Commit | Line | Data |
---|---|---|
1da177e4 | 1 | #define PSEUDO_DMA |
1da177e4 | 2 | #define UNSAFE /* Not unsafe for PAS16 -- use it */ |
44456d37 | 3 | #define PDEBUG 0 |
1da177e4 LT |
4 | |
5 | /* | |
6 | * This driver adapted from Drew Eckhardt's Trantor T128 driver | |
7 | * | |
8 | * Copyright 1993, Drew Eckhardt | |
9 | * Visionary Computing | |
10 | * (Unix and Linux consulting and custom programming) | |
11 | * drew@colorado.edu | |
12 | * +1 (303) 666-5836 | |
13 | * | |
14 | * ( Based on T128 - DISTRIBUTION RELEASE 3. ) | |
15 | * | |
16 | * Modified to work with the Pro Audio Spectrum/Studio 16 | |
17 | * by John Weidman. | |
18 | * | |
19 | * | |
20 | * For more information, please consult | |
21 | * | |
22 | * Media Vision | |
23 | * (510) 770-8600 | |
24 | * (800) 348-7116 | |
1da177e4 LT |
25 | */ |
26 | ||
27 | /* | |
1da177e4 LT |
28 | * The card is detected and initialized in one of several ways : |
29 | * 1. Autoprobe (default) - There are many different models of | |
30 | * the Pro Audio Spectrum/Studio 16, and I only have one of | |
31 | * them, so this may require a little tweaking. An interrupt | |
32 | * is triggered to autoprobe for the interrupt line. Note: | |
33 | * with the newer model boards, the interrupt is set via | |
34 | * software after reset using the default_irq for the | |
35 | * current board number. | |
36 | * | |
37 | * 2. With command line overrides - pas16=port,irq may be | |
38 | * used on the LILO command line to override the defaults. | |
39 | * | |
40 | * 3. With the PAS16_OVERRIDE compile time define. This is | |
41 | * specified as an array of address, irq tuples. Ie, for | |
42 | * one board at the default 0x388 address, IRQ10, I could say | |
43 | * -DPAS16_OVERRIDE={{0x388, 10}} | |
44 | * NOTE: Untested. | |
45 | * | |
46 | * 4. When included as a module, with arguments passed on the command line: | |
47 | * pas16_irq=xx the interrupt | |
48 | * pas16_addr=xx the port | |
49 | * e.g. "modprobe pas16 pas16_addr=0x388 pas16_irq=5" | |
50 | * | |
51 | * Note that if the override methods are used, place holders must | |
52 | * be specified for other boards in the system. | |
53 | * | |
54 | * | |
55 | * Configuration notes : | |
56 | * The current driver does not support interrupt sharing with the | |
57 | * sound portion of the card. If you use the same irq for the | |
58 | * scsi port and sound you will have problems. Either use | |
59 | * a different irq for the scsi port or don't use interrupts | |
60 | * for the scsi port. | |
61 | * | |
62 | * If you have problems with your card not being recognized, use | |
63 | * the LILO command line override. Try to get it recognized without | |
64 | * interrupts. Ie, for a board at the default 0x388 base port, | |
22f5f10d | 65 | * boot: linux pas16=0x388,0 |
1da177e4 | 66 | * |
22f5f10d | 67 | * NO_IRQ (0) should be specified for no interrupt, |
1da177e4 LT |
68 | * IRQ_AUTO (254) to autoprobe for an IRQ line if overridden |
69 | * on the command line. | |
1da177e4 LT |
70 | */ |
71 | ||
72 | #include <linux/module.h> | |
73 | ||
1da177e4 LT |
74 | #include <linux/signal.h> |
75 | #include <linux/proc_fs.h> | |
1da177e4 LT |
76 | #include <asm/io.h> |
77 | #include <asm/dma.h> | |
78 | #include <linux/blkdev.h> | |
79 | #include <linux/delay.h> | |
80 | #include <linux/interrupt.h> | |
81 | #include <linux/stat.h> | |
82 | #include <linux/init.h> | |
83 | ||
1da177e4 LT |
84 | #include <scsi/scsi_host.h> |
85 | #include "pas16.h" | |
86 | #define AUTOPROBE_IRQ | |
87 | #include "NCR5380.h" | |
88 | ||
89 | ||
1da177e4 LT |
90 | static unsigned short pas16_addr = 0; |
91 | static int pas16_irq = 0; | |
92 | ||
93 | ||
408b664a | 94 | static const int scsi_irq_translate[] = |
1da177e4 LT |
95 | { 0, 0, 1, 2, 3, 4, 5, 6, 0, 0, 7, 8, 9, 0, 10, 11 }; |
96 | ||
97 | /* The default_irqs array contains values used to set the irq into the | |
98 | * board via software (as must be done on newer model boards without | |
99 | * irq jumpers on the board). The first value in the array will be | |
100 | * assigned to logical board 0, the next to board 1, etc. | |
101 | */ | |
408b664a | 102 | static int default_irqs[] __initdata = |
1da177e4 LT |
103 | { PAS16_DEFAULT_BOARD_1_IRQ, |
104 | PAS16_DEFAULT_BOARD_2_IRQ, | |
105 | PAS16_DEFAULT_BOARD_3_IRQ, | |
106 | PAS16_DEFAULT_BOARD_4_IRQ | |
107 | }; | |
108 | ||
109 | static struct override { | |
110 | unsigned short io_port; | |
111 | int irq; | |
6391a113 | 112 | } overrides |
1da177e4 LT |
113 | #ifdef PAS16_OVERRIDE |
114 | [] __initdata = PAS16_OVERRIDE; | |
115 | #else | |
116 | [4] __initdata = {{0,IRQ_AUTO}, {0,IRQ_AUTO}, {0,IRQ_AUTO}, | |
117 | {0,IRQ_AUTO}}; | |
118 | #endif | |
119 | ||
6391a113 | 120 | #define NO_OVERRIDES ARRAY_SIZE(overrides) |
1da177e4 LT |
121 | |
122 | static struct base { | |
123 | unsigned short io_port; | |
124 | int noauto; | |
6391a113 | 125 | } bases[] __initdata = |
1da177e4 LT |
126 | { {PAS16_DEFAULT_BASE_1, 0}, |
127 | {PAS16_DEFAULT_BASE_2, 0}, | |
128 | {PAS16_DEFAULT_BASE_3, 0}, | |
129 | {PAS16_DEFAULT_BASE_4, 0} | |
130 | }; | |
131 | ||
6391a113 | 132 | #define NO_BASES ARRAY_SIZE(bases) |
1da177e4 | 133 | |
408b664a | 134 | static const unsigned short pas16_offset[ 8 ] = |
1da177e4 LT |
135 | { |
136 | 0x1c00, /* OUTPUT_DATA_REG */ | |
137 | 0x1c01, /* INITIATOR_COMMAND_REG */ | |
138 | 0x1c02, /* MODE_REG */ | |
139 | 0x1c03, /* TARGET_COMMAND_REG */ | |
140 | 0x3c00, /* STATUS_REG ro, SELECT_ENABLE_REG wo */ | |
141 | 0x3c01, /* BUS_AND_STATUS_REG ro, START_DMA_SEND_REG wo */ | |
142 | 0x3c02, /* INPUT_DATA_REGISTER ro, (N/A on PAS16 ?) | |
143 | * START_DMA_TARGET_RECEIVE_REG wo | |
144 | */ | |
145 | 0x3c03, /* RESET_PARITY_INTERRUPT_REG ro, | |
146 | * START_DMA_INITIATOR_RECEIVE_REG wo | |
147 | */ | |
148 | }; | |
149 | /*----------------------------------------------------------------*/ | |
150 | /* the following will set the monitor border color (useful to find | |
151 | where something crashed or gets stuck at */ | |
152 | /* 1 = blue | |
153 | 2 = green | |
154 | 3 = cyan | |
155 | 4 = red | |
156 | 5 = magenta | |
157 | 6 = yellow | |
158 | 7 = white | |
159 | */ | |
160 | #if 1 | |
161 | #define rtrc(i) {inb(0x3da); outb(0x31, 0x3c0); outb((i), 0x3c0);} | |
162 | #else | |
163 | #define rtrc(i) {} | |
164 | #endif | |
165 | ||
166 | ||
167 | /* | |
168 | * Function : enable_board( int board_num, unsigned short port ) | |
169 | * | |
170 | * Purpose : set address in new model board | |
171 | * | |
172 | * Inputs : board_num - logical board number 0-3, port - base address | |
173 | * | |
174 | */ | |
175 | ||
176 | static void __init | |
177 | enable_board( int board_num, unsigned short port ) | |
178 | { | |
179 | outb( 0xbc + board_num, MASTER_ADDRESS_PTR ); | |
180 | outb( port >> 2, MASTER_ADDRESS_PTR ); | |
181 | } | |
182 | ||
183 | ||
184 | ||
185 | /* | |
186 | * Function : init_board( unsigned short port, int irq ) | |
187 | * | |
188 | * Purpose : Set the board up to handle the SCSI interface | |
189 | * | |
190 | * Inputs : port - base address of the board, | |
191 | * irq - irq to assign to the SCSI port | |
192 | * force_irq - set it even if it conflicts with sound driver | |
193 | * | |
194 | */ | |
195 | ||
196 | static void __init | |
197 | init_board( unsigned short io_port, int irq, int force_irq ) | |
198 | { | |
199 | unsigned int tmp; | |
200 | unsigned int pas_irq_code; | |
201 | ||
202 | /* Initialize the SCSI part of the board */ | |
203 | ||
204 | outb( 0x30, io_port + P_TIMEOUT_COUNTER_REG ); /* Timeout counter */ | |
205 | outb( 0x01, io_port + P_TIMEOUT_STATUS_REG_OFFSET ); /* Reset TC */ | |
206 | outb( 0x01, io_port + WAIT_STATE ); /* 1 Wait state */ | |
207 | ||
208 | NCR5380_read( RESET_PARITY_INTERRUPT_REG ); | |
209 | ||
210 | /* Set the SCSI interrupt pointer without mucking up the sound | |
211 | * interrupt pointer in the same byte. | |
212 | */ | |
213 | pas_irq_code = ( irq < 16 ) ? scsi_irq_translate[irq] : 0; | |
214 | tmp = inb( io_port + IO_CONFIG_3 ); | |
215 | ||
216 | if( (( tmp & 0x0f ) == pas_irq_code) && pas_irq_code > 0 | |
217 | && !force_irq ) | |
218 | { | |
219 | printk( "pas16: WARNING: Can't use same irq as sound " | |
220 | "driver -- interrupts disabled\n" ); | |
221 | /* Set up the drive parameters, disable 5380 interrupts */ | |
222 | outb( 0x4d, io_port + SYS_CONFIG_4 ); | |
223 | } | |
224 | else | |
225 | { | |
226 | tmp = ( tmp & 0x0f ) | ( pas_irq_code << 4 ); | |
227 | outb( tmp, io_port + IO_CONFIG_3 ); | |
228 | ||
229 | /* Set up the drive parameters and enable 5380 interrupts */ | |
230 | outb( 0x6d, io_port + SYS_CONFIG_4 ); | |
231 | } | |
232 | } | |
233 | ||
234 | ||
235 | /* | |
236 | * Function : pas16_hw_detect( unsigned short board_num ) | |
237 | * | |
238 | * Purpose : determine if a pas16 board is present | |
239 | * | |
240 | * Inputs : board_num - logical board number ( 0 - 3 ) | |
241 | * | |
242 | * Returns : 0 if board not found, 1 if found. | |
243 | */ | |
244 | ||
245 | static int __init | |
246 | pas16_hw_detect( unsigned short board_num ) | |
247 | { | |
248 | unsigned char board_rev, tmp; | |
249 | unsigned short io_port = bases[ board_num ].io_port; | |
250 | ||
251 | /* See if we can find a PAS16 board at the address associated | |
252 | * with this logical board number. | |
253 | */ | |
254 | ||
255 | /* First, attempt to take a newer model board out of reset and | |
256 | * give it a base address. This shouldn't affect older boards. | |
257 | */ | |
258 | enable_board( board_num, io_port ); | |
259 | ||
260 | /* Now see if it looks like a PAS16 board */ | |
261 | board_rev = inb( io_port + PCB_CONFIG ); | |
262 | ||
263 | if( board_rev == 0xff ) | |
264 | return 0; | |
265 | ||
266 | tmp = board_rev ^ 0xe0; | |
267 | ||
268 | outb( tmp, io_port + PCB_CONFIG ); | |
269 | tmp = inb( io_port + PCB_CONFIG ); | |
270 | outb( board_rev, io_port + PCB_CONFIG ); | |
271 | ||
272 | if( board_rev != tmp ) /* Not a PAS-16 */ | |
273 | return 0; | |
274 | ||
275 | if( ( inb( io_port + OPERATION_MODE_1 ) & 0x03 ) != 0x03 ) | |
276 | return 0; /* return if no SCSI interface found */ | |
277 | ||
278 | /* Mediavision has some new model boards that return ID bits | |
279 | * that indicate a SCSI interface, but they're not (LMS). We'll | |
280 | * put in an additional test to try to weed them out. | |
281 | */ | |
282 | ||
283 | outb( 0x01, io_port + WAIT_STATE ); /* 1 Wait state */ | |
284 | NCR5380_write( MODE_REG, 0x20 ); /* Is it really SCSI? */ | |
285 | if( NCR5380_read( MODE_REG ) != 0x20 ) /* Write to a reg. */ | |
286 | return 0; /* and try to read */ | |
287 | NCR5380_write( MODE_REG, 0x00 ); /* it back. */ | |
288 | if( NCR5380_read( MODE_REG ) != 0x00 ) | |
289 | return 0; | |
290 | ||
291 | return 1; | |
292 | } | |
293 | ||
294 | ||
925e4610 | 295 | #ifndef MODULE |
1da177e4 LT |
296 | /* |
297 | * Function : pas16_setup(char *str, int *ints) | |
298 | * | |
299 | * Purpose : LILO command line initialization of the overrides array, | |
300 | * | |
301 | * Inputs : str - unused, ints - array of integer parameters with ints[0] | |
302 | * equal to the number of ints. | |
303 | * | |
304 | */ | |
305 | ||
925e4610 | 306 | static int __init pas16_setup(char *str) |
1da177e4 LT |
307 | { |
308 | static int commandline_current = 0; | |
309 | int i; | |
925e4610 FT |
310 | int ints[10]; |
311 | ||
312 | get_options(str, ARRAY_SIZE(ints), ints); | |
1da177e4 LT |
313 | if (ints[0] != 2) |
314 | printk("pas16_setup : usage pas16=io_port,irq\n"); | |
315 | else | |
316 | if (commandline_current < NO_OVERRIDES) { | |
317 | overrides[commandline_current].io_port = (unsigned short) ints[1]; | |
318 | overrides[commandline_current].irq = ints[2]; | |
319 | for (i = 0; i < NO_BASES; ++i) | |
320 | if (bases[i].io_port == (unsigned short) ints[1]) { | |
321 | bases[i].noauto = 1; | |
322 | break; | |
323 | } | |
324 | ++commandline_current; | |
325 | } | |
925e4610 | 326 | return 1; |
1da177e4 LT |
327 | } |
328 | ||
925e4610 FT |
329 | __setup("pas16=", pas16_setup); |
330 | #endif | |
331 | ||
1da177e4 | 332 | /* |
d0be4a7d | 333 | * Function : int pas16_detect(struct scsi_host_template * tpnt) |
1da177e4 LT |
334 | * |
335 | * Purpose : detects and initializes PAS16 controllers | |
336 | * that were autoprobed, overridden on the LILO command line, | |
337 | * or specified at compile time. | |
338 | * | |
339 | * Inputs : tpnt - template for this SCSI adapter. | |
340 | * | |
341 | * Returns : 1 if a host adapter was found, 0 if not. | |
342 | * | |
343 | */ | |
344 | ||
ed8b9e7f | 345 | static int __init pas16_detect(struct scsi_host_template *tpnt) |
1da177e4 LT |
346 | { |
347 | static int current_override = 0; | |
348 | static unsigned short current_base = 0; | |
349 | struct Scsi_Host *instance; | |
350 | unsigned short io_port; | |
351 | int count; | |
352 | ||
1da177e4 LT |
353 | if (pas16_addr != 0) { |
354 | overrides[0].io_port = pas16_addr; | |
355 | /* | |
356 | * This is how we avoid seeing more than | |
357 | * one host adapter at the same I/O port. | |
358 | * Cribbed shamelessly from pas16_setup(). | |
359 | */ | |
360 | for (count = 0; count < NO_BASES; ++count) | |
361 | if (bases[count].io_port == pas16_addr) { | |
362 | bases[count].noauto = 1; | |
363 | break; | |
364 | } | |
365 | } | |
366 | if (pas16_irq != 0) | |
367 | overrides[0].irq = pas16_irq; | |
368 | ||
369 | for (count = 0; current_override < NO_OVERRIDES; ++current_override) { | |
370 | io_port = 0; | |
371 | ||
372 | if (overrides[current_override].io_port) | |
373 | { | |
374 | io_port = overrides[current_override].io_port; | |
375 | enable_board( current_override, io_port ); | |
376 | init_board( io_port, overrides[current_override].irq, 1 ); | |
377 | } | |
378 | else | |
379 | for (; !io_port && (current_base < NO_BASES); ++current_base) { | |
380 | #if (PDEBUG & PDEBUG_INIT) | |
381 | printk("scsi-pas16 : probing io_port %04x\n", (unsigned int) bases[current_base].io_port); | |
382 | #endif | |
383 | if ( !bases[current_base].noauto && | |
384 | pas16_hw_detect( current_base ) ){ | |
385 | io_port = bases[current_base].io_port; | |
386 | init_board( io_port, default_irqs[ current_base ], 0 ); | |
387 | #if (PDEBUG & PDEBUG_INIT) | |
388 | printk("scsi-pas16 : detected board.\n"); | |
389 | #endif | |
390 | } | |
391 | } | |
392 | ||
393 | ||
394 | #if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT) | |
395 | printk("scsi-pas16 : io_port = %04x\n", (unsigned int) io_port); | |
396 | #endif | |
397 | ||
398 | if (!io_port) | |
399 | break; | |
400 | ||
401 | instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata)); | |
402 | if(instance == NULL) | |
403 | break; | |
404 | ||
405 | instance->io_port = io_port; | |
406 | ||
407 | NCR5380_init(instance, 0); | |
408 | ||
409 | if (overrides[current_override].irq != IRQ_AUTO) | |
410 | instance->irq = overrides[current_override].irq; | |
411 | else | |
412 | instance->irq = NCR5380_probe_irq(instance, PAS16_IRQS); | |
413 | ||
22f5f10d FT |
414 | /* Compatibility with documented NCR5380 kernel parameters */ |
415 | if (instance->irq == 255) | |
416 | instance->irq = NO_IRQ; | |
417 | ||
418 | if (instance->irq != NO_IRQ) | |
4909cc2b | 419 | if (request_irq(instance->irq, pas16_intr, 0, |
1e641664 | 420 | "pas16", instance)) { |
1da177e4 LT |
421 | printk("scsi%d : IRQ%d not free, interrupts disabled\n", |
422 | instance->host_no, instance->irq); | |
22f5f10d | 423 | instance->irq = NO_IRQ; |
1da177e4 LT |
424 | } |
425 | ||
22f5f10d | 426 | if (instance->irq == NO_IRQ) { |
1da177e4 LT |
427 | printk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no); |
428 | printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no); | |
429 | /* Disable 5380 interrupts, leave drive params the same */ | |
430 | outb( 0x4d, io_port + SYS_CONFIG_4 ); | |
431 | outb( (inb(io_port + IO_CONFIG_3) & 0x0f), io_port + IO_CONFIG_3 ); | |
432 | } | |
433 | ||
434 | #if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT) | |
435 | printk("scsi%d : irq = %d\n", instance->host_no, instance->irq); | |
436 | #endif | |
437 | ||
1da177e4 LT |
438 | ++current_override; |
439 | ++count; | |
440 | } | |
441 | return count; | |
442 | } | |
443 | ||
444 | /* | |
445 | * Function : int pas16_biosparam(Disk *disk, struct block_device *dev, int *ip) | |
446 | * | |
447 | * Purpose : Generates a BIOS / DOS compatible H-C-S mapping for | |
448 | * the specified device / size. | |
449 | * | |
450 | * Inputs : size = size of device in sectors (512 bytes), dev = block device | |
451 | * major / minor, ip[] = {heads, sectors, cylinders} | |
452 | * | |
453 | * Returns : always 0 (success), initializes ip | |
454 | * | |
455 | */ | |
456 | ||
457 | /* | |
458 | * XXX Most SCSI boards use this mapping, I could be incorrect. Some one | |
459 | * using hard disks on a trantor should verify that this mapping corresponds | |
460 | * to that used by the BIOS / ASPI driver by running the linux fdisk program | |
461 | * and matching the H_C_S coordinates to what DOS uses. | |
462 | */ | |
463 | ||
ed8b9e7f FT |
464 | static int pas16_biosparam(struct scsi_device *sdev, struct block_device *dev, |
465 | sector_t capacity, int *ip) | |
1da177e4 LT |
466 | { |
467 | int size = capacity; | |
468 | ip[0] = 64; | |
469 | ip[1] = 32; | |
470 | ip[2] = size >> 11; /* I think I have it as /(32*64) */ | |
471 | if( ip[2] > 1024 ) { /* yes, >, not >= */ | |
472 | ip[0]=255; | |
473 | ip[1]=63; | |
474 | ip[2]=size/(63*255); | |
475 | if( ip[2] > 1023 ) /* yes >1023... */ | |
476 | ip[2] = 1023; | |
477 | } | |
478 | ||
479 | return 0; | |
480 | } | |
481 | ||
482 | /* | |
483 | * Function : int NCR5380_pread (struct Scsi_Host *instance, | |
484 | * unsigned char *dst, int len) | |
485 | * | |
486 | * Purpose : Fast 5380 pseudo-dma read function, transfers len bytes to | |
487 | * dst | |
488 | * | |
489 | * Inputs : dst = destination, len = length in bytes | |
490 | * | |
491 | * Returns : 0 on success, non zero on a failure such as a watchdog | |
492 | * timeout. | |
493 | */ | |
494 | ||
495 | static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst, | |
496 | int len) { | |
497 | register unsigned char *d = dst; | |
498 | register unsigned short reg = (unsigned short) (instance->io_port + | |
499 | P_DATA_REG_OFFSET); | |
500 | register int i = len; | |
501 | int ii = 0; | |
a9c2dc43 | 502 | struct NCR5380_hostdata *hostdata = shost_priv(instance); |
1da177e4 LT |
503 | |
504 | while ( !(inb(instance->io_port + P_STATUS_REG_OFFSET) & P_ST_RDY) ) | |
505 | ++ii; | |
506 | ||
507 | insb( reg, d, i ); | |
508 | ||
509 | if ( inb(instance->io_port + P_TIMEOUT_STATUS_REG_OFFSET) & P_TS_TIM) { | |
510 | outb( P_TS_CT, instance->io_port + P_TIMEOUT_STATUS_REG_OFFSET); | |
511 | printk("scsi%d : watchdog timer fired in NCR5380_pread()\n", | |
512 | instance->host_no); | |
513 | return -1; | |
514 | } | |
a9c2dc43 FT |
515 | if (ii > hostdata->spin_max_r) |
516 | hostdata->spin_max_r = ii; | |
1da177e4 LT |
517 | return 0; |
518 | } | |
519 | ||
520 | /* | |
521 | * Function : int NCR5380_pwrite (struct Scsi_Host *instance, | |
522 | * unsigned char *src, int len) | |
523 | * | |
524 | * Purpose : Fast 5380 pseudo-dma write function, transfers len bytes from | |
525 | * src | |
526 | * | |
527 | * Inputs : src = source, len = length in bytes | |
528 | * | |
529 | * Returns : 0 on success, non zero on a failure such as a watchdog | |
530 | * timeout. | |
531 | */ | |
532 | ||
533 | static inline int NCR5380_pwrite (struct Scsi_Host *instance, unsigned char *src, | |
534 | int len) { | |
535 | register unsigned char *s = src; | |
536 | register unsigned short reg = (instance->io_port + P_DATA_REG_OFFSET); | |
537 | register int i = len; | |
538 | int ii = 0; | |
a9c2dc43 | 539 | struct NCR5380_hostdata *hostdata = shost_priv(instance); |
1da177e4 LT |
540 | |
541 | while ( !((inb(instance->io_port + P_STATUS_REG_OFFSET)) & P_ST_RDY) ) | |
542 | ++ii; | |
543 | ||
544 | outsb( reg, s, i ); | |
545 | ||
546 | if (inb(instance->io_port + P_TIMEOUT_STATUS_REG_OFFSET) & P_TS_TIM) { | |
547 | outb( P_TS_CT, instance->io_port + P_TIMEOUT_STATUS_REG_OFFSET); | |
548 | printk("scsi%d : watchdog timer fired in NCR5380_pwrite()\n", | |
549 | instance->host_no); | |
550 | return -1; | |
551 | } | |
a9c2dc43 FT |
552 | if (ii > hostdata->spin_max_w) |
553 | hostdata->spin_max_w = ii; | |
1da177e4 LT |
554 | return 0; |
555 | } | |
556 | ||
557 | #include "NCR5380.c" | |
558 | ||
559 | static int pas16_release(struct Scsi_Host *shost) | |
560 | { | |
22f5f10d | 561 | if (shost->irq != NO_IRQ) |
1e641664 | 562 | free_irq(shost->irq, shost); |
1da177e4 | 563 | NCR5380_exit(shost); |
1da177e4 LT |
564 | if (shost->io_port && shost->n_io_port) |
565 | release_region(shost->io_port, shost->n_io_port); | |
566 | scsi_unregister(shost); | |
567 | return 0; | |
568 | } | |
569 | ||
d0be4a7d | 570 | static struct scsi_host_template driver_template = { |
1da177e4 LT |
571 | .name = "Pro Audio Spectrum-16 SCSI", |
572 | .detect = pas16_detect, | |
573 | .release = pas16_release, | |
4d3d2a54 FT |
574 | .proc_name = "pas16", |
575 | .show_info = pas16_show_info, | |
576 | .write_info = pas16_write_info, | |
8c32513b | 577 | .info = pas16_info, |
1da177e4 LT |
578 | .queuecommand = pas16_queue_command, |
579 | .eh_abort_handler = pas16_abort, | |
580 | .eh_bus_reset_handler = pas16_bus_reset, | |
1da177e4 LT |
581 | .bios_param = pas16_biosparam, |
582 | .can_queue = CAN_QUEUE, | |
583 | .this_id = 7, | |
584 | .sg_tablesize = SG_ALL, | |
585 | .cmd_per_lun = CMD_PER_LUN, | |
586 | .use_clustering = DISABLE_CLUSTERING, | |
587 | }; | |
588 | #include "scsi_module.c" | |
589 | ||
590 | #ifdef MODULE | |
591 | module_param(pas16_addr, ushort, 0); | |
592 | module_param(pas16_irq, int, 0); | |
593 | #endif | |
594 | MODULE_LICENSE("GPL"); |