Commit | Line | Data |
---|---|---|
99edb3d1 | 1 | /* |
b497549a BD |
2 | * Driver core for Samsung SoC onboard UARTs. |
3 | * | |
ccae941e | 4 | * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics |
b497549a BD |
5 | * http://armlinux.simtec.co.uk/ |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License version 2 as | |
9 | * published by the Free Software Foundation. | |
10 | */ | |
11 | ||
12 | /* Hote on 2410 error handling | |
13 | * | |
14 | * The s3c2410 manual has a love/hate affair with the contents of the | |
15 | * UERSTAT register in the UART blocks, and keeps marking some of the | |
16 | * error bits as reserved. Having checked with the s3c2410x01, | |
17 | * it copes with BREAKs properly, so I am happy to ignore the RESERVED | |
18 | * feature from the latter versions of the manual. | |
19 | * | |
20 | * If it becomes aparrent that latter versions of the 2410 remove these | |
21 | * bits, then action will have to be taken to differentiate the versions | |
22 | * and change the policy on BREAK | |
23 | * | |
24 | * BJD, 04-Nov-2004 | |
25 | */ | |
26 | ||
27 | #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) | |
28 | #define SUPPORT_SYSRQ | |
29 | #endif | |
30 | ||
62c37eed RB |
31 | #include <linux/dmaengine.h> |
32 | #include <linux/dma-mapping.h> | |
33 | #include <linux/slab.h> | |
b497549a BD |
34 | #include <linux/module.h> |
35 | #include <linux/ioport.h> | |
36 | #include <linux/io.h> | |
37 | #include <linux/platform_device.h> | |
38 | #include <linux/init.h> | |
39 | #include <linux/sysrq.h> | |
40 | #include <linux/console.h> | |
41 | #include <linux/tty.h> | |
42 | #include <linux/tty_flip.h> | |
43 | #include <linux/serial_core.h> | |
44 | #include <linux/serial.h> | |
9ee51f01 | 45 | #include <linux/serial_s3c.h> |
b497549a BD |
46 | #include <linux/delay.h> |
47 | #include <linux/clk.h> | |
30555476 | 48 | #include <linux/cpufreq.h> |
26c919e1 | 49 | #include <linux/of.h> |
b497549a BD |
50 | |
51 | #include <asm/irq.h> | |
52 | ||
b497549a BD |
53 | #include "samsung.h" |
54 | ||
e4ac92df JP |
55 | #if defined(CONFIG_SERIAL_SAMSUNG_DEBUG) && \ |
56 | defined(CONFIG_DEBUG_LL) && \ | |
57 | !defined(MODULE) | |
58 | ||
59 | extern void printascii(const char *); | |
60 | ||
61 | __printf(1, 2) | |
62 | static void dbg(const char *fmt, ...) | |
63 | { | |
64 | va_list va; | |
65 | char buff[256]; | |
66 | ||
67 | va_start(va, fmt); | |
a859c8b2 | 68 | vscnprintf(buff, sizeof(buff), fmt, va); |
e4ac92df JP |
69 | va_end(va); |
70 | ||
71 | printascii(buff); | |
72 | } | |
73 | ||
74 | #else | |
75 | #define dbg(fmt, ...) do { if (0) no_printk(fmt, ##__VA_ARGS__); } while (0) | |
76 | #endif | |
77 | ||
b497549a BD |
78 | /* UART name and device definitions */ |
79 | ||
80 | #define S3C24XX_SERIAL_NAME "ttySAC" | |
81 | #define S3C24XX_SERIAL_MAJOR 204 | |
82 | #define S3C24XX_SERIAL_MINOR 64 | |
83 | ||
29bef799 RB |
84 | #define S3C24XX_TX_PIO 1 |
85 | #define S3C24XX_TX_DMA 2 | |
b543c301 RB |
86 | #define S3C24XX_RX_PIO 1 |
87 | #define S3C24XX_RX_DMA 2 | |
b497549a BD |
88 | /* macros to change one thing to another */ |
89 | ||
90 | #define tx_enabled(port) ((port)->unused[0]) | |
91 | #define rx_enabled(port) ((port)->unused[1]) | |
92 | ||
25985edc | 93 | /* flag to ignore all characters coming in */ |
b497549a BD |
94 | #define RXSTAT_DUMMY_READ (0x10000000) |
95 | ||
96 | static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port) | |
97 | { | |
98 | return container_of(port, struct s3c24xx_uart_port, port); | |
99 | } | |
100 | ||
101 | /* translate a port to the device name */ | |
102 | ||
103 | static inline const char *s3c24xx_serial_portname(struct uart_port *port) | |
104 | { | |
105 | return to_platform_device(port->dev)->name; | |
106 | } | |
107 | ||
108 | static int s3c24xx_serial_txempty_nofifo(struct uart_port *port) | |
109 | { | |
9303ac15 | 110 | return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE; |
b497549a BD |
111 | } |
112 | ||
88bb4ea1 TA |
113 | /* |
114 | * s3c64xx and later SoC's include the interrupt mask and status registers in | |
115 | * the controller itself, unlike the s3c24xx SoC's which have these registers | |
116 | * in the interrupt controller. Check if the port type is s3c64xx or higher. | |
117 | */ | |
118 | static int s3c24xx_serial_has_interrupt_mask(struct uart_port *port) | |
119 | { | |
120 | return to_ourport(port)->info->type == PORT_S3C6400; | |
121 | } | |
122 | ||
b497549a BD |
123 | static void s3c24xx_serial_rx_enable(struct uart_port *port) |
124 | { | |
125 | unsigned long flags; | |
126 | unsigned int ucon, ufcon; | |
127 | int count = 10000; | |
128 | ||
129 | spin_lock_irqsave(&port->lock, flags); | |
130 | ||
131 | while (--count && !s3c24xx_serial_txempty_nofifo(port)) | |
132 | udelay(100); | |
133 | ||
134 | ufcon = rd_regl(port, S3C2410_UFCON); | |
135 | ufcon |= S3C2410_UFCON_RESETRX; | |
136 | wr_regl(port, S3C2410_UFCON, ufcon); | |
137 | ||
138 | ucon = rd_regl(port, S3C2410_UCON); | |
139 | ucon |= S3C2410_UCON_RXIRQMODE; | |
140 | wr_regl(port, S3C2410_UCON, ucon); | |
141 | ||
142 | rx_enabled(port) = 1; | |
143 | spin_unlock_irqrestore(&port->lock, flags); | |
144 | } | |
145 | ||
146 | static void s3c24xx_serial_rx_disable(struct uart_port *port) | |
147 | { | |
148 | unsigned long flags; | |
149 | unsigned int ucon; | |
150 | ||
151 | spin_lock_irqsave(&port->lock, flags); | |
152 | ||
153 | ucon = rd_regl(port, S3C2410_UCON); | |
154 | ucon &= ~S3C2410_UCON_RXIRQMODE; | |
155 | wr_regl(port, S3C2410_UCON, ucon); | |
156 | ||
157 | rx_enabled(port) = 0; | |
158 | spin_unlock_irqrestore(&port->lock, flags); | |
159 | } | |
160 | ||
161 | static void s3c24xx_serial_stop_tx(struct uart_port *port) | |
162 | { | |
b73c289c | 163 | struct s3c24xx_uart_port *ourport = to_ourport(port); |
29bef799 RB |
164 | struct s3c24xx_uart_dma *dma = ourport->dma; |
165 | struct circ_buf *xmit = &port->state->xmit; | |
166 | struct dma_tx_state state; | |
167 | int count; | |
b73c289c | 168 | |
29bef799 RB |
169 | if (!tx_enabled(port)) |
170 | return; | |
171 | ||
172 | if (s3c24xx_serial_has_interrupt_mask(port)) | |
173 | __set_bit(S3C64XX_UINTM_TXD, | |
174 | portaddrl(port, S3C64XX_UINTM)); | |
175 | else | |
176 | disable_irq_nosync(ourport->tx_irq); | |
177 | ||
178 | if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) { | |
179 | dmaengine_pause(dma->tx_chan); | |
180 | dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state); | |
181 | dmaengine_terminate_all(dma->tx_chan); | |
182 | dma_sync_single_for_cpu(ourport->port.dev, | |
183 | dma->tx_transfer_addr, dma->tx_size, DMA_TO_DEVICE); | |
184 | async_tx_ack(dma->tx_desc); | |
185 | count = dma->tx_bytes_requested - state.residue; | |
186 | xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); | |
187 | port->icount.tx += count; | |
b497549a | 188 | } |
29bef799 RB |
189 | |
190 | tx_enabled(port) = 0; | |
191 | ourport->tx_in_progress = 0; | |
192 | ||
193 | if (port->flags & UPF_CONS_FLOW) | |
194 | s3c24xx_serial_rx_enable(port); | |
195 | ||
196 | ourport->tx_mode = 0; | |
197 | } | |
198 | ||
199 | static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport); | |
200 | ||
201 | static void s3c24xx_serial_tx_dma_complete(void *args) | |
202 | { | |
203 | struct s3c24xx_uart_port *ourport = args; | |
204 | struct uart_port *port = &ourport->port; | |
205 | struct circ_buf *xmit = &port->state->xmit; | |
206 | struct s3c24xx_uart_dma *dma = ourport->dma; | |
207 | struct dma_tx_state state; | |
208 | unsigned long flags; | |
209 | int count; | |
210 | ||
211 | ||
212 | dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state); | |
213 | count = dma->tx_bytes_requested - state.residue; | |
214 | async_tx_ack(dma->tx_desc); | |
215 | ||
216 | dma_sync_single_for_cpu(ourport->port.dev, dma->tx_transfer_addr, | |
217 | dma->tx_size, DMA_TO_DEVICE); | |
218 | ||
219 | spin_lock_irqsave(&port->lock, flags); | |
220 | ||
221 | xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); | |
222 | port->icount.tx += count; | |
223 | ourport->tx_in_progress = 0; | |
224 | ||
225 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
226 | uart_write_wakeup(port); | |
227 | ||
228 | s3c24xx_serial_start_next_tx(ourport); | |
229 | spin_unlock_irqrestore(&port->lock, flags); | |
230 | } | |
231 | ||
232 | static void enable_tx_dma(struct s3c24xx_uart_port *ourport) | |
233 | { | |
234 | struct uart_port *port = &ourport->port; | |
235 | u32 ucon; | |
236 | ||
237 | /* Mask Tx interrupt */ | |
238 | if (s3c24xx_serial_has_interrupt_mask(port)) | |
239 | __set_bit(S3C64XX_UINTM_TXD, | |
240 | portaddrl(port, S3C64XX_UINTM)); | |
241 | else | |
242 | disable_irq_nosync(ourport->tx_irq); | |
243 | ||
244 | /* Enable tx dma mode */ | |
245 | ucon = rd_regl(port, S3C2410_UCON); | |
246 | ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK); | |
247 | ucon |= (dma_get_cache_alignment() >= 16) ? | |
248 | S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1; | |
249 | ucon |= S3C64XX_UCON_TXMODE_DMA; | |
250 | wr_regl(port, S3C2410_UCON, ucon); | |
251 | ||
252 | ourport->tx_mode = S3C24XX_TX_DMA; | |
253 | } | |
254 | ||
255 | static void enable_tx_pio(struct s3c24xx_uart_port *ourport) | |
256 | { | |
257 | struct uart_port *port = &ourport->port; | |
258 | u32 ucon, ufcon; | |
259 | ||
260 | /* Set ufcon txtrig */ | |
261 | ourport->tx_in_progress = S3C24XX_TX_PIO; | |
262 | ufcon = rd_regl(port, S3C2410_UFCON); | |
263 | wr_regl(port, S3C2410_UFCON, ufcon); | |
264 | ||
265 | /* Enable tx pio mode */ | |
266 | ucon = rd_regl(port, S3C2410_UCON); | |
267 | ucon &= ~(S3C64XX_UCON_TXMODE_MASK); | |
268 | ucon |= S3C64XX_UCON_TXMODE_CPU; | |
269 | wr_regl(port, S3C2410_UCON, ucon); | |
270 | ||
271 | /* Unmask Tx interrupt */ | |
272 | if (s3c24xx_serial_has_interrupt_mask(port)) | |
273 | __clear_bit(S3C64XX_UINTM_TXD, | |
274 | portaddrl(port, S3C64XX_UINTM)); | |
275 | else | |
276 | enable_irq(ourport->tx_irq); | |
277 | ||
278 | ourport->tx_mode = S3C24XX_TX_PIO; | |
279 | } | |
280 | ||
281 | static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport) | |
282 | { | |
283 | if (ourport->tx_mode != S3C24XX_TX_PIO) | |
284 | enable_tx_pio(ourport); | |
b497549a BD |
285 | } |
286 | ||
29bef799 RB |
287 | static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport, |
288 | unsigned int count) | |
289 | { | |
290 | struct uart_port *port = &ourport->port; | |
291 | struct circ_buf *xmit = &port->state->xmit; | |
292 | struct s3c24xx_uart_dma *dma = ourport->dma; | |
293 | ||
294 | ||
295 | if (ourport->tx_mode != S3C24XX_TX_DMA) | |
296 | enable_tx_dma(ourport); | |
297 | ||
298 | while (xmit->tail & (dma_get_cache_alignment() - 1)) { | |
299 | if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) | |
300 | return 0; | |
301 | wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]); | |
302 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
303 | port->icount.tx++; | |
304 | count--; | |
305 | } | |
306 | ||
307 | dma->tx_size = count & ~(dma_get_cache_alignment() - 1); | |
308 | dma->tx_transfer_addr = dma->tx_addr + xmit->tail; | |
309 | ||
310 | dma_sync_single_for_device(ourport->port.dev, dma->tx_transfer_addr, | |
311 | dma->tx_size, DMA_TO_DEVICE); | |
312 | ||
313 | dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan, | |
314 | dma->tx_transfer_addr, dma->tx_size, | |
315 | DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); | |
316 | if (!dma->tx_desc) { | |
317 | dev_err(ourport->port.dev, "Unable to get desc for Tx\n"); | |
318 | return -EIO; | |
319 | } | |
320 | ||
321 | dma->tx_desc->callback = s3c24xx_serial_tx_dma_complete; | |
322 | dma->tx_desc->callback_param = ourport; | |
323 | dma->tx_bytes_requested = dma->tx_size; | |
324 | ||
325 | ourport->tx_in_progress = S3C24XX_TX_DMA; | |
326 | dma->tx_cookie = dmaengine_submit(dma->tx_desc); | |
327 | dma_async_issue_pending(dma->tx_chan); | |
328 | return 0; | |
329 | } | |
330 | ||
331 | static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport) | |
332 | { | |
333 | struct uart_port *port = &ourport->port; | |
334 | struct circ_buf *xmit = &port->state->xmit; | |
335 | unsigned long count; | |
336 | ||
337 | /* Get data size up to the end of buffer */ | |
338 | count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); | |
339 | ||
340 | if (!count) { | |
341 | s3c24xx_serial_stop_tx(port); | |
342 | return; | |
343 | } | |
344 | ||
345 | if (!ourport->dma || !ourport->dma->tx_chan || count < port->fifosize) | |
346 | s3c24xx_serial_start_tx_pio(ourport); | |
347 | else | |
348 | s3c24xx_serial_start_tx_dma(ourport, count); | |
349 | } | |
350 | ||
351 | void s3c24xx_serial_start_tx(struct uart_port *port) | |
b497549a | 352 | { |
b73c289c | 353 | struct s3c24xx_uart_port *ourport = to_ourport(port); |
29bef799 | 354 | struct circ_buf *xmit = &port->state->xmit; |
b73c289c | 355 | |
b497549a BD |
356 | if (!tx_enabled(port)) { |
357 | if (port->flags & UPF_CONS_FLOW) | |
358 | s3c24xx_serial_rx_disable(port); | |
359 | ||
b497549a | 360 | tx_enabled(port) = 1; |
ba019a3e | 361 | if (!ourport->dma || !ourport->dma->tx_chan) |
29bef799 | 362 | s3c24xx_serial_start_tx_pio(ourport); |
29bef799 RB |
363 | } |
364 | ||
365 | if (ourport->dma && ourport->dma->tx_chan) { | |
366 | if (!uart_circ_empty(xmit) && !ourport->tx_in_progress) | |
367 | s3c24xx_serial_start_next_tx(ourport); | |
b497549a BD |
368 | } |
369 | } | |
370 | ||
b543c301 RB |
371 | static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport, |
372 | struct tty_port *tty, int count) | |
373 | { | |
374 | struct s3c24xx_uart_dma *dma = ourport->dma; | |
375 | int copied; | |
376 | ||
377 | if (!count) | |
378 | return; | |
379 | ||
380 | dma_sync_single_for_cpu(ourport->port.dev, dma->rx_addr, | |
381 | dma->rx_size, DMA_FROM_DEVICE); | |
382 | ||
383 | ourport->port.icount.rx += count; | |
384 | if (!tty) { | |
385 | dev_err(ourport->port.dev, "No tty port\n"); | |
386 | return; | |
387 | } | |
388 | copied = tty_insert_flip_string(tty, | |
389 | ((unsigned char *)(ourport->dma->rx_buf)), count); | |
390 | if (copied != count) { | |
391 | WARN_ON(1); | |
392 | dev_err(ourport->port.dev, "RxData copy to tty layer failed\n"); | |
393 | } | |
394 | } | |
395 | ||
396 | static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, | |
397 | unsigned long ufstat); | |
398 | ||
399 | static void uart_rx_drain_fifo(struct s3c24xx_uart_port *ourport) | |
400 | { | |
401 | struct uart_port *port = &ourport->port; | |
402 | struct tty_port *tty = &port->state->port; | |
403 | unsigned int ch, ufstat; | |
404 | unsigned int count; | |
405 | ||
406 | ufstat = rd_regl(port, S3C2410_UFSTAT); | |
407 | count = s3c24xx_serial_rx_fifocnt(ourport, ufstat); | |
408 | ||
409 | if (!count) | |
410 | return; | |
411 | ||
412 | while (count-- > 0) { | |
413 | ch = rd_regb(port, S3C2410_URXH); | |
414 | ||
415 | ourport->port.icount.rx++; | |
416 | tty_insert_flip_char(tty, ch, TTY_NORMAL); | |
417 | } | |
418 | ||
419 | tty_flip_buffer_push(tty); | |
420 | } | |
421 | ||
b497549a BD |
422 | static void s3c24xx_serial_stop_rx(struct uart_port *port) |
423 | { | |
b73c289c | 424 | struct s3c24xx_uart_port *ourport = to_ourport(port); |
b543c301 RB |
425 | struct s3c24xx_uart_dma *dma = ourport->dma; |
426 | struct tty_port *t = &port->state->port; | |
427 | struct dma_tx_state state; | |
428 | enum dma_status dma_status; | |
429 | unsigned int received; | |
b73c289c | 430 | |
b497549a BD |
431 | if (rx_enabled(port)) { |
432 | dbg("s3c24xx_serial_stop_rx: port=%p\n", port); | |
88bb4ea1 TA |
433 | if (s3c24xx_serial_has_interrupt_mask(port)) |
434 | __set_bit(S3C64XX_UINTM_RXD, | |
435 | portaddrl(port, S3C64XX_UINTM)); | |
436 | else | |
437 | disable_irq_nosync(ourport->rx_irq); | |
b497549a BD |
438 | rx_enabled(port) = 0; |
439 | } | |
b543c301 RB |
440 | if (dma && dma->rx_chan) { |
441 | dmaengine_pause(dma->tx_chan); | |
442 | dma_status = dmaengine_tx_status(dma->rx_chan, | |
443 | dma->rx_cookie, &state); | |
444 | if (dma_status == DMA_IN_PROGRESS || | |
445 | dma_status == DMA_PAUSED) { | |
446 | received = dma->rx_bytes_requested - state.residue; | |
447 | dmaengine_terminate_all(dma->rx_chan); | |
448 | s3c24xx_uart_copy_rx_to_tty(ourport, t, received); | |
449 | } | |
450 | } | |
b497549a BD |
451 | } |
452 | ||
ef4aca70 RB |
453 | static inline struct s3c24xx_uart_info |
454 | *s3c24xx_port_to_info(struct uart_port *port) | |
b497549a BD |
455 | { |
456 | return to_ourport(port)->info; | |
457 | } | |
458 | ||
ef4aca70 RB |
459 | static inline struct s3c2410_uartcfg |
460 | *s3c24xx_port_to_cfg(struct uart_port *port) | |
b497549a | 461 | { |
4d84e970 TA |
462 | struct s3c24xx_uart_port *ourport; |
463 | ||
b497549a BD |
464 | if (port->dev == NULL) |
465 | return NULL; | |
466 | ||
4d84e970 TA |
467 | ourport = container_of(port, struct s3c24xx_uart_port, port); |
468 | return ourport->cfg; | |
b497549a BD |
469 | } |
470 | ||
471 | static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, | |
472 | unsigned long ufstat) | |
473 | { | |
474 | struct s3c24xx_uart_info *info = ourport->info; | |
475 | ||
476 | if (ufstat & info->rx_fifofull) | |
da121506 | 477 | return ourport->port.fifosize; |
b497549a BD |
478 | |
479 | return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; | |
480 | } | |
481 | ||
b543c301 RB |
482 | static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport); |
483 | static void s3c24xx_serial_rx_dma_complete(void *args) | |
484 | { | |
485 | struct s3c24xx_uart_port *ourport = args; | |
486 | struct uart_port *port = &ourport->port; | |
487 | ||
488 | struct s3c24xx_uart_dma *dma = ourport->dma; | |
489 | struct tty_port *t = &port->state->port; | |
490 | struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); | |
491 | ||
492 | struct dma_tx_state state; | |
493 | unsigned long flags; | |
494 | int received; | |
495 | ||
496 | dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state); | |
497 | received = dma->rx_bytes_requested - state.residue; | |
498 | async_tx_ack(dma->rx_desc); | |
499 | ||
500 | spin_lock_irqsave(&port->lock, flags); | |
501 | ||
502 | if (received) | |
503 | s3c24xx_uart_copy_rx_to_tty(ourport, t, received); | |
504 | ||
505 | if (tty) { | |
506 | tty_flip_buffer_push(t); | |
507 | tty_kref_put(tty); | |
508 | } | |
509 | ||
510 | s3c64xx_start_rx_dma(ourport); | |
511 | ||
512 | spin_unlock_irqrestore(&port->lock, flags); | |
513 | } | |
514 | ||
515 | static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport) | |
516 | { | |
517 | struct s3c24xx_uart_dma *dma = ourport->dma; | |
518 | ||
519 | dma_sync_single_for_device(ourport->port.dev, dma->rx_addr, | |
520 | dma->rx_size, DMA_FROM_DEVICE); | |
521 | ||
522 | dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan, | |
523 | dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM, | |
524 | DMA_PREP_INTERRUPT); | |
525 | if (!dma->rx_desc) { | |
526 | dev_err(ourport->port.dev, "Unable to get desc for Rx\n"); | |
527 | return; | |
528 | } | |
529 | ||
530 | dma->rx_desc->callback = s3c24xx_serial_rx_dma_complete; | |
531 | dma->rx_desc->callback_param = ourport; | |
532 | dma->rx_bytes_requested = dma->rx_size; | |
533 | ||
534 | dma->rx_cookie = dmaengine_submit(dma->rx_desc); | |
535 | dma_async_issue_pending(dma->rx_chan); | |
536 | } | |
b497549a BD |
537 | |
538 | /* ? - where has parity gone?? */ | |
539 | #define S3C2410_UERSTAT_PARITY (0x1000) | |
540 | ||
b543c301 RB |
541 | static void enable_rx_dma(struct s3c24xx_uart_port *ourport) |
542 | { | |
543 | struct uart_port *port = &ourport->port; | |
544 | unsigned int ucon; | |
545 | ||
546 | /* set Rx mode to DMA mode */ | |
547 | ucon = rd_regl(port, S3C2410_UCON); | |
548 | ucon &= ~(S3C64XX_UCON_RXBURST_MASK | | |
549 | S3C64XX_UCON_TIMEOUT_MASK | | |
550 | S3C64XX_UCON_EMPTYINT_EN | | |
551 | S3C64XX_UCON_DMASUS_EN | | |
552 | S3C64XX_UCON_TIMEOUT_EN | | |
553 | S3C64XX_UCON_RXMODE_MASK); | |
554 | ucon |= S3C64XX_UCON_RXBURST_16 | | |
555 | 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | | |
556 | S3C64XX_UCON_EMPTYINT_EN | | |
557 | S3C64XX_UCON_TIMEOUT_EN | | |
558 | S3C64XX_UCON_RXMODE_DMA; | |
559 | wr_regl(port, S3C2410_UCON, ucon); | |
560 | ||
561 | ourport->rx_mode = S3C24XX_RX_DMA; | |
562 | } | |
563 | ||
564 | static void enable_rx_pio(struct s3c24xx_uart_port *ourport) | |
565 | { | |
566 | struct uart_port *port = &ourport->port; | |
567 | unsigned int ucon; | |
568 | ||
569 | /* set Rx mode to DMA mode */ | |
570 | ucon = rd_regl(port, S3C2410_UCON); | |
571 | ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK | | |
572 | S3C64XX_UCON_EMPTYINT_EN | | |
573 | S3C64XX_UCON_DMASUS_EN | | |
574 | S3C64XX_UCON_TIMEOUT_EN | | |
575 | S3C64XX_UCON_RXMODE_MASK); | |
576 | ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | | |
577 | S3C64XX_UCON_TIMEOUT_EN | | |
578 | S3C64XX_UCON_RXMODE_CPU; | |
579 | wr_regl(port, S3C2410_UCON, ucon); | |
580 | ||
581 | ourport->rx_mode = S3C24XX_RX_PIO; | |
582 | } | |
583 | ||
584 | static irqreturn_t s3c24xx_serial_rx_chars_dma(int irq, void *dev_id) | |
585 | { | |
586 | unsigned int utrstat, ufstat, received; | |
587 | struct s3c24xx_uart_port *ourport = dev_id; | |
588 | struct uart_port *port = &ourport->port; | |
589 | struct s3c24xx_uart_dma *dma = ourport->dma; | |
590 | struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); | |
591 | struct tty_port *t = &port->state->port; | |
592 | unsigned long flags; | |
593 | struct dma_tx_state state; | |
594 | ||
595 | utrstat = rd_regl(port, S3C2410_UTRSTAT); | |
596 | ufstat = rd_regl(port, S3C2410_UFSTAT); | |
597 | ||
598 | spin_lock_irqsave(&port->lock, flags); | |
599 | ||
600 | if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) { | |
601 | s3c64xx_start_rx_dma(ourport); | |
602 | if (ourport->rx_mode == S3C24XX_RX_PIO) | |
603 | enable_rx_dma(ourport); | |
604 | goto finish; | |
605 | } | |
606 | ||
607 | if (ourport->rx_mode == S3C24XX_RX_DMA) { | |
608 | dmaengine_pause(dma->rx_chan); | |
609 | dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state); | |
610 | dmaengine_terminate_all(dma->rx_chan); | |
611 | received = dma->rx_bytes_requested - state.residue; | |
612 | s3c24xx_uart_copy_rx_to_tty(ourport, t, received); | |
613 | ||
614 | enable_rx_pio(ourport); | |
615 | } | |
616 | ||
617 | uart_rx_drain_fifo(ourport); | |
618 | ||
619 | if (tty) { | |
620 | tty_flip_buffer_push(t); | |
621 | tty_kref_put(tty); | |
622 | } | |
623 | ||
624 | wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT); | |
625 | ||
626 | finish: | |
627 | spin_unlock_irqrestore(&port->lock, flags); | |
628 | ||
629 | return IRQ_HANDLED; | |
630 | } | |
631 | ||
632 | static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id) | |
b497549a BD |
633 | { |
634 | struct s3c24xx_uart_port *ourport = dev_id; | |
635 | struct uart_port *port = &ourport->port; | |
b497549a | 636 | unsigned int ufcon, ch, flag, ufstat, uerstat; |
c15c3747 | 637 | unsigned long flags; |
57850a50 | 638 | int max_count = port->fifosize; |
b497549a | 639 | |
c15c3747 TA |
640 | spin_lock_irqsave(&port->lock, flags); |
641 | ||
b497549a BD |
642 | while (max_count-- > 0) { |
643 | ufcon = rd_regl(port, S3C2410_UFCON); | |
644 | ufstat = rd_regl(port, S3C2410_UFSTAT); | |
645 | ||
646 | if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0) | |
647 | break; | |
648 | ||
649 | uerstat = rd_regl(port, S3C2410_UERSTAT); | |
650 | ch = rd_regb(port, S3C2410_URXH); | |
651 | ||
652 | if (port->flags & UPF_CONS_FLOW) { | |
653 | int txe = s3c24xx_serial_txempty_nofifo(port); | |
654 | ||
655 | if (rx_enabled(port)) { | |
656 | if (!txe) { | |
657 | rx_enabled(port) = 0; | |
658 | continue; | |
659 | } | |
660 | } else { | |
661 | if (txe) { | |
662 | ufcon |= S3C2410_UFCON_RESETRX; | |
663 | wr_regl(port, S3C2410_UFCON, ufcon); | |
664 | rx_enabled(port) = 1; | |
f5693ea2 VK |
665 | spin_unlock_irqrestore(&port->lock, |
666 | flags); | |
b497549a BD |
667 | goto out; |
668 | } | |
669 | continue; | |
670 | } | |
671 | } | |
672 | ||
673 | /* insert the character into the buffer */ | |
674 | ||
675 | flag = TTY_NORMAL; | |
676 | port->icount.rx++; | |
677 | ||
678 | if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) { | |
679 | dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n", | |
680 | ch, uerstat); | |
681 | ||
682 | /* check for break */ | |
683 | if (uerstat & S3C2410_UERSTAT_BREAK) { | |
684 | dbg("break!\n"); | |
685 | port->icount.brk++; | |
686 | if (uart_handle_break(port)) | |
9303ac15 | 687 | goto ignore_char; |
b497549a BD |
688 | } |
689 | ||
690 | if (uerstat & S3C2410_UERSTAT_FRAME) | |
691 | port->icount.frame++; | |
692 | if (uerstat & S3C2410_UERSTAT_OVERRUN) | |
693 | port->icount.overrun++; | |
694 | ||
695 | uerstat &= port->read_status_mask; | |
696 | ||
697 | if (uerstat & S3C2410_UERSTAT_BREAK) | |
698 | flag = TTY_BREAK; | |
699 | else if (uerstat & S3C2410_UERSTAT_PARITY) | |
700 | flag = TTY_PARITY; | |
701 | else if (uerstat & (S3C2410_UERSTAT_FRAME | | |
702 | S3C2410_UERSTAT_OVERRUN)) | |
703 | flag = TTY_FRAME; | |
704 | } | |
705 | ||
706 | if (uart_handle_sysrq_char(port, ch)) | |
707 | goto ignore_char; | |
708 | ||
709 | uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, | |
710 | ch, flag); | |
711 | ||
ef4aca70 | 712 | ignore_char: |
b497549a BD |
713 | continue; |
714 | } | |
f5693ea2 VK |
715 | |
716 | spin_unlock_irqrestore(&port->lock, flags); | |
2e124b4a | 717 | tty_flip_buffer_push(&port->state->port); |
b497549a | 718 | |
ef4aca70 | 719 | out: |
b497549a BD |
720 | return IRQ_HANDLED; |
721 | } | |
722 | ||
b543c301 RB |
723 | |
724 | static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id) | |
725 | { | |
726 | struct s3c24xx_uart_port *ourport = dev_id; | |
727 | ||
728 | if (ourport->dma && ourport->dma->rx_chan) | |
729 | return s3c24xx_serial_rx_chars_dma(irq, dev_id); | |
730 | return s3c24xx_serial_rx_chars_pio(irq, dev_id); | |
731 | } | |
732 | ||
b497549a BD |
733 | static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) |
734 | { | |
735 | struct s3c24xx_uart_port *ourport = id; | |
736 | struct uart_port *port = &ourport->port; | |
ebd2c8f6 | 737 | struct circ_buf *xmit = &port->state->xmit; |
c15c3747 | 738 | unsigned long flags; |
29bef799 | 739 | int count; |
b497549a | 740 | |
c15c3747 TA |
741 | spin_lock_irqsave(&port->lock, flags); |
742 | ||
29bef799 RB |
743 | count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); |
744 | ||
745 | if (ourport->dma && ourport->dma->tx_chan && count >= port->fifosize) { | |
746 | s3c24xx_serial_start_tx_dma(ourport, count); | |
747 | goto out; | |
748 | } | |
749 | ||
b497549a BD |
750 | if (port->x_char) { |
751 | wr_regb(port, S3C2410_UTXH, port->x_char); | |
752 | port->icount.tx++; | |
753 | port->x_char = 0; | |
754 | goto out; | |
755 | } | |
756 | ||
25985edc | 757 | /* if there isn't anything more to transmit, or the uart is now |
b497549a BD |
758 | * stopped, disable the uart and exit |
759 | */ | |
760 | ||
761 | if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { | |
762 | s3c24xx_serial_stop_tx(port); | |
763 | goto out; | |
764 | } | |
765 | ||
766 | /* try and drain the buffer... */ | |
767 | ||
29bef799 | 768 | count = port->fifosize; |
b497549a BD |
769 | while (!uart_circ_empty(xmit) && count-- > 0) { |
770 | if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) | |
771 | break; | |
772 | ||
773 | wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]); | |
774 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
775 | port->icount.tx++; | |
776 | } | |
777 | ||
c15c3747 TA |
778 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) { |
779 | spin_unlock(&port->lock); | |
b497549a | 780 | uart_write_wakeup(port); |
c15c3747 TA |
781 | spin_lock(&port->lock); |
782 | } | |
b497549a BD |
783 | |
784 | if (uart_circ_empty(xmit)) | |
785 | s3c24xx_serial_stop_tx(port); | |
786 | ||
ef4aca70 | 787 | out: |
c15c3747 | 788 | spin_unlock_irqrestore(&port->lock, flags); |
b497549a BD |
789 | return IRQ_HANDLED; |
790 | } | |
791 | ||
88bb4ea1 TA |
792 | /* interrupt handler for s3c64xx and later SoC's.*/ |
793 | static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id) | |
794 | { | |
795 | struct s3c24xx_uart_port *ourport = id; | |
796 | struct uart_port *port = &ourport->port; | |
797 | unsigned int pend = rd_regl(port, S3C64XX_UINTP); | |
88bb4ea1 TA |
798 | irqreturn_t ret = IRQ_HANDLED; |
799 | ||
88bb4ea1 TA |
800 | if (pend & S3C64XX_UINTM_RXD_MSK) { |
801 | ret = s3c24xx_serial_rx_chars(irq, id); | |
802 | wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK); | |
803 | } | |
804 | if (pend & S3C64XX_UINTM_TXD_MSK) { | |
805 | ret = s3c24xx_serial_tx_chars(irq, id); | |
806 | wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK); | |
807 | } | |
88bb4ea1 TA |
808 | return ret; |
809 | } | |
810 | ||
b497549a BD |
811 | static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) |
812 | { | |
813 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
814 | unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT); | |
815 | unsigned long ufcon = rd_regl(port, S3C2410_UFCON); | |
816 | ||
817 | if (ufcon & S3C2410_UFCON_FIFOMODE) { | |
818 | if ((ufstat & info->tx_fifomask) != 0 || | |
819 | (ufstat & info->tx_fifofull)) | |
820 | return 0; | |
821 | ||
822 | return 1; | |
823 | } | |
824 | ||
825 | return s3c24xx_serial_txempty_nofifo(port); | |
826 | } | |
827 | ||
828 | /* no modem control lines */ | |
829 | static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) | |
830 | { | |
831 | unsigned int umstat = rd_regb(port, S3C2410_UMSTAT); | |
832 | ||
833 | if (umstat & S3C2410_UMSTAT_CTS) | |
834 | return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; | |
835 | else | |
836 | return TIOCM_CAR | TIOCM_DSR; | |
837 | } | |
838 | ||
839 | static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
840 | { | |
2d1e5a48 JMG |
841 | unsigned int umcon = rd_regl(port, S3C2410_UMCON); |
842 | ||
843 | if (mctrl & TIOCM_RTS) | |
844 | umcon |= S3C2410_UMCOM_RTS_LOW; | |
845 | else | |
846 | umcon &= ~S3C2410_UMCOM_RTS_LOW; | |
847 | ||
848 | wr_regl(port, S3C2410_UMCON, umcon); | |
b497549a BD |
849 | } |
850 | ||
851 | static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) | |
852 | { | |
853 | unsigned long flags; | |
854 | unsigned int ucon; | |
855 | ||
856 | spin_lock_irqsave(&port->lock, flags); | |
857 | ||
858 | ucon = rd_regl(port, S3C2410_UCON); | |
859 | ||
860 | if (break_state) | |
861 | ucon |= S3C2410_UCON_SBREAK; | |
862 | else | |
863 | ucon &= ~S3C2410_UCON_SBREAK; | |
864 | ||
865 | wr_regl(port, S3C2410_UCON, ucon); | |
866 | ||
867 | spin_unlock_irqrestore(&port->lock, flags); | |
868 | } | |
869 | ||
62c37eed RB |
870 | static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) |
871 | { | |
872 | struct s3c24xx_uart_dma *dma = p->dma; | |
873 | dma_cap_mask_t mask; | |
874 | unsigned long flags; | |
875 | ||
876 | /* Default slave configuration parameters */ | |
877 | dma->rx_conf.direction = DMA_DEV_TO_MEM; | |
878 | dma->rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; | |
879 | dma->rx_conf.src_addr = p->port.mapbase + S3C2410_URXH; | |
880 | dma->rx_conf.src_maxburst = 16; | |
881 | ||
882 | dma->tx_conf.direction = DMA_MEM_TO_DEV; | |
883 | dma->tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; | |
884 | dma->tx_conf.dst_addr = p->port.mapbase + S3C2410_UTXH; | |
885 | if (dma_get_cache_alignment() >= 16) | |
886 | dma->tx_conf.dst_maxburst = 16; | |
887 | else | |
888 | dma->tx_conf.dst_maxburst = 1; | |
889 | ||
890 | dma_cap_zero(mask); | |
891 | dma_cap_set(DMA_SLAVE, mask); | |
892 | ||
893 | dma->rx_chan = dma_request_slave_channel_compat(mask, dma->fn, | |
894 | dma->rx_param, p->port.dev, "rx"); | |
895 | if (!dma->rx_chan) | |
896 | return -ENODEV; | |
897 | ||
898 | dmaengine_slave_config(dma->rx_chan, &dma->rx_conf); | |
899 | ||
900 | dma->tx_chan = dma_request_slave_channel_compat(mask, dma->fn, | |
901 | dma->tx_param, p->port.dev, "tx"); | |
902 | if (!dma->tx_chan) { | |
903 | dma_release_channel(dma->rx_chan); | |
904 | return -ENODEV; | |
905 | } | |
906 | ||
907 | dmaengine_slave_config(dma->tx_chan, &dma->tx_conf); | |
908 | ||
909 | /* RX buffer */ | |
910 | dma->rx_size = PAGE_SIZE; | |
911 | ||
912 | dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL); | |
913 | ||
914 | if (!dma->rx_buf) { | |
915 | dma_release_channel(dma->rx_chan); | |
916 | dma_release_channel(dma->tx_chan); | |
917 | return -ENOMEM; | |
918 | } | |
919 | ||
920 | dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf, | |
921 | dma->rx_size, DMA_FROM_DEVICE); | |
922 | ||
923 | spin_lock_irqsave(&p->port.lock, flags); | |
924 | ||
925 | /* TX buffer */ | |
926 | dma->tx_addr = dma_map_single(dma->tx_chan->device->dev, | |
927 | p->port.state->xmit.buf, | |
928 | UART_XMIT_SIZE, DMA_TO_DEVICE); | |
929 | ||
930 | spin_unlock_irqrestore(&p->port.lock, flags); | |
931 | ||
932 | return 0; | |
933 | } | |
934 | ||
935 | static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) | |
936 | { | |
937 | struct s3c24xx_uart_dma *dma = p->dma; | |
938 | ||
939 | if (dma->rx_chan) { | |
940 | dmaengine_terminate_all(dma->rx_chan); | |
941 | dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr, | |
942 | dma->rx_size, DMA_FROM_DEVICE); | |
943 | kfree(dma->rx_buf); | |
944 | dma_release_channel(dma->rx_chan); | |
945 | dma->rx_chan = NULL; | |
946 | } | |
947 | ||
948 | if (dma->tx_chan) { | |
949 | dmaengine_terminate_all(dma->tx_chan); | |
950 | dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr, | |
951 | UART_XMIT_SIZE, DMA_TO_DEVICE); | |
952 | dma_release_channel(dma->tx_chan); | |
953 | dma->tx_chan = NULL; | |
954 | } | |
955 | } | |
956 | ||
b497549a BD |
957 | static void s3c24xx_serial_shutdown(struct uart_port *port) |
958 | { | |
959 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
960 | ||
961 | if (ourport->tx_claimed) { | |
88bb4ea1 TA |
962 | if (!s3c24xx_serial_has_interrupt_mask(port)) |
963 | free_irq(ourport->tx_irq, ourport); | |
b497549a BD |
964 | tx_enabled(port) = 0; |
965 | ourport->tx_claimed = 0; | |
966 | } | |
967 | ||
968 | if (ourport->rx_claimed) { | |
88bb4ea1 TA |
969 | if (!s3c24xx_serial_has_interrupt_mask(port)) |
970 | free_irq(ourport->rx_irq, ourport); | |
b497549a BD |
971 | ourport->rx_claimed = 0; |
972 | rx_enabled(port) = 0; | |
973 | } | |
b497549a | 974 | |
88bb4ea1 TA |
975 | /* Clear pending interrupts and mask all interrupts */ |
976 | if (s3c24xx_serial_has_interrupt_mask(port)) { | |
b6ad2935 TF |
977 | free_irq(port->irq, ourport); |
978 | ||
88bb4ea1 TA |
979 | wr_regl(port, S3C64XX_UINTP, 0xf); |
980 | wr_regl(port, S3C64XX_UINTM, 0xf); | |
981 | } | |
62c37eed RB |
982 | |
983 | if (ourport->dma) | |
984 | s3c24xx_serial_release_dma(ourport); | |
985 | ||
29bef799 | 986 | ourport->tx_in_progress = 0; |
88bb4ea1 | 987 | } |
b497549a BD |
988 | |
989 | static int s3c24xx_serial_startup(struct uart_port *port) | |
990 | { | |
991 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
992 | int ret; | |
993 | ||
e4ac92df JP |
994 | dbg("s3c24xx_serial_startup: port=%p (%08llx,%p)\n", |
995 | port, (unsigned long long)port->mapbase, port->membase); | |
b497549a BD |
996 | |
997 | rx_enabled(port) = 1; | |
998 | ||
b73c289c | 999 | ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0, |
b497549a BD |
1000 | s3c24xx_serial_portname(port), ourport); |
1001 | ||
1002 | if (ret != 0) { | |
d20925e1 | 1003 | dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq); |
b497549a BD |
1004 | return ret; |
1005 | } | |
1006 | ||
1007 | ourport->rx_claimed = 1; | |
1008 | ||
1009 | dbg("requesting tx irq...\n"); | |
1010 | ||
1011 | tx_enabled(port) = 1; | |
1012 | ||
b73c289c | 1013 | ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0, |
b497549a BD |
1014 | s3c24xx_serial_portname(port), ourport); |
1015 | ||
1016 | if (ret) { | |
d20925e1 | 1017 | dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq); |
b497549a BD |
1018 | goto err; |
1019 | } | |
1020 | ||
1021 | ourport->tx_claimed = 1; | |
1022 | ||
1023 | dbg("s3c24xx_serial_startup ok\n"); | |
1024 | ||
1025 | /* the port reset code should have done the correct | |
1026 | * register setup for the port controls */ | |
1027 | ||
1028 | return ret; | |
1029 | ||
ef4aca70 | 1030 | err: |
b497549a BD |
1031 | s3c24xx_serial_shutdown(port); |
1032 | return ret; | |
1033 | } | |
1034 | ||
88bb4ea1 TA |
1035 | static int s3c64xx_serial_startup(struct uart_port *port) |
1036 | { | |
1037 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
b543c301 RB |
1038 | unsigned long flags; |
1039 | unsigned int ufcon; | |
88bb4ea1 TA |
1040 | int ret; |
1041 | ||
e4ac92df JP |
1042 | dbg("s3c64xx_serial_startup: port=%p (%08llx,%p)\n", |
1043 | port, (unsigned long long)port->mapbase, port->membase); | |
88bb4ea1 | 1044 | |
b6ad2935 | 1045 | wr_regl(port, S3C64XX_UINTM, 0xf); |
62c37eed RB |
1046 | if (ourport->dma) { |
1047 | ret = s3c24xx_serial_request_dma(ourport); | |
1048 | if (ret < 0) { | |
1049 | dev_warn(port->dev, "DMA request failed\n"); | |
1050 | return ret; | |
1051 | } | |
1052 | } | |
b6ad2935 | 1053 | |
88bb4ea1 TA |
1054 | ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED, |
1055 | s3c24xx_serial_portname(port), ourport); | |
1056 | if (ret) { | |
d20925e1 | 1057 | dev_err(port->dev, "cannot get irq %d\n", port->irq); |
88bb4ea1 TA |
1058 | return ret; |
1059 | } | |
1060 | ||
1061 | /* For compatibility with s3c24xx Soc's */ | |
1062 | rx_enabled(port) = 1; | |
1063 | ourport->rx_claimed = 1; | |
1064 | tx_enabled(port) = 0; | |
1065 | ourport->tx_claimed = 1; | |
1066 | ||
29bef799 RB |
1067 | spin_lock_irqsave(&port->lock, flags); |
1068 | ||
1069 | ufcon = rd_regl(port, S3C2410_UFCON); | |
b543c301 RB |
1070 | ufcon |= S3C2410_UFCON_RESETRX | S3C2410_UFCON_RESETTX | |
1071 | S5PV210_UFCON_RXTRIG8; | |
29bef799 RB |
1072 | wr_regl(port, S3C2410_UFCON, ufcon); |
1073 | ||
1074 | enable_rx_pio(ourport); | |
1075 | ||
1076 | spin_unlock_irqrestore(&port->lock, flags); | |
1077 | ||
88bb4ea1 TA |
1078 | /* Enable Rx Interrupt */ |
1079 | __clear_bit(S3C64XX_UINTM_RXD, portaddrl(port, S3C64XX_UINTM)); | |
29bef799 | 1080 | |
88bb4ea1 TA |
1081 | dbg("s3c64xx_serial_startup ok\n"); |
1082 | return ret; | |
1083 | } | |
1084 | ||
b497549a BD |
1085 | /* power power management control */ |
1086 | ||
1087 | static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, | |
1088 | unsigned int old) | |
1089 | { | |
1090 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
1ff383a4 | 1091 | int timeout = 10000; |
b497549a | 1092 | |
30555476 BD |
1093 | ourport->pm_level = level; |
1094 | ||
b497549a BD |
1095 | switch (level) { |
1096 | case 3: | |
1ff383a4 RB |
1097 | while (--timeout && !s3c24xx_serial_txempty_nofifo(port)) |
1098 | udelay(100); | |
1099 | ||
7cd88831 | 1100 | if (!IS_ERR(ourport->baudclk)) |
9484b009 | 1101 | clk_disable_unprepare(ourport->baudclk); |
b497549a | 1102 | |
9484b009 | 1103 | clk_disable_unprepare(ourport->clk); |
b497549a BD |
1104 | break; |
1105 | ||
1106 | case 0: | |
9484b009 | 1107 | clk_prepare_enable(ourport->clk); |
b497549a | 1108 | |
7cd88831 | 1109 | if (!IS_ERR(ourport->baudclk)) |
9484b009 | 1110 | clk_prepare_enable(ourport->baudclk); |
b497549a BD |
1111 | |
1112 | break; | |
1113 | default: | |
d20925e1 | 1114 | dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level); |
b497549a BD |
1115 | } |
1116 | } | |
1117 | ||
1118 | /* baud rate calculation | |
1119 | * | |
1120 | * The UARTs on the S3C2410/S3C2440 can take their clocks from a number | |
1121 | * of different sources, including the peripheral clock ("pclk") and an | |
1122 | * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk") | |
1123 | * with a programmable extra divisor. | |
1124 | * | |
1125 | * The following code goes through the clock sources, and calculates the | |
1126 | * baud clocks (and the resultant actual baud rates) and then tries to | |
1127 | * pick the closest one and select that. | |
1128 | * | |
1129 | */ | |
1130 | ||
5f5a7a55 | 1131 | #define MAX_CLK_NAME_LENGTH 15 |
b497549a | 1132 | |
5f5a7a55 | 1133 | static inline int s3c24xx_serial_getsource(struct uart_port *port) |
b497549a BD |
1134 | { |
1135 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
5f5a7a55 | 1136 | unsigned int ucon; |
b497549a | 1137 | |
5f5a7a55 TA |
1138 | if (info->num_clks == 1) |
1139 | return 0; | |
b497549a | 1140 | |
5f5a7a55 TA |
1141 | ucon = rd_regl(port, S3C2410_UCON); |
1142 | ucon &= info->clksel_mask; | |
1143 | return ucon >> info->clksel_shift; | |
b497549a BD |
1144 | } |
1145 | ||
5f5a7a55 TA |
1146 | static void s3c24xx_serial_setsource(struct uart_port *port, |
1147 | unsigned int clk_sel) | |
b497549a | 1148 | { |
5f5a7a55 TA |
1149 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); |
1150 | unsigned int ucon; | |
b497549a | 1151 | |
5f5a7a55 TA |
1152 | if (info->num_clks == 1) |
1153 | return; | |
090f848d | 1154 | |
5f5a7a55 TA |
1155 | ucon = rd_regl(port, S3C2410_UCON); |
1156 | if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel) | |
1157 | return; | |
b497549a | 1158 | |
5f5a7a55 TA |
1159 | ucon &= ~info->clksel_mask; |
1160 | ucon |= clk_sel << info->clksel_shift; | |
1161 | wr_regl(port, S3C2410_UCON, ucon); | |
b497549a BD |
1162 | } |
1163 | ||
5f5a7a55 TA |
1164 | static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, |
1165 | unsigned int req_baud, struct clk **best_clk, | |
1166 | unsigned int *clk_num) | |
b497549a | 1167 | { |
5f5a7a55 TA |
1168 | struct s3c24xx_uart_info *info = ourport->info; |
1169 | struct clk *clk; | |
1170 | unsigned long rate; | |
1171 | unsigned int cnt, baud, quot, clk_sel, best_quot = 0; | |
1172 | char clkname[MAX_CLK_NAME_LENGTH]; | |
1173 | int calc_deviation, deviation = (1 << 30) - 1; | |
1174 | ||
5f5a7a55 TA |
1175 | clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel : |
1176 | ourport->info->def_clk_sel; | |
1177 | for (cnt = 0; cnt < info->num_clks; cnt++) { | |
1178 | if (!(clk_sel & (1 << cnt))) | |
1179 | continue; | |
1180 | ||
1181 | sprintf(clkname, "clk_uart_baud%d", cnt); | |
1182 | clk = clk_get(ourport->port.dev, clkname); | |
7cd88831 | 1183 | if (IS_ERR(clk)) |
5f5a7a55 TA |
1184 | continue; |
1185 | ||
1186 | rate = clk_get_rate(clk); | |
1187 | if (!rate) | |
1188 | continue; | |
1189 | ||
1190 | if (ourport->info->has_divslot) { | |
1191 | unsigned long div = rate / req_baud; | |
1192 | ||
1193 | /* The UDIVSLOT register on the newer UARTs allows us to | |
1194 | * get a divisor adjustment of 1/16th on the baud clock. | |
1195 | * | |
1196 | * We don't keep the UDIVSLOT value (the 16ths we | |
1197 | * calculated by not multiplying the baud by 16) as it | |
1198 | * is easy enough to recalculate. | |
1199 | */ | |
1200 | ||
1201 | quot = div / 16; | |
1202 | baud = rate / div; | |
1203 | } else { | |
1204 | quot = (rate + (8 * req_baud)) / (16 * req_baud); | |
1205 | baud = rate / (quot * 16); | |
b497549a | 1206 | } |
5f5a7a55 | 1207 | quot--; |
b497549a | 1208 | |
5f5a7a55 TA |
1209 | calc_deviation = req_baud - baud; |
1210 | if (calc_deviation < 0) | |
1211 | calc_deviation = -calc_deviation; | |
b497549a | 1212 | |
5f5a7a55 TA |
1213 | if (calc_deviation < deviation) { |
1214 | *best_clk = clk; | |
1215 | best_quot = quot; | |
1216 | *clk_num = cnt; | |
1217 | deviation = calc_deviation; | |
b497549a BD |
1218 | } |
1219 | } | |
1220 | ||
5f5a7a55 | 1221 | return best_quot; |
b497549a BD |
1222 | } |
1223 | ||
090f848d BD |
1224 | /* udivslot_table[] |
1225 | * | |
1226 | * This table takes the fractional value of the baud divisor and gives | |
1227 | * the recommended setting for the UDIVSLOT register. | |
1228 | */ | |
1229 | static u16 udivslot_table[16] = { | |
1230 | [0] = 0x0000, | |
1231 | [1] = 0x0080, | |
1232 | [2] = 0x0808, | |
1233 | [3] = 0x0888, | |
1234 | [4] = 0x2222, | |
1235 | [5] = 0x4924, | |
1236 | [6] = 0x4A52, | |
1237 | [7] = 0x54AA, | |
1238 | [8] = 0x5555, | |
1239 | [9] = 0xD555, | |
1240 | [10] = 0xD5D5, | |
1241 | [11] = 0xDDD5, | |
1242 | [12] = 0xDDDD, | |
1243 | [13] = 0xDFDD, | |
1244 | [14] = 0xDFDF, | |
1245 | [15] = 0xFFDF, | |
1246 | }; | |
1247 | ||
b497549a BD |
1248 | static void s3c24xx_serial_set_termios(struct uart_port *port, |
1249 | struct ktermios *termios, | |
1250 | struct ktermios *old) | |
1251 | { | |
1252 | struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); | |
1253 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
7cd88831 | 1254 | struct clk *clk = ERR_PTR(-EINVAL); |
b497549a | 1255 | unsigned long flags; |
5f5a7a55 | 1256 | unsigned int baud, quot, clk_sel = 0; |
b497549a BD |
1257 | unsigned int ulcon; |
1258 | unsigned int umcon; | |
090f848d | 1259 | unsigned int udivslot = 0; |
b497549a BD |
1260 | |
1261 | /* | |
1262 | * We don't support modem control lines. | |
1263 | */ | |
1264 | termios->c_cflag &= ~(HUPCL | CMSPAR); | |
1265 | termios->c_cflag |= CLOCAL; | |
1266 | ||
1267 | /* | |
1268 | * Ask the core to calculate the divisor for us. | |
1269 | */ | |
1270 | ||
1271 | baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); | |
5f5a7a55 | 1272 | quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel); |
b497549a BD |
1273 | if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) |
1274 | quot = port->custom_divisor; | |
7cd88831 | 1275 | if (IS_ERR(clk)) |
5f5a7a55 | 1276 | return; |
b497549a BD |
1277 | |
1278 | /* check to see if we need to change clock source */ | |
1279 | ||
5f5a7a55 TA |
1280 | if (ourport->baudclk != clk) { |
1281 | s3c24xx_serial_setsource(port, clk_sel); | |
b497549a | 1282 | |
7cd88831 | 1283 | if (!IS_ERR(ourport->baudclk)) { |
9484b009 | 1284 | clk_disable_unprepare(ourport->baudclk); |
7cd88831 | 1285 | ourport->baudclk = ERR_PTR(-EINVAL); |
b497549a BD |
1286 | } |
1287 | ||
9484b009 | 1288 | clk_prepare_enable(clk); |
b497549a | 1289 | |
b497549a | 1290 | ourport->baudclk = clk; |
30555476 | 1291 | ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; |
b497549a BD |
1292 | } |
1293 | ||
090f848d BD |
1294 | if (ourport->info->has_divslot) { |
1295 | unsigned int div = ourport->baudclk_rate / baud; | |
1296 | ||
8b526ae4 JL |
1297 | if (cfg->has_fracval) { |
1298 | udivslot = (div & 15); | |
1299 | dbg("fracval = %04x\n", udivslot); | |
1300 | } else { | |
1301 | udivslot = udivslot_table[div & 15]; | |
1302 | dbg("udivslot = %04x (div %d)\n", udivslot, div & 15); | |
1303 | } | |
090f848d BD |
1304 | } |
1305 | ||
b497549a BD |
1306 | switch (termios->c_cflag & CSIZE) { |
1307 | case CS5: | |
1308 | dbg("config: 5bits/char\n"); | |
1309 | ulcon = S3C2410_LCON_CS5; | |
1310 | break; | |
1311 | case CS6: | |
1312 | dbg("config: 6bits/char\n"); | |
1313 | ulcon = S3C2410_LCON_CS6; | |
1314 | break; | |
1315 | case CS7: | |
1316 | dbg("config: 7bits/char\n"); | |
1317 | ulcon = S3C2410_LCON_CS7; | |
1318 | break; | |
1319 | case CS8: | |
1320 | default: | |
1321 | dbg("config: 8bits/char\n"); | |
1322 | ulcon = S3C2410_LCON_CS8; | |
1323 | break; | |
1324 | } | |
1325 | ||
1326 | /* preserve original lcon IR settings */ | |
1327 | ulcon |= (cfg->ulcon & S3C2410_LCON_IRM); | |
1328 | ||
1329 | if (termios->c_cflag & CSTOPB) | |
1330 | ulcon |= S3C2410_LCON_STOPB; | |
1331 | ||
b497549a BD |
1332 | if (termios->c_cflag & PARENB) { |
1333 | if (termios->c_cflag & PARODD) | |
1334 | ulcon |= S3C2410_LCON_PODD; | |
1335 | else | |
1336 | ulcon |= S3C2410_LCON_PEVEN; | |
1337 | } else { | |
1338 | ulcon |= S3C2410_LCON_PNONE; | |
1339 | } | |
1340 | ||
1341 | spin_lock_irqsave(&port->lock, flags); | |
1342 | ||
090f848d BD |
1343 | dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n", |
1344 | ulcon, quot, udivslot); | |
b497549a BD |
1345 | |
1346 | wr_regl(port, S3C2410_ULCON, ulcon); | |
1347 | wr_regl(port, S3C2410_UBRDIV, quot); | |
2d1e5a48 JMG |
1348 | |
1349 | umcon = rd_regl(port, S3C2410_UMCON); | |
1350 | if (termios->c_cflag & CRTSCTS) { | |
1351 | umcon |= S3C2410_UMCOM_AFC; | |
1352 | /* Disable RTS when RX FIFO contains 63 bytes */ | |
1353 | umcon &= ~S3C2412_UMCON_AFC_8; | |
1354 | } else { | |
1355 | umcon &= ~S3C2410_UMCOM_AFC; | |
1356 | } | |
b497549a BD |
1357 | wr_regl(port, S3C2410_UMCON, umcon); |
1358 | ||
090f848d BD |
1359 | if (ourport->info->has_divslot) |
1360 | wr_regl(port, S3C2443_DIVSLOT, udivslot); | |
1361 | ||
b497549a BD |
1362 | dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", |
1363 | rd_regl(port, S3C2410_ULCON), | |
1364 | rd_regl(port, S3C2410_UCON), | |
1365 | rd_regl(port, S3C2410_UFCON)); | |
1366 | ||
1367 | /* | |
1368 | * Update the per-port timeout. | |
1369 | */ | |
1370 | uart_update_timeout(port, termios->c_cflag, baud); | |
1371 | ||
1372 | /* | |
1373 | * Which character status flags are we interested in? | |
1374 | */ | |
1375 | port->read_status_mask = S3C2410_UERSTAT_OVERRUN; | |
1376 | if (termios->c_iflag & INPCK) | |
ef4aca70 RB |
1377 | port->read_status_mask |= S3C2410_UERSTAT_FRAME | |
1378 | S3C2410_UERSTAT_PARITY; | |
b497549a BD |
1379 | /* |
1380 | * Which character status flags should we ignore? | |
1381 | */ | |
1382 | port->ignore_status_mask = 0; | |
1383 | if (termios->c_iflag & IGNPAR) | |
1384 | port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN; | |
1385 | if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) | |
1386 | port->ignore_status_mask |= S3C2410_UERSTAT_FRAME; | |
1387 | ||
1388 | /* | |
1389 | * Ignore all characters if CREAD is not set. | |
1390 | */ | |
1391 | if ((termios->c_cflag & CREAD) == 0) | |
1392 | port->ignore_status_mask |= RXSTAT_DUMMY_READ; | |
1393 | ||
1394 | spin_unlock_irqrestore(&port->lock, flags); | |
1395 | } | |
1396 | ||
1397 | static const char *s3c24xx_serial_type(struct uart_port *port) | |
1398 | { | |
1399 | switch (port->type) { | |
1400 | case PORT_S3C2410: | |
1401 | return "S3C2410"; | |
1402 | case PORT_S3C2440: | |
1403 | return "S3C2440"; | |
1404 | case PORT_S3C2412: | |
1405 | return "S3C2412"; | |
b690ace5 BD |
1406 | case PORT_S3C6400: |
1407 | return "S3C6400/10"; | |
b497549a BD |
1408 | default: |
1409 | return NULL; | |
1410 | } | |
1411 | } | |
1412 | ||
1413 | #define MAP_SIZE (0x100) | |
1414 | ||
1415 | static void s3c24xx_serial_release_port(struct uart_port *port) | |
1416 | { | |
1417 | release_mem_region(port->mapbase, MAP_SIZE); | |
1418 | } | |
1419 | ||
1420 | static int s3c24xx_serial_request_port(struct uart_port *port) | |
1421 | { | |
1422 | const char *name = s3c24xx_serial_portname(port); | |
1423 | return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY; | |
1424 | } | |
1425 | ||
1426 | static void s3c24xx_serial_config_port(struct uart_port *port, int flags) | |
1427 | { | |
1428 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
1429 | ||
1430 | if (flags & UART_CONFIG_TYPE && | |
1431 | s3c24xx_serial_request_port(port) == 0) | |
1432 | port->type = info->type; | |
1433 | } | |
1434 | ||
1435 | /* | |
1436 | * verify the new serial_struct (for TIOCSSERIAL). | |
1437 | */ | |
1438 | static int | |
1439 | s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) | |
1440 | { | |
1441 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
1442 | ||
1443 | if (ser->type != PORT_UNKNOWN && ser->type != info->type) | |
1444 | return -EINVAL; | |
1445 | ||
1446 | return 0; | |
1447 | } | |
1448 | ||
1449 | ||
1450 | #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE | |
1451 | ||
1452 | static struct console s3c24xx_serial_console; | |
1453 | ||
93b5c032 JP |
1454 | static int __init s3c24xx_serial_console_init(void) |
1455 | { | |
1456 | register_console(&s3c24xx_serial_console); | |
1457 | return 0; | |
1458 | } | |
1459 | console_initcall(s3c24xx_serial_console_init); | |
1460 | ||
b497549a BD |
1461 | #define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console |
1462 | #else | |
1463 | #define S3C24XX_SERIAL_CONSOLE NULL | |
1464 | #endif | |
1465 | ||
84f57d9e | 1466 | #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) |
93b5c032 JP |
1467 | static int s3c24xx_serial_get_poll_char(struct uart_port *port); |
1468 | static void s3c24xx_serial_put_poll_char(struct uart_port *port, | |
1469 | unsigned char c); | |
1470 | #endif | |
1471 | ||
b497549a BD |
1472 | static struct uart_ops s3c24xx_serial_ops = { |
1473 | .pm = s3c24xx_serial_pm, | |
1474 | .tx_empty = s3c24xx_serial_tx_empty, | |
1475 | .get_mctrl = s3c24xx_serial_get_mctrl, | |
1476 | .set_mctrl = s3c24xx_serial_set_mctrl, | |
1477 | .stop_tx = s3c24xx_serial_stop_tx, | |
1478 | .start_tx = s3c24xx_serial_start_tx, | |
1479 | .stop_rx = s3c24xx_serial_stop_rx, | |
b497549a BD |
1480 | .break_ctl = s3c24xx_serial_break_ctl, |
1481 | .startup = s3c24xx_serial_startup, | |
1482 | .shutdown = s3c24xx_serial_shutdown, | |
1483 | .set_termios = s3c24xx_serial_set_termios, | |
1484 | .type = s3c24xx_serial_type, | |
1485 | .release_port = s3c24xx_serial_release_port, | |
1486 | .request_port = s3c24xx_serial_request_port, | |
1487 | .config_port = s3c24xx_serial_config_port, | |
1488 | .verify_port = s3c24xx_serial_verify_port, | |
84f57d9e | 1489 | #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) |
93b5c032 JP |
1490 | .poll_get_char = s3c24xx_serial_get_poll_char, |
1491 | .poll_put_char = s3c24xx_serial_put_poll_char, | |
1492 | #endif | |
b497549a BD |
1493 | }; |
1494 | ||
b497549a BD |
1495 | static struct uart_driver s3c24xx_uart_drv = { |
1496 | .owner = THIS_MODULE, | |
2cf0c58e | 1497 | .driver_name = "s3c2410_serial", |
bdd4915a | 1498 | .nr = CONFIG_SERIAL_SAMSUNG_UARTS, |
b497549a | 1499 | .cons = S3C24XX_SERIAL_CONSOLE, |
2cf0c58e | 1500 | .dev_name = S3C24XX_SERIAL_NAME, |
b497549a BD |
1501 | .major = S3C24XX_SERIAL_MAJOR, |
1502 | .minor = S3C24XX_SERIAL_MINOR, | |
1503 | }; | |
1504 | ||
ef4aca70 RB |
1505 | #define __PORT_LOCK_UNLOCKED(i) \ |
1506 | __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[i].port.lock) | |
1507 | static struct s3c24xx_uart_port | |
1508 | s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = { | |
b497549a BD |
1509 | [0] = { |
1510 | .port = { | |
ef4aca70 | 1511 | .lock = __PORT_LOCK_UNLOCKED(0), |
b497549a | 1512 | .iotype = UPIO_MEM, |
b497549a BD |
1513 | .uartclk = 0, |
1514 | .fifosize = 16, | |
1515 | .ops = &s3c24xx_serial_ops, | |
1516 | .flags = UPF_BOOT_AUTOCONF, | |
1517 | .line = 0, | |
1518 | } | |
1519 | }, | |
1520 | [1] = { | |
1521 | .port = { | |
ef4aca70 | 1522 | .lock = __PORT_LOCK_UNLOCKED(1), |
b497549a | 1523 | .iotype = UPIO_MEM, |
b497549a BD |
1524 | .uartclk = 0, |
1525 | .fifosize = 16, | |
1526 | .ops = &s3c24xx_serial_ops, | |
1527 | .flags = UPF_BOOT_AUTOCONF, | |
1528 | .line = 1, | |
1529 | } | |
1530 | }, | |
03d5e77b | 1531 | #if CONFIG_SERIAL_SAMSUNG_UARTS > 2 |
b497549a BD |
1532 | |
1533 | [2] = { | |
1534 | .port = { | |
ef4aca70 | 1535 | .lock = __PORT_LOCK_UNLOCKED(2), |
b497549a | 1536 | .iotype = UPIO_MEM, |
b497549a BD |
1537 | .uartclk = 0, |
1538 | .fifosize = 16, | |
1539 | .ops = &s3c24xx_serial_ops, | |
1540 | .flags = UPF_BOOT_AUTOCONF, | |
1541 | .line = 2, | |
1542 | } | |
03d5e77b BD |
1543 | }, |
1544 | #endif | |
1545 | #if CONFIG_SERIAL_SAMSUNG_UARTS > 3 | |
1546 | [3] = { | |
1547 | .port = { | |
ef4aca70 | 1548 | .lock = __PORT_LOCK_UNLOCKED(3), |
03d5e77b | 1549 | .iotype = UPIO_MEM, |
03d5e77b BD |
1550 | .uartclk = 0, |
1551 | .fifosize = 16, | |
1552 | .ops = &s3c24xx_serial_ops, | |
1553 | .flags = UPF_BOOT_AUTOCONF, | |
1554 | .line = 3, | |
1555 | } | |
b497549a BD |
1556 | } |
1557 | #endif | |
1558 | }; | |
ef4aca70 | 1559 | #undef __PORT_LOCK_UNLOCKED |
b497549a BD |
1560 | |
1561 | /* s3c24xx_serial_resetport | |
1562 | * | |
0dfb3b41 | 1563 | * reset the fifos and other the settings. |
b497549a BD |
1564 | */ |
1565 | ||
0dfb3b41 TA |
1566 | static void s3c24xx_serial_resetport(struct uart_port *port, |
1567 | struct s3c2410_uartcfg *cfg) | |
b497549a BD |
1568 | { |
1569 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
0dfb3b41 TA |
1570 | unsigned long ucon = rd_regl(port, S3C2410_UCON); |
1571 | unsigned int ucon_mask; | |
b497549a | 1572 | |
0dfb3b41 TA |
1573 | ucon_mask = info->clksel_mask; |
1574 | if (info->type == PORT_S3C2440) | |
1575 | ucon_mask |= S3C2440_UCON0_DIVMASK; | |
1576 | ||
1577 | ucon &= ucon_mask; | |
1578 | wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); | |
1579 | ||
1580 | /* reset both fifos */ | |
1581 | wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); | |
1582 | wr_regl(port, S3C2410_UFCON, cfg->ufcon); | |
1583 | ||
1584 | /* some delay is required after fifo reset */ | |
1585 | udelay(1); | |
b497549a BD |
1586 | } |
1587 | ||
30555476 BD |
1588 | |
1589 | #ifdef CONFIG_CPU_FREQ | |
1590 | ||
1591 | static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, | |
1592 | unsigned long val, void *data) | |
1593 | { | |
1594 | struct s3c24xx_uart_port *port; | |
1595 | struct uart_port *uport; | |
1596 | ||
1597 | port = container_of(nb, struct s3c24xx_uart_port, freq_transition); | |
1598 | uport = &port->port; | |
1599 | ||
1600 | /* check to see if port is enabled */ | |
1601 | ||
1602 | if (port->pm_level != 0) | |
1603 | return 0; | |
1604 | ||
1605 | /* try and work out if the baudrate is changing, we can detect | |
1606 | * a change in rate, but we do not have support for detecting | |
1607 | * a disturbance in the clock-rate over the change. | |
1608 | */ | |
1609 | ||
25f04ad4 | 1610 | if (IS_ERR(port->baudclk)) |
30555476 BD |
1611 | goto exit; |
1612 | ||
25f04ad4 | 1613 | if (port->baudclk_rate == clk_get_rate(port->baudclk)) |
30555476 BD |
1614 | goto exit; |
1615 | ||
1616 | if (val == CPUFREQ_PRECHANGE) { | |
1617 | /* we should really shut the port down whilst the | |
1618 | * frequency change is in progress. */ | |
1619 | ||
1620 | } else if (val == CPUFREQ_POSTCHANGE) { | |
1621 | struct ktermios *termios; | |
1622 | struct tty_struct *tty; | |
1623 | ||
ebd2c8f6 | 1624 | if (uport->state == NULL) |
30555476 | 1625 | goto exit; |
30555476 | 1626 | |
ebd2c8f6 | 1627 | tty = uport->state->port.tty; |
30555476 | 1628 | |
7de40c21 | 1629 | if (tty == NULL) |
30555476 | 1630 | goto exit; |
30555476 | 1631 | |
adc8d746 | 1632 | termios = &tty->termios; |
30555476 BD |
1633 | |
1634 | if (termios == NULL) { | |
d20925e1 | 1635 | dev_warn(uport->dev, "%s: no termios?\n", __func__); |
30555476 BD |
1636 | goto exit; |
1637 | } | |
1638 | ||
1639 | s3c24xx_serial_set_termios(uport, termios, NULL); | |
1640 | } | |
1641 | ||
ef4aca70 | 1642 | exit: |
30555476 BD |
1643 | return 0; |
1644 | } | |
1645 | ||
ef4aca70 RB |
1646 | static inline int |
1647 | s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) | |
30555476 BD |
1648 | { |
1649 | port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition; | |
1650 | ||
1651 | return cpufreq_register_notifier(&port->freq_transition, | |
1652 | CPUFREQ_TRANSITION_NOTIFIER); | |
1653 | } | |
1654 | ||
ef4aca70 RB |
1655 | static inline void |
1656 | s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) | |
30555476 BD |
1657 | { |
1658 | cpufreq_unregister_notifier(&port->freq_transition, | |
1659 | CPUFREQ_TRANSITION_NOTIFIER); | |
1660 | } | |
1661 | ||
1662 | #else | |
ef4aca70 RB |
1663 | static inline int |
1664 | s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) | |
30555476 BD |
1665 | { |
1666 | return 0; | |
1667 | } | |
1668 | ||
ef4aca70 RB |
1669 | static inline void |
1670 | s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) | |
30555476 BD |
1671 | { |
1672 | } | |
1673 | #endif | |
1674 | ||
b497549a BD |
1675 | /* s3c24xx_serial_init_port |
1676 | * | |
1677 | * initialise a single serial port from the platform device given | |
1678 | */ | |
1679 | ||
1680 | static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, | |
b497549a BD |
1681 | struct platform_device *platdev) |
1682 | { | |
1683 | struct uart_port *port = &ourport->port; | |
da121506 | 1684 | struct s3c2410_uartcfg *cfg = ourport->cfg; |
b497549a BD |
1685 | struct resource *res; |
1686 | int ret; | |
1687 | ||
1688 | dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev); | |
1689 | ||
1690 | if (platdev == NULL) | |
1691 | return -ENODEV; | |
1692 | ||
b497549a BD |
1693 | if (port->mapbase != 0) |
1694 | return 0; | |
1695 | ||
b497549a BD |
1696 | /* setup info for port */ |
1697 | port->dev = &platdev->dev; | |
b497549a | 1698 | |
88bb4ea1 TA |
1699 | /* Startup sequence is different for s3c64xx and higher SoC's */ |
1700 | if (s3c24xx_serial_has_interrupt_mask(port)) | |
1701 | s3c24xx_serial_ops.startup = s3c64xx_serial_startup; | |
1702 | ||
b497549a BD |
1703 | port->uartclk = 1; |
1704 | ||
1705 | if (cfg->uart_flags & UPF_CONS_FLOW) { | |
1706 | dbg("s3c24xx_serial_init_port: enabling flow control\n"); | |
1707 | port->flags |= UPF_CONS_FLOW; | |
1708 | } | |
1709 | ||
1710 | /* sort our the physical and virtual addresses for each UART */ | |
1711 | ||
1712 | res = platform_get_resource(platdev, IORESOURCE_MEM, 0); | |
1713 | if (res == NULL) { | |
d20925e1 | 1714 | dev_err(port->dev, "failed to find memory resource for uart\n"); |
b497549a BD |
1715 | return -EINVAL; |
1716 | } | |
1717 | ||
e4ac92df | 1718 | dbg("resource %pR)\n", res); |
b497549a | 1719 | |
41147bfd TA |
1720 | port->membase = devm_ioremap(port->dev, res->start, resource_size(res)); |
1721 | if (!port->membase) { | |
1722 | dev_err(port->dev, "failed to remap controller address\n"); | |
1723 | return -EBUSY; | |
1724 | } | |
1725 | ||
b690ace5 | 1726 | port->mapbase = res->start; |
b497549a BD |
1727 | ret = platform_get_irq(platdev, 0); |
1728 | if (ret < 0) | |
1729 | port->irq = 0; | |
b73c289c | 1730 | else { |
b497549a | 1731 | port->irq = ret; |
b73c289c BD |
1732 | ourport->rx_irq = ret; |
1733 | ourport->tx_irq = ret + 1; | |
1734 | } | |
9303ac15 | 1735 | |
b73c289c BD |
1736 | ret = platform_get_irq(platdev, 1); |
1737 | if (ret > 0) | |
1738 | ourport->tx_irq = ret; | |
658c9d2b RB |
1739 | /* |
1740 | * DMA is currently supported only on DT platforms, if DMA properties | |
1741 | * are specified. | |
1742 | */ | |
1743 | if (platdev->dev.of_node && of_find_property(platdev->dev.of_node, | |
1744 | "dmas", NULL)) { | |
1745 | ourport->dma = devm_kzalloc(port->dev, | |
1746 | sizeof(*ourport->dma), | |
1747 | GFP_KERNEL); | |
1748 | if (!ourport->dma) | |
1749 | return -ENOMEM; | |
1750 | } | |
b497549a BD |
1751 | |
1752 | ourport->clk = clk_get(&platdev->dev, "uart"); | |
60e93575 CK |
1753 | if (IS_ERR(ourport->clk)) { |
1754 | pr_err("%s: Controller clock not found\n", | |
1755 | dev_name(&platdev->dev)); | |
1756 | return PTR_ERR(ourport->clk); | |
1757 | } | |
1758 | ||
1759 | ret = clk_prepare_enable(ourport->clk); | |
1760 | if (ret) { | |
1761 | pr_err("uart: clock failed to prepare+enable: %d\n", ret); | |
1762 | clk_put(ourport->clk); | |
1763 | return ret; | |
1764 | } | |
b497549a | 1765 | |
88bb4ea1 TA |
1766 | /* Keep all interrupts masked and cleared */ |
1767 | if (s3c24xx_serial_has_interrupt_mask(port)) { | |
1768 | wr_regl(port, S3C64XX_UINTM, 0xf); | |
1769 | wr_regl(port, S3C64XX_UINTP, 0xf); | |
1770 | wr_regl(port, S3C64XX_UINTSP, 0xf); | |
1771 | } | |
1772 | ||
1ff5b64d FE |
1773 | dbg("port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n", |
1774 | &port->mapbase, port->membase, port->irq, | |
b73c289c | 1775 | ourport->rx_irq, ourport->tx_irq, port->uartclk); |
b497549a BD |
1776 | |
1777 | /* reset the fifos (and setup the uart) */ | |
1778 | s3c24xx_serial_resetport(port, cfg); | |
1779 | return 0; | |
1780 | } | |
1781 | ||
b497549a BD |
1782 | /* Device driver serial port probe */ |
1783 | ||
26c919e1 | 1784 | static const struct of_device_id s3c24xx_uart_dt_match[]; |
b497549a BD |
1785 | static int probe_index; |
1786 | ||
26c919e1 TA |
1787 | static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data( |
1788 | struct platform_device *pdev) | |
1789 | { | |
1790 | #ifdef CONFIG_OF | |
1791 | if (pdev->dev.of_node) { | |
1792 | const struct of_device_id *match; | |
1793 | match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node); | |
1794 | return (struct s3c24xx_serial_drv_data *)match->data; | |
1795 | } | |
1796 | #endif | |
1797 | return (struct s3c24xx_serial_drv_data *) | |
1798 | platform_get_device_id(pdev)->driver_data; | |
1799 | } | |
1800 | ||
da121506 | 1801 | static int s3c24xx_serial_probe(struct platform_device *pdev) |
b497549a | 1802 | { |
4622eb68 | 1803 | struct device_node *np = pdev->dev.of_node; |
b497549a | 1804 | struct s3c24xx_uart_port *ourport; |
13a9f6c6 | 1805 | int index = probe_index; |
b497549a BD |
1806 | int ret; |
1807 | ||
4622eb68 NKC |
1808 | if (np) { |
1809 | ret = of_alias_get_id(np, "serial"); | |
13a9f6c6 TF |
1810 | if (ret >= 0) |
1811 | index = ret; | |
1812 | } | |
1813 | ||
1814 | dbg("s3c24xx_serial_probe(%p) %d\n", pdev, index); | |
b497549a | 1815 | |
13a9f6c6 | 1816 | ourport = &s3c24xx_serial_ports[index]; |
da121506 | 1817 | |
26c919e1 TA |
1818 | ourport->drv_data = s3c24xx_get_driver_data(pdev); |
1819 | if (!ourport->drv_data) { | |
1820 | dev_err(&pdev->dev, "could not find driver data\n"); | |
1821 | return -ENODEV; | |
1822 | } | |
da121506 | 1823 | |
7cd88831 | 1824 | ourport->baudclk = ERR_PTR(-EINVAL); |
da121506 | 1825 | ourport->info = ourport->drv_data->info; |
574de559 | 1826 | ourport->cfg = (dev_get_platdata(&pdev->dev)) ? |
d4aab206 | 1827 | dev_get_platdata(&pdev->dev) : |
da121506 TA |
1828 | ourport->drv_data->def_cfg; |
1829 | ||
4622eb68 NKC |
1830 | if (np) |
1831 | of_property_read_u32(np, | |
135f07c3 NKC |
1832 | "samsung,uart-fifosize", &ourport->port.fifosize); |
1833 | ||
2f1ba72d RB |
1834 | if (ourport->drv_data->fifosize[index]) |
1835 | ourport->port.fifosize = ourport->drv_data->fifosize[index]; | |
1836 | else if (ourport->info->fifosize) | |
1837 | ourport->port.fifosize = ourport->info->fifosize; | |
da121506 | 1838 | |
b497549a BD |
1839 | probe_index++; |
1840 | ||
1841 | dbg("%s: initialising port %p...\n", __func__, ourport); | |
1842 | ||
da121506 | 1843 | ret = s3c24xx_serial_init_port(ourport, pdev); |
b497549a | 1844 | if (ret < 0) |
8ad711a9 | 1845 | return ret; |
b497549a | 1846 | |
6f134c3c TB |
1847 | if (!s3c24xx_uart_drv.state) { |
1848 | ret = uart_register_driver(&s3c24xx_uart_drv); | |
1849 | if (ret < 0) { | |
1850 | pr_err("Failed to register Samsung UART driver\n"); | |
1851 | return ret; | |
1852 | } | |
1853 | } | |
1854 | ||
b497549a BD |
1855 | dbg("%s: adding port\n", __func__); |
1856 | uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); | |
da121506 | 1857 | platform_set_drvdata(pdev, &ourport->port); |
b497549a | 1858 | |
0da3336f HS |
1859 | /* |
1860 | * Deactivate the clock enabled in s3c24xx_serial_init_port here, | |
1861 | * so that a potential re-enablement through the pm-callback overlaps | |
1862 | * and keeps the clock enabled in this case. | |
1863 | */ | |
1864 | clk_disable_unprepare(ourport->clk); | |
1865 | ||
30555476 BD |
1866 | ret = s3c24xx_serial_cpufreq_register(ourport); |
1867 | if (ret < 0) | |
da121506 | 1868 | dev_err(&pdev->dev, "failed to add cpufreq notifier\n"); |
30555476 | 1869 | |
b497549a | 1870 | return 0; |
b497549a BD |
1871 | } |
1872 | ||
ae8d8a14 | 1873 | static int s3c24xx_serial_remove(struct platform_device *dev) |
b497549a BD |
1874 | { |
1875 | struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); | |
1876 | ||
1877 | if (port) { | |
30555476 | 1878 | s3c24xx_serial_cpufreq_deregister(to_ourport(port)); |
b497549a BD |
1879 | uart_remove_one_port(&s3c24xx_uart_drv, port); |
1880 | } | |
1881 | ||
6f134c3c TB |
1882 | uart_unregister_driver(&s3c24xx_uart_drv); |
1883 | ||
b497549a BD |
1884 | return 0; |
1885 | } | |
1886 | ||
b497549a | 1887 | /* UART power management code */ |
aef7fe52 MH |
1888 | #ifdef CONFIG_PM_SLEEP |
1889 | static int s3c24xx_serial_suspend(struct device *dev) | |
b497549a | 1890 | { |
aef7fe52 | 1891 | struct uart_port *port = s3c24xx_dev_to_port(dev); |
b497549a BD |
1892 | |
1893 | if (port) | |
1894 | uart_suspend_port(&s3c24xx_uart_drv, port); | |
1895 | ||
1896 | return 0; | |
1897 | } | |
1898 | ||
aef7fe52 | 1899 | static int s3c24xx_serial_resume(struct device *dev) |
b497549a | 1900 | { |
aef7fe52 | 1901 | struct uart_port *port = s3c24xx_dev_to_port(dev); |
b497549a BD |
1902 | struct s3c24xx_uart_port *ourport = to_ourport(port); |
1903 | ||
1904 | if (port) { | |
9484b009 | 1905 | clk_prepare_enable(ourport->clk); |
b497549a | 1906 | s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); |
9484b009 | 1907 | clk_disable_unprepare(ourport->clk); |
b497549a BD |
1908 | |
1909 | uart_resume_port(&s3c24xx_uart_drv, port); | |
1910 | } | |
1911 | ||
1912 | return 0; | |
1913 | } | |
aef7fe52 | 1914 | |
d09a7308 MS |
1915 | static int s3c24xx_serial_resume_noirq(struct device *dev) |
1916 | { | |
1917 | struct uart_port *port = s3c24xx_dev_to_port(dev); | |
1918 | ||
1919 | if (port) { | |
1920 | /* restore IRQ mask */ | |
1921 | if (s3c24xx_serial_has_interrupt_mask(port)) { | |
1922 | unsigned int uintm = 0xf; | |
1923 | if (tx_enabled(port)) | |
1924 | uintm &= ~S3C64XX_UINTM_TXD_MSK; | |
1925 | if (rx_enabled(port)) | |
1926 | uintm &= ~S3C64XX_UINTM_RXD_MSK; | |
1927 | wr_regl(port, S3C64XX_UINTM, uintm); | |
1928 | } | |
1929 | } | |
1930 | ||
1931 | return 0; | |
1932 | } | |
1933 | ||
aef7fe52 MH |
1934 | static const struct dev_pm_ops s3c24xx_serial_pm_ops = { |
1935 | .suspend = s3c24xx_serial_suspend, | |
1936 | .resume = s3c24xx_serial_resume, | |
d09a7308 | 1937 | .resume_noirq = s3c24xx_serial_resume_noirq, |
aef7fe52 | 1938 | }; |
b882fc1b KK |
1939 | #define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops) |
1940 | ||
aef7fe52 | 1941 | #else /* !CONFIG_PM_SLEEP */ |
b882fc1b KK |
1942 | |
1943 | #define SERIAL_SAMSUNG_PM_OPS NULL | |
aef7fe52 | 1944 | #endif /* CONFIG_PM_SLEEP */ |
b497549a | 1945 | |
b497549a BD |
1946 | /* Console code */ |
1947 | ||
1948 | #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE | |
1949 | ||
1950 | static struct uart_port *cons_uart; | |
1951 | ||
1952 | static int | |
1953 | s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) | |
1954 | { | |
1955 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
1956 | unsigned long ufstat, utrstat; | |
1957 | ||
1958 | if (ufcon & S3C2410_UFCON_FIFOMODE) { | |
9ddc5b6f | 1959 | /* fifo mode - check amount of data in fifo registers... */ |
b497549a BD |
1960 | |
1961 | ufstat = rd_regl(port, S3C2410_UFSTAT); | |
1962 | return (ufstat & info->tx_fifofull) ? 0 : 1; | |
1963 | } | |
1964 | ||
1965 | /* in non-fifo mode, we go and use the tx buffer empty */ | |
1966 | ||
1967 | utrstat = rd_regl(port, S3C2410_UTRSTAT); | |
1968 | return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0; | |
1969 | } | |
1970 | ||
38adbc54 MS |
1971 | static bool |
1972 | s3c24xx_port_configured(unsigned int ucon) | |
1973 | { | |
1974 | /* consider the serial port configured if the tx/rx mode set */ | |
1975 | return (ucon & 0xf) != 0; | |
1976 | } | |
1977 | ||
93b5c032 JP |
1978 | #ifdef CONFIG_CONSOLE_POLL |
1979 | /* | |
1980 | * Console polling routines for writing and reading from the uart while | |
1981 | * in an interrupt or debug context. | |
1982 | */ | |
1983 | ||
1984 | static int s3c24xx_serial_get_poll_char(struct uart_port *port) | |
1985 | { | |
1986 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
1987 | unsigned int ufstat; | |
1988 | ||
1989 | ufstat = rd_regl(port, S3C2410_UFSTAT); | |
1990 | if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0) | |
1991 | return NO_POLL_CHAR; | |
1992 | ||
1993 | return rd_regb(port, S3C2410_URXH); | |
1994 | } | |
1995 | ||
1996 | static void s3c24xx_serial_put_poll_char(struct uart_port *port, | |
1997 | unsigned char c) | |
1998 | { | |
bb7f09ba DA |
1999 | unsigned int ufcon = rd_regl(port, S3C2410_UFCON); |
2000 | unsigned int ucon = rd_regl(port, S3C2410_UCON); | |
38adbc54 MS |
2001 | |
2002 | /* not possible to xmit on unconfigured port */ | |
2003 | if (!s3c24xx_port_configured(ucon)) | |
2004 | return; | |
93b5c032 JP |
2005 | |
2006 | while (!s3c24xx_serial_console_txrdy(port, ufcon)) | |
2007 | cpu_relax(); | |
bb7f09ba | 2008 | wr_regb(port, S3C2410_UTXH, c); |
93b5c032 JP |
2009 | } |
2010 | ||
2011 | #endif /* CONFIG_CONSOLE_POLL */ | |
2012 | ||
b497549a BD |
2013 | static void |
2014 | s3c24xx_serial_console_putchar(struct uart_port *port, int ch) | |
2015 | { | |
bb7f09ba | 2016 | unsigned int ufcon = rd_regl(port, S3C2410_UFCON); |
38adbc54 | 2017 | |
b497549a | 2018 | while (!s3c24xx_serial_console_txrdy(port, ufcon)) |
f94b0572 | 2019 | cpu_relax(); |
bb7f09ba | 2020 | wr_regb(port, S3C2410_UTXH, ch); |
b497549a BD |
2021 | } |
2022 | ||
2023 | static void | |
2024 | s3c24xx_serial_console_write(struct console *co, const char *s, | |
2025 | unsigned int count) | |
2026 | { | |
ab88c8dc DA |
2027 | unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON); |
2028 | ||
2029 | /* not possible to xmit on unconfigured port */ | |
2030 | if (!s3c24xx_port_configured(ucon)) | |
2031 | return; | |
2032 | ||
b497549a BD |
2033 | uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); |
2034 | } | |
2035 | ||
2036 | static void __init | |
2037 | s3c24xx_serial_get_options(struct uart_port *port, int *baud, | |
2038 | int *parity, int *bits) | |
2039 | { | |
b497549a BD |
2040 | struct clk *clk; |
2041 | unsigned int ulcon; | |
2042 | unsigned int ucon; | |
2043 | unsigned int ubrdiv; | |
2044 | unsigned long rate; | |
5f5a7a55 TA |
2045 | unsigned int clk_sel; |
2046 | char clk_name[MAX_CLK_NAME_LENGTH]; | |
b497549a BD |
2047 | |
2048 | ulcon = rd_regl(port, S3C2410_ULCON); | |
2049 | ucon = rd_regl(port, S3C2410_UCON); | |
2050 | ubrdiv = rd_regl(port, S3C2410_UBRDIV); | |
2051 | ||
2052 | dbg("s3c24xx_serial_get_options: port=%p\n" | |
2053 | "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n", | |
2054 | port, ulcon, ucon, ubrdiv); | |
2055 | ||
38adbc54 | 2056 | if (s3c24xx_port_configured(ucon)) { |
b497549a BD |
2057 | switch (ulcon & S3C2410_LCON_CSMASK) { |
2058 | case S3C2410_LCON_CS5: | |
2059 | *bits = 5; | |
2060 | break; | |
2061 | case S3C2410_LCON_CS6: | |
2062 | *bits = 6; | |
2063 | break; | |
2064 | case S3C2410_LCON_CS7: | |
2065 | *bits = 7; | |
2066 | break; | |
b497549a | 2067 | case S3C2410_LCON_CS8: |
3bcce591 | 2068 | default: |
b497549a BD |
2069 | *bits = 8; |
2070 | break; | |
2071 | } | |
2072 | ||
2073 | switch (ulcon & S3C2410_LCON_PMASK) { | |
2074 | case S3C2410_LCON_PEVEN: | |
2075 | *parity = 'e'; | |
2076 | break; | |
2077 | ||
2078 | case S3C2410_LCON_PODD: | |
2079 | *parity = 'o'; | |
2080 | break; | |
2081 | ||
2082 | case S3C2410_LCON_PNONE: | |
2083 | default: | |
2084 | *parity = 'n'; | |
2085 | } | |
2086 | ||
2087 | /* now calculate the baud rate */ | |
2088 | ||
5f5a7a55 TA |
2089 | clk_sel = s3c24xx_serial_getsource(port); |
2090 | sprintf(clk_name, "clk_uart_baud%d", clk_sel); | |
b497549a | 2091 | |
5f5a7a55 | 2092 | clk = clk_get(port->dev, clk_name); |
7cd88831 | 2093 | if (!IS_ERR(clk)) |
5f5a7a55 | 2094 | rate = clk_get_rate(clk); |
b497549a BD |
2095 | else |
2096 | rate = 1; | |
2097 | ||
b497549a BD |
2098 | *baud = rate / (16 * (ubrdiv + 1)); |
2099 | dbg("calculated baud %d\n", *baud); | |
2100 | } | |
2101 | ||
2102 | } | |
2103 | ||
b497549a BD |
2104 | static int __init |
2105 | s3c24xx_serial_console_setup(struct console *co, char *options) | |
2106 | { | |
2107 | struct uart_port *port; | |
2108 | int baud = 9600; | |
2109 | int bits = 8; | |
2110 | int parity = 'n'; | |
2111 | int flow = 'n'; | |
2112 | ||
2113 | dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n", | |
2114 | co, co->index, options); | |
2115 | ||
2116 | /* is this a valid port */ | |
2117 | ||
03d5e77b | 2118 | if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS) |
b497549a BD |
2119 | co->index = 0; |
2120 | ||
2121 | port = &s3c24xx_serial_ports[co->index].port; | |
2122 | ||
2123 | /* is the port configured? */ | |
2124 | ||
ee430f16 TA |
2125 | if (port->mapbase == 0x0) |
2126 | return -ENODEV; | |
b497549a BD |
2127 | |
2128 | cons_uart = port; | |
2129 | ||
2130 | dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index); | |
2131 | ||
2132 | /* | |
2133 | * Check whether an invalid uart number has been specified, and | |
2134 | * if so, search for the first available port that does have | |
2135 | * console support. | |
2136 | */ | |
2137 | if (options) | |
2138 | uart_parse_options(options, &baud, &parity, &bits, &flow); | |
2139 | else | |
2140 | s3c24xx_serial_get_options(port, &baud, &parity, &bits); | |
2141 | ||
2142 | dbg("s3c24xx_serial_console_setup: baud %d\n", baud); | |
2143 | ||
2144 | return uart_set_options(port, co, baud, parity, bits, flow); | |
2145 | } | |
2146 | ||
b497549a BD |
2147 | static struct console s3c24xx_serial_console = { |
2148 | .name = S3C24XX_SERIAL_NAME, | |
2149 | .device = uart_console_device, | |
2150 | .flags = CON_PRINTBUFFER, | |
2151 | .index = -1, | |
2152 | .write = s3c24xx_serial_console_write, | |
5822a5df TA |
2153 | .setup = s3c24xx_serial_console_setup, |
2154 | .data = &s3c24xx_uart_drv, | |
b497549a | 2155 | }; |
da121506 TA |
2156 | #endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ |
2157 | ||
2158 | #ifdef CONFIG_CPU_S3C2410 | |
2159 | static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { | |
2160 | .info = &(struct s3c24xx_uart_info) { | |
2161 | .name = "Samsung S3C2410 UART", | |
2162 | .type = PORT_S3C2410, | |
2163 | .fifosize = 16, | |
2164 | .rx_fifomask = S3C2410_UFSTAT_RXMASK, | |
2165 | .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, | |
2166 | .rx_fifofull = S3C2410_UFSTAT_RXFULL, | |
2167 | .tx_fifofull = S3C2410_UFSTAT_TXFULL, | |
2168 | .tx_fifomask = S3C2410_UFSTAT_TXMASK, | |
2169 | .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, | |
2170 | .def_clk_sel = S3C2410_UCON_CLKSEL0, | |
2171 | .num_clks = 2, | |
2172 | .clksel_mask = S3C2410_UCON_CLKMASK, | |
2173 | .clksel_shift = S3C2410_UCON_CLKSHIFT, | |
2174 | }, | |
2175 | .def_cfg = &(struct s3c2410_uartcfg) { | |
2176 | .ucon = S3C2410_UCON_DEFAULT, | |
2177 | .ufcon = S3C2410_UFCON_DEFAULT, | |
2178 | }, | |
2179 | }; | |
2180 | #define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data) | |
2181 | #else | |
2182 | #define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
2183 | #endif | |
b497549a | 2184 | |
da121506 TA |
2185 | #ifdef CONFIG_CPU_S3C2412 |
2186 | static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { | |
2187 | .info = &(struct s3c24xx_uart_info) { | |
2188 | .name = "Samsung S3C2412 UART", | |
2189 | .type = PORT_S3C2412, | |
2190 | .fifosize = 64, | |
2191 | .has_divslot = 1, | |
2192 | .rx_fifomask = S3C2440_UFSTAT_RXMASK, | |
2193 | .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, | |
2194 | .rx_fifofull = S3C2440_UFSTAT_RXFULL, | |
2195 | .tx_fifofull = S3C2440_UFSTAT_TXFULL, | |
2196 | .tx_fifomask = S3C2440_UFSTAT_TXMASK, | |
2197 | .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, | |
2198 | .def_clk_sel = S3C2410_UCON_CLKSEL2, | |
2199 | .num_clks = 4, | |
2200 | .clksel_mask = S3C2412_UCON_CLKMASK, | |
2201 | .clksel_shift = S3C2412_UCON_CLKSHIFT, | |
2202 | }, | |
2203 | .def_cfg = &(struct s3c2410_uartcfg) { | |
2204 | .ucon = S3C2410_UCON_DEFAULT, | |
2205 | .ufcon = S3C2410_UFCON_DEFAULT, | |
2206 | }, | |
2207 | }; | |
2208 | #define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data) | |
2209 | #else | |
2210 | #define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
2211 | #endif | |
b497549a | 2212 | |
da121506 | 2213 | #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \ |
b26469a8 | 2214 | defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442) |
da121506 TA |
2215 | static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { |
2216 | .info = &(struct s3c24xx_uart_info) { | |
2217 | .name = "Samsung S3C2440 UART", | |
2218 | .type = PORT_S3C2440, | |
2219 | .fifosize = 64, | |
2220 | .has_divslot = 1, | |
2221 | .rx_fifomask = S3C2440_UFSTAT_RXMASK, | |
2222 | .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, | |
2223 | .rx_fifofull = S3C2440_UFSTAT_RXFULL, | |
2224 | .tx_fifofull = S3C2440_UFSTAT_TXFULL, | |
2225 | .tx_fifomask = S3C2440_UFSTAT_TXMASK, | |
2226 | .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, | |
2227 | .def_clk_sel = S3C2410_UCON_CLKSEL2, | |
2228 | .num_clks = 4, | |
2229 | .clksel_mask = S3C2412_UCON_CLKMASK, | |
2230 | .clksel_shift = S3C2412_UCON_CLKSHIFT, | |
2231 | }, | |
2232 | .def_cfg = &(struct s3c2410_uartcfg) { | |
2233 | .ucon = S3C2410_UCON_DEFAULT, | |
2234 | .ufcon = S3C2410_UFCON_DEFAULT, | |
2235 | }, | |
2236 | }; | |
2237 | #define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data) | |
2238 | #else | |
2239 | #define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
2240 | #endif | |
b497549a | 2241 | |
953b53a7 | 2242 | #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) |
da121506 TA |
2243 | static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { |
2244 | .info = &(struct s3c24xx_uart_info) { | |
2245 | .name = "Samsung S3C6400 UART", | |
2246 | .type = PORT_S3C6400, | |
2247 | .fifosize = 64, | |
2248 | .has_divslot = 1, | |
2249 | .rx_fifomask = S3C2440_UFSTAT_RXMASK, | |
2250 | .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, | |
2251 | .rx_fifofull = S3C2440_UFSTAT_RXFULL, | |
2252 | .tx_fifofull = S3C2440_UFSTAT_TXFULL, | |
2253 | .tx_fifomask = S3C2440_UFSTAT_TXMASK, | |
2254 | .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, | |
2255 | .def_clk_sel = S3C2410_UCON_CLKSEL2, | |
2256 | .num_clks = 4, | |
2257 | .clksel_mask = S3C6400_UCON_CLKMASK, | |
2258 | .clksel_shift = S3C6400_UCON_CLKSHIFT, | |
2259 | }, | |
2260 | .def_cfg = &(struct s3c2410_uartcfg) { | |
2261 | .ucon = S3C2410_UCON_DEFAULT, | |
2262 | .ufcon = S3C2410_UFCON_DEFAULT, | |
2263 | }, | |
2264 | }; | |
2265 | #define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data) | |
2266 | #else | |
2267 | #define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
2268 | #endif | |
b497549a | 2269 | |
da121506 TA |
2270 | #ifdef CONFIG_CPU_S5PV210 |
2271 | static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { | |
2272 | .info = &(struct s3c24xx_uart_info) { | |
2273 | .name = "Samsung S5PV210 UART", | |
2274 | .type = PORT_S3C6400, | |
2275 | .has_divslot = 1, | |
2276 | .rx_fifomask = S5PV210_UFSTAT_RXMASK, | |
2277 | .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, | |
2278 | .rx_fifofull = S5PV210_UFSTAT_RXFULL, | |
2279 | .tx_fifofull = S5PV210_UFSTAT_TXFULL, | |
2280 | .tx_fifomask = S5PV210_UFSTAT_TXMASK, | |
2281 | .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, | |
2282 | .def_clk_sel = S3C2410_UCON_CLKSEL0, | |
2283 | .num_clks = 2, | |
2284 | .clksel_mask = S5PV210_UCON_CLKMASK, | |
2285 | .clksel_shift = S5PV210_UCON_CLKSHIFT, | |
2286 | }, | |
2287 | .def_cfg = &(struct s3c2410_uartcfg) { | |
2288 | .ucon = S5PV210_UCON_DEFAULT, | |
2289 | .ufcon = S5PV210_UFCON_DEFAULT, | |
2290 | }, | |
2291 | .fifosize = { 256, 64, 16, 16 }, | |
2292 | }; | |
2293 | #define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data) | |
2294 | #else | |
2295 | #define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
2296 | #endif | |
b497549a | 2297 | |
33f88136 | 2298 | #if defined(CONFIG_ARCH_EXYNOS) |
31ec77ac CC |
2299 | #define EXYNOS_COMMON_SERIAL_DRV_DATA \ |
2300 | .info = &(struct s3c24xx_uart_info) { \ | |
2301 | .name = "Samsung Exynos UART", \ | |
2302 | .type = PORT_S3C6400, \ | |
2303 | .has_divslot = 1, \ | |
2304 | .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ | |
2305 | .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ | |
2306 | .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ | |
2307 | .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ | |
2308 | .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ | |
2309 | .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ | |
2310 | .def_clk_sel = S3C2410_UCON_CLKSEL0, \ | |
2311 | .num_clks = 1, \ | |
2312 | .clksel_mask = 0, \ | |
2313 | .clksel_shift = 0, \ | |
2314 | }, \ | |
2315 | .def_cfg = &(struct s3c2410_uartcfg) { \ | |
2316 | .ucon = S5PV210_UCON_DEFAULT, \ | |
2317 | .ufcon = S5PV210_UFCON_DEFAULT, \ | |
2318 | .has_fracval = 1, \ | |
2319 | } \ | |
2320 | ||
da121506 | 2321 | static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { |
31ec77ac | 2322 | EXYNOS_COMMON_SERIAL_DRV_DATA, |
da121506 TA |
2323 | .fifosize = { 256, 64, 16, 16 }, |
2324 | }; | |
31ec77ac CC |
2325 | |
2326 | static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = { | |
2327 | EXYNOS_COMMON_SERIAL_DRV_DATA, | |
2328 | .fifosize = { 64, 256, 16, 256 }, | |
2329 | }; | |
2330 | ||
da121506 | 2331 | #define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data) |
31ec77ac | 2332 | #define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data) |
da121506 TA |
2333 | #else |
2334 | #define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
31ec77ac | 2335 | #define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL |
da121506 | 2336 | #endif |
b497549a | 2337 | |
da121506 TA |
2338 | static struct platform_device_id s3c24xx_serial_driver_ids[] = { |
2339 | { | |
2340 | .name = "s3c2410-uart", | |
2341 | .driver_data = S3C2410_SERIAL_DRV_DATA, | |
2342 | }, { | |
2343 | .name = "s3c2412-uart", | |
2344 | .driver_data = S3C2412_SERIAL_DRV_DATA, | |
2345 | }, { | |
2346 | .name = "s3c2440-uart", | |
2347 | .driver_data = S3C2440_SERIAL_DRV_DATA, | |
2348 | }, { | |
2349 | .name = "s3c6400-uart", | |
2350 | .driver_data = S3C6400_SERIAL_DRV_DATA, | |
2351 | }, { | |
2352 | .name = "s5pv210-uart", | |
2353 | .driver_data = S5PV210_SERIAL_DRV_DATA, | |
2354 | }, { | |
2355 | .name = "exynos4210-uart", | |
2356 | .driver_data = EXYNOS4210_SERIAL_DRV_DATA, | |
31ec77ac CC |
2357 | }, { |
2358 | .name = "exynos5433-uart", | |
2359 | .driver_data = EXYNOS5433_SERIAL_DRV_DATA, | |
da121506 TA |
2360 | }, |
2361 | { }, | |
2362 | }; | |
2363 | MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); | |
2364 | ||
26c919e1 TA |
2365 | #ifdef CONFIG_OF |
2366 | static const struct of_device_id s3c24xx_uart_dt_match[] = { | |
666ca0b9 HS |
2367 | { .compatible = "samsung,s3c2410-uart", |
2368 | .data = (void *)S3C2410_SERIAL_DRV_DATA }, | |
2369 | { .compatible = "samsung,s3c2412-uart", | |
2370 | .data = (void *)S3C2412_SERIAL_DRV_DATA }, | |
2371 | { .compatible = "samsung,s3c2440-uart", | |
2372 | .data = (void *)S3C2440_SERIAL_DRV_DATA }, | |
2373 | { .compatible = "samsung,s3c6400-uart", | |
2374 | .data = (void *)S3C6400_SERIAL_DRV_DATA }, | |
2375 | { .compatible = "samsung,s5pv210-uart", | |
2376 | .data = (void *)S5PV210_SERIAL_DRV_DATA }, | |
26c919e1 | 2377 | { .compatible = "samsung,exynos4210-uart", |
a169a888 | 2378 | .data = (void *)EXYNOS4210_SERIAL_DRV_DATA }, |
31ec77ac CC |
2379 | { .compatible = "samsung,exynos5433-uart", |
2380 | .data = (void *)EXYNOS5433_SERIAL_DRV_DATA }, | |
26c919e1 TA |
2381 | {}, |
2382 | }; | |
2383 | MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); | |
26c919e1 TA |
2384 | #endif |
2385 | ||
da121506 TA |
2386 | static struct platform_driver samsung_serial_driver = { |
2387 | .probe = s3c24xx_serial_probe, | |
2d47b716 | 2388 | .remove = s3c24xx_serial_remove, |
da121506 TA |
2389 | .id_table = s3c24xx_serial_driver_ids, |
2390 | .driver = { | |
2391 | .name = "samsung-uart", | |
da121506 | 2392 | .pm = SERIAL_SAMSUNG_PM_OPS, |
905f4ba2 | 2393 | .of_match_table = of_match_ptr(s3c24xx_uart_dt_match), |
da121506 TA |
2394 | }, |
2395 | }; | |
b497549a | 2396 | |
6f134c3c | 2397 | module_platform_driver(samsung_serial_driver); |
b497549a | 2398 | |
c3bda295 | 2399 | #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE |
b94ba032 TF |
2400 | /* |
2401 | * Early console. | |
2402 | */ | |
2403 | ||
2404 | struct samsung_early_console_data { | |
2405 | u32 txfull_mask; | |
2406 | }; | |
2407 | ||
2408 | static void samsung_early_busyuart(struct uart_port *port) | |
2409 | { | |
2410 | while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE)) | |
2411 | ; | |
2412 | } | |
2413 | ||
2414 | static void samsung_early_busyuart_fifo(struct uart_port *port) | |
2415 | { | |
2416 | struct samsung_early_console_data *data = port->private_data; | |
2417 | ||
2418 | while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask) | |
2419 | ; | |
2420 | } | |
2421 | ||
2422 | static void samsung_early_putc(struct uart_port *port, int c) | |
2423 | { | |
2424 | if (readl(port->membase + S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) | |
2425 | samsung_early_busyuart_fifo(port); | |
2426 | else | |
2427 | samsung_early_busyuart(port); | |
2428 | ||
2429 | writeb(c, port->membase + S3C2410_UTXH); | |
2430 | } | |
2431 | ||
2432 | static void samsung_early_write(struct console *con, const char *s, unsigned n) | |
2433 | { | |
2434 | struct earlycon_device *dev = con->data; | |
2435 | ||
2436 | uart_console_write(&dev->port, s, n, samsung_early_putc); | |
2437 | } | |
2438 | ||
2439 | static int __init samsung_early_console_setup(struct earlycon_device *device, | |
2440 | const char *opt) | |
2441 | { | |
2442 | if (!device->port.membase) | |
2443 | return -ENODEV; | |
2444 | ||
2445 | device->con->write = samsung_early_write; | |
2446 | return 0; | |
2447 | } | |
2448 | ||
2449 | /* S3C2410 */ | |
2450 | static struct samsung_early_console_data s3c2410_early_console_data = { | |
2451 | .txfull_mask = S3C2410_UFSTAT_TXFULL, | |
2452 | }; | |
2453 | ||
2454 | static int __init s3c2410_early_console_setup(struct earlycon_device *device, | |
2455 | const char *opt) | |
2456 | { | |
2457 | device->port.private_data = &s3c2410_early_console_data; | |
2458 | return samsung_early_console_setup(device, opt); | |
2459 | } | |
2460 | OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart", | |
2461 | s3c2410_early_console_setup); | |
2462 | EARLYCON_DECLARE(s3c2410, s3c2410_early_console_setup); | |
2463 | ||
2464 | /* S3C2412, S3C2440, S3C64xx */ | |
2465 | static struct samsung_early_console_data s3c2440_early_console_data = { | |
2466 | .txfull_mask = S3C2440_UFSTAT_TXFULL, | |
2467 | }; | |
2468 | ||
2469 | static int __init s3c2440_early_console_setup(struct earlycon_device *device, | |
2470 | const char *opt) | |
2471 | { | |
2472 | device->port.private_data = &s3c2440_early_console_data; | |
2473 | return samsung_early_console_setup(device, opt); | |
2474 | } | |
2475 | OF_EARLYCON_DECLARE(s3c2412, "samsung,s3c2412-uart", | |
2476 | s3c2440_early_console_setup); | |
2477 | OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart", | |
2478 | s3c2440_early_console_setup); | |
2479 | OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart", | |
2480 | s3c2440_early_console_setup); | |
2481 | EARLYCON_DECLARE(s3c2412, s3c2440_early_console_setup); | |
2482 | EARLYCON_DECLARE(s3c2440, s3c2440_early_console_setup); | |
2483 | EARLYCON_DECLARE(s3c6400, s3c2440_early_console_setup); | |
2484 | ||
2485 | /* S5PV210, EXYNOS */ | |
2486 | static struct samsung_early_console_data s5pv210_early_console_data = { | |
2487 | .txfull_mask = S5PV210_UFSTAT_TXFULL, | |
2488 | }; | |
2489 | ||
2490 | static int __init s5pv210_early_console_setup(struct earlycon_device *device, | |
2491 | const char *opt) | |
2492 | { | |
2493 | device->port.private_data = &s5pv210_early_console_data; | |
2494 | return samsung_early_console_setup(device, opt); | |
2495 | } | |
2496 | OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart", | |
2497 | s5pv210_early_console_setup); | |
2498 | OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart", | |
2499 | s5pv210_early_console_setup); | |
2500 | EARLYCON_DECLARE(s5pv210, s5pv210_early_console_setup); | |
2501 | EARLYCON_DECLARE(exynos4210, s5pv210_early_console_setup); | |
c3bda295 | 2502 | #endif |
b94ba032 | 2503 | |
da121506 | 2504 | MODULE_ALIAS("platform:samsung-uart"); |
b497549a BD |
2505 | MODULE_DESCRIPTION("Samsung SoC Serial port driver"); |
2506 | MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); | |
2507 | MODULE_LICENSE("GPL v2"); |