Commit | Line | Data |
---|---|---|
8ae12a0d | 1 | /* |
ca632f55 | 2 | * SPI init/core code |
8ae12a0d DB |
3 | * |
4 | * Copyright (C) 2005 David Brownell | |
d57a4282 | 5 | * Copyright (C) 2008 Secret Lab Technologies Ltd. |
8ae12a0d DB |
6 | * |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; if not, write to the Free Software | |
19 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
20 | */ | |
21 | ||
8ae12a0d | 22 | #include <linux/kernel.h> |
d57a4282 | 23 | #include <linux/kmod.h> |
8ae12a0d DB |
24 | #include <linux/device.h> |
25 | #include <linux/init.h> | |
26 | #include <linux/cache.h> | |
99adef31 MB |
27 | #include <linux/dma-mapping.h> |
28 | #include <linux/dmaengine.h> | |
94040828 | 29 | #include <linux/mutex.h> |
2b7a32f7 | 30 | #include <linux/of_device.h> |
d57a4282 | 31 | #include <linux/of_irq.h> |
5a0e3ad6 | 32 | #include <linux/slab.h> |
e0626e38 | 33 | #include <linux/mod_devicetable.h> |
8ae12a0d | 34 | #include <linux/spi/spi.h> |
74317984 | 35 | #include <linux/of_gpio.h> |
3ae22e8c | 36 | #include <linux/pm_runtime.h> |
025ed130 | 37 | #include <linux/export.h> |
8bd75c77 | 38 | #include <linux/sched/rt.h> |
ffbbdd21 LW |
39 | #include <linux/delay.h> |
40 | #include <linux/kthread.h> | |
64bee4d2 MW |
41 | #include <linux/ioport.h> |
42 | #include <linux/acpi.h> | |
8ae12a0d | 43 | |
56ec1978 MB |
44 | #define CREATE_TRACE_POINTS |
45 | #include <trace/events/spi.h> | |
46 | ||
8ae12a0d DB |
47 | static void spidev_release(struct device *dev) |
48 | { | |
0ffa0285 | 49 | struct spi_device *spi = to_spi_device(dev); |
8ae12a0d DB |
50 | |
51 | /* spi masters may cleanup for released devices */ | |
52 | if (spi->master->cleanup) | |
53 | spi->master->cleanup(spi); | |
54 | ||
0c868461 | 55 | spi_master_put(spi->master); |
07a389fe | 56 | kfree(spi); |
8ae12a0d DB |
57 | } |
58 | ||
59 | static ssize_t | |
60 | modalias_show(struct device *dev, struct device_attribute *a, char *buf) | |
61 | { | |
62 | const struct spi_device *spi = to_spi_device(dev); | |
8c4ff6d0 ZR |
63 | int len; |
64 | ||
65 | len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1); | |
66 | if (len != -ENODEV) | |
67 | return len; | |
8ae12a0d | 68 | |
d8e328b3 | 69 | return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias); |
8ae12a0d | 70 | } |
aa7da564 | 71 | static DEVICE_ATTR_RO(modalias); |
8ae12a0d | 72 | |
aa7da564 GKH |
73 | static struct attribute *spi_dev_attrs[] = { |
74 | &dev_attr_modalias.attr, | |
75 | NULL, | |
8ae12a0d | 76 | }; |
aa7da564 | 77 | ATTRIBUTE_GROUPS(spi_dev); |
8ae12a0d DB |
78 | |
79 | /* modalias support makes "modprobe $MODALIAS" new-style hotplug work, | |
80 | * and the sysfs version makes coldplug work too. | |
81 | */ | |
82 | ||
75368bf6 AV |
83 | static const struct spi_device_id *spi_match_id(const struct spi_device_id *id, |
84 | const struct spi_device *sdev) | |
85 | { | |
86 | while (id->name[0]) { | |
87 | if (!strcmp(sdev->modalias, id->name)) | |
88 | return id; | |
89 | id++; | |
90 | } | |
91 | return NULL; | |
92 | } | |
93 | ||
94 | const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev) | |
95 | { | |
96 | const struct spi_driver *sdrv = to_spi_driver(sdev->dev.driver); | |
97 | ||
98 | return spi_match_id(sdrv->id_table, sdev); | |
99 | } | |
100 | EXPORT_SYMBOL_GPL(spi_get_device_id); | |
101 | ||
8ae12a0d DB |
102 | static int spi_match_device(struct device *dev, struct device_driver *drv) |
103 | { | |
104 | const struct spi_device *spi = to_spi_device(dev); | |
75368bf6 AV |
105 | const struct spi_driver *sdrv = to_spi_driver(drv); |
106 | ||
2b7a32f7 SA |
107 | /* Attempt an OF style match */ |
108 | if (of_driver_match_device(dev, drv)) | |
109 | return 1; | |
110 | ||
64bee4d2 MW |
111 | /* Then try ACPI */ |
112 | if (acpi_driver_match_device(dev, drv)) | |
113 | return 1; | |
114 | ||
75368bf6 AV |
115 | if (sdrv->id_table) |
116 | return !!spi_match_id(sdrv->id_table, spi); | |
8ae12a0d | 117 | |
35f74fca | 118 | return strcmp(spi->modalias, drv->name) == 0; |
8ae12a0d DB |
119 | } |
120 | ||
7eff2e7a | 121 | static int spi_uevent(struct device *dev, struct kobj_uevent_env *env) |
8ae12a0d DB |
122 | { |
123 | const struct spi_device *spi = to_spi_device(dev); | |
8c4ff6d0 ZR |
124 | int rc; |
125 | ||
126 | rc = acpi_device_uevent_modalias(dev, env); | |
127 | if (rc != -ENODEV) | |
128 | return rc; | |
8ae12a0d | 129 | |
e0626e38 | 130 | add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias); |
8ae12a0d DB |
131 | return 0; |
132 | } | |
133 | ||
3ae22e8c MB |
134 | #ifdef CONFIG_PM_SLEEP |
135 | static int spi_legacy_suspend(struct device *dev, pm_message_t message) | |
8ae12a0d | 136 | { |
3c72426f | 137 | int value = 0; |
b885244e | 138 | struct spi_driver *drv = to_spi_driver(dev->driver); |
8ae12a0d | 139 | |
8ae12a0d | 140 | /* suspend will stop irqs and dma; no more i/o */ |
3c72426f DB |
141 | if (drv) { |
142 | if (drv->suspend) | |
143 | value = drv->suspend(to_spi_device(dev), message); | |
144 | else | |
145 | dev_dbg(dev, "... can't suspend\n"); | |
146 | } | |
8ae12a0d DB |
147 | return value; |
148 | } | |
149 | ||
3ae22e8c | 150 | static int spi_legacy_resume(struct device *dev) |
8ae12a0d | 151 | { |
3c72426f | 152 | int value = 0; |
b885244e | 153 | struct spi_driver *drv = to_spi_driver(dev->driver); |
8ae12a0d | 154 | |
8ae12a0d | 155 | /* resume may restart the i/o queue */ |
3c72426f DB |
156 | if (drv) { |
157 | if (drv->resume) | |
158 | value = drv->resume(to_spi_device(dev)); | |
159 | else | |
160 | dev_dbg(dev, "... can't resume\n"); | |
161 | } | |
8ae12a0d DB |
162 | return value; |
163 | } | |
164 | ||
3ae22e8c MB |
165 | static int spi_pm_suspend(struct device *dev) |
166 | { | |
167 | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | |
168 | ||
169 | if (pm) | |
170 | return pm_generic_suspend(dev); | |
171 | else | |
172 | return spi_legacy_suspend(dev, PMSG_SUSPEND); | |
173 | } | |
174 | ||
175 | static int spi_pm_resume(struct device *dev) | |
176 | { | |
177 | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | |
178 | ||
179 | if (pm) | |
180 | return pm_generic_resume(dev); | |
181 | else | |
182 | return spi_legacy_resume(dev); | |
183 | } | |
184 | ||
185 | static int spi_pm_freeze(struct device *dev) | |
186 | { | |
187 | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | |
188 | ||
189 | if (pm) | |
190 | return pm_generic_freeze(dev); | |
191 | else | |
192 | return spi_legacy_suspend(dev, PMSG_FREEZE); | |
193 | } | |
194 | ||
195 | static int spi_pm_thaw(struct device *dev) | |
196 | { | |
197 | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | |
198 | ||
199 | if (pm) | |
200 | return pm_generic_thaw(dev); | |
201 | else | |
202 | return spi_legacy_resume(dev); | |
203 | } | |
204 | ||
205 | static int spi_pm_poweroff(struct device *dev) | |
206 | { | |
207 | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | |
208 | ||
209 | if (pm) | |
210 | return pm_generic_poweroff(dev); | |
211 | else | |
212 | return spi_legacy_suspend(dev, PMSG_HIBERNATE); | |
213 | } | |
214 | ||
215 | static int spi_pm_restore(struct device *dev) | |
216 | { | |
217 | const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; | |
218 | ||
219 | if (pm) | |
220 | return pm_generic_restore(dev); | |
221 | else | |
222 | return spi_legacy_resume(dev); | |
223 | } | |
8ae12a0d | 224 | #else |
3ae22e8c MB |
225 | #define spi_pm_suspend NULL |
226 | #define spi_pm_resume NULL | |
227 | #define spi_pm_freeze NULL | |
228 | #define spi_pm_thaw NULL | |
229 | #define spi_pm_poweroff NULL | |
230 | #define spi_pm_restore NULL | |
8ae12a0d DB |
231 | #endif |
232 | ||
3ae22e8c MB |
233 | static const struct dev_pm_ops spi_pm = { |
234 | .suspend = spi_pm_suspend, | |
235 | .resume = spi_pm_resume, | |
236 | .freeze = spi_pm_freeze, | |
237 | .thaw = spi_pm_thaw, | |
238 | .poweroff = spi_pm_poweroff, | |
239 | .restore = spi_pm_restore, | |
240 | SET_RUNTIME_PM_OPS( | |
241 | pm_generic_runtime_suspend, | |
242 | pm_generic_runtime_resume, | |
45f0a85c | 243 | NULL |
3ae22e8c MB |
244 | ) |
245 | }; | |
246 | ||
8ae12a0d DB |
247 | struct bus_type spi_bus_type = { |
248 | .name = "spi", | |
aa7da564 | 249 | .dev_groups = spi_dev_groups, |
8ae12a0d DB |
250 | .match = spi_match_device, |
251 | .uevent = spi_uevent, | |
3ae22e8c | 252 | .pm = &spi_pm, |
8ae12a0d DB |
253 | }; |
254 | EXPORT_SYMBOL_GPL(spi_bus_type); | |
255 | ||
b885244e DB |
256 | |
257 | static int spi_drv_probe(struct device *dev) | |
258 | { | |
259 | const struct spi_driver *sdrv = to_spi_driver(dev->driver); | |
33cf00e5 MW |
260 | int ret; |
261 | ||
aec35f4e JD |
262 | acpi_dev_pm_attach(dev, true); |
263 | ret = sdrv->probe(to_spi_device(dev)); | |
33cf00e5 | 264 | if (ret) |
aec35f4e | 265 | acpi_dev_pm_detach(dev, true); |
b885244e | 266 | |
33cf00e5 | 267 | return ret; |
b885244e DB |
268 | } |
269 | ||
270 | static int spi_drv_remove(struct device *dev) | |
271 | { | |
272 | const struct spi_driver *sdrv = to_spi_driver(dev->driver); | |
33cf00e5 MW |
273 | int ret; |
274 | ||
aec35f4e JD |
275 | ret = sdrv->remove(to_spi_device(dev)); |
276 | acpi_dev_pm_detach(dev, true); | |
b885244e | 277 | |
33cf00e5 | 278 | return ret; |
b885244e DB |
279 | } |
280 | ||
281 | static void spi_drv_shutdown(struct device *dev) | |
282 | { | |
283 | const struct spi_driver *sdrv = to_spi_driver(dev->driver); | |
284 | ||
285 | sdrv->shutdown(to_spi_device(dev)); | |
286 | } | |
287 | ||
33e34dc6 DB |
288 | /** |
289 | * spi_register_driver - register a SPI driver | |
290 | * @sdrv: the driver to register | |
291 | * Context: can sleep | |
292 | */ | |
b885244e DB |
293 | int spi_register_driver(struct spi_driver *sdrv) |
294 | { | |
295 | sdrv->driver.bus = &spi_bus_type; | |
296 | if (sdrv->probe) | |
297 | sdrv->driver.probe = spi_drv_probe; | |
298 | if (sdrv->remove) | |
299 | sdrv->driver.remove = spi_drv_remove; | |
300 | if (sdrv->shutdown) | |
301 | sdrv->driver.shutdown = spi_drv_shutdown; | |
302 | return driver_register(&sdrv->driver); | |
303 | } | |
304 | EXPORT_SYMBOL_GPL(spi_register_driver); | |
305 | ||
8ae12a0d DB |
306 | /*-------------------------------------------------------------------------*/ |
307 | ||
308 | /* SPI devices should normally not be created by SPI device drivers; that | |
309 | * would make them board-specific. Similarly with SPI master drivers. | |
310 | * Device registration normally goes into like arch/.../mach.../board-YYY.c | |
311 | * with other readonly (flashable) information about mainboard devices. | |
312 | */ | |
313 | ||
314 | struct boardinfo { | |
315 | struct list_head list; | |
2b9603a0 | 316 | struct spi_board_info board_info; |
8ae12a0d DB |
317 | }; |
318 | ||
319 | static LIST_HEAD(board_list); | |
2b9603a0 FT |
320 | static LIST_HEAD(spi_master_list); |
321 | ||
322 | /* | |
323 | * Used to protect add/del opertion for board_info list and | |
324 | * spi_master list, and their matching process | |
325 | */ | |
94040828 | 326 | static DEFINE_MUTEX(board_lock); |
8ae12a0d | 327 | |
dc87c98e GL |
328 | /** |
329 | * spi_alloc_device - Allocate a new SPI device | |
330 | * @master: Controller to which device is connected | |
331 | * Context: can sleep | |
332 | * | |
333 | * Allows a driver to allocate and initialize a spi_device without | |
334 | * registering it immediately. This allows a driver to directly | |
335 | * fill the spi_device with device parameters before calling | |
336 | * spi_add_device() on it. | |
337 | * | |
338 | * Caller is responsible to call spi_add_device() on the returned | |
339 | * spi_device structure to add it to the SPI master. If the caller | |
340 | * needs to discard the spi_device without adding it, then it should | |
341 | * call spi_dev_put() on it. | |
342 | * | |
343 | * Returns a pointer to the new device, or NULL. | |
344 | */ | |
345 | struct spi_device *spi_alloc_device(struct spi_master *master) | |
346 | { | |
347 | struct spi_device *spi; | |
348 | struct device *dev = master->dev.parent; | |
349 | ||
350 | if (!spi_master_get(master)) | |
351 | return NULL; | |
352 | ||
5fe5f05e | 353 | spi = kzalloc(sizeof(*spi), GFP_KERNEL); |
dc87c98e GL |
354 | if (!spi) { |
355 | dev_err(dev, "cannot alloc spi_device\n"); | |
356 | spi_master_put(master); | |
357 | return NULL; | |
358 | } | |
359 | ||
360 | spi->master = master; | |
178db7d3 | 361 | spi->dev.parent = &master->dev; |
dc87c98e GL |
362 | spi->dev.bus = &spi_bus_type; |
363 | spi->dev.release = spidev_release; | |
446411e1 | 364 | spi->cs_gpio = -ENOENT; |
dc87c98e GL |
365 | device_initialize(&spi->dev); |
366 | return spi; | |
367 | } | |
368 | EXPORT_SYMBOL_GPL(spi_alloc_device); | |
369 | ||
e13ac47b JN |
370 | static void spi_dev_set_name(struct spi_device *spi) |
371 | { | |
372 | struct acpi_device *adev = ACPI_COMPANION(&spi->dev); | |
373 | ||
374 | if (adev) { | |
375 | dev_set_name(&spi->dev, "spi-%s", acpi_dev_name(adev)); | |
376 | return; | |
377 | } | |
378 | ||
379 | dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->master->dev), | |
380 | spi->chip_select); | |
381 | } | |
382 | ||
b6fb8d3a MW |
383 | static int spi_dev_check(struct device *dev, void *data) |
384 | { | |
385 | struct spi_device *spi = to_spi_device(dev); | |
386 | struct spi_device *new_spi = data; | |
387 | ||
388 | if (spi->master == new_spi->master && | |
389 | spi->chip_select == new_spi->chip_select) | |
390 | return -EBUSY; | |
391 | return 0; | |
392 | } | |
393 | ||
dc87c98e GL |
394 | /** |
395 | * spi_add_device - Add spi_device allocated with spi_alloc_device | |
396 | * @spi: spi_device to register | |
397 | * | |
398 | * Companion function to spi_alloc_device. Devices allocated with | |
399 | * spi_alloc_device can be added onto the spi bus with this function. | |
400 | * | |
e48880e0 | 401 | * Returns 0 on success; negative errno on failure |
dc87c98e GL |
402 | */ |
403 | int spi_add_device(struct spi_device *spi) | |
404 | { | |
e48880e0 | 405 | static DEFINE_MUTEX(spi_add_lock); |
74317984 JCPV |
406 | struct spi_master *master = spi->master; |
407 | struct device *dev = master->dev.parent; | |
dc87c98e GL |
408 | int status; |
409 | ||
410 | /* Chipselects are numbered 0..max; validate. */ | |
74317984 | 411 | if (spi->chip_select >= master->num_chipselect) { |
dc87c98e GL |
412 | dev_err(dev, "cs%d >= max %d\n", |
413 | spi->chip_select, | |
74317984 | 414 | master->num_chipselect); |
dc87c98e GL |
415 | return -EINVAL; |
416 | } | |
417 | ||
418 | /* Set the bus ID string */ | |
e13ac47b | 419 | spi_dev_set_name(spi); |
e48880e0 DB |
420 | |
421 | /* We need to make sure there's no other device with this | |
422 | * chipselect **BEFORE** we call setup(), else we'll trash | |
423 | * its configuration. Lock against concurrent add() calls. | |
424 | */ | |
425 | mutex_lock(&spi_add_lock); | |
426 | ||
b6fb8d3a MW |
427 | status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check); |
428 | if (status) { | |
e48880e0 DB |
429 | dev_err(dev, "chipselect %d already in use\n", |
430 | spi->chip_select); | |
e48880e0 DB |
431 | goto done; |
432 | } | |
433 | ||
74317984 JCPV |
434 | if (master->cs_gpios) |
435 | spi->cs_gpio = master->cs_gpios[spi->chip_select]; | |
436 | ||
e48880e0 DB |
437 | /* Drivers may modify this initial i/o setup, but will |
438 | * normally rely on the device being setup. Devices | |
439 | * using SPI_CS_HIGH can't coexist well otherwise... | |
440 | */ | |
7d077197 | 441 | status = spi_setup(spi); |
dc87c98e | 442 | if (status < 0) { |
eb288a1f LW |
443 | dev_err(dev, "can't setup %s, status %d\n", |
444 | dev_name(&spi->dev), status); | |
e48880e0 | 445 | goto done; |
dc87c98e GL |
446 | } |
447 | ||
e48880e0 | 448 | /* Device may be bound to an active driver when this returns */ |
dc87c98e | 449 | status = device_add(&spi->dev); |
e48880e0 | 450 | if (status < 0) |
eb288a1f LW |
451 | dev_err(dev, "can't add %s, status %d\n", |
452 | dev_name(&spi->dev), status); | |
e48880e0 | 453 | else |
35f74fca | 454 | dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev)); |
dc87c98e | 455 | |
e48880e0 DB |
456 | done: |
457 | mutex_unlock(&spi_add_lock); | |
458 | return status; | |
dc87c98e GL |
459 | } |
460 | EXPORT_SYMBOL_GPL(spi_add_device); | |
8ae12a0d | 461 | |
33e34dc6 DB |
462 | /** |
463 | * spi_new_device - instantiate one new SPI device | |
464 | * @master: Controller to which device is connected | |
465 | * @chip: Describes the SPI device | |
466 | * Context: can sleep | |
467 | * | |
468 | * On typical mainboards, this is purely internal; and it's not needed | |
8ae12a0d DB |
469 | * after board init creates the hard-wired devices. Some development |
470 | * platforms may not be able to use spi_register_board_info though, and | |
471 | * this is exported so that for example a USB or parport based adapter | |
472 | * driver could add devices (which it would learn about out-of-band). | |
082c8cb4 DB |
473 | * |
474 | * Returns the new device, or NULL. | |
8ae12a0d | 475 | */ |
e9d5a461 AB |
476 | struct spi_device *spi_new_device(struct spi_master *master, |
477 | struct spi_board_info *chip) | |
8ae12a0d DB |
478 | { |
479 | struct spi_device *proxy; | |
8ae12a0d DB |
480 | int status; |
481 | ||
082c8cb4 DB |
482 | /* NOTE: caller did any chip->bus_num checks necessary. |
483 | * | |
484 | * Also, unless we change the return value convention to use | |
485 | * error-or-pointer (not NULL-or-pointer), troubleshootability | |
486 | * suggests syslogged diagnostics are best here (ugh). | |
487 | */ | |
488 | ||
dc87c98e GL |
489 | proxy = spi_alloc_device(master); |
490 | if (!proxy) | |
8ae12a0d DB |
491 | return NULL; |
492 | ||
102eb975 GL |
493 | WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias)); |
494 | ||
8ae12a0d DB |
495 | proxy->chip_select = chip->chip_select; |
496 | proxy->max_speed_hz = chip->max_speed_hz; | |
980a01c9 | 497 | proxy->mode = chip->mode; |
8ae12a0d | 498 | proxy->irq = chip->irq; |
102eb975 | 499 | strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias)); |
8ae12a0d DB |
500 | proxy->dev.platform_data = (void *) chip->platform_data; |
501 | proxy->controller_data = chip->controller_data; | |
502 | proxy->controller_state = NULL; | |
8ae12a0d | 503 | |
dc87c98e | 504 | status = spi_add_device(proxy); |
8ae12a0d | 505 | if (status < 0) { |
dc87c98e GL |
506 | spi_dev_put(proxy); |
507 | return NULL; | |
8ae12a0d DB |
508 | } |
509 | ||
8ae12a0d DB |
510 | return proxy; |
511 | } | |
512 | EXPORT_SYMBOL_GPL(spi_new_device); | |
513 | ||
2b9603a0 FT |
514 | static void spi_match_master_to_boardinfo(struct spi_master *master, |
515 | struct spi_board_info *bi) | |
516 | { | |
517 | struct spi_device *dev; | |
518 | ||
519 | if (master->bus_num != bi->bus_num) | |
520 | return; | |
521 | ||
522 | dev = spi_new_device(master, bi); | |
523 | if (!dev) | |
524 | dev_err(master->dev.parent, "can't create new device for %s\n", | |
525 | bi->modalias); | |
526 | } | |
527 | ||
33e34dc6 DB |
528 | /** |
529 | * spi_register_board_info - register SPI devices for a given board | |
530 | * @info: array of chip descriptors | |
531 | * @n: how many descriptors are provided | |
532 | * Context: can sleep | |
533 | * | |
8ae12a0d DB |
534 | * Board-specific early init code calls this (probably during arch_initcall) |
535 | * with segments of the SPI device table. Any device nodes are created later, | |
536 | * after the relevant parent SPI controller (bus_num) is defined. We keep | |
537 | * this table of devices forever, so that reloading a controller driver will | |
538 | * not make Linux forget about these hard-wired devices. | |
539 | * | |
540 | * Other code can also call this, e.g. a particular add-on board might provide | |
541 | * SPI devices through its expansion connector, so code initializing that board | |
542 | * would naturally declare its SPI devices. | |
543 | * | |
544 | * The board info passed can safely be __initdata ... but be careful of | |
545 | * any embedded pointers (platform_data, etc), they're copied as-is. | |
546 | */ | |
fd4a319b | 547 | int spi_register_board_info(struct spi_board_info const *info, unsigned n) |
8ae12a0d | 548 | { |
2b9603a0 FT |
549 | struct boardinfo *bi; |
550 | int i; | |
8ae12a0d | 551 | |
2b9603a0 | 552 | bi = kzalloc(n * sizeof(*bi), GFP_KERNEL); |
8ae12a0d DB |
553 | if (!bi) |
554 | return -ENOMEM; | |
8ae12a0d | 555 | |
2b9603a0 FT |
556 | for (i = 0; i < n; i++, bi++, info++) { |
557 | struct spi_master *master; | |
8ae12a0d | 558 | |
2b9603a0 FT |
559 | memcpy(&bi->board_info, info, sizeof(*info)); |
560 | mutex_lock(&board_lock); | |
561 | list_add_tail(&bi->list, &board_list); | |
562 | list_for_each_entry(master, &spi_master_list, list) | |
563 | spi_match_master_to_boardinfo(master, &bi->board_info); | |
564 | mutex_unlock(&board_lock); | |
8ae12a0d | 565 | } |
2b9603a0 FT |
566 | |
567 | return 0; | |
8ae12a0d DB |
568 | } |
569 | ||
570 | /*-------------------------------------------------------------------------*/ | |
571 | ||
b158935f MB |
572 | static void spi_set_cs(struct spi_device *spi, bool enable) |
573 | { | |
574 | if (spi->mode & SPI_CS_HIGH) | |
575 | enable = !enable; | |
576 | ||
577 | if (spi->cs_gpio >= 0) | |
578 | gpio_set_value(spi->cs_gpio, !enable); | |
579 | else if (spi->master->set_cs) | |
580 | spi->master->set_cs(spi, !enable); | |
581 | } | |
582 | ||
6ad45a27 MB |
583 | static int spi_map_buf(struct spi_master *master, struct device *dev, |
584 | struct sg_table *sgt, void *buf, size_t len, | |
585 | enum dma_data_direction dir) | |
586 | { | |
587 | const bool vmalloced_buf = is_vmalloc_addr(buf); | |
588 | const int desc_len = vmalloced_buf ? PAGE_SIZE : master->max_dma_len; | |
589 | const int sgs = DIV_ROUND_UP(len, desc_len); | |
590 | struct page *vm_page; | |
591 | void *sg_buf; | |
592 | size_t min; | |
593 | int i, ret; | |
594 | ||
595 | ret = sg_alloc_table(sgt, sgs, GFP_KERNEL); | |
596 | if (ret != 0) | |
597 | return ret; | |
598 | ||
599 | for (i = 0; i < sgs; i++) { | |
600 | min = min_t(size_t, len, desc_len); | |
601 | ||
602 | if (vmalloced_buf) { | |
603 | vm_page = vmalloc_to_page(buf); | |
604 | if (!vm_page) { | |
605 | sg_free_table(sgt); | |
606 | return -ENOMEM; | |
607 | } | |
608 | sg_buf = page_address(vm_page) + | |
609 | ((size_t)buf & ~PAGE_MASK); | |
610 | } else { | |
611 | sg_buf = buf; | |
612 | } | |
613 | ||
614 | sg_set_buf(&sgt->sgl[i], sg_buf, min); | |
615 | ||
616 | buf += min; | |
617 | len -= min; | |
618 | } | |
619 | ||
620 | ret = dma_map_sg(dev, sgt->sgl, sgt->nents, dir); | |
621 | if (ret < 0) { | |
622 | sg_free_table(sgt); | |
623 | return ret; | |
624 | } | |
625 | ||
626 | sgt->nents = ret; | |
627 | ||
628 | return 0; | |
629 | } | |
630 | ||
631 | static void spi_unmap_buf(struct spi_master *master, struct device *dev, | |
632 | struct sg_table *sgt, enum dma_data_direction dir) | |
633 | { | |
634 | if (sgt->orig_nents) { | |
635 | dma_unmap_sg(dev, sgt->sgl, sgt->orig_nents, dir); | |
636 | sg_free_table(sgt); | |
637 | } | |
638 | } | |
639 | ||
99adef31 MB |
640 | static int spi_map_msg(struct spi_master *master, struct spi_message *msg) |
641 | { | |
99adef31 MB |
642 | struct device *tx_dev, *rx_dev; |
643 | struct spi_transfer *xfer; | |
3a2eba9b | 644 | void *tmp; |
51327353 | 645 | unsigned int max_tx, max_rx; |
6ad45a27 | 646 | int ret; |
3a2eba9b MB |
647 | |
648 | if (master->flags & (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX)) { | |
649 | max_tx = 0; | |
650 | max_rx = 0; | |
651 | ||
652 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { | |
653 | if ((master->flags & SPI_MASTER_MUST_TX) && | |
654 | !xfer->tx_buf) | |
655 | max_tx = max(xfer->len, max_tx); | |
656 | if ((master->flags & SPI_MASTER_MUST_RX) && | |
657 | !xfer->rx_buf) | |
658 | max_rx = max(xfer->len, max_rx); | |
659 | } | |
660 | ||
661 | if (max_tx) { | |
662 | tmp = krealloc(master->dummy_tx, max_tx, | |
663 | GFP_KERNEL | GFP_DMA); | |
664 | if (!tmp) | |
665 | return -ENOMEM; | |
666 | master->dummy_tx = tmp; | |
667 | memset(tmp, 0, max_tx); | |
668 | } | |
669 | ||
670 | if (max_rx) { | |
671 | tmp = krealloc(master->dummy_rx, max_rx, | |
672 | GFP_KERNEL | GFP_DMA); | |
673 | if (!tmp) | |
674 | return -ENOMEM; | |
675 | master->dummy_rx = tmp; | |
676 | } | |
677 | ||
678 | if (max_tx || max_rx) { | |
679 | list_for_each_entry(xfer, &msg->transfers, | |
680 | transfer_list) { | |
681 | if (!xfer->tx_buf) | |
682 | xfer->tx_buf = master->dummy_tx; | |
683 | if (!xfer->rx_buf) | |
684 | xfer->rx_buf = master->dummy_rx; | |
685 | } | |
686 | } | |
687 | } | |
99adef31 | 688 | |
6ad45a27 | 689 | if (!master->can_dma) |
99adef31 MB |
690 | return 0; |
691 | ||
692 | tx_dev = &master->dma_tx->dev->device; | |
693 | rx_dev = &master->dma_rx->dev->device; | |
694 | ||
695 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { | |
696 | if (!master->can_dma(master, msg->spi, xfer)) | |
697 | continue; | |
698 | ||
699 | if (xfer->tx_buf != NULL) { | |
6ad45a27 MB |
700 | ret = spi_map_buf(master, tx_dev, &xfer->tx_sg, |
701 | (void *)xfer->tx_buf, xfer->len, | |
702 | DMA_TO_DEVICE); | |
703 | if (ret != 0) | |
704 | return ret; | |
99adef31 MB |
705 | } |
706 | ||
707 | if (xfer->rx_buf != NULL) { | |
6ad45a27 MB |
708 | ret = spi_map_buf(master, rx_dev, &xfer->rx_sg, |
709 | xfer->rx_buf, xfer->len, | |
710 | DMA_FROM_DEVICE); | |
711 | if (ret != 0) { | |
712 | spi_unmap_buf(master, tx_dev, &xfer->tx_sg, | |
713 | DMA_TO_DEVICE); | |
714 | return ret; | |
99adef31 MB |
715 | } |
716 | } | |
717 | } | |
718 | ||
719 | master->cur_msg_mapped = true; | |
720 | ||
721 | return 0; | |
722 | } | |
723 | ||
724 | static int spi_unmap_msg(struct spi_master *master, struct spi_message *msg) | |
725 | { | |
726 | struct spi_transfer *xfer; | |
727 | struct device *tx_dev, *rx_dev; | |
728 | ||
6ad45a27 | 729 | if (!master->cur_msg_mapped || !master->can_dma) |
99adef31 MB |
730 | return 0; |
731 | ||
732 | tx_dev = &master->dma_tx->dev->device; | |
733 | rx_dev = &master->dma_rx->dev->device; | |
734 | ||
735 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { | |
736 | if (!master->can_dma(master, msg->spi, xfer)) | |
737 | continue; | |
738 | ||
6ad45a27 MB |
739 | spi_unmap_buf(master, rx_dev, &xfer->rx_sg, DMA_FROM_DEVICE); |
740 | spi_unmap_buf(master, tx_dev, &xfer->tx_sg, DMA_TO_DEVICE); | |
99adef31 MB |
741 | } |
742 | ||
743 | return 0; | |
744 | } | |
745 | ||
b158935f MB |
746 | /* |
747 | * spi_transfer_one_message - Default implementation of transfer_one_message() | |
748 | * | |
749 | * This is a standard implementation of transfer_one_message() for | |
750 | * drivers which impelment a transfer_one() operation. It provides | |
751 | * standard handling of delays and chip select management. | |
752 | */ | |
753 | static int spi_transfer_one_message(struct spi_master *master, | |
754 | struct spi_message *msg) | |
755 | { | |
756 | struct spi_transfer *xfer; | |
b158935f MB |
757 | bool keep_cs = false; |
758 | int ret = 0; | |
16a0ce4e | 759 | int ms = 1; |
b158935f MB |
760 | |
761 | spi_set_cs(msg->spi, true); | |
762 | ||
763 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { | |
764 | trace_spi_transfer_start(msg, xfer); | |
765 | ||
16735d02 | 766 | reinit_completion(&master->xfer_completion); |
b158935f MB |
767 | |
768 | ret = master->transfer_one(master, msg->spi, xfer); | |
769 | if (ret < 0) { | |
770 | dev_err(&msg->spi->dev, | |
771 | "SPI transfer failed: %d\n", ret); | |
772 | goto out; | |
773 | } | |
774 | ||
13a42798 AL |
775 | if (ret > 0) { |
776 | ret = 0; | |
16a0ce4e MB |
777 | ms = xfer->len * 8 * 1000 / xfer->speed_hz; |
778 | ms += 10; /* some tolerance */ | |
779 | ||
780 | ms = wait_for_completion_timeout(&master->xfer_completion, | |
781 | msecs_to_jiffies(ms)); | |
782 | } | |
783 | ||
784 | if (ms == 0) { | |
785 | dev_err(&msg->spi->dev, "SPI transfer timed out\n"); | |
786 | msg->status = -ETIMEDOUT; | |
13a42798 | 787 | } |
b158935f MB |
788 | |
789 | trace_spi_transfer_stop(msg, xfer); | |
790 | ||
791 | if (msg->status != -EINPROGRESS) | |
792 | goto out; | |
793 | ||
794 | if (xfer->delay_usecs) | |
795 | udelay(xfer->delay_usecs); | |
796 | ||
797 | if (xfer->cs_change) { | |
798 | if (list_is_last(&xfer->transfer_list, | |
799 | &msg->transfers)) { | |
800 | keep_cs = true; | |
801 | } else { | |
0b73aa63 MB |
802 | spi_set_cs(msg->spi, false); |
803 | udelay(10); | |
804 | spi_set_cs(msg->spi, true); | |
b158935f MB |
805 | } |
806 | } | |
807 | ||
808 | msg->actual_length += xfer->len; | |
809 | } | |
810 | ||
811 | out: | |
812 | if (ret != 0 || !keep_cs) | |
813 | spi_set_cs(msg->spi, false); | |
814 | ||
815 | if (msg->status == -EINPROGRESS) | |
816 | msg->status = ret; | |
817 | ||
818 | spi_finalize_current_message(master); | |
819 | ||
820 | return ret; | |
821 | } | |
822 | ||
823 | /** | |
824 | * spi_finalize_current_transfer - report completion of a transfer | |
825 | * | |
826 | * Called by SPI drivers using the core transfer_one_message() | |
827 | * implementation to notify it that the current interrupt driven | |
9e8f4882 | 828 | * transfer has finished and the next one may be scheduled. |
b158935f MB |
829 | */ |
830 | void spi_finalize_current_transfer(struct spi_master *master) | |
831 | { | |
832 | complete(&master->xfer_completion); | |
833 | } | |
834 | EXPORT_SYMBOL_GPL(spi_finalize_current_transfer); | |
835 | ||
ffbbdd21 LW |
836 | /** |
837 | * spi_pump_messages - kthread work function which processes spi message queue | |
838 | * @work: pointer to kthread work struct contained in the master struct | |
839 | * | |
840 | * This function checks if there is any spi message in the queue that | |
841 | * needs processing and if so call out to the driver to initialize hardware | |
842 | * and transfer each message. | |
843 | * | |
844 | */ | |
845 | static void spi_pump_messages(struct kthread_work *work) | |
846 | { | |
847 | struct spi_master *master = | |
848 | container_of(work, struct spi_master, pump_messages); | |
849 | unsigned long flags; | |
850 | bool was_busy = false; | |
851 | int ret; | |
852 | ||
853 | /* Lock queue and check for queue work */ | |
854 | spin_lock_irqsave(&master->queue_lock, flags); | |
855 | if (list_empty(&master->queue) || !master->running) { | |
b0b36b86 BF |
856 | if (!master->busy) { |
857 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
858 | return; | |
ffbbdd21 LW |
859 | } |
860 | master->busy = false; | |
861 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
3a2eba9b MB |
862 | kfree(master->dummy_rx); |
863 | master->dummy_rx = NULL; | |
864 | kfree(master->dummy_tx); | |
865 | master->dummy_tx = NULL; | |
b0b36b86 BF |
866 | if (master->unprepare_transfer_hardware && |
867 | master->unprepare_transfer_hardware(master)) | |
868 | dev_err(&master->dev, | |
869 | "failed to unprepare transfer hardware\n"); | |
49834de2 MB |
870 | if (master->auto_runtime_pm) { |
871 | pm_runtime_mark_last_busy(master->dev.parent); | |
872 | pm_runtime_put_autosuspend(master->dev.parent); | |
873 | } | |
56ec1978 | 874 | trace_spi_master_idle(master); |
ffbbdd21 LW |
875 | return; |
876 | } | |
877 | ||
878 | /* Make sure we are not already running a message */ | |
879 | if (master->cur_msg) { | |
880 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
881 | return; | |
882 | } | |
883 | /* Extract head of queue */ | |
884 | master->cur_msg = | |
a89e2d27 | 885 | list_first_entry(&master->queue, struct spi_message, queue); |
ffbbdd21 LW |
886 | |
887 | list_del_init(&master->cur_msg->queue); | |
888 | if (master->busy) | |
889 | was_busy = true; | |
890 | else | |
891 | master->busy = true; | |
892 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
893 | ||
49834de2 MB |
894 | if (!was_busy && master->auto_runtime_pm) { |
895 | ret = pm_runtime_get_sync(master->dev.parent); | |
896 | if (ret < 0) { | |
897 | dev_err(&master->dev, "Failed to power device: %d\n", | |
898 | ret); | |
899 | return; | |
900 | } | |
901 | } | |
902 | ||
56ec1978 MB |
903 | if (!was_busy) |
904 | trace_spi_master_busy(master); | |
905 | ||
7dfd2bd7 | 906 | if (!was_busy && master->prepare_transfer_hardware) { |
ffbbdd21 LW |
907 | ret = master->prepare_transfer_hardware(master); |
908 | if (ret) { | |
909 | dev_err(&master->dev, | |
910 | "failed to prepare transfer hardware\n"); | |
49834de2 MB |
911 | |
912 | if (master->auto_runtime_pm) | |
913 | pm_runtime_put(master->dev.parent); | |
ffbbdd21 LW |
914 | return; |
915 | } | |
916 | } | |
917 | ||
56ec1978 MB |
918 | trace_spi_message_start(master->cur_msg); |
919 | ||
2841a5fc MB |
920 | if (master->prepare_message) { |
921 | ret = master->prepare_message(master, master->cur_msg); | |
922 | if (ret) { | |
923 | dev_err(&master->dev, | |
924 | "failed to prepare message: %d\n", ret); | |
925 | master->cur_msg->status = ret; | |
926 | spi_finalize_current_message(master); | |
927 | return; | |
928 | } | |
929 | master->cur_msg_prepared = true; | |
930 | } | |
931 | ||
99adef31 MB |
932 | ret = spi_map_msg(master, master->cur_msg); |
933 | if (ret) { | |
934 | master->cur_msg->status = ret; | |
935 | spi_finalize_current_message(master); | |
936 | return; | |
937 | } | |
938 | ||
ffbbdd21 LW |
939 | ret = master->transfer_one_message(master, master->cur_msg); |
940 | if (ret) { | |
941 | dev_err(&master->dev, | |
1f802f82 | 942 | "failed to transfer one message from queue\n"); |
ffbbdd21 LW |
943 | return; |
944 | } | |
945 | } | |
946 | ||
947 | static int spi_init_queue(struct spi_master *master) | |
948 | { | |
949 | struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 }; | |
950 | ||
951 | INIT_LIST_HEAD(&master->queue); | |
952 | spin_lock_init(&master->queue_lock); | |
953 | ||
954 | master->running = false; | |
955 | master->busy = false; | |
956 | ||
957 | init_kthread_worker(&master->kworker); | |
958 | master->kworker_task = kthread_run(kthread_worker_fn, | |
f170168b | 959 | &master->kworker, "%s", |
ffbbdd21 LW |
960 | dev_name(&master->dev)); |
961 | if (IS_ERR(master->kworker_task)) { | |
962 | dev_err(&master->dev, "failed to create message pump task\n"); | |
963 | return -ENOMEM; | |
964 | } | |
965 | init_kthread_work(&master->pump_messages, spi_pump_messages); | |
966 | ||
967 | /* | |
968 | * Master config will indicate if this controller should run the | |
969 | * message pump with high (realtime) priority to reduce the transfer | |
970 | * latency on the bus by minimising the delay between a transfer | |
971 | * request and the scheduling of the message pump thread. Without this | |
972 | * setting the message pump thread will remain at default priority. | |
973 | */ | |
974 | if (master->rt) { | |
975 | dev_info(&master->dev, | |
976 | "will run message pump with realtime priority\n"); | |
977 | sched_setscheduler(master->kworker_task, SCHED_FIFO, ¶m); | |
978 | } | |
979 | ||
980 | return 0; | |
981 | } | |
982 | ||
983 | /** | |
984 | * spi_get_next_queued_message() - called by driver to check for queued | |
985 | * messages | |
986 | * @master: the master to check for queued messages | |
987 | * | |
988 | * If there are more messages in the queue, the next message is returned from | |
989 | * this call. | |
990 | */ | |
991 | struct spi_message *spi_get_next_queued_message(struct spi_master *master) | |
992 | { | |
993 | struct spi_message *next; | |
994 | unsigned long flags; | |
995 | ||
996 | /* get a pointer to the next message, if any */ | |
997 | spin_lock_irqsave(&master->queue_lock, flags); | |
1cfd97f9 AL |
998 | next = list_first_entry_or_null(&master->queue, struct spi_message, |
999 | queue); | |
ffbbdd21 LW |
1000 | spin_unlock_irqrestore(&master->queue_lock, flags); |
1001 | ||
1002 | return next; | |
1003 | } | |
1004 | EXPORT_SYMBOL_GPL(spi_get_next_queued_message); | |
1005 | ||
1006 | /** | |
1007 | * spi_finalize_current_message() - the current message is complete | |
1008 | * @master: the master to return the message to | |
1009 | * | |
1010 | * Called by the driver to notify the core that the message in the front of the | |
1011 | * queue is complete and can be removed from the queue. | |
1012 | */ | |
1013 | void spi_finalize_current_message(struct spi_master *master) | |
1014 | { | |
1015 | struct spi_message *mesg; | |
1016 | unsigned long flags; | |
2841a5fc | 1017 | int ret; |
ffbbdd21 LW |
1018 | |
1019 | spin_lock_irqsave(&master->queue_lock, flags); | |
1020 | mesg = master->cur_msg; | |
1021 | master->cur_msg = NULL; | |
1022 | ||
1023 | queue_kthread_work(&master->kworker, &master->pump_messages); | |
1024 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1025 | ||
99adef31 MB |
1026 | spi_unmap_msg(master, mesg); |
1027 | ||
2841a5fc MB |
1028 | if (master->cur_msg_prepared && master->unprepare_message) { |
1029 | ret = master->unprepare_message(master, mesg); | |
1030 | if (ret) { | |
1031 | dev_err(&master->dev, | |
1032 | "failed to unprepare message: %d\n", ret); | |
1033 | } | |
1034 | } | |
1035 | master->cur_msg_prepared = false; | |
1036 | ||
ffbbdd21 LW |
1037 | mesg->state = NULL; |
1038 | if (mesg->complete) | |
1039 | mesg->complete(mesg->context); | |
56ec1978 MB |
1040 | |
1041 | trace_spi_message_done(mesg); | |
ffbbdd21 LW |
1042 | } |
1043 | EXPORT_SYMBOL_GPL(spi_finalize_current_message); | |
1044 | ||
1045 | static int spi_start_queue(struct spi_master *master) | |
1046 | { | |
1047 | unsigned long flags; | |
1048 | ||
1049 | spin_lock_irqsave(&master->queue_lock, flags); | |
1050 | ||
1051 | if (master->running || master->busy) { | |
1052 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1053 | return -EBUSY; | |
1054 | } | |
1055 | ||
1056 | master->running = true; | |
1057 | master->cur_msg = NULL; | |
1058 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1059 | ||
1060 | queue_kthread_work(&master->kworker, &master->pump_messages); | |
1061 | ||
1062 | return 0; | |
1063 | } | |
1064 | ||
1065 | static int spi_stop_queue(struct spi_master *master) | |
1066 | { | |
1067 | unsigned long flags; | |
1068 | unsigned limit = 500; | |
1069 | int ret = 0; | |
1070 | ||
1071 | spin_lock_irqsave(&master->queue_lock, flags); | |
1072 | ||
1073 | /* | |
1074 | * This is a bit lame, but is optimized for the common execution path. | |
1075 | * A wait_queue on the master->busy could be used, but then the common | |
1076 | * execution path (pump_messages) would be required to call wake_up or | |
1077 | * friends on every SPI message. Do this instead. | |
1078 | */ | |
1079 | while ((!list_empty(&master->queue) || master->busy) && limit--) { | |
1080 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
f97b26b0 | 1081 | usleep_range(10000, 11000); |
ffbbdd21 LW |
1082 | spin_lock_irqsave(&master->queue_lock, flags); |
1083 | } | |
1084 | ||
1085 | if (!list_empty(&master->queue) || master->busy) | |
1086 | ret = -EBUSY; | |
1087 | else | |
1088 | master->running = false; | |
1089 | ||
1090 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1091 | ||
1092 | if (ret) { | |
1093 | dev_warn(&master->dev, | |
1094 | "could not stop message queue\n"); | |
1095 | return ret; | |
1096 | } | |
1097 | return ret; | |
1098 | } | |
1099 | ||
1100 | static int spi_destroy_queue(struct spi_master *master) | |
1101 | { | |
1102 | int ret; | |
1103 | ||
1104 | ret = spi_stop_queue(master); | |
1105 | ||
1106 | /* | |
1107 | * flush_kthread_worker will block until all work is done. | |
1108 | * If the reason that stop_queue timed out is that the work will never | |
1109 | * finish, then it does no good to call flush/stop thread, so | |
1110 | * return anyway. | |
1111 | */ | |
1112 | if (ret) { | |
1113 | dev_err(&master->dev, "problem destroying queue\n"); | |
1114 | return ret; | |
1115 | } | |
1116 | ||
1117 | flush_kthread_worker(&master->kworker); | |
1118 | kthread_stop(master->kworker_task); | |
1119 | ||
1120 | return 0; | |
1121 | } | |
1122 | ||
1123 | /** | |
1124 | * spi_queued_transfer - transfer function for queued transfers | |
1125 | * @spi: spi device which is requesting transfer | |
1126 | * @msg: spi message which is to handled is queued to driver queue | |
1127 | */ | |
1128 | static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg) | |
1129 | { | |
1130 | struct spi_master *master = spi->master; | |
1131 | unsigned long flags; | |
1132 | ||
1133 | spin_lock_irqsave(&master->queue_lock, flags); | |
1134 | ||
1135 | if (!master->running) { | |
1136 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1137 | return -ESHUTDOWN; | |
1138 | } | |
1139 | msg->actual_length = 0; | |
1140 | msg->status = -EINPROGRESS; | |
1141 | ||
1142 | list_add_tail(&msg->queue, &master->queue); | |
96b3eace | 1143 | if (!master->busy) |
ffbbdd21 LW |
1144 | queue_kthread_work(&master->kworker, &master->pump_messages); |
1145 | ||
1146 | spin_unlock_irqrestore(&master->queue_lock, flags); | |
1147 | return 0; | |
1148 | } | |
1149 | ||
1150 | static int spi_master_initialize_queue(struct spi_master *master) | |
1151 | { | |
1152 | int ret; | |
1153 | ||
1154 | master->queued = true; | |
1155 | master->transfer = spi_queued_transfer; | |
b158935f MB |
1156 | if (!master->transfer_one_message) |
1157 | master->transfer_one_message = spi_transfer_one_message; | |
ffbbdd21 LW |
1158 | |
1159 | /* Initialize and start queue */ | |
1160 | ret = spi_init_queue(master); | |
1161 | if (ret) { | |
1162 | dev_err(&master->dev, "problem initializing queue\n"); | |
1163 | goto err_init_queue; | |
1164 | } | |
1165 | ret = spi_start_queue(master); | |
1166 | if (ret) { | |
1167 | dev_err(&master->dev, "problem starting queue\n"); | |
1168 | goto err_start_queue; | |
1169 | } | |
1170 | ||
1171 | return 0; | |
1172 | ||
1173 | err_start_queue: | |
1174 | err_init_queue: | |
1175 | spi_destroy_queue(master); | |
1176 | return ret; | |
1177 | } | |
1178 | ||
1179 | /*-------------------------------------------------------------------------*/ | |
1180 | ||
7cb94361 | 1181 | #if defined(CONFIG_OF) |
d57a4282 GL |
1182 | /** |
1183 | * of_register_spi_devices() - Register child devices onto the SPI bus | |
1184 | * @master: Pointer to spi_master device | |
1185 | * | |
1186 | * Registers an spi_device for each child node of master node which has a 'reg' | |
1187 | * property. | |
1188 | */ | |
1189 | static void of_register_spi_devices(struct spi_master *master) | |
1190 | { | |
1191 | struct spi_device *spi; | |
1192 | struct device_node *nc; | |
d57a4282 | 1193 | int rc; |
89da4293 | 1194 | u32 value; |
d57a4282 GL |
1195 | |
1196 | if (!master->dev.of_node) | |
1197 | return; | |
1198 | ||
f3b6159e | 1199 | for_each_available_child_of_node(master->dev.of_node, nc) { |
d57a4282 GL |
1200 | /* Alloc an spi_device */ |
1201 | spi = spi_alloc_device(master); | |
1202 | if (!spi) { | |
1203 | dev_err(&master->dev, "spi_device alloc error for %s\n", | |
1204 | nc->full_name); | |
1205 | spi_dev_put(spi); | |
1206 | continue; | |
1207 | } | |
1208 | ||
1209 | /* Select device driver */ | |
1210 | if (of_modalias_node(nc, spi->modalias, | |
1211 | sizeof(spi->modalias)) < 0) { | |
1212 | dev_err(&master->dev, "cannot find modalias for %s\n", | |
1213 | nc->full_name); | |
1214 | spi_dev_put(spi); | |
1215 | continue; | |
1216 | } | |
1217 | ||
1218 | /* Device address */ | |
89da4293 TP |
1219 | rc = of_property_read_u32(nc, "reg", &value); |
1220 | if (rc) { | |
1221 | dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n", | |
1222 | nc->full_name, rc); | |
d57a4282 GL |
1223 | spi_dev_put(spi); |
1224 | continue; | |
1225 | } | |
89da4293 | 1226 | spi->chip_select = value; |
d57a4282 GL |
1227 | |
1228 | /* Mode (clock phase/polarity/etc.) */ | |
1229 | if (of_find_property(nc, "spi-cpha", NULL)) | |
1230 | spi->mode |= SPI_CPHA; | |
1231 | if (of_find_property(nc, "spi-cpol", NULL)) | |
1232 | spi->mode |= SPI_CPOL; | |
1233 | if (of_find_property(nc, "spi-cs-high", NULL)) | |
1234 | spi->mode |= SPI_CS_HIGH; | |
c20151df LPC |
1235 | if (of_find_property(nc, "spi-3wire", NULL)) |
1236 | spi->mode |= SPI_3WIRE; | |
d57a4282 | 1237 | |
f477b7fb | 1238 | /* Device DUAL/QUAD mode */ |
89da4293 TP |
1239 | if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) { |
1240 | switch (value) { | |
1241 | case 1: | |
a822e99c | 1242 | break; |
89da4293 | 1243 | case 2: |
a822e99c MB |
1244 | spi->mode |= SPI_TX_DUAL; |
1245 | break; | |
89da4293 | 1246 | case 4: |
a822e99c MB |
1247 | spi->mode |= SPI_TX_QUAD; |
1248 | break; | |
1249 | default: | |
1250 | dev_err(&master->dev, | |
a110f93d | 1251 | "spi-tx-bus-width %d not supported\n", |
89da4293 | 1252 | value); |
a822e99c MB |
1253 | spi_dev_put(spi); |
1254 | continue; | |
1255 | } | |
f477b7fb | 1256 | } |
1257 | ||
89da4293 TP |
1258 | if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) { |
1259 | switch (value) { | |
1260 | case 1: | |
a822e99c | 1261 | break; |
89da4293 | 1262 | case 2: |
a822e99c MB |
1263 | spi->mode |= SPI_RX_DUAL; |
1264 | break; | |
89da4293 | 1265 | case 4: |
a822e99c MB |
1266 | spi->mode |= SPI_RX_QUAD; |
1267 | break; | |
1268 | default: | |
1269 | dev_err(&master->dev, | |
a110f93d | 1270 | "spi-rx-bus-width %d not supported\n", |
89da4293 | 1271 | value); |
a822e99c MB |
1272 | spi_dev_put(spi); |
1273 | continue; | |
1274 | } | |
f477b7fb | 1275 | } |
1276 | ||
d57a4282 | 1277 | /* Device speed */ |
89da4293 TP |
1278 | rc = of_property_read_u32(nc, "spi-max-frequency", &value); |
1279 | if (rc) { | |
1280 | dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n", | |
1281 | nc->full_name, rc); | |
d57a4282 GL |
1282 | spi_dev_put(spi); |
1283 | continue; | |
1284 | } | |
89da4293 | 1285 | spi->max_speed_hz = value; |
d57a4282 GL |
1286 | |
1287 | /* IRQ */ | |
1288 | spi->irq = irq_of_parse_and_map(nc, 0); | |
1289 | ||
1290 | /* Store a pointer to the node in the device structure */ | |
1291 | of_node_get(nc); | |
1292 | spi->dev.of_node = nc; | |
1293 | ||
1294 | /* Register the new device */ | |
70fac17c | 1295 | request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias); |
d57a4282 GL |
1296 | rc = spi_add_device(spi); |
1297 | if (rc) { | |
1298 | dev_err(&master->dev, "spi_device register error %s\n", | |
1299 | nc->full_name); | |
1300 | spi_dev_put(spi); | |
1301 | } | |
1302 | ||
1303 | } | |
1304 | } | |
1305 | #else | |
1306 | static void of_register_spi_devices(struct spi_master *master) { } | |
1307 | #endif | |
1308 | ||
64bee4d2 MW |
1309 | #ifdef CONFIG_ACPI |
1310 | static int acpi_spi_add_resource(struct acpi_resource *ares, void *data) | |
1311 | { | |
1312 | struct spi_device *spi = data; | |
1313 | ||
1314 | if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) { | |
1315 | struct acpi_resource_spi_serialbus *sb; | |
1316 | ||
1317 | sb = &ares->data.spi_serial_bus; | |
1318 | if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) { | |
1319 | spi->chip_select = sb->device_selection; | |
1320 | spi->max_speed_hz = sb->connection_speed; | |
1321 | ||
1322 | if (sb->clock_phase == ACPI_SPI_SECOND_PHASE) | |
1323 | spi->mode |= SPI_CPHA; | |
1324 | if (sb->clock_polarity == ACPI_SPI_START_HIGH) | |
1325 | spi->mode |= SPI_CPOL; | |
1326 | if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH) | |
1327 | spi->mode |= SPI_CS_HIGH; | |
1328 | } | |
1329 | } else if (spi->irq < 0) { | |
1330 | struct resource r; | |
1331 | ||
1332 | if (acpi_dev_resource_interrupt(ares, 0, &r)) | |
1333 | spi->irq = r.start; | |
1334 | } | |
1335 | ||
1336 | /* Always tell the ACPI core to skip this resource */ | |
1337 | return 1; | |
1338 | } | |
1339 | ||
1340 | static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level, | |
1341 | void *data, void **return_value) | |
1342 | { | |
1343 | struct spi_master *master = data; | |
1344 | struct list_head resource_list; | |
1345 | struct acpi_device *adev; | |
1346 | struct spi_device *spi; | |
1347 | int ret; | |
1348 | ||
1349 | if (acpi_bus_get_device(handle, &adev)) | |
1350 | return AE_OK; | |
1351 | if (acpi_bus_get_status(adev) || !adev->status.present) | |
1352 | return AE_OK; | |
1353 | ||
1354 | spi = spi_alloc_device(master); | |
1355 | if (!spi) { | |
1356 | dev_err(&master->dev, "failed to allocate SPI device for %s\n", | |
1357 | dev_name(&adev->dev)); | |
1358 | return AE_NO_MEMORY; | |
1359 | } | |
1360 | ||
7b199811 | 1361 | ACPI_COMPANION_SET(&spi->dev, adev); |
64bee4d2 MW |
1362 | spi->irq = -1; |
1363 | ||
1364 | INIT_LIST_HEAD(&resource_list); | |
1365 | ret = acpi_dev_get_resources(adev, &resource_list, | |
1366 | acpi_spi_add_resource, spi); | |
1367 | acpi_dev_free_resource_list(&resource_list); | |
1368 | ||
1369 | if (ret < 0 || !spi->max_speed_hz) { | |
1370 | spi_dev_put(spi); | |
1371 | return AE_OK; | |
1372 | } | |
1373 | ||
33cf00e5 | 1374 | adev->power.flags.ignore_parent = true; |
cf9eb39c | 1375 | strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias)); |
64bee4d2 | 1376 | if (spi_add_device(spi)) { |
33cf00e5 | 1377 | adev->power.flags.ignore_parent = false; |
64bee4d2 MW |
1378 | dev_err(&master->dev, "failed to add SPI device %s from ACPI\n", |
1379 | dev_name(&adev->dev)); | |
1380 | spi_dev_put(spi); | |
1381 | } | |
1382 | ||
1383 | return AE_OK; | |
1384 | } | |
1385 | ||
1386 | static void acpi_register_spi_devices(struct spi_master *master) | |
1387 | { | |
1388 | acpi_status status; | |
1389 | acpi_handle handle; | |
1390 | ||
29896178 | 1391 | handle = ACPI_HANDLE(master->dev.parent); |
64bee4d2 MW |
1392 | if (!handle) |
1393 | return; | |
1394 | ||
1395 | status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1, | |
1396 | acpi_spi_add_device, NULL, | |
1397 | master, NULL); | |
1398 | if (ACPI_FAILURE(status)) | |
1399 | dev_warn(&master->dev, "failed to enumerate SPI slaves\n"); | |
1400 | } | |
1401 | #else | |
1402 | static inline void acpi_register_spi_devices(struct spi_master *master) {} | |
1403 | #endif /* CONFIG_ACPI */ | |
1404 | ||
49dce689 | 1405 | static void spi_master_release(struct device *dev) |
8ae12a0d DB |
1406 | { |
1407 | struct spi_master *master; | |
1408 | ||
49dce689 | 1409 | master = container_of(dev, struct spi_master, dev); |
8ae12a0d DB |
1410 | kfree(master); |
1411 | } | |
1412 | ||
1413 | static struct class spi_master_class = { | |
1414 | .name = "spi_master", | |
1415 | .owner = THIS_MODULE, | |
49dce689 | 1416 | .dev_release = spi_master_release, |
8ae12a0d DB |
1417 | }; |
1418 | ||
1419 | ||
ffbbdd21 | 1420 | |
8ae12a0d DB |
1421 | /** |
1422 | * spi_alloc_master - allocate SPI master controller | |
1423 | * @dev: the controller, possibly using the platform_bus | |
33e34dc6 | 1424 | * @size: how much zeroed driver-private data to allocate; the pointer to this |
49dce689 | 1425 | * memory is in the driver_data field of the returned device, |
0c868461 | 1426 | * accessible with spi_master_get_devdata(). |
33e34dc6 | 1427 | * Context: can sleep |
8ae12a0d DB |
1428 | * |
1429 | * This call is used only by SPI master controller drivers, which are the | |
1430 | * only ones directly touching chip registers. It's how they allocate | |
ba1a0513 | 1431 | * an spi_master structure, prior to calling spi_register_master(). |
8ae12a0d DB |
1432 | * |
1433 | * This must be called from context that can sleep. It returns the SPI | |
1434 | * master structure on success, else NULL. | |
1435 | * | |
1436 | * The caller is responsible for assigning the bus number and initializing | |
ba1a0513 | 1437 | * the master's methods before calling spi_register_master(); and (after errors |
eb4af0f5 UKK |
1438 | * adding the device) calling spi_master_put() and kfree() to prevent a memory |
1439 | * leak. | |
8ae12a0d | 1440 | */ |
e9d5a461 | 1441 | struct spi_master *spi_alloc_master(struct device *dev, unsigned size) |
8ae12a0d DB |
1442 | { |
1443 | struct spi_master *master; | |
1444 | ||
0c868461 DB |
1445 | if (!dev) |
1446 | return NULL; | |
1447 | ||
5fe5f05e | 1448 | master = kzalloc(size + sizeof(*master), GFP_KERNEL); |
8ae12a0d DB |
1449 | if (!master) |
1450 | return NULL; | |
1451 | ||
49dce689 | 1452 | device_initialize(&master->dev); |
1e8a52e1 GL |
1453 | master->bus_num = -1; |
1454 | master->num_chipselect = 1; | |
49dce689 TJ |
1455 | master->dev.class = &spi_master_class; |
1456 | master->dev.parent = get_device(dev); | |
0c868461 | 1457 | spi_master_set_devdata(master, &master[1]); |
8ae12a0d DB |
1458 | |
1459 | return master; | |
1460 | } | |
1461 | EXPORT_SYMBOL_GPL(spi_alloc_master); | |
1462 | ||
74317984 JCPV |
1463 | #ifdef CONFIG_OF |
1464 | static int of_spi_register_master(struct spi_master *master) | |
1465 | { | |
e80beb27 | 1466 | int nb, i, *cs; |
74317984 JCPV |
1467 | struct device_node *np = master->dev.of_node; |
1468 | ||
1469 | if (!np) | |
1470 | return 0; | |
1471 | ||
1472 | nb = of_gpio_named_count(np, "cs-gpios"); | |
5fe5f05e | 1473 | master->num_chipselect = max_t(int, nb, master->num_chipselect); |
74317984 | 1474 | |
8ec5d84e AL |
1475 | /* Return error only for an incorrectly formed cs-gpios property */ |
1476 | if (nb == 0 || nb == -ENOENT) | |
74317984 | 1477 | return 0; |
8ec5d84e AL |
1478 | else if (nb < 0) |
1479 | return nb; | |
74317984 JCPV |
1480 | |
1481 | cs = devm_kzalloc(&master->dev, | |
1482 | sizeof(int) * master->num_chipselect, | |
1483 | GFP_KERNEL); | |
1484 | master->cs_gpios = cs; | |
1485 | ||
1486 | if (!master->cs_gpios) | |
1487 | return -ENOMEM; | |
1488 | ||
0da83bb1 | 1489 | for (i = 0; i < master->num_chipselect; i++) |
446411e1 | 1490 | cs[i] = -ENOENT; |
74317984 JCPV |
1491 | |
1492 | for (i = 0; i < nb; i++) | |
1493 | cs[i] = of_get_named_gpio(np, "cs-gpios", i); | |
1494 | ||
1495 | return 0; | |
1496 | } | |
1497 | #else | |
1498 | static int of_spi_register_master(struct spi_master *master) | |
1499 | { | |
1500 | return 0; | |
1501 | } | |
1502 | #endif | |
1503 | ||
8ae12a0d DB |
1504 | /** |
1505 | * spi_register_master - register SPI master controller | |
1506 | * @master: initialized master, originally from spi_alloc_master() | |
33e34dc6 | 1507 | * Context: can sleep |
8ae12a0d DB |
1508 | * |
1509 | * SPI master controllers connect to their drivers using some non-SPI bus, | |
1510 | * such as the platform bus. The final stage of probe() in that code | |
1511 | * includes calling spi_register_master() to hook up to this SPI bus glue. | |
1512 | * | |
1513 | * SPI controllers use board specific (often SOC specific) bus numbers, | |
1514 | * and board-specific addressing for SPI devices combines those numbers | |
1515 | * with chip select numbers. Since SPI does not directly support dynamic | |
1516 | * device identification, boards need configuration tables telling which | |
1517 | * chip is at which address. | |
1518 | * | |
1519 | * This must be called from context that can sleep. It returns zero on | |
1520 | * success, else a negative error code (dropping the master's refcount). | |
0c868461 DB |
1521 | * After a successful return, the caller is responsible for calling |
1522 | * spi_unregister_master(). | |
8ae12a0d | 1523 | */ |
e9d5a461 | 1524 | int spi_register_master(struct spi_master *master) |
8ae12a0d | 1525 | { |
e44a45ae | 1526 | static atomic_t dyn_bus_id = ATOMIC_INIT((1<<15) - 1); |
49dce689 | 1527 | struct device *dev = master->dev.parent; |
2b9603a0 | 1528 | struct boardinfo *bi; |
8ae12a0d DB |
1529 | int status = -ENODEV; |
1530 | int dynamic = 0; | |
1531 | ||
0c868461 DB |
1532 | if (!dev) |
1533 | return -ENODEV; | |
1534 | ||
74317984 JCPV |
1535 | status = of_spi_register_master(master); |
1536 | if (status) | |
1537 | return status; | |
1538 | ||
082c8cb4 DB |
1539 | /* even if it's just one always-selected device, there must |
1540 | * be at least one chipselect | |
1541 | */ | |
1542 | if (master->num_chipselect == 0) | |
1543 | return -EINVAL; | |
1544 | ||
bb29785e GL |
1545 | if ((master->bus_num < 0) && master->dev.of_node) |
1546 | master->bus_num = of_alias_get_id(master->dev.of_node, "spi"); | |
1547 | ||
8ae12a0d | 1548 | /* convention: dynamically assigned bus IDs count down from the max */ |
a020ed75 | 1549 | if (master->bus_num < 0) { |
082c8cb4 DB |
1550 | /* FIXME switch to an IDR based scheme, something like |
1551 | * I2C now uses, so we can't run out of "dynamic" IDs | |
1552 | */ | |
8ae12a0d | 1553 | master->bus_num = atomic_dec_return(&dyn_bus_id); |
b885244e | 1554 | dynamic = 1; |
8ae12a0d DB |
1555 | } |
1556 | ||
cf32b71e ES |
1557 | spin_lock_init(&master->bus_lock_spinlock); |
1558 | mutex_init(&master->bus_lock_mutex); | |
1559 | master->bus_lock_flag = 0; | |
b158935f | 1560 | init_completion(&master->xfer_completion); |
6ad45a27 MB |
1561 | if (!master->max_dma_len) |
1562 | master->max_dma_len = INT_MAX; | |
cf32b71e | 1563 | |
8ae12a0d DB |
1564 | /* register the device, then userspace will see it. |
1565 | * registration fails if the bus ID is in use. | |
1566 | */ | |
35f74fca | 1567 | dev_set_name(&master->dev, "spi%u", master->bus_num); |
49dce689 | 1568 | status = device_add(&master->dev); |
b885244e | 1569 | if (status < 0) |
8ae12a0d | 1570 | goto done; |
35f74fca | 1571 | dev_dbg(dev, "registered master %s%s\n", dev_name(&master->dev), |
8ae12a0d DB |
1572 | dynamic ? " (dynamic)" : ""); |
1573 | ||
ffbbdd21 LW |
1574 | /* If we're using a queued driver, start the queue */ |
1575 | if (master->transfer) | |
1576 | dev_info(dev, "master is unqueued, this is deprecated\n"); | |
1577 | else { | |
1578 | status = spi_master_initialize_queue(master); | |
1579 | if (status) { | |
e93b0724 | 1580 | device_del(&master->dev); |
ffbbdd21 LW |
1581 | goto done; |
1582 | } | |
1583 | } | |
1584 | ||
2b9603a0 FT |
1585 | mutex_lock(&board_lock); |
1586 | list_add_tail(&master->list, &spi_master_list); | |
1587 | list_for_each_entry(bi, &board_list, list) | |
1588 | spi_match_master_to_boardinfo(master, &bi->board_info); | |
1589 | mutex_unlock(&board_lock); | |
1590 | ||
64bee4d2 | 1591 | /* Register devices from the device tree and ACPI */ |
12b15e83 | 1592 | of_register_spi_devices(master); |
64bee4d2 | 1593 | acpi_register_spi_devices(master); |
8ae12a0d DB |
1594 | done: |
1595 | return status; | |
1596 | } | |
1597 | EXPORT_SYMBOL_GPL(spi_register_master); | |
1598 | ||
666d5b4c MB |
1599 | static void devm_spi_unregister(struct device *dev, void *res) |
1600 | { | |
1601 | spi_unregister_master(*(struct spi_master **)res); | |
1602 | } | |
1603 | ||
1604 | /** | |
1605 | * dev_spi_register_master - register managed SPI master controller | |
1606 | * @dev: device managing SPI master | |
1607 | * @master: initialized master, originally from spi_alloc_master() | |
1608 | * Context: can sleep | |
1609 | * | |
1610 | * Register a SPI device as with spi_register_master() which will | |
1611 | * automatically be unregister | |
1612 | */ | |
1613 | int devm_spi_register_master(struct device *dev, struct spi_master *master) | |
1614 | { | |
1615 | struct spi_master **ptr; | |
1616 | int ret; | |
1617 | ||
1618 | ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL); | |
1619 | if (!ptr) | |
1620 | return -ENOMEM; | |
1621 | ||
1622 | ret = spi_register_master(master); | |
4b92894e | 1623 | if (!ret) { |
666d5b4c MB |
1624 | *ptr = master; |
1625 | devres_add(dev, ptr); | |
1626 | } else { | |
1627 | devres_free(ptr); | |
1628 | } | |
1629 | ||
1630 | return ret; | |
1631 | } | |
1632 | EXPORT_SYMBOL_GPL(devm_spi_register_master); | |
1633 | ||
34860089 | 1634 | static int __unregister(struct device *dev, void *null) |
8ae12a0d | 1635 | { |
34860089 | 1636 | spi_unregister_device(to_spi_device(dev)); |
8ae12a0d DB |
1637 | return 0; |
1638 | } | |
1639 | ||
1640 | /** | |
1641 | * spi_unregister_master - unregister SPI master controller | |
1642 | * @master: the master being unregistered | |
33e34dc6 | 1643 | * Context: can sleep |
8ae12a0d DB |
1644 | * |
1645 | * This call is used only by SPI master controller drivers, which are the | |
1646 | * only ones directly touching chip registers. | |
1647 | * | |
1648 | * This must be called from context that can sleep. | |
1649 | */ | |
1650 | void spi_unregister_master(struct spi_master *master) | |
1651 | { | |
89fc9a1a JG |
1652 | int dummy; |
1653 | ||
ffbbdd21 LW |
1654 | if (master->queued) { |
1655 | if (spi_destroy_queue(master)) | |
1656 | dev_err(&master->dev, "queue remove failed\n"); | |
1657 | } | |
1658 | ||
2b9603a0 FT |
1659 | mutex_lock(&board_lock); |
1660 | list_del(&master->list); | |
1661 | mutex_unlock(&board_lock); | |
1662 | ||
97dbf37d | 1663 | dummy = device_for_each_child(&master->dev, NULL, __unregister); |
49dce689 | 1664 | device_unregister(&master->dev); |
8ae12a0d DB |
1665 | } |
1666 | EXPORT_SYMBOL_GPL(spi_unregister_master); | |
1667 | ||
ffbbdd21 LW |
1668 | int spi_master_suspend(struct spi_master *master) |
1669 | { | |
1670 | int ret; | |
1671 | ||
1672 | /* Basically no-ops for non-queued masters */ | |
1673 | if (!master->queued) | |
1674 | return 0; | |
1675 | ||
1676 | ret = spi_stop_queue(master); | |
1677 | if (ret) | |
1678 | dev_err(&master->dev, "queue stop failed\n"); | |
1679 | ||
1680 | return ret; | |
1681 | } | |
1682 | EXPORT_SYMBOL_GPL(spi_master_suspend); | |
1683 | ||
1684 | int spi_master_resume(struct spi_master *master) | |
1685 | { | |
1686 | int ret; | |
1687 | ||
1688 | if (!master->queued) | |
1689 | return 0; | |
1690 | ||
1691 | ret = spi_start_queue(master); | |
1692 | if (ret) | |
1693 | dev_err(&master->dev, "queue restart failed\n"); | |
1694 | ||
1695 | return ret; | |
1696 | } | |
1697 | EXPORT_SYMBOL_GPL(spi_master_resume); | |
1698 | ||
9f3b795a | 1699 | static int __spi_master_match(struct device *dev, const void *data) |
5ed2c832 DY |
1700 | { |
1701 | struct spi_master *m; | |
9f3b795a | 1702 | const u16 *bus_num = data; |
5ed2c832 DY |
1703 | |
1704 | m = container_of(dev, struct spi_master, dev); | |
1705 | return m->bus_num == *bus_num; | |
1706 | } | |
1707 | ||
8ae12a0d DB |
1708 | /** |
1709 | * spi_busnum_to_master - look up master associated with bus_num | |
1710 | * @bus_num: the master's bus number | |
33e34dc6 | 1711 | * Context: can sleep |
8ae12a0d DB |
1712 | * |
1713 | * This call may be used with devices that are registered after | |
1714 | * arch init time. It returns a refcounted pointer to the relevant | |
1715 | * spi_master (which the caller must release), or NULL if there is | |
1716 | * no such master registered. | |
1717 | */ | |
1718 | struct spi_master *spi_busnum_to_master(u16 bus_num) | |
1719 | { | |
49dce689 | 1720 | struct device *dev; |
1e9a51dc | 1721 | struct spi_master *master = NULL; |
5ed2c832 | 1722 | |
695794ae | 1723 | dev = class_find_device(&spi_master_class, NULL, &bus_num, |
5ed2c832 DY |
1724 | __spi_master_match); |
1725 | if (dev) | |
1726 | master = container_of(dev, struct spi_master, dev); | |
1727 | /* reference got in class_find_device */ | |
1e9a51dc | 1728 | return master; |
8ae12a0d DB |
1729 | } |
1730 | EXPORT_SYMBOL_GPL(spi_busnum_to_master); | |
1731 | ||
1732 | ||
1733 | /*-------------------------------------------------------------------------*/ | |
1734 | ||
7d077197 DB |
1735 | /* Core methods for SPI master protocol drivers. Some of the |
1736 | * other core methods are currently defined as inline functions. | |
1737 | */ | |
1738 | ||
1739 | /** | |
1740 | * spi_setup - setup SPI mode and clock rate | |
1741 | * @spi: the device whose settings are being modified | |
1742 | * Context: can sleep, and no requests are queued to the device | |
1743 | * | |
1744 | * SPI protocol drivers may need to update the transfer mode if the | |
1745 | * device doesn't work with its default. They may likewise need | |
1746 | * to update clock rates or word sizes from initial values. This function | |
1747 | * changes those settings, and must be called from a context that can sleep. | |
1748 | * Except for SPI_CS_HIGH, which takes effect immediately, the changes take | |
1749 | * effect the next time the device is selected and data is transferred to | |
1750 | * or from it. When this function returns, the spi device is deselected. | |
1751 | * | |
1752 | * Note that this call will fail if the protocol driver specifies an option | |
1753 | * that the underlying controller or its driver does not support. For | |
1754 | * example, not all hardware supports wire transfers using nine bit words, | |
1755 | * LSB-first wire encoding, or active-high chipselects. | |
1756 | */ | |
1757 | int spi_setup(struct spi_device *spi) | |
1758 | { | |
e7db06b5 | 1759 | unsigned bad_bits; |
caae070c | 1760 | int status = 0; |
7d077197 | 1761 | |
f477b7fb | 1762 | /* check mode to prevent that DUAL and QUAD set at the same time |
1763 | */ | |
1764 | if (((spi->mode & SPI_TX_DUAL) && (spi->mode & SPI_TX_QUAD)) || | |
1765 | ((spi->mode & SPI_RX_DUAL) && (spi->mode & SPI_RX_QUAD))) { | |
1766 | dev_err(&spi->dev, | |
1767 | "setup: can not select dual and quad at the same time\n"); | |
1768 | return -EINVAL; | |
1769 | } | |
1770 | /* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden | |
1771 | */ | |
1772 | if ((spi->mode & SPI_3WIRE) && (spi->mode & | |
1773 | (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD))) | |
1774 | return -EINVAL; | |
e7db06b5 DB |
1775 | /* help drivers fail *cleanly* when they need options |
1776 | * that aren't supported with their current master | |
1777 | */ | |
1778 | bad_bits = spi->mode & ~spi->master->mode_bits; | |
1779 | if (bad_bits) { | |
eb288a1f | 1780 | dev_err(&spi->dev, "setup: unsupported mode bits %x\n", |
e7db06b5 DB |
1781 | bad_bits); |
1782 | return -EINVAL; | |
1783 | } | |
1784 | ||
7d077197 DB |
1785 | if (!spi->bits_per_word) |
1786 | spi->bits_per_word = 8; | |
1787 | ||
052eb2d4 AL |
1788 | if (!spi->max_speed_hz) |
1789 | spi->max_speed_hz = spi->master->max_speed_hz; | |
1790 | ||
caae070c LD |
1791 | if (spi->master->setup) |
1792 | status = spi->master->setup(spi); | |
7d077197 | 1793 | |
5fe5f05e | 1794 | dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n", |
7d077197 DB |
1795 | (int) (spi->mode & (SPI_CPOL | SPI_CPHA)), |
1796 | (spi->mode & SPI_CS_HIGH) ? "cs_high, " : "", | |
1797 | (spi->mode & SPI_LSB_FIRST) ? "lsb, " : "", | |
1798 | (spi->mode & SPI_3WIRE) ? "3wire, " : "", | |
1799 | (spi->mode & SPI_LOOP) ? "loopback, " : "", | |
1800 | spi->bits_per_word, spi->max_speed_hz, | |
1801 | status); | |
1802 | ||
1803 | return status; | |
1804 | } | |
1805 | EXPORT_SYMBOL_GPL(spi_setup); | |
1806 | ||
90808738 | 1807 | static int __spi_validate(struct spi_device *spi, struct spi_message *message) |
cf32b71e ES |
1808 | { |
1809 | struct spi_master *master = spi->master; | |
e6811d1d | 1810 | struct spi_transfer *xfer; |
6ea31293 | 1811 | int w_size; |
cf32b71e | 1812 | |
24a0013a MB |
1813 | if (list_empty(&message->transfers)) |
1814 | return -EINVAL; | |
24a0013a | 1815 | |
cf32b71e ES |
1816 | /* Half-duplex links include original MicroWire, and ones with |
1817 | * only one data pin like SPI_3WIRE (switches direction) or where | |
1818 | * either MOSI or MISO is missing. They can also be caused by | |
1819 | * software limitations. | |
1820 | */ | |
1821 | if ((master->flags & SPI_MASTER_HALF_DUPLEX) | |
1822 | || (spi->mode & SPI_3WIRE)) { | |
cf32b71e ES |
1823 | unsigned flags = master->flags; |
1824 | ||
1825 | list_for_each_entry(xfer, &message->transfers, transfer_list) { | |
1826 | if (xfer->rx_buf && xfer->tx_buf) | |
1827 | return -EINVAL; | |
1828 | if ((flags & SPI_MASTER_NO_TX) && xfer->tx_buf) | |
1829 | return -EINVAL; | |
1830 | if ((flags & SPI_MASTER_NO_RX) && xfer->rx_buf) | |
1831 | return -EINVAL; | |
1832 | } | |
1833 | } | |
1834 | ||
e6811d1d | 1835 | /** |
059b8ffe LD |
1836 | * Set transfer bits_per_word and max speed as spi device default if |
1837 | * it is not set for this transfer. | |
f477b7fb | 1838 | * Set transfer tx_nbits and rx_nbits as single transfer default |
1839 | * (SPI_NBITS_SINGLE) if it is not set for this transfer. | |
e6811d1d LD |
1840 | */ |
1841 | list_for_each_entry(xfer, &message->transfers, transfer_list) { | |
078726ce | 1842 | message->frame_length += xfer->len; |
e6811d1d LD |
1843 | if (!xfer->bits_per_word) |
1844 | xfer->bits_per_word = spi->bits_per_word; | |
a6f87fad AL |
1845 | |
1846 | if (!xfer->speed_hz) | |
059b8ffe | 1847 | xfer->speed_hz = spi->max_speed_hz; |
a6f87fad AL |
1848 | |
1849 | if (master->max_speed_hz && | |
1850 | xfer->speed_hz > master->max_speed_hz) | |
1851 | xfer->speed_hz = master->max_speed_hz; | |
56ede94a | 1852 | |
543bb255 SW |
1853 | if (master->bits_per_word_mask) { |
1854 | /* Only 32 bits fit in the mask */ | |
1855 | if (xfer->bits_per_word > 32) | |
1856 | return -EINVAL; | |
1857 | if (!(master->bits_per_word_mask & | |
1858 | BIT(xfer->bits_per_word - 1))) | |
1859 | return -EINVAL; | |
1860 | } | |
a2fd4f9f | 1861 | |
4d94bd21 II |
1862 | /* |
1863 | * SPI transfer length should be multiple of SPI word size | |
1864 | * where SPI word size should be power-of-two multiple | |
1865 | */ | |
1866 | if (xfer->bits_per_word <= 8) | |
1867 | w_size = 1; | |
1868 | else if (xfer->bits_per_word <= 16) | |
1869 | w_size = 2; | |
1870 | else | |
1871 | w_size = 4; | |
1872 | ||
4d94bd21 | 1873 | /* No partial transfers accepted */ |
6ea31293 | 1874 | if (xfer->len % w_size) |
4d94bd21 II |
1875 | return -EINVAL; |
1876 | ||
a2fd4f9f MB |
1877 | if (xfer->speed_hz && master->min_speed_hz && |
1878 | xfer->speed_hz < master->min_speed_hz) | |
1879 | return -EINVAL; | |
f477b7fb | 1880 | |
1881 | if (xfer->tx_buf && !xfer->tx_nbits) | |
1882 | xfer->tx_nbits = SPI_NBITS_SINGLE; | |
1883 | if (xfer->rx_buf && !xfer->rx_nbits) | |
1884 | xfer->rx_nbits = SPI_NBITS_SINGLE; | |
1885 | /* check transfer tx/rx_nbits: | |
1afd9989 GU |
1886 | * 1. check the value matches one of single, dual and quad |
1887 | * 2. check tx/rx_nbits match the mode in spi_device | |
f477b7fb | 1888 | */ |
db90a441 SP |
1889 | if (xfer->tx_buf) { |
1890 | if (xfer->tx_nbits != SPI_NBITS_SINGLE && | |
1891 | xfer->tx_nbits != SPI_NBITS_DUAL && | |
1892 | xfer->tx_nbits != SPI_NBITS_QUAD) | |
1893 | return -EINVAL; | |
1894 | if ((xfer->tx_nbits == SPI_NBITS_DUAL) && | |
1895 | !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD))) | |
1896 | return -EINVAL; | |
1897 | if ((xfer->tx_nbits == SPI_NBITS_QUAD) && | |
1898 | !(spi->mode & SPI_TX_QUAD)) | |
1899 | return -EINVAL; | |
db90a441 | 1900 | } |
f477b7fb | 1901 | /* check transfer rx_nbits */ |
db90a441 SP |
1902 | if (xfer->rx_buf) { |
1903 | if (xfer->rx_nbits != SPI_NBITS_SINGLE && | |
1904 | xfer->rx_nbits != SPI_NBITS_DUAL && | |
1905 | xfer->rx_nbits != SPI_NBITS_QUAD) | |
1906 | return -EINVAL; | |
1907 | if ((xfer->rx_nbits == SPI_NBITS_DUAL) && | |
1908 | !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD))) | |
1909 | return -EINVAL; | |
1910 | if ((xfer->rx_nbits == SPI_NBITS_QUAD) && | |
1911 | !(spi->mode & SPI_RX_QUAD)) | |
1912 | return -EINVAL; | |
db90a441 | 1913 | } |
e6811d1d LD |
1914 | } |
1915 | ||
cf32b71e | 1916 | message->status = -EINPROGRESS; |
90808738 MB |
1917 | |
1918 | return 0; | |
1919 | } | |
1920 | ||
1921 | static int __spi_async(struct spi_device *spi, struct spi_message *message) | |
1922 | { | |
1923 | struct spi_master *master = spi->master; | |
1924 | ||
1925 | message->spi = spi; | |
1926 | ||
1927 | trace_spi_message_submit(message); | |
1928 | ||
cf32b71e ES |
1929 | return master->transfer(spi, message); |
1930 | } | |
1931 | ||
568d0697 DB |
1932 | /** |
1933 | * spi_async - asynchronous SPI transfer | |
1934 | * @spi: device with which data will be exchanged | |
1935 | * @message: describes the data transfers, including completion callback | |
1936 | * Context: any (irqs may be blocked, etc) | |
1937 | * | |
1938 | * This call may be used in_irq and other contexts which can't sleep, | |
1939 | * as well as from task contexts which can sleep. | |
1940 | * | |
1941 | * The completion callback is invoked in a context which can't sleep. | |
1942 | * Before that invocation, the value of message->status is undefined. | |
1943 | * When the callback is issued, message->status holds either zero (to | |
1944 | * indicate complete success) or a negative error code. After that | |
1945 | * callback returns, the driver which issued the transfer request may | |
1946 | * deallocate the associated memory; it's no longer in use by any SPI | |
1947 | * core or controller driver code. | |
1948 | * | |
1949 | * Note that although all messages to a spi_device are handled in | |
1950 | * FIFO order, messages may go to different devices in other orders. | |
1951 | * Some device might be higher priority, or have various "hard" access | |
1952 | * time requirements, for example. | |
1953 | * | |
1954 | * On detection of any fault during the transfer, processing of | |
1955 | * the entire message is aborted, and the device is deselected. | |
1956 | * Until returning from the associated message completion callback, | |
1957 | * no other spi_message queued to that device will be processed. | |
1958 | * (This rule applies equally to all the synchronous transfer calls, | |
1959 | * which are wrappers around this core asynchronous primitive.) | |
1960 | */ | |
1961 | int spi_async(struct spi_device *spi, struct spi_message *message) | |
1962 | { | |
1963 | struct spi_master *master = spi->master; | |
cf32b71e ES |
1964 | int ret; |
1965 | unsigned long flags; | |
568d0697 | 1966 | |
90808738 MB |
1967 | ret = __spi_validate(spi, message); |
1968 | if (ret != 0) | |
1969 | return ret; | |
1970 | ||
cf32b71e | 1971 | spin_lock_irqsave(&master->bus_lock_spinlock, flags); |
568d0697 | 1972 | |
cf32b71e ES |
1973 | if (master->bus_lock_flag) |
1974 | ret = -EBUSY; | |
1975 | else | |
1976 | ret = __spi_async(spi, message); | |
568d0697 | 1977 | |
cf32b71e ES |
1978 | spin_unlock_irqrestore(&master->bus_lock_spinlock, flags); |
1979 | ||
1980 | return ret; | |
568d0697 DB |
1981 | } |
1982 | EXPORT_SYMBOL_GPL(spi_async); | |
1983 | ||
cf32b71e ES |
1984 | /** |
1985 | * spi_async_locked - version of spi_async with exclusive bus usage | |
1986 | * @spi: device with which data will be exchanged | |
1987 | * @message: describes the data transfers, including completion callback | |
1988 | * Context: any (irqs may be blocked, etc) | |
1989 | * | |
1990 | * This call may be used in_irq and other contexts which can't sleep, | |
1991 | * as well as from task contexts which can sleep. | |
1992 | * | |
1993 | * The completion callback is invoked in a context which can't sleep. | |
1994 | * Before that invocation, the value of message->status is undefined. | |
1995 | * When the callback is issued, message->status holds either zero (to | |
1996 | * indicate complete success) or a negative error code. After that | |
1997 | * callback returns, the driver which issued the transfer request may | |
1998 | * deallocate the associated memory; it's no longer in use by any SPI | |
1999 | * core or controller driver code. | |
2000 | * | |
2001 | * Note that although all messages to a spi_device are handled in | |
2002 | * FIFO order, messages may go to different devices in other orders. | |
2003 | * Some device might be higher priority, or have various "hard" access | |
2004 | * time requirements, for example. | |
2005 | * | |
2006 | * On detection of any fault during the transfer, processing of | |
2007 | * the entire message is aborted, and the device is deselected. | |
2008 | * Until returning from the associated message completion callback, | |
2009 | * no other spi_message queued to that device will be processed. | |
2010 | * (This rule applies equally to all the synchronous transfer calls, | |
2011 | * which are wrappers around this core asynchronous primitive.) | |
2012 | */ | |
2013 | int spi_async_locked(struct spi_device *spi, struct spi_message *message) | |
2014 | { | |
2015 | struct spi_master *master = spi->master; | |
2016 | int ret; | |
2017 | unsigned long flags; | |
2018 | ||
90808738 MB |
2019 | ret = __spi_validate(spi, message); |
2020 | if (ret != 0) | |
2021 | return ret; | |
2022 | ||
cf32b71e ES |
2023 | spin_lock_irqsave(&master->bus_lock_spinlock, flags); |
2024 | ||
2025 | ret = __spi_async(spi, message); | |
2026 | ||
2027 | spin_unlock_irqrestore(&master->bus_lock_spinlock, flags); | |
2028 | ||
2029 | return ret; | |
2030 | ||
2031 | } | |
2032 | EXPORT_SYMBOL_GPL(spi_async_locked); | |
2033 | ||
7d077197 DB |
2034 | |
2035 | /*-------------------------------------------------------------------------*/ | |
2036 | ||
2037 | /* Utility methods for SPI master protocol drivers, layered on | |
2038 | * top of the core. Some other utility methods are defined as | |
2039 | * inline functions. | |
2040 | */ | |
2041 | ||
5d870c8e AM |
2042 | static void spi_complete(void *arg) |
2043 | { | |
2044 | complete(arg); | |
2045 | } | |
2046 | ||
cf32b71e ES |
2047 | static int __spi_sync(struct spi_device *spi, struct spi_message *message, |
2048 | int bus_locked) | |
2049 | { | |
2050 | DECLARE_COMPLETION_ONSTACK(done); | |
2051 | int status; | |
2052 | struct spi_master *master = spi->master; | |
2053 | ||
2054 | message->complete = spi_complete; | |
2055 | message->context = &done; | |
2056 | ||
2057 | if (!bus_locked) | |
2058 | mutex_lock(&master->bus_lock_mutex); | |
2059 | ||
2060 | status = spi_async_locked(spi, message); | |
2061 | ||
2062 | if (!bus_locked) | |
2063 | mutex_unlock(&master->bus_lock_mutex); | |
2064 | ||
2065 | if (status == 0) { | |
2066 | wait_for_completion(&done); | |
2067 | status = message->status; | |
2068 | } | |
2069 | message->context = NULL; | |
2070 | return status; | |
2071 | } | |
2072 | ||
8ae12a0d DB |
2073 | /** |
2074 | * spi_sync - blocking/synchronous SPI data transfers | |
2075 | * @spi: device with which data will be exchanged | |
2076 | * @message: describes the data transfers | |
33e34dc6 | 2077 | * Context: can sleep |
8ae12a0d DB |
2078 | * |
2079 | * This call may only be used from a context that may sleep. The sleep | |
2080 | * is non-interruptible, and has no timeout. Low-overhead controller | |
2081 | * drivers may DMA directly into and out of the message buffers. | |
2082 | * | |
2083 | * Note that the SPI device's chip select is active during the message, | |
2084 | * and then is normally disabled between messages. Drivers for some | |
2085 | * frequently-used devices may want to minimize costs of selecting a chip, | |
2086 | * by leaving it selected in anticipation that the next message will go | |
2087 | * to the same chip. (That may increase power usage.) | |
2088 | * | |
0c868461 DB |
2089 | * Also, the caller is guaranteeing that the memory associated with the |
2090 | * message will not be freed before this call returns. | |
2091 | * | |
9b938b74 | 2092 | * It returns zero on success, else a negative error code. |
8ae12a0d DB |
2093 | */ |
2094 | int spi_sync(struct spi_device *spi, struct spi_message *message) | |
2095 | { | |
cf32b71e | 2096 | return __spi_sync(spi, message, 0); |
8ae12a0d DB |
2097 | } |
2098 | EXPORT_SYMBOL_GPL(spi_sync); | |
2099 | ||
cf32b71e ES |
2100 | /** |
2101 | * spi_sync_locked - version of spi_sync with exclusive bus usage | |
2102 | * @spi: device with which data will be exchanged | |
2103 | * @message: describes the data transfers | |
2104 | * Context: can sleep | |
2105 | * | |
2106 | * This call may only be used from a context that may sleep. The sleep | |
2107 | * is non-interruptible, and has no timeout. Low-overhead controller | |
2108 | * drivers may DMA directly into and out of the message buffers. | |
2109 | * | |
2110 | * This call should be used by drivers that require exclusive access to the | |
25985edc | 2111 | * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must |
cf32b71e ES |
2112 | * be released by a spi_bus_unlock call when the exclusive access is over. |
2113 | * | |
2114 | * It returns zero on success, else a negative error code. | |
2115 | */ | |
2116 | int spi_sync_locked(struct spi_device *spi, struct spi_message *message) | |
2117 | { | |
2118 | return __spi_sync(spi, message, 1); | |
2119 | } | |
2120 | EXPORT_SYMBOL_GPL(spi_sync_locked); | |
2121 | ||
2122 | /** | |
2123 | * spi_bus_lock - obtain a lock for exclusive SPI bus usage | |
2124 | * @master: SPI bus master that should be locked for exclusive bus access | |
2125 | * Context: can sleep | |
2126 | * | |
2127 | * This call may only be used from a context that may sleep. The sleep | |
2128 | * is non-interruptible, and has no timeout. | |
2129 | * | |
2130 | * This call should be used by drivers that require exclusive access to the | |
2131 | * SPI bus. The SPI bus must be released by a spi_bus_unlock call when the | |
2132 | * exclusive access is over. Data transfer must be done by spi_sync_locked | |
2133 | * and spi_async_locked calls when the SPI bus lock is held. | |
2134 | * | |
2135 | * It returns zero on success, else a negative error code. | |
2136 | */ | |
2137 | int spi_bus_lock(struct spi_master *master) | |
2138 | { | |
2139 | unsigned long flags; | |
2140 | ||
2141 | mutex_lock(&master->bus_lock_mutex); | |
2142 | ||
2143 | spin_lock_irqsave(&master->bus_lock_spinlock, flags); | |
2144 | master->bus_lock_flag = 1; | |
2145 | spin_unlock_irqrestore(&master->bus_lock_spinlock, flags); | |
2146 | ||
2147 | /* mutex remains locked until spi_bus_unlock is called */ | |
2148 | ||
2149 | return 0; | |
2150 | } | |
2151 | EXPORT_SYMBOL_GPL(spi_bus_lock); | |
2152 | ||
2153 | /** | |
2154 | * spi_bus_unlock - release the lock for exclusive SPI bus usage | |
2155 | * @master: SPI bus master that was locked for exclusive bus access | |
2156 | * Context: can sleep | |
2157 | * | |
2158 | * This call may only be used from a context that may sleep. The sleep | |
2159 | * is non-interruptible, and has no timeout. | |
2160 | * | |
2161 | * This call releases an SPI bus lock previously obtained by an spi_bus_lock | |
2162 | * call. | |
2163 | * | |
2164 | * It returns zero on success, else a negative error code. | |
2165 | */ | |
2166 | int spi_bus_unlock(struct spi_master *master) | |
2167 | { | |
2168 | master->bus_lock_flag = 0; | |
2169 | ||
2170 | mutex_unlock(&master->bus_lock_mutex); | |
2171 | ||
2172 | return 0; | |
2173 | } | |
2174 | EXPORT_SYMBOL_GPL(spi_bus_unlock); | |
2175 | ||
a9948b61 | 2176 | /* portable code must never pass more than 32 bytes */ |
5fe5f05e | 2177 | #define SPI_BUFSIZ max(32, SMP_CACHE_BYTES) |
8ae12a0d DB |
2178 | |
2179 | static u8 *buf; | |
2180 | ||
2181 | /** | |
2182 | * spi_write_then_read - SPI synchronous write followed by read | |
2183 | * @spi: device with which data will be exchanged | |
2184 | * @txbuf: data to be written (need not be dma-safe) | |
2185 | * @n_tx: size of txbuf, in bytes | |
27570497 JP |
2186 | * @rxbuf: buffer into which data will be read (need not be dma-safe) |
2187 | * @n_rx: size of rxbuf, in bytes | |
33e34dc6 | 2188 | * Context: can sleep |
8ae12a0d DB |
2189 | * |
2190 | * This performs a half duplex MicroWire style transaction with the | |
2191 | * device, sending txbuf and then reading rxbuf. The return value | |
2192 | * is zero for success, else a negative errno status code. | |
b885244e | 2193 | * This call may only be used from a context that may sleep. |
8ae12a0d | 2194 | * |
0c868461 | 2195 | * Parameters to this routine are always copied using a small buffer; |
33e34dc6 DB |
2196 | * portable code should never use this for more than 32 bytes. |
2197 | * Performance-sensitive or bulk transfer code should instead use | |
0c868461 | 2198 | * spi_{async,sync}() calls with dma-safe buffers. |
8ae12a0d DB |
2199 | */ |
2200 | int spi_write_then_read(struct spi_device *spi, | |
0c4a1590 MB |
2201 | const void *txbuf, unsigned n_tx, |
2202 | void *rxbuf, unsigned n_rx) | |
8ae12a0d | 2203 | { |
068f4070 | 2204 | static DEFINE_MUTEX(lock); |
8ae12a0d DB |
2205 | |
2206 | int status; | |
2207 | struct spi_message message; | |
bdff549e | 2208 | struct spi_transfer x[2]; |
8ae12a0d DB |
2209 | u8 *local_buf; |
2210 | ||
b3a223ee MB |
2211 | /* Use preallocated DMA-safe buffer if we can. We can't avoid |
2212 | * copying here, (as a pure convenience thing), but we can | |
2213 | * keep heap costs out of the hot path unless someone else is | |
2214 | * using the pre-allocated buffer or the transfer is too large. | |
8ae12a0d | 2215 | */ |
b3a223ee | 2216 | if ((n_tx + n_rx) > SPI_BUFSIZ || !mutex_trylock(&lock)) { |
2cd94c8a MB |
2217 | local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx), |
2218 | GFP_KERNEL | GFP_DMA); | |
b3a223ee MB |
2219 | if (!local_buf) |
2220 | return -ENOMEM; | |
2221 | } else { | |
2222 | local_buf = buf; | |
2223 | } | |
8ae12a0d | 2224 | |
8275c642 | 2225 | spi_message_init(&message); |
5fe5f05e | 2226 | memset(x, 0, sizeof(x)); |
bdff549e DB |
2227 | if (n_tx) { |
2228 | x[0].len = n_tx; | |
2229 | spi_message_add_tail(&x[0], &message); | |
2230 | } | |
2231 | if (n_rx) { | |
2232 | x[1].len = n_rx; | |
2233 | spi_message_add_tail(&x[1], &message); | |
2234 | } | |
8275c642 | 2235 | |
8ae12a0d | 2236 | memcpy(local_buf, txbuf, n_tx); |
bdff549e DB |
2237 | x[0].tx_buf = local_buf; |
2238 | x[1].rx_buf = local_buf + n_tx; | |
8ae12a0d DB |
2239 | |
2240 | /* do the i/o */ | |
8ae12a0d | 2241 | status = spi_sync(spi, &message); |
9b938b74 | 2242 | if (status == 0) |
bdff549e | 2243 | memcpy(rxbuf, x[1].rx_buf, n_rx); |
8ae12a0d | 2244 | |
bdff549e | 2245 | if (x[0].tx_buf == buf) |
068f4070 | 2246 | mutex_unlock(&lock); |
8ae12a0d DB |
2247 | else |
2248 | kfree(local_buf); | |
2249 | ||
2250 | return status; | |
2251 | } | |
2252 | EXPORT_SYMBOL_GPL(spi_write_then_read); | |
2253 | ||
2254 | /*-------------------------------------------------------------------------*/ | |
2255 | ||
2256 | static int __init spi_init(void) | |
2257 | { | |
b885244e DB |
2258 | int status; |
2259 | ||
e94b1766 | 2260 | buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL); |
b885244e DB |
2261 | if (!buf) { |
2262 | status = -ENOMEM; | |
2263 | goto err0; | |
2264 | } | |
2265 | ||
2266 | status = bus_register(&spi_bus_type); | |
2267 | if (status < 0) | |
2268 | goto err1; | |
8ae12a0d | 2269 | |
b885244e DB |
2270 | status = class_register(&spi_master_class); |
2271 | if (status < 0) | |
2272 | goto err2; | |
8ae12a0d | 2273 | return 0; |
b885244e DB |
2274 | |
2275 | err2: | |
2276 | bus_unregister(&spi_bus_type); | |
2277 | err1: | |
2278 | kfree(buf); | |
2279 | buf = NULL; | |
2280 | err0: | |
2281 | return status; | |
8ae12a0d | 2282 | } |
b885244e | 2283 | |
8ae12a0d DB |
2284 | /* board_info is normally registered in arch_initcall(), |
2285 | * but even essential drivers wait till later | |
b885244e DB |
2286 | * |
2287 | * REVISIT only boardinfo really needs static linking. the rest (device and | |
2288 | * driver registration) _could_ be dynamically linked (modular) ... costs | |
2289 | * include needing to have boardinfo data structures be much more public. | |
8ae12a0d | 2290 | */ |
673c0c00 | 2291 | postcore_initcall(spi_init); |
8ae12a0d | 2292 |