NCR5380_queue_command() and NCR5380_intr() will try to start it | |
874 | * in case it is not running. | |
875 | * | |
876 | * Locks: called as its own thread with no locks held. Takes the | |
877 | * host lock and called routines may take the isa dma lock. | |
878 | */ | |
879 | ||
c4028958 | 880 | static void NCR5380_main(struct work_struct *work) |
1da177e4 | 881 | { |
c4028958 DH |
882 | struct NCR5380_hostdata *hostdata = |
883 | container_of(work, struct NCR5380_hostdata, coroutine.work); | |
1da177e4 | 884 | struct Scsi_Host *instance = hostdata->host; |
710ddd0d | 885 | struct scsi_cmnd *tmp, *prev; |
1da177e4 LT |
886 | int done; |
887 | ||
888 | spin_lock_irq(instance->host_lock); | |
889 | do { | |
890 | /* Lock held here */ | |
891 | done = 1; | |
ae753a33 | 892 | if (!hostdata->connected) { |
52a6a1cb | 893 | dprintk(NDEBUG_MAIN, "scsi%d : not connected\n", instance->host_no); |
1da177e4 LT |
894 | /* |
895 | * Search through the issue_queue for a command destined | |
896 | * for a target that's not busy. | |
897 | */ | |
710ddd0d | 898 | for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble) |
1da177e4 LT |
899 | { |
900 | if (prev != tmp) | |
9cb78c16 | 901 | dprintk(NDEBUG_LISTS, "MAIN tmp=%p target=%d busy=%d lun=%llu\n", tmp, tmp->device->id, hostdata->busy[tmp->device->id], tmp->device->lun); |
1da177e4 | 902 | /* When we find one, remove it from the issue queue. */ |
9cb78c16 HR |
903 | if (!(hostdata->busy[tmp->device->id] & |
904 | (1 << (u8)(tmp->device->lun & 0xff)))) { | |
1da177e4 LT |
905 | if (prev) { |
906 | REMOVE(prev, prev->host_scribble, tmp, tmp->host_scribble); | |
907 | prev->host_scribble = tmp->host_scribble; | |
908 | } else { | |
909 | REMOVE(-1, hostdata->issue_queue, tmp, tmp->host_scribble); | |
710ddd0d | 910 | hostdata->issue_queue = (struct scsi_cmnd *) tmp->host_scribble; |
1da177e4 LT |
911 | } |
912 | tmp->host_scribble = NULL; | |
913 | ||
914 | /* | |
915 | * Attempt to establish an I_T_L nexus here. | |
916 | * On success, instance->hostdata->connected is set. | |
917 | * On failure, we must add the command back to the | |
918 | * issue queue so we can keep trying. | |
919 | */ | |
9cb78c16 | 920 | dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, "scsi%d : main() : command for target %d lun %llu removed from issue_queue\n", instance->host_no, tmp->device->id, tmp->device->lun); |
1da177e4 | 921 | |
76f13b93 FT |
922 | /* |
923 | * REQUEST SENSE commands are issued without tagged | |
924 | * queueing, even on SCSI-II devices because the | |
925 | * contingent allegiance condition exists for the | |
926 | * entire unit. | |
927 | */ | |
928 | ||
929 | if (!NCR5380_select(instance, tmp)) { | |
1f1b0c74 | 930 | /* OK or bad target */ |
1da177e4 | 931 | } else { |
1f1b0c74 | 932 | /* Need to retry */ |
1da177e4 LT |
933 | LIST(tmp, hostdata->issue_queue); |
934 | tmp->host_scribble = (unsigned char *) hostdata->issue_queue; | |
935 | hostdata->issue_queue = tmp; | |
936 | done = 0; | |
52a6a1cb | 937 | dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, "scsi%d : main(): select() failed, returned to issue_queue\n", instance->host_no); |
1da177e4 | 938 | } |
ae753a33 | 939 | if (hostdata->connected) |
1f1b0c74 | 940 | break; |
1da177e4 LT |
941 | /* lock held here still */ |
942 | } /* if target/lun is not busy */ | |
943 | } /* for */ | |
944 | /* exited locked */ | |
945 | } /* if (!hostdata->connected) */ | |
1da177e4 LT |
946 | if (hostdata->connected |
947 | #ifdef REAL_DMA | |
948 | && !hostdata->dmalen | |
949 | #endif | |
1da177e4 | 950 | ) { |
52a6a1cb | 951 | dprintk(NDEBUG_MAIN, "scsi%d : main() : performing information transfer\n", instance->host_no); |
1da177e4 | 952 | NCR5380_information_transfer(instance); |
52a6a1cb | 953 | dprintk(NDEBUG_MAIN, "scsi%d : main() : done set false\n", instance->host_no); |
1da177e4 | 954 | done = 0; |
1d3db59d | 955 | } |
1da177e4 LT |
956 | } while (!done); |
957 | ||
958 | spin_unlock_irq(instance->host_lock); | |
959 | } | |
960 | ||
961 | #ifndef DONT_USE_INTR | |
962 | ||
963 | /** | |
964 | * NCR5380_intr - generic NCR5380 irq handler | |
965 | * @irq: interrupt number | |
966 | * @dev_id: device info | |
1da177e4 LT |
967 | * |
968 | * Handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses | |
969 | * from the disconnected queue, and restarting NCR5380_main() | |
970 | * as required. | |
971 | * | |
972 | * Locks: takes the needed instance locks | |
973 | */ | |
974 | ||
baa9aac6 | 975 | static irqreturn_t NCR5380_intr(int dummy, void *dev_id) |
1da177e4 | 976 | { |
baa9aac6 | 977 | struct Scsi_Host *instance = dev_id; |
1da177e4 LT |
978 | struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; |
979 | int done; | |
980 | unsigned char basr; | |
981 | unsigned long flags; | |
982 | ||
52a6a1cb FT |
983 | dprintk(NDEBUG_INTR, "scsi : NCR5380 irq %d triggered\n", |
984 | instance->irq); | |
1da177e4 LT |
985 | |
986 | do { | |
987 | done = 1; | |
988 | spin_lock_irqsave(instance->host_lock, flags); | |
989 | /* Look for pending interrupts */ | |
1da177e4 LT |
990 | basr = NCR5380_read(BUS_AND_STATUS_REG); |
991 | /* XXX dispatch to appropriate routine if found and done=0 */ | |
992 | if (basr & BASR_IRQ) { | |
993 | NCR5380_dprint(NDEBUG_INTR, instance); | |
994 | if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) { | |
995 | done = 0; | |
52a6a1cb | 996 | dprintk(NDEBUG_INTR, "scsi%d : SEL interrupt\n", instance->host_no); |
1da177e4 LT |
997 | NCR5380_reselect(instance); |
998 | (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG); | |
999 | } else if (basr & BASR_PARITY_ERROR) { | |
52a6a1cb | 1000 | dprintk(NDEBUG_INTR, "scsi%d : PARITY interrupt\n", instance->host_no); |
1da177e4 LT |
1001 | (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG); |
1002 | } else if ((NCR5380_read(STATUS_REG) & SR_RST) == SR_RST) { | |
52a6a1cb | 1003 | dprintk(NDEBUG_INTR, "scsi%d : RESET interrupt\n", instance->host_no); |
1da177e4 LT |
1004 | (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG); |
1005 | } else { | |
1006 | #if defined(REAL_DMA) | |
1007 | /* | |
1008 | * We should only get PHASE MISMATCH and EOP interrupts | |
1009 | * if we have DMA enabled, so do a sanity check based on | |
1010 | * the current setting of the MODE register. | |
1011 | */ | |
1012 | ||
1013 | if ((NCR5380_read(MODE_REG) & MR_DMA) && ((basr & BASR_END_DMA_TRANSFER) || !(basr & BASR_PHASE_MATCH))) { | |
25985edc | 1014 | int transferred; |
1da177e4 LT |
1015 | |
1016 | if (!hostdata->connected) | |
1017 | panic("scsi%d : received end of DMA interrupt with no connected cmd\n", instance->hostno); | |
1018 | ||
25985edc | 1019 | transferred = (hostdata->dmalen - NCR5380_dma_residual(instance)); |
1da177e4 LT |
1020 | hostdata->connected->SCp.this_residual -= transferred; |
1021 | hostdata->connected->SCp.ptr += transferred; | |
1022 | hostdata->dmalen = 0; | |
1023 | ||
1024 | (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG); | |
1025 | ||
1026 | /* FIXME: we need to poll briefly then defer a workqueue task ! */ | |
1027 | NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG, BASR_ACK, 0, 2*HZ); | |
1028 | ||
1029 | NCR5380_write(MODE_REG, MR_BASE); | |
1030 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
1031 | } | |
1032 | #else | |
52a6a1cb | 1033 | dprintk(NDEBUG_INTR, "scsi : unknown interrupt, BASR 0x%X, MR 0x%X, SR 0x%x\n", basr, NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG)); |
1da177e4 LT |
1034 | (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG); |
1035 | #endif | |
1036 | } | |
1037 | } /* if BASR_IRQ */ | |
1038 | spin_unlock_irqrestore(instance->host_lock, flags); | |
1039 | if(!done) | |
0ad0eff9 FT |
1040 | queue_delayed_work(hostdata->work_q, |
1041 | &hostdata->coroutine, 0); | |
1da177e4 LT |
1042 | } while (!done); |
1043 | return IRQ_HANDLED; | |
1044 | } | |
1045 | ||
1046 | #endif | |
1047 | ||
1da177e4 | 1048 | /* |
710ddd0d FT |
1049 | * Function : int NCR5380_select(struct Scsi_Host *instance, |
1050 | * struct scsi_cmnd *cmd) | |
1da177e4 LT |
1051 | * |
1052 | * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command, | |
1053 | * including ARBITRATION, SELECTION, and initial message out for | |
1054 | * IDENTIFY and queue messages. | |
1055 | * | |
1056 | * Inputs : instance - instantiation of the 5380 driver on which this | |
76f13b93 | 1057 | * target lives, cmd - SCSI command to execute. |
1da177e4 | 1058 | * |
6323876f FT |
1059 | * Returns : -1 if selection failed but should be retried. |
1060 | * 0 if selection failed and should not be retried. | |
1061 | * 0 if selection succeeded completely (hostdata->connected == cmd). | |
1da177e4 LT |
1062 | * |
1063 | * Side effects : | |
1064 | * If bus busy, arbitration failed, etc, NCR5380_select() will exit | |
1065 | * with registers as they should have been on entry - ie | |
1066 | * SELECT_ENABLE will be set appropriately, the NCR5380 | |
1067 | * will cease to drive any SCSI bus signals. | |
1068 | * | |
1069 | * If successful : I_T_L or I_T_L_Q nexus will be established, | |
1070 | * instance->connected will be set to cmd. | |
1071 | * SELECT interrupt will be disabled. | |
1072 | * | |
1073 | * If failed (no target) : cmd->scsi_done() will be called, and the | |
1074 | * cmd->result host byte set to DID_BAD_TARGET. | |
1075 | * | |
1076 | * Locks: caller holds hostdata lock in IRQ mode | |
1077 | */ | |
1078 | ||
710ddd0d | 1079 | static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) |
1da177e4 | 1080 | { |
1da177e4 LT |
1081 | struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; |
1082 | unsigned char tmp[3], phase; | |
1083 | unsigned char *data; | |
1084 | int len; | |
1da177e4 | 1085 | int err; |
1da177e4 | 1086 | |
1da177e4 | 1087 | NCR5380_dprint(NDEBUG_ARBITRATION, instance); |
52a6a1cb | 1088 | dprintk(NDEBUG_ARBITRATION, "scsi%d : starting arbitration, id = %d\n", instance->host_no, instance->this_id); |
1da177e4 LT |
1089 | |
1090 | /* | |
1091 | * Set the phase bits to 0, otherwise the NCR5380 won't drive the | |
1092 | * data bus during SELECTION. | |
1093 | */ | |
1094 | ||
1095 | NCR5380_write(TARGET_COMMAND_REG, 0); | |
1096 | ||
1097 | /* | |
1098 | * Start arbitration. | |
1099 | */ | |
1100 | ||
1101 | NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask); | |
1102 | NCR5380_write(MODE_REG, MR_ARBITRATE); | |
1103 | ||
1104 | ||
1105 | /* We can be relaxed here, interrupts are on, we are | |
1106 | in workqueue context, the birds are singing in the trees */ | |
1107 | spin_unlock_irq(instance->host_lock); | |
1108 | err = NCR5380_poll_politely(instance, INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS, ICR_ARBITRATION_PROGRESS, 5*HZ); | |
1109 | spin_lock_irq(instance->host_lock); | |
1110 | if (err < 0) { | |
1111 | printk(KERN_DEBUG "scsi: arbitration timeout at %d\n", __LINE__); | |
1112 | NCR5380_write(MODE_REG, MR_BASE); | |
1113 | NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); | |
6323876f | 1114 | return -1; |
1da177e4 LT |
1115 | } |
1116 | ||
52a6a1cb | 1117 | dprintk(NDEBUG_ARBITRATION, "scsi%d : arbitration complete\n", instance->host_no); |
1da177e4 LT |
1118 | |
1119 | /* | |
1120 | * The arbitration delay is 2.2us, but this is a minimum and there is | |
1121 | * no maximum so we can safely sleep for ceil(2.2) usecs to accommodate | |
1122 | * the integral nature of udelay(). | |
1123 | * | |
1124 | */ | |
1125 | ||
1126 | udelay(3); | |
1127 | ||
1128 | /* Check for lost arbitration */ | |
1129 | if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) { | |
1130 | NCR5380_write(MODE_REG, MR_BASE); | |
52a6a1cb | 1131 | dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", instance->host_no); |
6323876f | 1132 | return -1; |
1da177e4 | 1133 | } |
cf13b083 FT |
1134 | |
1135 | /* After/during arbitration, BSY should be asserted. | |
1136 | * IBM DPES-31080 Version S31Q works now | |
1137 | * Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman) | |
1138 | */ | |
1139 | NCR5380_write(INITIATOR_COMMAND_REG, | |
1140 | ICR_BASE | ICR_ASSERT_SEL | ICR_ASSERT_BSY); | |
1da177e4 LT |
1141 | |
1142 | if (!(hostdata->flags & FLAG_DTC3181E) && | |
1143 | /* RvC: DTC3181E has some trouble with this | |
1144 | * so we simply removed it. Seems to work with | |
1145 | * only Mustek scanner attached | |
1146 | */ | |
1147 | (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) { | |
1148 | NCR5380_write(MODE_REG, MR_BASE); | |
1149 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
52a6a1cb | 1150 | dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting ICR_ASSERT_SEL\n", instance->host_no); |
6323876f | 1151 | return -1; |
1da177e4 LT |
1152 | } |
1153 | /* | |
1154 | * Again, bus clear + bus settle time is 1.2us, however, this is | |
1155 | * a minimum so we'll udelay ceil(1.2) | |
1156 | */ | |
1157 | ||
9c3f0e2b FT |
1158 | if (hostdata->flags & FLAG_TOSHIBA_DELAY) |
1159 | udelay(15); | |
1160 | else | |
1161 | udelay(2); | |
1da177e4 | 1162 | |
52a6a1cb | 1163 | dprintk(NDEBUG_ARBITRATION, "scsi%d : won arbitration\n", instance->host_no); |
1da177e4 LT |
1164 | |
1165 | /* | |
1166 | * Now that we have won arbitration, start Selection process, asserting | |
1167 | * the host and target ID's on the SCSI bus. | |
1168 | */ | |
1169 | ||
422c0d61 | 1170 | NCR5380_write(OUTPUT_DATA_REG, (hostdata->id_mask | (1 << scmd_id(cmd)))); |
1da177e4 LT |
1171 | |
1172 | /* | |
1173 | * Raise ATN while SEL is true before BSY goes false from arbitration, | |
1174 | * since this is the only way to guarantee that we'll get a MESSAGE OUT | |
1175 | * phase immediately after selection. | |
1176 | */ | |
1177 | ||
1178 | NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_BSY | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL)); | |
1179 | NCR5380_write(MODE_REG, MR_BASE); | |
1180 | ||
1181 | /* | |
1182 | * Reselect interrupts must be turned off prior to the dropping of BSY, | |
1183 | * otherwise we will trigger an interrupt. | |
1184 | */ | |
1185 | NCR5380_write(SELECT_ENABLE_REG, 0); | |
1186 | ||
1187 | /* | |
1188 | * The initiator shall then wait at least two deskew delays and release | |
1189 | * the BSY signal. | |
1190 | */ | |
1191 | udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */ | |
1192 | ||
1193 | /* Reset BSY */ | |
1194 | NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL)); | |
1195 | ||
1196 | /* | |
1197 | * Something weird happens when we cease to drive BSY - looks | |
1198 | * like the board/chip is letting us do another read before the | |
1199 | * appropriate propagation delay has expired, and we're confusing | |
1200 | * a BSY signal from ourselves as the target's response to SELECTION. | |
1201 | * | |
1202 | * A small delay (the 'C++' frontend breaks the pipeline with an | |
1203 | * unnecessary jump, making it work on my 386-33/Trantor T128, the | |
1204 | * tighter 'C' code breaks and requires this) solves the problem - | |
1205 | * the 1 us delay is arbitrary, and only used because this delay will | |
1206 | * be the same on other platforms and since it works here, it should | |
1207 | * work there. | |
1208 | * | |
1209 | * wingel suggests that this could be due to failing to wait | |
1210 | * one deskew delay. | |
1211 | */ | |
1212 | ||
1213 | udelay(1); | |
1214 | ||
52a6a1cb | 1215 | dprintk(NDEBUG_SELECTION, "scsi%d : selecting target %d\n", instance->host_no, scmd_id(cmd)); |
1da177e4 LT |
1216 | |
1217 | /* | |
1218 | * The SCSI specification calls for a 250 ms timeout for the actual | |
1219 | * selection. | |
1220 | */ | |
1221 | ||
ae753a33 FT |
1222 | err = NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, SR_BSY, |
1223 | msecs_to_jiffies(250)); | |
1da177e4 | 1224 | |
1da177e4 LT |
1225 | if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) { |
1226 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
1227 | NCR5380_reselect(instance); | |
1228 | printk("scsi%d : reselection after won arbitration?\n", instance->host_no); | |
1229 | NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); | |
1230 | return -1; | |
1231 | } | |
ae753a33 FT |
1232 | |
1233 | if (err < 0) { | |
1234 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
1235 | cmd->result = DID_BAD_TARGET << 16; | |
1236 | cmd->scsi_done(cmd); | |
1237 | NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); | |
1238 | dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n", | |
1239 | instance->host_no); | |
1240 | return 0; | |
1241 | } | |
1242 | ||
1da177e4 LT |
1243 | /* |
1244 | * No less than two deskew delays after the initiator detects the | |
1245 | * BSY signal is true, it shall release the SEL signal and may | |
1246 | * change the DATA BUS. -wingel | |
1247 | */ | |
1248 | ||
1249 | udelay(1); | |
1250 | ||
1251 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); | |
1252 | ||
1da177e4 LT |
1253 | /* |
1254 | * Since we followed the SCSI spec, and raised ATN while SEL | |
1255 | * was true but before BSY was false during selection, the information | |
1256 | * transfer phase should be a MESSAGE OUT phase so that we can send the | |
1257 | * IDENTIFY message. | |
1258 | * | |
1259 | * If SCSI-II tagged queuing is enabled, we also send a SIMPLE_QUEUE_TAG | |
1260 | * message (2 bytes) with a tag ID that we increment with every command | |
1261 | * until it wraps back to 0. | |
1262 | * | |
1263 | * XXX - it turns out that there are some broken SCSI-II devices, | |
1264 | * which claim to support tagged queuing but fail when more than | |
1265 | * some number of commands are issued at once. | |
1266 | */ | |
1267 | ||
1268 | /* Wait for start of REQ/ACK handshake */ | |
1269 | ||
1270 | spin_unlock_irq(instance->host_lock); | |
1271 | err = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ); | |
1272 | spin_lock_irq(instance->host_lock); | |
1273 | ||
1274 | if(err) { | |
1275 | printk(KERN_ERR "scsi%d: timeout at NCR5380.c:%d\n", instance->host_no, __LINE__); | |
1276 | NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); | |
6323876f | 1277 | return -1; |
1da177e4 LT |
1278 | } |
1279 | ||
52a6a1cb | 1280 | dprintk(NDEBUG_SELECTION, "scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->device->id); |
22f5f10d | 1281 | tmp[0] = IDENTIFY(((instance->irq == NO_IRQ) ? 0 : 1), cmd->device->lun); |
1da177e4 LT |
1282 | |
1283 | len = 1; | |
1284 | cmd->tag = 0; | |
1285 | ||
1286 | /* Send message(s) */ | |
1287 | data = tmp; | |
1288 | phase = PHASE_MSGOUT; | |
1289 | NCR5380_transfer_pio(instance, &phase, &len, &data); | |
52a6a1cb | 1290 | dprintk(NDEBUG_SELECTION, "scsi%d : nexus established.\n", instance->host_no); |
1da177e4 LT |
1291 | /* XXX need to handle errors here */ |
1292 | hostdata->connected = cmd; | |
9cb78c16 | 1293 | hostdata->busy[cmd->device->id] |= (1 << (cmd->device->lun & 0xFF)); |
1da177e4 | 1294 | |
28424d3a | 1295 | initialize_SCp(cmd); |
1da177e4 LT |
1296 | |
1297 | return 0; | |
1da177e4 LT |
1298 | } |
1299 | ||
1300 | /* | |
1301 | * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance, | |
1302 | * unsigned char *phase, int *count, unsigned char **data) | |
1303 | * | |
1304 | * Purpose : transfers data in given phase using polled I/O | |
1305 | * | |
1306 | * Inputs : instance - instance of driver, *phase - pointer to | |
1307 | * what phase is expected, *count - pointer to number of | |
1308 | * bytes to transfer, **data - pointer to data pointer. | |
1309 | * | |
1310 | * Returns : -1 when different phase is entered without transferring | |
25985edc | 1311 | * maximum number of bytes, 0 if all bytes or transferred or exit |
1da177e4 LT |
1312 | * is in same phase. |
1313 | * | |
1314 | * Also, *phase, *count, *data are modified in place. | |
1315 | * | |
1316 | * XXX Note : handling for bus free may be useful. | |
1317 | */ | |
1318 | ||
1319 | /* | |
1320 | * Note : this code is not as quick as it could be, however it | |
1321 | * IS 100% reliable, and for the actual data transfer where speed | |
1322 | * counts, we will always do a pseudo DMA or DMA transfer. | |
1323 | */ | |
1324 | ||
1325 | static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) { | |
1da177e4 LT |
1326 | unsigned char p = *phase, tmp; |
1327 | int c = *count; | |
1328 | unsigned char *d = *data; | |
1da177e4 LT |
1329 | |
1330 | if (!(p & SR_IO)) | |
52a6a1cb | 1331 | dprintk(NDEBUG_PIO, "scsi%d : pio write %d bytes\n", instance->host_no, c); |
1da177e4 | 1332 | else |
52a6a1cb | 1333 | dprintk(NDEBUG_PIO, "scsi%d : pio read %d bytes\n", instance->host_no, c); |
1da177e4 LT |
1334 | |
1335 | /* | |
1336 | * The NCR5380 chip will only drive the SCSI bus when the | |
1337 | * phase specified in the appropriate bits of the TARGET COMMAND | |
1338 | * REGISTER match the STATUS REGISTER | |
1339 | */ | |
1340 | ||
1341 | NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p)); | |
1342 | ||
1da177e4 LT |
1343 | do { |
1344 | /* | |
1345 | * Wait for assertion of REQ, after which the phase bits will be | |
1346 | * valid | |
1347 | */ | |
1348 | ||
686f3990 | 1349 | if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0) |
1da177e4 | 1350 | break; |
1da177e4 | 1351 | |
52a6a1cb | 1352 | dprintk(NDEBUG_HANDSHAKE, "scsi%d : REQ detected\n", instance->host_no); |
1da177e4 LT |
1353 | |
1354 | /* Check for phase mismatch */ | |
686f3990 | 1355 | if ((NCR5380_read(STATUS_REG) & PHASE_MASK) != p) { |
52a6a1cb | 1356 | dprintk(NDEBUG_HANDSHAKE, "scsi%d : phase mismatch\n", instance->host_no); |
1da177e4 LT |
1357 | NCR5380_dprint_phase(NDEBUG_HANDSHAKE, instance); |
1358 | break; | |
1359 | } | |
1360 | /* Do actual transfer from SCSI bus to / from memory */ | |
1361 | if (!(p & SR_IO)) | |
1362 | NCR5380_write(OUTPUT_DATA_REG, *d); | |
1363 | else | |
1364 | *d = NCR5380_read(CURRENT_SCSI_DATA_REG); | |
1365 | ||
1366 | ++d; | |
1367 | ||
1368 | /* | |
1369 | * The SCSI standard suggests that in MSGOUT phase, the initiator | |
1370 | * should drop ATN on the last byte of the message phase | |
1371 | * after REQ has been asserted for the handshake but before | |
1372 | * the initiator raises ACK. | |
1373 | */ | |
1374 | ||
1375 | if (!(p & SR_IO)) { | |
1376 | if (!((p & SR_MSG) && c > 1)) { | |
1377 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA); | |
1378 | NCR5380_dprint(NDEBUG_PIO, instance); | |
1379 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ACK); | |
1380 | } else { | |
1381 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN); | |
1382 | NCR5380_dprint(NDEBUG_PIO, instance); | |
1383 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK); | |
1384 | } | |
1385 | } else { | |
1386 | NCR5380_dprint(NDEBUG_PIO, instance); | |
1387 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK); | |
1388 | } | |
1389 | ||
a2edc4a6 FT |
1390 | if (NCR5380_poll_politely(instance, |
1391 | STATUS_REG, SR_REQ, 0, 5 * HZ) < 0) | |
1392 | break; | |
1393 | ||
52a6a1cb | 1394 | dprintk(NDEBUG_HANDSHAKE, "scsi%d : req false, handshake complete\n", instance->host_no); |
1da177e4 LT |
1395 | |
1396 | /* | |
1397 | * We have several special cases to consider during REQ/ACK handshaking : | |
1398 | * 1. We were in MSGOUT phase, and we are on the last byte of the | |
1399 | * message. ATN must be dropped as ACK is dropped. | |
1400 | * | |
1401 | * 2. We are in a MSGIN phase, and we are on the last byte of the | |
1402 | * message. We must exit with ACK asserted, so that the calling | |
1403 | * code may raise ATN before dropping ACK to reject the message. | |
1404 | * | |
1405 | * 3. ACK and ATN are clear and the target may proceed as normal. | |
1406 | */ | |
1407 | if (!(p == PHASE_MSGIN && c == 1)) { | |
1408 | if (p == PHASE_MSGOUT && c > 1) | |
1409 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); | |
1410 | else | |
1411 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
1412 | } | |
1413 | } while (--c); | |
1414 | ||
52a6a1cb | 1415 | dprintk(NDEBUG_PIO, "scsi%d : residual %d\n", instance->host_no, c); |
1da177e4 LT |
1416 | |
1417 | *count = c; | |
1418 | *data = d; | |
1419 | tmp = NCR5380_read(STATUS_REG); | |
a2edc4a6 FT |
1420 | /* The phase read from the bus is valid if either REQ is (already) |
1421 | * asserted or if ACK hasn't been released yet. The latter applies if | |
1422 | * we're in MSG IN, DATA IN or STATUS and all bytes have been received. | |
1423 | */ | |
1424 | if ((tmp & SR_REQ) || ((tmp & SR_IO) && c == 0)) | |
1da177e4 LT |
1425 | *phase = tmp & PHASE_MASK; |
1426 | else | |
1427 | *phase = PHASE_UNKNOWN; | |
1428 | ||
1429 | if (!c || (*phase == p)) | |
1430 | return 0; | |
1431 | else | |
1432 | return -1; | |
1433 | } | |
1434 | ||
1435 | /** | |
636b1ec8 FT |
1436 | * do_reset - issue a reset command |
1437 | * @instance: adapter to reset | |
1da177e4 | 1438 | * |
636b1ec8 FT |
1439 | * Issue a reset sequence to the NCR5380 and try and get the bus |
1440 | * back into sane shape. | |
1da177e4 | 1441 | * |
636b1ec8 FT |
1442 | * This clears the reset interrupt flag because there may be no handler for |
1443 | * it. When the driver is initialized, the NCR5380_intr() handler has not yet | |
1444 | * been installed. And when in EH we may have released the ST DMA interrupt. | |
1da177e4 LT |
1445 | */ |
1446 | ||
54d8fe44 FT |
1447 | static void do_reset(struct Scsi_Host *instance) |
1448 | { | |
636b1ec8 FT |
1449 | unsigned long flags; |
1450 | ||
1451 | local_irq_save(flags); | |
1452 | NCR5380_write(TARGET_COMMAND_REG, | |
1453 | PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK)); | |
1da177e4 | 1454 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST); |
636b1ec8 | 1455 | udelay(50); |
1da177e4 | 1456 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); |
636b1ec8 FT |
1457 | (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG); |
1458 | local_irq_restore(flags); | |
1da177e4 LT |
1459 | } |
1460 | ||
1461 | /* | |
1462 | * Function : do_abort (Scsi_Host *host) | |
1463 | * | |
1464 | * Purpose : abort the currently established nexus. Should only be | |
1465 | * called from a routine which can drop into a | |
1466 | * | |
1467 | * Returns : 0 on success, -1 on failure. | |
1468 | * | |
1469 | * Locks: queue lock held by caller | |
1470 | * FIXME: sort this out and get new_eh running | |
1471 | */ | |
1472 | ||
54d8fe44 FT |
1473 | static int do_abort(struct Scsi_Host *instance) |
1474 | { | |
1da177e4 LT |
1475 | unsigned char *msgptr, phase, tmp; |
1476 | int len; | |
1477 | int rc; | |
1da177e4 LT |
1478 | |
1479 | /* Request message out phase */ | |
1480 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); | |
1481 | ||
1482 | /* | |
1483 | * Wait for the target to indicate a valid phase by asserting | |
1484 | * REQ. Once this happens, we'll have either a MSGOUT phase | |
1485 | * and can immediately send the ABORT message, or we'll have some | |
1486 | * other phase and will have to source/sink data. | |
1487 | * | |
1488 | * We really don't care what value was on the bus or what value | |
1489 | * the target sees, so we just handshake. | |
1490 | */ | |
1491 | ||
54d8fe44 | 1492 | rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 60 * HZ); |
1da177e4 LT |
1493 | |
1494 | if(rc < 0) | |
1495 | return -1; | |
1496 | ||
1497 | tmp = (unsigned char)rc; | |
1498 | ||
1499 | NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp)); | |
1500 | ||
1501 | if ((tmp & PHASE_MASK) != PHASE_MSGOUT) { | |
1502 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK); | |
54d8fe44 | 1503 | rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ); |
1da177e4 LT |
1504 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); |
1505 | if(rc == -1) | |
1506 | return -1; | |
1507 | } | |
1508 | tmp = ABORT; | |
1509 | msgptr = &tmp; | |
1510 | len = 1; | |
1511 | phase = PHASE_MSGOUT; | |
54d8fe44 | 1512 | NCR5380_transfer_pio(instance, &phase, &len, &msgptr); |
1da177e4 LT |
1513 | |
1514 | /* | |
1515 | * If we got here, and the command completed successfully, | |
1516 | * we're about to go into bus free state. | |
1517 | */ | |
1518 | ||
1519 | return len ? -1 : 0; | |
1520 | } | |
1521 | ||
1522 | #if defined(REAL_DMA) || defined(PSEUDO_DMA) || defined (REAL_DMA_POLL) | |
1523 | /* | |
1524 | * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance, | |
1525 | * unsigned char *phase, int *count, unsigned char **data) | |
1526 | * | |
1527 | * Purpose : transfers data in given phase using either real | |
1528 | * or pseudo DMA. | |
1529 | * | |
1530 | * Inputs : instance - instance of driver, *phase - pointer to | |
1531 | * what phase is expected, *count - pointer to number of | |
1532 | * bytes to transfer, **data - pointer to data pointer. | |
1533 | * | |
1534 | * Returns : -1 when different phase is entered without transferring | |
25985edc | 1535 | * maximum number of bytes, 0 if all bytes or transferred or exit |
1da177e4 LT |
1536 | * is in same phase. |
1537 | * | |
1538 | * Also, *phase, *count, *data are modified in place. | |
1539 | * | |
1540 | * Locks: io_request lock held by caller | |
1541 | */ | |
1542 | ||
1543 | ||
1544 | static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) { | |
1da177e4 LT |
1545 | register int c = *count; |
1546 | register unsigned char p = *phase; | |
1547 | register unsigned char *d = *data; | |
1548 | unsigned char tmp; | |
1549 | int foo; | |
1550 | #if defined(REAL_DMA_POLL) | |
1551 | int cnt, toPIO; | |
1552 | unsigned char saved_data = 0, overrun = 0, residue; | |
1553 | #endif | |
1554 | ||
1555 | struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; | |
1556 | ||
1da177e4 LT |
1557 | if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) { |
1558 | *phase = tmp; | |
1559 | return -1; | |
1560 | } | |
1561 | #if defined(REAL_DMA) || defined(REAL_DMA_POLL) | |
1562 | #ifdef READ_OVERRUNS | |
1563 | if (p & SR_IO) { | |
1564 | c -= 2; | |
1565 | } | |
1566 | #endif | |
52a6a1cb | 1567 | dprintk(NDEBUG_DMA, "scsi%d : initializing DMA channel %d for %s, %d bytes %s %0x\n", instance->host_no, instance->dma_channel, (p & SR_IO) ? "reading" : "writing", c, (p & SR_IO) ? "to" : "from", (unsigned) d); |
1da177e4 LT |
1568 | hostdata->dma_len = (p & SR_IO) ? NCR5380_dma_read_setup(instance, d, c) : NCR5380_dma_write_setup(instance, d, c); |
1569 | #endif | |
1570 | ||
1571 | NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p)); | |
1572 | ||
1573 | #ifdef REAL_DMA | |
1574 | NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_EOP_INTR | MR_MONITOR_BSY); | |
1575 | #elif defined(REAL_DMA_POLL) | |
1576 | NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE); | |
1577 | #else | |
1578 | /* | |
1579 | * Note : on my sample board, watch-dog timeouts occurred when interrupts | |
1580 | * were not disabled for the duration of a single DMA transfer, from | |
1581 | * before the setting of DMA mode to after transfer of the last byte. | |
1582 | */ | |
1583 | ||
1584 | #if defined(PSEUDO_DMA) && defined(UNSAFE) | |
1585 | spin_unlock_irq(instance->host_lock); | |
1586 | #endif | |
1587 | /* KLL May need eop and parity in 53c400 */ | |
1588 | if (hostdata->flags & FLAG_NCR53C400) | |
085267ac RK |
1589 | NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | |
1590 | MR_ENABLE_PAR_CHECK | MR_ENABLE_PAR_INTR | | |
1591 | MR_ENABLE_EOP_INTR | MR_MONITOR_BSY); | |
1da177e4 LT |
1592 | else |
1593 | NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE); | |
1594 | #endif /* def REAL_DMA */ | |
1595 | ||
52a6a1cb | 1596 | dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG)); |
1da177e4 LT |
1597 | |
1598 | /* | |
1599 | * On the PAS16 at least I/O recovery delays are not needed here. | |
1600 | * Everyone else seems to want them. | |
1601 | */ | |
1602 | ||
1603 | if (p & SR_IO) { | |
1604 | io_recovery_delay(1); | |
1605 | NCR5380_write(START_DMA_INITIATOR_RECEIVE_REG, 0); | |
1606 | } else { | |
1607 | io_recovery_delay(1); | |
1608 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA); | |
1609 | io_recovery_delay(1); | |
1610 | NCR5380_write(START_DMA_SEND_REG, 0); | |
1611 | io_recovery_delay(1); | |
1612 | } | |
1613 | ||
1614 | #if defined(REAL_DMA_POLL) | |
1615 | do { | |
1616 | tmp = NCR5380_read(BUS_AND_STATUS_REG); | |
1617 | } while ((tmp & BASR_PHASE_MATCH) && !(tmp & (BASR_BUSY_ERROR | BASR_END_DMA_TRANSFER))); | |
1618 | ||
1619 | /* | |
1620 | At this point, either we've completed DMA, or we have a phase mismatch, | |
1621 | or we've unexpectedly lost BUSY (which is a real error). | |
1622 | ||
1623 | For write DMAs, we want to wait until the last byte has been | |
1624 | transferred out over the bus before we turn off DMA mode. Alas, there | |
1625 | seems to be no terribly good way of doing this on a 5380 under all | |
1626 | conditions. For non-scatter-gather operations, we can wait until REQ | |
1627 | and ACK both go false, or until a phase mismatch occurs. Gather-writes | |
1628 | are nastier, since the device will be expecting more data than we | |
1629 | are prepared to send it, and REQ will remain asserted. On a 53C8[01] we | |
1630 | could test LAST BIT SENT to assure transfer (I imagine this is precisely | |
1631 | why this signal was added to the newer chips) but on the older 538[01] | |
1632 | this signal does not exist. The workaround for this lack is a watchdog; | |
1633 | we bail out of the wait-loop after a modest amount of wait-time if | |
1634 | the usual exit conditions are not met. Not a terribly clean or | |
1635 | correct solution :-% | |
1636 | ||
1637 | Reads are equally tricky due to a nasty characteristic of the NCR5380. | |
1638 | If the chip is in DMA mode for an READ, it will respond to a target's | |
1639 | REQ by latching the SCSI data into the INPUT DATA register and asserting | |
1640 | ACK, even if it has _already_ been notified by the DMA controller that | |
1641 | the current DMA transfer has completed! If the NCR5380 is then taken | |
1642 | out of DMA mode, this already-acknowledged byte is lost. | |
1643 | ||
1644 | This is not a problem for "one DMA transfer per command" reads, because | |
1645 | the situation will never arise... either all of the data is DMA'ed | |
1646 | properly, or the target switches to MESSAGE IN phase to signal a | |
1647 | disconnection (either operation bringing the DMA to a clean halt). | |
1648 | However, in order to handle scatter-reads, we must work around the | |
1649 | problem. The chosen fix is to DMA N-2 bytes, then check for the | |
1650 | condition before taking the NCR5380 out of DMA mode. One or two extra | |
1651 | bytes are transferred via PIO as necessary to fill out the original | |
1652 | request. | |
1653 | */ | |
1654 | ||
1655 | if (p & SR_IO) { | |
1656 | #ifdef READ_OVERRUNS | |
1657 | udelay(10); | |
1658 | if (((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) == (BASR_PHASE_MATCH | BASR_ACK))) { | |
1659 | saved_data = NCR5380_read(INPUT_DATA_REGISTER); | |
1660 | overrun = 1; | |
1661 | } | |
1662 | #endif | |
1663 | } else { | |
1664 | int limit = 100; | |
1665 | while (((tmp = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_ACK) || (NCR5380_read(STATUS_REG) & SR_REQ)) { | |
1666 | if (!(tmp & BASR_PHASE_MATCH)) | |
1667 | break; | |
1668 | if (--limit < 0) | |
1669 | break; | |
1670 | } | |
1671 | } | |
1672 | ||
52a6a1cb | 1673 | dprintk(NDEBUG_DMA, "scsi%d : polled DMA transfer complete, basr 0x%X, sr 0x%X\n", instance->host_no, tmp, NCR5380_read(STATUS_REG)); |
1da177e4 LT |
1674 | |
1675 | NCR5380_write(MODE_REG, MR_BASE); | |
1676 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
1677 | ||
1678 | residue = NCR5380_dma_residual(instance); | |
1679 | c -= residue; | |
1680 | *count -= c; | |
1681 | *data += c; | |
1682 | *phase = NCR5380_read(STATUS_REG) & PHASE_MASK; | |
1683 | ||
1684 | #ifdef READ_OVERRUNS | |
1685 | if (*phase == p && (p & SR_IO) && residue == 0) { | |
1686 | if (overrun) { | |
52a6a1cb | 1687 | dprintk(NDEBUG_DMA, "Got an input overrun, using saved byte\n"); |
1da177e4 LT |
1688 | **data = saved_data; |
1689 | *data += 1; | |
1690 | *count -= 1; | |
1691 | cnt = toPIO = 1; | |
1692 | } else { | |
1693 | printk("No overrun??\n"); | |
1694 | cnt = toPIO = 2; | |
1695 | } | |
52a6a1cb | 1696 | dprintk(NDEBUG_DMA, "Doing %d-byte PIO to 0x%X\n", cnt, *data); |
1da177e4 LT |
1697 | NCR5380_transfer_pio(instance, phase, &cnt, data); |
1698 | *count -= toPIO - cnt; | |
1699 | } | |
1700 | #endif | |
1701 | ||
52a6a1cb | 1702 | dprintk(NDEBUG_DMA, "Return with data ptr = 0x%X, count %d, last 0x%X, next 0x%X\n", *data, *count, *(*data + *count - 1), *(*data + *count)); |
1da177e4 LT |
1703 | return 0; |
1704 | ||
1705 | #elif defined(REAL_DMA) | |
1706 | return 0; | |
1707 | #else /* defined(REAL_DMA_POLL) */ | |
1708 | if (p & SR_IO) { | |
1709 | #ifdef DMA_WORKS_RIGHT | |
1710 | foo = NCR5380_pread(instance, d, c); | |
1711 | #else | |
1712 | int diff = 1; | |
1713 | if (hostdata->flags & FLAG_NCR53C400) { | |
1714 | diff = 0; | |
1715 | } | |
1716 | if (!(foo = NCR5380_pread(instance, d, c - diff))) { | |
1717 | /* | |
1718 | * We can't disable DMA mode after successfully transferring | |
1719 | * what we plan to be the last byte, since that would open up | |
1720 | * a race condition where if the target asserted REQ before | |
1721 | * we got the DMA mode reset, the NCR5380 would have latched | |
1722 | * an additional byte into the INPUT DATA register and we'd | |
1723 | * have dropped it. | |
1724 | * | |
1725 | * The workaround was to transfer one fewer bytes than we | |
1726 | * intended to with the pseudo-DMA read function, wait for | |
1727 | * the chip to latch the last byte, read it, and then disable | |
1728 | * pseudo-DMA mode. | |
1729 | * | |
1730 | * After REQ is asserted, the NCR5380 asserts DRQ and ACK. | |
1731 | * REQ is deasserted when ACK is asserted, and not reasserted | |
1732 | * until ACK goes false. Since the NCR5380 won't lower ACK | |
1733 | * until DACK is asserted, which won't happen unless we twiddle | |
1734 | * the DMA port or we take the NCR5380 out of DMA mode, we | |
1735 | * can guarantee that we won't handshake another extra | |
1736 | * byte. | |
1737 | */ | |
1738 | ||
1739 | if (!(hostdata->flags & FLAG_NCR53C400)) { | |
1740 | while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)); | |
1741 | /* Wait for clean handshake */ | |
1742 | while (NCR5380_read(STATUS_REG) & SR_REQ); | |
1743 | d[c - 1] = NCR5380_read(INPUT_DATA_REG); | |
1744 | } | |
1745 | } | |
1746 | #endif | |
1747 | } else { | |
1748 | #ifdef DMA_WORKS_RIGHT | |
1749 | foo = NCR5380_pwrite(instance, d, c); | |
1750 | #else | |
1751 | int timeout; | |
52a6a1cb | 1752 | dprintk(NDEBUG_C400_PWRITE, "About to pwrite %d bytes\n", c); |
1da177e4 LT |
1753 | if (!(foo = NCR5380_pwrite(instance, d, c))) { |
1754 | /* | |
1755 | * Wait for the last byte to be sent. If REQ is being asserted for | |
1756 | * the byte we're interested, we'll ACK it and it will go false. | |
1757 | */ | |
1758 | if (!(hostdata->flags & FLAG_HAS_LAST_BYTE_SENT)) { | |
1759 | timeout = 20000; | |
1760 | while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) && (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)); | |
1761 | ||
1762 | if (!timeout) | |
52a6a1cb | 1763 | dprintk(NDEBUG_LAST_BYTE_SENT, "scsi%d : timed out on last byte\n", instance->host_no); |
1da177e4 LT |
1764 | |
1765 | if (hostdata->flags & FLAG_CHECK_LAST_BYTE_SENT) { | |
1766 | hostdata->flags &= ~FLAG_CHECK_LAST_BYTE_SENT; | |
1767 | if (NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT) { | |
1768 | hostdata->flags |= FLAG_HAS_LAST_BYTE_SENT; | |
52a6a1cb | 1769 | dprintk(NDEBUG_LAST_BYTE_SENT, "scsi%d : last byte sent works\n", instance->host_no); |
1da177e4 LT |
1770 | } |
1771 | } | |
1772 | } else { | |
52a6a1cb | 1773 | dprintk(NDEBUG_C400_PWRITE, "Waiting for LASTBYTE\n"); |
1da177e4 | 1774 | while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT)); |
52a6a1cb | 1775 | dprintk(NDEBUG_C400_PWRITE, "Got LASTBYTE\n"); |
1da177e4 LT |
1776 | } |
1777 | } | |
1778 | #endif | |
1779 | } | |
1780 | NCR5380_write(MODE_REG, MR_BASE); | |
1781 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
1782 | ||
1783 | if ((!(p & SR_IO)) && (hostdata->flags & FLAG_NCR53C400)) { | |
52a6a1cb | 1784 | dprintk(NDEBUG_C400_PWRITE, "53C400w: Checking for IRQ\n"); |
1da177e4 | 1785 | if (NCR5380_read(BUS_AND_STATUS_REG) & BASR_IRQ) { |
52a6a1cb | 1786 | dprintk(NDEBUG_C400_PWRITE, "53C400w: got it, reading reset interrupt reg\n"); |
1da177e4 LT |
1787 | NCR5380_read(RESET_PARITY_INTERRUPT_REG); |
1788 | } else { | |
1789 | printk("53C400w: IRQ NOT THERE!\n"); | |
1790 | } | |
1791 | } | |
1792 | *data = d + c; | |
1793 | *count = 0; | |
1794 | *phase = NCR5380_read(STATUS_REG) & PHASE_MASK; | |
1795 | #if defined(PSEUDO_DMA) && defined(UNSAFE) | |
1796 | spin_lock_irq(instance->host_lock); | |
1797 | #endif /* defined(REAL_DMA_POLL) */ | |
1798 | return foo; | |
1799 | #endif /* def REAL_DMA */ | |
1800 | } | |
1801 | #endif /* defined(REAL_DMA) | defined(PSEUDO_DMA) */ | |
1802 | ||
1803 | /* | |
1804 | * Function : NCR5380_information_transfer (struct Scsi_Host *instance) | |
1805 | * | |
1806 | * Purpose : run through the various SCSI phases and do as the target | |
1807 | * directs us to. Operates on the currently connected command, | |
1808 | * instance->connected. | |
1809 | * | |
1810 | * Inputs : instance, instance for which we are doing commands | |
1811 | * | |
1812 | * Side effects : SCSI things happen, the disconnected queue will be | |
1813 | * modified if a command disconnects, *instance->connected will | |
1814 | * change. | |
1815 | * | |
1816 | * XXX Note : we need to watch for bus free or a reset condition here | |
1817 | * to recover from an unexpected bus free condition. | |
1818 | * | |
1819 | * Locks: io_request_lock held by caller in IRQ mode | |
1820 | */ | |
1821 | ||
1822 | static void NCR5380_information_transfer(struct Scsi_Host *instance) { | |
1da177e4 LT |
1823 | struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *)instance->hostdata; |
1824 | unsigned char msgout = NOP; | |
1825 | int sink = 0; | |
1826 | int len; | |
1827 | #if defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) | |
1828 | int transfersize; | |
1829 | #endif | |
1830 | unsigned char *data; | |
1831 | unsigned char phase, tmp, extended_msg[10], old_phase = 0xff; | |
710ddd0d | 1832 | struct scsi_cmnd *cmd = (struct scsi_cmnd *) hostdata->connected; |
1da177e4 | 1833 | |
1da177e4 LT |
1834 | while (1) { |
1835 | tmp = NCR5380_read(STATUS_REG); | |
1836 | /* We only have a valid SCSI phase when REQ is asserted */ | |
1837 | if (tmp & SR_REQ) { | |
1838 | phase = (tmp & PHASE_MASK); | |
1839 | if (phase != old_phase) { | |
1840 | old_phase = phase; | |
1841 | NCR5380_dprint_phase(NDEBUG_INFORMATION, instance); | |
1842 | } | |
1843 | if (sink && (phase != PHASE_MSGOUT)) { | |
1844 | NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp)); | |
1845 | ||
1846 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK); | |
1847 | while (NCR5380_read(STATUS_REG) & SR_REQ); | |
1848 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); | |
1849 | sink = 0; | |
1850 | continue; | |
1851 | } | |
1852 | switch (phase) { | |
1853 | case PHASE_DATAIN: | |
1854 | case PHASE_DATAOUT: | |
1855 | #if (NDEBUG & NDEBUG_NO_DATAOUT) | |
1856 | printk("scsi%d : NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n", instance->host_no); | |
1857 | sink = 1; | |
1858 | do_abort(instance); | |
1859 | cmd->result = DID_ERROR << 16; | |
cce99c69 | 1860 | cmd->scsi_done(cmd); |
1da177e4 LT |
1861 | return; |
1862 | #endif | |
1863 | /* | |
1864 | * If there is no room left in the current buffer in the | |
1865 | * scatter-gather list, move onto the next one. | |
1866 | */ | |
1867 | ||
1868 | if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) { | |
1869 | ++cmd->SCp.buffer; | |
1870 | --cmd->SCp.buffers_residual; | |
1871 | cmd->SCp.this_residual = cmd->SCp.buffer->length; | |
45711f1a | 1872 | cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); |
52a6a1cb | 1873 | dprintk(NDEBUG_INFORMATION, "scsi%d : %d bytes and %d buffers left\n", instance->host_no, cmd->SCp.this_residual, cmd->SCp.buffers_residual); |
1da177e4 LT |
1874 | } |
1875 | /* | |
1876 | * The preferred transfer method is going to be | |
1877 | * PSEUDO-DMA for systems that are strictly PIO, | |
1878 | * since we can let the hardware do the handshaking. | |
1879 | * | |
1880 | * For this to work, we need to know the transfersize | |
1881 | * ahead of time, since the pseudo-DMA code will sit | |
1882 | * in an unconditional loop. | |
1883 | */ | |
1884 | ||
1885 | #if defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) | |
ff3d4578 FT |
1886 | transfersize = 0; |
1887 | if (!cmd->device->borken && | |
1888 | !(hostdata->flags & FLAG_NO_PSEUDO_DMA)) | |
1889 | transfersize = NCR5380_dma_xfer_len(instance, cmd, phase); | |
1890 | ||
1891 | if (transfersize) { | |
1da177e4 LT |
1892 | len = transfersize; |
1893 | if (NCR5380_transfer_dma(instance, &phase, &len, (unsigned char **) &cmd->SCp.ptr)) { | |
1894 | /* | |
1895 | * If the watchdog timer fires, all future accesses to this | |
1896 | * device will use the polled-IO. | |
1897 | */ | |
017560fc JG |
1898 | scmd_printk(KERN_INFO, cmd, |
1899 | "switching to slow handshake\n"); | |
1da177e4 | 1900 | cmd->device->borken = 1; |
1da177e4 LT |
1901 | sink = 1; |
1902 | do_abort(instance); | |
1903 | cmd->result = DID_ERROR << 16; | |
cce99c69 | 1904 | cmd->scsi_done(cmd); |
1da177e4 LT |
1905 | /* XXX - need to source or sink data here, as appropriate */ |
1906 | } else | |
1907 | cmd->SCp.this_residual -= transfersize - len; | |
1908 | } else | |
1909 | #endif /* defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) */ | |
1910 | NCR5380_transfer_pio(instance, &phase, (int *) &cmd->SCp.this_residual, (unsigned char **) | |
1911 | &cmd->SCp.ptr); | |
1912 | break; | |
1913 | case PHASE_MSGIN: | |
1914 | len = 1; | |
1915 | data = &tmp; | |
1916 | NCR5380_transfer_pio(instance, &phase, &len, &data); | |
1917 | cmd->SCp.Message = tmp; | |
1918 | ||
1919 | switch (tmp) { | |
1da177e4 LT |
1920 | case ABORT: |
1921 | case COMMAND_COMPLETE: | |
1922 | /* Accept message by clearing ACK */ | |
1923 | sink = 1; | |
1924 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
1925 | hostdata->connected = NULL; | |
9cb78c16 HR |
1926 | dprintk(NDEBUG_QUEUES, "scsi%d : command for target %d, lun %llu completed\n", instance->host_no, cmd->device->id, cmd->device->lun); |
1927 | hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF)); | |
1da177e4 LT |
1928 | |
1929 | /* | |
1930 | * I'm not sure what the correct thing to do here is : | |
1931 | * | |
1932 | * If the command that just executed is NOT a request | |
1933 | * sense, the obvious thing to do is to set the result | |
1934 | * code to the values of the stored parameters. | |
1935 | * | |
1936 | * If it was a REQUEST SENSE command, we need some way | |
1937 | * to differentiate between the failure code of the original | |
1938 | * and the failure code of the REQUEST sense - the obvious | |
1939 | * case is success, where we fall through and leave the result | |
1940 | * code unchanged. | |
1941 | * | |
1942 | * The non-obvious place is where the REQUEST SENSE failed | |
1943 | */ | |
1944 | ||
1945 | if (cmd->cmnd[0] != REQUEST_SENSE) | |
1946 | cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8); | |
1947 | else if (status_byte(cmd->SCp.Status) != GOOD) | |
1948 | cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16); | |
1949 | ||
28424d3a BH |
1950 | if ((cmd->cmnd[0] == REQUEST_SENSE) && |
1951 | hostdata->ses.cmd_len) { | |
1952 | scsi_eh_restore_cmnd(cmd, &hostdata->ses); | |
1953 | hostdata->ses.cmd_len = 0 ; | |
1954 | } | |
1955 | ||
1da177e4 | 1956 | if ((cmd->cmnd[0] != REQUEST_SENSE) && (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) { |
28424d3a BH |
1957 | scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0); |
1958 | ||
52a6a1cb | 1959 | dprintk(NDEBUG_AUTOSENSE, "scsi%d : performing request sense\n", instance->host_no); |
1da177e4 LT |
1960 | |
1961 | LIST(cmd, hostdata->issue_queue); | |
1962 | cmd->host_scribble = (unsigned char *) | |
1963 | hostdata->issue_queue; | |
710ddd0d | 1964 | hostdata->issue_queue = (struct scsi_cmnd *) cmd; |
52a6a1cb | 1965 | dprintk(NDEBUG_QUEUES, "scsi%d : REQUEST SENSE added to head of issue queue\n", instance->host_no); |
997acab7 | 1966 | } else { |
1da177e4 LT |
1967 | cmd->scsi_done(cmd); |
1968 | } | |
1969 | ||
1970 | NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); | |
1971 | /* | |
1972 | * Restore phase bits to 0 so an interrupted selection, | |
1973 | * arbitration can resume. | |
1974 | */ | |
1975 | NCR5380_write(TARGET_COMMAND_REG, 0); | |
1976 | ||
1977 | while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected) | |
1978 | barrier(); | |
1979 | return; | |
1980 | case MESSAGE_REJECT: | |
1981 | /* Accept message by clearing ACK */ | |
1982 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
1983 | switch (hostdata->last_message) { | |
1984 | case HEAD_OF_QUEUE_TAG: | |
1985 | case ORDERED_QUEUE_TAG: | |
1986 | case SIMPLE_QUEUE_TAG: | |
1987 | cmd->device->simple_tags = 0; | |
9cb78c16 | 1988 | hostdata->busy[cmd->device->id] |= (1 << (cmd->device->lun & 0xFF)); |
1da177e4 LT |
1989 | break; |
1990 | default: | |
1991 | break; | |
1992 | } | |
1993 | case DISCONNECT:{ | |
1994 | /* Accept message by clearing ACK */ | |
1995 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
1da177e4 LT |
1996 | LIST(cmd, hostdata->disconnected_queue); |
1997 | cmd->host_scribble = (unsigned char *) | |
1998 | hostdata->disconnected_queue; | |
1999 | hostdata->connected = NULL; | |
2000 | hostdata->disconnected_queue = cmd; | |
9cb78c16 | 2001 | dprintk(NDEBUG_QUEUES, "scsi%d : command for target %d lun %llu was moved from connected to" " the disconnected_queue\n", instance->host_no, cmd->device->id, cmd->device->lun); |
1da177e4 LT |
2002 | /* |
2003 | * Restore phase bits to 0 so an interrupted selection, | |
2004 | * arbitration can resume. | |
2005 | */ | |
2006 | NCR5380_write(TARGET_COMMAND_REG, 0); | |
2007 | ||
2008 | /* Enable reselect interrupts */ | |
2009 | NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); | |
2010 | /* Wait for bus free to avoid nasty timeouts - FIXME timeout !*/ | |
2011 | /* NCR538_poll_politely(instance, STATUS_REG, SR_BSY, 0, 30 * HZ); */ | |
2012 | while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected) | |
2013 | barrier(); | |
2014 | return; | |
2015 | } | |
2016 | /* | |
2017 | * The SCSI data pointer is *IMPLICITLY* saved on a disconnect | |
2018 | * operation, in violation of the SCSI spec so we can safely | |
2019 | * ignore SAVE/RESTORE pointers calls. | |
2020 | * | |
2021 | * Unfortunately, some disks violate the SCSI spec and | |
2022 | * don't issue the required SAVE_POINTERS message before | |
2023 | * disconnecting, and we have to break spec to remain | |
2024 | * compatible. | |
2025 | */ | |
2026 | case SAVE_POINTERS: | |
2027 | case RESTORE_POINTERS: | |
2028 | /* Accept message by clearing ACK */ | |
2029 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
2030 | break; | |
2031 | case EXTENDED_MESSAGE: | |
2032 | /* | |
2033 | * Extended messages are sent in the following format : | |
2034 | * Byte | |
2035 | * 0 EXTENDED_MESSAGE == 1 | |
2036 | * 1 length (includes one byte for code, doesn't | |
2037 | * include first two bytes) | |
2038 | * 2 code | |
2039 | * 3..length+1 arguments | |
2040 | * | |
2041 | * Start the extended message buffer with the EXTENDED_MESSAGE | |
1abfd370 | 2042 | * byte, since spi_print_msg() wants the whole thing. |
1da177e4 LT |
2043 | */ |
2044 | extended_msg[0] = EXTENDED_MESSAGE; | |
2045 | /* Accept first byte by clearing ACK */ | |
2046 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
52a6a1cb | 2047 | dprintk(NDEBUG_EXTENDED, "scsi%d : receiving extended message\n", instance->host_no); |
1da177e4 LT |
2048 | |
2049 | len = 2; | |
2050 | data = extended_msg + 1; | |
2051 | phase = PHASE_MSGIN; | |
2052 | NCR5380_transfer_pio(instance, &phase, &len, &data); | |
2053 | ||
52a6a1cb | 2054 | dprintk(NDEBUG_EXTENDED, "scsi%d : length=%d, code=0x%02x\n", instance->host_no, (int) extended_msg[1], (int) extended_msg[2]); |
1da177e4 LT |
2055 | |
2056 | if (!len && extended_msg[1] <= (sizeof(extended_msg) - 1)) { | |
2057 | /* Accept third byte by clearing ACK */ | |
2058 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
2059 | len = extended_msg[1] - 1; | |
2060 | data = extended_msg + 3; | |
2061 | phase = PHASE_MSGIN; | |
2062 | ||
2063 | NCR5380_transfer_pio(instance, &phase, &len, &data); | |
52a6a1cb | 2064 | dprintk(NDEBUG_EXTENDED, "scsi%d : message received, residual %d\n", instance->host_no, len); |
1da177e4 LT |
2065 | |
2066 | switch (extended_msg[2]) { | |
2067 | case EXTENDED_SDTR: | |
2068 | case EXTENDED_WDTR: | |
2069 | case EXTENDED_MODIFY_DATA_POINTER: | |
2070 | case EXTENDED_EXTENDED_IDENTIFY: | |
2071 | tmp = 0; | |
2072 | } | |
2073 | } else if (len) { | |
2074 | printk("scsi%d: error receiving extended message\n", instance->host_no); | |
2075 | tmp = 0; | |
2076 | } else { | |
2077 | printk("scsi%d: extended message code %02x length %d is too long\n", instance->host_no, extended_msg[2], extended_msg[1]); | |
2078 | tmp = 0; | |
2079 | } | |
2080 | /* Fall through to reject message */ | |
2081 | ||
2082 | /* | |
2083 | * If we get something weird that we aren't expecting, | |
2084 | * reject it. | |
2085 | */ | |
2086 | default: | |
2087 | if (!tmp) { | |
2088 | printk("scsi%d: rejecting message ", instance->host_no); | |
1abfd370 | 2089 | spi_print_msg(extended_msg); |
1da177e4 LT |
2090 | printk("\n"); |
2091 | } else if (tmp != EXTENDED_MESSAGE) | |
017560fc JG |
2092 | scmd_printk(KERN_INFO, cmd, |
2093 | "rejecting unknown message %02x\n",tmp); | |
1da177e4 | 2094 | else |
017560fc JG |
2095 | scmd_printk(KERN_INFO, cmd, |
2096 | "rejecting unknown extended message code %02x, length %d\n", extended_msg[1], extended_msg[0]); | |
1da177e4 LT |
2097 | |
2098 | msgout = MESSAGE_REJECT; | |
2099 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); | |
2100 | break; | |
2101 | } /* switch (tmp) */ | |
2102 | break; | |
2103 | case PHASE_MSGOUT: | |
2104 | len = 1; | |
2105 | data = &msgout; | |
2106 | hostdata->last_message = msgout; | |
2107 | NCR5380_transfer_pio(instance, &phase, &len, &data); | |
2108 | if (msgout == ABORT) { | |
9cb78c16 | 2109 | hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF)); |
1da177e4 LT |
2110 | hostdata->connected = NULL; |
2111 | cmd->result = DID_ERROR << 16; | |
1da177e4 LT |
2112 | cmd->scsi_done(cmd); |
2113 | NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); | |
2114 | return; | |
2115 | } | |
2116 | msgout = NOP; | |
2117 | break; | |
2118 | case PHASE_CMDOUT: | |
2119 | len = cmd->cmd_len; | |
2120 | data = cmd->cmnd; | |
2121 | /* | |
2122 | * XXX for performance reasons, on machines with a | |
2123 | * PSEUDO-DMA architecture we should probably | |
2124 | * use the dma transfer function. | |
2125 | */ | |
2126 | NCR5380_transfer_pio(instance, &phase, &len, &data); | |
1da177e4 LT |
2127 | break; |
2128 | case PHASE_STATIN: | |
2129 | len = 1; | |
2130 | data = &tmp; | |
2131 | NCR5380_transfer_pio(instance, &phase, &len, &data); | |
2132 | cmd->SCp.Status = tmp; | |
2133 | break; | |
2134 | default: | |
2135 | printk("scsi%d : unknown phase\n", instance->host_no); | |
4dde8f7d | 2136 | NCR5380_dprint(NDEBUG_ANY, instance); |
1da177e4 | 2137 | } /* switch(phase) */ |
686f3990 FT |
2138 | } else { |
2139 | spin_unlock_irq(instance->host_lock); | |
2140 | NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ); | |
2141 | spin_lock_irq(instance->host_lock); | |
1da177e4 LT |
2142 | } |
2143 | } /* while (1) */ | |
2144 | } | |
2145 | ||
2146 | /* | |
2147 | * Function : void NCR5380_reselect (struct Scsi_Host *instance) | |
2148 | * | |
2149 | * Purpose : does reselection, initializing the instance->connected | |
710ddd0d | 2150 | * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q |
1da177e4 LT |
2151 | * nexus has been reestablished, |
2152 | * | |
2153 | * Inputs : instance - this instance of the NCR5380. | |
2154 | * | |
2155 | * Locks: io_request_lock held by caller if IRQ driven | |
2156 | */ | |
2157 | ||
2158 | static void NCR5380_reselect(struct Scsi_Host *instance) { | |
1da177e4 LT |
2159 | struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) |
2160 | instance->hostdata; | |
2161 | unsigned char target_mask; | |
2162 | unsigned char lun, phase; | |
2163 | int len; | |
2164 | unsigned char msg[3]; | |
2165 | unsigned char *data; | |
710ddd0d | 2166 | struct scsi_cmnd *tmp = NULL, *prev; |
1da177e4 | 2167 | int abort = 0; |
1da177e4 LT |
2168 | |
2169 | /* | |
2170 | * Disable arbitration, etc. since the host adapter obviously | |
2171 | * lost, and tell an interrupted NCR5380_select() to restart. | |
2172 | */ | |
2173 | ||
2174 | NCR5380_write(MODE_REG, MR_BASE); | |
1da177e4 LT |
2175 | |
2176 | target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask); | |
52a6a1cb | 2177 | dprintk(NDEBUG_SELECTION, "scsi%d : reselect\n", instance->host_no); |
1da177e4 LT |
2178 | |
2179 | /* | |
2180 | * At this point, we have detected that our SCSI ID is on the bus, | |
2181 | * SEL is true and BSY was false for at least one bus settle delay | |
2182 | * (400 ns). | |
2183 | * | |
2184 | * We must assert BSY ourselves, until the target drops the SEL | |
2185 | * signal. | |
2186 | */ | |
2187 | ||
2188 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY); | |
2189 | ||
2190 | /* FIXME: timeout too long, must fail to workqueue */ | |
2191 | if(NCR5380_poll_politely(instance, STATUS_REG, SR_SEL, 0, 2*HZ)<0) | |
2192 | abort = 1; | |
2193 | ||
2194 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
2195 | ||
2196 | /* | |
2197 | * Wait for target to go into MSGIN. | |
2198 | * FIXME: timeout needed and fail to work queeu | |
2199 | */ | |
2200 | ||
2201 | if(NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 2*HZ)) | |
2202 | abort = 1; | |
2203 | ||
2204 | len = 1; | |
2205 | data = msg; | |
2206 | phase = PHASE_MSGIN; | |
2207 | NCR5380_transfer_pio(instance, &phase, &len, &data); | |
2208 | ||
2209 | if (!(msg[0] & 0x80)) { | |
2210 | printk(KERN_ERR "scsi%d : expecting IDENTIFY message, got ", instance->host_no); | |
1abfd370 | 2211 | spi_print_msg(msg); |
1da177e4 LT |
2212 | abort = 1; |
2213 | } else { | |
2214 | /* Accept message by clearing ACK */ | |
2215 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
2216 | lun = (msg[0] & 0x07); | |
2217 | ||
2218 | /* | |
2219 | * We need to add code for SCSI-II to track which devices have | |
2220 | * I_T_L_Q nexuses established, and which have simple I_T_L | |
2221 | * nexuses so we can chose to do additional data transfer. | |
2222 | */ | |
2223 | ||
2224 | /* | |
2225 | * Find the command corresponding to the I_T_L or I_T_L_Q nexus we | |
2226 | * just reestablished, and remove it from the disconnected queue. | |
2227 | */ | |
2228 | ||
2229 | ||
710ddd0d | 2230 | for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble) |
9cb78c16 | 2231 | if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun) |
1da177e4 LT |
2232 | ) { |
2233 | if (prev) { | |
2234 | REMOVE(prev, prev->host_scribble, tmp, tmp->host_scribble); | |
2235 | prev->host_scribble = tmp->host_scribble; | |
2236 | } else { | |
2237 | REMOVE(-1, hostdata->disconnected_queue, tmp, tmp->host_scribble); | |
710ddd0d | 2238 | hostdata->disconnected_queue = (struct scsi_cmnd *) tmp->host_scribble; |
1da177e4 LT |
2239 | } |
2240 | tmp->host_scribble = NULL; | |
2241 | break; | |
2242 | } | |
2243 | if (!tmp) { | |
2244 | printk(KERN_ERR "scsi%d : warning : target bitmask %02x lun %d not in disconnect_queue.\n", instance->host_no, target_mask, lun); | |
2245 | /* | |
2246 | * Since we have an established nexus that we can't do anything with, | |
2247 | * we must abort it. | |
2248 | */ | |
2249 | abort = 1; | |
2250 | } | |
2251 | } | |
2252 | ||
2253 | if (abort) { | |
2254 | do_abort(instance); | |
2255 | } else { | |
2256 | hostdata->connected = tmp; | |
9cb78c16 | 2257 | dprintk(NDEBUG_RESELECTION, "scsi%d : nexus established, target = %d, lun = %llu, tag = %d\n", instance->host_no, tmp->device->id, tmp->device->lun, tmp->tag); |
1da177e4 LT |
2258 | } |
2259 | } | |
2260 | ||
2261 | /* | |
2262 | * Function : void NCR5380_dma_complete (struct Scsi_Host *instance) | |
2263 | * | |
2264 | * Purpose : called by interrupt handler when DMA finishes or a phase | |
2265 | * mismatch occurs (which would finish the DMA transfer). | |
2266 | * | |
2267 | * Inputs : instance - this instance of the NCR5380. | |
2268 | * | |
710ddd0d | 2269 | * Returns : pointer to the scsi_cmnd structure for which the I_T_L |
1da177e4 LT |
2270 | * nexus has been reestablished, on failure NULL is returned. |
2271 | */ | |
2272 | ||
2273 | #ifdef REAL_DMA | |
2274 | static void NCR5380_dma_complete(NCR5380_instance * instance) { | |
f8343685 | 2275 | struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; |
1da177e4 | 2276 | int transferred; |
1da177e4 LT |
2277 | |
2278 | /* | |
2279 | * XXX this might not be right. | |
2280 | * | |
2281 | * Wait for final byte to transfer, ie wait for ACK to go false. | |
2282 | * | |
2283 | * We should use the Last Byte Sent bit, unfortunately this is | |
2284 | * not available on the 5380/5381 (only the various CMOS chips) | |
2285 | * | |
2286 | * FIXME: timeout, and need to handle long timeout/irq case | |
2287 | */ | |
2288 | ||
2289 | NCR5380_poll_politely(instance, BUS_AND_STATUS_REG, BASR_ACK, 0, 5*HZ); | |
2290 | ||
2291 | NCR5380_write(MODE_REG, MR_BASE); | |
2292 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); | |
2293 | ||
2294 | /* | |
2295 | * The only places we should see a phase mismatch and have to send | |
2296 | * data from the same set of pointers will be the data transfer | |
2297 | * phases. So, residual, requested length are only important here. | |
2298 | */ | |
2299 | ||
2300 | if (!(hostdata->connected->SCp.phase & SR_CD)) { | |
2301 | transferred = instance->dmalen - NCR5380_dma_residual(); | |
2302 | hostdata->connected->SCp.this_residual -= transferred; | |
2303 | hostdata->connected->SCp.ptr += transferred; | |
2304 | } | |
2305 | } | |
2306 | #endif /* def REAL_DMA */ | |
2307 | ||
2308 | /* | |
710ddd0d | 2309 | * Function : int NCR5380_abort (struct scsi_cmnd *cmd) |
1da177e4 LT |
2310 | * |
2311 | * Purpose : abort a command | |
2312 | * | |
710ddd0d | 2313 | * Inputs : cmd - the scsi_cmnd to abort, code - code to set the |
b6c92b7e | 2314 | * host byte of the result field to, if zero DID_ABORTED is |
1da177e4 LT |
2315 | * used. |
2316 | * | |
b6c92b7e | 2317 | * Returns : SUCCESS - success, FAILED on failure. |
1da177e4 | 2318 | * |
b6c92b7e HR |
2319 | * XXX - there is no way to abort the command that is currently |
2320 | * connected, you have to wait for it to complete. If this is | |
1da177e4 LT |
2321 | * a problem, we could implement longjmp() / setjmp(), setjmp() |
2322 | * called where the loop started in NCR5380_main(). | |
2323 | * | |
2324 | * Locks: host lock taken by caller | |
2325 | */ | |
2326 | ||
710ddd0d FT |
2327 | static int NCR5380_abort(struct scsi_cmnd *cmd) |
2328 | { | |
1da177e4 LT |
2329 | struct Scsi_Host *instance = cmd->device->host; |
2330 | struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; | |
710ddd0d | 2331 | struct scsi_cmnd *tmp, **prev; |
1fa6b5fb HR |
2332 | |
2333 | scmd_printk(KERN_WARNING, cmd, "aborting command\n"); | |
1da177e4 | 2334 | |
9dafbd93 | 2335 | spin_lock_irq(instance->host_lock); |
1da177e4 LT |
2336 | NCR5380_print_status(instance); |
2337 | ||
52a6a1cb FT |
2338 | dprintk(NDEBUG_ABORT, "scsi%d : abort called\n", instance->host_no); |
2339 | dprintk(NDEBUG_ABORT, " basr 0x%X, sr 0x%X\n", NCR5380_read(BUS_AND_STATUS_REG), NCR5380_read(STATUS_REG)); | |
1da177e4 LT |
2340 | |
2341 | #if 0 | |
2342 | /* | |
2343 | * Case 1 : If the command is the currently executing command, | |
2344 | * we'll set the aborted flag and return control so that | |
2345 | * information transfer routine can exit cleanly. | |
2346 | */ | |
2347 | ||
2348 | if (hostdata->connected == cmd) { | |
52a6a1cb | 2349 | dprintk(NDEBUG_ABORT, "scsi%d : aborting connected command\n", instance->host_no); |
1da177e4 LT |
2350 | /* |
2351 | * We should perform BSY checking, and make sure we haven't slipped | |
2352 | * into BUS FREE. | |
2353 | */ | |
2354 | ||
2355 | NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_ATN); | |
2356 | /* | |
2357 | * Since we can't change phases until we've completed the current | |
2358 | * handshake, we have to source or sink a byte of data if the current | |
2359 | * phase is not MSGOUT. | |
2360 | */ | |
2361 | ||
2362 | /* | |
2363 | * Return control to the executing NCR drive so we can clear the | |
2364 | * aborted flag and get back into our main loop. | |
2365 | */ | |
2366 | ||
b6c92b7e | 2367 | return SUCCESS; |
1da177e4 LT |
2368 | } |
2369 | #endif | |
2370 | ||
2371 | /* | |
2372 | * Case 2 : If the command hasn't been issued yet, we simply remove it | |
2373 | * from the issue queue. | |
2374 | */ | |
2375 | ||
52a6a1cb | 2376 | dprintk(NDEBUG_ABORT, "scsi%d : abort going into loop.\n", instance->host_no); |
710ddd0d | 2377 | for (prev = (struct scsi_cmnd **) &(hostdata->issue_queue), tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble) |
1da177e4 LT |
2378 | if (cmd == tmp) { |
2379 | REMOVE(5, *prev, tmp, tmp->host_scribble); | |
710ddd0d | 2380 | (*prev) = (struct scsi_cmnd *) tmp->host_scribble; |
1da177e4 | 2381 | tmp->host_scribble = NULL; |
9dafbd93 | 2382 | spin_unlock_irq(instance->host_lock); |
1da177e4 | 2383 | tmp->result = DID_ABORT << 16; |
52a6a1cb | 2384 | dprintk(NDEBUG_ABORT, "scsi%d : abort removed command from issue queue.\n", instance->host_no); |
cce99c69 | 2385 | tmp->scsi_done(tmp); |
1da177e4 LT |
2386 | return SUCCESS; |
2387 | } | |
2388 | #if (NDEBUG & NDEBUG_ABORT) | |
2389 | /* KLL */ | |
2390 | else if (prev == tmp) | |
2391 | printk(KERN_ERR "scsi%d : LOOP\n", instance->host_no); | |
2392 | #endif | |
2393 | ||
2394 | /* | |
2395 | * Case 3 : If any commands are connected, we're going to fail the abort | |
2396 | * and let the high level SCSI driver retry at a later time or | |
2397 | * issue a reset. | |
2398 | * | |
2399 | * Timeouts, and therefore aborted commands, will be highly unlikely | |
2400 | * and handling them cleanly in this situation would make the common | |
2401 | * case of noresets less efficient, and would pollute our code. So, | |
2402 | * we fail. | |
2403 | */ | |
2404 | ||
2405 | if (hostdata->connected) { | |
9dafbd93 | 2406 | spin_unlock_irq(instance->host_lock); |
52a6a1cb | 2407 | dprintk(NDEBUG_ABORT, "scsi%d : abort failed, command connected.\n", instance->host_no); |
1da177e4 LT |
2408 | return FAILED; |
2409 | } | |
2410 | /* | |
2411 | * Case 4: If the command is currently disconnected from the bus, and | |
2412 | * there are no connected commands, we reconnect the I_T_L or | |
2413 | * I_T_L_Q nexus associated with it, go into message out, and send | |
2414 | * an abort message. | |
2415 | * | |
2416 | * This case is especially ugly. In order to reestablish the nexus, we | |
2417 | * need to call NCR5380_select(). The easiest way to implement this | |
2418 | * function was to abort if the bus was busy, and let the interrupt | |
2419 | * handler triggered on the SEL for reselect take care of lost arbitrations | |
2420 | * where necessary, meaning interrupts need to be enabled. | |
2421 | * | |
2422 | * When interrupts are enabled, the queues may change - so we | |
2423 | * can't remove it from the disconnected queue before selecting it | |
2424 | * because that could cause a failure in hashing the nexus if that | |
2425 | * device reselected. | |
2426 | * | |
2427 | * Since the queues may change, we can't use the pointers from when we | |
2428 | * first locate it. | |
2429 | * | |
2430 | * So, we must first locate the command, and if NCR5380_select() | |
2431 | * succeeds, then issue the abort, relocate the command and remove | |
2432 | * it from the disconnected queue. | |
2433 | */ | |
2434 | ||
710ddd0d | 2435 | for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; tmp = (struct scsi_cmnd *) tmp->host_scribble) |
1da177e4 | 2436 | if (cmd == tmp) { |
52a6a1cb | 2437 | dprintk(NDEBUG_ABORT, "scsi%d : aborting disconnected command.\n", instance->host_no); |
1da177e4 | 2438 | |
9dafbd93 FT |
2439 | if (NCR5380_select(instance, cmd)) { |
2440 | spin_unlock_irq(instance->host_lock); | |
1da177e4 | 2441 | return FAILED; |
9dafbd93 | 2442 | } |
52a6a1cb | 2443 | dprintk(NDEBUG_ABORT, "scsi%d : nexus reestablished.\n", instance->host_no); |
1da177e4 LT |
2444 | |
2445 | do_abort(instance); | |
2446 | ||
710ddd0d | 2447 | for (prev = (struct scsi_cmnd **) &(hostdata->disconnected_queue), tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble) |
1da177e4 LT |
2448 | if (cmd == tmp) { |
2449 | REMOVE(5, *prev, tmp, tmp->host_scribble); | |
710ddd0d | 2450 | *prev = (struct scsi_cmnd *) tmp->host_scribble; |
1da177e4 | 2451 | tmp->host_scribble = NULL; |
9dafbd93 | 2452 | spin_unlock_irq(instance->host_lock); |
1da177e4 | 2453 | tmp->result = DID_ABORT << 16; |
cce99c69 | 2454 | tmp->scsi_done(tmp); |
1da177e4 LT |
2455 | return SUCCESS; |
2456 | } | |
2457 | } | |
2458 | /* | |
2459 | * Case 5 : If we reached this point, the command was not found in any of | |
2460 | * the queues. | |
2461 | * | |
2462 | * We probably reached this point because of an unlikely race condition | |
2463 | * between the command completing successfully and the abortion code, | |
2464 | * so we won't panic, but we will notify the user in case something really | |
2465 | * broke. | |
2466 | */ | |
9dafbd93 | 2467 | spin_unlock_irq(instance->host_lock); |
1da177e4 LT |
2468 | printk(KERN_WARNING "scsi%d : warning : SCSI command probably completed successfully\n" |
2469 | " before abortion\n", instance->host_no); | |
2470 | return FAILED; | |
2471 | } | |
2472 | ||
2473 | ||
3be1b3ea FT |
2474 | /** |
2475 | * NCR5380_bus_reset - reset the SCSI bus | |
2476 | * @cmd: SCSI command undergoing EH | |
1da177e4 | 2477 | * |
3be1b3ea | 2478 | * Returns SUCCESS |
1da177e4 LT |
2479 | */ |
2480 | ||
710ddd0d | 2481 | static int NCR5380_bus_reset(struct scsi_cmnd *cmd) |
68b3aa7c JG |
2482 | { |
2483 | struct Scsi_Host *instance = cmd->device->host; | |
2484 | ||
3be1b3ea FT |
2485 | spin_lock_irq(instance->host_lock); |
2486 | ||
2487 | #if (NDEBUG & NDEBUG_ANY) | |
2488 | scmd_printk(KERN_INFO, cmd, "performing bus reset\n"); | |
68b3aa7c | 2489 | NCR5380_print_status(instance); |
3be1b3ea | 2490 | #endif |
68b3aa7c | 2491 | |
68b3aa7c | 2492 | do_reset(instance); |
3be1b3ea | 2493 | |
68b3aa7c | 2494 | spin_unlock_irq(instance->host_lock); |
1da177e4 | 2495 | |
1da177e4 LT |
2496 | return SUCCESS; |
2497 | } |