Commit | Line | Data |
---|---|---|
99edb3d1 | 1 | /* |
b497549a BD |
2 | * Driver core for Samsung SoC onboard UARTs. |
3 | * | |
ccae941e | 4 | * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics |
b497549a BD |
5 | * http://armlinux.simtec.co.uk/ |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License version 2 as | |
9 | * published by the Free Software Foundation. | |
10 | */ | |
11 | ||
12 | /* Hote on 2410 error handling | |
13 | * | |
14 | * The s3c2410 manual has a love/hate affair with the contents of the | |
15 | * UERSTAT register in the UART blocks, and keeps marking some of the | |
16 | * error bits as reserved. Having checked with the s3c2410x01, | |
17 | * it copes with BREAKs properly, so I am happy to ignore the RESERVED | |
18 | * feature from the latter versions of the manual. | |
19 | * | |
20 | * If it becomes aparrent that latter versions of the 2410 remove these | |
21 | * bits, then action will have to be taken to differentiate the versions | |
22 | * and change the policy on BREAK | |
23 | * | |
24 | * BJD, 04-Nov-2004 | |
25 | */ | |
26 | ||
27 | #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) | |
28 | #define SUPPORT_SYSRQ | |
29 | #endif | |
30 | ||
62c37eed RB |
31 | #include <linux/dmaengine.h> |
32 | #include <linux/dma-mapping.h> | |
33 | #include <linux/slab.h> | |
b497549a BD |
34 | #include <linux/module.h> |
35 | #include <linux/ioport.h> | |
36 | #include <linux/io.h> | |
37 | #include <linux/platform_device.h> | |
38 | #include <linux/init.h> | |
39 | #include <linux/sysrq.h> | |
40 | #include <linux/console.h> | |
41 | #include <linux/tty.h> | |
42 | #include <linux/tty_flip.h> | |
43 | #include <linux/serial_core.h> | |
44 | #include <linux/serial.h> | |
9ee51f01 | 45 | #include <linux/serial_s3c.h> |
b497549a BD |
46 | #include <linux/delay.h> |
47 | #include <linux/clk.h> | |
30555476 | 48 | #include <linux/cpufreq.h> |
26c919e1 | 49 | #include <linux/of.h> |
b497549a BD |
50 | |
51 | #include <asm/irq.h> | |
52 | ||
b497549a BD |
53 | #include "samsung.h" |
54 | ||
e4ac92df | 55 | #if defined(CONFIG_SERIAL_SAMSUNG_DEBUG) && \ |
e4ac92df JP |
56 | !defined(MODULE) |
57 | ||
58 | extern void printascii(const char *); | |
59 | ||
60 | __printf(1, 2) | |
61 | static void dbg(const char *fmt, ...) | |
62 | { | |
63 | va_list va; | |
64 | char buff[256]; | |
65 | ||
66 | va_start(va, fmt); | |
a859c8b2 | 67 | vscnprintf(buff, sizeof(buff), fmt, va); |
e4ac92df JP |
68 | va_end(va); |
69 | ||
70 | printascii(buff); | |
71 | } | |
72 | ||
73 | #else | |
74 | #define dbg(fmt, ...) do { if (0) no_printk(fmt, ##__VA_ARGS__); } while (0) | |
75 | #endif | |
76 | ||
b497549a BD |
77 | /* UART name and device definitions */ |
78 | ||
79 | #define S3C24XX_SERIAL_NAME "ttySAC" | |
80 | #define S3C24XX_SERIAL_MAJOR 204 | |
81 | #define S3C24XX_SERIAL_MINOR 64 | |
82 | ||
29bef799 RB |
83 | #define S3C24XX_TX_PIO 1 |
84 | #define S3C24XX_TX_DMA 2 | |
b543c301 RB |
85 | #define S3C24XX_RX_PIO 1 |
86 | #define S3C24XX_RX_DMA 2 | |
b497549a BD |
87 | /* macros to change one thing to another */ |
88 | ||
89 | #define tx_enabled(port) ((port)->unused[0]) | |
90 | #define rx_enabled(port) ((port)->unused[1]) | |
91 | ||
25985edc | 92 | /* flag to ignore all characters coming in */ |
b497549a BD |
93 | #define RXSTAT_DUMMY_READ (0x10000000) |
94 | ||
95 | static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port) | |
96 | { | |
97 | return container_of(port, struct s3c24xx_uart_port, port); | |
98 | } | |
99 | ||
100 | /* translate a port to the device name */ | |
101 | ||
102 | static inline const char *s3c24xx_serial_portname(struct uart_port *port) | |
103 | { | |
104 | return to_platform_device(port->dev)->name; | |
105 | } | |
106 | ||
107 | static int s3c24xx_serial_txempty_nofifo(struct uart_port *port) | |
108 | { | |
9303ac15 | 109 | return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE; |
b497549a BD |
110 | } |
111 | ||
88bb4ea1 TA |
112 | /* |
113 | * s3c64xx and later SoC's include the interrupt mask and status registers in | |
114 | * the controller itself, unlike the s3c24xx SoC's which have these registers | |
115 | * in the interrupt controller. Check if the port type is s3c64xx or higher. | |
116 | */ | |
117 | static int s3c24xx_serial_has_interrupt_mask(struct uart_port *port) | |
118 | { | |
119 | return to_ourport(port)->info->type == PORT_S3C6400; | |
120 | } | |
121 | ||
b497549a BD |
122 | static void s3c24xx_serial_rx_enable(struct uart_port *port) |
123 | { | |
124 | unsigned long flags; | |
125 | unsigned int ucon, ufcon; | |
126 | int count = 10000; | |
127 | ||
128 | spin_lock_irqsave(&port->lock, flags); | |
129 | ||
130 | while (--count && !s3c24xx_serial_txempty_nofifo(port)) | |
131 | udelay(100); | |
132 | ||
133 | ufcon = rd_regl(port, S3C2410_UFCON); | |
134 | ufcon |= S3C2410_UFCON_RESETRX; | |
135 | wr_regl(port, S3C2410_UFCON, ufcon); | |
136 | ||
137 | ucon = rd_regl(port, S3C2410_UCON); | |
138 | ucon |= S3C2410_UCON_RXIRQMODE; | |
139 | wr_regl(port, S3C2410_UCON, ucon); | |
140 | ||
141 | rx_enabled(port) = 1; | |
142 | spin_unlock_irqrestore(&port->lock, flags); | |
143 | } | |
144 | ||
145 | static void s3c24xx_serial_rx_disable(struct uart_port *port) | |
146 | { | |
147 | unsigned long flags; | |
148 | unsigned int ucon; | |
149 | ||
150 | spin_lock_irqsave(&port->lock, flags); | |
151 | ||
152 | ucon = rd_regl(port, S3C2410_UCON); | |
153 | ucon &= ~S3C2410_UCON_RXIRQMODE; | |
154 | wr_regl(port, S3C2410_UCON, ucon); | |
155 | ||
156 | rx_enabled(port) = 0; | |
157 | spin_unlock_irqrestore(&port->lock, flags); | |
158 | } | |
159 | ||
160 | static void s3c24xx_serial_stop_tx(struct uart_port *port) | |
161 | { | |
b73c289c | 162 | struct s3c24xx_uart_port *ourport = to_ourport(port); |
29bef799 RB |
163 | struct s3c24xx_uart_dma *dma = ourport->dma; |
164 | struct circ_buf *xmit = &port->state->xmit; | |
165 | struct dma_tx_state state; | |
166 | int count; | |
b73c289c | 167 | |
29bef799 RB |
168 | if (!tx_enabled(port)) |
169 | return; | |
170 | ||
171 | if (s3c24xx_serial_has_interrupt_mask(port)) | |
172 | __set_bit(S3C64XX_UINTM_TXD, | |
173 | portaddrl(port, S3C64XX_UINTM)); | |
174 | else | |
175 | disable_irq_nosync(ourport->tx_irq); | |
176 | ||
177 | if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) { | |
178 | dmaengine_pause(dma->tx_chan); | |
179 | dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state); | |
180 | dmaengine_terminate_all(dma->tx_chan); | |
181 | dma_sync_single_for_cpu(ourport->port.dev, | |
182 | dma->tx_transfer_addr, dma->tx_size, DMA_TO_DEVICE); | |
183 | async_tx_ack(dma->tx_desc); | |
184 | count = dma->tx_bytes_requested - state.residue; | |
185 | xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); | |
186 | port->icount.tx += count; | |
b497549a | 187 | } |
29bef799 RB |
188 | |
189 | tx_enabled(port) = 0; | |
190 | ourport->tx_in_progress = 0; | |
191 | ||
192 | if (port->flags & UPF_CONS_FLOW) | |
193 | s3c24xx_serial_rx_enable(port); | |
194 | ||
195 | ourport->tx_mode = 0; | |
196 | } | |
197 | ||
198 | static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport); | |
199 | ||
200 | static void s3c24xx_serial_tx_dma_complete(void *args) | |
201 | { | |
202 | struct s3c24xx_uart_port *ourport = args; | |
203 | struct uart_port *port = &ourport->port; | |
204 | struct circ_buf *xmit = &port->state->xmit; | |
205 | struct s3c24xx_uart_dma *dma = ourport->dma; | |
206 | struct dma_tx_state state; | |
207 | unsigned long flags; | |
208 | int count; | |
209 | ||
210 | ||
211 | dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state); | |
212 | count = dma->tx_bytes_requested - state.residue; | |
213 | async_tx_ack(dma->tx_desc); | |
214 | ||
215 | dma_sync_single_for_cpu(ourport->port.dev, dma->tx_transfer_addr, | |
216 | dma->tx_size, DMA_TO_DEVICE); | |
217 | ||
218 | spin_lock_irqsave(&port->lock, flags); | |
219 | ||
220 | xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); | |
221 | port->icount.tx += count; | |
222 | ourport->tx_in_progress = 0; | |
223 | ||
224 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
225 | uart_write_wakeup(port); | |
226 | ||
227 | s3c24xx_serial_start_next_tx(ourport); | |
228 | spin_unlock_irqrestore(&port->lock, flags); | |
229 | } | |
230 | ||
231 | static void enable_tx_dma(struct s3c24xx_uart_port *ourport) | |
232 | { | |
233 | struct uart_port *port = &ourport->port; | |
234 | u32 ucon; | |
235 | ||
236 | /* Mask Tx interrupt */ | |
237 | if (s3c24xx_serial_has_interrupt_mask(port)) | |
238 | __set_bit(S3C64XX_UINTM_TXD, | |
239 | portaddrl(port, S3C64XX_UINTM)); | |
240 | else | |
241 | disable_irq_nosync(ourport->tx_irq); | |
242 | ||
243 | /* Enable tx dma mode */ | |
244 | ucon = rd_regl(port, S3C2410_UCON); | |
245 | ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK); | |
246 | ucon |= (dma_get_cache_alignment() >= 16) ? | |
247 | S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1; | |
248 | ucon |= S3C64XX_UCON_TXMODE_DMA; | |
249 | wr_regl(port, S3C2410_UCON, ucon); | |
250 | ||
251 | ourport->tx_mode = S3C24XX_TX_DMA; | |
252 | } | |
253 | ||
254 | static void enable_tx_pio(struct s3c24xx_uart_port *ourport) | |
255 | { | |
256 | struct uart_port *port = &ourport->port; | |
257 | u32 ucon, ufcon; | |
258 | ||
259 | /* Set ufcon txtrig */ | |
260 | ourport->tx_in_progress = S3C24XX_TX_PIO; | |
261 | ufcon = rd_regl(port, S3C2410_UFCON); | |
262 | wr_regl(port, S3C2410_UFCON, ufcon); | |
263 | ||
264 | /* Enable tx pio mode */ | |
265 | ucon = rd_regl(port, S3C2410_UCON); | |
266 | ucon &= ~(S3C64XX_UCON_TXMODE_MASK); | |
267 | ucon |= S3C64XX_UCON_TXMODE_CPU; | |
268 | wr_regl(port, S3C2410_UCON, ucon); | |
269 | ||
270 | /* Unmask Tx interrupt */ | |
271 | if (s3c24xx_serial_has_interrupt_mask(port)) | |
272 | __clear_bit(S3C64XX_UINTM_TXD, | |
273 | portaddrl(port, S3C64XX_UINTM)); | |
274 | else | |
275 | enable_irq(ourport->tx_irq); | |
276 | ||
277 | ourport->tx_mode = S3C24XX_TX_PIO; | |
278 | } | |
279 | ||
280 | static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport) | |
281 | { | |
282 | if (ourport->tx_mode != S3C24XX_TX_PIO) | |
283 | enable_tx_pio(ourport); | |
b497549a BD |
284 | } |
285 | ||
29bef799 RB |
286 | static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport, |
287 | unsigned int count) | |
288 | { | |
289 | struct uart_port *port = &ourport->port; | |
290 | struct circ_buf *xmit = &port->state->xmit; | |
291 | struct s3c24xx_uart_dma *dma = ourport->dma; | |
292 | ||
293 | ||
294 | if (ourport->tx_mode != S3C24XX_TX_DMA) | |
295 | enable_tx_dma(ourport); | |
296 | ||
29bef799 RB |
297 | dma->tx_size = count & ~(dma_get_cache_alignment() - 1); |
298 | dma->tx_transfer_addr = dma->tx_addr + xmit->tail; | |
299 | ||
300 | dma_sync_single_for_device(ourport->port.dev, dma->tx_transfer_addr, | |
301 | dma->tx_size, DMA_TO_DEVICE); | |
302 | ||
303 | dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan, | |
304 | dma->tx_transfer_addr, dma->tx_size, | |
305 | DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); | |
306 | if (!dma->tx_desc) { | |
307 | dev_err(ourport->port.dev, "Unable to get desc for Tx\n"); | |
308 | return -EIO; | |
309 | } | |
310 | ||
311 | dma->tx_desc->callback = s3c24xx_serial_tx_dma_complete; | |
312 | dma->tx_desc->callback_param = ourport; | |
313 | dma->tx_bytes_requested = dma->tx_size; | |
314 | ||
315 | ourport->tx_in_progress = S3C24XX_TX_DMA; | |
316 | dma->tx_cookie = dmaengine_submit(dma->tx_desc); | |
317 | dma_async_issue_pending(dma->tx_chan); | |
318 | return 0; | |
319 | } | |
320 | ||
321 | static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport) | |
322 | { | |
323 | struct uart_port *port = &ourport->port; | |
324 | struct circ_buf *xmit = &port->state->xmit; | |
325 | unsigned long count; | |
326 | ||
327 | /* Get data size up to the end of buffer */ | |
328 | count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); | |
329 | ||
330 | if (!count) { | |
331 | s3c24xx_serial_stop_tx(port); | |
332 | return; | |
333 | } | |
334 | ||
81ccb2a6 | 335 | if (!ourport->dma || !ourport->dma->tx_chan || |
736cd79f RB |
336 | count < ourport->min_dma_size || |
337 | xmit->tail & (dma_get_cache_alignment() - 1)) | |
29bef799 RB |
338 | s3c24xx_serial_start_tx_pio(ourport); |
339 | else | |
340 | s3c24xx_serial_start_tx_dma(ourport, count); | |
341 | } | |
342 | ||
75781979 | 343 | static void s3c24xx_serial_start_tx(struct uart_port *port) |
b497549a | 344 | { |
b73c289c | 345 | struct s3c24xx_uart_port *ourport = to_ourport(port); |
29bef799 | 346 | struct circ_buf *xmit = &port->state->xmit; |
b73c289c | 347 | |
b497549a BD |
348 | if (!tx_enabled(port)) { |
349 | if (port->flags & UPF_CONS_FLOW) | |
350 | s3c24xx_serial_rx_disable(port); | |
351 | ||
b497549a | 352 | tx_enabled(port) = 1; |
ba019a3e | 353 | if (!ourport->dma || !ourport->dma->tx_chan) |
29bef799 | 354 | s3c24xx_serial_start_tx_pio(ourport); |
29bef799 RB |
355 | } |
356 | ||
357 | if (ourport->dma && ourport->dma->tx_chan) { | |
358 | if (!uart_circ_empty(xmit) && !ourport->tx_in_progress) | |
359 | s3c24xx_serial_start_next_tx(ourport); | |
b497549a BD |
360 | } |
361 | } | |
362 | ||
b543c301 RB |
363 | static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport, |
364 | struct tty_port *tty, int count) | |
365 | { | |
366 | struct s3c24xx_uart_dma *dma = ourport->dma; | |
367 | int copied; | |
368 | ||
369 | if (!count) | |
370 | return; | |
371 | ||
372 | dma_sync_single_for_cpu(ourport->port.dev, dma->rx_addr, | |
373 | dma->rx_size, DMA_FROM_DEVICE); | |
374 | ||
375 | ourport->port.icount.rx += count; | |
376 | if (!tty) { | |
377 | dev_err(ourport->port.dev, "No tty port\n"); | |
378 | return; | |
379 | } | |
380 | copied = tty_insert_flip_string(tty, | |
381 | ((unsigned char *)(ourport->dma->rx_buf)), count); | |
382 | if (copied != count) { | |
383 | WARN_ON(1); | |
384 | dev_err(ourport->port.dev, "RxData copy to tty layer failed\n"); | |
385 | } | |
386 | } | |
387 | ||
b497549a BD |
388 | static void s3c24xx_serial_stop_rx(struct uart_port *port) |
389 | { | |
b73c289c | 390 | struct s3c24xx_uart_port *ourport = to_ourport(port); |
b543c301 RB |
391 | struct s3c24xx_uart_dma *dma = ourport->dma; |
392 | struct tty_port *t = &port->state->port; | |
393 | struct dma_tx_state state; | |
394 | enum dma_status dma_status; | |
395 | unsigned int received; | |
b73c289c | 396 | |
b497549a BD |
397 | if (rx_enabled(port)) { |
398 | dbg("s3c24xx_serial_stop_rx: port=%p\n", port); | |
88bb4ea1 TA |
399 | if (s3c24xx_serial_has_interrupt_mask(port)) |
400 | __set_bit(S3C64XX_UINTM_RXD, | |
401 | portaddrl(port, S3C64XX_UINTM)); | |
402 | else | |
403 | disable_irq_nosync(ourport->rx_irq); | |
b497549a BD |
404 | rx_enabled(port) = 0; |
405 | } | |
b543c301 RB |
406 | if (dma && dma->rx_chan) { |
407 | dmaengine_pause(dma->tx_chan); | |
408 | dma_status = dmaengine_tx_status(dma->rx_chan, | |
409 | dma->rx_cookie, &state); | |
410 | if (dma_status == DMA_IN_PROGRESS || | |
411 | dma_status == DMA_PAUSED) { | |
412 | received = dma->rx_bytes_requested - state.residue; | |
413 | dmaengine_terminate_all(dma->rx_chan); | |
414 | s3c24xx_uart_copy_rx_to_tty(ourport, t, received); | |
415 | } | |
416 | } | |
b497549a BD |
417 | } |
418 | ||
ef4aca70 RB |
419 | static inline struct s3c24xx_uart_info |
420 | *s3c24xx_port_to_info(struct uart_port *port) | |
b497549a BD |
421 | { |
422 | return to_ourport(port)->info; | |
423 | } | |
424 | ||
ef4aca70 RB |
425 | static inline struct s3c2410_uartcfg |
426 | *s3c24xx_port_to_cfg(struct uart_port *port) | |
b497549a | 427 | { |
4d84e970 TA |
428 | struct s3c24xx_uart_port *ourport; |
429 | ||
b497549a BD |
430 | if (port->dev == NULL) |
431 | return NULL; | |
432 | ||
4d84e970 TA |
433 | ourport = container_of(port, struct s3c24xx_uart_port, port); |
434 | return ourport->cfg; | |
b497549a BD |
435 | } |
436 | ||
437 | static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, | |
438 | unsigned long ufstat) | |
439 | { | |
440 | struct s3c24xx_uart_info *info = ourport->info; | |
441 | ||
442 | if (ufstat & info->rx_fifofull) | |
da121506 | 443 | return ourport->port.fifosize; |
b497549a BD |
444 | |
445 | return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; | |
446 | } | |
447 | ||
b543c301 RB |
448 | static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport); |
449 | static void s3c24xx_serial_rx_dma_complete(void *args) | |
450 | { | |
451 | struct s3c24xx_uart_port *ourport = args; | |
452 | struct uart_port *port = &ourport->port; | |
453 | ||
454 | struct s3c24xx_uart_dma *dma = ourport->dma; | |
455 | struct tty_port *t = &port->state->port; | |
456 | struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); | |
457 | ||
458 | struct dma_tx_state state; | |
459 | unsigned long flags; | |
460 | int received; | |
461 | ||
462 | dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state); | |
463 | received = dma->rx_bytes_requested - state.residue; | |
464 | async_tx_ack(dma->rx_desc); | |
465 | ||
466 | spin_lock_irqsave(&port->lock, flags); | |
467 | ||
468 | if (received) | |
469 | s3c24xx_uart_copy_rx_to_tty(ourport, t, received); | |
470 | ||
471 | if (tty) { | |
472 | tty_flip_buffer_push(t); | |
473 | tty_kref_put(tty); | |
474 | } | |
475 | ||
476 | s3c64xx_start_rx_dma(ourport); | |
477 | ||
478 | spin_unlock_irqrestore(&port->lock, flags); | |
479 | } | |
480 | ||
481 | static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport) | |
482 | { | |
483 | struct s3c24xx_uart_dma *dma = ourport->dma; | |
484 | ||
485 | dma_sync_single_for_device(ourport->port.dev, dma->rx_addr, | |
486 | dma->rx_size, DMA_FROM_DEVICE); | |
487 | ||
488 | dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan, | |
489 | dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM, | |
490 | DMA_PREP_INTERRUPT); | |
491 | if (!dma->rx_desc) { | |
492 | dev_err(ourport->port.dev, "Unable to get desc for Rx\n"); | |
493 | return; | |
494 | } | |
495 | ||
496 | dma->rx_desc->callback = s3c24xx_serial_rx_dma_complete; | |
497 | dma->rx_desc->callback_param = ourport; | |
498 | dma->rx_bytes_requested = dma->rx_size; | |
499 | ||
500 | dma->rx_cookie = dmaengine_submit(dma->rx_desc); | |
501 | dma_async_issue_pending(dma->rx_chan); | |
502 | } | |
b497549a BD |
503 | |
504 | /* ? - where has parity gone?? */ | |
505 | #define S3C2410_UERSTAT_PARITY (0x1000) | |
506 | ||
b543c301 RB |
507 | static void enable_rx_dma(struct s3c24xx_uart_port *ourport) |
508 | { | |
509 | struct uart_port *port = &ourport->port; | |
510 | unsigned int ucon; | |
511 | ||
512 | /* set Rx mode to DMA mode */ | |
513 | ucon = rd_regl(port, S3C2410_UCON); | |
514 | ucon &= ~(S3C64XX_UCON_RXBURST_MASK | | |
515 | S3C64XX_UCON_TIMEOUT_MASK | | |
516 | S3C64XX_UCON_EMPTYINT_EN | | |
517 | S3C64XX_UCON_DMASUS_EN | | |
518 | S3C64XX_UCON_TIMEOUT_EN | | |
519 | S3C64XX_UCON_RXMODE_MASK); | |
520 | ucon |= S3C64XX_UCON_RXBURST_16 | | |
521 | 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | | |
522 | S3C64XX_UCON_EMPTYINT_EN | | |
523 | S3C64XX_UCON_TIMEOUT_EN | | |
524 | S3C64XX_UCON_RXMODE_DMA; | |
525 | wr_regl(port, S3C2410_UCON, ucon); | |
526 | ||
527 | ourport->rx_mode = S3C24XX_RX_DMA; | |
528 | } | |
529 | ||
530 | static void enable_rx_pio(struct s3c24xx_uart_port *ourport) | |
531 | { | |
532 | struct uart_port *port = &ourport->port; | |
533 | unsigned int ucon; | |
534 | ||
535 | /* set Rx mode to DMA mode */ | |
536 | ucon = rd_regl(port, S3C2410_UCON); | |
537 | ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK | | |
538 | S3C64XX_UCON_EMPTYINT_EN | | |
539 | S3C64XX_UCON_DMASUS_EN | | |
540 | S3C64XX_UCON_TIMEOUT_EN | | |
541 | S3C64XX_UCON_RXMODE_MASK); | |
542 | ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | | |
543 | S3C64XX_UCON_TIMEOUT_EN | | |
544 | S3C64XX_UCON_RXMODE_CPU; | |
545 | wr_regl(port, S3C2410_UCON, ucon); | |
546 | ||
547 | ourport->rx_mode = S3C24XX_RX_PIO; | |
548 | } | |
549 | ||
09557c01 RB |
550 | static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport); |
551 | ||
e4678afe | 552 | static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id) |
b543c301 RB |
553 | { |
554 | unsigned int utrstat, ufstat, received; | |
555 | struct s3c24xx_uart_port *ourport = dev_id; | |
556 | struct uart_port *port = &ourport->port; | |
557 | struct s3c24xx_uart_dma *dma = ourport->dma; | |
558 | struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); | |
559 | struct tty_port *t = &port->state->port; | |
560 | unsigned long flags; | |
561 | struct dma_tx_state state; | |
562 | ||
563 | utrstat = rd_regl(port, S3C2410_UTRSTAT); | |
564 | ufstat = rd_regl(port, S3C2410_UFSTAT); | |
565 | ||
566 | spin_lock_irqsave(&port->lock, flags); | |
567 | ||
568 | if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) { | |
569 | s3c64xx_start_rx_dma(ourport); | |
570 | if (ourport->rx_mode == S3C24XX_RX_PIO) | |
571 | enable_rx_dma(ourport); | |
572 | goto finish; | |
573 | } | |
574 | ||
575 | if (ourport->rx_mode == S3C24XX_RX_DMA) { | |
576 | dmaengine_pause(dma->rx_chan); | |
577 | dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state); | |
578 | dmaengine_terminate_all(dma->rx_chan); | |
579 | received = dma->rx_bytes_requested - state.residue; | |
580 | s3c24xx_uart_copy_rx_to_tty(ourport, t, received); | |
581 | ||
582 | enable_rx_pio(ourport); | |
583 | } | |
584 | ||
09557c01 | 585 | s3c24xx_serial_rx_drain_fifo(ourport); |
b543c301 RB |
586 | |
587 | if (tty) { | |
588 | tty_flip_buffer_push(t); | |
589 | tty_kref_put(tty); | |
590 | } | |
591 | ||
592 | wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT); | |
593 | ||
594 | finish: | |
595 | spin_unlock_irqrestore(&port->lock, flags); | |
596 | ||
597 | return IRQ_HANDLED; | |
598 | } | |
599 | ||
01732dd2 | 600 | static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport) |
b497549a | 601 | { |
b497549a | 602 | struct uart_port *port = &ourport->port; |
b497549a | 603 | unsigned int ufcon, ch, flag, ufstat, uerstat; |
57850a50 | 604 | int max_count = port->fifosize; |
b497549a BD |
605 | |
606 | while (max_count-- > 0) { | |
607 | ufcon = rd_regl(port, S3C2410_UFCON); | |
608 | ufstat = rd_regl(port, S3C2410_UFSTAT); | |
609 | ||
610 | if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0) | |
611 | break; | |
612 | ||
613 | uerstat = rd_regl(port, S3C2410_UERSTAT); | |
614 | ch = rd_regb(port, S3C2410_URXH); | |
615 | ||
616 | if (port->flags & UPF_CONS_FLOW) { | |
617 | int txe = s3c24xx_serial_txempty_nofifo(port); | |
618 | ||
619 | if (rx_enabled(port)) { | |
620 | if (!txe) { | |
621 | rx_enabled(port) = 0; | |
622 | continue; | |
623 | } | |
624 | } else { | |
625 | if (txe) { | |
626 | ufcon |= S3C2410_UFCON_RESETRX; | |
627 | wr_regl(port, S3C2410_UFCON, ufcon); | |
628 | rx_enabled(port) = 1; | |
01732dd2 | 629 | return; |
b497549a BD |
630 | } |
631 | continue; | |
632 | } | |
633 | } | |
634 | ||
635 | /* insert the character into the buffer */ | |
636 | ||
637 | flag = TTY_NORMAL; | |
638 | port->icount.rx++; | |
639 | ||
640 | if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) { | |
641 | dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n", | |
642 | ch, uerstat); | |
643 | ||
644 | /* check for break */ | |
645 | if (uerstat & S3C2410_UERSTAT_BREAK) { | |
646 | dbg("break!\n"); | |
647 | port->icount.brk++; | |
648 | if (uart_handle_break(port)) | |
620bb214 | 649 | continue; /* Ignore character */ |
b497549a BD |
650 | } |
651 | ||
652 | if (uerstat & S3C2410_UERSTAT_FRAME) | |
653 | port->icount.frame++; | |
654 | if (uerstat & S3C2410_UERSTAT_OVERRUN) | |
655 | port->icount.overrun++; | |
656 | ||
657 | uerstat &= port->read_status_mask; | |
658 | ||
659 | if (uerstat & S3C2410_UERSTAT_BREAK) | |
660 | flag = TTY_BREAK; | |
661 | else if (uerstat & S3C2410_UERSTAT_PARITY) | |
662 | flag = TTY_PARITY; | |
663 | else if (uerstat & (S3C2410_UERSTAT_FRAME | | |
664 | S3C2410_UERSTAT_OVERRUN)) | |
665 | flag = TTY_FRAME; | |
666 | } | |
667 | ||
668 | if (uart_handle_sysrq_char(port, ch)) | |
620bb214 | 669 | continue; /* Ignore character */ |
b497549a BD |
670 | |
671 | uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, | |
672 | ch, flag); | |
b497549a | 673 | } |
f5693ea2 | 674 | |
2e124b4a | 675 | tty_flip_buffer_push(&port->state->port); |
01732dd2 RB |
676 | } |
677 | ||
678 | static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id) | |
679 | { | |
680 | struct s3c24xx_uart_port *ourport = dev_id; | |
681 | struct uart_port *port = &ourport->port; | |
682 | unsigned long flags; | |
683 | ||
684 | spin_lock_irqsave(&port->lock, flags); | |
685 | s3c24xx_serial_rx_drain_fifo(ourport); | |
686 | spin_unlock_irqrestore(&port->lock, flags); | |
b497549a | 687 | |
b497549a BD |
688 | return IRQ_HANDLED; |
689 | } | |
690 | ||
b543c301 RB |
691 | |
692 | static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id) | |
693 | { | |
694 | struct s3c24xx_uart_port *ourport = dev_id; | |
695 | ||
696 | if (ourport->dma && ourport->dma->rx_chan) | |
e4678afe RB |
697 | return s3c24xx_serial_rx_chars_dma(dev_id); |
698 | return s3c24xx_serial_rx_chars_pio(dev_id); | |
b543c301 RB |
699 | } |
700 | ||
b497549a BD |
701 | static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) |
702 | { | |
703 | struct s3c24xx_uart_port *ourport = id; | |
704 | struct uart_port *port = &ourport->port; | |
ebd2c8f6 | 705 | struct circ_buf *xmit = &port->state->xmit; |
c15c3747 | 706 | unsigned long flags; |
736cd79f | 707 | int count, dma_count = 0; |
b497549a | 708 | |
c15c3747 TA |
709 | spin_lock_irqsave(&port->lock, flags); |
710 | ||
29bef799 RB |
711 | count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); |
712 | ||
81ccb2a6 MS |
713 | if (ourport->dma && ourport->dma->tx_chan && |
714 | count >= ourport->min_dma_size) { | |
736cd79f RB |
715 | int align = dma_get_cache_alignment() - |
716 | (xmit->tail & (dma_get_cache_alignment() - 1)); | |
717 | if (count-align >= ourport->min_dma_size) { | |
718 | dma_count = count-align; | |
719 | count = align; | |
720 | } | |
29bef799 RB |
721 | } |
722 | ||
b497549a BD |
723 | if (port->x_char) { |
724 | wr_regb(port, S3C2410_UTXH, port->x_char); | |
725 | port->icount.tx++; | |
726 | port->x_char = 0; | |
727 | goto out; | |
728 | } | |
729 | ||
25985edc | 730 | /* if there isn't anything more to transmit, or the uart is now |
b497549a BD |
731 | * stopped, disable the uart and exit |
732 | */ | |
733 | ||
734 | if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { | |
735 | s3c24xx_serial_stop_tx(port); | |
736 | goto out; | |
737 | } | |
738 | ||
739 | /* try and drain the buffer... */ | |
740 | ||
736cd79f RB |
741 | if (count > port->fifosize) { |
742 | count = port->fifosize; | |
743 | dma_count = 0; | |
744 | } | |
745 | ||
746 | while (!uart_circ_empty(xmit) && count > 0) { | |
b497549a BD |
747 | if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) |
748 | break; | |
749 | ||
750 | wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]); | |
751 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
752 | port->icount.tx++; | |
736cd79f RB |
753 | count--; |
754 | } | |
755 | ||
756 | if (!count && dma_count) { | |
757 | s3c24xx_serial_start_tx_dma(ourport, dma_count); | |
758 | goto out; | |
b497549a BD |
759 | } |
760 | ||
c15c3747 TA |
761 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) { |
762 | spin_unlock(&port->lock); | |
b497549a | 763 | uart_write_wakeup(port); |
c15c3747 TA |
764 | spin_lock(&port->lock); |
765 | } | |
b497549a BD |
766 | |
767 | if (uart_circ_empty(xmit)) | |
768 | s3c24xx_serial_stop_tx(port); | |
769 | ||
ef4aca70 | 770 | out: |
c15c3747 | 771 | spin_unlock_irqrestore(&port->lock, flags); |
b497549a BD |
772 | return IRQ_HANDLED; |
773 | } | |
774 | ||
88bb4ea1 TA |
775 | /* interrupt handler for s3c64xx and later SoC's.*/ |
776 | static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id) | |
777 | { | |
778 | struct s3c24xx_uart_port *ourport = id; | |
779 | struct uart_port *port = &ourport->port; | |
780 | unsigned int pend = rd_regl(port, S3C64XX_UINTP); | |
88bb4ea1 TA |
781 | irqreturn_t ret = IRQ_HANDLED; |
782 | ||
88bb4ea1 TA |
783 | if (pend & S3C64XX_UINTM_RXD_MSK) { |
784 | ret = s3c24xx_serial_rx_chars(irq, id); | |
785 | wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK); | |
786 | } | |
787 | if (pend & S3C64XX_UINTM_TXD_MSK) { | |
788 | ret = s3c24xx_serial_tx_chars(irq, id); | |
789 | wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK); | |
790 | } | |
88bb4ea1 TA |
791 | return ret; |
792 | } | |
793 | ||
b497549a BD |
794 | static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) |
795 | { | |
796 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
797 | unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT); | |
798 | unsigned long ufcon = rd_regl(port, S3C2410_UFCON); | |
799 | ||
800 | if (ufcon & S3C2410_UFCON_FIFOMODE) { | |
801 | if ((ufstat & info->tx_fifomask) != 0 || | |
802 | (ufstat & info->tx_fifofull)) | |
803 | return 0; | |
804 | ||
805 | return 1; | |
806 | } | |
807 | ||
808 | return s3c24xx_serial_txempty_nofifo(port); | |
809 | } | |
810 | ||
811 | /* no modem control lines */ | |
812 | static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) | |
813 | { | |
814 | unsigned int umstat = rd_regb(port, S3C2410_UMSTAT); | |
815 | ||
816 | if (umstat & S3C2410_UMSTAT_CTS) | |
817 | return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; | |
818 | else | |
819 | return TIOCM_CAR | TIOCM_DSR; | |
820 | } | |
821 | ||
822 | static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
823 | { | |
2d1e5a48 JMG |
824 | unsigned int umcon = rd_regl(port, S3C2410_UMCON); |
825 | ||
826 | if (mctrl & TIOCM_RTS) | |
827 | umcon |= S3C2410_UMCOM_RTS_LOW; | |
828 | else | |
829 | umcon &= ~S3C2410_UMCOM_RTS_LOW; | |
830 | ||
831 | wr_regl(port, S3C2410_UMCON, umcon); | |
b497549a BD |
832 | } |
833 | ||
834 | static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) | |
835 | { | |
836 | unsigned long flags; | |
837 | unsigned int ucon; | |
838 | ||
839 | spin_lock_irqsave(&port->lock, flags); | |
840 | ||
841 | ucon = rd_regl(port, S3C2410_UCON); | |
842 | ||
843 | if (break_state) | |
844 | ucon |= S3C2410_UCON_SBREAK; | |
845 | else | |
846 | ucon &= ~S3C2410_UCON_SBREAK; | |
847 | ||
848 | wr_regl(port, S3C2410_UCON, ucon); | |
849 | ||
850 | spin_unlock_irqrestore(&port->lock, flags); | |
851 | } | |
852 | ||
62c37eed RB |
853 | static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) |
854 | { | |
855 | struct s3c24xx_uart_dma *dma = p->dma; | |
856 | dma_cap_mask_t mask; | |
857 | unsigned long flags; | |
858 | ||
859 | /* Default slave configuration parameters */ | |
860 | dma->rx_conf.direction = DMA_DEV_TO_MEM; | |
861 | dma->rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; | |
862 | dma->rx_conf.src_addr = p->port.mapbase + S3C2410_URXH; | |
863 | dma->rx_conf.src_maxburst = 16; | |
864 | ||
865 | dma->tx_conf.direction = DMA_MEM_TO_DEV; | |
866 | dma->tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; | |
867 | dma->tx_conf.dst_addr = p->port.mapbase + S3C2410_UTXH; | |
868 | if (dma_get_cache_alignment() >= 16) | |
869 | dma->tx_conf.dst_maxburst = 16; | |
870 | else | |
871 | dma->tx_conf.dst_maxburst = 1; | |
872 | ||
873 | dma_cap_zero(mask); | |
874 | dma_cap_set(DMA_SLAVE, mask); | |
875 | ||
876 | dma->rx_chan = dma_request_slave_channel_compat(mask, dma->fn, | |
877 | dma->rx_param, p->port.dev, "rx"); | |
878 | if (!dma->rx_chan) | |
879 | return -ENODEV; | |
880 | ||
881 | dmaengine_slave_config(dma->rx_chan, &dma->rx_conf); | |
882 | ||
883 | dma->tx_chan = dma_request_slave_channel_compat(mask, dma->fn, | |
884 | dma->tx_param, p->port.dev, "tx"); | |
885 | if (!dma->tx_chan) { | |
886 | dma_release_channel(dma->rx_chan); | |
887 | return -ENODEV; | |
888 | } | |
889 | ||
890 | dmaengine_slave_config(dma->tx_chan, &dma->tx_conf); | |
891 | ||
892 | /* RX buffer */ | |
893 | dma->rx_size = PAGE_SIZE; | |
894 | ||
895 | dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL); | |
896 | ||
897 | if (!dma->rx_buf) { | |
898 | dma_release_channel(dma->rx_chan); | |
899 | dma_release_channel(dma->tx_chan); | |
900 | return -ENOMEM; | |
901 | } | |
902 | ||
903 | dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf, | |
904 | dma->rx_size, DMA_FROM_DEVICE); | |
905 | ||
906 | spin_lock_irqsave(&p->port.lock, flags); | |
907 | ||
908 | /* TX buffer */ | |
909 | dma->tx_addr = dma_map_single(dma->tx_chan->device->dev, | |
910 | p->port.state->xmit.buf, | |
911 | UART_XMIT_SIZE, DMA_TO_DEVICE); | |
912 | ||
913 | spin_unlock_irqrestore(&p->port.lock, flags); | |
914 | ||
915 | return 0; | |
916 | } | |
917 | ||
918 | static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) | |
919 | { | |
920 | struct s3c24xx_uart_dma *dma = p->dma; | |
921 | ||
922 | if (dma->rx_chan) { | |
923 | dmaengine_terminate_all(dma->rx_chan); | |
924 | dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr, | |
925 | dma->rx_size, DMA_FROM_DEVICE); | |
926 | kfree(dma->rx_buf); | |
927 | dma_release_channel(dma->rx_chan); | |
928 | dma->rx_chan = NULL; | |
929 | } | |
930 | ||
931 | if (dma->tx_chan) { | |
932 | dmaengine_terminate_all(dma->tx_chan); | |
933 | dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr, | |
934 | UART_XMIT_SIZE, DMA_TO_DEVICE); | |
935 | dma_release_channel(dma->tx_chan); | |
936 | dma->tx_chan = NULL; | |
937 | } | |
938 | } | |
939 | ||
b497549a BD |
940 | static void s3c24xx_serial_shutdown(struct uart_port *port) |
941 | { | |
942 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
943 | ||
944 | if (ourport->tx_claimed) { | |
88bb4ea1 TA |
945 | if (!s3c24xx_serial_has_interrupt_mask(port)) |
946 | free_irq(ourport->tx_irq, ourport); | |
b497549a BD |
947 | tx_enabled(port) = 0; |
948 | ourport->tx_claimed = 0; | |
e91d863d | 949 | ourport->tx_mode = 0; |
b497549a BD |
950 | } |
951 | ||
952 | if (ourport->rx_claimed) { | |
88bb4ea1 TA |
953 | if (!s3c24xx_serial_has_interrupt_mask(port)) |
954 | free_irq(ourport->rx_irq, ourport); | |
b497549a BD |
955 | ourport->rx_claimed = 0; |
956 | rx_enabled(port) = 0; | |
957 | } | |
b497549a | 958 | |
88bb4ea1 TA |
959 | /* Clear pending interrupts and mask all interrupts */ |
960 | if (s3c24xx_serial_has_interrupt_mask(port)) { | |
b6ad2935 TF |
961 | free_irq(port->irq, ourport); |
962 | ||
88bb4ea1 TA |
963 | wr_regl(port, S3C64XX_UINTP, 0xf); |
964 | wr_regl(port, S3C64XX_UINTM, 0xf); | |
965 | } | |
62c37eed RB |
966 | |
967 | if (ourport->dma) | |
968 | s3c24xx_serial_release_dma(ourport); | |
969 | ||
29bef799 | 970 | ourport->tx_in_progress = 0; |
88bb4ea1 | 971 | } |
b497549a BD |
972 | |
973 | static int s3c24xx_serial_startup(struct uart_port *port) | |
974 | { | |
975 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
976 | int ret; | |
977 | ||
e4ac92df JP |
978 | dbg("s3c24xx_serial_startup: port=%p (%08llx,%p)\n", |
979 | port, (unsigned long long)port->mapbase, port->membase); | |
b497549a BD |
980 | |
981 | rx_enabled(port) = 1; | |
982 | ||
b73c289c | 983 | ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0, |
b497549a BD |
984 | s3c24xx_serial_portname(port), ourport); |
985 | ||
986 | if (ret != 0) { | |
d20925e1 | 987 | dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq); |
b497549a BD |
988 | return ret; |
989 | } | |
990 | ||
991 | ourport->rx_claimed = 1; | |
992 | ||
993 | dbg("requesting tx irq...\n"); | |
994 | ||
995 | tx_enabled(port) = 1; | |
996 | ||
b73c289c | 997 | ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0, |
b497549a BD |
998 | s3c24xx_serial_portname(port), ourport); |
999 | ||
1000 | if (ret) { | |
d20925e1 | 1001 | dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq); |
b497549a BD |
1002 | goto err; |
1003 | } | |
1004 | ||
1005 | ourport->tx_claimed = 1; | |
1006 | ||
1007 | dbg("s3c24xx_serial_startup ok\n"); | |
1008 | ||
1009 | /* the port reset code should have done the correct | |
1010 | * register setup for the port controls */ | |
1011 | ||
1012 | return ret; | |
1013 | ||
ef4aca70 | 1014 | err: |
b497549a BD |
1015 | s3c24xx_serial_shutdown(port); |
1016 | return ret; | |
1017 | } | |
1018 | ||
88bb4ea1 TA |
1019 | static int s3c64xx_serial_startup(struct uart_port *port) |
1020 | { | |
1021 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
b543c301 RB |
1022 | unsigned long flags; |
1023 | unsigned int ufcon; | |
88bb4ea1 TA |
1024 | int ret; |
1025 | ||
e4ac92df JP |
1026 | dbg("s3c64xx_serial_startup: port=%p (%08llx,%p)\n", |
1027 | port, (unsigned long long)port->mapbase, port->membase); | |
88bb4ea1 | 1028 | |
b6ad2935 | 1029 | wr_regl(port, S3C64XX_UINTM, 0xf); |
62c37eed RB |
1030 | if (ourport->dma) { |
1031 | ret = s3c24xx_serial_request_dma(ourport); | |
1032 | if (ret < 0) { | |
1033 | dev_warn(port->dev, "DMA request failed\n"); | |
1034 | return ret; | |
1035 | } | |
1036 | } | |
b6ad2935 | 1037 | |
88bb4ea1 TA |
1038 | ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED, |
1039 | s3c24xx_serial_portname(port), ourport); | |
1040 | if (ret) { | |
d20925e1 | 1041 | dev_err(port->dev, "cannot get irq %d\n", port->irq); |
88bb4ea1 TA |
1042 | return ret; |
1043 | } | |
1044 | ||
1045 | /* For compatibility with s3c24xx Soc's */ | |
1046 | rx_enabled(port) = 1; | |
1047 | ourport->rx_claimed = 1; | |
1048 | tx_enabled(port) = 0; | |
1049 | ourport->tx_claimed = 1; | |
1050 | ||
29bef799 RB |
1051 | spin_lock_irqsave(&port->lock, flags); |
1052 | ||
1053 | ufcon = rd_regl(port, S3C2410_UFCON); | |
31c6ba97 RB |
1054 | ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8; |
1055 | if (!uart_console(port)) | |
1056 | ufcon |= S3C2410_UFCON_RESETTX; | |
29bef799 RB |
1057 | wr_regl(port, S3C2410_UFCON, ufcon); |
1058 | ||
1059 | enable_rx_pio(ourport); | |
1060 | ||
1061 | spin_unlock_irqrestore(&port->lock, flags); | |
1062 | ||
88bb4ea1 TA |
1063 | /* Enable Rx Interrupt */ |
1064 | __clear_bit(S3C64XX_UINTM_RXD, portaddrl(port, S3C64XX_UINTM)); | |
29bef799 | 1065 | |
88bb4ea1 TA |
1066 | dbg("s3c64xx_serial_startup ok\n"); |
1067 | return ret; | |
1068 | } | |
1069 | ||
b497549a BD |
1070 | /* power power management control */ |
1071 | ||
1072 | static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, | |
1073 | unsigned int old) | |
1074 | { | |
1075 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
1ff383a4 | 1076 | int timeout = 10000; |
b497549a | 1077 | |
30555476 BD |
1078 | ourport->pm_level = level; |
1079 | ||
b497549a BD |
1080 | switch (level) { |
1081 | case 3: | |
1ff383a4 RB |
1082 | while (--timeout && !s3c24xx_serial_txempty_nofifo(port)) |
1083 | udelay(100); | |
1084 | ||
7cd88831 | 1085 | if (!IS_ERR(ourport->baudclk)) |
9484b009 | 1086 | clk_disable_unprepare(ourport->baudclk); |
b497549a | 1087 | |
9484b009 | 1088 | clk_disable_unprepare(ourport->clk); |
b497549a BD |
1089 | break; |
1090 | ||
1091 | case 0: | |
9484b009 | 1092 | clk_prepare_enable(ourport->clk); |
b497549a | 1093 | |
7cd88831 | 1094 | if (!IS_ERR(ourport->baudclk)) |
9484b009 | 1095 | clk_prepare_enable(ourport->baudclk); |
b497549a BD |
1096 | |
1097 | break; | |
1098 | default: | |
d20925e1 | 1099 | dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level); |
b497549a BD |
1100 | } |
1101 | } | |
1102 | ||
1103 | /* baud rate calculation | |
1104 | * | |
1105 | * The UARTs on the S3C2410/S3C2440 can take their clocks from a number | |
1106 | * of different sources, including the peripheral clock ("pclk") and an | |
1107 | * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk") | |
1108 | * with a programmable extra divisor. | |
1109 | * | |
1110 | * The following code goes through the clock sources, and calculates the | |
1111 | * baud clocks (and the resultant actual baud rates) and then tries to | |
1112 | * pick the closest one and select that. | |
1113 | * | |
1114 | */ | |
1115 | ||
5f5a7a55 | 1116 | #define MAX_CLK_NAME_LENGTH 15 |
b497549a | 1117 | |
5f5a7a55 | 1118 | static inline int s3c24xx_serial_getsource(struct uart_port *port) |
b497549a BD |
1119 | { |
1120 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
5f5a7a55 | 1121 | unsigned int ucon; |
b497549a | 1122 | |
5f5a7a55 TA |
1123 | if (info->num_clks == 1) |
1124 | return 0; | |
b497549a | 1125 | |
5f5a7a55 TA |
1126 | ucon = rd_regl(port, S3C2410_UCON); |
1127 | ucon &= info->clksel_mask; | |
1128 | return ucon >> info->clksel_shift; | |
b497549a BD |
1129 | } |
1130 | ||
5f5a7a55 TA |
1131 | static void s3c24xx_serial_setsource(struct uart_port *port, |
1132 | unsigned int clk_sel) | |
b497549a | 1133 | { |
5f5a7a55 TA |
1134 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); |
1135 | unsigned int ucon; | |
b497549a | 1136 | |
5f5a7a55 TA |
1137 | if (info->num_clks == 1) |
1138 | return; | |
090f848d | 1139 | |
5f5a7a55 TA |
1140 | ucon = rd_regl(port, S3C2410_UCON); |
1141 | if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel) | |
1142 | return; | |
b497549a | 1143 | |
5f5a7a55 TA |
1144 | ucon &= ~info->clksel_mask; |
1145 | ucon |= clk_sel << info->clksel_shift; | |
1146 | wr_regl(port, S3C2410_UCON, ucon); | |
b497549a BD |
1147 | } |
1148 | ||
5f5a7a55 TA |
1149 | static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, |
1150 | unsigned int req_baud, struct clk **best_clk, | |
1151 | unsigned int *clk_num) | |
b497549a | 1152 | { |
5f5a7a55 TA |
1153 | struct s3c24xx_uart_info *info = ourport->info; |
1154 | struct clk *clk; | |
1155 | unsigned long rate; | |
1156 | unsigned int cnt, baud, quot, clk_sel, best_quot = 0; | |
1157 | char clkname[MAX_CLK_NAME_LENGTH]; | |
1158 | int calc_deviation, deviation = (1 << 30) - 1; | |
1159 | ||
5f5a7a55 TA |
1160 | clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel : |
1161 | ourport->info->def_clk_sel; | |
1162 | for (cnt = 0; cnt < info->num_clks; cnt++) { | |
1163 | if (!(clk_sel & (1 << cnt))) | |
1164 | continue; | |
1165 | ||
1166 | sprintf(clkname, "clk_uart_baud%d", cnt); | |
1167 | clk = clk_get(ourport->port.dev, clkname); | |
7cd88831 | 1168 | if (IS_ERR(clk)) |
5f5a7a55 TA |
1169 | continue; |
1170 | ||
1171 | rate = clk_get_rate(clk); | |
1172 | if (!rate) | |
1173 | continue; | |
1174 | ||
1175 | if (ourport->info->has_divslot) { | |
1176 | unsigned long div = rate / req_baud; | |
1177 | ||
1178 | /* The UDIVSLOT register on the newer UARTs allows us to | |
1179 | * get a divisor adjustment of 1/16th on the baud clock. | |
1180 | * | |
1181 | * We don't keep the UDIVSLOT value (the 16ths we | |
1182 | * calculated by not multiplying the baud by 16) as it | |
1183 | * is easy enough to recalculate. | |
1184 | */ | |
1185 | ||
1186 | quot = div / 16; | |
1187 | baud = rate / div; | |
1188 | } else { | |
1189 | quot = (rate + (8 * req_baud)) / (16 * req_baud); | |
1190 | baud = rate / (quot * 16); | |
b497549a | 1191 | } |
5f5a7a55 | 1192 | quot--; |
b497549a | 1193 | |
5f5a7a55 TA |
1194 | calc_deviation = req_baud - baud; |
1195 | if (calc_deviation < 0) | |
1196 | calc_deviation = -calc_deviation; | |
b497549a | 1197 | |
5f5a7a55 TA |
1198 | if (calc_deviation < deviation) { |
1199 | *best_clk = clk; | |
1200 | best_quot = quot; | |
1201 | *clk_num = cnt; | |
1202 | deviation = calc_deviation; | |
b497549a BD |
1203 | } |
1204 | } | |
1205 | ||
5f5a7a55 | 1206 | return best_quot; |
b497549a BD |
1207 | } |
1208 | ||
090f848d BD |
1209 | /* udivslot_table[] |
1210 | * | |
1211 | * This table takes the fractional value of the baud divisor and gives | |
1212 | * the recommended setting for the UDIVSLOT register. | |
1213 | */ | |
1214 | static u16 udivslot_table[16] = { | |
1215 | [0] = 0x0000, | |
1216 | [1] = 0x0080, | |
1217 | [2] = 0x0808, | |
1218 | [3] = 0x0888, | |
1219 | [4] = 0x2222, | |
1220 | [5] = 0x4924, | |
1221 | [6] = 0x4A52, | |
1222 | [7] = 0x54AA, | |
1223 | [8] = 0x5555, | |
1224 | [9] = 0xD555, | |
1225 | [10] = 0xD5D5, | |
1226 | [11] = 0xDDD5, | |
1227 | [12] = 0xDDDD, | |
1228 | [13] = 0xDFDD, | |
1229 | [14] = 0xDFDF, | |
1230 | [15] = 0xFFDF, | |
1231 | }; | |
1232 | ||
b497549a BD |
1233 | static void s3c24xx_serial_set_termios(struct uart_port *port, |
1234 | struct ktermios *termios, | |
1235 | struct ktermios *old) | |
1236 | { | |
1237 | struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); | |
1238 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
7cd88831 | 1239 | struct clk *clk = ERR_PTR(-EINVAL); |
b497549a | 1240 | unsigned long flags; |
5f5a7a55 | 1241 | unsigned int baud, quot, clk_sel = 0; |
b497549a BD |
1242 | unsigned int ulcon; |
1243 | unsigned int umcon; | |
090f848d | 1244 | unsigned int udivslot = 0; |
b497549a BD |
1245 | |
1246 | /* | |
1247 | * We don't support modem control lines. | |
1248 | */ | |
1249 | termios->c_cflag &= ~(HUPCL | CMSPAR); | |
1250 | termios->c_cflag |= CLOCAL; | |
1251 | ||
1252 | /* | |
1253 | * Ask the core to calculate the divisor for us. | |
1254 | */ | |
1255 | ||
1256 | baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); | |
5f5a7a55 | 1257 | quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel); |
b497549a BD |
1258 | if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) |
1259 | quot = port->custom_divisor; | |
7cd88831 | 1260 | if (IS_ERR(clk)) |
5f5a7a55 | 1261 | return; |
b497549a BD |
1262 | |
1263 | /* check to see if we need to change clock source */ | |
1264 | ||
5f5a7a55 TA |
1265 | if (ourport->baudclk != clk) { |
1266 | s3c24xx_serial_setsource(port, clk_sel); | |
b497549a | 1267 | |
7cd88831 | 1268 | if (!IS_ERR(ourport->baudclk)) { |
9484b009 | 1269 | clk_disable_unprepare(ourport->baudclk); |
7cd88831 | 1270 | ourport->baudclk = ERR_PTR(-EINVAL); |
b497549a BD |
1271 | } |
1272 | ||
9484b009 | 1273 | clk_prepare_enable(clk); |
b497549a | 1274 | |
b497549a | 1275 | ourport->baudclk = clk; |
30555476 | 1276 | ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; |
b497549a BD |
1277 | } |
1278 | ||
090f848d BD |
1279 | if (ourport->info->has_divslot) { |
1280 | unsigned int div = ourport->baudclk_rate / baud; | |
1281 | ||
8b526ae4 JL |
1282 | if (cfg->has_fracval) { |
1283 | udivslot = (div & 15); | |
1284 | dbg("fracval = %04x\n", udivslot); | |
1285 | } else { | |
1286 | udivslot = udivslot_table[div & 15]; | |
1287 | dbg("udivslot = %04x (div %d)\n", udivslot, div & 15); | |
1288 | } | |
090f848d BD |
1289 | } |
1290 | ||
b497549a BD |
1291 | switch (termios->c_cflag & CSIZE) { |
1292 | case CS5: | |
1293 | dbg("config: 5bits/char\n"); | |
1294 | ulcon = S3C2410_LCON_CS5; | |
1295 | break; | |
1296 | case CS6: | |
1297 | dbg("config: 6bits/char\n"); | |
1298 | ulcon = S3C2410_LCON_CS6; | |
1299 | break; | |
1300 | case CS7: | |
1301 | dbg("config: 7bits/char\n"); | |
1302 | ulcon = S3C2410_LCON_CS7; | |
1303 | break; | |
1304 | case CS8: | |
1305 | default: | |
1306 | dbg("config: 8bits/char\n"); | |
1307 | ulcon = S3C2410_LCON_CS8; | |
1308 | break; | |
1309 | } | |
1310 | ||
1311 | /* preserve original lcon IR settings */ | |
1312 | ulcon |= (cfg->ulcon & S3C2410_LCON_IRM); | |
1313 | ||
1314 | if (termios->c_cflag & CSTOPB) | |
1315 | ulcon |= S3C2410_LCON_STOPB; | |
1316 | ||
b497549a BD |
1317 | if (termios->c_cflag & PARENB) { |
1318 | if (termios->c_cflag & PARODD) | |
1319 | ulcon |= S3C2410_LCON_PODD; | |
1320 | else | |
1321 | ulcon |= S3C2410_LCON_PEVEN; | |
1322 | } else { | |
1323 | ulcon |= S3C2410_LCON_PNONE; | |
1324 | } | |
1325 | ||
1326 | spin_lock_irqsave(&port->lock, flags); | |
1327 | ||
090f848d BD |
1328 | dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n", |
1329 | ulcon, quot, udivslot); | |
b497549a BD |
1330 | |
1331 | wr_regl(port, S3C2410_ULCON, ulcon); | |
1332 | wr_regl(port, S3C2410_UBRDIV, quot); | |
2d1e5a48 JMG |
1333 | |
1334 | umcon = rd_regl(port, S3C2410_UMCON); | |
1335 | if (termios->c_cflag & CRTSCTS) { | |
1336 | umcon |= S3C2410_UMCOM_AFC; | |
1337 | /* Disable RTS when RX FIFO contains 63 bytes */ | |
1338 | umcon &= ~S3C2412_UMCON_AFC_8; | |
1339 | } else { | |
1340 | umcon &= ~S3C2410_UMCOM_AFC; | |
1341 | } | |
b497549a BD |
1342 | wr_regl(port, S3C2410_UMCON, umcon); |
1343 | ||
090f848d BD |
1344 | if (ourport->info->has_divslot) |
1345 | wr_regl(port, S3C2443_DIVSLOT, udivslot); | |
1346 | ||
b497549a BD |
1347 | dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", |
1348 | rd_regl(port, S3C2410_ULCON), | |
1349 | rd_regl(port, S3C2410_UCON), | |
1350 | rd_regl(port, S3C2410_UFCON)); | |
1351 | ||
1352 | /* | |
1353 | * Update the per-port timeout. | |
1354 | */ | |
1355 | uart_update_timeout(port, termios->c_cflag, baud); | |
1356 | ||
1357 | /* | |
1358 | * Which character status flags are we interested in? | |
1359 | */ | |
1360 | port->read_status_mask = S3C2410_UERSTAT_OVERRUN; | |
1361 | if (termios->c_iflag & INPCK) | |
ef4aca70 RB |
1362 | port->read_status_mask |= S3C2410_UERSTAT_FRAME | |
1363 | S3C2410_UERSTAT_PARITY; | |
b497549a BD |
1364 | /* |
1365 | * Which character status flags should we ignore? | |
1366 | */ | |
1367 | port->ignore_status_mask = 0; | |
1368 | if (termios->c_iflag & IGNPAR) | |
1369 | port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN; | |
1370 | if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) | |
1371 | port->ignore_status_mask |= S3C2410_UERSTAT_FRAME; | |
1372 | ||
1373 | /* | |
1374 | * Ignore all characters if CREAD is not set. | |
1375 | */ | |
1376 | if ((termios->c_cflag & CREAD) == 0) | |
1377 | port->ignore_status_mask |= RXSTAT_DUMMY_READ; | |
1378 | ||
1379 | spin_unlock_irqrestore(&port->lock, flags); | |
1380 | } | |
1381 | ||
1382 | static const char *s3c24xx_serial_type(struct uart_port *port) | |
1383 | { | |
1384 | switch (port->type) { | |
1385 | case PORT_S3C2410: | |
1386 | return "S3C2410"; | |
1387 | case PORT_S3C2440: | |
1388 | return "S3C2440"; | |
1389 | case PORT_S3C2412: | |
1390 | return "S3C2412"; | |
b690ace5 BD |
1391 | case PORT_S3C6400: |
1392 | return "S3C6400/10"; | |
b497549a BD |
1393 | default: |
1394 | return NULL; | |
1395 | } | |
1396 | } | |
1397 | ||
1398 | #define MAP_SIZE (0x100) | |
1399 | ||
1400 | static void s3c24xx_serial_release_port(struct uart_port *port) | |
1401 | { | |
1402 | release_mem_region(port->mapbase, MAP_SIZE); | |
1403 | } | |
1404 | ||
1405 | static int s3c24xx_serial_request_port(struct uart_port *port) | |
1406 | { | |
1407 | const char *name = s3c24xx_serial_portname(port); | |
1408 | return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY; | |
1409 | } | |
1410 | ||
1411 | static void s3c24xx_serial_config_port(struct uart_port *port, int flags) | |
1412 | { | |
1413 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
1414 | ||
1415 | if (flags & UART_CONFIG_TYPE && | |
1416 | s3c24xx_serial_request_port(port) == 0) | |
1417 | port->type = info->type; | |
1418 | } | |
1419 | ||
1420 | /* | |
1421 | * verify the new serial_struct (for TIOCSSERIAL). | |
1422 | */ | |
1423 | static int | |
1424 | s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) | |
1425 | { | |
1426 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
1427 | ||
1428 | if (ser->type != PORT_UNKNOWN && ser->type != info->type) | |
1429 | return -EINVAL; | |
1430 | ||
1431 | return 0; | |
1432 | } | |
1433 | ||
1434 | ||
1435 | #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE | |
1436 | ||
1437 | static struct console s3c24xx_serial_console; | |
1438 | ||
93b5c032 JP |
1439 | static int __init s3c24xx_serial_console_init(void) |
1440 | { | |
1441 | register_console(&s3c24xx_serial_console); | |
1442 | return 0; | |
1443 | } | |
1444 | console_initcall(s3c24xx_serial_console_init); | |
1445 | ||
b497549a BD |
1446 | #define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console |
1447 | #else | |
1448 | #define S3C24XX_SERIAL_CONSOLE NULL | |
1449 | #endif | |
1450 | ||
84f57d9e | 1451 | #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) |
93b5c032 JP |
1452 | static int s3c24xx_serial_get_poll_char(struct uart_port *port); |
1453 | static void s3c24xx_serial_put_poll_char(struct uart_port *port, | |
1454 | unsigned char c); | |
1455 | #endif | |
1456 | ||
b497549a BD |
1457 | static struct uart_ops s3c24xx_serial_ops = { |
1458 | .pm = s3c24xx_serial_pm, | |
1459 | .tx_empty = s3c24xx_serial_tx_empty, | |
1460 | .get_mctrl = s3c24xx_serial_get_mctrl, | |
1461 | .set_mctrl = s3c24xx_serial_set_mctrl, | |
1462 | .stop_tx = s3c24xx_serial_stop_tx, | |
1463 | .start_tx = s3c24xx_serial_start_tx, | |
1464 | .stop_rx = s3c24xx_serial_stop_rx, | |
b497549a BD |
1465 | .break_ctl = s3c24xx_serial_break_ctl, |
1466 | .startup = s3c24xx_serial_startup, | |
1467 | .shutdown = s3c24xx_serial_shutdown, | |
1468 | .set_termios = s3c24xx_serial_set_termios, | |
1469 | .type = s3c24xx_serial_type, | |
1470 | .release_port = s3c24xx_serial_release_port, | |
1471 | .request_port = s3c24xx_serial_request_port, | |
1472 | .config_port = s3c24xx_serial_config_port, | |
1473 | .verify_port = s3c24xx_serial_verify_port, | |
84f57d9e | 1474 | #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) |
93b5c032 JP |
1475 | .poll_get_char = s3c24xx_serial_get_poll_char, |
1476 | .poll_put_char = s3c24xx_serial_put_poll_char, | |
1477 | #endif | |
b497549a BD |
1478 | }; |
1479 | ||
b497549a BD |
1480 | static struct uart_driver s3c24xx_uart_drv = { |
1481 | .owner = THIS_MODULE, | |
2cf0c58e | 1482 | .driver_name = "s3c2410_serial", |
bdd4915a | 1483 | .nr = CONFIG_SERIAL_SAMSUNG_UARTS, |
b497549a | 1484 | .cons = S3C24XX_SERIAL_CONSOLE, |
2cf0c58e | 1485 | .dev_name = S3C24XX_SERIAL_NAME, |
b497549a BD |
1486 | .major = S3C24XX_SERIAL_MAJOR, |
1487 | .minor = S3C24XX_SERIAL_MINOR, | |
1488 | }; | |
1489 | ||
ef4aca70 RB |
1490 | #define __PORT_LOCK_UNLOCKED(i) \ |
1491 | __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[i].port.lock) | |
1492 | static struct s3c24xx_uart_port | |
1493 | s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = { | |
b497549a BD |
1494 | [0] = { |
1495 | .port = { | |
ef4aca70 | 1496 | .lock = __PORT_LOCK_UNLOCKED(0), |
b497549a | 1497 | .iotype = UPIO_MEM, |
b497549a BD |
1498 | .uartclk = 0, |
1499 | .fifosize = 16, | |
1500 | .ops = &s3c24xx_serial_ops, | |
1501 | .flags = UPF_BOOT_AUTOCONF, | |
1502 | .line = 0, | |
1503 | } | |
1504 | }, | |
1505 | [1] = { | |
1506 | .port = { | |
ef4aca70 | 1507 | .lock = __PORT_LOCK_UNLOCKED(1), |
b497549a | 1508 | .iotype = UPIO_MEM, |
b497549a BD |
1509 | .uartclk = 0, |
1510 | .fifosize = 16, | |
1511 | .ops = &s3c24xx_serial_ops, | |
1512 | .flags = UPF_BOOT_AUTOCONF, | |
1513 | .line = 1, | |
1514 | } | |
1515 | }, | |
03d5e77b | 1516 | #if CONFIG_SERIAL_SAMSUNG_UARTS > 2 |
b497549a BD |
1517 | |
1518 | [2] = { | |
1519 | .port = { | |
ef4aca70 | 1520 | .lock = __PORT_LOCK_UNLOCKED(2), |
b497549a | 1521 | .iotype = UPIO_MEM, |
b497549a BD |
1522 | .uartclk = 0, |
1523 | .fifosize = 16, | |
1524 | .ops = &s3c24xx_serial_ops, | |
1525 | .flags = UPF_BOOT_AUTOCONF, | |
1526 | .line = 2, | |
1527 | } | |
03d5e77b BD |
1528 | }, |
1529 | #endif | |
1530 | #if CONFIG_SERIAL_SAMSUNG_UARTS > 3 | |
1531 | [3] = { | |
1532 | .port = { | |
ef4aca70 | 1533 | .lock = __PORT_LOCK_UNLOCKED(3), |
03d5e77b | 1534 | .iotype = UPIO_MEM, |
03d5e77b BD |
1535 | .uartclk = 0, |
1536 | .fifosize = 16, | |
1537 | .ops = &s3c24xx_serial_ops, | |
1538 | .flags = UPF_BOOT_AUTOCONF, | |
1539 | .line = 3, | |
1540 | } | |
b497549a BD |
1541 | } |
1542 | #endif | |
1543 | }; | |
ef4aca70 | 1544 | #undef __PORT_LOCK_UNLOCKED |
b497549a BD |
1545 | |
1546 | /* s3c24xx_serial_resetport | |
1547 | * | |
0dfb3b41 | 1548 | * reset the fifos and other the settings. |
b497549a BD |
1549 | */ |
1550 | ||
0dfb3b41 TA |
1551 | static void s3c24xx_serial_resetport(struct uart_port *port, |
1552 | struct s3c2410_uartcfg *cfg) | |
b497549a BD |
1553 | { |
1554 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
0dfb3b41 TA |
1555 | unsigned long ucon = rd_regl(port, S3C2410_UCON); |
1556 | unsigned int ucon_mask; | |
b497549a | 1557 | |
0dfb3b41 TA |
1558 | ucon_mask = info->clksel_mask; |
1559 | if (info->type == PORT_S3C2440) | |
1560 | ucon_mask |= S3C2440_UCON0_DIVMASK; | |
1561 | ||
1562 | ucon &= ucon_mask; | |
1563 | wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); | |
1564 | ||
1565 | /* reset both fifos */ | |
1566 | wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); | |
1567 | wr_regl(port, S3C2410_UFCON, cfg->ufcon); | |
1568 | ||
1569 | /* some delay is required after fifo reset */ | |
1570 | udelay(1); | |
b497549a BD |
1571 | } |
1572 | ||
30555476 BD |
1573 | |
1574 | #ifdef CONFIG_CPU_FREQ | |
1575 | ||
1576 | static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, | |
1577 | unsigned long val, void *data) | |
1578 | { | |
1579 | struct s3c24xx_uart_port *port; | |
1580 | struct uart_port *uport; | |
1581 | ||
1582 | port = container_of(nb, struct s3c24xx_uart_port, freq_transition); | |
1583 | uport = &port->port; | |
1584 | ||
1585 | /* check to see if port is enabled */ | |
1586 | ||
1587 | if (port->pm_level != 0) | |
1588 | return 0; | |
1589 | ||
1590 | /* try and work out if the baudrate is changing, we can detect | |
1591 | * a change in rate, but we do not have support for detecting | |
1592 | * a disturbance in the clock-rate over the change. | |
1593 | */ | |
1594 | ||
25f04ad4 | 1595 | if (IS_ERR(port->baudclk)) |
30555476 BD |
1596 | goto exit; |
1597 | ||
25f04ad4 | 1598 | if (port->baudclk_rate == clk_get_rate(port->baudclk)) |
30555476 BD |
1599 | goto exit; |
1600 | ||
1601 | if (val == CPUFREQ_PRECHANGE) { | |
1602 | /* we should really shut the port down whilst the | |
1603 | * frequency change is in progress. */ | |
1604 | ||
1605 | } else if (val == CPUFREQ_POSTCHANGE) { | |
1606 | struct ktermios *termios; | |
1607 | struct tty_struct *tty; | |
1608 | ||
ebd2c8f6 | 1609 | if (uport->state == NULL) |
30555476 | 1610 | goto exit; |
30555476 | 1611 | |
ebd2c8f6 | 1612 | tty = uport->state->port.tty; |
30555476 | 1613 | |
7de40c21 | 1614 | if (tty == NULL) |
30555476 | 1615 | goto exit; |
30555476 | 1616 | |
adc8d746 | 1617 | termios = &tty->termios; |
30555476 BD |
1618 | |
1619 | if (termios == NULL) { | |
d20925e1 | 1620 | dev_warn(uport->dev, "%s: no termios?\n", __func__); |
30555476 BD |
1621 | goto exit; |
1622 | } | |
1623 | ||
1624 | s3c24xx_serial_set_termios(uport, termios, NULL); | |
1625 | } | |
1626 | ||
ef4aca70 | 1627 | exit: |
30555476 BD |
1628 | return 0; |
1629 | } | |
1630 | ||
ef4aca70 RB |
1631 | static inline int |
1632 | s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) | |
30555476 BD |
1633 | { |
1634 | port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition; | |
1635 | ||
1636 | return cpufreq_register_notifier(&port->freq_transition, | |
1637 | CPUFREQ_TRANSITION_NOTIFIER); | |
1638 | } | |
1639 | ||
ef4aca70 RB |
1640 | static inline void |
1641 | s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) | |
30555476 BD |
1642 | { |
1643 | cpufreq_unregister_notifier(&port->freq_transition, | |
1644 | CPUFREQ_TRANSITION_NOTIFIER); | |
1645 | } | |
1646 | ||
1647 | #else | |
ef4aca70 RB |
1648 | static inline int |
1649 | s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) | |
30555476 BD |
1650 | { |
1651 | return 0; | |
1652 | } | |
1653 | ||
ef4aca70 RB |
1654 | static inline void |
1655 | s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) | |
30555476 BD |
1656 | { |
1657 | } | |
1658 | #endif | |
1659 | ||
b497549a BD |
1660 | /* s3c24xx_serial_init_port |
1661 | * | |
1662 | * initialise a single serial port from the platform device given | |
1663 | */ | |
1664 | ||
1665 | static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, | |
b497549a BD |
1666 | struct platform_device *platdev) |
1667 | { | |
1668 | struct uart_port *port = &ourport->port; | |
da121506 | 1669 | struct s3c2410_uartcfg *cfg = ourport->cfg; |
b497549a BD |
1670 | struct resource *res; |
1671 | int ret; | |
1672 | ||
1673 | dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev); | |
1674 | ||
1675 | if (platdev == NULL) | |
1676 | return -ENODEV; | |
1677 | ||
b497549a BD |
1678 | if (port->mapbase != 0) |
1679 | return 0; | |
1680 | ||
b497549a BD |
1681 | /* setup info for port */ |
1682 | port->dev = &platdev->dev; | |
b497549a | 1683 | |
88bb4ea1 TA |
1684 | /* Startup sequence is different for s3c64xx and higher SoC's */ |
1685 | if (s3c24xx_serial_has_interrupt_mask(port)) | |
1686 | s3c24xx_serial_ops.startup = s3c64xx_serial_startup; | |
1687 | ||
b497549a BD |
1688 | port->uartclk = 1; |
1689 | ||
1690 | if (cfg->uart_flags & UPF_CONS_FLOW) { | |
1691 | dbg("s3c24xx_serial_init_port: enabling flow control\n"); | |
1692 | port->flags |= UPF_CONS_FLOW; | |
1693 | } | |
1694 | ||
1695 | /* sort our the physical and virtual addresses for each UART */ | |
1696 | ||
1697 | res = platform_get_resource(platdev, IORESOURCE_MEM, 0); | |
1698 | if (res == NULL) { | |
d20925e1 | 1699 | dev_err(port->dev, "failed to find memory resource for uart\n"); |
b497549a BD |
1700 | return -EINVAL; |
1701 | } | |
1702 | ||
e4ac92df | 1703 | dbg("resource %pR)\n", res); |
b497549a | 1704 | |
41147bfd TA |
1705 | port->membase = devm_ioremap(port->dev, res->start, resource_size(res)); |
1706 | if (!port->membase) { | |
1707 | dev_err(port->dev, "failed to remap controller address\n"); | |
1708 | return -EBUSY; | |
1709 | } | |
1710 | ||
b690ace5 | 1711 | port->mapbase = res->start; |
b497549a BD |
1712 | ret = platform_get_irq(platdev, 0); |
1713 | if (ret < 0) | |
1714 | port->irq = 0; | |
b73c289c | 1715 | else { |
b497549a | 1716 | port->irq = ret; |
b73c289c BD |
1717 | ourport->rx_irq = ret; |
1718 | ourport->tx_irq = ret + 1; | |
1719 | } | |
9303ac15 | 1720 | |
b73c289c BD |
1721 | ret = platform_get_irq(platdev, 1); |
1722 | if (ret > 0) | |
1723 | ourport->tx_irq = ret; | |
658c9d2b RB |
1724 | /* |
1725 | * DMA is currently supported only on DT platforms, if DMA properties | |
1726 | * are specified. | |
1727 | */ | |
1728 | if (platdev->dev.of_node && of_find_property(platdev->dev.of_node, | |
1729 | "dmas", NULL)) { | |
1730 | ourport->dma = devm_kzalloc(port->dev, | |
1731 | sizeof(*ourport->dma), | |
1732 | GFP_KERNEL); | |
1733 | if (!ourport->dma) | |
1734 | return -ENOMEM; | |
1735 | } | |
b497549a BD |
1736 | |
1737 | ourport->clk = clk_get(&platdev->dev, "uart"); | |
60e93575 CK |
1738 | if (IS_ERR(ourport->clk)) { |
1739 | pr_err("%s: Controller clock not found\n", | |
1740 | dev_name(&platdev->dev)); | |
1741 | return PTR_ERR(ourport->clk); | |
1742 | } | |
1743 | ||
1744 | ret = clk_prepare_enable(ourport->clk); | |
1745 | if (ret) { | |
1746 | pr_err("uart: clock failed to prepare+enable: %d\n", ret); | |
1747 | clk_put(ourport->clk); | |
1748 | return ret; | |
1749 | } | |
b497549a | 1750 | |
88bb4ea1 TA |
1751 | /* Keep all interrupts masked and cleared */ |
1752 | if (s3c24xx_serial_has_interrupt_mask(port)) { | |
1753 | wr_regl(port, S3C64XX_UINTM, 0xf); | |
1754 | wr_regl(port, S3C64XX_UINTP, 0xf); | |
1755 | wr_regl(port, S3C64XX_UINTSP, 0xf); | |
1756 | } | |
1757 | ||
1ff5b64d FE |
1758 | dbg("port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n", |
1759 | &port->mapbase, port->membase, port->irq, | |
b73c289c | 1760 | ourport->rx_irq, ourport->tx_irq, port->uartclk); |
b497549a BD |
1761 | |
1762 | /* reset the fifos (and setup the uart) */ | |
1763 | s3c24xx_serial_resetport(port, cfg); | |
1764 | return 0; | |
1765 | } | |
1766 | ||
b497549a BD |
1767 | /* Device driver serial port probe */ |
1768 | ||
26c919e1 | 1769 | static const struct of_device_id s3c24xx_uart_dt_match[]; |
b497549a BD |
1770 | static int probe_index; |
1771 | ||
26c919e1 TA |
1772 | static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data( |
1773 | struct platform_device *pdev) | |
1774 | { | |
1775 | #ifdef CONFIG_OF | |
1776 | if (pdev->dev.of_node) { | |
1777 | const struct of_device_id *match; | |
1778 | match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node); | |
1779 | return (struct s3c24xx_serial_drv_data *)match->data; | |
1780 | } | |
1781 | #endif | |
1782 | return (struct s3c24xx_serial_drv_data *) | |
1783 | platform_get_device_id(pdev)->driver_data; | |
1784 | } | |
1785 | ||
da121506 | 1786 | static int s3c24xx_serial_probe(struct platform_device *pdev) |
b497549a | 1787 | { |
4622eb68 | 1788 | struct device_node *np = pdev->dev.of_node; |
b497549a | 1789 | struct s3c24xx_uart_port *ourport; |
13a9f6c6 | 1790 | int index = probe_index; |
b497549a BD |
1791 | int ret; |
1792 | ||
4622eb68 NKC |
1793 | if (np) { |
1794 | ret = of_alias_get_id(np, "serial"); | |
13a9f6c6 TF |
1795 | if (ret >= 0) |
1796 | index = ret; | |
1797 | } | |
1798 | ||
1799 | dbg("s3c24xx_serial_probe(%p) %d\n", pdev, index); | |
b497549a | 1800 | |
13a9f6c6 | 1801 | ourport = &s3c24xx_serial_ports[index]; |
da121506 | 1802 | |
26c919e1 TA |
1803 | ourport->drv_data = s3c24xx_get_driver_data(pdev); |
1804 | if (!ourport->drv_data) { | |
1805 | dev_err(&pdev->dev, "could not find driver data\n"); | |
1806 | return -ENODEV; | |
1807 | } | |
da121506 | 1808 | |
7cd88831 | 1809 | ourport->baudclk = ERR_PTR(-EINVAL); |
da121506 | 1810 | ourport->info = ourport->drv_data->info; |
574de559 | 1811 | ourport->cfg = (dev_get_platdata(&pdev->dev)) ? |
d4aab206 | 1812 | dev_get_platdata(&pdev->dev) : |
da121506 TA |
1813 | ourport->drv_data->def_cfg; |
1814 | ||
4622eb68 NKC |
1815 | if (np) |
1816 | of_property_read_u32(np, | |
135f07c3 NKC |
1817 | "samsung,uart-fifosize", &ourport->port.fifosize); |
1818 | ||
2f1ba72d RB |
1819 | if (ourport->drv_data->fifosize[index]) |
1820 | ourport->port.fifosize = ourport->drv_data->fifosize[index]; | |
1821 | else if (ourport->info->fifosize) | |
1822 | ourport->port.fifosize = ourport->info->fifosize; | |
da121506 | 1823 | |
81ccb2a6 MS |
1824 | /* |
1825 | * DMA transfers must be aligned at least to cache line size, | |
1826 | * so find minimal transfer size suitable for DMA mode | |
1827 | */ | |
1828 | ourport->min_dma_size = max_t(int, ourport->port.fifosize, | |
1829 | dma_get_cache_alignment()); | |
1830 | ||
b497549a BD |
1831 | probe_index++; |
1832 | ||
1833 | dbg("%s: initialising port %p...\n", __func__, ourport); | |
1834 | ||
da121506 | 1835 | ret = s3c24xx_serial_init_port(ourport, pdev); |
b497549a | 1836 | if (ret < 0) |
8ad711a9 | 1837 | return ret; |
b497549a | 1838 | |
6f134c3c TB |
1839 | if (!s3c24xx_uart_drv.state) { |
1840 | ret = uart_register_driver(&s3c24xx_uart_drv); | |
1841 | if (ret < 0) { | |
1842 | pr_err("Failed to register Samsung UART driver\n"); | |
1843 | return ret; | |
1844 | } | |
1845 | } | |
1846 | ||
b497549a BD |
1847 | dbg("%s: adding port\n", __func__); |
1848 | uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); | |
da121506 | 1849 | platform_set_drvdata(pdev, &ourport->port); |
b497549a | 1850 | |
0da3336f HS |
1851 | /* |
1852 | * Deactivate the clock enabled in s3c24xx_serial_init_port here, | |
1853 | * so that a potential re-enablement through the pm-callback overlaps | |
1854 | * and keeps the clock enabled in this case. | |
1855 | */ | |
1856 | clk_disable_unprepare(ourport->clk); | |
1857 | ||
30555476 BD |
1858 | ret = s3c24xx_serial_cpufreq_register(ourport); |
1859 | if (ret < 0) | |
da121506 | 1860 | dev_err(&pdev->dev, "failed to add cpufreq notifier\n"); |
30555476 | 1861 | |
b497549a | 1862 | return 0; |
b497549a BD |
1863 | } |
1864 | ||
ae8d8a14 | 1865 | static int s3c24xx_serial_remove(struct platform_device *dev) |
b497549a BD |
1866 | { |
1867 | struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); | |
1868 | ||
1869 | if (port) { | |
30555476 | 1870 | s3c24xx_serial_cpufreq_deregister(to_ourport(port)); |
b497549a BD |
1871 | uart_remove_one_port(&s3c24xx_uart_drv, port); |
1872 | } | |
1873 | ||
6f134c3c TB |
1874 | uart_unregister_driver(&s3c24xx_uart_drv); |
1875 | ||
b497549a BD |
1876 | return 0; |
1877 | } | |
1878 | ||
b497549a | 1879 | /* UART power management code */ |
aef7fe52 MH |
1880 | #ifdef CONFIG_PM_SLEEP |
1881 | static int s3c24xx_serial_suspend(struct device *dev) | |
b497549a | 1882 | { |
aef7fe52 | 1883 | struct uart_port *port = s3c24xx_dev_to_port(dev); |
b497549a BD |
1884 | |
1885 | if (port) | |
1886 | uart_suspend_port(&s3c24xx_uart_drv, port); | |
1887 | ||
1888 | return 0; | |
1889 | } | |
1890 | ||
aef7fe52 | 1891 | static int s3c24xx_serial_resume(struct device *dev) |
b497549a | 1892 | { |
aef7fe52 | 1893 | struct uart_port *port = s3c24xx_dev_to_port(dev); |
b497549a BD |
1894 | struct s3c24xx_uart_port *ourport = to_ourport(port); |
1895 | ||
1896 | if (port) { | |
9484b009 | 1897 | clk_prepare_enable(ourport->clk); |
b497549a | 1898 | s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); |
9484b009 | 1899 | clk_disable_unprepare(ourport->clk); |
b497549a BD |
1900 | |
1901 | uart_resume_port(&s3c24xx_uart_drv, port); | |
1902 | } | |
1903 | ||
1904 | return 0; | |
1905 | } | |
aef7fe52 | 1906 | |
d09a7308 MS |
1907 | static int s3c24xx_serial_resume_noirq(struct device *dev) |
1908 | { | |
1909 | struct uart_port *port = s3c24xx_dev_to_port(dev); | |
1910 | ||
1911 | if (port) { | |
1912 | /* restore IRQ mask */ | |
1913 | if (s3c24xx_serial_has_interrupt_mask(port)) { | |
1914 | unsigned int uintm = 0xf; | |
1915 | if (tx_enabled(port)) | |
1916 | uintm &= ~S3C64XX_UINTM_TXD_MSK; | |
1917 | if (rx_enabled(port)) | |
1918 | uintm &= ~S3C64XX_UINTM_RXD_MSK; | |
1919 | wr_regl(port, S3C64XX_UINTM, uintm); | |
1920 | } | |
1921 | } | |
1922 | ||
1923 | return 0; | |
1924 | } | |
1925 | ||
aef7fe52 MH |
1926 | static const struct dev_pm_ops s3c24xx_serial_pm_ops = { |
1927 | .suspend = s3c24xx_serial_suspend, | |
1928 | .resume = s3c24xx_serial_resume, | |
d09a7308 | 1929 | .resume_noirq = s3c24xx_serial_resume_noirq, |
aef7fe52 | 1930 | }; |
b882fc1b KK |
1931 | #define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops) |
1932 | ||
aef7fe52 | 1933 | #else /* !CONFIG_PM_SLEEP */ |
b882fc1b KK |
1934 | |
1935 | #define SERIAL_SAMSUNG_PM_OPS NULL | |
aef7fe52 | 1936 | #endif /* CONFIG_PM_SLEEP */ |
b497549a | 1937 | |
b497549a BD |
1938 | /* Console code */ |
1939 | ||
1940 | #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE | |
1941 | ||
1942 | static struct uart_port *cons_uart; | |
1943 | ||
1944 | static int | |
1945 | s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) | |
1946 | { | |
1947 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
1948 | unsigned long ufstat, utrstat; | |
1949 | ||
1950 | if (ufcon & S3C2410_UFCON_FIFOMODE) { | |
9ddc5b6f | 1951 | /* fifo mode - check amount of data in fifo registers... */ |
b497549a BD |
1952 | |
1953 | ufstat = rd_regl(port, S3C2410_UFSTAT); | |
1954 | return (ufstat & info->tx_fifofull) ? 0 : 1; | |
1955 | } | |
1956 | ||
1957 | /* in non-fifo mode, we go and use the tx buffer empty */ | |
1958 | ||
1959 | utrstat = rd_regl(port, S3C2410_UTRSTAT); | |
1960 | return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0; | |
1961 | } | |
1962 | ||
38adbc54 MS |
1963 | static bool |
1964 | s3c24xx_port_configured(unsigned int ucon) | |
1965 | { | |
1966 | /* consider the serial port configured if the tx/rx mode set */ | |
1967 | return (ucon & 0xf) != 0; | |
1968 | } | |
1969 | ||
93b5c032 JP |
1970 | #ifdef CONFIG_CONSOLE_POLL |
1971 | /* | |
1972 | * Console polling routines for writing and reading from the uart while | |
1973 | * in an interrupt or debug context. | |
1974 | */ | |
1975 | ||
1976 | static int s3c24xx_serial_get_poll_char(struct uart_port *port) | |
1977 | { | |
1978 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
1979 | unsigned int ufstat; | |
1980 | ||
1981 | ufstat = rd_regl(port, S3C2410_UFSTAT); | |
1982 | if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0) | |
1983 | return NO_POLL_CHAR; | |
1984 | ||
1985 | return rd_regb(port, S3C2410_URXH); | |
1986 | } | |
1987 | ||
1988 | static void s3c24xx_serial_put_poll_char(struct uart_port *port, | |
1989 | unsigned char c) | |
1990 | { | |
bb7f09ba DA |
1991 | unsigned int ufcon = rd_regl(port, S3C2410_UFCON); |
1992 | unsigned int ucon = rd_regl(port, S3C2410_UCON); | |
38adbc54 MS |
1993 | |
1994 | /* not possible to xmit on unconfigured port */ | |
1995 | if (!s3c24xx_port_configured(ucon)) | |
1996 | return; | |
93b5c032 JP |
1997 | |
1998 | while (!s3c24xx_serial_console_txrdy(port, ufcon)) | |
1999 | cpu_relax(); | |
bb7f09ba | 2000 | wr_regb(port, S3C2410_UTXH, c); |
93b5c032 JP |
2001 | } |
2002 | ||
2003 | #endif /* CONFIG_CONSOLE_POLL */ | |
2004 | ||
b497549a BD |
2005 | static void |
2006 | s3c24xx_serial_console_putchar(struct uart_port *port, int ch) | |
2007 | { | |
bb7f09ba | 2008 | unsigned int ufcon = rd_regl(port, S3C2410_UFCON); |
38adbc54 | 2009 | |
b497549a | 2010 | while (!s3c24xx_serial_console_txrdy(port, ufcon)) |
f94b0572 | 2011 | cpu_relax(); |
bb7f09ba | 2012 | wr_regb(port, S3C2410_UTXH, ch); |
b497549a BD |
2013 | } |
2014 | ||
2015 | static void | |
2016 | s3c24xx_serial_console_write(struct console *co, const char *s, | |
2017 | unsigned int count) | |
2018 | { | |
ab88c8dc DA |
2019 | unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON); |
2020 | ||
2021 | /* not possible to xmit on unconfigured port */ | |
2022 | if (!s3c24xx_port_configured(ucon)) | |
2023 | return; | |
2024 | ||
b497549a BD |
2025 | uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); |
2026 | } | |
2027 | ||
2028 | static void __init | |
2029 | s3c24xx_serial_get_options(struct uart_port *port, int *baud, | |
2030 | int *parity, int *bits) | |
2031 | { | |
b497549a BD |
2032 | struct clk *clk; |
2033 | unsigned int ulcon; | |
2034 | unsigned int ucon; | |
2035 | unsigned int ubrdiv; | |
2036 | unsigned long rate; | |
5f5a7a55 TA |
2037 | unsigned int clk_sel; |
2038 | char clk_name[MAX_CLK_NAME_LENGTH]; | |
b497549a BD |
2039 | |
2040 | ulcon = rd_regl(port, S3C2410_ULCON); | |
2041 | ucon = rd_regl(port, S3C2410_UCON); | |
2042 | ubrdiv = rd_regl(port, S3C2410_UBRDIV); | |
2043 | ||
2044 | dbg("s3c24xx_serial_get_options: port=%p\n" | |
2045 | "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n", | |
2046 | port, ulcon, ucon, ubrdiv); | |
2047 | ||
38adbc54 | 2048 | if (s3c24xx_port_configured(ucon)) { |
b497549a BD |
2049 | switch (ulcon & S3C2410_LCON_CSMASK) { |
2050 | case S3C2410_LCON_CS5: | |
2051 | *bits = 5; | |
2052 | break; | |
2053 | case S3C2410_LCON_CS6: | |
2054 | *bits = 6; | |
2055 | break; | |
2056 | case S3C2410_LCON_CS7: | |
2057 | *bits = 7; | |
2058 | break; | |
b497549a | 2059 | case S3C2410_LCON_CS8: |
3bcce591 | 2060 | default: |
b497549a BD |
2061 | *bits = 8; |
2062 | break; | |
2063 | } | |
2064 | ||
2065 | switch (ulcon & S3C2410_LCON_PMASK) { | |
2066 | case S3C2410_LCON_PEVEN: | |
2067 | *parity = 'e'; | |
2068 | break; | |
2069 | ||
2070 | case S3C2410_LCON_PODD: | |
2071 | *parity = 'o'; | |
2072 | break; | |
2073 | ||
2074 | case S3C2410_LCON_PNONE: | |
2075 | default: | |
2076 | *parity = 'n'; | |
2077 | } | |
2078 | ||
2079 | /* now calculate the baud rate */ | |
2080 | ||
5f5a7a55 TA |
2081 | clk_sel = s3c24xx_serial_getsource(port); |
2082 | sprintf(clk_name, "clk_uart_baud%d", clk_sel); | |
b497549a | 2083 | |
5f5a7a55 | 2084 | clk = clk_get(port->dev, clk_name); |
7cd88831 | 2085 | if (!IS_ERR(clk)) |
5f5a7a55 | 2086 | rate = clk_get_rate(clk); |
b497549a BD |
2087 | else |
2088 | rate = 1; | |
2089 | ||
b497549a BD |
2090 | *baud = rate / (16 * (ubrdiv + 1)); |
2091 | dbg("calculated baud %d\n", *baud); | |
2092 | } | |
2093 | ||
2094 | } | |
2095 | ||
b497549a BD |
2096 | static int __init |
2097 | s3c24xx_serial_console_setup(struct console *co, char *options) | |
2098 | { | |
2099 | struct uart_port *port; | |
2100 | int baud = 9600; | |
2101 | int bits = 8; | |
2102 | int parity = 'n'; | |
2103 | int flow = 'n'; | |
2104 | ||
2105 | dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n", | |
2106 | co, co->index, options); | |
2107 | ||
2108 | /* is this a valid port */ | |
2109 | ||
03d5e77b | 2110 | if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS) |
b497549a BD |
2111 | co->index = 0; |
2112 | ||
2113 | port = &s3c24xx_serial_ports[co->index].port; | |
2114 | ||
2115 | /* is the port configured? */ | |
2116 | ||
ee430f16 TA |
2117 | if (port->mapbase == 0x0) |
2118 | return -ENODEV; | |
b497549a BD |
2119 | |
2120 | cons_uart = port; | |
2121 | ||
2122 | dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index); | |
2123 | ||
2124 | /* | |
2125 | * Check whether an invalid uart number has been specified, and | |
2126 | * if so, search for the first available port that does have | |
2127 | * console support. | |
2128 | */ | |
2129 | if (options) | |
2130 | uart_parse_options(options, &baud, &parity, &bits, &flow); | |
2131 | else | |
2132 | s3c24xx_serial_get_options(port, &baud, &parity, &bits); | |
2133 | ||
2134 | dbg("s3c24xx_serial_console_setup: baud %d\n", baud); | |
2135 | ||
2136 | return uart_set_options(port, co, baud, parity, bits, flow); | |
2137 | } | |
2138 | ||
b497549a BD |
2139 | static struct console s3c24xx_serial_console = { |
2140 | .name = S3C24XX_SERIAL_NAME, | |
2141 | .device = uart_console_device, | |
2142 | .flags = CON_PRINTBUFFER, | |
2143 | .index = -1, | |
2144 | .write = s3c24xx_serial_console_write, | |
5822a5df TA |
2145 | .setup = s3c24xx_serial_console_setup, |
2146 | .data = &s3c24xx_uart_drv, | |
b497549a | 2147 | }; |
da121506 TA |
2148 | #endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ |
2149 | ||
2150 | #ifdef CONFIG_CPU_S3C2410 | |
2151 | static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { | |
2152 | .info = &(struct s3c24xx_uart_info) { | |
2153 | .name = "Samsung S3C2410 UART", | |
2154 | .type = PORT_S3C2410, | |
2155 | .fifosize = 16, | |
2156 | .rx_fifomask = S3C2410_UFSTAT_RXMASK, | |
2157 | .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, | |
2158 | .rx_fifofull = S3C2410_UFSTAT_RXFULL, | |
2159 | .tx_fifofull = S3C2410_UFSTAT_TXFULL, | |
2160 | .tx_fifomask = S3C2410_UFSTAT_TXMASK, | |
2161 | .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, | |
2162 | .def_clk_sel = S3C2410_UCON_CLKSEL0, | |
2163 | .num_clks = 2, | |
2164 | .clksel_mask = S3C2410_UCON_CLKMASK, | |
2165 | .clksel_shift = S3C2410_UCON_CLKSHIFT, | |
2166 | }, | |
2167 | .def_cfg = &(struct s3c2410_uartcfg) { | |
2168 | .ucon = S3C2410_UCON_DEFAULT, | |
2169 | .ufcon = S3C2410_UFCON_DEFAULT, | |
2170 | }, | |
2171 | }; | |
2172 | #define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data) | |
2173 | #else | |
2174 | #define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
2175 | #endif | |
b497549a | 2176 | |
da121506 TA |
2177 | #ifdef CONFIG_CPU_S3C2412 |
2178 | static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { | |
2179 | .info = &(struct s3c24xx_uart_info) { | |
2180 | .name = "Samsung S3C2412 UART", | |
2181 | .type = PORT_S3C2412, | |
2182 | .fifosize = 64, | |
2183 | .has_divslot = 1, | |
2184 | .rx_fifomask = S3C2440_UFSTAT_RXMASK, | |
2185 | .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, | |
2186 | .rx_fifofull = S3C2440_UFSTAT_RXFULL, | |
2187 | .tx_fifofull = S3C2440_UFSTAT_TXFULL, | |
2188 | .tx_fifomask = S3C2440_UFSTAT_TXMASK, | |
2189 | .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, | |
2190 | .def_clk_sel = S3C2410_UCON_CLKSEL2, | |
2191 | .num_clks = 4, | |
2192 | .clksel_mask = S3C2412_UCON_CLKMASK, | |
2193 | .clksel_shift = S3C2412_UCON_CLKSHIFT, | |
2194 | }, | |
2195 | .def_cfg = &(struct s3c2410_uartcfg) { | |
2196 | .ucon = S3C2410_UCON_DEFAULT, | |
2197 | .ufcon = S3C2410_UFCON_DEFAULT, | |
2198 | }, | |
2199 | }; | |
2200 | #define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data) | |
2201 | #else | |
2202 | #define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
2203 | #endif | |
b497549a | 2204 | |
da121506 | 2205 | #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \ |
b26469a8 | 2206 | defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442) |
da121506 TA |
2207 | static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { |
2208 | .info = &(struct s3c24xx_uart_info) { | |
2209 | .name = "Samsung S3C2440 UART", | |
2210 | .type = PORT_S3C2440, | |
2211 | .fifosize = 64, | |
2212 | .has_divslot = 1, | |
2213 | .rx_fifomask = S3C2440_UFSTAT_RXMASK, | |
2214 | .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, | |
2215 | .rx_fifofull = S3C2440_UFSTAT_RXFULL, | |
2216 | .tx_fifofull = S3C2440_UFSTAT_TXFULL, | |
2217 | .tx_fifomask = S3C2440_UFSTAT_TXMASK, | |
2218 | .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, | |
2219 | .def_clk_sel = S3C2410_UCON_CLKSEL2, | |
2220 | .num_clks = 4, | |
2221 | .clksel_mask = S3C2412_UCON_CLKMASK, | |
2222 | .clksel_shift = S3C2412_UCON_CLKSHIFT, | |
2223 | }, | |
2224 | .def_cfg = &(struct s3c2410_uartcfg) { | |
2225 | .ucon = S3C2410_UCON_DEFAULT, | |
2226 | .ufcon = S3C2410_UFCON_DEFAULT, | |
2227 | }, | |
2228 | }; | |
2229 | #define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data) | |
2230 | #else | |
2231 | #define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
2232 | #endif | |
b497549a | 2233 | |
953b53a7 | 2234 | #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) |
da121506 TA |
2235 | static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { |
2236 | .info = &(struct s3c24xx_uart_info) { | |
2237 | .name = "Samsung S3C6400 UART", | |
2238 | .type = PORT_S3C6400, | |
2239 | .fifosize = 64, | |
2240 | .has_divslot = 1, | |
2241 | .rx_fifomask = S3C2440_UFSTAT_RXMASK, | |
2242 | .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, | |
2243 | .rx_fifofull = S3C2440_UFSTAT_RXFULL, | |
2244 | .tx_fifofull = S3C2440_UFSTAT_TXFULL, | |
2245 | .tx_fifomask = S3C2440_UFSTAT_TXMASK, | |
2246 | .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, | |
2247 | .def_clk_sel = S3C2410_UCON_CLKSEL2, | |
2248 | .num_clks = 4, | |
2249 | .clksel_mask = S3C6400_UCON_CLKMASK, | |
2250 | .clksel_shift = S3C6400_UCON_CLKSHIFT, | |
2251 | }, | |
2252 | .def_cfg = &(struct s3c2410_uartcfg) { | |
2253 | .ucon = S3C2410_UCON_DEFAULT, | |
2254 | .ufcon = S3C2410_UFCON_DEFAULT, | |
2255 | }, | |
2256 | }; | |
2257 | #define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data) | |
2258 | #else | |
2259 | #define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
2260 | #endif | |
b497549a | 2261 | |
da121506 TA |
2262 | #ifdef CONFIG_CPU_S5PV210 |
2263 | static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { | |
2264 | .info = &(struct s3c24xx_uart_info) { | |
2265 | .name = "Samsung S5PV210 UART", | |
2266 | .type = PORT_S3C6400, | |
2267 | .has_divslot = 1, | |
2268 | .rx_fifomask = S5PV210_UFSTAT_RXMASK, | |
2269 | .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, | |
2270 | .rx_fifofull = S5PV210_UFSTAT_RXFULL, | |
2271 | .tx_fifofull = S5PV210_UFSTAT_TXFULL, | |
2272 | .tx_fifomask = S5PV210_UFSTAT_TXMASK, | |
2273 | .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, | |
2274 | .def_clk_sel = S3C2410_UCON_CLKSEL0, | |
2275 | .num_clks = 2, | |
2276 | .clksel_mask = S5PV210_UCON_CLKMASK, | |
2277 | .clksel_shift = S5PV210_UCON_CLKSHIFT, | |
2278 | }, | |
2279 | .def_cfg = &(struct s3c2410_uartcfg) { | |
2280 | .ucon = S5PV210_UCON_DEFAULT, | |
2281 | .ufcon = S5PV210_UFCON_DEFAULT, | |
2282 | }, | |
2283 | .fifosize = { 256, 64, 16, 16 }, | |
2284 | }; | |
2285 | #define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data) | |
2286 | #else | |
2287 | #define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
2288 | #endif | |
b497549a | 2289 | |
33f88136 | 2290 | #if defined(CONFIG_ARCH_EXYNOS) |
31ec77ac CC |
2291 | #define EXYNOS_COMMON_SERIAL_DRV_DATA \ |
2292 | .info = &(struct s3c24xx_uart_info) { \ | |
2293 | .name = "Samsung Exynos UART", \ | |
2294 | .type = PORT_S3C6400, \ | |
2295 | .has_divslot = 1, \ | |
2296 | .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ | |
2297 | .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ | |
2298 | .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ | |
2299 | .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ | |
2300 | .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ | |
2301 | .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ | |
2302 | .def_clk_sel = S3C2410_UCON_CLKSEL0, \ | |
2303 | .num_clks = 1, \ | |
2304 | .clksel_mask = 0, \ | |
2305 | .clksel_shift = 0, \ | |
2306 | }, \ | |
2307 | .def_cfg = &(struct s3c2410_uartcfg) { \ | |
2308 | .ucon = S5PV210_UCON_DEFAULT, \ | |
2309 | .ufcon = S5PV210_UFCON_DEFAULT, \ | |
2310 | .has_fracval = 1, \ | |
2311 | } \ | |
2312 | ||
da121506 | 2313 | static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { |
31ec77ac | 2314 | EXYNOS_COMMON_SERIAL_DRV_DATA, |
da121506 TA |
2315 | .fifosize = { 256, 64, 16, 16 }, |
2316 | }; | |
31ec77ac CC |
2317 | |
2318 | static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = { | |
2319 | EXYNOS_COMMON_SERIAL_DRV_DATA, | |
2320 | .fifosize = { 64, 256, 16, 256 }, | |
2321 | }; | |
2322 | ||
da121506 | 2323 | #define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data) |
31ec77ac | 2324 | #define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data) |
da121506 TA |
2325 | #else |
2326 | #define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
31ec77ac | 2327 | #define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL |
da121506 | 2328 | #endif |
b497549a | 2329 | |
24ee4df1 | 2330 | static const struct platform_device_id s3c24xx_serial_driver_ids[] = { |
da121506 TA |
2331 | { |
2332 | .name = "s3c2410-uart", | |
2333 | .driver_data = S3C2410_SERIAL_DRV_DATA, | |
2334 | }, { | |
2335 | .name = "s3c2412-uart", | |
2336 | .driver_data = S3C2412_SERIAL_DRV_DATA, | |
2337 | }, { | |
2338 | .name = "s3c2440-uart", | |
2339 | .driver_data = S3C2440_SERIAL_DRV_DATA, | |
2340 | }, { | |
2341 | .name = "s3c6400-uart", | |
2342 | .driver_data = S3C6400_SERIAL_DRV_DATA, | |
2343 | }, { | |
2344 | .name = "s5pv210-uart", | |
2345 | .driver_data = S5PV210_SERIAL_DRV_DATA, | |
2346 | }, { | |
2347 | .name = "exynos4210-uart", | |
2348 | .driver_data = EXYNOS4210_SERIAL_DRV_DATA, | |
31ec77ac CC |
2349 | }, { |
2350 | .name = "exynos5433-uart", | |
2351 | .driver_data = EXYNOS5433_SERIAL_DRV_DATA, | |
da121506 TA |
2352 | }, |
2353 | { }, | |
2354 | }; | |
2355 | MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); | |
2356 | ||
26c919e1 TA |
2357 | #ifdef CONFIG_OF |
2358 | static const struct of_device_id s3c24xx_uart_dt_match[] = { | |
666ca0b9 HS |
2359 | { .compatible = "samsung,s3c2410-uart", |
2360 | .data = (void *)S3C2410_SERIAL_DRV_DATA }, | |
2361 | { .compatible = "samsung,s3c2412-uart", | |
2362 | .data = (void *)S3C2412_SERIAL_DRV_DATA }, | |
2363 | { .compatible = "samsung,s3c2440-uart", | |
2364 | .data = (void *)S3C2440_SERIAL_DRV_DATA }, | |
2365 | { .compatible = "samsung,s3c6400-uart", | |
2366 | .data = (void *)S3C6400_SERIAL_DRV_DATA }, | |
2367 | { .compatible = "samsung,s5pv210-uart", | |
2368 | .data = (void *)S5PV210_SERIAL_DRV_DATA }, | |
26c919e1 | 2369 | { .compatible = "samsung,exynos4210-uart", |
a169a888 | 2370 | .data = (void *)EXYNOS4210_SERIAL_DRV_DATA }, |
31ec77ac CC |
2371 | { .compatible = "samsung,exynos5433-uart", |
2372 | .data = (void *)EXYNOS5433_SERIAL_DRV_DATA }, | |
26c919e1 TA |
2373 | {}, |
2374 | }; | |
2375 | MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); | |
26c919e1 TA |
2376 | #endif |
2377 | ||
da121506 TA |
2378 | static struct platform_driver samsung_serial_driver = { |
2379 | .probe = s3c24xx_serial_probe, | |
2d47b716 | 2380 | .remove = s3c24xx_serial_remove, |
da121506 TA |
2381 | .id_table = s3c24xx_serial_driver_ids, |
2382 | .driver = { | |
2383 | .name = "samsung-uart", | |
da121506 | 2384 | .pm = SERIAL_SAMSUNG_PM_OPS, |
905f4ba2 | 2385 | .of_match_table = of_match_ptr(s3c24xx_uart_dt_match), |
da121506 TA |
2386 | }, |
2387 | }; | |
b497549a | 2388 | |
6f134c3c | 2389 | module_platform_driver(samsung_serial_driver); |
b497549a | 2390 | |
c3bda295 | 2391 | #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE |
b94ba032 TF |
2392 | /* |
2393 | * Early console. | |
2394 | */ | |
2395 | ||
2396 | struct samsung_early_console_data { | |
2397 | u32 txfull_mask; | |
2398 | }; | |
2399 | ||
2400 | static void samsung_early_busyuart(struct uart_port *port) | |
2401 | { | |
2402 | while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE)) | |
2403 | ; | |
2404 | } | |
2405 | ||
2406 | static void samsung_early_busyuart_fifo(struct uart_port *port) | |
2407 | { | |
2408 | struct samsung_early_console_data *data = port->private_data; | |
2409 | ||
2410 | while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask) | |
2411 | ; | |
2412 | } | |
2413 | ||
2414 | static void samsung_early_putc(struct uart_port *port, int c) | |
2415 | { | |
2416 | if (readl(port->membase + S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) | |
2417 | samsung_early_busyuart_fifo(port); | |
2418 | else | |
2419 | samsung_early_busyuart(port); | |
2420 | ||
2421 | writeb(c, port->membase + S3C2410_UTXH); | |
2422 | } | |
2423 | ||
2424 | static void samsung_early_write(struct console *con, const char *s, unsigned n) | |
2425 | { | |
2426 | struct earlycon_device *dev = con->data; | |
2427 | ||
2428 | uart_console_write(&dev->port, s, n, samsung_early_putc); | |
2429 | } | |
2430 | ||
2431 | static int __init samsung_early_console_setup(struct earlycon_device *device, | |
2432 | const char *opt) | |
2433 | { | |
2434 | if (!device->port.membase) | |
2435 | return -ENODEV; | |
2436 | ||
2437 | device->con->write = samsung_early_write; | |
2438 | return 0; | |
2439 | } | |
2440 | ||
2441 | /* S3C2410 */ | |
2442 | static struct samsung_early_console_data s3c2410_early_console_data = { | |
2443 | .txfull_mask = S3C2410_UFSTAT_TXFULL, | |
2444 | }; | |
2445 | ||
2446 | static int __init s3c2410_early_console_setup(struct earlycon_device *device, | |
2447 | const char *opt) | |
2448 | { | |
2449 | device->port.private_data = &s3c2410_early_console_data; | |
2450 | return samsung_early_console_setup(device, opt); | |
2451 | } | |
2452 | OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart", | |
2453 | s3c2410_early_console_setup); | |
2454 | EARLYCON_DECLARE(s3c2410, s3c2410_early_console_setup); | |
2455 | ||
2456 | /* S3C2412, S3C2440, S3C64xx */ | |
2457 | static struct samsung_early_console_data s3c2440_early_console_data = { | |
2458 | .txfull_mask = S3C2440_UFSTAT_TXFULL, | |
2459 | }; | |
2460 | ||
2461 | static int __init s3c2440_early_console_setup(struct earlycon_device *device, | |
2462 | const char *opt) | |
2463 | { | |
2464 | device->port.private_data = &s3c2440_early_console_data; | |
2465 | return samsung_early_console_setup(device, opt); | |
2466 | } | |
2467 | OF_EARLYCON_DECLARE(s3c2412, "samsung,s3c2412-uart", | |
2468 | s3c2440_early_console_setup); | |
2469 | OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart", | |
2470 | s3c2440_early_console_setup); | |
2471 | OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart", | |
2472 | s3c2440_early_console_setup); | |
2473 | EARLYCON_DECLARE(s3c2412, s3c2440_early_console_setup); | |
2474 | EARLYCON_DECLARE(s3c2440, s3c2440_early_console_setup); | |
2475 | EARLYCON_DECLARE(s3c6400, s3c2440_early_console_setup); | |
2476 | ||
2477 | /* S5PV210, EXYNOS */ | |
2478 | static struct samsung_early_console_data s5pv210_early_console_data = { | |
2479 | .txfull_mask = S5PV210_UFSTAT_TXFULL, | |
2480 | }; | |
2481 | ||
2482 | static int __init s5pv210_early_console_setup(struct earlycon_device *device, | |
2483 | const char *opt) | |
2484 | { | |
2485 | device->port.private_data = &s5pv210_early_console_data; | |
2486 | return samsung_early_console_setup(device, opt); | |
2487 | } | |
2488 | OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart", | |
2489 | s5pv210_early_console_setup); | |
2490 | OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart", | |
2491 | s5pv210_early_console_setup); | |
2492 | EARLYCON_DECLARE(s5pv210, s5pv210_early_console_setup); | |
2493 | EARLYCON_DECLARE(exynos4210, s5pv210_early_console_setup); | |
c3bda295 | 2494 | #endif |
b94ba032 | 2495 | |
da121506 | 2496 | MODULE_ALIAS("platform:samsung-uart"); |
b497549a BD |
2497 | MODULE_DESCRIPTION("Samsung SoC Serial port driver"); |
2498 | MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); | |
2499 | MODULE_LICENSE("GPL v2"); |