Commit | Line | Data |
---|---|---|
f8441e13 | 1 | /* |
f8441e13 SH |
2 | * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License version 2 | |
6 | * as published by the Free Software Foundation. | |
7 | * | |
8 | * This program is distributed in the hope that it will be useful, | |
9 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
10 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
11 | * GNU General Public License for more details. | |
12 | * | |
13 | * You should have received a copy of the GNU General Public License | |
14 | * along with this program; if not, write to the Free Software | |
15 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
16 | */ | |
17 | ||
f8441e13 SH |
18 | #if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) |
19 | #define SUPPORT_SYSRQ | |
20 | #endif | |
21 | ||
22 | #include <linux/device.h> | |
23 | #include <linux/module.h> | |
24 | #include <linux/ioport.h> | |
25 | #include <linux/init.h> | |
26 | #include <linux/console.h> | |
27 | #include <linux/sysrq.h> | |
28 | #include <linux/platform_device.h> | |
29 | #include <linux/tty.h> | |
30 | #include <linux/tty_flip.h> | |
31 | #include <linux/serial_core.h> | |
32 | #include <linux/serial.h> | |
33 | ||
34 | #include <asm/io.h> | |
35 | #include <asm/irq.h> | |
a09e64fb RK |
36 | #include <mach/hardware.h> |
37 | #include <mach/netx-regs.h> | |
f8441e13 SH |
38 | |
39 | /* We've been assigned a range on the "Low-density serial ports" major */ | |
40 | #define SERIAL_NX_MAJOR 204 | |
41 | #define MINOR_START 170 | |
42 | ||
f8441e13 SH |
43 | enum uart_regs { |
44 | UART_DR = 0x00, | |
45 | UART_SR = 0x04, | |
46 | UART_LINE_CR = 0x08, | |
47 | UART_BAUDDIV_MSB = 0x0c, | |
48 | UART_BAUDDIV_LSB = 0x10, | |
49 | UART_CR = 0x14, | |
50 | UART_FR = 0x18, | |
51 | UART_IIR = 0x1c, | |
52 | UART_ILPR = 0x20, | |
53 | UART_RTS_CR = 0x24, | |
54 | UART_RTS_LEAD = 0x28, | |
55 | UART_RTS_TRAIL = 0x2c, | |
56 | UART_DRV_ENABLE = 0x30, | |
57 | UART_BRM_CR = 0x34, | |
58 | UART_RXFIFO_IRQLEVEL = 0x38, | |
59 | UART_TXFIFO_IRQLEVEL = 0x3c, | |
60 | }; | |
61 | ||
62 | #define SR_FE (1<<0) | |
63 | #define SR_PE (1<<1) | |
64 | #define SR_BE (1<<2) | |
65 | #define SR_OE (1<<3) | |
66 | ||
67 | #define LINE_CR_BRK (1<<0) | |
68 | #define LINE_CR_PEN (1<<1) | |
69 | #define LINE_CR_EPS (1<<2) | |
70 | #define LINE_CR_STP2 (1<<3) | |
71 | #define LINE_CR_FEN (1<<4) | |
72 | #define LINE_CR_5BIT (0<<5) | |
73 | #define LINE_CR_6BIT (1<<5) | |
74 | #define LINE_CR_7BIT (2<<5) | |
75 | #define LINE_CR_8BIT (3<<5) | |
76 | #define LINE_CR_BITS_MASK (3<<5) | |
77 | ||
78 | #define CR_UART_EN (1<<0) | |
79 | #define CR_SIREN (1<<1) | |
80 | #define CR_SIRLP (1<<2) | |
81 | #define CR_MSIE (1<<3) | |
82 | #define CR_RIE (1<<4) | |
83 | #define CR_TIE (1<<5) | |
84 | #define CR_RTIE (1<<6) | |
85 | #define CR_LBE (1<<7) | |
86 | ||
87 | #define FR_CTS (1<<0) | |
88 | #define FR_DSR (1<<1) | |
89 | #define FR_DCD (1<<2) | |
90 | #define FR_BUSY (1<<3) | |
91 | #define FR_RXFE (1<<4) | |
92 | #define FR_TXFF (1<<5) | |
93 | #define FR_RXFF (1<<6) | |
94 | #define FR_TXFE (1<<7) | |
95 | ||
96 | #define IIR_MIS (1<<0) | |
97 | #define IIR_RIS (1<<1) | |
98 | #define IIR_TIS (1<<2) | |
99 | #define IIR_RTIS (1<<3) | |
100 | #define IIR_MASK 0xf | |
101 | ||
102 | #define RTS_CR_AUTO (1<<0) | |
103 | #define RTS_CR_RTS (1<<1) | |
104 | #define RTS_CR_COUNT (1<<2) | |
105 | #define RTS_CR_MOD2 (1<<3) | |
106 | #define RTS_CR_RTS_POL (1<<4) | |
107 | #define RTS_CR_CTS_CTR (1<<5) | |
108 | #define RTS_CR_CTS_POL (1<<6) | |
109 | #define RTS_CR_STICK (1<<7) | |
110 | ||
111 | #define UART_PORT_SIZE 0x40 | |
112 | #define DRIVER_NAME "netx-uart" | |
113 | ||
114 | struct netx_port { | |
115 | struct uart_port port; | |
116 | }; | |
117 | ||
118 | static void netx_stop_tx(struct uart_port *port) | |
119 | { | |
120 | unsigned int val; | |
121 | val = readl(port->membase + UART_CR); | |
122 | writel(val & ~CR_TIE, port->membase + UART_CR); | |
123 | } | |
124 | ||
125 | static void netx_stop_rx(struct uart_port *port) | |
126 | { | |
127 | unsigned int val; | |
128 | val = readl(port->membase + UART_CR); | |
129 | writel(val & ~CR_RIE, port->membase + UART_CR); | |
130 | } | |
131 | ||
132 | static void netx_enable_ms(struct uart_port *port) | |
133 | { | |
134 | unsigned int val; | |
135 | val = readl(port->membase + UART_CR); | |
136 | writel(val | CR_MSIE, port->membase + UART_CR); | |
137 | } | |
138 | ||
139 | static inline void netx_transmit_buffer(struct uart_port *port) | |
140 | { | |
ebd2c8f6 | 141 | struct circ_buf *xmit = &port->state->xmit; |
f8441e13 SH |
142 | |
143 | if (port->x_char) { | |
144 | writel(port->x_char, port->membase + UART_DR); | |
145 | port->icount.tx++; | |
146 | port->x_char = 0; | |
147 | return; | |
148 | } | |
149 | ||
150 | if (uart_tx_stopped(port) || uart_circ_empty(xmit)) { | |
151 | netx_stop_tx(port); | |
152 | return; | |
153 | } | |
154 | ||
155 | do { | |
156 | /* send xmit->buf[xmit->tail] | |
157 | * out the port here */ | |
158 | writel(xmit->buf[xmit->tail], port->membase + UART_DR); | |
159 | xmit->tail = (xmit->tail + 1) & | |
160 | (UART_XMIT_SIZE - 1); | |
161 | port->icount.tx++; | |
162 | if (uart_circ_empty(xmit)) | |
163 | break; | |
164 | } while (!(readl(port->membase + UART_FR) & FR_TXFF)); | |
165 | ||
166 | if (uart_circ_empty(xmit)) | |
167 | netx_stop_tx(port); | |
168 | } | |
169 | ||
170 | static void netx_start_tx(struct uart_port *port) | |
171 | { | |
172 | writel( | |
173 | readl(port->membase + UART_CR) | CR_TIE, port->membase + UART_CR); | |
174 | ||
175 | if (!(readl(port->membase + UART_FR) & FR_TXFF)) | |
176 | netx_transmit_buffer(port); | |
177 | } | |
178 | ||
179 | static unsigned int netx_tx_empty(struct uart_port *port) | |
180 | { | |
181 | return readl(port->membase + UART_FR) & FR_BUSY ? 0 : TIOCSER_TEMT; | |
182 | } | |
183 | ||
184 | static void netx_txint(struct uart_port *port) | |
185 | { | |
ebd2c8f6 | 186 | struct circ_buf *xmit = &port->state->xmit; |
f8441e13 SH |
187 | |
188 | if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { | |
189 | netx_stop_tx(port); | |
190 | return; | |
191 | } | |
192 | ||
193 | netx_transmit_buffer(port); | |
194 | ||
195 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
196 | uart_write_wakeup(port); | |
197 | } | |
198 | ||
c8db1d97 | 199 | static void netx_rxint(struct uart_port *port, unsigned long *flags) |
f8441e13 SH |
200 | { |
201 | unsigned char rx, flg, status; | |
f8441e13 SH |
202 | |
203 | while (!(readl(port->membase + UART_FR) & FR_RXFE)) { | |
204 | rx = readl(port->membase + UART_DR); | |
205 | flg = TTY_NORMAL; | |
206 | port->icount.rx++; | |
207 | status = readl(port->membase + UART_SR); | |
208 | if (status & SR_BE) { | |
209 | writel(0, port->membase + UART_SR); | |
210 | if (uart_handle_break(port)) | |
211 | continue; | |
212 | } | |
213 | ||
214 | if (unlikely(status & (SR_FE | SR_PE | SR_OE))) { | |
215 | ||
216 | if (status & SR_PE) | |
217 | port->icount.parity++; | |
218 | else if (status & SR_FE) | |
219 | port->icount.frame++; | |
220 | if (status & SR_OE) | |
221 | port->icount.overrun++; | |
222 | ||
223 | status &= port->read_status_mask; | |
224 | ||
225 | if (status & SR_BE) | |
226 | flg = TTY_BREAK; | |
227 | else if (status & SR_PE) | |
228 | flg = TTY_PARITY; | |
229 | else if (status & SR_FE) | |
230 | flg = TTY_FRAME; | |
231 | } | |
232 | ||
7d12e780 | 233 | if (uart_handle_sysrq_char(port, rx)) |
f8441e13 SH |
234 | continue; |
235 | ||
236 | uart_insert_char(port, status, SR_OE, rx, flg); | |
237 | } | |
238 | ||
c8db1d97 | 239 | spin_unlock_irqrestore(&port->lock, *flags); |
2e124b4a | 240 | tty_flip_buffer_push(&port->state->port); |
c8db1d97 | 241 | spin_lock_irqsave(&port->lock, *flags); |
f8441e13 SH |
242 | } |
243 | ||
7d12e780 | 244 | static irqreturn_t netx_int(int irq, void *dev_id) |
f8441e13 | 245 | { |
c7bec5ab | 246 | struct uart_port *port = dev_id; |
f8441e13 SH |
247 | unsigned long flags; |
248 | unsigned char status; | |
249 | ||
250 | spin_lock_irqsave(&port->lock,flags); | |
251 | ||
252 | status = readl(port->membase + UART_IIR) & IIR_MASK; | |
253 | while (status) { | |
254 | if (status & IIR_RIS) | |
c8db1d97 | 255 | netx_rxint(port, &flags); |
f8441e13 SH |
256 | if (status & IIR_TIS) |
257 | netx_txint(port); | |
258 | if (status & IIR_MIS) { | |
259 | if (readl(port->membase + UART_FR) & FR_CTS) | |
260 | uart_handle_cts_change(port, 1); | |
261 | else | |
262 | uart_handle_cts_change(port, 0); | |
263 | } | |
264 | writel(0, port->membase + UART_IIR); | |
265 | status = readl(port->membase + UART_IIR) & IIR_MASK; | |
266 | } | |
267 | ||
268 | spin_unlock_irqrestore(&port->lock,flags); | |
269 | return IRQ_HANDLED; | |
270 | } | |
271 | ||
272 | static unsigned int netx_get_mctrl(struct uart_port *port) | |
273 | { | |
274 | unsigned int ret = TIOCM_DSR | TIOCM_CAR; | |
275 | ||
276 | if (readl(port->membase + UART_FR) & FR_CTS) | |
277 | ret |= TIOCM_CTS; | |
278 | ||
279 | return ret; | |
280 | } | |
281 | ||
282 | static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
283 | { | |
284 | unsigned int val; | |
285 | ||
978e595f | 286 | /* FIXME: Locking needed ? */ |
f8441e13 SH |
287 | if (mctrl & TIOCM_RTS) { |
288 | val = readl(port->membase + UART_RTS_CR); | |
289 | writel(val | RTS_CR_RTS, port->membase + UART_RTS_CR); | |
290 | } | |
291 | } | |
292 | ||
293 | static void netx_break_ctl(struct uart_port *port, int break_state) | |
294 | { | |
295 | unsigned int line_cr; | |
296 | spin_lock_irq(&port->lock); | |
297 | ||
298 | line_cr = readl(port->membase + UART_LINE_CR); | |
299 | if (break_state != 0) | |
300 | line_cr |= LINE_CR_BRK; | |
301 | else | |
302 | line_cr &= ~LINE_CR_BRK; | |
303 | writel(line_cr, port->membase + UART_LINE_CR); | |
304 | ||
305 | spin_unlock_irq(&port->lock); | |
306 | } | |
307 | ||
308 | static int netx_startup(struct uart_port *port) | |
309 | { | |
310 | int ret; | |
311 | ||
312 | ret = request_irq(port->irq, netx_int, 0, | |
313 | DRIVER_NAME, port); | |
314 | if (ret) { | |
315 | dev_err(port->dev, "unable to grab irq%d\n",port->irq); | |
316 | goto exit; | |
317 | } | |
318 | ||
319 | writel(readl(port->membase + UART_LINE_CR) | LINE_CR_FEN, | |
320 | port->membase + UART_LINE_CR); | |
321 | ||
322 | writel(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE | CR_UART_EN, | |
323 | port->membase + UART_CR); | |
324 | ||
325 | exit: | |
326 | return ret; | |
327 | } | |
328 | ||
329 | static void netx_shutdown(struct uart_port *port) | |
330 | { | |
331 | writel(0, port->membase + UART_CR) ; | |
332 | ||
333 | free_irq(port->irq, port); | |
334 | } | |
335 | ||
336 | static void | |
606d099c AC |
337 | netx_set_termios(struct uart_port *port, struct ktermios *termios, |
338 | struct ktermios *old) | |
f8441e13 SH |
339 | { |
340 | unsigned int baud, quot; | |
341 | unsigned char old_cr; | |
342 | unsigned char line_cr = LINE_CR_FEN; | |
343 | unsigned char rts_cr = 0; | |
344 | ||
345 | switch (termios->c_cflag & CSIZE) { | |
346 | case CS5: | |
347 | line_cr |= LINE_CR_5BIT; | |
348 | break; | |
349 | case CS6: | |
350 | line_cr |= LINE_CR_6BIT; | |
351 | break; | |
352 | case CS7: | |
353 | line_cr |= LINE_CR_7BIT; | |
354 | break; | |
355 | case CS8: | |
356 | line_cr |= LINE_CR_8BIT; | |
357 | break; | |
358 | } | |
359 | ||
360 | if (termios->c_cflag & CSTOPB) | |
361 | line_cr |= LINE_CR_STP2; | |
362 | ||
363 | if (termios->c_cflag & PARENB) { | |
364 | line_cr |= LINE_CR_PEN; | |
365 | if (!(termios->c_cflag & PARODD)) | |
366 | line_cr |= LINE_CR_EPS; | |
367 | } | |
368 | ||
369 | if (termios->c_cflag & CRTSCTS) | |
370 | rts_cr = RTS_CR_AUTO | RTS_CR_CTS_CTR | RTS_CR_RTS_POL; | |
371 | ||
372 | baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); | |
373 | quot = baud * 4096; | |
374 | quot /= 1000; | |
375 | quot *= 256; | |
376 | quot /= 100000; | |
377 | ||
378 | spin_lock_irq(&port->lock); | |
379 | ||
380 | uart_update_timeout(port, termios->c_cflag, baud); | |
381 | ||
382 | old_cr = readl(port->membase + UART_CR); | |
383 | ||
384 | /* disable interrupts */ | |
385 | writel(old_cr & ~(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE), | |
386 | port->membase + UART_CR); | |
387 | ||
388 | /* drain transmitter */ | |
389 | while (readl(port->membase + UART_FR) & FR_BUSY); | |
390 | ||
391 | /* disable UART */ | |
392 | writel(old_cr & ~CR_UART_EN, port->membase + UART_CR); | |
393 | ||
394 | /* modem status interrupts */ | |
395 | old_cr &= ~CR_MSIE; | |
396 | if (UART_ENABLE_MS(port, termios->c_cflag)) | |
397 | old_cr |= CR_MSIE; | |
398 | ||
399 | writel((quot>>8) & 0xff, port->membase + UART_BAUDDIV_MSB); | |
400 | writel(quot & 0xff, port->membase + UART_BAUDDIV_LSB); | |
401 | writel(line_cr, port->membase + UART_LINE_CR); | |
402 | ||
403 | writel(rts_cr, port->membase + UART_RTS_CR); | |
404 | ||
405 | /* | |
406 | * Characters to ignore | |
407 | */ | |
408 | port->ignore_status_mask = 0; | |
409 | if (termios->c_iflag & IGNPAR) | |
410 | port->ignore_status_mask |= SR_PE; | |
411 | if (termios->c_iflag & IGNBRK) { | |
412 | port->ignore_status_mask |= SR_BE; | |
413 | /* | |
414 | * If we're ignoring parity and break indicators, | |
415 | * ignore overruns too (for real raw support). | |
416 | */ | |
417 | if (termios->c_iflag & IGNPAR) | |
418 | port->ignore_status_mask |= SR_PE; | |
419 | } | |
420 | ||
421 | port->read_status_mask = 0; | |
ef8b9ddc | 422 | if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) |
f8441e13 SH |
423 | port->read_status_mask |= SR_BE; |
424 | if (termios->c_iflag & INPCK) | |
425 | port->read_status_mask |= SR_PE | SR_FE; | |
426 | ||
427 | writel(old_cr, port->membase + UART_CR); | |
428 | ||
429 | spin_unlock_irq(&port->lock); | |
430 | } | |
431 | ||
432 | static const char *netx_type(struct uart_port *port) | |
433 | { | |
434 | return port->type == PORT_NETX ? "NETX" : NULL; | |
435 | } | |
436 | ||
437 | static void netx_release_port(struct uart_port *port) | |
438 | { | |
439 | release_mem_region(port->mapbase, UART_PORT_SIZE); | |
440 | } | |
441 | ||
442 | static int netx_request_port(struct uart_port *port) | |
443 | { | |
444 | return request_mem_region(port->mapbase, UART_PORT_SIZE, | |
445 | DRIVER_NAME) != NULL ? 0 : -EBUSY; | |
446 | } | |
447 | ||
448 | static void netx_config_port(struct uart_port *port, int flags) | |
449 | { | |
450 | if (flags & UART_CONFIG_TYPE && netx_request_port(port) == 0) | |
451 | port->type = PORT_NETX; | |
452 | } | |
453 | ||
454 | static int | |
455 | netx_verify_port(struct uart_port *port, struct serial_struct *ser) | |
456 | { | |
457 | int ret = 0; | |
458 | ||
459 | if (ser->type != PORT_UNKNOWN && ser->type != PORT_NETX) | |
460 | ret = -EINVAL; | |
461 | ||
462 | return ret; | |
463 | } | |
464 | ||
465 | static struct uart_ops netx_pops = { | |
466 | .tx_empty = netx_tx_empty, | |
467 | .set_mctrl = netx_set_mctrl, | |
468 | .get_mctrl = netx_get_mctrl, | |
469 | .stop_tx = netx_stop_tx, | |
470 | .start_tx = netx_start_tx, | |
471 | .stop_rx = netx_stop_rx, | |
472 | .enable_ms = netx_enable_ms, | |
473 | .break_ctl = netx_break_ctl, | |
474 | .startup = netx_startup, | |
475 | .shutdown = netx_shutdown, | |
476 | .set_termios = netx_set_termios, | |
477 | .type = netx_type, | |
478 | .release_port = netx_release_port, | |
479 | .request_port = netx_request_port, | |
480 | .config_port = netx_config_port, | |
481 | .verify_port = netx_verify_port, | |
482 | }; | |
483 | ||
484 | static struct netx_port netx_ports[] = { | |
485 | { | |
486 | .port = { | |
487 | .type = PORT_NETX, | |
488 | .iotype = UPIO_MEM, | |
489 | .membase = (char __iomem *)io_p2v(NETX_PA_UART0), | |
490 | .mapbase = NETX_PA_UART0, | |
491 | .irq = NETX_IRQ_UART0, | |
492 | .uartclk = 100000000, | |
493 | .fifosize = 16, | |
494 | .flags = UPF_BOOT_AUTOCONF, | |
495 | .ops = &netx_pops, | |
496 | .line = 0, | |
497 | }, | |
498 | }, { | |
499 | .port = { | |
500 | .type = PORT_NETX, | |
501 | .iotype = UPIO_MEM, | |
502 | .membase = (char __iomem *)io_p2v(NETX_PA_UART1), | |
503 | .mapbase = NETX_PA_UART1, | |
504 | .irq = NETX_IRQ_UART1, | |
505 | .uartclk = 100000000, | |
506 | .fifosize = 16, | |
507 | .flags = UPF_BOOT_AUTOCONF, | |
508 | .ops = &netx_pops, | |
509 | .line = 1, | |
510 | }, | |
511 | }, { | |
512 | .port = { | |
513 | .type = PORT_NETX, | |
514 | .iotype = UPIO_MEM, | |
515 | .membase = (char __iomem *)io_p2v(NETX_PA_UART2), | |
516 | .mapbase = NETX_PA_UART2, | |
517 | .irq = NETX_IRQ_UART2, | |
518 | .uartclk = 100000000, | |
519 | .fifosize = 16, | |
520 | .flags = UPF_BOOT_AUTOCONF, | |
521 | .ops = &netx_pops, | |
522 | .line = 2, | |
523 | }, | |
524 | } | |
525 | }; | |
526 | ||
fb881f78 PB |
527 | #ifdef CONFIG_SERIAL_NETX_CONSOLE |
528 | ||
f8441e13 SH |
529 | static void netx_console_putchar(struct uart_port *port, int ch) |
530 | { | |
531 | while (readl(port->membase + UART_FR) & FR_BUSY); | |
532 | writel(ch, port->membase + UART_DR); | |
533 | } | |
534 | ||
535 | static void | |
536 | netx_console_write(struct console *co, const char *s, unsigned int count) | |
537 | { | |
538 | struct uart_port *port = &netx_ports[co->index].port; | |
539 | unsigned char cr_save; | |
540 | ||
541 | cr_save = readl(port->membase + UART_CR); | |
542 | writel(cr_save | CR_UART_EN, port->membase + UART_CR); | |
543 | ||
544 | uart_console_write(port, s, count, netx_console_putchar); | |
545 | ||
546 | while (readl(port->membase + UART_FR) & FR_BUSY); | |
547 | writel(cr_save, port->membase + UART_CR); | |
548 | } | |
549 | ||
550 | static void __init | |
551 | netx_console_get_options(struct uart_port *port, int *baud, | |
552 | int *parity, int *bits, int *flow) | |
553 | { | |
554 | unsigned char line_cr; | |
555 | ||
556 | *baud = (readl(port->membase + UART_BAUDDIV_MSB) << 8) | | |
557 | readl(port->membase + UART_BAUDDIV_LSB); | |
558 | *baud *= 1000; | |
559 | *baud /= 4096; | |
560 | *baud *= 1000; | |
561 | *baud /= 256; | |
562 | *baud *= 100; | |
563 | ||
564 | line_cr = readl(port->membase + UART_LINE_CR); | |
565 | *parity = 'n'; | |
566 | if (line_cr & LINE_CR_PEN) { | |
567 | if (line_cr & LINE_CR_EPS) | |
568 | *parity = 'e'; | |
569 | else | |
570 | *parity = 'o'; | |
571 | } | |
572 | ||
573 | switch (line_cr & LINE_CR_BITS_MASK) { | |
574 | case LINE_CR_8BIT: | |
575 | *bits = 8; | |
576 | break; | |
577 | case LINE_CR_7BIT: | |
578 | *bits = 7; | |
579 | break; | |
580 | case LINE_CR_6BIT: | |
581 | *bits = 6; | |
582 | break; | |
583 | case LINE_CR_5BIT: | |
584 | *bits = 5; | |
585 | break; | |
586 | } | |
587 | ||
588 | if (readl(port->membase + UART_RTS_CR) & RTS_CR_AUTO) | |
589 | *flow = 'r'; | |
590 | } | |
591 | ||
592 | static int __init | |
593 | netx_console_setup(struct console *co, char *options) | |
594 | { | |
595 | struct netx_port *sport; | |
596 | int baud = 9600; | |
597 | int bits = 8; | |
598 | int parity = 'n'; | |
599 | int flow = 'n'; | |
600 | ||
601 | /* | |
602 | * Check whether an invalid uart number has been specified, and | |
603 | * if so, search for the first available port that does have | |
604 | * console support. | |
605 | */ | |
606 | if (co->index == -1 || co->index >= ARRAY_SIZE(netx_ports)) | |
607 | co->index = 0; | |
608 | sport = &netx_ports[co->index]; | |
609 | ||
610 | if (options) { | |
611 | uart_parse_options(options, &baud, &parity, &bits, &flow); | |
612 | } else { | |
613 | /* if the UART is enabled, assume it has been correctly setup | |
614 | * by the bootloader and get the options | |
615 | */ | |
616 | if (readl(sport->port.membase + UART_CR) & CR_UART_EN) { | |
617 | netx_console_get_options(&sport->port, &baud, | |
618 | &parity, &bits, &flow); | |
619 | } | |
620 | ||
621 | } | |
622 | ||
623 | return uart_set_options(&sport->port, co, baud, parity, bits, flow); | |
624 | } | |
625 | ||
626 | static struct uart_driver netx_reg; | |
627 | static struct console netx_console = { | |
628 | .name = "ttyNX", | |
629 | .write = netx_console_write, | |
630 | .device = uart_console_device, | |
631 | .setup = netx_console_setup, | |
632 | .flags = CON_PRINTBUFFER, | |
633 | .index = -1, | |
634 | .data = &netx_reg, | |
635 | }; | |
636 | ||
637 | static int __init netx_console_init(void) | |
638 | { | |
639 | register_console(&netx_console); | |
640 | return 0; | |
641 | } | |
642 | console_initcall(netx_console_init); | |
643 | ||
644 | #define NETX_CONSOLE &netx_console | |
645 | #else | |
646 | #define NETX_CONSOLE NULL | |
647 | #endif | |
648 | ||
649 | static struct uart_driver netx_reg = { | |
650 | .owner = THIS_MODULE, | |
651 | .driver_name = DRIVER_NAME, | |
652 | .dev_name = "ttyNX", | |
653 | .major = SERIAL_NX_MAJOR, | |
654 | .minor = MINOR_START, | |
655 | .nr = ARRAY_SIZE(netx_ports), | |
656 | .cons = NETX_CONSOLE, | |
657 | }; | |
658 | ||
659 | static int serial_netx_suspend(struct platform_device *pdev, pm_message_t state) | |
660 | { | |
661 | struct netx_port *sport = platform_get_drvdata(pdev); | |
662 | ||
663 | if (sport) | |
664 | uart_suspend_port(&netx_reg, &sport->port); | |
665 | ||
666 | return 0; | |
667 | } | |
668 | ||
669 | static int serial_netx_resume(struct platform_device *pdev) | |
670 | { | |
671 | struct netx_port *sport = platform_get_drvdata(pdev); | |
672 | ||
673 | if (sport) | |
674 | uart_resume_port(&netx_reg, &sport->port); | |
675 | ||
676 | return 0; | |
677 | } | |
678 | ||
679 | static int serial_netx_probe(struct platform_device *pdev) | |
680 | { | |
681 | struct uart_port *port = &netx_ports[pdev->id].port; | |
682 | ||
683 | dev_info(&pdev->dev, "initialising\n"); | |
684 | ||
685 | port->dev = &pdev->dev; | |
686 | ||
687 | writel(1, port->membase + UART_RXFIFO_IRQLEVEL); | |
688 | uart_add_one_port(&netx_reg, &netx_ports[pdev->id].port); | |
689 | platform_set_drvdata(pdev, &netx_ports[pdev->id]); | |
690 | ||
691 | return 0; | |
692 | } | |
693 | ||
694 | static int serial_netx_remove(struct platform_device *pdev) | |
695 | { | |
696 | struct netx_port *sport = platform_get_drvdata(pdev); | |
697 | ||
f8441e13 SH |
698 | if (sport) |
699 | uart_remove_one_port(&netx_reg, &sport->port); | |
700 | ||
701 | return 0; | |
702 | } | |
703 | ||
704 | static struct platform_driver serial_netx_driver = { | |
705 | .probe = serial_netx_probe, | |
706 | .remove = serial_netx_remove, | |
707 | ||
708 | .suspend = serial_netx_suspend, | |
709 | .resume = serial_netx_resume, | |
710 | ||
711 | .driver = { | |
712 | .name = DRIVER_NAME, | |
713 | }, | |
714 | }; | |
715 | ||
716 | static int __init netx_serial_init(void) | |
717 | { | |
718 | int ret; | |
719 | ||
720 | printk(KERN_INFO "Serial: NetX driver\n"); | |
721 | ||
722 | ret = uart_register_driver(&netx_reg); | |
723 | if (ret) | |
724 | return ret; | |
725 | ||
726 | ret = platform_driver_register(&serial_netx_driver); | |
727 | if (ret != 0) | |
728 | uart_unregister_driver(&netx_reg); | |
729 | ||
730 | return 0; | |
731 | } | |
732 | ||
733 | static void __exit netx_serial_exit(void) | |
734 | { | |
735 | platform_driver_unregister(&serial_netx_driver); | |
736 | uart_unregister_driver(&netx_reg); | |
737 | } | |
738 | ||
739 | module_init(netx_serial_init); | |
740 | module_exit(netx_serial_exit); | |
741 | ||
742 | MODULE_AUTHOR("Sascha Hauer"); | |
743 | MODULE_DESCRIPTION("NetX serial port driver"); | |
744 | MODULE_LICENSE("GPL"); | |
e169c139 | 745 | MODULE_ALIAS("platform:" DRIVER_NAME); |