[SCSI] lpfc 8.3.0 : Fix several minor issues

[deliverable/linux.git] / drivers / scsi / lpfc / lpfc_init.c

/*******************************************************************
 * This file is part of the Emulex Linux Device Driver for         *
 * Fibre Channel Host Bus Adapters.                                *
 * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
 * EMULEX and SLI are trademarks of Emulex.                        *
 * www.emulex.com                                                  *
 * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
 *                                                                 *
 * This program is free software; you can redistribute it and/or   *
 * modify it under the terms of version 2 of the GNU General       *
 * Public License as published by the Free Software Foundation.    *
 * This program is distributed in the hope that it will be useful. *
 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
 * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
 * more details, a copy of which can be found in the file COPYING  *
 * included with this package.                                     *
 *******************************************************************/

#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
#include <linux/interrupt.h>
#include <linux/kthread.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>

#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>

#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"
#include "lpfc_version.h"

static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
static int lpfc_post_rcv_buf(struct lpfc_hba *);

static struct scsi_transport_template *lpfc_transport_template = NULL;
static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
static DEFINE_IDR(lpfc_hba_index);

/**
 * lpfc_config_port_prep: Perform lpfc initialization prior to config port.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine will do LPFC initialization prior to issuing the CONFIG_PORT
 * mailbox command. It retrieves the revision information from the HBA and
 * collects the Vital Product Data (VPD) about the HBA for preparing the
 * configuration of the HBA.
 *
 * Return codes:
 *   0 - success.
 *   -ERESTART - requests the SLI layer to reset the HBA and try again.
 *   Any other value - indicates an error.
 **/
int
lpfc_config_port_prep(struct lpfc_hba *phba)
{
	lpfc_vpd_t *vp = &phba->vpd;
	int i = 0, rc;
	LPFC_MBOXQ_t *pmb;
	MAILBOX_t *mb;
	char *lpfc_vpd_data = NULL;
	uint16_t offset = 0;
	static char licensed[56] =
		    "key unlock for use with gnu public licensed code only\0";
	static int init_key = 1;

	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	if (!pmb) {
		phba->link_state = LPFC_HBA_ERROR;
		return -ENOMEM;
	}

	mb = &pmb->mb;
	phba->link_state = LPFC_INIT_MBX_CMDS;

	if (lpfc_is_LC_HBA(phba->pcidev->device)) {
		if (init_key) {
			uint32_t *ptext = (uint32_t *) licensed;

			for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
				*ptext = cpu_to_be32(*ptext);
			init_key = 0;
		}

		lpfc_read_nv(phba, pmb);
		memset((char*)mb->un.varRDnvp.rsvd3, 0,
			sizeof (mb->un.varRDnvp.rsvd3));
		memcpy((char*)mb->un.varRDnvp.rsvd3, licensed,
			 sizeof (licensed));

		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);

		if (rc != MBX_SUCCESS) {
			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
					"0324 Config Port initialization "
					"error, mbxCmd x%x READ_NVPARM, "
					"mbxStatus x%x\n",
					mb->mbxCommand, mb->mbxStatus);
			mempool_free(pmb, phba->mbox_mem_pool);
			return -ERESTART;
		}
		memcpy(phba->wwnn, (char *)mb->un.varRDnvp.nodename,
		       sizeof(phba->wwnn));
		memcpy(phba->wwpn, (char *)mb->un.varRDnvp.portname,
		       sizeof(phba->wwpn));
	}

	phba->sli3_options = 0x0;

	/* Setup and issue mailbox READ REV command */
	lpfc_read_rev(phba, pmb);
	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
	if (rc != MBX_SUCCESS) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0439 Adapter failed to init, mbxCmd x%x "
				"READ_REV, mbxStatus x%x\n",
				mb->mbxCommand, mb->mbxStatus);
		mempool_free( pmb, phba->mbox_mem_pool);
		return -ERESTART;
	}


	/*
	 * The value of rr must be 1 since the driver set the cv field to 1.
	 * This setting requires the FW to set all revision fields.
	 */
	if (mb->un.varRdRev.rr == 0) {
		vp->rev.rBit = 0;
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0440 Adapter failed to init, READ_REV has "
				"missing revision information.\n");
		mempool_free(pmb, phba->mbox_mem_pool);
		return -ERESTART;
	}

	if (phba->sli_rev == 3 && !mb->un.varRdRev.v3rsp) {
		mempool_free(pmb, phba->mbox_mem_pool);
		return -EINVAL;
	}

	/* Save information as VPD data */
	vp->rev.rBit = 1;
	memcpy(&vp->sli3Feat, &mb->un.varRdRev.sli3Feat, sizeof(uint32_t));
	vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev;
	memcpy(vp->rev.sli1FwName, (char*) mb->un.varRdRev.sli1FwName, 16);
	vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev;
	memcpy(vp->rev.sli2FwName, (char *) mb->un.varRdRev.sli2FwName, 16);
	vp->rev.biuRev = mb->un.varRdRev.biuRev;
	vp->rev.smRev = mb->un.varRdRev.smRev;
	vp->rev.smFwRev = mb->un.varRdRev.un.smFwRev;
	vp->rev.endecRev = mb->un.varRdRev.endecRev;
	vp->rev.fcphHigh = mb->un.varRdRev.fcphHigh;
	vp->rev.fcphLow = mb->un.varRdRev.fcphLow;
	vp->rev.feaLevelHigh = mb->un.varRdRev.feaLevelHigh;
	vp->rev.feaLevelLow = mb->un.varRdRev.feaLevelLow;
	vp->rev.postKernRev = mb->un.varRdRev.postKernRev;
	vp->rev.opFwRev = mb->un.varRdRev.opFwRev;

	/* If the sli feature level is less then 9, we must
	 * tear down all RPIs and VPIs on link down if NPIV
	 * is enabled.
	 */
	if (vp->rev.feaLevelHigh < 9)
		phba->sli3_options |= LPFC_SLI3_VPORT_TEARDOWN;

	if (lpfc_is_LC_HBA(phba->pcidev->device))
		memcpy(phba->RandomData, (char *)&mb->un.varWords[24],
						sizeof (phba->RandomData));

	/* Get adapter VPD information */
	lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL);
	if (!lpfc_vpd_data)
		goto out_free_mbox;

	do {
		lpfc_dump_mem(phba, pmb, offset);
		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);

		if (rc != MBX_SUCCESS) {
			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
					"0441 VPD not present on adapter, "
					"mbxCmd x%x DUMP VPD, mbxStatus x%x\n",
					mb->mbxCommand, mb->mbxStatus);
			mb->un.varDmp.word_cnt = 0;
		}
		if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset)
			mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset;
		lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
				      lpfc_vpd_data + offset,
				      mb->un.varDmp.word_cnt);
		offset += mb->un.varDmp.word_cnt;
	} while (mb->un.varDmp.word_cnt && offset < DMP_VPD_SIZE);
	lpfc_parse_vpd(phba, lpfc_vpd_data, offset);

	kfree(lpfc_vpd_data);
out_free_mbox:
	mempool_free(pmb, phba->mbox_mem_pool);
	return 0;
}

/**
 * lpfc_config_async_cmpl: Completion handler for config async event mbox cmd.
 * @phba: pointer to lpfc hba data structure.
 * @pmboxq: pointer to the driver internal queue element for mailbox command.
 *
 * This is the completion handler for driver's configuring asynchronous event
 * mailbox command to the device. If the mailbox command returns successfully,
 * it will set internal async event support flag to 1; otherwise, it will
 * set internal async event support flag to 0.
 **/
static void
lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
{
	if (pmboxq->mb.mbxStatus == MBX_SUCCESS)
		phba->temp_sensor_support = 1;
	else
		phba->temp_sensor_support = 0;
	mempool_free(pmboxq, phba->mbox_mem_pool);
	return;
}

/**
 * lpfc_dump_wakeup_param_cmpl: Completion handler for dump memory mailbox
 *     command used for getting wake up parameters.
 * @phba: pointer to lpfc hba data structure.
 * @pmboxq: pointer to the driver internal queue element for mailbox command.
 *
 * This is the completion handler for dump mailbox command for getting
 * wake up parameters. When this command complete, the response contain
 * Option rom version of the HBA. This function translate the version number
 * into a human readable string and store it in OptionROMVersion.
 **/
static void
lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
{
	struct prog_id *prg;
	uint32_t prog_id_word;
	char dist = ' ';
	/* character array used for decoding dist type. */
	char dist_char[] = "nabx";

	if (pmboxq->mb.mbxStatus != MBX_SUCCESS)
		return;

	prg = (struct prog_id *) &prog_id_word;

	/* word 7 contain option rom version */
	prog_id_word = pmboxq->mb.un.varWords[7];

	/* Decode the Option rom version word to a readable string */
	if (prg->dist < 4)
		dist = dist_char[prg->dist];

	if ((prg->dist == 3) && (prg->num == 0))
		sprintf(phba->OptionROMVersion, "%d.%d%d",
			prg->ver, prg->rev, prg->lev);
	else
		sprintf(phba->OptionROMVersion, "%d.%d%d%c%d",
			prg->ver, prg->rev, prg->lev,
			dist, prg->num);
	return;
}

/**
 * lpfc_config_port_post: Perform lpfc initialization after config port.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine will do LPFC initialization after the CONFIG_PORT mailbox
 * command call. It performs all internal resource and state setups on the
 * port: post IOCB buffers, enable appropriate host interrupt attentions,
 * ELS ring timers, etc.
 *
 * Return codes
 *   0 - success.
 *   Any other value - error.
 **/
int
lpfc_config_port_post(struct lpfc_hba *phba)
{
	struct lpfc_vport *vport = phba->pport;
	LPFC_MBOXQ_t *pmb;
	MAILBOX_t *mb;
	struct lpfc_dmabuf *mp;
	struct lpfc_sli *psli = &phba->sli;
	uint32_t status, timeout;
	int i, j;
	int rc;

	spin_lock_irq(&phba->hbalock);
	/*
	 * If the Config port completed correctly the HBA is not
	 * over heated any more.
	 */
	if (phba->over_temp_state == HBA_OVER_TEMP)
		phba->over_temp_state = HBA_NORMAL_TEMP;
	spin_unlock_irq(&phba->hbalock);

	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	if (!pmb) {
		phba->link_state = LPFC_HBA_ERROR;
		return -ENOMEM;
	}
	mb = &pmb->mb;

	/* Get login parameters for NID.  */
	lpfc_read_sparam(phba, pmb, 0);
	pmb->vport = vport;
	if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0448 Adapter failed init, mbxCmd x%x "
				"READ_SPARM mbxStatus x%x\n",
				mb->mbxCommand, mb->mbxStatus);
		phba->link_state = LPFC_HBA_ERROR;
		mp = (struct lpfc_dmabuf *) pmb->context1;
		mempool_free( pmb, phba->mbox_mem_pool);
		lpfc_mbuf_free(phba, mp->virt, mp->phys);
		kfree(mp);
		return -EIO;
	}

	mp = (struct lpfc_dmabuf *) pmb->context1;

	memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
	lpfc_mbuf_free(phba, mp->virt, mp->phys);
	kfree(mp);
	pmb->context1 = NULL;

	if (phba->cfg_soft_wwnn)
		u64_to_wwn(phba->cfg_soft_wwnn,
			   vport->fc_sparam.nodeName.u.wwn);
	if (phba->cfg_soft_wwpn)
		u64_to_wwn(phba->cfg_soft_wwpn,
			   vport->fc_sparam.portName.u.wwn);
	memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
	       sizeof (struct lpfc_name));
	memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
	       sizeof (struct lpfc_name));
	/* If no serial number in VPD data, use low 6 bytes of WWNN */
	/* This should be consolidated into parse_vpd ? - mr */
	if (phba->SerialNumber[0] == 0) {
		uint8_t *outptr;

		outptr = &vport->fc_nodename.u.s.IEEE[0];
		for (i = 0; i < 12; i++) {
			status = *outptr++;
			j = ((status & 0xf0) >> 4);
			if (j <= 9)
				phba->SerialNumber[i] =
				    (char)((uint8_t) 0x30 + (uint8_t) j);
			else
				phba->SerialNumber[i] =
				    (char)((uint8_t) 0x61 + (uint8_t) (j - 10));
			i++;
			j = (status & 0xf);
			if (j <= 9)
				phba->SerialNumber[i] =
				    (char)((uint8_t) 0x30 + (uint8_t) j);
			else
				phba->SerialNumber[i] =
				    (char)((uint8_t) 0x61 + (uint8_t) (j - 10));
		}
	}

	lpfc_read_config(phba, pmb);
	pmb->vport = vport;
	if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0453 Adapter failed to init, mbxCmd x%x "
				"READ_CONFIG, mbxStatus x%x\n",
				mb->mbxCommand, mb->mbxStatus);
		phba->link_state = LPFC_HBA_ERROR;
		mempool_free( pmb, phba->mbox_mem_pool);
		return -EIO;
	}

	/* Reset the DFT_HBA_Q_DEPTH to the max xri  */
	if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1))
		phba->cfg_hba_queue_depth =
			mb->un.varRdConfig.max_xri + 1;

	phba->lmt = mb->un.varRdConfig.lmt;

	/* Get the default values for Model Name and Description */
	lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);

	if ((phba->cfg_link_speed > LINK_SPEED_10G)
	    || ((phba->cfg_link_speed == LINK_SPEED_1G)
		&& !(phba->lmt & LMT_1Gb))
	    || ((phba->cfg_link_speed == LINK_SPEED_2G)
		&& !(phba->lmt & LMT_2Gb))
	    || ((phba->cfg_link_speed == LINK_SPEED_4G)
		&& !(phba->lmt & LMT_4Gb))
	    || ((phba->cfg_link_speed == LINK_SPEED_8G)
		&& !(phba->lmt & LMT_8Gb))
	    || ((phba->cfg_link_speed == LINK_SPEED_10G)
		&& !(phba->lmt & LMT_10Gb))) {
		/* Reset link speed to auto */
		lpfc_printf_log(phba, KERN_WARNING, LOG_LINK_EVENT,
			"1302 Invalid speed for this board: "
			"Reset link speed to auto: x%x\n",
			phba->cfg_link_speed);
			phba->cfg_link_speed = LINK_SPEED_AUTO;
	}

	phba->link_state = LPFC_LINK_DOWN;

	/* Only process IOCBs on ELS ring till hba_state is READY */
	if (psli->ring[psli->extra_ring].cmdringaddr)
		psli->ring[psli->extra_ring].flag |= LPFC_STOP_IOCB_EVENT;
	if (psli->ring[psli->fcp_ring].cmdringaddr)
		psli->ring[psli->fcp_ring].flag |= LPFC_STOP_IOCB_EVENT;
	if (psli->ring[psli->next_ring].cmdringaddr)
		psli->ring[psli->next_ring].flag |= LPFC_STOP_IOCB_EVENT;

	/* Post receive buffers for desired rings */
	if (phba->sli_rev != 3)
		lpfc_post_rcv_buf(phba);

	/*
	 * Configure HBA MSI-X attention conditions to messages if MSI-X mode
	 */
	if (phba->intr_type == MSIX) {
		rc = lpfc_config_msi(phba, pmb);
		if (rc) {
			mempool_free(pmb, phba->mbox_mem_pool);
			return -EIO;
		}
		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
		if (rc != MBX_SUCCESS) {
			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
					"0352 Config MSI mailbox command "
					"failed, mbxCmd x%x, mbxStatus x%x\n",
					pmb->mb.mbxCommand, pmb->mb.mbxStatus);
			mempool_free(pmb, phba->mbox_mem_pool);
			return -EIO;
		}
	}

	/* Initialize ERATT handling flag */
	phba->hba_flag &= ~HBA_ERATT_HANDLED;

	/* Enable appropriate host interrupts */
	spin_lock_irq(&phba->hbalock);
	status = readl(phba->HCregaddr);
	status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
	if (psli->num_rings > 0)
		status |= HC_R0INT_ENA;
	if (psli->num_rings > 1)
		status |= HC_R1INT_ENA;
	if (psli->num_rings > 2)
		status |= HC_R2INT_ENA;
	if (psli->num_rings > 3)
		status |= HC_R3INT_ENA;

	if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) &&
	    (phba->cfg_poll & DISABLE_FCP_RING_INT))
		status &= ~(HC_R0INT_ENA);

	writel(status, phba->HCregaddr);
	readl(phba->HCregaddr); /* flush */
	spin_unlock_irq(&phba->hbalock);

	/* Set up ring-0 (ELS) timer */
	timeout = phba->fc_ratov * 2;
	mod_timer(&vport->els_tmofunc, jiffies + HZ * timeout);
	/* Set up heart beat (HB) timer */
	mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
	phba->hb_outstanding = 0;
	phba->last_completion_time = jiffies;
	/* Set up error attention (ERATT) polling timer */
	mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);

	lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed);
	pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
	lpfc_set_loopback_flag(phba);
	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
	if (rc != MBX_SUCCESS) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0454 Adapter failed to init, mbxCmd x%x "
				"INIT_LINK, mbxStatus x%x\n",
				mb->mbxCommand, mb->mbxStatus);

		/* Clear all interrupt enable conditions */
		writel(0, phba->HCregaddr);
		readl(phba->HCregaddr); /* flush */
		/* Clear all pending interrupts */
		writel(0xffffffff, phba->HAregaddr);
		readl(phba->HAregaddr); /* flush */

		phba->link_state = LPFC_HBA_ERROR;
		if (rc != MBX_BUSY)
			mempool_free(pmb, phba->mbox_mem_pool);
		return -EIO;
	}
	/* MBOX buffer will be freed in mbox compl */
	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	lpfc_config_async(phba, pmb, LPFC_ELS_RING);
	pmb->mbox_cmpl = lpfc_config_async_cmpl;
	pmb->vport = phba->pport;
	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);

	if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
		lpfc_printf_log(phba,
				KERN_ERR,
				LOG_INIT,
				"0456 Adapter failed to issue "
				"ASYNCEVT_ENABLE mbox status x%x \n.",
				rc);
		mempool_free(pmb, phba->mbox_mem_pool);
	}

	/* Get Option rom version */
	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	lpfc_dump_wakeup_param(phba, pmb);
	pmb->mbox_cmpl = lpfc_dump_wakeup_param_cmpl;
	pmb->vport = phba->pport;
	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);

	if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0435 Adapter failed "
				"to get Option ROM version status x%x\n.", rc);
		mempool_free(pmb, phba->mbox_mem_pool);
	}

	return 0;
}

/**
 * lpfc_hba_down_prep: Perform lpfc uninitialization prior to HBA reset.
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine will do LPFC uninitialization before the HBA is reset when
 * bringing down the SLI Layer.
 *
 * Return codes
 *   0 - success.
 *   Any other value - error.
 **/
int
lpfc_hba_down_prep(struct lpfc_hba *phba)
{
	struct lpfc_vport **vports;
	int i;
	/* Disable interrupts */
	writel(0, phba->HCregaddr);
	readl(phba->HCregaddr); /* flush */

	if (phba->pport->load_flag & FC_UNLOADING)
		lpfc_cleanup_discovery_resources(phba->pport);
	else {
		vports = lpfc_create_vport_work_array(phba);
		if (vports != NULL)
			for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
				lpfc_cleanup_discovery_resources(vports[i]);
		lpfc_destroy_vport_work_array(phba, vports);
	}
	return 0;
}

/**
 * lpfc_hba_down_post: Perform lpfc uninitialization after HBA reset.
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine will do uninitialization after the HBA is reset when bring
 * down the SLI Layer.
 *
 * Return codes
 *   0 - sucess.
 *   Any other value - error.
 **/
int
lpfc_hba_down_post(struct lpfc_hba *phba)
{
	struct lpfc_sli *psli = &phba->sli;
	struct lpfc_sli_ring *pring;
	struct lpfc_dmabuf *mp, *next_mp;
	struct lpfc_iocbq *iocb;
	IOCB_t *cmd = NULL;
	LIST_HEAD(completions);
	int i;

	if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED)
		lpfc_sli_hbqbuf_free_all(phba);
	else {
		/* Cleanup preposted buffers on the ELS ring */
		pring = &psli->ring[LPFC_ELS_RING];
		list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
			list_del(&mp->list);
			pring->postbufq_cnt--;
			lpfc_mbuf_free(phba, mp->virt, mp->phys);
			kfree(mp);
		}
	}

	spin_lock_irq(&phba->hbalock);
	for (i = 0; i < psli->num_rings; i++) {
		pring = &psli->ring[i];

		/* At this point in time the HBA is either reset or DOA. Either
		 * way, nothing should be on txcmplq as it will NEVER complete.
		 */
		list_splice_init(&pring->txcmplq, &completions);
		pring->txcmplq_cnt = 0;
		spin_unlock_irq(&phba->hbalock);

		while (!list_empty(&completions)) {
			iocb = list_get_first(&completions, struct lpfc_iocbq,
				list);
			cmd = &iocb->iocb;
			list_del_init(&iocb->list);

			if (!iocb->iocb_cmpl)
				lpfc_sli_release_iocbq(phba, iocb);
			else {
				cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
				cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
				(iocb->iocb_cmpl) (phba, iocb, iocb);
			}
		}

		lpfc_sli_abort_iocb_ring(phba, pring);
		spin_lock_irq(&phba->hbalock);
	}
	spin_unlock_irq(&phba->hbalock);

	return 0;
}

/**
 * lpfc_hb_timeout: The HBA-timer timeout handler.
 * @ptr: unsigned long holds the pointer to lpfc hba data structure.
 *
 * This is the HBA-timer timeout handler registered to the lpfc driver. When
 * this timer fires, a HBA timeout event shall be posted to the lpfc driver
 * work-port-events bitmap and the worker thread is notified. This timeout
 * event will be used by the worker thread to invoke the actual timeout
 * handler routine, lpfc_hb_timeout_handler. Any periodical operations will
 * be performed in the timeout handler and the HBA timeout event bit shall
 * be cleared by the worker thread after it has taken the event bitmap out.
 **/
static void
lpfc_hb_timeout(unsigned long ptr)
{
	struct lpfc_hba *phba;
	uint32_t tmo_posted;
	unsigned long iflag;

	phba = (struct lpfc_hba *)ptr;

	/* Check for heart beat timeout conditions */
	spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
	tmo_posted = phba->pport->work_port_events & WORKER_HB_TMO;
	if (!tmo_posted)
		phba->pport->work_port_events |= WORKER_HB_TMO;
	spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);

	/* Tell the worker thread there is work to do */
	if (!tmo_posted)
		lpfc_worker_wake_up(phba);
	return;
}

/**
 * lpfc_hb_mbox_cmpl: The lpfc heart-beat mailbox command callback function.
 * @phba: pointer to lpfc hba data structure.
 * @pmboxq: pointer to the driver internal queue element for mailbox command.
 *
 * This is the callback function to the lpfc heart-beat mailbox command.
 * If configured, the lpfc driver issues the heart-beat mailbox command to
 * the HBA every LPFC_HB_MBOX_INTERVAL (current 5) seconds. At the time the
 * heart-beat mailbox command is issued, the driver shall set up heart-beat
 * timeout timer to LPFC_HB_MBOX_TIMEOUT (current 30) seconds and marks
 * heart-beat outstanding state. Once the mailbox command comes back and
 * no error conditions detected, the heart-beat mailbox command timer is
 * reset to LPFC_HB_MBOX_INTERVAL seconds and the heart-beat outstanding
 * state is cleared for the next heart-beat. If the timer expired with the
 * heart-beat outstanding state set, the driver will put the HBA offline.
 **/
static void
lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
{
	unsigned long drvr_flag;

	spin_lock_irqsave(&phba->hbalock, drvr_flag);
	phba->hb_outstanding = 0;
	spin_unlock_irqrestore(&phba->hbalock, drvr_flag);

	/* Check and reset heart-beat timer is necessary */
	mempool_free(pmboxq, phba->mbox_mem_pool);
	if (!(phba->pport->fc_flag & FC_OFFLINE_MODE) &&
		!(phba->link_state == LPFC_HBA_ERROR) &&
		!(phba->pport->load_flag & FC_UNLOADING))
		mod_timer(&phba->hb_tmofunc,
			jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
	return;
}

/**
 * lpfc_hb_timeout_handler: The HBA-timer timeout handler.
 * @phba: pointer to lpfc hba data structure.
 *
 * This is the actual HBA-timer timeout handler to be invoked by the worker
 * thread whenever the HBA timer fired and HBA-timeout event posted. This
 * handler performs any periodic operations needed for the device. If such
 * periodic event has already been attended to either in the interrupt handler
 * or by processing slow-ring or fast-ring events within the HBA-timer
 * timeout window (LPFC_HB_MBOX_INTERVAL), this handler just simply resets
 * the timer for the next timeout period. If lpfc heart-beat mailbox command
 * is configured and there is no heart-beat mailbox command outstanding, a
 * heart-beat mailbox is issued and timer set properly. Otherwise, if there
 * has been a heart-beat mailbox command outstanding, the HBA shall be put
 * to offline.
 **/
void
lpfc_hb_timeout_handler(struct lpfc_hba *phba)
{
	LPFC_MBOXQ_t *pmboxq;
	struct lpfc_dmabuf *buf_ptr;
	int retval;
	struct lpfc_sli *psli = &phba->sli;
	LIST_HEAD(completions);

	if ((phba->link_state == LPFC_HBA_ERROR) ||
		(phba->pport->load_flag & FC_UNLOADING) ||
		(phba->pport->fc_flag & FC_OFFLINE_MODE))
		return;

	spin_lock_irq(&phba->pport->work_port_lock);

	if (time_after(phba->last_completion_time + LPFC_HB_MBOX_INTERVAL * HZ,
		jiffies)) {
		spin_unlock_irq(&phba->pport->work_port_lock);
		if (!phba->hb_outstanding)
			mod_timer(&phba->hb_tmofunc,
				jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
		else
			mod_timer(&phba->hb_tmofunc,
				jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
		return;
	}
	spin_unlock_irq(&phba->pport->work_port_lock);

	if (phba->elsbuf_cnt &&
		(phba->elsbuf_cnt == phba->elsbuf_prev_cnt)) {
		spin_lock_irq(&phba->hbalock);
		list_splice_init(&phba->elsbuf, &completions);
		phba->elsbuf_cnt = 0;
		phba->elsbuf_prev_cnt = 0;
		spin_unlock_irq(&phba->hbalock);

		while (!list_empty(&completions)) {
			list_remove_head(&completions, buf_ptr,
				struct lpfc_dmabuf, list);
			lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
			kfree(buf_ptr);
		}
	}
	phba->elsbuf_prev_cnt = phba->elsbuf_cnt;

	/* If there is no heart beat outstanding, issue a heartbeat command */
	if (phba->cfg_enable_hba_heartbeat) {
		if (!phba->hb_outstanding) {
			pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
			if (!pmboxq) {
				mod_timer(&phba->hb_tmofunc,
					  jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
				return;
			}

			lpfc_heart_beat(phba, pmboxq);
			pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
			pmboxq->vport = phba->pport;
			retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);

			if (retval != MBX_BUSY && retval != MBX_SUCCESS) {
				mempool_free(pmboxq, phba->mbox_mem_pool);
				mod_timer(&phba->hb_tmofunc,
					  jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
				return;
			}
			mod_timer(&phba->hb_tmofunc,
				  jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
			phba->hb_outstanding = 1;
			return;
		} else {
			/*
			* If heart beat timeout called with hb_outstanding set
			* we need to take the HBA offline.
			*/
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0459 Adapter heartbeat failure, "
					"taking this port offline.\n");

			spin_lock_irq(&phba->hbalock);
			psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
			spin_unlock_irq(&phba->hbalock);

			lpfc_offline_prep(phba);
			lpfc_offline(phba);
			lpfc_unblock_mgmt_io(phba);
			phba->link_state = LPFC_HBA_ERROR;
			lpfc_hba_down_post(phba);
		}
	}
}

/**
 * lpfc_offline_eratt: Bring lpfc offline on hardware error attention.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is called to bring the HBA offline when HBA hardware error
 * other than Port Error 6 has been detected.
 **/
static void
lpfc_offline_eratt(struct lpfc_hba *phba)
{
	struct lpfc_sli   *psli = &phba->sli;

	spin_lock_irq(&phba->hbalock);
	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
	spin_unlock_irq(&phba->hbalock);
	lpfc_offline_prep(phba);

	lpfc_offline(phba);
	lpfc_reset_barrier(phba);
	lpfc_sli_brdreset(phba);
	lpfc_hba_down_post(phba);
	lpfc_sli_brdready(phba, HS_MBRDY);
	lpfc_unblock_mgmt_io(phba);
	phba->link_state = LPFC_HBA_ERROR;
	return;
}

/**
 * lpfc_handle_eratt: The HBA hardware error handler.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to handle the following HBA hardware error
 * conditions:
 * 1 - HBA error attention interrupt
 * 2 - DMA ring index out of range
 * 3 - Mailbox command came back as unknown
 **/
void
lpfc_handle_eratt(struct lpfc_hba *phba)
{
	struct lpfc_vport *vport = phba->pport;
	struct lpfc_sli   *psli = &phba->sli;
	struct lpfc_sli_ring  *pring;
	uint32_t event_data;
	unsigned long temperature;
	struct temp_event temp_event_data;
	struct Scsi_Host  *shost;
	struct lpfc_board_event_header board_event;

	/* If the pci channel is offline, ignore possible errors,
	 * since we cannot communicate with the pci card anyway. */
	if (pci_channel_offline(phba->pcidev))
		return;
	/* If resets are disabled then leave the HBA alone and return */
	if (!phba->cfg_enable_hba_reset)
		return;

	/* Send an internal error event to mgmt application */
	board_event.event_type = FC_REG_BOARD_EVENT;
	board_event.subcategory = LPFC_EVENT_PORTINTERR;
	shost = lpfc_shost_from_vport(phba->pport);
	fc_host_post_vendor_event(shost, fc_get_event_number(),
				  sizeof(board_event),
				  (char *) &board_event,
				  LPFC_NL_VENDOR_ID);

	if (phba->work_hs & HS_FFER6) {
		/* Re-establishing Link */
		lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
				"1301 Re-establishing Link "
				"Data: x%x x%x x%x\n",
				phba->work_hs,
				phba->work_status[0], phba->work_status[1]);

		spin_lock_irq(&phba->hbalock);
		psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
		spin_unlock_irq(&phba->hbalock);

		/*
		* Firmware stops when it triggled erratt with HS_FFER6.
		* That could cause the I/Os dropped by the firmware.
		* Error iocb (I/O) on txcmplq and let the SCSI layer
		* retry it after re-establishing link.
		*/
		pring = &psli->ring[psli->fcp_ring];
		lpfc_sli_abort_iocb_ring(phba, pring);

		/*
		 * There was a firmware error.  Take the hba offline and then
		 * attempt to restart it.
		 */
		lpfc_offline_prep(phba);
		lpfc_offline(phba);
		lpfc_sli_brdrestart(phba);
		if (lpfc_online(phba) == 0) {	/* Initialize the HBA */
			lpfc_unblock_mgmt_io(phba);
			return;
		}
		lpfc_unblock_mgmt_io(phba);
	} else if (phba->work_hs & HS_CRIT_TEMP) {
		temperature = readl(phba->MBslimaddr + TEMPERATURE_OFFSET);
		temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
		temp_event_data.event_code = LPFC_CRIT_TEMP;
		temp_event_data.data = (uint32_t)temperature;

		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0406 Adapter maximum temperature exceeded "
				"(%ld), taking this port offline "
				"Data: x%x x%x x%x\n",
				temperature, phba->work_hs,
				phba->work_status[0], phba->work_status[1]);

		shost = lpfc_shost_from_vport(phba->pport);
		fc_host_post_vendor_event(shost, fc_get_event_number(),
					  sizeof(temp_event_data),
					  (char *) &temp_event_data,
					  SCSI_NL_VID_TYPE_PCI
					  | PCI_VENDOR_ID_EMULEX);

		spin_lock_irq(&phba->hbalock);
		phba->over_temp_state = HBA_OVER_TEMP;
		spin_unlock_irq(&phba->hbalock);
		lpfc_offline_eratt(phba);

	} else {
		/* The if clause above forces this code path when the status
		 * failure is a value other than FFER6. Do not call the offline
		 * twice. This is the adapter hardware error path.
		 */
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0457 Adapter Hardware Error "
				"Data: x%x x%x x%x\n",
				phba->work_hs,
				phba->work_status[0], phba->work_status[1]);

		event_data = FC_REG_DUMP_EVENT;
		shost = lpfc_shost_from_vport(vport);
		fc_host_post_vendor_event(shost, fc_get_event_number(),
				sizeof(event_data), (char *) &event_data,
				SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);

		lpfc_offline_eratt(phba);
	}
	return;
}

/**
 * lpfc_handle_latt: The HBA link event handler.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked from the worker thread to handle a HBA host
 * attention link event.
 **/
void
lpfc_handle_latt(struct lpfc_hba *phba)
{
	struct lpfc_vport *vport = phba->pport;
	struct lpfc_sli   *psli = &phba->sli;
	LPFC_MBOXQ_t *pmb;
	volatile uint32_t control;
	struct lpfc_dmabuf *mp;
	int rc = 0;

	pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	if (!pmb) {
		rc = 1;
		goto lpfc_handle_latt_err_exit;
	}

	mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
	if (!mp) {
		rc = 2;
		goto lpfc_handle_latt_free_pmb;
	}

	mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
	if (!mp->virt) {
		rc = 3;
		goto lpfc_handle_latt_free_mp;
	}

	/* Cleanup any outstanding ELS commands */
	lpfc_els_flush_all_cmd(phba);

	psli->slistat.link_event++;
	lpfc_read_la(phba, pmb, mp);
	pmb->mbox_cmpl = lpfc_mbx_cmpl_read_la;
	pmb->vport = vport;
	/* Block ELS IOCBs until we have processed this mbox command */
	phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
	rc = lpfc_sli_issue_mbox (phba, pmb, MBX_NOWAIT);
	if (rc == MBX_NOT_FINISHED) {
		rc = 4;
		goto lpfc_handle_latt_free_mbuf;
	}

	/* Clear Link Attention in HA REG */
	spin_lock_irq(&phba->hbalock);
	writel(HA_LATT, phba->HAregaddr);
	readl(phba->HAregaddr); /* flush */
	spin_unlock_irq(&phba->hbalock);

	return;

lpfc_handle_latt_free_mbuf:
	phba->sli.ring[LPFC_ELS_RING].flag &= ~LPFC_STOP_IOCB_EVENT;
	lpfc_mbuf_free(phba, mp->virt, mp->phys);
lpfc_handle_latt_free_mp:
	kfree(mp);
lpfc_handle_latt_free_pmb:
	mempool_free(pmb, phba->mbox_mem_pool);
lpfc_handle_latt_err_exit:
	/* Enable Link attention interrupts */
	spin_lock_irq(&phba->hbalock);
	psli->sli_flag |= LPFC_PROCESS_LA;
	control = readl(phba->HCregaddr);
	control |= HC_LAINT_ENA;
	writel(control, phba->HCregaddr);
	readl(phba->HCregaddr); /* flush */

	/* Clear Link Attention in HA REG */
	writel(HA_LATT, phba->HAregaddr);
	readl(phba->HAregaddr); /* flush */
	spin_unlock_irq(&phba->hbalock);
	lpfc_linkdown(phba);
	phba->link_state = LPFC_HBA_ERROR;

	lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
		     "0300 LATT: Cannot issue READ_LA: Data:%d\n", rc);

	return;
}

/**
 * lpfc_parse_vpd: Parse VPD (Vital Product Data).
 * @phba: pointer to lpfc hba data structure.
 * @vpd: pointer to the vital product data.
 * @len: length of the vital product data in bytes.
 *
 * This routine parses the Vital Product Data (VPD). The VPD is treated as
 * an array of characters. In this routine, the ModelName, ProgramType, and
 * ModelDesc, etc. fields of the phba data structure will be populated.
 *
 * Return codes
 *   0 - pointer to the VPD passed in is NULL
 *   1 - success
 **/
static int
lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
{
	uint8_t lenlo, lenhi;
	int Length;
	int i, j;
	int finished = 0;
	int index = 0;

	if (!vpd)
		return 0;

	/* Vital Product */
	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"0455 Vital Product Data: x%x x%x x%x x%x\n",
			(uint32_t) vpd[0], (uint32_t) vpd[1], (uint32_t) vpd[2],
			(uint32_t) vpd[3]);
	while (!finished && (index < (len - 4))) {
		switch (vpd[index]) {
		case 0x82:
		case 0x91:
			index += 1;
			lenlo = vpd[index];
			index += 1;
			lenhi = vpd[index];
			index += 1;
			i = ((((unsigned short)lenhi) << 8) + lenlo);
			index += i;
			break;
		case 0x90:
			index += 1;
			lenlo = vpd[index];
			index += 1;
			lenhi = vpd[index];
			index += 1;
			Length = ((((unsigned short)lenhi) << 8) + lenlo);
			if (Length > len - index)
				Length = len - index;
			while (Length > 0) {
			/* Look for Serial Number */
			if ((vpd[index] == 'S') && (vpd[index+1] == 'N')) {
				index += 2;
				i = vpd[index];
				index += 1;
				j = 0;
				Length -= (3+i);
				while(i--) {
					phba->SerialNumber[j++] = vpd[index++];
					if (j == 31)
						break;
				}
				phba->SerialNumber[j] = 0;
				continue;
			}
			else if ((vpd[index] == 'V') && (vpd[index+1] == '1')) {
				phba->vpd_flag |= VPD_MODEL_DESC;
				index += 2;
				i = vpd[index];
				index += 1;
				j = 0;
				Length -= (3+i);
				while(i--) {
					phba->ModelDesc[j++] = vpd[index++];
					if (j == 255)
						break;
				}
				phba->ModelDesc[j] = 0;
				continue;
			}
			else if ((vpd[index] == 'V') && (vpd[index+1] == '2')) {
				phba->vpd_flag |= VPD_MODEL_NAME;
				index += 2;
				i = vpd[index];
				index += 1;
				j = 0;
				Length -= (3+i);
				while(i--) {
					phba->ModelName[j++] = vpd[index++];
					if (j == 79)
						break;
				}
				phba->ModelName[j] = 0;
				continue;
			}
			else if ((vpd[index] == 'V') && (vpd[index+1] == '3')) {
				phba->vpd_flag |= VPD_PROGRAM_TYPE;
				index += 2;
				i = vpd[index];
				index += 1;
				j = 0;
				Length -= (3+i);
				while(i--) {
					phba->ProgramType[j++] = vpd[index++];
					if (j == 255)
						break;
				}
				phba->ProgramType[j] = 0;
				continue;
			}
			else if ((vpd[index] == 'V') && (vpd[index+1] == '4')) {
				phba->vpd_flag |= VPD_PORT;
				index += 2;
				i = vpd[index];
				index += 1;
				j = 0;
				Length -= (3+i);
				while(i--) {
				phba->Port[j++] = vpd[index++];
				if (j == 19)
					break;
				}
				phba->Port[j] = 0;
				continue;
			}
			else {
				index += 2;
				i = vpd[index];
				index += 1;
				index += i;
				Length -= (3 + i);
			}
		}
		finished = 0;
		break;
		case 0x78:
			finished = 1;
			break;
		default:
			index ++;
			break;
		}
	}

	return(1);
}

/**
 * lpfc_get_hba_model_desc: Retrieve HBA device model name and description.
 * @phba: pointer to lpfc hba data structure.
 * @mdp: pointer to the data structure to hold the derived model name.
 * @descp: pointer to the data structure to hold the derived description.
 *
 * This routine retrieves HBA's description based on its registered PCI device
 * ID. The @descp passed into this function points to an array of 256 chars. It
 * shall be returned with the model name, maximum speed, and the host bus type.
 * The @mdp passed into this function points to an array of 80 chars. When the
 * function returns, the @mdp will be filled with the model name.
 **/
static void
lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
{
	lpfc_vpd_t *vp;
	uint16_t dev_id = phba->pcidev->device;
	int max_speed;
	int GE = 0;
	struct {
		char * name;
		int    max_speed;
		char * bus;
	} m = {"<Unknown>", 0, ""};

	if (mdp && mdp[0] != '\0'
		&& descp && descp[0] != '\0')
		return;

	if (phba->lmt & LMT_10Gb)
		max_speed = 10;
	else if (phba->lmt & LMT_8Gb)
		max_speed = 8;
	else if (phba->lmt & LMT_4Gb)
		max_speed = 4;
	else if (phba->lmt & LMT_2Gb)
		max_speed = 2;
	else
		max_speed = 1;

	vp = &phba->vpd;

	switch (dev_id) {
	case PCI_DEVICE_ID_FIREFLY:
		m = (typeof(m)){"LP6000", max_speed, "PCI"};
		break;
	case PCI_DEVICE_ID_SUPERFLY:
		if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
			m = (typeof(m)){"LP7000", max_speed,  "PCI"};
		else
			m = (typeof(m)){"LP7000E", max_speed, "PCI"};
		break;
	case PCI_DEVICE_ID_DRAGONFLY:
		m = (typeof(m)){"LP8000", max_speed, "PCI"};
		break;
	case PCI_DEVICE_ID_CENTAUR:
		if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
			m = (typeof(m)){"LP9002", max_speed, "PCI"};
		else
			m = (typeof(m)){"LP9000", max_speed, "PCI"};
		break;
	case PCI_DEVICE_ID_RFLY:
		m = (typeof(m)){"LP952", max_speed, "PCI"};
		break;
	case PCI_DEVICE_ID_PEGASUS:
		m = (typeof(m)){"LP9802", max_speed, "PCI-X"};
		break;
	case PCI_DEVICE_ID_THOR:
		m = (typeof(m)){"LP10000", max_speed, "PCI-X"};
		break;
	case PCI_DEVICE_ID_VIPER:
		m = (typeof(m)){"LPX1000", max_speed,  "PCI-X"};
		break;
	case PCI_DEVICE_ID_PFLY:
		m = (typeof(m)){"LP982", max_speed, "PCI-X"};
		break;
	case PCI_DEVICE_ID_TFLY:
		m = (typeof(m)){"LP1050", max_speed, "PCI-X"};
		break;
	case PCI_DEVICE_ID_HELIOS:
		m = (typeof(m)){"LP11000", max_speed, "PCI-X2"};
		break;
	case PCI_DEVICE_ID_HELIOS_SCSP:
		m = (typeof(m)){"LP11000-SP", max_speed, "PCI-X2"};
		break;
	case PCI_DEVICE_ID_HELIOS_DCSP:
		m = (typeof(m)){"LP11002-SP", max_speed, "PCI-X2"};
		break;
	case PCI_DEVICE_ID_NEPTUNE:
		m = (typeof(m)){"LPe1000", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_NEPTUNE_SCSP:
		m = (typeof(m)){"LPe1000-SP", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_NEPTUNE_DCSP:
		m = (typeof(m)){"LPe1002-SP", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_BMID:
		m = (typeof(m)){"LP1150", max_speed, "PCI-X2"};
		break;
	case PCI_DEVICE_ID_BSMB:
		m = (typeof(m)){"LP111", max_speed, "PCI-X2"};
		break;
	case PCI_DEVICE_ID_ZEPHYR:
		m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_ZEPHYR_SCSP:
		m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_ZEPHYR_DCSP:
		m = (typeof(m)){"LPe11002-SP", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_ZMID:
		m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_ZSMB:
		m = (typeof(m)){"LPe111", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_LP101:
		m = (typeof(m)){"LP101", max_speed, "PCI-X"};
		break;
	case PCI_DEVICE_ID_LP10000S:
		m = (typeof(m)){"LP10000-S", max_speed, "PCI"};
		break;
	case PCI_DEVICE_ID_LP11000S:
		m = (typeof(m)){"LP11000-S", max_speed,
			"PCI-X2"};
		break;
	case PCI_DEVICE_ID_LPE11000S:
		m = (typeof(m)){"LPe11000-S", max_speed,
			"PCIe"};
		break;
	case PCI_DEVICE_ID_SAT:
		m = (typeof(m)){"LPe12000", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_SAT_MID:
		m = (typeof(m)){"LPe1250", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_SAT_SMB:
		m = (typeof(m)){"LPe121", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_SAT_DCSP:
		m = (typeof(m)){"LPe12002-SP", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_SAT_SCSP:
		m = (typeof(m)){"LPe12000-SP", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_SAT_S:
		m = (typeof(m)){"LPe12000-S", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_HORNET:
		m = (typeof(m)){"LP21000", max_speed, "PCIe"};
		GE = 1;
		break;
	case PCI_DEVICE_ID_PROTEUS_VF:
		m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
		break;
	case PCI_DEVICE_ID_PROTEUS_PF:
		m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
		break;
	case PCI_DEVICE_ID_PROTEUS_S:
		m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
		break;
	default:
		m = (typeof(m)){ NULL };
		break;
	}

	if (mdp && mdp[0] == '\0')
		snprintf(mdp, 79,"%s", m.name);
	if (descp && descp[0] == '\0')
		snprintf(descp, 255,
			"Emulex %s %d%s %s %s",
			m.name, m.max_speed,
			(GE) ? "GE" : "Gb",
			m.bus,
			(GE) ? "FCoE Adapter" : "Fibre Channel Adapter");
}

/**
 * lpfc_post_buffer: Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring.
 * @phba: pointer to lpfc hba data structure.
 * @pring: pointer to a IOCB ring.
 * @cnt: the number of IOCBs to be posted to the IOCB ring.
 *
 * This routine posts a given number of IOCBs with the associated DMA buffer
 * descriptors specified by the cnt argument to the given IOCB ring.
 *
 * Return codes
 *   The number of IOCBs NOT able to be posted to the IOCB ring.
 **/
int
lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
{
	IOCB_t *icmd;
	struct lpfc_iocbq *iocb;
	struct lpfc_dmabuf *mp1, *mp2;

	cnt += pring->missbufcnt;

	/* While there are buffers to post */
	while (cnt > 0) {
		/* Allocate buffer for  command iocb */
		iocb = lpfc_sli_get_iocbq(phba);
		if (iocb == NULL) {
			pring->missbufcnt = cnt;
			return cnt;
		}
		icmd = &iocb->iocb;

		/* 2 buffers can be posted per command */
		/* Allocate buffer to post */
		mp1 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
		if (mp1)
		    mp1->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &mp1->phys);
		if (!mp1 || !mp1->virt) {
			kfree(mp1);
			lpfc_sli_release_iocbq(phba, iocb);
			pring->missbufcnt = cnt;
			return cnt;
		}

		INIT_LIST_HEAD(&mp1->list);
		/* Allocate buffer to post */
		if (cnt > 1) {
			mp2 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
			if (mp2)
				mp2->virt = lpfc_mbuf_alloc(phba, MEM_PRI,
							    &mp2->phys);
			if (!mp2 || !mp2->virt) {
				kfree(mp2);
				lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
				kfree(mp1);
				lpfc_sli_release_iocbq(phba, iocb);
				pring->missbufcnt = cnt;
				return cnt;
			}

			INIT_LIST_HEAD(&mp2->list);
		} else {
			mp2 = NULL;
		}

		icmd->un.cont64[0].addrHigh = putPaddrHigh(mp1->phys);
		icmd->un.cont64[0].addrLow = putPaddrLow(mp1->phys);
		icmd->un.cont64[0].tus.f.bdeSize = FCELSSIZE;
		icmd->ulpBdeCount = 1;
		cnt--;
		if (mp2) {
			icmd->un.cont64[1].addrHigh = putPaddrHigh(mp2->phys);
			icmd->un.cont64[1].addrLow = putPaddrLow(mp2->phys);
			icmd->un.cont64[1].tus.f.bdeSize = FCELSSIZE;
			cnt--;
			icmd->ulpBdeCount = 2;
		}

		icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
		icmd->ulpLe = 1;

		if (lpfc_sli_issue_iocb(phba, pring, iocb, 0) == IOCB_ERROR) {
			lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
			kfree(mp1);
			cnt++;
			if (mp2) {
				lpfc_mbuf_free(phba, mp2->virt, mp2->phys);
				kfree(mp2);
				cnt++;
			}
			lpfc_sli_release_iocbq(phba, iocb);
			pring->missbufcnt = cnt;
			return cnt;
		}
		lpfc_sli_ringpostbuf_put(phba, pring, mp1);
		if (mp2)
			lpfc_sli_ringpostbuf_put(phba, pring, mp2);
	}
	pring->missbufcnt = 0;
	return 0;
}

/**
 * lpfc_post_rcv_buf: Post the initial receive IOCB buffers to ELS ring.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine posts initial receive IOCB buffers to the ELS ring. The
 * current number of initial IOCB buffers specified by LPFC_BUF_RING0 is
 * set to 64 IOCBs.
 *
 * Return codes
 *   0 - success (currently always success)
 **/
static int
lpfc_post_rcv_buf(struct lpfc_hba *phba)
{
	struct lpfc_sli *psli = &phba->sli;

	/* Ring 0, ELS / CT buffers */
	lpfc_post_buffer(phba, &psli->ring[LPFC_ELS_RING], LPFC_BUF_RING0);
	/* Ring 2 - FCP no buffers needed */

	return 0;
}

#define S(N,V) (((V)<<(N))|((V)>>(32-(N))))

/**
 * lpfc_sha_init: Set up initial array of hash table entries.
 * @HashResultPointer: pointer to an array as hash table.
 *
 * This routine sets up the initial values to the array of hash table entries
 * for the LC HBAs.
 **/
static void
lpfc_sha_init(uint32_t * HashResultPointer)
{
	HashResultPointer[0] = 0x67452301;
	HashResultPointer[1] = 0xEFCDAB89;
	HashResultPointer[2] = 0x98BADCFE;
	HashResultPointer[3] = 0x10325476;
	HashResultPointer[4] = 0xC3D2E1F0;
}

/**
 * lpfc_sha_iterate: Iterate initial hash table with the working hash table.
 * @HashResultPointer: pointer to an initial/result hash table.
 * @HashWorkingPointer: pointer to an working hash table.
 *
 * This routine iterates an initial hash table pointed by @HashResultPointer
 * with the values from the working hash table pointeed by @HashWorkingPointer.
 * The results are putting back to the initial hash table, returned through
 * the @HashResultPointer as the result hash table.
 **/
static void
lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer)
{
	int t;
	uint32_t TEMP;
	uint32_t A, B, C, D, E;
	t = 16;
	do {
		HashWorkingPointer[t] =
		    S(1,
		      HashWorkingPointer[t - 3] ^ HashWorkingPointer[t -
								     8] ^
		      HashWorkingPointer[t - 14] ^ HashWorkingPointer[t - 16]);
	} while (++t <= 79);
	t = 0;
	A = HashResultPointer[0];
	B = HashResultPointer[1];
	C = HashResultPointer[2];
	D = HashResultPointer[3];
	E = HashResultPointer[4];

	do {
		if (t < 20) {
			TEMP = ((B & C) | ((~B) & D)) + 0x5A827999;
		} else if (t < 40) {
			TEMP = (B ^ C ^ D) + 0x6ED9EBA1;
		} else if (t < 60) {
			TEMP = ((B & C) | (B & D) | (C & D)) + 0x8F1BBCDC;
		} else {
			TEMP = (B ^ C ^ D) + 0xCA62C1D6;
		}
		TEMP += S(5, A) + E + HashWorkingPointer[t];
		E = D;
		D = C;
		C = S(30, B);
		B = A;
		A = TEMP;
	} while (++t <= 79);

	HashResultPointer[0] += A;
	HashResultPointer[1] += B;
	HashResultPointer[2] += C;
	HashResultPointer[3] += D;
	HashResultPointer[4] += E;

}

/**
 * lpfc_challenge_key: Create challenge key based on WWPN of the HBA.
 * @RandomChallenge: pointer to the entry of host challenge random number array.
 * @HashWorking: pointer to the entry of the working hash array.
 *
 * This routine calculates the working hash array referred by @HashWorking
 * from the challenge random numbers associated with the host, referred by
 * @RandomChallenge. The result is put into the entry of the working hash
 * array and returned by reference through @HashWorking.
 **/
static void
lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking)
{
	*HashWorking = (*RandomChallenge ^ *HashWorking);
}

/**
 * lpfc_hba_init: Perform special handling for LC HBA initialization.
 * @phba: pointer to lpfc hba data structure.
 * @hbainit: pointer to an array of unsigned 32-bit integers.
 *
 * This routine performs the special handling for LC HBA initialization.
 **/
void
lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit)
{
	int t;
	uint32_t *HashWorking;
	uint32_t *pwwnn = (uint32_t *) phba->wwnn;

	HashWorking = kcalloc(80, sizeof(uint32_t), GFP_KERNEL);
	if (!HashWorking)
		return;

	HashWorking[0] = HashWorking[78] = *pwwnn++;
	HashWorking[1] = HashWorking[79] = *pwwnn;

	for (t = 0; t < 7; t++)
		lpfc_challenge_key(phba->RandomData + t, HashWorking + t);

	lpfc_sha_init(hbainit);
	lpfc_sha_iterate(hbainit, HashWorking);
	kfree(HashWorking);
}

/**
 * lpfc_cleanup: Performs vport cleanups before deleting a vport.
 * @vport: pointer to a virtual N_Port data structure.
 *
 * This routine performs the necessary cleanups before deleting the @vport.
 * It invokes the discovery state machine to perform necessary state
 * transitions and to release the ndlps associated with the @vport. Note,
 * the physical port is treated as @vport 0.
 **/
void
lpfc_cleanup(struct lpfc_vport *vport)
{
	struct lpfc_hba   *phba = vport->phba;
	struct lpfc_nodelist *ndlp, *next_ndlp;
	int i = 0;

	if (phba->link_state > LPFC_LINK_DOWN)
		lpfc_port_link_failure(vport);

	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
		if (!NLP_CHK_NODE_ACT(ndlp)) {
			ndlp = lpfc_enable_node(vport, ndlp,
						NLP_STE_UNUSED_NODE);
			if (!ndlp)
				continue;
			spin_lock_irq(&phba->ndlp_lock);
			NLP_SET_FREE_REQ(ndlp);
			spin_unlock_irq(&phba->ndlp_lock);
			/* Trigger the release of the ndlp memory */
			lpfc_nlp_put(ndlp);
			continue;
		}
		spin_lock_irq(&phba->ndlp_lock);
		if (NLP_CHK_FREE_REQ(ndlp)) {
			/* The ndlp should not be in memory free mode already */
			spin_unlock_irq(&phba->ndlp_lock);
			continue;
		} else
			/* Indicate request for freeing ndlp memory */
			NLP_SET_FREE_REQ(ndlp);
		spin_unlock_irq(&phba->ndlp_lock);

		if (vport->port_type != LPFC_PHYSICAL_PORT &&
		    ndlp->nlp_DID == Fabric_DID) {
			/* Just free up ndlp with Fabric_DID for vports */
			lpfc_nlp_put(ndlp);
			continue;
		}

		if (ndlp->nlp_type & NLP_FABRIC)
			lpfc_disc_state_machine(vport, ndlp, NULL,
					NLP_EVT_DEVICE_RECOVERY);

		lpfc_disc_state_machine(vport, ndlp, NULL,
					     NLP_EVT_DEVICE_RM);

	}

	/* At this point, ALL ndlp's should be gone
	 * because of the previous NLP_EVT_DEVICE_RM.
	 * Lets wait for this to happen, if needed.
	 */
	while (!list_empty(&vport->fc_nodes)) {

		if (i++ > 3000) {
			lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
				"0233 Nodelist not empty\n");
			list_for_each_entry_safe(ndlp, next_ndlp,
						&vport->fc_nodes, nlp_listp) {
				lpfc_printf_vlog(ndlp->vport, KERN_ERR,
						LOG_NODE,
						"0282 did:x%x ndlp:x%p "
						"usgmap:x%x refcnt:%d\n",
						ndlp->nlp_DID, (void *)ndlp,
						ndlp->nlp_usg_map,
						atomic_read(
							&ndlp->kref.refcount));
			}
			break;
		}

		/* Wait for any activity on ndlps to settle */
		msleep(10);
	}
	return;
}

/**
 * lpfc_stop_vport_timers: Stop all the timers associated with a vport.
 * @vport: pointer to a virtual N_Port data structure.
 *
 * This routine stops all the timers associated with a @vport. This function
 * is invoked before disabling or deleting a @vport. Note that the physical
 * port is treated as @vport 0.
 **/
void
lpfc_stop_vport_timers(struct lpfc_vport *vport)
{
	del_timer_sync(&vport->els_tmofunc);
	del_timer_sync(&vport->fc_fdmitmo);
	lpfc_can_disctmo(vport);
	return;
}

/**
 * lpfc_stop_phba_timers: Stop all the timers associated with an HBA.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine stops all the timers associated with a HBA. This function is
 * invoked before either putting a HBA offline or unloading the driver.
 **/
static void
lpfc_stop_phba_timers(struct lpfc_hba *phba)
{
	del_timer_sync(&phba->fcp_poll_timer);
	lpfc_stop_vport_timers(phba->pport);
	del_timer_sync(&phba->sli.mbox_tmo);
	del_timer_sync(&phba->fabric_block_timer);
	phba->hb_outstanding = 0;
	del_timer_sync(&phba->hb_tmofunc);
	del_timer_sync(&phba->eratt_poll);
	return;
}

/**
 * lpfc_block_mgmt_io: Mark a HBA's management interface as blocked.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine marks a HBA's management interface as blocked. Once the HBA's
 * management interface is marked as blocked, all the user space access to
 * the HBA, whether they are from sysfs interface or libdfc interface will
 * all be blocked. The HBA is set to block the management interface when the
 * driver prepares the HBA interface for online or offline.
 **/
static void
lpfc_block_mgmt_io(struct lpfc_hba * phba)
{
	unsigned long iflag;

	spin_lock_irqsave(&phba->hbalock, iflag);
	phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO;
	spin_unlock_irqrestore(&phba->hbalock, iflag);
}

/**
 * lpfc_online: Initialize and bring a HBA online.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine initializes the HBA and brings a HBA online. During this
 * process, the management interface is blocked to prevent user space access
 * to the HBA interfering with the driver initialization.
 *
 * Return codes
 *   0 - successful
 *   1 - failed
 **/
int
lpfc_online(struct lpfc_hba *phba)
{
	struct lpfc_vport *vport = phba->pport;
	struct lpfc_vport **vports;
	int i;

	if (!phba)
		return 0;

	if (!(vport->fc_flag & FC_OFFLINE_MODE))
		return 0;

	lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
			"0458 Bring Adapter online\n");

	lpfc_block_mgmt_io(phba);

	if (!lpfc_sli_queue_setup(phba)) {
		lpfc_unblock_mgmt_io(phba);
		return 1;
	}

	if (lpfc_sli_hba_setup(phba)) {	/* Initialize the HBA */
		lpfc_unblock_mgmt_io(phba);
		return 1;
	}

	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL)
		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
			struct Scsi_Host *shost;
			shost = lpfc_shost_from_vport(vports[i]);
			spin_lock_irq(shost->host_lock);
			vports[i]->fc_flag &= ~FC_OFFLINE_MODE;
			if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
				vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
			spin_unlock_irq(shost->host_lock);
		}
		lpfc_destroy_vport_work_array(phba, vports);

	lpfc_unblock_mgmt_io(phba);
	return 0;
}

/**
 * lpfc_unblock_mgmt_io: Mark a HBA's management interface to be not blocked.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine marks a HBA's management interface as not blocked. Once the
 * HBA's management interface is marked as not blocked, all the user space
 * access to the HBA, whether they are from sysfs interface or libdfc
 * interface will be allowed. The HBA is set to block the management interface
 * when the driver prepares the HBA interface for online or offline and then
 * set to unblock the management interface afterwards.
 **/
void
lpfc_unblock_mgmt_io(struct lpfc_hba * phba)
{
	unsigned long iflag;

	spin_lock_irqsave(&phba->hbalock, iflag);
	phba->sli.sli_flag &= ~LPFC_BLOCK_MGMT_IO;
	spin_unlock_irqrestore(&phba->hbalock, iflag);
}

/**
 * lpfc_offline_prep: Prepare a HBA to be brought offline.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to prepare a HBA to be brought offline. It performs
 * unregistration login to all the nodes on all vports and flushes the mailbox
 * queue to make it ready to be brought offline.
 **/
void
lpfc_offline_prep(struct lpfc_hba * phba)
{
	struct lpfc_vport *vport = phba->pport;
	struct lpfc_nodelist  *ndlp, *next_ndlp;
	struct lpfc_vport **vports;
	int i;

	if (vport->fc_flag & FC_OFFLINE_MODE)
		return;

	lpfc_block_mgmt_io(phba);

	lpfc_linkdown(phba);

	/* Issue an unreg_login to all nodes on all vports */
	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL) {
		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
			struct Scsi_Host *shost;

			if (vports[i]->load_flag & FC_UNLOADING)
				continue;
			shost =	lpfc_shost_from_vport(vports[i]);
			list_for_each_entry_safe(ndlp, next_ndlp,
						 &vports[i]->fc_nodes,
						 nlp_listp) {
				if (!NLP_CHK_NODE_ACT(ndlp))
					continue;
				if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
					continue;
				if (ndlp->nlp_type & NLP_FABRIC) {
					lpfc_disc_state_machine(vports[i], ndlp,
						NULL, NLP_EVT_DEVICE_RECOVERY);
					lpfc_disc_state_machine(vports[i], ndlp,
						NULL, NLP_EVT_DEVICE_RM);
				}
				spin_lock_irq(shost->host_lock);
				ndlp->nlp_flag &= ~NLP_NPR_ADISC;
				spin_unlock_irq(shost->host_lock);
				lpfc_unreg_rpi(vports[i], ndlp);
			}
		}
	}
	lpfc_destroy_vport_work_array(phba, vports);

	lpfc_sli_flush_mbox_queue(phba);
}

/**
 * lpfc_offline: Bring a HBA offline.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine actually brings a HBA offline. It stops all the timers
 * associated with the HBA, brings down the SLI layer, and eventually
 * marks the HBA as in offline state for the upper layer protocol.
 **/
void
lpfc_offline(struct lpfc_hba *phba)
{
	struct Scsi_Host  *shost;
	struct lpfc_vport **vports;
	int i;

	if (phba->pport->fc_flag & FC_OFFLINE_MODE)
		return;

	/* stop all timers associated with this hba */
	lpfc_stop_phba_timers(phba);
	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL)
		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
			lpfc_stop_vport_timers(vports[i]);
	lpfc_destroy_vport_work_array(phba, vports);
	lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
			"0460 Bring Adapter offline\n");
	/* Bring down the SLI Layer and cleanup.  The HBA is offline
	   now.  */
	lpfc_sli_hba_down(phba);
	spin_lock_irq(&phba->hbalock);
	phba->work_ha = 0;
	spin_unlock_irq(&phba->hbalock);
	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL)
		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
			shost = lpfc_shost_from_vport(vports[i]);
			spin_lock_irq(shost->host_lock);
			vports[i]->work_port_events = 0;
			vports[i]->fc_flag |= FC_OFFLINE_MODE;
			spin_unlock_irq(shost->host_lock);
		}
	lpfc_destroy_vport_work_array(phba, vports);
}

/**
 * lpfc_scsi_free: Free all the SCSI buffers and IOCBs from driver lists.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is to free all the SCSI buffers and IOCBs from the driver
 * list back to kernel. It is called from lpfc_pci_remove_one to free
 * the internal resources before the device is removed from the system.
 *
 * Return codes
 *   0 - successful (for now, it always returns 0)
 **/
static int
lpfc_scsi_free(struct lpfc_hba *phba)
{
	struct lpfc_scsi_buf *sb, *sb_next;
	struct lpfc_iocbq *io, *io_next;

	spin_lock_irq(&phba->hbalock);
	/* Release all the lpfc_scsi_bufs maintained by this host. */
	list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
		list_del(&sb->list);
		pci_pool_free(phba->lpfc_scsi_dma_buf_pool, sb->data,
			      sb->dma_handle);
		kfree(sb);
		phba->total_scsi_bufs--;
	}

	/* Release all the lpfc_iocbq entries maintained by this host. */
	list_for_each_entry_safe(io, io_next, &phba->lpfc_iocb_list, list) {
		list_del(&io->list);
		kfree(io);
		phba->total_iocbq_bufs--;
	}

	spin_unlock_irq(&phba->hbalock);

	return 0;
}

/**
 * lpfc_create_port: Create an FC port.
 * @phba: pointer to lpfc hba data structure.
 * @instance: a unique integer ID to this FC port.
 * @dev: pointer to the device data structure.
 *
 * This routine creates a FC port for the upper layer protocol. The FC port
 * can be created on top of either a physical port or a virtual port provided
 * by the HBA. This routine also allocates a SCSI host data structure (shost)
 * and associates the FC port created before adding the shost into the SCSI
 * layer.
 *
 * Return codes
 *   @vport - pointer to the virtual N_Port data structure.
 *   NULL - port create failed.
 **/
struct lpfc_vport *
lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
{
	struct lpfc_vport *vport;
	struct Scsi_Host  *shost;
	int error = 0;

	if (dev != &phba->pcidev->dev)
		shost = scsi_host_alloc(&lpfc_vport_template,
					sizeof(struct lpfc_vport));
	else
		shost = scsi_host_alloc(&lpfc_template,
					sizeof(struct lpfc_vport));
	if (!shost)
		goto out;

	vport = (struct lpfc_vport *) shost->hostdata;
	vport->phba = phba;
	vport->load_flag |= FC_LOADING;
	vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
	vport->fc_rscn_flush = 0;

	lpfc_get_vport_cfgparam(vport);
	shost->unique_id = instance;
	shost->max_id = LPFC_MAX_TARGET;
	shost->max_lun = vport->cfg_max_luns;
	shost->this_id = -1;
	shost->max_cmd_len = 16;
	/*
	 * Set initial can_queue value since 0 is no longer supported and
	 * scsi_add_host will fail. This will be adjusted later based on the
	 * max xri value determined in hba setup.
	 */
	shost->can_queue = phba->cfg_hba_queue_depth - 10;
	if (dev != &phba->pcidev->dev) {
		shost->transportt = lpfc_vport_transport_template;
		vport->port_type = LPFC_NPIV_PORT;
	} else {
		shost->transportt = lpfc_transport_template;
		vport->port_type = LPFC_PHYSICAL_PORT;
	}

	/* Initialize all internally managed lists. */
	INIT_LIST_HEAD(&vport->fc_nodes);
	spin_lock_init(&vport->work_port_lock);

	init_timer(&vport->fc_disctmo);
	vport->fc_disctmo.function = lpfc_disc_timeout;
	vport->fc_disctmo.data = (unsigned long)vport;

	init_timer(&vport->fc_fdmitmo);
	vport->fc_fdmitmo.function = lpfc_fdmi_tmo;
	vport->fc_fdmitmo.data = (unsigned long)vport;

	init_timer(&vport->els_tmofunc);
	vport->els_tmofunc.function = lpfc_els_timeout;
	vport->els_tmofunc.data = (unsigned long)vport;

	error = scsi_add_host(shost, dev);
	if (error)
		goto out_put_shost;

	spin_lock_irq(&phba->hbalock);
	list_add_tail(&vport->listentry, &phba->port_list);
	spin_unlock_irq(&phba->hbalock);
	return vport;

out_put_shost:
	scsi_host_put(shost);
out:
	return NULL;
}

/**
 * destroy_port: Destroy an FC port.
 * @vport: pointer to an lpfc virtual N_Port data structure.
 *
 * This routine destroys a FC port from the upper layer protocol. All the
 * resources associated with the port are released.
 **/
void
destroy_port(struct lpfc_vport *vport)
{
	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
	struct lpfc_hba  *phba = vport->phba;

	lpfc_debugfs_terminate(vport);
	fc_remove_host(shost);
	scsi_remove_host(shost);

	spin_lock_irq(&phba->hbalock);
	list_del_init(&vport->listentry);
	spin_unlock_irq(&phba->hbalock);

	lpfc_cleanup(vport);
	return;
}

/**
 * lpfc_get_instance: Get a unique integer ID.
 *
 * This routine allocates a unique integer ID from lpfc_hba_index pool. It
 * uses the kernel idr facility to perform the task.
 *
 * Return codes:
 *   instance - a unique integer ID allocated as the new instance.
 *   -1 - lpfc get instance failed.
 **/
int
lpfc_get_instance(void)
{
	int instance = 0;

	/* Assign an unused number */
	if (!idr_pre_get(&lpfc_hba_index, GFP_KERNEL))
		return -1;
	if (idr_get_new(&lpfc_hba_index, NULL, &instance))
		return -1;
	return instance;
}

/**
 * lpfc_scan_finished: method for SCSI layer to detect whether scan is done.
 * @shost: pointer to SCSI host data structure.
 * @time: elapsed time of the scan in jiffies.
 *
 * This routine is called by the SCSI layer with a SCSI host to determine
 * whether the scan host is finished.
 *
 * Note: there is no scan_start function as adapter initialization will have
 * asynchronously kicked off the link initialization.
 *
 * Return codes
 *   0 - SCSI host scan is not over yet.
 *   1 - SCSI host scan is over.
 **/
int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
{
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
	struct lpfc_hba   *phba = vport->phba;
	int stat = 0;

	spin_lock_irq(shost->host_lock);

	if (vport->load_flag & FC_UNLOADING) {
		stat = 1;
		goto finished;
	}
	if (time >= 30 * HZ) {
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0461 Scanning longer than 30 "
				"seconds.  Continuing initialization\n");
		stat = 1;
		goto finished;
	}
	if (time >= 15 * HZ && phba->link_state <= LPFC_LINK_DOWN) {
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0465 Link down longer than 15 "
				"seconds.  Continuing initialization\n");
		stat = 1;
		goto finished;
	}

	if (vport->port_state != LPFC_VPORT_READY)
		goto finished;
	if (vport->num_disc_nodes || vport->fc_prli_sent)
		goto finished;
	if (vport->fc_map_cnt == 0 && time < 2 * HZ)
		goto finished;
	if ((phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) != 0)
		goto finished;

	stat = 1;

finished:
	spin_unlock_irq(shost->host_lock);
	return stat;
}

/**
 * lpfc_host_attrib_init: Initialize SCSI host attributes on a FC port.
 * @shost: pointer to SCSI host data structure.
 *
 * This routine initializes a given SCSI host attributes on a FC port. The
 * SCSI host can be either on top of a physical port or a virtual port.
 **/
void lpfc_host_attrib_init(struct Scsi_Host *shost)
{
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
	struct lpfc_hba   *phba = vport->phba;
	/*
	 * Set fixed host attributes.  Must done after lpfc_sli_hba_setup().
	 */

	fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
	fc_host_supported_classes(shost) = FC_COS_CLASS3;

	memset(fc_host_supported_fc4s(shost), 0,
	       sizeof(fc_host_supported_fc4s(shost)));
	fc_host_supported_fc4s(shost)[2] = 1;
	fc_host_supported_fc4s(shost)[7] = 1;

	lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost),
				 sizeof fc_host_symbolic_name(shost));

	fc_host_supported_speeds(shost) = 0;
	if (phba->lmt & LMT_10Gb)
		fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT;
	if (phba->lmt & LMT_8Gb)
		fc_host_supported_speeds(shost) |= FC_PORTSPEED_8GBIT;
	if (phba->lmt & LMT_4Gb)
		fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT;
	if (phba->lmt & LMT_2Gb)
		fc_host_supported_speeds(shost) |= FC_PORTSPEED_2GBIT;
	if (phba->lmt & LMT_1Gb)
		fc_host_supported_speeds(shost) |= FC_PORTSPEED_1GBIT;

	fc_host_maxframe_size(shost) =
		(((uint32_t) vport->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
		(uint32_t) vport->fc_sparam.cmn.bbRcvSizeLsb;

	/* This value is also unchanging */
	memset(fc_host_active_fc4s(shost), 0,
	       sizeof(fc_host_active_fc4s(shost)));
	fc_host_active_fc4s(shost)[2] = 1;
	fc_host_active_fc4s(shost)[7] = 1;

	fc_host_max_npiv_vports(shost) = phba->max_vpi;
	spin_lock_irq(shost->host_lock);
	vport->load_flag &= ~FC_LOADING;
	spin_unlock_irq(shost->host_lock);
}

/**
 * lpfc_enable_msix: Enable MSI-X interrupt mode.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to enable the MSI-X interrupt vectors. The kernel
 * function pci_enable_msix() is called to enable the MSI-X vectors. Note that
 * pci_enable_msix(), once invoked, enables either all or nothing, depending
 * on the current availability of PCI vector resources. The device driver is
 * responsible for calling the individual request_irq() to register each MSI-X
 * vector with a interrupt handler, which is done in this function. Note that
 * later when device is unloading, the driver should always call free_irq()
 * on all MSI-X vectors it has done request_irq() on before calling
 * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
 * will be left with MSI-X enabled and leaks its vectors.
 *
 * Return codes
 *   0 - sucessful
 *   other values - error
 **/
static int
lpfc_enable_msix(struct lpfc_hba *phba)
{
	int rc, i;
	LPFC_MBOXQ_t *pmb;

	/* Set up MSI-X multi-message vectors */
	for (i = 0; i < LPFC_MSIX_VECTORS; i++)
		phba->msix_entries[i].entry = i;

	/* Configure MSI-X capability structure */
	rc = pci_enable_msix(phba->pcidev, phba->msix_entries,
				ARRAY_SIZE(phba->msix_entries));
	if (rc) {
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0420 Enable MSI-X failed (%d), continuing "
				"with MSI\n", rc);
		goto msi_fail_out;
	} else
		for (i = 0; i < LPFC_MSIX_VECTORS; i++)
			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
					"0477 MSI-X entry[%d]: vector=x%x "
					"message=%d\n", i,
					phba->msix_entries[i].vector,
					phba->msix_entries[i].entry);
	/*
	 * Assign MSI-X vectors to interrupt handlers
	 */

	/* vector-0 is associated to slow-path handler */
	rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler,
			 IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba);
	if (rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0421 MSI-X slow-path request_irq failed "
				"(%d), continuing with MSI\n", rc);
		goto msi_fail_out;
	}

	/* vector-1 is associated to fast-path handler */
	rc = request_irq(phba->msix_entries[1].vector, &lpfc_fp_intr_handler,
			 IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba);

	if (rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0429 MSI-X fast-path request_irq failed "
				"(%d), continuing with MSI\n", rc);
		goto irq_fail_out;
	}

	/*
	 * Configure HBA MSI-X attention conditions to messages
	 */
	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);

	if (!pmb) {
		rc = -ENOMEM;
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0474 Unable to allocate memory for issuing "
				"MBOX_CONFIG_MSI command\n");
		goto mem_fail_out;
	}
	rc = lpfc_config_msi(phba, pmb);
	if (rc)
		goto mbx_fail_out;
	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
	if (rc != MBX_SUCCESS) {
		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
				"0351 Config MSI mailbox command failed, "
				"mbxCmd x%x, mbxStatus x%x\n",
				pmb->mb.mbxCommand, pmb->mb.mbxStatus);
		goto mbx_fail_out;
	}

	/* Free memory allocated for mailbox command */
	mempool_free(pmb, phba->mbox_mem_pool);
	return rc;

mbx_fail_out:
	/* Free memory allocated for mailbox command */
	mempool_free(pmb, phba->mbox_mem_pool);

mem_fail_out:
	/* free the irq already requested */
	free_irq(phba->msix_entries[1].vector, phba);

irq_fail_out:
	/* free the irq already requested */
	free_irq(phba->msix_entries[0].vector, phba);

msi_fail_out:
	/* Unconfigure MSI-X capability structure */
	pci_disable_msix(phba->pcidev);
	return rc;
}

/**
 * lpfc_disable_msix: Disable MSI-X interrupt mode.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to release the MSI-X vectors and then disable the
 * MSI-X interrupt mode.
 **/
static void
lpfc_disable_msix(struct lpfc_hba *phba)
{
	int i;

	/* Free up MSI-X multi-message vectors */
	for (i = 0; i < LPFC_MSIX_VECTORS; i++)
		free_irq(phba->msix_entries[i].vector, phba);
	/* Disable MSI-X */
	pci_disable_msix(phba->pcidev);
}

/**
 * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem.
 * @pdev: pointer to PCI device
 * @pid: pointer to PCI device identifier
 *
 * This routine is to be registered to the kernel's PCI subsystem. When an
 * Emulex HBA is presented in PCI bus, the kernel PCI subsystem looks at
 * PCI device-specific information of the device and driver to see if the
 * driver state that it can support this kind of device. If the match is
 * successful, the driver core invokes this routine. If this routine
 * determines it can claim the HBA, it does all the initialization that it
 * needs to do to handle the HBA properly.
 *
 * Return code
 *   0 - driver can claim the device
 *   negative value - driver can not claim the device
 **/
static int __devinit
lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
{
	struct lpfc_vport *vport = NULL;
	struct lpfc_hba   *phba;
	struct lpfc_sli   *psli;
	struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
	struct Scsi_Host  *shost = NULL;
	void *ptr;
	unsigned long bar0map_len, bar2map_len;
	int error = -ENODEV, retval;
	int  i, hbq_count;
	uint16_t iotag;
	int bars = pci_select_bars(pdev, IORESOURCE_MEM);
	struct lpfc_adapter_event_header adapter_event;

	if (pci_enable_device_mem(pdev))
		goto out;
	if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
		goto out_disable_device;

	phba = kzalloc(sizeof (struct lpfc_hba), GFP_KERNEL);
	if (!phba)
		goto out_release_regions;

	atomic_set(&phba->fast_event_count, 0);
	spin_lock_init(&phba->hbalock);

	/* Initialize ndlp management spinlock */
	spin_lock_init(&phba->ndlp_lock);

	phba->pcidev = pdev;

	/* Assign an unused board number */
	if ((phba->brd_no = lpfc_get_instance()) < 0)
		goto out_free_phba;

	INIT_LIST_HEAD(&phba->port_list);
	init_waitqueue_head(&phba->wait_4_mlo_m_q);
	/*
	 * Get all the module params for configuring this host and then
	 * establish the host.
	 */
	lpfc_get_cfgparam(phba);
	phba->max_vpi = LPFC_MAX_VPI;

	/* Initialize timers used by driver */
	init_timer(&phba->hb_tmofunc);
	phba->hb_tmofunc.function = lpfc_hb_timeout;
	phba->hb_tmofunc.data = (unsigned long)phba;

	psli = &phba->sli;
	init_timer(&psli->mbox_tmo);
	psli->mbox_tmo.function = lpfc_mbox_timeout;
	psli->mbox_tmo.data = (unsigned long) phba;
	init_timer(&phba->fcp_poll_timer);
	phba->fcp_poll_timer.function = lpfc_poll_timeout;
	phba->fcp_poll_timer.data = (unsigned long) phba;
	init_timer(&phba->fabric_block_timer);
	phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
	phba->fabric_block_timer.data = (unsigned long) phba;
	init_timer(&phba->eratt_poll);
	phba->eratt_poll.function = lpfc_poll_eratt;
	phba->eratt_poll.data = (unsigned long) phba;

	pci_set_master(pdev);
	pci_save_state(pdev);
	pci_try_set_mwi(pdev);

	if (pci_set_dma_mask(phba->pcidev, DMA_64BIT_MASK) != 0)
		if (pci_set_dma_mask(phba->pcidev, DMA_32BIT_MASK) != 0)
			goto out_idr_remove;

	/*
	 * Get the bus address of Bar0 and Bar2 and the number of bytes
	 * required by each mapping.
	 */
	phba->pci_bar0_map = pci_resource_start(phba->pcidev, 0);
	bar0map_len        = pci_resource_len(phba->pcidev, 0);

	phba->pci_bar2_map = pci_resource_start(phba->pcidev, 2);
	bar2map_len        = pci_resource_len(phba->pcidev, 2);

	/* Map HBA SLIM to a kernel virtual address. */
	phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
	if (!phba->slim_memmap_p) {
		error = -ENODEV;
		dev_printk(KERN_ERR, &pdev->dev,
			   "ioremap failed for SLIM memory.\n");
		goto out_idr_remove;
	}

	/* Map HBA Control Registers to a kernel virtual address. */
	phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
	if (!phba->ctrl_regs_memmap_p) {
		error = -ENODEV;
		dev_printk(KERN_ERR, &pdev->dev,
			   "ioremap failed for HBA control registers.\n");
		goto out_iounmap_slim;
	}

	/* Allocate memory for SLI-2 structures */
	phba->slim2p.virt = dma_alloc_coherent(&phba->pcidev->dev,
					       SLI2_SLIM_SIZE,
					       &phba->slim2p.phys,
					       GFP_KERNEL);
	if (!phba->slim2p.virt)
		goto out_iounmap;

	memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
	phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
	phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
	phba->IOCBs = (phba->slim2p.virt +
		       offsetof(struct lpfc_sli2_slim, IOCBs));

	phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev,
						 lpfc_sli_hbq_size(),
						 &phba->hbqslimp.phys,
						 GFP_KERNEL);
	if (!phba->hbqslimp.virt)
		goto out_free_slim;

	hbq_count = lpfc_sli_hbq_count();
	ptr = phba->hbqslimp.virt;
	for (i = 0; i < hbq_count; ++i) {
		phba->hbqs[i].hbq_virt = ptr;
		INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
		ptr += (lpfc_hbq_defs[i]->entry_count *
			sizeof(struct lpfc_hbq_entry));
	}
	phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
	phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer  = lpfc_els_hbq_free;

	memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());

	INIT_LIST_HEAD(&phba->hbqbuf_in_list);

	/* Initialize the SLI Layer to run with lpfc HBAs. */
	lpfc_sli_setup(phba);
	lpfc_sli_queue_setup(phba);

	retval = lpfc_mem_alloc(phba);
	if (retval) {
		error = retval;
		goto out_free_hbqslimp;
	}

	/* Initialize and populate the iocb list per host.  */
	INIT_LIST_HEAD(&phba->lpfc_iocb_list);
	for (i = 0; i < LPFC_IOCB_LIST_CNT; i++) {
		iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
		if (iocbq_entry == NULL) {
			printk(KERN_ERR "%s: only allocated %d iocbs of "
				"expected %d count. Unloading driver.\n",
				__func__, i, LPFC_IOCB_LIST_CNT);
			error = -ENOMEM;
			goto out_free_iocbq;
		}

		iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
		if (iotag == 0) {
			kfree (iocbq_entry);
			printk(KERN_ERR "%s: failed to allocate IOTAG. "
			       "Unloading driver.\n",
				__func__);
			error = -ENOMEM;
			goto out_free_iocbq;
		}

		spin_lock_irq(&phba->hbalock);
		list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
		phba->total_iocbq_bufs++;
		spin_unlock_irq(&phba->hbalock);
	}

	/* Initialize HBA structure */
	phba->fc_edtov = FF_DEF_EDTOV;
	phba->fc_ratov = FF_DEF_RATOV;
	phba->fc_altov = FF_DEF_ALTOV;
	phba->fc_arbtov = FF_DEF_ARBTOV;

	INIT_LIST_HEAD(&phba->work_list);
	phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
	phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));

	/* Initialize the wait queue head for the kernel thread */
	init_waitqueue_head(&phba->work_waitq);

	/* Startup the kernel thread for this host adapter. */
	phba->worker_thread = kthread_run(lpfc_do_work, phba,
				       "lpfc_worker_%d", phba->brd_no);
	if (IS_ERR(phba->worker_thread)) {
		error = PTR_ERR(phba->worker_thread);
		goto out_free_iocbq;
	}

	/* Initialize the list of scsi buffers used by driver for scsi IO. */
	spin_lock_init(&phba->scsi_buf_list_lock);
	INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);

	/* Initialize list of fabric iocbs */
	INIT_LIST_HEAD(&phba->fabric_iocb_list);

	/* Initialize list to save ELS buffers */
	INIT_LIST_HEAD(&phba->elsbuf);

	vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
	if (!vport)
		goto out_kthread_stop;

	shost = lpfc_shost_from_vport(vport);
	phba->pport = vport;
	lpfc_debugfs_initialize(vport);

	pci_set_drvdata(pdev, shost);
	phba->intr_type = NONE;

	phba->MBslimaddr = phba->slim_memmap_p;
	phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
	phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
	phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
	phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;

	/* Configure and enable interrupt */
	if (phba->cfg_use_msi == 2) {
		/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
		error = lpfc_sli_config_port(phba, 3);
		if (error)
			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0427 Firmware not capable of SLI 3 mode.\n");
		else {
			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0426 Firmware capable of SLI 3 mode.\n");
			/* Now, try to enable MSI-X interrupt mode */
			error = lpfc_enable_msix(phba);
			if (!error) {
				phba->intr_type = MSIX;
				lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
						"0430 enable MSI-X mode.\n");
			}
		}
	}

	/* Fallback to MSI if MSI-X initialization failed */
	if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) {
		retval = pci_enable_msi(phba->pcidev);
		if (!retval) {
			phba->intr_type = MSI;
			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
					"0473 enable MSI mode.\n");
		} else
			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
					"0452 enable IRQ mode.\n");
	}

	/* MSI-X is the only case the doesn't need to call request_irq */
	if (phba->intr_type != MSIX) {
		retval = request_irq(phba->pcidev->irq, lpfc_intr_handler,
				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
		if (retval) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0451 Enable "
					"interrupt handler failed\n");
			error = retval;
			goto out_disable_msi;
		} else if (phba->intr_type != MSI)
			phba->intr_type = INTx;
	}

	if (lpfc_alloc_sysfs_attr(vport)) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1476 Failed to allocate sysfs attr\n");
		error = -ENOMEM;
		goto out_free_irq;
	}

	if (lpfc_sli_hba_setup(phba)) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1477 Failed to set up hba\n");
		error = -ENODEV;
		goto out_remove_device;
	}

	/*
	 * hba setup may have changed the hba_queue_depth so we need to adjust
	 * the value of can_queue.
	 */
	shost->can_queue = phba->cfg_hba_queue_depth - 10;

	lpfc_host_attrib_init(shost);

	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
		spin_lock_irq(shost->host_lock);
		lpfc_poll_start_timer(phba);
		spin_unlock_irq(shost->host_lock);
	}

	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"0428 Perform SCSI scan\n");
	/* Send board arrival event to upper layer */
	adapter_event.event_type = FC_REG_ADAPTER_EVENT;
	adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
	fc_host_post_vendor_event(shost, fc_get_event_number(),
		sizeof(adapter_event),
		(char *) &adapter_event,
		LPFC_NL_VENDOR_ID);

	return 0;

out_remove_device:
	lpfc_free_sysfs_attr(vport);
	spin_lock_irq(shost->host_lock);
	vport->load_flag |= FC_UNLOADING;
	spin_unlock_irq(shost->host_lock);
out_free_irq:
	lpfc_stop_phba_timers(phba);
	phba->pport->work_port_events = 0;

	if (phba->intr_type == MSIX)
		lpfc_disable_msix(phba);
	else
		free_irq(phba->pcidev->irq, phba);

out_disable_msi:
	if (phba->intr_type == MSI)
		pci_disable_msi(phba->pcidev);
	destroy_port(vport);
out_kthread_stop:
	kthread_stop(phba->worker_thread);
out_free_iocbq:
	list_for_each_entry_safe(iocbq_entry, iocbq_next,
						&phba->lpfc_iocb_list, list) {
		kfree(iocbq_entry);
		phba->total_iocbq_bufs--;
	}
	lpfc_mem_free(phba);
out_free_hbqslimp:
	dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
			  phba->hbqslimp.virt, phba->hbqslimp.phys);
out_free_slim:
	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
			  phba->slim2p.virt, phba->slim2p.phys);
out_iounmap:
	iounmap(phba->ctrl_regs_memmap_p);
out_iounmap_slim:
	iounmap(phba->slim_memmap_p);
out_idr_remove:
	idr_remove(&lpfc_hba_index, phba->brd_no);
out_free_phba:
	kfree(phba);
out_release_regions:
	pci_release_selected_regions(pdev, bars);
out_disable_device:
	pci_disable_device(pdev);
out:
	pci_set_drvdata(pdev, NULL);
	if (shost)
		scsi_host_put(shost);
	return error;
}

/**
 * lpfc_pci_remove_one: lpfc PCI func to unregister device from PCI subsystem.
 * @pdev: pointer to PCI device
 *
 * This routine is to be registered to the kernel's PCI subsystem. When an
 * Emulex HBA is removed from PCI bus, it performs all the necessary cleanup
 * for the HBA device to be removed from the PCI subsystem properly.
 **/
static void __devexit
lpfc_pci_remove_one(struct pci_dev *pdev)
{
	struct Scsi_Host  *shost = pci_get_drvdata(pdev);
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
	struct lpfc_vport **vports;
	struct lpfc_hba   *phba = vport->phba;
	int i;
	int bars = pci_select_bars(pdev, IORESOURCE_MEM);

	spin_lock_irq(&phba->hbalock);
	vport->load_flag |= FC_UNLOADING;
	spin_unlock_irq(&phba->hbalock);

	lpfc_free_sysfs_attr(vport);

	kthread_stop(phba->worker_thread);

	/* Release all the vports against this physical port */
	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL)
		for (i = 1; i <= phba->max_vpi && vports[i] != NULL; i++)
			fc_vport_terminate(vports[i]->fc_vport);
	lpfc_destroy_vport_work_array(phba, vports);

	/* Remove FC host and then SCSI host with the physical port */
	fc_remove_host(shost);
	scsi_remove_host(shost);
	lpfc_cleanup(vport);

	/*
	 * Bring down the SLI Layer. This step disable all interrupts,
	 * clears the rings, discards all mailbox commands, and resets
	 * the HBA.
	 */
	lpfc_sli_hba_down(phba);
	lpfc_sli_brdrestart(phba);

	lpfc_stop_phba_timers(phba);
	spin_lock_irq(&phba->hbalock);
	list_del_init(&vport->listentry);
	spin_unlock_irq(&phba->hbalock);

	lpfc_debugfs_terminate(vport);

	if (phba->intr_type == MSIX)
		lpfc_disable_msix(phba);
	else {
		free_irq(phba->pcidev->irq, phba);
		if (phba->intr_type == MSI)
			pci_disable_msi(phba->pcidev);
	}

	pci_set_drvdata(pdev, NULL);
	scsi_host_put(shost);

	/*
	 * Call scsi_free before mem_free since scsi bufs are released to their
	 * corresponding pools here.
	 */
	lpfc_scsi_free(phba);
	lpfc_mem_free(phba);

	dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
			  phba->hbqslimp.virt, phba->hbqslimp.phys);

	/* Free resources associated with SLI2 interface */
	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
			  phba->slim2p.virt, phba->slim2p.phys);

	/* unmap adapter SLIM and Control Registers */
	iounmap(phba->ctrl_regs_memmap_p);
	iounmap(phba->slim_memmap_p);

	idr_remove(&lpfc_hba_index, phba->brd_no);

	kfree(phba);

	pci_release_selected_regions(pdev, bars);
	pci_disable_device(pdev);
}

/**
 * lpfc_pci_suspend_one: lpfc PCI func to suspend device for power management.
 * @pdev: pointer to PCI device
 * @msg: power management message
 *
 * This routine is to be registered to the kernel's PCI subsystem to support
 * system Power Management (PM). When PM invokes this method, it quiesces the
 * device by stopping the driver's worker thread for the device, turning off
 * device's interrupt and DMA, and bring the device offline. Note that as the
 * driver implements the minimum PM requirements to a power-aware driver's PM
 * support for suspend/resume -- all the possible PM messages (SUSPEND,
 * HIBERNATE, FREEZE) to the suspend() method call will be treated as SUSPEND
 * and the driver will fully reinitialize its device during resume() method
 * call, the driver will set device to PCI_D3hot state in PCI config space
 * instead of setting it according to the @msg provided by the PM.
 *
 * Return code
 *   0 - driver suspended the device
 *   Error otherwise
 **/
static int
lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"0473 PCI device Power Management suspend.\n");

	/* Bring down the device */
	lpfc_offline_prep(phba);
	lpfc_offline(phba);
	kthread_stop(phba->worker_thread);

	/* Disable interrupt from device */
	lpfc_disable_intr(phba);

	/* Save device state to PCI config space */
	pci_save_state(pdev);
	pci_set_power_state(pdev, PCI_D3hot);

	return 0;
}

/**
 * lpfc_pci_resume_one: lpfc PCI func to resume device for power management.
 * @pdev: pointer to PCI device
 *
 * This routine is to be registered to the kernel's PCI subsystem to support
 * system Power Management (PM). When PM invokes this method, it restores
 * the device's PCI config space state and fully reinitializes the device
 * and brings it online. Note that as the driver implements the minimum PM
 * requirements to a power-aware driver's PM for suspend/resume -- all
 * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
 * method call will be treated as SUSPEND and the driver will fully
 * reinitialize its device during resume() method call, the device will be
 * set to PCI_D0 directly in PCI config space before restoring the state.
 *
 * Return code
 *   0 - driver suspended the device
 *   Error otherwise
 **/
static int
lpfc_pci_resume_one(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
	int error;

	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"0452 PCI device Power Management resume.\n");

	/* Restore device state from PCI config space */
	pci_set_power_state(pdev, PCI_D0);
	pci_restore_state(pdev);
	if (pdev->is_busmaster)
		pci_set_master(pdev);

	/* Startup the kernel thread for this host adapter. */
	phba->worker_thread = kthread_run(lpfc_do_work, phba,
					"lpfc_worker_%d", phba->brd_no);
	if (IS_ERR(phba->worker_thread)) {
		error = PTR_ERR(phba->worker_thread);
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0434 PM resume failed to start worker "
				"thread: error=x%x.\n", error);
		return error;
	}

	/* Enable interrupt from device */
	error = lpfc_enable_intr(phba);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0430 PM resume Failed to enable interrupt: "
				"error=x%x.\n", error);
		return error;
	}

	/* Restart HBA and bring it online */
	lpfc_sli_brdrestart(phba);
	lpfc_online(phba);

	return 0;
}

/**
 * lpfc_io_error_detected: Driver method for handling PCI I/O error detected.
 * @pdev: pointer to PCI device.
 * @state: the current PCI connection state.
 *
 * This routine is registered to the PCI subsystem for error handling. This
 * function is called by the PCI subsystem after a PCI bus error affecting
 * this device has been detected. When this function is invoked, it will
 * need to stop all the I/Os and interrupt(s) to the device. Once that is
 * done, it will return PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to
 * perform proper recovery as desired.
 *
 * Return codes
 *   PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
 *   PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 **/
static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
				pci_channel_state_t state)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
	struct lpfc_sli *psli = &phba->sli;
	struct lpfc_sli_ring  *pring;

	if (state == pci_channel_io_perm_failure) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0472 PCI channel I/O permanent failure\n");
		/* Block all SCSI devices' I/Os on the host */
		lpfc_scsi_dev_block(phba);
		/* Clean up all driver's outstanding SCSI I/Os */
		lpfc_sli_flush_fcp_rings(phba);
		return PCI_ERS_RESULT_DISCONNECT;
	}

	pci_disable_device(pdev);
	/*
	 * There may be I/Os dropped by the firmware.
	 * Error iocb (I/O) on txcmplq and let the SCSI layer
	 * retry it after re-establishing link.
	 */
	pring = &psli->ring[psli->fcp_ring];
	lpfc_sli_abort_iocb_ring(phba, pring);

	if (phba->intr_type == MSIX)
		lpfc_disable_msix(phba);
	else {
		free_irq(phba->pcidev->irq, phba);
		if (phba->intr_type == MSI)
			pci_disable_msi(phba->pcidev);
	}

	/* Request a slot reset. */
	return PCI_ERS_RESULT_NEED_RESET;
}

/**
 * lpfc_io_slot_reset: Restart a PCI device from scratch.
 * @pdev: pointer to PCI device.
 *
 * This routine is registered to the PCI subsystem for error handling. This is
 * called after PCI bus has been reset to restart the PCI card from scratch,
 * as if from a cold-boot. During the PCI subsystem error recovery, after the
 * driver returns PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform
 * proper error recovery and then call this routine before calling the .resume
 * method to recover the device. This function will initialize the HBA device,
 * enable the interrupt, but it will just put the HBA to offline state without
 * passing any I/O traffic.
 *
 * Return codes
 *   PCI_ERS_RESULT_RECOVERED - the device has been recovered
 *   PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 */
static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
	struct lpfc_sli *psli = &phba->sli;
	int error, retval;

	dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
	if (pci_enable_device_mem(pdev)) {
		printk(KERN_ERR "lpfc: Cannot re-enable "
			"PCI device after reset.\n");
		return PCI_ERS_RESULT_DISCONNECT;
	}

	pci_restore_state(pdev);
	if (pdev->is_busmaster)
		pci_set_master(pdev);

	spin_lock_irq(&phba->hbalock);
	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
	spin_unlock_irq(&phba->hbalock);

	/* Enable configured interrupt method */
	phba->intr_type = NONE;
	if (phba->cfg_use_msi == 2) {
		/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
		error = lpfc_sli_config_port(phba, 3);
		if (error)
			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0478 Firmware not capable of SLI 3 mode.\n");
		else {
			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0479 Firmware capable of SLI 3 mode.\n");
			/* Now, try to enable MSI-X interrupt mode */
			error = lpfc_enable_msix(phba);
			if (!error) {
				phba->intr_type = MSIX;
				lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
						"0480 enable MSI-X mode.\n");
			}
		}
	}

	/* Fallback to MSI if MSI-X initialization failed */
	if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) {
		retval = pci_enable_msi(phba->pcidev);
		if (!retval) {
			phba->intr_type = MSI;
			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
					"0481 enable MSI mode.\n");
		} else
			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
					"0470 enable IRQ mode.\n");
	}

	/* MSI-X is the only case the doesn't need to call request_irq */
	if (phba->intr_type != MSIX) {
		retval = request_irq(phba->pcidev->irq, lpfc_intr_handler,
				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
		if (retval) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0471 Enable interrupt handler "
					"failed\n");
		} else if (phba->intr_type != MSI)
			phba->intr_type = INTx;
	}

	/* Take device offline; this will perform cleanup */
	lpfc_offline(phba);
	lpfc_sli_brdrestart(phba);

	return PCI_ERS_RESULT_RECOVERED;
}

/**
 * lpfc_io_resume: Resume PCI I/O operation.
 * @pdev: pointer to PCI device
 *
 * This routine is registered to the PCI subsystem for error handling. It is
 * called when kernel error recovery tells the lpfc driver that it is ok to
 * resume normal PCI operation after PCI bus error recovery. After this call,
 * traffic can start to flow from this device again.
 */
static void lpfc_io_resume(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

	lpfc_online(phba);
}

static struct pci_device_id lpfc_id_table[] = {
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FIREFLY,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_THOR,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PEGASUS,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_CENTAUR,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_DRAGONFLY,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SUPERFLY,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_RFLY,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PFLY,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_SCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_DCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_SCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_DCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BMID,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BSMB,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HORNET,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_SCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_DCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZMID,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZSMB,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_TFLY,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP101,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP10000S,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP11000S,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LPE11000S,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_MID,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_SMB,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_DCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_SCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_S,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_VF,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_PF,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_S,
		PCI_ANY_ID, PCI_ANY_ID, },
	{ 0 }
};

MODULE_DEVICE_TABLE(pci, lpfc_id_table);

static struct pci_error_handlers lpfc_err_handler = {
	.error_detected = lpfc_io_error_detected,
	.slot_reset = lpfc_io_slot_reset,
	.resume = lpfc_io_resume,
};

static struct pci_driver lpfc_driver = {
	.name		= LPFC_DRIVER_NAME,
	.id_table	= lpfc_id_table,
	.probe		= lpfc_pci_probe_one,
	.remove		= __devexit_p(lpfc_pci_remove_one),
	.suspend        = lpfc_pci_suspend_one,
	.resume         = lpfc_pci_resume_one,
	.err_handler    = &lpfc_err_handler,
};

/**
 * lpfc_init: lpfc module initialization routine.
 *
 * This routine is to be invoked when the lpfc module is loaded into the
 * kernel. The special kernel macro module_init() is used to indicate the
 * role of this routine to the kernel as lpfc module entry point.
 *
 * Return codes
 *   0 - successful
 *   -ENOMEM - FC attach transport failed
 *   all others - failed
 */
static int __init
lpfc_init(void)
{
	int error = 0;

	printk(LPFC_MODULE_DESC "\n");
	printk(LPFC_COPYRIGHT "\n");

	if (lpfc_enable_npiv) {
		lpfc_transport_functions.vport_create = lpfc_vport_create;
		lpfc_transport_functions.vport_delete = lpfc_vport_delete;
	}
	lpfc_transport_template =
				fc_attach_transport(&lpfc_transport_functions);
	if (lpfc_transport_template == NULL)
		return -ENOMEM;
	if (lpfc_enable_npiv) {
		lpfc_vport_transport_template =
			fc_attach_transport(&lpfc_vport_transport_functions);
		if (lpfc_vport_transport_template == NULL) {
			fc_release_transport(lpfc_transport_template);
			return -ENOMEM;
		}
	}
	error = pci_register_driver(&lpfc_driver);
	if (error) {
		fc_release_transport(lpfc_transport_template);
		if (lpfc_enable_npiv)
			fc_release_transport(lpfc_vport_transport_template);
	}

	return error;
}

/**
 * lpfc_exit: lpfc module removal routine.
 *
 * This routine is invoked when the lpfc module is removed from the kernel.
 * The special kernel macro module_exit() is used to indicate the role of
 * this routine to the kernel as lpfc module exit point.
 */
static void __exit
lpfc_exit(void)
{
	pci_unregister_driver(&lpfc_driver);
	fc_release_transport(lpfc_transport_template);
	if (lpfc_enable_npiv)
		fc_release_transport(lpfc_vport_transport_template);
}

module_init(lpfc_init);
module_exit(lpfc_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(LPFC_MODULE_DESC);
MODULE_AUTHOR("Emulex Corporation - tech.support@emulex.com");
MODULE_VERSION("0:" LPFC_DRIVER_VERSION);