[deliverable/linux.git] / drivers / staging / ipack / bridges / tpci200.h

/**
 * tpci200.h
 *
 * driver for the carrier TEWS TPCI-200
 * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
 * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
 * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; version 2 of the License.
 */

#ifndef _TPCI200_H_
#define _TPCI200_H_

#include <linux/limits.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/swab.h>
#include <linux/io.h>

#include "../ipack.h"

#define TPCI200_NB_SLOT               0x4
#define TPCI200_NB_BAR                0x6

#define TPCI200_VENDOR_ID             0x1498
#define TPCI200_DEVICE_ID             0x30C8
#define TPCI200_SUBVENDOR_ID          0x1498
#define TPCI200_SUBDEVICE_ID          0x300A

#define TPCI200_CFG_MEM_BAR           0
#define TPCI200_IP_INTERFACE_BAR      2
#define TPCI200_IO_ID_INT_SPACES_BAR  3
#define TPCI200_MEM16_SPACE_BAR       4
#define TPCI200_MEM8_SPACE_BAR        5

struct tpci200_regs {
	__le16	revision;
	/* writes to control should occur with the mutex held to protect
	 * read-modify-write operations */
	__le16  control[4];
	__le16	reset;
	__le16	status;
	u8	reserved[242];
} __packed;

#define TPCI200_IFACE_SIZE            0x100

#define TPCI200_IO_SPACE_OFF          0x0000
#define TPCI200_IO_SPACE_GAP          0x0100
#define TPCI200_IO_SPACE_SIZE         0x0080
#define TPCI200_ID_SPACE_OFF          0x0080
#define TPCI200_ID_SPACE_GAP          0x0100
#define TPCI200_ID_SPACE_SIZE         0x0040
#define TPCI200_INT_SPACE_OFF         0x00C0
#define TPCI200_INT_SPACE_GAP         0x0100
#define TPCI200_INT_SPACE_SIZE        0x0040
#define TPCI200_IOIDINT_SIZE          0x0400

#define TPCI200_MEM8_GAP              0x00400000
#define TPCI200_MEM8_SIZE             0x00400000
#define TPCI200_MEM16_GAP             0x00800000
#define TPCI200_MEM16_SIZE            0x00800000

/* control field in tpci200_regs */
#define TPCI200_INT0_EN               0x0040
#define TPCI200_INT1_EN               0x0080
#define TPCI200_INT0_EDGE             0x0010
#define TPCI200_INT1_EDGE             0x0020
#define TPCI200_ERR_INT_EN            0x0008
#define TPCI200_TIME_INT_EN           0x0004
#define TPCI200_RECOVER_EN            0x0002
#define TPCI200_CLK32                 0x0001

/* reset field in tpci200_regs */
#define TPCI200_A_RESET               0x0001
#define TPCI200_B_RESET               0x0002
#define TPCI200_C_RESET               0x0004
#define TPCI200_D_RESET               0x0008

/* status field in tpci200_regs */
#define TPCI200_A_TIMEOUT             0x1000
#define TPCI200_B_TIMEOUT             0x2000
#define TPCI200_C_TIMEOUT             0x4000
#define TPCI200_D_TIMEOUT             0x8000

#define TPCI200_A_ERROR               0x0100
#define TPCI200_B_ERROR               0x0200
#define TPCI200_C_ERROR               0x0400
#define TPCI200_D_ERROR               0x0800

#define TPCI200_A_INT0                0x0001
#define TPCI200_A_INT1                0x0002
#define TPCI200_B_INT0                0x0004
#define TPCI200_B_INT1                0x0008
#define TPCI200_C_INT0                0x0010
#define TPCI200_C_INT1                0x0020
#define TPCI200_D_INT0                0x0040
#define TPCI200_D_INT1                0x0080

#define TPCI200_SLOT_INT_MASK         0x00FF

/* PCI Configuration registers. The PCI bridge is a PLX Technology PCI9030. */
#define LAS1_DESC		      0x2C
#define LAS2_DESC		      0x30

/* Bits in the LAS?_DESC registers */
#define LAS_BIT_BIGENDIAN	      24

#define VME_IOID_SPACE  "IOID"
#define VME_MEM_SPACE  "MEM"

/**
 * struct slot_irq - slot IRQ definition.
 * @vector	Vector number
 * @handler	Handler called when IRQ arrives
 * @arg		Handler argument
 *
 */
struct slot_irq {
	struct ipack_device *holder;
	int		vector;
	irqreturn_t	(*handler)(void *);
	void		*arg;
};

/**
 * struct tpci200_slot - data specific to the tpci200 slot.
 * @slot_id	Slot identification gived to external interface
 * @irq		Slot IRQ infos
 * @io_phys	IO physical base address register of the slot
 * @id_phys	ID physical base address register of the slot
 * @int_phys	INT physical base address register of the slot
 * @mem_phys	MEM physical base address register of the slot
 *
 */
struct tpci200_slot {
	struct slot_irq		*irq;
	struct ipack_addr_space io_phys;
	struct ipack_addr_space id_phys;
	struct ipack_addr_space int_phys;
	struct ipack_addr_space mem_phys;
};

/**
 * struct tpci200_infos - informations specific of the TPCI200 tpci200.
 * @pci_dev		PCI device
 * @interface_regs	Pointer to IP interface space (Bar 2)
 * @ioidint_space	Pointer to IP ID, IO and INT space (Bar 3)
 * @mem8_space		Pointer to MEM space (Bar 4)
 *
 */
struct tpci200_infos {
	struct pci_dev			*pdev;
	struct pci_device_id		*id_table;
	struct tpci200_regs __iomem	*interface_regs;
	void __iomem			*ioidint_space;
	void __iomem			*mem8_space;
	void __iomem			*cfg_regs;
	struct ipack_bus_device		*ipack_bus;
};
struct tpci200_board {
	unsigned int		number;
	struct mutex		mutex;
	spinlock_t		regs_lock;
	struct tpci200_slot	*slots;
	struct tpci200_infos	*info;
};

#endif /* _TPCI200_H_ */
Commit	Line	Data
0eeca14f SIG	1	/**
	2	* tpci200.h
	3	*
	4	* driver for the carrier TEWS TPCI-200
	5	* Copyright (c) 2009 Nicolas Serafini, EIC2 SA
	6	* Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
	7	* Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
	8	*
	9	* This program is free software; you can redistribute it and/or modify it
	10	* under the terms of the GNU General Public License as published by the Free
b995069a	11	* Software Foundation; version 2 of the License.
0eeca14f SIG	12	*/
	13
	14	#ifndef _TPCI200_H_
	15	#define _TPCI200_H_
	16
0eeca14f SIG	17	#include <linux/limits.h>
	18	#include <linux/pci.h>
	19	#include <linux/spinlock.h>
0eeca14f SIG	20	#include <linux/swab.h>
	21	#include <linux/io.h>
	22
	23	#include "../ipack.h"
	24
0eeca14f SIG	25	#define TPCI200_NB_SLOT 0x4
	26	#define TPCI200_NB_BAR 0x6
	27
	28	#define TPCI200_VENDOR_ID 0x1498
	29	#define TPCI200_DEVICE_ID 0x30C8
	30	#define TPCI200_SUBVENDOR_ID 0x1498
	31	#define TPCI200_SUBDEVICE_ID 0x300A
	32
cea2f7cd	33	#define TPCI200_CFG_MEM_BAR 0
0eeca14f SIG	34	#define TPCI200_IP_INTERFACE_BAR 2
	35	#define TPCI200_IO_ID_INT_SPACES_BAR 3
	36	#define TPCI200_MEM16_SPACE_BAR 4
	37	#define TPCI200_MEM8_SPACE_BAR 5
	38
28086cbd	39	struct tpci200_regs {
7dd73b86	40	__le16 revision;
28086cbd JT	41	/* writes to control should occur with the mutex held to protect
28086cbd JT	42	* read-modify-write operations */
7dd73b86 JT	43	__le16 control[4];
	44	__le16 reset;
	45	__le16 status;
28086cbd JT	46	u8 reserved[242];
28086cbd JT	47	} __packed;
0eeca14f SIG	48
	49	#define TPCI200_IFACE_SIZE 0x100
	50
	51	#define TPCI200_IO_SPACE_OFF 0x0000
	52	#define TPCI200_IO_SPACE_GAP 0x0100
	53	#define TPCI200_IO_SPACE_SIZE 0x0080
	54	#define TPCI200_ID_SPACE_OFF 0x0080
	55	#define TPCI200_ID_SPACE_GAP 0x0100
	56	#define TPCI200_ID_SPACE_SIZE 0x0040
	57	#define TPCI200_INT_SPACE_OFF 0x00C0
	58	#define TPCI200_INT_SPACE_GAP 0x0100
	59	#define TPCI200_INT_SPACE_SIZE 0x0040
	60	#define TPCI200_IOIDINT_SIZE 0x0400
	61
	62	#define TPCI200_MEM8_GAP 0x00400000
	63	#define TPCI200_MEM8_SIZE 0x00400000
	64	#define TPCI200_MEM16_GAP 0x00800000
	65	#define TPCI200_MEM16_SIZE 0x00800000
	66
28086cbd	67	/* control field in tpci200_regs */
0eeca14f SIG	68	#define TPCI200_INT0_EN 0x0040
	69	#define TPCI200_INT1_EN 0x0080
	70	#define TPCI200_INT0_EDGE 0x0010
	71	#define TPCI200_INT1_EDGE 0x0020
	72	#define TPCI200_ERR_INT_EN 0x0008
	73	#define TPCI200_TIME_INT_EN 0x0004
	74	#define TPCI200_RECOVER_EN 0x0002
	75	#define TPCI200_CLK32 0x0001
	76
28086cbd	77	/* reset field in tpci200_regs */
0eeca14f SIG	78	#define TPCI200_A_RESET 0x0001
	79	#define TPCI200_B_RESET 0x0002
	80	#define TPCI200_C_RESET 0x0004
	81	#define TPCI200_D_RESET 0x0008
	82
28086cbd	83	/* status field in tpci200_regs */
0eeca14f SIG	84	#define TPCI200_A_TIMEOUT 0x1000
	85	#define TPCI200_B_TIMEOUT 0x2000
	86	#define TPCI200_C_TIMEOUT 0x4000
	87	#define TPCI200_D_TIMEOUT 0x8000
	88
	89	#define TPCI200_A_ERROR 0x0100
	90	#define TPCI200_B_ERROR 0x0200
	91	#define TPCI200_C_ERROR 0x0400
	92	#define TPCI200_D_ERROR 0x0800
	93
	94	#define TPCI200_A_INT0 0x0001
	95	#define TPCI200_A_INT1 0x0002
	96	#define TPCI200_B_INT0 0x0004
	97	#define TPCI200_B_INT1 0x0008
	98	#define TPCI200_C_INT0 0x0010
	99	#define TPCI200_C_INT1 0x0020
	100	#define TPCI200_D_INT0 0x0040
	101	#define TPCI200_D_INT1 0x0080
	102
	103	#define TPCI200_SLOT_INT_MASK 0x00FF
	104
cea2f7cd JT	105	/* PCI Configuration registers. The PCI bridge is a PLX Technology PCI9030. */
	106	#define LAS1_DESC 0x2C
	107	#define LAS2_DESC 0x30
	108
	109	/* Bits in the LAS?_DESC registers */
	110	#define LAS_BIT_BIGENDIAN 24
	111
0eeca14f SIG	112	#define VME_IOID_SPACE "IOID"
	113	#define VME_MEM_SPACE "MEM"
	114
	115	/**
	116	* struct slot_irq - slot IRQ definition.
	117	* @vector Vector number
	118	* @handler Handler called when IRQ arrives
	119	* @arg Handler argument
0eeca14f SIG	120	*
	121	*/
	122	struct slot_irq {
6f2c12ae	123	struct ipack_device *holder;
611b564d	124	int vector;
faa75c40	125	irqreturn_t (handler)(void );
611b564d	126	void *arg;
0eeca14f SIG	127	};
	128
	129	/**
	130	* struct tpci200_slot - data specific to the tpci200 slot.
	131	* @slot_id Slot identification gived to external interface
	132	* @irq Slot IRQ infos
	133	* @io_phys IO physical base address register of the slot
	134	* @id_phys ID physical base address register of the slot
e4af9497	135	* @int_phys INT physical base address register of the slot
0eeca14f SIG	136	* @mem_phys MEM physical base address register of the slot
	137	*
	138	*/
	139	struct tpci200_slot {
0eeca14f SIG	140	struct slot_irq *irq;
	141	struct ipack_addr_space io_phys;
	142	struct ipack_addr_space id_phys;
e4af9497	143	struct ipack_addr_space int_phys;
0eeca14f SIG	144	struct ipack_addr_space mem_phys;
	145	};
	146
	147	/**
	148	* struct tpci200_infos - informations specific of the TPCI200 tpci200.
	149	* @pci_dev PCI device
	150	* @interface_regs Pointer to IP interface space (Bar 2)
	151	* @ioidint_space Pointer to IP ID, IO and INT space (Bar 3)
	152	* @mem8_space Pointer to MEM space (Bar 4)
0eeca14f SIG	153	*
	154	*/
	155	struct tpci200_infos {
	156	struct pci_dev *pdev;
	157	struct pci_device_id *id_table;
28086cbd	158	struct tpci200_regs __iomem *interface_regs;
5a81b4a0 SIG	159	void __iomem *ioidint_space;
5a81b4a0 SIG	160	void __iomem *mem8_space;
cea2f7cd	161	void __iomem *cfg_regs;
ec440335	162	struct ipack_bus_device *ipack_bus;
0eeca14f SIG	163	};
0eeca14f SIG	164	struct tpci200_board {
0eeca14f SIG	165	unsigned int number;
0eeca14f SIG	166	struct mutex mutex;
487e0a60	167	spinlock_t regs_lock;
0eeca14f SIG	168	struct tpci200_slot *slots;
	169	struct tpci200_infos *info;
	170	};
	171
	172	#endif /* _TPCI200_H_ */