ipsec: update MAX_AH_AUTH_LEN to support sha512
[deliverable/linux.git] / drivers / staging / rtl8712 / rtl8712_recv.h
CommitLineData
2865d42c
LF
1#ifndef _RTL8712_RECV_H_
2#define _RTL8712_RECV_H_
3
4#include "osdep_service.h"
5#include "drv_types.h"
6
7#define NR_RECVBUFF (8)
8#define NR_PREALLOC_RECV_SKB (8)
9#define RXDESC_SIZE 24
10#define RXDESC_OFFSET RXDESC_SIZE
11#define RECV_BLK_SZ 512
12#define RECV_BLK_CNT 16
13#define RECV_BLK_TH RECV_BLK_CNT
14#define MAX_RECVBUF_SZ (30720) /* 30K */
15#define RECVBUFF_ALIGN_SZ 512
16#define RSVD_ROOM_SZ (0)
17/*These definition is used for Rx packet reordering.*/
18#define SN_LESS(a, b) (((a-b) & 0x800) != 0)
19#define SN_EQUAL(a, b) (a == b)
20#define REORDER_WAIT_TIME 30 /* (ms)*/
21
22struct recv_stat {
23 unsigned int rxdw0;
24 unsigned int rxdw1;
25 unsigned int rxdw2;
26 unsigned int rxdw3;
27 unsigned int rxdw4;
28 unsigned int rxdw5;
29};
30
31struct phy_cck_rx_status {
32 /* For CCK rate descriptor. This is a unsigned 8:1 variable.
33 * LSB bit present 0.5. And MSB 7 bts present a signed value.
34 * Range from -64~+63.5. */
35 u8 adc_pwdb_X[4];
36 u8 sq_rpt;
37 u8 cck_agc_rpt;
38};
39
40struct phy_stat {
41 unsigned int phydw0;
42 unsigned int phydw1;
43 unsigned int phydw2;
44 unsigned int phydw3;
45 unsigned int phydw4;
46 unsigned int phydw5;
47 unsigned int phydw6;
48 unsigned int phydw7;
49};
50#define PHY_STAT_GAIN_TRSW_SHT 0
51#define PHY_STAT_PWDB_ALL_SHT 4
52#define PHY_STAT_CFOSHO_SHT 5
53#define PHY_STAT_CCK_AGC_RPT_SHT 5
54#define PHY_STAT_CFOTAIL_SHT 9
55#define PHY_STAT_RXEVM_SHT 13
56#define PHY_STAT_RXSNR_SHT 15
57#define PHY_STAT_PDSNR_SHT 19
58#define PHY_STAT_CSI_CURRENT_SHT 21
59#define PHY_STAT_CSI_TARGET_SHT 23
60#define PHY_STAT_SIGEVM_SHT 25
61#define PHY_STAT_MAX_EX_PWR_SHT 26
62
63union recvstat {
64 struct recv_stat recv_stat;
65 unsigned int value[RXDESC_SIZE>>2];
66};
67
68
69struct recv_buf {
70 struct list_head list;
71 spinlock_t recvbuf_lock;
72 u32 ref_cnt;
73 struct _adapter *adapter;
74 struct urb *purb;
75 _pkt *pskb;
76 u8 reuse;
77 u8 irp_pending;
78 u32 transfer_len;
79 uint len;
80 u8 *phead;
81 u8 *pdata;
82 u8 *ptail;
83 u8 *pend;
84 u8 *pbuf;
85 u8 *pallocated_buf;
86};
87
88/*
89 head ----->
90 data ----->
91 payload
92 tail ----->
93 end ----->
94 len = (unsigned int )(tail - data);
95*/
96struct recv_frame_hdr{
97 struct list_head list;
98 _pkt *pkt;
99 _pkt *pkt_newalloc;
100 struct _adapter *adapter;
101 u8 fragcnt;
102 struct rx_pkt_attrib attrib;
103 uint len;
104 u8 *rx_head;
105 u8 *rx_data;
106 u8 *rx_tail;
107 u8 *rx_end;
108 void *precvbuf;
109 struct sta_info *psta;
110 /*for A-MPDU Rx reordering buffer control*/
111 struct recv_reorder_ctrl *preorder_ctrl;
112};
113
114union recv_frame {
115 union {
116 struct list_head list;
117 struct recv_frame_hdr hdr;
118 addr_t mem[RECVFRAME_HDR_ALIGN>>2];
119 } u;
120};
121
122int r8712_init_recvbuf(struct _adapter *padapter, struct recv_buf *precvbuf);
123void r8712_rxcmd_event_hdl(struct _adapter *padapter, void *prxcmdbuf);
124s32 r8712_signal_scale_mapping(s32 cur_sig);
125void r8712_reordering_ctrl_timeout_handler(void *pcontext);
126
127#endif
128
This page took 0.076184 seconds and 5 git commands to generate.