[deliverable/linux.git] / drivers / scsi / pcmcia / qlogic_stub.c

/*======================================================================

    A driver for the Qlogic SCSI card

    qlogic_cs.c 1.79 2000/06/12 21:27:26

    The contents of this file are subject to the Mozilla Public
    License Version 1.1 (the "License"); you may not use this file
    except in compliance with the License. You may obtain a copy of
    the License at http://www.mozilla.org/MPL/

    Software distributed under the License is distributed on an "AS
    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
    implied. See the License for the specific language governing
    rights and limitations under the License.

    The initial developer of the original code is David A. Hinds
    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.

    Alternatively, the contents of this file may be used under the
    terms of the GNU General Public License version 2 (the "GPL"), in which
    case the provisions of the GPL are applicable instead of the
    above.  If you wish to allow the use of your version of this file
    only under the terms of the GPL and not to allow others to use
    your version of this file under the MPL, indicate your decision
    by deleting the provisions above and replace them with the notice
    and other provisions required by the GPL.  If you do not delete
    the provisions above, a recipient may use your version of this
    file under either the MPL or the GPL.
    
======================================================================*/

#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <scsi/scsi.h>
#include <linux/major.h>
#include <linux/blkdev.h>
#include <scsi/scsi_ioctl.h>
#include <linux/interrupt.h>

#include "scsi.h"
#include <scsi/scsi_host.h>
#include "../qlogicfas408.h"

#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <pcmcia/ciscode.h>

/* Set the following to 2 to use normal interrupt (active high/totempole-
 * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
 * drain
 */
#define INT_TYPE	0

static char qlogic_name[] = "qlogic_cs";

static struct scsi_host_template qlogicfas_driver_template = {
	.module			= THIS_MODULE,
	.name			= qlogic_name,
	.proc_name		= qlogic_name,
	.info			= qlogicfas408_info,
	.queuecommand		= qlogicfas408_queuecommand,
	.eh_abort_handler	= qlogicfas408_abort,
	.eh_bus_reset_handler	= qlogicfas408_bus_reset,
	.bios_param		= qlogicfas408_biosparam,
	.can_queue		= 1,
	.this_id		= -1,
	.sg_tablesize		= SG_ALL,
	.cmd_per_lun		= 1,
	.use_clustering		= DISABLE_CLUSTERING,
};

/*====================================================================*/

typedef struct scsi_info_t {
	struct pcmcia_device	*p_dev;
	struct Scsi_Host *host;
	unsigned short manf_id;
} scsi_info_t;

static void qlogic_release(struct pcmcia_device *link);
static void qlogic_detach(struct pcmcia_device *p_dev);
static int qlogic_config(struct pcmcia_device * link);

static struct Scsi_Host *qlogic_detect(struct scsi_host_template *host,
				struct pcmcia_device *link, int qbase, int qlirq)
{
	int qltyp;		/* type of chip */
	int qinitid;
	struct Scsi_Host *shost;	/* registered host structure */
	struct qlogicfas408_priv *priv;

	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
	qinitid = host->this_id;
	if (qinitid < 0)
		qinitid = 7;	/* if no ID, use 7 */

	qlogicfas408_setup(qbase, qinitid, INT_TYPE);

	host->name = qlogic_name;
	shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
	if (!shost)
		goto err;
	shost->io_port = qbase;
	shost->n_io_port = 16;
	shost->dma_channel = -1;
	if (qlirq != -1)
		shost->irq = qlirq;

	priv = get_priv_by_host(shost);
	priv->qlirq = qlirq;
	priv->qbase = qbase;
	priv->qinitid = qinitid;
	priv->shost = shost;
	priv->int_type = INT_TYPE;					

	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
		goto free_scsi_host;

	sprintf(priv->qinfo,
		"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
		qltyp, qbase, qlirq, QL_TURBO_PDMA);

	if (scsi_add_host(shost, NULL))
		goto free_interrupt;

	scsi_scan_host(shost);

	return shost;

free_interrupt:
	free_irq(qlirq, shost);

free_scsi_host:
	scsi_host_put(shost);
	
err:
	return NULL;
}
static int qlogic_probe(struct pcmcia_device *link)
{
	scsi_info_t *info;

	dev_dbg(&link->dev, "qlogic_attach()\n");

	/* Create new SCSI device */
	info = kzalloc(sizeof(*info), GFP_KERNEL);
	if (!info)
		return -ENOMEM;
	info->p_dev = link;
	link->priv = info;
	link->resource[0]->end = 16;
	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
	link->conf.Attributes = CONF_ENABLE_IRQ;
	link->conf.IntType = INT_MEMORY_AND_IO;
	link->conf.Present = PRESENT_OPTION;

	return qlogic_config(link);
}				/* qlogic_attach */

/*====================================================================*/

static void qlogic_detach(struct pcmcia_device *link)
{
	dev_dbg(&link->dev, "qlogic_detach\n");

	qlogic_release(link);
	kfree(link->priv);

}				/* qlogic_detach */

/*====================================================================*/

static int qlogic_config_check(struct pcmcia_device *p_dev,
			       cistpl_cftable_entry_t *cfg,
			       cistpl_cftable_entry_t *dflt,
			       unsigned int vcc,
			       void *priv_data)
{
	p_dev->io_lines = 10;
	p_dev->resource[0]->start = cfg->io.win[0].base;
	p_dev->resource[0]->end = cfg->io.win[0].len;

	if (p_dev->resource[0]->start == 0)
		return -ENODEV;

	return pcmcia_request_io(p_dev);
}

static int qlogic_config(struct pcmcia_device * link)
{
	scsi_info_t *info = link->priv;
	int ret;
	struct Scsi_Host *host;

	dev_dbg(&link->dev, "qlogic_config\n");

	ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
	if (ret)
		goto failed;

	if (!link->irq)
		goto failed;

	ret = pcmcia_request_configuration(link, &link->conf);
	if (ret)
		goto failed;

	if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
		/* set ATAcmd */
		outb(0xb4, link->resource[0]->start + 0xd);
		outb(0x24, link->resource[0]->start + 0x9);
		outb(0x04, link->resource[0]->start + 0xd);
	}

	/* The KXL-810AN has a bigger IO port window */
	if (resource_size(link->resource[0]) == 32)
		host = qlogic_detect(&qlogicfas_driver_template, link,
			link->resource[0]->start + 16, link->irq);
	else
		host = qlogic_detect(&qlogicfas_driver_template, link,
			link->resource[0]->start, link->irq);
	
	if (!host) {
		printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
		goto failed;
	}

	info->host = host;

	return 0;

failed:
	pcmcia_disable_device(link);
	return -ENODEV;
}				/* qlogic_config */

/*====================================================================*/

static void qlogic_release(struct pcmcia_device *link)
{
	scsi_info_t *info = link->priv;

	dev_dbg(&link->dev, "qlogic_release\n");

	scsi_remove_host(info->host);

	free_irq(link->irq, info->host);
	pcmcia_disable_device(link);

	scsi_host_put(info->host);
}

/*====================================================================*/

static int qlogic_resume(struct pcmcia_device *link)
{
	scsi_info_t *info = link->priv;

	pcmcia_request_configuration(link, &link->conf);
	if ((info->manf_id == MANFID_MACNICA) ||
	    (info->manf_id == MANFID_PIONEER) ||
	    (info->manf_id == 0x0098)) {
		outb(0x80, link->resource[0]->start + 0xd);
		outb(0x24, link->resource[0]->start + 0x9);
		outb(0x04, link->resource[0]->start + 0xd);
	}
	/* Ugggglllyyyy!!! */
	qlogicfas408_bus_reset(NULL);

	return 0;
}

static struct pcmcia_device_id qlogic_ids[] = {
	PCMCIA_DEVICE_PROD_ID12("EIger Labs", "PCMCIA-to-SCSI Adapter", 0x88395fa7, 0x33b7a5e6),
	PCMCIA_DEVICE_PROD_ID12("EPSON", "SCSI-2 PC Card SC200", 0xd361772f, 0x299d1751),
	PCMCIA_DEVICE_PROD_ID12("MACNICA", "MIRACLE SCSI-II mPS110", 0x20841b68, 0xab3c3b6d),
	PCMCIA_DEVICE_PROD_ID12("MIDORI ELECTRONICS ", "CN-SC43", 0x6534382a, 0xd67eee79),
	PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J03R", 0x18df0ba0, 0x24662e8a),
	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC003", 0x82375a27, 0xf68e5bf7),
	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC004", 0x82375a27, 0x68eace54),
	PCMCIA_DEVICE_PROD_ID12("KME", "KXLC101", 0x3faee676, 0x194250ec),
	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05", 0xd77b2930, 0xa85b2735),
	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05 rev 1.10", 0xd77b2930, 0x70f8b5f8),
	PCMCIA_DEVICE_PROD_ID123("KME", "KXLC002", "00", 0x3faee676, 0x81896b61, 0xf99f065f),
	PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "SCSI2 CARD 37", 0x85c10e17, 0x1a2640c1),
	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200A PC CARD SCSI", 0xb4585a1a, 0xa6f06ebe),
	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200B PC CARD SCSI-10", 0xb4585a1a, 0x0a88dea0),
	/* these conflict with other cards! */
	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, qlogic_ids);

static struct pcmcia_driver qlogic_cs_driver = {
	.owner		= THIS_MODULE,
	.drv		= {
	.name		= "qlogic_cs",
	},
	.probe		= qlogic_probe,
	.remove		= qlogic_detach,
	.id_table       = qlogic_ids,
	.resume		= qlogic_resume,
};

static int __init init_qlogic_cs(void)
{
	return pcmcia_register_driver(&qlogic_cs_driver);
}

static void __exit exit_qlogic_cs(void)
{
	pcmcia_unregister_driver(&qlogic_cs_driver);
}

MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
MODULE_LICENSE("GPL");
module_init(init_qlogic_cs);
module_exit(exit_qlogic_cs);
Commit	Line	Data
1da177e4 LT	1	/*======================================================================
	2
	3	A driver for the Qlogic SCSI card
	4
	5	qlogic_cs.c 1.79 2000/06/12 21:27:26
	6
	7	The contents of this file are subject to the Mozilla Public
	8	License Version 1.1 (the "License"); you may not use this file
	9	except in compliance with the License. You may obtain a copy of
	10	the License at http://www.mozilla.org/MPL/
	11
	12	Software distributed under the License is distributed on an "AS
	13	IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
	14	implied. See the License for the specific language governing
	15	rights and limitations under the License.
	16
	17	The initial developer of the original code is David A. Hinds
	18	<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
	19	are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
	20
	21	Alternatively, the contents of this file may be used under the
	22	terms of the GNU General Public License version 2 (the "GPL"), in which
	23	case the provisions of the GPL are applicable instead of the
	24	above. If you wish to allow the use of your version of this file
	25	only under the terms of the GPL and not to allow others to use
	26	your version of this file under the MPL, indicate your decision
	27	by deleting the provisions above and replace them with the notice
	28	and other provisions required by the GPL. If you do not delete
	29	the provisions above, a recipient may use your version of this
	30	file under either the MPL or the GPL.
	31
	32	======================================================================*/
	33
	34	#include <linux/module.h>
	35	#include <linux/init.h>
	36	#include <linux/kernel.h>
1da177e4 LT	37	#include <linux/slab.h>
	38	#include <linux/string.h>
	39	#include <linux/ioport.h>
	40	#include <asm/io.h>
	41	#include <scsi/scsi.h>
	42	#include <linux/major.h>
	43	#include <linux/blkdev.h>
	44	#include <scsi/scsi_ioctl.h>
	45	#include <linux/interrupt.h>
	46
	47	#include "scsi.h"
	48	#include <scsi/scsi_host.h>
	49	#include "../qlogicfas408.h"
	50
1da177e4 LT	51	#include <pcmcia/cs.h>
	52	#include <pcmcia/cistpl.h>
	53	#include <pcmcia/ds.h>
	54	#include <pcmcia/ciscode.h>
	55
	56	/* Set the following to 2 to use normal interrupt (active high/totempole-
	57	* tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
	58	* drain
	59	*/
	60	#define INT_TYPE 0
	61
	62	static char qlogic_name[] = "qlogic_cs";
	63
d0be4a7d	64	static struct scsi_host_template qlogicfas_driver_template = {
1da177e4 LT	65	.module = THIS_MODULE,
	66	.name = qlogic_name,
	67	.proc_name = qlogic_name,
	68	.info = qlogicfas408_info,
	69	.queuecommand = qlogicfas408_queuecommand,
	70	.eh_abort_handler = qlogicfas408_abort,
	71	.eh_bus_reset_handler = qlogicfas408_bus_reset,
1da177e4 LT	72	.bios_param = qlogicfas408_biosparam,
	73	.can_queue = 1,
	74	.this_id = -1,
	75	.sg_tablesize = SG_ALL,
	76	.cmd_per_lun = 1,
	77	.use_clustering = DISABLE_CLUSTERING,
	78	};
	79
	80	/====================================================================/
	81
	82	typedef struct scsi_info_t {
fd238232	83	struct pcmcia_device *p_dev;
1da177e4 LT	84	struct Scsi_Host *host;
	85	unsigned short manf_id;
	86	} scsi_info_t;
	87
fba395ee	88	static void qlogic_release(struct pcmcia_device *link);
cc3b4866	89	static void qlogic_detach(struct pcmcia_device *p_dev);
15b99ac1	90	static int qlogic_config(struct pcmcia_device * link);
1da177e4	91
d0be4a7d	92	static struct Scsi_Host qlogic_detect(struct scsi_host_template host,
fba395ee	93	struct pcmcia_device *link, int qbase, int qlirq)
1da177e4 LT	94	{
	95	int qltyp; /* type of chip */
	96	int qinitid;
	97	struct Scsi_Host shost; / registered host structure */
	98	struct qlogicfas408_priv *priv;
	99
	100	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
	101	qinitid = host->this_id;
	102	if (qinitid < 0)
	103	qinitid = 7; /* if no ID, use 7 */
	104
	105	qlogicfas408_setup(qbase, qinitid, INT_TYPE);
	106
	107	host->name = qlogic_name;
	108	shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
	109	if (!shost)
	110	goto err;
	111	shost->io_port = qbase;
	112	shost->n_io_port = 16;
	113	shost->dma_channel = -1;
	114	if (qlirq != -1)
	115	shost->irq = qlirq;
	116
	117	priv = get_priv_by_host(shost);
	118	priv->qlirq = qlirq;
	119	priv->qbase = qbase;
	120	priv->qinitid = qinitid;
	121	priv->shost = shost;
	122	priv->int_type = INT_TYPE;
	123
	124	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
	125	goto free_scsi_host;
	126
	127	sprintf(priv->qinfo,
	128	"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
	129	qltyp, qbase, qlirq, QL_TURBO_PDMA);
	130
	131	if (scsi_add_host(shost, NULL))
	132	goto free_interrupt;
	133
	134	scsi_scan_host(shost);
	135
	136	return shost;
	137
	138	free_interrupt:
	139	free_irq(qlirq, shost);
	140
	141	free_scsi_host:
	142	scsi_host_put(shost);
	143
	144	err:
	145	return NULL;
	146	}
15b99ac1	147	static int qlogic_probe(struct pcmcia_device *link)
1da177e4 LT	148	{
1da177e4 LT	149	scsi_info_t *info;
1da177e4	150
3e716617	151	dev_dbg(&link->dev, "qlogic_attach()\n");
1da177e4 LT	152
1da177e4 LT	153	/* Create new SCSI device */
dd00cc48	154	info = kzalloc(sizeof(*info), GFP_KERNEL);
1da177e4	155	if (!info)
f8cfa618	156	return -ENOMEM;
fba395ee	157	info->p_dev = link;
1da177e4	158	link->priv = info;
90abdc3b DB	159	link->resource[0]->end = 16;
90abdc3b DB	160	link->resource[0]->flags \|= IO_DATA_PATH_WIDTH_AUTO;
1da177e4	161	link->conf.Attributes = CONF_ENABLE_IRQ;
1da177e4 LT	162	link->conf.IntType = INT_MEMORY_AND_IO;
	163	link->conf.Present = PRESENT_OPTION;
	164
15b99ac1	165	return qlogic_config(link);
1da177e4 LT	166	} /* qlogic_attach */
	167
	168	/====================================================================/
	169
fba395ee	170	static void qlogic_detach(struct pcmcia_device *link)
1da177e4	171	{
3e716617	172	dev_dbg(&link->dev, "qlogic_detach\n");
1da177e4	173
e2d40963	174	qlogic_release(link);
1da177e4 LT	175	kfree(link->priv);
	176
	177	} /* qlogic_detach */
	178
	179	/====================================================================/
	180
0e6f9d27	181	static int qlogic_config_check(struct pcmcia_device *p_dev,
8e2fc39d DB	182	cistpl_cftable_entry_t *cfg,
8e2fc39d DB	183	cistpl_cftable_entry_t *dflt,
ad913c11	184	unsigned int vcc,
8e2fc39d	185	void *priv_data)
0e6f9d27	186	{
90abdc3b DB	187	p_dev->io_lines = 10;
	188	p_dev->resource[0]->start = cfg->io.win[0].base;
	189	p_dev->resource[0]->end = cfg->io.win[0].len;
0e6f9d27	190
90abdc3b	191	if (p_dev->resource[0]->start == 0)
0e6f9d27 DB	192	return -ENODEV;
0e6f9d27 DB	193
90abdc3b	194	return pcmcia_request_io(p_dev);
0e6f9d27 DB	195	}
0e6f9d27 DB	196
15b99ac1	197	static int qlogic_config(struct pcmcia_device * link)
1da177e4	198	{
1da177e4	199	scsi_info_t *info = link->priv;
3e716617	200	int ret;
1da177e4 LT	201	struct Scsi_Host *host;
1da177e4 LT	202
3e716617	203	dev_dbg(&link->dev, "qlogic_config\n");
1da177e4	204
3e716617 DB	205	ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
	206	if (ret)
	207	goto failed;
	208
eb14120f	209	if (!link->irq)
0e6f9d27	210	goto failed;
1da177e4	211
3e716617 DB	212	ret = pcmcia_request_configuration(link, &link->conf);
	213	if (ret)
	214	goto failed;
1da177e4 LT	215
	216	if ((info->manf_id == MANFID_MACNICA) \|\| (info->manf_id == MANFID_PIONEER) \|\| (info->manf_id == 0x0098)) {
	217	/* set ATAcmd */
9a017a91 DB	218	outb(0xb4, link->resource[0]->start + 0xd);
	219	outb(0x24, link->resource[0]->start + 0x9);
	220	outb(0x04, link->resource[0]->start + 0xd);
1da177e4 LT	221	}
	222
	223	/* The KXL-810AN has a bigger IO port window */
9a017a91	224	if (resource_size(link->resource[0]) == 32)
1da177e4	225	host = qlogic_detect(&qlogicfas_driver_template, link,
9a017a91	226	link->resource[0]->start + 16, link->irq);
1da177e4 LT	227	else
1da177e4 LT	228	host = qlogic_detect(&qlogicfas_driver_template, link,
9a017a91	229	link->resource[0]->start, link->irq);
1da177e4 LT	230
	231	if (!host) {
	232	printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
3e716617	233	goto failed;
1da177e4 LT	234	}
1da177e4 LT	235
1da177e4 LT	236	info->host = host;
1da177e4 LT	237
15b99ac1	238	return 0;
1da177e4	239
0e6f9d27	240	failed:
3e716617	241	pcmcia_disable_device(link);
15b99ac1	242	return -ENODEV;
1da177e4 LT	243	} /* qlogic_config */
	244
	245	/====================================================================/
	246
fba395ee	247	static void qlogic_release(struct pcmcia_device *link)
1da177e4 LT	248	{
	249	scsi_info_t *info = link->priv;
	250
3e716617	251	dev_dbg(&link->dev, "qlogic_release\n");
1da177e4 LT	252
1da177e4 LT	253	scsi_remove_host(info->host);
1da177e4	254
eb14120f	255	free_irq(link->irq, info->host);
fba395ee	256	pcmcia_disable_device(link);
1da177e4 LT	257
1da177e4 LT	258	scsi_host_put(info->host);
1da177e4 LT	259	}
	260
	261	/====================================================================/
	262
fba395ee	263	static int qlogic_resume(struct pcmcia_device *link)
98e4c28b	264	{
e2d40963 DB	265	scsi_info_t *info = link->priv;
	266
	267	pcmcia_request_configuration(link, &link->conf);
	268	if ((info->manf_id == MANFID_MACNICA) \|\|
	269	(info->manf_id == MANFID_PIONEER) \|\|
	270	(info->manf_id == 0x0098)) {
9a017a91 DB	271	outb(0x80, link->resource[0]->start + 0xd);
	272	outb(0x24, link->resource[0]->start + 0x9);
	273	outb(0x04, link->resource[0]->start + 0xd);
98e4c28b	274	}
e2d40963 DB	275	/* Ugggglllyyyy!!! */
e2d40963 DB	276	qlogicfas408_bus_reset(NULL);
98e4c28b DB	277
	278	return 0;
	279	}
	280
7a5a6eeb DB	281	static struct pcmcia_device_id qlogic_ids[] = {
	282	PCMCIA_DEVICE_PROD_ID12("EIger Labs", "PCMCIA-to-SCSI Adapter", 0x88395fa7, 0x33b7a5e6),
	283	PCMCIA_DEVICE_PROD_ID12("EPSON", "SCSI-2 PC Card SC200", 0xd361772f, 0x299d1751),
	284	PCMCIA_DEVICE_PROD_ID12("MACNICA", "MIRACLE SCSI-II mPS110", 0x20841b68, 0xab3c3b6d),
	285	PCMCIA_DEVICE_PROD_ID12("MIDORI ELECTRONICS ", "CN-SC43", 0x6534382a, 0xd67eee79),
	286	PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J03R", 0x18df0ba0, 0x24662e8a),
	287	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC003", 0x82375a27, 0xf68e5bf7),
	288	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC004", 0x82375a27, 0x68eace54),
	289	PCMCIA_DEVICE_PROD_ID12("KME", "KXLC101", 0x3faee676, 0x194250ec),
	290	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05", 0xd77b2930, 0xa85b2735),
	291	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05 rev 1.10", 0xd77b2930, 0x70f8b5f8),
	292	PCMCIA_DEVICE_PROD_ID123("KME", "KXLC002", "00", 0x3faee676, 0x81896b61, 0xf99f065f),
	293	PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "SCSI2 CARD 37", 0x85c10e17, 0x1a2640c1),
	294	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200A PC CARD SCSI", 0xb4585a1a, 0xa6f06ebe),
	295	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200B PC CARD SCSI-10", 0xb4585a1a, 0x0a88dea0),
	296	/* these conflict with other cards! */
	297	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	298	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
	299	PCMCIA_DEVICE_NULL,
	300	};
	301	MODULE_DEVICE_TABLE(pcmcia, qlogic_ids);
1da177e4 LT	302
	303	static struct pcmcia_driver qlogic_cs_driver = {
	304	.owner = THIS_MODULE,
	305	.drv = {
	306	.name = "qlogic_cs",
	307	},
15b99ac1	308	.probe = qlogic_probe,
cc3b4866	309	.remove = qlogic_detach,
7a5a6eeb	310	.id_table = qlogic_ids,
98e4c28b	311	.resume = qlogic_resume,
1da177e4 LT	312	};
	313
	314	static int __init init_qlogic_cs(void)
	315	{
	316	return pcmcia_register_driver(&qlogic_cs_driver);
	317	}
	318
	319	static void __exit exit_qlogic_cs(void)
	320	{
	321	pcmcia_unregister_driver(&qlogic_cs_driver);
1da177e4 LT	322	}
	323
	324	MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
	325	MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
	326	MODULE_LICENSE("GPL");
	327	module_init(init_qlogic_cs);
	328	module_exit(exit_qlogic_cs);