xhci: Add SuperSpeedPlus high bandwidth isoc support to xhci endpoints
[deliverable/linux.git] / drivers / scsi / aic7xxx / aic7xxx_proc.c
CommitLineData
1da177e4
LT
1/*
2 * Copyright (c) 2000-2001 Adaptec Inc.
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions, and the following disclaimer,
10 * without modification.
11 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
12 * substantially similar to the "NO WARRANTY" disclaimer below
13 * ("Disclaimer") and any redistribution must be conditioned upon
14 * including a substantially similar Disclaimer requirement for further
15 * binary redistribution.
16 * 3. Neither the names of the above-listed copyright holders nor the names
17 * of any contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
23 *
24 * NO WARRANTY
25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
26 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
27 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
28 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
29 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
33 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
34 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35 * POSSIBILITY OF SUCH DAMAGES.
36 *
37 * String handling code courtesy of Gerard Roudier's <groudier@club-internet.fr>
38 * sym driver.
39 *
40 * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_proc.c#29 $
41 */
42#include "aic7xxx_osm.h"
43#include "aic7xxx_inline.h"
44#include "aic7xxx_93cx6.h"
45
1da177e4 46static void ahc_dump_target_state(struct ahc_softc *ahc,
6b3a8bbf 47 struct seq_file *m,
1da177e4
LT
48 u_int our_id, char channel,
49 u_int target_id, u_int target_offset);
6b3a8bbf 50static void ahc_dump_device_state(struct seq_file *m,
b1abb4d6 51 struct scsi_device *dev);
1da177e4 52
1ff92730
CH
53/*
54 * Table of syncrates that don't follow the "divisible by 4"
55 * rule. This table will be expanded in future SCSI specs.
56 */
980b306a 57static const struct {
1ff92730
CH
58 u_int period_factor;
59 u_int period; /* in 100ths of ns */
60} scsi_syncrates[] = {
61 { 0x08, 625 }, /* FAST-160 */
62 { 0x09, 1250 }, /* FAST-80 */
63 { 0x0a, 2500 }, /* FAST-40 40MHz */
64 { 0x0b, 3030 }, /* FAST-40 33MHz */
65 { 0x0c, 5000 } /* FAST-20 */
66};
67
68/*
69 * Return the frequency in kHz corresponding to the given
70 * sync period factor.
71 */
72static u_int
73ahc_calc_syncsrate(u_int period_factor)
74{
75 int i;
1ff92730 76
1ff92730 77 /* See if the period is in the "exception" table */
6391a113 78 for (i = 0; i < ARRAY_SIZE(scsi_syncrates); i++) {
1ff92730
CH
79
80 if (period_factor == scsi_syncrates[i].period_factor) {
81 /* Period in kHz */
82 return (100000000 / scsi_syncrates[i].period);
83 }
84 }
85
86 /*
87 * Wasn't in the table, so use the standard
88 * 4 times conversion.
89 */
90 return (10000000 / (period_factor * 4 * 10));
91}
92
d1d7b19d 93static void
6b3a8bbf 94ahc_format_transinfo(struct seq_file *m, struct ahc_transinfo *tinfo)
1da177e4
LT
95{
96 u_int speed;
97 u_int freq;
98 u_int mb;
99
100 speed = 3300;
101 freq = 0;
102 if (tinfo->offset != 0) {
1ff92730 103 freq = ahc_calc_syncsrate(tinfo->period);
1da177e4
LT
104 speed = freq;
105 }
106 speed *= (0x01 << tinfo->width);
107 mb = speed / 1000;
108 if (mb > 0)
6b3a8bbf 109 seq_printf(m, "%d.%03dMB/s transfers", mb, speed % 1000);
1da177e4 110 else
6b3a8bbf 111 seq_printf(m, "%dKB/s transfers", speed);
1da177e4
LT
112
113 if (freq != 0) {
6b3a8bbf 114 seq_printf(m, " (%d.%03dMHz%s, offset %d",
1da177e4
LT
115 freq / 1000, freq % 1000,
116 (tinfo->ppr_options & MSG_EXT_PPR_DT_REQ) != 0
117 ? " DT" : "", tinfo->offset);
118 }
119
120 if (tinfo->width > 0) {
121 if (freq != 0) {
91c40f24 122 seq_puts(m, ", ");
1da177e4 123 } else {
91c40f24 124 seq_puts(m, " (");
1da177e4 125 }
6b3a8bbf 126 seq_printf(m, "%dbit)", 8 * (0x01 << tinfo->width));
1da177e4 127 } else if (freq != 0) {
f50332ff 128 seq_putc(m, ')');
1da177e4 129 }
f50332ff 130 seq_putc(m, '\n');
1da177e4
LT
131}
132
133static void
6b3a8bbf 134ahc_dump_target_state(struct ahc_softc *ahc, struct seq_file *m,
1da177e4
LT
135 u_int our_id, char channel, u_int target_id,
136 u_int target_offset)
137{
b1abb4d6 138 struct scsi_target *starget;
1da177e4
LT
139 struct ahc_initiator_tinfo *tinfo;
140 struct ahc_tmode_tstate *tstate;
141 int lun;
142
143 tinfo = ahc_fetch_transinfo(ahc, channel, our_id,
144 target_id, &tstate);
145 if ((ahc->features & AHC_TWIN) != 0)
6b3a8bbf
AV
146 seq_printf(m, "Channel %c ", channel);
147 seq_printf(m, "Target %d Negotiation Settings\n", target_id);
91c40f24 148 seq_puts(m, "\tUser: ");
6b3a8bbf 149 ahc_format_transinfo(m, &tinfo->user);
b1abb4d6 150 starget = ahc->platform_data->starget[target_offset];
c0df28cf 151 if (!starget)
1da177e4
LT
152 return;
153
91c40f24 154 seq_puts(m, "\tGoal: ");
6b3a8bbf 155 ahc_format_transinfo(m, &tinfo->goal);
91c40f24 156 seq_puts(m, "\tCurr: ");
6b3a8bbf 157 ahc_format_transinfo(m, &tinfo->curr);
1da177e4
LT
158
159 for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
b1abb4d6 160 struct scsi_device *sdev;
1da177e4 161
9080063f 162 sdev = scsi_device_lookup_by_target(starget, lun);
1da177e4 163
b1abb4d6 164 if (sdev == NULL)
1da177e4
LT
165 continue;
166
6b3a8bbf 167 ahc_dump_device_state(m, sdev);
1da177e4
LT
168 }
169}
170
171static void
6b3a8bbf 172ahc_dump_device_state(struct seq_file *m, struct scsi_device *sdev)
1da177e4 173{
b1abb4d6
JB
174 struct ahc_linux_device *dev = scsi_transport_device_data(sdev);
175
6b3a8bbf 176 seq_printf(m, "\tChannel %c Target %d Lun %d Settings\n",
b1abb4d6 177 sdev->sdev_target->channel + 'A',
9cb78c16 178 sdev->sdev_target->id, (u8)sdev->lun);
1da177e4 179
6b3a8bbf
AV
180 seq_printf(m, "\t\tCommands Queued %ld\n", dev->commands_issued);
181 seq_printf(m, "\t\tCommands Active %d\n", dev->active);
182 seq_printf(m, "\t\tCommand Openings %d\n", dev->openings);
183 seq_printf(m, "\t\tMax Tagged Openings %d\n", dev->maxtags);
184 seq_printf(m, "\t\tDevice Queue Frozen Count %d\n", dev->qfrozen);
1da177e4
LT
185}
186
6b3a8bbf
AV
187int
188ahc_proc_write_seeprom(struct Scsi_Host *shost, char *buffer, int length)
1da177e4 189{
6b3a8bbf 190 struct ahc_softc *ahc = *(struct ahc_softc **)shost->hostdata;
1da177e4
LT
191 struct seeprom_descriptor sd;
192 int have_seeprom;
193 u_long s;
194 int paused;
195 int written;
196
197 /* Default to failure. */
198 written = -EINVAL;
199 ahc_lock(ahc, &s);
200 paused = ahc_is_paused(ahc);
201 if (!paused)
202 ahc_pause(ahc);
203
204 if (length != sizeof(struct seeprom_config)) {
48813cf9 205 printk("ahc_proc_write_seeprom: incorrect buffer size\n");
1da177e4
LT
206 goto done;
207 }
208
209 have_seeprom = ahc_verify_cksum((struct seeprom_config*)buffer);
210 if (have_seeprom == 0) {
48813cf9 211 printk("ahc_proc_write_seeprom: cksum verification failed\n");
1da177e4
LT
212 goto done;
213 }
214
215 sd.sd_ahc = ahc;
216#if AHC_PCI_CONFIG > 0
217 if ((ahc->chip & AHC_PCI) != 0) {
218 sd.sd_control_offset = SEECTL;
219 sd.sd_status_offset = SEECTL;
220 sd.sd_dataout_offset = SEECTL;
221 if (ahc->flags & AHC_LARGE_SEEPROM)
222 sd.sd_chip = C56_66;
223 else
224 sd.sd_chip = C46;
225 sd.sd_MS = SEEMS;
226 sd.sd_RDY = SEERDY;
227 sd.sd_CS = SEECS;
228 sd.sd_CK = SEECK;
229 sd.sd_DO = SEEDO;
230 sd.sd_DI = SEEDI;
231 have_seeprom = ahc_acquire_seeprom(ahc, &sd);
232 } else
233#endif
234 if ((ahc->chip & AHC_VL) != 0) {
235 sd.sd_control_offset = SEECTL_2840;
236 sd.sd_status_offset = STATUS_2840;
237 sd.sd_dataout_offset = STATUS_2840;
238 sd.sd_chip = C46;
239 sd.sd_MS = 0;
240 sd.sd_RDY = EEPROM_TF;
241 sd.sd_CS = CS_2840;
242 sd.sd_CK = CK_2840;
243 sd.sd_DO = DO_2840;
244 sd.sd_DI = DI_2840;
245 have_seeprom = TRUE;
246 } else {
48813cf9 247 printk("ahc_proc_write_seeprom: unsupported adapter type\n");
1da177e4
LT
248 goto done;
249 }
250
251 if (!have_seeprom) {
48813cf9 252 printk("ahc_proc_write_seeprom: No Serial EEPROM\n");
1da177e4
LT
253 goto done;
254 } else {
255 u_int start_addr;
256
257 if (ahc->seep_config == NULL) {
48813cf9 258 ahc->seep_config = kmalloc(sizeof(*ahc->seep_config), GFP_ATOMIC);
1da177e4 259 if (ahc->seep_config == NULL) {
48813cf9 260 printk("aic7xxx: Unable to allocate serial "
1da177e4
LT
261 "eeprom buffer. Write failing\n");
262 goto done;
263 }
264 }
48813cf9 265 printk("aic7xxx: Writing Serial EEPROM\n");
1da177e4
LT
266 start_addr = 32 * (ahc->channel - 'A');
267 ahc_write_seeprom(&sd, (u_int16_t *)buffer, start_addr,
268 sizeof(struct seeprom_config)/2);
269 ahc_read_seeprom(&sd, (uint16_t *)ahc->seep_config,
270 start_addr, sizeof(struct seeprom_config)/2);
271#if AHC_PCI_CONFIG > 0
272 if ((ahc->chip & AHC_VL) == 0)
273 ahc_release_seeprom(&sd);
274#endif
275 written = length;
276 }
277
278done:
279 if (!paused)
280 ahc_unpause(ahc);
281 ahc_unlock(ahc, &s);
282 return (written);
283}
284
285/*
286 * Return information to handle /proc support for the driver.
287 */
288int
6b3a8bbf 289ahc_linux_show_info(struct seq_file *m, struct Scsi_Host *shost)
1da177e4 290{
3d65692a 291 struct ahc_softc *ahc = *(struct ahc_softc **)shost->hostdata;
1da177e4 292 char ahc_info[256];
1da177e4
LT
293 u_int max_targ;
294 u_int i;
1da177e4 295
6b3a8bbf 296 seq_printf(m, "Adaptec AIC7xxx driver version: %s\n",
1da177e4 297 AIC7XXX_DRIVER_VERSION);
6b3a8bbf 298 seq_printf(m, "%s\n", ahc->description);
1da177e4 299 ahc_controller_info(ahc, ahc_info);
6b3a8bbf
AV
300 seq_printf(m, "%s\n", ahc_info);
301 seq_printf(m, "Allocated SCBs: %d, SG List Length: %d\n\n",
1da177e4
LT
302 ahc->scb_data->numscbs, AHC_NSEG);
303
304
305 if (ahc->seep_config == NULL)
91c40f24 306 seq_puts(m, "No Serial EEPROM\n");
1da177e4 307 else {
91c40f24 308 seq_puts(m, "Serial EEPROM:\n");
1da177e4
LT
309 for (i = 0; i < sizeof(*ahc->seep_config)/2; i++) {
310 if (((i % 8) == 0) && (i != 0)) {
f50332ff 311 seq_putc(m, '\n');
1da177e4 312 }
6b3a8bbf 313 seq_printf(m, "0x%.4x ",
1da177e4
LT
314 ((uint16_t*)ahc->seep_config)[i]);
315 }
f50332ff 316 seq_putc(m, '\n');
1da177e4 317 }
f50332ff 318 seq_putc(m, '\n');
1da177e4 319
9080063f 320 max_targ = 16;
1da177e4 321 if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0)
9080063f 322 max_targ = 8;
1da177e4 323
9080063f 324 for (i = 0; i < max_targ; i++) {
1da177e4
LT
325 u_int our_id;
326 u_int target_id;
327 char channel;
328
329 channel = 'A';
330 our_id = ahc->our_id;
331 target_id = i;
332 if (i > 7 && (ahc->features & AHC_TWIN) != 0) {
333 channel = 'B';
334 our_id = ahc->our_id_b;
335 target_id = i % 8;
336 }
337
6b3a8bbf 338 ahc_dump_target_state(ahc, m, our_id,
1da177e4
LT
339 channel, target_id, i);
340 }
6b3a8bbf 341 return 0;
1da177e4 342}
This page took 1.433656 seconds and 5 git commands to generate.