[deliverable/linux.git] / drivers / scsi / pcmcia / qlogic_stub.c

/*======================================================================

    A driver for the Qlogic SCSI card

    qlogic_cs.c 1.79 2000/06/12 21:27:26

    The contents of this file are subject to the Mozilla Public
    License Version 1.1 (the "License"); you may not use this file
    except in compliance with the License. You may obtain a copy of
    the License at http://www.mozilla.org/MPL/

    Software distributed under the License is distributed on an "AS
    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
    implied. See the License for the specific language governing
    rights and limitations under the License.

    The initial developer of the original code is David A. Hinds
    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.

    Alternatively, the contents of this file may be used under the
    terms of the GNU General Public License version 2 (the "GPL"), in which
    case the provisions of the GPL are applicable instead of the
    above.  If you wish to allow the use of your version of this file
    only under the terms of the GPL and not to allow others to use
    your version of this file under the MPL, indicate your decision
    by deleting the provisions above and replace them with the notice
    and other provisions required by the GPL.  If you do not delete
    the provisions above, a recipient may use your version of this
    file under either the MPL or the GPL.
    
======================================================================*/

#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <scsi/scsi.h>
#include <linux/major.h>
#include <linux/blkdev.h>
#include <scsi/scsi_ioctl.h>
#include <linux/interrupt.h>

#include "scsi.h"
#include <scsi/scsi_host.h>
#include "../qlogicfas408.h"

#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <pcmcia/ciscode.h>

/* Set the following to 2 to use normal interrupt (active high/totempole-
 * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
 * drain
 */
#define INT_TYPE	0

static char qlogic_name[] = "qlogic_cs";

static struct scsi_host_template qlogicfas_driver_template = {
	.module			= THIS_MODULE,
	.name			= qlogic_name,
	.proc_name		= qlogic_name,
	.info			= qlogicfas408_info,
	.queuecommand		= qlogicfas408_queuecommand,
	.eh_abort_handler	= qlogicfas408_abort,
	.eh_bus_reset_handler	= qlogicfas408_bus_reset,
	.bios_param		= qlogicfas408_biosparam,
	.can_queue		= 1,
	.this_id		= -1,
	.sg_tablesize		= SG_ALL,
	.cmd_per_lun		= 1,
	.use_clustering		= DISABLE_CLUSTERING,
};

/*====================================================================*/

typedef struct scsi_info_t {
	struct pcmcia_device	*p_dev;
	struct Scsi_Host *host;
	unsigned short manf_id;
} scsi_info_t;

static void qlogic_release(struct pcmcia_device *link);
static void qlogic_detach(struct pcmcia_device *p_dev);
static int qlogic_config(struct pcmcia_device * link);

static struct Scsi_Host *qlogic_detect(struct scsi_host_template *host,
				struct pcmcia_device *link, int qbase, int qlirq)
{
	int qltyp;		/* type of chip */
	int qinitid;
	struct Scsi_Host *shost;	/* registered host structure */
	struct qlogicfas408_priv *priv;

	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
	qinitid = host->this_id;
	if (qinitid < 0)
		qinitid = 7;	/* if no ID, use 7 */

	qlogicfas408_setup(qbase, qinitid, INT_TYPE);

	host->name = qlogic_name;
	shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
	if (!shost)
		goto err;
	shost->io_port = qbase;
	shost->n_io_port = 16;
	shost->dma_channel = -1;
	if (qlirq != -1)
		shost->irq = qlirq;

	priv = get_priv_by_host(shost);
	priv->qlirq = qlirq;
	priv->qbase = qbase;
	priv->qinitid = qinitid;
	priv->shost = shost;
	priv->int_type = INT_TYPE;					

	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
		goto free_scsi_host;

	sprintf(priv->qinfo,
		"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
		qltyp, qbase, qlirq, QL_TURBO_PDMA);

	if (scsi_add_host(shost, NULL))
		goto free_interrupt;

	scsi_scan_host(shost);

	return shost;

free_interrupt:
	free_irq(qlirq, shost);

free_scsi_host:
	scsi_host_put(shost);
	
err:
	return NULL;
}
static int qlogic_probe(struct pcmcia_device *link)
{
	scsi_info_t *info;

	dev_dbg(&link->dev, "qlogic_attach()\n");

	/* Create new SCSI device */
	info = kzalloc(sizeof(*info), GFP_KERNEL);
	if (!info)
		return -ENOMEM;
	info->p_dev = link;
	link->priv = info;
	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
	link->config_regs = PRESENT_OPTION;

	return qlogic_config(link);
}				/* qlogic_attach */

/*====================================================================*/

static void qlogic_detach(struct pcmcia_device *link)
{
	dev_dbg(&link->dev, "qlogic_detach\n");

	qlogic_release(link);
	kfree(link->priv);

}				/* qlogic_detach */

/*====================================================================*/

static int qlogic_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
	p_dev->io_lines = 10;
	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;

	if (p_dev->resource[0]->start == 0)
		return -ENODEV;

	return pcmcia_request_io(p_dev);
}

static int qlogic_config(struct pcmcia_device * link)
{
	scsi_info_t *info = link->priv;
	int ret;
	struct Scsi_Host *host;

	dev_dbg(&link->dev, "qlogic_config\n");

	ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
	if (ret)
		goto failed;

	if (!link->irq)
		goto failed;

	ret = pcmcia_enable_device(link);
	if (ret)
		goto failed;

	if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
		/* set ATAcmd */
		outb(0xb4, link->resource[0]->start + 0xd);
		outb(0x24, link->resource[0]->start + 0x9);
		outb(0x04, link->resource[0]->start + 0xd);
	}

	/* The KXL-810AN has a bigger IO port window */
	if (resource_size(link->resource[0]) == 32)
		host = qlogic_detect(&qlogicfas_driver_template, link,
			link->resource[0]->start + 16, link->irq);
	else
		host = qlogic_detect(&qlogicfas_driver_template, link,
			link->resource[0]->start, link->irq);
	
	if (!host) {
		printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
		goto failed;
	}

	info->host = host;

	return 0;

failed:
	pcmcia_disable_device(link);
	return -ENODEV;
}				/* qlogic_config */

/*====================================================================*/

static void qlogic_release(struct pcmcia_device *link)
{
	scsi_info_t *info = link->priv;

	dev_dbg(&link->dev, "qlogic_release\n");

	scsi_remove_host(info->host);

	free_irq(link->irq, info->host);
	pcmcia_disable_device(link);

	scsi_host_put(info->host);
}

/*====================================================================*/

static int qlogic_resume(struct pcmcia_device *link)
{
	scsi_info_t *info = link->priv;

	pcmcia_enable_device(link);
	if ((info->manf_id == MANFID_MACNICA) ||
	    (info->manf_id == MANFID_PIONEER) ||
	    (info->manf_id == 0x0098)) {
		outb(0x80, link->resource[0]->start + 0xd);
		outb(0x24, link->resource[0]->start + 0x9);
		outb(0x04, link->resource[0]->start + 0xd);
	}
	/* Ugggglllyyyy!!! */
	qlogicfas408_bus_reset(NULL);

	return 0;
}

static struct pcmcia_device_id qlogic_ids[] = {
	PCMCIA_DEVICE_PROD_ID12("EIger Labs", "PCMCIA-to-SCSI Adapter", 0x88395fa7, 0x33b7a5e6),
	PCMCIA_DEVICE_PROD_ID12("EPSON", "SCSI-2 PC Card SC200", 0xd361772f, 0x299d1751),
	PCMCIA_DEVICE_PROD_ID12("MACNICA", "MIRACLE SCSI-II mPS110", 0x20841b68, 0xab3c3b6d),
	PCMCIA_DEVICE_PROD_ID12("MIDORI ELECTRONICS ", "CN-SC43", 0x6534382a, 0xd67eee79),
	PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J03R", 0x18df0ba0, 0x24662e8a),
	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC003", 0x82375a27, 0xf68e5bf7),
	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC004", 0x82375a27, 0x68eace54),
	PCMCIA_DEVICE_PROD_ID12("KME", "KXLC101", 0x3faee676, 0x194250ec),
	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05", 0xd77b2930, 0xa85b2735),
	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05 rev 1.10", 0xd77b2930, 0x70f8b5f8),
	PCMCIA_DEVICE_PROD_ID123("KME", "KXLC002", "00", 0x3faee676, 0x81896b61, 0xf99f065f),
	PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "SCSI2 CARD 37", 0x85c10e17, 0x1a2640c1),
	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200A PC CARD SCSI", 0xb4585a1a, 0xa6f06ebe),
	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200B PC CARD SCSI-10", 0xb4585a1a, 0x0a88dea0),
	/* these conflict with other cards! */
	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, qlogic_ids);

static struct pcmcia_driver qlogic_cs_driver = {
	.owner		= THIS_MODULE,
	.name		= "qlogic_cs",
	.probe		= qlogic_probe,
	.remove		= qlogic_detach,
	.id_table       = qlogic_ids,
	.resume		= qlogic_resume,
};

static int __init init_qlogic_cs(void)
{
	return pcmcia_register_driver(&qlogic_cs_driver);
}

static void __exit exit_qlogic_cs(void)
{
	pcmcia_unregister_driver(&qlogic_cs_driver);
}

MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
MODULE_LICENSE("GPL");
module_init(init_qlogic_cs);
module_exit(exit_qlogic_cs);
Commit	Line	Data
1da177e4 LT	1	/*======================================================================
	2
	3	A driver for the Qlogic SCSI card
	4
	5	qlogic_cs.c 1.79 2000/06/12 21:27:26
	6
	7	The contents of this file are subject to the Mozilla Public
	8	License Version 1.1 (the "License"); you may not use this file
	9	except in compliance with the License. You may obtain a copy of
	10	the License at http://www.mozilla.org/MPL/
	11
	12	Software distributed under the License is distributed on an "AS
	13	IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
	14	implied. See the License for the specific language governing
	15	rights and limitations under the License.
	16
	17	The initial developer of the original code is David A. Hinds
	18	<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
	19	are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
	20
	21	Alternatively, the contents of this file may be used under the
	22	terms of the GNU General Public License version 2 (the "GPL"), in which
	23	case the provisions of the GPL are applicable instead of the
	24	above. If you wish to allow the use of your version of this file
	25	only under the terms of the GPL and not to allow others to use
	26	your version of this file under the MPL, indicate your decision
	27	by deleting the provisions above and replace them with the notice
	28	and other provisions required by the GPL. If you do not delete
	29	the provisions above, a recipient may use your version of this
	30	file under either the MPL or the GPL.
	31
	32	======================================================================*/
	33
	34	#include <linux/module.h>
	35	#include <linux/init.h>
	36	#include <linux/kernel.h>
1da177e4 LT	37	#include <linux/slab.h>
	38	#include <linux/string.h>
	39	#include <linux/ioport.h>
	40	#include <asm/io.h>
	41	#include <scsi/scsi.h>
	42	#include <linux/major.h>
	43	#include <linux/blkdev.h>
	44	#include <scsi/scsi_ioctl.h>
	45	#include <linux/interrupt.h>
	46
	47	#include "scsi.h"
	48	#include <scsi/scsi_host.h>
	49	#include "../qlogicfas408.h"
	50
1da177e4 LT	51	#include <pcmcia/cistpl.h>
	52	#include <pcmcia/ds.h>
	53	#include <pcmcia/ciscode.h>
	54
	55	/* Set the following to 2 to use normal interrupt (active high/totempole-
	56	* tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
	57	* drain
	58	*/
	59	#define INT_TYPE 0
	60
	61	static char qlogic_name[] = "qlogic_cs";
	62
d0be4a7d	63	static struct scsi_host_template qlogicfas_driver_template = {
1da177e4 LT	64	.module = THIS_MODULE,
	65	.name = qlogic_name,
	66	.proc_name = qlogic_name,
	67	.info = qlogicfas408_info,
	68	.queuecommand = qlogicfas408_queuecommand,
	69	.eh_abort_handler = qlogicfas408_abort,
	70	.eh_bus_reset_handler = qlogicfas408_bus_reset,
1da177e4 LT	71	.bios_param = qlogicfas408_biosparam,
	72	.can_queue = 1,
	73	.this_id = -1,
	74	.sg_tablesize = SG_ALL,
	75	.cmd_per_lun = 1,
	76	.use_clustering = DISABLE_CLUSTERING,
	77	};
	78
	79	/====================================================================/
	80
	81	typedef struct scsi_info_t {
fd238232	82	struct pcmcia_device *p_dev;
1da177e4 LT	83	struct Scsi_Host *host;
	84	unsigned short manf_id;
	85	} scsi_info_t;
	86
fba395ee	87	static void qlogic_release(struct pcmcia_device *link);
cc3b4866	88	static void qlogic_detach(struct pcmcia_device *p_dev);
15b99ac1	89	static int qlogic_config(struct pcmcia_device * link);
1da177e4	90
d0be4a7d	91	static struct Scsi_Host qlogic_detect(struct scsi_host_template host,
fba395ee	92	struct pcmcia_device *link, int qbase, int qlirq)
1da177e4 LT	93	{
	94	int qltyp; /* type of chip */
	95	int qinitid;
	96	struct Scsi_Host shost; / registered host structure */
	97	struct qlogicfas408_priv *priv;
	98
	99	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
	100	qinitid = host->this_id;
	101	if (qinitid < 0)
	102	qinitid = 7; /* if no ID, use 7 */
	103
	104	qlogicfas408_setup(qbase, qinitid, INT_TYPE);
	105
	106	host->name = qlogic_name;
	107	shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
	108	if (!shost)
	109	goto err;
	110	shost->io_port = qbase;
	111	shost->n_io_port = 16;
	112	shost->dma_channel = -1;
	113	if (qlirq != -1)
	114	shost->irq = qlirq;
	115
	116	priv = get_priv_by_host(shost);
	117	priv->qlirq = qlirq;
	118	priv->qbase = qbase;
	119	priv->qinitid = qinitid;
	120	priv->shost = shost;
	121	priv->int_type = INT_TYPE;
	122
	123	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
	124	goto free_scsi_host;
	125
	126	sprintf(priv->qinfo,
	127	"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
	128	qltyp, qbase, qlirq, QL_TURBO_PDMA);
	129
	130	if (scsi_add_host(shost, NULL))
	131	goto free_interrupt;
	132
	133	scsi_scan_host(shost);
	134
	135	return shost;
	136
	137	free_interrupt:
	138	free_irq(qlirq, shost);
	139
	140	free_scsi_host:
	141	scsi_host_put(shost);
	142
	143	err:
	144	return NULL;
	145	}
15b99ac1	146	static int qlogic_probe(struct pcmcia_device *link)
1da177e4 LT	147	{
1da177e4 LT	148	scsi_info_t *info;
1da177e4	149
3e716617	150	dev_dbg(&link->dev, "qlogic_attach()\n");
1da177e4 LT	151
1da177e4 LT	152	/* Create new SCSI device */
dd00cc48	153	info = kzalloc(sizeof(*info), GFP_KERNEL);
1da177e4	154	if (!info)
f8cfa618	155	return -ENOMEM;
fba395ee	156	info->p_dev = link;
1da177e4	157	link->priv = info;
00990e7c	158	link->config_flags \|= CONF_ENABLE_IRQ \| CONF_AUTO_SET_IO;
7feabb64	159	link->config_regs = PRESENT_OPTION;
1da177e4	160
15b99ac1	161	return qlogic_config(link);
1da177e4 LT	162	} /* qlogic_attach */
	163
	164	/====================================================================/
	165
fba395ee	166	static void qlogic_detach(struct pcmcia_device *link)
1da177e4	167	{
3e716617	168	dev_dbg(&link->dev, "qlogic_detach\n");
1da177e4	169
e2d40963	170	qlogic_release(link);
1da177e4 LT	171	kfree(link->priv);
	172
	173	} /* qlogic_detach */
	174
	175	/====================================================================/
	176
00990e7c	177	static int qlogic_config_check(struct pcmcia_device p_dev, void priv_data)
0e6f9d27	178	{
90abdc3b	179	p_dev->io_lines = 10;
00990e7c DB	180	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
00990e7c DB	181	p_dev->resource[0]->flags \|= IO_DATA_PATH_WIDTH_AUTO;
0e6f9d27	182
90abdc3b	183	if (p_dev->resource[0]->start == 0)
0e6f9d27 DB	184	return -ENODEV;
0e6f9d27 DB	185
90abdc3b	186	return pcmcia_request_io(p_dev);
0e6f9d27 DB	187	}
0e6f9d27 DB	188
15b99ac1	189	static int qlogic_config(struct pcmcia_device * link)
1da177e4	190	{
1da177e4	191	scsi_info_t *info = link->priv;
3e716617	192	int ret;
1da177e4 LT	193	struct Scsi_Host *host;
1da177e4 LT	194
3e716617	195	dev_dbg(&link->dev, "qlogic_config\n");
1da177e4	196
3e716617 DB	197	ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
	198	if (ret)
	199	goto failed;
	200
eb14120f	201	if (!link->irq)
0e6f9d27	202	goto failed;
1da177e4	203
1ac71e5a	204	ret = pcmcia_enable_device(link);
3e716617 DB	205	if (ret)
3e716617 DB	206	goto failed;
1da177e4 LT	207
	208	if ((info->manf_id == MANFID_MACNICA) \|\| (info->manf_id == MANFID_PIONEER) \|\| (info->manf_id == 0x0098)) {
	209	/* set ATAcmd */
9a017a91 DB	210	outb(0xb4, link->resource[0]->start + 0xd);
	211	outb(0x24, link->resource[0]->start + 0x9);
	212	outb(0x04, link->resource[0]->start + 0xd);
1da177e4 LT	213	}
	214
	215	/* The KXL-810AN has a bigger IO port window */
9a017a91	216	if (resource_size(link->resource[0]) == 32)
1da177e4	217	host = qlogic_detect(&qlogicfas_driver_template, link,
9a017a91	218	link->resource[0]->start + 16, link->irq);
1da177e4 LT	219	else
1da177e4 LT	220	host = qlogic_detect(&qlogicfas_driver_template, link,
9a017a91	221	link->resource[0]->start, link->irq);
1da177e4 LT	222
	223	if (!host) {
	224	printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
3e716617	225	goto failed;
1da177e4 LT	226	}
1da177e4 LT	227
1da177e4 LT	228	info->host = host;
1da177e4 LT	229
15b99ac1	230	return 0;
1da177e4	231
0e6f9d27	232	failed:
3e716617	233	pcmcia_disable_device(link);
15b99ac1	234	return -ENODEV;
1da177e4 LT	235	} /* qlogic_config */
	236
	237	/====================================================================/
	238
fba395ee	239	static void qlogic_release(struct pcmcia_device *link)
1da177e4 LT	240	{
	241	scsi_info_t *info = link->priv;
	242
3e716617	243	dev_dbg(&link->dev, "qlogic_release\n");
1da177e4 LT	244
1da177e4 LT	245	scsi_remove_host(info->host);
1da177e4	246
eb14120f	247	free_irq(link->irq, info->host);
fba395ee	248	pcmcia_disable_device(link);
1da177e4 LT	249
1da177e4 LT	250	scsi_host_put(info->host);
1da177e4 LT	251	}
	252
	253	/====================================================================/
	254
fba395ee	255	static int qlogic_resume(struct pcmcia_device *link)
98e4c28b	256	{
e2d40963 DB	257	scsi_info_t *info = link->priv;
e2d40963 DB	258
1ac71e5a	259	pcmcia_enable_device(link);
e2d40963 DB	260	if ((info->manf_id == MANFID_MACNICA) \|\|
	261	(info->manf_id == MANFID_PIONEER) \|\|
	262	(info->manf_id == 0x0098)) {
9a017a91 DB	263	outb(0x80, link->resource[0]->start + 0xd);
	264	outb(0x24, link->resource[0]->start + 0x9);
	265	outb(0x04, link->resource[0]->start + 0xd);
98e4c28b	266	}
e2d40963 DB	267	/* Ugggglllyyyy!!! */
e2d40963 DB	268	qlogicfas408_bus_reset(NULL);
98e4c28b DB	269
	270	return 0;
	271	}
	272
7a5a6eeb DB	273	static struct pcmcia_device_id qlogic_ids[] = {
	274	PCMCIA_DEVICE_PROD_ID12("EIger Labs", "PCMCIA-to-SCSI Adapter", 0x88395fa7, 0x33b7a5e6),
	275	PCMCIA_DEVICE_PROD_ID12("EPSON", "SCSI-2 PC Card SC200", 0xd361772f, 0x299d1751),
	276	PCMCIA_DEVICE_PROD_ID12("MACNICA", "MIRACLE SCSI-II mPS110", 0x20841b68, 0xab3c3b6d),
	277	PCMCIA_DEVICE_PROD_ID12("MIDORI ELECTRONICS ", "CN-SC43", 0x6534382a, 0xd67eee79),
	278	PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J03R", 0x18df0ba0, 0x24662e8a),
	279	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC003", 0x82375a27, 0xf68e5bf7),
	280	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC004", 0x82375a27, 0x68eace54),
	281	PCMCIA_DEVICE_PROD_ID12("KME", "KXLC101", 0x3faee676, 0x194250ec),
	282	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05", 0xd77b2930, 0xa85b2735),
	283	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05 rev 1.10", 0xd77b2930, 0x70f8b5f8),
	284	PCMCIA_DEVICE_PROD_ID123("KME", "KXLC002", "00", 0x3faee676, 0x81896b61, 0xf99f065f),
	285	PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "SCSI2 CARD 37", 0x85c10e17, 0x1a2640c1),
	286	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200A PC CARD SCSI", 0xb4585a1a, 0xa6f06ebe),
	287	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200B PC CARD SCSI-10", 0xb4585a1a, 0x0a88dea0),
	288	/* these conflict with other cards! */
	289	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	290	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	291	PCMCIA_DEVICE_NULL,
	292	};
	293	MODULE_DEVICE_TABLE(pcmcia, qlogic_ids);
1da177e4 LT	294
	295	static struct pcmcia_driver qlogic_cs_driver = {
	296	.owner = THIS_MODULE,
1da177e4	297	.name = "qlogic_cs",
15b99ac1	298	.probe = qlogic_probe,
cc3b4866	299	.remove = qlogic_detach,
7a5a6eeb	300	.id_table = qlogic_ids,
98e4c28b	301	.resume = qlogic_resume,
1da177e4 LT	302	};
	303
	304	static int __init init_qlogic_cs(void)
	305	{
	306	return pcmcia_register_driver(&qlogic_cs_driver);
	307	}
	308
	309	static void __exit exit_qlogic_cs(void)
	310	{
	311	pcmcia_unregister_driver(&qlogic_cs_driver);
1da177e4 LT	312	}
	313
	314	MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
	315	MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
	316	MODULE_LICENSE("GPL");
	317	module_init(init_qlogic_cs);
	318	module_exit(exit_qlogic_cs);