Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
1da177e4 LT |
2 | * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) |
3 | * | |
f43dc23d | 4 | * Copyright (C) 2002 - 2011 Paul Mundt |
3ea6bc3d | 5 | * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007). |
1da177e4 LT |
6 | * |
7 | * based off of the old drivers/char/sh-sci.c by: | |
8 | * | |
9 | * Copyright (C) 1999, 2000 Niibe Yutaka | |
10 | * Copyright (C) 2000 Sugioka Toshinobu | |
11 | * Modified to support multiple serial ports. Stuart Menefy (May 2000). | |
12 | * Modified to support SecureEdge. David McCullough (2002) | |
13 | * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003). | |
d89ddd1c | 14 | * Removed SH7300 support (Jul 2007). |
1da177e4 LT |
15 | * |
16 | * This file is subject to the terms and conditions of the GNU General Public | |
17 | * License. See the file "COPYING" in the main directory of this archive | |
18 | * for more details. | |
19 | */ | |
0b3d4ef6 PM |
20 | #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) |
21 | #define SUPPORT_SYSRQ | |
22 | #endif | |
1da177e4 LT |
23 | |
24 | #undef DEBUG | |
25 | ||
8fb9631c LP |
26 | #include <linux/clk.h> |
27 | #include <linux/console.h> | |
28 | #include <linux/ctype.h> | |
29 | #include <linux/cpufreq.h> | |
30 | #include <linux/delay.h> | |
31 | #include <linux/dmaengine.h> | |
32 | #include <linux/dma-mapping.h> | |
33 | #include <linux/err.h> | |
1da177e4 | 34 | #include <linux/errno.h> |
8fb9631c | 35 | #include <linux/init.h> |
1da177e4 | 36 | #include <linux/interrupt.h> |
1da177e4 | 37 | #include <linux/ioport.h> |
8fb9631c LP |
38 | #include <linux/major.h> |
39 | #include <linux/module.h> | |
1da177e4 | 40 | #include <linux/mm.h> |
1da177e4 | 41 | #include <linux/notifier.h> |
20bdcab8 | 42 | #include <linux/of.h> |
8fb9631c | 43 | #include <linux/platform_device.h> |
5e50d2d6 | 44 | #include <linux/pm_runtime.h> |
73a19e4c | 45 | #include <linux/scatterlist.h> |
8fb9631c LP |
46 | #include <linux/serial.h> |
47 | #include <linux/serial_sci.h> | |
48 | #include <linux/sh_dma.h> | |
5a0e3ad6 | 49 | #include <linux/slab.h> |
8fb9631c LP |
50 | #include <linux/string.h> |
51 | #include <linux/sysrq.h> | |
52 | #include <linux/timer.h> | |
53 | #include <linux/tty.h> | |
54 | #include <linux/tty_flip.h> | |
85f094ec PM |
55 | |
56 | #ifdef CONFIG_SUPERH | |
1da177e4 LT |
57 | #include <asm/sh_bios.h> |
58 | #endif | |
59 | ||
1da177e4 LT |
60 | #include "sh-sci.h" |
61 | ||
89b5c1ab LP |
62 | /* Offsets into the sci_port->irqs array */ |
63 | enum { | |
64 | SCIx_ERI_IRQ, | |
65 | SCIx_RXI_IRQ, | |
66 | SCIx_TXI_IRQ, | |
67 | SCIx_BRI_IRQ, | |
68 | SCIx_NR_IRQS, | |
69 | ||
70 | SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */ | |
71 | }; | |
72 | ||
73 | #define SCIx_IRQ_IS_MUXED(port) \ | |
74 | ((port)->irqs[SCIx_ERI_IRQ] == \ | |
75 | (port)->irqs[SCIx_RXI_IRQ]) || \ | |
76 | ((port)->irqs[SCIx_ERI_IRQ] && \ | |
77 | ((port)->irqs[SCIx_RXI_IRQ] < 0)) | |
78 | ||
e108b2ca PM |
79 | struct sci_port { |
80 | struct uart_port port; | |
81 | ||
ce6738b6 PM |
82 | /* Platform configuration */ |
83 | struct plat_sci_port *cfg; | |
2e0842a1 | 84 | unsigned int overrun_reg; |
75c249fd | 85 | unsigned int overrun_mask; |
3ae988d9 | 86 | unsigned int error_mask; |
5da0f468 | 87 | unsigned int error_clear; |
ec09c5eb | 88 | unsigned int sampling_rate; |
e4d6f911 | 89 | resource_size_t reg_size; |
e108b2ca | 90 | |
e108b2ca PM |
91 | /* Break timer */ |
92 | struct timer_list break_timer; | |
93 | int break_flag; | |
1534a3b3 | 94 | |
501b825d MD |
95 | /* Interface clock */ |
96 | struct clk *iclk; | |
c7ed1ab3 PM |
97 | /* Function clock */ |
98 | struct clk *fclk; | |
edad1f20 | 99 | |
1fcc91a6 | 100 | int irqs[SCIx_NR_IRQS]; |
9174fc8f PM |
101 | char *irqstr[SCIx_NR_IRQS]; |
102 | ||
73a19e4c GL |
103 | struct dma_chan *chan_tx; |
104 | struct dma_chan *chan_rx; | |
f43dc23d | 105 | |
73a19e4c | 106 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
73a19e4c GL |
107 | dma_cookie_t cookie_tx; |
108 | dma_cookie_t cookie_rx[2]; | |
109 | dma_cookie_t active_rx; | |
79904420 GU |
110 | dma_addr_t tx_dma_addr; |
111 | unsigned int tx_dma_len; | |
73a19e4c | 112 | struct scatterlist sg_rx[2]; |
7b39d901 | 113 | void *rx_buf[2]; |
73a19e4c GL |
114 | size_t buf_len_rx; |
115 | struct sh_dmae_slave param_tx; | |
116 | struct sh_dmae_slave param_rx; | |
117 | struct work_struct work_tx; | |
73a19e4c | 118 | struct timer_list rx_timer; |
3089f381 | 119 | unsigned int rx_timeout; |
73a19e4c | 120 | #endif |
e552de24 | 121 | |
d535a230 | 122 | struct notifier_block freq_transition; |
e108b2ca PM |
123 | }; |
124 | ||
e108b2ca | 125 | #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS |
b7a76e4b | 126 | |
e108b2ca PM |
127 | static struct sci_port sci_ports[SCI_NPORTS]; |
128 | static struct uart_driver sci_uart_driver; | |
1da177e4 | 129 | |
e7c98dc7 MT |
130 | static inline struct sci_port * |
131 | to_sci_port(struct uart_port *uart) | |
132 | { | |
133 | return container_of(uart, struct sci_port, port); | |
134 | } | |
135 | ||
61a6976b PM |
136 | struct plat_sci_reg { |
137 | u8 offset, size; | |
138 | }; | |
139 | ||
140 | /* Helper for invalidating specific entries of an inherited map. */ | |
141 | #define sci_reg_invalid { .offset = 0, .size = 0 } | |
142 | ||
d3184e68 | 143 | static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { |
61a6976b PM |
144 | [SCIx_PROBE_REGTYPE] = { |
145 | [0 ... SCIx_NR_REGS - 1] = sci_reg_invalid, | |
146 | }, | |
147 | ||
148 | /* | |
149 | * Common SCI definitions, dependent on the port's regshift | |
150 | * value. | |
151 | */ | |
152 | [SCIx_SCI_REGTYPE] = { | |
153 | [SCSMR] = { 0x00, 8 }, | |
154 | [SCBRR] = { 0x01, 8 }, | |
155 | [SCSCR] = { 0x02, 8 }, | |
156 | [SCxTDR] = { 0x03, 8 }, | |
157 | [SCxSR] = { 0x04, 8 }, | |
158 | [SCxRDR] = { 0x05, 8 }, | |
159 | [SCFCR] = sci_reg_invalid, | |
160 | [SCFDR] = sci_reg_invalid, | |
161 | [SCTFDR] = sci_reg_invalid, | |
162 | [SCRFDR] = sci_reg_invalid, | |
163 | [SCSPTR] = sci_reg_invalid, | |
164 | [SCLSR] = sci_reg_invalid, | |
f303b364 | 165 | [HSSRR] = sci_reg_invalid, |
c097abc3 GU |
166 | [SCPCR] = sci_reg_invalid, |
167 | [SCPDR] = sci_reg_invalid, | |
61a6976b PM |
168 | }, |
169 | ||
170 | /* | |
171 | * Common definitions for legacy IrDA ports, dependent on | |
172 | * regshift value. | |
173 | */ | |
174 | [SCIx_IRDA_REGTYPE] = { | |
175 | [SCSMR] = { 0x00, 8 }, | |
176 | [SCBRR] = { 0x01, 8 }, | |
177 | [SCSCR] = { 0x02, 8 }, | |
178 | [SCxTDR] = { 0x03, 8 }, | |
179 | [SCxSR] = { 0x04, 8 }, | |
180 | [SCxRDR] = { 0x05, 8 }, | |
181 | [SCFCR] = { 0x06, 8 }, | |
182 | [SCFDR] = { 0x07, 16 }, | |
183 | [SCTFDR] = sci_reg_invalid, | |
184 | [SCRFDR] = sci_reg_invalid, | |
185 | [SCSPTR] = sci_reg_invalid, | |
186 | [SCLSR] = sci_reg_invalid, | |
f303b364 | 187 | [HSSRR] = sci_reg_invalid, |
c097abc3 GU |
188 | [SCPCR] = sci_reg_invalid, |
189 | [SCPDR] = sci_reg_invalid, | |
61a6976b PM |
190 | }, |
191 | ||
192 | /* | |
193 | * Common SCIFA definitions. | |
194 | */ | |
195 | [SCIx_SCIFA_REGTYPE] = { | |
196 | [SCSMR] = { 0x00, 16 }, | |
197 | [SCBRR] = { 0x04, 8 }, | |
198 | [SCSCR] = { 0x08, 16 }, | |
199 | [SCxTDR] = { 0x20, 8 }, | |
200 | [SCxSR] = { 0x14, 16 }, | |
201 | [SCxRDR] = { 0x24, 8 }, | |
202 | [SCFCR] = { 0x18, 16 }, | |
203 | [SCFDR] = { 0x1c, 16 }, | |
204 | [SCTFDR] = sci_reg_invalid, | |
205 | [SCRFDR] = sci_reg_invalid, | |
206 | [SCSPTR] = sci_reg_invalid, | |
207 | [SCLSR] = sci_reg_invalid, | |
f303b364 | 208 | [HSSRR] = sci_reg_invalid, |
c097abc3 GU |
209 | [SCPCR] = { 0x30, 16 }, |
210 | [SCPDR] = { 0x34, 16 }, | |
61a6976b PM |
211 | }, |
212 | ||
213 | /* | |
214 | * Common SCIFB definitions. | |
215 | */ | |
216 | [SCIx_SCIFB_REGTYPE] = { | |
217 | [SCSMR] = { 0x00, 16 }, | |
218 | [SCBRR] = { 0x04, 8 }, | |
219 | [SCSCR] = { 0x08, 16 }, | |
220 | [SCxTDR] = { 0x40, 8 }, | |
221 | [SCxSR] = { 0x14, 16 }, | |
222 | [SCxRDR] = { 0x60, 8 }, | |
223 | [SCFCR] = { 0x18, 16 }, | |
8c66d6d2 TY |
224 | [SCFDR] = sci_reg_invalid, |
225 | [SCTFDR] = { 0x38, 16 }, | |
226 | [SCRFDR] = { 0x3c, 16 }, | |
61a6976b PM |
227 | [SCSPTR] = sci_reg_invalid, |
228 | [SCLSR] = sci_reg_invalid, | |
f303b364 | 229 | [HSSRR] = sci_reg_invalid, |
c097abc3 GU |
230 | [SCPCR] = { 0x30, 16 }, |
231 | [SCPDR] = { 0x34, 16 }, | |
61a6976b PM |
232 | }, |
233 | ||
3af1f8a4 PE |
234 | /* |
235 | * Common SH-2(A) SCIF definitions for ports with FIFO data | |
236 | * count registers. | |
237 | */ | |
238 | [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = { | |
239 | [SCSMR] = { 0x00, 16 }, | |
240 | [SCBRR] = { 0x04, 8 }, | |
241 | [SCSCR] = { 0x08, 16 }, | |
242 | [SCxTDR] = { 0x0c, 8 }, | |
243 | [SCxSR] = { 0x10, 16 }, | |
244 | [SCxRDR] = { 0x14, 8 }, | |
245 | [SCFCR] = { 0x18, 16 }, | |
246 | [SCFDR] = { 0x1c, 16 }, | |
247 | [SCTFDR] = sci_reg_invalid, | |
248 | [SCRFDR] = sci_reg_invalid, | |
249 | [SCSPTR] = { 0x20, 16 }, | |
250 | [SCLSR] = { 0x24, 16 }, | |
f303b364 | 251 | [HSSRR] = sci_reg_invalid, |
c097abc3 GU |
252 | [SCPCR] = sci_reg_invalid, |
253 | [SCPDR] = sci_reg_invalid, | |
3af1f8a4 PE |
254 | }, |
255 | ||
61a6976b PM |
256 | /* |
257 | * Common SH-3 SCIF definitions. | |
258 | */ | |
259 | [SCIx_SH3_SCIF_REGTYPE] = { | |
260 | [SCSMR] = { 0x00, 8 }, | |
261 | [SCBRR] = { 0x02, 8 }, | |
262 | [SCSCR] = { 0x04, 8 }, | |
263 | [SCxTDR] = { 0x06, 8 }, | |
264 | [SCxSR] = { 0x08, 16 }, | |
265 | [SCxRDR] = { 0x0a, 8 }, | |
266 | [SCFCR] = { 0x0c, 8 }, | |
267 | [SCFDR] = { 0x0e, 16 }, | |
268 | [SCTFDR] = sci_reg_invalid, | |
269 | [SCRFDR] = sci_reg_invalid, | |
270 | [SCSPTR] = sci_reg_invalid, | |
271 | [SCLSR] = sci_reg_invalid, | |
f303b364 | 272 | [HSSRR] = sci_reg_invalid, |
c097abc3 GU |
273 | [SCPCR] = sci_reg_invalid, |
274 | [SCPDR] = sci_reg_invalid, | |
61a6976b PM |
275 | }, |
276 | ||
277 | /* | |
278 | * Common SH-4(A) SCIF(B) definitions. | |
279 | */ | |
280 | [SCIx_SH4_SCIF_REGTYPE] = { | |
281 | [SCSMR] = { 0x00, 16 }, | |
282 | [SCBRR] = { 0x04, 8 }, | |
283 | [SCSCR] = { 0x08, 16 }, | |
284 | [SCxTDR] = { 0x0c, 8 }, | |
285 | [SCxSR] = { 0x10, 16 }, | |
286 | [SCxRDR] = { 0x14, 8 }, | |
287 | [SCFCR] = { 0x18, 16 }, | |
288 | [SCFDR] = { 0x1c, 16 }, | |
289 | [SCTFDR] = sci_reg_invalid, | |
290 | [SCRFDR] = sci_reg_invalid, | |
291 | [SCSPTR] = { 0x20, 16 }, | |
292 | [SCLSR] = { 0x24, 16 }, | |
f303b364 | 293 | [HSSRR] = sci_reg_invalid, |
c097abc3 GU |
294 | [SCPCR] = sci_reg_invalid, |
295 | [SCPDR] = sci_reg_invalid, | |
f303b364 UH |
296 | }, |
297 | ||
298 | /* | |
299 | * Common HSCIF definitions. | |
300 | */ | |
301 | [SCIx_HSCIF_REGTYPE] = { | |
302 | [SCSMR] = { 0x00, 16 }, | |
303 | [SCBRR] = { 0x04, 8 }, | |
304 | [SCSCR] = { 0x08, 16 }, | |
305 | [SCxTDR] = { 0x0c, 8 }, | |
306 | [SCxSR] = { 0x10, 16 }, | |
307 | [SCxRDR] = { 0x14, 8 }, | |
308 | [SCFCR] = { 0x18, 16 }, | |
309 | [SCFDR] = { 0x1c, 16 }, | |
310 | [SCTFDR] = sci_reg_invalid, | |
311 | [SCRFDR] = sci_reg_invalid, | |
312 | [SCSPTR] = { 0x20, 16 }, | |
313 | [SCLSR] = { 0x24, 16 }, | |
314 | [HSSRR] = { 0x40, 16 }, | |
c097abc3 GU |
315 | [SCPCR] = sci_reg_invalid, |
316 | [SCPDR] = sci_reg_invalid, | |
61a6976b PM |
317 | }, |
318 | ||
319 | /* | |
320 | * Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR | |
321 | * register. | |
322 | */ | |
323 | [SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = { | |
324 | [SCSMR] = { 0x00, 16 }, | |
325 | [SCBRR] = { 0x04, 8 }, | |
326 | [SCSCR] = { 0x08, 16 }, | |
327 | [SCxTDR] = { 0x0c, 8 }, | |
328 | [SCxSR] = { 0x10, 16 }, | |
329 | [SCxRDR] = { 0x14, 8 }, | |
330 | [SCFCR] = { 0x18, 16 }, | |
331 | [SCFDR] = { 0x1c, 16 }, | |
332 | [SCTFDR] = sci_reg_invalid, | |
333 | [SCRFDR] = sci_reg_invalid, | |
334 | [SCSPTR] = sci_reg_invalid, | |
335 | [SCLSR] = { 0x24, 16 }, | |
f303b364 | 336 | [HSSRR] = sci_reg_invalid, |
c097abc3 GU |
337 | [SCPCR] = sci_reg_invalid, |
338 | [SCPDR] = sci_reg_invalid, | |
61a6976b PM |
339 | }, |
340 | ||
341 | /* | |
342 | * Common SH-4(A) SCIF(B) definitions for ports with FIFO data | |
343 | * count registers. | |
344 | */ | |
345 | [SCIx_SH4_SCIF_FIFODATA_REGTYPE] = { | |
346 | [SCSMR] = { 0x00, 16 }, | |
347 | [SCBRR] = { 0x04, 8 }, | |
348 | [SCSCR] = { 0x08, 16 }, | |
349 | [SCxTDR] = { 0x0c, 8 }, | |
350 | [SCxSR] = { 0x10, 16 }, | |
351 | [SCxRDR] = { 0x14, 8 }, | |
352 | [SCFCR] = { 0x18, 16 }, | |
353 | [SCFDR] = { 0x1c, 16 }, | |
354 | [SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */ | |
355 | [SCRFDR] = { 0x20, 16 }, | |
356 | [SCSPTR] = { 0x24, 16 }, | |
357 | [SCLSR] = { 0x28, 16 }, | |
f303b364 | 358 | [HSSRR] = sci_reg_invalid, |
c097abc3 GU |
359 | [SCPCR] = sci_reg_invalid, |
360 | [SCPDR] = sci_reg_invalid, | |
61a6976b PM |
361 | }, |
362 | ||
363 | /* | |
364 | * SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR | |
365 | * registers. | |
366 | */ | |
367 | [SCIx_SH7705_SCIF_REGTYPE] = { | |
368 | [SCSMR] = { 0x00, 16 }, | |
369 | [SCBRR] = { 0x04, 8 }, | |
370 | [SCSCR] = { 0x08, 16 }, | |
371 | [SCxTDR] = { 0x20, 8 }, | |
372 | [SCxSR] = { 0x14, 16 }, | |
373 | [SCxRDR] = { 0x24, 8 }, | |
374 | [SCFCR] = { 0x18, 16 }, | |
375 | [SCFDR] = { 0x1c, 16 }, | |
376 | [SCTFDR] = sci_reg_invalid, | |
377 | [SCRFDR] = sci_reg_invalid, | |
378 | [SCSPTR] = sci_reg_invalid, | |
379 | [SCLSR] = sci_reg_invalid, | |
f303b364 | 380 | [HSSRR] = sci_reg_invalid, |
c097abc3 GU |
381 | [SCPCR] = sci_reg_invalid, |
382 | [SCPDR] = sci_reg_invalid, | |
61a6976b PM |
383 | }, |
384 | }; | |
385 | ||
72b294cf PM |
386 | #define sci_getreg(up, offset) (sci_regmap[to_sci_port(up)->cfg->regtype] + offset) |
387 | ||
61a6976b PM |
388 | /* |
389 | * The "offset" here is rather misleading, in that it refers to an enum | |
390 | * value relative to the port mapping rather than the fixed offset | |
391 | * itself, which needs to be manually retrieved from the platform's | |
392 | * register map for the given port. | |
393 | */ | |
394 | static unsigned int sci_serial_in(struct uart_port *p, int offset) | |
395 | { | |
d3184e68 | 396 | const struct plat_sci_reg *reg = sci_getreg(p, offset); |
61a6976b PM |
397 | |
398 | if (reg->size == 8) | |
399 | return ioread8(p->membase + (reg->offset << p->regshift)); | |
400 | else if (reg->size == 16) | |
401 | return ioread16(p->membase + (reg->offset << p->regshift)); | |
402 | else | |
403 | WARN(1, "Invalid register access\n"); | |
404 | ||
405 | return 0; | |
406 | } | |
407 | ||
408 | static void sci_serial_out(struct uart_port *p, int offset, int value) | |
409 | { | |
d3184e68 | 410 | const struct plat_sci_reg *reg = sci_getreg(p, offset); |
61a6976b PM |
411 | |
412 | if (reg->size == 8) | |
413 | iowrite8(value, p->membase + (reg->offset << p->regshift)); | |
414 | else if (reg->size == 16) | |
415 | iowrite16(value, p->membase + (reg->offset << p->regshift)); | |
416 | else | |
417 | WARN(1, "Invalid register access\n"); | |
418 | } | |
419 | ||
61a6976b PM |
420 | static int sci_probe_regmap(struct plat_sci_port *cfg) |
421 | { | |
422 | switch (cfg->type) { | |
423 | case PORT_SCI: | |
424 | cfg->regtype = SCIx_SCI_REGTYPE; | |
425 | break; | |
426 | case PORT_IRDA: | |
427 | cfg->regtype = SCIx_IRDA_REGTYPE; | |
428 | break; | |
429 | case PORT_SCIFA: | |
430 | cfg->regtype = SCIx_SCIFA_REGTYPE; | |
431 | break; | |
432 | case PORT_SCIFB: | |
433 | cfg->regtype = SCIx_SCIFB_REGTYPE; | |
434 | break; | |
435 | case PORT_SCIF: | |
436 | /* | |
437 | * The SH-4 is a bit of a misnomer here, although that's | |
438 | * where this particular port layout originated. This | |
439 | * configuration (or some slight variation thereof) | |
440 | * remains the dominant model for all SCIFs. | |
441 | */ | |
442 | cfg->regtype = SCIx_SH4_SCIF_REGTYPE; | |
443 | break; | |
f303b364 UH |
444 | case PORT_HSCIF: |
445 | cfg->regtype = SCIx_HSCIF_REGTYPE; | |
446 | break; | |
61a6976b | 447 | default: |
6c13d5d2 | 448 | pr_err("Can't probe register map for given port\n"); |
61a6976b PM |
449 | return -EINVAL; |
450 | } | |
451 | ||
452 | return 0; | |
453 | } | |
454 | ||
23241d43 PM |
455 | static void sci_port_enable(struct sci_port *sci_port) |
456 | { | |
457 | if (!sci_port->port.dev) | |
458 | return; | |
459 | ||
460 | pm_runtime_get_sync(sci_port->port.dev); | |
461 | ||
b016b646 | 462 | clk_prepare_enable(sci_port->iclk); |
23241d43 | 463 | sci_port->port.uartclk = clk_get_rate(sci_port->iclk); |
b016b646 | 464 | clk_prepare_enable(sci_port->fclk); |
23241d43 PM |
465 | } |
466 | ||
467 | static void sci_port_disable(struct sci_port *sci_port) | |
468 | { | |
469 | if (!sci_port->port.dev) | |
470 | return; | |
471 | ||
caec7038 LP |
472 | /* Cancel the break timer to ensure that the timer handler will not try |
473 | * to access the hardware with clocks and power disabled. Reset the | |
474 | * break flag to make the break debouncing state machine ready for the | |
475 | * next break. | |
476 | */ | |
477 | del_timer_sync(&sci_port->break_timer); | |
478 | sci_port->break_flag = 0; | |
479 | ||
b016b646 LP |
480 | clk_disable_unprepare(sci_port->fclk); |
481 | clk_disable_unprepare(sci_port->iclk); | |
23241d43 PM |
482 | |
483 | pm_runtime_put_sync(sci_port->port.dev); | |
484 | } | |
485 | ||
e1910fcd GU |
486 | static inline unsigned long port_rx_irq_mask(struct uart_port *port) |
487 | { | |
488 | /* | |
489 | * Not all ports (such as SCIFA) will support REIE. Rather than | |
490 | * special-casing the port type, we check the port initialization | |
491 | * IRQ enable mask to see whether the IRQ is desired at all. If | |
492 | * it's unset, it's logically inferred that there's no point in | |
493 | * testing for it. | |
494 | */ | |
495 | return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE); | |
496 | } | |
497 | ||
498 | static void sci_start_tx(struct uart_port *port) | |
499 | { | |
500 | struct sci_port *s = to_sci_port(port); | |
501 | unsigned short ctrl; | |
502 | ||
503 | #ifdef CONFIG_SERIAL_SH_SCI_DMA | |
504 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { | |
505 | u16 new, scr = serial_port_in(port, SCSCR); | |
506 | if (s->chan_tx) | |
507 | new = scr | SCSCR_TDRQE; | |
508 | else | |
509 | new = scr & ~SCSCR_TDRQE; | |
510 | if (new != scr) | |
511 | serial_port_out(port, SCSCR, new); | |
512 | } | |
513 | ||
514 | if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && | |
515 | dma_submit_error(s->cookie_tx)) { | |
516 | s->cookie_tx = 0; | |
517 | schedule_work(&s->work_tx); | |
518 | } | |
519 | #endif | |
520 | ||
521 | if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { | |
522 | /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ | |
523 | ctrl = serial_port_in(port, SCSCR); | |
524 | serial_port_out(port, SCSCR, ctrl | SCSCR_TIE); | |
525 | } | |
526 | } | |
527 | ||
528 | static void sci_stop_tx(struct uart_port *port) | |
529 | { | |
530 | unsigned short ctrl; | |
531 | ||
532 | /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ | |
533 | ctrl = serial_port_in(port, SCSCR); | |
534 | ||
535 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) | |
536 | ctrl &= ~SCSCR_TDRQE; | |
537 | ||
538 | ctrl &= ~SCSCR_TIE; | |
539 | ||
540 | serial_port_out(port, SCSCR, ctrl); | |
541 | } | |
542 | ||
543 | static void sci_start_rx(struct uart_port *port) | |
544 | { | |
545 | unsigned short ctrl; | |
546 | ||
547 | ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port); | |
548 | ||
549 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) | |
550 | ctrl &= ~SCSCR_RDRQE; | |
551 | ||
552 | serial_port_out(port, SCSCR, ctrl); | |
553 | } | |
554 | ||
555 | static void sci_stop_rx(struct uart_port *port) | |
556 | { | |
557 | unsigned short ctrl; | |
558 | ||
559 | ctrl = serial_port_in(port, SCSCR); | |
560 | ||
561 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) | |
562 | ctrl &= ~SCSCR_RDRQE; | |
563 | ||
564 | ctrl &= ~port_rx_irq_mask(port); | |
565 | ||
566 | serial_port_out(port, SCSCR, ctrl); | |
567 | } | |
568 | ||
a1b5b43f GU |
569 | static void sci_clear_SCxSR(struct uart_port *port, unsigned int mask) |
570 | { | |
571 | if (port->type == PORT_SCI) { | |
572 | /* Just store the mask */ | |
573 | serial_port_out(port, SCxSR, mask); | |
574 | } else if (to_sci_port(port)->overrun_mask == SCIFA_ORER) { | |
575 | /* SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 */ | |
576 | /* Only clear the status bits we want to clear */ | |
577 | serial_port_out(port, SCxSR, | |
578 | serial_port_in(port, SCxSR) & mask); | |
579 | } else { | |
580 | /* Store the mask, clear parity/framing errors */ | |
581 | serial_port_out(port, SCxSR, mask & ~(SCIF_FERC | SCIF_PERC)); | |
582 | } | |
583 | } | |
584 | ||
07d2a1a1 | 585 | #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) |
1f6fd5c9 PM |
586 | |
587 | #ifdef CONFIG_CONSOLE_POLL | |
07d2a1a1 | 588 | static int sci_poll_get_char(struct uart_port *port) |
1da177e4 | 589 | { |
1da177e4 LT |
590 | unsigned short status; |
591 | int c; | |
592 | ||
e108b2ca | 593 | do { |
b12bb29f | 594 | status = serial_port_in(port, SCxSR); |
1da177e4 | 595 | if (status & SCxSR_ERRORS(port)) { |
a1b5b43f | 596 | sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port)); |
1da177e4 LT |
597 | continue; |
598 | } | |
3f255eb3 JW |
599 | break; |
600 | } while (1); | |
601 | ||
602 | if (!(status & SCxSR_RDxF(port))) | |
603 | return NO_POLL_CHAR; | |
07d2a1a1 | 604 | |
b12bb29f | 605 | c = serial_port_in(port, SCxRDR); |
07d2a1a1 | 606 | |
e7c98dc7 | 607 | /* Dummy read */ |
b12bb29f | 608 | serial_port_in(port, SCxSR); |
a1b5b43f | 609 | sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); |
1da177e4 LT |
610 | |
611 | return c; | |
612 | } | |
1f6fd5c9 | 613 | #endif |
1da177e4 | 614 | |
07d2a1a1 | 615 | static void sci_poll_put_char(struct uart_port *port, unsigned char c) |
1da177e4 | 616 | { |
1da177e4 LT |
617 | unsigned short status; |
618 | ||
1da177e4 | 619 | do { |
b12bb29f | 620 | status = serial_port_in(port, SCxSR); |
1da177e4 LT |
621 | } while (!(status & SCxSR_TDxE(port))); |
622 | ||
b12bb29f | 623 | serial_port_out(port, SCxTDR, c); |
a1b5b43f | 624 | sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); |
1da177e4 | 625 | } |
07d2a1a1 | 626 | #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ |
1da177e4 | 627 | |
61a6976b | 628 | static void sci_init_pins(struct uart_port *port, unsigned int cflag) |
1da177e4 | 629 | { |
61a6976b | 630 | struct sci_port *s = to_sci_port(port); |
d3184e68 | 631 | const struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; |
1da177e4 | 632 | |
61a6976b PM |
633 | /* |
634 | * Use port-specific handler if provided. | |
635 | */ | |
636 | if (s->cfg->ops && s->cfg->ops->init_pins) { | |
637 | s->cfg->ops->init_pins(port, cflag); | |
638 | return; | |
1da177e4 | 639 | } |
41504c39 | 640 | |
61a6976b PM |
641 | /* |
642 | * For the generic path SCSPTR is necessary. Bail out if that's | |
643 | * unavailable, too. | |
644 | */ | |
645 | if (!reg->size) | |
646 | return; | |
41504c39 | 647 | |
faf02f8f PM |
648 | if ((s->cfg->capabilities & SCIx_HAVE_RTSCTS) && |
649 | ((!(cflag & CRTSCTS)))) { | |
650 | unsigned short status; | |
651 | ||
b12bb29f | 652 | status = serial_port_in(port, SCSPTR); |
faf02f8f PM |
653 | status &= ~SCSPTR_CTSIO; |
654 | status |= SCSPTR_RTSIO; | |
b12bb29f | 655 | serial_port_out(port, SCSPTR, status); /* Set RTS = 1 */ |
faf02f8f | 656 | } |
d5701647 | 657 | } |
e108b2ca | 658 | |
72b294cf | 659 | static int sci_txfill(struct uart_port *port) |
e108b2ca | 660 | { |
d3184e68 | 661 | const struct plat_sci_reg *reg; |
e108b2ca | 662 | |
72b294cf PM |
663 | reg = sci_getreg(port, SCTFDR); |
664 | if (reg->size) | |
63f7ad11 | 665 | return serial_port_in(port, SCTFDR) & ((port->fifosize << 1) - 1); |
c63847a3 | 666 | |
72b294cf PM |
667 | reg = sci_getreg(port, SCFDR); |
668 | if (reg->size) | |
b12bb29f | 669 | return serial_port_in(port, SCFDR) >> 8; |
d1d4b10c | 670 | |
b12bb29f | 671 | return !(serial_port_in(port, SCxSR) & SCI_TDRE); |
e108b2ca PM |
672 | } |
673 | ||
73a19e4c GL |
674 | static int sci_txroom(struct uart_port *port) |
675 | { | |
72b294cf | 676 | return port->fifosize - sci_txfill(port); |
73a19e4c GL |
677 | } |
678 | ||
679 | static int sci_rxfill(struct uart_port *port) | |
e108b2ca | 680 | { |
d3184e68 | 681 | const struct plat_sci_reg *reg; |
72b294cf PM |
682 | |
683 | reg = sci_getreg(port, SCRFDR); | |
684 | if (reg->size) | |
63f7ad11 | 685 | return serial_port_in(port, SCRFDR) & ((port->fifosize << 1) - 1); |
72b294cf PM |
686 | |
687 | reg = sci_getreg(port, SCFDR); | |
688 | if (reg->size) | |
b12bb29f | 689 | return serial_port_in(port, SCFDR) & ((port->fifosize << 1) - 1); |
72b294cf | 690 | |
b12bb29f | 691 | return (serial_port_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; |
e108b2ca PM |
692 | } |
693 | ||
514820eb PM |
694 | /* |
695 | * SCI helper for checking the state of the muxed port/RXD pins. | |
696 | */ | |
697 | static inline int sci_rxd_in(struct uart_port *port) | |
698 | { | |
699 | struct sci_port *s = to_sci_port(port); | |
700 | ||
701 | if (s->cfg->port_reg <= 0) | |
702 | return 1; | |
703 | ||
0dd4d5cb | 704 | /* Cast for ARM damage */ |
e2afca69 | 705 | return !!__raw_readb((void __iomem *)(uintptr_t)s->cfg->port_reg); |
514820eb PM |
706 | } |
707 | ||
1da177e4 LT |
708 | /* ********************************************************************** * |
709 | * the interrupt related routines * | |
710 | * ********************************************************************** */ | |
711 | ||
712 | static void sci_transmit_chars(struct uart_port *port) | |
713 | { | |
ebd2c8f6 | 714 | struct circ_buf *xmit = &port->state->xmit; |
1da177e4 | 715 | unsigned int stopped = uart_tx_stopped(port); |
1da177e4 LT |
716 | unsigned short status; |
717 | unsigned short ctrl; | |
e108b2ca | 718 | int count; |
1da177e4 | 719 | |
b12bb29f | 720 | status = serial_port_in(port, SCxSR); |
1da177e4 | 721 | if (!(status & SCxSR_TDxE(port))) { |
b12bb29f | 722 | ctrl = serial_port_in(port, SCSCR); |
e7c98dc7 | 723 | if (uart_circ_empty(xmit)) |
8e698614 | 724 | ctrl &= ~SCSCR_TIE; |
e7c98dc7 | 725 | else |
8e698614 | 726 | ctrl |= SCSCR_TIE; |
b12bb29f | 727 | serial_port_out(port, SCSCR, ctrl); |
1da177e4 LT |
728 | return; |
729 | } | |
730 | ||
72b294cf | 731 | count = sci_txroom(port); |
1da177e4 LT |
732 | |
733 | do { | |
734 | unsigned char c; | |
735 | ||
736 | if (port->x_char) { | |
737 | c = port->x_char; | |
738 | port->x_char = 0; | |
739 | } else if (!uart_circ_empty(xmit) && !stopped) { | |
740 | c = xmit->buf[xmit->tail]; | |
741 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
742 | } else { | |
743 | break; | |
744 | } | |
745 | ||
b12bb29f | 746 | serial_port_out(port, SCxTDR, c); |
1da177e4 LT |
747 | |
748 | port->icount.tx++; | |
749 | } while (--count > 0); | |
750 | ||
a1b5b43f | 751 | sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port)); |
1da177e4 LT |
752 | |
753 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
754 | uart_write_wakeup(port); | |
755 | if (uart_circ_empty(xmit)) { | |
b129a8cc | 756 | sci_stop_tx(port); |
1da177e4 | 757 | } else { |
b12bb29f | 758 | ctrl = serial_port_in(port, SCSCR); |
1da177e4 | 759 | |
1a22f08d | 760 | if (port->type != PORT_SCI) { |
b12bb29f | 761 | serial_port_in(port, SCxSR); /* Dummy read */ |
a1b5b43f | 762 | sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port)); |
1da177e4 | 763 | } |
1da177e4 | 764 | |
8e698614 | 765 | ctrl |= SCSCR_TIE; |
b12bb29f | 766 | serial_port_out(port, SCSCR, ctrl); |
1da177e4 LT |
767 | } |
768 | } | |
769 | ||
770 | /* On SH3, SCIF may read end-of-break as a space->mark char */ | |
e7c98dc7 | 771 | #define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); }) |
1da177e4 | 772 | |
94c8b6db | 773 | static void sci_receive_chars(struct uart_port *port) |
1da177e4 | 774 | { |
e7c98dc7 | 775 | struct sci_port *sci_port = to_sci_port(port); |
227434f8 | 776 | struct tty_port *tport = &port->state->port; |
1da177e4 LT |
777 | int i, count, copied = 0; |
778 | unsigned short status; | |
33f0f88f | 779 | unsigned char flag; |
1da177e4 | 780 | |
b12bb29f | 781 | status = serial_port_in(port, SCxSR); |
1da177e4 LT |
782 | if (!(status & SCxSR_RDxF(port))) |
783 | return; | |
784 | ||
785 | while (1) { | |
1da177e4 | 786 | /* Don't copy more bytes than there is room for in the buffer */ |
227434f8 | 787 | count = tty_buffer_request_room(tport, sci_rxfill(port)); |
1da177e4 LT |
788 | |
789 | /* If for any reason we can't copy more data, we're done! */ | |
790 | if (count == 0) | |
791 | break; | |
792 | ||
793 | if (port->type == PORT_SCI) { | |
b12bb29f | 794 | char c = serial_port_in(port, SCxRDR); |
e7c98dc7 MT |
795 | if (uart_handle_sysrq_char(port, c) || |
796 | sci_port->break_flag) | |
1da177e4 | 797 | count = 0; |
e7c98dc7 | 798 | else |
92a19f9c | 799 | tty_insert_flip_char(tport, c, TTY_NORMAL); |
1da177e4 | 800 | } else { |
e7c98dc7 | 801 | for (i = 0; i < count; i++) { |
b12bb29f | 802 | char c = serial_port_in(port, SCxRDR); |
d97fbbed | 803 | |
b12bb29f | 804 | status = serial_port_in(port, SCxSR); |
1da177e4 LT |
805 | #if defined(CONFIG_CPU_SH3) |
806 | /* Skip "chars" during break */ | |
e108b2ca | 807 | if (sci_port->break_flag) { |
1da177e4 LT |
808 | if ((c == 0) && |
809 | (status & SCxSR_FER(port))) { | |
810 | count--; i--; | |
811 | continue; | |
812 | } | |
e108b2ca | 813 | |
1da177e4 | 814 | /* Nonzero => end-of-break */ |
762c69e3 | 815 | dev_dbg(port->dev, "debounce<%02x>\n", c); |
e108b2ca PM |
816 | sci_port->break_flag = 0; |
817 | ||
1da177e4 LT |
818 | if (STEPFN(c)) { |
819 | count--; i--; | |
820 | continue; | |
821 | } | |
822 | } | |
823 | #endif /* CONFIG_CPU_SH3 */ | |
7d12e780 | 824 | if (uart_handle_sysrq_char(port, c)) { |
1da177e4 LT |
825 | count--; i--; |
826 | continue; | |
827 | } | |
828 | ||
829 | /* Store data and status */ | |
73a19e4c | 830 | if (status & SCxSR_FER(port)) { |
33f0f88f | 831 | flag = TTY_FRAME; |
d97fbbed | 832 | port->icount.frame++; |
762c69e3 | 833 | dev_notice(port->dev, "frame error\n"); |
73a19e4c | 834 | } else if (status & SCxSR_PER(port)) { |
33f0f88f | 835 | flag = TTY_PARITY; |
d97fbbed | 836 | port->icount.parity++; |
762c69e3 | 837 | dev_notice(port->dev, "parity error\n"); |
33f0f88f AC |
838 | } else |
839 | flag = TTY_NORMAL; | |
762c69e3 | 840 | |
92a19f9c | 841 | tty_insert_flip_char(tport, c, flag); |
1da177e4 LT |
842 | } |
843 | } | |
844 | ||
b12bb29f | 845 | serial_port_in(port, SCxSR); /* dummy read */ |
a1b5b43f | 846 | sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); |
1da177e4 | 847 | |
1da177e4 LT |
848 | copied += count; |
849 | port->icount.rx += count; | |
850 | } | |
851 | ||
852 | if (copied) { | |
853 | /* Tell the rest of the system the news. New characters! */ | |
2e124b4a | 854 | tty_flip_buffer_push(tport); |
1da177e4 | 855 | } else { |
b12bb29f | 856 | serial_port_in(port, SCxSR); /* dummy read */ |
a1b5b43f | 857 | sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); |
1da177e4 LT |
858 | } |
859 | } | |
860 | ||
861 | #define SCI_BREAK_JIFFIES (HZ/20) | |
94c8b6db PM |
862 | |
863 | /* | |
864 | * The sci generates interrupts during the break, | |
1da177e4 LT |
865 | * 1 per millisecond or so during the break period, for 9600 baud. |
866 | * So dont bother disabling interrupts. | |
867 | * But dont want more than 1 break event. | |
868 | * Use a kernel timer to periodically poll the rx line until | |
869 | * the break is finished. | |
870 | */ | |
94c8b6db | 871 | static inline void sci_schedule_break_timer(struct sci_port *port) |
1da177e4 | 872 | { |
bc9b3f5c | 873 | mod_timer(&port->break_timer, jiffies + SCI_BREAK_JIFFIES); |
1da177e4 | 874 | } |
94c8b6db | 875 | |
1da177e4 LT |
876 | /* Ensure that two consecutive samples find the break over. */ |
877 | static void sci_break_timer(unsigned long data) | |
878 | { | |
e108b2ca PM |
879 | struct sci_port *port = (struct sci_port *)data; |
880 | ||
881 | if (sci_rxd_in(&port->port) == 0) { | |
1da177e4 | 882 | port->break_flag = 1; |
e108b2ca PM |
883 | sci_schedule_break_timer(port); |
884 | } else if (port->break_flag == 1) { | |
1da177e4 LT |
885 | /* break is over. */ |
886 | port->break_flag = 2; | |
e108b2ca PM |
887 | sci_schedule_break_timer(port); |
888 | } else | |
889 | port->break_flag = 0; | |
1da177e4 LT |
890 | } |
891 | ||
94c8b6db | 892 | static int sci_handle_errors(struct uart_port *port) |
1da177e4 LT |
893 | { |
894 | int copied = 0; | |
b12bb29f | 895 | unsigned short status = serial_port_in(port, SCxSR); |
92a19f9c | 896 | struct tty_port *tport = &port->state->port; |
debf9507 | 897 | struct sci_port *s = to_sci_port(port); |
1da177e4 | 898 | |
3ae988d9 | 899 | /* Handle overruns */ |
75c249fd | 900 | if (status & s->overrun_mask) { |
3ae988d9 | 901 | port->icount.overrun++; |
d97fbbed | 902 | |
3ae988d9 LP |
903 | /* overrun error */ |
904 | if (tty_insert_flip_char(tport, 0, TTY_OVERRUN)) | |
905 | copied++; | |
762c69e3 | 906 | |
9b971cd2 | 907 | dev_notice(port->dev, "overrun error\n"); |
1da177e4 LT |
908 | } |
909 | ||
e108b2ca | 910 | if (status & SCxSR_FER(port)) { |
1da177e4 LT |
911 | if (sci_rxd_in(port) == 0) { |
912 | /* Notify of BREAK */ | |
e7c98dc7 | 913 | struct sci_port *sci_port = to_sci_port(port); |
e108b2ca PM |
914 | |
915 | if (!sci_port->break_flag) { | |
d97fbbed PM |
916 | port->icount.brk++; |
917 | ||
e108b2ca PM |
918 | sci_port->break_flag = 1; |
919 | sci_schedule_break_timer(sci_port); | |
920 | ||
1da177e4 | 921 | /* Do sysrq handling. */ |
e108b2ca | 922 | if (uart_handle_break(port)) |
1da177e4 | 923 | return 0; |
762c69e3 PM |
924 | |
925 | dev_dbg(port->dev, "BREAK detected\n"); | |
926 | ||
92a19f9c | 927 | if (tty_insert_flip_char(tport, 0, TTY_BREAK)) |
e7c98dc7 MT |
928 | copied++; |
929 | } | |
930 | ||
e108b2ca | 931 | } else { |
1da177e4 | 932 | /* frame error */ |
d97fbbed PM |
933 | port->icount.frame++; |
934 | ||
92a19f9c | 935 | if (tty_insert_flip_char(tport, 0, TTY_FRAME)) |
33f0f88f | 936 | copied++; |
762c69e3 PM |
937 | |
938 | dev_notice(port->dev, "frame error\n"); | |
1da177e4 LT |
939 | } |
940 | } | |
941 | ||
e108b2ca | 942 | if (status & SCxSR_PER(port)) { |
1da177e4 | 943 | /* parity error */ |
d97fbbed PM |
944 | port->icount.parity++; |
945 | ||
92a19f9c | 946 | if (tty_insert_flip_char(tport, 0, TTY_PARITY)) |
e108b2ca | 947 | copied++; |
762c69e3 | 948 | |
9b971cd2 | 949 | dev_notice(port->dev, "parity error\n"); |
1da177e4 LT |
950 | } |
951 | ||
33f0f88f | 952 | if (copied) |
2e124b4a | 953 | tty_flip_buffer_push(tport); |
1da177e4 LT |
954 | |
955 | return copied; | |
956 | } | |
957 | ||
94c8b6db | 958 | static int sci_handle_fifo_overrun(struct uart_port *port) |
d830fa45 | 959 | { |
92a19f9c | 960 | struct tty_port *tport = &port->state->port; |
debf9507 | 961 | struct sci_port *s = to_sci_port(port); |
d3184e68 | 962 | const struct plat_sci_reg *reg; |
2e0842a1 | 963 | int copied = 0; |
75c249fd | 964 | u16 status; |
d830fa45 | 965 | |
2e0842a1 | 966 | reg = sci_getreg(port, s->overrun_reg); |
4b8c59a3 | 967 | if (!reg->size) |
d830fa45 PM |
968 | return 0; |
969 | ||
2e0842a1 | 970 | status = serial_port_in(port, s->overrun_reg); |
75c249fd GU |
971 | if (status & s->overrun_mask) { |
972 | status &= ~s->overrun_mask; | |
2e0842a1 | 973 | serial_port_out(port, s->overrun_reg, status); |
d830fa45 | 974 | |
d97fbbed PM |
975 | port->icount.overrun++; |
976 | ||
92a19f9c | 977 | tty_insert_flip_char(tport, 0, TTY_OVERRUN); |
2e124b4a | 978 | tty_flip_buffer_push(tport); |
d830fa45 | 979 | |
51b31f1c | 980 | dev_dbg(port->dev, "overrun error\n"); |
d830fa45 PM |
981 | copied++; |
982 | } | |
983 | ||
984 | return copied; | |
985 | } | |
986 | ||
94c8b6db | 987 | static int sci_handle_breaks(struct uart_port *port) |
1da177e4 LT |
988 | { |
989 | int copied = 0; | |
b12bb29f | 990 | unsigned short status = serial_port_in(port, SCxSR); |
92a19f9c | 991 | struct tty_port *tport = &port->state->port; |
a5660ada | 992 | struct sci_port *s = to_sci_port(port); |
1da177e4 | 993 | |
0b3d4ef6 PM |
994 | if (uart_handle_break(port)) |
995 | return 0; | |
996 | ||
b7a76e4b | 997 | if (!s->break_flag && status & SCxSR_BRK(port)) { |
1da177e4 LT |
998 | #if defined(CONFIG_CPU_SH3) |
999 | /* Debounce break */ | |
1000 | s->break_flag = 1; | |
1001 | #endif | |
d97fbbed PM |
1002 | |
1003 | port->icount.brk++; | |
1004 | ||
1da177e4 | 1005 | /* Notify of BREAK */ |
92a19f9c | 1006 | if (tty_insert_flip_char(tport, 0, TTY_BREAK)) |
33f0f88f | 1007 | copied++; |
762c69e3 PM |
1008 | |
1009 | dev_dbg(port->dev, "BREAK detected\n"); | |
1da177e4 LT |
1010 | } |
1011 | ||
33f0f88f | 1012 | if (copied) |
2e124b4a | 1013 | tty_flip_buffer_push(tport); |
e108b2ca | 1014 | |
d830fa45 PM |
1015 | copied += sci_handle_fifo_overrun(port); |
1016 | ||
1da177e4 LT |
1017 | return copied; |
1018 | } | |
1019 | ||
73a19e4c | 1020 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
e1910fcd GU |
1021 | static void sci_dma_tx_complete(void *arg) |
1022 | { | |
1023 | struct sci_port *s = arg; | |
1024 | struct uart_port *port = &s->port; | |
1025 | struct circ_buf *xmit = &port->state->xmit; | |
1026 | unsigned long flags; | |
73a19e4c | 1027 | |
e1910fcd | 1028 | dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); |
73a19e4c | 1029 | |
e1910fcd | 1030 | spin_lock_irqsave(&port->lock, flags); |
73a19e4c | 1031 | |
e1910fcd GU |
1032 | xmit->tail += s->tx_dma_len; |
1033 | xmit->tail &= UART_XMIT_SIZE - 1; | |
73a19e4c | 1034 | |
e1910fcd | 1035 | port->icount.tx += s->tx_dma_len; |
1da177e4 | 1036 | |
e1910fcd GU |
1037 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
1038 | uart_write_wakeup(port); | |
1da177e4 | 1039 | |
e1910fcd GU |
1040 | if (!uart_circ_empty(xmit)) { |
1041 | s->cookie_tx = 0; | |
1042 | schedule_work(&s->work_tx); | |
1043 | } else { | |
1044 | s->cookie_tx = -EINVAL; | |
1045 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { | |
1046 | u16 ctrl = serial_port_in(port, SCSCR); | |
1047 | serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE); | |
1048 | } | |
1049 | } | |
1da177e4 | 1050 | |
fd78a76a | 1051 | spin_unlock_irqrestore(&port->lock, flags); |
1da177e4 LT |
1052 | } |
1053 | ||
e1910fcd GU |
1054 | /* Locking: called with port lock held */ |
1055 | static int sci_dma_rx_push(struct sci_port *s, void *buf, size_t count) | |
1da177e4 | 1056 | { |
e1910fcd GU |
1057 | struct uart_port *port = &s->port; |
1058 | struct tty_port *tport = &port->state->port; | |
1059 | int copied; | |
1da177e4 | 1060 | |
e1910fcd GU |
1061 | copied = tty_insert_flip_string(tport, buf, count); |
1062 | if (copied < count) { | |
1063 | dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n", | |
1064 | count - copied); | |
1065 | port->icount.buf_overrun++; | |
1da177e4 LT |
1066 | } |
1067 | ||
e1910fcd | 1068 | port->icount.rx += copied; |
1da177e4 | 1069 | |
e1910fcd | 1070 | return copied; |
1da177e4 LT |
1071 | } |
1072 | ||
e1910fcd | 1073 | static int sci_dma_rx_find_active(struct sci_port *s) |
1da177e4 | 1074 | { |
e1910fcd | 1075 | unsigned int i; |
1da177e4 | 1076 | |
e1910fcd GU |
1077 | for (i = 0; i < ARRAY_SIZE(s->cookie_rx); i++) |
1078 | if (s->active_rx == s->cookie_rx[i]) | |
1079 | return i; | |
1da177e4 | 1080 | |
e1910fcd GU |
1081 | dev_err(s->port.dev, "%s: Rx cookie %d not found!\n", __func__, |
1082 | s->active_rx); | |
1083 | return -1; | |
1da177e4 LT |
1084 | } |
1085 | ||
e1910fcd | 1086 | static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) |
f43dc23d | 1087 | { |
e1910fcd GU |
1088 | struct dma_chan *chan = s->chan_rx; |
1089 | struct uart_port *port = &s->port; | |
1090 | unsigned long flags; | |
1091 | ||
1092 | spin_lock_irqsave(&port->lock, flags); | |
1093 | s->chan_rx = NULL; | |
1094 | s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; | |
1095 | spin_unlock_irqrestore(&port->lock, flags); | |
1096 | dmaengine_terminate_all(chan); | |
1097 | dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0], | |
1098 | sg_dma_address(&s->sg_rx[0])); | |
1099 | dma_release_channel(chan); | |
1100 | if (enable_pio) | |
1101 | sci_start_rx(port); | |
f43dc23d PM |
1102 | } |
1103 | ||
e1910fcd | 1104 | static void sci_dma_rx_complete(void *arg) |
1da177e4 | 1105 | { |
e1910fcd GU |
1106 | struct sci_port *s = arg; |
1107 | struct uart_port *port = &s->port; | |
67f462b0 | 1108 | struct dma_async_tx_descriptor *desc; |
e1910fcd GU |
1109 | unsigned long flags; |
1110 | int active, count = 0; | |
1da177e4 | 1111 | |
e1910fcd GU |
1112 | dev_dbg(port->dev, "%s(%d) active cookie %d\n", __func__, port->line, |
1113 | s->active_rx); | |
cb772fe7 | 1114 | |
e1910fcd | 1115 | spin_lock_irqsave(&port->lock, flags); |
1da177e4 | 1116 | |
e1910fcd GU |
1117 | active = sci_dma_rx_find_active(s); |
1118 | if (active >= 0) | |
1119 | count = sci_dma_rx_push(s, s->rx_buf[active], s->buf_len_rx); | |
f43dc23d | 1120 | |
e1910fcd | 1121 | mod_timer(&s->rx_timer, jiffies + s->rx_timeout); |
f43dc23d | 1122 | |
e1910fcd GU |
1123 | if (count) |
1124 | tty_flip_buffer_push(&port->state->port); | |
8b6ff84c | 1125 | |
67f462b0 GU |
1126 | desc = dmaengine_prep_slave_sg(s->chan_rx, &s->sg_rx[active], 1, |
1127 | DMA_DEV_TO_MEM, | |
1128 | DMA_PREP_INTERRUPT | DMA_CTRL_ACK); | |
1129 | if (!desc) | |
1130 | goto fail; | |
1131 | ||
1132 | desc->callback = sci_dma_rx_complete; | |
1133 | desc->callback_param = s; | |
1134 | s->cookie_rx[active] = dmaengine_submit(desc); | |
1135 | if (dma_submit_error(s->cookie_rx[active])) | |
1136 | goto fail; | |
1137 | ||
1138 | s->active_rx = s->cookie_rx[!active]; | |
1139 | ||
1140 | dev_dbg(port->dev, "%s: cookie %d #%d, new active cookie %d\n", | |
1141 | __func__, s->cookie_rx[active], active, s->active_rx); | |
1142 | spin_unlock_irqrestore(&port->lock, flags); | |
1143 | return; | |
1144 | ||
1145 | fail: | |
1146 | spin_unlock_irqrestore(&port->lock, flags); | |
1147 | dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n"); | |
1148 | sci_rx_dma_release(s, true); | |
1da177e4 LT |
1149 | } |
1150 | ||
e1910fcd | 1151 | static void sci_tx_dma_release(struct sci_port *s, bool enable_pio) |
1da177e4 | 1152 | { |
e1910fcd GU |
1153 | struct dma_chan *chan = s->chan_tx; |
1154 | struct uart_port *port = &s->port; | |
e552de24 | 1155 | unsigned long flags; |
1da177e4 | 1156 | |
e1910fcd GU |
1157 | spin_lock_irqsave(&port->lock, flags); |
1158 | s->chan_tx = NULL; | |
1159 | s->cookie_tx = -EINVAL; | |
1160 | spin_unlock_irqrestore(&port->lock, flags); | |
1161 | dmaengine_terminate_all(chan); | |
1162 | dma_unmap_single(chan->device->dev, s->tx_dma_addr, UART_XMIT_SIZE, | |
1163 | DMA_TO_DEVICE); | |
1164 | dma_release_channel(chan); | |
1165 | if (enable_pio) | |
1166 | sci_start_tx(port); | |
1167 | } | |
d535a230 | 1168 | |
e1910fcd GU |
1169 | static void sci_submit_rx(struct sci_port *s) |
1170 | { | |
1171 | struct dma_chan *chan = s->chan_rx; | |
1172 | int i; | |
073e84c9 | 1173 | |
e1910fcd GU |
1174 | for (i = 0; i < 2; i++) { |
1175 | struct scatterlist *sg = &s->sg_rx[i]; | |
1176 | struct dma_async_tx_descriptor *desc; | |
1da177e4 | 1177 | |
e1910fcd GU |
1178 | desc = dmaengine_prep_slave_sg(chan, |
1179 | sg, 1, DMA_DEV_TO_MEM, | |
1180 | DMA_PREP_INTERRUPT | DMA_CTRL_ACK); | |
1181 | if (!desc) | |
1182 | goto fail; | |
501b825d | 1183 | |
e1910fcd GU |
1184 | desc->callback = sci_dma_rx_complete; |
1185 | desc->callback_param = s; | |
1186 | s->cookie_rx[i] = dmaengine_submit(desc); | |
1187 | if (dma_submit_error(s->cookie_rx[i])) | |
1188 | goto fail; | |
9174fc8f | 1189 | |
e1910fcd GU |
1190 | dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__, |
1191 | s->cookie_rx[i], i); | |
1192 | } | |
9174fc8f | 1193 | |
e1910fcd | 1194 | s->active_rx = s->cookie_rx[0]; |
9174fc8f | 1195 | |
e1910fcd GU |
1196 | dma_async_issue_pending(chan); |
1197 | return; | |
9174fc8f | 1198 | |
e1910fcd GU |
1199 | fail: |
1200 | if (i) | |
1201 | dmaengine_terminate_all(chan); | |
1202 | for (i = 0; i < 2; i++) | |
1203 | s->cookie_rx[i] = -EINVAL; | |
1204 | s->active_rx = -EINVAL; | |
1205 | dev_warn(s->port.dev, "Failed to re-start Rx DMA, using PIO\n"); | |
1206 | sci_rx_dma_release(s, true); | |
1207 | } | |
9174fc8f | 1208 | |
e1910fcd | 1209 | static void work_fn_tx(struct work_struct *work) |
1da177e4 | 1210 | { |
e1910fcd GU |
1211 | struct sci_port *s = container_of(work, struct sci_port, work_tx); |
1212 | struct dma_async_tx_descriptor *desc; | |
1213 | struct dma_chan *chan = s->chan_tx; | |
1214 | struct uart_port *port = &s->port; | |
1215 | struct circ_buf *xmit = &port->state->xmit; | |
1216 | dma_addr_t buf; | |
1da177e4 | 1217 | |
9174fc8f | 1218 | /* |
e1910fcd GU |
1219 | * DMA is idle now. |
1220 | * Port xmit buffer is already mapped, and it is one page... Just adjust | |
1221 | * offsets and lengths. Since it is a circular buffer, we have to | |
1222 | * transmit till the end, and then the rest. Take the port lock to get a | |
1223 | * consistent xmit buffer state. | |
9174fc8f | 1224 | */ |
e1910fcd GU |
1225 | spin_lock_irq(&port->lock); |
1226 | buf = s->tx_dma_addr + (xmit->tail & (UART_XMIT_SIZE - 1)); | |
1227 | s->tx_dma_len = min_t(unsigned int, | |
1228 | CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), | |
1229 | CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); | |
1230 | spin_unlock_irq(&port->lock); | |
0e8963de | 1231 | |
e1910fcd GU |
1232 | desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len, |
1233 | DMA_MEM_TO_DEV, | |
1234 | DMA_PREP_INTERRUPT | DMA_CTRL_ACK); | |
1235 | if (!desc) { | |
1236 | dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n"); | |
1237 | /* switch to PIO */ | |
1238 | sci_tx_dma_release(s, true); | |
1239 | return; | |
1240 | } | |
0e8963de | 1241 | |
e1910fcd GU |
1242 | dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len, |
1243 | DMA_TO_DEVICE); | |
1da177e4 | 1244 | |
e1910fcd GU |
1245 | spin_lock_irq(&port->lock); |
1246 | desc->callback = sci_dma_tx_complete; | |
1247 | desc->callback_param = s; | |
1248 | spin_unlock_irq(&port->lock); | |
1249 | s->cookie_tx = dmaengine_submit(desc); | |
1250 | if (dma_submit_error(s->cookie_tx)) { | |
1251 | dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); | |
1252 | /* switch to PIO */ | |
1253 | sci_tx_dma_release(s, true); | |
1254 | return; | |
1da177e4 | 1255 | } |
1da177e4 | 1256 | |
e1910fcd GU |
1257 | dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", |
1258 | __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx); | |
73a19e4c | 1259 | |
e1910fcd | 1260 | dma_async_issue_pending(chan); |
1da177e4 LT |
1261 | } |
1262 | ||
e1910fcd | 1263 | static bool filter(struct dma_chan *chan, void *slave) |
1da177e4 | 1264 | { |
e1910fcd | 1265 | struct sh_dmae_slave *param = slave; |
dc7e3ef7 | 1266 | |
e1910fcd GU |
1267 | dev_dbg(chan->device->dev, "%s: slave ID %d\n", |
1268 | __func__, param->shdma_slave.slave_id); | |
1269 | ||
1270 | chan->private = ¶m->shdma_slave; | |
1271 | return true; | |
1da177e4 LT |
1272 | } |
1273 | ||
e1910fcd | 1274 | static void rx_timer_fn(unsigned long arg) |
1da177e4 | 1275 | { |
e1910fcd GU |
1276 | struct sci_port *s = (struct sci_port *)arg; |
1277 | struct uart_port *port = &s->port; | |
67f462b0 GU |
1278 | struct dma_tx_state state; |
1279 | enum dma_status status; | |
1280 | unsigned long flags; | |
1281 | unsigned int read; | |
1282 | int active, count; | |
1283 | u16 scr; | |
1284 | ||
1285 | spin_lock_irqsave(&port->lock, flags); | |
e1910fcd | 1286 | |
67f462b0 GU |
1287 | dev_dbg(port->dev, "DMA Rx timed out\n"); |
1288 | scr = serial_port_in(port, SCSCR); | |
e1910fcd GU |
1289 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { |
1290 | scr &= ~SCSCR_RDRQE; | |
1291 | enable_irq(s->irqs[SCIx_RXI_IRQ]); | |
1292 | } | |
1293 | serial_port_out(port, SCSCR, scr | SCSCR_RIE); | |
67f462b0 GU |
1294 | |
1295 | active = sci_dma_rx_find_active(s); | |
1296 | if (active < 0) { | |
1297 | spin_unlock_irqrestore(&port->lock, flags); | |
1298 | return; | |
1299 | } | |
1300 | ||
1301 | status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state); | |
1302 | if (status == DMA_COMPLETE) | |
1303 | dev_dbg(port->dev, "Cookie %d #%d has already completed\n", | |
1304 | s->active_rx, active); | |
1305 | ||
1306 | /* Handle incomplete DMA receive */ | |
1307 | dmaengine_terminate_all(s->chan_rx); | |
1308 | read = sg_dma_len(&s->sg_rx[active]) - state.residue; | |
1309 | dev_dbg(port->dev, "Read %u bytes with cookie %d\n", read, | |
1310 | s->active_rx); | |
1311 | ||
1312 | if (read) { | |
1313 | count = sci_dma_rx_push(s, s->rx_buf[active], read); | |
1314 | if (count) | |
1315 | tty_flip_buffer_push(&port->state->port); | |
1316 | } | |
1317 | ||
1318 | spin_unlock_irqrestore(&port->lock, flags); | |
1319 | ||
756981be GU |
1320 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) |
1321 | sci_submit_rx(s); | |
1da177e4 LT |
1322 | } |
1323 | ||
e1910fcd | 1324 | static void sci_request_dma(struct uart_port *port) |
73a19e4c | 1325 | { |
e1910fcd GU |
1326 | struct sci_port *s = to_sci_port(port); |
1327 | struct sh_dmae_slave *param; | |
1328 | struct dma_chan *chan; | |
1329 | dma_cap_mask_t mask; | |
73a19e4c | 1330 | |
e1910fcd | 1331 | dev_dbg(port->dev, "%s: port %d\n", __func__, port->line); |
73a19e4c | 1332 | |
e1910fcd GU |
1333 | if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0) |
1334 | return; | |
73a19e4c | 1335 | |
e1910fcd GU |
1336 | dma_cap_zero(mask); |
1337 | dma_cap_set(DMA_SLAVE, mask); | |
73a19e4c | 1338 | |
e1910fcd | 1339 | param = &s->param_tx; |
73a19e4c | 1340 | |
e1910fcd GU |
1341 | /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */ |
1342 | param->shdma_slave.slave_id = s->cfg->dma_slave_tx; | |
73a19e4c | 1343 | |
e1910fcd GU |
1344 | s->cookie_tx = -EINVAL; |
1345 | chan = dma_request_channel(mask, filter, param); | |
1346 | dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan); | |
1347 | if (chan) { | |
1348 | s->chan_tx = chan; | |
1349 | /* UART circular tx buffer is an aligned page. */ | |
1350 | s->tx_dma_addr = dma_map_single(chan->device->dev, | |
1351 | port->state->xmit.buf, | |
1352 | UART_XMIT_SIZE, | |
1353 | DMA_TO_DEVICE); | |
1354 | if (dma_mapping_error(chan->device->dev, s->tx_dma_addr)) { | |
1355 | dev_warn(port->dev, "Failed mapping Tx DMA descriptor\n"); | |
1356 | dma_release_channel(chan); | |
1357 | s->chan_tx = NULL; | |
1358 | } else { | |
1359 | dev_dbg(port->dev, "%s: mapped %lu@%p to %pad\n", | |
1360 | __func__, UART_XMIT_SIZE, | |
1361 | port->state->xmit.buf, &s->tx_dma_addr); | |
49d4bcad | 1362 | } |
e1910fcd GU |
1363 | |
1364 | INIT_WORK(&s->work_tx, work_fn_tx); | |
3089f381 GL |
1365 | } |
1366 | ||
e1910fcd | 1367 | param = &s->param_rx; |
73a19e4c | 1368 | |
e1910fcd GU |
1369 | /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */ |
1370 | param->shdma_slave.slave_id = s->cfg->dma_slave_rx; | |
73a19e4c | 1371 | |
e1910fcd GU |
1372 | chan = dma_request_channel(mask, filter, param); |
1373 | dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); | |
1374 | if (chan) { | |
1375 | unsigned int i; | |
1376 | dma_addr_t dma; | |
1377 | void *buf; | |
73a19e4c | 1378 | |
e1910fcd | 1379 | s->chan_rx = chan; |
73a19e4c | 1380 | |
e1910fcd GU |
1381 | s->buf_len_rx = 2 * max_t(size_t, 16, port->fifosize); |
1382 | buf = dma_alloc_coherent(chan->device->dev, s->buf_len_rx * 2, | |
1383 | &dma, GFP_KERNEL); | |
1384 | if (!buf) { | |
1385 | dev_warn(port->dev, | |
1386 | "Failed to allocate Rx dma buffer, using PIO\n"); | |
1387 | dma_release_channel(chan); | |
1388 | s->chan_rx = NULL; | |
1389 | sci_start_rx(port); | |
1390 | return; | |
1391 | } | |
73a19e4c | 1392 | |
e1910fcd GU |
1393 | for (i = 0; i < 2; i++) { |
1394 | struct scatterlist *sg = &s->sg_rx[i]; | |
0533502d | 1395 | |
e1910fcd GU |
1396 | sg_init_table(sg, 1); |
1397 | s->rx_buf[i] = buf; | |
1398 | sg_dma_address(sg) = dma; | |
1399 | sg->length = s->buf_len_rx; | |
0533502d | 1400 | |
e1910fcd GU |
1401 | buf += s->buf_len_rx; |
1402 | dma += s->buf_len_rx; | |
1403 | } | |
1404 | ||
e1910fcd GU |
1405 | setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s); |
1406 | ||
756981be GU |
1407 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) |
1408 | sci_submit_rx(s); | |
e1910fcd | 1409 | } |
0533502d GU |
1410 | } |
1411 | ||
e1910fcd | 1412 | static void sci_free_dma(struct uart_port *port) |
73a19e4c | 1413 | { |
e1910fcd | 1414 | struct sci_port *s = to_sci_port(port); |
73a19e4c | 1415 | |
e1910fcd GU |
1416 | if (s->chan_tx) |
1417 | sci_tx_dma_release(s, false); | |
1418 | if (s->chan_rx) | |
1419 | sci_rx_dma_release(s, false); | |
1420 | } | |
1421 | #else | |
1422 | static inline void sci_request_dma(struct uart_port *port) | |
1423 | { | |
1424 | } | |
73a19e4c | 1425 | |
e1910fcd GU |
1426 | static inline void sci_free_dma(struct uart_port *port) |
1427 | { | |
1428 | } | |
1429 | #endif | |
73a19e4c | 1430 | |
e1910fcd GU |
1431 | static irqreturn_t sci_rx_interrupt(int irq, void *ptr) |
1432 | { | |
1433 | #ifdef CONFIG_SERIAL_SH_SCI_DMA | |
1434 | struct uart_port *port = ptr; | |
1435 | struct sci_port *s = to_sci_port(port); | |
73a19e4c | 1436 | |
e1910fcd GU |
1437 | if (s->chan_rx) { |
1438 | u16 scr = serial_port_in(port, SCSCR); | |
1439 | u16 ssr = serial_port_in(port, SCxSR); | |
73a19e4c | 1440 | |
e1910fcd GU |
1441 | /* Disable future Rx interrupts */ |
1442 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { | |
1443 | disable_irq_nosync(irq); | |
1444 | scr |= SCSCR_RDRQE; | |
1445 | } else { | |
1446 | scr &= ~SCSCR_RIE; | |
756981be | 1447 | sci_submit_rx(s); |
e1910fcd GU |
1448 | } |
1449 | serial_port_out(port, SCSCR, scr); | |
1450 | /* Clear current interrupt */ | |
1451 | serial_port_out(port, SCxSR, | |
1452 | ssr & ~(SCIF_DR | SCxSR_RDxF(port))); | |
1453 | dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n", | |
1454 | jiffies, s->rx_timeout); | |
1455 | mod_timer(&s->rx_timer, jiffies + s->rx_timeout); | |
73a19e4c | 1456 | |
e1910fcd GU |
1457 | return IRQ_HANDLED; |
1458 | } | |
1459 | #endif | |
73a19e4c | 1460 | |
e1910fcd GU |
1461 | /* I think sci_receive_chars has to be called irrespective |
1462 | * of whether the I_IXOFF is set, otherwise, how is the interrupt | |
1463 | * to be disabled? | |
1464 | */ | |
1465 | sci_receive_chars(ptr); | |
1466 | ||
1467 | return IRQ_HANDLED; | |
73a19e4c GL |
1468 | } |
1469 | ||
e1910fcd | 1470 | static irqreturn_t sci_tx_interrupt(int irq, void *ptr) |
73a19e4c | 1471 | { |
e1910fcd | 1472 | struct uart_port *port = ptr; |
04928b79 | 1473 | unsigned long flags; |
73a19e4c | 1474 | |
04928b79 | 1475 | spin_lock_irqsave(&port->lock, flags); |
e1910fcd | 1476 | sci_transmit_chars(port); |
04928b79 | 1477 | spin_unlock_irqrestore(&port->lock, flags); |
e1910fcd GU |
1478 | |
1479 | return IRQ_HANDLED; | |
73a19e4c GL |
1480 | } |
1481 | ||
e1910fcd | 1482 | static irqreturn_t sci_er_interrupt(int irq, void *ptr) |
73a19e4c | 1483 | { |
e1910fcd GU |
1484 | struct uart_port *port = ptr; |
1485 | struct sci_port *s = to_sci_port(port); | |
73a19e4c | 1486 | |
e1910fcd GU |
1487 | /* Handle errors */ |
1488 | if (port->type == PORT_SCI) { | |
1489 | if (sci_handle_errors(port)) { | |
1490 | /* discard character in rx buffer */ | |
1491 | serial_port_in(port, SCxSR); | |
1492 | sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); | |
1493 | } | |
1494 | } else { | |
1495 | sci_handle_fifo_overrun(port); | |
1496 | if (!s->chan_rx) | |
1497 | sci_receive_chars(ptr); | |
1498 | } | |
1499 | ||
1500 | sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port)); | |
1501 | ||
1502 | /* Kick the transmission */ | |
1503 | if (!s->chan_tx) | |
1504 | sci_tx_interrupt(irq, ptr); | |
1505 | ||
1506 | return IRQ_HANDLED; | |
73a19e4c GL |
1507 | } |
1508 | ||
e1910fcd | 1509 | static irqreturn_t sci_br_interrupt(int irq, void *ptr) |
73a19e4c | 1510 | { |
e1910fcd | 1511 | struct uart_port *port = ptr; |
73a19e4c | 1512 | |
e1910fcd GU |
1513 | /* Handle BREAKs */ |
1514 | sci_handle_breaks(port); | |
1515 | sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port)); | |
73a19e4c | 1516 | |
e1910fcd GU |
1517 | return IRQ_HANDLED; |
1518 | } | |
73a19e4c | 1519 | |
e1910fcd GU |
1520 | static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) |
1521 | { | |
1522 | unsigned short ssr_status, scr_status, err_enabled, orer_status = 0; | |
1523 | struct uart_port *port = ptr; | |
1524 | struct sci_port *s = to_sci_port(port); | |
1525 | irqreturn_t ret = IRQ_NONE; | |
73a19e4c | 1526 | |
e1910fcd GU |
1527 | ssr_status = serial_port_in(port, SCxSR); |
1528 | scr_status = serial_port_in(port, SCSCR); | |
1529 | if (s->overrun_reg == SCxSR) | |
1530 | orer_status = ssr_status; | |
1531 | else { | |
1532 | if (sci_getreg(port, s->overrun_reg)->size) | |
1533 | orer_status = serial_port_in(port, s->overrun_reg); | |
73a19e4c GL |
1534 | } |
1535 | ||
e1910fcd | 1536 | err_enabled = scr_status & port_rx_irq_mask(port); |
73a19e4c | 1537 | |
e1910fcd GU |
1538 | /* Tx Interrupt */ |
1539 | if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) && | |
1540 | !s->chan_tx) | |
1541 | ret = sci_tx_interrupt(irq, ptr); | |
658daa95 | 1542 | |
e1910fcd GU |
1543 | /* |
1544 | * Rx Interrupt: if we're using DMA, the DMA controller clears RDF / | |
1545 | * DR flags | |
1546 | */ | |
1547 | if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) && | |
1548 | (scr_status & SCSCR_RIE)) | |
1549 | ret = sci_rx_interrupt(irq, ptr); | |
73a19e4c | 1550 | |
e1910fcd GU |
1551 | /* Error Interrupt */ |
1552 | if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) | |
1553 | ret = sci_er_interrupt(irq, ptr); | |
73a19e4c | 1554 | |
e1910fcd GU |
1555 | /* Break Interrupt */ |
1556 | if ((ssr_status & SCxSR_BRK(port)) && err_enabled) | |
1557 | ret = sci_br_interrupt(irq, ptr); | |
1558 | ||
1559 | /* Overrun Interrupt */ | |
1560 | if (orer_status & s->overrun_mask) { | |
1561 | sci_handle_fifo_overrun(port); | |
1562 | ret = IRQ_HANDLED; | |
73a19e4c | 1563 | } |
73a19e4c | 1564 | |
e1910fcd GU |
1565 | return ret; |
1566 | } | |
73a19e4c | 1567 | |
e1910fcd GU |
1568 | /* |
1569 | * Here we define a transition notifier so that we can update all of our | |
1570 | * ports' baud rate when the peripheral clock changes. | |
1571 | */ | |
1572 | static int sci_notifier(struct notifier_block *self, | |
1573 | unsigned long phase, void *p) | |
1574 | { | |
1575 | struct sci_port *sci_port; | |
1576 | unsigned long flags; | |
73a19e4c | 1577 | |
e1910fcd | 1578 | sci_port = container_of(self, struct sci_port, freq_transition); |
73a19e4c | 1579 | |
e1910fcd GU |
1580 | if (phase == CPUFREQ_POSTCHANGE) { |
1581 | struct uart_port *port = &sci_port->port; | |
73a19e4c | 1582 | |
e1910fcd GU |
1583 | spin_lock_irqsave(&port->lock, flags); |
1584 | port->uartclk = clk_get_rate(sci_port->iclk); | |
1585 | spin_unlock_irqrestore(&port->lock, flags); | |
73a19e4c GL |
1586 | } |
1587 | ||
e1910fcd GU |
1588 | return NOTIFY_OK; |
1589 | } | |
73a19e4c | 1590 | |
e1910fcd GU |
1591 | static const struct sci_irq_desc { |
1592 | const char *desc; | |
1593 | irq_handler_t handler; | |
1594 | } sci_irq_desc[] = { | |
1595 | /* | |
1596 | * Split out handlers, the default case. | |
1597 | */ | |
1598 | [SCIx_ERI_IRQ] = { | |
1599 | .desc = "rx err", | |
1600 | .handler = sci_er_interrupt, | |
1601 | }, | |
3089f381 | 1602 | |
e1910fcd GU |
1603 | [SCIx_RXI_IRQ] = { |
1604 | .desc = "rx full", | |
1605 | .handler = sci_rx_interrupt, | |
1606 | }, | |
47aceb92 | 1607 | |
e1910fcd GU |
1608 | [SCIx_TXI_IRQ] = { |
1609 | .desc = "tx empty", | |
1610 | .handler = sci_tx_interrupt, | |
1611 | }, | |
73a19e4c | 1612 | |
e1910fcd GU |
1613 | [SCIx_BRI_IRQ] = { |
1614 | .desc = "break", | |
1615 | .handler = sci_br_interrupt, | |
1616 | }, | |
73a19e4c GL |
1617 | |
1618 | /* | |
e1910fcd | 1619 | * Special muxed handler. |
73a19e4c | 1620 | */ |
e1910fcd GU |
1621 | [SCIx_MUX_IRQ] = { |
1622 | .desc = "mux", | |
1623 | .handler = sci_mpxed_interrupt, | |
1624 | }, | |
1625 | }; | |
73a19e4c | 1626 | |
e1910fcd GU |
1627 | static int sci_request_irq(struct sci_port *port) |
1628 | { | |
1629 | struct uart_port *up = &port->port; | |
1630 | int i, j, ret = 0; | |
73a19e4c | 1631 | |
e1910fcd GU |
1632 | for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) { |
1633 | const struct sci_irq_desc *desc; | |
1634 | int irq; | |
73a19e4c | 1635 | |
e1910fcd GU |
1636 | if (SCIx_IRQ_IS_MUXED(port)) { |
1637 | i = SCIx_MUX_IRQ; | |
1638 | irq = up->irq; | |
1639 | } else { | |
1640 | irq = port->irqs[i]; | |
1641 | ||
1642 | /* | |
1643 | * Certain port types won't support all of the | |
1644 | * available interrupt sources. | |
1645 | */ | |
1646 | if (unlikely(irq < 0)) | |
1647 | continue; | |
1648 | } | |
1649 | ||
1650 | desc = sci_irq_desc + i; | |
1651 | port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s", | |
1652 | dev_name(up->dev), desc->desc); | |
1653 | if (!port->irqstr[j]) | |
1654 | goto out_nomem; | |
1655 | ||
1656 | ret = request_irq(irq, desc->handler, up->irqflags, | |
1657 | port->irqstr[j], port); | |
1658 | if (unlikely(ret)) { | |
1659 | dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc); | |
1660 | goto out_noirq; | |
1661 | } | |
73a19e4c GL |
1662 | } |
1663 | ||
e1910fcd | 1664 | return 0; |
1da177e4 | 1665 | |
e1910fcd GU |
1666 | out_noirq: |
1667 | while (--i >= 0) | |
1668 | free_irq(port->irqs[i], port); | |
f43dc23d | 1669 | |
e1910fcd GU |
1670 | out_nomem: |
1671 | while (--j >= 0) | |
1672 | kfree(port->irqstr[j]); | |
f43dc23d | 1673 | |
e1910fcd | 1674 | return ret; |
1da177e4 LT |
1675 | } |
1676 | ||
e1910fcd | 1677 | static void sci_free_irq(struct sci_port *port) |
1da177e4 | 1678 | { |
e1910fcd | 1679 | int i; |
1da177e4 | 1680 | |
e1910fcd GU |
1681 | /* |
1682 | * Intentionally in reverse order so we iterate over the muxed | |
1683 | * IRQ first. | |
1684 | */ | |
1685 | for (i = 0; i < SCIx_NR_IRQS; i++) { | |
1686 | int irq = port->irqs[i]; | |
f43dc23d | 1687 | |
e1910fcd GU |
1688 | /* |
1689 | * Certain port types won't support all of the available | |
1690 | * interrupt sources. | |
1691 | */ | |
1692 | if (unlikely(irq < 0)) | |
1693 | continue; | |
f43dc23d | 1694 | |
e1910fcd GU |
1695 | free_irq(port->irqs[i], port); |
1696 | kfree(port->irqstr[i]); | |
f43dc23d | 1697 | |
e1910fcd GU |
1698 | if (SCIx_IRQ_IS_MUXED(port)) { |
1699 | /* If there's only one IRQ, we're done. */ | |
1700 | return; | |
1701 | } | |
1702 | } | |
1da177e4 LT |
1703 | } |
1704 | ||
e1910fcd | 1705 | static unsigned int sci_tx_empty(struct uart_port *port) |
1da177e4 | 1706 | { |
e1910fcd GU |
1707 | unsigned short status = serial_port_in(port, SCxSR); |
1708 | unsigned short in_tx_fifo = sci_txfill(port); | |
f43dc23d | 1709 | |
e1910fcd | 1710 | return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; |
1da177e4 LT |
1711 | } |
1712 | ||
e1910fcd GU |
1713 | /* |
1714 | * Modem control is a bit of a mixed bag for SCI(F) ports. Generally | |
1715 | * CTS/RTS is supported in hardware by at least one port and controlled | |
1716 | * via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently | |
1717 | * handled via the ->init_pins() op, which is a bit of a one-way street, | |
1718 | * lacking any ability to defer pin control -- this will later be | |
1719 | * converted over to the GPIO framework). | |
1720 | * | |
1721 | * Other modes (such as loopback) are supported generically on certain | |
1722 | * port types, but not others. For these it's sufficient to test for the | |
1723 | * existence of the support register and simply ignore the port type. | |
1724 | */ | |
1725 | static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
1da177e4 | 1726 | { |
e1910fcd GU |
1727 | if (mctrl & TIOCM_LOOP) { |
1728 | const struct plat_sci_reg *reg; | |
f43dc23d | 1729 | |
e1910fcd GU |
1730 | /* |
1731 | * Standard loopback mode for SCFCR ports. | |
1732 | */ | |
1733 | reg = sci_getreg(port, SCFCR); | |
1734 | if (reg->size) | |
1735 | serial_port_out(port, SCFCR, | |
1736 | serial_port_in(port, SCFCR) | | |
1737 | SCFCR_LOOP); | |
1738 | } | |
1739 | } | |
f43dc23d | 1740 | |
e1910fcd GU |
1741 | static unsigned int sci_get_mctrl(struct uart_port *port) |
1742 | { | |
1743 | /* | |
1744 | * CTS/RTS is handled in hardware when supported, while nothing | |
1745 | * else is wired up. Keep it simple and simply assert DSR/CAR. | |
1746 | */ | |
1747 | return TIOCM_DSR | TIOCM_CAR; | |
1da177e4 LT |
1748 | } |
1749 | ||
1da177e4 LT |
1750 | static void sci_break_ctl(struct uart_port *port, int break_state) |
1751 | { | |
bbb4ce50 | 1752 | struct sci_port *s = to_sci_port(port); |
d3184e68 | 1753 | const struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; |
bbb4ce50 SY |
1754 | unsigned short scscr, scsptr; |
1755 | ||
a4e02f6d SY |
1756 | /* check wheter the port has SCSPTR */ |
1757 | if (!reg->size) { | |
bbb4ce50 SY |
1758 | /* |
1759 | * Not supported by hardware. Most parts couple break and rx | |
1760 | * interrupts together, with break detection always enabled. | |
1761 | */ | |
a4e02f6d | 1762 | return; |
bbb4ce50 | 1763 | } |
a4e02f6d SY |
1764 | |
1765 | scsptr = serial_port_in(port, SCSPTR); | |
1766 | scscr = serial_port_in(port, SCSCR); | |
1767 | ||
1768 | if (break_state == -1) { | |
1769 | scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT; | |
1770 | scscr &= ~SCSCR_TE; | |
1771 | } else { | |
1772 | scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO; | |
1773 | scscr |= SCSCR_TE; | |
1774 | } | |
1775 | ||
1776 | serial_port_out(port, SCSPTR, scsptr); | |
1777 | serial_port_out(port, SCSCR, scscr); | |
1da177e4 LT |
1778 | } |
1779 | ||
1780 | static int sci_startup(struct uart_port *port) | |
1781 | { | |
a5660ada | 1782 | struct sci_port *s = to_sci_port(port); |
33b48e16 | 1783 | unsigned long flags; |
073e84c9 | 1784 | int ret; |
1da177e4 | 1785 | |
73a19e4c GL |
1786 | dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); |
1787 | ||
073e84c9 PM |
1788 | ret = sci_request_irq(s); |
1789 | if (unlikely(ret < 0)) | |
1790 | return ret; | |
1791 | ||
73a19e4c | 1792 | sci_request_dma(port); |
073e84c9 | 1793 | |
33b48e16 | 1794 | spin_lock_irqsave(&port->lock, flags); |
d656901b | 1795 | sci_start_tx(port); |
73a19e4c | 1796 | sci_start_rx(port); |
33b48e16 | 1797 | spin_unlock_irqrestore(&port->lock, flags); |
1da177e4 LT |
1798 | |
1799 | return 0; | |
1800 | } | |
1801 | ||
1802 | static void sci_shutdown(struct uart_port *port) | |
1803 | { | |
a5660ada | 1804 | struct sci_port *s = to_sci_port(port); |
33b48e16 | 1805 | unsigned long flags; |
1da177e4 | 1806 | |
73a19e4c GL |
1807 | dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); |
1808 | ||
33b48e16 | 1809 | spin_lock_irqsave(&port->lock, flags); |
1da177e4 | 1810 | sci_stop_rx(port); |
b129a8cc | 1811 | sci_stop_tx(port); |
33b48e16 | 1812 | spin_unlock_irqrestore(&port->lock, flags); |
073e84c9 | 1813 | |
73a19e4c | 1814 | sci_free_dma(port); |
1da177e4 | 1815 | sci_free_irq(s); |
1da177e4 LT |
1816 | } |
1817 | ||
ec09c5eb | 1818 | static unsigned int sci_scbrr_calc(struct sci_port *s, unsigned int bps, |
26c92f37 PM |
1819 | unsigned long freq) |
1820 | { | |
ec09c5eb LP |
1821 | if (s->sampling_rate) |
1822 | return DIV_ROUND_CLOSEST(freq, s->sampling_rate * bps) - 1; | |
1823 | ||
26c92f37 PM |
1824 | /* Warn, but use a safe default */ |
1825 | WARN_ON(1); | |
e8183a6c | 1826 | |
26c92f37 PM |
1827 | return ((freq + 16 * bps) / (32 * bps) - 1); |
1828 | } | |
1829 | ||
730c4e78 NI |
1830 | /* calculate frame length from SMR */ |
1831 | static int sci_baud_calc_frame_len(unsigned int smr_val) | |
1832 | { | |
1833 | int len = 10; | |
1834 | ||
1835 | if (smr_val & SCSMR_CHR) | |
1836 | len--; | |
1837 | if (smr_val & SCSMR_PE) | |
1838 | len++; | |
1839 | if (smr_val & SCSMR_STOP) | |
1840 | len++; | |
1841 | ||
1842 | return len; | |
1843 | } | |
1844 | ||
1845 | ||
f303b364 UH |
1846 | /* calculate sample rate, BRR, and clock select for HSCIF */ |
1847 | static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq, | |
1848 | int *brr, unsigned int *srr, | |
730c4e78 | 1849 | unsigned int *cks, int frame_len) |
f303b364 | 1850 | { |
730c4e78 | 1851 | int sr, c, br, err, recv_margin; |
f303b364 | 1852 | int min_err = 1000; /* 100% */ |
730c4e78 | 1853 | int recv_max_margin = 0; |
f303b364 UH |
1854 | |
1855 | /* Find the combination of sample rate and clock select with the | |
1856 | smallest deviation from the desired baud rate. */ | |
1857 | for (sr = 8; sr <= 32; sr++) { | |
1858 | for (c = 0; c <= 3; c++) { | |
1859 | /* integerized formulas from HSCIF documentation */ | |
b7d66397 NI |
1860 | br = DIV_ROUND_CLOSEST(freq, (sr * |
1861 | (1 << (2 * c + 1)) * bps)) - 1; | |
bcb9973a | 1862 | br = clamp(br, 0, 255); |
b7d66397 NI |
1863 | err = DIV_ROUND_CLOSEST(freq, ((br + 1) * bps * sr * |
1864 | (1 << (2 * c + 1)) / 1000)) - | |
1865 | 1000; | |
730c4e78 NI |
1866 | /* Calc recv margin |
1867 | * M: Receive margin (%) | |
1868 | * N: Ratio of bit rate to clock (N = sampling rate) | |
1869 | * D: Clock duty (D = 0 to 1.0) | |
1870 | * L: Frame length (L = 9 to 12) | |
1871 | * F: Absolute value of clock frequency deviation | |
1872 | * | |
1873 | * M = |(0.5 - 1 / 2 * N) - ((L - 0.5) * F) - | |
1874 | * (|D - 0.5| / N * (1 + F))| | |
1875 | * NOTE: Usually, treat D for 0.5, F is 0 by this | |
1876 | * calculation. | |
1877 | */ | |
1878 | recv_margin = abs((500 - | |
1879 | DIV_ROUND_CLOSEST(1000, sr << 1)) / 10); | |
f53297fb | 1880 | if (abs(min_err) > abs(err)) { |
f303b364 | 1881 | min_err = err; |
730c4e78 NI |
1882 | recv_max_margin = recv_margin; |
1883 | } else if ((min_err == err) && | |
1884 | (recv_margin > recv_max_margin)) | |
1885 | recv_max_margin = recv_margin; | |
1886 | else | |
1887 | continue; | |
1888 | ||
1889 | *brr = br; | |
1890 | *srr = sr - 1; | |
1891 | *cks = c; | |
f303b364 UH |
1892 | } |
1893 | } | |
1894 | ||
1895 | if (min_err == 1000) { | |
1896 | WARN_ON(1); | |
1897 | /* use defaults */ | |
1898 | *brr = 255; | |
1899 | *srr = 15; | |
1900 | *cks = 0; | |
1901 | } | |
1902 | } | |
1903 | ||
1ba76220 MD |
1904 | static void sci_reset(struct uart_port *port) |
1905 | { | |
d3184e68 | 1906 | const struct plat_sci_reg *reg; |
1ba76220 MD |
1907 | unsigned int status; |
1908 | ||
1909 | do { | |
b12bb29f | 1910 | status = serial_port_in(port, SCxSR); |
1ba76220 MD |
1911 | } while (!(status & SCxSR_TEND(port))); |
1912 | ||
b12bb29f | 1913 | serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ |
1ba76220 | 1914 | |
0979e0e6 PM |
1915 | reg = sci_getreg(port, SCFCR); |
1916 | if (reg->size) | |
b12bb29f | 1917 | serial_port_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); |
1ba76220 MD |
1918 | } |
1919 | ||
606d099c AC |
1920 | static void sci_set_termios(struct uart_port *port, struct ktermios *termios, |
1921 | struct ktermios *old) | |
1da177e4 | 1922 | { |
00b9de9c | 1923 | struct sci_port *s = to_sci_port(port); |
d3184e68 | 1924 | const struct plat_sci_reg *reg; |
730c4e78 | 1925 | unsigned int baud, smr_val = 0, max_baud, cks = 0; |
a2159b52 | 1926 | int t = -1; |
d4759ded | 1927 | unsigned int srr = 15; |
1da177e4 | 1928 | |
730c4e78 NI |
1929 | if ((termios->c_cflag & CSIZE) == CS7) |
1930 | smr_val |= SCSMR_CHR; | |
1931 | if (termios->c_cflag & PARENB) | |
1932 | smr_val |= SCSMR_PE; | |
1933 | if (termios->c_cflag & PARODD) | |
1934 | smr_val |= SCSMR_PE | SCSMR_ODD; | |
1935 | if (termios->c_cflag & CSTOPB) | |
1936 | smr_val |= SCSMR_STOP; | |
1937 | ||
154280fd MD |
1938 | /* |
1939 | * earlyprintk comes here early on with port->uartclk set to zero. | |
1940 | * the clock framework is not up and running at this point so here | |
1941 | * we assume that 115200 is the maximum baud rate. please note that | |
1942 | * the baud rate is not programmed during earlyprintk - it is assumed | |
1943 | * that the previous boot loader has enabled required clocks and | |
1944 | * setup the baud rate generator hardware for us already. | |
1945 | */ | |
1946 | max_baud = port->uartclk ? port->uartclk / 16 : 115200; | |
1da177e4 | 1947 | |
154280fd | 1948 | baud = uart_get_baud_rate(port, termios, old, 0, max_baud); |
f303b364 | 1949 | if (likely(baud && port->uartclk)) { |
ec09c5eb | 1950 | if (s->cfg->type == PORT_HSCIF) { |
730c4e78 | 1951 | int frame_len = sci_baud_calc_frame_len(smr_val); |
f303b364 | 1952 | sci_baud_calc_hscif(baud, port->uartclk, &t, &srr, |
730c4e78 | 1953 | &cks, frame_len); |
f303b364 | 1954 | } else { |
ec09c5eb | 1955 | t = sci_scbrr_calc(s, baud, port->uartclk); |
f303b364 UH |
1956 | for (cks = 0; t >= 256 && cks <= 3; cks++) |
1957 | t >>= 2; | |
1958 | } | |
1959 | } | |
e108b2ca | 1960 | |
23241d43 | 1961 | sci_port_enable(s); |
36003386 | 1962 | |
1ba76220 | 1963 | sci_reset(port); |
1da177e4 | 1964 | |
2944a331 | 1965 | smr_val |= serial_port_in(port, SCSMR) & SCSMR_CKS; |
1da177e4 LT |
1966 | |
1967 | uart_update_timeout(port, termios->c_cflag, baud); | |
1968 | ||
9d482cc3 TY |
1969 | dev_dbg(port->dev, "%s: SMR %x, cks %x, t %x, SCSCR %x\n", |
1970 | __func__, smr_val, cks, t, s->cfg->scscr); | |
73a19e4c | 1971 | |
4ffc3cdb | 1972 | if (t >= 0) { |
26de4f1b | 1973 | serial_port_out(port, SCSMR, (smr_val & ~SCSMR_CKS) | cks); |
b12bb29f | 1974 | serial_port_out(port, SCBRR, t); |
f303b364 UH |
1975 | reg = sci_getreg(port, HSSRR); |
1976 | if (reg->size) | |
1977 | serial_port_out(port, HSSRR, srr | HSCIF_SRE); | |
1da177e4 | 1978 | udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ |
9d482cc3 TY |
1979 | } else |
1980 | serial_port_out(port, SCSMR, smr_val); | |
1da177e4 | 1981 | |
d5701647 | 1982 | sci_init_pins(port, termios->c_cflag); |
0979e0e6 | 1983 | |
73c3d53f PM |
1984 | reg = sci_getreg(port, SCFCR); |
1985 | if (reg->size) { | |
b12bb29f | 1986 | unsigned short ctrl = serial_port_in(port, SCFCR); |
0979e0e6 | 1987 | |
73c3d53f | 1988 | if (s->cfg->capabilities & SCIx_HAVE_RTSCTS) { |
faf02f8f PM |
1989 | if (termios->c_cflag & CRTSCTS) |
1990 | ctrl |= SCFCR_MCE; | |
1991 | else | |
1992 | ctrl &= ~SCFCR_MCE; | |
faf02f8f | 1993 | } |
73c3d53f PM |
1994 | |
1995 | /* | |
1996 | * As we've done a sci_reset() above, ensure we don't | |
1997 | * interfere with the FIFOs while toggling MCE. As the | |
1998 | * reset values could still be set, simply mask them out. | |
1999 | */ | |
2000 | ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST); | |
2001 | ||
b12bb29f | 2002 | serial_port_out(port, SCFCR, ctrl); |
0979e0e6 | 2003 | } |
b7a76e4b | 2004 | |
b12bb29f | 2005 | serial_port_out(port, SCSCR, s->cfg->scscr); |
1da177e4 | 2006 | |
3089f381 GL |
2007 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
2008 | /* | |
5f6d8515 | 2009 | * Calculate delay for 2 DMA buffers (4 FIFO). |
f5835c1d GU |
2010 | * See serial_core.c::uart_update_timeout(). |
2011 | * With 10 bits (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above | |
2012 | * function calculates 1 jiffie for the data plus 5 jiffies for the | |
2013 | * "slop(e)." Then below we calculate 5 jiffies (20ms) for 2 DMA | |
2014 | * buffers (4 FIFO sizes), but when performing a faster transfer, the | |
2015 | * value obtained by this formula is too small. Therefore, if the value | |
2016 | * is smaller than 20ms, use 20ms as the timeout value for DMA. | |
3089f381 GL |
2017 | */ |
2018 | if (s->chan_rx) { | |
5f6d8515 NI |
2019 | unsigned int bits; |
2020 | ||
2021 | /* byte size and parity */ | |
2022 | switch (termios->c_cflag & CSIZE) { | |
2023 | case CS5: | |
2024 | bits = 7; | |
2025 | break; | |
2026 | case CS6: | |
2027 | bits = 8; | |
2028 | break; | |
2029 | case CS7: | |
2030 | bits = 9; | |
2031 | break; | |
2032 | default: | |
2033 | bits = 10; | |
2034 | break; | |
2035 | } | |
2036 | ||
2037 | if (termios->c_cflag & CSTOPB) | |
2038 | bits++; | |
2039 | if (termios->c_cflag & PARENB) | |
2040 | bits++; | |
2041 | s->rx_timeout = DIV_ROUND_UP((s->buf_len_rx * 2 * bits * HZ) / | |
2042 | (baud / 10), 10); | |
9b971cd2 | 2043 | dev_dbg(port->dev, "DMA Rx t-out %ums, tty t-out %u jiffies\n", |
3089f381 GL |
2044 | s->rx_timeout * 1000 / HZ, port->timeout); |
2045 | if (s->rx_timeout < msecs_to_jiffies(20)) | |
2046 | s->rx_timeout = msecs_to_jiffies(20); | |
2047 | } | |
2048 | #endif | |
2049 | ||
1da177e4 | 2050 | if ((termios->c_cflag & CREAD) != 0) |
73a19e4c | 2051 | sci_start_rx(port); |
36003386 | 2052 | |
23241d43 | 2053 | sci_port_disable(s); |
1da177e4 LT |
2054 | } |
2055 | ||
0174e5ca TK |
2056 | static void sci_pm(struct uart_port *port, unsigned int state, |
2057 | unsigned int oldstate) | |
2058 | { | |
2059 | struct sci_port *sci_port = to_sci_port(port); | |
2060 | ||
2061 | switch (state) { | |
d3dfe5d9 | 2062 | case UART_PM_STATE_OFF: |
0174e5ca TK |
2063 | sci_port_disable(sci_port); |
2064 | break; | |
2065 | default: | |
2066 | sci_port_enable(sci_port); | |
2067 | break; | |
2068 | } | |
2069 | } | |
2070 | ||
1da177e4 LT |
2071 | static const char *sci_type(struct uart_port *port) |
2072 | { | |
2073 | switch (port->type) { | |
e7c98dc7 MT |
2074 | case PORT_IRDA: |
2075 | return "irda"; | |
2076 | case PORT_SCI: | |
2077 | return "sci"; | |
2078 | case PORT_SCIF: | |
2079 | return "scif"; | |
2080 | case PORT_SCIFA: | |
2081 | return "scifa"; | |
d1d4b10c GL |
2082 | case PORT_SCIFB: |
2083 | return "scifb"; | |
f303b364 UH |
2084 | case PORT_HSCIF: |
2085 | return "hscif"; | |
1da177e4 LT |
2086 | } |
2087 | ||
fa43972f | 2088 | return NULL; |
1da177e4 LT |
2089 | } |
2090 | ||
f6e9495d PM |
2091 | static int sci_remap_port(struct uart_port *port) |
2092 | { | |
e4d6f911 | 2093 | struct sci_port *sport = to_sci_port(port); |
f6e9495d PM |
2094 | |
2095 | /* | |
2096 | * Nothing to do if there's already an established membase. | |
2097 | */ | |
2098 | if (port->membase) | |
2099 | return 0; | |
2100 | ||
2101 | if (port->flags & UPF_IOREMAP) { | |
e4d6f911 | 2102 | port->membase = ioremap_nocache(port->mapbase, sport->reg_size); |
f6e9495d PM |
2103 | if (unlikely(!port->membase)) { |
2104 | dev_err(port->dev, "can't remap port#%d\n", port->line); | |
2105 | return -ENXIO; | |
2106 | } | |
2107 | } else { | |
2108 | /* | |
2109 | * For the simple (and majority of) cases where we don't | |
2110 | * need to do any remapping, just cast the cookie | |
2111 | * directly. | |
2112 | */ | |
3af4e960 | 2113 | port->membase = (void __iomem *)(uintptr_t)port->mapbase; |
f6e9495d PM |
2114 | } |
2115 | ||
2116 | return 0; | |
2117 | } | |
2118 | ||
e2651647 | 2119 | static void sci_release_port(struct uart_port *port) |
1da177e4 | 2120 | { |
e4d6f911 YS |
2121 | struct sci_port *sport = to_sci_port(port); |
2122 | ||
e2651647 PM |
2123 | if (port->flags & UPF_IOREMAP) { |
2124 | iounmap(port->membase); | |
2125 | port->membase = NULL; | |
2126 | } | |
2127 | ||
e4d6f911 | 2128 | release_mem_region(port->mapbase, sport->reg_size); |
1da177e4 LT |
2129 | } |
2130 | ||
e2651647 | 2131 | static int sci_request_port(struct uart_port *port) |
1da177e4 | 2132 | { |
e2651647 | 2133 | struct resource *res; |
e4d6f911 | 2134 | struct sci_port *sport = to_sci_port(port); |
f6e9495d | 2135 | int ret; |
1da177e4 | 2136 | |
e4d6f911 YS |
2137 | res = request_mem_region(port->mapbase, sport->reg_size, |
2138 | dev_name(port->dev)); | |
2139 | if (unlikely(res == NULL)) { | |
2140 | dev_err(port->dev, "request_mem_region failed."); | |
e2651647 | 2141 | return -EBUSY; |
e4d6f911 | 2142 | } |
1da177e4 | 2143 | |
f6e9495d PM |
2144 | ret = sci_remap_port(port); |
2145 | if (unlikely(ret != 0)) { | |
2146 | release_resource(res); | |
2147 | return ret; | |
7ff731ae | 2148 | } |
e2651647 PM |
2149 | |
2150 | return 0; | |
2151 | } | |
2152 | ||
2153 | static void sci_config_port(struct uart_port *port, int flags) | |
2154 | { | |
2155 | if (flags & UART_CONFIG_TYPE) { | |
2156 | struct sci_port *sport = to_sci_port(port); | |
2157 | ||
2158 | port->type = sport->cfg->type; | |
2159 | sci_request_port(port); | |
2160 | } | |
1da177e4 LT |
2161 | } |
2162 | ||
2163 | static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) | |
2164 | { | |
1da177e4 LT |
2165 | if (ser->baud_base < 2400) |
2166 | /* No paper tape reader for Mitch.. */ | |
2167 | return -EINVAL; | |
2168 | ||
2169 | return 0; | |
2170 | } | |
2171 | ||
2172 | static struct uart_ops sci_uart_ops = { | |
2173 | .tx_empty = sci_tx_empty, | |
2174 | .set_mctrl = sci_set_mctrl, | |
2175 | .get_mctrl = sci_get_mctrl, | |
2176 | .start_tx = sci_start_tx, | |
2177 | .stop_tx = sci_stop_tx, | |
2178 | .stop_rx = sci_stop_rx, | |
1da177e4 LT |
2179 | .break_ctl = sci_break_ctl, |
2180 | .startup = sci_startup, | |
2181 | .shutdown = sci_shutdown, | |
2182 | .set_termios = sci_set_termios, | |
0174e5ca | 2183 | .pm = sci_pm, |
1da177e4 LT |
2184 | .type = sci_type, |
2185 | .release_port = sci_release_port, | |
2186 | .request_port = sci_request_port, | |
2187 | .config_port = sci_config_port, | |
2188 | .verify_port = sci_verify_port, | |
07d2a1a1 PM |
2189 | #ifdef CONFIG_CONSOLE_POLL |
2190 | .poll_get_char = sci_poll_get_char, | |
2191 | .poll_put_char = sci_poll_put_char, | |
2192 | #endif | |
1da177e4 LT |
2193 | }; |
2194 | ||
9671f099 | 2195 | static int sci_init_single(struct platform_device *dev, |
1fcc91a6 LP |
2196 | struct sci_port *sci_port, unsigned int index, |
2197 | struct plat_sci_port *p, bool early) | |
e108b2ca | 2198 | { |
73a19e4c | 2199 | struct uart_port *port = &sci_port->port; |
1fcc91a6 LP |
2200 | const struct resource *res; |
2201 | unsigned int i; | |
3127c6b2 | 2202 | int ret; |
e108b2ca | 2203 | |
50f0959a PM |
2204 | sci_port->cfg = p; |
2205 | ||
73a19e4c GL |
2206 | port->ops = &sci_uart_ops; |
2207 | port->iotype = UPIO_MEM; | |
2208 | port->line = index; | |
75136d48 | 2209 | |
89b5c1ab LP |
2210 | res = platform_get_resource(dev, IORESOURCE_MEM, 0); |
2211 | if (res == NULL) | |
2212 | return -ENOMEM; | |
1fcc91a6 | 2213 | |
89b5c1ab | 2214 | port->mapbase = res->start; |
e4d6f911 | 2215 | sci_port->reg_size = resource_size(res); |
1fcc91a6 | 2216 | |
89b5c1ab LP |
2217 | for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i) |
2218 | sci_port->irqs[i] = platform_get_irq(dev, i); | |
1fcc91a6 | 2219 | |
89b5c1ab LP |
2220 | /* The SCI generates several interrupts. They can be muxed together or |
2221 | * connected to different interrupt lines. In the muxed case only one | |
2222 | * interrupt resource is specified. In the non-muxed case three or four | |
2223 | * interrupt resources are specified, as the BRI interrupt is optional. | |
2224 | */ | |
2225 | if (sci_port->irqs[0] < 0) | |
2226 | return -ENXIO; | |
1fcc91a6 | 2227 | |
89b5c1ab LP |
2228 | if (sci_port->irqs[1] < 0) { |
2229 | sci_port->irqs[1] = sci_port->irqs[0]; | |
2230 | sci_port->irqs[2] = sci_port->irqs[0]; | |
2231 | sci_port->irqs[3] = sci_port->irqs[0]; | |
1fcc91a6 LP |
2232 | } |
2233 | ||
b545e4f4 LP |
2234 | if (p->regtype == SCIx_PROBE_REGTYPE) { |
2235 | ret = sci_probe_regmap(p); | |
2236 | if (unlikely(ret)) | |
2237 | return ret; | |
2238 | } | |
2239 | ||
75136d48 | 2240 | switch (p->type) { |
d1d4b10c GL |
2241 | case PORT_SCIFB: |
2242 | port->fifosize = 256; | |
2e0842a1 | 2243 | sci_port->overrun_reg = SCxSR; |
75c249fd | 2244 | sci_port->overrun_mask = SCIFA_ORER; |
f84b6bdc | 2245 | sci_port->sampling_rate = 16; |
d1d4b10c | 2246 | break; |
f303b364 UH |
2247 | case PORT_HSCIF: |
2248 | port->fifosize = 128; | |
2e0842a1 | 2249 | sci_port->overrun_reg = SCLSR; |
75c249fd | 2250 | sci_port->overrun_mask = SCLSR_ORER; |
f84b6bdc | 2251 | sci_port->sampling_rate = 0; |
f303b364 | 2252 | break; |
75136d48 | 2253 | case PORT_SCIFA: |
73a19e4c | 2254 | port->fifosize = 64; |
2e0842a1 | 2255 | sci_port->overrun_reg = SCxSR; |
75c249fd | 2256 | sci_port->overrun_mask = SCIFA_ORER; |
f84b6bdc | 2257 | sci_port->sampling_rate = 16; |
75136d48 MP |
2258 | break; |
2259 | case PORT_SCIF: | |
73a19e4c | 2260 | port->fifosize = 16; |
ec09c5eb | 2261 | if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) { |
2e0842a1 | 2262 | sci_port->overrun_reg = SCxSR; |
75c249fd | 2263 | sci_port->overrun_mask = SCIFA_ORER; |
f84b6bdc | 2264 | sci_port->sampling_rate = 16; |
ec09c5eb | 2265 | } else { |
2e0842a1 | 2266 | sci_port->overrun_reg = SCLSR; |
75c249fd | 2267 | sci_port->overrun_mask = SCLSR_ORER; |
f84b6bdc | 2268 | sci_port->sampling_rate = 32; |
ec09c5eb | 2269 | } |
75136d48 MP |
2270 | break; |
2271 | default: | |
73a19e4c | 2272 | port->fifosize = 1; |
2e0842a1 | 2273 | sci_port->overrun_reg = SCxSR; |
75c249fd | 2274 | sci_port->overrun_mask = SCI_ORER; |
f84b6bdc | 2275 | sci_port->sampling_rate = 32; |
75136d48 MP |
2276 | break; |
2277 | } | |
7b6fd3bf | 2278 | |
878fbb91 LP |
2279 | /* SCIFA on sh7723 and sh7724 need a custom sampling rate that doesn't |
2280 | * match the SoC datasheet, this should be investigated. Let platform | |
2281 | * data override the sampling rate for now. | |
ec09c5eb | 2282 | */ |
f84b6bdc GU |
2283 | if (p->sampling_rate) |
2284 | sci_port->sampling_rate = p->sampling_rate; | |
ec09c5eb | 2285 | |
1fcc91a6 | 2286 | if (!early) { |
c7ed1ab3 PM |
2287 | sci_port->iclk = clk_get(&dev->dev, "sci_ick"); |
2288 | if (IS_ERR(sci_port->iclk)) { | |
2289 | sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); | |
2290 | if (IS_ERR(sci_port->iclk)) { | |
2291 | dev_err(&dev->dev, "can't get iclk\n"); | |
2292 | return PTR_ERR(sci_port->iclk); | |
2293 | } | |
2294 | } | |
2295 | ||
2296 | /* | |
2297 | * The function clock is optional, ignore it if we can't | |
2298 | * find it. | |
2299 | */ | |
2300 | sci_port->fclk = clk_get(&dev->dev, "sci_fck"); | |
2301 | if (IS_ERR(sci_port->fclk)) | |
2302 | sci_port->fclk = NULL; | |
2303 | ||
73a19e4c | 2304 | port->dev = &dev->dev; |
5e50d2d6 MD |
2305 | |
2306 | pm_runtime_enable(&dev->dev); | |
7b6fd3bf | 2307 | } |
e108b2ca | 2308 | |
7ed7e071 MD |
2309 | sci_port->break_timer.data = (unsigned long)sci_port; |
2310 | sci_port->break_timer.function = sci_break_timer; | |
2311 | init_timer(&sci_port->break_timer); | |
2312 | ||
debf9507 PM |
2313 | /* |
2314 | * Establish some sensible defaults for the error detection. | |
2315 | */ | |
5da0f468 GU |
2316 | if (p->type == PORT_SCI) { |
2317 | sci_port->error_mask = SCI_DEFAULT_ERROR_MASK; | |
2318 | sci_port->error_clear = SCI_ERROR_CLEAR; | |
2319 | } else { | |
2320 | sci_port->error_mask = SCIF_DEFAULT_ERROR_MASK; | |
2321 | sci_port->error_clear = SCIF_ERROR_CLEAR; | |
2322 | } | |
debf9507 | 2323 | |
3ae988d9 LP |
2324 | /* |
2325 | * Make the error mask inclusive of overrun detection, if | |
2326 | * supported. | |
2327 | */ | |
5da0f468 | 2328 | if (sci_port->overrun_reg == SCxSR) { |
afd66db6 | 2329 | sci_port->error_mask |= sci_port->overrun_mask; |
5da0f468 GU |
2330 | sci_port->error_clear &= ~sci_port->overrun_mask; |
2331 | } | |
debf9507 | 2332 | |
ce6738b6 | 2333 | port->type = p->type; |
b6e4a3f1 | 2334 | port->flags = UPF_FIXED_PORT | p->flags; |
61a6976b | 2335 | port->regshift = p->regshift; |
73a19e4c | 2336 | |
ce6738b6 | 2337 | /* |
61a6976b | 2338 | * The UART port needs an IRQ value, so we peg this to the RX IRQ |
ce6738b6 PM |
2339 | * for the multi-IRQ ports, which is where we are primarily |
2340 | * concerned with the shutdown path synchronization. | |
2341 | * | |
2342 | * For the muxed case there's nothing more to do. | |
2343 | */ | |
1fcc91a6 | 2344 | port->irq = sci_port->irqs[SCIx_RXI_IRQ]; |
9cfb5c05 | 2345 | port->irqflags = 0; |
73a19e4c | 2346 | |
61a6976b PM |
2347 | port->serial_in = sci_serial_in; |
2348 | port->serial_out = sci_serial_out; | |
2349 | ||
937bb6e4 GL |
2350 | if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) |
2351 | dev_dbg(port->dev, "DMA tx %d, rx %d\n", | |
2352 | p->dma_slave_tx, p->dma_slave_rx); | |
7ed7e071 | 2353 | |
c7ed1ab3 | 2354 | return 0; |
e108b2ca PM |
2355 | } |
2356 | ||
6dae1421 LP |
2357 | static void sci_cleanup_single(struct sci_port *port) |
2358 | { | |
6dae1421 LP |
2359 | clk_put(port->iclk); |
2360 | clk_put(port->fclk); | |
2361 | ||
2362 | pm_runtime_disable(port->port.dev); | |
2363 | } | |
2364 | ||
1da177e4 | 2365 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE |
dc8e6f5b MD |
2366 | static void serial_console_putchar(struct uart_port *port, int ch) |
2367 | { | |
2368 | sci_poll_put_char(port, ch); | |
2369 | } | |
2370 | ||
1da177e4 LT |
2371 | /* |
2372 | * Print a string to the serial port trying not to disturb | |
2373 | * any possible real use of the port... | |
2374 | */ | |
2375 | static void serial_console_write(struct console *co, const char *s, | |
2376 | unsigned count) | |
2377 | { | |
906b17dc PM |
2378 | struct sci_port *sci_port = &sci_ports[co->index]; |
2379 | struct uart_port *port = &sci_port->port; | |
40f70c03 SK |
2380 | unsigned short bits, ctrl; |
2381 | unsigned long flags; | |
2382 | int locked = 1; | |
2383 | ||
2384 | local_irq_save(flags); | |
2385 | if (port->sysrq) | |
2386 | locked = 0; | |
2387 | else if (oops_in_progress) | |
2388 | locked = spin_trylock(&port->lock); | |
2389 | else | |
2390 | spin_lock(&port->lock); | |
2391 | ||
2392 | /* first save the SCSCR then disable the interrupts */ | |
2393 | ctrl = serial_port_in(port, SCSCR); | |
2394 | serial_port_out(port, SCSCR, sci_port->cfg->scscr); | |
07d2a1a1 | 2395 | |
501b825d | 2396 | uart_console_write(port, s, count, serial_console_putchar); |
973e5d52 MD |
2397 | |
2398 | /* wait until fifo is empty and last bit has been transmitted */ | |
2399 | bits = SCxSR_TDxE(port) | SCxSR_TEND(port); | |
b12bb29f | 2400 | while ((serial_port_in(port, SCxSR) & bits) != bits) |
973e5d52 | 2401 | cpu_relax(); |
40f70c03 SK |
2402 | |
2403 | /* restore the SCSCR */ | |
2404 | serial_port_out(port, SCSCR, ctrl); | |
2405 | ||
2406 | if (locked) | |
2407 | spin_unlock(&port->lock); | |
2408 | local_irq_restore(flags); | |
1da177e4 LT |
2409 | } |
2410 | ||
9671f099 | 2411 | static int serial_console_setup(struct console *co, char *options) |
1da177e4 | 2412 | { |
dc8e6f5b | 2413 | struct sci_port *sci_port; |
1da177e4 LT |
2414 | struct uart_port *port; |
2415 | int baud = 115200; | |
2416 | int bits = 8; | |
2417 | int parity = 'n'; | |
2418 | int flow = 'n'; | |
2419 | int ret; | |
2420 | ||
e108b2ca | 2421 | /* |
906b17dc | 2422 | * Refuse to handle any bogus ports. |
1da177e4 | 2423 | */ |
906b17dc | 2424 | if (co->index < 0 || co->index >= SCI_NPORTS) |
e108b2ca | 2425 | return -ENODEV; |
e108b2ca | 2426 | |
906b17dc PM |
2427 | sci_port = &sci_ports[co->index]; |
2428 | port = &sci_port->port; | |
2429 | ||
b2267a6b AC |
2430 | /* |
2431 | * Refuse to handle uninitialized ports. | |
2432 | */ | |
2433 | if (!port->ops) | |
2434 | return -ENODEV; | |
2435 | ||
f6e9495d PM |
2436 | ret = sci_remap_port(port); |
2437 | if (unlikely(ret != 0)) | |
2438 | return ret; | |
e108b2ca | 2439 | |
1da177e4 LT |
2440 | if (options) |
2441 | uart_parse_options(options, &baud, &parity, &bits, &flow); | |
2442 | ||
ab7cfb55 | 2443 | return uart_set_options(port, co, baud, parity, bits, flow); |
1da177e4 LT |
2444 | } |
2445 | ||
2446 | static struct console serial_console = { | |
2447 | .name = "ttySC", | |
906b17dc | 2448 | .device = uart_console_device, |
1da177e4 LT |
2449 | .write = serial_console_write, |
2450 | .setup = serial_console_setup, | |
fa5da2f7 | 2451 | .flags = CON_PRINTBUFFER, |
1da177e4 | 2452 | .index = -1, |
906b17dc | 2453 | .data = &sci_uart_driver, |
1da177e4 LT |
2454 | }; |
2455 | ||
7b6fd3bf MD |
2456 | static struct console early_serial_console = { |
2457 | .name = "early_ttySC", | |
2458 | .write = serial_console_write, | |
2459 | .flags = CON_PRINTBUFFER, | |
906b17dc | 2460 | .index = -1, |
7b6fd3bf | 2461 | }; |
ecdf8a46 | 2462 | |
7b6fd3bf MD |
2463 | static char early_serial_buf[32]; |
2464 | ||
9671f099 | 2465 | static int sci_probe_earlyprintk(struct platform_device *pdev) |
ecdf8a46 | 2466 | { |
574de559 | 2467 | struct plat_sci_port *cfg = dev_get_platdata(&pdev->dev); |
ecdf8a46 PM |
2468 | |
2469 | if (early_serial_console.data) | |
2470 | return -EEXIST; | |
2471 | ||
2472 | early_serial_console.index = pdev->id; | |
ecdf8a46 | 2473 | |
1fcc91a6 | 2474 | sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true); |
ecdf8a46 PM |
2475 | |
2476 | serial_console_setup(&early_serial_console, early_serial_buf); | |
2477 | ||
2478 | if (!strstr(early_serial_buf, "keep")) | |
2479 | early_serial_console.flags |= CON_BOOT; | |
2480 | ||
2481 | register_console(&early_serial_console); | |
2482 | return 0; | |
2483 | } | |
6a8c9799 NI |
2484 | |
2485 | #define SCI_CONSOLE (&serial_console) | |
2486 | ||
ecdf8a46 | 2487 | #else |
9671f099 | 2488 | static inline int sci_probe_earlyprintk(struct platform_device *pdev) |
ecdf8a46 PM |
2489 | { |
2490 | return -EINVAL; | |
2491 | } | |
1da177e4 | 2492 | |
6a8c9799 NI |
2493 | #define SCI_CONSOLE NULL |
2494 | ||
2495 | #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ | |
1da177e4 | 2496 | |
6c13d5d2 | 2497 | static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized"; |
1da177e4 LT |
2498 | |
2499 | static struct uart_driver sci_uart_driver = { | |
2500 | .owner = THIS_MODULE, | |
2501 | .driver_name = "sci", | |
1da177e4 LT |
2502 | .dev_name = "ttySC", |
2503 | .major = SCI_MAJOR, | |
2504 | .minor = SCI_MINOR_START, | |
e108b2ca | 2505 | .nr = SCI_NPORTS, |
1da177e4 LT |
2506 | .cons = SCI_CONSOLE, |
2507 | }; | |
2508 | ||
54507f6e | 2509 | static int sci_remove(struct platform_device *dev) |
e552de24 | 2510 | { |
d535a230 | 2511 | struct sci_port *port = platform_get_drvdata(dev); |
e552de24 | 2512 | |
d535a230 PM |
2513 | cpufreq_unregister_notifier(&port->freq_transition, |
2514 | CPUFREQ_TRANSITION_NOTIFIER); | |
e552de24 | 2515 | |
d535a230 PM |
2516 | uart_remove_one_port(&sci_uart_driver, &port->port); |
2517 | ||
6dae1421 | 2518 | sci_cleanup_single(port); |
e552de24 | 2519 | |
e552de24 MD |
2520 | return 0; |
2521 | } | |
2522 | ||
20bdcab8 BH |
2523 | struct sci_port_info { |
2524 | unsigned int type; | |
2525 | unsigned int regtype; | |
2526 | }; | |
2527 | ||
2528 | static const struct of_device_id of_sci_match[] = { | |
2529 | { | |
2530 | .compatible = "renesas,scif", | |
ff43da00 | 2531 | .data = &(const struct sci_port_info) { |
20bdcab8 BH |
2532 | .type = PORT_SCIF, |
2533 | .regtype = SCIx_SH4_SCIF_REGTYPE, | |
2534 | }, | |
2535 | }, { | |
2536 | .compatible = "renesas,scifa", | |
ff43da00 | 2537 | .data = &(const struct sci_port_info) { |
20bdcab8 BH |
2538 | .type = PORT_SCIFA, |
2539 | .regtype = SCIx_SCIFA_REGTYPE, | |
2540 | }, | |
2541 | }, { | |
2542 | .compatible = "renesas,scifb", | |
ff43da00 | 2543 | .data = &(const struct sci_port_info) { |
20bdcab8 BH |
2544 | .type = PORT_SCIFB, |
2545 | .regtype = SCIx_SCIFB_REGTYPE, | |
2546 | }, | |
2547 | }, { | |
2548 | .compatible = "renesas,hscif", | |
ff43da00 | 2549 | .data = &(const struct sci_port_info) { |
20bdcab8 BH |
2550 | .type = PORT_HSCIF, |
2551 | .regtype = SCIx_HSCIF_REGTYPE, | |
2552 | }, | |
e1d0be61 YS |
2553 | }, { |
2554 | .compatible = "renesas,sci", | |
2555 | .data = &(const struct sci_port_info) { | |
2556 | .type = PORT_SCI, | |
2557 | .regtype = SCIx_SCI_REGTYPE, | |
2558 | }, | |
20bdcab8 BH |
2559 | }, { |
2560 | /* Terminator */ | |
2561 | }, | |
2562 | }; | |
2563 | MODULE_DEVICE_TABLE(of, of_sci_match); | |
2564 | ||
2565 | static struct plat_sci_port * | |
2566 | sci_parse_dt(struct platform_device *pdev, unsigned int *dev_id) | |
2567 | { | |
2568 | struct device_node *np = pdev->dev.of_node; | |
2569 | const struct of_device_id *match; | |
2570 | const struct sci_port_info *info; | |
2571 | struct plat_sci_port *p; | |
2572 | int id; | |
2573 | ||
2574 | if (!IS_ENABLED(CONFIG_OF) || !np) | |
2575 | return NULL; | |
2576 | ||
2577 | match = of_match_node(of_sci_match, pdev->dev.of_node); | |
2578 | if (!match) | |
2579 | return NULL; | |
2580 | ||
2581 | info = match->data; | |
2582 | ||
2583 | p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL); | |
4205463c | 2584 | if (!p) |
20bdcab8 | 2585 | return NULL; |
20bdcab8 BH |
2586 | |
2587 | /* Get the line number for the aliases node. */ | |
2588 | id = of_alias_get_id(np, "serial"); | |
2589 | if (id < 0) { | |
2590 | dev_err(&pdev->dev, "failed to get alias id (%d)\n", id); | |
2591 | return NULL; | |
2592 | } | |
2593 | ||
2594 | *dev_id = id; | |
2595 | ||
2596 | p->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; | |
2597 | p->type = info->type; | |
2598 | p->regtype = info->regtype; | |
2599 | p->scscr = SCSCR_RE | SCSCR_TE; | |
2600 | ||
2601 | return p; | |
2602 | } | |
2603 | ||
9671f099 | 2604 | static int sci_probe_single(struct platform_device *dev, |
0ee70712 MD |
2605 | unsigned int index, |
2606 | struct plat_sci_port *p, | |
2607 | struct sci_port *sciport) | |
2608 | { | |
0ee70712 MD |
2609 | int ret; |
2610 | ||
2611 | /* Sanity check */ | |
2612 | if (unlikely(index >= SCI_NPORTS)) { | |
9b971cd2 | 2613 | dev_notice(&dev->dev, "Attempting to register port %d when only %d are available\n", |
0ee70712 | 2614 | index+1, SCI_NPORTS); |
9b971cd2 | 2615 | dev_notice(&dev->dev, "Consider bumping CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); |
b6c5ef6f | 2616 | return -EINVAL; |
0ee70712 MD |
2617 | } |
2618 | ||
1fcc91a6 | 2619 | ret = sci_init_single(dev, sciport, index, p, false); |
c7ed1ab3 PM |
2620 | if (ret) |
2621 | return ret; | |
0ee70712 | 2622 | |
6dae1421 LP |
2623 | ret = uart_add_one_port(&sci_uart_driver, &sciport->port); |
2624 | if (ret) { | |
2625 | sci_cleanup_single(sciport); | |
2626 | return ret; | |
2627 | } | |
2628 | ||
2629 | return 0; | |
0ee70712 MD |
2630 | } |
2631 | ||
9671f099 | 2632 | static int sci_probe(struct platform_device *dev) |
1da177e4 | 2633 | { |
20bdcab8 BH |
2634 | struct plat_sci_port *p; |
2635 | struct sci_port *sp; | |
2636 | unsigned int dev_id; | |
ecdf8a46 | 2637 | int ret; |
d535a230 | 2638 | |
ecdf8a46 PM |
2639 | /* |
2640 | * If we've come here via earlyprintk initialization, head off to | |
2641 | * the special early probe. We don't have sufficient device state | |
2642 | * to make it beyond this yet. | |
2643 | */ | |
2644 | if (is_early_platform_device(dev)) | |
2645 | return sci_probe_earlyprintk(dev); | |
7b6fd3bf | 2646 | |
20bdcab8 BH |
2647 | if (dev->dev.of_node) { |
2648 | p = sci_parse_dt(dev, &dev_id); | |
2649 | if (p == NULL) | |
2650 | return -EINVAL; | |
2651 | } else { | |
2652 | p = dev->dev.platform_data; | |
2653 | if (p == NULL) { | |
2654 | dev_err(&dev->dev, "no platform data supplied\n"); | |
2655 | return -EINVAL; | |
2656 | } | |
2657 | ||
2658 | dev_id = dev->id; | |
2659 | } | |
2660 | ||
2661 | sp = &sci_ports[dev_id]; | |
d535a230 | 2662 | platform_set_drvdata(dev, sp); |
e552de24 | 2663 | |
20bdcab8 | 2664 | ret = sci_probe_single(dev, dev_id, p, sp); |
d535a230 | 2665 | if (ret) |
6dae1421 | 2666 | return ret; |
e552de24 | 2667 | |
d535a230 | 2668 | sp->freq_transition.notifier_call = sci_notifier; |
1da177e4 | 2669 | |
d535a230 PM |
2670 | ret = cpufreq_register_notifier(&sp->freq_transition, |
2671 | CPUFREQ_TRANSITION_NOTIFIER); | |
6dae1421 | 2672 | if (unlikely(ret < 0)) { |
bf13c9a8 | 2673 | uart_remove_one_port(&sci_uart_driver, &sp->port); |
6dae1421 LP |
2674 | sci_cleanup_single(sp); |
2675 | return ret; | |
2676 | } | |
1da177e4 LT |
2677 | |
2678 | #ifdef CONFIG_SH_STANDARD_BIOS | |
2679 | sh_bios_gdb_detach(); | |
2680 | #endif | |
2681 | ||
e108b2ca | 2682 | return 0; |
1da177e4 LT |
2683 | } |
2684 | ||
cb876341 | 2685 | static __maybe_unused int sci_suspend(struct device *dev) |
1da177e4 | 2686 | { |
d535a230 | 2687 | struct sci_port *sport = dev_get_drvdata(dev); |
e108b2ca | 2688 | |
d535a230 PM |
2689 | if (sport) |
2690 | uart_suspend_port(&sci_uart_driver, &sport->port); | |
1da177e4 | 2691 | |
e108b2ca PM |
2692 | return 0; |
2693 | } | |
1da177e4 | 2694 | |
cb876341 | 2695 | static __maybe_unused int sci_resume(struct device *dev) |
e108b2ca | 2696 | { |
d535a230 | 2697 | struct sci_port *sport = dev_get_drvdata(dev); |
e108b2ca | 2698 | |
d535a230 PM |
2699 | if (sport) |
2700 | uart_resume_port(&sci_uart_driver, &sport->port); | |
e108b2ca PM |
2701 | |
2702 | return 0; | |
2703 | } | |
2704 | ||
cb876341 | 2705 | static SIMPLE_DEV_PM_OPS(sci_dev_pm_ops, sci_suspend, sci_resume); |
6daa79b3 | 2706 | |
e108b2ca PM |
2707 | static struct platform_driver sci_driver = { |
2708 | .probe = sci_probe, | |
b9e39c89 | 2709 | .remove = sci_remove, |
e108b2ca PM |
2710 | .driver = { |
2711 | .name = "sh-sci", | |
6daa79b3 | 2712 | .pm = &sci_dev_pm_ops, |
20bdcab8 | 2713 | .of_match_table = of_match_ptr(of_sci_match), |
e108b2ca PM |
2714 | }, |
2715 | }; | |
2716 | ||
2717 | static int __init sci_init(void) | |
2718 | { | |
2719 | int ret; | |
2720 | ||
6c13d5d2 | 2721 | pr_info("%s\n", banner); |
e108b2ca | 2722 | |
e108b2ca PM |
2723 | ret = uart_register_driver(&sci_uart_driver); |
2724 | if (likely(ret == 0)) { | |
2725 | ret = platform_driver_register(&sci_driver); | |
2726 | if (unlikely(ret)) | |
2727 | uart_unregister_driver(&sci_uart_driver); | |
2728 | } | |
2729 | ||
2730 | return ret; | |
2731 | } | |
2732 | ||
2733 | static void __exit sci_exit(void) | |
2734 | { | |
2735 | platform_driver_unregister(&sci_driver); | |
1da177e4 LT |
2736 | uart_unregister_driver(&sci_uart_driver); |
2737 | } | |
2738 | ||
7b6fd3bf MD |
2739 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE |
2740 | early_platform_init_buffer("earlyprintk", &sci_driver, | |
2741 | early_serial_buf, ARRAY_SIZE(early_serial_buf)); | |
2742 | #endif | |
1da177e4 LT |
2743 | module_init(sci_init); |
2744 | module_exit(sci_exit); | |
2745 | ||
e108b2ca | 2746 | MODULE_LICENSE("GPL"); |
e169c139 | 2747 | MODULE_ALIAS("platform:sh-sci"); |
7f405f9c | 2748 | MODULE_AUTHOR("Paul Mundt"); |
f303b364 | 2749 | MODULE_DESCRIPTION("SuperH (H)SCI(F) serial driver"); |