Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * decserial.c: Serial port driver for IOASIC DECstations. | |
3 | * | |
4 | * Derived from drivers/sbus/char/sunserial.c by Paul Mackerras. | |
5 | * Derived from drivers/macintosh/macserial.c by Harald Koerfgen. | |
6 | * | |
7 | * DECstation changes | |
8 | * Copyright (C) 1998-2000 Harald Koerfgen | |
0905780a | 9 | * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005 Maciej W. Rozycki |
1da177e4 LT |
10 | * |
11 | * For the rest of the code the original Copyright applies: | |
12 | * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) | |
13 | * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) | |
14 | * | |
15 | * | |
16 | * Note: for IOASIC systems the wiring is as follows: | |
17 | * | |
18 | * mouse/keyboard: | |
19 | * DIN-7 MJ-4 signal SCC | |
20 | * 2 1 TxD <- A.TxD | |
21 | * 3 4 RxD -> A.RxD | |
22 | * | |
23 | * EIA-232/EIA-423: | |
24 | * DB-25 MMJ-6 signal SCC | |
25 | * 2 2 TxD <- B.TxD | |
26 | * 3 5 RxD -> B.RxD | |
27 | * 4 RTS <- ~A.RTS | |
28 | * 5 CTS -> ~B.CTS | |
29 | * 6 6 DSR -> ~A.SYNC | |
30 | * 8 CD -> ~B.DCD | |
31 | * 12 DSRS(DCE) -> ~A.CTS (*) | |
32 | * 15 TxC -> B.TxC | |
33 | * 17 RxC -> B.RxC | |
34 | * 20 1 DTR <- ~A.DTR | |
35 | * 22 RI -> ~A.DCD | |
36 | * 23 DSRS(DTE) <- ~B.RTS | |
37 | * | |
38 | * (*) EIA-232 defines the signal at this pin to be SCD, while DSRS(DCE) | |
39 | * is shared with DSRS(DTE) at pin 23. | |
40 | */ | |
41 | ||
1da177e4 LT |
42 | #include <linux/errno.h> |
43 | #include <linux/signal.h> | |
44 | #include <linux/sched.h> | |
45 | #include <linux/timer.h> | |
46 | #include <linux/interrupt.h> | |
47 | #include <linux/tty.h> | |
48 | #include <linux/tty_flip.h> | |
49 | #include <linux/major.h> | |
50 | #include <linux/string.h> | |
51 | #include <linux/fcntl.h> | |
52 | #include <linux/mm.h> | |
53 | #include <linux/kernel.h> | |
54 | #include <linux/delay.h> | |
55 | #include <linux/init.h> | |
56 | #include <linux/ioport.h> | |
0905780a | 57 | #include <linux/spinlock.h> |
1da177e4 LT |
58 | #ifdef CONFIG_SERIAL_DEC_CONSOLE |
59 | #include <linux/console.h> | |
60 | #endif | |
61 | ||
62 | #include <asm/io.h> | |
63 | #include <asm/pgtable.h> | |
64 | #include <asm/irq.h> | |
65 | #include <asm/system.h> | |
1da177e4 | 66 | #include <asm/bootinfo.h> |
1da177e4 | 67 | |
1da177e4 | 68 | #include <asm/dec/interrupts.h> |
a5fc9c0b | 69 | #include <asm/dec/ioasic_addrs.h> |
1da177e4 | 70 | #include <asm/dec/machtype.h> |
a5fc9c0b MR |
71 | #include <asm/dec/serial.h> |
72 | #include <asm/dec/system.h> | |
1da177e4 | 73 | #include <asm/dec/tc.h> |
a5fc9c0b | 74 | |
1da177e4 LT |
75 | #ifdef CONFIG_KGDB |
76 | #include <asm/kgdb.h> | |
77 | #endif | |
78 | #ifdef CONFIG_MAGIC_SYSRQ | |
79 | #include <linux/sysrq.h> | |
80 | #endif | |
81 | ||
82 | #include "zs.h" | |
83 | ||
84 | /* | |
85 | * It would be nice to dynamically allocate everything that | |
86 | * depends on NUM_SERIAL, so we could support any number of | |
87 | * Z8530s, but for now... | |
88 | */ | |
89 | #define NUM_SERIAL 2 /* Max number of ZS chips supported */ | |
90 | #define NUM_CHANNELS (NUM_SERIAL * 2) /* 2 channels per chip */ | |
91 | #define CHANNEL_A_NR (zs_parms->channel_a_offset > zs_parms->channel_b_offset) | |
92 | /* Number of channel A in the chip */ | |
93 | #define ZS_CHAN_IO_SIZE 8 | |
94 | #define ZS_CLOCK 7372800 /* Z8530 RTxC input clock rate */ | |
95 | ||
96 | #define RECOVERY_DELAY udelay(2) | |
97 | ||
98 | struct zs_parms { | |
99 | unsigned long scc0; | |
100 | unsigned long scc1; | |
101 | int channel_a_offset; | |
102 | int channel_b_offset; | |
103 | int irq0; | |
104 | int irq1; | |
105 | int clock; | |
106 | }; | |
107 | ||
108 | static struct zs_parms *zs_parms; | |
109 | ||
110 | #ifdef CONFIG_MACH_DECSTATION | |
111 | static struct zs_parms ds_parms = { | |
112 | scc0 : IOASIC_SCC0, | |
113 | scc1 : IOASIC_SCC1, | |
114 | channel_a_offset : 1, | |
115 | channel_b_offset : 9, | |
116 | irq0 : -1, | |
117 | irq1 : -1, | |
118 | clock : ZS_CLOCK | |
119 | }; | |
120 | #endif | |
121 | ||
122 | #ifdef CONFIG_MACH_DECSTATION | |
123 | #define DS_BUS_PRESENT (IOASIC) | |
124 | #else | |
125 | #define DS_BUS_PRESENT 0 | |
126 | #endif | |
127 | ||
128 | #define BUS_PRESENT (DS_BUS_PRESENT) | |
129 | ||
0905780a MR |
130 | DEFINE_SPINLOCK(zs_lock); |
131 | ||
1da177e4 LT |
132 | struct dec_zschannel zs_channels[NUM_CHANNELS]; |
133 | struct dec_serial zs_soft[NUM_CHANNELS]; | |
134 | int zs_channels_found; | |
135 | struct dec_serial *zs_chain; /* list of all channels */ | |
136 | ||
137 | struct tty_struct zs_ttys[NUM_CHANNELS]; | |
138 | ||
139 | #ifdef CONFIG_SERIAL_DEC_CONSOLE | |
140 | static struct console sercons; | |
141 | #endif | |
142 | #if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ | |
143 | !defined(MODULE) | |
144 | static unsigned long break_pressed; /* break, really ... */ | |
145 | #endif | |
146 | ||
147 | static unsigned char zs_init_regs[16] __initdata = { | |
148 | 0, /* write 0 */ | |
149 | 0, /* write 1 */ | |
150 | 0, /* write 2 */ | |
151 | 0, /* write 3 */ | |
152 | (X16CLK), /* write 4 */ | |
153 | 0, /* write 5 */ | |
154 | 0, 0, 0, /* write 6, 7, 8 */ | |
155 | (MIE | DLC | NV), /* write 9 */ | |
156 | (NRZ), /* write 10 */ | |
157 | (TCBR | RCBR), /* write 11 */ | |
158 | 0, 0, /* BRG time constant, write 12 + 13 */ | |
159 | (BRSRC | BRENABL), /* write 14 */ | |
160 | 0 /* write 15 */ | |
161 | }; | |
162 | ||
1da177e4 LT |
163 | static struct tty_driver *serial_driver; |
164 | ||
165 | /* serial subtype definitions */ | |
166 | #define SERIAL_TYPE_NORMAL 1 | |
167 | ||
168 | /* number of characters left in xmit buffer before we ask for more */ | |
169 | #define WAKEUP_CHARS 256 | |
170 | ||
171 | /* | |
172 | * Debugging. | |
173 | */ | |
174 | #undef SERIAL_DEBUG_OPEN | |
175 | #undef SERIAL_DEBUG_FLOW | |
176 | #undef SERIAL_DEBUG_THROTTLE | |
177 | #undef SERIAL_PARANOIA_CHECK | |
178 | ||
179 | #undef ZS_DEBUG_REGS | |
180 | ||
181 | #ifdef SERIAL_DEBUG_THROTTLE | |
182 | #define _tty_name(tty,buf) tty_name(tty,buf) | |
183 | #endif | |
184 | ||
185 | #define RS_STROBE_TIME 10 | |
186 | #define RS_ISR_PASS_LIMIT 256 | |
187 | ||
1da177e4 LT |
188 | static void probe_sccs(void); |
189 | static void change_speed(struct dec_serial *info); | |
190 | static void rs_wait_until_sent(struct tty_struct *tty, int timeout); | |
191 | ||
1da177e4 LT |
192 | static inline int serial_paranoia_check(struct dec_serial *info, |
193 | char *name, const char *routine) | |
194 | { | |
195 | #ifdef SERIAL_PARANOIA_CHECK | |
196 | static const char *badmagic = | |
197 | "Warning: bad magic number for serial struct %s in %s\n"; | |
198 | static const char *badinfo = | |
199 | "Warning: null mac_serial for %s in %s\n"; | |
200 | ||
201 | if (!info) { | |
202 | printk(badinfo, name, routine); | |
203 | return 1; | |
204 | } | |
205 | if (info->magic != SERIAL_MAGIC) { | |
206 | printk(badmagic, name, routine); | |
207 | return 1; | |
208 | } | |
209 | #endif | |
210 | return 0; | |
211 | } | |
212 | ||
213 | /* | |
214 | * This is used to figure out the divisor speeds and the timeouts | |
215 | */ | |
216 | static int baud_table[] = { | |
217 | 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, | |
218 | 9600, 19200, 38400, 57600, 115200, 0 }; | |
219 | ||
220 | /* | |
221 | * Reading and writing Z8530 registers. | |
222 | */ | |
223 | static inline unsigned char read_zsreg(struct dec_zschannel *channel, | |
224 | unsigned char reg) | |
225 | { | |
226 | unsigned char retval; | |
227 | ||
228 | if (reg != 0) { | |
229 | *channel->control = reg & 0xf; | |
230 | fast_iob(); RECOVERY_DELAY; | |
231 | } | |
232 | retval = *channel->control; | |
233 | RECOVERY_DELAY; | |
234 | return retval; | |
235 | } | |
236 | ||
237 | static inline void write_zsreg(struct dec_zschannel *channel, | |
238 | unsigned char reg, unsigned char value) | |
239 | { | |
240 | if (reg != 0) { | |
241 | *channel->control = reg & 0xf; | |
242 | fast_iob(); RECOVERY_DELAY; | |
243 | } | |
244 | *channel->control = value; | |
245 | fast_iob(); RECOVERY_DELAY; | |
246 | return; | |
247 | } | |
248 | ||
249 | static inline unsigned char read_zsdata(struct dec_zschannel *channel) | |
250 | { | |
251 | unsigned char retval; | |
252 | ||
253 | retval = *channel->data; | |
254 | RECOVERY_DELAY; | |
255 | return retval; | |
256 | } | |
257 | ||
258 | static inline void write_zsdata(struct dec_zschannel *channel, | |
259 | unsigned char value) | |
260 | { | |
261 | *channel->data = value; | |
262 | fast_iob(); RECOVERY_DELAY; | |
263 | return; | |
264 | } | |
265 | ||
266 | static inline void load_zsregs(struct dec_zschannel *channel, | |
267 | unsigned char *regs) | |
268 | { | |
269 | /* ZS_CLEARERR(channel); | |
270 | ZS_CLEARFIFO(channel); */ | |
271 | /* Load 'em up */ | |
272 | write_zsreg(channel, R3, regs[R3] & ~RxENABLE); | |
273 | write_zsreg(channel, R5, regs[R5] & ~TxENAB); | |
274 | write_zsreg(channel, R4, regs[R4]); | |
275 | write_zsreg(channel, R9, regs[R9]); | |
276 | write_zsreg(channel, R1, regs[R1]); | |
277 | write_zsreg(channel, R2, regs[R2]); | |
278 | write_zsreg(channel, R10, regs[R10]); | |
279 | write_zsreg(channel, R11, regs[R11]); | |
280 | write_zsreg(channel, R12, regs[R12]); | |
281 | write_zsreg(channel, R13, regs[R13]); | |
282 | write_zsreg(channel, R14, regs[R14]); | |
283 | write_zsreg(channel, R15, regs[R15]); | |
284 | write_zsreg(channel, R3, regs[R3]); | |
285 | write_zsreg(channel, R5, regs[R5]); | |
286 | return; | |
287 | } | |
288 | ||
289 | /* Sets or clears DTR/RTS on the requested line */ | |
290 | static inline void zs_rtsdtr(struct dec_serial *info, int which, int set) | |
291 | { | |
292 | unsigned long flags; | |
293 | ||
0905780a | 294 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 LT |
295 | if (info->zs_channel != info->zs_chan_a) { |
296 | if (set) { | |
297 | info->zs_chan_a->curregs[5] |= (which & (RTS | DTR)); | |
298 | } else { | |
299 | info->zs_chan_a->curregs[5] &= ~(which & (RTS | DTR)); | |
300 | } | |
301 | write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]); | |
302 | } | |
0905780a | 303 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
304 | } |
305 | ||
306 | /* Utility routines for the Zilog */ | |
307 | static inline int get_zsbaud(struct dec_serial *ss) | |
308 | { | |
309 | struct dec_zschannel *channel = ss->zs_channel; | |
310 | int brg; | |
311 | ||
312 | /* The baud rate is split up between two 8-bit registers in | |
313 | * what is termed 'BRG time constant' format in my docs for | |
314 | * the chip, it is a function of the clk rate the chip is | |
315 | * receiving which happens to be constant. | |
316 | */ | |
317 | brg = (read_zsreg(channel, 13) << 8); | |
318 | brg |= read_zsreg(channel, 12); | |
319 | return BRG_TO_BPS(brg, (zs_parms->clock/(ss->clk_divisor))); | |
320 | } | |
321 | ||
322 | /* On receive, this clears errors and the receiver interrupts */ | |
323 | static inline void rs_recv_clear(struct dec_zschannel *zsc) | |
324 | { | |
325 | write_zsreg(zsc, 0, ERR_RES); | |
326 | write_zsreg(zsc, 0, RES_H_IUS); /* XXX this is unnecessary */ | |
327 | } | |
328 | ||
329 | /* | |
330 | * ---------------------------------------------------------------------- | |
331 | * | |
332 | * Here starts the interrupt handling routines. All of the following | |
333 | * subroutines are declared as inline and are folded into | |
334 | * rs_interrupt(). They were separated out for readability's sake. | |
335 | * | |
336 | * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 | |
337 | * ----------------------------------------------------------------------- | |
338 | */ | |
339 | ||
340 | /* | |
341 | * This routine is used by the interrupt handler to schedule | |
342 | * processing in the software interrupt portion of the driver. | |
343 | */ | |
41c28ff1 | 344 | static void rs_sched_event(struct dec_serial *info, int event) |
1da177e4 LT |
345 | { |
346 | info->event |= 1 << event; | |
0905780a | 347 | tasklet_schedule(&info->tlet); |
1da177e4 LT |
348 | } |
349 | ||
7d12e780 | 350 | static void receive_chars(struct dec_serial *info) |
1da177e4 LT |
351 | { |
352 | struct tty_struct *tty = info->tty; | |
353 | unsigned char ch, stat, flag; | |
354 | ||
355 | while ((read_zsreg(info->zs_channel, R0) & Rx_CH_AV) != 0) { | |
356 | ||
357 | stat = read_zsreg(info->zs_channel, R1); | |
358 | ch = read_zsdata(info->zs_channel); | |
359 | ||
360 | if (!tty && (!info->hook || !info->hook->rx_char)) | |
361 | continue; | |
362 | ||
363 | flag = TTY_NORMAL; | |
364 | if (info->tty_break) { | |
365 | info->tty_break = 0; | |
366 | flag = TTY_BREAK; | |
367 | if (info->flags & ZILOG_SAK) | |
368 | do_SAK(tty); | |
369 | /* Ignore the null char got when BREAK is removed. */ | |
370 | if (ch == 0) | |
371 | continue; | |
372 | } else { | |
373 | if (stat & Rx_OVR) { | |
374 | flag = TTY_OVERRUN; | |
375 | } else if (stat & FRM_ERR) { | |
376 | flag = TTY_FRAME; | |
377 | } else if (stat & PAR_ERR) { | |
378 | flag = TTY_PARITY; | |
379 | } | |
380 | if (flag != TTY_NORMAL) | |
381 | /* reset the error indication */ | |
382 | write_zsreg(info->zs_channel, R0, ERR_RES); | |
383 | } | |
384 | ||
385 | #if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ | |
386 | !defined(MODULE) | |
387 | if (break_pressed && info->line == sercons.index) { | |
388 | /* Ignore the null char got when BREAK is removed. */ | |
389 | if (ch == 0) | |
390 | continue; | |
391 | if (time_before(jiffies, break_pressed + HZ * 5)) { | |
f1d08f71 | 392 | handle_sysrq(ch, NULL); |
1da177e4 LT |
393 | break_pressed = 0; |
394 | continue; | |
395 | } | |
396 | break_pressed = 0; | |
397 | } | |
398 | #endif | |
399 | ||
400 | if (info->hook && info->hook->rx_char) { | |
401 | (*info->hook->rx_char)(ch, flag); | |
402 | return; | |
403 | } | |
404 | ||
405 | tty_insert_flip_char(tty, ch, flag); | |
406 | } | |
407 | if (tty) | |
408 | tty_flip_buffer_push(tty); | |
409 | } | |
410 | ||
411 | static void transmit_chars(struct dec_serial *info) | |
412 | { | |
413 | if ((read_zsreg(info->zs_channel, R0) & Tx_BUF_EMP) == 0) | |
414 | return; | |
415 | info->tx_active = 0; | |
416 | ||
417 | if (info->x_char) { | |
418 | /* Send next char */ | |
419 | write_zsdata(info->zs_channel, info->x_char); | |
420 | info->x_char = 0; | |
421 | info->tx_active = 1; | |
422 | return; | |
423 | } | |
424 | ||
425 | if ((info->xmit_cnt <= 0) || (info->tty && info->tty->stopped) | |
426 | || info->tx_stopped) { | |
427 | write_zsreg(info->zs_channel, R0, RES_Tx_P); | |
428 | return; | |
429 | } | |
430 | /* Send char */ | |
431 | write_zsdata(info->zs_channel, info->xmit_buf[info->xmit_tail++]); | |
432 | info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); | |
433 | info->xmit_cnt--; | |
434 | info->tx_active = 1; | |
435 | ||
436 | if (info->xmit_cnt < WAKEUP_CHARS) | |
437 | rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); | |
438 | } | |
439 | ||
41c28ff1 | 440 | static void status_handle(struct dec_serial *info) |
1da177e4 LT |
441 | { |
442 | unsigned char stat; | |
443 | ||
444 | /* Get status from Read Register 0 */ | |
445 | stat = read_zsreg(info->zs_channel, R0); | |
446 | ||
447 | if ((stat & BRK_ABRT) && !(info->read_reg_zero & BRK_ABRT)) { | |
448 | #if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ | |
449 | !defined(MODULE) | |
450 | if (info->line == sercons.index) { | |
451 | if (!break_pressed) | |
452 | break_pressed = jiffies; | |
453 | } else | |
454 | #endif | |
455 | info->tty_break = 1; | |
456 | } | |
457 | ||
458 | if (info->zs_channel != info->zs_chan_a) { | |
459 | ||
460 | /* Check for DCD transitions */ | |
461 | if (info->tty && !C_CLOCAL(info->tty) && | |
462 | ((stat ^ info->read_reg_zero) & DCD) != 0 ) { | |
463 | if (stat & DCD) { | |
464 | wake_up_interruptible(&info->open_wait); | |
465 | } else { | |
466 | tty_hangup(info->tty); | |
467 | } | |
468 | } | |
469 | ||
470 | /* Check for CTS transitions */ | |
471 | if (info->tty && C_CRTSCTS(info->tty)) { | |
472 | if ((stat & CTS) != 0) { | |
473 | if (info->tx_stopped) { | |
474 | info->tx_stopped = 0; | |
475 | if (!info->tx_active) | |
476 | transmit_chars(info); | |
477 | } | |
478 | } else { | |
479 | info->tx_stopped = 1; | |
480 | } | |
481 | } | |
482 | ||
483 | } | |
484 | ||
485 | /* Clear status condition... */ | |
486 | write_zsreg(info->zs_channel, R0, RES_EXT_INT); | |
487 | info->read_reg_zero = stat; | |
488 | } | |
489 | ||
490 | /* | |
491 | * This is the serial driver's generic interrupt routine | |
492 | */ | |
7d12e780 | 493 | static irqreturn_t rs_interrupt(int irq, void *dev_id) |
1da177e4 LT |
494 | { |
495 | struct dec_serial *info = (struct dec_serial *) dev_id; | |
0905780a | 496 | irqreturn_t status = IRQ_NONE; |
1da177e4 LT |
497 | unsigned char zs_intreg; |
498 | int shift; | |
499 | ||
500 | /* NOTE: The read register 3, which holds the irq status, | |
501 | * does so for both channels on each chip. Although | |
502 | * the status value itself must be read from the A | |
503 | * channel and is only valid when read from channel A. | |
504 | * Yes... broken hardware... | |
505 | */ | |
506 | #define CHAN_IRQMASK (CHBRxIP | CHBTxIP | CHBEXT) | |
507 | ||
508 | if (info->zs_chan_a == info->zs_channel) | |
509 | shift = 3; /* Channel A */ | |
510 | else | |
511 | shift = 0; /* Channel B */ | |
512 | ||
513 | for (;;) { | |
514 | zs_intreg = read_zsreg(info->zs_chan_a, R3) >> shift; | |
515 | if ((zs_intreg & CHAN_IRQMASK) == 0) | |
516 | break; | |
517 | ||
0905780a MR |
518 | status = IRQ_HANDLED; |
519 | ||
1da177e4 | 520 | if (zs_intreg & CHBRxIP) { |
7d12e780 | 521 | receive_chars(info); |
1da177e4 LT |
522 | } |
523 | if (zs_intreg & CHBTxIP) { | |
524 | transmit_chars(info); | |
525 | } | |
526 | if (zs_intreg & CHBEXT) { | |
527 | status_handle(info); | |
528 | } | |
529 | } | |
530 | ||
531 | /* Why do we need this ? */ | |
532 | write_zsreg(info->zs_channel, 0, RES_H_IUS); | |
0905780a MR |
533 | |
534 | return status; | |
1da177e4 LT |
535 | } |
536 | ||
537 | #ifdef ZS_DEBUG_REGS | |
538 | void zs_dump (void) { | |
539 | int i, j; | |
540 | for (i = 0; i < zs_channels_found; i++) { | |
541 | struct dec_zschannel *ch = &zs_channels[i]; | |
542 | if ((long)ch->control == UNI_IO_BASE+UNI_SCC1A_CTRL) { | |
543 | for (j = 0; j < 15; j++) { | |
544 | printk("W%d = 0x%x\t", | |
545 | j, (int)ch->curregs[j]); | |
546 | } | |
547 | for (j = 0; j < 15; j++) { | |
548 | printk("R%d = 0x%x\t", | |
549 | j, (int)read_zsreg(ch,j)); | |
550 | } | |
551 | printk("\n\n"); | |
552 | } | |
553 | } | |
554 | } | |
555 | #endif | |
556 | ||
557 | /* | |
558 | * ------------------------------------------------------------------- | |
559 | * Here ends the serial interrupt routines. | |
560 | * ------------------------------------------------------------------- | |
561 | */ | |
562 | ||
563 | /* | |
564 | * ------------------------------------------------------------ | |
565 | * rs_stop() and rs_start() | |
566 | * | |
567 | * This routines are called before setting or resetting tty->stopped. | |
568 | * ------------------------------------------------------------ | |
569 | */ | |
570 | static void rs_stop(struct tty_struct *tty) | |
571 | { | |
572 | struct dec_serial *info = (struct dec_serial *)tty->driver_data; | |
573 | unsigned long flags; | |
574 | ||
575 | if (serial_paranoia_check(info, tty->name, "rs_stop")) | |
576 | return; | |
577 | ||
578 | #if 1 | |
0905780a | 579 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 LT |
580 | if (info->zs_channel->curregs[5] & TxENAB) { |
581 | info->zs_channel->curregs[5] &= ~TxENAB; | |
582 | write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]); | |
583 | } | |
0905780a | 584 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
585 | #endif |
586 | } | |
587 | ||
588 | static void rs_start(struct tty_struct *tty) | |
589 | { | |
590 | struct dec_serial *info = (struct dec_serial *)tty->driver_data; | |
591 | unsigned long flags; | |
592 | ||
593 | if (serial_paranoia_check(info, tty->name, "rs_start")) | |
594 | return; | |
595 | ||
0905780a | 596 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 LT |
597 | #if 1 |
598 | if (info->xmit_cnt && info->xmit_buf && !(info->zs_channel->curregs[5] & TxENAB)) { | |
599 | info->zs_channel->curregs[5] |= TxENAB; | |
600 | write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]); | |
601 | } | |
602 | #else | |
603 | if (info->xmit_cnt && info->xmit_buf && !info->tx_active) { | |
604 | transmit_chars(info); | |
605 | } | |
606 | #endif | |
0905780a | 607 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
608 | } |
609 | ||
610 | /* | |
611 | * This routine is used to handle the "bottom half" processing for the | |
612 | * serial driver, known also the "software interrupt" processing. | |
613 | * This processing is done at the kernel interrupt level, after the | |
614 | * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This | |
615 | * is where time-consuming activities which can not be done in the | |
616 | * interrupt driver proper are done; the interrupt driver schedules | |
617 | * them using rs_sched_event(), and they get done here. | |
618 | */ | |
1da177e4 | 619 | |
0905780a | 620 | static void do_softint(unsigned long private_) |
1da177e4 LT |
621 | { |
622 | struct dec_serial *info = (struct dec_serial *) private_; | |
623 | struct tty_struct *tty; | |
624 | ||
625 | tty = info->tty; | |
626 | if (!tty) | |
627 | return; | |
628 | ||
b963a844 | 629 | if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) |
1da177e4 | 630 | tty_wakeup(tty); |
1da177e4 LT |
631 | } |
632 | ||
0905780a | 633 | static int zs_startup(struct dec_serial * info) |
1da177e4 LT |
634 | { |
635 | unsigned long flags; | |
636 | ||
637 | if (info->flags & ZILOG_INITIALIZED) | |
638 | return 0; | |
639 | ||
640 | if (!info->xmit_buf) { | |
641 | info->xmit_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL); | |
642 | if (!info->xmit_buf) | |
643 | return -ENOMEM; | |
644 | } | |
645 | ||
0905780a | 646 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 LT |
647 | |
648 | #ifdef SERIAL_DEBUG_OPEN | |
649 | printk("starting up ttyS%d (irq %d)...", info->line, info->irq); | |
650 | #endif | |
651 | ||
652 | /* | |
653 | * Clear the receive FIFO. | |
654 | */ | |
655 | ZS_CLEARFIFO(info->zs_channel); | |
656 | info->xmit_fifo_size = 1; | |
657 | ||
658 | /* | |
659 | * Clear the interrupt registers. | |
660 | */ | |
661 | write_zsreg(info->zs_channel, R0, ERR_RES); | |
662 | write_zsreg(info->zs_channel, R0, RES_H_IUS); | |
663 | ||
664 | /* | |
665 | * Set the speed of the serial port | |
666 | */ | |
667 | change_speed(info); | |
668 | ||
669 | /* | |
670 | * Turn on RTS and DTR. | |
671 | */ | |
672 | zs_rtsdtr(info, RTS | DTR, 1); | |
673 | ||
674 | /* | |
675 | * Finally, enable sequencing and interrupts | |
676 | */ | |
677 | info->zs_channel->curregs[R1] &= ~RxINT_MASK; | |
678 | info->zs_channel->curregs[R1] |= (RxINT_ALL | TxINT_ENAB | | |
679 | EXT_INT_ENAB); | |
680 | info->zs_channel->curregs[R3] |= RxENABLE; | |
681 | info->zs_channel->curregs[R5] |= TxENAB; | |
682 | info->zs_channel->curregs[R15] |= (DCDIE | CTSIE | TxUIE | BRKIE); | |
683 | write_zsreg(info->zs_channel, R1, info->zs_channel->curregs[R1]); | |
684 | write_zsreg(info->zs_channel, R3, info->zs_channel->curregs[R3]); | |
685 | write_zsreg(info->zs_channel, R5, info->zs_channel->curregs[R5]); | |
686 | write_zsreg(info->zs_channel, R15, info->zs_channel->curregs[R15]); | |
687 | ||
688 | /* | |
689 | * And clear the interrupt registers again for luck. | |
690 | */ | |
691 | write_zsreg(info->zs_channel, R0, ERR_RES); | |
692 | write_zsreg(info->zs_channel, R0, RES_H_IUS); | |
693 | ||
694 | /* Save the current value of RR0 */ | |
695 | info->read_reg_zero = read_zsreg(info->zs_channel, R0); | |
696 | ||
697 | if (info->tty) | |
698 | clear_bit(TTY_IO_ERROR, &info->tty->flags); | |
699 | info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; | |
700 | ||
701 | info->flags |= ZILOG_INITIALIZED; | |
0905780a | 702 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
703 | return 0; |
704 | } | |
705 | ||
706 | /* | |
707 | * This routine will shutdown a serial port; interrupts are disabled, and | |
708 | * DTR is dropped if the hangup on close termio flag is on. | |
709 | */ | |
710 | static void shutdown(struct dec_serial * info) | |
711 | { | |
712 | unsigned long flags; | |
713 | ||
714 | if (!(info->flags & ZILOG_INITIALIZED)) | |
715 | return; | |
716 | ||
717 | #ifdef SERIAL_DEBUG_OPEN | |
718 | printk("Shutting down serial port %d (irq %d)....", info->line, | |
719 | info->irq); | |
720 | #endif | |
721 | ||
0905780a | 722 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 LT |
723 | |
724 | if (info->xmit_buf) { | |
725 | free_page((unsigned long) info->xmit_buf); | |
726 | info->xmit_buf = 0; | |
727 | } | |
728 | ||
729 | info->zs_channel->curregs[1] = 0; | |
730 | write_zsreg(info->zs_channel, 1, info->zs_channel->curregs[1]); /* no interrupts */ | |
731 | ||
732 | info->zs_channel->curregs[3] &= ~RxENABLE; | |
733 | write_zsreg(info->zs_channel, 3, info->zs_channel->curregs[3]); | |
734 | ||
735 | info->zs_channel->curregs[5] &= ~TxENAB; | |
736 | write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]); | |
737 | if (!info->tty || C_HUPCL(info->tty)) { | |
738 | zs_rtsdtr(info, RTS | DTR, 0); | |
739 | } | |
740 | ||
741 | if (info->tty) | |
742 | set_bit(TTY_IO_ERROR, &info->tty->flags); | |
743 | ||
744 | info->flags &= ~ZILOG_INITIALIZED; | |
0905780a | 745 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
746 | } |
747 | ||
748 | /* | |
749 | * This routine is called to set the UART divisor registers to match | |
750 | * the specified baud rate for a serial port. | |
751 | */ | |
752 | static void change_speed(struct dec_serial *info) | |
753 | { | |
754 | unsigned cflag; | |
755 | int i; | |
756 | int brg, bits; | |
757 | unsigned long flags; | |
758 | ||
759 | if (!info->hook) { | |
760 | if (!info->tty || !info->tty->termios) | |
761 | return; | |
762 | cflag = info->tty->termios->c_cflag; | |
763 | if (!info->port) | |
764 | return; | |
765 | } else { | |
766 | cflag = info->hook->cflags; | |
767 | } | |
768 | ||
769 | i = cflag & CBAUD; | |
770 | if (i & CBAUDEX) { | |
771 | i &= ~CBAUDEX; | |
772 | if (i < 1 || i > 2) { | |
773 | if (!info->hook) | |
774 | info->tty->termios->c_cflag &= ~CBAUDEX; | |
775 | else | |
776 | info->hook->cflags &= ~CBAUDEX; | |
777 | } else | |
778 | i += 15; | |
779 | } | |
780 | ||
0905780a | 781 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 LT |
782 | info->zs_baud = baud_table[i]; |
783 | if (info->zs_baud) { | |
784 | brg = BPS_TO_BRG(info->zs_baud, zs_parms->clock/info->clk_divisor); | |
785 | info->zs_channel->curregs[12] = (brg & 255); | |
786 | info->zs_channel->curregs[13] = ((brg >> 8) & 255); | |
787 | zs_rtsdtr(info, DTR, 1); | |
788 | } else { | |
789 | zs_rtsdtr(info, RTS | DTR, 0); | |
790 | return; | |
791 | } | |
792 | ||
793 | /* byte size and parity */ | |
794 | info->zs_channel->curregs[3] &= ~RxNBITS_MASK; | |
795 | info->zs_channel->curregs[5] &= ~TxNBITS_MASK; | |
796 | switch (cflag & CSIZE) { | |
797 | case CS5: | |
798 | bits = 7; | |
799 | info->zs_channel->curregs[3] |= Rx5; | |
800 | info->zs_channel->curregs[5] |= Tx5; | |
801 | break; | |
802 | case CS6: | |
803 | bits = 8; | |
804 | info->zs_channel->curregs[3] |= Rx6; | |
805 | info->zs_channel->curregs[5] |= Tx6; | |
806 | break; | |
807 | case CS7: | |
808 | bits = 9; | |
809 | info->zs_channel->curregs[3] |= Rx7; | |
810 | info->zs_channel->curregs[5] |= Tx7; | |
811 | break; | |
812 | case CS8: | |
813 | default: /* defaults to 8 bits */ | |
814 | bits = 10; | |
815 | info->zs_channel->curregs[3] |= Rx8; | |
816 | info->zs_channel->curregs[5] |= Tx8; | |
817 | break; | |
818 | } | |
819 | ||
820 | info->timeout = ((info->xmit_fifo_size*HZ*bits) / info->zs_baud); | |
821 | info->timeout += HZ/50; /* Add .02 seconds of slop */ | |
822 | ||
823 | info->zs_channel->curregs[4] &= ~(SB_MASK | PAR_ENA | PAR_EVEN); | |
824 | if (cflag & CSTOPB) { | |
825 | info->zs_channel->curregs[4] |= SB2; | |
826 | } else { | |
827 | info->zs_channel->curregs[4] |= SB1; | |
828 | } | |
829 | if (cflag & PARENB) { | |
830 | info->zs_channel->curregs[4] |= PAR_ENA; | |
831 | } | |
832 | if (!(cflag & PARODD)) { | |
833 | info->zs_channel->curregs[4] |= PAR_EVEN; | |
834 | } | |
835 | ||
836 | if (!(cflag & CLOCAL)) { | |
837 | if (!(info->zs_channel->curregs[15] & DCDIE)) | |
838 | info->read_reg_zero = read_zsreg(info->zs_channel, 0); | |
839 | info->zs_channel->curregs[15] |= DCDIE; | |
840 | } else | |
841 | info->zs_channel->curregs[15] &= ~DCDIE; | |
842 | if (cflag & CRTSCTS) { | |
843 | info->zs_channel->curregs[15] |= CTSIE; | |
844 | if ((read_zsreg(info->zs_channel, 0) & CTS) == 0) | |
845 | info->tx_stopped = 1; | |
846 | } else { | |
847 | info->zs_channel->curregs[15] &= ~CTSIE; | |
848 | info->tx_stopped = 0; | |
849 | } | |
850 | ||
851 | /* Load up the new values */ | |
852 | load_zsregs(info->zs_channel, info->zs_channel->curregs); | |
853 | ||
0905780a | 854 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
855 | } |
856 | ||
857 | static void rs_flush_chars(struct tty_struct *tty) | |
858 | { | |
859 | struct dec_serial *info = (struct dec_serial *)tty->driver_data; | |
860 | unsigned long flags; | |
861 | ||
862 | if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) | |
863 | return; | |
864 | ||
865 | if (info->xmit_cnt <= 0 || tty->stopped || info->tx_stopped || | |
866 | !info->xmit_buf) | |
867 | return; | |
868 | ||
869 | /* Enable transmitter */ | |
0905780a | 870 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 | 871 | transmit_chars(info); |
0905780a | 872 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
873 | } |
874 | ||
875 | static int rs_write(struct tty_struct * tty, | |
876 | const unsigned char *buf, int count) | |
877 | { | |
878 | int c, total = 0; | |
879 | struct dec_serial *info = (struct dec_serial *)tty->driver_data; | |
880 | unsigned long flags; | |
881 | ||
882 | if (serial_paranoia_check(info, tty->name, "rs_write")) | |
883 | return 0; | |
884 | ||
885 | if (!tty || !info->xmit_buf) | |
886 | return 0; | |
887 | ||
1da177e4 | 888 | while (1) { |
0905780a | 889 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 LT |
890 | c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, |
891 | SERIAL_XMIT_SIZE - info->xmit_head)); | |
892 | if (c <= 0) | |
893 | break; | |
894 | ||
0905780a | 895 | memcpy(info->xmit_buf + info->xmit_head, buf, c); |
1da177e4 LT |
896 | info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); |
897 | info->xmit_cnt += c; | |
0905780a | 898 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
899 | buf += c; |
900 | count -= c; | |
901 | total += c; | |
902 | } | |
903 | ||
904 | if (info->xmit_cnt && !tty->stopped && !info->tx_stopped | |
905 | && !info->tx_active) | |
906 | transmit_chars(info); | |
0905780a | 907 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
908 | return total; |
909 | } | |
910 | ||
911 | static int rs_write_room(struct tty_struct *tty) | |
912 | { | |
913 | struct dec_serial *info = (struct dec_serial *)tty->driver_data; | |
914 | int ret; | |
915 | ||
916 | if (serial_paranoia_check(info, tty->name, "rs_write_room")) | |
917 | return 0; | |
918 | ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; | |
919 | if (ret < 0) | |
920 | ret = 0; | |
921 | return ret; | |
922 | } | |
923 | ||
924 | static int rs_chars_in_buffer(struct tty_struct *tty) | |
925 | { | |
926 | struct dec_serial *info = (struct dec_serial *)tty->driver_data; | |
927 | ||
928 | if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) | |
929 | return 0; | |
930 | return info->xmit_cnt; | |
931 | } | |
932 | ||
933 | static void rs_flush_buffer(struct tty_struct *tty) | |
934 | { | |
935 | struct dec_serial *info = (struct dec_serial *)tty->driver_data; | |
936 | ||
937 | if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) | |
938 | return; | |
0905780a | 939 | spin_lock_irq(&zs_lock); |
1da177e4 | 940 | info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; |
0905780a | 941 | spin_unlock_irq(&zs_lock); |
1da177e4 LT |
942 | tty_wakeup(tty); |
943 | } | |
944 | ||
945 | /* | |
946 | * ------------------------------------------------------------ | |
947 | * rs_throttle() | |
948 | * | |
949 | * This routine is called by the upper-layer tty layer to signal that | |
950 | * incoming characters should be throttled. | |
951 | * ------------------------------------------------------------ | |
952 | */ | |
953 | static void rs_throttle(struct tty_struct * tty) | |
954 | { | |
955 | struct dec_serial *info = (struct dec_serial *)tty->driver_data; | |
956 | unsigned long flags; | |
957 | ||
958 | #ifdef SERIAL_DEBUG_THROTTLE | |
959 | char buf[64]; | |
960 | ||
961 | printk("throttle %s: %d....\n", _tty_name(tty, buf), | |
962 | tty->ldisc.chars_in_buffer(tty)); | |
963 | #endif | |
964 | ||
965 | if (serial_paranoia_check(info, tty->name, "rs_throttle")) | |
966 | return; | |
967 | ||
968 | if (I_IXOFF(tty)) { | |
0905780a | 969 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 LT |
970 | info->x_char = STOP_CHAR(tty); |
971 | if (!info->tx_active) | |
972 | transmit_chars(info); | |
0905780a | 973 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
974 | } |
975 | ||
976 | if (C_CRTSCTS(tty)) { | |
977 | zs_rtsdtr(info, RTS, 0); | |
978 | } | |
979 | } | |
980 | ||
981 | static void rs_unthrottle(struct tty_struct * tty) | |
982 | { | |
983 | struct dec_serial *info = (struct dec_serial *)tty->driver_data; | |
984 | unsigned long flags; | |
985 | ||
986 | #ifdef SERIAL_DEBUG_THROTTLE | |
987 | char buf[64]; | |
988 | ||
989 | printk("unthrottle %s: %d....\n", _tty_name(tty, buf), | |
990 | tty->ldisc.chars_in_buffer(tty)); | |
991 | #endif | |
992 | ||
993 | if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) | |
994 | return; | |
995 | ||
996 | if (I_IXOFF(tty)) { | |
0905780a | 997 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 LT |
998 | if (info->x_char) |
999 | info->x_char = 0; | |
1000 | else { | |
1001 | info->x_char = START_CHAR(tty); | |
1002 | if (!info->tx_active) | |
1003 | transmit_chars(info); | |
1004 | } | |
0905780a | 1005 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
1006 | } |
1007 | ||
1008 | if (C_CRTSCTS(tty)) { | |
1009 | zs_rtsdtr(info, RTS, 1); | |
1010 | } | |
1011 | } | |
1012 | ||
1013 | /* | |
1014 | * ------------------------------------------------------------ | |
1015 | * rs_ioctl() and friends | |
1016 | * ------------------------------------------------------------ | |
1017 | */ | |
1018 | ||
1019 | static int get_serial_info(struct dec_serial * info, | |
1020 | struct serial_struct * retinfo) | |
1021 | { | |
1022 | struct serial_struct tmp; | |
1023 | ||
1024 | if (!retinfo) | |
1025 | return -EFAULT; | |
1026 | memset(&tmp, 0, sizeof(tmp)); | |
1027 | tmp.type = info->type; | |
1028 | tmp.line = info->line; | |
1029 | tmp.port = info->port; | |
1030 | tmp.irq = info->irq; | |
1031 | tmp.flags = info->flags; | |
1032 | tmp.baud_base = info->baud_base; | |
1033 | tmp.close_delay = info->close_delay; | |
1034 | tmp.closing_wait = info->closing_wait; | |
1035 | tmp.custom_divisor = info->custom_divisor; | |
1036 | return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0; | |
1037 | } | |
1038 | ||
1039 | static int set_serial_info(struct dec_serial * info, | |
1040 | struct serial_struct * new_info) | |
1041 | { | |
1042 | struct serial_struct new_serial; | |
1043 | struct dec_serial old_info; | |
1044 | int retval = 0; | |
1045 | ||
1046 | if (!new_info) | |
1047 | return -EFAULT; | |
1048 | copy_from_user(&new_serial,new_info,sizeof(new_serial)); | |
1049 | old_info = *info; | |
1050 | ||
1051 | if (!capable(CAP_SYS_ADMIN)) { | |
1052 | if ((new_serial.baud_base != info->baud_base) || | |
1053 | (new_serial.type != info->type) || | |
1054 | (new_serial.close_delay != info->close_delay) || | |
1055 | ((new_serial.flags & ~ZILOG_USR_MASK) != | |
1056 | (info->flags & ~ZILOG_USR_MASK))) | |
1057 | return -EPERM; | |
1058 | info->flags = ((info->flags & ~ZILOG_USR_MASK) | | |
1059 | (new_serial.flags & ZILOG_USR_MASK)); | |
1060 | info->custom_divisor = new_serial.custom_divisor; | |
1061 | goto check_and_exit; | |
1062 | } | |
1063 | ||
1064 | if (info->count > 1) | |
1065 | return -EBUSY; | |
1066 | ||
1067 | /* | |
1068 | * OK, past this point, all the error checking has been done. | |
1069 | * At this point, we start making changes..... | |
1070 | */ | |
1071 | ||
1072 | info->baud_base = new_serial.baud_base; | |
1073 | info->flags = ((info->flags & ~ZILOG_FLAGS) | | |
1074 | (new_serial.flags & ZILOG_FLAGS)); | |
1075 | info->type = new_serial.type; | |
1076 | info->close_delay = new_serial.close_delay; | |
1077 | info->closing_wait = new_serial.closing_wait; | |
1078 | ||
1079 | check_and_exit: | |
1080 | retval = zs_startup(info); | |
1081 | return retval; | |
1082 | } | |
1083 | ||
1084 | /* | |
1085 | * get_lsr_info - get line status register info | |
1086 | * | |
1087 | * Purpose: Let user call ioctl() to get info when the UART physically | |
1088 | * is emptied. On bus types like RS485, the transmitter must | |
1089 | * release the bus after transmitting. This must be done when | |
1090 | * the transmit shift register is empty, not be done when the | |
1091 | * transmit holding register is empty. This functionality | |
1092 | * allows an RS485 driver to be written in user space. | |
1093 | */ | |
1094 | static int get_lsr_info(struct dec_serial * info, unsigned int *value) | |
1095 | { | |
1096 | unsigned char status; | |
1097 | ||
0905780a | 1098 | spin_lock(&zs_lock); |
1da177e4 | 1099 | status = read_zsreg(info->zs_channel, 0); |
0905780a | 1100 | spin_unlock_irq(&zs_lock); |
1da177e4 LT |
1101 | put_user(status,value); |
1102 | return 0; | |
1103 | } | |
1104 | ||
1105 | static int rs_tiocmget(struct tty_struct *tty, struct file *file) | |
1106 | { | |
1107 | struct dec_serial * info = (struct dec_serial *)tty->driver_data; | |
1108 | unsigned char control, status_a, status_b; | |
1109 | unsigned int result; | |
1110 | ||
1111 | if (info->hook) | |
1112 | return -ENODEV; | |
1113 | ||
1114 | if (serial_paranoia_check(info, tty->name, __FUNCTION__)) | |
1115 | return -ENODEV; | |
1116 | ||
1117 | if (tty->flags & (1 << TTY_IO_ERROR)) | |
1118 | return -EIO; | |
1119 | ||
1120 | if (info->zs_channel == info->zs_chan_a) | |
1121 | result = 0; | |
1122 | else { | |
0905780a | 1123 | spin_lock(&zs_lock); |
1da177e4 LT |
1124 | control = info->zs_chan_a->curregs[5]; |
1125 | status_a = read_zsreg(info->zs_chan_a, 0); | |
1126 | status_b = read_zsreg(info->zs_channel, 0); | |
0905780a | 1127 | spin_unlock_irq(&zs_lock); |
1da177e4 LT |
1128 | result = ((control & RTS) ? TIOCM_RTS: 0) |
1129 | | ((control & DTR) ? TIOCM_DTR: 0) | |
1130 | | ((status_b & DCD) ? TIOCM_CAR: 0) | |
1131 | | ((status_a & DCD) ? TIOCM_RNG: 0) | |
1132 | | ((status_a & SYNC_HUNT) ? TIOCM_DSR: 0) | |
1133 | | ((status_b & CTS) ? TIOCM_CTS: 0); | |
1134 | } | |
1135 | return result; | |
1136 | } | |
1137 | ||
1138 | static int rs_tiocmset(struct tty_struct *tty, struct file *file, | |
1139 | unsigned int set, unsigned int clear) | |
1140 | { | |
1141 | struct dec_serial * info = (struct dec_serial *)tty->driver_data; | |
1da177e4 LT |
1142 | |
1143 | if (info->hook) | |
1144 | return -ENODEV; | |
1145 | ||
1146 | if (serial_paranoia_check(info, tty->name, __FUNCTION__)) | |
1147 | return -ENODEV; | |
1148 | ||
1149 | if (tty->flags & (1 << TTY_IO_ERROR)) | |
1150 | return -EIO; | |
1151 | ||
1152 | if (info->zs_channel == info->zs_chan_a) | |
1153 | return 0; | |
1154 | ||
0905780a | 1155 | spin_lock(&zs_lock); |
1da177e4 LT |
1156 | if (set & TIOCM_RTS) |
1157 | info->zs_chan_a->curregs[5] |= RTS; | |
1158 | if (set & TIOCM_DTR) | |
1159 | info->zs_chan_a->curregs[5] |= DTR; | |
1160 | if (clear & TIOCM_RTS) | |
1161 | info->zs_chan_a->curregs[5] &= ~RTS; | |
1162 | if (clear & TIOCM_DTR) | |
1163 | info->zs_chan_a->curregs[5] &= ~DTR; | |
1164 | write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]); | |
0905780a | 1165 | spin_unlock_irq(&zs_lock); |
1da177e4 LT |
1166 | return 0; |
1167 | } | |
1168 | ||
1169 | /* | |
1170 | * rs_break - turn transmit break condition on/off | |
1171 | */ | |
1172 | static void rs_break(struct tty_struct *tty, int break_state) | |
1173 | { | |
1174 | struct dec_serial *info = (struct dec_serial *) tty->driver_data; | |
1175 | unsigned long flags; | |
1176 | ||
1177 | if (serial_paranoia_check(info, tty->name, "rs_break")) | |
1178 | return; | |
1179 | if (!info->port) | |
1180 | return; | |
1181 | ||
0905780a | 1182 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 LT |
1183 | if (break_state == -1) |
1184 | info->zs_channel->curregs[5] |= SND_BRK; | |
1185 | else | |
1186 | info->zs_channel->curregs[5] &= ~SND_BRK; | |
1187 | write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]); | |
0905780a | 1188 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
1189 | } |
1190 | ||
1191 | static int rs_ioctl(struct tty_struct *tty, struct file * file, | |
1192 | unsigned int cmd, unsigned long arg) | |
1193 | { | |
1da177e4 LT |
1194 | struct dec_serial * info = (struct dec_serial *)tty->driver_data; |
1195 | ||
1196 | if (info->hook) | |
1197 | return -ENODEV; | |
1198 | ||
1199 | if (serial_paranoia_check(info, tty->name, "rs_ioctl")) | |
1200 | return -ENODEV; | |
1201 | ||
1202 | if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && | |
1203 | (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && | |
1204 | (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { | |
1205 | if (tty->flags & (1 << TTY_IO_ERROR)) | |
1206 | return -EIO; | |
1207 | } | |
1208 | ||
1209 | switch (cmd) { | |
1210 | case TIOCGSERIAL: | |
1211 | if (!access_ok(VERIFY_WRITE, (void *)arg, | |
1212 | sizeof(struct serial_struct))) | |
1213 | return -EFAULT; | |
1214 | return get_serial_info(info, (struct serial_struct *)arg); | |
1215 | ||
1216 | case TIOCSSERIAL: | |
1217 | return set_serial_info(info, (struct serial_struct *)arg); | |
1218 | ||
1219 | case TIOCSERGETLSR: /* Get line status register */ | |
1220 | if (!access_ok(VERIFY_WRITE, (void *)arg, | |
1221 | sizeof(unsigned int))) | |
1222 | return -EFAULT; | |
1223 | return get_lsr_info(info, (unsigned int *)arg); | |
1224 | ||
1225 | case TIOCSERGSTRUCT: | |
1226 | if (!access_ok(VERIFY_WRITE, (void *)arg, | |
1227 | sizeof(struct dec_serial))) | |
1228 | return -EFAULT; | |
1229 | copy_from_user((struct dec_serial *)arg, info, | |
1230 | sizeof(struct dec_serial)); | |
1231 | return 0; | |
1232 | ||
1233 | default: | |
1234 | return -ENOIOCTLCMD; | |
1235 | } | |
1236 | return 0; | |
1237 | } | |
1238 | ||
606d099c | 1239 | static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) |
1da177e4 LT |
1240 | { |
1241 | struct dec_serial *info = (struct dec_serial *)tty->driver_data; | |
1242 | int was_stopped; | |
1243 | ||
1244 | if (tty->termios->c_cflag == old_termios->c_cflag) | |
1245 | return; | |
1246 | was_stopped = info->tx_stopped; | |
1247 | ||
1248 | change_speed(info); | |
1249 | ||
1250 | if (was_stopped && !info->tx_stopped) | |
1251 | rs_start(tty); | |
1252 | } | |
1253 | ||
1254 | /* | |
1255 | * ------------------------------------------------------------ | |
1256 | * rs_close() | |
1257 | * | |
1258 | * This routine is called when the serial port gets closed. | |
1259 | * Wait for the last remaining data to be sent. | |
1260 | * ------------------------------------------------------------ | |
1261 | */ | |
1262 | static void rs_close(struct tty_struct *tty, struct file * filp) | |
1263 | { | |
1264 | struct dec_serial * info = (struct dec_serial *)tty->driver_data; | |
1265 | unsigned long flags; | |
1266 | ||
1267 | if (!info || serial_paranoia_check(info, tty->name, "rs_close")) | |
1268 | return; | |
1269 | ||
0905780a | 1270 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 LT |
1271 | |
1272 | if (tty_hung_up_p(filp)) { | |
0905780a | 1273 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
1274 | return; |
1275 | } | |
1276 | ||
1277 | #ifdef SERIAL_DEBUG_OPEN | |
1278 | printk("rs_close ttyS%d, count = %d\n", info->line, info->count); | |
1279 | #endif | |
1280 | if ((tty->count == 1) && (info->count != 1)) { | |
1281 | /* | |
1282 | * Uh, oh. tty->count is 1, which means that the tty | |
1283 | * structure will be freed. Info->count should always | |
1284 | * be one in these conditions. If it's greater than | |
1285 | * one, we've got real problems, since it means the | |
1286 | * serial port won't be shutdown. | |
1287 | */ | |
1288 | printk("rs_close: bad serial port count; tty->count is 1, " | |
1289 | "info->count is %d\n", info->count); | |
1290 | info->count = 1; | |
1291 | } | |
1292 | if (--info->count < 0) { | |
1293 | printk("rs_close: bad serial port count for ttyS%d: %d\n", | |
1294 | info->line, info->count); | |
1295 | info->count = 0; | |
1296 | } | |
1297 | if (info->count) { | |
0905780a | 1298 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
1299 | return; |
1300 | } | |
1301 | info->flags |= ZILOG_CLOSING; | |
1302 | /* | |
1303 | * Now we wait for the transmit buffer to clear; and we notify | |
1304 | * the line discipline to only process XON/XOFF characters. | |
1305 | */ | |
1306 | tty->closing = 1; | |
1307 | if (info->closing_wait != ZILOG_CLOSING_WAIT_NONE) | |
1308 | tty_wait_until_sent(tty, info->closing_wait); | |
1309 | /* | |
1310 | * At this point we stop accepting input. To do this, we | |
1311 | * disable the receiver and receive interrupts. | |
1312 | */ | |
1313 | info->zs_channel->curregs[3] &= ~RxENABLE; | |
1314 | write_zsreg(info->zs_channel, 3, info->zs_channel->curregs[3]); | |
1315 | info->zs_channel->curregs[1] = 0; /* disable any rx ints */ | |
1316 | write_zsreg(info->zs_channel, 1, info->zs_channel->curregs[1]); | |
1317 | ZS_CLEARFIFO(info->zs_channel); | |
1318 | if (info->flags & ZILOG_INITIALIZED) { | |
1319 | /* | |
1320 | * Before we drop DTR, make sure the SCC transmitter | |
1321 | * has completely drained. | |
1322 | */ | |
1323 | rs_wait_until_sent(tty, info->timeout); | |
1324 | } | |
1325 | ||
1326 | shutdown(info); | |
1327 | if (tty->driver->flush_buffer) | |
1328 | tty->driver->flush_buffer(tty); | |
1329 | tty_ldisc_flush(tty); | |
1330 | tty->closing = 0; | |
1331 | info->event = 0; | |
1332 | info->tty = 0; | |
1333 | if (info->blocked_open) { | |
1334 | if (info->close_delay) { | |
1335 | msleep_interruptible(jiffies_to_msecs(info->close_delay)); | |
1336 | } | |
1337 | wake_up_interruptible(&info->open_wait); | |
1338 | } | |
1339 | info->flags &= ~(ZILOG_NORMAL_ACTIVE|ZILOG_CLOSING); | |
1340 | wake_up_interruptible(&info->close_wait); | |
0905780a | 1341 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
1342 | } |
1343 | ||
1344 | /* | |
1345 | * rs_wait_until_sent() --- wait until the transmitter is empty | |
1346 | */ | |
1347 | static void rs_wait_until_sent(struct tty_struct *tty, int timeout) | |
1348 | { | |
1349 | struct dec_serial *info = (struct dec_serial *) tty->driver_data; | |
1350 | unsigned long orig_jiffies; | |
1351 | int char_time; | |
1352 | ||
1353 | if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) | |
1354 | return; | |
1355 | ||
1356 | orig_jiffies = jiffies; | |
1357 | /* | |
1358 | * Set the check interval to be 1/5 of the estimated time to | |
1359 | * send a single character, and make it at least 1. The check | |
1360 | * interval should also be less than the timeout. | |
1361 | */ | |
1362 | char_time = (info->timeout - HZ/50) / info->xmit_fifo_size; | |
1363 | char_time = char_time / 5; | |
1364 | if (char_time == 0) | |
1365 | char_time = 1; | |
1366 | if (timeout) | |
1367 | char_time = min(char_time, timeout); | |
1368 | while ((read_zsreg(info->zs_channel, 1) & Tx_BUF_EMP) == 0) { | |
1369 | msleep_interruptible(jiffies_to_msecs(char_time)); | |
1370 | if (signal_pending(current)) | |
1371 | break; | |
1372 | if (timeout && time_after(jiffies, orig_jiffies + timeout)) | |
1373 | break; | |
1374 | } | |
1375 | current->state = TASK_RUNNING; | |
1376 | } | |
1377 | ||
1378 | /* | |
1379 | * rs_hangup() --- called by tty_hangup() when a hangup is signaled. | |
1380 | */ | |
0905780a | 1381 | static void rs_hangup(struct tty_struct *tty) |
1da177e4 LT |
1382 | { |
1383 | struct dec_serial * info = (struct dec_serial *)tty->driver_data; | |
1384 | ||
1385 | if (serial_paranoia_check(info, tty->name, "rs_hangup")) | |
1386 | return; | |
1387 | ||
1388 | rs_flush_buffer(tty); | |
1389 | shutdown(info); | |
1390 | info->event = 0; | |
1391 | info->count = 0; | |
1392 | info->flags &= ~ZILOG_NORMAL_ACTIVE; | |
1393 | info->tty = 0; | |
1394 | wake_up_interruptible(&info->open_wait); | |
1395 | } | |
1396 | ||
1397 | /* | |
1398 | * ------------------------------------------------------------ | |
1399 | * rs_open() and friends | |
1400 | * ------------------------------------------------------------ | |
1401 | */ | |
1402 | static int block_til_ready(struct tty_struct *tty, struct file * filp, | |
1403 | struct dec_serial *info) | |
1404 | { | |
1405 | DECLARE_WAITQUEUE(wait, current); | |
1406 | int retval; | |
1407 | int do_clocal = 0; | |
1408 | ||
1409 | /* | |
1410 | * If the device is in the middle of being closed, then block | |
1411 | * until it's done, and then try again. | |
1412 | */ | |
1413 | if (info->flags & ZILOG_CLOSING) { | |
1414 | interruptible_sleep_on(&info->close_wait); | |
1415 | #ifdef SERIAL_DO_RESTART | |
1416 | return ((info->flags & ZILOG_HUP_NOTIFY) ? | |
1417 | -EAGAIN : -ERESTARTSYS); | |
1418 | #else | |
1419 | return -EAGAIN; | |
1420 | #endif | |
1421 | } | |
1422 | ||
1423 | /* | |
1424 | * If non-blocking mode is set, or the port is not enabled, | |
1425 | * then make the check up front and then exit. | |
1426 | */ | |
1427 | if ((filp->f_flags & O_NONBLOCK) || | |
1428 | (tty->flags & (1 << TTY_IO_ERROR))) { | |
1429 | info->flags |= ZILOG_NORMAL_ACTIVE; | |
1430 | return 0; | |
1431 | } | |
1432 | ||
1433 | if (tty->termios->c_cflag & CLOCAL) | |
1434 | do_clocal = 1; | |
1435 | ||
1436 | /* | |
1437 | * Block waiting for the carrier detect and the line to become | |
1438 | * free (i.e., not in use by the callout). While we are in | |
1439 | * this loop, info->count is dropped by one, so that | |
1440 | * rs_close() knows when to free things. We restore it upon | |
1441 | * exit, either normal or abnormal. | |
1442 | */ | |
1443 | retval = 0; | |
1444 | add_wait_queue(&info->open_wait, &wait); | |
1445 | #ifdef SERIAL_DEBUG_OPEN | |
1446 | printk("block_til_ready before block: ttyS%d, count = %d\n", | |
1447 | info->line, info->count); | |
1448 | #endif | |
0905780a | 1449 | spin_lock(&zs_lock); |
1da177e4 LT |
1450 | if (!tty_hung_up_p(filp)) |
1451 | info->count--; | |
0905780a | 1452 | spin_unlock_irq(&zs_lock); |
1da177e4 LT |
1453 | info->blocked_open++; |
1454 | while (1) { | |
0905780a | 1455 | spin_lock(&zs_lock); |
1da177e4 LT |
1456 | if (tty->termios->c_cflag & CBAUD) |
1457 | zs_rtsdtr(info, RTS | DTR, 1); | |
0905780a | 1458 | spin_unlock_irq(&zs_lock); |
1da177e4 LT |
1459 | set_current_state(TASK_INTERRUPTIBLE); |
1460 | if (tty_hung_up_p(filp) || | |
1461 | !(info->flags & ZILOG_INITIALIZED)) { | |
1462 | #ifdef SERIAL_DO_RESTART | |
1463 | if (info->flags & ZILOG_HUP_NOTIFY) | |
1464 | retval = -EAGAIN; | |
1465 | else | |
1466 | retval = -ERESTARTSYS; | |
1467 | #else | |
1468 | retval = -EAGAIN; | |
1469 | #endif | |
1470 | break; | |
1471 | } | |
1472 | if (!(info->flags & ZILOG_CLOSING) && | |
1473 | (do_clocal || (read_zsreg(info->zs_channel, 0) & DCD))) | |
1474 | break; | |
1475 | if (signal_pending(current)) { | |
1476 | retval = -ERESTARTSYS; | |
1477 | break; | |
1478 | } | |
1479 | #ifdef SERIAL_DEBUG_OPEN | |
1480 | printk("block_til_ready blocking: ttyS%d, count = %d\n", | |
1481 | info->line, info->count); | |
1482 | #endif | |
1483 | schedule(); | |
1484 | } | |
1485 | current->state = TASK_RUNNING; | |
1486 | remove_wait_queue(&info->open_wait, &wait); | |
1487 | if (!tty_hung_up_p(filp)) | |
1488 | info->count++; | |
1489 | info->blocked_open--; | |
1490 | #ifdef SERIAL_DEBUG_OPEN | |
1491 | printk("block_til_ready after blocking: ttyS%d, count = %d\n", | |
1492 | info->line, info->count); | |
1493 | #endif | |
1494 | if (retval) | |
1495 | return retval; | |
1496 | info->flags |= ZILOG_NORMAL_ACTIVE; | |
1497 | return 0; | |
1498 | } | |
1499 | ||
1500 | /* | |
1501 | * This routine is called whenever a serial port is opened. It | |
1502 | * enables interrupts for a serial port, linking in its ZILOG structure into | |
1503 | * the IRQ chain. It also performs the serial-specific | |
1504 | * initialization for the tty structure. | |
1505 | */ | |
0905780a | 1506 | static int rs_open(struct tty_struct *tty, struct file * filp) |
1da177e4 LT |
1507 | { |
1508 | struct dec_serial *info; | |
1509 | int retval, line; | |
1510 | ||
1511 | line = tty->index; | |
1512 | if ((line < 0) || (line >= zs_channels_found)) | |
1513 | return -ENODEV; | |
1514 | info = zs_soft + line; | |
1515 | ||
1516 | if (info->hook) | |
1517 | return -ENODEV; | |
1518 | ||
1519 | if (serial_paranoia_check(info, tty->name, "rs_open")) | |
1520 | return -ENODEV; | |
1521 | #ifdef SERIAL_DEBUG_OPEN | |
1522 | printk("rs_open %s, count = %d\n", tty->name, info->count); | |
1523 | #endif | |
1524 | ||
1525 | info->count++; | |
1526 | tty->driver_data = info; | |
1527 | info->tty = tty; | |
1528 | ||
1529 | /* | |
1530 | * If the port is the middle of closing, bail out now | |
1531 | */ | |
1532 | if (tty_hung_up_p(filp) || | |
1533 | (info->flags & ZILOG_CLOSING)) { | |
1534 | if (info->flags & ZILOG_CLOSING) | |
1535 | interruptible_sleep_on(&info->close_wait); | |
1536 | #ifdef SERIAL_DO_RESTART | |
1537 | return ((info->flags & ZILOG_HUP_NOTIFY) ? | |
1538 | -EAGAIN : -ERESTARTSYS); | |
1539 | #else | |
1540 | return -EAGAIN; | |
1541 | #endif | |
1542 | } | |
1543 | ||
1544 | /* | |
1545 | * Start up serial port | |
1546 | */ | |
1547 | retval = zs_startup(info); | |
1548 | if (retval) | |
1549 | return retval; | |
1550 | ||
1551 | retval = block_til_ready(tty, filp, info); | |
1552 | if (retval) { | |
1553 | #ifdef SERIAL_DEBUG_OPEN | |
1554 | printk("rs_open returning after block_til_ready with %d\n", | |
1555 | retval); | |
1556 | #endif | |
1557 | return retval; | |
1558 | } | |
1559 | ||
1560 | #ifdef CONFIG_SERIAL_DEC_CONSOLE | |
1561 | if (sercons.cflag && sercons.index == line) { | |
1562 | tty->termios->c_cflag = sercons.cflag; | |
1563 | sercons.cflag = 0; | |
1564 | change_speed(info); | |
1565 | } | |
1566 | #endif | |
1567 | ||
1568 | #ifdef SERIAL_DEBUG_OPEN | |
1569 | printk("rs_open %s successful...", tty->name); | |
1570 | #endif | |
1571 | /* tty->low_latency = 1; */ | |
1572 | return 0; | |
1573 | } | |
1574 | ||
1575 | /* Finally, routines used to initialize the serial driver. */ | |
1576 | ||
1577 | static void __init show_serial_version(void) | |
1578 | { | |
1579 | printk("DECstation Z8530 serial driver version 0.09\n"); | |
1580 | } | |
1581 | ||
1582 | /* Initialize Z8530s zs_channels | |
1583 | */ | |
1584 | ||
1585 | static void __init probe_sccs(void) | |
1586 | { | |
1587 | struct dec_serial **pp; | |
1588 | int i, n, n_chips = 0, n_channels, chip, channel; | |
1589 | unsigned long flags; | |
1590 | ||
1591 | /* | |
1592 | * did we get here by accident? | |
1593 | */ | |
1594 | if(!BUS_PRESENT) { | |
1595 | printk("Not on JUNKIO machine, skipping probe_sccs\n"); | |
1596 | return; | |
1597 | } | |
1598 | ||
1da177e4 LT |
1599 | switch(mips_machtype) { |
1600 | #ifdef CONFIG_MACH_DECSTATION | |
1601 | case MACH_DS5000_2X0: | |
1602 | case MACH_DS5900: | |
1da177e4 LT |
1603 | n_chips = 2; |
1604 | zs_parms = &ds_parms; | |
1605 | zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0]; | |
1606 | zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1]; | |
1607 | break; | |
1608 | case MACH_DS5000_1XX: | |
1da177e4 LT |
1609 | n_chips = 2; |
1610 | zs_parms = &ds_parms; | |
1611 | zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0]; | |
1612 | zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1]; | |
1613 | break; | |
1614 | case MACH_DS5000_XX: | |
1da177e4 LT |
1615 | n_chips = 1; |
1616 | zs_parms = &ds_parms; | |
1617 | zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0]; | |
1618 | break; | |
1619 | #endif | |
1620 | default: | |
1621 | panic("zs: unsupported bus"); | |
1622 | } | |
1623 | if (!zs_parms) | |
1624 | panic("zs: uninitialized parms"); | |
1625 | ||
1626 | pp = &zs_chain; | |
1627 | ||
1628 | n_channels = 0; | |
1629 | ||
1630 | for (chip = 0; chip < n_chips; chip++) { | |
1631 | for (channel = 0; channel <= 1; channel++) { | |
1632 | /* | |
1633 | * The sccs reside on the high byte of the 16 bit IOBUS | |
1634 | */ | |
1635 | zs_channels[n_channels].control = | |
a5fc9c0b | 1636 | (volatile void *)CKSEG1ADDR(dec_kn_slot_base + |
1da177e4 LT |
1637 | (0 == chip ? zs_parms->scc0 : zs_parms->scc1) + |
1638 | (0 == channel ? zs_parms->channel_a_offset : | |
a5fc9c0b | 1639 | zs_parms->channel_b_offset)); |
1da177e4 LT |
1640 | zs_channels[n_channels].data = |
1641 | zs_channels[n_channels].control + 4; | |
1642 | ||
1643 | #ifndef CONFIG_SERIAL_DEC_CONSOLE | |
1644 | /* | |
1645 | * We're called early and memory managment isn't up, yet. | |
fb911ee8 | 1646 | * Thus request_region would fail. |
1da177e4 LT |
1647 | */ |
1648 | if (!request_region((unsigned long) | |
1649 | zs_channels[n_channels].control, | |
1650 | ZS_CHAN_IO_SIZE, "SCC")) | |
1651 | panic("SCC I/O region is not free"); | |
1652 | #endif | |
1653 | zs_soft[n_channels].zs_channel = &zs_channels[n_channels]; | |
1654 | /* HACK alert! */ | |
1655 | if (!(chip & 1)) | |
1656 | zs_soft[n_channels].irq = zs_parms->irq0; | |
1657 | else | |
1658 | zs_soft[n_channels].irq = zs_parms->irq1; | |
1659 | ||
1660 | /* | |
1661 | * Identification of channel A. Location of channel A | |
1662 | * inside chip depends on mapping of internal address | |
1663 | * the chip decodes channels by. | |
1664 | * CHANNEL_A_NR returns either 0 (in case of | |
1665 | * DECstations) or 1 (in case of Baget). | |
1666 | */ | |
1667 | if (CHANNEL_A_NR == channel) | |
1668 | zs_soft[n_channels].zs_chan_a = | |
1669 | &zs_channels[n_channels+1-2*CHANNEL_A_NR]; | |
1670 | else | |
1671 | zs_soft[n_channels].zs_chan_a = | |
1672 | &zs_channels[n_channels]; | |
1673 | ||
1674 | *pp = &zs_soft[n_channels]; | |
1675 | pp = &zs_soft[n_channels].zs_next; | |
1676 | n_channels++; | |
1677 | } | |
1678 | } | |
1679 | ||
1680 | *pp = 0; | |
1681 | zs_channels_found = n_channels; | |
1682 | ||
1683 | for (n = 0; n < zs_channels_found; n++) { | |
1684 | for (i = 0; i < 16; i++) { | |
1685 | zs_soft[n].zs_channel->curregs[i] = zs_init_regs[i]; | |
1686 | } | |
1687 | } | |
1688 | ||
0905780a | 1689 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 LT |
1690 | for (n = 0; n < zs_channels_found; n++) { |
1691 | if (n % 2 == 0) { | |
1692 | write_zsreg(zs_soft[n].zs_chan_a, R9, FHWRES); | |
1693 | udelay(10); | |
1694 | write_zsreg(zs_soft[n].zs_chan_a, R9, 0); | |
1695 | } | |
1696 | load_zsregs(zs_soft[n].zs_channel, | |
1697 | zs_soft[n].zs_channel->curregs); | |
1698 | } | |
0905780a | 1699 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
1700 | } |
1701 | ||
b68e31d0 | 1702 | static const struct tty_operations serial_ops = { |
1da177e4 LT |
1703 | .open = rs_open, |
1704 | .close = rs_close, | |
1705 | .write = rs_write, | |
1706 | .flush_chars = rs_flush_chars, | |
1707 | .write_room = rs_write_room, | |
1708 | .chars_in_buffer = rs_chars_in_buffer, | |
1709 | .flush_buffer = rs_flush_buffer, | |
1710 | .ioctl = rs_ioctl, | |
1711 | .throttle = rs_throttle, | |
1712 | .unthrottle = rs_unthrottle, | |
1713 | .set_termios = rs_set_termios, | |
1714 | .stop = rs_stop, | |
1715 | .start = rs_start, | |
1716 | .hangup = rs_hangup, | |
1717 | .break_ctl = rs_break, | |
1718 | .wait_until_sent = rs_wait_until_sent, | |
1719 | .tiocmget = rs_tiocmget, | |
1720 | .tiocmset = rs_tiocmset, | |
1721 | }; | |
1722 | ||
1723 | /* zs_init inits the driver */ | |
1724 | int __init zs_init(void) | |
1725 | { | |
1726 | int channel, i; | |
1727 | struct dec_serial *info; | |
1728 | ||
1729 | if(!BUS_PRESENT) | |
1730 | return -ENODEV; | |
1731 | ||
1da177e4 LT |
1732 | /* Find out how many Z8530 SCCs we have */ |
1733 | if (zs_chain == 0) | |
1734 | probe_sccs(); | |
1735 | serial_driver = alloc_tty_driver(zs_channels_found); | |
1736 | if (!serial_driver) | |
1737 | return -ENOMEM; | |
1738 | ||
1739 | show_serial_version(); | |
1740 | ||
1741 | /* Initialize the tty_driver structure */ | |
1742 | /* Not all of this is exactly right for us. */ | |
1743 | ||
1744 | serial_driver->owner = THIS_MODULE; | |
1da177e4 LT |
1745 | serial_driver->name = "ttyS"; |
1746 | serial_driver->major = TTY_MAJOR; | |
1747 | serial_driver->minor_start = 64; | |
1748 | serial_driver->type = TTY_DRIVER_TYPE_SERIAL; | |
1749 | serial_driver->subtype = SERIAL_TYPE_NORMAL; | |
1750 | serial_driver->init_termios = tty_std_termios; | |
1751 | serial_driver->init_termios.c_cflag = | |
1752 | B9600 | CS8 | CREAD | HUPCL | CLOCAL; | |
331b8319 | 1753 | serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; |
1da177e4 LT |
1754 | tty_set_operations(serial_driver, &serial_ops); |
1755 | ||
1756 | if (tty_register_driver(serial_driver)) | |
1757 | panic("Couldn't register serial driver"); | |
1758 | ||
1759 | for (info = zs_chain, i = 0; info; info = info->zs_next, i++) { | |
1760 | ||
1761 | /* Needed before interrupts are enabled. */ | |
1762 | info->tty = 0; | |
1763 | info->x_char = 0; | |
1764 | ||
1765 | if (info->hook && info->hook->init_info) { | |
1766 | (*info->hook->init_info)(info); | |
1767 | continue; | |
1768 | } | |
1769 | ||
1770 | info->magic = SERIAL_MAGIC; | |
1771 | info->port = (int) info->zs_channel->control; | |
1772 | info->line = i; | |
1773 | info->custom_divisor = 16; | |
1774 | info->close_delay = 50; | |
1775 | info->closing_wait = 3000; | |
1776 | info->event = 0; | |
1777 | info->count = 0; | |
1778 | info->blocked_open = 0; | |
0905780a | 1779 | tasklet_init(&info->tlet, do_softint, (unsigned long)info); |
1da177e4 LT |
1780 | init_waitqueue_head(&info->open_wait); |
1781 | init_waitqueue_head(&info->close_wait); | |
1782 | printk("ttyS%02d at 0x%08x (irq = %d) is a Z85C30 SCC\n", | |
1783 | info->line, info->port, info->irq); | |
1784 | tty_register_device(serial_driver, info->line, NULL); | |
1785 | ||
1786 | } | |
1787 | ||
1788 | for (channel = 0; channel < zs_channels_found; ++channel) { | |
1789 | zs_soft[channel].clk_divisor = 16; | |
1790 | zs_soft[channel].zs_baud = get_zsbaud(&zs_soft[channel]); | |
1791 | ||
dace1453 | 1792 | if (request_irq(zs_soft[channel].irq, rs_interrupt, IRQF_SHARED, |
1da177e4 LT |
1793 | "scc", &zs_soft[channel])) |
1794 | printk(KERN_ERR "decserial: can't get irq %d\n", | |
1795 | zs_soft[channel].irq); | |
1796 | ||
1797 | if (zs_soft[channel].hook) { | |
1798 | zs_startup(&zs_soft[channel]); | |
1799 | if (zs_soft[channel].hook->init_channel) | |
1800 | (*zs_soft[channel].hook->init_channel) | |
1801 | (&zs_soft[channel]); | |
1802 | } | |
1803 | } | |
1804 | ||
1805 | return 0; | |
1806 | } | |
1807 | ||
1808 | /* | |
1809 | * polling I/O routines | |
1810 | */ | |
0905780a | 1811 | static int zs_poll_tx_char(void *handle, unsigned char ch) |
1da177e4 LT |
1812 | { |
1813 | struct dec_serial *info = handle; | |
1814 | struct dec_zschannel *chan = info->zs_channel; | |
1815 | int ret; | |
1816 | ||
1817 | if(chan) { | |
1818 | int loops = 10000; | |
1819 | ||
1820 | while (loops && !(read_zsreg(chan, 0) & Tx_BUF_EMP)) | |
1821 | loops--; | |
1822 | ||
1823 | if (loops) { | |
1824 | write_zsdata(chan, ch); | |
1825 | ret = 0; | |
1826 | } else | |
1827 | ret = -EAGAIN; | |
1828 | ||
1829 | return ret; | |
1830 | } else | |
1831 | return -ENODEV; | |
1832 | } | |
1833 | ||
0905780a | 1834 | static int zs_poll_rx_char(void *handle) |
1da177e4 LT |
1835 | { |
1836 | struct dec_serial *info = handle; | |
1837 | struct dec_zschannel *chan = info->zs_channel; | |
1838 | int ret; | |
1839 | ||
1840 | if(chan) { | |
1841 | int loops = 10000; | |
1842 | ||
1843 | while (loops && !(read_zsreg(chan, 0) & Rx_CH_AV)) | |
1844 | loops--; | |
1845 | ||
1846 | if (loops) | |
1847 | ret = read_zsdata(chan); | |
1848 | else | |
1849 | ret = -EAGAIN; | |
1850 | ||
1851 | return ret; | |
1852 | } else | |
1853 | return -ENODEV; | |
1854 | } | |
1855 | ||
1856 | int register_zs_hook(unsigned int channel, struct dec_serial_hook *hook) | |
1857 | { | |
1858 | struct dec_serial *info = &zs_soft[channel]; | |
1859 | ||
1860 | if (info->hook) { | |
1861 | printk("%s: line %d has already a hook registered\n", | |
1862 | __FUNCTION__, channel); | |
1863 | ||
1864 | return 0; | |
1865 | } else { | |
1866 | hook->poll_rx_char = zs_poll_rx_char; | |
1867 | hook->poll_tx_char = zs_poll_tx_char; | |
1868 | info->hook = hook; | |
1869 | ||
1870 | return 1; | |
1871 | } | |
1872 | } | |
1873 | ||
1874 | int unregister_zs_hook(unsigned int channel) | |
1875 | { | |
1876 | struct dec_serial *info = &zs_soft[channel]; | |
1877 | ||
1878 | if (info->hook) { | |
1879 | info->hook = NULL; | |
1880 | return 1; | |
1881 | } else { | |
1882 | printk("%s: trying to unregister hook on line %d," | |
1883 | " but none is registered\n", __FUNCTION__, channel); | |
1884 | return 0; | |
1885 | } | |
1886 | } | |
1887 | ||
1888 | /* | |
1889 | * ------------------------------------------------------------ | |
1890 | * Serial console driver | |
1891 | * ------------------------------------------------------------ | |
1892 | */ | |
1893 | #ifdef CONFIG_SERIAL_DEC_CONSOLE | |
1894 | ||
1895 | ||
1896 | /* | |
1897 | * Print a string to the serial port trying not to disturb | |
1898 | * any possible real use of the port... | |
1899 | */ | |
1900 | static void serial_console_write(struct console *co, const char *s, | |
1901 | unsigned count) | |
1902 | { | |
1903 | struct dec_serial *info; | |
1904 | int i; | |
1905 | ||
1906 | info = zs_soft + co->index; | |
1907 | ||
1908 | for (i = 0; i < count; i++, s++) { | |
1909 | if(*s == '\n') | |
1910 | zs_poll_tx_char(info, '\r'); | |
1911 | zs_poll_tx_char(info, *s); | |
1912 | } | |
1913 | } | |
1914 | ||
1915 | static struct tty_driver *serial_console_device(struct console *c, int *index) | |
1916 | { | |
1917 | *index = c->index; | |
1918 | return serial_driver; | |
1919 | } | |
1920 | ||
1921 | /* | |
1922 | * Setup initial baud/bits/parity. We do two things here: | |
1923 | * - construct a cflag setting for the first rs_open() | |
1924 | * - initialize the serial port | |
1925 | * Return non-zero if we didn't find a serial port. | |
1926 | */ | |
1927 | static int __init serial_console_setup(struct console *co, char *options) | |
1928 | { | |
1929 | struct dec_serial *info; | |
1930 | int baud = 9600; | |
1931 | int bits = 8; | |
1932 | int parity = 'n'; | |
1933 | int cflag = CREAD | HUPCL | CLOCAL; | |
1934 | int clk_divisor = 16; | |
1935 | int brg; | |
1936 | char *s; | |
1937 | unsigned long flags; | |
1938 | ||
1939 | if(!BUS_PRESENT) | |
1940 | return -ENODEV; | |
1941 | ||
1942 | info = zs_soft + co->index; | |
1943 | ||
1944 | if (zs_chain == 0) | |
1945 | probe_sccs(); | |
1946 | ||
1947 | info->is_cons = 1; | |
1948 | ||
1949 | if (options) { | |
1950 | baud = simple_strtoul(options, NULL, 10); | |
1951 | s = options; | |
1952 | while(*s >= '0' && *s <= '9') | |
1953 | s++; | |
1954 | if (*s) | |
1955 | parity = *s++; | |
1956 | if (*s) | |
1957 | bits = *s - '0'; | |
1958 | } | |
1959 | ||
1960 | /* | |
1961 | * Now construct a cflag setting. | |
1962 | */ | |
1963 | switch(baud) { | |
1964 | case 1200: | |
1965 | cflag |= B1200; | |
1966 | break; | |
1967 | case 2400: | |
1968 | cflag |= B2400; | |
1969 | break; | |
1970 | case 4800: | |
1971 | cflag |= B4800; | |
1972 | break; | |
1973 | case 19200: | |
1974 | cflag |= B19200; | |
1975 | break; | |
1976 | case 38400: | |
1977 | cflag |= B38400; | |
1978 | break; | |
1979 | case 57600: | |
1980 | cflag |= B57600; | |
1981 | break; | |
1982 | case 115200: | |
1983 | cflag |= B115200; | |
1984 | break; | |
1985 | case 9600: | |
1986 | default: | |
1987 | cflag |= B9600; | |
1988 | /* | |
1989 | * Set this to a sane value to prevent a divide error. | |
1990 | */ | |
1991 | baud = 9600; | |
1992 | break; | |
1993 | } | |
1994 | switch(bits) { | |
1995 | case 7: | |
1996 | cflag |= CS7; | |
1997 | break; | |
1998 | default: | |
1999 | case 8: | |
2000 | cflag |= CS8; | |
2001 | break; | |
2002 | } | |
2003 | switch(parity) { | |
2004 | case 'o': case 'O': | |
2005 | cflag |= PARODD; | |
2006 | break; | |
2007 | case 'e': case 'E': | |
2008 | cflag |= PARENB; | |
2009 | break; | |
2010 | } | |
2011 | co->cflag = cflag; | |
2012 | ||
0905780a | 2013 | spin_lock_irqsave(&zs_lock, flags); |
1da177e4 LT |
2014 | |
2015 | /* | |
2016 | * Set up the baud rate generator. | |
2017 | */ | |
2018 | brg = BPS_TO_BRG(baud, zs_parms->clock / clk_divisor); | |
2019 | info->zs_channel->curregs[R12] = (brg & 255); | |
2020 | info->zs_channel->curregs[R13] = ((brg >> 8) & 255); | |
2021 | ||
2022 | /* | |
2023 | * Set byte size and parity. | |
2024 | */ | |
2025 | if (bits == 7) { | |
2026 | info->zs_channel->curregs[R3] |= Rx7; | |
2027 | info->zs_channel->curregs[R5] |= Tx7; | |
2028 | } else { | |
2029 | info->zs_channel->curregs[R3] |= Rx8; | |
2030 | info->zs_channel->curregs[R5] |= Tx8; | |
2031 | } | |
2032 | if (cflag & PARENB) { | |
2033 | info->zs_channel->curregs[R4] |= PAR_ENA; | |
2034 | } | |
2035 | if (!(cflag & PARODD)) { | |
2036 | info->zs_channel->curregs[R4] |= PAR_EVEN; | |
2037 | } | |
2038 | info->zs_channel->curregs[R4] |= SB1; | |
2039 | ||
2040 | /* | |
2041 | * Turn on RTS and DTR. | |
2042 | */ | |
2043 | zs_rtsdtr(info, RTS | DTR, 1); | |
2044 | ||
2045 | /* | |
2046 | * Finally, enable sequencing. | |
2047 | */ | |
2048 | info->zs_channel->curregs[R3] |= RxENABLE; | |
2049 | info->zs_channel->curregs[R5] |= TxENAB; | |
2050 | ||
2051 | /* | |
2052 | * Clear the interrupt registers. | |
2053 | */ | |
2054 | write_zsreg(info->zs_channel, R0, ERR_RES); | |
2055 | write_zsreg(info->zs_channel, R0, RES_H_IUS); | |
2056 | ||
2057 | /* | |
2058 | * Load up the new values. | |
2059 | */ | |
2060 | load_zsregs(info->zs_channel, info->zs_channel->curregs); | |
2061 | ||
2062 | /* Save the current value of RR0 */ | |
2063 | info->read_reg_zero = read_zsreg(info->zs_channel, R0); | |
2064 | ||
2065 | zs_soft[co->index].clk_divisor = clk_divisor; | |
2066 | zs_soft[co->index].zs_baud = get_zsbaud(&zs_soft[co->index]); | |
2067 | ||
0905780a | 2068 | spin_unlock_irqrestore(&zs_lock, flags); |
1da177e4 LT |
2069 | |
2070 | return 0; | |
2071 | } | |
2072 | ||
2073 | static struct console sercons = { | |
2074 | .name = "ttyS", | |
2075 | .write = serial_console_write, | |
2076 | .device = serial_console_device, | |
2077 | .setup = serial_console_setup, | |
2078 | .flags = CON_PRINTBUFFER, | |
2079 | .index = -1, | |
2080 | }; | |
2081 | ||
2082 | /* | |
2083 | * Register console. | |
2084 | */ | |
2085 | void __init zs_serial_console_init(void) | |
2086 | { | |
2087 | register_console(&sercons); | |
2088 | } | |
2089 | #endif /* ifdef CONFIG_SERIAL_DEC_CONSOLE */ | |
2090 | ||
2091 | #ifdef CONFIG_KGDB | |
2092 | struct dec_zschannel *zs_kgdbchan; | |
2093 | static unsigned char scc_inittab[] = { | |
2094 | 9, 0x80, /* reset A side (CHRA) */ | |
2095 | 13, 0, /* set baud rate divisor */ | |
2096 | 12, 1, | |
2097 | 14, 1, /* baud rate gen enable, src=rtxc (BRENABL) */ | |
2098 | 11, 0x50, /* clocks = br gen (RCBR | TCBR) */ | |
2099 | 5, 0x6a, /* tx 8 bits, assert RTS (Tx8 | TxENAB | RTS) */ | |
2100 | 4, 0x44, /* x16 clock, 1 stop (SB1 | X16CLK)*/ | |
2101 | 3, 0xc1, /* rx enable, 8 bits (RxENABLE | Rx8)*/ | |
2102 | }; | |
2103 | ||
2104 | /* These are for receiving and sending characters under the kgdb | |
2105 | * source level kernel debugger. | |
2106 | */ | |
2107 | void putDebugChar(char kgdb_char) | |
2108 | { | |
2109 | struct dec_zschannel *chan = zs_kgdbchan; | |
2110 | while ((read_zsreg(chan, 0) & Tx_BUF_EMP) == 0) | |
2111 | RECOVERY_DELAY; | |
2112 | write_zsdata(chan, kgdb_char); | |
2113 | } | |
2114 | char getDebugChar(void) | |
2115 | { | |
2116 | struct dec_zschannel *chan = zs_kgdbchan; | |
2117 | while((read_zsreg(chan, 0) & Rx_CH_AV) == 0) | |
2118 | eieio(); /*barrier();*/ | |
2119 | return read_zsdata(chan); | |
2120 | } | |
2121 | void kgdb_interruptible(int yes) | |
2122 | { | |
2123 | struct dec_zschannel *chan = zs_kgdbchan; | |
2124 | int one, nine; | |
2125 | nine = read_zsreg(chan, 9); | |
2126 | if (yes == 1) { | |
2127 | one = EXT_INT_ENAB|RxINT_ALL; | |
2128 | nine |= MIE; | |
2129 | printk("turning serial ints on\n"); | |
2130 | } else { | |
2131 | one = RxINT_DISAB; | |
2132 | nine &= ~MIE; | |
2133 | printk("turning serial ints off\n"); | |
2134 | } | |
2135 | write_zsreg(chan, 1, one); | |
2136 | write_zsreg(chan, 9, nine); | |
2137 | } | |
2138 | ||
2139 | static int kgdbhook_init_channel(void *handle) | |
2140 | { | |
2141 | return 0; | |
2142 | } | |
2143 | ||
2144 | static void kgdbhook_init_info(void *handle) | |
2145 | { | |
2146 | } | |
2147 | ||
2148 | static void kgdbhook_rx_char(void *handle, unsigned char ch, unsigned char fl) | |
2149 | { | |
2150 | struct dec_serial *info = handle; | |
2151 | ||
2152 | if (fl != TTY_NORMAL) | |
2153 | return; | |
2154 | if (ch == 0x03 || ch == '$') | |
2155 | breakpoint(); | |
2156 | } | |
2157 | ||
2158 | /* This sets up the serial port we're using, and turns on | |
2159 | * interrupts for that channel, so kgdb is usable once we're done. | |
2160 | */ | |
2161 | static inline void kgdb_chaninit(struct dec_zschannel *ms, int intson, int bps) | |
2162 | { | |
2163 | int brg; | |
2164 | int i, x; | |
2165 | volatile char *sccc = ms->control; | |
2166 | brg = BPS_TO_BRG(bps, zs_parms->clock/16); | |
2167 | printk("setting bps on kgdb line to %d [brg=%x]\n", bps, brg); | |
2168 | for (i = 20000; i != 0; --i) { | |
2169 | x = *sccc; eieio(); | |
2170 | } | |
2171 | for (i = 0; i < sizeof(scc_inittab); ++i) { | |
2172 | write_zsreg(ms, scc_inittab[i], scc_inittab[i+1]); | |
2173 | i++; | |
2174 | } | |
2175 | } | |
2176 | /* This is called at boot time to prime the kgdb serial debugging | |
2177 | * serial line. The 'tty_num' argument is 0 for /dev/ttya and 1 | |
2178 | * for /dev/ttyb which is determined in setup_arch() from the | |
2179 | * boot command line flags. | |
2180 | */ | |
2181 | struct dec_serial_hook zs_kgdbhook = { | |
2182 | .init_channel = kgdbhook_init_channel, | |
2183 | .init_info = kgdbhook_init_info, | |
2184 | .rx_char = kgdbhook_rx_char, | |
2185 | .cflags = B38400 | CS8 | CLOCAL, | |
2186 | } | |
2187 | ||
2188 | void __init zs_kgdb_hook(int tty_num) | |
2189 | { | |
2190 | /* Find out how many Z8530 SCCs we have */ | |
2191 | if (zs_chain == 0) | |
2192 | probe_sccs(); | |
2193 | zs_soft[tty_num].zs_channel = &zs_channels[tty_num]; | |
2194 | zs_kgdbchan = zs_soft[tty_num].zs_channel; | |
2195 | zs_soft[tty_num].change_needed = 0; | |
2196 | zs_soft[tty_num].clk_divisor = 16; | |
2197 | zs_soft[tty_num].zs_baud = 38400; | |
2198 | zs_soft[tty_num].hook = &zs_kgdbhook; /* This runs kgdb */ | |
2199 | /* Turn on transmitter/receiver at 8-bits/char */ | |
2200 | kgdb_chaninit(zs_soft[tty_num].zs_channel, 1, 38400); | |
2201 | printk("KGDB: on channel %d initialized\n", tty_num); | |
2202 | set_debug_traps(); /* init stub */ | |
2203 | } | |
2204 | #endif /* ifdef CONFIG_KGDB */ |