projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
staging: wilc1000: remove WILC_Uint32
[deliverable/linux.git] / drivers / staging / wilc1000 / wilc_wlan_if.h
CommitLineData
c5c77ba1
JK		 1/* ////////////////////////////////////////////////////////////////////////// */
2/* */
3/* Copyright (c) Atmel Corporation. All rights reserved. */
4/* */
5/* Module Name: wilc_wlan_if.h */
6/* */
7/* */
8/* ///////////////////////////////////////////////////////////////////////// */
9
10
11#ifndef WILC_WLAN_IF_H
12#define WILC_WLAN_IF_H
13
14/*bug 3887: [AP] Allow Management frames to be passed to the host*/
15#define WILC_AP_EXTERNAL_MLME
16#define WILC_P2P
17#define TCP_ENHANCEMENTS
18/* #define MEMORY_STATIC */
19/* #define WILC_FULLY_HOSTING_AP */
20/* #define USE_OLD_SPI_SW */
21
22
23#include "wilc_type.h"
24#include "linux_wlan_common.h"
25
26
27/********************************************
28 *
29 * Debug Flags
30 *
31 ********************************************/
32
33#define N_INIT 0x00000001
34#define N_ERR 0x00000002
35#define N_TXQ 0x00000004
36#define N_INTR 0x00000008
37#define N_RXQ 0x00000010
38
39/********************************************
40 *
41 * Host Interface Defines
42 *
43 ********************************************/
44
45#define HIF_SDIO (0)
46#define HIF_SPI (1 << 0)
47#define HIF_SDIO_GPIO_IRQ (1 << 2)
48
49
50/********************************************
51 *
52 * Tx/Rx Buffer Size Defines
53 *
54 ********************************************/
55
56#define CE_TX_BUFFER_SIZE (64 * 1024)
57#define CE_RX_BUFFER_SIZE (384 * 1024)
58
59/********************************************
60 *
61 * Wlan Interface Defines
62 *
63 ********************************************/
64
65typedef struct {
66 uint32_t read_write: 1;
67 uint32_t function: 3;
68 uint32_t raw: 1;
69 uint32_t address: 17;
70 uint32_t data: 8;
71} sdio_cmd52_t;
72
73typedef struct {
74 /* struct { */
75 uint32_t read_write: 1;
76 uint32_t function: 3;
77 uint32_t block_mode: 1;
78 uint32_t increment: 1;
79 uint32_t address: 17;
80 uint32_t count: 9;
81 /* } bit; */
82 uint8_t *buffer;
83 uint32_t block_size;
84} sdio_cmd53_t;
85
86typedef struct {
87 void (*os_sleep)(uint32_t);
88 void (*os_atomic_sleep)(uint32_t);
89 void (*os_debug)(uint8_t *);
90 void *(*os_malloc)(uint32_t);
91 void *(*os_malloc_atomic)(uint32_t);
92 void (*os_free)(void *);
93 void (*os_lock)(void *);
94 void (*os_unlock)(void *);
4e4467fd 95 int (*os_wait)(void *, u32);
c5c77ba1
JK		 96 void (*os_signal)(void *);
97 void (*os_enter_cs)(void *);
98 void (*os_leave_cs)(void *);
99
100 /*Added by Amr - BugID_4720*/
101 void (*os_spin_lock)(void *, unsigned long *);
102 void (*os_spin_unlock)(void *, unsigned long *);
103
104} wilc_wlan_os_func_t;
105
106typedef struct {
107 int io_type;
108 int (*io_init)(void *);
109 void (*io_deinit)(void *);
110 union {
111 struct {
112 int (*sdio_cmd52)(sdio_cmd52_t *);
113 int (*sdio_cmd53)(sdio_cmd53_t *);
114 int (*sdio_set_max_speed)(void);
115 int (*sdio_set_default_speed)(void);
116 } sdio;
117 struct {
118 int (*spi_max_speed)(void);
119 int (*spi_tx)(uint8_t *, uint32_t);
120 int (*spi_rx)(uint8_t *, uint32_t);
121 int (*spi_trx)(uint8_t *, uint8_t *, uint32_t);
122 } spi;
123 } u;
124} wilc_wlan_io_func_t;
125
126typedef struct {
127 void (*rx_indicate)(uint8_t *, uint32_t, uint32_t);
128 void (*rx_complete)(void);
129} wilc_wlan_net_func_t;
130
131typedef struct {
132 void (*mac_indicate)(int);
133} wilc_wlan_indicate_func_t;
134#define WILC_MAC_INDICATE_STATUS 0x1
135#define WILC_MAC_STATUS_INIT -1
136#define WILC_MAC_STATUS_READY 0
137#define WILC_MAC_STATUS_CONNECT 1
138
139#define WILC_MAC_INDICATE_SCAN 0x2
140
141typedef struct {
142 void *os_private;
143
144 void *hif_critical_section;
145
146 uint32_t tx_buffer_size;
147 void *txq_critical_section;
148
149 /*Added by Amr - BugID_4720*/
150 void *txq_add_to_head_critical_section;
151 void *txq_spin_lock;
152
153 void *txq_wait_event;
154
155#if defined(MEMORY_STATIC)
156 uint32_t rx_buffer_size;
157#endif
158 void *rxq_critical_section;
159 void *rxq_wait_event;
160
161 void *cfg_wait_event;
162} wilc_wlan_os_context_t;
163
164typedef struct {
165 wilc_wlan_os_context_t os_context;
166 wilc_wlan_os_func_t os_func;
167 wilc_wlan_io_func_t io_func;
168 wilc_wlan_net_func_t net_func;
169 wilc_wlan_indicate_func_t indicate_func;
170} wilc_wlan_inp_t;
171
172#if 0
173typedef struct {
174 int start;
175 uint32_t id;
176 void *buffer;
177 uint32_t buffer_size;
178 int commit;
179} wilc_wlan_cfg_set_t;
180
181typedef struct {
182 int start;
183 uint32_t id;
184 int commit;
185} wilc_wlan_cfg_get_t;
186
187typedef struct {
188 uint32_t id;
189 void *buffer;
190 uint32_t buffer_size;
191} wilc_wlan_cfg_val_t;
192#endif
193
194struct tx_complete_data {
195 #ifdef WILC_FULLY_HOSTING_AP
196 struct tx_complete_data *next;
197 #endif
198 int size;
199 void *buff;
200 uint8_t *pBssid;
201 struct sk_buff *skb;
202};
203
204
205typedef void (*wilc_tx_complete_func_t)(void *, int);
206
207#define WILC_TX_ERR_NO_BUF (-2)
208
209typedef struct {
210 int (*wlan_firmware_download)(const uint8_t *, uint32_t);
211 int (*wlan_start)(void);
212 int (*wlan_stop)(void);
213 int (*wlan_add_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t);
214 int (*wlan_handle_tx_que)(uint32_t *);
215 void (*wlan_handle_rx_que)(void);
216 void (*wlan_handle_rx_isr)(void);
217 void (*wlan_cleanup)(void);
218 int (*wlan_cfg_set)(int, uint32_t, uint8_t *, uint32_t, int, uint32_t);
219 int (*wlan_cfg_get)(int, uint32_t, int, uint32_t);
220 int (*wlan_cfg_get_value)(uint32_t, uint8_t *, uint32_t);
221 /*Bug3959: transmitting mgmt frames received from host*/
222 #if defined(WILC_AP_EXTERNAL_MLME) || defined(WILC_P2P)
223 int (*wlan_add_mgmt_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t);
224
225 #ifdef WILC_FULLY_HOSTING_AP
226 int (*wlan_add_data_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t);
227 #endif
228
229 #endif
230} wilc_wlan_oup_t;
231
232/********************************************
233 *
234 * Wlan Configuration ID
235 *
236 ********************************************/
237
238#define MAX_SSID_LEN 33
239#define MAX_RATES_SUPPORTED 12
240
4e4467fd 241#define INFINITE_SLEEP_TIME ((u32)0xFFFFFFFF)
c5c77ba1
JK		 242
243#ifdef WILC_PARSE_SCAN_IN_HOST
244typedef enum {
245 SUPP_RATES_IE = 1,
246 EXT_SUPP_RATES_IE = 50,
247 HT_CAPABILITY_IE = 45,
248 RSN_IE = 48,
249 WPA_IE = 221,
250 WMM_IE = 221,
251 #ifdef WILC_P2P
252 P2P_IE = 221,
253 #endif
254} BEACON_IE;
255#endif
256typedef enum {
257 INFRASTRUCTURE = 0,
258 INDEPENDENT,
259 AP,
260} BSSTYPE_T;
261
262typedef enum {
263 RATE_AUTO = 0,
264 RATE_1MB = 1,
265 RATE_2MB = 2,
266 RATE_5MB = 5,
267 RATE_6MB = 6,
268 RATE_9MB = 9,
269 RATE_11MB = 11,
270 RATE_12MB = 12,
271 RATE_18MB = 18,
272 RATE_24MB = 24,
273 RATE_26MB = 36,
274 RATE_48MB = 48,
275 RATE_54MB = 54
276} TX_RATE_T;
277
278typedef enum {
279 B_ONLY_MODE = 0, /* basic rate: 1, 2 Mbps, otherwise: 5, 11 Mbps */
280 G_ONLY_MODE, /* basic rate: 6, 12, 24 Mbps, otherwise: 9, 18, 36, 48, 54 Mbps */
281 G_MIXED_11B_1_MODE, /* basic rate: 1, 2, 5.5, 11 Mbps, otherwise: all on */
282 G_MIXED_11B_2_MODE, /* basic rate: 1, 2, 5, 11, 6, 12, 24 Mbps, otherwise: all on */
283} G_OPERATING_MODE_T;
284
285typedef enum {
286 G_SHORT_PREAMBLE = 0, /* Short Preamble */
287 G_LONG_PREAMBLE = 1, /* Long Preamble */
288 G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */
289} G_PREAMBLE_T;
290
291#define MAC_CONNECTED 1
292#define MAC_DISCONNECTED 0
293
294/*bug3819: */
295#define SCAN_DONE TRUE
296typedef enum {
297 PASSIVE_SCAN = 0,
298 ACTIVE_SCAN = 1,
299} SCANTYPE_T;
300
301typedef enum {
302 NO_POWERSAVE = 0,
303 MIN_FAST_PS = 1,
304 MAX_FAST_PS = 2,
305 MIN_PSPOLL_PS = 3,
306 MAX_PSPOLL_PS = 4
307} USER_PS_MODE_T;
308
309typedef enum {
310 CHIP_WAKEDUP = 0,
311 CHIP_SLEEPING_AUTO = 1,
312 CHIP_SLEEPING_MANUAL = 2
313} CHIP_PS_STATE_T;
314
315typedef enum {
316 ACQUIRE_ONLY = 0,
317 ACQUIRE_AND_WAKEUP = 1,
318} BUS_ACQUIRE_T;
319
320typedef enum {
321 RELEASE_ONLY = 0,
322 RELEASE_ALLOW_SLEEP = 1,
323} BUS_RELEASE_T;
324
325typedef enum {
326 NO_SECURITY = 0,
327 WEP_40 = 0x3,
328 WEP_104 = 0x7,
329 WPA_AES = 0x29,
330 WPA_TKIP = 0x49,
331 WPA_AES_TKIP = 0x69, /* Aes or Tkip */
332 WPA2_AES = 0x31,
333 WPA2_TKIP = 0x51,
334 WPA2_AES_TKIP = 0x71, /* Aes or Tkip */
335} SECURITY_T;
336
337typedef enum {
338 OPEN_SYSTEM = 1,
339 SHARED_KEY = 2,
340 ANY = 3,
341 IEEE8021 = 5
342} AUTHTYPE_T;
343
344typedef enum {
345 SITE_SURVEY_1CH = 0,
346 SITE_SURVEY_ALL_CH = 1,
347 SITE_SURVEY_OFF = 2
348} SITE_SURVEY_T;
349
350typedef enum {
351 NORMAL_ACK = 0,
352 NO_ACK,
353} ACK_POLICY_T;
354
355typedef enum {
356 DONT_RESET = 0,
357 DO_RESET = 1,
358 NO_REQUEST = 2,
359} RESET_REQ_T;
360
361typedef enum {
362 REKEY_DISABLE = 1,
363 REKEY_TIME_BASE,
364 REKEY_PKT_BASE,
365 REKEY_TIME_PKT_BASE
366} RSNA_REKEY_POLICY_T;
367
368typedef enum {
369 FILTER_NO = 0x00,
370 FILTER_AP_ONLY = 0x01,
371 FILTER_STA_ONLY = 0x02
372} SCAN_CLASS_FITLER_T;
373
374typedef enum {
375 PRI_HIGH_RSSI = 0x00,
376 PRI_LOW_RSSI = 0x04,
377 PRI_DETECT = 0x08
378} SCAN_PRI_T;
379
380typedef enum {
381 CH_FILTER_OFF = 0x00,
382 CH_FILTER_ON = 0x10
383} CH_FILTER_T;
384
385typedef enum {
386 AUTO_PROT = 0, /* Auto */
387 NO_PROT, /* Do not use any protection */
388 ERP_PROT, /* Protect all ERP frame exchanges */
389 HT_PROT, /* Protect all HT frame exchanges */
390 GF_PROT, /* Protect all GF frame exchanges */
391} N_PROTECTION_MODE_T;
392
393typedef enum {
394 G_SELF_CTS_PROT,
395 G_RTS_CTS_PROT,
396} G_PROTECTION_MODE_T;
397
398typedef enum {
399 HT_MIXED_MODE = 1,
400 HT_ONLY_20MHZ_MODE,
401 HT_ONLY_20_40MHZ_MODE,
402} N_OPERATING_MODE_T;
403
404typedef enum {
405 NO_DETECT = 0,
406 DETECT_ONLY = 1,
407 DETECT_PROTECT = 2,
408 DETECT_PROTECT_REPORT = 3,
409} N_OBSS_DETECTION_T;
410
411typedef enum {
412 RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */
413 FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */
414 LSIG_TXOP_PROT, /* LSIG TXOP Protection */
415 FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */
416} N_PROTECTION_TYPE_T;
417
418typedef enum {
419 STATIC_MODE = 1,
420 DYNAMIC_MODE = 2,
421 MIMO_MODE = 3, /* power save disable */
422} N_SMPS_MODE_T;
423
424typedef enum {
425 DISABLE_SELF_CTS,
426 ENABLE_SELF_CTS,
427 DISABLE_TX_ABORT,
428 ENABLE_TX_ABORT,
429 HW_TRIGGER_ABORT,
430 SW_TRIGGER_ABORT,
431} TX_ABORT_OPTION_T;
432
433typedef enum {
434 WID_CHAR = 0,
435 WID_SHORT = 1,
436 WID_INT = 2,
437 WID_STR = 3,
438 WID_BIN_DATA = 4,
439 WID_BIN = 5,
440 WID_IP = 6,
441 WID_ADR = 7,
442 WID_UNDEF = 8,
443 WID_TYPE_FORCE_32BIT = 0xFFFFFFFF
444
445} WID_TYPE_T, tenuWIDtype;
446
447typedef enum {
448 WID_NIL = 0xffff,
449
450
451 /* BSS Type */
452 /* -------------------------------------------------------------- */
453 /* Configuration : Infrastructure Independent Access Point */
454 /* Values to set : 0 1 2 */
455 /* -------------------------------------------------------------- */
456 WID_BSS_TYPE = 0x0000,
457
458 /* Transmit Rate */
459 /* -------------------------------------------------------------- */
460 /* Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 */
461 /* Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 */
462 /* -------------------------------------------------------------- */
463 WID_CURRENT_TX_RATE = 0x0001,
464
465 /* Channel */
466 /* ------------------------------------------------------------------- */
467 /* Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */
468 /* Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */
469 /* -------------------------------------------------------------------- */
470 WID_CURRENT_CHANNEL = 0x0002,
471
472 /* Preamble */
473 /* -------------------------------------------------------------- */
474 /* Configuration : short long Auto */
475 /* Values to set : 0 1 2 */
476 /* -------------------------------------------------------------- */
477 WID_PREAMBLE = 0x0003,
478
479 /* 11g operating mode (ignored if 11g not present) */
480 /* -------------------------------------------------------------- */
481 /* Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) */
482 /* Values to set : 1 2 3 */
483 /* -------------------------------------------------------------- */
484 WID_11G_OPERATING_MODE = 0x0004,
485
486 /* Mac status (response only) */
487 /* -------------------------------------------------------------- */
488 /* Configuration : disconnect connect */
489 /* Values to get : 0 1 */
490 /* -------------------------------------------------------------- */
491 WID_STATUS = 0x0005,
492
493 /* Scan type */
494 /* -------------------------------------------------------------- */
495 /* Configuration : Passive Scanning Active Scanning */
496 /* Values to set : 0 1 */
497 /* -------------------------------------------------------------- */
498 WID_SCAN_TYPE = 0x0007,
499
500 /* Key Id (WEP default key Id) */
501 /* -------------------------------------------------------------- */
502 /* Configuration : Any value between 0 to 3 */
503 /* Values to set : Same value. Default is 0 */
504 /* -------------------------------------------------------------- */
505 WID_KEY_ID = 0x0009,
506
507 /* QoS Enable */
508 /* -------------------------------------------------------------- */
509 /* Configuration : QoS Disable WMM Enable */
510 /* Values to set : 0 1 */
511 /* -------------------------------------------------------------- */
512 WID_QOS_ENABLE = 0x000A,
513
514 /* Power Management */
515 /* ------------------------------------------------------------------ */
516 /* Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE */
517 /* Values to set : 0 1 2 */
518 /* ------------------------------------------------------------------ */
519 WID_POWER_MANAGEMENT = 0x000B,
520
521 /* WEP/802 11I Configuration */
522 /* ------------------------------------------------------------------ */
523 /* Configuration : Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP */
524 /* Values (0x) : 00 03 07 29 49 31 51 */
525 /* */
526 /* Configuration : WPA-AES+TKIP RSN-AES+TKIP */
527 /* Values (0x) : 69 71 */
528 /* ------------------------------------------------------------------ */
529 WID_11I_MODE = 0x000C,
530
531 /* WEP Configuration: Used in BSS STA mode only when WEP is enabled */
532 /* ------------------------------------------------------------------ */
533 /* Configuration : Open System Shared Key Any Type | 802.1x Auth */
534 /* Values (0x) : 01 02 03 | BIT2 */
535 /* ------------------------------------------------------------------ */
536 WID_AUTH_TYPE = 0x000D,
537
538 /* Site Survey Type */
539 /* -------------------------------------------------------------- */
540 /* Configuration : Values to set */
541 /* Survey 1 Channel : 0 */
542 /* survey all Channels : 1 */
543 /* Disable Site Survey : 2 */
544 /* -------------------------------------------------------------- */
545 WID_SITE_SURVEY = 0x000E,
546
547 /* Listen Interval */
548 /* -------------------------------------------------------------- */
549 /* Configuration : Any value between 1 to 255 */
550 /* Values to set : Same value. Default is 3 */
551 /* -------------------------------------------------------------- */
552 WID_LISTEN_INTERVAL = 0x000F,
553
554 /* DTIM Period */
555 /* -------------------------------------------------------------- */
556 /* Configuration : Any value between 1 to 255 */
557 /* Values to set : Same value. Default is 3 */
558 /* -------------------------------------------------------------- */
559 WID_DTIM_PERIOD = 0x0010,
560
561 /* ACK Policy */
562 /* -------------------------------------------------------------- */
563 /* Configuration : Normal Ack No Ack */
564 /* Values to set : 0 1 */
565 /* -------------------------------------------------------------- */
566 WID_ACK_POLICY = 0x0011,
567
568 /* Reset MAC (Set only) */
569 /* -------------------------------------------------------------- */
570 /* Configuration : Don't Reset Reset No Request */
571 /* Values to set : 0 1 2 */
572 /* -------------------------------------------------------------- */
573 WID_RESET = 0x0012,
574
575 /* Broadcast SSID Option: Setting this will adhere to "" SSID element */
576 /* ------------------------------------------------------------------ */
577 /* Configuration : Enable Disable */
578 /* Values to set : 1 0 */
579 /* ------------------------------------------------------------------ */
580 WID_BCAST_SSID = 0x0015,
581
582 /* Disconnect (Station) */
583 /* ------------------------------------------------------------------ */
584 /* Configuration : Association ID */
585 /* Values to set : Association ID */
586 /* ------------------------------------------------------------------ */
587 WID_DISCONNECT = 0x0016,
588
589 /* 11a Tx Power Level */
590 /* -------------------------------------------------------------------- */
591 /* Configuration : Sets TX Power (Higher the value greater the power) */
592 /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
593 /* -------------------------------------------------------------------- */
594 WID_TX_POWER_LEVEL_11A = 0x0018,
595
596 /* Group Key Update Policy Selection */
597 /* -------------------------------------------------------------------- */
598 /* Configuration : Disabled timeBased packetBased timePacketBased */
599 /* Values to set : 1 2 3 4 */
600 /* -------------------------------------------------------------------- */
601 WID_REKEY_POLICY = 0x0019,
602
603 /* Allow Short Slot */
604 /* -------------------------------------------------------------- */
605 /* Configuration : Disallow Short Slot Allow Short Slot */
606 /* (Enable Only Long Slot) (Enable Short Slot if applicable)*/
607 /* Values to set : 0 1 */
608 /* -------------------------------------------------------------- */
609 WID_SHORT_SLOT_ALLOWED = 0x001A,
610
611 WID_PHY_ACTIVE_REG = 0x001B,
612
613 /* 11b Tx Power Level */
614 /* -------------------------------------------------------------------- */
615 /* Configuration : Sets TX Power (Higher the value greater the power) */
616 /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
617 /* -------------------------------------------------------------------- */
618 WID_TX_POWER_LEVEL_11B = 0x001D,
619
620 /* Scan Request */
621 /* -------------------------------------------------------------------- */
622 /* Configuration : Request default scan */
623 /* Values to set : 0 */
624 /* -------------------------------------------------------------------- */
625 WID_START_SCAN_REQ = 0x001E,
626
627 /* Rssi (get only) */
628 /* -------------------------------------------------------------------- */
629 /* Configuration : */
630 /* Values to get : Rssi value */
631 /* -------------------------------------------------------------------- */
632 WID_RSSI = 0x001F,
633
634 /* Join Request */
635 /* -------------------------------------------------------------------- */
636 /* Configuration : Request to join */
637 /* Values to set : index of scan result */
638 /* -------------------------------------------------------------------- */
639 WID_JOIN_REQ = 0x0020,
640
641 WID_LINKSPEED = 0x0026,
642
643 /* Enable User Control of TX Power */
644 /* -------------------------------------------------------------------- */
645 /* Configuration : Disable Enable */
646 /* Values to set : 0 1 */
647 /* -------------------------------------------------------------------- */
648 WID_USER_CONTROL_ON_TX_POWER = 0x0027,
649
650 WID_MEMORY_ACCESS_8BIT = 0x0029,
651
652 /* Enable Auto RX Sensitivity feature */
653 /* -------------------------------------------------------------------- */
654 /* Configuration : Disable Enable */
655 /* Values to set : 0 1 */
656 /* -------------------------------------------------------------------- */
657 WID_AUTO_RX_SENSITIVITY = 0x0032,
658
659 /* Receive Buffer Based Ack */
660 /* -------------------------------------------------------------------- */
661 /* Configuration : Disable Enable */
662 /* Values to set : 0 1 */
663 /* -------------------------------------------------------------------- */
664 WID_DATAFLOW_CONTROL = 0x0033,
665
666 /* Scan Filter */
667 /* -------------------------------------------------------------------- */
668 /* Configuration : Class No filter AP only Station Only */
669 /* Values to set : 0 1 2 */
670 /* Configuration : Priority High Rssi Low Rssi Detect */
671 /* Values to set : 0 0x4 0x08 */
672 /* Configuration : Channel filter off filter on */
673 /* Values to set : 0 0x10 */
674 /* -------------------------------------------------------------------- */
675 WID_SCAN_FILTER = 0x0036,
676
677 /* Link Loss Threshold (measure in the beacon period) */
678 /* -------------------------------------------------------------------- */
679 /* Configuration : Any value between 10 and 254 (Set to 255 to disable it) */
680 /* Values to set : Same value. Default is 10 */
681 /* -------------------------------------------------------------------- */
682 WID_LINK_LOSS_THRESHOLD = 0x0037,
683
684 /*BugID_4978*/
685 WID_ABORT_RUNNING_SCAN = 0x003E,
686
687 /* NMAC Character WID list */
688 WID_WPS_START = 0x0043,
689
690 /* Protection mode for MAC */
691 /* -------------------------------------------------------------- */
692 /* Configuration : Auto No protection ERP HT GF */
693 /* Values to set : 0 1 2 3 4 */
694 /* -------------------------------------------------------------- */
695 WID_11N_PROT_MECH = 0x0080,
696
697 /* ERP Protection type for MAC */
698 /* -------------------------------------------------------------- */
699 /* Configuration : Self-CTS RTS-CTS */
700 /* Values to set : 0 1 */
701 /* -------------------------------------------------------------- */
702 WID_11N_ERP_PROT_TYPE = 0x0081,
703
704 /* HT Option Enable */
705 /* -------------------------------------------------------------- */
706 /* Configuration : HT Enable HT Disable */
707 /* Values to set : 1 0 */
708 /* -------------------------------------------------------------- */
709 WID_11N_ENABLE = 0x0082,
710
711 /* 11n Operating mode (Note that 11g operating mode will also be */
712 /* used in addition to this, if this is set to HT Mixed mode) */
713 /* -------------------------------------------------------------- */
714 /* Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz */
715 /* Values to set : 1 2 3 */
716 /* -------------------------------------------------------------- */
717 WID_11N_OPERATING_MODE = 0x0083,
718
719 /* 11n OBSS non-HT STA Detection flag */
720 /* -------------------------------------------------------------- */
721 /* Configuration : Do not detect */
722 /* Values to set : 0 */
723 /* Configuration : Detect, do not protect or report */
724 /* Values to set : 1 */
725 /* Configuration : Detect, protect and do not report */
726 /* Values to set : 2 */
727 /* Configuration : Detect, protect and report to other BSS */
728 /* Values to set : 3 */
729 /* -------------------------------------------------------------- */
730 WID_11N_OBSS_NONHT_DETECTION = 0x0084,
731
732 /* 11n HT Protection Type */
733 /* -------------------------------------------------------------- */
734 /* Configuration : RTS-CTS First Frame Exchange at non-HT-rate */
735 /* Values to set : 0 1 */
736 /* Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt */
737 /* Values to set : 2 3 */
738 /* -------------------------------------------------------------- */
739 WID_11N_HT_PROT_TYPE = 0x0085,
740
741 /* 11n RIFS Protection Enable Flag */
742 /* -------------------------------------------------------------- */
743 /* Configuration : Disable Enable */
744 /* Values to set : 0 1 */
745 /* -------------------------------------------------------------- */
746 WID_11N_RIFS_PROT_ENABLE = 0x0086,
747
748 /* SMPS Mode */
749 /* -------------------------------------------------------------- */
750 /* Configuration : Static Dynamic MIMO (Power Save Disabled) */
751 /* Values to set : 1 2 3 */
752 /* -------------------------------------------------------------- */
753 WID_11N_SMPS_MODE = 0x0087,
754
755 /* Current transmit MCS */
756 /* -------------------------------------------------------------- */
757 /* Configuration : MCS Index for data rate */
758 /* Values to set : 0 to 7 */
759 /* -------------------------------------------------------------- */
760 WID_11N_CURRENT_TX_MCS = 0x0088,
761
762 WID_11N_PRINT_STATS = 0x0089,
763
764 /* 11n Short GI Enable Flag */
765 /* -------------------------------------------------------------- */
766 /* Configuration : Disable Enable */
767 /* Values to set : 0 1 */
768 /* -------------------------------------------------------------- */
769 WID_11N_SHORT_GI_ENABLE = 0x008D,
770
771 /* 11n RIFS Enable Flag */
772 /* -------------------------------------------------------------- */
773 /* Configuration : Disable Enable */
774 /* Values to set : 0 1 */
775 /* -------------------------------------------------------------- */
776 WID_RIFS_MODE = 0x0094,
777
778 /* TX Abort Feature */
779 /* -------------------------------------------------------------- */
780 /* Configuration : Disable Self CTS Enable Self CTS */
781 /* Values to set : 0 1 */
782 /* Configuration : Disable TX Abort Enable TX Abort */
783 /* Values to set : 2 3 */
784 /* Configuration : Enable HW TX Abort Enable SW TX Abort */
785 /* Values to set : 4 5 */
786 /* -------------------------------------------------------------- */
787 WID_TX_ABORT_CONFIG = 0x00A1,
788
789 WID_REG_TSSI_11B_VALUE = 0x00A6,
790 WID_REG_TSSI_11G_VALUE = 0x00A7,
791 WID_REG_TSSI_11N_VALUE = 0x00A8,
792 WID_TX_CALIBRATION = 0x00A9,
793 WID_DSCR_TSSI_11B_VALUE = 0x00AA,
794 WID_DSCR_TSSI_11G_VALUE = 0x00AB,
795 WID_DSCR_TSSI_11N_VALUE = 0x00AC,
796
797 /* Immediate Block-Ack Support */
798 /* -------------------------------------------------------------- */
799 /* Configuration : Disable Enable */
800 /* Values to set : 0 1 */
801 /* -------------------------------------------------------------- */
802 WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF,
803
804 /* TXOP Disable Flag */
805 /* -------------------------------------------------------------- */
806 /* Configuration : Disable Enable */
807 /* Values to set : 1 0 */
808 /* -------------------------------------------------------------- */
809 WID_11N_TXOP_PROT_DISABLE = 0x00B0,
810
811
812 WID_TX_POWER_LEVEL_11N = 0x00B1,
813
814 /* Custom Character WID list */
815 WID_PC_TEST_MODE = 0x00C8,
816 /*bug3819: */
817 /* SCAN Complete notification WID*/
818 WID_SCAN_COMPLETE = 0x00C9,
819
820#ifdef WILC_AP_EXTERNAL_MLME
821 WID_DEL_BEACON = 0x00CA,
822#endif
823
824 WID_LOGTerminal_Switch = 0x00CD,
825 /* EMAC Short WID list */
826 /* RTS Threshold */
827 /* -------------------------------------------------------------- */
828 /* Configuration : Any value between 256 to 2347 */
829 /* Values to set : Same value. Default is 2347 */
830 /* -------------------------------------------------------------- */
831 WID_RTS_THRESHOLD = 0x1000,
832
833 /* Fragmentation Threshold */
834 /* -------------------------------------------------------------- */
835 /* Configuration : Any value between 256 to 2346 */
836 /* Values to set : Same value. Default is 2346 */
837 /* -------------------------------------------------------------- */
838 WID_FRAG_THRESHOLD = 0x1001,
839
840 WID_SHORT_RETRY_LIMIT = 0x1002,
841 WID_LONG_RETRY_LIMIT = 0x1003,
842 WID_BEACON_INTERVAL = 0x1006,
843 WID_MEMORY_ACCESS_16BIT = 0x1008,
844 WID_RX_SENSE = 0x100B,
845 WID_ACTIVE_SCAN_TIME = 0x100C,
846 WID_PASSIVE_SCAN_TIME = 0x100D,
847
848 WID_SITE_SURVEY_SCAN_TIME = 0x100E,
849 WID_JOIN_START_TIMEOUT = 0x100F,
850 WID_AUTH_TIMEOUT = 0x1010,
851 WID_ASOC_TIMEOUT = 0x1011,
852 WID_11I_PROTOCOL_TIMEOUT = 0x1012,
853 WID_EAPOL_RESPONSE_TIMEOUT = 0x1013,
854
855 /* NMAC Short WID list */
856 WID_11N_SIG_QUAL_VAL = 0x1085,
857 WID_CCA_THRESHOLD = 0x1087,
858
859 /* Custom Short WID list */
860
861 /* EMAC Integer WID list */
862 WID_FAILED_COUNT = 0x2000,
863 WID_RETRY_COUNT = 0x2001,
864 WID_MULTIPLE_RETRY_COUNT = 0x2002,
865 WID_FRAME_DUPLICATE_COUNT = 0x2003,
866 WID_ACK_FAILURE_COUNT = 0x2004,
867 WID_RECEIVED_FRAGMENT_COUNT = 0x2005,
868 WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006,
869 WID_FCS_ERROR_COUNT = 0x2007,
870 WID_SUCCESS_FRAME_COUNT = 0x2008,
871 WID_HUT_TX_COUNT = 0x200A,
872 WID_TX_FRAGMENT_COUNT = 0x200B,
873 WID_TX_MULTICAST_FRAME_COUNT = 0x200C,
874 WID_RTS_SUCCESS_COUNT = 0x200D,
875 WID_RTS_FAILURE_COUNT = 0x200E,
876 WID_WEP_UNDECRYPTABLE_COUNT = 0x200F,
877 WID_REKEY_PERIOD = 0x2010,
878 WID_REKEY_PACKET_COUNT = 0x2011,
879 WID_1X_SERV_ADDR = 0x2012,
880 WID_STACK_IP_ADDR = 0x2013,
881 WID_STACK_NETMASK_ADDR = 0x2014,
882 WID_HW_RX_COUNT = 0x2015,
883 WID_MEMORY_ADDRESS = 0x201E,
884 WID_MEMORY_ACCESS_32BIT = 0x201F,
885 WID_RF_REG_VAL = 0x2021,
886
887
888 /* NMAC Integer WID list */
889 WID_11N_PHY_ACTIVE_REG_VAL = 0x2080,
890
891 /* Custom Integer WID list */
892 WID_GET_INACTIVE_TIME = 0x2084,
893 WID_SET_DRV_HANDLER = 0X2085,
894 WID_SET_OPERATION_MODE = 0X2086,
895 /* EMAC String WID list */
896 WID_SSID = 0x3000,
897 WID_FIRMWARE_VERSION = 0x3001,
898 WID_OPERATIONAL_RATE_SET = 0x3002,
899 WID_BSSID = 0x3003,
900 WID_WEP_KEY_VALUE = 0x3004,
901 WID_11I_PSK = 0x3008,
902 WID_11E_P_ACTION_REQ = 0x3009,
903 WID_1X_KEY = 0x300A,
904 WID_HARDWARE_VERSION = 0x300B,
905 WID_MAC_ADDR = 0x300C,
906 WID_HUT_DEST_ADDR = 0x300D,
907 WID_PHY_VERSION = 0x300F,
908 WID_SUPP_USERNAME = 0x3010,
909 WID_SUPP_PASSWORD = 0x3011,
910 WID_SITE_SURVEY_RESULTS = 0x3012,
911 WID_RX_POWER_LEVEL = 0x3013,
912 WID_DEL_ALL_RX_BA = 0x3014,
913 WID_SET_STA_MAC_INACTIVE_TIME = 0x3017,
914 WID_ADD_WEP_KEY = 0x3019,
915 WID_REMOVE_WEP_KEY = 0x301A,
916 WID_ADD_PTK = 0x301B,
917 WID_ADD_RX_GTK = 0x301C,
918 WID_ADD_TX_GTK = 0x301D,
919 WID_REMOVE_KEY = 0x301E,
920 WID_ASSOC_REQ_INFO = 0x301F,
921 WID_ASSOC_RES_INFO = 0x3020,
922 WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */
923 WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */
924 WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */
925 WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */
926
927 /* NMAC String WID list */
928 WID_11N_P_ACTION_REQ = 0x3080,
929 WID_HUT_TEST_ID = 0x3081,
930 WID_PMKID_INFO = 0x3082,
931 WID_FIRMWARE_INFO = 0x3083,
932 #ifdef WILC_P2P
933 WID_REGISTER_FRAME = 0x3084,
934 #endif
935 WID_DEL_ALL_STA = 0x3085,
936 #ifdef WILC_P2P
937 WID_REMAIN_ON_CHAN = 0x3996,
938 #endif
939 /*BugID_4156*/
940 WID_SSID_PROBE_REQ = 0x3997,
941 /*BugID_4124 WID to trigger modified Join Request using SSID and BSSID instead of bssListIdx (used by WID_JOIN_REQ)*/
942 WID_JOIN_REQ_EXTENDED = 0x3998,
943
944 /* BugID 4951: WID toset IP address in firmware */
945 WID_IP_ADDRESS = 0x3999,
946
947
948
949 /* Custom String WID list */
950
951 /* EMAC Binary WID list */
952 WID_UAPSD_CONFIG = 0x4001,
953 WID_UAPSD_STATUS = 0x4002,
954 WID_WMM_AP_AC_PARAMS = 0x4003,
955 WID_WMM_STA_AC_PARAMS = 0x4004,
956 WID_NETWORK_INFO = 0x4005,
957 WID_STA_JOIN_INFO = 0x4006,
958 WID_CONNECTED_STA_LIST = 0x4007,
959
960 /* NMAC Binary WID list */
961 WID_11N_AUTORATE_TABLE = 0x4080,
962
963
964 /*Added here by Amr - BugID 4134*/
965 WID_SCAN_CHANNEL_LIST = 0x4084,
966
967 /*BugID_3746 WID to add IE to be added in next probe request*/
968 WID_INFO_ELEMENT_PROBE = 0x4085,
969 /*BugID_3746 WID to add IE to be added in next associate request*/
970 WID_INFO_ELEMENT_ASSOCIATE = 0x4086,
971 WID_ADD_STA = 0X4087,
972 WID_REMOVE_STA = 0X4088,
973 WID_EDIT_STA = 0X4089,
974 WID_ADD_BEACON = 0x408a,
975
976 /* BugID 5108 */
977 WID_SETUP_MULTICAST_FILTER = 0x408b,
978
979 /* Miscellaneous WIDs */
980 WID_ALL = 0x7FFE,
981 WID_MAX = 0xFFFF
982} WID_T;
983
984int wilc_wlan_init(wilc_wlan_inp_t *inp, wilc_wlan_oup_t *oup);
985
986void wilc_bus_set_max_speed(void);
987void wilc_bus_set_default_speed(void);
988uint32_t wilc_get_chipid(uint8_t update);
989
990
991#endif
Linux kernel - Deliverables
This page took 0.071401 seconds and 5 git commands to generate.