Commit | Line | Data |
---|---|---|
655ee63c | 1 | /* |
1da177e4 LT |
2 | * ASCII values for a number of symbolic constants, printing functions, |
3 | * etc. | |
4 | * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422) | |
5 | * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002) | |
6 | * by D. Gilbert and aeb (20020609) | |
655ee63c | 7 | * Updated to SPC-4 T10/1713-D Rev 36g, D. Gilbert 20130701 |
1da177e4 LT |
8 | */ |
9 | ||
1da177e4 LT |
10 | #include <linux/blkdev.h> |
11 | #include <linux/module.h> | |
12 | #include <linux/kernel.h> | |
13 | ||
14 | #include <scsi/scsi.h> | |
beb40487 | 15 | #include <scsi/scsi_cmnd.h> |
1da177e4 LT |
16 | #include <scsi/scsi_device.h> |
17 | #include <scsi/scsi_host.h> | |
1da177e4 | 18 | #include <scsi/scsi_eh.h> |
de540a53 | 19 | #include <scsi/scsi_dbg.h> |
1da177e4 | 20 | |
1da177e4 | 21 | /* Commands with service actions that change the command name */ |
655ee63c DG |
22 | #define THIRD_PARTY_COPY_OUT 0x83 |
23 | #define THIRD_PARTY_COPY_IN 0x84 | |
1da177e4 | 24 | |
234d6778 HR |
25 | struct sa_name_list { |
26 | int opcode; | |
27 | const struct value_name_pair *arr; | |
28 | int arr_sz; | |
29 | }; | |
30 | ||
31 | struct value_name_pair { | |
32 | int value; | |
33 | const char * name; | |
34 | }; | |
1da177e4 | 35 | |
1da177e4 LT |
36 | static const char * cdb_byte0_names[] = { |
37 | /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense", | |
38 | /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL, | |
70f23fd6 | 39 | "Reassign Blocks", |
a507c6a2 | 40 | /* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL, |
655ee63c | 41 | /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry", |
a507c6a2 DG |
42 | /* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)", |
43 | "Reserve(6)", | |
44 | /* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)", | |
655ee63c | 45 | /* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic", |
1da177e4 LT |
46 | /* 1e-1f */ "Prevent/Allow Medium Removal", NULL, |
47 | /* 20-22 */ NULL, NULL, NULL, | |
48 | /* 23-28 */ "Read Format Capacities", "Set Window", | |
a507c6a2 DG |
49 | "Read Capacity(10)", NULL, NULL, "Read(10)", |
50 | /* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)", | |
51 | "Read updated block", | |
52 | /* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal", | |
655ee63c | 53 | /* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position", |
a507c6a2 | 54 | /* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)", |
655ee63c DG |
55 | "Read Defect Data(10)", |
56 | /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", | |
57 | "Read Buffer", | |
a507c6a2 DG |
58 | /* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)", |
59 | /* 40-41 */ "Change Definition", "Write Same(10)", | |
b4567ca6 DG |
60 | /* 42-48 */ "Unmap/Read sub-channel", "Read TOC/PMA/ATIP", |
61 | "Read density support", "Play audio(10)", "Get configuration", | |
655ee63c | 62 | "Play audio msf", "Sanitize/Play audio track/index", |
a507c6a2 | 63 | /* 49-4f */ "Play track relative(10)", "Get event status notification", |
1da177e4 LT |
64 | "Pause/resume", "Log Select", "Log Sense", "Stop play/scan", |
65 | NULL, | |
66 | /* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info", | |
a507c6a2 DG |
67 | "Reserve track", "Send OPC info", "Mode Select(10)", |
68 | /* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue", | |
69 | "Mode Sense(10)", "Close track/session", | |
1da177e4 LT |
70 | /* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in", |
71 | "Persistent reserve out", | |
72 | /* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, | |
73 | /* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, | |
74 | /* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, | |
b4567ca6 DG |
75 | /* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, "Extended CDB", |
76 | "Variable length", | |
655ee63c DG |
77 | /* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", |
78 | "Third party copy out", "Third party copy in", | |
a507c6a2 | 79 | /* 85-89 */ "ATA command pass through(16)", "Access control in", |
655ee63c | 80 | "Access control out", "Read(16)", "Compare and Write", |
b4567ca6 | 81 | /* 8a-8f */ "Write(16)", "ORWrite", "Read attributes", "Write attributes", |
a507c6a2 DG |
82 | "Write and verify(16)", "Verify(16)", |
83 | /* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)", | |
84 | "Lock/unlock cache(16)", "Write same(16)", NULL, | |
1da177e4 | 85 | /* 95-99 */ NULL, NULL, NULL, NULL, NULL, |
655ee63c DG |
86 | /* 9a-9f */ NULL, NULL, NULL, "Service action bidirectional", |
87 | "Service action in(16)", "Service action out(16)", | |
a507c6a2 DG |
88 | /* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank", |
89 | "Security protocol in", "Maintenance in", "Maintenance out", | |
90 | "Move medium/play audio(12)", | |
1da177e4 LT |
91 | /* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)", |
92 | "Play track relative(12)", | |
93 | /* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance", | |
94 | "Read DVD structure", "Write and verify(12)", | |
95 | /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)", | |
96 | /* b2-b4 */ "Search data low(12)", "Set limits(12)", | |
97 | "Read element status attached", | |
a507c6a2 | 98 | /* b5-b6 */ "Security protocol out", "Send volume tag, set streaming", |
1da177e4 LT |
99 | /* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf", |
100 | /* ba-bc */ "Redundancy group (in), Scan", | |
a507c6a2 DG |
101 | "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd", |
102 | /* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd", | |
103 | "Volume set (out), Send DVD structure", | |
1da177e4 LT |
104 | }; |
105 | ||
1da177e4 | 106 | static const struct value_name_pair maint_in_arr[] = { |
b4567ca6 | 107 | {0x5, "Report identifying information"}, |
1da177e4 LT |
108 | {0xa, "Report target port groups"}, |
109 | {0xb, "Report aliases"}, | |
110 | {0xc, "Report supported operation codes"}, | |
111 | {0xd, "Report supported task management functions"}, | |
112 | {0xe, "Report priority"}, | |
a507c6a2 | 113 | {0xf, "Report timestamp"}, |
b4567ca6 | 114 | {0x10, "Management protocol in"}, |
1da177e4 | 115 | }; |
6391a113 | 116 | #define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr) |
1da177e4 LT |
117 | |
118 | static const struct value_name_pair maint_out_arr[] = { | |
b4567ca6 | 119 | {0x6, "Set identifying information"}, |
1da177e4 LT |
120 | {0xa, "Set target port groups"}, |
121 | {0xb, "Change aliases"}, | |
655ee63c | 122 | {0xc, "Remove I_T nexus"}, |
1da177e4 | 123 | {0xe, "Set priority"}, |
b4567ca6 DG |
124 | {0xf, "Set timestamp"}, |
125 | {0x10, "Management protocol out"}, | |
1da177e4 | 126 | }; |
6391a113 | 127 | #define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr) |
1da177e4 LT |
128 | |
129 | static const struct value_name_pair serv_in12_arr[] = { | |
130 | {0x1, "Read media serial number"}, | |
131 | }; | |
6391a113 | 132 | #define SERV_IN12_SZ ARRAY_SIZE(serv_in12_arr) |
1da177e4 LT |
133 | |
134 | static const struct value_name_pair serv_out12_arr[] = { | |
135 | {-1, "dummy entry"}, | |
136 | }; | |
6391a113 | 137 | #define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr) |
1da177e4 | 138 | |
655ee63c DG |
139 | static const struct value_name_pair serv_bidi_arr[] = { |
140 | {-1, "dummy entry"}, | |
141 | }; | |
142 | #define SERV_BIDI_SZ ARRAY_SIZE(serv_bidi_arr) | |
143 | ||
1da177e4 LT |
144 | static const struct value_name_pair serv_in16_arr[] = { |
145 | {0x10, "Read capacity(16)"}, | |
146 | {0x11, "Read long(16)"}, | |
f57e4502 | 147 | {0x12, "Get LBA status"}, |
655ee63c | 148 | {0x13, "Report referrals"}, |
1da177e4 | 149 | }; |
6391a113 | 150 | #define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr) |
1da177e4 LT |
151 | |
152 | static const struct value_name_pair serv_out16_arr[] = { | |
153 | {0x11, "Write long(16)"}, | |
154 | {0x1f, "Notify data transfer device(16)"}, | |
155 | }; | |
6391a113 | 156 | #define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr) |
1da177e4 | 157 | |
655ee63c DG |
158 | static const struct value_name_pair pr_in_arr[] = { |
159 | {0x0, "Persistent reserve in, read keys"}, | |
160 | {0x1, "Persistent reserve in, read reservation"}, | |
161 | {0x2, "Persistent reserve in, report capabilities"}, | |
162 | {0x3, "Persistent reserve in, read full status"}, | |
163 | }; | |
164 | #define PR_IN_SZ ARRAY_SIZE(pr_in_arr) | |
165 | ||
166 | static const struct value_name_pair pr_out_arr[] = { | |
167 | {0x0, "Persistent reserve out, register"}, | |
168 | {0x1, "Persistent reserve out, reserve"}, | |
169 | {0x2, "Persistent reserve out, release"}, | |
170 | {0x3, "Persistent reserve out, clear"}, | |
171 | {0x4, "Persistent reserve out, preempt"}, | |
172 | {0x5, "Persistent reserve out, preempt and abort"}, | |
173 | {0x6, "Persistent reserve out, register and ignore existing key"}, | |
174 | {0x7, "Persistent reserve out, register and move"}, | |
175 | }; | |
176 | #define PR_OUT_SZ ARRAY_SIZE(pr_out_arr) | |
177 | ||
178 | /* SPC-4 rev 34 renamed the Extended Copy opcode to Third Party Copy Out. | |
179 | LID1 (List Identifier length: 1 byte) is the Extended Copy found in SPC-2 | |
180 | and SPC-3 */ | |
181 | static const struct value_name_pair tpc_out_arr[] = { | |
182 | {0x0, "Extended copy(LID1)"}, | |
183 | {0x1, "Extended copy(LID4)"}, | |
184 | {0x10, "Populate token"}, | |
185 | {0x11, "Write using token"}, | |
186 | {0x1c, "Copy operation abort"}, | |
187 | }; | |
188 | #define TPC_OUT_SZ ARRAY_SIZE(tpc_out_arr) | |
189 | ||
190 | static const struct value_name_pair tpc_in_arr[] = { | |
191 | {0x0, "Receive copy status(LID1)"}, | |
192 | {0x1, "Receive copy data(LID1)"}, | |
193 | {0x3, "Receive copy operating parameters"}, | |
194 | {0x4, "Receive copy failure details(LID1)"}, | |
195 | {0x5, "Receive copy status(LID4)"}, | |
196 | {0x6, "Receive copy data(LID4)"}, | |
197 | {0x7, "Receive ROD token information"}, | |
198 | {0x8, "Report all ROD tokens"}, | |
199 | }; | |
200 | #define TPC_IN_SZ ARRAY_SIZE(tpc_in_arr) | |
201 | ||
202 | ||
1da177e4 LT |
203 | static const struct value_name_pair variable_length_arr[] = { |
204 | {0x1, "Rebuild(32)"}, | |
205 | {0x2, "Regenerate(32)"}, | |
206 | {0x3, "Xdread(32)"}, | |
207 | {0x4, "Xdwrite(32)"}, | |
208 | {0x5, "Xdwrite extended(32)"}, | |
209 | {0x6, "Xpwrite(32)"}, | |
210 | {0x7, "Xdwriteread(32)"}, | |
211 | {0x8, "Xdwrite extended(64)"}, | |
212 | {0x9, "Read(32)"}, | |
213 | {0xa, "Verify(32)"}, | |
214 | {0xb, "Write(32)"}, | |
215 | {0xc, "Write an verify(32)"}, | |
216 | {0xd, "Write same(32)"}, | |
217 | {0x8801, "Format OSD"}, | |
218 | {0x8802, "Create (osd)"}, | |
219 | {0x8803, "List (osd)"}, | |
220 | {0x8805, "Read (osd)"}, | |
221 | {0x8806, "Write (osd)"}, | |
222 | {0x8807, "Append (osd)"}, | |
223 | {0x8808, "Flush (osd)"}, | |
224 | {0x880a, "Remove (osd)"}, | |
225 | {0x880b, "Create partition (osd)"}, | |
226 | {0x880c, "Remove partition (osd)"}, | |
227 | {0x880e, "Get attributes (osd)"}, | |
228 | {0x880f, "Set attributes (osd)"}, | |
229 | {0x8812, "Create and write (osd)"}, | |
230 | {0x8815, "Create collection (osd)"}, | |
231 | {0x8816, "Remove collection (osd)"}, | |
232 | {0x8817, "List collection (osd)"}, | |
233 | {0x8818, "Set key (osd)"}, | |
234 | {0x8819, "Set master key (osd)"}, | |
235 | {0x881a, "Flush collection (osd)"}, | |
236 | {0x881b, "Flush partition (osd)"}, | |
237 | {0x881c, "Flush OSD"}, | |
238 | {0x8f7e, "Perform SCSI command (osd)"}, | |
239 | {0x8f7f, "Perform task management function (osd)"}, | |
240 | }; | |
6391a113 | 241 | #define VARIABLE_LENGTH_SZ ARRAY_SIZE(variable_length_arr) |
1da177e4 | 242 | |
6033f979 HR |
243 | static struct sa_name_list sa_names_arr[] = { |
244 | {VARIABLE_LENGTH_CMD, variable_length_arr, VARIABLE_LENGTH_SZ}, | |
245 | {MAINTENANCE_IN, maint_in_arr, MAINT_IN_SZ}, | |
246 | {MAINTENANCE_OUT, maint_out_arr, MAINT_OUT_SZ}, | |
247 | {PERSISTENT_RESERVE_IN, pr_in_arr, PR_IN_SZ}, | |
248 | {PERSISTENT_RESERVE_OUT, pr_out_arr, PR_OUT_SZ}, | |
249 | {SERVICE_ACTION_IN_12, serv_in12_arr, SERV_IN12_SZ}, | |
250 | {SERVICE_ACTION_OUT_12, serv_out12_arr, SERV_OUT12_SZ}, | |
251 | {SERVICE_ACTION_BIDIRECTIONAL, serv_bidi_arr, SERV_BIDI_SZ}, | |
252 | {SERVICE_ACTION_IN_16, serv_in16_arr, SERV_IN16_SZ}, | |
253 | {SERVICE_ACTION_OUT_16, serv_out16_arr, SERV_OUT16_SZ}, | |
254 | {THIRD_PARTY_COPY_IN, tpc_in_arr, TPC_IN_SZ}, | |
255 | {THIRD_PARTY_COPY_OUT, tpc_out_arr, TPC_OUT_SZ}, | |
256 | {0, NULL, 0}, | |
257 | }; | |
258 | ||
9e5ed2a5 HR |
259 | bool scsi_opcode_sa_name(int opcode, int service_action, |
260 | const char **cdb_name, const char **sa_name) | |
1da177e4 | 261 | { |
6033f979 HR |
262 | struct sa_name_list *sa_name_ptr; |
263 | const struct value_name_pair *arr = NULL; | |
264 | int arr_sz, k; | |
265 | ||
2478a736 HR |
266 | *cdb_name = NULL; |
267 | if (opcode >= VENDOR_SPECIFIC_CDB) | |
268 | return false; | |
269 | ||
270 | if (opcode < ARRAY_SIZE(cdb_byte0_names)) | |
271 | *cdb_name = cdb_byte0_names[opcode]; | |
272 | ||
6033f979 HR |
273 | for (sa_name_ptr = sa_names_arr; sa_name_ptr->arr; ++sa_name_ptr) { |
274 | if (sa_name_ptr->opcode == opcode) { | |
275 | arr = sa_name_ptr->arr; | |
276 | arr_sz = sa_name_ptr->arr_sz; | |
277 | break; | |
278 | } | |
279 | } | |
280 | if (!arr) | |
281 | return false; | |
1da177e4 LT |
282 | |
283 | for (k = 0; k < arr_sz; ++k, ++arr) { | |
284 | if (service_action == arr->value) | |
285 | break; | |
286 | } | |
6033f979 HR |
287 | if (k < arr_sz) |
288 | *sa_name = arr->name; | |
289 | ||
290 | return true; | |
1da177e4 LT |
291 | } |
292 | ||
1da177e4 LT |
293 | struct error_info { |
294 | unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */ | |
295 | const char * text; | |
296 | }; | |
297 | ||
62d42a62 MP |
298 | /* |
299 | * The canonical list of T10 Additional Sense Codes is available at: | |
4e38bea6 | 300 | * http://www.t10.org/lists/asc-num.txt [most recent: 20141221] |
62d42a62 | 301 | */ |
655ee63c | 302 | |
62d42a62 | 303 | static const struct error_info additional[] = |
1da177e4 LT |
304 | { |
305 | {0x0000, "No additional sense information"}, | |
306 | {0x0001, "Filemark detected"}, | |
307 | {0x0002, "End-of-partition/medium detected"}, | |
308 | {0x0003, "Setmark detected"}, | |
309 | {0x0004, "Beginning-of-partition/medium detected"}, | |
310 | {0x0005, "End-of-data detected"}, | |
311 | {0x0006, "I/O process terminated"}, | |
b4567ca6 | 312 | {0x0007, "Programmable early warning detected"}, |
1da177e4 LT |
313 | {0x0011, "Audio play operation in progress"}, |
314 | {0x0012, "Audio play operation paused"}, | |
315 | {0x0013, "Audio play operation successfully completed"}, | |
316 | {0x0014, "Audio play operation stopped due to error"}, | |
317 | {0x0015, "No current audio status to return"}, | |
318 | {0x0016, "Operation in progress"}, | |
319 | {0x0017, "Cleaning requested"}, | |
320 | {0x0018, "Erase operation in progress"}, | |
321 | {0x0019, "Locate operation in progress"}, | |
322 | {0x001A, "Rewind operation in progress"}, | |
323 | {0x001B, "Set capacity operation in progress"}, | |
324 | {0x001C, "Verify operation in progress"}, | |
a507c6a2 | 325 | {0x001D, "ATA pass through information available"}, |
b4567ca6 | 326 | {0x001E, "Conflicting SA creation request"}, |
655ee63c DG |
327 | {0x001F, "Logical unit transitioning to another power condition"}, |
328 | {0x0020, "Extended copy information available"}, | |
4e38bea6 | 329 | {0x0021, "Atomic command aborted due to ACA"}, |
1da177e4 LT |
330 | |
331 | {0x0100, "No index/sector signal"}, | |
332 | ||
333 | {0x0200, "No seek complete"}, | |
334 | ||
335 | {0x0300, "Peripheral device write fault"}, | |
336 | {0x0301, "No write current"}, | |
337 | {0x0302, "Excessive write errors"}, | |
338 | ||
339 | {0x0400, "Logical unit not ready, cause not reportable"}, | |
340 | {0x0401, "Logical unit is in process of becoming ready"}, | |
a507c6a2 | 341 | {0x0402, "Logical unit not ready, initializing command required"}, |
1da177e4 LT |
342 | {0x0403, "Logical unit not ready, manual intervention required"}, |
343 | {0x0404, "Logical unit not ready, format in progress"}, | |
344 | {0x0405, "Logical unit not ready, rebuild in progress"}, | |
345 | {0x0406, "Logical unit not ready, recalculation in progress"}, | |
346 | {0x0407, "Logical unit not ready, operation in progress"}, | |
347 | {0x0408, "Logical unit not ready, long write in progress"}, | |
348 | {0x0409, "Logical unit not ready, self-test in progress"}, | |
349 | {0x040A, "Logical unit not accessible, asymmetric access state " | |
350 | "transition"}, | |
351 | {0x040B, "Logical unit not accessible, target port in standby state"}, | |
352 | {0x040C, "Logical unit not accessible, target port in unavailable " | |
353 | "state"}, | |
b4567ca6 | 354 | {0x040D, "Logical unit not ready, structure check required"}, |
4e38bea6 | 355 | {0x040E, "Logical unit not ready, security session in progress"}, |
1da177e4 LT |
356 | {0x0410, "Logical unit not ready, auxiliary memory not accessible"}, |
357 | {0x0411, "Logical unit not ready, notify (enable spinup) required"}, | |
358 | {0x0412, "Logical unit not ready, offline"}, | |
b4567ca6 DG |
359 | {0x0413, "Logical unit not ready, SA creation in progress"}, |
360 | {0x0414, "Logical unit not ready, space allocation in progress"}, | |
655ee63c DG |
361 | {0x0415, "Logical unit not ready, robotics disabled"}, |
362 | {0x0416, "Logical unit not ready, configuration required"}, | |
363 | {0x0417, "Logical unit not ready, calibration required"}, | |
364 | {0x0418, "Logical unit not ready, a door is open"}, | |
365 | {0x0419, "Logical unit not ready, operating in sequential mode"}, | |
366 | {0x041A, "Logical unit not ready, start stop unit command in " | |
367 | "progress"}, | |
368 | {0x041B, "Logical unit not ready, sanitize in progress"}, | |
369 | {0x041C, "Logical unit not ready, additional power use not yet " | |
370 | "granted"}, | |
371 | {0x041D, "Logical unit not ready, configuration in progress"}, | |
4e38bea6 DG |
372 | {0x041E, "Logical unit not ready, microcode activation required"}, |
373 | {0x041F, "Logical unit not ready, microcode download required"}, | |
374 | {0x0420, "Logical unit not ready, logical unit reset required"}, | |
375 | {0x0421, "Logical unit not ready, hard reset required"}, | |
376 | {0x0422, "Logical unit not ready, power cycle required"}, | |
1da177e4 LT |
377 | |
378 | {0x0500, "Logical unit does not respond to selection"}, | |
379 | ||
380 | {0x0600, "No reference position found"}, | |
381 | ||
382 | {0x0700, "Multiple peripheral devices selected"}, | |
383 | ||
384 | {0x0800, "Logical unit communication failure"}, | |
385 | {0x0801, "Logical unit communication time-out"}, | |
386 | {0x0802, "Logical unit communication parity error"}, | |
387 | {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"}, | |
388 | {0x0804, "Unreachable copy target"}, | |
389 | ||
390 | {0x0900, "Track following error"}, | |
391 | {0x0901, "Tracking servo failure"}, | |
392 | {0x0902, "Focus servo failure"}, | |
393 | {0x0903, "Spindle servo failure"}, | |
394 | {0x0904, "Head select fault"}, | |
4e38bea6 | 395 | {0x0905, "Vibration induced tracking error"}, |
1da177e4 LT |
396 | |
397 | {0x0A00, "Error log overflow"}, | |
398 | ||
399 | {0x0B00, "Warning"}, | |
400 | {0x0B01, "Warning - specified temperature exceeded"}, | |
401 | {0x0B02, "Warning - enclosure degraded"}, | |
a507c6a2 DG |
402 | {0x0B03, "Warning - background self-test failed"}, |
403 | {0x0B04, "Warning - background pre-scan detected medium error"}, | |
404 | {0x0B05, "Warning - background medium scan detected medium error"}, | |
b4567ca6 DG |
405 | {0x0B06, "Warning - non-volatile cache now volatile"}, |
406 | {0x0B07, "Warning - degraded power to non-volatile cache"}, | |
407 | {0x0B08, "Warning - power loss expected"}, | |
655ee63c | 408 | {0x0B09, "Warning - device statistics notification active"}, |
1da177e4 LT |
409 | |
410 | {0x0C00, "Write error"}, | |
411 | {0x0C01, "Write error - recovered with auto reallocation"}, | |
412 | {0x0C02, "Write error - auto reallocation failed"}, | |
413 | {0x0C03, "Write error - recommend reassignment"}, | |
414 | {0x0C04, "Compression check miscompare error"}, | |
415 | {0x0C05, "Data expansion occurred during compression"}, | |
416 | {0x0C06, "Block not compressible"}, | |
417 | {0x0C07, "Write error - recovery needed"}, | |
418 | {0x0C08, "Write error - recovery failed"}, | |
419 | {0x0C09, "Write error - loss of streaming"}, | |
420 | {0x0C0A, "Write error - padding blocks added"}, | |
421 | {0x0C0B, "Auxiliary memory write error"}, | |
422 | {0x0C0C, "Write error - unexpected unsolicited data"}, | |
423 | {0x0C0D, "Write error - not enough unsolicited data"}, | |
655ee63c | 424 | {0x0C0E, "Multiple write errors"}, |
a507c6a2 | 425 | {0x0C0F, "Defects in error window"}, |
4e38bea6 | 426 | {0x0C10, "Incomplete multiple atomic write operations"}, |
1da177e4 LT |
427 | |
428 | {0x0D00, "Error detected by third party temporary initiator"}, | |
429 | {0x0D01, "Third party device failure"}, | |
430 | {0x0D02, "Copy target device not reachable"}, | |
431 | {0x0D03, "Incorrect copy target device type"}, | |
432 | {0x0D04, "Copy target device data underrun"}, | |
433 | {0x0D05, "Copy target device data overrun"}, | |
434 | ||
435 | {0x0E00, "Invalid information unit"}, | |
436 | {0x0E01, "Information unit too short"}, | |
437 | {0x0E02, "Information unit too long"}, | |
a507c6a2 | 438 | {0x0E03, "Invalid field in command information unit"}, |
1da177e4 LT |
439 | |
440 | {0x1000, "Id CRC or ECC error"}, | |
a507c6a2 DG |
441 | {0x1001, "Logical block guard check failed"}, |
442 | {0x1002, "Logical block application tag check failed"}, | |
443 | {0x1003, "Logical block reference tag check failed"}, | |
655ee63c DG |
444 | {0x1004, "Logical block protection error on recover buffered data"}, |
445 | {0x1005, "Logical block protection method error"}, | |
1da177e4 LT |
446 | |
447 | {0x1100, "Unrecovered read error"}, | |
448 | {0x1101, "Read retries exhausted"}, | |
449 | {0x1102, "Error too long to correct"}, | |
450 | {0x1103, "Multiple read errors"}, | |
451 | {0x1104, "Unrecovered read error - auto reallocate failed"}, | |
452 | {0x1105, "L-EC uncorrectable error"}, | |
453 | {0x1106, "CIRC unrecovered error"}, | |
454 | {0x1107, "Data re-synchronization error"}, | |
455 | {0x1108, "Incomplete block read"}, | |
456 | {0x1109, "No gap found"}, | |
457 | {0x110A, "Miscorrected error"}, | |
458 | {0x110B, "Unrecovered read error - recommend reassignment"}, | |
459 | {0x110C, "Unrecovered read error - recommend rewrite the data"}, | |
460 | {0x110D, "De-compression CRC error"}, | |
461 | {0x110E, "Cannot decompress using declared algorithm"}, | |
462 | {0x110F, "Error reading UPC/EAN number"}, | |
463 | {0x1110, "Error reading ISRC number"}, | |
464 | {0x1111, "Read error - loss of streaming"}, | |
465 | {0x1112, "Auxiliary memory read error"}, | |
466 | {0x1113, "Read error - failed retransmission request"}, | |
a507c6a2 | 467 | {0x1114, "Read error - lba marked bad by application client"}, |
655ee63c | 468 | {0x1115, "Write after sanitize required"}, |
1da177e4 LT |
469 | |
470 | {0x1200, "Address mark not found for id field"}, | |
471 | ||
472 | {0x1300, "Address mark not found for data field"}, | |
473 | ||
474 | {0x1400, "Recorded entity not found"}, | |
475 | {0x1401, "Record not found"}, | |
476 | {0x1402, "Filemark or setmark not found"}, | |
477 | {0x1403, "End-of-data not found"}, | |
478 | {0x1404, "Block sequence error"}, | |
479 | {0x1405, "Record not found - recommend reassignment"}, | |
480 | {0x1406, "Record not found - data auto-reallocated"}, | |
481 | {0x1407, "Locate operation failure"}, | |
482 | ||
483 | {0x1500, "Random positioning error"}, | |
484 | {0x1501, "Mechanical positioning error"}, | |
485 | {0x1502, "Positioning error detected by read of medium"}, | |
486 | ||
487 | {0x1600, "Data synchronization mark error"}, | |
488 | {0x1601, "Data sync error - data rewritten"}, | |
489 | {0x1602, "Data sync error - recommend rewrite"}, | |
490 | {0x1603, "Data sync error - data auto-reallocated"}, | |
491 | {0x1604, "Data sync error - recommend reassignment"}, | |
492 | ||
493 | {0x1700, "Recovered data with no error correction applied"}, | |
494 | {0x1701, "Recovered data with retries"}, | |
495 | {0x1702, "Recovered data with positive head offset"}, | |
496 | {0x1703, "Recovered data with negative head offset"}, | |
497 | {0x1704, "Recovered data with retries and/or circ applied"}, | |
498 | {0x1705, "Recovered data using previous sector id"}, | |
499 | {0x1706, "Recovered data without ECC - data auto-reallocated"}, | |
500 | {0x1707, "Recovered data without ECC - recommend reassignment"}, | |
501 | {0x1708, "Recovered data without ECC - recommend rewrite"}, | |
502 | {0x1709, "Recovered data without ECC - data rewritten"}, | |
503 | ||
504 | {0x1800, "Recovered data with error correction applied"}, | |
505 | {0x1801, "Recovered data with error corr. & retries applied"}, | |
506 | {0x1802, "Recovered data - data auto-reallocated"}, | |
507 | {0x1803, "Recovered data with CIRC"}, | |
508 | {0x1804, "Recovered data with L-EC"}, | |
509 | {0x1805, "Recovered data - recommend reassignment"}, | |
510 | {0x1806, "Recovered data - recommend rewrite"}, | |
511 | {0x1807, "Recovered data with ECC - data rewritten"}, | |
512 | {0x1808, "Recovered data with linking"}, | |
513 | ||
514 | {0x1900, "Defect list error"}, | |
515 | {0x1901, "Defect list not available"}, | |
516 | {0x1902, "Defect list error in primary list"}, | |
517 | {0x1903, "Defect list error in grown list"}, | |
518 | ||
519 | {0x1A00, "Parameter list length error"}, | |
520 | ||
521 | {0x1B00, "Synchronous data transfer error"}, | |
522 | ||
523 | {0x1C00, "Defect list not found"}, | |
524 | {0x1C01, "Primary defect list not found"}, | |
525 | {0x1C02, "Grown defect list not found"}, | |
526 | ||
527 | {0x1D00, "Miscompare during verify operation"}, | |
b4567ca6 | 528 | {0x1D01, "Miscompare verify of unmapped LBA"}, |
1da177e4 LT |
529 | |
530 | {0x1E00, "Recovered id with ECC correction"}, | |
531 | ||
532 | {0x1F00, "Partial defect list transfer"}, | |
533 | ||
534 | {0x2000, "Invalid command operation code"}, | |
535 | {0x2001, "Access denied - initiator pending-enrolled"}, | |
536 | {0x2002, "Access denied - no access rights"}, | |
537 | {0x2003, "Access denied - invalid mgmt id key"}, | |
538 | {0x2004, "Illegal command while in write capable state"}, | |
539 | {0x2005, "Obsolete"}, | |
540 | {0x2006, "Illegal command while in explicit address mode"}, | |
541 | {0x2007, "Illegal command while in implicit address mode"}, | |
542 | {0x2008, "Access denied - enrollment conflict"}, | |
543 | {0x2009, "Access denied - invalid LU identifier"}, | |
544 | {0x200A, "Access denied - invalid proxy token"}, | |
545 | {0x200B, "Access denied - ACL LUN conflict"}, | |
655ee63c | 546 | {0x200C, "Illegal command when not in append-only mode"}, |
1da177e4 LT |
547 | |
548 | {0x2100, "Logical block address out of range"}, | |
549 | {0x2101, "Invalid element address"}, | |
550 | {0x2102, "Invalid address for write"}, | |
a507c6a2 | 551 | {0x2103, "Invalid write crossing layer jump"}, |
4e38bea6 DG |
552 | {0x2104, "Unaligned write command"}, |
553 | {0x2105, "Write boundary violation"}, | |
554 | {0x2106, "Attempt to read invalid data"}, | |
555 | {0x2107, "Read boundary violation"}, | |
1da177e4 LT |
556 | |
557 | {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"}, | |
558 | ||
655ee63c DG |
559 | {0x2300, "Invalid token operation, cause not reportable"}, |
560 | {0x2301, "Invalid token operation, unsupported token type"}, | |
561 | {0x2302, "Invalid token operation, remote token usage not supported"}, | |
562 | {0x2303, "Invalid token operation, remote rod token creation not " | |
563 | "supported"}, | |
564 | {0x2304, "Invalid token operation, token unknown"}, | |
565 | {0x2305, "Invalid token operation, token corrupt"}, | |
566 | {0x2306, "Invalid token operation, token revoked"}, | |
567 | {0x2307, "Invalid token operation, token expired"}, | |
568 | {0x2308, "Invalid token operation, token cancelled"}, | |
569 | {0x2309, "Invalid token operation, token deleted"}, | |
570 | {0x230A, "Invalid token operation, invalid token length"}, | |
571 | ||
1da177e4 LT |
572 | {0x2400, "Invalid field in cdb"}, |
573 | {0x2401, "CDB decryption error"}, | |
a507c6a2 DG |
574 | {0x2402, "Obsolete"}, |
575 | {0x2403, "Obsolete"}, | |
1da177e4 LT |
576 | {0x2404, "Security audit value frozen"}, |
577 | {0x2405, "Security working key frozen"}, | |
578 | {0x2406, "Nonce not unique"}, | |
579 | {0x2407, "Nonce timestamp out of range"}, | |
b4567ca6 | 580 | {0x2408, "Invalid XCDB"}, |
1da177e4 LT |
581 | |
582 | {0x2500, "Logical unit not supported"}, | |
583 | ||
584 | {0x2600, "Invalid field in parameter list"}, | |
585 | {0x2601, "Parameter not supported"}, | |
586 | {0x2602, "Parameter value invalid"}, | |
587 | {0x2603, "Threshold parameters not supported"}, | |
588 | {0x2604, "Invalid release of persistent reservation"}, | |
589 | {0x2605, "Data decryption error"}, | |
590 | {0x2606, "Too many target descriptors"}, | |
591 | {0x2607, "Unsupported target descriptor type code"}, | |
592 | {0x2608, "Too many segment descriptors"}, | |
593 | {0x2609, "Unsupported segment descriptor type code"}, | |
594 | {0x260A, "Unexpected inexact segment"}, | |
595 | {0x260B, "Inline data length exceeded"}, | |
596 | {0x260C, "Invalid operation for copy source or destination"}, | |
597 | {0x260D, "Copy segment granularity violation"}, | |
598 | {0x260E, "Invalid parameter while port is enabled"}, | |
a507c6a2 DG |
599 | {0x260F, "Invalid data-out buffer integrity check value"}, |
600 | {0x2610, "Data decryption key fail limit reached"}, | |
601 | {0x2611, "Incomplete key-associated data set"}, | |
602 | {0x2612, "Vendor specific key reference not found"}, | |
1da177e4 LT |
603 | |
604 | {0x2700, "Write protected"}, | |
605 | {0x2701, "Hardware write protected"}, | |
606 | {0x2702, "Logical unit software write protected"}, | |
607 | {0x2703, "Associated write protect"}, | |
608 | {0x2704, "Persistent write protect"}, | |
609 | {0x2705, "Permanent write protect"}, | |
610 | {0x2706, "Conditional write protect"}, | |
b4567ca6 | 611 | {0x2707, "Space allocation failed write protect"}, |
4e38bea6 | 612 | {0x2708, "Zone is read only"}, |
1da177e4 LT |
613 | |
614 | {0x2800, "Not ready to ready change, medium may have changed"}, | |
615 | {0x2801, "Import or export element accessed"}, | |
a507c6a2 | 616 | {0x2802, "Format-layer may have changed"}, |
b4567ca6 | 617 | {0x2803, "Import/export element accessed, medium changed"}, |
1da177e4 LT |
618 | |
619 | {0x2900, "Power on, reset, or bus device reset occurred"}, | |
620 | {0x2901, "Power on occurred"}, | |
621 | {0x2902, "Scsi bus reset occurred"}, | |
622 | {0x2903, "Bus device reset function occurred"}, | |
623 | {0x2904, "Device internal reset"}, | |
624 | {0x2905, "Transceiver mode changed to single-ended"}, | |
625 | {0x2906, "Transceiver mode changed to lvd"}, | |
626 | {0x2907, "I_T nexus loss occurred"}, | |
627 | ||
628 | {0x2A00, "Parameters changed"}, | |
629 | {0x2A01, "Mode parameters changed"}, | |
630 | {0x2A02, "Log parameters changed"}, | |
631 | {0x2A03, "Reservations preempted"}, | |
632 | {0x2A04, "Reservations released"}, | |
633 | {0x2A05, "Registrations preempted"}, | |
634 | {0x2A06, "Asymmetric access state changed"}, | |
635 | {0x2A07, "Implicit asymmetric access state transition failed"}, | |
636 | {0x2A08, "Priority changed"}, | |
637 | {0x2A09, "Capacity data has changed"}, | |
b4567ca6 DG |
638 | {0x2A0A, "Error history I_T nexus cleared"}, |
639 | {0x2A0B, "Error history snapshot released"}, | |
640 | {0x2A0C, "Error recovery attributes have changed"}, | |
641 | {0x2A0D, "Data encryption capabilities changed"}, | |
a507c6a2 DG |
642 | {0x2A10, "Timestamp changed"}, |
643 | {0x2A11, "Data encryption parameters changed by another i_t nexus"}, | |
644 | {0x2A12, "Data encryption parameters changed by vendor specific " | |
645 | "event"}, | |
646 | {0x2A13, "Data encryption key instance counter has changed"}, | |
b4567ca6 | 647 | {0x2A14, "SA creation capabilities data has changed"}, |
655ee63c | 648 | {0x2A15, "Medium removal prevention preempted"}, |
1da177e4 LT |
649 | |
650 | {0x2B00, "Copy cannot execute since host cannot disconnect"}, | |
651 | ||
652 | {0x2C00, "Command sequence error"}, | |
653 | {0x2C01, "Too many windows specified"}, | |
654 | {0x2C02, "Invalid combination of windows specified"}, | |
655 | {0x2C03, "Current program area is not empty"}, | |
656 | {0x2C04, "Current program area is empty"}, | |
657 | {0x2C05, "Illegal power condition request"}, | |
658 | {0x2C06, "Persistent prevent conflict"}, | |
659 | {0x2C07, "Previous busy status"}, | |
660 | {0x2C08, "Previous task set full status"}, | |
661 | {0x2C09, "Previous reservation conflict status"}, | |
662 | {0x2C0A, "Partition or collection contains user objects"}, | |
663 | {0x2C0B, "Not reserved"}, | |
655ee63c | 664 | {0x2C0C, "Orwrite generation does not match"}, |
4e38bea6 DG |
665 | {0x2C0D, "Reset write pointer not allowed"}, |
666 | {0x2C0E, "Zone is offline"}, | |
1da177e4 LT |
667 | |
668 | {0x2D00, "Overwrite error on update in place"}, | |
669 | ||
670 | {0x2E00, "Insufficient time for operation"}, | |
4e38bea6 DG |
671 | {0x2E01, "Command timeout before processing"}, |
672 | {0x2E02, "Command timeout during processing"}, | |
673 | {0x2E03, "Command timeout during processing due to error recovery"}, | |
1da177e4 LT |
674 | |
675 | {0x2F00, "Commands cleared by another initiator"}, | |
a507c6a2 | 676 | {0x2F01, "Commands cleared by power loss notification"}, |
62d42a62 | 677 | {0x2F02, "Commands cleared by device server"}, |
655ee63c | 678 | {0x2F03, "Some commands cleared by queuing layer event"}, |
1da177e4 LT |
679 | |
680 | {0x3000, "Incompatible medium installed"}, | |
681 | {0x3001, "Cannot read medium - unknown format"}, | |
682 | {0x3002, "Cannot read medium - incompatible format"}, | |
683 | {0x3003, "Cleaning cartridge installed"}, | |
684 | {0x3004, "Cannot write medium - unknown format"}, | |
685 | {0x3005, "Cannot write medium - incompatible format"}, | |
686 | {0x3006, "Cannot format medium - incompatible medium"}, | |
687 | {0x3007, "Cleaning failure"}, | |
688 | {0x3008, "Cannot write - application code mismatch"}, | |
689 | {0x3009, "Current session not fixated for append"}, | |
690 | {0x300A, "Cleaning request rejected"}, | |
a507c6a2 DG |
691 | {0x300C, "WORM medium - overwrite attempted"}, |
692 | {0x300D, "WORM medium - integrity check"}, | |
1da177e4 | 693 | {0x3010, "Medium not formatted"}, |
b4567ca6 DG |
694 | {0x3011, "Incompatible volume type"}, |
695 | {0x3012, "Incompatible volume qualifier"}, | |
655ee63c | 696 | {0x3013, "Cleaning volume expired"}, |
1da177e4 LT |
697 | |
698 | {0x3100, "Medium format corrupted"}, | |
699 | {0x3101, "Format command failed"}, | |
700 | {0x3102, "Zoned formatting failed due to spare linking"}, | |
655ee63c | 701 | {0x3103, "Sanitize command failed"}, |
1da177e4 LT |
702 | |
703 | {0x3200, "No defect spare location available"}, | |
704 | {0x3201, "Defect list update failure"}, | |
705 | ||
706 | {0x3300, "Tape length error"}, | |
707 | ||
708 | {0x3400, "Enclosure failure"}, | |
709 | ||
710 | {0x3500, "Enclosure services failure"}, | |
711 | {0x3501, "Unsupported enclosure function"}, | |
712 | {0x3502, "Enclosure services unavailable"}, | |
713 | {0x3503, "Enclosure services transfer failure"}, | |
714 | {0x3504, "Enclosure services transfer refused"}, | |
715 | {0x3505, "Enclosure services checksum error"}, | |
716 | ||
717 | {0x3600, "Ribbon, ink, or toner failure"}, | |
718 | ||
719 | {0x3700, "Rounded parameter"}, | |
720 | ||
721 | {0x3800, "Event status notification"}, | |
722 | {0x3802, "Esn - power management class event"}, | |
723 | {0x3804, "Esn - media class event"}, | |
724 | {0x3806, "Esn - device busy class event"}, | |
deb1cb63 | 725 | {0x3807, "Thin Provisioning soft threshold reached"}, |
1da177e4 LT |
726 | |
727 | {0x3900, "Saving parameters not supported"}, | |
728 | ||
729 | {0x3A00, "Medium not present"}, | |
730 | {0x3A01, "Medium not present - tray closed"}, | |
731 | {0x3A02, "Medium not present - tray open"}, | |
732 | {0x3A03, "Medium not present - loadable"}, | |
733 | {0x3A04, "Medium not present - medium auxiliary memory accessible"}, | |
734 | ||
735 | {0x3B00, "Sequential positioning error"}, | |
736 | {0x3B01, "Tape position error at beginning-of-medium"}, | |
737 | {0x3B02, "Tape position error at end-of-medium"}, | |
738 | {0x3B03, "Tape or electronic vertical forms unit not ready"}, | |
739 | {0x3B04, "Slew failure"}, | |
740 | {0x3B05, "Paper jam"}, | |
741 | {0x3B06, "Failed to sense top-of-form"}, | |
742 | {0x3B07, "Failed to sense bottom-of-form"}, | |
743 | {0x3B08, "Reposition error"}, | |
744 | {0x3B09, "Read past end of medium"}, | |
745 | {0x3B0A, "Read past beginning of medium"}, | |
746 | {0x3B0B, "Position past end of medium"}, | |
747 | {0x3B0C, "Position past beginning of medium"}, | |
748 | {0x3B0D, "Medium destination element full"}, | |
749 | {0x3B0E, "Medium source element empty"}, | |
750 | {0x3B0F, "End of medium reached"}, | |
751 | {0x3B11, "Medium magazine not accessible"}, | |
752 | {0x3B12, "Medium magazine removed"}, | |
753 | {0x3B13, "Medium magazine inserted"}, | |
754 | {0x3B14, "Medium magazine locked"}, | |
755 | {0x3B15, "Medium magazine unlocked"}, | |
756 | {0x3B16, "Mechanical positioning or changer error"}, | |
757 | {0x3B17, "Read past end of user object"}, | |
b4567ca6 DG |
758 | {0x3B18, "Element disabled"}, |
759 | {0x3B19, "Element enabled"}, | |
760 | {0x3B1A, "Data transfer device removed"}, | |
761 | {0x3B1B, "Data transfer device inserted"}, | |
655ee63c DG |
762 | {0x3B1C, "Too many logical objects on partition to support " |
763 | "operation"}, | |
1da177e4 LT |
764 | |
765 | {0x3D00, "Invalid bits in identify message"}, | |
766 | ||
767 | {0x3E00, "Logical unit has not self-configured yet"}, | |
768 | {0x3E01, "Logical unit failure"}, | |
769 | {0x3E02, "Timeout on logical unit"}, | |
770 | {0x3E03, "Logical unit failed self-test"}, | |
771 | {0x3E04, "Logical unit unable to update self-test log"}, | |
772 | ||
773 | {0x3F00, "Target operating conditions have changed"}, | |
774 | {0x3F01, "Microcode has been changed"}, | |
775 | {0x3F02, "Changed operating definition"}, | |
776 | {0x3F03, "Inquiry data has changed"}, | |
777 | {0x3F04, "Component device attached"}, | |
778 | {0x3F05, "Device identifier changed"}, | |
779 | {0x3F06, "Redundancy group created or modified"}, | |
780 | {0x3F07, "Redundancy group deleted"}, | |
781 | {0x3F08, "Spare created or modified"}, | |
782 | {0x3F09, "Spare deleted"}, | |
783 | {0x3F0A, "Volume set created or modified"}, | |
784 | {0x3F0B, "Volume set deleted"}, | |
785 | {0x3F0C, "Volume set deassigned"}, | |
786 | {0x3F0D, "Volume set reassigned"}, | |
787 | {0x3F0E, "Reported luns data has changed"}, | |
788 | {0x3F0F, "Echo buffer overwritten"}, | |
789 | {0x3F10, "Medium loadable"}, | |
790 | {0x3F11, "Medium auxiliary memory accessible"}, | |
a507c6a2 DG |
791 | {0x3F12, "iSCSI IP address added"}, |
792 | {0x3F13, "iSCSI IP address removed"}, | |
793 | {0x3F14, "iSCSI IP address changed"}, | |
655ee63c | 794 | {0x3F15, "Inspect referrals sense descriptors"}, |
4e38bea6 | 795 | {0x3F16, "Microcode has been changed without reset"}, |
1da177e4 LT |
796 | /* |
797 | * {0x40NN, "Ram failure"}, | |
798 | * {0x40NN, "Diagnostic failure on component nn"}, | |
799 | * {0x41NN, "Data path failure"}, | |
800 | * {0x42NN, "Power-on or self-test failure"}, | |
801 | */ | |
802 | {0x4300, "Message error"}, | |
803 | ||
804 | {0x4400, "Internal target failure"}, | |
655ee63c | 805 | {0x4401, "Persistent reservation information lost"}, |
a507c6a2 | 806 | {0x4471, "ATA device failed set features"}, |
1da177e4 LT |
807 | |
808 | {0x4500, "Select or reselect failure"}, | |
809 | ||
810 | {0x4600, "Unsuccessful soft reset"}, | |
811 | ||
812 | {0x4700, "Scsi parity error"}, | |
813 | {0x4701, "Data phase CRC error detected"}, | |
814 | {0x4702, "Scsi parity error detected during st data phase"}, | |
a507c6a2 | 815 | {0x4703, "Information unit iuCRC error detected"}, |
1da177e4 LT |
816 | {0x4704, "Asynchronous information protection error detected"}, |
817 | {0x4705, "Protocol service CRC error"}, | |
a507c6a2 | 818 | {0x4706, "Phy test function in progress"}, |
1da177e4 LT |
819 | {0x477f, "Some commands cleared by iSCSI Protocol event"}, |
820 | ||
821 | {0x4800, "Initiator detected error message received"}, | |
822 | ||
823 | {0x4900, "Invalid message error"}, | |
824 | ||
825 | {0x4A00, "Command phase error"}, | |
826 | ||
827 | {0x4B00, "Data phase error"}, | |
828 | {0x4B01, "Invalid target port transfer tag received"}, | |
829 | {0x4B02, "Too much write data"}, | |
830 | {0x4B03, "Ack/nak timeout"}, | |
831 | {0x4B04, "Nak received"}, | |
832 | {0x4B05, "Data offset error"}, | |
833 | {0x4B06, "Initiator response timeout"}, | |
655ee63c DG |
834 | {0x4B07, "Connection lost"}, |
835 | {0x4B08, "Data-in buffer overflow - data buffer size"}, | |
836 | {0x4B09, "Data-in buffer overflow - data buffer descriptor area"}, | |
837 | {0x4B0A, "Data-in buffer error"}, | |
838 | {0x4B0B, "Data-out buffer overflow - data buffer size"}, | |
839 | {0x4B0C, "Data-out buffer overflow - data buffer descriptor area"}, | |
840 | {0x4B0D, "Data-out buffer error"}, | |
841 | {0x4B0E, "PCIe fabric error"}, | |
842 | {0x4B0F, "PCIe completion timeout"}, | |
843 | {0x4B10, "PCIe completer abort"}, | |
844 | {0x4B11, "PCIe poisoned tlp received"}, | |
845 | {0x4B12, "PCIe eCRC check failed"}, | |
846 | {0x4B13, "PCIe unsupported request"}, | |
847 | {0x4B14, "PCIe acs violation"}, | |
848 | {0x4B15, "PCIe tlp prefix blocked"}, | |
1da177e4 LT |
849 | |
850 | {0x4C00, "Logical unit failed self-configuration"}, | |
851 | /* | |
852 | * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"}, | |
853 | */ | |
854 | {0x4E00, "Overlapped commands attempted"}, | |
855 | ||
856 | {0x5000, "Write append error"}, | |
857 | {0x5001, "Write append position error"}, | |
858 | {0x5002, "Position error related to timing"}, | |
859 | ||
860 | {0x5100, "Erase failure"}, | |
861 | {0x5101, "Erase failure - incomplete erase operation detected"}, | |
862 | ||
863 | {0x5200, "Cartridge fault"}, | |
864 | ||
865 | {0x5300, "Media load or eject failed"}, | |
866 | {0x5301, "Unload tape failure"}, | |
867 | {0x5302, "Medium removal prevented"}, | |
a507c6a2 DG |
868 | {0x5303, "Medium removal prevented by data transfer element"}, |
869 | {0x5304, "Medium thread or unthread failure"}, | |
655ee63c DG |
870 | {0x5305, "Volume identifier invalid"}, |
871 | {0x5306, "Volume identifier missing"}, | |
872 | {0x5307, "Duplicate volume identifier"}, | |
873 | {0x5308, "Element status unknown"}, | |
4e38bea6 DG |
874 | {0x5309, "Data transfer device error - load failed"}, |
875 | {0x530a, "Data transfer device error - unload failed"}, | |
876 | {0x530b, "Data transfer device error - unload missing"}, | |
877 | {0x530c, "Data transfer device error - eject failed"}, | |
878 | {0x530d, "Data transfer device error - library communication failed"}, | |
1da177e4 LT |
879 | |
880 | {0x5400, "Scsi to host system interface failure"}, | |
881 | ||
882 | {0x5500, "System resource failure"}, | |
883 | {0x5501, "System buffer full"}, | |
884 | {0x5502, "Insufficient reservation resources"}, | |
885 | {0x5503, "Insufficient resources"}, | |
886 | {0x5504, "Insufficient registration resources"}, | |
887 | {0x5505, "Insufficient access control resources"}, | |
888 | {0x5506, "Auxiliary memory out of space"}, | |
889 | {0x5507, "Quota error"}, | |
a507c6a2 | 890 | {0x5508, "Maximum number of supplemental decryption keys exceeded"}, |
b4567ca6 DG |
891 | {0x5509, "Medium auxiliary memory not accessible"}, |
892 | {0x550A, "Data currently unavailable"}, | |
655ee63c DG |
893 | {0x550B, "Insufficient power for operation"}, |
894 | {0x550C, "Insufficient resources to create rod"}, | |
895 | {0x550D, "Insufficient resources to create rod token"}, | |
4e38bea6 | 896 | {0x550E, "Insufficient zone resources"}, |
1da177e4 LT |
897 | |
898 | {0x5700, "Unable to recover table-of-contents"}, | |
899 | ||
900 | {0x5800, "Generation does not exist"}, | |
901 | ||
902 | {0x5900, "Updated block read"}, | |
903 | ||
904 | {0x5A00, "Operator request or state change input"}, | |
905 | {0x5A01, "Operator medium removal request"}, | |
906 | {0x5A02, "Operator selected write protect"}, | |
907 | {0x5A03, "Operator selected write permit"}, | |
908 | ||
909 | {0x5B00, "Log exception"}, | |
910 | {0x5B01, "Threshold condition met"}, | |
911 | {0x5B02, "Log counter at maximum"}, | |
912 | {0x5B03, "Log list codes exhausted"}, | |
913 | ||
914 | {0x5C00, "Rpl status change"}, | |
915 | {0x5C01, "Spindles synchronized"}, | |
916 | {0x5C02, "Spindles not synchronized"}, | |
917 | ||
918 | {0x5D00, "Failure prediction threshold exceeded"}, | |
919 | {0x5D01, "Media failure prediction threshold exceeded"}, | |
920 | {0x5D02, "Logical unit failure prediction threshold exceeded"}, | |
921 | {0x5D03, "Spare area exhaustion prediction threshold exceeded"}, | |
922 | {0x5D10, "Hardware impending failure general hard drive failure"}, | |
923 | {0x5D11, "Hardware impending failure drive error rate too high"}, | |
924 | {0x5D12, "Hardware impending failure data error rate too high"}, | |
925 | {0x5D13, "Hardware impending failure seek error rate too high"}, | |
926 | {0x5D14, "Hardware impending failure too many block reassigns"}, | |
927 | {0x5D15, "Hardware impending failure access times too high"}, | |
928 | {0x5D16, "Hardware impending failure start unit times too high"}, | |
929 | {0x5D17, "Hardware impending failure channel parametrics"}, | |
930 | {0x5D18, "Hardware impending failure controller detected"}, | |
931 | {0x5D19, "Hardware impending failure throughput performance"}, | |
932 | {0x5D1A, "Hardware impending failure seek time performance"}, | |
933 | {0x5D1B, "Hardware impending failure spin-up retry count"}, | |
934 | {0x5D1C, "Hardware impending failure drive calibration retry count"}, | |
935 | {0x5D20, "Controller impending failure general hard drive failure"}, | |
936 | {0x5D21, "Controller impending failure drive error rate too high"}, | |
937 | {0x5D22, "Controller impending failure data error rate too high"}, | |
938 | {0x5D23, "Controller impending failure seek error rate too high"}, | |
939 | {0x5D24, "Controller impending failure too many block reassigns"}, | |
940 | {0x5D25, "Controller impending failure access times too high"}, | |
941 | {0x5D26, "Controller impending failure start unit times too high"}, | |
942 | {0x5D27, "Controller impending failure channel parametrics"}, | |
943 | {0x5D28, "Controller impending failure controller detected"}, | |
944 | {0x5D29, "Controller impending failure throughput performance"}, | |
945 | {0x5D2A, "Controller impending failure seek time performance"}, | |
946 | {0x5D2B, "Controller impending failure spin-up retry count"}, | |
947 | {0x5D2C, "Controller impending failure drive calibration retry count"}, | |
948 | {0x5D30, "Data channel impending failure general hard drive failure"}, | |
949 | {0x5D31, "Data channel impending failure drive error rate too high"}, | |
950 | {0x5D32, "Data channel impending failure data error rate too high"}, | |
951 | {0x5D33, "Data channel impending failure seek error rate too high"}, | |
952 | {0x5D34, "Data channel impending failure too many block reassigns"}, | |
953 | {0x5D35, "Data channel impending failure access times too high"}, | |
954 | {0x5D36, "Data channel impending failure start unit times too high"}, | |
955 | {0x5D37, "Data channel impending failure channel parametrics"}, | |
956 | {0x5D38, "Data channel impending failure controller detected"}, | |
957 | {0x5D39, "Data channel impending failure throughput performance"}, | |
958 | {0x5D3A, "Data channel impending failure seek time performance"}, | |
959 | {0x5D3B, "Data channel impending failure spin-up retry count"}, | |
960 | {0x5D3C, "Data channel impending failure drive calibration retry " | |
961 | "count"}, | |
962 | {0x5D40, "Servo impending failure general hard drive failure"}, | |
963 | {0x5D41, "Servo impending failure drive error rate too high"}, | |
964 | {0x5D42, "Servo impending failure data error rate too high"}, | |
965 | {0x5D43, "Servo impending failure seek error rate too high"}, | |
966 | {0x5D44, "Servo impending failure too many block reassigns"}, | |
967 | {0x5D45, "Servo impending failure access times too high"}, | |
968 | {0x5D46, "Servo impending failure start unit times too high"}, | |
969 | {0x5D47, "Servo impending failure channel parametrics"}, | |
970 | {0x5D48, "Servo impending failure controller detected"}, | |
971 | {0x5D49, "Servo impending failure throughput performance"}, | |
972 | {0x5D4A, "Servo impending failure seek time performance"}, | |
973 | {0x5D4B, "Servo impending failure spin-up retry count"}, | |
974 | {0x5D4C, "Servo impending failure drive calibration retry count"}, | |
975 | {0x5D50, "Spindle impending failure general hard drive failure"}, | |
976 | {0x5D51, "Spindle impending failure drive error rate too high"}, | |
977 | {0x5D52, "Spindle impending failure data error rate too high"}, | |
978 | {0x5D53, "Spindle impending failure seek error rate too high"}, | |
979 | {0x5D54, "Spindle impending failure too many block reassigns"}, | |
980 | {0x5D55, "Spindle impending failure access times too high"}, | |
981 | {0x5D56, "Spindle impending failure start unit times too high"}, | |
982 | {0x5D57, "Spindle impending failure channel parametrics"}, | |
983 | {0x5D58, "Spindle impending failure controller detected"}, | |
984 | {0x5D59, "Spindle impending failure throughput performance"}, | |
985 | {0x5D5A, "Spindle impending failure seek time performance"}, | |
986 | {0x5D5B, "Spindle impending failure spin-up retry count"}, | |
987 | {0x5D5C, "Spindle impending failure drive calibration retry count"}, | |
988 | {0x5D60, "Firmware impending failure general hard drive failure"}, | |
989 | {0x5D61, "Firmware impending failure drive error rate too high"}, | |
990 | {0x5D62, "Firmware impending failure data error rate too high"}, | |
991 | {0x5D63, "Firmware impending failure seek error rate too high"}, | |
992 | {0x5D64, "Firmware impending failure too many block reassigns"}, | |
993 | {0x5D65, "Firmware impending failure access times too high"}, | |
994 | {0x5D66, "Firmware impending failure start unit times too high"}, | |
995 | {0x5D67, "Firmware impending failure channel parametrics"}, | |
996 | {0x5D68, "Firmware impending failure controller detected"}, | |
997 | {0x5D69, "Firmware impending failure throughput performance"}, | |
998 | {0x5D6A, "Firmware impending failure seek time performance"}, | |
999 | {0x5D6B, "Firmware impending failure spin-up retry count"}, | |
1000 | {0x5D6C, "Firmware impending failure drive calibration retry count"}, | |
1001 | {0x5DFF, "Failure prediction threshold exceeded (false)"}, | |
1002 | ||
1003 | {0x5E00, "Low power condition on"}, | |
1004 | {0x5E01, "Idle condition activated by timer"}, | |
1005 | {0x5E02, "Standby condition activated by timer"}, | |
1006 | {0x5E03, "Idle condition activated by command"}, | |
1007 | {0x5E04, "Standby condition activated by command"}, | |
b4567ca6 DG |
1008 | {0x5E05, "Idle_b condition activated by timer"}, |
1009 | {0x5E06, "Idle_b condition activated by command"}, | |
1010 | {0x5E07, "Idle_c condition activated by timer"}, | |
1011 | {0x5E08, "Idle_c condition activated by command"}, | |
1012 | {0x5E09, "Standby_y condition activated by timer"}, | |
1013 | {0x5E0A, "Standby_y condition activated by command"}, | |
1da177e4 LT |
1014 | {0x5E41, "Power state change to active"}, |
1015 | {0x5E42, "Power state change to idle"}, | |
1016 | {0x5E43, "Power state change to standby"}, | |
1017 | {0x5E45, "Power state change to sleep"}, | |
1018 | {0x5E47, "Power state change to device control"}, | |
1019 | ||
1020 | {0x6000, "Lamp failure"}, | |
1021 | ||
1022 | {0x6100, "Video acquisition error"}, | |
1023 | {0x6101, "Unable to acquire video"}, | |
1024 | {0x6102, "Out of focus"}, | |
1025 | ||
1026 | {0x6200, "Scan head positioning error"}, | |
1027 | ||
1028 | {0x6300, "End of user area encountered on this track"}, | |
1029 | {0x6301, "Packet does not fit in available space"}, | |
1030 | ||
1031 | {0x6400, "Illegal mode for this track"}, | |
1032 | {0x6401, "Invalid packet size"}, | |
1033 | ||
1034 | {0x6500, "Voltage fault"}, | |
1035 | ||
1036 | {0x6600, "Automatic document feeder cover up"}, | |
1037 | {0x6601, "Automatic document feeder lift up"}, | |
1038 | {0x6602, "Document jam in automatic document feeder"}, | |
1039 | {0x6603, "Document miss feed automatic in document feeder"}, | |
1040 | ||
1041 | {0x6700, "Configuration failure"}, | |
1042 | {0x6701, "Configuration of incapable logical units failed"}, | |
1043 | {0x6702, "Add logical unit failed"}, | |
1044 | {0x6703, "Modification of logical unit failed"}, | |
1045 | {0x6704, "Exchange of logical unit failed"}, | |
1046 | {0x6705, "Remove of logical unit failed"}, | |
1047 | {0x6706, "Attachment of logical unit failed"}, | |
1048 | {0x6707, "Creation of logical unit failed"}, | |
1049 | {0x6708, "Assign failure occurred"}, | |
1050 | {0x6709, "Multiply assigned logical unit"}, | |
1051 | {0x670A, "Set target port groups command failed"}, | |
a507c6a2 | 1052 | {0x670B, "ATA device feature not enabled"}, |
1da177e4 LT |
1053 | |
1054 | {0x6800, "Logical unit not configured"}, | |
655ee63c | 1055 | {0x6801, "Subsidiary logical unit not configured"}, |
1da177e4 LT |
1056 | |
1057 | {0x6900, "Data loss on logical unit"}, | |
1058 | {0x6901, "Multiple logical unit failures"}, | |
1059 | {0x6902, "Parity/data mismatch"}, | |
1060 | ||
1061 | {0x6A00, "Informational, refer to log"}, | |
1062 | ||
1063 | {0x6B00, "State change has occurred"}, | |
1064 | {0x6B01, "Redundancy level got better"}, | |
1065 | {0x6B02, "Redundancy level got worse"}, | |
1066 | ||
1067 | {0x6C00, "Rebuild failure occurred"}, | |
1068 | ||
1069 | {0x6D00, "Recalculate failure occurred"}, | |
1070 | ||
1071 | {0x6E00, "Command to logical unit failed"}, | |
1072 | ||
1073 | {0x6F00, "Copy protection key exchange failure - authentication " | |
1074 | "failure"}, | |
1075 | {0x6F01, "Copy protection key exchange failure - key not present"}, | |
1076 | {0x6F02, "Copy protection key exchange failure - key not established"}, | |
1077 | {0x6F03, "Read of scrambled sector without authentication"}, | |
1078 | {0x6F04, "Media region code is mismatched to logical unit region"}, | |
1079 | {0x6F05, "Drive region must be permanent/region reset count error"}, | |
a507c6a2 DG |
1080 | {0x6F06, "Insufficient block count for binding nonce recording"}, |
1081 | {0x6F07, "Conflict in binding nonce recording"}, | |
1da177e4 LT |
1082 | /* |
1083 | * {0x70NN, "Decompression exception short algorithm id of nn"}, | |
1084 | */ | |
1085 | {0x7100, "Decompression exception long algorithm id"}, | |
1086 | ||
1087 | {0x7200, "Session fixation error"}, | |
1088 | {0x7201, "Session fixation error writing lead-in"}, | |
1089 | {0x7202, "Session fixation error writing lead-out"}, | |
1090 | {0x7203, "Session fixation error - incomplete track in session"}, | |
1091 | {0x7204, "Empty or partially written reserved track"}, | |
1092 | {0x7205, "No more track reservations allowed"}, | |
a507c6a2 DG |
1093 | {0x7206, "RMZ extension is not allowed"}, |
1094 | {0x7207, "No more test zone extensions are allowed"}, | |
1da177e4 LT |
1095 | |
1096 | {0x7300, "Cd control error"}, | |
1097 | {0x7301, "Power calibration area almost full"}, | |
1098 | {0x7302, "Power calibration area is full"}, | |
1099 | {0x7303, "Power calibration area error"}, | |
1100 | {0x7304, "Program memory area update failure"}, | |
1101 | {0x7305, "Program memory area is full"}, | |
1102 | {0x7306, "RMA/PMA is almost full"}, | |
a507c6a2 DG |
1103 | {0x7310, "Current power calibration area almost full"}, |
1104 | {0x7311, "Current power calibration area is full"}, | |
1105 | {0x7317, "RDZ is full"}, | |
1106 | ||
1107 | {0x7400, "Security error"}, | |
1108 | {0x7401, "Unable to decrypt data"}, | |
1109 | {0x7402, "Unencrypted data encountered while decrypting"}, | |
1110 | {0x7403, "Incorrect data encryption key"}, | |
1111 | {0x7404, "Cryptographic integrity validation failed"}, | |
1112 | {0x7405, "Error decrypting data"}, | |
b4567ca6 DG |
1113 | {0x7406, "Unknown signature verification key"}, |
1114 | {0x7407, "Encryption parameters not useable"}, | |
1115 | {0x7408, "Digital signature validation failure"}, | |
1116 | {0x7409, "Encryption mode mismatch on read"}, | |
1117 | {0x740A, "Encrypted block not raw read enabled"}, | |
1118 | {0x740B, "Incorrect Encryption parameters"}, | |
1119 | {0x740C, "Unable to decrypt parameter list"}, | |
1120 | {0x740D, "Encryption algorithm disabled"}, | |
1121 | {0x7410, "SA creation parameter value invalid"}, | |
1122 | {0x7411, "SA creation parameter value rejected"}, | |
1123 | {0x7412, "Invalid SA usage"}, | |
1124 | {0x7421, "Data Encryption configuration prevented"}, | |
1125 | {0x7430, "SA creation parameter not supported"}, | |
1126 | {0x7440, "Authentication failed"}, | |
1127 | {0x7461, "External data encryption key manager access error"}, | |
1128 | {0x7462, "External data encryption key manager error"}, | |
1129 | {0x7463, "External data encryption key not found"}, | |
1130 | {0x7464, "External data encryption request not authorized"}, | |
1131 | {0x746E, "External data encryption control timeout"}, | |
1132 | {0x746F, "External data encryption control error"}, | |
a507c6a2 | 1133 | {0x7471, "Logical unit access not authorized"}, |
b4567ca6 | 1134 | {0x7479, "Security conflict in translated device"}, |
a507c6a2 | 1135 | |
1da177e4 LT |
1136 | {0, NULL} |
1137 | }; | |
1138 | ||
1139 | struct error_info2 { | |
1140 | unsigned char code1, code2_min, code2_max; | |
d811b848 | 1141 | const char * str; |
1da177e4 LT |
1142 | const char * fmt; |
1143 | }; | |
1144 | ||
0ad78200 | 1145 | static const struct error_info2 additional2[] = |
1da177e4 | 1146 | { |
d811b848 HR |
1147 | {0x40, 0x00, 0x7f, "Ram failure", ""}, |
1148 | {0x40, 0x80, 0xff, "Diagnostic failure on component", ""}, | |
1149 | {0x41, 0x00, 0xff, "Data path failure", ""}, | |
1150 | {0x42, 0x00, 0xff, "Power-on or self-test failure", ""}, | |
1151 | {0x4D, 0x00, 0xff, "Tagged overlapped commands", "task tag "}, | |
1152 | {0x70, 0x00, 0xff, "Decompression exception", "short algorithm id of "}, | |
1153 | {0, 0, 0, NULL, NULL} | |
1da177e4 LT |
1154 | }; |
1155 | ||
1156 | /* description of the sense key values */ | |
0ad78200 | 1157 | static const char * const snstext[] = { |
1da177e4 LT |
1158 | "No Sense", /* 0: There is no sense information */ |
1159 | "Recovered Error", /* 1: The last command completed successfully | |
1160 | but used error correction */ | |
1161 | "Not Ready", /* 2: The addressed target is not ready */ | |
1162 | "Medium Error", /* 3: Data error detected on the medium */ | |
1163 | "Hardware Error", /* 4: Controller or device failure */ | |
1164 | "Illegal Request", /* 5: Error in request */ | |
1165 | "Unit Attention", /* 6: Removable medium was changed, or | |
1166 | the target has been reset, or ... */ | |
1167 | "Data Protect", /* 7: Access to the data is blocked */ | |
1168 | "Blank Check", /* 8: Reached unexpected written or unwritten | |
1169 | region of the medium */ | |
1170 | "Vendor Specific(9)", | |
1171 | "Copy Aborted", /* A: COPY or COMPARE was aborted */ | |
1172 | "Aborted Command", /* B: The target aborted the command */ | |
655ee63c DG |
1173 | "Equal", /* C: A SEARCH DATA command found data equal, |
1174 | reserved in SPC-4 rev 36 */ | |
1da177e4 LT |
1175 | "Volume Overflow", /* D: Medium full with still data to be written */ |
1176 | "Miscompare", /* E: Source data and data on the medium | |
1177 | do not agree */ | |
655ee63c DG |
1178 | "Completed", /* F: command completed sense data reported, |
1179 | may occur for successful command */ | |
1da177e4 | 1180 | }; |
1da177e4 LT |
1181 | |
1182 | /* Get sense key string or NULL if not available */ | |
1183 | const char * | |
1184 | scsi_sense_key_string(unsigned char key) { | |
1da177e4 LT |
1185 | if (key <= 0xE) |
1186 | return snstext[key]; | |
1da177e4 LT |
1187 | return NULL; |
1188 | } | |
1189 | EXPORT_SYMBOL(scsi_sense_key_string); | |
1190 | ||
1191 | /* | |
1192 | * Get additional sense code string or NULL if not available. | |
1193 | * This string may contain a "%x" and should be printed with ascq as arg. | |
1194 | */ | |
1195 | const char * | |
d811b848 HR |
1196 | scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt) |
1197 | { | |
1da177e4 LT |
1198 | int i; |
1199 | unsigned short code = ((asc << 8) | ascq); | |
1200 | ||
249b15ba | 1201 | *fmt = NULL; |
b4567ca6 | 1202 | for (i = 0; additional[i].text; i++) |
1da177e4 LT |
1203 | if (additional[i].code12 == code) |
1204 | return additional[i].text; | |
b4567ca6 | 1205 | for (i = 0; additional2[i].fmt; i++) { |
1da177e4 | 1206 | if (additional2[i].code1 == asc && |
b4567ca6 | 1207 | ascq >= additional2[i].code2_min && |
d811b848 HR |
1208 | ascq <= additional2[i].code2_max) { |
1209 | *fmt = additional2[i].fmt; | |
1210 | return additional2[i].str; | |
1211 | } | |
b4567ca6 | 1212 | } |
1da177e4 LT |
1213 | return NULL; |
1214 | } | |
1215 | EXPORT_SYMBOL(scsi_extd_sense_format); | |
1216 | ||
0ad78200 | 1217 | static const char * const hostbyte_table[]={ |
6391a113 | 1218 | "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", |
1da177e4 | 1219 | "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR", |
a4dfaa6f | 1220 | "DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE", |
f1ba8a4f MB |
1221 | "DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST", "DID_TARGET_FAILURE", |
1222 | "DID_NEXUS_FAILURE" }; | |
1da177e4 | 1223 | |
0ad78200 | 1224 | static const char * const driverbyte_table[]={ |
6391a113 | 1225 | "DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR", |
1da177e4 | 1226 | "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"}; |
1da177e4 | 1227 | |
3cc958cc | 1228 | const char *scsi_hostbyte_string(int result) |
1da177e4 | 1229 | { |
3cc958cc | 1230 | const char *hb_string = NULL; |
684b7fe9 | 1231 | int hb = host_byte(result); |
1da177e4 | 1232 | |
3cc958cc HR |
1233 | if (hb < ARRAY_SIZE(hostbyte_table)) |
1234 | hb_string = hostbyte_table[hb]; | |
3cc958cc | 1235 | return hb_string; |
1da177e4 | 1236 | } |
3cc958cc | 1237 | EXPORT_SYMBOL(scsi_hostbyte_string); |
684b7fe9 | 1238 | |
3cc958cc HR |
1239 | const char *scsi_driverbyte_string(int result) |
1240 | { | |
1241 | const char *db_string = NULL; | |
3cc958cc HR |
1242 | int db = driver_byte(result); |
1243 | ||
1244 | if (db < ARRAY_SIZE(driverbyte_table)) | |
1245 | db_string = driverbyte_table[db]; | |
3cc958cc HR |
1246 | return db_string; |
1247 | } | |
1248 | EXPORT_SYMBOL(scsi_driverbyte_string); | |
684b7fe9 | 1249 | |
c11c004b HR |
1250 | #define scsi_mlreturn_name(result) { result, #result } |
1251 | static const struct value_name_pair scsi_mlreturn_arr[] = { | |
1252 | scsi_mlreturn_name(NEEDS_RETRY), | |
1253 | scsi_mlreturn_name(SUCCESS), | |
1254 | scsi_mlreturn_name(FAILED), | |
1255 | scsi_mlreturn_name(QUEUED), | |
1256 | scsi_mlreturn_name(SOFT_ERROR), | |
1257 | scsi_mlreturn_name(ADD_TO_MLQUEUE), | |
1258 | scsi_mlreturn_name(TIMEOUT_ERROR), | |
1259 | scsi_mlreturn_name(SCSI_RETURN_NOT_HANDLED), | |
1260 | scsi_mlreturn_name(FAST_IO_FAIL) | |
1261 | }; | |
c11c004b HR |
1262 | |
1263 | const char *scsi_mlreturn_string(int result) | |
1264 | { | |
c11c004b HR |
1265 | const struct value_name_pair *arr = scsi_mlreturn_arr; |
1266 | int k; | |
1267 | ||
1268 | for (k = 0; k < ARRAY_SIZE(scsi_mlreturn_arr); ++k, ++arr) { | |
1269 | if (result == arr->value) | |
1270 | return arr->name; | |
1271 | } | |
c11c004b HR |
1272 | return NULL; |
1273 | } | |
1274 | EXPORT_SYMBOL(scsi_mlreturn_string); |