Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*====================================================================== |
2 | ||
3 | A driver for PCMCIA serial devices | |
4 | ||
5 | serial_cs.c 1.134 2002/05/04 05:48:53 | |
6 | ||
7 | The contents of this file are subject to the Mozilla Public | |
8 | License Version 1.1 (the "License"); you may not use this file | |
9 | except in compliance with the License. You may obtain a copy of | |
10 | the License at http://www.mozilla.org/MPL/ | |
11 | ||
12 | Software distributed under the License is distributed on an "AS | |
13 | IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | |
14 | implied. See the License for the specific language governing | |
15 | rights and limitations under the License. | |
16 | ||
17 | The initial developer of the original code is David A. Hinds | |
18 | <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | |
19 | are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
20 | ||
21 | Alternatively, the contents of this file may be used under the | |
22 | terms of the GNU General Public License version 2 (the "GPL"), in which | |
23 | case the provisions of the GPL are applicable instead of the | |
24 | above. If you wish to allow the use of your version of this file | |
25 | only under the terms of the GPL and not to allow others to use | |
26 | your version of this file under the MPL, indicate your decision | |
27 | by deleting the provisions above and replace them with the notice | |
28 | and other provisions required by the GPL. If you do not delete | |
29 | the provisions above, a recipient may use your version of this | |
30 | file under either the MPL or the GPL. | |
31 | ||
32 | ======================================================================*/ | |
33 | ||
34 | #include <linux/module.h> | |
35 | #include <linux/moduleparam.h> | |
36 | #include <linux/kernel.h> | |
37 | #include <linux/init.h> | |
38 | #include <linux/sched.h> | |
39 | #include <linux/ptrace.h> | |
40 | #include <linux/slab.h> | |
41 | #include <linux/string.h> | |
42 | #include <linux/timer.h> | |
43 | #include <linux/serial_core.h> | |
30bac7aa | 44 | #include <linux/delay.h> |
1da177e4 LT |
45 | #include <linux/major.h> |
46 | #include <asm/io.h> | |
47 | #include <asm/system.h> | |
48 | ||
1da177e4 LT |
49 | #include <pcmcia/cs_types.h> |
50 | #include <pcmcia/cs.h> | |
51 | #include <pcmcia/cistpl.h> | |
52 | #include <pcmcia/ciscode.h> | |
53 | #include <pcmcia/ds.h> | |
54 | #include <pcmcia/cisreg.h> | |
55 | ||
56 | #include "8250.h" | |
57 | ||
58 | #ifdef PCMCIA_DEBUG | |
59 | static int pc_debug = PCMCIA_DEBUG; | |
60 | module_param(pc_debug, int, 0644); | |
61 | #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) | |
62 | static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)"; | |
63 | #else | |
64 | #define DEBUG(n, args...) | |
65 | #endif | |
66 | ||
67 | /*====================================================================*/ | |
68 | ||
69 | /* Parameters that can be set with 'insmod' */ | |
70 | ||
71 | /* Enable the speaker? */ | |
72 | static int do_sound = 1; | |
73 | /* Skip strict UART tests? */ | |
74 | static int buggy_uart; | |
75 | ||
76 | module_param(do_sound, int, 0444); | |
77 | module_param(buggy_uart, int, 0444); | |
78 | ||
79 | /*====================================================================*/ | |
80 | ||
81 | /* Table of multi-port card ID's */ | |
82 | ||
1fbbac4b | 83 | struct serial_quirk { |
a8244b56 RK |
84 | unsigned int manfid; |
85 | unsigned int prodid; | |
1da177e4 | 86 | int multi; /* 1 = multifunction, > 1 = # ports */ |
efd92dfa | 87 | void (*config)(struct pcmcia_device *); |
7ef057fa | 88 | void (*wakeup)(struct pcmcia_device *); |
eee3a883 | 89 | int (*post)(struct pcmcia_device *); |
1da177e4 LT |
90 | }; |
91 | ||
eee3a883 RK |
92 | struct serial_info { |
93 | struct pcmcia_device *p_dev; | |
94 | int ndev; | |
95 | int multi; | |
96 | int slave; | |
97 | int manfid; | |
98 | int prodid; | |
99 | int c950ctrl; | |
100 | dev_node_t node[4]; | |
101 | int line[4]; | |
102 | const struct serial_quirk *quirk; | |
103 | }; | |
104 | ||
105 | struct serial_cfg_mem { | |
106 | tuple_t tuple; | |
107 | cisparse_t parse; | |
108 | u_char buf[256]; | |
109 | }; | |
110 | ||
111 | static int quirk_post_ibm(struct pcmcia_device *link) | |
112 | { | |
113 | conf_reg_t reg = { 0, CS_READ, 0x800, 0 }; | |
114 | int last_ret, last_fn; | |
115 | ||
116 | last_ret = pcmcia_access_configuration_register(link, ®); | |
117 | if (last_ret) { | |
118 | last_fn = AccessConfigurationRegister; | |
119 | goto cs_failed; | |
120 | } | |
121 | reg.Action = CS_WRITE; | |
122 | reg.Value = reg.Value | 1; | |
123 | last_ret = pcmcia_access_configuration_register(link, ®); | |
124 | if (last_ret) { | |
125 | last_fn = AccessConfigurationRegister; | |
126 | goto cs_failed; | |
127 | } | |
128 | return 0; | |
129 | ||
130 | cs_failed: | |
131 | cs_error(link, last_fn, last_ret); | |
132 | return -ENODEV; | |
133 | } | |
134 | ||
7ef057fa RK |
135 | static void quirk_wakeup_oxsemi(struct pcmcia_device *link) |
136 | { | |
137 | struct serial_info *info = link->priv; | |
138 | ||
139 | outb(12, info->c950ctrl + 1); | |
140 | } | |
141 | ||
142 | /* request_region? oxsemi branch does no request_region too... */ | |
143 | /* | |
144 | * This sequence is needed to properly initialize MC45 attached to OXCF950. | |
145 | * I tried decreasing these msleep()s, but it worked properly (survived | |
146 | * 1000 stop/start operations) with these timeouts (or bigger). | |
147 | */ | |
148 | static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) | |
149 | { | |
150 | struct serial_info *info = link->priv; | |
151 | unsigned int ctrl = info->c950ctrl; | |
152 | ||
153 | outb(0xA, ctrl + 1); | |
154 | msleep(100); | |
155 | outb(0xE, ctrl + 1); | |
156 | msleep(300); | |
157 | outb(0xC, ctrl + 1); | |
158 | msleep(100); | |
159 | outb(0xE, ctrl + 1); | |
160 | msleep(200); | |
161 | outb(0xF, ctrl + 1); | |
162 | msleep(100); | |
163 | outb(0xE, ctrl + 1); | |
164 | msleep(100); | |
165 | outb(0xC, ctrl + 1); | |
166 | } | |
167 | ||
efd92dfa RK |
168 | /* |
169 | * Socket Dual IO: this enables irq's for second port | |
170 | */ | |
171 | static void quirk_config_socket(struct pcmcia_device *link) | |
172 | { | |
173 | struct serial_info *info = link->priv; | |
174 | ||
175 | if (info->multi) { | |
176 | link->conf.Present |= PRESENT_EXT_STATUS; | |
177 | link->conf.ExtStatus = ESR_REQ_ATTN_ENA; | |
178 | } | |
179 | } | |
180 | ||
1fbbac4b RK |
181 | static const struct serial_quirk quirks[] = { |
182 | { | |
eee3a883 RK |
183 | .manfid = MANFID_IBM, |
184 | .prodid = ~0, | |
185 | .multi = -1, | |
186 | .post = quirk_post_ibm, | |
7ef057fa RK |
187 | }, { |
188 | .manfid = MANFID_INTEL, | |
189 | .prodid = PRODID_INTEL_DUAL_RS232, | |
190 | .multi = 2, | |
191 | }, { | |
192 | .manfid = MANFID_NATINST, | |
193 | .prodid = PRODID_NATINST_QUAD_RS232, | |
194 | .multi = 4, | |
eee3a883 | 195 | }, { |
1fbbac4b RK |
196 | .manfid = MANFID_OMEGA, |
197 | .prodid = PRODID_OMEGA_QSP_100, | |
198 | .multi = 4, | |
7ef057fa RK |
199 | }, { |
200 | .manfid = MANFID_OXSEMI, | |
201 | .prodid = ~0, | |
202 | .multi = -1, | |
203 | .wakeup = quirk_wakeup_oxsemi, | |
204 | }, { | |
205 | .manfid = MANFID_POSSIO, | |
206 | .prodid = PRODID_POSSIO_GCC, | |
207 | .multi = -1, | |
208 | .wakeup = quirk_wakeup_possio_gcc, | |
1fbbac4b RK |
209 | }, { |
210 | .manfid = MANFID_QUATECH, | |
211 | .prodid = PRODID_QUATECH_DUAL_RS232, | |
212 | .multi = 2, | |
213 | }, { | |
214 | .manfid = MANFID_QUATECH, | |
215 | .prodid = PRODID_QUATECH_DUAL_RS232_D1, | |
216 | .multi = 2, | |
217 | }, { | |
218 | .manfid = MANFID_QUATECH, | |
219 | .prodid = PRODID_QUATECH_QUAD_RS232, | |
220 | .multi = 4, | |
221 | }, { | |
222 | .manfid = MANFID_SOCKET, | |
223 | .prodid = PRODID_SOCKET_DUAL_RS232, | |
224 | .multi = 2, | |
efd92dfa RK |
225 | .config = quirk_config_socket, |
226 | }, { | |
227 | .manfid = MANFID_SOCKET, | |
228 | .prodid = ~0, | |
229 | .multi = -1, | |
230 | .config = quirk_config_socket, | |
1fbbac4b | 231 | } |
1da177e4 | 232 | }; |
1da177e4 | 233 | |
16f31113 | 234 | |
15b99ac1 | 235 | static int serial_config(struct pcmcia_device * link); |
1da177e4 | 236 | |
1da177e4 | 237 | |
1da177e4 LT |
238 | /*====================================================================== |
239 | ||
240 | After a card is removed, serial_remove() will unregister | |
241 | the serial device(s), and release the PCMCIA configuration. | |
242 | ||
243 | ======================================================================*/ | |
244 | ||
fba395ee | 245 | static void serial_remove(struct pcmcia_device *link) |
1da177e4 LT |
246 | { |
247 | struct serial_info *info = link->priv; | |
248 | int i; | |
249 | ||
1da177e4 LT |
250 | DEBUG(0, "serial_release(0x%p)\n", link); |
251 | ||
252 | /* | |
253 | * Recheck to see if the device is still configured. | |
254 | */ | |
e2d40963 DB |
255 | for (i = 0; i < info->ndev; i++) |
256 | serial8250_unregister_port(info->line[i]); | |
1da177e4 | 257 | |
e2d40963 | 258 | info->p_dev->dev_node = NULL; |
1da177e4 | 259 | |
e2d40963 DB |
260 | if (!info->slave) |
261 | pcmcia_disable_device(link); | |
1da177e4 LT |
262 | } |
263 | ||
fba395ee | 264 | static int serial_suspend(struct pcmcia_device *link) |
1da177e4 | 265 | { |
e2d40963 DB |
266 | struct serial_info *info = link->priv; |
267 | int i; | |
1da177e4 | 268 | |
e2d40963 DB |
269 | for (i = 0; i < info->ndev; i++) |
270 | serial8250_suspend_port(info->line[i]); | |
98e4c28b DB |
271 | |
272 | return 0; | |
1da177e4 LT |
273 | } |
274 | ||
fba395ee | 275 | static int serial_resume(struct pcmcia_device *link) |
1da177e4 | 276 | { |
9940ec36 | 277 | if (pcmcia_dev_present(link)) { |
1da177e4 LT |
278 | struct serial_info *info = link->priv; |
279 | int i; | |
280 | ||
1da177e4 LT |
281 | for (i = 0; i < info->ndev; i++) |
282 | serial8250_resume_port(info->line[i]); | |
7ef057fa RK |
283 | |
284 | if (info->quirk && info->quirk->wakeup) | |
285 | info->quirk->wakeup(link); | |
1da177e4 | 286 | } |
98e4c28b DB |
287 | |
288 | return 0; | |
1da177e4 LT |
289 | } |
290 | ||
291 | /*====================================================================== | |
292 | ||
293 | serial_attach() creates an "instance" of the driver, allocating | |
294 | local data structures for one device. The device is registered | |
295 | with Card Services. | |
296 | ||
297 | ======================================================================*/ | |
298 | ||
fba395ee | 299 | static int serial_probe(struct pcmcia_device *link) |
1da177e4 LT |
300 | { |
301 | struct serial_info *info; | |
1da177e4 LT |
302 | |
303 | DEBUG(0, "serial_attach()\n"); | |
304 | ||
305 | /* Create new serial device */ | |
306 | info = kmalloc(sizeof (*info), GFP_KERNEL); | |
307 | if (!info) | |
f8cfa618 | 308 | return -ENOMEM; |
1da177e4 | 309 | memset(info, 0, sizeof (*info)); |
fba395ee | 310 | info->p_dev = link; |
1da177e4 LT |
311 | link->priv = info; |
312 | ||
313 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; | |
314 | link->io.NumPorts1 = 8; | |
315 | link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; | |
316 | link->irq.IRQInfo1 = IRQ_LEVEL_ID; | |
317 | link->conf.Attributes = CONF_ENABLE_IRQ; | |
318 | if (do_sound) { | |
319 | link->conf.Attributes |= CONF_ENABLE_SPKR; | |
320 | link->conf.Status = CCSR_AUDIO_ENA; | |
321 | } | |
322 | link->conf.IntType = INT_MEMORY_AND_IO; | |
323 | ||
15b99ac1 | 324 | return serial_config(link); |
1da177e4 LT |
325 | } |
326 | ||
327 | /*====================================================================== | |
328 | ||
329 | This deletes a driver "instance". The device is de-registered | |
330 | with Card Services. If it has been released, all local data | |
331 | structures are freed. Otherwise, the structures will be freed | |
332 | when the device is released. | |
333 | ||
334 | ======================================================================*/ | |
335 | ||
fba395ee | 336 | static void serial_detach(struct pcmcia_device *link) |
1da177e4 LT |
337 | { |
338 | struct serial_info *info = link->priv; | |
1da177e4 LT |
339 | |
340 | DEBUG(0, "serial_detach(0x%p)\n", link); | |
341 | ||
1da177e4 LT |
342 | /* |
343 | * Ensure any outstanding scheduled tasks are completed. | |
344 | */ | |
345 | flush_scheduled_work(); | |
346 | ||
347 | /* | |
348 | * Ensure that the ports have been released. | |
349 | */ | |
350 | serial_remove(link); | |
351 | ||
b4635811 | 352 | /* free bits */ |
1da177e4 LT |
353 | kfree(info); |
354 | } | |
355 | ||
356 | /*====================================================================*/ | |
357 | ||
fba395ee | 358 | static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, |
1da177e4 LT |
359 | kio_addr_t iobase, int irq) |
360 | { | |
361 | struct uart_port port; | |
362 | int line; | |
363 | ||
364 | memset(&port, 0, sizeof (struct uart_port)); | |
365 | port.iobase = iobase; | |
366 | port.irq = irq; | |
367 | port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; | |
368 | port.uartclk = 1843200; | |
369 | port.dev = &handle_to_dev(handle); | |
370 | if (buggy_uart) | |
371 | port.flags |= UPF_BUGGY_UART; | |
372 | line = serial8250_register_port(&port); | |
373 | if (line < 0) { | |
374 | printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " | |
375 | "0x%04lx, irq %d failed\n", (u_long)iobase, irq); | |
376 | return -EINVAL; | |
377 | } | |
378 | ||
379 | info->line[info->ndev] = line; | |
380 | sprintf(info->node[info->ndev].dev_name, "ttyS%d", line); | |
381 | info->node[info->ndev].major = TTY_MAJOR; | |
382 | info->node[info->ndev].minor = 0x40 + line; | |
383 | if (info->ndev > 0) | |
384 | info->node[info->ndev - 1].next = &info->node[info->ndev]; | |
385 | info->ndev++; | |
386 | ||
387 | return 0; | |
388 | } | |
389 | ||
390 | /*====================================================================*/ | |
391 | ||
392 | static int | |
fba395ee | 393 | first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) |
1da177e4 LT |
394 | { |
395 | int i; | |
396 | i = pcmcia_get_first_tuple(handle, tuple); | |
397 | if (i != CS_SUCCESS) | |
398 | return CS_NO_MORE_ITEMS; | |
399 | i = pcmcia_get_tuple_data(handle, tuple); | |
400 | if (i != CS_SUCCESS) | |
401 | return i; | |
402 | return pcmcia_parse_tuple(handle, tuple, parse); | |
403 | } | |
404 | ||
405 | static int | |
fba395ee | 406 | next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) |
1da177e4 LT |
407 | { |
408 | int i; | |
409 | i = pcmcia_get_next_tuple(handle, tuple); | |
410 | if (i != CS_SUCCESS) | |
411 | return CS_NO_MORE_ITEMS; | |
412 | i = pcmcia_get_tuple_data(handle, tuple); | |
413 | if (i != CS_SUCCESS) | |
414 | return i; | |
415 | return pcmcia_parse_tuple(handle, tuple, parse); | |
416 | } | |
417 | ||
418 | /*====================================================================*/ | |
419 | ||
fba395ee | 420 | static int simple_config(struct pcmcia_device *link) |
1da177e4 | 421 | { |
cb3592be AV |
422 | static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; |
423 | static const int size_table[2] = { 8, 16 }; | |
1da177e4 | 424 | struct serial_info *info = link->priv; |
16f31113 YR |
425 | struct serial_cfg_mem *cfg_mem; |
426 | tuple_t *tuple; | |
427 | u_char *buf; | |
428 | cisparse_t *parse; | |
429 | cistpl_cftable_entry_t *cf; | |
1da177e4 LT |
430 | config_info_t config; |
431 | int i, j, try; | |
432 | int s; | |
433 | ||
16f31113 YR |
434 | cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); |
435 | if (!cfg_mem) | |
436 | return -1; | |
437 | ||
438 | tuple = &cfg_mem->tuple; | |
439 | parse = &cfg_mem->parse; | |
440 | cf = &parse->cftable_entry; | |
441 | buf = cfg_mem->buf; | |
442 | ||
1da177e4 | 443 | /* If the card is already configured, look up the port and irq */ |
fba395ee | 444 | i = pcmcia_get_configuration_info(link, &config); |
1da177e4 LT |
445 | if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) { |
446 | kio_addr_t port = 0; | |
447 | if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) { | |
448 | port = config.BasePort2; | |
449 | info->slave = 1; | |
450 | } else if ((info->manfid == MANFID_OSITECH) && | |
451 | (config.NumPorts1 == 0x40)) { | |
452 | port = config.BasePort1 + 0x28; | |
453 | info->slave = 1; | |
454 | } | |
16f31113 YR |
455 | if (info->slave) { |
456 | kfree(cfg_mem); | |
fba395ee | 457 | return setup_serial(link, info, port, config.AssignedIRQ); |
16f31113 | 458 | } |
1da177e4 | 459 | } |
1da177e4 LT |
460 | |
461 | /* First pass: look for a config entry that looks normal. */ | |
16f31113 YR |
462 | tuple->TupleData = (cisdata_t *) buf; |
463 | tuple->TupleOffset = 0; | |
464 | tuple->TupleDataMax = 255; | |
465 | tuple->Attributes = 0; | |
466 | tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
1da177e4 LT |
467 | /* Two tries: without IO aliases, then with aliases */ |
468 | for (s = 0; s < 2; s++) { | |
469 | for (try = 0; try < 2; try++) { | |
fba395ee | 470 | i = first_tuple(link, tuple, parse); |
1da177e4 LT |
471 | while (i != CS_NO_MORE_ITEMS) { |
472 | if (i != CS_SUCCESS) | |
473 | goto next_entry; | |
474 | if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) | |
70294b46 | 475 | link->conf.Vpp = |
1da177e4 LT |
476 | cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; |
477 | if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) && | |
478 | (cf->io.win[0].base != 0)) { | |
479 | link->conf.ConfigIndex = cf->index; | |
480 | link->io.BasePort1 = cf->io.win[0].base; | |
481 | link->io.IOAddrLines = (try == 0) ? | |
482 | 16 : cf->io.flags & CISTPL_IO_LINES_MASK; | |
fba395ee | 483 | i = pcmcia_request_io(link, &link->io); |
1da177e4 LT |
484 | if (i == CS_SUCCESS) |
485 | goto found_port; | |
486 | } | |
487 | next_entry: | |
fba395ee | 488 | i = next_tuple(link, tuple, parse); |
1da177e4 LT |
489 | } |
490 | } | |
491 | } | |
492 | /* Second pass: try to find an entry that isn't picky about | |
493 | its base address, then try to grab any standard serial port | |
494 | address, and finally try to get any free port. */ | |
fba395ee | 495 | i = first_tuple(link, tuple, parse); |
1da177e4 LT |
496 | while (i != CS_NO_MORE_ITEMS) { |
497 | if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && | |
498 | ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { | |
499 | link->conf.ConfigIndex = cf->index; | |
500 | for (j = 0; j < 5; j++) { | |
501 | link->io.BasePort1 = base[j]; | |
502 | link->io.IOAddrLines = base[j] ? 16 : 3; | |
fba395ee | 503 | i = pcmcia_request_io(link, &link->io); |
1da177e4 LT |
504 | if (i == CS_SUCCESS) |
505 | goto found_port; | |
506 | } | |
507 | } | |
fba395ee | 508 | i = next_tuple(link, tuple, parse); |
1da177e4 LT |
509 | } |
510 | ||
511 | found_port: | |
512 | if (i != CS_SUCCESS) { | |
513 | printk(KERN_NOTICE | |
514 | "serial_cs: no usable port range found, giving up\n"); | |
fba395ee | 515 | cs_error(link, RequestIO, i); |
16f31113 | 516 | kfree(cfg_mem); |
1da177e4 LT |
517 | return -1; |
518 | } | |
519 | ||
fba395ee | 520 | i = pcmcia_request_irq(link, &link->irq); |
1da177e4 | 521 | if (i != CS_SUCCESS) { |
fba395ee | 522 | cs_error(link, RequestIRQ, i); |
1da177e4 LT |
523 | link->irq.AssignedIRQ = 0; |
524 | } | |
525 | if (info->multi && (info->manfid == MANFID_3COM)) | |
526 | link->conf.ConfigIndex &= ~(0x08); | |
efd92dfa RK |
527 | |
528 | /* | |
529 | * Apply any configuration quirks. | |
530 | */ | |
531 | if (info->quirk && info->quirk->config) | |
532 | info->quirk->config(link); | |
533 | ||
fba395ee | 534 | i = pcmcia_request_configuration(link, &link->conf); |
1da177e4 | 535 | if (i != CS_SUCCESS) { |
fba395ee | 536 | cs_error(link, RequestConfiguration, i); |
16f31113 | 537 | kfree(cfg_mem); |
1da177e4 LT |
538 | return -1; |
539 | } | |
16f31113 | 540 | kfree(cfg_mem); |
fba395ee | 541 | return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); |
1da177e4 LT |
542 | } |
543 | ||
fba395ee | 544 | static int multi_config(struct pcmcia_device * link) |
1da177e4 | 545 | { |
1da177e4 | 546 | struct serial_info *info = link->priv; |
16f31113 YR |
547 | struct serial_cfg_mem *cfg_mem; |
548 | tuple_t *tuple; | |
549 | u_char *buf; | |
550 | cisparse_t *parse; | |
551 | cistpl_cftable_entry_t *cf; | |
16f31113 YR |
552 | int i, rc, base2 = 0; |
553 | ||
554 | cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); | |
555 | if (!cfg_mem) | |
556 | return -1; | |
557 | tuple = &cfg_mem->tuple; | |
558 | parse = &cfg_mem->parse; | |
559 | cf = &parse->cftable_entry; | |
560 | buf = cfg_mem->buf; | |
1da177e4 | 561 | |
16f31113 YR |
562 | tuple->TupleData = (cisdata_t *) buf; |
563 | tuple->TupleOffset = 0; | |
564 | tuple->TupleDataMax = 255; | |
565 | tuple->Attributes = 0; | |
566 | tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
1da177e4 LT |
567 | |
568 | /* First, look for a generic full-sized window */ | |
569 | link->io.NumPorts1 = info->multi * 8; | |
fba395ee | 570 | i = first_tuple(link, tuple, parse); |
1da177e4 LT |
571 | while (i != CS_NO_MORE_ITEMS) { |
572 | /* The quad port cards have bad CIS's, so just look for a | |
573 | window larger than 8 ports and assume it will be right */ | |
574 | if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && | |
575 | (cf->io.win[0].len > 8)) { | |
576 | link->conf.ConfigIndex = cf->index; | |
577 | link->io.BasePort1 = cf->io.win[0].base; | |
578 | link->io.IOAddrLines = | |
579 | cf->io.flags & CISTPL_IO_LINES_MASK; | |
fba395ee | 580 | i = pcmcia_request_io(link, &link->io); |
1da177e4 LT |
581 | base2 = link->io.BasePort1 + 8; |
582 | if (i == CS_SUCCESS) | |
583 | break; | |
584 | } | |
fba395ee | 585 | i = next_tuple(link, tuple, parse); |
1da177e4 LT |
586 | } |
587 | ||
588 | /* If that didn't work, look for two windows */ | |
589 | if (i != CS_SUCCESS) { | |
590 | link->io.NumPorts1 = link->io.NumPorts2 = 8; | |
591 | info->multi = 2; | |
fba395ee | 592 | i = first_tuple(link, tuple, parse); |
1da177e4 LT |
593 | while (i != CS_NO_MORE_ITEMS) { |
594 | if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) { | |
595 | link->conf.ConfigIndex = cf->index; | |
596 | link->io.BasePort1 = cf->io.win[0].base; | |
597 | link->io.BasePort2 = cf->io.win[1].base; | |
598 | link->io.IOAddrLines = | |
599 | cf->io.flags & CISTPL_IO_LINES_MASK; | |
fba395ee | 600 | i = pcmcia_request_io(link, &link->io); |
1da177e4 LT |
601 | base2 = link->io.BasePort2; |
602 | if (i == CS_SUCCESS) | |
603 | break; | |
604 | } | |
fba395ee | 605 | i = next_tuple(link, tuple, parse); |
1da177e4 LT |
606 | } |
607 | } | |
608 | ||
609 | if (i != CS_SUCCESS) { | |
fba395ee | 610 | cs_error(link, RequestIO, i); |
16f31113 YR |
611 | rc = -1; |
612 | goto free_cfg_mem; | |
1da177e4 LT |
613 | } |
614 | ||
fba395ee | 615 | i = pcmcia_request_irq(link, &link->irq); |
1da177e4 LT |
616 | if (i != CS_SUCCESS) { |
617 | printk(KERN_NOTICE | |
618 | "serial_cs: no usable port range found, giving up\n"); | |
fba395ee | 619 | cs_error(link, RequestIRQ, i); |
1da177e4 LT |
620 | link->irq.AssignedIRQ = 0; |
621 | } | |
efd92dfa RK |
622 | |
623 | /* | |
624 | * Apply any configuration quirks. | |
625 | */ | |
626 | if (info->quirk && info->quirk->config) | |
627 | info->quirk->config(link); | |
628 | ||
fba395ee | 629 | i = pcmcia_request_configuration(link, &link->conf); |
1da177e4 | 630 | if (i != CS_SUCCESS) { |
fba395ee | 631 | cs_error(link, RequestConfiguration, i); |
16f31113 YR |
632 | rc = -1; |
633 | goto free_cfg_mem; | |
1da177e4 LT |
634 | } |
635 | ||
636 | /* The Oxford Semiconductor OXCF950 cards are in fact single-port: | |
30bac7aa PV |
637 | * 8 registers are for the UART, the others are extra registers. |
638 | * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. | |
639 | */ | |
640 | if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && | |
641 | info->prodid == PRODID_POSSIO_GCC)) { | |
642 | int err; | |
643 | ||
1da177e4 | 644 | if (cf->index == 1 || cf->index == 3) { |
30bac7aa PV |
645 | err = setup_serial(link, info, base2, |
646 | link->irq.AssignedIRQ); | |
647 | base2 = link->io.BasePort1; | |
1da177e4 | 648 | } else { |
30bac7aa PV |
649 | err = setup_serial(link, info, link->io.BasePort1, |
650 | link->irq.AssignedIRQ); | |
1da177e4 | 651 | } |
30bac7aa | 652 | info->c950ctrl = base2; |
7ef057fa RK |
653 | |
654 | /* | |
655 | * FIXME: We really should wake up the port prior to | |
656 | * handing it over to the serial layer. | |
657 | */ | |
658 | if (info->quirk && info->quirk->wakeup) | |
659 | info->quirk->wakeup(link); | |
660 | ||
16f31113 YR |
661 | rc = 0; |
662 | goto free_cfg_mem; | |
1da177e4 LT |
663 | } |
664 | ||
fba395ee | 665 | setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); |
1da177e4 | 666 | /* The Nokia cards are not really multiport cards */ |
16f31113 YR |
667 | if (info->manfid == MANFID_NOKIA) { |
668 | rc = 0; | |
669 | goto free_cfg_mem; | |
670 | } | |
1da177e4 | 671 | for (i = 0; i < info->multi - 1; i++) |
fba395ee | 672 | setup_serial(link, info, base2 + (8 * i), |
16f31113 YR |
673 | link->irq.AssignedIRQ); |
674 | rc = 0; | |
675 | free_cfg_mem: | |
676 | kfree(cfg_mem); | |
677 | return rc; | |
1da177e4 LT |
678 | } |
679 | ||
680 | /*====================================================================== | |
681 | ||
682 | serial_config() is scheduled to run after a CARD_INSERTION event | |
683 | is received, to configure the PCMCIA socket, and to make the | |
684 | serial device available to the system. | |
685 | ||
686 | ======================================================================*/ | |
687 | ||
15b99ac1 | 688 | static int serial_config(struct pcmcia_device * link) |
1da177e4 | 689 | { |
1da177e4 | 690 | struct serial_info *info = link->priv; |
16f31113 YR |
691 | struct serial_cfg_mem *cfg_mem; |
692 | tuple_t *tuple; | |
693 | u_char *buf; | |
694 | cisparse_t *parse; | |
695 | cistpl_cftable_entry_t *cf; | |
1da177e4 LT |
696 | int i, last_ret, last_fn; |
697 | ||
698 | DEBUG(0, "serial_config(0x%p)\n", link); | |
699 | ||
16f31113 YR |
700 | cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); |
701 | if (!cfg_mem) | |
702 | goto failed; | |
703 | ||
704 | tuple = &cfg_mem->tuple; | |
705 | parse = &cfg_mem->parse; | |
706 | cf = &parse->cftable_entry; | |
707 | buf = cfg_mem->buf; | |
708 | ||
709 | tuple->TupleData = (cisdata_t *) buf; | |
710 | tuple->TupleOffset = 0; | |
711 | tuple->TupleDataMax = 255; | |
712 | tuple->Attributes = 0; | |
1da177e4 | 713 | /* Get configuration register information */ |
16f31113 | 714 | tuple->DesiredTuple = CISTPL_CONFIG; |
fba395ee | 715 | last_ret = first_tuple(link, tuple, parse); |
1da177e4 LT |
716 | if (last_ret != CS_SUCCESS) { |
717 | last_fn = ParseTuple; | |
718 | goto cs_failed; | |
719 | } | |
16f31113 YR |
720 | link->conf.ConfigBase = parse->config.base; |
721 | link->conf.Present = parse->config.rmask[0]; | |
1da177e4 | 722 | |
1da177e4 | 723 | /* Is this a compliant multifunction card? */ |
16f31113 YR |
724 | tuple->DesiredTuple = CISTPL_LONGLINK_MFC; |
725 | tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK; | |
fba395ee | 726 | info->multi = (first_tuple(link, tuple, parse) == CS_SUCCESS); |
1da177e4 LT |
727 | |
728 | /* Is this a multiport card? */ | |
16f31113 | 729 | tuple->DesiredTuple = CISTPL_MANFID; |
fba395ee | 730 | if (first_tuple(link, tuple, parse) == CS_SUCCESS) { |
f1fc3990 | 731 | info->manfid = parse->manfid.manf; |
43549ad7 | 732 | info->prodid = parse->manfid.card; |
a8244b56 | 733 | |
1fbbac4b | 734 | for (i = 0; i < ARRAY_SIZE(quirks); i++) |
a8244b56 RK |
735 | if ((quirks[i].manfid == ~0 || |
736 | quirks[i].manfid == info->manfid) && | |
737 | (quirks[i].prodid == ~0 || | |
738 | quirks[i].prodid == info->prodid)) { | |
1fbbac4b | 739 | info->quirk = &quirks[i]; |
1da177e4 | 740 | break; |
43549ad7 | 741 | } |
1da177e4 LT |
742 | } |
743 | ||
744 | /* Another check for dual-serial cards: look for either serial or | |
745 | multifunction cards that ask for appropriate IO port ranges */ | |
16f31113 | 746 | tuple->DesiredTuple = CISTPL_FUNCID; |
1da177e4 | 747 | if ((info->multi == 0) && |
fba395ee | 748 | ((first_tuple(link, tuple, parse) != CS_SUCCESS) || |
16f31113 YR |
749 | (parse->funcid.func == CISTPL_FUNCID_MULTI) || |
750 | (parse->funcid.func == CISTPL_FUNCID_SERIAL))) { | |
751 | tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
fba395ee | 752 | if (first_tuple(link, tuple, parse) == CS_SUCCESS) { |
1da177e4 LT |
753 | if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0)) |
754 | info->multi = cf->io.win[0].len >> 3; | |
755 | if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) && | |
756 | (cf->io.win[1].len == 8)) | |
757 | info->multi = 2; | |
758 | } | |
759 | } | |
760 | ||
1fbbac4b RK |
761 | /* |
762 | * Apply any multi-port quirk. | |
763 | */ | |
764 | if (info->quirk && info->quirk->multi != -1) | |
765 | info->multi = info->quirk->multi; | |
766 | ||
1da177e4 LT |
767 | if (info->multi > 1) |
768 | multi_config(link); | |
769 | else | |
770 | simple_config(link); | |
771 | ||
772 | if (info->ndev == 0) | |
773 | goto failed; | |
774 | ||
eee3a883 RK |
775 | /* |
776 | * Apply any post-init quirk. FIXME: This should really happen | |
777 | * before we register the port, since it might already be in use. | |
778 | */ | |
779 | if (info->quirk && info->quirk->post) | |
780 | if (info->quirk->post(link)) | |
781 | goto failed; | |
1da177e4 | 782 | |
fd238232 | 783 | link->dev_node = &info->node[0]; |
16f31113 | 784 | kfree(cfg_mem); |
15b99ac1 | 785 | return 0; |
1da177e4 LT |
786 | |
787 | cs_failed: | |
fba395ee | 788 | cs_error(link, last_fn, last_ret); |
1da177e4 LT |
789 | failed: |
790 | serial_remove(link); | |
16f31113 | 791 | kfree(cfg_mem); |
15b99ac1 | 792 | return -ENODEV; |
1da177e4 LT |
793 | } |
794 | ||
325aa29f DB |
795 | static struct pcmcia_device_id serial_ids[] = { |
796 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), | |
797 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), | |
798 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), | |
799 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), | |
800 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), | |
801 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), | |
802 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), | |
803 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), | |
804 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), | |
805 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), | |
806 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), | |
807 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), | |
f4d7510d JK |
808 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), |
809 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), | |
325aa29f DB |
810 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), |
811 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), | |
812 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), | |
813 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), | |
814 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), | |
815 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), | |
816 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), | |
817 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), | |
818 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), | |
d277ad0e | 819 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), |
325aa29f DB |
820 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), |
821 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), | |
822 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), | |
823 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), | |
824 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), | |
825 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), | |
d277ad0e K |
826 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), |
827 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), | |
325aa29f DB |
828 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), |
829 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), | |
830 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), | |
d277ad0e | 831 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), |
325aa29f DB |
832 | PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), |
833 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), | |
834 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), | |
835 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), | |
836 | PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), | |
837 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), | |
838 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), | |
839 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), | |
840 | PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), | |
841 | PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), | |
842 | PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), | |
1de9cedf | 843 | PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), |
325aa29f DB |
844 | PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), |
845 | PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), | |
846 | PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), | |
847 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), | |
848 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), | |
849 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), | |
850 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), | |
851 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), | |
852 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), | |
853 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), | |
854 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), | |
855 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), | |
856 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), | |
857 | PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), | |
858 | PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), | |
859 | PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), | |
860 | PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), | |
861 | PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), | |
1de9cedf | 862 | PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), |
325aa29f DB |
863 | PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), |
864 | PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), | |
865 | PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), | |
866 | PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), | |
867 | PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), | |
868 | PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), | |
869 | PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), | |
870 | PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), | |
d277ad0e | 871 | PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), |
325aa29f DB |
872 | PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), |
873 | PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), | |
874 | PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), | |
875 | PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), | |
876 | PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), | |
877 | PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), | |
878 | PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), | |
879 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"), | |
880 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"), | |
881 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"), | |
882 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"), | |
883 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"), | |
884 | PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"), | |
885 | PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"), | |
886 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "3CCFEM556.cis"), | |
887 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"), | |
888 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"), | |
889 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"), | |
a42f0dc4 | 890 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ |
f542ff6d DB |
891 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ |
892 | PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ | |
325aa29f DB |
893 | PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"), |
894 | PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"), | |
895 | PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"), | |
896 | PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "RS-COM-2P.cis"), | |
fec21889 | 897 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"), |
325aa29f DB |
898 | /* too generic */ |
899 | /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ | |
900 | /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ | |
901 | PCMCIA_DEVICE_FUNC_ID(2), | |
902 | PCMCIA_DEVICE_NULL, | |
903 | }; | |
904 | MODULE_DEVICE_TABLE(pcmcia, serial_ids); | |
905 | ||
1da177e4 LT |
906 | static struct pcmcia_driver serial_cs_driver = { |
907 | .owner = THIS_MODULE, | |
908 | .drv = { | |
909 | .name = "serial_cs", | |
910 | }, | |
f8cfa618 | 911 | .probe = serial_probe, |
cc3b4866 | 912 | .remove = serial_detach, |
325aa29f | 913 | .id_table = serial_ids, |
98e4c28b DB |
914 | .suspend = serial_suspend, |
915 | .resume = serial_resume, | |
1da177e4 LT |
916 | }; |
917 | ||
918 | static int __init init_serial_cs(void) | |
919 | { | |
920 | return pcmcia_register_driver(&serial_cs_driver); | |
921 | } | |
922 | ||
923 | static void __exit exit_serial_cs(void) | |
924 | { | |
925 | pcmcia_unregister_driver(&serial_cs_driver); | |
1da177e4 LT |
926 | } |
927 | ||
928 | module_init(init_serial_cs); | |
929 | module_exit(exit_serial_cs); | |
930 | ||
931 | MODULE_LICENSE("GPL"); |