[deliverable/linux.git] / drivers / scsi / pcmcia / qlogic_stub.c

/*======================================================================

    A driver for the Qlogic SCSI card

    qlogic_cs.c 1.79 2000/06/12 21:27:26

    The contents of this file are subject to the Mozilla Public
    License Version 1.1 (the "License"); you may not use this file
    except in compliance with the License. You may obtain a copy of
    the License at http://www.mozilla.org/MPL/

    Software distributed under the License is distributed on an "AS
    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
    implied. See the License for the specific language governing
    rights and limitations under the License.

    The initial developer of the original code is David A. Hinds
    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.

    Alternatively, the contents of this file may be used under the
    terms of the GNU General Public License version 2 (the "GPL"), in which
    case the provisions of the GPL are applicable instead of the
    above.  If you wish to allow the use of your version of this file
    only under the terms of the GPL and not to allow others to use
    your version of this file under the MPL, indicate your decision
    by deleting the provisions above and replace them with the notice
    and other provisions required by the GPL.  If you do not delete
    the provisions above, a recipient may use your version of this
    file under either the MPL or the GPL.
    
======================================================================*/

#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <scsi/scsi.h>
#include <linux/major.h>
#include <linux/blkdev.h>
#include <scsi/scsi_ioctl.h>
#include <linux/interrupt.h>

#include "scsi.h"
#include <scsi/scsi_host.h>
#include "../qlogicfas408.h"

#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <pcmcia/ciscode.h>

/* Set the following to 2 to use normal interrupt (active high/totempole-
 * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
 * drain
 */
#define INT_TYPE	0

static char qlogic_name[] = "qlogic_cs";

static struct scsi_host_template qlogicfas_driver_template = {
	.module			= THIS_MODULE,
	.name			= qlogic_name,
	.proc_name		= qlogic_name,
	.info			= qlogicfas408_info,
	.queuecommand		= qlogicfas408_queuecommand,
	.eh_abort_handler	= qlogicfas408_abort,
	.eh_bus_reset_handler	= qlogicfas408_bus_reset,
	.bios_param		= qlogicfas408_biosparam,
	.can_queue		= 1,
	.this_id		= -1,
	.sg_tablesize		= SG_ALL,
	.cmd_per_lun		= 1,
	.use_clustering		= DISABLE_CLUSTERING,
};

/*====================================================================*/

typedef struct scsi_info_t {
	struct pcmcia_device	*p_dev;
	struct Scsi_Host *host;
	unsigned short manf_id;
} scsi_info_t;

static void qlogic_release(struct pcmcia_device *link);
static void qlogic_detach(struct pcmcia_device *p_dev);
static int qlogic_config(struct pcmcia_device * link);

static struct Scsi_Host *qlogic_detect(struct scsi_host_template *host,
				struct pcmcia_device *link, int qbase, int qlirq)
{
	int qltyp;		/* type of chip */
	int qinitid;
	struct Scsi_Host *shost;	/* registered host structure */
	struct qlogicfas408_priv *priv;

	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
	qinitid = host->this_id;
	if (qinitid < 0)
		qinitid = 7;	/* if no ID, use 7 */

	qlogicfas408_setup(qbase, qinitid, INT_TYPE);

	host->name = qlogic_name;
	shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
	if (!shost)
		goto err;
	shost->io_port = qbase;
	shost->n_io_port = 16;
	shost->dma_channel = -1;
	if (qlirq != -1)
		shost->irq = qlirq;

	priv = get_priv_by_host(shost);
	priv->qlirq = qlirq;
	priv->qbase = qbase;
	priv->qinitid = qinitid;
	priv->shost = shost;
	priv->int_type = INT_TYPE;					

	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
		goto free_scsi_host;

	sprintf(priv->qinfo,
		"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
		qltyp, qbase, qlirq, QL_TURBO_PDMA);

	if (scsi_add_host(shost, NULL))
		goto free_interrupt;

	scsi_scan_host(shost);

	return shost;

free_interrupt:
	free_irq(qlirq, shost);

free_scsi_host:
	scsi_host_put(shost);
	
err:
	return NULL;
}
static int qlogic_probe(struct pcmcia_device *link)
{
	scsi_info_t *info;

	dev_dbg(&link->dev, "qlogic_attach()\n");

	/* Create new SCSI device */
	info = kzalloc(sizeof(*info), GFP_KERNEL);
	if (!info)
		return -ENOMEM;
	info->p_dev = link;
	link->priv = info;
	link->resource[0]->end = 16;
	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
	link->conf.Attributes = CONF_ENABLE_IRQ;
	link->conf.Present = PRESENT_OPTION;

	return qlogic_config(link);
}				/* qlogic_attach */

/*====================================================================*/

static void qlogic_detach(struct pcmcia_device *link)
{
	dev_dbg(&link->dev, "qlogic_detach\n");

	qlogic_release(link);
	kfree(link->priv);

}				/* qlogic_detach */

/*====================================================================*/

static int qlogic_config_check(struct pcmcia_device *p_dev,
			       cistpl_cftable_entry_t *cfg,
			       cistpl_cftable_entry_t *dflt,
			       unsigned int vcc,
			       void *priv_data)
{
	p_dev->io_lines = 10;
	p_dev->resource[0]->start = cfg->io.win[0].base;
	p_dev->resource[0]->end = cfg->io.win[0].len;

	if (p_dev->resource[0]->start == 0)
		return -ENODEV;

	return pcmcia_request_io(p_dev);
}

static int qlogic_config(struct pcmcia_device * link)
{
	scsi_info_t *info = link->priv;
	int ret;
	struct Scsi_Host *host;

	dev_dbg(&link->dev, "qlogic_config\n");

	ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
	if (ret)
		goto failed;

	if (!link->irq)
		goto failed;

	ret = pcmcia_request_configuration(link, &link->conf);
	if (ret)
		goto failed;

	if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
		/* set ATAcmd */
		outb(0xb4, link->resource[0]->start + 0xd);
		outb(0x24, link->resource[0]->start + 0x9);
		outb(0x04, link->resource[0]->start + 0xd);
	}

	/* The KXL-810AN has a bigger IO port window */
	if (resource_size(link->resource[0]) == 32)
		host = qlogic_detect(&qlogicfas_driver_template, link,
			link->resource[0]->start + 16, link->irq);
	else
		host = qlogic_detect(&qlogicfas_driver_template, link,
			link->resource[0]->start, link->irq);
	
	if (!host) {
		printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
		goto failed;
	}

	info->host = host;

	return 0;

failed:
	pcmcia_disable_device(link);
	return -ENODEV;
}				/* qlogic_config */

/*====================================================================*/

static void qlogic_release(struct pcmcia_device *link)
{
	scsi_info_t *info = link->priv;

	dev_dbg(&link->dev, "qlogic_release\n");

	scsi_remove_host(info->host);

	free_irq(link->irq, info->host);
	pcmcia_disable_device(link);

	scsi_host_put(info->host);
}

/*====================================================================*/

static int qlogic_resume(struct pcmcia_device *link)
{
	scsi_info_t *info = link->priv;

	pcmcia_request_configuration(link, &link->conf);
	if ((info->manf_id == MANFID_MACNICA) ||
	    (info->manf_id == MANFID_PIONEER) ||
	    (info->manf_id == 0x0098)) {
		outb(0x80, link->resource[0]->start + 0xd);
		outb(0x24, link->resource[0]->start + 0x9);
		outb(0x04, link->resource[0]->start + 0xd);
	}
	/* Ugggglllyyyy!!! */
	qlogicfas408_bus_reset(NULL);

	return 0;
}

static struct pcmcia_device_id qlogic_ids[] = {
	PCMCIA_DEVICE_PROD_ID12("EIger Labs", "PCMCIA-to-SCSI Adapter", 0x88395fa7, 0x33b7a5e6),
	PCMCIA_DEVICE_PROD_ID12("EPSON", "SCSI-2 PC Card SC200", 0xd361772f, 0x299d1751),
	PCMCIA_DEVICE_PROD_ID12("MACNICA", "MIRACLE SCSI-II mPS110", 0x20841b68, 0xab3c3b6d),
	PCMCIA_DEVICE_PROD_ID12("MIDORI ELECTRONICS ", "CN-SC43", 0x6534382a, 0xd67eee79),
	PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J03R", 0x18df0ba0, 0x24662e8a),
	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC003", 0x82375a27, 0xf68e5bf7),
	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC004", 0x82375a27, 0x68eace54),
	PCMCIA_DEVICE_PROD_ID12("KME", "KXLC101", 0x3faee676, 0x194250ec),
	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05", 0xd77b2930, 0xa85b2735),
	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05 rev 1.10", 0xd77b2930, 0x70f8b5f8),
	PCMCIA_DEVICE_PROD_ID123("KME", "KXLC002", "00", 0x3faee676, 0x81896b61, 0xf99f065f),
	PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "SCSI2 CARD 37", 0x85c10e17, 0x1a2640c1),
	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200A PC CARD SCSI", 0xb4585a1a, 0xa6f06ebe),
	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200B PC CARD SCSI-10", 0xb4585a1a, 0x0a88dea0),
	/* these conflict with other cards! */
	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, qlogic_ids);

static struct pcmcia_driver qlogic_cs_driver = {
	.owner		= THIS_MODULE,
	.drv		= {
	.name		= "qlogic_cs",
	},
	.probe		= qlogic_probe,
	.remove		= qlogic_detach,
	.id_table       = qlogic_ids,
	.resume		= qlogic_resume,
};

static int __init init_qlogic_cs(void)
{
	return pcmcia_register_driver(&qlogic_cs_driver);
}

static void __exit exit_qlogic_cs(void)
{
	pcmcia_unregister_driver(&qlogic_cs_driver);
}

MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
MODULE_LICENSE("GPL");
module_init(init_qlogic_cs);
module_exit(exit_qlogic_cs);
Commit	Line	Data
1da177e4 LT	1	/*======================================================================
	2
	3	A driver for the Qlogic SCSI card
	4
	5	qlogic_cs.c 1.79 2000/06/12 21:27:26
	6
	7	The contents of this file are subject to the Mozilla Public
	8	License Version 1.1 (the "License"); you may not use this file
	9	except in compliance with the License. You may obtain a copy of
	10	the License at http://www.mozilla.org/MPL/
	11
	12	Software distributed under the License is distributed on an "AS
	13	IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
	14	implied. See the License for the specific language governing
	15	rights and limitations under the License.
	16
	17	The initial developer of the original code is David A. Hinds
	18	<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
	19	are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
	20
	21	Alternatively, the contents of this file may be used under the
	22	terms of the GNU General Public License version 2 (the "GPL"), in which
	23	case the provisions of the GPL are applicable instead of the
	24	above. If you wish to allow the use of your version of this file
	25	only under the terms of the GPL and not to allow others to use
	26	your version of this file under the MPL, indicate your decision
	27	by deleting the provisions above and replace them with the notice
	28	and other provisions required by the GPL. If you do not delete
	29	the provisions above, a recipient may use your version of this
	30	file under either the MPL or the GPL.
	31
	32	======================================================================*/
	33
	34	#include <linux/module.h>
	35	#include <linux/init.h>
	36	#include <linux/kernel.h>
1da177e4 LT	37	#include <linux/slab.h>
	38	#include <linux/string.h>
	39	#include <linux/ioport.h>
	40	#include <asm/io.h>
	41	#include <scsi/scsi.h>
	42	#include <linux/major.h>
	43	#include <linux/blkdev.h>
	44	#include <scsi/scsi_ioctl.h>
	45	#include <linux/interrupt.h>
	46
	47	#include "scsi.h"
	48	#include <scsi/scsi_host.h>
	49	#include "../qlogicfas408.h"
	50
1da177e4 LT	51	#include <pcmcia/cs.h>
	52	#include <pcmcia/cistpl.h>
	53	#include <pcmcia/ds.h>
	54	#include <pcmcia/ciscode.h>
	55
	56	/* Set the following to 2 to use normal interrupt (active high/totempole-
	57	* tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
	58	* drain
	59	*/
	60	#define INT_TYPE 0
	61
	62	static char qlogic_name[] = "qlogic_cs";
	63
d0be4a7d	64	static struct scsi_host_template qlogicfas_driver_template = {
1da177e4 LT	65	.module = THIS_MODULE,
	66	.name = qlogic_name,
	67	.proc_name = qlogic_name,
	68	.info = qlogicfas408_info,
	69	.queuecommand = qlogicfas408_queuecommand,
	70	.eh_abort_handler = qlogicfas408_abort,
	71	.eh_bus_reset_handler = qlogicfas408_bus_reset,
1da177e4 LT	72	.bios_param = qlogicfas408_biosparam,
	73	.can_queue = 1,
	74	.this_id = -1,
	75	.sg_tablesize = SG_ALL,
	76	.cmd_per_lun = 1,
	77	.use_clustering = DISABLE_CLUSTERING,
	78	};
	79
	80	/====================================================================/
	81
	82	typedef struct scsi_info_t {
fd238232	83	struct pcmcia_device *p_dev;
1da177e4 LT	84	struct Scsi_Host *host;
	85	unsigned short manf_id;
	86	} scsi_info_t;
	87
fba395ee	88	static void qlogic_release(struct pcmcia_device *link);
cc3b4866	89	static void qlogic_detach(struct pcmcia_device *p_dev);
15b99ac1	90	static int qlogic_config(struct pcmcia_device * link);
1da177e4	91
d0be4a7d	92	static struct Scsi_Host qlogic_detect(struct scsi_host_template host,
fba395ee	93	struct pcmcia_device *link, int qbase, int qlirq)
1da177e4 LT	94	{
	95	int qltyp; /* type of chip */
	96	int qinitid;
	97	struct Scsi_Host shost; / registered host structure */
	98	struct qlogicfas408_priv *priv;
	99
	100	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
	101	qinitid = host->this_id;
	102	if (qinitid < 0)
	103	qinitid = 7; /* if no ID, use 7 */
	104
	105	qlogicfas408_setup(qbase, qinitid, INT_TYPE);
	106
	107	host->name = qlogic_name;
	108	shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
	109	if (!shost)
	110	goto err;
	111	shost->io_port = qbase;
	112	shost->n_io_port = 16;
	113	shost->dma_channel = -1;
	114	if (qlirq != -1)
	115	shost->irq = qlirq;
	116
	117	priv = get_priv_by_host(shost);
	118	priv->qlirq = qlirq;
	119	priv->qbase = qbase;
	120	priv->qinitid = qinitid;
	121	priv->shost = shost;
	122	priv->int_type = INT_TYPE;
	123
	124	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
	125	goto free_scsi_host;
	126
	127	sprintf(priv->qinfo,
	128	"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
	129	qltyp, qbase, qlirq, QL_TURBO_PDMA);
	130
	131	if (scsi_add_host(shost, NULL))
	132	goto free_interrupt;
	133
	134	scsi_scan_host(shost);
	135
	136	return shost;
	137
	138	free_interrupt:
	139	free_irq(qlirq, shost);
	140
	141	free_scsi_host:
	142	scsi_host_put(shost);
	143
	144	err:
	145	return NULL;
	146	}
15b99ac1	147	static int qlogic_probe(struct pcmcia_device *link)
1da177e4 LT	148	{
1da177e4 LT	149	scsi_info_t *info;
1da177e4	150
3e716617	151	dev_dbg(&link->dev, "qlogic_attach()\n");
1da177e4 LT	152
1da177e4 LT	153	/* Create new SCSI device */
dd00cc48	154	info = kzalloc(sizeof(*info), GFP_KERNEL);
1da177e4	155	if (!info)
f8cfa618	156	return -ENOMEM;
fba395ee	157	info->p_dev = link;
1da177e4	158	link->priv = info;
90abdc3b DB	159	link->resource[0]->end = 16;
90abdc3b DB	160	link->resource[0]->flags \|= IO_DATA_PATH_WIDTH_AUTO;
1da177e4	161	link->conf.Attributes = CONF_ENABLE_IRQ;
1da177e4 LT	162	link->conf.Present = PRESENT_OPTION;
1da177e4 LT	163
15b99ac1	164	return qlogic_config(link);
1da177e4 LT	165	} /* qlogic_attach */
	166
	167	/====================================================================/
	168
fba395ee	169	static void qlogic_detach(struct pcmcia_device *link)
1da177e4	170	{
3e716617	171	dev_dbg(&link->dev, "qlogic_detach\n");
1da177e4	172
e2d40963	173	qlogic_release(link);
1da177e4 LT	174	kfree(link->priv);
	175
	176	} /* qlogic_detach */
	177
	178	/====================================================================/
	179
0e6f9d27	180	static int qlogic_config_check(struct pcmcia_device *p_dev,
8e2fc39d DB	181	cistpl_cftable_entry_t *cfg,
8e2fc39d DB	182	cistpl_cftable_entry_t *dflt,
ad913c11	183	unsigned int vcc,
8e2fc39d	184	void *priv_data)
0e6f9d27	185	{
90abdc3b DB	186	p_dev->io_lines = 10;
	187	p_dev->resource[0]->start = cfg->io.win[0].base;
	188	p_dev->resource[0]->end = cfg->io.win[0].len;
0e6f9d27	189
90abdc3b	190	if (p_dev->resource[0]->start == 0)
0e6f9d27 DB	191	return -ENODEV;
0e6f9d27 DB	192
90abdc3b	193	return pcmcia_request_io(p_dev);
0e6f9d27 DB	194	}
0e6f9d27 DB	195
15b99ac1	196	static int qlogic_config(struct pcmcia_device * link)
1da177e4	197	{
1da177e4	198	scsi_info_t *info = link->priv;
3e716617	199	int ret;
1da177e4 LT	200	struct Scsi_Host *host;
1da177e4 LT	201
3e716617	202	dev_dbg(&link->dev, "qlogic_config\n");
1da177e4	203
3e716617 DB	204	ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
	205	if (ret)
	206	goto failed;
	207
eb14120f	208	if (!link->irq)
0e6f9d27	209	goto failed;
1da177e4	210
3e716617 DB	211	ret = pcmcia_request_configuration(link, &link->conf);
	212	if (ret)
	213	goto failed;
1da177e4 LT	214
	215	if ((info->manf_id == MANFID_MACNICA) \|\| (info->manf_id == MANFID_PIONEER) \|\| (info->manf_id == 0x0098)) {
	216	/* set ATAcmd */
9a017a91 DB	217	outb(0xb4, link->resource[0]->start + 0xd);
	218	outb(0x24, link->resource[0]->start + 0x9);
	219	outb(0x04, link->resource[0]->start + 0xd);
1da177e4 LT	220	}
	221
	222	/* The KXL-810AN has a bigger IO port window */
9a017a91	223	if (resource_size(link->resource[0]) == 32)
1da177e4	224	host = qlogic_detect(&qlogicfas_driver_template, link,
9a017a91	225	link->resource[0]->start + 16, link->irq);
1da177e4 LT	226	else
1da177e4 LT	227	host = qlogic_detect(&qlogicfas_driver_template, link,
9a017a91	228	link->resource[0]->start, link->irq);
1da177e4 LT	229
	230	if (!host) {
	231	printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
3e716617	232	goto failed;
1da177e4 LT	233	}
1da177e4 LT	234
1da177e4 LT	235	info->host = host;
1da177e4 LT	236
15b99ac1	237	return 0;
1da177e4	238
0e6f9d27	239	failed:
3e716617	240	pcmcia_disable_device(link);
15b99ac1	241	return -ENODEV;
1da177e4 LT	242	} /* qlogic_config */
	243
	244	/====================================================================/
	245
fba395ee	246	static void qlogic_release(struct pcmcia_device *link)
1da177e4 LT	247	{
	248	scsi_info_t *info = link->priv;
	249
3e716617	250	dev_dbg(&link->dev, "qlogic_release\n");
1da177e4 LT	251
1da177e4 LT	252	scsi_remove_host(info->host);
1da177e4	253
eb14120f	254	free_irq(link->irq, info->host);
fba395ee	255	pcmcia_disable_device(link);
1da177e4 LT	256
1da177e4 LT	257	scsi_host_put(info->host);
1da177e4 LT	258	}
	259
	260	/====================================================================/
	261
fba395ee	262	static int qlogic_resume(struct pcmcia_device *link)
98e4c28b	263	{
e2d40963 DB	264	scsi_info_t *info = link->priv;
	265
	266	pcmcia_request_configuration(link, &link->conf);
	267	if ((info->manf_id == MANFID_MACNICA) \|\|
	268	(info->manf_id == MANFID_PIONEER) \|\|
	269	(info->manf_id == 0x0098)) {
9a017a91 DB	270	outb(0x80, link->resource[0]->start + 0xd);
	271	outb(0x24, link->resource[0]->start + 0x9);
	272	outb(0x04, link->resource[0]->start + 0xd);
98e4c28b	273	}
e2d40963 DB	274	/* Ugggglllyyyy!!! */
e2d40963 DB	275	qlogicfas408_bus_reset(NULL);
98e4c28b DB	276
	277	return 0;
	278	}
	279
7a5a6eeb DB	280	static struct pcmcia_device_id qlogic_ids[] = {
	281	PCMCIA_DEVICE_PROD_ID12("EIger Labs", "PCMCIA-to-SCSI Adapter", 0x88395fa7, 0x33b7a5e6),
	282	PCMCIA_DEVICE_PROD_ID12("EPSON", "SCSI-2 PC Card SC200", 0xd361772f, 0x299d1751),
	283	PCMCIA_DEVICE_PROD_ID12("MACNICA", "MIRACLE SCSI-II mPS110", 0x20841b68, 0xab3c3b6d),
	284	PCMCIA_DEVICE_PROD_ID12("MIDORI ELECTRONICS ", "CN-SC43", 0x6534382a, 0xd67eee79),
	285	PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J03R", 0x18df0ba0, 0x24662e8a),
	286	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC003", 0x82375a27, 0xf68e5bf7),
	287	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC004", 0x82375a27, 0x68eace54),
	288	PCMCIA_DEVICE_PROD_ID12("KME", "KXLC101", 0x3faee676, 0x194250ec),
	289	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05", 0xd77b2930, 0xa85b2735),
	290	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05 rev 1.10", 0xd77b2930, 0x70f8b5f8),
	291	PCMCIA_DEVICE_PROD_ID123("KME", "KXLC002", "00", 0x3faee676, 0x81896b61, 0xf99f065f),
	292	PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "SCSI2 CARD 37", 0x85c10e17, 0x1a2640c1),
	293	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200A PC CARD SCSI", 0xb4585a1a, 0xa6f06ebe),
	294	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200B PC CARD SCSI-10", 0xb4585a1a, 0x0a88dea0),
	295	/* these conflict with other cards! */
	296	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	297	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	298	PCMCIA_DEVICE_NULL,
	299	};
	300	MODULE_DEVICE_TABLE(pcmcia, qlogic_ids);
1da177e4 LT	301
	302	static struct pcmcia_driver qlogic_cs_driver = {
	303	.owner = THIS_MODULE,
	304	.drv = {
	305	.name = "qlogic_cs",
	306	},
15b99ac1	307	.probe = qlogic_probe,
cc3b4866	308	.remove = qlogic_detach,
7a5a6eeb	309	.id_table = qlogic_ids,
98e4c28b	310	.resume = qlogic_resume,
1da177e4 LT	311	};
	312
	313	static int __init init_qlogic_cs(void)
	314	{
	315	return pcmcia_register_driver(&qlogic_cs_driver);
	316	}
	317
	318	static void __exit exit_qlogic_cs(void)
	319	{
	320	pcmcia_unregister_driver(&qlogic_cs_driver);
1da177e4 LT	321	}
	322
	323	MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
	324	MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
	325	MODULE_LICENSE("GPL");
	326	module_init(init_qlogic_cs);
	327	module_exit(exit_qlogic_cs);