Commit | Line | Data |
---|---|---|
8ae12a0d DB |
1 | # |
2 | # SPI driver configuration | |
3 | # | |
4 | # NOTE: the reason this doesn't show SPI slave support is mostly that | |
5 | # nobody's needed a slave side API yet. The master-role API is not | |
6 | # fully appropriate there, so it'd need some thought to do well. | |
7 | # | |
79d8c7a8 | 8 | menuconfig SPI |
8ae12a0d | 9 | bool "SPI support" |
79d8c7a8 | 10 | depends on HAS_IOMEM |
8ae12a0d DB |
11 | help |
12 | The "Serial Peripheral Interface" is a low level synchronous | |
13 | protocol. Chips that support SPI can have data transfer rates | |
14 | up to several tens of Mbit/sec. Chips are addressed with a | |
15 | controller and a chipselect. Most SPI slaves don't support | |
16 | dynamic device discovery; some are even write-only or read-only. | |
17 | ||
3cb2fccc | 18 | SPI is widely used by microcontrollers to talk with sensors, |
8ae12a0d DB |
19 | eeprom and flash memory, codecs and various other controller |
20 | chips, analog to digital (and d-to-a) converters, and more. | |
21 | MMC and SD cards can be accessed using SPI protocol; and for | |
22 | DataFlash cards used in MMC sockets, SPI must always be used. | |
23 | ||
24 | SPI is one of a family of similar protocols using a four wire | |
25 | interface (select, clock, data in, data out) including Microwire | |
26 | (half duplex), SSP, SSI, and PSP. This driver framework should | |
27 | work with most such devices and controllers. | |
28 | ||
79d8c7a8 AG |
29 | if SPI |
30 | ||
8ae12a0d | 31 | config SPI_DEBUG |
6341e62b | 32 | bool "Debug support for SPI drivers" |
79d8c7a8 | 33 | depends on DEBUG_KERNEL |
8ae12a0d DB |
34 | help |
35 | Say "yes" to enable debug messaging (like dev_dbg and pr_debug), | |
36 | sysfs, and debugfs support in SPI controller and protocol drivers. | |
37 | ||
38 | # | |
39 | # MASTER side ... talking to discrete SPI slave chips including microcontrollers | |
40 | # | |
41 | ||
42 | config SPI_MASTER | |
6341e62b CJ |
43 | # bool "SPI Master Support" |
44 | bool | |
8ae12a0d DB |
45 | default SPI |
46 | help | |
47 | If your system has an master-capable SPI controller (which | |
48 | provides the clock and chipselect), you can enable that | |
49 | controller and the protocol drivers for the SPI slave chips | |
50 | that are connected. | |
51 | ||
6291fe2a RD |
52 | if SPI_MASTER |
53 | ||
8ae12a0d | 54 | comment "SPI Master Controller Drivers" |
8ae12a0d | 55 | |
0b782531 TC |
56 | config SPI_ALTERA |
57 | tristate "Altera SPI Controller" | |
58 | select SPI_BITBANG | |
59 | help | |
60 | This is the driver for the Altera SPI Controller. | |
61 | ||
8efaef4d GJ |
62 | config SPI_ATH79 |
63 | tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver" | |
76ec9d18 | 64 | depends on ATH79 && GPIOLIB |
8efaef4d GJ |
65 | select SPI_BITBANG |
66 | help | |
67 | This enables support for the SPI controller present on the | |
68 | Atheros AR71XX/AR724X/AR913X SoCs. | |
69 | ||
754ce4f2 HS |
70 | config SPI_ATMEL |
71 | tristate "Atmel SPI Controller" | |
f59838a0 | 72 | depends on HAS_DMA |
dd1053a9 | 73 | depends on (ARCH_AT91 || AVR32 || COMPILE_TEST) |
754ce4f2 HS |
74 | help |
75 | This selects a driver for the Atmel SPI Controller, present on | |
76 | many AT32 (AVR32) and AT91 (ARM) chips. | |
77 | ||
e32bb870 MB |
78 | config SPI_AU1550 |
79 | tristate "Au1550/Au1200/Au1300 SPI Controller" | |
80 | depends on MIPS_ALCHEMY | |
81 | select SPI_BITBANG | |
82 | help | |
83 | If you say yes to this option, support will be included for the | |
84 | PSC SPI controller found on Au1550, Au1200 and Au1300 series. | |
85 | ||
b1353d1c LPC |
86 | config SPI_AXI_SPI_ENGINE |
87 | tristate "Analog Devices AXI SPI Engine controller" | |
88 | depends on HAS_IOMEM | |
89 | help | |
90 | This enables support for the Analog Devices AXI SPI Engine SPI controller. | |
91 | It is part of the SPI Engine framework that is used in some Analog Devices | |
92 | reference designs for FPGAs. | |
93 | ||
f8043872 CB |
94 | config SPI_BCM2835 |
95 | tristate "BCM2835 SPI controller" | |
e0d58cdc | 96 | depends on GPIOLIB |
dd1053a9 | 97 | depends on ARCH_BCM2835 || COMPILE_TEST |
f8043872 CB |
98 | help |
99 | This selects a driver for the Broadcom BCM2835 SPI master. | |
100 | ||
101 | The BCM2835 contains two types of SPI master controller; the | |
102 | "universal SPI master", and the regular SPI controller. This driver | |
103 | is for the regular SPI controller. Slave mode operation is not also | |
104 | not supported. | |
105 | ||
1ea29b39 MS |
106 | config SPI_BCM2835AUX |
107 | tristate "BCM2835 SPI auxiliary controller" | |
0697ae80 | 108 | depends on (ARCH_BCM2835 && GPIOLIB) || COMPILE_TEST |
1ea29b39 MS |
109 | help |
110 | This selects a driver for the Broadcom BCM2835 SPI aux master. | |
111 | ||
112 | The BCM2835 contains two types of SPI master controller; the | |
113 | "universal SPI master", and the regular SPI controller. | |
114 | This driver is for the universal/auxiliary SPI controller. | |
115 | ||
22ac3e82 | 116 | config SPI_BFIN5XX |
a5f6abd4 | 117 | tristate "SPI controller driver for ADI Blackfin5xx" |
fa4bd4f1 | 118 | depends on BLACKFIN && !BF60x |
a5f6abd4 WB |
119 | help |
120 | This is the SPI controller master driver for Blackfin 5xx processor. | |
121 | ||
766e3721 SJ |
122 | config SPI_ADI_V3 |
123 | tristate "SPI controller v3 for ADI" | |
fa4bd4f1 SJ |
124 | depends on BF60x |
125 | help | |
126 | This is the SPI controller v3 master driver | |
127 | found on Blackfin 60x processor. | |
128 | ||
9c3e7375 CC |
129 | config SPI_BFIN_SPORT |
130 | tristate "SPI bus via Blackfin SPORT" | |
131 | depends on BLACKFIN | |
132 | help | |
133 | Enable support for a SPI bus via the Blackfin SPORT peripheral. | |
134 | ||
0fc6a323 RM |
135 | config SPI_BCM53XX |
136 | tristate "Broadcom BCM53xx SPI controller" | |
137 | depends on ARCH_BCM_5301X | |
933fc7b0 AL |
138 | depends on BCMA_POSSIBLE |
139 | select BCMA | |
0fc6a323 RM |
140 | help |
141 | Enable support for the SPI controller on Broadcom BCM53xx ARM SoCs. | |
142 | ||
b42dfed8 FF |
143 | config SPI_BCM63XX |
144 | tristate "Broadcom BCM63xx SPI controller" | |
44d8fb30 | 145 | depends on BCM63XX || COMPILE_TEST |
b42dfed8 FF |
146 | help |
147 | Enable support for the SPI controller on the Broadcom BCM63xx SoCs. | |
148 | ||
142168eb JG |
149 | config SPI_BCM63XX_HSSPI |
150 | tristate "Broadcom BCM63XX HS SPI controller driver" | |
151 | depends on BCM63XX || COMPILE_TEST | |
152 | help | |
153 | This enables support for the High Speed SPI controller present on | |
154 | newer Broadcom BCM63XX SoCs. | |
155 | ||
9904f22a | 156 | config SPI_BITBANG |
d29389de | 157 | tristate "Utilities for Bitbanging SPI masters" |
9904f22a DB |
158 | help |
159 | With a few GPIO pins, your system can bitbang the SPI protocol. | |
160 | Select this to get SPI support through I/O pins (GPIO, parallel | |
161 | port, etc). Or, some systems' SPI master controller drivers use | |
162 | this code to manage the per-word or per-transfer accesses to the | |
163 | hardware shift registers. | |
164 | ||
165 | This is library code, and is automatically selected by drivers that | |
166 | need it. You only need to select this explicitly to support driver | |
167 | modules that aren't part of this kernel tree. | |
8ae12a0d | 168 | |
7111763d DB |
169 | config SPI_BUTTERFLY |
170 | tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)" | |
6291fe2a | 171 | depends on PARPORT |
7111763d DB |
172 | select SPI_BITBANG |
173 | help | |
174 | This uses a custom parallel port cable to connect to an AVR | |
175 | Butterfly <http://www.atmel.com/products/avr/butterfly>, an | |
176 | inexpensive battery powered microcontroller evaluation board. | |
177 | This same cable can be used to flash new firmware. | |
178 | ||
c474b386 HK |
179 | config SPI_CADENCE |
180 | tristate "Cadence SPI controller" | |
c474b386 HK |
181 | help |
182 | This selects the Cadence SPI controller master driver | |
38b6484e | 183 | used by Xilinx Zynq and ZynqMP. |
c474b386 | 184 | |
161b96c3 AS |
185 | config SPI_CLPS711X |
186 | tristate "CLPS711X host SPI controller" | |
5634dd8b | 187 | depends on ARCH_CLPS711X || COMPILE_TEST |
161b96c3 AS |
188 | help |
189 | This enables dedicated general purpose SPI/Microwire1-compatible | |
190 | master mode interface (SSI1) for CLPS711X-based CPUs. | |
191 | ||
34b8c661 SK |
192 | config SPI_COLDFIRE_QSPI |
193 | tristate "Freescale Coldfire QSPI controller" | |
bce4d12b | 194 | depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x) |
34b8c661 SK |
195 | help |
196 | This enables support for the Coldfire QSPI controller in master | |
197 | mode. | |
198 | ||
358934a6 | 199 | config SPI_DAVINCI |
23ce17ad | 200 | tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller" |
78848914 | 201 | depends on ARCH_DAVINCI || ARCH_KEYSTONE |
358934a6 SP |
202 | select SPI_BITBANG |
203 | help | |
23ce17ad SN |
204 | SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules. |
205 | ||
e32bb870 MB |
206 | config SPI_DESIGNWARE |
207 | tristate "DesignWare SPI controller core support" | |
208 | help | |
209 | general driver for SPI controller core from DesignWare | |
210 | ||
211 | config SPI_DW_PCI | |
212 | tristate "PCI interface driver for DW SPI core" | |
213 | depends on SPI_DESIGNWARE && PCI | |
214 | ||
215 | config SPI_DW_MID_DMA | |
216 | bool "DMA support for DW SPI controller on Intel MID platform" | |
217 | depends on SPI_DW_PCI && DW_DMAC_PCI | |
218 | ||
219 | config SPI_DW_MMIO | |
220 | tristate "Memory-mapped io interface driver for DW SPI core" | |
221 | depends on SPI_DESIGNWARE | |
222 | ||
3d8c0d74 LP |
223 | config SPI_DLN2 |
224 | tristate "Diolan DLN-2 USB SPI adapter" | |
225 | depends on MFD_DLN2 | |
226 | help | |
227 | If you say yes to this option, support will be included for Diolan | |
228 | DLN2, a USB to SPI interface. | |
229 | ||
230 | This driver can also be built as a module. If so, the module | |
231 | will be called spi-dln2. | |
232 | ||
86f8973c UKK |
233 | config SPI_EFM32 |
234 | tristate "EFM32 SPI controller" | |
235 | depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST) | |
236 | select SPI_BITBANG | |
237 | help | |
238 | Driver for the spi controller found on Energy Micro's EFM32 SoCs. | |
239 | ||
011f23a3 MW |
240 | config SPI_EP93XX |
241 | tristate "Cirrus Logic EP93xx SPI controller" | |
f59838a0 | 242 | depends on HAS_DMA |
dd1053a9 | 243 | depends on ARCH_EP93XX || COMPILE_TEST |
011f23a3 MW |
244 | help |
245 | This enables using the Cirrus EP93xx SPI controller in master | |
246 | mode. | |
247 | ||
6cd3c7e2 TL |
248 | config SPI_FALCON |
249 | tristate "Falcon SPI controller support" | |
250 | depends on SOC_FALCON | |
251 | help | |
252 | The external bus unit (EBU) found on the FALC-ON SoC has SPI | |
253 | emulation that is designed for serial flash access. This driver | |
254 | has only been tested with m25p80 type chips. The hardware has no | |
255 | support for other types of SPI peripherals. | |
256 | ||
d29389de DB |
257 | config SPI_GPIO |
258 | tristate "GPIO-based bitbanging SPI Master" | |
5c2301a9 | 259 | depends on GPIOLIB || COMPILE_TEST |
d29389de DB |
260 | select SPI_BITBANG |
261 | help | |
262 | This simple GPIO bitbanging SPI master uses the arch-neutral GPIO | |
263 | interface to manage MOSI, MISO, SCK, and chipselect signals. SPI | |
264 | slaves connected to a bus using this driver are configured as usual, | |
265 | except that the spi_board_info.controller_data holds the GPIO number | |
266 | for the chipselect used by this controller driver. | |
267 | ||
268 | Note that this driver often won't achieve even 1 Mbit/sec speeds, | |
269 | making it unusually slow for SPI. If your platform can inline | |
270 | GPIO operations, you should be able to leverage that for better | |
271 | speed with a custom version of this driver; see the source code. | |
272 | ||
deba2580 AB |
273 | config SPI_IMG_SPFI |
274 | tristate "IMG SPFI controller" | |
275 | depends on MIPS || COMPILE_TEST | |
276 | help | |
277 | This enables support for the SPFI master controller found on | |
278 | IMG SoCs. | |
279 | ||
b5f3294f SH |
280 | config SPI_IMX |
281 | tristate "Freescale i.MX SPI controllers" | |
dd1053a9 | 282 | depends on ARCH_MXC || COMPILE_TEST |
b5f3294f SH |
283 | select SPI_BITBANG |
284 | help | |
285 | This enables using the Freescale i.MX SPI controllers in master | |
286 | mode. | |
287 | ||
78961a57 KB |
288 | config SPI_LM70_LLP |
289 | tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" | |
6d1f56aa | 290 | depends on PARPORT |
78961a57 KB |
291 | select SPI_BITBANG |
292 | help | |
293 | This driver supports the NS LM70 LLP Evaluation Board, | |
294 | which interfaces to an LM70 temperature sensor using | |
295 | a parallel port. | |
296 | ||
7ecbfff6 SI |
297 | config SPI_LP8841_RTC |
298 | tristate "ICP DAS LP-8841 SPI Controller for RTC" | |
299 | depends on MACH_PXA27X_DT || COMPILE_TEST | |
300 | help | |
301 | This driver provides an SPI master device to drive Maxim | |
302 | DS-1302 real time clock. | |
303 | ||
304 | Say N here unless you plan to run the kernel on an ICP DAS | |
305 | LP-8x4x industrial computer. | |
306 | ||
42bbb709 GL |
307 | config SPI_MPC52xx |
308 | tristate "Freescale MPC52xx SPI (non-PSC) controller support" | |
7433f2b7 | 309 | depends on PPC_MPC52xx |
42bbb709 GL |
310 | help |
311 | This drivers supports the MPC52xx SPI controller in master SPI | |
312 | mode. | |
313 | ||
00b8fd23 DC |
314 | config SPI_MPC52xx_PSC |
315 | tristate "Freescale MPC52xx PSC SPI controller" | |
6d1f56aa | 316 | depends on PPC_MPC52xx |
00b8fd23 DC |
317 | help |
318 | This enables using the Freescale MPC52xx Programmable Serial | |
319 | Controller in master SPI mode. | |
320 | ||
6e27388f AG |
321 | config SPI_MPC512x_PSC |
322 | tristate "Freescale MPC512x PSC SPI controller" | |
5e8afa34 | 323 | depends on PPC_MPC512x |
6e27388f AG |
324 | help |
325 | This enables using the Freescale MPC5121 Programmable Serial | |
326 | Controller in SPI master mode. | |
327 | ||
b36ece83 | 328 | config SPI_FSL_LIB |
e8beacbb AL |
329 | tristate |
330 | depends on OF | |
331 | ||
332 | config SPI_FSL_CPM | |
b36ece83 MH |
333 | tristate |
334 | depends on FSL_SOC | |
335 | ||
3272029f | 336 | config SPI_FSL_SPI |
38455d7a | 337 | tristate "Freescale SPI controller and Aeroflex Gaisler GRLIB SPI controller" |
e8beacbb | 338 | depends on OF |
b36ece83 | 339 | select SPI_FSL_LIB |
e8beacbb | 340 | select SPI_FSL_CPM if FSL_SOC |
ccf06998 | 341 | help |
3272029f MH |
342 | This enables using the Freescale SPI controllers in master mode. |
343 | MPC83xx platform uses the controller in cpu mode or CPM/QE mode. | |
344 | MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. | |
447b0c7b AL |
345 | This also enables using the Aeroflex Gaisler GRLIB SPI controller in |
346 | master mode. | |
ccf06998 | 347 | |
349ad66c CF |
348 | config SPI_FSL_DSPI |
349 | tristate "Freescale DSPI controller" | |
1acbdeb9 | 350 | select REGMAP_MMIO |
5a60adaf | 351 | depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST |
349ad66c CF |
352 | help |
353 | This enables support for the Freescale DSPI controller in master | |
354 | mode. VF610 platform uses the controller. | |
355 | ||
8b60d6c2 | 356 | config SPI_FSL_ESPI |
38455d7a | 357 | tristate "Freescale eSPI controller" |
8b60d6c2 MH |
358 | depends on FSL_SOC |
359 | select SPI_FSL_LIB | |
360 | help | |
361 | This enables using the Freescale eSPI controllers in master mode. | |
362 | From MPC8536, 85xx platform uses the controller, and all P10xx, | |
363 | P20xx, P30xx,P40xx, P50xx uses this controller. | |
364 | ||
c3e4bc54 BG |
365 | config SPI_MESON_SPIFC |
366 | tristate "Amlogic Meson SPIFC controller" | |
367 | depends on ARCH_MESON || COMPILE_TEST | |
1327ecd4 | 368 | select REGMAP_MMIO |
c3e4bc54 BG |
369 | help |
370 | This enables master mode support for the SPIFC (SPI flash | |
371 | controller) available in Amlogic Meson SoCs. | |
372 | ||
a568231f LL |
373 | config SPI_MT65XX |
374 | tristate "MediaTek SPI controller" | |
375 | depends on ARCH_MEDIATEK || COMPILE_TEST | |
376 | help | |
377 | This selects the MediaTek(R) SPI bus driver. | |
378 | If you want to use MediaTek(R) SPI interface, | |
379 | say Y or M here.If you are not sure, say N. | |
380 | SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs. | |
381 | ||
e32bb870 MB |
382 | config SPI_NUC900 |
383 | tristate "Nuvoton NUC900 series SPI" | |
384 | depends on ARCH_W90X900 | |
385 | select SPI_BITBANG | |
386 | help | |
387 | SPI driver for Nuvoton NUC900 series ARM SoCs | |
388 | ||
ce792580 TC |
389 | config SPI_OC_TINY |
390 | tristate "OpenCores tiny SPI" | |
5c2301a9 | 391 | depends on GPIOLIB || COMPILE_TEST |
ce792580 TC |
392 | select SPI_BITBANG |
393 | help | |
394 | This is the driver for OpenCores tiny SPI master controller. | |
395 | ||
6b52c00f DD |
396 | config SPI_OCTEON |
397 | tristate "Cavium OCTEON SPI controller" | |
9ddebc46 | 398 | depends on CAVIUM_OCTEON_SOC |
6b52c00f DD |
399 | help |
400 | SPI host driver for the hardware found on some Cavium OCTEON | |
401 | SOCs. | |
402 | ||
fdb3c18d DB |
403 | config SPI_OMAP_UWIRE |
404 | tristate "OMAP1 MicroWire" | |
6291fe2a | 405 | depends on ARCH_OMAP1 |
fdb3c18d DB |
406 | select SPI_BITBANG |
407 | help | |
408 | This hooks up to the MicroWire controller on OMAP1 chips. | |
409 | ||
ccdc7bf9 | 410 | config SPI_OMAP24XX |
8ebeb545 | 411 | tristate "McSPI driver for OMAP" |
f59838a0 | 412 | depends on HAS_DMA |
dd1053a9 | 413 | depends on ARCH_OMAP2PLUS || COMPILE_TEST |
2b32e987 | 414 | select SG_SPLIT |
ccdc7bf9 | 415 | help |
8ebeb545 | 416 | SPI master controller for OMAP24XX and later Multichannel SPI |
ccdc7bf9 | 417 | (McSPI) modules. |
69c202af | 418 | |
505a1495 SP |
419 | config SPI_TI_QSPI |
420 | tristate "DRA7xxx QSPI controller support" | |
421 | depends on ARCH_OMAP2PLUS || COMPILE_TEST | |
422 | help | |
423 | QSPI master controller for DRA7xxx used for flash devices. | |
424 | This device supports single, dual and quad read support, while | |
425 | it only supports single write mode. | |
426 | ||
35c9049b CM |
427 | config SPI_OMAP_100K |
428 | tristate "OMAP SPI 100K" | |
dd1053a9 | 429 | depends on ARCH_OMAP850 || ARCH_OMAP730 || COMPILE_TEST |
35c9049b CM |
430 | help |
431 | OMAP SPI 100K master controller for omap7xx boards. | |
432 | ||
60cadec9 | 433 | config SPI_ORION |
6d1f56aa | 434 | tristate "Orion SPI master" |
710a1d54 | 435 | depends on PLAT_ORION || ARCH_MVEBU || COMPILE_TEST |
60cadec9 SA |
436 | help |
437 | This enables using the SPI master controller on the Orion chips. | |
438 | ||
1bcb9f8c PCM |
439 | config SPI_PIC32 |
440 | tristate "Microchip PIC32 series SPI" | |
441 | depends on MACH_PIC32 || COMPILE_TEST | |
442 | help | |
443 | SPI driver for Microchip PIC32 SPI master controller. | |
444 | ||
3270ac23 PCM |
445 | config SPI_PIC32_SQI |
446 | tristate "Microchip PIC32 Quad SPI driver" | |
447 | depends on MACH_PIC32 || COMPILE_TEST | |
21825ff1 | 448 | depends on HAS_DMA |
3270ac23 PCM |
449 | help |
450 | SPI driver for PIC32 Quad SPI controller. | |
451 | ||
b43d65f7 | 452 | config SPI_PL022 |
7f9a4b97 LW |
453 | tristate "ARM AMBA PL022 SSP controller" |
454 | depends on ARM_AMBA | |
b43d65f7 | 455 | default y if MACH_U300 |
f33b29ee | 456 | default y if ARCH_REALVIEW |
457 | default y if INTEGRATOR_IMPD1 | |
458 | default y if ARCH_VERSATILE | |
b43d65f7 LW |
459 | help |
460 | This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP | |
461 | controller. If you have an embedded system with an AMBA(R) | |
462 | bus and a PL022 controller, say Y or M here. | |
463 | ||
44dab88e SF |
464 | config SPI_PPC4xx |
465 | tristate "PPC4xx SPI Controller" | |
5e8afa34 | 466 | depends on PPC32 && 4xx |
44dab88e SF |
467 | select SPI_BITBANG |
468 | help | |
469 | This selects a driver for the PPC4xx SPI Controller. | |
470 | ||
e0c9905e SS |
471 | config SPI_PXA2XX |
472 | tristate "PXA2xx SSP SPI master" | |
0244ad00 | 473 | depends on (ARCH_PXA || PCI || ACPI) |
d6ea3df0 | 474 | select PXA_SSP if ARCH_PXA |
e0c9905e | 475 | help |
d6ea3df0 SAS |
476 | This enables using a PXA2xx or Sodaville SSP port as a SPI master |
477 | controller. The driver can be configured to use any SSP port and | |
478 | additional documentation can be found a Documentation/spi/pxa2xx. | |
479 | ||
480 | config SPI_PXA2XX_PCI | |
afa93c90 | 481 | def_tristate SPI_PXA2XX && PCI && COMMON_CLK |
e0c9905e | 482 | |
64e36824 | 483 | config SPI_ROCKCHIP |
484 | tristate "Rockchip SPI controller driver" | |
485 | help | |
486 | This selects a driver for Rockchip SPI controller. | |
487 | ||
488 | If you say yes to this option, support will be included for | |
489 | RK3066, RK3188 and RK3288 families of SPI controller. | |
490 | Rockchip SPI controller support DMA transport and PIO mode. | |
491 | The main usecase of this controller is to use spi flash as boot | |
492 | device. | |
493 | ||
05aec357 BV |
494 | config SPI_RB4XX |
495 | tristate "Mikrotik RB4XX SPI master" | |
496 | depends on SPI_MASTER && ATH79 | |
497 | help | |
498 | SPI controller driver for the Mikrotik RB4xx series boards. | |
499 | ||
0b2182dd | 500 | config SPI_RSPI |
e290c343 | 501 | tristate "Renesas RSPI/QSPI controller" |
3aec3166 | 502 | depends on SUPERH || ARCH_RENESAS || COMPILE_TEST |
0b2182dd | 503 | help |
e290c343 | 504 | SPI driver for Renesas RSPI and QSPI blocks. |
0b2182dd | 505 | |
64ff247a II |
506 | config SPI_QUP |
507 | tristate "Qualcomm SPI controller with QUP interface" | |
058f11c8 | 508 | depends on ARCH_QCOM || (ARM && COMPILE_TEST) |
64ff247a II |
509 | help |
510 | Qualcomm Universal Peripheral (QUP) core is an AHB slave that | |
511 | provides a common data path (an output FIFO and an input FIFO) | |
512 | for serial peripheral interface (SPI) mini-core. SPI in master | |
513 | mode supports up to 50MHz, up to four chip selects, programmable | |
514 | data path from 4 bits to 32 bits and numerous protocol variants. | |
515 | ||
516 | This driver can also be built as a module. If so, the module | |
517 | will be called spi_qup. | |
0b2182dd | 518 | |
85abfaa7 DB |
519 | config SPI_S3C24XX |
520 | tristate "Samsung S3C24XX series SPI" | |
6d1f56aa | 521 | depends on ARCH_S3C24XX |
da0abc27 | 522 | select SPI_BITBANG |
85abfaa7 DB |
523 | help |
524 | SPI driver for Samsung S3C24XX series ARM SoCs | |
525 | ||
bec0806c BD |
526 | config SPI_S3C24XX_FIQ |
527 | bool "S3C24XX driver with FIQ pseudo-DMA" | |
528 | depends on SPI_S3C24XX | |
529 | select FIQ | |
530 | help | |
531 | Enable FIQ support for the S3C24XX SPI driver to provide pseudo | |
532 | DMA by using the fast-interrupt request framework, This allows | |
533 | the driver to get DMA-like performance when there are either | |
534 | no free DMA channels, or when doing transfers that required both | |
535 | TX and RX data paths. | |
536 | ||
230d42d4 JB |
537 | config SPI_S3C64XX |
538 | tristate "Samsung S3C64XX series type SPI" | |
bf77cba9 | 539 | depends on (PLAT_SAMSUNG || ARCH_EXYNOS) |
230d42d4 JB |
540 | help |
541 | SPI driver for Samsung S3C64XX and newer SoCs. | |
542 | ||
3ce8859e GR |
543 | config SPI_SC18IS602 |
544 | tristate "NXP SC18IS602/602B/603 I2C to SPI bridge" | |
545 | depends on I2C | |
546 | help | |
547 | SPI driver for NXP SC18IS602/602B/603 I2C to SPI bridge. | |
548 | ||
8051effc MD |
549 | config SPI_SH_MSIOF |
550 | tristate "SuperH MSIOF SPI controller" | |
51fd5090 | 551 | depends on HAVE_CLK && HAS_DMA |
3aec3166 | 552 | depends on SUPERH || ARCH_RENESAS || COMPILE_TEST |
8051effc | 553 | help |
746aeffd | 554 | SPI driver for SuperH and SH Mobile MSIOF blocks. |
8051effc | 555 | |
5c05dd07 YS |
556 | config SPI_SH |
557 | tristate "SuperH SPI controller" | |
dd1053a9 | 558 | depends on SUPERH || COMPILE_TEST |
5c05dd07 YS |
559 | help |
560 | SPI driver for SuperH SPI blocks. | |
561 | ||
37e46640 MD |
562 | config SPI_SH_SCI |
563 | tristate "SuperH SCI SPI controller" | |
6291fe2a | 564 | depends on SUPERH |
37e46640 MD |
565 | select SPI_BITBANG |
566 | help | |
567 | SPI driver for SuperH SCI blocks. | |
568 | ||
d1c8bbd7 KM |
569 | config SPI_SH_HSPI |
570 | tristate "SuperH HSPI controller" | |
3aec3166 | 571 | depends on ARCH_RENESAS || COMPILE_TEST |
d1c8bbd7 KM |
572 | help |
573 | SPI driver for SuperH HSPI blocks. | |
574 | ||
1cc2df9d ZS |
575 | config SPI_SIRF |
576 | tristate "CSR SiRFprimaII SPI controller" | |
7668c294 | 577 | depends on SIRF_DMA |
1cc2df9d ZS |
578 | select SPI_BITBANG |
579 | help | |
580 | SPI driver for CSR SiRFprimaII SoCs | |
581 | ||
9e862375 LJ |
582 | config SPI_ST_SSC4 |
583 | tristate "STMicroelectronics SPI SSC-based driver" | |
83fefd2d | 584 | depends on ARCH_STI || COMPILE_TEST |
9e862375 LJ |
585 | help |
586 | STMicroelectronics SoCs support for SPI. If you say yes to | |
587 | this option, support will be included for the SSC driven SPI. | |
588 | ||
b5f65179 MR |
589 | config SPI_SUN4I |
590 | tristate "Allwinner A10 SoCs SPI controller" | |
591 | depends on ARCH_SUNXI || COMPILE_TEST | |
592 | help | |
593 | SPI driver for Allwinner sun4i, sun5i and sun7i SoCs | |
594 | ||
3558fe90 MR |
595 | config SPI_SUN6I |
596 | tristate "Allwinner A31 SPI controller" | |
597 | depends on ARCH_SUNXI || COMPILE_TEST | |
7961656a | 598 | depends on RESET_CONTROLLER |
3558fe90 MR |
599 | help |
600 | This enables using the SPI controller on the Allwinner A31 SoCs. | |
601 | ||
646781d3 MV |
602 | config SPI_MXS |
603 | tristate "Freescale MXS SPI controller" | |
604 | depends on ARCH_MXS | |
605 | select STMP_DEVICE | |
606 | help | |
607 | SPI driver for Freescale MXS devices. | |
608 | ||
f333a331 LD |
609 | config SPI_TEGRA114 |
610 | tristate "NVIDIA Tegra114 SPI Controller" | |
dd1053a9 | 611 | depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST |
f59838a0 | 612 | depends on RESET_CONTROLLER && HAS_DMA |
f333a331 LD |
613 | help |
614 | SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller | |
615 | is different than the older SoCs SPI controller and also register interface | |
616 | get changed with this controller. | |
617 | ||
8528547b LD |
618 | config SPI_TEGRA20_SFLASH |
619 | tristate "Nvidia Tegra20 Serial flash Controller" | |
dd1053a9 | 620 | depends on ARCH_TEGRA || COMPILE_TEST |
ff2251e3 | 621 | depends on RESET_CONTROLLER |
8528547b LD |
622 | help |
623 | SPI driver for Nvidia Tegra20 Serial flash Controller interface. | |
624 | The main usecase of this controller is to use spi flash as boot | |
625 | device. | |
626 | ||
dc4dc360 LD |
627 | config SPI_TEGRA20_SLINK |
628 | tristate "Nvidia Tegra20/Tegra30 SLINK Controller" | |
dd1053a9 | 629 | depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST |
f59838a0 | 630 | depends on RESET_CONTROLLER && HAS_DMA |
dc4dc360 LD |
631 | help |
632 | SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface. | |
633 | ||
e8b17b5b | 634 | config SPI_TOPCLIFF_PCH |
92b3a5c1 | 635 | tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI" |
f05ca854 | 636 | depends on PCI && (X86_32 || MIPS || COMPILE_TEST) |
e8b17b5b | 637 | help |
cdbc8f04 GL |
638 | SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus |
639 | used in some x86 embedded processors. | |
e8b17b5b | 640 | |
92b3a5c1 TM |
641 | This driver also supports the ML7213/ML7223/ML7831, a companion chip |
642 | for the Atom E6xx series and compatible with the Intel EG20T PCH. | |
f016aeb6 | 643 | |
f2cac67d AN |
644 | config SPI_TXX9 |
645 | tristate "Toshiba TXx9 SPI controller" | |
dd1053a9 | 646 | depends on GPIOLIB && (CPU_TX49XX || COMPILE_TEST) |
f2cac67d AN |
647 | help |
648 | SPI driver for Toshiba TXx9 MIPS SoCs | |
649 | ||
b3165900 LPC |
650 | config SPI_XCOMM |
651 | tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver" | |
652 | depends on I2C | |
653 | help | |
654 | Support for the SPI-I2C bridge found on the Analog Devices | |
655 | AD-FMCOMMS1-EBZ board. | |
656 | ||
ae918c02 | 657 | config SPI_XILINX |
c9da2e12 | 658 | tristate "Xilinx SPI controller common module" |
6d1f56aa | 659 | depends on HAS_IOMEM |
ae918c02 AK |
660 | select SPI_BITBANG |
661 | help | |
662 | This exposes the SPI controller IP from the Xilinx EDK. | |
663 | ||
664 | See the "OPB Serial Peripheral Interface (SPI) (v1.00e)" | |
665 | Product Specification document (DS464) for hardware details. | |
666 | ||
c9da2e12 RR |
667 | Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)" |
668 | ||
d8c80d49 KP |
669 | config SPI_XLP |
670 | tristate "Netlogic XLP SPI controller driver" | |
bf23d191 | 671 | depends on CPU_XLP || ARCH_VULCAN || COMPILE_TEST |
d8c80d49 KP |
672 | help |
673 | Enable support for the SPI controller on the Netlogic XLP SoCs. | |
674 | Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, XLP9XX | |
675 | and XLP5XX. | |
676 | ||
677 | If you have a Netlogic XLP platform say Y here. | |
678 | If unsure, say N. | |
679 | ||
6840cc29 MF |
680 | config SPI_XTENSA_XTFPGA |
681 | tristate "Xtensa SPI controller for xtfpga" | |
be8dde46 | 682 | depends on (XTENSA && XTENSA_PLATFORM_XTFPGA) || COMPILE_TEST |
6840cc29 MF |
683 | select SPI_BITBANG |
684 | help | |
685 | SPI driver for xtfpga SPI master controller. | |
686 | ||
687 | This simple SPI master controller is built into xtfpga bitstreams | |
688 | and is used to control daughterboard audio codec. It always transfers | |
689 | 16 bit words in SPI mode 0, automatically asserting CS on transfer | |
690 | start and deasserting on end. | |
691 | ||
dfe11a11 RW |
692 | config SPI_ZYNQMP_GQSPI |
693 | tristate "Xilinx ZynqMP GQSPI controller" | |
2e1c75f4 | 694 | depends on SPI_MASTER && HAS_DMA |
dfe11a11 RW |
695 | help |
696 | Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC. | |
697 | ||
8ae12a0d DB |
698 | # |
699 | # Add new SPI master controllers in alphabetical order above this line | |
700 | # | |
701 | ||
8ae12a0d DB |
702 | # |
703 | # There are lots of SPI device types, with sensors and memory | |
704 | # being probably the most widely used ones. | |
705 | # | |
706 | comment "SPI Protocol Masters" | |
8ae12a0d | 707 | |
814a8d50 AP |
708 | config SPI_SPIDEV |
709 | tristate "User mode SPI device driver support" | |
814a8d50 AP |
710 | help |
711 | This supports user mode SPI protocol drivers. | |
712 | ||
713 | Note that this application programming interface is EXPERIMENTAL | |
714 | and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes. | |
715 | ||
97896195 MS |
716 | config SPI_LOOPBACK_TEST |
717 | tristate "spi loopback test framework support" | |
718 | depends on m | |
719 | help | |
720 | This enables the SPI loopback testing framework driver | |
721 | ||
722 | primarily used for development of spi_master drivers | |
723 | and to detect regressions | |
724 | ||
447aef1a BD |
725 | config SPI_TLE62X0 |
726 | tristate "Infineon TLE62X0 (for power switching)" | |
6291fe2a | 727 | depends on SYSFS |
447aef1a BD |
728 | help |
729 | SPI driver for Infineon TLE62X0 series line driver chips, | |
730 | such as the TLE6220, TLE6230 and TLE6240. This provides a | |
731 | sysfs interface, with each line presented as a kind of GPIO | |
732 | exposing both switch control and diagnostic feedback. | |
733 | ||
8ae12a0d DB |
734 | # |
735 | # Add new SPI protocol masters in alphabetical order above this line | |
736 | # | |
737 | ||
6291fe2a RD |
738 | endif # SPI_MASTER |
739 | ||
8ae12a0d DB |
740 | # (slave support would go here) |
741 | ||
79d8c7a8 | 742 | endif # SPI |