Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /****************************************************************************** |
2 | ** Device driver for the PCI-SCSI NCR538XX controller family. | |
3 | ** | |
4 | ** Copyright (C) 1994 Wolfgang Stanglmeier | |
19c65091 | 5 | ** Copyright (C) 1998-2001 Gerard Roudier <groudier@free.fr> |
1da177e4 LT |
6 | ** |
7 | ** This program is free software; you can redistribute it and/or modify | |
8 | ** it under the terms of the GNU General Public License as published by | |
9 | ** the Free Software Foundation; either version 2 of the License, or | |
10 | ** (at your option) any later version. | |
11 | ** | |
12 | ** This program is distributed in the hope that it will be useful, | |
13 | ** but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | ** GNU General Public License for more details. | |
16 | ** | |
17 | ** You should have received a copy of the GNU General Public License | |
18 | ** along with this program; if not, write to the Free Software | |
19 | ** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
20 | ** | |
21 | **----------------------------------------------------------------------------- | |
22 | ** | |
23 | ** This driver has been ported to Linux from the FreeBSD NCR53C8XX driver | |
24 | ** and is currently maintained by | |
25 | ** | |
26 | ** Gerard Roudier <groudier@free.fr> | |
27 | ** | |
28 | ** Being given that this driver originates from the FreeBSD version, and | |
29 | ** in order to keep synergy on both, any suggested enhancements and corrections | |
30 | ** received on Linux are automatically a potential candidate for the FreeBSD | |
31 | ** version. | |
32 | ** | |
33 | ** The original driver has been written for 386bsd and FreeBSD by | |
34 | ** Wolfgang Stanglmeier <wolf@cologne.de> | |
35 | ** Stefan Esser <se@mi.Uni-Koeln.de> | |
36 | ** | |
37 | ** And has been ported to NetBSD by | |
38 | ** Charles M. Hannum <mycroft@gnu.ai.mit.edu> | |
39 | ** | |
19c65091 MW |
40 | ** NVRAM detection and reading. |
41 | ** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk> | |
42 | ** | |
43 | ** Added support for MIPS big endian systems. | |
44 | ** Carsten Langgaard, carstenl@mips.com | |
45 | ** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. | |
46 | ** | |
47 | ** Added support for HP PARISC big endian systems. | |
48 | ** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. | |
49 | ** | |
1da177e4 LT |
50 | ******************************************************************************* |
51 | */ | |
52 | ||
53 | #ifndef NCR53C8XX_H | |
54 | #define NCR53C8XX_H | |
55 | ||
56 | #include <scsi/scsi_host.h> | |
57 | ||
b0dc1db1 | 58 | |
19c65091 | 59 | /* |
b0dc1db1 | 60 | ** If you want a driver as small as possible, donnot define the |
19c65091 MW |
61 | ** following options. |
62 | */ | |
63 | #define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT | |
64 | #define SCSI_NCR_DEBUG_INFO_SUPPORT | |
65 | ||
66 | /* | |
67 | ** To disable integrity checking, do not define the | |
68 | ** following option. | |
69 | */ | |
70 | #ifdef CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK | |
71 | # define SCSI_NCR_ENABLE_INTEGRITY_CHECK | |
72 | #endif | |
73 | ||
74 | /* --------------------------------------------------------------------- | |
75 | ** Take into account kernel configured parameters. | |
76 | ** Most of these options can be overridden at startup by a command line. | |
77 | ** --------------------------------------------------------------------- | |
78 | */ | |
79 | ||
80 | /* | |
81 | * For Ultra2 and Ultra3 SCSI support option, use special features. | |
82 | * | |
83 | * Value (default) means: | |
84 | * bit 0 : all features enabled, except: | |
85 | * bit 1 : PCI Write And Invalidate. | |
86 | * bit 2 : Data Phase Mismatch handling from SCRIPTS. | |
87 | * | |
88 | * Use boot options ncr53c8xx=specf:1 if you want all chip features to be | |
89 | * enabled by the driver. | |
90 | */ | |
91 | #define SCSI_NCR_SETUP_SPECIAL_FEATURES (3) | |
92 | ||
93 | #define SCSI_NCR_MAX_SYNC (80) | |
94 | ||
95 | /* | |
96 | * Allow tags from 2 to 256, default 8 | |
97 | */ | |
98 | #ifdef CONFIG_SCSI_NCR53C8XX_MAX_TAGS | |
99 | #if CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2 | |
100 | #define SCSI_NCR_MAX_TAGS (2) | |
101 | #elif CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256 | |
102 | #define SCSI_NCR_MAX_TAGS (256) | |
103 | #else | |
104 | #define SCSI_NCR_MAX_TAGS CONFIG_SCSI_NCR53C8XX_MAX_TAGS | |
105 | #endif | |
106 | #else | |
107 | #define SCSI_NCR_MAX_TAGS (8) | |
108 | #endif | |
109 | ||
110 | /* | |
111 | * Allow tagged command queuing support if configured with default number | |
112 | * of tags set to max (see above). | |
113 | */ | |
114 | #ifdef CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS | |
115 | #define SCSI_NCR_SETUP_DEFAULT_TAGS CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS | |
116 | #elif defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE | |
117 | #define SCSI_NCR_SETUP_DEFAULT_TAGS SCSI_NCR_MAX_TAGS | |
118 | #else | |
119 | #define SCSI_NCR_SETUP_DEFAULT_TAGS (0) | |
120 | #endif | |
121 | ||
122 | /* | |
123 | * Immediate arbitration | |
124 | */ | |
125 | #if defined(CONFIG_SCSI_NCR53C8XX_IARB) | |
126 | #define SCSI_NCR_IARB_SUPPORT | |
127 | #endif | |
128 | ||
129 | /* | |
130 | * Sync transfer frequency at startup. | |
131 | * Allow from 5Mhz to 80Mhz default 20 Mhz. | |
132 | */ | |
133 | #ifndef CONFIG_SCSI_NCR53C8XX_SYNC | |
134 | #define CONFIG_SCSI_NCR53C8XX_SYNC (20) | |
135 | #elif CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC | |
136 | #undef CONFIG_SCSI_NCR53C8XX_SYNC | |
137 | #define CONFIG_SCSI_NCR53C8XX_SYNC SCSI_NCR_MAX_SYNC | |
138 | #endif | |
139 | ||
140 | #if CONFIG_SCSI_NCR53C8XX_SYNC == 0 | |
141 | #define SCSI_NCR_SETUP_DEFAULT_SYNC (255) | |
142 | #elif CONFIG_SCSI_NCR53C8XX_SYNC <= 5 | |
143 | #define SCSI_NCR_SETUP_DEFAULT_SYNC (50) | |
144 | #elif CONFIG_SCSI_NCR53C8XX_SYNC <= 20 | |
145 | #define SCSI_NCR_SETUP_DEFAULT_SYNC (250/(CONFIG_SCSI_NCR53C8XX_SYNC)) | |
146 | #elif CONFIG_SCSI_NCR53C8XX_SYNC <= 33 | |
147 | #define SCSI_NCR_SETUP_DEFAULT_SYNC (11) | |
148 | #elif CONFIG_SCSI_NCR53C8XX_SYNC <= 40 | |
149 | #define SCSI_NCR_SETUP_DEFAULT_SYNC (10) | |
150 | #else | |
151 | #define SCSI_NCR_SETUP_DEFAULT_SYNC (9) | |
152 | #endif | |
153 | ||
154 | /* | |
155 | * Disallow disconnections at boot-up | |
156 | */ | |
157 | #ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT | |
158 | #define SCSI_NCR_SETUP_DISCONNECTION (0) | |
159 | #else | |
160 | #define SCSI_NCR_SETUP_DISCONNECTION (1) | |
161 | #endif | |
162 | ||
163 | /* | |
164 | * Force synchronous negotiation for all targets | |
165 | */ | |
166 | #ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO | |
167 | #define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (1) | |
168 | #else | |
169 | #define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (0) | |
170 | #endif | |
171 | ||
172 | /* | |
173 | * Disable master parity checking (flawed hardwares need that) | |
174 | */ | |
175 | #ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK | |
176 | #define SCSI_NCR_SETUP_MASTER_PARITY (0) | |
177 | #else | |
178 | #define SCSI_NCR_SETUP_MASTER_PARITY (1) | |
179 | #endif | |
180 | ||
181 | /* | |
182 | * Disable scsi parity checking (flawed devices may need that) | |
183 | */ | |
184 | #ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK | |
185 | #define SCSI_NCR_SETUP_SCSI_PARITY (0) | |
186 | #else | |
187 | #define SCSI_NCR_SETUP_SCSI_PARITY (1) | |
188 | #endif | |
189 | ||
190 | /* | |
191 | * Settle time after reset at boot-up | |
192 | */ | |
193 | #define SCSI_NCR_SETUP_SETTLE_TIME (2) | |
194 | ||
195 | /* | |
196 | ** Bridge quirks work-around option defaulted to 1. | |
197 | */ | |
198 | #ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT | |
199 | #define SCSI_NCR_PCIQ_WORK_AROUND_OPT 1 | |
200 | #endif | |
201 | ||
202 | /* | |
203 | ** Work-around common bridge misbehaviour. | |
204 | ** | |
205 | ** - Do not flush posted writes in the opposite | |
206 | ** direction on read. | |
207 | ** - May reorder DMA writes to memory. | |
208 | ** | |
209 | ** This option should not affect performances | |
210 | ** significantly, so it is the default. | |
211 | */ | |
212 | #if SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1 | |
213 | #define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM | |
214 | #define SCSI_NCR_PCIQ_MAY_REORDER_WRITES | |
215 | #define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS | |
216 | ||
217 | /* | |
218 | ** Same as option 1, but also deal with | |
219 | ** misconfigured interrupts. | |
220 | ** | |
0779bf2d | 221 | ** - Edge triggered instead of level sensitive. |
19c65091 MW |
222 | ** - No interrupt line connected. |
223 | ** - IRQ number misconfigured. | |
224 | ** | |
225 | ** If no interrupt is delivered, the driver will | |
226 | ** catch the interrupt conditions 10 times per | |
227 | ** second. No need to say that this option is | |
228 | ** not recommended. | |
229 | */ | |
230 | #elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2 | |
231 | #define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM | |
232 | #define SCSI_NCR_PCIQ_MAY_REORDER_WRITES | |
233 | #define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS | |
234 | #define SCSI_NCR_PCIQ_BROKEN_INTR | |
235 | ||
236 | /* | |
237 | ** Some bridge designers decided to flush | |
238 | ** everything prior to deliver the interrupt. | |
239 | ** This option tries to deal with such a | |
240 | ** behaviour. | |
241 | */ | |
242 | #elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3 | |
243 | #define SCSI_NCR_PCIQ_SYNC_ON_INTR | |
244 | #endif | |
245 | ||
246 | /* | |
247 | ** Other parameters not configurable with "make config" | |
248 | ** Avoid to change these constants, unless you know what you are doing. | |
249 | */ | |
250 | ||
251 | #define SCSI_NCR_ALWAYS_SIMPLE_TAG | |
252 | #define SCSI_NCR_MAX_SCATTER (127) | |
253 | #define SCSI_NCR_MAX_TARGET (16) | |
254 | ||
255 | /* | |
256 | ** Compute some desirable value for CAN_QUEUE | |
257 | ** and CMD_PER_LUN. | |
258 | ** The driver will use lower values if these | |
259 | ** ones appear to be too large. | |
260 | */ | |
261 | #define SCSI_NCR_CAN_QUEUE (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET) | |
262 | #define SCSI_NCR_CMD_PER_LUN (SCSI_NCR_MAX_TAGS) | |
263 | ||
264 | #define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER) | |
265 | #define SCSI_NCR_TIMER_INTERVAL (HZ) | |
266 | ||
19c65091 | 267 | #define SCSI_NCR_MAX_LUN (16) |
19c65091 MW |
268 | |
269 | /* | |
270 | * IO functions definition for big/little endian CPU support. | |
271 | * For now, the NCR is only supported in little endian addressing mode, | |
272 | */ | |
273 | ||
274 | #ifdef __BIG_ENDIAN | |
275 | ||
276 | #define inw_l2b inw | |
277 | #define inl_l2b inl | |
278 | #define outw_b2l outw | |
279 | #define outl_b2l outl | |
280 | ||
281 | #define readb_raw readb | |
282 | #define writeb_raw writeb | |
283 | ||
284 | #if defined(SCSI_NCR_BIG_ENDIAN) | |
285 | #define readw_l2b __raw_readw | |
286 | #define readl_l2b __raw_readl | |
287 | #define writew_b2l __raw_writew | |
288 | #define writel_b2l __raw_writel | |
289 | #define readw_raw __raw_readw | |
290 | #define readl_raw __raw_readl | |
291 | #define writew_raw __raw_writew | |
292 | #define writel_raw __raw_writel | |
293 | #else /* Other big-endian */ | |
294 | #define readw_l2b readw | |
295 | #define readl_l2b readl | |
296 | #define writew_b2l writew | |
297 | #define writel_b2l writel | |
298 | #define readw_raw readw | |
299 | #define readl_raw readl | |
300 | #define writew_raw writew | |
301 | #define writel_raw writel | |
302 | #endif | |
303 | ||
304 | #else /* little endian */ | |
305 | ||
306 | #define inw_raw inw | |
307 | #define inl_raw inl | |
308 | #define outw_raw outw | |
309 | #define outl_raw outl | |
310 | ||
311 | #define readb_raw readb | |
312 | #define readw_raw readw | |
313 | #define readl_raw readl | |
314 | #define writeb_raw writeb | |
315 | #define writew_raw writew | |
316 | #define writel_raw writel | |
317 | ||
318 | #endif | |
319 | ||
320 | #if !defined(__hppa__) && !defined(__mips__) | |
321 | #ifdef SCSI_NCR_BIG_ENDIAN | |
322 | #error "The NCR in BIG ENDIAN addressing mode is not (yet) supported" | |
323 | #endif | |
324 | #endif | |
325 | ||
326 | #define MEMORY_BARRIER() mb() | |
327 | ||
328 | ||
329 | /* | |
330 | * If the NCR uses big endian addressing mode over the | |
331 | * PCI, actual io register addresses for byte and word | |
332 | * accesses must be changed according to lane routing. | |
333 | * Btw, ncr_offb() and ncr_offw() macros only apply to | |
334 | * constants and so donnot generate bloated code. | |
335 | */ | |
336 | ||
337 | #if defined(SCSI_NCR_BIG_ENDIAN) | |
338 | ||
339 | #define ncr_offb(o) (((o)&~3)+((~((o)&3))&3)) | |
340 | #define ncr_offw(o) (((o)&~3)+((~((o)&3))&2)) | |
341 | ||
342 | #else | |
343 | ||
344 | #define ncr_offb(o) (o) | |
345 | #define ncr_offw(o) (o) | |
346 | ||
347 | #endif | |
348 | ||
349 | /* | |
350 | * If the CPU and the NCR use same endian-ness addressing, | |
351 | * no byte reordering is needed for script patching. | |
352 | * Macro cpu_to_scr() is to be used for script patching. | |
353 | * Macro scr_to_cpu() is to be used for getting a DWORD | |
354 | * from the script. | |
355 | */ | |
356 | ||
357 | #if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN) | |
358 | ||
359 | #define cpu_to_scr(dw) cpu_to_le32(dw) | |
360 | #define scr_to_cpu(dw) le32_to_cpu(dw) | |
361 | ||
362 | #elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN) | |
363 | ||
364 | #define cpu_to_scr(dw) cpu_to_be32(dw) | |
365 | #define scr_to_cpu(dw) be32_to_cpu(dw) | |
366 | ||
367 | #else | |
368 | ||
369 | #define cpu_to_scr(dw) (dw) | |
370 | #define scr_to_cpu(dw) (dw) | |
371 | ||
372 | #endif | |
373 | ||
374 | /* | |
375 | * Access to the controller chip. | |
376 | * | |
377 | * If the CPU and the NCR use same endian-ness addressing, | |
378 | * no byte reordering is needed for accessing chip io | |
379 | * registers. Functions suffixed by '_raw' are assumed | |
380 | * to access the chip over the PCI without doing byte | |
381 | * reordering. Functions suffixed by '_l2b' are | |
382 | * assumed to perform little-endian to big-endian byte | |
383 | * reordering, those suffixed by '_b2l' blah, blah, | |
384 | * blah, ... | |
385 | */ | |
386 | ||
387 | /* | |
388 | * MEMORY mapped IO input / output | |
389 | */ | |
390 | ||
391 | #define INB_OFF(o) readb_raw((char __iomem *)np->reg + ncr_offb(o)) | |
392 | #define OUTB_OFF(o, val) writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o)) | |
393 | ||
394 | #if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN) | |
395 | ||
396 | #define INW_OFF(o) readw_l2b((char __iomem *)np->reg + ncr_offw(o)) | |
397 | #define INL_OFF(o) readl_l2b((char __iomem *)np->reg + (o)) | |
398 | ||
399 | #define OUTW_OFF(o, val) writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o)) | |
400 | #define OUTL_OFF(o, val) writel_b2l((val), (char __iomem *)np->reg + (o)) | |
401 | ||
402 | #elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN) | |
403 | ||
404 | #define INW_OFF(o) readw_b2l((char __iomem *)np->reg + ncr_offw(o)) | |
405 | #define INL_OFF(o) readl_b2l((char __iomem *)np->reg + (o)) | |
406 | ||
407 | #define OUTW_OFF(o, val) writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o)) | |
408 | #define OUTL_OFF(o, val) writel_l2b((val), (char __iomem *)np->reg + (o)) | |
409 | ||
410 | #else | |
411 | ||
412 | #ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS | |
413 | /* Only 8 or 32 bit transfers allowed */ | |
414 | #define INW_OFF(o) (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1)) | |
415 | #else | |
416 | #define INW_OFF(o) readw_raw((char __iomem *)np->reg + ncr_offw(o)) | |
417 | #endif | |
418 | #define INL_OFF(o) readl_raw((char __iomem *)np->reg + (o)) | |
419 | ||
420 | #ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS | |
421 | /* Only 8 or 32 bit transfers allowed */ | |
422 | #define OUTW_OFF(o, val) do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0) | |
423 | #else | |
424 | #define OUTW_OFF(o, val) writew_raw((val), (char __iomem *)np->reg + ncr_offw(o)) | |
425 | #endif | |
426 | #define OUTL_OFF(o, val) writel_raw((val), (char __iomem *)np->reg + (o)) | |
427 | ||
428 | #endif | |
429 | ||
430 | #define INB(r) INB_OFF (offsetof(struct ncr_reg,r)) | |
431 | #define INW(r) INW_OFF (offsetof(struct ncr_reg,r)) | |
432 | #define INL(r) INL_OFF (offsetof(struct ncr_reg,r)) | |
433 | ||
434 | #define OUTB(r, val) OUTB_OFF (offsetof(struct ncr_reg,r), (val)) | |
435 | #define OUTW(r, val) OUTW_OFF (offsetof(struct ncr_reg,r), (val)) | |
436 | #define OUTL(r, val) OUTL_OFF (offsetof(struct ncr_reg,r), (val)) | |
437 | ||
438 | /* | |
439 | * Set bit field ON, OFF | |
440 | */ | |
441 | ||
442 | #define OUTONB(r, m) OUTB(r, INB(r) | (m)) | |
443 | #define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m)) | |
444 | #define OUTONW(r, m) OUTW(r, INW(r) | (m)) | |
445 | #define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m)) | |
446 | #define OUTONL(r, m) OUTL(r, INL(r) | (m)) | |
447 | #define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m)) | |
448 | ||
449 | /* | |
450 | * We normally want the chip to have a consistent view | |
451 | * of driver internal data structures when we restart it. | |
452 | * Thus these macros. | |
453 | */ | |
454 | #define OUTL_DSP(v) \ | |
455 | do { \ | |
456 | MEMORY_BARRIER(); \ | |
457 | OUTL (nc_dsp, (v)); \ | |
458 | } while (0) | |
459 | ||
460 | #define OUTONB_STD() \ | |
461 | do { \ | |
462 | MEMORY_BARRIER(); \ | |
463 | OUTONB (nc_dcntl, (STD|NOCOM)); \ | |
464 | } while (0) | |
465 | ||
466 | ||
467 | /* | |
468 | ** NCR53C8XX devices features table. | |
469 | */ | |
470 | struct ncr_chip { | |
471 | unsigned short revision_id; | |
472 | unsigned char burst_max; /* log-base-2 of max burst */ | |
473 | unsigned char offset_max; | |
474 | unsigned char nr_divisor; | |
475 | unsigned int features; | |
476 | #define FE_LED0 (1<<0) | |
477 | #define FE_WIDE (1<<1) /* Wide data transfers */ | |
478 | #define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */ | |
479 | #define FE_DBLR (1<<4) /* Clock doubler present */ | |
480 | #define FE_QUAD (1<<5) /* Clock quadrupler present */ | |
481 | #define FE_ERL (1<<6) /* Enable read line */ | |
482 | #define FE_CLSE (1<<7) /* Cache line size enable */ | |
483 | #define FE_WRIE (1<<8) /* Write & Invalidate enable */ | |
484 | #define FE_ERMP (1<<9) /* Enable read multiple */ | |
485 | #define FE_BOF (1<<10) /* Burst opcode fetch */ | |
486 | #define FE_DFS (1<<11) /* DMA fifo size */ | |
487 | #define FE_PFEN (1<<12) /* Prefetch enable */ | |
488 | #define FE_LDSTR (1<<13) /* Load/Store supported */ | |
489 | #define FE_RAM (1<<14) /* On chip RAM present */ | |
490 | #define FE_VARCLK (1<<15) /* SCSI clock may vary */ | |
491 | #define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */ | |
492 | #define FE_64BIT (1<<17) /* Have a 64-bit PCI interface */ | |
493 | #define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */ | |
494 | #define FE_NOPM (1<<19) /* Scripts handles phase mismatch */ | |
495 | #define FE_LEDC (1<<20) /* Hardware control of LED */ | |
496 | #define FE_DIFF (1<<21) /* Support Differential SCSI */ | |
497 | #define FE_66MHZ (1<<23) /* 66MHz PCI Support */ | |
498 | #define FE_DAC (1<<24) /* Support DAC cycles (64 bit addressing) */ | |
499 | #define FE_ISTAT1 (1<<25) /* Have ISTAT1, MBOX0, MBOX1 registers */ | |
500 | #define FE_DAC_IN_USE (1<<26) /* Platform does DAC cycles */ | |
501 | #define FE_EHP (1<<27) /* 720: Even host parity */ | |
502 | #define FE_MUX (1<<28) /* 720: Multiplexed bus */ | |
503 | #define FE_EA (1<<29) /* 720: Enable Ack */ | |
504 | ||
505 | #define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP) | |
506 | #define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80) | |
507 | #define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM) | |
508 | }; | |
509 | ||
510 | ||
511 | /* | |
512 | ** Driver setup structure. | |
513 | ** | |
514 | ** This structure is initialized from linux config options. | |
515 | ** It can be overridden at boot-up by the boot command line. | |
516 | */ | |
517 | #define SCSI_NCR_MAX_EXCLUDES 8 | |
518 | struct ncr_driver_setup { | |
519 | u8 master_parity; | |
520 | u8 scsi_parity; | |
521 | u8 disconnection; | |
522 | u8 special_features; | |
523 | u8 force_sync_nego; | |
524 | u8 reverse_probe; | |
525 | u8 pci_fix_up; | |
526 | u8 use_nvram; | |
527 | u8 verbose; | |
528 | u8 default_tags; | |
529 | u16 default_sync; | |
530 | u16 debug; | |
531 | u8 burst_max; | |
532 | u8 led_pin; | |
533 | u8 max_wide; | |
534 | u8 settle_delay; | |
535 | u8 diff_support; | |
536 | u8 irqm; | |
537 | u8 bus_check; | |
538 | u8 optimize; | |
539 | u8 recovery; | |
540 | u8 host_id; | |
541 | u16 iarb; | |
542 | u32 excludes[SCSI_NCR_MAX_EXCLUDES]; | |
543 | char tag_ctrl[100]; | |
544 | }; | |
545 | ||
546 | /* | |
547 | ** Initial setup. | |
0779bf2d | 548 | ** Can be overridden at startup by a command line. |
19c65091 MW |
549 | */ |
550 | #define SCSI_NCR_DRIVER_SETUP \ | |
551 | { \ | |
552 | SCSI_NCR_SETUP_MASTER_PARITY, \ | |
553 | SCSI_NCR_SETUP_SCSI_PARITY, \ | |
554 | SCSI_NCR_SETUP_DISCONNECTION, \ | |
555 | SCSI_NCR_SETUP_SPECIAL_FEATURES, \ | |
556 | SCSI_NCR_SETUP_FORCE_SYNC_NEGO, \ | |
557 | 0, \ | |
558 | 0, \ | |
559 | 1, \ | |
560 | 0, \ | |
561 | SCSI_NCR_SETUP_DEFAULT_TAGS, \ | |
562 | SCSI_NCR_SETUP_DEFAULT_SYNC, \ | |
563 | 0x00, \ | |
564 | 7, \ | |
565 | 0, \ | |
566 | 1, \ | |
567 | SCSI_NCR_SETUP_SETTLE_TIME, \ | |
568 | 0, \ | |
569 | 0, \ | |
570 | 1, \ | |
571 | 0, \ | |
572 | 0, \ | |
573 | 255, \ | |
574 | 0x00 \ | |
575 | } | |
576 | ||
577 | /* | |
578 | ** Boot fail safe setup. | |
579 | ** Override initial setup from boot command line: | |
580 | ** ncr53c8xx=safe:y | |
581 | */ | |
582 | #define SCSI_NCR_DRIVER_SAFE_SETUP \ | |
583 | { \ | |
584 | 0, \ | |
585 | 1, \ | |
586 | 0, \ | |
587 | 0, \ | |
588 | 0, \ | |
589 | 0, \ | |
590 | 0, \ | |
591 | 1, \ | |
592 | 2, \ | |
593 | 0, \ | |
594 | 255, \ | |
595 | 0x00, \ | |
596 | 255, \ | |
597 | 0, \ | |
598 | 0, \ | |
599 | 10, \ | |
600 | 1, \ | |
601 | 1, \ | |
602 | 1, \ | |
603 | 0, \ | |
604 | 0, \ | |
605 | 255 \ | |
606 | } | |
607 | ||
608 | /**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/ | |
609 | ||
610 | /*----------------------------------------------------------------- | |
611 | ** | |
612 | ** The ncr 53c810 register structure. | |
613 | ** | |
614 | **----------------------------------------------------------------- | |
615 | */ | |
616 | ||
617 | struct ncr_reg { | |
618 | /*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */ | |
619 | ||
620 | /*01*/ u8 nc_scntl1; /* no reset */ | |
621 | #define ISCON 0x10 /* connected to scsi */ | |
622 | #define CRST 0x08 /* force reset */ | |
623 | #define IARB 0x02 /* immediate arbitration */ | |
624 | ||
625 | /*02*/ u8 nc_scntl2; /* no disconnect expected */ | |
626 | #define SDU 0x80 /* cmd: disconnect will raise error */ | |
627 | #define CHM 0x40 /* sta: chained mode */ | |
628 | #define WSS 0x08 /* sta: wide scsi send [W]*/ | |
629 | #define WSR 0x01 /* sta: wide scsi received [W]*/ | |
630 | ||
631 | /*03*/ u8 nc_scntl3; /* cnf system clock dependent */ | |
632 | #define EWS 0x08 /* cmd: enable wide scsi [W]*/ | |
633 | #define ULTRA 0x80 /* cmd: ULTRA enable */ | |
634 | /* bits 0-2, 7 rsvd for C1010 */ | |
635 | ||
636 | /*04*/ u8 nc_scid; /* cnf host adapter scsi address */ | |
637 | #define RRE 0x40 /* r/w:e enable response to resel. */ | |
638 | #define SRE 0x20 /* r/w:e enable response to select */ | |
639 | ||
640 | /*05*/ u8 nc_sxfer; /* ### Sync speed and count */ | |
641 | /* bits 6-7 rsvd for C1010 */ | |
642 | ||
643 | /*06*/ u8 nc_sdid; /* ### Destination-ID */ | |
644 | ||
645 | /*07*/ u8 nc_gpreg; /* ??? IO-Pins */ | |
646 | ||
647 | /*08*/ u8 nc_sfbr; /* ### First byte in phase */ | |
648 | ||
649 | /*09*/ u8 nc_socl; | |
650 | #define CREQ 0x80 /* r/w: SCSI-REQ */ | |
651 | #define CACK 0x40 /* r/w: SCSI-ACK */ | |
652 | #define CBSY 0x20 /* r/w: SCSI-BSY */ | |
653 | #define CSEL 0x10 /* r/w: SCSI-SEL */ | |
654 | #define CATN 0x08 /* r/w: SCSI-ATN */ | |
655 | #define CMSG 0x04 /* r/w: SCSI-MSG */ | |
656 | #define CC_D 0x02 /* r/w: SCSI-C_D */ | |
657 | #define CI_O 0x01 /* r/w: SCSI-I_O */ | |
658 | ||
659 | /*0a*/ u8 nc_ssid; | |
660 | ||
661 | /*0b*/ u8 nc_sbcl; | |
662 | ||
663 | /*0c*/ u8 nc_dstat; | |
664 | #define DFE 0x80 /* sta: dma fifo empty */ | |
665 | #define MDPE 0x40 /* int: master data parity error */ | |
666 | #define BF 0x20 /* int: script: bus fault */ | |
667 | #define ABRT 0x10 /* int: script: command aborted */ | |
668 | #define SSI 0x08 /* int: script: single step */ | |
669 | #define SIR 0x04 /* int: script: interrupt instruct. */ | |
670 | #define IID 0x01 /* int: script: illegal instruct. */ | |
671 | ||
672 | /*0d*/ u8 nc_sstat0; | |
673 | #define ILF 0x80 /* sta: data in SIDL register lsb */ | |
674 | #define ORF 0x40 /* sta: data in SODR register lsb */ | |
675 | #define OLF 0x20 /* sta: data in SODL register lsb */ | |
676 | #define AIP 0x10 /* sta: arbitration in progress */ | |
677 | #define LOA 0x08 /* sta: arbitration lost */ | |
678 | #define WOA 0x04 /* sta: arbitration won */ | |
679 | #define IRST 0x02 /* sta: scsi reset signal */ | |
680 | #define SDP 0x01 /* sta: scsi parity signal */ | |
681 | ||
682 | /*0e*/ u8 nc_sstat1; | |
683 | #define FF3210 0xf0 /* sta: bytes in the scsi fifo */ | |
684 | ||
685 | /*0f*/ u8 nc_sstat2; | |
686 | #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/ | |
687 | #define ORF1 0x40 /* sta: data in SODR register msb[W]*/ | |
688 | #define OLF1 0x20 /* sta: data in SODL register msb[W]*/ | |
689 | #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */ | |
690 | #define LDSC 0x02 /* sta: disconnect & reconnect */ | |
691 | ||
692 | /*10*/ u8 nc_dsa; /* --> Base page */ | |
693 | /*11*/ u8 nc_dsa1; | |
694 | /*12*/ u8 nc_dsa2; | |
695 | /*13*/ u8 nc_dsa3; | |
696 | ||
697 | /*14*/ u8 nc_istat; /* --> Main Command and status */ | |
698 | #define CABRT 0x80 /* cmd: abort current operation */ | |
699 | #define SRST 0x40 /* mod: reset chip */ | |
700 | #define SIGP 0x20 /* r/w: message from host to ncr */ | |
701 | #define SEM 0x10 /* r/w: message between host + ncr */ | |
702 | #define CON 0x08 /* sta: connected to scsi */ | |
703 | #define INTF 0x04 /* sta: int on the fly (reset by wr)*/ | |
704 | #define SIP 0x02 /* sta: scsi-interrupt */ | |
705 | #define DIP 0x01 /* sta: host/script interrupt */ | |
706 | ||
707 | /*15*/ u8 nc_istat1; /* 896 and later cores only */ | |
708 | #define FLSH 0x04 /* sta: chip is flushing */ | |
709 | #define SRUN 0x02 /* sta: scripts are running */ | |
710 | #define SIRQD 0x01 /* r/w: disable INT pin */ | |
711 | ||
712 | /*16*/ u8 nc_mbox0; /* 896 and later cores only */ | |
713 | /*17*/ u8 nc_mbox1; /* 896 and later cores only */ | |
714 | ||
715 | /*18*/ u8 nc_ctest0; | |
716 | #define EHP 0x04 /* 720 even host parity */ | |
717 | /*19*/ u8 nc_ctest1; | |
718 | ||
719 | /*1a*/ u8 nc_ctest2; | |
720 | #define CSIGP 0x40 | |
721 | /* bits 0-2,7 rsvd for C1010 */ | |
722 | ||
723 | /*1b*/ u8 nc_ctest3; | |
724 | #define FLF 0x08 /* cmd: flush dma fifo */ | |
725 | #define CLF 0x04 /* cmd: clear dma fifo */ | |
726 | #define FM 0x02 /* mod: fetch pin mode */ | |
727 | #define WRIE 0x01 /* mod: write and invalidate enable */ | |
728 | /* bits 4-7 rsvd for C1010 */ | |
729 | ||
730 | /*1c*/ u32 nc_temp; /* ### Temporary stack */ | |
731 | ||
732 | /*20*/ u8 nc_dfifo; | |
733 | /*21*/ u8 nc_ctest4; | |
734 | #define MUX 0x80 /* 720 host bus multiplex mode */ | |
735 | #define BDIS 0x80 /* mod: burst disable */ | |
736 | #define MPEE 0x08 /* mod: master parity error enable */ | |
737 | ||
738 | /*22*/ u8 nc_ctest5; | |
739 | #define DFS 0x20 /* mod: dma fifo size */ | |
740 | /* bits 0-1, 3-7 rsvd for C1010 */ | |
741 | /*23*/ u8 nc_ctest6; | |
742 | ||
743 | /*24*/ u32 nc_dbc; /* ### Byte count and command */ | |
744 | /*28*/ u32 nc_dnad; /* ### Next command register */ | |
745 | /*2c*/ u32 nc_dsp; /* --> Script Pointer */ | |
746 | /*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */ | |
747 | ||
748 | /*34*/ u8 nc_scratcha; /* Temporary register a */ | |
749 | /*35*/ u8 nc_scratcha1; | |
750 | /*36*/ u8 nc_scratcha2; | |
751 | /*37*/ u8 nc_scratcha3; | |
752 | ||
753 | /*38*/ u8 nc_dmode; | |
754 | #define BL_2 0x80 /* mod: burst length shift value +2 */ | |
755 | #define BL_1 0x40 /* mod: burst length shift value +1 */ | |
756 | #define ERL 0x08 /* mod: enable read line */ | |
757 | #define ERMP 0x04 /* mod: enable read multiple */ | |
758 | #define BOF 0x02 /* mod: burst op code fetch */ | |
759 | ||
760 | /*39*/ u8 nc_dien; | |
761 | /*3a*/ u8 nc_sbr; | |
762 | ||
763 | /*3b*/ u8 nc_dcntl; /* --> Script execution control */ | |
764 | #define CLSE 0x80 /* mod: cache line size enable */ | |
765 | #define PFF 0x40 /* cmd: pre-fetch flush */ | |
766 | #define PFEN 0x20 /* mod: pre-fetch enable */ | |
767 | #define EA 0x20 /* mod: 720 enable-ack */ | |
768 | #define SSM 0x10 /* mod: single step mode */ | |
769 | #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */ | |
770 | #define STD 0x04 /* cmd: start dma mode */ | |
771 | #define IRQD 0x02 /* mod: irq disable */ | |
772 | #define NOCOM 0x01 /* cmd: protect sfbr while reselect */ | |
773 | /* bits 0-1 rsvd for C1010 */ | |
774 | ||
775 | /*3c*/ u32 nc_adder; | |
776 | ||
777 | /*40*/ u16 nc_sien; /* -->: interrupt enable */ | |
778 | /*42*/ u16 nc_sist; /* <--: interrupt status */ | |
779 | #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */ | |
780 | #define STO 0x0400/* sta: timeout (select) */ | |
781 | #define GEN 0x0200/* sta: timeout (general) */ | |
782 | #define HTH 0x0100/* sta: timeout (handshake) */ | |
783 | #define MA 0x80 /* sta: phase mismatch */ | |
784 | #define CMP 0x40 /* sta: arbitration complete */ | |
785 | #define SEL 0x20 /* sta: selected by another device */ | |
786 | #define RSL 0x10 /* sta: reselected by another device*/ | |
787 | #define SGE 0x08 /* sta: gross error (over/underflow)*/ | |
788 | #define UDC 0x04 /* sta: unexpected disconnect */ | |
789 | #define RST 0x02 /* sta: scsi bus reset detected */ | |
790 | #define PAR 0x01 /* sta: scsi parity error */ | |
791 | ||
792 | /*44*/ u8 nc_slpar; | |
793 | /*45*/ u8 nc_swide; | |
794 | /*46*/ u8 nc_macntl; | |
795 | /*47*/ u8 nc_gpcntl; | |
796 | /*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/ | |
797 | /*49*/ u8 nc_stime1; /* cmd: timeout user defined */ | |
798 | /*4a*/ u16 nc_respid; /* sta: Reselect-IDs */ | |
799 | ||
800 | /*4c*/ u8 nc_stest0; | |
801 | ||
802 | /*4d*/ u8 nc_stest1; | |
803 | #define SCLK 0x80 /* Use the PCI clock as SCSI clock */ | |
804 | #define DBLEN 0x08 /* clock doubler running */ | |
805 | #define DBLSEL 0x04 /* clock doubler selected */ | |
806 | ||
807 | ||
808 | /*4e*/ u8 nc_stest2; | |
809 | #define ROF 0x40 /* reset scsi offset (after gross error!) */ | |
810 | #define DIF 0x20 /* 720 SCSI differential mode */ | |
811 | #define EXT 0x02 /* extended filtering */ | |
812 | ||
813 | /*4f*/ u8 nc_stest3; | |
814 | #define TE 0x80 /* c: tolerAnt enable */ | |
815 | #define HSC 0x20 /* c: Halt SCSI Clock */ | |
816 | #define CSF 0x02 /* c: clear scsi fifo */ | |
817 | ||
818 | /*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */ | |
819 | /*52*/ u8 nc_stest4; | |
820 | #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */ | |
821 | #define SMODE_HVD 0x40 /* High Voltage Differential */ | |
822 | #define SMODE_SE 0x80 /* Single Ended */ | |
823 | #define SMODE_LVD 0xc0 /* Low Voltage Differential */ | |
824 | #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */ | |
825 | /* bits 0-5 rsvd for C1010 */ | |
826 | ||
827 | /*53*/ u8 nc_53_; | |
828 | /*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */ | |
829 | /*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */ | |
830 | #define ENPMJ 0x80 /* Enable Phase Mismatch Jump */ | |
831 | #define PMJCTL 0x40 /* Phase Mismatch Jump Control */ | |
832 | #define ENNDJ 0x20 /* Enable Non Data PM Jump */ | |
833 | #define DISFC 0x10 /* Disable Auto FIFO Clear */ | |
834 | #define DILS 0x02 /* Disable Internal Load/Store */ | |
835 | #define DPR 0x01 /* Disable Pipe Req */ | |
836 | ||
837 | /*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */ | |
838 | #define ZMOD 0x80 /* High Impedance Mode */ | |
839 | #define DIC 0x10 /* Disable Internal Cycles */ | |
840 | #define DDAC 0x08 /* Disable Dual Address Cycle */ | |
841 | #define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */ | |
842 | #define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */ | |
843 | #define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */ | |
844 | ||
845 | /*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */ | |
846 | /*5a*/ u16 nc_5a_; | |
847 | ||
848 | /*5c*/ u8 nc_scr0; /* Working register B */ | |
849 | /*5d*/ u8 nc_scr1; /* */ | |
850 | /*5e*/ u8 nc_scr2; /* */ | |
851 | /*5f*/ u8 nc_scr3; /* */ | |
852 | ||
853 | /*60*/ u8 nc_scrx[64]; /* Working register C-R */ | |
854 | /*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */ | |
855 | /*a4*/ u32 nc_mmws; /* Memory Move Write Selector */ | |
856 | /*a8*/ u32 nc_sfs; /* Script Fetch Selector */ | |
857 | /*ac*/ u32 nc_drs; /* DSA Relative Selector */ | |
858 | /*b0*/ u32 nc_sbms; /* Static Block Move Selector */ | |
859 | /*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */ | |
860 | /*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */ | |
861 | /*bc*/ u16 nc_scntl4; /* C1010 only */ | |
862 | #define U3EN 0x80 /* Enable Ultra 3 */ | |
863 | #define AIPEN 0x40 /* Allow check upper byte lanes */ | |
864 | #define XCLKH_DT 0x08 /* Extra clock of data hold on DT | |
865 | transfer edge */ | |
866 | #define XCLKH_ST 0x04 /* Extra clock of data hold on ST | |
867 | transfer edge */ | |
868 | ||
869 | /*be*/ u8 nc_aipcntl0; /* Epat Control 1 C1010 only */ | |
870 | /*bf*/ u8 nc_aipcntl1; /* AIP Control C1010_66 Only */ | |
871 | ||
872 | /*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */ | |
873 | /*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */ | |
874 | /*c8*/ u8 nc_rbc; /* Remaining Byte Count */ | |
875 | /*c9*/ u8 nc_rbc1; /* */ | |
876 | /*ca*/ u8 nc_rbc2; /* */ | |
877 | /*cb*/ u8 nc_rbc3; /* */ | |
878 | ||
879 | /*cc*/ u8 nc_ua; /* Updated Address */ | |
880 | /*cd*/ u8 nc_ua1; /* */ | |
881 | /*ce*/ u8 nc_ua2; /* */ | |
882 | /*cf*/ u8 nc_ua3; /* */ | |
883 | /*d0*/ u32 nc_esa; /* Entry Storage Address */ | |
884 | /*d4*/ u8 nc_ia; /* Instruction Address */ | |
885 | /*d5*/ u8 nc_ia1; | |
886 | /*d6*/ u8 nc_ia2; | |
887 | /*d7*/ u8 nc_ia3; | |
888 | /*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */ | |
889 | /*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */ | |
890 | ||
891 | /* Following for C1010 only */ | |
892 | /*e0*/ u16 nc_crcpad; /* CRC Value */ | |
893 | /*e2*/ u8 nc_crccntl0; /* CRC control register */ | |
894 | #define SNDCRC 0x10 /* Send CRC Request */ | |
895 | /*e3*/ u8 nc_crccntl1; /* CRC control register */ | |
896 | /*e4*/ u32 nc_crcdata; /* CRC data register */ | |
897 | /*e8*/ u32 nc_e8_; /* rsvd */ | |
898 | /*ec*/ u32 nc_ec_; /* rsvd */ | |
899 | /*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */ | |
900 | ||
901 | }; | |
902 | ||
903 | /*----------------------------------------------------------- | |
904 | ** | |
905 | ** Utility macros for the script. | |
906 | ** | |
907 | **----------------------------------------------------------- | |
908 | */ | |
909 | ||
910 | #define REGJ(p,r) (offsetof(struct ncr_reg, p ## r)) | |
911 | #define REG(r) REGJ (nc_, r) | |
912 | ||
913 | typedef u32 ncrcmd; | |
914 | ||
915 | /*----------------------------------------------------------- | |
916 | ** | |
917 | ** SCSI phases | |
918 | ** | |
919 | ** DT phases illegal for ncr driver. | |
920 | ** | |
921 | **----------------------------------------------------------- | |
922 | */ | |
923 | ||
924 | #define SCR_DATA_OUT 0x00000000 | |
925 | #define SCR_DATA_IN 0x01000000 | |
926 | #define SCR_COMMAND 0x02000000 | |
927 | #define SCR_STATUS 0x03000000 | |
928 | #define SCR_DT_DATA_OUT 0x04000000 | |
929 | #define SCR_DT_DATA_IN 0x05000000 | |
930 | #define SCR_MSG_OUT 0x06000000 | |
931 | #define SCR_MSG_IN 0x07000000 | |
932 | ||
933 | #define SCR_ILG_OUT 0x04000000 | |
934 | #define SCR_ILG_IN 0x05000000 | |
935 | ||
936 | /*----------------------------------------------------------- | |
937 | ** | |
938 | ** Data transfer via SCSI. | |
939 | ** | |
940 | **----------------------------------------------------------- | |
941 | ** | |
942 | ** MOVE_ABS (LEN) | |
943 | ** <<start address>> | |
944 | ** | |
945 | ** MOVE_IND (LEN) | |
946 | ** <<dnad_offset>> | |
947 | ** | |
948 | ** MOVE_TBL | |
949 | ** <<dnad_offset>> | |
950 | ** | |
951 | **----------------------------------------------------------- | |
952 | */ | |
953 | ||
954 | #define OPC_MOVE 0x08000000 | |
955 | ||
956 | #define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l)) | |
957 | #define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l)) | |
958 | #define SCR_MOVE_TBL (0x10000000 | OPC_MOVE) | |
959 | ||
960 | #define SCR_CHMOV_ABS(l) ((0x00000000) | (l)) | |
961 | #define SCR_CHMOV_IND(l) ((0x20000000) | (l)) | |
962 | #define SCR_CHMOV_TBL (0x10000000) | |
963 | ||
964 | struct scr_tblmove { | |
965 | u32 size; | |
966 | u32 addr; | |
967 | }; | |
968 | ||
969 | /*----------------------------------------------------------- | |
970 | ** | |
971 | ** Selection | |
972 | ** | |
973 | **----------------------------------------------------------- | |
974 | ** | |
975 | ** SEL_ABS | SCR_ID (0..15) [ | REL_JMP] | |
976 | ** <<alternate_address>> | |
977 | ** | |
978 | ** SEL_TBL | << dnad_offset>> [ | REL_JMP] | |
979 | ** <<alternate_address>> | |
980 | ** | |
981 | **----------------------------------------------------------- | |
982 | */ | |
983 | ||
984 | #define SCR_SEL_ABS 0x40000000 | |
985 | #define SCR_SEL_ABS_ATN 0x41000000 | |
986 | #define SCR_SEL_TBL 0x42000000 | |
987 | #define SCR_SEL_TBL_ATN 0x43000000 | |
988 | ||
989 | ||
990 | #ifdef SCSI_NCR_BIG_ENDIAN | |
991 | struct scr_tblsel { | |
992 | u8 sel_scntl3; | |
993 | u8 sel_id; | |
994 | u8 sel_sxfer; | |
995 | u8 sel_scntl4; | |
996 | }; | |
997 | #else | |
998 | struct scr_tblsel { | |
999 | u8 sel_scntl4; | |
1000 | u8 sel_sxfer; | |
1001 | u8 sel_id; | |
1002 | u8 sel_scntl3; | |
1003 | }; | |
1004 | #endif | |
1005 | ||
1006 | #define SCR_JMP_REL 0x04000000 | |
1007 | #define SCR_ID(id) (((u32)(id)) << 16) | |
1008 | ||
1009 | /*----------------------------------------------------------- | |
1010 | ** | |
1011 | ** Waiting for Disconnect or Reselect | |
1012 | ** | |
1013 | **----------------------------------------------------------- | |
1014 | ** | |
1015 | ** WAIT_DISC | |
1016 | ** dummy: <<alternate_address>> | |
1017 | ** | |
1018 | ** WAIT_RESEL | |
1019 | ** <<alternate_address>> | |
1020 | ** | |
1021 | **----------------------------------------------------------- | |
1022 | */ | |
1023 | ||
1024 | #define SCR_WAIT_DISC 0x48000000 | |
1025 | #define SCR_WAIT_RESEL 0x50000000 | |
1026 | ||
1027 | /*----------------------------------------------------------- | |
1028 | ** | |
1029 | ** Bit Set / Reset | |
1030 | ** | |
1031 | **----------------------------------------------------------- | |
1032 | ** | |
1033 | ** SET (flags {|.. }) | |
1034 | ** | |
1035 | ** CLR (flags {|.. }) | |
1036 | ** | |
1037 | **----------------------------------------------------------- | |
1038 | */ | |
1039 | ||
1040 | #define SCR_SET(f) (0x58000000 | (f)) | |
1041 | #define SCR_CLR(f) (0x60000000 | (f)) | |
1042 | ||
1043 | #define SCR_CARRY 0x00000400 | |
1044 | #define SCR_TRG 0x00000200 | |
1045 | #define SCR_ACK 0x00000040 | |
1046 | #define SCR_ATN 0x00000008 | |
1047 | ||
1048 | ||
1049 | ||
1050 | ||
1051 | /*----------------------------------------------------------- | |
1052 | ** | |
1053 | ** Memory to memory move | |
1054 | ** | |
1055 | **----------------------------------------------------------- | |
1056 | ** | |
1057 | ** COPY (bytecount) | |
1058 | ** << source_address >> | |
1059 | ** << destination_address >> | |
1060 | ** | |
1061 | ** SCR_COPY sets the NO FLUSH option by default. | |
1062 | ** SCR_COPY_F does not set this option. | |
1063 | ** | |
1064 | ** For chips which do not support this option, | |
1065 | ** ncr_copy_and_bind() will remove this bit. | |
1066 | **----------------------------------------------------------- | |
1067 | */ | |
1068 | ||
1069 | #define SCR_NO_FLUSH 0x01000000 | |
1070 | ||
1071 | #define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n)) | |
1072 | #define SCR_COPY_F(n) (0xc0000000 | (n)) | |
1073 | ||
1074 | /*----------------------------------------------------------- | |
1075 | ** | |
1076 | ** Register move and binary operations | |
1077 | ** | |
1078 | **----------------------------------------------------------- | |
1079 | ** | |
1080 | ** SFBR_REG (reg, op, data) reg = SFBR op data | |
1081 | ** << 0 >> | |
1082 | ** | |
1083 | ** REG_SFBR (reg, op, data) SFBR = reg op data | |
1084 | ** << 0 >> | |
1085 | ** | |
1086 | ** REG_REG (reg, op, data) reg = reg op data | |
1087 | ** << 0 >> | |
1088 | ** | |
1089 | **----------------------------------------------------------- | |
1090 | ** On 810A, 860, 825A, 875, 895 and 896 chips the content | |
1091 | ** of SFBR register can be used as data (SCR_SFBR_DATA). | |
0779bf2d | 1092 | ** The 896 has additional IO registers starting at |
19c65091 MW |
1093 | ** offset 0x80. Bit 7 of register offset is stored in |
1094 | ** bit 7 of the SCRIPTS instruction first DWORD. | |
1095 | **----------------------------------------------------------- | |
1096 | */ | |
1097 | ||
1098 | #define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80)) | |
1099 | ||
1100 | #define SCR_SFBR_REG(reg,op,data) \ | |
1101 | (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) | |
1102 | ||
1103 | #define SCR_REG_SFBR(reg,op,data) \ | |
1104 | (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) | |
1105 | ||
1106 | #define SCR_REG_REG(reg,op,data) \ | |
1107 | (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) | |
1108 | ||
1109 | ||
1110 | #define SCR_LOAD 0x00000000 | |
1111 | #define SCR_SHL 0x01000000 | |
1112 | #define SCR_OR 0x02000000 | |
1113 | #define SCR_XOR 0x03000000 | |
1114 | #define SCR_AND 0x04000000 | |
1115 | #define SCR_SHR 0x05000000 | |
1116 | #define SCR_ADD 0x06000000 | |
1117 | #define SCR_ADDC 0x07000000 | |
1118 | ||
1119 | #define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */ | |
1120 | ||
1121 | /*----------------------------------------------------------- | |
1122 | ** | |
1123 | ** FROM_REG (reg) SFBR = reg | |
1124 | ** << 0 >> | |
1125 | ** | |
1126 | ** TO_REG (reg) reg = SFBR | |
1127 | ** << 0 >> | |
1128 | ** | |
1129 | ** LOAD_REG (reg, data) reg = <data> | |
1130 | ** << 0 >> | |
1131 | ** | |
1132 | ** LOAD_SFBR(data) SFBR = <data> | |
1133 | ** << 0 >> | |
1134 | ** | |
1135 | **----------------------------------------------------------- | |
1136 | */ | |
1137 | ||
1138 | #define SCR_FROM_REG(reg) \ | |
1139 | SCR_REG_SFBR(reg,SCR_OR,0) | |
1140 | ||
1141 | #define SCR_TO_REG(reg) \ | |
1142 | SCR_SFBR_REG(reg,SCR_OR,0) | |
1143 | ||
1144 | #define SCR_LOAD_REG(reg,data) \ | |
1145 | SCR_REG_REG(reg,SCR_LOAD,data) | |
1146 | ||
1147 | #define SCR_LOAD_SFBR(data) \ | |
1148 | (SCR_REG_SFBR (gpreg, SCR_LOAD, data)) | |
1149 | ||
1150 | /*----------------------------------------------------------- | |
1151 | ** | |
1152 | ** LOAD from memory to register. | |
1153 | ** STORE from register to memory. | |
1154 | ** | |
1155 | ** Only supported by 810A, 860, 825A, 875, 895 and 896. | |
1156 | ** | |
1157 | **----------------------------------------------------------- | |
1158 | ** | |
1159 | ** LOAD_ABS (LEN) | |
1160 | ** <<start address>> | |
1161 | ** | |
1162 | ** LOAD_REL (LEN) (DSA relative) | |
1163 | ** <<dsa_offset>> | |
1164 | ** | |
1165 | **----------------------------------------------------------- | |
1166 | */ | |
1167 | ||
1168 | #define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul) | |
1169 | #define SCR_NO_FLUSH2 0x02000000 | |
1170 | #define SCR_DSA_REL2 0x10000000 | |
1171 | ||
1172 | #define SCR_LOAD_R(reg, how, n) \ | |
1173 | (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n)) | |
1174 | ||
1175 | #define SCR_STORE_R(reg, how, n) \ | |
1176 | (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n)) | |
1177 | ||
1178 | #define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n) | |
1179 | #define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n) | |
1180 | #define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n) | |
1181 | #define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n) | |
1182 | ||
1183 | #define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n) | |
1184 | #define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n) | |
1185 | #define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n) | |
1186 | #define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n) | |
1187 | ||
1188 | ||
1189 | /*----------------------------------------------------------- | |
1190 | ** | |
1191 | ** Waiting for Disconnect or Reselect | |
1192 | ** | |
1193 | **----------------------------------------------------------- | |
1194 | ** | |
1195 | ** JUMP [ | IFTRUE/IFFALSE ( ... ) ] | |
1196 | ** <<address>> | |
1197 | ** | |
1198 | ** JUMPR [ | IFTRUE/IFFALSE ( ... ) ] | |
1199 | ** <<distance>> | |
1200 | ** | |
1201 | ** CALL [ | IFTRUE/IFFALSE ( ... ) ] | |
1202 | ** <<address>> | |
1203 | ** | |
1204 | ** CALLR [ | IFTRUE/IFFALSE ( ... ) ] | |
1205 | ** <<distance>> | |
1206 | ** | |
1207 | ** RETURN [ | IFTRUE/IFFALSE ( ... ) ] | |
1208 | ** <<dummy>> | |
1209 | ** | |
1210 | ** INT [ | IFTRUE/IFFALSE ( ... ) ] | |
1211 | ** <<ident>> | |
1212 | ** | |
1213 | ** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ] | |
1214 | ** <<ident>> | |
1215 | ** | |
1216 | ** Conditions: | |
1217 | ** WHEN (phase) | |
1218 | ** IF (phase) | |
1219 | ** CARRYSET | |
1220 | ** DATA (data, mask) | |
1221 | ** | |
1222 | **----------------------------------------------------------- | |
1223 | */ | |
1224 | ||
1225 | #define SCR_NO_OP 0x80000000 | |
1226 | #define SCR_JUMP 0x80080000 | |
1227 | #define SCR_JUMP64 0x80480000 | |
1228 | #define SCR_JUMPR 0x80880000 | |
1229 | #define SCR_CALL 0x88080000 | |
1230 | #define SCR_CALLR 0x88880000 | |
1231 | #define SCR_RETURN 0x90080000 | |
1232 | #define SCR_INT 0x98080000 | |
1233 | #define SCR_INT_FLY 0x98180000 | |
1234 | ||
1235 | #define IFFALSE(arg) (0x00080000 | (arg)) | |
1236 | #define IFTRUE(arg) (0x00000000 | (arg)) | |
1237 | ||
1238 | #define WHEN(phase) (0x00030000 | (phase)) | |
1239 | #define IF(phase) (0x00020000 | (phase)) | |
1240 | ||
1241 | #define DATA(D) (0x00040000 | ((D) & 0xff)) | |
1242 | #define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff)) | |
1243 | ||
1244 | #define CARRYSET (0x00200000) | |
1245 | ||
1246 | /*----------------------------------------------------------- | |
1247 | ** | |
1248 | ** SCSI constants. | |
1249 | ** | |
1250 | **----------------------------------------------------------- | |
1251 | */ | |
1252 | ||
19c65091 MW |
1253 | /* |
1254 | ** Status | |
1255 | */ | |
1256 | ||
1257 | #define S_GOOD (0x00) | |
1258 | #define S_CHECK_COND (0x02) | |
1259 | #define S_COND_MET (0x04) | |
1260 | #define S_BUSY (0x08) | |
1261 | #define S_INT (0x10) | |
1262 | #define S_INT_COND_MET (0x14) | |
1263 | #define S_CONFLICT (0x18) | |
1264 | #define S_TERMINATED (0x20) | |
1265 | #define S_QUEUE_FULL (0x28) | |
1266 | #define S_ILLEGAL (0xff) | |
1267 | #define S_SENSE (0x80) | |
1268 | ||
1269 | /* | |
1270 | * End of ncrreg from FreeBSD | |
1271 | */ | |
1da177e4 LT |
1272 | |
1273 | /* | |
1274 | Build a scatter/gather entry. | |
1275 | see sym53c8xx_2/sym_hipd.h for more detailed sym_build_sge() | |
1276 | implementation ;) | |
1277 | */ | |
1278 | ||
1279 | #define ncr_build_sge(np, data, badd, len) \ | |
1280 | do { \ | |
1281 | (data)->addr = cpu_to_scr(badd); \ | |
1282 | (data)->size = cpu_to_scr(len); \ | |
1283 | } while (0) | |
1284 | ||
1285 | /*========================================================== | |
1286 | ** | |
1287 | ** Structures used by the detection routine to transmit | |
1288 | ** device configuration to the attach function. | |
1289 | ** | |
1290 | **========================================================== | |
1291 | */ | |
1292 | struct ncr_slot { | |
1293 | u_long base; | |
1294 | u_long base_2; | |
1295 | u_long base_c; | |
1296 | u_long base_2_c; | |
1297 | void __iomem *base_v; | |
1298 | void __iomem *base_2_v; | |
1299 | int irq; | |
1300 | /* port and reg fields to use INB, OUTB macros */ | |
1301 | volatile struct ncr_reg __iomem *reg; | |
1302 | }; | |
1303 | ||
1304 | /*========================================================== | |
1305 | ** | |
1306 | ** Structure used by detection routine to save data on | |
1307 | ** each detected board for attach. | |
1308 | ** | |
1309 | **========================================================== | |
1310 | */ | |
1311 | struct ncr_device { | |
1312 | struct device *dev; | |
1313 | struct ncr_slot slot; | |
1314 | struct ncr_chip chip; | |
1315 | u_char host_id; | |
1316 | u8 differential; | |
1317 | }; | |
1318 | ||
1319 | extern struct Scsi_Host *ncr_attach(struct scsi_host_template *tpnt, int unit, struct ncr_device *device); | |
dffe807c | 1320 | extern void ncr53c8xx_release(struct Scsi_Host *host); |
7d12e780 | 1321 | irqreturn_t ncr53c8xx_intr(int irq, void *dev_id); |
1da177e4 LT |
1322 | extern int ncr53c8xx_init(void); |
1323 | extern void ncr53c8xx_exit(void); | |
1324 | ||
1325 | #endif /* NCR53C8XX_H */ |