Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
f30c2269 | 2 | * linux/drivers/serial/21285.c |
1da177e4 LT |
3 | * |
4 | * Driver for the serial port on the 21285 StrongArm-110 core logic chip. | |
5 | * | |
6 | * Based on drivers/char/serial.c | |
7 | * | |
8 | * $Id: 21285.c,v 1.37 2002/07/28 10:03:27 rmk Exp $ | |
9 | */ | |
1da177e4 LT |
10 | #include <linux/module.h> |
11 | #include <linux/tty.h> | |
12 | #include <linux/ioport.h> | |
13 | #include <linux/init.h> | |
14 | #include <linux/console.h> | |
15 | #include <linux/device.h> | |
16 | #include <linux/tty_flip.h> | |
17 | #include <linux/serial_core.h> | |
18 | #include <linux/serial.h> | |
19 | ||
20 | #include <asm/io.h> | |
21 | #include <asm/irq.h> | |
22 | #include <asm/mach-types.h> | |
23 | #include <asm/hardware/dec21285.h> | |
24 | #include <asm/hardware.h> | |
25 | ||
26 | #define BAUD_BASE (mem_fclk_21285/64) | |
27 | ||
28 | #define SERIAL_21285_NAME "ttyFB" | |
29 | #define SERIAL_21285_MAJOR 204 | |
30 | #define SERIAL_21285_MINOR 4 | |
31 | ||
32 | #define RXSTAT_DUMMY_READ 0x80000000 | |
33 | #define RXSTAT_FRAME (1 << 0) | |
34 | #define RXSTAT_PARITY (1 << 1) | |
35 | #define RXSTAT_OVERRUN (1 << 2) | |
36 | #define RXSTAT_ANYERR (RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN) | |
37 | ||
38 | #define H_UBRLCR_BREAK (1 << 0) | |
39 | #define H_UBRLCR_PARENB (1 << 1) | |
40 | #define H_UBRLCR_PAREVN (1 << 2) | |
41 | #define H_UBRLCR_STOPB (1 << 3) | |
42 | #define H_UBRLCR_FIFO (1 << 4) | |
43 | ||
44 | static const char serial21285_name[] = "Footbridge UART"; | |
45 | ||
46 | #define tx_enabled(port) ((port)->unused[0]) | |
47 | #define rx_enabled(port) ((port)->unused[1]) | |
48 | ||
49 | /* | |
50 | * The documented expression for selecting the divisor is: | |
51 | * BAUD_BASE / baud - 1 | |
52 | * However, typically BAUD_BASE is not divisible by baud, so | |
53 | * we want to select the divisor that gives us the minimum | |
54 | * error. Therefore, we want: | |
55 | * int(BAUD_BASE / baud - 0.5) -> | |
56 | * int(BAUD_BASE / baud - (baud >> 1) / baud) -> | |
57 | * int((BAUD_BASE - (baud >> 1)) / baud) | |
58 | */ | |
59 | ||
b129a8cc | 60 | static void serial21285_stop_tx(struct uart_port *port) |
1da177e4 LT |
61 | { |
62 | if (tx_enabled(port)) { | |
63 | disable_irq(IRQ_CONTX); | |
64 | tx_enabled(port) = 0; | |
65 | } | |
66 | } | |
67 | ||
b129a8cc | 68 | static void serial21285_start_tx(struct uart_port *port) |
1da177e4 LT |
69 | { |
70 | if (!tx_enabled(port)) { | |
71 | enable_irq(IRQ_CONTX); | |
72 | tx_enabled(port) = 1; | |
73 | } | |
74 | } | |
75 | ||
76 | static void serial21285_stop_rx(struct uart_port *port) | |
77 | { | |
78 | if (rx_enabled(port)) { | |
79 | disable_irq(IRQ_CONRX); | |
80 | rx_enabled(port) = 0; | |
81 | } | |
82 | } | |
83 | ||
84 | static void serial21285_enable_ms(struct uart_port *port) | |
85 | { | |
86 | } | |
87 | ||
7d12e780 | 88 | static irqreturn_t serial21285_rx_chars(int irq, void *dev_id) |
1da177e4 LT |
89 | { |
90 | struct uart_port *port = dev_id; | |
91 | struct tty_struct *tty = port->info->tty; | |
92 | unsigned int status, ch, flag, rxs, max_count = 256; | |
93 | ||
94 | status = *CSR_UARTFLG; | |
95 | while (!(status & 0x10) && max_count--) { | |
1da177e4 LT |
96 | ch = *CSR_UARTDR; |
97 | flag = TTY_NORMAL; | |
98 | port->icount.rx++; | |
99 | ||
100 | rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ; | |
45849282 | 101 | if (unlikely(rxs & RXSTAT_ANYERR)) { |
1da177e4 LT |
102 | if (rxs & RXSTAT_PARITY) |
103 | port->icount.parity++; | |
104 | else if (rxs & RXSTAT_FRAME) | |
105 | port->icount.frame++; | |
106 | if (rxs & RXSTAT_OVERRUN) | |
107 | port->icount.overrun++; | |
108 | ||
109 | rxs &= port->read_status_mask; | |
110 | ||
111 | if (rxs & RXSTAT_PARITY) | |
112 | flag = TTY_PARITY; | |
113 | else if (rxs & RXSTAT_FRAME) | |
114 | flag = TTY_FRAME; | |
115 | } | |
116 | ||
05ab3014 RK |
117 | uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag); |
118 | ||
1da177e4 LT |
119 | status = *CSR_UARTFLG; |
120 | } | |
121 | tty_flip_buffer_push(tty); | |
122 | ||
123 | return IRQ_HANDLED; | |
124 | } | |
125 | ||
7d12e780 | 126 | static irqreturn_t serial21285_tx_chars(int irq, void *dev_id) |
1da177e4 LT |
127 | { |
128 | struct uart_port *port = dev_id; | |
129 | struct circ_buf *xmit = &port->info->xmit; | |
130 | int count = 256; | |
131 | ||
132 | if (port->x_char) { | |
133 | *CSR_UARTDR = port->x_char; | |
134 | port->icount.tx++; | |
135 | port->x_char = 0; | |
136 | goto out; | |
137 | } | |
138 | if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { | |
b129a8cc | 139 | serial21285_stop_tx(port); |
1da177e4 LT |
140 | goto out; |
141 | } | |
142 | ||
143 | do { | |
144 | *CSR_UARTDR = xmit->buf[xmit->tail]; | |
145 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
146 | port->icount.tx++; | |
147 | if (uart_circ_empty(xmit)) | |
148 | break; | |
149 | } while (--count > 0 && !(*CSR_UARTFLG & 0x20)); | |
150 | ||
151 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
152 | uart_write_wakeup(port); | |
153 | ||
154 | if (uart_circ_empty(xmit)) | |
b129a8cc | 155 | serial21285_stop_tx(port); |
1da177e4 LT |
156 | |
157 | out: | |
158 | return IRQ_HANDLED; | |
159 | } | |
160 | ||
161 | static unsigned int serial21285_tx_empty(struct uart_port *port) | |
162 | { | |
163 | return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT; | |
164 | } | |
165 | ||
166 | /* no modem control lines */ | |
167 | static unsigned int serial21285_get_mctrl(struct uart_port *port) | |
168 | { | |
169 | return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; | |
170 | } | |
171 | ||
172 | static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
173 | { | |
174 | } | |
175 | ||
176 | static void serial21285_break_ctl(struct uart_port *port, int break_state) | |
177 | { | |
178 | unsigned long flags; | |
179 | unsigned int h_lcr; | |
180 | ||
181 | spin_lock_irqsave(&port->lock, flags); | |
182 | h_lcr = *CSR_H_UBRLCR; | |
183 | if (break_state) | |
184 | h_lcr |= H_UBRLCR_BREAK; | |
185 | else | |
186 | h_lcr &= ~H_UBRLCR_BREAK; | |
187 | *CSR_H_UBRLCR = h_lcr; | |
188 | spin_unlock_irqrestore(&port->lock, flags); | |
189 | } | |
190 | ||
191 | static int serial21285_startup(struct uart_port *port) | |
192 | { | |
193 | int ret; | |
194 | ||
195 | tx_enabled(port) = 1; | |
196 | rx_enabled(port) = 1; | |
197 | ||
198 | ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0, | |
199 | serial21285_name, port); | |
200 | if (ret == 0) { | |
201 | ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0, | |
202 | serial21285_name, port); | |
203 | if (ret) | |
204 | free_irq(IRQ_CONRX, port); | |
205 | } | |
206 | ||
207 | return ret; | |
208 | } | |
209 | ||
210 | static void serial21285_shutdown(struct uart_port *port) | |
211 | { | |
212 | free_irq(IRQ_CONTX, port); | |
213 | free_irq(IRQ_CONRX, port); | |
214 | } | |
215 | ||
216 | static void | |
606d099c AC |
217 | serial21285_set_termios(struct uart_port *port, struct ktermios *termios, |
218 | struct ktermios *old) | |
1da177e4 LT |
219 | { |
220 | unsigned long flags; | |
221 | unsigned int baud, quot, h_lcr; | |
222 | ||
223 | /* | |
224 | * We don't support modem control lines. | |
225 | */ | |
226 | termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); | |
227 | termios->c_cflag |= CLOCAL; | |
228 | ||
229 | /* | |
230 | * We don't support BREAK character recognition. | |
231 | */ | |
232 | termios->c_iflag &= ~(IGNBRK | BRKINT); | |
233 | ||
234 | /* | |
235 | * Ask the core to calculate the divisor for us. | |
236 | */ | |
237 | baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); | |
238 | quot = uart_get_divisor(port, baud); | |
239 | ||
2f65baff RK |
240 | if (port->info && port->info->tty) { |
241 | struct tty_struct *tty = port->info->tty; | |
242 | unsigned int b = port->uartclk / (16 * quot); | |
243 | tty_encode_baud_rate(tty, b, b); | |
244 | } | |
245 | ||
1da177e4 LT |
246 | switch (termios->c_cflag & CSIZE) { |
247 | case CS5: | |
248 | h_lcr = 0x00; | |
249 | break; | |
250 | case CS6: | |
251 | h_lcr = 0x20; | |
252 | break; | |
253 | case CS7: | |
254 | h_lcr = 0x40; | |
255 | break; | |
256 | default: /* CS8 */ | |
257 | h_lcr = 0x60; | |
258 | break; | |
259 | } | |
260 | ||
261 | if (termios->c_cflag & CSTOPB) | |
262 | h_lcr |= H_UBRLCR_STOPB; | |
263 | if (termios->c_cflag & PARENB) { | |
264 | h_lcr |= H_UBRLCR_PARENB; | |
265 | if (!(termios->c_cflag & PARODD)) | |
266 | h_lcr |= H_UBRLCR_PAREVN; | |
267 | } | |
268 | ||
269 | if (port->fifosize) | |
270 | h_lcr |= H_UBRLCR_FIFO; | |
271 | ||
272 | spin_lock_irqsave(&port->lock, flags); | |
273 | ||
274 | /* | |
275 | * Update the per-port timeout. | |
276 | */ | |
277 | uart_update_timeout(port, termios->c_cflag, baud); | |
278 | ||
279 | /* | |
280 | * Which character status flags are we interested in? | |
281 | */ | |
282 | port->read_status_mask = RXSTAT_OVERRUN; | |
283 | if (termios->c_iflag & INPCK) | |
284 | port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; | |
285 | ||
286 | /* | |
287 | * Which character status flags should we ignore? | |
288 | */ | |
289 | port->ignore_status_mask = 0; | |
290 | if (termios->c_iflag & IGNPAR) | |
291 | port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; | |
292 | if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) | |
293 | port->ignore_status_mask |= RXSTAT_OVERRUN; | |
294 | ||
295 | /* | |
296 | * Ignore all characters if CREAD is not set. | |
297 | */ | |
298 | if ((termios->c_cflag & CREAD) == 0) | |
299 | port->ignore_status_mask |= RXSTAT_DUMMY_READ; | |
300 | ||
301 | quot -= 1; | |
302 | ||
303 | *CSR_UARTCON = 0; | |
304 | *CSR_L_UBRLCR = quot & 0xff; | |
305 | *CSR_M_UBRLCR = (quot >> 8) & 0x0f; | |
306 | *CSR_H_UBRLCR = h_lcr; | |
307 | *CSR_UARTCON = 1; | |
308 | ||
309 | spin_unlock_irqrestore(&port->lock, flags); | |
310 | } | |
311 | ||
312 | static const char *serial21285_type(struct uart_port *port) | |
313 | { | |
314 | return port->type == PORT_21285 ? "DC21285" : NULL; | |
315 | } | |
316 | ||
317 | static void serial21285_release_port(struct uart_port *port) | |
318 | { | |
319 | release_mem_region(port->mapbase, 32); | |
320 | } | |
321 | ||
322 | static int serial21285_request_port(struct uart_port *port) | |
323 | { | |
324 | return request_mem_region(port->mapbase, 32, serial21285_name) | |
325 | != NULL ? 0 : -EBUSY; | |
326 | } | |
327 | ||
328 | static void serial21285_config_port(struct uart_port *port, int flags) | |
329 | { | |
330 | if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0) | |
331 | port->type = PORT_21285; | |
332 | } | |
333 | ||
334 | /* | |
335 | * verify the new serial_struct (for TIOCSSERIAL). | |
336 | */ | |
337 | static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser) | |
338 | { | |
339 | int ret = 0; | |
340 | if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285) | |
341 | ret = -EINVAL; | |
342 | if (ser->irq != NO_IRQ) | |
343 | ret = -EINVAL; | |
344 | if (ser->baud_base != port->uartclk / 16) | |
345 | ret = -EINVAL; | |
346 | return ret; | |
347 | } | |
348 | ||
349 | static struct uart_ops serial21285_ops = { | |
350 | .tx_empty = serial21285_tx_empty, | |
351 | .get_mctrl = serial21285_get_mctrl, | |
352 | .set_mctrl = serial21285_set_mctrl, | |
353 | .stop_tx = serial21285_stop_tx, | |
354 | .start_tx = serial21285_start_tx, | |
355 | .stop_rx = serial21285_stop_rx, | |
356 | .enable_ms = serial21285_enable_ms, | |
357 | .break_ctl = serial21285_break_ctl, | |
358 | .startup = serial21285_startup, | |
359 | .shutdown = serial21285_shutdown, | |
360 | .set_termios = serial21285_set_termios, | |
361 | .type = serial21285_type, | |
362 | .release_port = serial21285_release_port, | |
363 | .request_port = serial21285_request_port, | |
364 | .config_port = serial21285_config_port, | |
365 | .verify_port = serial21285_verify_port, | |
366 | }; | |
367 | ||
368 | static struct uart_port serial21285_port = { | |
369 | .mapbase = 0x42000160, | |
9b4a1617 | 370 | .iotype = UPIO_MEM, |
1da177e4 LT |
371 | .irq = NO_IRQ, |
372 | .fifosize = 16, | |
373 | .ops = &serial21285_ops, | |
ce8337cb | 374 | .flags = UPF_BOOT_AUTOCONF, |
1da177e4 LT |
375 | }; |
376 | ||
377 | static void serial21285_setup_ports(void) | |
378 | { | |
379 | serial21285_port.uartclk = mem_fclk_21285 / 4; | |
380 | } | |
381 | ||
382 | #ifdef CONFIG_SERIAL_21285_CONSOLE | |
d358788f RK |
383 | static void serial21285_console_putchar(struct uart_port *port, int ch) |
384 | { | |
385 | while (*CSR_UARTFLG & 0x20) | |
386 | barrier(); | |
387 | *CSR_UARTDR = ch; | |
388 | } | |
1da177e4 LT |
389 | |
390 | static void | |
391 | serial21285_console_write(struct console *co, const char *s, | |
392 | unsigned int count) | |
393 | { | |
d358788f | 394 | uart_console_write(&serial21285_port, s, count, serial21285_console_putchar); |
1da177e4 LT |
395 | } |
396 | ||
397 | static void __init | |
398 | serial21285_get_options(struct uart_port *port, int *baud, | |
399 | int *parity, int *bits) | |
400 | { | |
401 | if (*CSR_UARTCON == 1) { | |
402 | unsigned int tmp; | |
403 | ||
404 | tmp = *CSR_H_UBRLCR; | |
405 | switch (tmp & 0x60) { | |
406 | case 0x00: | |
407 | *bits = 5; | |
408 | break; | |
409 | case 0x20: | |
410 | *bits = 6; | |
411 | break; | |
412 | case 0x40: | |
413 | *bits = 7; | |
414 | break; | |
415 | default: | |
416 | case 0x60: | |
417 | *bits = 8; | |
418 | break; | |
419 | } | |
420 | ||
421 | if (tmp & H_UBRLCR_PARENB) { | |
422 | *parity = 'o'; | |
423 | if (tmp & H_UBRLCR_PAREVN) | |
424 | *parity = 'e'; | |
425 | } | |
426 | ||
427 | tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8); | |
428 | ||
429 | *baud = port->uartclk / (16 * (tmp + 1)); | |
430 | } | |
431 | } | |
432 | ||
433 | static int __init serial21285_console_setup(struct console *co, char *options) | |
434 | { | |
435 | struct uart_port *port = &serial21285_port; | |
436 | int baud = 9600; | |
437 | int bits = 8; | |
438 | int parity = 'n'; | |
439 | int flow = 'n'; | |
440 | ||
441 | if (machine_is_personal_server()) | |
442 | baud = 57600; | |
443 | ||
444 | /* | |
445 | * Check whether an invalid uart number has been specified, and | |
446 | * if so, search for the first available port that does have | |
447 | * console support. | |
448 | */ | |
449 | if (options) | |
450 | uart_parse_options(options, &baud, &parity, &bits, &flow); | |
451 | else | |
452 | serial21285_get_options(port, &baud, &parity, &bits); | |
453 | ||
454 | return uart_set_options(port, co, baud, parity, bits, flow); | |
455 | } | |
456 | ||
2d93486c | 457 | static struct uart_driver serial21285_reg; |
1da177e4 LT |
458 | |
459 | static struct console serial21285_console = | |
460 | { | |
461 | .name = SERIAL_21285_NAME, | |
462 | .write = serial21285_console_write, | |
463 | .device = uart_console_device, | |
464 | .setup = serial21285_console_setup, | |
465 | .flags = CON_PRINTBUFFER, | |
466 | .index = -1, | |
467 | .data = &serial21285_reg, | |
468 | }; | |
469 | ||
470 | static int __init rs285_console_init(void) | |
471 | { | |
472 | serial21285_setup_ports(); | |
473 | register_console(&serial21285_console); | |
474 | return 0; | |
475 | } | |
476 | console_initcall(rs285_console_init); | |
477 | ||
478 | #define SERIAL_21285_CONSOLE &serial21285_console | |
479 | #else | |
480 | #define SERIAL_21285_CONSOLE NULL | |
481 | #endif | |
482 | ||
483 | static struct uart_driver serial21285_reg = { | |
484 | .owner = THIS_MODULE, | |
485 | .driver_name = "ttyFB", | |
486 | .dev_name = "ttyFB", | |
1da177e4 LT |
487 | .major = SERIAL_21285_MAJOR, |
488 | .minor = SERIAL_21285_MINOR, | |
489 | .nr = 1, | |
490 | .cons = SERIAL_21285_CONSOLE, | |
491 | }; | |
492 | ||
493 | static int __init serial21285_init(void) | |
494 | { | |
495 | int ret; | |
496 | ||
497 | printk(KERN_INFO "Serial: 21285 driver $Revision: 1.37 $\n"); | |
498 | ||
499 | serial21285_setup_ports(); | |
500 | ||
501 | ret = uart_register_driver(&serial21285_reg); | |
502 | if (ret == 0) | |
503 | uart_add_one_port(&serial21285_reg, &serial21285_port); | |
504 | ||
505 | return ret; | |
506 | } | |
507 | ||
508 | static void __exit serial21285_exit(void) | |
509 | { | |
510 | uart_remove_one_port(&serial21285_reg, &serial21285_port); | |
511 | uart_unregister_driver(&serial21285_reg); | |
512 | } | |
513 | ||
514 | module_init(serial21285_init); | |
515 | module_exit(serial21285_exit); | |
516 | ||
517 | MODULE_LICENSE("GPL"); | |
518 | MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver $Revision: 1.37 $"); | |
519 | MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR); |