projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[PATCH] Altix ioc4 serial - set hfc from ioctl
[deliverable/linux.git] / drivers / serial / ioc4_serial.c
CommitLineData
1da177e4
LT		 1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 2003-2005 Silicon Graphics, Inc. All Rights Reserved.
7 */
8
9
10/*
11 * This file contains a module version of the ioc4 serial driver. This
12 * includes all the support functions needed (support functions, etc.)
13 * and the serial driver itself.
14 */
15#include <linux/errno.h>
16#include <linux/tty.h>
17#include <linux/serial.h>
18#include <linux/serialP.h>
19#include <linux/circ_buf.h>
20#include <linux/serial_reg.h>
21#include <linux/module.h>
22#include <linux/pci.h>
23#include <linux/ioc4_common.h>
24#include <linux/serial_core.h>
25
26/*
27 * interesting things about the ioc4
28 */
29
30#define IOC4_NUM_SERIAL_PORTS 4 /* max ports per card */
31#define IOC4_NUM_CARDS 8 /* max cards per partition */
32
33#define GET_SIO_IR(_n) (_n == 0) ? (IOC4_SIO_IR_S0) : \
34 (_n == 1) ? (IOC4_SIO_IR_S1) : \
35 (_n == 2) ? (IOC4_SIO_IR_S2) : \
36 (IOC4_SIO_IR_S3)
37
38#define GET_OTHER_IR(_n) (_n == 0) ? (IOC4_OTHER_IR_S0_MEMERR) : \
39 (_n == 1) ? (IOC4_OTHER_IR_S1_MEMERR) : \
40 (_n == 2) ? (IOC4_OTHER_IR_S2_MEMERR) : \
41 (IOC4_OTHER_IR_S3_MEMERR)
42
43
44/*
45 * All IOC4 registers are 32 bits wide.
46 */
47
48/*
49 * PCI Memory Space Map
50 */
51#define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */
52#define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0)
53#define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1)
54#define IOC4_PCI_ERR_ADDR_MST_NUM_MSK (0xe << 1)
55#define IOC4_PCI_ERR_ADDR_MST_TYP_MSK (0x1 << 1)
56#define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5)
57#define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6)
58
59/* Interrupt types */
60#define IOC4_SIO_INTR_TYPE 0
61#define IOC4_OTHER_INTR_TYPE 1
62#define IOC4_NUM_INTR_TYPES 2
63
64/* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */
65#define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */
66#define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */
67#define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */
68#define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */
69#define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */
70#define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */
71#define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */
72#define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */
73#define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */
74#define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */
75#define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */
76#define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */
77#define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */
78#define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */
79#define IOC4_SIO_IR_S1_INT 0x00004000 /* */
80#define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */
81#define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */
82#define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */
83#define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */
84#define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */
85#define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */
86#define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */
87#define IOC4_SIO_IR_S2_INT 0x00400000 /* */
88#define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */
89#define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */
90#define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */
91#define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */
92#define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */
93#define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */
94#define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */
95#define IOC4_SIO_IR_S3_INT 0x40000000 /* */
96#define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */
97
98/* Per device interrupt masks */
99#define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \
100 IOC4_SIO_IR_S0_RX_FULL | \
101 IOC4_SIO_IR_S0_RX_HIGH | \
102 IOC4_SIO_IR_S0_RX_TIMER | \
103 IOC4_SIO_IR_S0_DELTA_DCD | \
104 IOC4_SIO_IR_S0_DELTA_CTS | \
105 IOC4_SIO_IR_S0_INT | \
106 IOC4_SIO_IR_S0_TX_EXPLICIT)
107#define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \
108 IOC4_SIO_IR_S1_RX_FULL | \
109 IOC4_SIO_IR_S1_RX_HIGH | \
110 IOC4_SIO_IR_S1_RX_TIMER | \
111 IOC4_SIO_IR_S1_DELTA_DCD | \
112 IOC4_SIO_IR_S1_DELTA_CTS | \
113 IOC4_SIO_IR_S1_INT | \
114 IOC4_SIO_IR_S1_TX_EXPLICIT)
115#define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \
116 IOC4_SIO_IR_S2_RX_FULL | \
117 IOC4_SIO_IR_S2_RX_HIGH | \
118 IOC4_SIO_IR_S2_RX_TIMER | \
119 IOC4_SIO_IR_S2_DELTA_DCD | \
120 IOC4_SIO_IR_S2_DELTA_CTS | \
121 IOC4_SIO_IR_S2_INT | \
122 IOC4_SIO_IR_S2_TX_EXPLICIT)
123#define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \
124 IOC4_SIO_IR_S3_RX_FULL | \
125 IOC4_SIO_IR_S3_RX_HIGH | \
126 IOC4_SIO_IR_S3_RX_TIMER | \
127 IOC4_SIO_IR_S3_DELTA_DCD | \
128 IOC4_SIO_IR_S3_DELTA_CTS | \
129 IOC4_SIO_IR_S3_INT | \
130 IOC4_SIO_IR_S3_TX_EXPLICIT)
131
132/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */
133#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */
134#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */
135#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */
136#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */
137#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */
138#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */
139
140/* Bitmasks for IOC4_SIO_CR */
141#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */
142#define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000
143#define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010
144#define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020
145#define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030
146#define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040
147#define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050
148#define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060
149#define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070
150#define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among
151 serial ports (ro) */
152/* Defs for some of the generic I/O pins */
153#define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0
154 mode sel */
155#define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1
156 mode sel */
157#define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2
158 mode sel */
159#define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3
160 mode sel */
161
162#define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling
163 uart 0 mode select */
164#define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling
165 uart 1 mode select */
166#define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling
167 uart 2 mode select */
168#define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling
169 uart 3 mode select */
170
171/* Bitmasks for serial RX status byte */
172#define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */
173#define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */
174#define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */
175#define IOC4_RXSB_BREAK 0x08 /* Break character */
176#define IOC4_RXSB_CTS 0x10 /* State of CTS */
177#define IOC4_RXSB_DCD 0x20 /* State of DCD */
178#define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */
179#define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR
180 * & BREAK valid */
181
182/* Bitmasks for serial TX control byte */
183#define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */
184#define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */
185#define IOC4_TXCB_VALID 0x40 /* Byte is valid */
186#define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control reg */
187#define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */
188
189/* Bitmasks for IOC4_SBBR_L */
190#define IOC4_SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */
191
192/* Bitmasks for IOC4_SSCR_<3:0> */
193#define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */
194#define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */
195#define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */
196#define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */
197#define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */
198#define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */
199#define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */
200#define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */
201#define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */
202#define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */
203#define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */
204
205/* All producer/comsumer pointers are the same bitfield */
206#define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */
207#define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */
208#define IOC4_PROD_CONS_PTR_OFF 3
209
210/* Bitmasks for IOC4_SRCIR_<3:0> */
211#define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */
212
213/* Bitmasks for IOC4_SHADOW_<3:0> */
214#define IOC4_SHADOW_DR 0x00000001 /* Data ready */
215#define IOC4_SHADOW_OE 0x00000002 /* Overrun error */
216#define IOC4_SHADOW_PE 0x00000004 /* Parity error */
217#define IOC4_SHADOW_FE 0x00000008 /* Framing error */
218#define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */
219#define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */
220#define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */
221#define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */
222#define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */
223#define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */
224#define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */
225#define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */
226#define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */
227#define IOC4_SHADOW_RTS 0x02000000 /* Request to send */
228#define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */
229#define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */
230#define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */
231
232/* Bitmasks for IOC4_SRTR_<3:0> */
233#define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */
234#define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */
235#define IOC4_SRTR_CNT_VAL_SHIFT 16
236#define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */
237
238/* Serial port register map used for DMA and PIO serial I/O */
239struct ioc4_serialregs {
240 uint32_t sscr;
241 uint32_t stpir;
242 uint32_t stcir;
243 uint32_t srpir;
244 uint32_t srcir;
245 uint32_t srtr;
246 uint32_t shadow;
247};
248
249/* IOC4 UART register map */
250struct ioc4_uartregs {
251 char i4u_lcr;
252 union {
253 char iir; /* read only */
254 char fcr; /* write only */
255 } u3;
256 union {
257 char ier; /* DLAB == 0 */
258 char dlm; /* DLAB == 1 */
259 } u2;
260 union {
261 char rbr; /* read only, DLAB == 0 */
262 char thr; /* write only, DLAB == 0 */
263 char dll; /* DLAB == 1 */
264 } u1;
265 char i4u_scr;
266 char i4u_msr;
267 char i4u_lsr;
268 char i4u_mcr;
269};
270
271/* short names */
272#define i4u_dll u1.dll
273#define i4u_ier u2.ier
274#define i4u_dlm u2.dlm
275#define i4u_fcr u3.fcr
276
277/* PCI memory space register map addressed using pci_bar0 */
278struct ioc4_memregs {
279 struct ioc4_mem {
280 /* Miscellaneous IOC4 registers */
281 uint32_t pci_err_addr_l;
282 uint32_t pci_err_addr_h;
283 uint32_t sio_ir;
284 uint32_t other_ir;
285
286 /* These registers are read-only for general kernel code. */
287 uint32_t sio_ies_ro;
288 uint32_t other_ies_ro;
289 uint32_t sio_iec_ro;
290 uint32_t other_iec_ro;
291 uint32_t sio_cr;
292 uint32_t misc_fill1;
293 uint32_t int_out;
294 uint32_t misc_fill2;
295 uint32_t gpcr_s;
296 uint32_t gpcr_c;
297 uint32_t gpdr;
298 uint32_t misc_fill3;
299 uint32_t gppr_0;
300 uint32_t gppr_1;
301 uint32_t gppr_2;
302 uint32_t gppr_3;
303 uint32_t gppr_4;
304 uint32_t gppr_5;
305 uint32_t gppr_6;
306 uint32_t gppr_7;
307 } ioc4_mem;
308
309 char misc_fill4[0x100 - 0x5C - 4];
310
311 /* ATA/ATAP registers */
312 uint32_t ata_notused[9];
313 char ata_fill1[0x140 - 0x120 - 4];
314 uint32_t ata_notused1[8];
315 char ata_fill2[0x200 - 0x15C - 4];
316
317 /* Keyboard and mouse registers */
318 uint32_t km_notused[5];;
319 char km_fill1[0x300 - 0x210 - 4];
320
321 /* Serial port registers used for DMA serial I/O */
322 struct ioc4_serial {
323 uint32_t sbbr01_l;
324 uint32_t sbbr01_h;
325 uint32_t sbbr23_l;
326 uint32_t sbbr23_h;
327
328 struct ioc4_serialregs port_0;
329 struct ioc4_serialregs port_1;
330 struct ioc4_serialregs port_2;
331 struct ioc4_serialregs port_3;
332 struct ioc4_uartregs uart_0;
333 struct ioc4_uartregs uart_1;
334 struct ioc4_uartregs uart_2;
335 struct ioc4_uartregs uart_3;
336 } ioc4_serial;
337};
338
339/* UART clock speed */
340#define IOC4_SER_XIN_CLK IOC4_SER_XIN_CLK_66
341#define IOC4_SER_XIN_CLK_66 66666667
342#define IOC4_SER_XIN_CLK_33 33333333
343
344#define IOC4_W_IES 0
345#define IOC4_W_IEC 1
346
347typedef void ioc4_intr_func_f(void *, uint32_t);
348typedef ioc4_intr_func_f *ioc4_intr_func_t;
349
350/* defining this will get you LOTS of great debug info */
351//#define DEBUG_INTERRUPTS
352#define DPRINT_CONFIG(_x...) ;
353//#define DPRINT_CONFIG(_x...) printk _x
354
355/* number of characters left in xmit buffer before we ask for more */
356#define WAKEUP_CHARS 256
357
358/* number of characters we want to transmit to the lower level at a time */
359#define IOC4_MAX_CHARS 128
360
361/* Device name we're using */
362#define DEVICE_NAME "ttyIOC"
363#define DEVICE_MAJOR 204
364#define DEVICE_MINOR 50
365
366/* register offsets */
367#define IOC4_SERIAL_OFFSET 0x300
368
369/* flags for next_char_state */
370#define NCS_BREAK 0x1
371#define NCS_PARITY 0x2
372#define NCS_FRAMING 0x4
373#define NCS_OVERRUN 0x8
374
375/* cause we need SOME parameters ... */
376#define MIN_BAUD_SUPPORTED 1200
377#define MAX_BAUD_SUPPORTED 115200
378
379/* protocol types supported */
380enum sio_proto {
381 PROTO_RS232,
382 PROTO_RS422
383};
384
385/* Notification types */
386#define N_DATA_READY 0x01
387#define N_OUTPUT_LOWAT 0x02
388#define N_BREAK 0x04
389#define N_PARITY_ERROR 0x08
390#define N_FRAMING_ERROR 0x10
391#define N_OVERRUN_ERROR 0x20
392#define N_DDCD 0x40
393#define N_DCTS 0x80
394
395#define N_ALL_INPUT (N_DATA_READY | N_BREAK | \
396 N_PARITY_ERROR | N_FRAMING_ERROR | \
397 N_OVERRUN_ERROR | N_DDCD | N_DCTS)
398
399#define N_ALL_OUTPUT N_OUTPUT_LOWAT
400
401#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR | N_OVERRUN_ERROR)
402
403#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK | \
404 N_PARITY_ERROR | N_FRAMING_ERROR | \
405 N_OVERRUN_ERROR | N_DDCD | N_DCTS)
406
407#define SER_DIVISOR(_x, clk) (((clk) + (_x) * 8) / ((_x) * 16))
408#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div))
409
410/* Some masks */
411#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \
412 | UART_LCR_WLEN7 | UART_LCR_WLEN8)
413#define LCR_MASK_STOP_BITS (UART_LCR_STOP)
414
415#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir) & _p->ip_ienb)
416#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir)
417
418/* Default to 4k buffers */
419#ifdef IOC4_1K_BUFFERS
420#define RING_BUF_SIZE 1024
421#define IOC4_BUF_SIZE_BIT 0
422#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_1K
423#else
424#define RING_BUF_SIZE 4096
425#define IOC4_BUF_SIZE_BIT IOC4_SBBR_L_SIZE
426#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_4K
427#endif
428
429#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4)
430
431/*
432 * This is the entry saved by the driver - one per card
433 */
434struct ioc4_control {
435 int ic_irq;
436 struct {
437 /* uart ports are allocated here */
438 struct uart_port icp_uart_port;
439 /* Handy reference material */
440 struct ioc4_port *icp_port;
441 } ic_port[IOC4_NUM_SERIAL_PORTS];
442 struct ioc4_soft *ic_soft;
443};
444
445/*
446 * per-IOC4 data structure
447 */
448#define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t))
449struct ioc4_soft {
450 struct ioc4_mem __iomem *is_ioc4_mem_addr;
451 struct ioc4_serial __iomem *is_ioc4_serial_addr;
452
453 /* Each interrupt type has an entry in the array */
454 struct ioc4_intr_type {
455
456 /*
457 * Each in-use entry in this array contains at least
458 * one nonzero bit in sd_bits; no two entries in this
459 * array have overlapping sd_bits values.
460 */
461 struct ioc4_intr_info {
462 uint32_t sd_bits;
463 ioc4_intr_func_f *sd_intr;
464 void *sd_info;
465 } is_intr_info[MAX_IOC4_INTR_ENTS];
466
467 /* Number of entries active in the above array */
468 atomic_t is_num_intrs;
469 } is_intr_type[IOC4_NUM_INTR_TYPES];
470
471 /* is_ir_lock must be held while
472 * modifying sio_ie values, so
473 * we can be sure that sio_ie is
474 * not changing when we read it
475 * along with sio_ir.
476 */
477 spinlock_t is_ir_lock; /* SIO_IE[SC] mod lock */
478};
479
480/* Local port info for each IOC4 serial ports */
481struct ioc4_port {
482 struct uart_port *ip_port;
483 /* Back ptrs for this port */
484 struct ioc4_control *ip_control;
485 struct pci_dev *ip_pdev;
486 struct ioc4_soft *ip_ioc4_soft;
487
488 /* pci mem addresses */
489 struct ioc4_mem __iomem *ip_mem;
490 struct ioc4_serial __iomem *ip_serial;
491 struct ioc4_serialregs __iomem *ip_serial_regs;
492 struct ioc4_uartregs __iomem *ip_uart_regs;
493
494 /* Ring buffer page for this port */
495 dma_addr_t ip_dma_ringbuf;
496 /* vaddr of ring buffer */
497 struct ring_buffer *ip_cpu_ringbuf;
498
499 /* Rings for this port */
500 struct ring *ip_inring;
501 struct ring *ip_outring;
502
503 /* Hook to port specific values */
504 struct hooks *ip_hooks;
505
506 spinlock_t ip_lock;
507
508 /* Various rx/tx parameters */
509 int ip_baud;
510 int ip_tx_lowat;
511 int ip_rx_timeout;
512
513 /* Copy of notification bits */
514 int ip_notify;
515
516 /* Shadow copies of various registers so we don't need to PIO
517 * read them constantly
518 */
519 uint32_t ip_ienb; /* Enabled interrupts */
520 uint32_t ip_sscr;
521 uint32_t ip_tx_prod;
522 uint32_t ip_rx_cons;
523 int ip_pci_bus_speed;
524 unsigned char ip_flags;
525};
526
527/* tx low water mark. We need to notify the driver whenever tx is getting
528 * close to empty so it can refill the tx buffer and keep things going.
529 * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll
530 * have no trouble getting in more chars in time (I certainly hope so).
531 */
532#define TX_LOWAT_LATENCY 1000
533#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY)
534#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ)
535
536/* Flags per port */
537#define INPUT_HIGH 0x01
538#define DCD_ON 0x02
539#define LOWAT_WRITTEN 0x04
540#define READ_ABORTED 0x08
541
542/* Since each port has different register offsets and bitmasks
543 * for everything, we'll store those that we need in tables so we
544 * don't have to be constantly checking the port we are dealing with.
545 */
546struct hooks {
547 uint32_t intr_delta_dcd;
548 uint32_t intr_delta_cts;
549 uint32_t intr_tx_mt;
550 uint32_t intr_rx_timer;
551 uint32_t intr_rx_high;
552 uint32_t intr_tx_explicit;
553 uint32_t intr_dma_error;
554 uint32_t intr_clear;
555 uint32_t intr_all;
556 char rs422_select_pin;
557};
558
559static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = {
560 /* Values for port 0 */
561 {
562 IOC4_SIO_IR_S0_DELTA_DCD, IOC4_SIO_IR_S0_DELTA_CTS,
563 IOC4_SIO_IR_S0_TX_MT, IOC4_SIO_IR_S0_RX_TIMER,
564 IOC4_SIO_IR_S0_RX_HIGH, IOC4_SIO_IR_S0_TX_EXPLICIT,
565 IOC4_OTHER_IR_S0_MEMERR,
566 (IOC4_SIO_IR_S0_TX_MT | IOC4_SIO_IR_S0_RX_FULL |
567 IOC4_SIO_IR_S0_RX_HIGH | IOC4_SIO_IR_S0_RX_TIMER |
568 IOC4_SIO_IR_S0_DELTA_DCD | IOC4_SIO_IR_S0_DELTA_CTS |
569 IOC4_SIO_IR_S0_INT | IOC4_SIO_IR_S0_TX_EXPLICIT),
570 IOC4_SIO_IR_S0, IOC4_GPPR_UART0_MODESEL_PIN,
571 },
572
573 /* Values for port 1 */
574 {
575 IOC4_SIO_IR_S1_DELTA_DCD, IOC4_SIO_IR_S1_DELTA_CTS,
576 IOC4_SIO_IR_S1_TX_MT, IOC4_SIO_IR_S1_RX_TIMER,
577 IOC4_SIO_IR_S1_RX_HIGH, IOC4_SIO_IR_S1_TX_EXPLICIT,
578 IOC4_OTHER_IR_S1_MEMERR,
579 (IOC4_SIO_IR_S1_TX_MT | IOC4_SIO_IR_S1_RX_FULL |
580 IOC4_SIO_IR_S1_RX_HIGH | IOC4_SIO_IR_S1_RX_TIMER |
581 IOC4_SIO_IR_S1_DELTA_DCD | IOC4_SIO_IR_S1_DELTA_CTS |
582 IOC4_SIO_IR_S1_INT | IOC4_SIO_IR_S1_TX_EXPLICIT),
583 IOC4_SIO_IR_S1, IOC4_GPPR_UART1_MODESEL_PIN,
584 },
585
586 /* Values for port 2 */
587 {
588 IOC4_SIO_IR_S2_DELTA_DCD, IOC4_SIO_IR_S2_DELTA_CTS,
589 IOC4_SIO_IR_S2_TX_MT, IOC4_SIO_IR_S2_RX_TIMER,
590 IOC4_SIO_IR_S2_RX_HIGH, IOC4_SIO_IR_S2_TX_EXPLICIT,
591 IOC4_OTHER_IR_S2_MEMERR,
592 (IOC4_SIO_IR_S2_TX_MT | IOC4_SIO_IR_S2_RX_FULL |
593 IOC4_SIO_IR_S2_RX_HIGH | IOC4_SIO_IR_S2_RX_TIMER |
594 IOC4_SIO_IR_S2_DELTA_DCD | IOC4_SIO_IR_S2_DELTA_CTS |
595 IOC4_SIO_IR_S2_INT | IOC4_SIO_IR_S2_TX_EXPLICIT),
596 IOC4_SIO_IR_S2, IOC4_GPPR_UART2_MODESEL_PIN,
597 },
598
599 /* Values for port 3 */
600 {
601 IOC4_SIO_IR_S3_DELTA_DCD, IOC4_SIO_IR_S3_DELTA_CTS,
602 IOC4_SIO_IR_S3_TX_MT, IOC4_SIO_IR_S3_RX_TIMER,
603 IOC4_SIO_IR_S3_RX_HIGH, IOC4_SIO_IR_S3_TX_EXPLICIT,
604 IOC4_OTHER_IR_S3_MEMERR,
605 (IOC4_SIO_IR_S3_TX_MT | IOC4_SIO_IR_S3_RX_FULL |
606 IOC4_SIO_IR_S3_RX_HIGH | IOC4_SIO_IR_S3_RX_TIMER |
607 IOC4_SIO_IR_S3_DELTA_DCD | IOC4_SIO_IR_S3_DELTA_CTS |
608 IOC4_SIO_IR_S3_INT | IOC4_SIO_IR_S3_TX_EXPLICIT),
609 IOC4_SIO_IR_S3, IOC4_GPPR_UART3_MODESEL_PIN,
610 }
611};
612
613/* A ring buffer entry */
614struct ring_entry {
615 union {
616 struct {
617 uint32_t alldata;
618 uint32_t allsc;
619 } all;
620 struct {
621 char data[4]; /* data bytes */
622 char sc[4]; /* status/control */
623 } s;
624 } u;
625};
626
627/* Test the valid bits in any of the 4 sc chars using "allsc" member */
628#define RING_ANY_VALID \
629 ((uint32_t)(IOC4_RXSB_MODEM_VALID | IOC4_RXSB_DATA_VALID) * 0x01010101)
630
631#define ring_sc u.s.sc
632#define ring_data u.s.data
633#define ring_allsc u.all.allsc
634
635/* Number of entries per ring buffer. */
636#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry))
637
638/* An individual ring */
639struct ring {
640 struct ring_entry entries[ENTRIES_PER_RING];
641};
642
643/* The whole enchilada */
644struct ring_buffer {
645 struct ring TX_0_OR_2;
646 struct ring RX_0_OR_2;
647 struct ring TX_1_OR_3;
648 struct ring RX_1_OR_3;
649};
650
651/* Get a ring from a port struct */
652#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh)
653
654/* Infinite loop detection.
655 */
656#define MAXITER 10000000
657
658/* Prototypes */
659static void receive_chars(struct uart_port *);
660static void handle_intr(void *arg, uint32_t sio_ir);
661
662/**
663 * write_ireg - write the interrupt regs
664 * @ioc4_soft: ptr to soft struct for this port
665 * @val: value to write
666 * @which: which register
667 * @type: which ireg set
668 */
669static inline void
670write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type)
671{
672 struct ioc4_mem __iomem *mem = ioc4_soft->is_ioc4_mem_addr;
673 unsigned long flags;
674
675 spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags);
676
677 switch (type) {
678 case IOC4_SIO_INTR_TYPE:
679 switch (which) {
680 case IOC4_W_IES:
681 writel(val, &mem->sio_ies_ro);
682 break;
683
684 case IOC4_W_IEC:
685 writel(val, &mem->sio_iec_ro);
686 break;
687 }
688 break;
689
690 case IOC4_OTHER_INTR_TYPE:
691 switch (which) {
692 case IOC4_W_IES:
693 writel(val, &mem->other_ies_ro);
694 break;
695
696 case IOC4_W_IEC:
697 writel(val, &mem->other_iec_ro);
698 break;
699 }
700 break;
701
702 default:
703 break;
704 }
705 spin_unlock_irqrestore(&ioc4_soft->is_ir_lock, flags);
706}
707
708/**
709 * set_baud - Baud rate setting code
710 * @port: port to set
711 * @baud: baud rate to use
712 */
713static int set_baud(struct ioc4_port *port, int baud)
714{
715 int actual_baud;
716 int diff;
717 int lcr;
718 unsigned short divisor;
719 struct ioc4_uartregs __iomem *uart;
720
721 divisor = SER_DIVISOR(baud, port->ip_pci_bus_speed);
722 if (!divisor)
723 return 1;
724 actual_baud = DIVISOR_TO_BAUD(divisor, port->ip_pci_bus_speed);
725
726 diff = actual_baud - baud;
727 if (diff < 0)
728 diff = -diff;
729
730 /* If we're within 1%, we've found a match */
731 if (diff * 100 > actual_baud)
732 return 1;
733
734 uart = port->ip_uart_regs;
735 lcr = readb(&uart->i4u_lcr);
736 writeb(lcr | UART_LCR_DLAB, &uart->i4u_lcr);
737 writeb((unsigned char)divisor, &uart->i4u_dll);
738 writeb((unsigned char)(divisor >> 8), &uart->i4u_dlm);
739 writeb(lcr, &uart->i4u_lcr);
740 return 0;
741}
742
743
744/**
745 * get_ioc4_port - given a uart port, return the control structure
746 * @port: uart port
747 */
748static struct ioc4_port *get_ioc4_port(struct uart_port *the_port)
749{
750 struct ioc4_control *control = dev_get_drvdata(the_port->dev);
751 int ii;
752
753 if (control) {
754 for ( ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++ ) {
755 if (!control->ic_port[ii].icp_port)
756 continue;
757 if (the_port == control->ic_port[ii].icp_port->ip_port)
758 return control->ic_port[ii].icp_port;
759 }
760 }
761 return NULL;
762}
763
764/* The IOC4 hardware provides no atomic way to determine if interrupts
765 * are pending since two reads are required to do so. The handler must
766 * read the SIO_IR and the SIO_IES, and take the logical and of the
767 * two. When this value is zero, all interrupts have been serviced and
768 * the handler may return.
769 *
770 * This has the unfortunate "hole" that, if some other CPU or
771 * some other thread or some higher level interrupt manages to
772 * modify SIO_IE between our reads of SIO_IR and SIO_IE, we may
773 * think we have observed SIO_IR&SIO_IE==0 when in fact this
774 * condition never really occurred.
775 *
776 * To solve this, we use a simple spinlock that must be held
777 * whenever modifying SIO_IE; holding this lock while observing
778 * both SIO_IR and SIO_IE guarantees that we do not falsely
779 * conclude that no enabled interrupts are pending.
780 */
781
782static inline uint32_t
783pending_intrs(struct ioc4_soft *soft, int type)
784{
785 struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr;
786 unsigned long flag;
787 uint32_t intrs = 0;
788
789 BUG_ON(!((type == IOC4_SIO_INTR_TYPE)
790 || (type == IOC4_OTHER_INTR_TYPE)));
791
792 spin_lock_irqsave(&soft->is_ir_lock, flag);
793
794 switch (type) {
795 case IOC4_SIO_INTR_TYPE:
796 intrs = readl(&mem->sio_ir) & readl(&mem->sio_ies_ro);
797 break;
798
799 case IOC4_OTHER_INTR_TYPE:
800 intrs = readl(&mem->other_ir) & readl(&mem->other_ies_ro);
801
802 /* Don't process any ATA interrupte */
803 intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
804 break;
805
806 default:
807 break;
808 }
809 spin_unlock_irqrestore(&soft->is_ir_lock, flag);
810 return intrs;
811}
812
813/**
814 * port_init - Initialize the sio and ioc4 hardware for a given port
815 * called per port from attach...
816 * @port: port to initialize
817 */
818static int inline port_init(struct ioc4_port *port)
819{
820 uint32_t sio_cr;
821 struct hooks *hooks = port->ip_hooks;
822 struct ioc4_uartregs __iomem *uart;
823
824 /* Idle the IOC4 serial interface */
825 writel(IOC4_SSCR_RESET, &port->ip_serial_regs->sscr);
826
827 /* Wait until any pending bus activity for this port has ceased */
828 do
829 sio_cr = readl(&port->ip_mem->sio_cr);
830 while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE));
831
832 /* Finish reset sequence */
833 writel(0, &port->ip_serial_regs->sscr);
834
835 /* Once RESET is done, reload cached tx_prod and rx_cons values
836 * and set rings to empty by making prod == cons
837 */
838 port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
839 writel(port->ip_tx_prod, &port->ip_serial_regs->stpir);
840 port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
841 writel(port->ip_rx_cons, &port->ip_serial_regs->srcir);
842
843 /* Disable interrupts for this 16550 */
844 uart = port->ip_uart_regs;
845 writeb(0, &uart->i4u_lcr);
846 writeb(0, &uart->i4u_ier);
847
848 /* Set the default baud */
849 set_baud(port, port->ip_baud);
850
851 /* Set line control to 8 bits no parity */
852 writeb(UART_LCR_WLEN8 | 0, &uart->i4u_lcr);
853 /* UART_LCR_STOP == 1 stop */
854
855 /* Enable the FIFOs */
856 writeb(UART_FCR_ENABLE_FIFO, &uart->i4u_fcr);
857 /* then reset 16550 FIFOs */
858 writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
859 &uart->i4u_fcr);
860
861 /* Clear modem control register */
862 writeb(0, &uart->i4u_mcr);
863
864 /* Clear deltas in modem status register */
865 readb(&uart->i4u_msr);
866
867 /* Only do this once per port pair */
868 if (port->ip_hooks == &hooks_array[0]
869 || port->ip_hooks == &hooks_array[2]) {
870 unsigned long ring_pci_addr;
871 uint32_t __iomem *sbbr_l;
872 uint32_t __iomem *sbbr_h;
873
874 if (port->ip_hooks == &hooks_array[0]) {
875 sbbr_l = &port->ip_serial->sbbr01_l;
876 sbbr_h = &port->ip_serial->sbbr01_h;
877 } else {
878 sbbr_l = &port->ip_serial->sbbr23_l;
879 sbbr_h = &port->ip_serial->sbbr23_h;
880 }
881
882 ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf;
883 DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n",
884 __FUNCTION__, ring_pci_addr));
885
886 writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h);
887 writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l);
888 }
889
890 /* Set the receive timeout value to 10 msec */
891 writel(IOC4_SRTR_HZ / 100, &port->ip_serial_regs->srtr);
892
893 /* Set rx threshold, enable DMA */
894 /* Set high water mark at 3/4 of full ring */
895 port->ip_sscr = (ENTRIES_PER_RING * 3 / 4);
896 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
897
898 /* Disable and clear all serial related interrupt bits */
899 write_ireg(port->ip_ioc4_soft, hooks->intr_clear,
900 IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
901 port->ip_ienb &= ~hooks->intr_clear;
902 writel(hooks->intr_clear, &port->ip_mem->sio_ir);
903 return 0;
904}
905
906/**
907 * handle_dma_error_intr - service any pending DMA error interrupts for the
908 * given port - 2nd level called via sd_intr
909 * @arg: handler arg
910 * @other_ir: ioc4regs
911 */
912static void handle_dma_error_intr(void *arg, uint32_t other_ir)
913{
914 struct ioc4_port *port = (struct ioc4_port *)arg;
915 struct hooks *hooks = port->ip_hooks;
916 unsigned int flags;
917
918 spin_lock_irqsave(&port->ip_lock, flags);
919
920 /* ACK the interrupt */
921 writel(hooks->intr_dma_error, &port->ip_mem->other_ir);
922
923 if (readl(&port->ip_mem->pci_err_addr_l) & IOC4_PCI_ERR_ADDR_VLD) {
924 printk(KERN_ERR
925 "PCI error address is 0x%lx, "
926 "master is serial port %c %s\n",
927 (((uint64_t)readl(&port->ip_mem->pci_err_addr_h)
928 << 32)
929 | readl(&port->ip_mem->pci_err_addr_l))
930 & IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' +
931 ((char)(readl(&port->ip_mem-> pci_err_addr_l) &
932 IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1),
933 (readl(&port->ip_mem->pci_err_addr_l)
934 & IOC4_PCI_ERR_ADDR_MST_TYP_MSK)
935 ? "RX" : "TX");
936
937 if (readl(&port->ip_mem->pci_err_addr_l)
938 & IOC4_PCI_ERR_ADDR_MUL_ERR) {
939 printk(KERN_ERR
940 "Multiple errors occurred\n");
941 }
942 }
943 spin_unlock_irqrestore(&port->ip_lock, flags);
944
945 /* Re-enable DMA error interrupts */
946 write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, IOC4_W_IES,
947 IOC4_OTHER_INTR_TYPE);
948}
949
950/**
951 * intr_connect - interrupt connect function
952 * @soft: soft struct for this card
953 * @type: interrupt type
954 * @intrbits: bit pattern to set
955 * @intr: handler function
956 * @info: handler arg
957 */
958static void
959intr_connect(struct ioc4_soft *soft, int type,
960 uint32_t intrbits, ioc4_intr_func_f * intr, void *info)
961{
962 int i;
963 struct ioc4_intr_info *intr_ptr;
964
965 BUG_ON(!((type == IOC4_SIO_INTR_TYPE)
966 || (type == IOC4_OTHER_INTR_TYPE)));
967
968 i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1;
969 BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0)));
970
971 /* Save off the lower level interrupt handler */
972 intr_ptr = &soft->is_intr_type[type].is_intr_info[i];
973 intr_ptr->sd_bits = intrbits;
974 intr_ptr->sd_intr = intr;
975 intr_ptr->sd_info = info;
976}
977
978/**
979 * ioc4_intr - Top level IOC4 interrupt handler.
980 * @irq: irq value
981 * @arg: handler arg
982 * @regs: registers
983 */
984static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs)
985{
986 struct ioc4_soft *soft;
987 uint32_t this_ir, this_mir;
988 int xx, num_intrs = 0;
989 int intr_type;
990 int handled = 0;
991 struct ioc4_intr_info *ii;
992
993 soft = arg;
994 for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) {
995 num_intrs = (int)atomic_read(
996 &soft->is_intr_type[intr_type].is_num_intrs);
997
998 this_mir = this_ir = pending_intrs(soft, intr_type);
999
1000 /* Farm out the interrupt to the various drivers depending on
1001 * which interrupt bits are set.
1002 */
1003 for (xx = 0; xx < num_intrs; xx++) {
1004 ii = &soft->is_intr_type[intr_type].is_intr_info[xx];
1005 if ((this_mir = this_ir & ii->sd_bits)) {
1006 /* Disable owned interrupts, call handler */
1007 handled++;
1008 write_ireg(soft, ii->sd_bits, IOC4_W_IEC,
1009 intr_type);
1010 ii->sd_intr(ii->sd_info, this_mir);
1011 this_ir &= ~this_mir;
1012 }
1013 }
1014 if (this_ir) {
1015 printk(KERN_ERR
1016 "unknown IOC4 %s interrupt 0x%x, sio_ir = 0x%x,"
1017 " sio_ies = 0x%x, other_ir = 0x%x :"
1018 "other_ies = 0x%x\n",
1019 (intr_type == IOC4_SIO_INTR_TYPE) ? "sio" :
1020 "other", this_ir,
1021 readl(&soft->is_ioc4_mem_addr->sio_ir),
1022 readl(&soft->is_ioc4_mem_addr->sio_ies_ro),
1023 readl(&soft->is_ioc4_mem_addr->other_ir),
1024 readl(&soft->is_ioc4_mem_addr->other_ies_ro));
1025 }
1026 }
1027#ifdef DEBUG_INTERRUPTS
1028 {
1029 struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr;
1030 spinlock_t *lp = &soft->is_ir_lock;
1031 unsigned long flag;
1032
1033 spin_lock_irqsave(&soft->is_ir_lock, flag);
1034 printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies_ro 0x%x "
1035 "other_ir 0x%x other_ies_ro 0x%x mask 0x%x\n",
1036 __FUNCTION__, __LINE__,
1037 (void *)mem, readl(&mem->sio_ir),
1038 readl(&mem->sio_ies_ro),
1039 readl(&mem->other_ir),
1040 readl(&mem->other_ies_ro),
1041 IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
1042 spin_unlock_irqrestore(&soft->is_ir_lock, flag);
1043 }
1044#endif
1045 return handled ? IRQ_HANDLED : IRQ_NONE;
1046}
1047
1048/**
1049 * ioc4_attach_local - Device initialization.
1050 * Called at *_attach() time for each
1051 * IOC4 with serial ports in the system.
1052 * @control: ioc4_control ptr
1053 * @pdev: PCI handle for this device
1054 * @soft: soft struct for this device
1055 * @ioc4: ioc4 mem space
1056 */
1057static int inline ioc4_attach_local(struct pci_dev *pdev,
1058 struct ioc4_control *control,
1059 struct ioc4_soft *soft, void __iomem *ioc4_mem,
1060 void __iomem *ioc4_serial)
1061{
1062 struct ioc4_port *port;
1063 struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS];
1064 int port_number;
1065 uint16_t ioc4_revid_min = 62;
1066 uint16_t ioc4_revid;
1067
1068 /* IOC4 firmware must be at least rev 62 */
1069 pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid);
1070
1071 printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid);
1072 if (ioc4_revid < ioc4_revid_min) {
1073 printk(KERN_WARNING
1074 "IOC4 serial not supported on firmware rev %d, "
1075 "please upgrade to rev %d or higher\n",
1076 ioc4_revid, ioc4_revid_min);
1077 return -EPERM;
1078 }
1079 BUG_ON(ioc4_mem == NULL);
1080 BUG_ON(ioc4_serial == NULL);
1081
1082 /* Create port structures for each port */
1083 for (port_number = 0; port_number < IOC4_NUM_SERIAL_PORTS;
1084 port_number++) {
1085 port = kmalloc(sizeof(struct ioc4_port), GFP_KERNEL);
1086 if (!port) {
1087 printk(KERN_WARNING
1088 "IOC4 serial memory not available for port\n");
1089 return -ENOMEM;
1090 }
1091 memset(port, 0, sizeof(struct ioc4_port));
1092
1093 /* we need to remember the previous ones, to point back to
1094 * them farther down - setting up the ring buffers.
1095 */
1096 ports[port_number] = port;
1097
1098 /* Allocate buffers and jumpstart the hardware. */
1099 control->ic_port[port_number].icp_port = port;
1100 port->ip_ioc4_soft = soft;
1101 port->ip_pdev = pdev;
1102 port->ip_ienb = 0;
1103 port->ip_pci_bus_speed = IOC4_SER_XIN_CLK;
1104 port->ip_baud = 9600;
1105 port->ip_control = control;
1106 port->ip_mem = ioc4_mem;
1107 port->ip_serial = ioc4_serial;
1108
1109 /* point to the right hook */
1110 port->ip_hooks = &hooks_array[port_number];
1111
1112 /* Get direct hooks to the serial regs and uart regs
1113 * for this port
1114 */
1115 switch (port_number) {
1116 case 0:
1117 port->ip_serial_regs = &(port->ip_serial->port_0);
1118 port->ip_uart_regs = &(port->ip_serial->uart_0);
1119 break;
1120 case 1:
1121 port->ip_serial_regs = &(port->ip_serial->port_1);
1122 port->ip_uart_regs = &(port->ip_serial->uart_1);
1123 break;
1124 case 2:
1125 port->ip_serial_regs = &(port->ip_serial->port_2);
1126 port->ip_uart_regs = &(port->ip_serial->uart_2);
1127 break;
1128 default:
1129 case 3:
1130 port->ip_serial_regs = &(port->ip_serial->port_3);
1131 port->ip_uart_regs = &(port->ip_serial->uart_3);
1132 break;
1133 }
1134
1135 /* ring buffers are 1 to a pair of ports */
1136 if (port_number && (port_number & 1)) {
1137 /* odd use the evens buffer */
1138 port->ip_dma_ringbuf =
1139 ports[port_number - 1]->ip_dma_ringbuf;
1140 port->ip_cpu_ringbuf =
1141 ports[port_number - 1]->ip_cpu_ringbuf;
1142 port->ip_inring = RING(port, RX_1_OR_3);
1143 port->ip_outring = RING(port, TX_1_OR_3);
1144
1145 } else {
1146 if (port->ip_dma_ringbuf == 0) {
1147 port->ip_cpu_ringbuf = pci_alloc_consistent
1148 (pdev, TOTAL_RING_BUF_SIZE,
1149 &port->ip_dma_ringbuf);
1150
1151 }
1152 BUG_ON(!((((int64_t)port->ip_dma_ringbuf) &
1153 (TOTAL_RING_BUF_SIZE - 1)) == 0));
1154 DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p "
1155 "ip_dma_ringbuf 0x%p\n",
1156 __FUNCTION__,
1157 (void *)port->ip_cpu_ringbuf,
1158 (void *)port->ip_dma_ringbuf));
1159 port->ip_inring = RING(port, RX_0_OR_2);
1160 port->ip_outring = RING(port, TX_0_OR_2);
1161 }
1162 DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p",
1163 __FUNCTION__,
1164 port_number, (void *)port, (void *)control));
1165 DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n",
1166 (void *)port->ip_serial_regs,
1167 (void *)port->ip_uart_regs));
1168
1169 /* Initialize the hardware for IOC4 */
1170 port_init(port);
1171
1172 DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p "
1173 "outring 0x%p\n",
1174 __FUNCTION__,
1175 port_number, (void *)port,
1176 (void *)port->ip_inring,
1177 (void *)port->ip_outring));
1178
1179 /* Attach interrupt handlers */
1180 intr_connect(soft, IOC4_SIO_INTR_TYPE,
1181 GET_SIO_IR(port_number),
1182 handle_intr, port);
1183
1184 intr_connect(soft, IOC4_OTHER_INTR_TYPE,
1185 GET_OTHER_IR(port_number),
1186 handle_dma_error_intr, port);
1187 }
1188 return 0;
1189}
1190
1191/**
1192 * enable_intrs - enable interrupts
1193 * @port: port to enable
1194 * @mask: mask to use
1195 */
1196static void enable_intrs(struct ioc4_port *port, uint32_t mask)
1197{
1198 struct hooks *hooks = port->ip_hooks;
1199
1200 if ((port->ip_ienb & mask) != mask) {
1201 write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IES,
1202 IOC4_SIO_INTR_TYPE);
1203 port->ip_ienb |= mask;
1204 }
1205
1206 if (port->ip_ienb)
1207 write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error,
1208 IOC4_W_IES, IOC4_OTHER_INTR_TYPE);
1209}
1210
1211/**
1212 * local_open - local open a port
1213 * @port: port to open
1214 */
1215static inline int local_open(struct ioc4_port *port)
1216{
1217 int spiniter = 0;
1218
1219 port->ip_flags = 0;
1220
1221 /* Pause the DMA interface if necessary */
1222 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1223 writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
1224 &port->ip_serial_regs->sscr);
1225 while((readl(&port->ip_serial_regs-> sscr)
1226 & IOC4_SSCR_PAUSE_STATE) == 0) {
1227 spiniter++;
1228 if (spiniter > MAXITER) {
1229 return -1;
1230 }
1231 }
1232 }
1233
1234 /* Reset the input fifo. If the uart received chars while the port
1235 * was closed and DMA is not enabled, the uart may have a bunch of
1236 * chars hanging around in its rx fifo which will not be discarded
1237 * by rclr in the upper layer. We must get rid of them here.
1238 */
1239 writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR,
1240 &port->ip_uart_regs->i4u_fcr);
1241
1242 writeb(UART_LCR_WLEN8, &port->ip_uart_regs->i4u_lcr);
1243 /* UART_LCR_STOP == 1 stop */
1244
1245 /* Re-enable DMA, set default threshold to intr whenever there is
1246 * data available.
1247 */
1248 port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD;
1249 port->ip_sscr |= 1; /* default threshold */
1250
1251 /* Plug in the new sscr. This implicitly clears the DMA_PAUSE
1252 * flag if it was set above
1253 */
1254 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1255 port->ip_tx_lowat = 1;
1256 return 0;
1257}
1258
1259/**
1260 * set_rx_timeout - Set rx timeout and threshold values.
1261 * @port: port to use
1262 * @timeout: timeout value in ticks
1263 */
1264static inline int set_rx_timeout(struct ioc4_port *port, int timeout)
1265{
1266 int threshold;
1267
1268 port->ip_rx_timeout = timeout;
1269
1270 /* Timeout is in ticks. Let's figure out how many chars we
1271 * can receive at the current baud rate in that interval
1272 * and set the rx threshold to that amount. There are 4 chars
1273 * per ring entry, so we'll divide the number of chars that will
1274 * arrive in timeout by 4.
1275 */
1276 threshold = timeout * port->ip_baud / 10 / HZ / 4;
1277 if (threshold == 0)
1278 threshold = 1; /* otherwise we'll intr all the time! */
1279
1280 if ((unsigned)threshold > (unsigned)IOC4_SSCR_RX_THRESHOLD)
1281 return 1;
1282
1283 port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD;
1284 port->ip_sscr |= threshold;
1285
1286 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1287
1288 /* Now set the rx timeout to the given value */
1289 timeout = timeout * IOC4_SRTR_HZ / HZ;
1290 if (timeout > IOC4_SRTR_CNT)
1291 timeout = IOC4_SRTR_CNT;
1292
1293 writel(timeout, &port->ip_serial_regs->srtr);
1294 return 0;
1295}
1296
1297/**
1298 * config_port - config the hardware
1299 * @port: port to config
1300 * @baud: baud rate for the port
1301 * @byte_size: data size
1302 * @stop_bits: number of stop bits
1303 * @parenb: parity enable ?
1304 * @parodd: odd parity ?
1305 */
1306static inline int
1307config_port(struct ioc4_port *port,
1308 int baud, int byte_size, int stop_bits, int parenb, int parodd)
1309{
1310 char lcr, sizebits;
1311 int spiniter = 0;
1312
1313 DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n",
1314 __FUNCTION__, baud, byte_size, stop_bits, parenb, parodd));
1315
1316 if (set_baud(port, baud))
1317 return 1;
1318
1319 switch (byte_size) {
1320 case 5:
1321 sizebits = UART_LCR_WLEN5;
1322 break;
1323 case 6:
1324 sizebits = UART_LCR_WLEN6;
1325 break;
1326 case 7:
1327 sizebits = UART_LCR_WLEN7;
1328 break;
1329 case 8:
1330 sizebits = UART_LCR_WLEN8;
1331 break;
1332 default:
1333 return 1;
1334 }
1335
1336 /* Pause the DMA interface if necessary */
1337 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1338 writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
1339 &port->ip_serial_regs->sscr);
1340 while((readl(&port->ip_serial_regs->sscr)
1341 & IOC4_SSCR_PAUSE_STATE) == 0) {
1342 spiniter++;
1343 if (spiniter > MAXITER)
1344 return -1;
1345 }
1346 }
1347
1348 /* Clear relevant fields in lcr */
1349 lcr = readb(&port->ip_uart_regs->i4u_lcr);
1350 lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR |
1351 UART_LCR_PARITY | LCR_MASK_STOP_BITS);
1352
1353 /* Set byte size in lcr */
1354 lcr |= sizebits;
1355
1356 /* Set parity */
1357 if (parenb) {
1358 lcr |= UART_LCR_PARITY;
1359 if (!parodd)
1360 lcr |= UART_LCR_EPAR;
1361 }
1362
1363 /* Set stop bits */
1364 if (stop_bits)
1365 lcr |= UART_LCR_STOP /* 2 stop bits */ ;
1366
1367 writeb(lcr, &port->ip_uart_regs->i4u_lcr);
1368
1369 /* Re-enable the DMA interface if necessary */
1370 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1371 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1372 }
1373 port->ip_baud = baud;
1374
1375 /* When we get within this number of ring entries of filling the
1376 * entire ring on tx, place an EXPLICIT intr to generate a lowat
1377 * notification when output has drained.
1378 */
1379 port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4;
1380 if (port->ip_tx_lowat == 0)
1381 port->ip_tx_lowat = 1;
1382
1383 set_rx_timeout(port, port->ip_rx_timeout);
1384
1385 return 0;
1386}
1387
1388/**
1389 * do_write - Write bytes to the port. Returns the number of bytes
1390 * actually written. Called from transmit_chars
1391 * @port: port to use
1392 * @buf: the stuff to write
1393 * @len: how many bytes in 'buf'
1394 */
1395static inline int do_write(struct ioc4_port *port, char *buf, int len)
1396{
1397 int prod_ptr, cons_ptr, total = 0;
1398 struct ring *outring;
1399 struct ring_entry *entry;
1400 struct hooks *hooks = port->ip_hooks;
1401
1402 BUG_ON(!(len >= 0));
1403
1404 prod_ptr = port->ip_tx_prod;
1405 cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
1406 outring = port->ip_outring;
1407
1408 /* Maintain a 1-entry red-zone. The ring buffer is full when
1409 * (cons - prod) % ring_size is 1. Rather than do this subtraction
1410 * in the body of the loop, I'll do it now.
1411 */
1412 cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK;
1413
1414 /* Stuff the bytes into the output */
1415 while ((prod_ptr != cons_ptr) && (len > 0)) {
1416 int xx;
1417
1418 /* Get 4 bytes (one ring entry) at a time */
1419 entry = (struct ring_entry *)((caddr_t) outring + prod_ptr);
1420
1421 /* Invalidate all entries */
1422 entry->ring_allsc = 0;
1423
1424 /* Copy in some bytes */
1425 for (xx = 0; (xx < 4) && (len > 0); xx++) {
1426 entry->ring_data[xx] = *buf++;
1427 entry->ring_sc[xx] = IOC4_TXCB_VALID;
1428 len--;
1429 total++;
1430 }
1431
1432 /* If we are within some small threshold of filling up the
1433 * entire ring buffer, we must place an EXPLICIT intr here
1434 * to generate a lowat interrupt in case we subsequently
1435 * really do fill up the ring and the caller goes to sleep.
1436 * No need to place more than one though.
1437 */
1438 if (!(port->ip_flags & LOWAT_WRITTEN) &&
1439 ((cons_ptr - prod_ptr) & PROD_CONS_MASK)
1440 <= port->ip_tx_lowat
1441 * (int)sizeof(struct ring_entry)) {
1442 port->ip_flags |= LOWAT_WRITTEN;
1443 entry->ring_sc[0] |= IOC4_TXCB_INT_WHEN_DONE;
1444 }
1445
1446 /* Go on to next entry */
1447 prod_ptr += sizeof(struct ring_entry);
1448 prod_ptr &= PROD_CONS_MASK;
1449 }
1450
1451 /* If we sent something, start DMA if necessary */
1452 if (total > 0 && !(port->ip_sscr & IOC4_SSCR_DMA_EN)) {
1453 port->ip_sscr |= IOC4_SSCR_DMA_EN;
1454 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1455 }
1456
1457 /* Store the new producer pointer. If tx is disabled, we stuff the
1458 * data into the ring buffer, but we don't actually start tx.
1459 */
1460 if (!uart_tx_stopped(port->ip_port)) {
1461 writel(prod_ptr, &port->ip_serial_regs->stpir);
1462
1463 /* If we are now transmitting, enable tx_mt interrupt so we
1464 * can disable DMA if necessary when the tx finishes.
1465 */
1466 if (total > 0)
1467 enable_intrs(port, hooks->intr_tx_mt);
1468 }
1469 port->ip_tx_prod = prod_ptr;
1470 return total;
1471}
1472
1473/**
1474 * disable_intrs - disable interrupts
1475 * @port: port to enable
1476 * @mask: mask to use
1477 */
1478static void disable_intrs(struct ioc4_port *port, uint32_t mask)
1479{
1480 struct hooks *hooks = port->ip_hooks;
1481
1482 if (port->ip_ienb & mask) {
1483 write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IEC,
1484 IOC4_SIO_INTR_TYPE);
1485 port->ip_ienb &= ~mask;
1486 }
1487
1488 if (!port->ip_ienb)
1489 write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error,
1490 IOC4_W_IEC, IOC4_OTHER_INTR_TYPE);
1491}
1492
1493/**
1494 * set_notification - Modify event notification
1495 * @port: port to use
1496 * @mask: events mask
1497 * @set_on: set ?
1498 */
1499static int set_notification(struct ioc4_port *port, int mask, int set_on)
1500{
1501 struct hooks *hooks = port->ip_hooks;
1502 uint32_t intrbits, sscrbits;
1503
1504 BUG_ON(!mask);
1505
1506 intrbits = sscrbits = 0;
1507
1508 if (mask & N_DATA_READY)
1509 intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high);
1510 if (mask & N_OUTPUT_LOWAT)
1511 intrbits |= hooks->intr_tx_explicit;
1512 if (mask & N_DDCD) {
1513 intrbits |= hooks->intr_delta_dcd;
1514 sscrbits |= IOC4_SSCR_RX_RING_DCD;
1515 }
1516 if (mask & N_DCTS)
1517 intrbits |= hooks->intr_delta_cts;
1518
1519 if (set_on) {
1520 enable_intrs(port, intrbits);
1521 port->ip_notify |= mask;
1522 port->ip_sscr |= sscrbits;
1523 } else {
1524 disable_intrs(port, intrbits);
1525 port->ip_notify &= ~mask;
1526 port->ip_sscr &= ~sscrbits;
1527 }
1528
1529 /* We require DMA if either DATA_READY or DDCD notification is
1530 * currently requested. If neither of these is requested and
1531 * there is currently no tx in progress, DMA may be disabled.
1532 */
1533 if (port->ip_notify & (N_DATA_READY | N_DDCD))
1534 port->ip_sscr |= IOC4_SSCR_DMA_EN;
1535 else if (!(port->ip_ienb & hooks->intr_tx_mt))
1536 port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
1537
1538 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1539 return 0;
1540}
1541
1542/**
1543 * set_mcr - set the master control reg
1544 * @the_port: port to use
1545 * @set: set ?
1546 * @mask1: mcr mask
1547 * @mask2: shadow mask
1548 */
1549static inline int set_mcr(struct uart_port *the_port, int set,
1550 int mask1, int mask2)
1551{
1552 struct ioc4_port *port = get_ioc4_port(the_port);
1553 uint32_t shadow;
1554 int spiniter = 0;
1555 char mcr;
1556
1557 if (!port)
1558 return -1;
1559
1560 /* Pause the DMA interface if necessary */
1561 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1562 writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
1563 &port->ip_serial_regs->sscr);
1564 while ((readl(&port->ip_serial_regs->sscr)
1565 & IOC4_SSCR_PAUSE_STATE) == 0) {
1566 spiniter++;
1567 if (spiniter > MAXITER)
1568 return -1;
1569 }
1570 }
1571 shadow = readl(&port->ip_serial_regs->shadow);
1572 mcr = (shadow & 0xff000000) >> 24;
1573
1574 /* Set new value */
1575 if (set) {
1576 mcr |= mask1;
1577 shadow |= mask2;
1578 } else {
1579 mcr &= ~mask1;
1580 shadow &= ~mask2;
1581 }
1582 writeb(mcr, &port->ip_uart_regs->i4u_mcr);
1583 writel(shadow, &port->ip_serial_regs->shadow);
1584
1585 /* Re-enable the DMA interface if necessary */
1586 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1587 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1588 }
1589 return 0;
1590}
1591
1592/**
1593 * ioc4_set_proto - set the protocol for the port
1594 * @port: port to use
1595 * @proto: protocol to use
1596 */
1597static int ioc4_set_proto(struct ioc4_port *port, enum sio_proto proto)
1598{
1599 struct hooks *hooks = port->ip_hooks;
1600
1601 switch (proto) {
1602 case PROTO_RS232:
1603 /* Clear the appropriate GIO pin */
1604 writel(0, (&port->ip_mem->gppr_0 +
1605 hooks->rs422_select_pin));
1606 break;
1607
1608 case PROTO_RS422:
1609 /* Set the appropriate GIO pin */
1610 writel(1, (&port->ip_mem->gppr_0 +
1611 hooks->rs422_select_pin));
1612 break;
1613
1614 default:
1615 return 1;
1616 }
1617 return 0;
1618}
1619
1620/**
1621 * transmit_chars - upper level write, called with ip_lock
1622 * @the_port: port to write
1623 */
1624static void transmit_chars(struct uart_port *the_port)
1625{
1626 int xmit_count, tail, head;
1627 int result;
1628 char *start;
1629 struct tty_struct *tty;
1630 struct ioc4_port *port = get_ioc4_port(the_port);
1631 struct uart_info *info;
1632
1633 if (!the_port)
1634 return;
1635 if (!port)
1636 return;
1637
1638 info = the_port->info;
1639 tty = info->tty;
1640
1641 if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
1642 /* Nothing to do or hw stopped */
1643 set_notification(port, N_ALL_OUTPUT, 0);
1644 return;
1645 }
1646
1647 head = info->xmit.head;
1648 tail = info->xmit.tail;
1649 start = (char *)&info->xmit.buf[tail];
1650
1651 /* write out all the data or until the end of the buffer */
1652 xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
1653 if (xmit_count > 0) {
1654 result = do_write(port, start, xmit_count);
1655 if (result > 0) {
1656 /* booking */
1657 xmit_count -= result;
1658 the_port->icount.tx += result;
1659 /* advance the pointers */
1660 tail += result;
1661 tail &= UART_XMIT_SIZE - 1;
1662 info->xmit.tail = tail;
1663 start = (char *)&info->xmit.buf[tail];
1664 }
1665 }
1666 if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS)
1667 uart_write_wakeup(the_port);
1668
1669 if (uart_circ_empty(&info->xmit)) {
1670 set_notification(port, N_OUTPUT_LOWAT, 0);
1671 } else {
1672 set_notification(port, N_OUTPUT_LOWAT, 1);
1673 }
1674}
1675
1676/**
1677 * ioc4_change_speed - change the speed of the port
1678 * @the_port: port to change
1679 * @new_termios: new termios settings
1680 * @old_termios: old termios settings
1681 */
1682static void
1683ioc4_change_speed(struct uart_port *the_port,
1684 struct termios *new_termios, struct termios *old_termios)
1685{
1686 struct ioc4_port *port = get_ioc4_port(the_port);
1687 int baud, bits;
1688 unsigned cflag, cval;
1689 int new_parity = 0, new_parity_enable = 0, new_stop = 1, new_data = 8;
1690 struct uart_info *info = the_port->info;
1691
1692 cflag = new_termios->c_cflag;
1693
1694 switch (cflag & CSIZE) {
1695 case CS5:
1696 new_data = 5;
1697 cval = 0x00;
1698 bits = 7;
1699 break;
1700 case CS6:
1701 new_data = 6;
1702 cval = 0x01;
1703 bits = 8;
1704 break;
1705 case CS7:
1706 new_data = 7;
1707 cval = 0x02;
1708 bits = 9;
1709 break;
1710 case CS8:
1711 new_data = 8;
1712 cval = 0x03;
1713 bits = 10;
1714 break;
1715 default:
1716 /* cuz we always need a default ... */
1717 new_data = 5;
1718 cval = 0x00;
1719 bits = 7;
1720 break;
1721 }
1722 if (cflag & CSTOPB) {
1723 cval |= 0x04;
1724 bits++;
1725 new_stop = 1;
1726 }
1727 if (cflag & PARENB) {
1728 cval |= UART_LCR_PARITY;
1729 bits++;
1730 new_parity_enable = 1;
1731 }
1732 if (cflag & PARODD) {
1733 cval |= UART_LCR_EPAR;
1734 new_parity = 1;
1735 }
1736 if (cflag & IGNPAR) {
1737 cval &= ~UART_LCR_PARITY;
1738 new_parity_enable = 0;
1739 }
1740 baud = uart_get_baud_rate(the_port, new_termios, old_termios,
1741 MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED);
1742 DPRINT_CONFIG(("%s: returned baud %d\n", __FUNCTION__, baud));
1743
1744 /* default is 9600 */
1745 if (!baud)
1746 baud = 9600;
1747
1748 if (!the_port->fifosize)
1749 the_port->fifosize = IOC4_MAX_CHARS;
1750 the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10));
1751 the_port->timeout += HZ / 50; /* Add .02 seconds of slop */
1752
1753 the_port->ignore_status_mask = N_ALL_INPUT;
1754
1755 if (I_IGNPAR(info->tty))
1756 the_port->ignore_status_mask &= ~(N_PARITY_ERROR
1757 | N_FRAMING_ERROR);
1758 if (I_IGNBRK(info->tty)) {
1759 the_port->ignore_status_mask &= ~N_BREAK;
1760 if (I_IGNPAR(info->tty))
1761 the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
1762 }
1763 if (!(cflag & CREAD)) {
1764 /* ignore everything */
1765 the_port->ignore_status_mask &= ~N_DATA_READY;
1766 }
1767
149733d4 1768 if (cflag & CRTSCTS) {
1da177e4 1769 info->flags |= ASYNC_CTS_FLOW;
149733d4
PG		 1770 port->ip_sscr |= IOC4_SSCR_HFC_EN;
1771 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1772 }
1da177e4
LT		 1773 else
1774 info->flags &= ~ASYNC_CTS_FLOW;
1775
1776 /* Set the configuration and proper notification call */
1777 DPRINT_CONFIG(("%s : port 0x%p cflag 0%o "
1778 "config_port(baud %d data %d stop %d p enable %d parity %d),"
1779 " notification 0x%x\n",
1780 __FUNCTION__, (void *)port, cflag, baud, new_data, new_stop,
1781 new_parity_enable, new_parity, the_port->ignore_status_mask));
1782
1783 if ((config_port(port, baud, /* baud */
1784 new_data, /* byte size */
1785 new_stop, /* stop bits */
1786 new_parity_enable, /* set parity */
1787 new_parity)) >= 0) { /* parity 1==odd */
1788 set_notification(port, the_port->ignore_status_mask, 1);
1789 }
1790}
1791
1792/**
1793 * ic4_startup_local - Start up the serial port - returns >= 0 if no errors
1794 * @the_port: Port to operate on
1795 */
1796static inline int ic4_startup_local(struct uart_port *the_port)
1797{
1798 int retval = 0;
1799 struct ioc4_port *port;
1800 struct uart_info *info;
1801
1802 if (!the_port)
1803 return -1;
1804
1805 port = get_ioc4_port(the_port);
1806 if (!port)
1807 return -1;
1808
1809 info = the_port->info;
1810 if (info->flags & UIF_INITIALIZED) {
1811 return retval;
1812 }
1813
1814 if (info->tty) {
1815 set_bit(TTY_IO_ERROR, &info->tty->flags);
1816 clear_bit(TTY_IO_ERROR, &info->tty->flags);
1817 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
1818 info->tty->alt_speed = 57600;
1819 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
1820 info->tty->alt_speed = 115200;
1821 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
1822 info->tty->alt_speed = 230400;
1823 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
1824 info->tty->alt_speed = 460800;
1825 }
1826 local_open(port);
1827
1828 /* set the speed of the serial port */
1829 ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0);
1830
1da177e4
LT		 1831 info->flags |= UIF_INITIALIZED;
1832 return 0;
1833}
1834
1835/*
1836 * ioc4_cb_output_lowat - called when the output low water mark is hit
1837 * @port: port to output
1838 */
1839static void ioc4_cb_output_lowat(struct ioc4_port *port)
1840{
1841 /* ip_lock is set on the call here */
1842 if (port->ip_port) {
1843 transmit_chars(port->ip_port);
1844 }
1845}
1846
1847
1848/**
1849 * handle_intr - service any interrupts for the given port - 2nd level
1850 * called via sd_intr
1851 * @arg: handler arg
1852 * @sio_ir: ioc4regs
1853 */
1854static void handle_intr(void *arg, uint32_t sio_ir)
1855{
1856 struct ioc4_port *port = (struct ioc4_port *)arg;
1857 struct hooks *hooks = port->ip_hooks;
1858 unsigned int rx_high_rd_aborted = 0;
1859 unsigned int flags;
1860 struct uart_port *the_port;
1861 int loop_counter;
1862
1863 /* Possible race condition here: The tx_mt interrupt bit may be
1864 * cleared without the intervention of the interrupt handler,
1865 * e.g. by a write. If the top level interrupt handler reads a
1866 * tx_mt, then some other processor does a write, starting up
1867 * output, then we come in here, see the tx_mt and stop DMA, the
1868 * output started by the other processor will hang. Thus we can
1869 * only rely on tx_mt being legitimate if it is read while the
1870 * port lock is held. Therefore this bit must be ignored in the
1871 * passed in interrupt mask which was read by the top level
1872 * interrupt handler since the port lock was not held at the time
1873 * it was read. We can only rely on this bit being accurate if it
1874 * is read while the port lock is held. So we'll clear it for now,
1875 * and reload it later once we have the port lock.
1876 */
1877 sio_ir &= ~(hooks->intr_tx_mt);
1878
1879 spin_lock_irqsave(&port->ip_lock, flags);
1880
1881 loop_counter = MAXITER; /* to avoid hangs */
1882
1883 do {
1884 uint32_t shadow;
1885
1886 if ( loop_counter-- <= 0 ) {
1887 printk(KERN_WARNING "IOC4 serial: "
1888 "possible hang condition/"
1889 "port stuck on interrupt.\n");
1890 break;
1891 }
1892
1893 /* Handle a DCD change */
1894 if (sio_ir & hooks->intr_delta_dcd) {
1895 /* ACK the interrupt */
1896 writel(hooks->intr_delta_dcd,
1897 &port->ip_mem->sio_ir);
1898
1899 shadow = readl(&port->ip_serial_regs->shadow);
1900
1901 if ((port->ip_notify & N_DDCD)
1902 && (shadow & IOC4_SHADOW_DCD)
1903 && (port->ip_port)) {
1904 the_port = port->ip_port;
1905 the_port->icount.dcd = 1;
1906 wake_up_interruptible
1907 (&the_port-> info->delta_msr_wait);
1908 } else if ((port->ip_notify & N_DDCD)
1909 && !(shadow & IOC4_SHADOW_DCD)) {
1910 /* Flag delta DCD/no DCD */
1911 port->ip_flags |= DCD_ON;
1912 }
1913 }
1914
1915 /* Handle a CTS change */
1916 if (sio_ir & hooks->intr_delta_cts) {
1917 /* ACK the interrupt */
1918 writel(hooks->intr_delta_cts,
1919 &port->ip_mem->sio_ir);
1920
1921 shadow = readl(&port->ip_serial_regs->shadow);
1922
1923 if ((port->ip_notify & N_DCTS)
1924 && (port->ip_port)) {
1925 the_port = port->ip_port;
1926 the_port->icount.cts =
1927 (shadow & IOC4_SHADOW_CTS) ? 1 : 0;
1928 wake_up_interruptible
1929 (&the_port->info->delta_msr_wait);
1930 }
1931 }
1932
1933 /* rx timeout interrupt. Must be some data available. Put this
1934 * before the check for rx_high since servicing this condition
1935 * may cause that condition to clear.
1936 */
1937 if (sio_ir & hooks->intr_rx_timer) {
1938 /* ACK the interrupt */
1939 writel(hooks->intr_rx_timer,
1940 &port->ip_mem->sio_ir);
1941
1942 if ((port->ip_notify & N_DATA_READY)
1943 && (port->ip_port)) {
1944 /* ip_lock is set on call here */
1945 receive_chars(port->ip_port);
1946 }
1947 }
1948
1949 /* rx high interrupt. Must be after rx_timer. */
1950 else if (sio_ir & hooks->intr_rx_high) {
1951 /* Data available, notify upper layer */
1952 if ((port->ip_notify & N_DATA_READY)
1953 && port->ip_port) {
1954 /* ip_lock is set on call here */
1955 receive_chars(port->ip_port);
1956 }
1957
1958 /* We can't ACK this interrupt. If receive_chars didn't
1959 * cause the condition to clear, we'll have to disable
1960 * the interrupt until the data is drained.
1961 * If the read was aborted, don't disable the interrupt
1962 * as this may cause us to hang indefinitely. An
1963 * aborted read generally means that this interrupt
1964 * hasn't been delivered to the cpu yet anyway, even
1965 * though we see it as asserted when we read the sio_ir.
1966 */
1967 if ((sio_ir = PENDING(port)) & hooks->intr_rx_high) {
1968 if ((port->ip_flags & READ_ABORTED) == 0) {
1969 port->ip_ienb &= ~hooks->intr_rx_high;
1970 port->ip_flags |= INPUT_HIGH;
1971 } else {
1972 rx_high_rd_aborted++;
1973 }
1974 }
1975 }
1976
1977 /* We got a low water interrupt: notify upper layer to
1978 * send more data. Must come before tx_mt since servicing
1979 * this condition may cause that condition to clear.
1980 */
1981 if (sio_ir & hooks->intr_tx_explicit) {
1982 port->ip_flags &= ~LOWAT_WRITTEN;
1983
1984 /* ACK the interrupt */
1985 writel(hooks->intr_tx_explicit,
1986 &port->ip_mem->sio_ir);
1987
1988 if (port->ip_notify & N_OUTPUT_LOWAT)
1989 ioc4_cb_output_lowat(port);
1990 }
1991
1992 /* Handle tx_mt. Must come after tx_explicit. */
1993 else if (sio_ir & hooks->intr_tx_mt) {
1994 /* If we are expecting a lowat notification
1995 * and we get to this point it probably means that for
1996 * some reason the tx_explicit didn't work as expected
1997 * (that can legitimately happen if the output buffer is
1998 * filled up in just the right way).
1999 * So send the notification now.
2000 */
2001 if (port->ip_notify & N_OUTPUT_LOWAT) {
2002 ioc4_cb_output_lowat(port);
2003
2004 /* We need to reload the sio_ir since the lowat
2005 * call may have caused another write to occur,
2006 * clearing the tx_mt condition.
2007 */
2008 sio_ir = PENDING(port);
2009 }
2010
2011 /* If the tx_mt condition still persists even after the
2012 * lowat call, we've got some work to do.
2013 */
2014 if (sio_ir & hooks->intr_tx_mt) {
2015
2016 /* If we are not currently expecting DMA input,
2017 * and the transmitter has just gone idle,
2018 * there is no longer any reason for DMA, so
2019 * disable it.
2020 */
2021 if (!(port->ip_notify
2022 & (N_DATA_READY | N_DDCD))) {
2023 BUG_ON(!(port->ip_sscr
2024 & IOC4_SSCR_DMA_EN));
2025 port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
2026 writel(port->ip_sscr,
2027 &port->ip_serial_regs->sscr);
2028 }
2029
2030 /* Prevent infinite tx_mt interrupt */
2031 port->ip_ienb &= ~hooks->intr_tx_mt;
2032 }
2033 }
2034 sio_ir = PENDING(port);
2035
2036 /* if the read was aborted and only hooks->intr_rx_high,
2037 * clear hooks->intr_rx_high, so we do not loop forever.
2038 */
2039
2040 if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) {
2041 sio_ir &= ~hooks->intr_rx_high;
2042 }
2043 } while (sio_ir & hooks->intr_all);
2044
2045 spin_unlock_irqrestore(&port->ip_lock, flags);
2046
2047 /* Re-enable interrupts before returning from interrupt handler.
2048 * Getting interrupted here is okay. It'll just v() our semaphore, and
2049 * we'll come through the loop again.
2050 */
2051
2052 write_ireg(port->ip_ioc4_soft, port->ip_ienb, IOC4_W_IES,
2053 IOC4_SIO_INTR_TYPE);
2054}
2055
2056/*
2057 * ioc4_cb_post_ncs - called for some basic errors
2058 * @port: port to use
2059 * @ncs: event
2060 */
2061static void ioc4_cb_post_ncs(struct uart_port *the_port, int ncs)
2062{
2063 struct uart_icount *icount;
2064
2065 icount = &the_port->icount;
2066
2067 if (ncs & NCS_BREAK)
2068 icount->brk++;
2069 if (ncs & NCS_FRAMING)
2070 icount->frame++;
2071 if (ncs & NCS_OVERRUN)
2072 icount->overrun++;
2073 if (ncs & NCS_PARITY)
2074 icount->parity++;
2075}
2076
2077/**
2078 * do_read - Read in bytes from the port. Return the number of bytes
2079 * actually read.
2080 * @the_port: port to use
2081 * @buf: place to put the stuff we read
2082 * @len: how big 'buf' is
2083 */
2084
2085static inline int do_read(struct uart_port *the_port, unsigned char *buf,
2086 int len)
2087{
2088 int prod_ptr, cons_ptr, total;
2089 struct ioc4_port *port = get_ioc4_port(the_port);
2090 struct ring *inring;
2091 struct ring_entry *entry;
2092 struct hooks *hooks = port->ip_hooks;
2093 int byte_num;
2094 char *sc;
2095 int loop_counter;
2096
2097 BUG_ON(!(len >= 0));
2098 BUG_ON(!port);
2099
2100 /* There is a nasty timing issue in the IOC4. When the rx_timer
2101 * expires or the rx_high condition arises, we take an interrupt.
2102 * At some point while servicing the interrupt, we read bytes from
2103 * the ring buffer and re-arm the rx_timer. However the rx_timer is
2104 * not started until the first byte is received *after* it is armed,
2105 * and any bytes pending in the rx construction buffers are not drained
2106 * to memory until either there are 4 bytes available or the rx_timer
2107 * expires. This leads to a potential situation where data is left
2108 * in the construction buffers forever - 1 to 3 bytes were received
2109 * after the interrupt was generated but before the rx_timer was
2110 * re-armed. At that point as long as no subsequent bytes are received
2111 * the timer will never be started and the bytes will remain in the
2112 * construction buffer forever. The solution is to execute a DRAIN
2113 * command after rearming the timer. This way any bytes received before
2114 * the DRAIN will be drained to memory, and any bytes received after
2115 * the DRAIN will start the TIMER and be drained when it expires.
2116 * Luckily, this only needs to be done when the DMA buffer is empty
2117 * since there is no requirement that this function return all
2118 * available data as long as it returns some.
2119 */
2120 /* Re-arm the timer */
2121 writel(port->ip_rx_cons | IOC4_SRCIR_ARM,
2122 &port->ip_serial_regs->srcir);
2123
2124 prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
2125 cons_ptr = port->ip_rx_cons;
2126
2127 if (prod_ptr == cons_ptr) {
2128 int reset_dma = 0;
2129
2130 /* Input buffer appears empty, do a flush. */
2131
2132 /* DMA must be enabled for this to work. */
2133 if (!(port->ip_sscr & IOC4_SSCR_DMA_EN)) {
2134 port->ip_sscr |= IOC4_SSCR_DMA_EN;
2135 reset_dma = 1;
2136 }
2137
2138 /* Potential race condition: we must reload the srpir after
2139 * issuing the drain command, otherwise we could think the rx
2140 * buffer is empty, then take a very long interrupt, and when
2141 * we come back it's full and we wait forever for the drain to
2142 * complete.
2143 */
2144 writel(port->ip_sscr | IOC4_SSCR_RX_DRAIN,
2145 &port->ip_serial_regs->sscr);
2146 prod_ptr = readl(&port->ip_serial_regs->srpir)
2147 & PROD_CONS_MASK;
2148
2149 /* We must not wait for the DRAIN to complete unless there are
2150 * at least 8 bytes (2 ring entries) available to receive the
2151 * data otherwise the DRAIN will never complete and we'll
2152 * deadlock here.
2153 * In fact, to make things easier, I'll just ignore the flush if
2154 * there is any data at all now available.
2155 */
2156 if (prod_ptr == cons_ptr) {
2157 loop_counter = 0;
2158 while (readl(&port->ip_serial_regs->sscr) &
2159 IOC4_SSCR_RX_DRAIN) {
2160 loop_counter++;
2161 if (loop_counter > MAXITER)
2162 return -1;
2163 }
2164
2165 /* SIGH. We have to reload the prod_ptr *again* since
2166 * the drain may have caused it to change
2167 */
2168 prod_ptr = readl(&port->ip_serial_regs->srpir)
2169 & PROD_CONS_MASK;
2170 }
2171 if (reset_dma) {
2172 port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
2173 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
2174 }
2175 }
2176 inring = port->ip_inring;
2177 port->ip_flags &= ~READ_ABORTED;
2178
2179 total = 0;
2180 loop_counter = 0xfffff; /* to avoid hangs */
2181
2182 /* Grab bytes from the hardware */
2183 while ((prod_ptr != cons_ptr) && (len > 0)) {
2184 entry = (struct ring_entry *)((caddr_t)inring + cons_ptr);
2185
2186 if ( loop_counter-- <= 0 ) {
2187 printk(KERN_WARNING "IOC4 serial: "
2188 "possible hang condition/"
2189 "port stuck on read.\n");
2190 break;
2191 }
2192
2193 /* According to the producer pointer, this ring entry
2194 * must contain some data. But if the PIO happened faster
2195 * than the DMA, the data may not be available yet, so let's
2196 * wait until it arrives.
2197 */
2198 if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
2199 /* Indicate the read is aborted so we don't disable
2200 * the interrupt thinking that the consumer is
2201 * congested.
2202 */
2203 port->ip_flags |= READ_ABORTED;
2204 len = 0;
2205 break;
2206 }
2207
2208 /* Load the bytes/status out of the ring entry */
2209 for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) {
2210 sc = &(entry->ring_sc[byte_num]);
2211
2212 /* Check for change in modem state or overrun */
2213 if ((*sc & IOC4_RXSB_MODEM_VALID)
2214 && (port->ip_notify & N_DDCD)) {
2215 /* Notify upper layer if DCD dropped */
2216
2217 if ((port->ip_flags & DCD_ON)
2218 && !(*sc & IOC4_RXSB_DCD)) {
2219
2220 /* If we have already copied some data,
2221 * return it. We'll pick up the carrier
2222 * drop on the next pass. That way we
2223 * don't throw away the data that has
2224 * already been copied back to
2225 * the caller's buffer.
2226 */
2227 if (total > 0) {
2228 len = 0;
2229 break;
2230 }
2231 port->ip_flags &= ~DCD_ON;
2232
2233 /* Turn off this notification so the
2234 * carrier drop protocol won't see it
2235 * again when it does a read.
2236 */
2237 *sc &= ~IOC4_RXSB_MODEM_VALID;
2238
2239 /* To keep things consistent, we need
2240 * to update the consumer pointer so
2241 * the next reader won't come in and
2242 * try to read the same ring entries
2243 * again. This must be done here before
2244 * the dcd change.
2245 */
2246
2247 if ((entry->ring_allsc & RING_ANY_VALID)
2248 == 0) {
2249 cons_ptr += (int)sizeof
2250 (struct ring_entry);
2251 cons_ptr &= PROD_CONS_MASK;
2252 }
2253 writel(cons_ptr,
2254 &port->ip_serial_regs->srcir);
2255 port->ip_rx_cons = cons_ptr;
2256
2257 /* Notify upper layer of carrier drop */
2258 if ((port->ip_notify & N_DDCD)
2259 && port->ip_port) {
2260 the_port->icount.dcd = 0;
2261 wake_up_interruptible
2262 (&the_port->info->
2263 delta_msr_wait);
2264 }
2265
2266 /* If we had any data to return, we
2267 * would have returned it above.
2268 */
2269 return 0;
2270 }
2271 }
2272 if (*sc & IOC4_RXSB_MODEM_VALID) {
2273 /* Notify that an input overrun occurred */
2274 if ((*sc & IOC4_RXSB_OVERRUN)
2275 && (port->ip_notify & N_OVERRUN_ERROR)) {
2276 ioc4_cb_post_ncs(the_port, NCS_OVERRUN);
2277 }
2278 /* Don't look at this byte again */
2279 *sc &= ~IOC4_RXSB_MODEM_VALID;
2280 }
2281
2282 /* Check for valid data or RX errors */
2283 if ((*sc & IOC4_RXSB_DATA_VALID) &&
2284 ((*sc & (IOC4_RXSB_PAR_ERR
2285 | IOC4_RXSB_FRAME_ERR
2286 | IOC4_RXSB_BREAK))
2287 && (port->ip_notify & (N_PARITY_ERROR
2288 | N_FRAMING_ERROR
2289 | N_BREAK)))) {
2290 /* There is an error condition on the next byte.
2291 * If we have already transferred some bytes,
2292 * we'll stop here. Otherwise if this is the
2293 * first byte to be read, we'll just transfer
2294 * it alone after notifying the
2295 * upper layer of its status.
2296 */
2297 if (total > 0) {
2298 len = 0;
2299 break;
2300 } else {
2301 if ((*sc & IOC4_RXSB_PAR_ERR) &&
2302 (port->ip_notify & N_PARITY_ERROR)) {
2303 ioc4_cb_post_ncs(the_port,
2304 NCS_PARITY);
2305 }
2306 if ((*sc & IOC4_RXSB_FRAME_ERR) &&
2307 (port->ip_notify & N_FRAMING_ERROR)){
2308 ioc4_cb_post_ncs(the_port,
2309 NCS_FRAMING);
2310 }
2311 if ((*sc & IOC4_RXSB_BREAK)
2312 && (port->ip_notify & N_BREAK)) {
2313 ioc4_cb_post_ncs
2314 (the_port,
2315 NCS_BREAK);
2316 }
2317 len = 1;
2318 }
2319 }
2320 if (*sc & IOC4_RXSB_DATA_VALID) {
2321 *sc &= ~IOC4_RXSB_DATA_VALID;
2322 *buf = entry->ring_data[byte_num];
2323 buf++;
2324 len--;
2325 total++;
2326 }
2327 }
2328
2329 /* If we used up this entry entirely, go on to the next one,
2330 * otherwise we must have run out of buffer space, so
2331 * leave the consumer pointer here for the next read in case
2332 * there are still unread bytes in this entry.
2333 */
2334 if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
2335 cons_ptr += (int)sizeof(struct ring_entry);
2336 cons_ptr &= PROD_CONS_MASK;
2337 }
2338 }
2339
2340 /* Update consumer pointer and re-arm rx timer interrupt */
2341 writel(cons_ptr, &port->ip_serial_regs->srcir);
2342 port->ip_rx_cons = cons_ptr;
2343
2344 /* If we have now dipped below the rx high water mark and we have
2345 * rx_high interrupt turned off, we can now turn it back on again.
2346 */
2347 if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr)
2348 & PROD_CONS_MASK) < ((port->ip_sscr &
2349 IOC4_SSCR_RX_THRESHOLD)
2350 << IOC4_PROD_CONS_PTR_OFF))) {
2351 port->ip_flags &= ~INPUT_HIGH;
2352 enable_intrs(port, hooks->intr_rx_high);
2353 }
2354 return total;
2355}
2356/**
2357 * receive_chars - upper level read. Called with ip_lock.
2358 * @the_port: port to read from
2359 */
2360static void receive_chars(struct uart_port *the_port)
2361{
2362 struct tty_struct *tty;
2363 unsigned char ch[IOC4_MAX_CHARS];
2364 int read_count, request_count;
2365 struct uart_icount *icount;
2366 struct uart_info *info = the_port->info;
2367
2368 /* Make sure all the pointers are "good" ones */
2369 if (!info)
2370 return;
2371 if (!info->tty)
2372 return;
2373
2374 tty = info->tty;
2375
2376 request_count = TTY_FLIPBUF_SIZE - tty->flip.count - 1;
2377
2378 if (request_count > 0) {
2379 if (request_count > IOC4_MAX_CHARS - 2)
2380 request_count = IOC4_MAX_CHARS - 2;
2381 icount = &the_port->icount;
2382 read_count = do_read(the_port, ch, request_count);
2383 if (read_count > 0) {
2384 memcpy(tty->flip.char_buf_ptr, ch, read_count);
2385 memset(tty->flip.flag_buf_ptr, TTY_NORMAL, read_count);
2386 tty->flip.char_buf_ptr += read_count;
2387 tty->flip.flag_buf_ptr += read_count;
2388 tty->flip.count += read_count;
2389 icount->rx += read_count;
2390 }
2391 }
2392 tty_flip_buffer_push(tty);
2393}
2394
2395/**
2396 * ic4_type - What type of console are we?
2397 * @port: Port to operate with (we ignore since we only have one port)
2398 *
2399 */
2400static const char *ic4_type(struct uart_port *the_port)
2401{
2402 return "SGI IOC4 Serial";
2403}
2404
2405/**
2406 * ic4_tx_empty - Is the transmitter empty? We pretend we're always empty
2407 * @port: Port to operate on (we ignore since we always return 1)
2408 *
2409 */
2410static unsigned int ic4_tx_empty(struct uart_port *the_port)
2411{
2412 return 1;
2413}
2414
2415/**
2416 * ic4_stop_tx - stop the transmitter
2417 * @port: Port to operate on
2418 * @tty_stop: Set to 1 if called via uart_stop
2419 *
2420 */
2421static void ic4_stop_tx(struct uart_port *the_port, unsigned int tty_stop)
2422{
2423}
2424
2425/**
2426 * null_void_function -
2427 * @port: Port to operate on
2428 *
2429 */
2430static void null_void_function(struct uart_port *the_port)
2431{
2432}
2433
2434/**
2435 * ic4_shutdown - shut down the port - free irq and disable
2436 * @port: Port to shut down
2437 *
2438 */
2439static void ic4_shutdown(struct uart_port *the_port)
2440{
2441 unsigned long port_flags;
2442 struct ioc4_port *port;
2443 struct uart_info *info;
2444
2445 port = get_ioc4_port(the_port);
2446 if (!port)
2447 return;
2448
2449 info = the_port->info;
2450
2451 if (!(info->flags & UIF_INITIALIZED))
2452 return;
2453
2454 wake_up_interruptible(&info->delta_msr_wait);
2455
2456 if (info->tty)
2457 set_bit(TTY_IO_ERROR, &info->tty->flags);
2458
2459 spin_lock_irqsave(&port->ip_lock, port_flags);
2460 set_notification(port, N_ALL, 0);
2461 info->flags &= ~UIF_INITIALIZED;
2462 spin_unlock_irqrestore(&port->ip_lock, port_flags);
2463}
2464
2465/**
2466 * ic4_set_mctrl - set control lines (dtr, rts, etc)
2467 * @port: Port to operate on
2468 * @mctrl: Lines to set/unset
2469 *
2470 */
2471static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl)
2472{
2473 unsigned char mcr = 0;
2474
2475 if (mctrl & TIOCM_RTS)
2476 mcr |= UART_MCR_RTS;
2477 if (mctrl & TIOCM_DTR)
2478 mcr |= UART_MCR_DTR;
2479 if (mctrl & TIOCM_OUT1)
2480 mcr |= UART_MCR_OUT1;
2481 if (mctrl & TIOCM_OUT2)
2482 mcr |= UART_MCR_OUT2;
2483 if (mctrl & TIOCM_LOOP)
2484 mcr |= UART_MCR_LOOP;
2485
2486 set_mcr(the_port, 1, mcr, IOC4_SHADOW_DTR);
2487}
2488
2489/**
2490 * ic4_get_mctrl - get control line info
2491 * @port: port to operate on
2492 *
2493 */
2494static unsigned int ic4_get_mctrl(struct uart_port *the_port)
2495{
2496 struct ioc4_port *port = get_ioc4_port(the_port);
2497 uint32_t shadow;
2498 unsigned int ret = 0;
2499
2500 if (!port)
2501 return 0;
2502
2503 shadow = readl(&port->ip_serial_regs->shadow);
2504 if (shadow & IOC4_SHADOW_DCD)
2505 ret |= TIOCM_CAR;
2506 if (shadow & IOC4_SHADOW_DR)
2507 ret |= TIOCM_DSR;
2508 if (shadow & IOC4_SHADOW_CTS)
2509 ret |= TIOCM_CTS;
2510 return ret;
2511}
2512
2513/**
2514 * ic4_start_tx - Start transmitter, flush any output
2515 * @port: Port to operate on
2516 * @tty_stop: Set to 1 if called via uart_start
2517 *
2518 */
2519static void ic4_start_tx(struct uart_port *the_port, unsigned int tty_stop)
2520{
2521 struct ioc4_port *port = get_ioc4_port(the_port);
2522 unsigned long flags;
2523
2524 if (port) {
2525 spin_lock_irqsave(&port->ip_lock, flags);
2526 transmit_chars(the_port);
2527 spin_unlock_irqrestore(&port->ip_lock, flags);
2528 }
2529}
2530
2531/**
2532 * ic4_break_ctl - handle breaks
2533 * @port: Port to operate on
2534 * @break_state: Break state
2535 *
2536 */
2537static void ic4_break_ctl(struct uart_port *the_port, int break_state)
2538{
2539}
2540
2541/**
2542 * ic4_startup - Start up the serial port - always return 0 (We're always on)
2543 * @port: Port to operate on
2544 *
2545 */
2546static int ic4_startup(struct uart_port *the_port)
2547{
2548 int retval;
2549 struct ioc4_port *port;
2550 struct ioc4_control *control;
2551 struct uart_info *info;
2552 unsigned long port_flags;
2553
2554 if (!the_port) {
2555 return -ENODEV;
2556 }
2557 port = get_ioc4_port(the_port);
2558 if (!port) {
2559 return -ENODEV;
2560 }
2561 info = the_port->info;
2562
2563 control = port->ip_control;
2564 if (!control) {
2565 return -ENODEV;
2566 }
2567
2568 /* Start up the serial port */
2569 spin_lock_irqsave(&port->ip_lock, port_flags);
2570 retval = ic4_startup_local(the_port);
2571 spin_unlock_irqrestore(&port->ip_lock, port_flags);
2572 return retval;
2573}
2574
2575/**
2576 * ic4_set_termios - set termios stuff
2577 * @port: port to operate on
2578 * @termios: New settings
2579 * @termios: Old
2580 *
2581 */
2582static void
2583ic4_set_termios(struct uart_port *the_port,
2584 struct termios *termios, struct termios *old_termios)
2585{
2586 struct ioc4_port *port = get_ioc4_port(the_port);
2587 unsigned long port_flags;
2588
2589 spin_lock_irqsave(&port->ip_lock, port_flags);
2590 ioc4_change_speed(the_port, termios, old_termios);
2591 spin_unlock_irqrestore(&port->ip_lock, port_flags);
2592}
2593
2594/**
2595 * ic4_request_port - allocate resources for port - no op....
2596 * @port: port to operate on
2597 *
2598 */
2599static int ic4_request_port(struct uart_port *port)
2600{
2601 return 0;
2602}
2603
2604/* Associate the uart functions above - given to serial core */
2605
2606static struct uart_ops ioc4_ops = {
2607 .tx_empty = ic4_tx_empty,
2608 .set_mctrl = ic4_set_mctrl,
2609 .get_mctrl = ic4_get_mctrl,
2610 .stop_tx = ic4_stop_tx,
2611 .start_tx = ic4_start_tx,
2612 .stop_rx = null_void_function,
2613 .enable_ms = null_void_function,
2614 .break_ctl = ic4_break_ctl,
2615 .startup = ic4_startup,
2616 .shutdown = ic4_shutdown,
2617 .set_termios = ic4_set_termios,
2618 .type = ic4_type,
2619 .release_port = null_void_function,
2620 .request_port = ic4_request_port,
2621};
2622
2623/*
2624 * Boot-time initialization code
2625 */
2626
2627static struct uart_driver ioc4_uart = {
2628 .owner = THIS_MODULE,
2629 .driver_name = "ioc4_serial",
2630 .dev_name = DEVICE_NAME,
2631 .major = DEVICE_MAJOR,
2632 .minor = DEVICE_MINOR,
2633 .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS,
2634};
2635
2636/**
2637 * ioc4_serial_core_attach - register with serial core
2638 * This is done during pci probing
2639 * @pdev: handle for this card
2640 */
2641static inline int
2642ioc4_serial_core_attach(struct pci_dev *pdev)
2643{
2644 struct ioc4_port *port;
2645 struct uart_port *the_port;
2646 struct ioc4_control *control = pci_get_drvdata(pdev);
2647 int ii;
2648
2649 DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n",
2650 __FUNCTION__, pdev, (void *)control));
2651
2652 if (!control)
2653 return -ENODEV;
2654
2655 /* once around for each port on this card */
2656 for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) {
2657 the_port = &control->ic_port[ii].icp_uart_port;
2658 port = control->ic_port[ii].icp_port;
2659 port->ip_port = the_port;
2660
2661 DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p\n",
2662 __FUNCTION__, (void *)the_port,
2663 (void *)port));
2664
2665 spin_lock_init(&the_port->lock);
2666 /* membase, iobase and mapbase just need to be non-0 */
2667 the_port->membase = (unsigned char __iomem *)1;
2668 the_port->line = the_port->iobase = ii;
2669 the_port->mapbase = 1;
2670 the_port->type = PORT_16550A;
2671 the_port->fifosize = IOC4_MAX_CHARS;
2672 the_port->ops = &ioc4_ops;
2673 the_port->irq = control->ic_irq;
2674 the_port->dev = &pdev->dev;
2675 if (uart_add_one_port(&ioc4_uart, the_port) < 0) {
2676 printk(KERN_WARNING
2677 "%s: unable to add port %d\n",
2678 __FUNCTION__, the_port->line);
2679 } else {
2680 DPRINT_CONFIG(
2681 ("IOC4 serial driver port %d irq = %d\n",
2682 the_port->line, the_port->irq));
2683 }
2684 /* all ports are rs232 for now */
2685 ioc4_set_proto(port, PROTO_RS232);
2686 }
2687 return 0;
2688}
2689
2690/**
2691 * ioc4_serial_attach_one - register attach function
2692 * called per card found from ioc4_serial_detect as part
2693 * of module_init().
2694 * @pdev: handle for this card
2695 * @pci_id: pci id for this card
2696 */
2697int
2698ioc4_serial_attach_one(struct pci_dev *pdev, const struct pci_device_id *pci_id)
2699{
2700 struct ioc4_mem __iomem *mem;
2701 unsigned long tmp_addr, tmp_addr1;
2702 struct ioc4_serial __iomem *serial;
2703 struct ioc4_soft *soft;
2704 struct ioc4_control *control;
2705 int tmp, ret = 0;
2706
2707
2708 DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, pdev, pci_id));
2709
2710 /* Map in the ioc4 memory */
2711 tmp_addr = pci_resource_start(pdev, 0);
2712 if (!tmp_addr) {
2713 printk(KERN_WARNING
2714 "ioc4 (%p) : unable to get PIO mapping for "
2715 "MEM space\n", (void *)pdev);
2716 return -ENODEV;
2717 }
2718 if (!request_region(tmp_addr, sizeof(struct ioc4_mem), "sioc4_mem")) {
2719 printk(KERN_ALERT
2720 "ioc4 (%p): unable to get request region for "
2721 "MEM space\n", (void *)pdev);
2722 return -ENODEV;
2723 }
2724 mem = ioremap(tmp_addr, sizeof(struct ioc4_mem));
2725 if (!mem) {
2726 printk(KERN_WARNING
2727 "ioc4 (%p) : unable to remap ioc4 memory\n",
2728 (void *)pdev);
2729 ret = -ENODEV;
2730 goto out1;
2731 }
2732
2733 /* request serial registers */
2734 tmp_addr1 = pci_resource_start(pdev, 0) + IOC4_SERIAL_OFFSET;
2735
2736 if (!request_region(tmp_addr1, sizeof(struct ioc4_serial),
2737 "sioc4_uart")) {
2738 printk(KERN_WARNING
2739 "ioc4 (%p): unable to get request region for "
2740 "uart space\n", (void *)pdev);
2741 ret = -ENODEV;
2742 goto out1;
2743 }
2744 serial = ioremap(tmp_addr1, sizeof(struct ioc4_serial));
2745 if (!serial) {
2746 printk(KERN_WARNING
2747 "ioc4 (%p) : unable to remap ioc4 serial register\n",
2748 (void *)pdev);
2749 ret = -ENODEV;
2750 goto out2;
2751 }
2752 DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n",
2753 __FUNCTION__, (void *)mem, (void *)serial));
2754
2755 /* Get memory for the new card */
2756 control = kmalloc(sizeof(struct ioc4_control) * IOC4_NUM_SERIAL_PORTS,
2757 GFP_KERNEL);
2758
2759 if (!control) {
2760 printk(KERN_WARNING "ioc4_attach_one"
2761 ": unable to get memory for the IOC4\n");
2762 ret = -ENOMEM;
2763 goto out2;
2764 }
2765 memset(control, 0, sizeof(struct ioc4_control));
2766 pci_set_drvdata(pdev, control);
2767
2768 /* Allocate the soft structure */
2769 soft = kmalloc(sizeof(struct ioc4_soft), GFP_KERNEL);
2770 if (!soft) {
2771 printk(KERN_WARNING
2772 "ioc4 (%p): unable to get memory for the soft struct\n",
2773 (void *)pdev);
2774 ret = -ENOMEM;
2775 goto out3;
2776 }
2777 memset(soft, 0, sizeof(struct ioc4_soft));
2778
2779 spin_lock_init(&soft->is_ir_lock);
2780 soft->is_ioc4_mem_addr = mem;
2781 soft->is_ioc4_serial_addr = serial;
2782
2783 /* Init the IOC4 */
2784 pci_read_config_dword(pdev, PCI_COMMAND, &tmp);
2785 pci_write_config_dword(pdev, PCI_COMMAND,
2786 tmp | PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
2787
2788 writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT, &mem->sio_cr);
2789
2790 /* Enable serial port mode select generic PIO pins as outputs */
2791 writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL
2792 | IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL,
2793 &mem->gpcr_s);
2794
2795 /* Clear and disable all interrupts */
2796 write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
2797 writel(~0, &mem->sio_ir);
2798 write_ireg(soft, ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR),
2799 IOC4_W_IEC, IOC4_OTHER_INTR_TYPE);
2800 writel(~(IOC4_OTHER_IR_ATA_MEMERR | IOC4_OTHER_IR_ATA_MEMERR),
2801 &mem->other_ir);
2802 control->ic_soft = soft;
2803 if (!request_irq(pdev->irq, ioc4_intr, SA_SHIRQ,
2804 "sgi-ioc4serial", (void *)soft)) {
2805 control->ic_irq = pdev->irq;
2806 } else {
2807 printk(KERN_WARNING
2808 "%s : request_irq fails for IRQ 0x%x\n ",
2809 __FUNCTION__, pdev->irq);
2810 }
2811 if ((ret = ioc4_attach_local(pdev, control, soft,
2812 soft->is_ioc4_mem_addr,
2813 soft->is_ioc4_serial_addr)))
2814 goto out4;
2815
2816 /* register port with the serial core */
2817
2818 if ((ret = ioc4_serial_core_attach(pdev)))
2819 goto out4;
2820
2821 return ret;
2822
2823 /* error exits that give back resources */
2824out4:
2825 kfree(soft);
2826out3:
2827 kfree(control);
2828out2:
2829 release_region(tmp_addr1, sizeof(struct ioc4_serial));
2830out1:
2831 release_region(tmp_addr, sizeof(struct ioc4_mem));
2832
2833 return ret;
2834}
2835
2836
2837/**
2838 * ioc4_serial_remove_one - detach function
2839 *
2840 * @pdev: handle for this card
2841 */
2842
2843#if 0
2844void ioc4_serial_remove_one(struct pci_dev *pdev)
2845{
2846 int ii;
2847 struct ioc4_control *control;
2848 struct uart_port *the_port;
2849 struct ioc4_port *port;
2850 struct ioc4_soft *soft;
2851
2852 control = pci_get_drvdata(pdev);
2853
2854 for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) {
2855 the_port = &control->ic_port[ii].icp_uart_port;
2856 if (the_port) {
2857 uart_remove_one_port(&ioc4_uart, the_port);
2858 }
2859 port = control->ic_port[ii].icp_port;
2860 if (!(ii & 1) && port) {
2861 pci_free_consistent(port->ip_pdev,
2862 TOTAL_RING_BUF_SIZE,
2863 (void *)port->ip_cpu_ringbuf,
2864 port->ip_dma_ringbuf);
2865 kfree(port);
2866 }
2867 }
2868 soft = control->ic_soft;
2869 if (soft) {
2870 free_irq(control->ic_irq, (void *)soft);
2871 if (soft->is_ioc4_serial_addr) {
2872 release_region((unsigned long)
2873 soft->is_ioc4_serial_addr,
2874 sizeof(struct ioc4_serial));
2875 }
2876 kfree(soft);
2877 }
2878 kfree(control);
2879 pci_set_drvdata(pdev, NULL);
2880 uart_unregister_driver(&ioc4_uart);
2881}
2882#endif
2883
2884/**
2885 * ioc4_serial_init - module init
2886 */
2887int ioc4_serial_init(void)
2888{
2889 int ret;
2890
2891 /* register with serial core */
2892 if ((ret = uart_register_driver(&ioc4_uart)) < 0) {
2893 printk(KERN_WARNING
2894 "%s: Couldn't register IOC4 serial driver\n",
2895 __FUNCTION__);
2896 return ret;
2897 }
2898 return 0;
2899}
2900
2901MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");
2902MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card");
2903MODULE_LICENSE("GPL");
2904
2905EXPORT_SYMBOL(ioc4_serial_init);
2906EXPORT_SYMBOL(ioc4_serial_attach_one);
Linux kernel - Deliverables
This page took 0.141851 seconds and 5 git commands to generate.