Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
1da177e4 LT |
2 | * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) |
3 | * | |
f43dc23d | 4 | * Copyright (C) 2002 - 2011 Paul Mundt |
3ea6bc3d | 5 | * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007). |
1da177e4 LT |
6 | * |
7 | * based off of the old drivers/char/sh-sci.c by: | |
8 | * | |
9 | * Copyright (C) 1999, 2000 Niibe Yutaka | |
10 | * Copyright (C) 2000 Sugioka Toshinobu | |
11 | * Modified to support multiple serial ports. Stuart Menefy (May 2000). | |
12 | * Modified to support SecureEdge. David McCullough (2002) | |
13 | * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003). | |
d89ddd1c | 14 | * Removed SH7300 support (Jul 2007). |
1da177e4 LT |
15 | * |
16 | * This file is subject to the terms and conditions of the GNU General Public | |
17 | * License. See the file "COPYING" in the main directory of this archive | |
18 | * for more details. | |
19 | */ | |
0b3d4ef6 PM |
20 | #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) |
21 | #define SUPPORT_SYSRQ | |
22 | #endif | |
1da177e4 LT |
23 | |
24 | #undef DEBUG | |
25 | ||
1da177e4 LT |
26 | #include <linux/module.h> |
27 | #include <linux/errno.h> | |
1da177e4 LT |
28 | #include <linux/timer.h> |
29 | #include <linux/interrupt.h> | |
30 | #include <linux/tty.h> | |
31 | #include <linux/tty_flip.h> | |
32 | #include <linux/serial.h> | |
33 | #include <linux/major.h> | |
34 | #include <linux/string.h> | |
35 | #include <linux/sysrq.h> | |
1da177e4 LT |
36 | #include <linux/ioport.h> |
37 | #include <linux/mm.h> | |
1da177e4 LT |
38 | #include <linux/init.h> |
39 | #include <linux/delay.h> | |
40 | #include <linux/console.h> | |
e108b2ca | 41 | #include <linux/platform_device.h> |
96de1a8f | 42 | #include <linux/serial_sci.h> |
1da177e4 | 43 | #include <linux/notifier.h> |
5e50d2d6 | 44 | #include <linux/pm_runtime.h> |
1da177e4 | 45 | #include <linux/cpufreq.h> |
85f094ec | 46 | #include <linux/clk.h> |
fa5da2f7 | 47 | #include <linux/ctype.h> |
7ff731ae | 48 | #include <linux/err.h> |
73a19e4c | 49 | #include <linux/dmaengine.h> |
5beabc7f | 50 | #include <linux/dma-mapping.h> |
73a19e4c | 51 | #include <linux/scatterlist.h> |
5a0e3ad6 | 52 | #include <linux/slab.h> |
50f0959a | 53 | #include <linux/gpio.h> |
85f094ec PM |
54 | |
55 | #ifdef CONFIG_SUPERH | |
1da177e4 LT |
56 | #include <asm/sh_bios.h> |
57 | #endif | |
58 | ||
1da177e4 LT |
59 | #include "sh-sci.h" |
60 | ||
e108b2ca PM |
61 | struct sci_port { |
62 | struct uart_port port; | |
63 | ||
ce6738b6 PM |
64 | /* Platform configuration */ |
65 | struct plat_sci_port *cfg; | |
e108b2ca | 66 | |
e108b2ca PM |
67 | /* Break timer */ |
68 | struct timer_list break_timer; | |
69 | int break_flag; | |
1534a3b3 | 70 | |
501b825d MD |
71 | /* Interface clock */ |
72 | struct clk *iclk; | |
c7ed1ab3 PM |
73 | /* Function clock */ |
74 | struct clk *fclk; | |
edad1f20 | 75 | |
9174fc8f | 76 | char *irqstr[SCIx_NR_IRQS]; |
50f0959a | 77 | char *gpiostr[SCIx_NR_FNS]; |
9174fc8f | 78 | |
73a19e4c GL |
79 | struct dma_chan *chan_tx; |
80 | struct dma_chan *chan_rx; | |
f43dc23d | 81 | |
73a19e4c | 82 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
73a19e4c GL |
83 | struct dma_async_tx_descriptor *desc_tx; |
84 | struct dma_async_tx_descriptor *desc_rx[2]; | |
85 | dma_cookie_t cookie_tx; | |
86 | dma_cookie_t cookie_rx[2]; | |
87 | dma_cookie_t active_rx; | |
88 | struct scatterlist sg_tx; | |
89 | unsigned int sg_len_tx; | |
90 | struct scatterlist sg_rx[2]; | |
91 | size_t buf_len_rx; | |
92 | struct sh_dmae_slave param_tx; | |
93 | struct sh_dmae_slave param_rx; | |
94 | struct work_struct work_tx; | |
95 | struct work_struct work_rx; | |
96 | struct timer_list rx_timer; | |
3089f381 | 97 | unsigned int rx_timeout; |
73a19e4c | 98 | #endif |
e552de24 | 99 | |
d535a230 | 100 | struct notifier_block freq_transition; |
1ba76220 MD |
101 | |
102 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE | |
103 | unsigned short saved_smr; | |
104 | unsigned short saved_fcr; | |
105 | unsigned char saved_brr; | |
106 | #endif | |
e108b2ca PM |
107 | }; |
108 | ||
1da177e4 | 109 | /* Function prototypes */ |
d535a230 | 110 | static void sci_start_tx(struct uart_port *port); |
b129a8cc | 111 | static void sci_stop_tx(struct uart_port *port); |
d535a230 | 112 | static void sci_start_rx(struct uart_port *port); |
1da177e4 | 113 | |
e108b2ca | 114 | #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS |
b7a76e4b | 115 | |
e108b2ca PM |
116 | static struct sci_port sci_ports[SCI_NPORTS]; |
117 | static struct uart_driver sci_uart_driver; | |
1da177e4 | 118 | |
e7c98dc7 MT |
119 | static inline struct sci_port * |
120 | to_sci_port(struct uart_port *uart) | |
121 | { | |
122 | return container_of(uart, struct sci_port, port); | |
123 | } | |
124 | ||
61a6976b PM |
125 | struct plat_sci_reg { |
126 | u8 offset, size; | |
127 | }; | |
128 | ||
129 | /* Helper for invalidating specific entries of an inherited map. */ | |
130 | #define sci_reg_invalid { .offset = 0, .size = 0 } | |
131 | ||
132 | static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { | |
133 | [SCIx_PROBE_REGTYPE] = { | |
134 | [0 ... SCIx_NR_REGS - 1] = sci_reg_invalid, | |
135 | }, | |
136 | ||
137 | /* | |
138 | * Common SCI definitions, dependent on the port's regshift | |
139 | * value. | |
140 | */ | |
141 | [SCIx_SCI_REGTYPE] = { | |
142 | [SCSMR] = { 0x00, 8 }, | |
143 | [SCBRR] = { 0x01, 8 }, | |
144 | [SCSCR] = { 0x02, 8 }, | |
145 | [SCxTDR] = { 0x03, 8 }, | |
146 | [SCxSR] = { 0x04, 8 }, | |
147 | [SCxRDR] = { 0x05, 8 }, | |
148 | [SCFCR] = sci_reg_invalid, | |
149 | [SCFDR] = sci_reg_invalid, | |
150 | [SCTFDR] = sci_reg_invalid, | |
151 | [SCRFDR] = sci_reg_invalid, | |
152 | [SCSPTR] = sci_reg_invalid, | |
153 | [SCLSR] = sci_reg_invalid, | |
154 | }, | |
155 | ||
156 | /* | |
157 | * Common definitions for legacy IrDA ports, dependent on | |
158 | * regshift value. | |
159 | */ | |
160 | [SCIx_IRDA_REGTYPE] = { | |
161 | [SCSMR] = { 0x00, 8 }, | |
162 | [SCBRR] = { 0x01, 8 }, | |
163 | [SCSCR] = { 0x02, 8 }, | |
164 | [SCxTDR] = { 0x03, 8 }, | |
165 | [SCxSR] = { 0x04, 8 }, | |
166 | [SCxRDR] = { 0x05, 8 }, | |
167 | [SCFCR] = { 0x06, 8 }, | |
168 | [SCFDR] = { 0x07, 16 }, | |
169 | [SCTFDR] = sci_reg_invalid, | |
170 | [SCRFDR] = sci_reg_invalid, | |
171 | [SCSPTR] = sci_reg_invalid, | |
172 | [SCLSR] = sci_reg_invalid, | |
173 | }, | |
174 | ||
175 | /* | |
176 | * Common SCIFA definitions. | |
177 | */ | |
178 | [SCIx_SCIFA_REGTYPE] = { | |
179 | [SCSMR] = { 0x00, 16 }, | |
180 | [SCBRR] = { 0x04, 8 }, | |
181 | [SCSCR] = { 0x08, 16 }, | |
182 | [SCxTDR] = { 0x20, 8 }, | |
183 | [SCxSR] = { 0x14, 16 }, | |
184 | [SCxRDR] = { 0x24, 8 }, | |
185 | [SCFCR] = { 0x18, 16 }, | |
186 | [SCFDR] = { 0x1c, 16 }, | |
187 | [SCTFDR] = sci_reg_invalid, | |
188 | [SCRFDR] = sci_reg_invalid, | |
189 | [SCSPTR] = sci_reg_invalid, | |
190 | [SCLSR] = sci_reg_invalid, | |
191 | }, | |
192 | ||
193 | /* | |
194 | * Common SCIFB definitions. | |
195 | */ | |
196 | [SCIx_SCIFB_REGTYPE] = { | |
197 | [SCSMR] = { 0x00, 16 }, | |
198 | [SCBRR] = { 0x04, 8 }, | |
199 | [SCSCR] = { 0x08, 16 }, | |
200 | [SCxTDR] = { 0x40, 8 }, | |
201 | [SCxSR] = { 0x14, 16 }, | |
202 | [SCxRDR] = { 0x60, 8 }, | |
203 | [SCFCR] = { 0x18, 16 }, | |
204 | [SCFDR] = { 0x1c, 16 }, | |
205 | [SCTFDR] = sci_reg_invalid, | |
206 | [SCRFDR] = sci_reg_invalid, | |
207 | [SCSPTR] = sci_reg_invalid, | |
208 | [SCLSR] = sci_reg_invalid, | |
209 | }, | |
210 | ||
3af1f8a4 PE |
211 | /* |
212 | * Common SH-2(A) SCIF definitions for ports with FIFO data | |
213 | * count registers. | |
214 | */ | |
215 | [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = { | |
216 | [SCSMR] = { 0x00, 16 }, | |
217 | [SCBRR] = { 0x04, 8 }, | |
218 | [SCSCR] = { 0x08, 16 }, | |
219 | [SCxTDR] = { 0x0c, 8 }, | |
220 | [SCxSR] = { 0x10, 16 }, | |
221 | [SCxRDR] = { 0x14, 8 }, | |
222 | [SCFCR] = { 0x18, 16 }, | |
223 | [SCFDR] = { 0x1c, 16 }, | |
224 | [SCTFDR] = sci_reg_invalid, | |
225 | [SCRFDR] = sci_reg_invalid, | |
226 | [SCSPTR] = { 0x20, 16 }, | |
227 | [SCLSR] = { 0x24, 16 }, | |
228 | }, | |
229 | ||
61a6976b PM |
230 | /* |
231 | * Common SH-3 SCIF definitions. | |
232 | */ | |
233 | [SCIx_SH3_SCIF_REGTYPE] = { | |
234 | [SCSMR] = { 0x00, 8 }, | |
235 | [SCBRR] = { 0x02, 8 }, | |
236 | [SCSCR] = { 0x04, 8 }, | |
237 | [SCxTDR] = { 0x06, 8 }, | |
238 | [SCxSR] = { 0x08, 16 }, | |
239 | [SCxRDR] = { 0x0a, 8 }, | |
240 | [SCFCR] = { 0x0c, 8 }, | |
241 | [SCFDR] = { 0x0e, 16 }, | |
242 | [SCTFDR] = sci_reg_invalid, | |
243 | [SCRFDR] = sci_reg_invalid, | |
244 | [SCSPTR] = sci_reg_invalid, | |
245 | [SCLSR] = sci_reg_invalid, | |
246 | }, | |
247 | ||
248 | /* | |
249 | * Common SH-4(A) SCIF(B) definitions. | |
250 | */ | |
251 | [SCIx_SH4_SCIF_REGTYPE] = { | |
252 | [SCSMR] = { 0x00, 16 }, | |
253 | [SCBRR] = { 0x04, 8 }, | |
254 | [SCSCR] = { 0x08, 16 }, | |
255 | [SCxTDR] = { 0x0c, 8 }, | |
256 | [SCxSR] = { 0x10, 16 }, | |
257 | [SCxRDR] = { 0x14, 8 }, | |
258 | [SCFCR] = { 0x18, 16 }, | |
259 | [SCFDR] = { 0x1c, 16 }, | |
260 | [SCTFDR] = sci_reg_invalid, | |
261 | [SCRFDR] = sci_reg_invalid, | |
262 | [SCSPTR] = { 0x20, 16 }, | |
263 | [SCLSR] = { 0x24, 16 }, | |
264 | }, | |
265 | ||
266 | /* | |
267 | * Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR | |
268 | * register. | |
269 | */ | |
270 | [SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = { | |
271 | [SCSMR] = { 0x00, 16 }, | |
272 | [SCBRR] = { 0x04, 8 }, | |
273 | [SCSCR] = { 0x08, 16 }, | |
274 | [SCxTDR] = { 0x0c, 8 }, | |
275 | [SCxSR] = { 0x10, 16 }, | |
276 | [SCxRDR] = { 0x14, 8 }, | |
277 | [SCFCR] = { 0x18, 16 }, | |
278 | [SCFDR] = { 0x1c, 16 }, | |
279 | [SCTFDR] = sci_reg_invalid, | |
280 | [SCRFDR] = sci_reg_invalid, | |
281 | [SCSPTR] = sci_reg_invalid, | |
282 | [SCLSR] = { 0x24, 16 }, | |
283 | }, | |
284 | ||
285 | /* | |
286 | * Common SH-4(A) SCIF(B) definitions for ports with FIFO data | |
287 | * count registers. | |
288 | */ | |
289 | [SCIx_SH4_SCIF_FIFODATA_REGTYPE] = { | |
290 | [SCSMR] = { 0x00, 16 }, | |
291 | [SCBRR] = { 0x04, 8 }, | |
292 | [SCSCR] = { 0x08, 16 }, | |
293 | [SCxTDR] = { 0x0c, 8 }, | |
294 | [SCxSR] = { 0x10, 16 }, | |
295 | [SCxRDR] = { 0x14, 8 }, | |
296 | [SCFCR] = { 0x18, 16 }, | |
297 | [SCFDR] = { 0x1c, 16 }, | |
298 | [SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */ | |
299 | [SCRFDR] = { 0x20, 16 }, | |
300 | [SCSPTR] = { 0x24, 16 }, | |
301 | [SCLSR] = { 0x28, 16 }, | |
302 | }, | |
303 | ||
304 | /* | |
305 | * SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR | |
306 | * registers. | |
307 | */ | |
308 | [SCIx_SH7705_SCIF_REGTYPE] = { | |
309 | [SCSMR] = { 0x00, 16 }, | |
310 | [SCBRR] = { 0x04, 8 }, | |
311 | [SCSCR] = { 0x08, 16 }, | |
312 | [SCxTDR] = { 0x20, 8 }, | |
313 | [SCxSR] = { 0x14, 16 }, | |
314 | [SCxRDR] = { 0x24, 8 }, | |
315 | [SCFCR] = { 0x18, 16 }, | |
316 | [SCFDR] = { 0x1c, 16 }, | |
317 | [SCTFDR] = sci_reg_invalid, | |
318 | [SCRFDR] = sci_reg_invalid, | |
319 | [SCSPTR] = sci_reg_invalid, | |
320 | [SCLSR] = sci_reg_invalid, | |
321 | }, | |
322 | }; | |
323 | ||
72b294cf PM |
324 | #define sci_getreg(up, offset) (sci_regmap[to_sci_port(up)->cfg->regtype] + offset) |
325 | ||
61a6976b PM |
326 | /* |
327 | * The "offset" here is rather misleading, in that it refers to an enum | |
328 | * value relative to the port mapping rather than the fixed offset | |
329 | * itself, which needs to be manually retrieved from the platform's | |
330 | * register map for the given port. | |
331 | */ | |
332 | static unsigned int sci_serial_in(struct uart_port *p, int offset) | |
333 | { | |
72b294cf | 334 | struct plat_sci_reg *reg = sci_getreg(p, offset); |
61a6976b PM |
335 | |
336 | if (reg->size == 8) | |
337 | return ioread8(p->membase + (reg->offset << p->regshift)); | |
338 | else if (reg->size == 16) | |
339 | return ioread16(p->membase + (reg->offset << p->regshift)); | |
340 | else | |
341 | WARN(1, "Invalid register access\n"); | |
342 | ||
343 | return 0; | |
344 | } | |
345 | ||
346 | static void sci_serial_out(struct uart_port *p, int offset, int value) | |
347 | { | |
72b294cf | 348 | struct plat_sci_reg *reg = sci_getreg(p, offset); |
61a6976b PM |
349 | |
350 | if (reg->size == 8) | |
351 | iowrite8(value, p->membase + (reg->offset << p->regshift)); | |
352 | else if (reg->size == 16) | |
353 | iowrite16(value, p->membase + (reg->offset << p->regshift)); | |
354 | else | |
355 | WARN(1, "Invalid register access\n"); | |
356 | } | |
357 | ||
61a6976b PM |
358 | static int sci_probe_regmap(struct plat_sci_port *cfg) |
359 | { | |
360 | switch (cfg->type) { | |
361 | case PORT_SCI: | |
362 | cfg->regtype = SCIx_SCI_REGTYPE; | |
363 | break; | |
364 | case PORT_IRDA: | |
365 | cfg->regtype = SCIx_IRDA_REGTYPE; | |
366 | break; | |
367 | case PORT_SCIFA: | |
368 | cfg->regtype = SCIx_SCIFA_REGTYPE; | |
369 | break; | |
370 | case PORT_SCIFB: | |
371 | cfg->regtype = SCIx_SCIFB_REGTYPE; | |
372 | break; | |
373 | case PORT_SCIF: | |
374 | /* | |
375 | * The SH-4 is a bit of a misnomer here, although that's | |
376 | * where this particular port layout originated. This | |
377 | * configuration (or some slight variation thereof) | |
378 | * remains the dominant model for all SCIFs. | |
379 | */ | |
380 | cfg->regtype = SCIx_SH4_SCIF_REGTYPE; | |
381 | break; | |
382 | default: | |
383 | printk(KERN_ERR "Can't probe register map for given port\n"); | |
384 | return -EINVAL; | |
385 | } | |
386 | ||
387 | return 0; | |
388 | } | |
389 | ||
23241d43 PM |
390 | static void sci_port_enable(struct sci_port *sci_port) |
391 | { | |
392 | if (!sci_port->port.dev) | |
393 | return; | |
394 | ||
395 | pm_runtime_get_sync(sci_port->port.dev); | |
396 | ||
397 | clk_enable(sci_port->iclk); | |
398 | sci_port->port.uartclk = clk_get_rate(sci_port->iclk); | |
399 | clk_enable(sci_port->fclk); | |
400 | } | |
401 | ||
402 | static void sci_port_disable(struct sci_port *sci_port) | |
403 | { | |
404 | if (!sci_port->port.dev) | |
405 | return; | |
406 | ||
407 | clk_disable(sci_port->fclk); | |
408 | clk_disable(sci_port->iclk); | |
409 | ||
410 | pm_runtime_put_sync(sci_port->port.dev); | |
411 | } | |
412 | ||
07d2a1a1 | 413 | #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) |
1f6fd5c9 PM |
414 | |
415 | #ifdef CONFIG_CONSOLE_POLL | |
07d2a1a1 | 416 | static int sci_poll_get_char(struct uart_port *port) |
1da177e4 | 417 | { |
1da177e4 LT |
418 | unsigned short status; |
419 | int c; | |
420 | ||
e108b2ca | 421 | do { |
b12bb29f | 422 | status = serial_port_in(port, SCxSR); |
1da177e4 | 423 | if (status & SCxSR_ERRORS(port)) { |
b12bb29f | 424 | serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); |
1da177e4 LT |
425 | continue; |
426 | } | |
3f255eb3 JW |
427 | break; |
428 | } while (1); | |
429 | ||
430 | if (!(status & SCxSR_RDxF(port))) | |
431 | return NO_POLL_CHAR; | |
07d2a1a1 | 432 | |
b12bb29f | 433 | c = serial_port_in(port, SCxRDR); |
07d2a1a1 | 434 | |
e7c98dc7 | 435 | /* Dummy read */ |
b12bb29f PM |
436 | serial_port_in(port, SCxSR); |
437 | serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); | |
1da177e4 LT |
438 | |
439 | return c; | |
440 | } | |
1f6fd5c9 | 441 | #endif |
1da177e4 | 442 | |
07d2a1a1 | 443 | static void sci_poll_put_char(struct uart_port *port, unsigned char c) |
1da177e4 | 444 | { |
1da177e4 LT |
445 | unsigned short status; |
446 | ||
1da177e4 | 447 | do { |
b12bb29f | 448 | status = serial_port_in(port, SCxSR); |
1da177e4 LT |
449 | } while (!(status & SCxSR_TDxE(port))); |
450 | ||
b12bb29f PM |
451 | serial_port_out(port, SCxTDR, c); |
452 | serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); | |
1da177e4 | 453 | } |
07d2a1a1 | 454 | #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ |
1da177e4 | 455 | |
61a6976b | 456 | static void sci_init_pins(struct uart_port *port, unsigned int cflag) |
1da177e4 | 457 | { |
61a6976b PM |
458 | struct sci_port *s = to_sci_port(port); |
459 | struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; | |
1da177e4 | 460 | |
61a6976b PM |
461 | /* |
462 | * Use port-specific handler if provided. | |
463 | */ | |
464 | if (s->cfg->ops && s->cfg->ops->init_pins) { | |
465 | s->cfg->ops->init_pins(port, cflag); | |
466 | return; | |
1da177e4 | 467 | } |
41504c39 | 468 | |
61a6976b PM |
469 | /* |
470 | * For the generic path SCSPTR is necessary. Bail out if that's | |
471 | * unavailable, too. | |
472 | */ | |
473 | if (!reg->size) | |
474 | return; | |
41504c39 | 475 | |
faf02f8f PM |
476 | if ((s->cfg->capabilities & SCIx_HAVE_RTSCTS) && |
477 | ((!(cflag & CRTSCTS)))) { | |
478 | unsigned short status; | |
479 | ||
b12bb29f | 480 | status = serial_port_in(port, SCSPTR); |
faf02f8f PM |
481 | status &= ~SCSPTR_CTSIO; |
482 | status |= SCSPTR_RTSIO; | |
b12bb29f | 483 | serial_port_out(port, SCSPTR, status); /* Set RTS = 1 */ |
faf02f8f | 484 | } |
d5701647 | 485 | } |
e108b2ca | 486 | |
72b294cf | 487 | static int sci_txfill(struct uart_port *port) |
e108b2ca | 488 | { |
72b294cf | 489 | struct plat_sci_reg *reg; |
e108b2ca | 490 | |
72b294cf PM |
491 | reg = sci_getreg(port, SCTFDR); |
492 | if (reg->size) | |
b12bb29f | 493 | return serial_port_in(port, SCTFDR) & 0xff; |
c63847a3 | 494 | |
72b294cf PM |
495 | reg = sci_getreg(port, SCFDR); |
496 | if (reg->size) | |
b12bb29f | 497 | return serial_port_in(port, SCFDR) >> 8; |
d1d4b10c | 498 | |
b12bb29f | 499 | return !(serial_port_in(port, SCxSR) & SCI_TDRE); |
e108b2ca PM |
500 | } |
501 | ||
73a19e4c GL |
502 | static int sci_txroom(struct uart_port *port) |
503 | { | |
72b294cf | 504 | return port->fifosize - sci_txfill(port); |
73a19e4c GL |
505 | } |
506 | ||
507 | static int sci_rxfill(struct uart_port *port) | |
e108b2ca | 508 | { |
72b294cf PM |
509 | struct plat_sci_reg *reg; |
510 | ||
511 | reg = sci_getreg(port, SCRFDR); | |
512 | if (reg->size) | |
b12bb29f | 513 | return serial_port_in(port, SCRFDR) & 0xff; |
72b294cf PM |
514 | |
515 | reg = sci_getreg(port, SCFDR); | |
516 | if (reg->size) | |
b12bb29f | 517 | return serial_port_in(port, SCFDR) & ((port->fifosize << 1) - 1); |
72b294cf | 518 | |
b12bb29f | 519 | return (serial_port_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; |
e108b2ca PM |
520 | } |
521 | ||
514820eb PM |
522 | /* |
523 | * SCI helper for checking the state of the muxed port/RXD pins. | |
524 | */ | |
525 | static inline int sci_rxd_in(struct uart_port *port) | |
526 | { | |
527 | struct sci_port *s = to_sci_port(port); | |
528 | ||
529 | if (s->cfg->port_reg <= 0) | |
530 | return 1; | |
531 | ||
532 | return !!__raw_readb(s->cfg->port_reg); | |
533 | } | |
534 | ||
1da177e4 LT |
535 | /* ********************************************************************** * |
536 | * the interrupt related routines * | |
537 | * ********************************************************************** */ | |
538 | ||
539 | static void sci_transmit_chars(struct uart_port *port) | |
540 | { | |
ebd2c8f6 | 541 | struct circ_buf *xmit = &port->state->xmit; |
1da177e4 | 542 | unsigned int stopped = uart_tx_stopped(port); |
1da177e4 LT |
543 | unsigned short status; |
544 | unsigned short ctrl; | |
e108b2ca | 545 | int count; |
1da177e4 | 546 | |
b12bb29f | 547 | status = serial_port_in(port, SCxSR); |
1da177e4 | 548 | if (!(status & SCxSR_TDxE(port))) { |
b12bb29f | 549 | ctrl = serial_port_in(port, SCSCR); |
e7c98dc7 | 550 | if (uart_circ_empty(xmit)) |
8e698614 | 551 | ctrl &= ~SCSCR_TIE; |
e7c98dc7 | 552 | else |
8e698614 | 553 | ctrl |= SCSCR_TIE; |
b12bb29f | 554 | serial_port_out(port, SCSCR, ctrl); |
1da177e4 LT |
555 | return; |
556 | } | |
557 | ||
72b294cf | 558 | count = sci_txroom(port); |
1da177e4 LT |
559 | |
560 | do { | |
561 | unsigned char c; | |
562 | ||
563 | if (port->x_char) { | |
564 | c = port->x_char; | |
565 | port->x_char = 0; | |
566 | } else if (!uart_circ_empty(xmit) && !stopped) { | |
567 | c = xmit->buf[xmit->tail]; | |
568 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
569 | } else { | |
570 | break; | |
571 | } | |
572 | ||
b12bb29f | 573 | serial_port_out(port, SCxTDR, c); |
1da177e4 LT |
574 | |
575 | port->icount.tx++; | |
576 | } while (--count > 0); | |
577 | ||
b12bb29f | 578 | serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); |
1da177e4 LT |
579 | |
580 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
581 | uart_write_wakeup(port); | |
582 | if (uart_circ_empty(xmit)) { | |
b129a8cc | 583 | sci_stop_tx(port); |
1da177e4 | 584 | } else { |
b12bb29f | 585 | ctrl = serial_port_in(port, SCSCR); |
1da177e4 | 586 | |
1a22f08d | 587 | if (port->type != PORT_SCI) { |
b12bb29f PM |
588 | serial_port_in(port, SCxSR); /* Dummy read */ |
589 | serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); | |
1da177e4 | 590 | } |
1da177e4 | 591 | |
8e698614 | 592 | ctrl |= SCSCR_TIE; |
b12bb29f | 593 | serial_port_out(port, SCSCR, ctrl); |
1da177e4 LT |
594 | } |
595 | } | |
596 | ||
597 | /* On SH3, SCIF may read end-of-break as a space->mark char */ | |
e7c98dc7 | 598 | #define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); }) |
1da177e4 | 599 | |
94c8b6db | 600 | static void sci_receive_chars(struct uart_port *port) |
1da177e4 | 601 | { |
e7c98dc7 | 602 | struct sci_port *sci_port = to_sci_port(port); |
ebd2c8f6 | 603 | struct tty_struct *tty = port->state->port.tty; |
1da177e4 LT |
604 | int i, count, copied = 0; |
605 | unsigned short status; | |
33f0f88f | 606 | unsigned char flag; |
1da177e4 | 607 | |
b12bb29f | 608 | status = serial_port_in(port, SCxSR); |
1da177e4 LT |
609 | if (!(status & SCxSR_RDxF(port))) |
610 | return; | |
611 | ||
612 | while (1) { | |
1da177e4 | 613 | /* Don't copy more bytes than there is room for in the buffer */ |
72b294cf | 614 | count = tty_buffer_request_room(tty, sci_rxfill(port)); |
1da177e4 LT |
615 | |
616 | /* If for any reason we can't copy more data, we're done! */ | |
617 | if (count == 0) | |
618 | break; | |
619 | ||
620 | if (port->type == PORT_SCI) { | |
b12bb29f | 621 | char c = serial_port_in(port, SCxRDR); |
e7c98dc7 MT |
622 | if (uart_handle_sysrq_char(port, c) || |
623 | sci_port->break_flag) | |
1da177e4 | 624 | count = 0; |
e7c98dc7 | 625 | else |
e108b2ca | 626 | tty_insert_flip_char(tty, c, TTY_NORMAL); |
1da177e4 | 627 | } else { |
e7c98dc7 | 628 | for (i = 0; i < count; i++) { |
b12bb29f | 629 | char c = serial_port_in(port, SCxRDR); |
d97fbbed | 630 | |
b12bb29f | 631 | status = serial_port_in(port, SCxSR); |
1da177e4 LT |
632 | #if defined(CONFIG_CPU_SH3) |
633 | /* Skip "chars" during break */ | |
e108b2ca | 634 | if (sci_port->break_flag) { |
1da177e4 LT |
635 | if ((c == 0) && |
636 | (status & SCxSR_FER(port))) { | |
637 | count--; i--; | |
638 | continue; | |
639 | } | |
e108b2ca | 640 | |
1da177e4 | 641 | /* Nonzero => end-of-break */ |
762c69e3 | 642 | dev_dbg(port->dev, "debounce<%02x>\n", c); |
e108b2ca PM |
643 | sci_port->break_flag = 0; |
644 | ||
1da177e4 LT |
645 | if (STEPFN(c)) { |
646 | count--; i--; | |
647 | continue; | |
648 | } | |
649 | } | |
650 | #endif /* CONFIG_CPU_SH3 */ | |
7d12e780 | 651 | if (uart_handle_sysrq_char(port, c)) { |
1da177e4 LT |
652 | count--; i--; |
653 | continue; | |
654 | } | |
655 | ||
656 | /* Store data and status */ | |
73a19e4c | 657 | if (status & SCxSR_FER(port)) { |
33f0f88f | 658 | flag = TTY_FRAME; |
d97fbbed | 659 | port->icount.frame++; |
762c69e3 | 660 | dev_notice(port->dev, "frame error\n"); |
73a19e4c | 661 | } else if (status & SCxSR_PER(port)) { |
33f0f88f | 662 | flag = TTY_PARITY; |
d97fbbed | 663 | port->icount.parity++; |
762c69e3 | 664 | dev_notice(port->dev, "parity error\n"); |
33f0f88f AC |
665 | } else |
666 | flag = TTY_NORMAL; | |
762c69e3 | 667 | |
33f0f88f | 668 | tty_insert_flip_char(tty, c, flag); |
1da177e4 LT |
669 | } |
670 | } | |
671 | ||
b12bb29f PM |
672 | serial_port_in(port, SCxSR); /* dummy read */ |
673 | serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); | |
1da177e4 | 674 | |
1da177e4 LT |
675 | copied += count; |
676 | port->icount.rx += count; | |
677 | } | |
678 | ||
679 | if (copied) { | |
680 | /* Tell the rest of the system the news. New characters! */ | |
681 | tty_flip_buffer_push(tty); | |
682 | } else { | |
b12bb29f PM |
683 | serial_port_in(port, SCxSR); /* dummy read */ |
684 | serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); | |
1da177e4 LT |
685 | } |
686 | } | |
687 | ||
688 | #define SCI_BREAK_JIFFIES (HZ/20) | |
94c8b6db PM |
689 | |
690 | /* | |
691 | * The sci generates interrupts during the break, | |
1da177e4 LT |
692 | * 1 per millisecond or so during the break period, for 9600 baud. |
693 | * So dont bother disabling interrupts. | |
694 | * But dont want more than 1 break event. | |
695 | * Use a kernel timer to periodically poll the rx line until | |
696 | * the break is finished. | |
697 | */ | |
94c8b6db | 698 | static inline void sci_schedule_break_timer(struct sci_port *port) |
1da177e4 | 699 | { |
bc9b3f5c | 700 | mod_timer(&port->break_timer, jiffies + SCI_BREAK_JIFFIES); |
1da177e4 | 701 | } |
94c8b6db | 702 | |
1da177e4 LT |
703 | /* Ensure that two consecutive samples find the break over. */ |
704 | static void sci_break_timer(unsigned long data) | |
705 | { | |
e108b2ca PM |
706 | struct sci_port *port = (struct sci_port *)data; |
707 | ||
23241d43 | 708 | sci_port_enable(port); |
5e50d2d6 | 709 | |
e108b2ca | 710 | if (sci_rxd_in(&port->port) == 0) { |
1da177e4 | 711 | port->break_flag = 1; |
e108b2ca PM |
712 | sci_schedule_break_timer(port); |
713 | } else if (port->break_flag == 1) { | |
1da177e4 LT |
714 | /* break is over. */ |
715 | port->break_flag = 2; | |
e108b2ca PM |
716 | sci_schedule_break_timer(port); |
717 | } else | |
718 | port->break_flag = 0; | |
5e50d2d6 | 719 | |
23241d43 | 720 | sci_port_disable(port); |
1da177e4 LT |
721 | } |
722 | ||
94c8b6db | 723 | static int sci_handle_errors(struct uart_port *port) |
1da177e4 LT |
724 | { |
725 | int copied = 0; | |
b12bb29f | 726 | unsigned short status = serial_port_in(port, SCxSR); |
ebd2c8f6 | 727 | struct tty_struct *tty = port->state->port.tty; |
debf9507 | 728 | struct sci_port *s = to_sci_port(port); |
1da177e4 | 729 | |
debf9507 PM |
730 | /* |
731 | * Handle overruns, if supported. | |
732 | */ | |
733 | if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) { | |
734 | if (status & (1 << s->cfg->overrun_bit)) { | |
d97fbbed PM |
735 | port->icount.overrun++; |
736 | ||
debf9507 PM |
737 | /* overrun error */ |
738 | if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) | |
739 | copied++; | |
762c69e3 | 740 | |
debf9507 PM |
741 | dev_notice(port->dev, "overrun error"); |
742 | } | |
1da177e4 LT |
743 | } |
744 | ||
e108b2ca | 745 | if (status & SCxSR_FER(port)) { |
1da177e4 LT |
746 | if (sci_rxd_in(port) == 0) { |
747 | /* Notify of BREAK */ | |
e7c98dc7 | 748 | struct sci_port *sci_port = to_sci_port(port); |
e108b2ca PM |
749 | |
750 | if (!sci_port->break_flag) { | |
d97fbbed PM |
751 | port->icount.brk++; |
752 | ||
e108b2ca PM |
753 | sci_port->break_flag = 1; |
754 | sci_schedule_break_timer(sci_port); | |
755 | ||
1da177e4 | 756 | /* Do sysrq handling. */ |
e108b2ca | 757 | if (uart_handle_break(port)) |
1da177e4 | 758 | return 0; |
762c69e3 PM |
759 | |
760 | dev_dbg(port->dev, "BREAK detected\n"); | |
761 | ||
e108b2ca | 762 | if (tty_insert_flip_char(tty, 0, TTY_BREAK)) |
e7c98dc7 MT |
763 | copied++; |
764 | } | |
765 | ||
e108b2ca | 766 | } else { |
1da177e4 | 767 | /* frame error */ |
d97fbbed PM |
768 | port->icount.frame++; |
769 | ||
e108b2ca | 770 | if (tty_insert_flip_char(tty, 0, TTY_FRAME)) |
33f0f88f | 771 | copied++; |
762c69e3 PM |
772 | |
773 | dev_notice(port->dev, "frame error\n"); | |
1da177e4 LT |
774 | } |
775 | } | |
776 | ||
e108b2ca | 777 | if (status & SCxSR_PER(port)) { |
1da177e4 | 778 | /* parity error */ |
d97fbbed PM |
779 | port->icount.parity++; |
780 | ||
e108b2ca PM |
781 | if (tty_insert_flip_char(tty, 0, TTY_PARITY)) |
782 | copied++; | |
762c69e3 PM |
783 | |
784 | dev_notice(port->dev, "parity error"); | |
1da177e4 LT |
785 | } |
786 | ||
33f0f88f | 787 | if (copied) |
1da177e4 | 788 | tty_flip_buffer_push(tty); |
1da177e4 LT |
789 | |
790 | return copied; | |
791 | } | |
792 | ||
94c8b6db | 793 | static int sci_handle_fifo_overrun(struct uart_port *port) |
d830fa45 | 794 | { |
ebd2c8f6 | 795 | struct tty_struct *tty = port->state->port.tty; |
debf9507 | 796 | struct sci_port *s = to_sci_port(port); |
4b8c59a3 | 797 | struct plat_sci_reg *reg; |
d830fa45 PM |
798 | int copied = 0; |
799 | ||
4b8c59a3 PM |
800 | reg = sci_getreg(port, SCLSR); |
801 | if (!reg->size) | |
d830fa45 PM |
802 | return 0; |
803 | ||
b12bb29f PM |
804 | if ((serial_port_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) { |
805 | serial_port_out(port, SCLSR, 0); | |
d830fa45 | 806 | |
d97fbbed PM |
807 | port->icount.overrun++; |
808 | ||
d830fa45 PM |
809 | tty_insert_flip_char(tty, 0, TTY_OVERRUN); |
810 | tty_flip_buffer_push(tty); | |
811 | ||
812 | dev_notice(port->dev, "overrun error\n"); | |
813 | copied++; | |
814 | } | |
815 | ||
816 | return copied; | |
817 | } | |
818 | ||
94c8b6db | 819 | static int sci_handle_breaks(struct uart_port *port) |
1da177e4 LT |
820 | { |
821 | int copied = 0; | |
b12bb29f | 822 | unsigned short status = serial_port_in(port, SCxSR); |
ebd2c8f6 | 823 | struct tty_struct *tty = port->state->port.tty; |
a5660ada | 824 | struct sci_port *s = to_sci_port(port); |
1da177e4 | 825 | |
0b3d4ef6 PM |
826 | if (uart_handle_break(port)) |
827 | return 0; | |
828 | ||
b7a76e4b | 829 | if (!s->break_flag && status & SCxSR_BRK(port)) { |
1da177e4 LT |
830 | #if defined(CONFIG_CPU_SH3) |
831 | /* Debounce break */ | |
832 | s->break_flag = 1; | |
833 | #endif | |
d97fbbed PM |
834 | |
835 | port->icount.brk++; | |
836 | ||
1da177e4 | 837 | /* Notify of BREAK */ |
e108b2ca | 838 | if (tty_insert_flip_char(tty, 0, TTY_BREAK)) |
33f0f88f | 839 | copied++; |
762c69e3 PM |
840 | |
841 | dev_dbg(port->dev, "BREAK detected\n"); | |
1da177e4 LT |
842 | } |
843 | ||
33f0f88f | 844 | if (copied) |
1da177e4 | 845 | tty_flip_buffer_push(tty); |
e108b2ca | 846 | |
d830fa45 PM |
847 | copied += sci_handle_fifo_overrun(port); |
848 | ||
1da177e4 LT |
849 | return copied; |
850 | } | |
851 | ||
73a19e4c | 852 | static irqreturn_t sci_rx_interrupt(int irq, void *ptr) |
1da177e4 | 853 | { |
73a19e4c GL |
854 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
855 | struct uart_port *port = ptr; | |
856 | struct sci_port *s = to_sci_port(port); | |
857 | ||
858 | if (s->chan_rx) { | |
b12bb29f PM |
859 | u16 scr = serial_port_in(port, SCSCR); |
860 | u16 ssr = serial_port_in(port, SCxSR); | |
73a19e4c GL |
861 | |
862 | /* Disable future Rx interrupts */ | |
d1d4b10c | 863 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { |
3089f381 GL |
864 | disable_irq_nosync(irq); |
865 | scr |= 0x4000; | |
866 | } else { | |
f43dc23d | 867 | scr &= ~SCSCR_RIE; |
3089f381 | 868 | } |
b12bb29f | 869 | serial_port_out(port, SCSCR, scr); |
73a19e4c | 870 | /* Clear current interrupt */ |
b12bb29f | 871 | serial_port_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port))); |
3089f381 GL |
872 | dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n", |
873 | jiffies, s->rx_timeout); | |
874 | mod_timer(&s->rx_timer, jiffies + s->rx_timeout); | |
73a19e4c GL |
875 | |
876 | return IRQ_HANDLED; | |
877 | } | |
878 | #endif | |
879 | ||
1da177e4 LT |
880 | /* I think sci_receive_chars has to be called irrespective |
881 | * of whether the I_IXOFF is set, otherwise, how is the interrupt | |
882 | * to be disabled? | |
883 | */ | |
73a19e4c | 884 | sci_receive_chars(ptr); |
1da177e4 LT |
885 | |
886 | return IRQ_HANDLED; | |
887 | } | |
888 | ||
7d12e780 | 889 | static irqreturn_t sci_tx_interrupt(int irq, void *ptr) |
1da177e4 LT |
890 | { |
891 | struct uart_port *port = ptr; | |
fd78a76a | 892 | unsigned long flags; |
1da177e4 | 893 | |
fd78a76a | 894 | spin_lock_irqsave(&port->lock, flags); |
1da177e4 | 895 | sci_transmit_chars(port); |
fd78a76a | 896 | spin_unlock_irqrestore(&port->lock, flags); |
1da177e4 LT |
897 | |
898 | return IRQ_HANDLED; | |
899 | } | |
900 | ||
7d12e780 | 901 | static irqreturn_t sci_er_interrupt(int irq, void *ptr) |
1da177e4 LT |
902 | { |
903 | struct uart_port *port = ptr; | |
904 | ||
905 | /* Handle errors */ | |
906 | if (port->type == PORT_SCI) { | |
907 | if (sci_handle_errors(port)) { | |
908 | /* discard character in rx buffer */ | |
b12bb29f PM |
909 | serial_port_in(port, SCxSR); |
910 | serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); | |
1da177e4 LT |
911 | } |
912 | } else { | |
d830fa45 | 913 | sci_handle_fifo_overrun(port); |
7d12e780 | 914 | sci_rx_interrupt(irq, ptr); |
1da177e4 LT |
915 | } |
916 | ||
b12bb29f | 917 | serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); |
1da177e4 LT |
918 | |
919 | /* Kick the transmission */ | |
7d12e780 | 920 | sci_tx_interrupt(irq, ptr); |
1da177e4 LT |
921 | |
922 | return IRQ_HANDLED; | |
923 | } | |
924 | ||
7d12e780 | 925 | static irqreturn_t sci_br_interrupt(int irq, void *ptr) |
1da177e4 LT |
926 | { |
927 | struct uart_port *port = ptr; | |
928 | ||
929 | /* Handle BREAKs */ | |
930 | sci_handle_breaks(port); | |
b12bb29f | 931 | serial_port_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); |
1da177e4 LT |
932 | |
933 | return IRQ_HANDLED; | |
934 | } | |
935 | ||
f43dc23d PM |
936 | static inline unsigned long port_rx_irq_mask(struct uart_port *port) |
937 | { | |
938 | /* | |
939 | * Not all ports (such as SCIFA) will support REIE. Rather than | |
940 | * special-casing the port type, we check the port initialization | |
941 | * IRQ enable mask to see whether the IRQ is desired at all. If | |
942 | * it's unset, it's logically inferred that there's no point in | |
943 | * testing for it. | |
944 | */ | |
ce6738b6 | 945 | return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE); |
f43dc23d PM |
946 | } |
947 | ||
7d12e780 | 948 | static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) |
1da177e4 | 949 | { |
44e18e9e | 950 | unsigned short ssr_status, scr_status, err_enabled; |
a8884e34 | 951 | struct uart_port *port = ptr; |
73a19e4c | 952 | struct sci_port *s = to_sci_port(port); |
a8884e34 | 953 | irqreturn_t ret = IRQ_NONE; |
1da177e4 | 954 | |
b12bb29f PM |
955 | ssr_status = serial_port_in(port, SCxSR); |
956 | scr_status = serial_port_in(port, SCSCR); | |
f43dc23d | 957 | err_enabled = scr_status & port_rx_irq_mask(port); |
1da177e4 LT |
958 | |
959 | /* Tx Interrupt */ | |
f43dc23d | 960 | if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) && |
73a19e4c | 961 | !s->chan_tx) |
a8884e34 | 962 | ret = sci_tx_interrupt(irq, ptr); |
f43dc23d | 963 | |
73a19e4c GL |
964 | /* |
965 | * Rx Interrupt: if we're using DMA, the DMA controller clears RDF / | |
966 | * DR flags | |
967 | */ | |
968 | if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) && | |
f43dc23d | 969 | (scr_status & SCSCR_RIE)) |
a8884e34 | 970 | ret = sci_rx_interrupt(irq, ptr); |
f43dc23d | 971 | |
1da177e4 | 972 | /* Error Interrupt */ |
dd4da3a5 | 973 | if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) |
a8884e34 | 974 | ret = sci_er_interrupt(irq, ptr); |
f43dc23d | 975 | |
1da177e4 | 976 | /* Break Interrupt */ |
dd4da3a5 | 977 | if ((ssr_status & SCxSR_BRK(port)) && err_enabled) |
a8884e34 | 978 | ret = sci_br_interrupt(irq, ptr); |
1da177e4 | 979 | |
a8884e34 | 980 | return ret; |
1da177e4 LT |
981 | } |
982 | ||
1da177e4 | 983 | /* |
25985edc | 984 | * Here we define a transition notifier so that we can update all of our |
1da177e4 LT |
985 | * ports' baud rate when the peripheral clock changes. |
986 | */ | |
e108b2ca PM |
987 | static int sci_notifier(struct notifier_block *self, |
988 | unsigned long phase, void *p) | |
1da177e4 | 989 | { |
e552de24 MD |
990 | struct sci_port *sci_port; |
991 | unsigned long flags; | |
1da177e4 | 992 | |
d535a230 PM |
993 | sci_port = container_of(self, struct sci_port, freq_transition); |
994 | ||
1da177e4 | 995 | if ((phase == CPUFREQ_POSTCHANGE) || |
e552de24 | 996 | (phase == CPUFREQ_RESUMECHANGE)) { |
d535a230 | 997 | struct uart_port *port = &sci_port->port; |
073e84c9 | 998 | |
d535a230 PM |
999 | spin_lock_irqsave(&port->lock, flags); |
1000 | port->uartclk = clk_get_rate(sci_port->iclk); | |
1001 | spin_unlock_irqrestore(&port->lock, flags); | |
e552de24 | 1002 | } |
1da177e4 | 1003 | |
1da177e4 LT |
1004 | return NOTIFY_OK; |
1005 | } | |
501b825d | 1006 | |
9174fc8f PM |
1007 | static struct sci_irq_desc { |
1008 | const char *desc; | |
1009 | irq_handler_t handler; | |
1010 | } sci_irq_desc[] = { | |
1011 | /* | |
1012 | * Split out handlers, the default case. | |
1013 | */ | |
1014 | [SCIx_ERI_IRQ] = { | |
1015 | .desc = "rx err", | |
1016 | .handler = sci_er_interrupt, | |
1017 | }, | |
1018 | ||
1019 | [SCIx_RXI_IRQ] = { | |
1020 | .desc = "rx full", | |
1021 | .handler = sci_rx_interrupt, | |
1022 | }, | |
1023 | ||
1024 | [SCIx_TXI_IRQ] = { | |
1025 | .desc = "tx empty", | |
1026 | .handler = sci_tx_interrupt, | |
1027 | }, | |
1028 | ||
1029 | [SCIx_BRI_IRQ] = { | |
1030 | .desc = "break", | |
1031 | .handler = sci_br_interrupt, | |
1032 | }, | |
1033 | ||
1034 | /* | |
1035 | * Special muxed handler. | |
1036 | */ | |
1037 | [SCIx_MUX_IRQ] = { | |
1038 | .desc = "mux", | |
1039 | .handler = sci_mpxed_interrupt, | |
1040 | }, | |
1041 | }; | |
1042 | ||
1da177e4 LT |
1043 | static int sci_request_irq(struct sci_port *port) |
1044 | { | |
9174fc8f PM |
1045 | struct uart_port *up = &port->port; |
1046 | int i, j, ret = 0; | |
1047 | ||
1048 | for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) { | |
1049 | struct sci_irq_desc *desc; | |
1050 | unsigned int irq; | |
1051 | ||
1052 | if (SCIx_IRQ_IS_MUXED(port)) { | |
1053 | i = SCIx_MUX_IRQ; | |
1054 | irq = up->irq; | |
0e8963de | 1055 | } else { |
9174fc8f PM |
1056 | irq = port->cfg->irqs[i]; |
1057 | ||
0e8963de PM |
1058 | /* |
1059 | * Certain port types won't support all of the | |
1060 | * available interrupt sources. | |
1061 | */ | |
1062 | if (unlikely(!irq)) | |
1063 | continue; | |
1064 | } | |
1065 | ||
9174fc8f PM |
1066 | desc = sci_irq_desc + i; |
1067 | port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s", | |
1068 | dev_name(up->dev), desc->desc); | |
1069 | if (!port->irqstr[j]) { | |
1070 | dev_err(up->dev, "Failed to allocate %s IRQ string\n", | |
1071 | desc->desc); | |
1072 | goto out_nomem; | |
1da177e4 | 1073 | } |
9174fc8f PM |
1074 | |
1075 | ret = request_irq(irq, desc->handler, up->irqflags, | |
1076 | port->irqstr[j], port); | |
1077 | if (unlikely(ret)) { | |
1078 | dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc); | |
1079 | goto out_noirq; | |
1da177e4 LT |
1080 | } |
1081 | } | |
1082 | ||
1083 | return 0; | |
9174fc8f PM |
1084 | |
1085 | out_noirq: | |
1086 | while (--i >= 0) | |
1087 | free_irq(port->cfg->irqs[i], port); | |
1088 | ||
1089 | out_nomem: | |
1090 | while (--j >= 0) | |
1091 | kfree(port->irqstr[j]); | |
1092 | ||
1093 | return ret; | |
1da177e4 LT |
1094 | } |
1095 | ||
1096 | static void sci_free_irq(struct sci_port *port) | |
1097 | { | |
1098 | int i; | |
1099 | ||
9174fc8f PM |
1100 | /* |
1101 | * Intentionally in reverse order so we iterate over the muxed | |
1102 | * IRQ first. | |
1103 | */ | |
1104 | for (i = 0; i < SCIx_NR_IRQS; i++) { | |
0e8963de PM |
1105 | unsigned int irq = port->cfg->irqs[i]; |
1106 | ||
1107 | /* | |
1108 | * Certain port types won't support all of the available | |
1109 | * interrupt sources. | |
1110 | */ | |
1111 | if (unlikely(!irq)) | |
1112 | continue; | |
1113 | ||
9174fc8f PM |
1114 | free_irq(port->cfg->irqs[i], port); |
1115 | kfree(port->irqstr[i]); | |
1da177e4 | 1116 | |
9174fc8f PM |
1117 | if (SCIx_IRQ_IS_MUXED(port)) { |
1118 | /* If there's only one IRQ, we're done. */ | |
1119 | return; | |
1da177e4 LT |
1120 | } |
1121 | } | |
1122 | } | |
1123 | ||
50f0959a PM |
1124 | static const char *sci_gpio_names[SCIx_NR_FNS] = { |
1125 | "sck", "rxd", "txd", "cts", "rts", | |
1126 | }; | |
1127 | ||
1128 | static const char *sci_gpio_str(unsigned int index) | |
1129 | { | |
1130 | return sci_gpio_names[index]; | |
1131 | } | |
1132 | ||
1133 | static void __devinit sci_init_gpios(struct sci_port *port) | |
1134 | { | |
1135 | struct uart_port *up = &port->port; | |
1136 | int i; | |
1137 | ||
1138 | if (!port->cfg) | |
1139 | return; | |
1140 | ||
1141 | for (i = 0; i < SCIx_NR_FNS; i++) { | |
1142 | const char *desc; | |
1143 | int ret; | |
1144 | ||
1145 | if (!port->cfg->gpios[i]) | |
1146 | continue; | |
1147 | ||
1148 | desc = sci_gpio_str(i); | |
1149 | ||
1150 | port->gpiostr[i] = kasprintf(GFP_KERNEL, "%s:%s", | |
1151 | dev_name(up->dev), desc); | |
1152 | ||
1153 | /* | |
1154 | * If we've failed the allocation, we can still continue | |
1155 | * on with a NULL string. | |
1156 | */ | |
1157 | if (!port->gpiostr[i]) | |
1158 | dev_notice(up->dev, "%s string allocation failure\n", | |
1159 | desc); | |
1160 | ||
1161 | ret = gpio_request(port->cfg->gpios[i], port->gpiostr[i]); | |
1162 | if (unlikely(ret != 0)) { | |
1163 | dev_notice(up->dev, "failed %s gpio request\n", desc); | |
1164 | ||
1165 | /* | |
1166 | * If we can't get the GPIO for whatever reason, | |
1167 | * no point in keeping the verbose string around. | |
1168 | */ | |
1169 | kfree(port->gpiostr[i]); | |
1170 | } | |
1171 | } | |
1172 | } | |
1173 | ||
1174 | static void sci_free_gpios(struct sci_port *port) | |
1175 | { | |
1176 | int i; | |
1177 | ||
1178 | for (i = 0; i < SCIx_NR_FNS; i++) | |
1179 | if (port->cfg->gpios[i]) { | |
1180 | gpio_free(port->cfg->gpios[i]); | |
1181 | kfree(port->gpiostr[i]); | |
1182 | } | |
1183 | } | |
1184 | ||
1da177e4 LT |
1185 | static unsigned int sci_tx_empty(struct uart_port *port) |
1186 | { | |
b12bb29f | 1187 | unsigned short status = serial_port_in(port, SCxSR); |
72b294cf | 1188 | unsigned short in_tx_fifo = sci_txfill(port); |
73a19e4c GL |
1189 | |
1190 | return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; | |
1da177e4 LT |
1191 | } |
1192 | ||
cdf7c42f PM |
1193 | /* |
1194 | * Modem control is a bit of a mixed bag for SCI(F) ports. Generally | |
1195 | * CTS/RTS is supported in hardware by at least one port and controlled | |
1196 | * via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently | |
1197 | * handled via the ->init_pins() op, which is a bit of a one-way street, | |
1198 | * lacking any ability to defer pin control -- this will later be | |
1199 | * converted over to the GPIO framework). | |
dc7e3ef7 PM |
1200 | * |
1201 | * Other modes (such as loopback) are supported generically on certain | |
1202 | * port types, but not others. For these it's sufficient to test for the | |
1203 | * existence of the support register and simply ignore the port type. | |
cdf7c42f | 1204 | */ |
1da177e4 LT |
1205 | static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) |
1206 | { | |
dc7e3ef7 PM |
1207 | if (mctrl & TIOCM_LOOP) { |
1208 | struct plat_sci_reg *reg; | |
1209 | ||
1210 | /* | |
1211 | * Standard loopback mode for SCFCR ports. | |
1212 | */ | |
1213 | reg = sci_getreg(port, SCFCR); | |
1214 | if (reg->size) | |
b12bb29f | 1215 | serial_port_out(port, SCFCR, serial_port_in(port, SCFCR) | 1); |
dc7e3ef7 | 1216 | } |
1da177e4 LT |
1217 | } |
1218 | ||
1219 | static unsigned int sci_get_mctrl(struct uart_port *port) | |
1220 | { | |
cdf7c42f PM |
1221 | /* |
1222 | * CTS/RTS is handled in hardware when supported, while nothing | |
1223 | * else is wired up. Keep it simple and simply assert DSR/CAR. | |
1224 | */ | |
1225 | return TIOCM_DSR | TIOCM_CAR; | |
1da177e4 LT |
1226 | } |
1227 | ||
73a19e4c GL |
1228 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
1229 | static void sci_dma_tx_complete(void *arg) | |
1230 | { | |
1231 | struct sci_port *s = arg; | |
1232 | struct uart_port *port = &s->port; | |
1233 | struct circ_buf *xmit = &port->state->xmit; | |
1234 | unsigned long flags; | |
1235 | ||
1236 | dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); | |
1237 | ||
1238 | spin_lock_irqsave(&port->lock, flags); | |
1239 | ||
f354a381 | 1240 | xmit->tail += sg_dma_len(&s->sg_tx); |
73a19e4c GL |
1241 | xmit->tail &= UART_XMIT_SIZE - 1; |
1242 | ||
f354a381 | 1243 | port->icount.tx += sg_dma_len(&s->sg_tx); |
73a19e4c GL |
1244 | |
1245 | async_tx_ack(s->desc_tx); | |
73a19e4c GL |
1246 | s->desc_tx = NULL; |
1247 | ||
73a19e4c GL |
1248 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
1249 | uart_write_wakeup(port); | |
1250 | ||
3089f381 | 1251 | if (!uart_circ_empty(xmit)) { |
49d4bcad | 1252 | s->cookie_tx = 0; |
73a19e4c | 1253 | schedule_work(&s->work_tx); |
49d4bcad YT |
1254 | } else { |
1255 | s->cookie_tx = -EINVAL; | |
1256 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { | |
b12bb29f PM |
1257 | u16 ctrl = serial_port_in(port, SCSCR); |
1258 | serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE); | |
49d4bcad | 1259 | } |
3089f381 GL |
1260 | } |
1261 | ||
1262 | spin_unlock_irqrestore(&port->lock, flags); | |
73a19e4c GL |
1263 | } |
1264 | ||
1265 | /* Locking: called with port lock held */ | |
1266 | static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty, | |
1267 | size_t count) | |
1268 | { | |
1269 | struct uart_port *port = &s->port; | |
1270 | int i, active, room; | |
1271 | ||
1272 | room = tty_buffer_request_room(tty, count); | |
1273 | ||
1274 | if (s->active_rx == s->cookie_rx[0]) { | |
1275 | active = 0; | |
1276 | } else if (s->active_rx == s->cookie_rx[1]) { | |
1277 | active = 1; | |
1278 | } else { | |
1279 | dev_err(port->dev, "cookie %d not found!\n", s->active_rx); | |
1280 | return 0; | |
1281 | } | |
1282 | ||
1283 | if (room < count) | |
1284 | dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", | |
1285 | count - room); | |
1286 | if (!room) | |
1287 | return room; | |
1288 | ||
1289 | for (i = 0; i < room; i++) | |
1290 | tty_insert_flip_char(tty, ((u8 *)sg_virt(&s->sg_rx[active]))[i], | |
1291 | TTY_NORMAL); | |
1292 | ||
1293 | port->icount.rx += room; | |
1294 | ||
1295 | return room; | |
1296 | } | |
1297 | ||
1298 | static void sci_dma_rx_complete(void *arg) | |
1299 | { | |
1300 | struct sci_port *s = arg; | |
1301 | struct uart_port *port = &s->port; | |
1302 | struct tty_struct *tty = port->state->port.tty; | |
1303 | unsigned long flags; | |
1304 | int count; | |
1305 | ||
3089f381 | 1306 | dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx); |
73a19e4c GL |
1307 | |
1308 | spin_lock_irqsave(&port->lock, flags); | |
1309 | ||
1310 | count = sci_dma_rx_push(s, tty, s->buf_len_rx); | |
1311 | ||
3089f381 | 1312 | mod_timer(&s->rx_timer, jiffies + s->rx_timeout); |
73a19e4c GL |
1313 | |
1314 | spin_unlock_irqrestore(&port->lock, flags); | |
1315 | ||
1316 | if (count) | |
1317 | tty_flip_buffer_push(tty); | |
1318 | ||
1319 | schedule_work(&s->work_rx); | |
1320 | } | |
1321 | ||
73a19e4c GL |
1322 | static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) |
1323 | { | |
1324 | struct dma_chan *chan = s->chan_rx; | |
1325 | struct uart_port *port = &s->port; | |
73a19e4c GL |
1326 | |
1327 | s->chan_rx = NULL; | |
1328 | s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; | |
1329 | dma_release_channel(chan); | |
85b8e3ff GL |
1330 | if (sg_dma_address(&s->sg_rx[0])) |
1331 | dma_free_coherent(port->dev, s->buf_len_rx * 2, | |
1332 | sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0])); | |
73a19e4c GL |
1333 | if (enable_pio) |
1334 | sci_start_rx(port); | |
1335 | } | |
1336 | ||
1337 | static void sci_tx_dma_release(struct sci_port *s, bool enable_pio) | |
1338 | { | |
1339 | struct dma_chan *chan = s->chan_tx; | |
1340 | struct uart_port *port = &s->port; | |
73a19e4c GL |
1341 | |
1342 | s->chan_tx = NULL; | |
1343 | s->cookie_tx = -EINVAL; | |
1344 | dma_release_channel(chan); | |
1345 | if (enable_pio) | |
1346 | sci_start_tx(port); | |
1347 | } | |
1348 | ||
1349 | static void sci_submit_rx(struct sci_port *s) | |
1350 | { | |
1351 | struct dma_chan *chan = s->chan_rx; | |
1352 | int i; | |
1353 | ||
1354 | for (i = 0; i < 2; i++) { | |
1355 | struct scatterlist *sg = &s->sg_rx[i]; | |
1356 | struct dma_async_tx_descriptor *desc; | |
1357 | ||
16052827 | 1358 | desc = dmaengine_prep_slave_sg(chan, |
a485df4b | 1359 | sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); |
73a19e4c GL |
1360 | |
1361 | if (desc) { | |
1362 | s->desc_rx[i] = desc; | |
1363 | desc->callback = sci_dma_rx_complete; | |
1364 | desc->callback_param = s; | |
1365 | s->cookie_rx[i] = desc->tx_submit(desc); | |
1366 | } | |
1367 | ||
1368 | if (!desc || s->cookie_rx[i] < 0) { | |
1369 | if (i) { | |
1370 | async_tx_ack(s->desc_rx[0]); | |
1371 | s->cookie_rx[0] = -EINVAL; | |
1372 | } | |
1373 | if (desc) { | |
1374 | async_tx_ack(desc); | |
1375 | s->cookie_rx[i] = -EINVAL; | |
1376 | } | |
1377 | dev_warn(s->port.dev, | |
1378 | "failed to re-start DMA, using PIO\n"); | |
1379 | sci_rx_dma_release(s, true); | |
1380 | return; | |
1381 | } | |
3089f381 GL |
1382 | dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__, |
1383 | s->cookie_rx[i], i); | |
73a19e4c GL |
1384 | } |
1385 | ||
1386 | s->active_rx = s->cookie_rx[0]; | |
1387 | ||
1388 | dma_async_issue_pending(chan); | |
1389 | } | |
1390 | ||
1391 | static void work_fn_rx(struct work_struct *work) | |
1392 | { | |
1393 | struct sci_port *s = container_of(work, struct sci_port, work_rx); | |
1394 | struct uart_port *port = &s->port; | |
1395 | struct dma_async_tx_descriptor *desc; | |
1396 | int new; | |
1397 | ||
1398 | if (s->active_rx == s->cookie_rx[0]) { | |
1399 | new = 0; | |
1400 | } else if (s->active_rx == s->cookie_rx[1]) { | |
1401 | new = 1; | |
1402 | } else { | |
1403 | dev_err(port->dev, "cookie %d not found!\n", s->active_rx); | |
1404 | return; | |
1405 | } | |
1406 | desc = s->desc_rx[new]; | |
1407 | ||
1408 | if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) != | |
1409 | DMA_SUCCESS) { | |
1410 | /* Handle incomplete DMA receive */ | |
1411 | struct tty_struct *tty = port->state->port.tty; | |
1412 | struct dma_chan *chan = s->chan_rx; | |
1413 | struct sh_desc *sh_desc = container_of(desc, struct sh_desc, | |
1414 | async_tx); | |
1415 | unsigned long flags; | |
1416 | int count; | |
1417 | ||
05827630 | 1418 | chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); |
73a19e4c GL |
1419 | dev_dbg(port->dev, "Read %u bytes with cookie %d\n", |
1420 | sh_desc->partial, sh_desc->cookie); | |
1421 | ||
1422 | spin_lock_irqsave(&port->lock, flags); | |
1423 | count = sci_dma_rx_push(s, tty, sh_desc->partial); | |
1424 | spin_unlock_irqrestore(&port->lock, flags); | |
1425 | ||
1426 | if (count) | |
1427 | tty_flip_buffer_push(tty); | |
1428 | ||
1429 | sci_submit_rx(s); | |
1430 | ||
1431 | return; | |
1432 | } | |
1433 | ||
1434 | s->cookie_rx[new] = desc->tx_submit(desc); | |
1435 | if (s->cookie_rx[new] < 0) { | |
1436 | dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n"); | |
1437 | sci_rx_dma_release(s, true); | |
1438 | return; | |
1439 | } | |
1440 | ||
73a19e4c | 1441 | s->active_rx = s->cookie_rx[!new]; |
3089f381 GL |
1442 | |
1443 | dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__, | |
1444 | s->cookie_rx[new], new, s->active_rx); | |
73a19e4c GL |
1445 | } |
1446 | ||
1447 | static void work_fn_tx(struct work_struct *work) | |
1448 | { | |
1449 | struct sci_port *s = container_of(work, struct sci_port, work_tx); | |
1450 | struct dma_async_tx_descriptor *desc; | |
1451 | struct dma_chan *chan = s->chan_tx; | |
1452 | struct uart_port *port = &s->port; | |
1453 | struct circ_buf *xmit = &port->state->xmit; | |
1454 | struct scatterlist *sg = &s->sg_tx; | |
1455 | ||
1456 | /* | |
1457 | * DMA is idle now. | |
1458 | * Port xmit buffer is already mapped, and it is one page... Just adjust | |
1459 | * offsets and lengths. Since it is a circular buffer, we have to | |
1460 | * transmit till the end, and then the rest. Take the port lock to get a | |
1461 | * consistent xmit buffer state. | |
1462 | */ | |
1463 | spin_lock_irq(&port->lock); | |
1464 | sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); | |
f354a381 | 1465 | sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + |
73a19e4c | 1466 | sg->offset; |
f354a381 | 1467 | sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), |
73a19e4c | 1468 | CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); |
73a19e4c GL |
1469 | spin_unlock_irq(&port->lock); |
1470 | ||
f354a381 | 1471 | BUG_ON(!sg_dma_len(sg)); |
73a19e4c | 1472 | |
16052827 | 1473 | desc = dmaengine_prep_slave_sg(chan, |
a485df4b | 1474 | sg, s->sg_len_tx, DMA_MEM_TO_DEV, |
73a19e4c GL |
1475 | DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
1476 | if (!desc) { | |
1477 | /* switch to PIO */ | |
1478 | sci_tx_dma_release(s, true); | |
1479 | return; | |
1480 | } | |
1481 | ||
1482 | dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); | |
1483 | ||
1484 | spin_lock_irq(&port->lock); | |
1485 | s->desc_tx = desc; | |
1486 | desc->callback = sci_dma_tx_complete; | |
1487 | desc->callback_param = s; | |
1488 | spin_unlock_irq(&port->lock); | |
1489 | s->cookie_tx = desc->tx_submit(desc); | |
1490 | if (s->cookie_tx < 0) { | |
1491 | dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); | |
1492 | /* switch to PIO */ | |
1493 | sci_tx_dma_release(s, true); | |
1494 | return; | |
1495 | } | |
1496 | ||
1497 | dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__, | |
1498 | xmit->buf, xmit->tail, xmit->head, s->cookie_tx); | |
1499 | ||
1500 | dma_async_issue_pending(chan); | |
1501 | } | |
1502 | #endif | |
1503 | ||
b129a8cc | 1504 | static void sci_start_tx(struct uart_port *port) |
1da177e4 | 1505 | { |
3089f381 | 1506 | struct sci_port *s = to_sci_port(port); |
e108b2ca | 1507 | unsigned short ctrl; |
1da177e4 | 1508 | |
73a19e4c | 1509 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
d1d4b10c | 1510 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { |
b12bb29f | 1511 | u16 new, scr = serial_port_in(port, SCSCR); |
3089f381 GL |
1512 | if (s->chan_tx) |
1513 | new = scr | 0x8000; | |
1514 | else | |
1515 | new = scr & ~0x8000; | |
1516 | if (new != scr) | |
b12bb29f | 1517 | serial_port_out(port, SCSCR, new); |
73a19e4c | 1518 | } |
f43dc23d | 1519 | |
3089f381 | 1520 | if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && |
49d4bcad YT |
1521 | s->cookie_tx < 0) { |
1522 | s->cookie_tx = 0; | |
3089f381 | 1523 | schedule_work(&s->work_tx); |
49d4bcad | 1524 | } |
73a19e4c | 1525 | #endif |
f43dc23d | 1526 | |
d1d4b10c | 1527 | if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { |
3089f381 | 1528 | /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ |
b12bb29f PM |
1529 | ctrl = serial_port_in(port, SCSCR); |
1530 | serial_port_out(port, SCSCR, ctrl | SCSCR_TIE); | |
3089f381 | 1531 | } |
1da177e4 LT |
1532 | } |
1533 | ||
b129a8cc | 1534 | static void sci_stop_tx(struct uart_port *port) |
1da177e4 | 1535 | { |
1da177e4 LT |
1536 | unsigned short ctrl; |
1537 | ||
1538 | /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ | |
b12bb29f | 1539 | ctrl = serial_port_in(port, SCSCR); |
f43dc23d | 1540 | |
d1d4b10c | 1541 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) |
3089f381 | 1542 | ctrl &= ~0x8000; |
f43dc23d | 1543 | |
8e698614 | 1544 | ctrl &= ~SCSCR_TIE; |
f43dc23d | 1545 | |
b12bb29f | 1546 | serial_port_out(port, SCSCR, ctrl); |
1da177e4 LT |
1547 | } |
1548 | ||
73a19e4c | 1549 | static void sci_start_rx(struct uart_port *port) |
1da177e4 | 1550 | { |
1da177e4 LT |
1551 | unsigned short ctrl; |
1552 | ||
b12bb29f | 1553 | ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port); |
1da177e4 | 1554 | |
d1d4b10c | 1555 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) |
3089f381 | 1556 | ctrl &= ~0x4000; |
f43dc23d | 1557 | |
b12bb29f | 1558 | serial_port_out(port, SCSCR, ctrl); |
1da177e4 LT |
1559 | } |
1560 | ||
1561 | static void sci_stop_rx(struct uart_port *port) | |
1562 | { | |
1da177e4 LT |
1563 | unsigned short ctrl; |
1564 | ||
b12bb29f | 1565 | ctrl = serial_port_in(port, SCSCR); |
f43dc23d | 1566 | |
d1d4b10c | 1567 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) |
3089f381 | 1568 | ctrl &= ~0x4000; |
f43dc23d PM |
1569 | |
1570 | ctrl &= ~port_rx_irq_mask(port); | |
1571 | ||
b12bb29f | 1572 | serial_port_out(port, SCSCR, ctrl); |
1da177e4 LT |
1573 | } |
1574 | ||
1575 | static void sci_enable_ms(struct uart_port *port) | |
1576 | { | |
d39ec6ce PM |
1577 | /* |
1578 | * Not supported by hardware, always a nop. | |
1579 | */ | |
1da177e4 LT |
1580 | } |
1581 | ||
1582 | static void sci_break_ctl(struct uart_port *port, int break_state) | |
1583 | { | |
bbb4ce50 | 1584 | struct sci_port *s = to_sci_port(port); |
a4e02f6d | 1585 | struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; |
bbb4ce50 SY |
1586 | unsigned short scscr, scsptr; |
1587 | ||
a4e02f6d SY |
1588 | /* check wheter the port has SCSPTR */ |
1589 | if (!reg->size) { | |
bbb4ce50 SY |
1590 | /* |
1591 | * Not supported by hardware. Most parts couple break and rx | |
1592 | * interrupts together, with break detection always enabled. | |
1593 | */ | |
a4e02f6d | 1594 | return; |
bbb4ce50 | 1595 | } |
a4e02f6d SY |
1596 | |
1597 | scsptr = serial_port_in(port, SCSPTR); | |
1598 | scscr = serial_port_in(port, SCSCR); | |
1599 | ||
1600 | if (break_state == -1) { | |
1601 | scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT; | |
1602 | scscr &= ~SCSCR_TE; | |
1603 | } else { | |
1604 | scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO; | |
1605 | scscr |= SCSCR_TE; | |
1606 | } | |
1607 | ||
1608 | serial_port_out(port, SCSPTR, scsptr); | |
1609 | serial_port_out(port, SCSCR, scscr); | |
1da177e4 LT |
1610 | } |
1611 | ||
73a19e4c GL |
1612 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
1613 | static bool filter(struct dma_chan *chan, void *slave) | |
1614 | { | |
1615 | struct sh_dmae_slave *param = slave; | |
1616 | ||
1617 | dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__, | |
1618 | param->slave_id); | |
1619 | ||
937bb6e4 GL |
1620 | chan->private = param; |
1621 | return true; | |
73a19e4c GL |
1622 | } |
1623 | ||
1624 | static void rx_timer_fn(unsigned long arg) | |
1625 | { | |
1626 | struct sci_port *s = (struct sci_port *)arg; | |
1627 | struct uart_port *port = &s->port; | |
b12bb29f | 1628 | u16 scr = serial_port_in(port, SCSCR); |
3089f381 | 1629 | |
d1d4b10c | 1630 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { |
3089f381 | 1631 | scr &= ~0x4000; |
ce6738b6 | 1632 | enable_irq(s->cfg->irqs[1]); |
3089f381 | 1633 | } |
b12bb29f | 1634 | serial_port_out(port, SCSCR, scr | SCSCR_RIE); |
73a19e4c GL |
1635 | dev_dbg(port->dev, "DMA Rx timed out\n"); |
1636 | schedule_work(&s->work_rx); | |
1637 | } | |
1638 | ||
1639 | static void sci_request_dma(struct uart_port *port) | |
1640 | { | |
1641 | struct sci_port *s = to_sci_port(port); | |
1642 | struct sh_dmae_slave *param; | |
1643 | struct dma_chan *chan; | |
1644 | dma_cap_mask_t mask; | |
1645 | int nent; | |
1646 | ||
937bb6e4 GL |
1647 | dev_dbg(port->dev, "%s: port %d\n", __func__, |
1648 | port->line); | |
73a19e4c | 1649 | |
937bb6e4 | 1650 | if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0) |
73a19e4c GL |
1651 | return; |
1652 | ||
1653 | dma_cap_zero(mask); | |
1654 | dma_cap_set(DMA_SLAVE, mask); | |
1655 | ||
1656 | param = &s->param_tx; | |
1657 | ||
1658 | /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */ | |
ce6738b6 | 1659 | param->slave_id = s->cfg->dma_slave_tx; |
73a19e4c GL |
1660 | |
1661 | s->cookie_tx = -EINVAL; | |
1662 | chan = dma_request_channel(mask, filter, param); | |
1663 | dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan); | |
1664 | if (chan) { | |
1665 | s->chan_tx = chan; | |
1666 | sg_init_table(&s->sg_tx, 1); | |
1667 | /* UART circular tx buffer is an aligned page. */ | |
1668 | BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK); | |
1669 | sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf), | |
1670 | UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK); | |
1671 | nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE); | |
1672 | if (!nent) | |
1673 | sci_tx_dma_release(s, false); | |
1674 | else | |
1675 | dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__, | |
1676 | sg_dma_len(&s->sg_tx), | |
1677 | port->state->xmit.buf, sg_dma_address(&s->sg_tx)); | |
1678 | ||
1679 | s->sg_len_tx = nent; | |
1680 | ||
1681 | INIT_WORK(&s->work_tx, work_fn_tx); | |
1682 | } | |
1683 | ||
1684 | param = &s->param_rx; | |
1685 | ||
1686 | /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */ | |
ce6738b6 | 1687 | param->slave_id = s->cfg->dma_slave_rx; |
73a19e4c GL |
1688 | |
1689 | chan = dma_request_channel(mask, filter, param); | |
1690 | dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); | |
1691 | if (chan) { | |
1692 | dma_addr_t dma[2]; | |
1693 | void *buf[2]; | |
1694 | int i; | |
1695 | ||
1696 | s->chan_rx = chan; | |
1697 | ||
1698 | s->buf_len_rx = 2 * max(16, (int)port->fifosize); | |
1699 | buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2, | |
1700 | &dma[0], GFP_KERNEL); | |
1701 | ||
1702 | if (!buf[0]) { | |
1703 | dev_warn(port->dev, | |
1704 | "failed to allocate dma buffer, using PIO\n"); | |
1705 | sci_rx_dma_release(s, true); | |
1706 | return; | |
1707 | } | |
1708 | ||
1709 | buf[1] = buf[0] + s->buf_len_rx; | |
1710 | dma[1] = dma[0] + s->buf_len_rx; | |
1711 | ||
1712 | for (i = 0; i < 2; i++) { | |
1713 | struct scatterlist *sg = &s->sg_rx[i]; | |
1714 | ||
1715 | sg_init_table(sg, 1); | |
1716 | sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx, | |
1717 | (int)buf[i] & ~PAGE_MASK); | |
f354a381 | 1718 | sg_dma_address(sg) = dma[i]; |
73a19e4c GL |
1719 | } |
1720 | ||
1721 | INIT_WORK(&s->work_rx, work_fn_rx); | |
1722 | setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s); | |
1723 | ||
1724 | sci_submit_rx(s); | |
1725 | } | |
1726 | } | |
1727 | ||
1728 | static void sci_free_dma(struct uart_port *port) | |
1729 | { | |
1730 | struct sci_port *s = to_sci_port(port); | |
1731 | ||
73a19e4c GL |
1732 | if (s->chan_tx) |
1733 | sci_tx_dma_release(s, false); | |
1734 | if (s->chan_rx) | |
1735 | sci_rx_dma_release(s, false); | |
1736 | } | |
27bd1075 PM |
1737 | #else |
1738 | static inline void sci_request_dma(struct uart_port *port) | |
1739 | { | |
1740 | } | |
1741 | ||
1742 | static inline void sci_free_dma(struct uart_port *port) | |
1743 | { | |
1744 | } | |
73a19e4c GL |
1745 | #endif |
1746 | ||
1da177e4 LT |
1747 | static int sci_startup(struct uart_port *port) |
1748 | { | |
a5660ada | 1749 | struct sci_port *s = to_sci_port(port); |
073e84c9 | 1750 | int ret; |
1da177e4 | 1751 | |
73a19e4c GL |
1752 | dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); |
1753 | ||
048be431 RW |
1754 | pm_runtime_put_noidle(port->dev); |
1755 | ||
23241d43 | 1756 | sci_port_enable(s); |
1da177e4 | 1757 | |
073e84c9 PM |
1758 | ret = sci_request_irq(s); |
1759 | if (unlikely(ret < 0)) | |
1760 | return ret; | |
1761 | ||
73a19e4c | 1762 | sci_request_dma(port); |
073e84c9 | 1763 | |
d656901b | 1764 | sci_start_tx(port); |
73a19e4c | 1765 | sci_start_rx(port); |
1da177e4 LT |
1766 | |
1767 | return 0; | |
1768 | } | |
1769 | ||
1770 | static void sci_shutdown(struct uart_port *port) | |
1771 | { | |
a5660ada | 1772 | struct sci_port *s = to_sci_port(port); |
1da177e4 | 1773 | |
73a19e4c GL |
1774 | dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); |
1775 | ||
1da177e4 | 1776 | sci_stop_rx(port); |
b129a8cc | 1777 | sci_stop_tx(port); |
073e84c9 | 1778 | |
73a19e4c | 1779 | sci_free_dma(port); |
1da177e4 LT |
1780 | sci_free_irq(s); |
1781 | ||
23241d43 | 1782 | sci_port_disable(s); |
048be431 RW |
1783 | |
1784 | pm_runtime_get_noresume(port->dev); | |
1da177e4 LT |
1785 | } |
1786 | ||
26c92f37 PM |
1787 | static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, |
1788 | unsigned long freq) | |
1789 | { | |
1790 | switch (algo_id) { | |
1791 | case SCBRR_ALGO_1: | |
1792 | return ((freq + 16 * bps) / (16 * bps) - 1); | |
1793 | case SCBRR_ALGO_2: | |
1794 | return ((freq + 16 * bps) / (32 * bps) - 1); | |
1795 | case SCBRR_ALGO_3: | |
1796 | return (((freq * 2) + 16 * bps) / (16 * bps) - 1); | |
1797 | case SCBRR_ALGO_4: | |
1798 | return (((freq * 2) + 16 * bps) / (32 * bps) - 1); | |
1799 | case SCBRR_ALGO_5: | |
1800 | return (((freq * 1000 / 32) / bps) - 1); | |
1801 | } | |
1802 | ||
1803 | /* Warn, but use a safe default */ | |
1804 | WARN_ON(1); | |
e8183a6c | 1805 | |
26c92f37 PM |
1806 | return ((freq + 16 * bps) / (32 * bps) - 1); |
1807 | } | |
1808 | ||
1ba76220 MD |
1809 | static void sci_reset(struct uart_port *port) |
1810 | { | |
0979e0e6 | 1811 | struct plat_sci_reg *reg; |
1ba76220 MD |
1812 | unsigned int status; |
1813 | ||
1814 | do { | |
b12bb29f | 1815 | status = serial_port_in(port, SCxSR); |
1ba76220 MD |
1816 | } while (!(status & SCxSR_TEND(port))); |
1817 | ||
b12bb29f | 1818 | serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ |
1ba76220 | 1819 | |
0979e0e6 PM |
1820 | reg = sci_getreg(port, SCFCR); |
1821 | if (reg->size) | |
b12bb29f | 1822 | serial_port_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); |
1ba76220 MD |
1823 | } |
1824 | ||
606d099c AC |
1825 | static void sci_set_termios(struct uart_port *port, struct ktermios *termios, |
1826 | struct ktermios *old) | |
1da177e4 | 1827 | { |
00b9de9c | 1828 | struct sci_port *s = to_sci_port(port); |
0979e0e6 | 1829 | struct plat_sci_reg *reg; |
1ba76220 | 1830 | unsigned int baud, smr_val, max_baud; |
a2159b52 | 1831 | int t = -1; |
1da177e4 | 1832 | |
154280fd MD |
1833 | /* |
1834 | * earlyprintk comes here early on with port->uartclk set to zero. | |
1835 | * the clock framework is not up and running at this point so here | |
1836 | * we assume that 115200 is the maximum baud rate. please note that | |
1837 | * the baud rate is not programmed during earlyprintk - it is assumed | |
1838 | * that the previous boot loader has enabled required clocks and | |
1839 | * setup the baud rate generator hardware for us already. | |
1840 | */ | |
1841 | max_baud = port->uartclk ? port->uartclk / 16 : 115200; | |
1da177e4 | 1842 | |
154280fd MD |
1843 | baud = uart_get_baud_rate(port, termios, old, 0, max_baud); |
1844 | if (likely(baud && port->uartclk)) | |
ce6738b6 | 1845 | t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, port->uartclk); |
e108b2ca | 1846 | |
23241d43 | 1847 | sci_port_enable(s); |
36003386 | 1848 | |
1ba76220 | 1849 | sci_reset(port); |
1da177e4 | 1850 | |
b12bb29f | 1851 | smr_val = serial_port_in(port, SCSMR) & 3; |
e8183a6c | 1852 | |
1da177e4 LT |
1853 | if ((termios->c_cflag & CSIZE) == CS7) |
1854 | smr_val |= 0x40; | |
1855 | if (termios->c_cflag & PARENB) | |
1856 | smr_val |= 0x20; | |
1857 | if (termios->c_cflag & PARODD) | |
1858 | smr_val |= 0x30; | |
1859 | if (termios->c_cflag & CSTOPB) | |
1860 | smr_val |= 0x08; | |
1861 | ||
1862 | uart_update_timeout(port, termios->c_cflag, baud); | |
1863 | ||
b12bb29f | 1864 | serial_port_out(port, SCSMR, smr_val); |
1da177e4 | 1865 | |
73a19e4c | 1866 | dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t, |
ce6738b6 | 1867 | s->cfg->scscr); |
73a19e4c | 1868 | |
1da177e4 | 1869 | if (t > 0) { |
e7c98dc7 | 1870 | if (t >= 256) { |
b12bb29f | 1871 | serial_port_out(port, SCSMR, (serial_port_in(port, SCSMR) & ~3) | 1); |
1da177e4 | 1872 | t >>= 2; |
e7c98dc7 | 1873 | } else |
b12bb29f | 1874 | serial_port_out(port, SCSMR, serial_port_in(port, SCSMR) & ~3); |
e7c98dc7 | 1875 | |
b12bb29f | 1876 | serial_port_out(port, SCBRR, t); |
1da177e4 LT |
1877 | udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ |
1878 | } | |
1879 | ||
d5701647 | 1880 | sci_init_pins(port, termios->c_cflag); |
0979e0e6 | 1881 | |
73c3d53f PM |
1882 | reg = sci_getreg(port, SCFCR); |
1883 | if (reg->size) { | |
b12bb29f | 1884 | unsigned short ctrl = serial_port_in(port, SCFCR); |
0979e0e6 | 1885 | |
73c3d53f | 1886 | if (s->cfg->capabilities & SCIx_HAVE_RTSCTS) { |
faf02f8f PM |
1887 | if (termios->c_cflag & CRTSCTS) |
1888 | ctrl |= SCFCR_MCE; | |
1889 | else | |
1890 | ctrl &= ~SCFCR_MCE; | |
faf02f8f | 1891 | } |
73c3d53f PM |
1892 | |
1893 | /* | |
1894 | * As we've done a sci_reset() above, ensure we don't | |
1895 | * interfere with the FIFOs while toggling MCE. As the | |
1896 | * reset values could still be set, simply mask them out. | |
1897 | */ | |
1898 | ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST); | |
1899 | ||
b12bb29f | 1900 | serial_port_out(port, SCFCR, ctrl); |
0979e0e6 | 1901 | } |
b7a76e4b | 1902 | |
b12bb29f | 1903 | serial_port_out(port, SCSCR, s->cfg->scscr); |
1da177e4 | 1904 | |
3089f381 GL |
1905 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
1906 | /* | |
1907 | * Calculate delay for 1.5 DMA buffers: see | |
1908 | * drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits | |
1909 | * (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function | |
1910 | * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)." | |
1911 | * Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO | |
1912 | * sizes), but it has been found out experimentally, that this is not | |
1913 | * enough: the driver too often needlessly runs on a DMA timeout. 20ms | |
1914 | * as a minimum seem to work perfectly. | |
1915 | */ | |
1916 | if (s->chan_rx) { | |
1917 | s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / | |
1918 | port->fifosize / 2; | |
1919 | dev_dbg(port->dev, | |
1920 | "DMA Rx t-out %ums, tty t-out %u jiffies\n", | |
1921 | s->rx_timeout * 1000 / HZ, port->timeout); | |
1922 | if (s->rx_timeout < msecs_to_jiffies(20)) | |
1923 | s->rx_timeout = msecs_to_jiffies(20); | |
1924 | } | |
1925 | #endif | |
1926 | ||
1da177e4 | 1927 | if ((termios->c_cflag & CREAD) != 0) |
73a19e4c | 1928 | sci_start_rx(port); |
36003386 | 1929 | |
23241d43 | 1930 | sci_port_disable(s); |
1da177e4 LT |
1931 | } |
1932 | ||
1933 | static const char *sci_type(struct uart_port *port) | |
1934 | { | |
1935 | switch (port->type) { | |
e7c98dc7 MT |
1936 | case PORT_IRDA: |
1937 | return "irda"; | |
1938 | case PORT_SCI: | |
1939 | return "sci"; | |
1940 | case PORT_SCIF: | |
1941 | return "scif"; | |
1942 | case PORT_SCIFA: | |
1943 | return "scifa"; | |
d1d4b10c GL |
1944 | case PORT_SCIFB: |
1945 | return "scifb"; | |
1da177e4 LT |
1946 | } |
1947 | ||
fa43972f | 1948 | return NULL; |
1da177e4 LT |
1949 | } |
1950 | ||
e2651647 | 1951 | static inline unsigned long sci_port_size(struct uart_port *port) |
1da177e4 | 1952 | { |
e2651647 PM |
1953 | /* |
1954 | * Pick an arbitrary size that encapsulates all of the base | |
1955 | * registers by default. This can be optimized later, or derived | |
1956 | * from platform resource data at such a time that ports begin to | |
1957 | * behave more erratically. | |
1958 | */ | |
1959 | return 64; | |
1da177e4 LT |
1960 | } |
1961 | ||
f6e9495d PM |
1962 | static int sci_remap_port(struct uart_port *port) |
1963 | { | |
1964 | unsigned long size = sci_port_size(port); | |
1965 | ||
1966 | /* | |
1967 | * Nothing to do if there's already an established membase. | |
1968 | */ | |
1969 | if (port->membase) | |
1970 | return 0; | |
1971 | ||
1972 | if (port->flags & UPF_IOREMAP) { | |
1973 | port->membase = ioremap_nocache(port->mapbase, size); | |
1974 | if (unlikely(!port->membase)) { | |
1975 | dev_err(port->dev, "can't remap port#%d\n", port->line); | |
1976 | return -ENXIO; | |
1977 | } | |
1978 | } else { | |
1979 | /* | |
1980 | * For the simple (and majority of) cases where we don't | |
1981 | * need to do any remapping, just cast the cookie | |
1982 | * directly. | |
1983 | */ | |
1984 | port->membase = (void __iomem *)port->mapbase; | |
1985 | } | |
1986 | ||
1987 | return 0; | |
1988 | } | |
1989 | ||
e2651647 | 1990 | static void sci_release_port(struct uart_port *port) |
1da177e4 | 1991 | { |
e2651647 PM |
1992 | if (port->flags & UPF_IOREMAP) { |
1993 | iounmap(port->membase); | |
1994 | port->membase = NULL; | |
1995 | } | |
1996 | ||
1997 | release_mem_region(port->mapbase, sci_port_size(port)); | |
1da177e4 LT |
1998 | } |
1999 | ||
e2651647 | 2000 | static int sci_request_port(struct uart_port *port) |
1da177e4 | 2001 | { |
e2651647 PM |
2002 | unsigned long size = sci_port_size(port); |
2003 | struct resource *res; | |
f6e9495d | 2004 | int ret; |
1da177e4 | 2005 | |
1020520e | 2006 | res = request_mem_region(port->mapbase, size, dev_name(port->dev)); |
e2651647 PM |
2007 | if (unlikely(res == NULL)) |
2008 | return -EBUSY; | |
1da177e4 | 2009 | |
f6e9495d PM |
2010 | ret = sci_remap_port(port); |
2011 | if (unlikely(ret != 0)) { | |
2012 | release_resource(res); | |
2013 | return ret; | |
7ff731ae | 2014 | } |
e2651647 PM |
2015 | |
2016 | return 0; | |
2017 | } | |
2018 | ||
2019 | static void sci_config_port(struct uart_port *port, int flags) | |
2020 | { | |
2021 | if (flags & UART_CONFIG_TYPE) { | |
2022 | struct sci_port *sport = to_sci_port(port); | |
2023 | ||
2024 | port->type = sport->cfg->type; | |
2025 | sci_request_port(port); | |
2026 | } | |
1da177e4 LT |
2027 | } |
2028 | ||
2029 | static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) | |
2030 | { | |
a5660ada | 2031 | struct sci_port *s = to_sci_port(port); |
1da177e4 | 2032 | |
ce6738b6 | 2033 | if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs) |
1da177e4 LT |
2034 | return -EINVAL; |
2035 | if (ser->baud_base < 2400) | |
2036 | /* No paper tape reader for Mitch.. */ | |
2037 | return -EINVAL; | |
2038 | ||
2039 | return 0; | |
2040 | } | |
2041 | ||
2042 | static struct uart_ops sci_uart_ops = { | |
2043 | .tx_empty = sci_tx_empty, | |
2044 | .set_mctrl = sci_set_mctrl, | |
2045 | .get_mctrl = sci_get_mctrl, | |
2046 | .start_tx = sci_start_tx, | |
2047 | .stop_tx = sci_stop_tx, | |
2048 | .stop_rx = sci_stop_rx, | |
2049 | .enable_ms = sci_enable_ms, | |
2050 | .break_ctl = sci_break_ctl, | |
2051 | .startup = sci_startup, | |
2052 | .shutdown = sci_shutdown, | |
2053 | .set_termios = sci_set_termios, | |
2054 | .type = sci_type, | |
2055 | .release_port = sci_release_port, | |
2056 | .request_port = sci_request_port, | |
2057 | .config_port = sci_config_port, | |
2058 | .verify_port = sci_verify_port, | |
07d2a1a1 PM |
2059 | #ifdef CONFIG_CONSOLE_POLL |
2060 | .poll_get_char = sci_poll_get_char, | |
2061 | .poll_put_char = sci_poll_put_char, | |
2062 | #endif | |
1da177e4 LT |
2063 | }; |
2064 | ||
c7ed1ab3 PM |
2065 | static int __devinit sci_init_single(struct platform_device *dev, |
2066 | struct sci_port *sci_port, | |
2067 | unsigned int index, | |
2068 | struct plat_sci_port *p) | |
e108b2ca | 2069 | { |
73a19e4c | 2070 | struct uart_port *port = &sci_port->port; |
3127c6b2 | 2071 | int ret; |
e108b2ca | 2072 | |
50f0959a PM |
2073 | sci_port->cfg = p; |
2074 | ||
73a19e4c GL |
2075 | port->ops = &sci_uart_ops; |
2076 | port->iotype = UPIO_MEM; | |
2077 | port->line = index; | |
75136d48 MP |
2078 | |
2079 | switch (p->type) { | |
d1d4b10c GL |
2080 | case PORT_SCIFB: |
2081 | port->fifosize = 256; | |
2082 | break; | |
75136d48 | 2083 | case PORT_SCIFA: |
73a19e4c | 2084 | port->fifosize = 64; |
75136d48 MP |
2085 | break; |
2086 | case PORT_SCIF: | |
73a19e4c | 2087 | port->fifosize = 16; |
75136d48 MP |
2088 | break; |
2089 | default: | |
73a19e4c | 2090 | port->fifosize = 1; |
75136d48 MP |
2091 | break; |
2092 | } | |
7b6fd3bf | 2093 | |
3127c6b2 PM |
2094 | if (p->regtype == SCIx_PROBE_REGTYPE) { |
2095 | ret = sci_probe_regmap(p); | |
fc97114b | 2096 | if (unlikely(ret)) |
3127c6b2 PM |
2097 | return ret; |
2098 | } | |
61a6976b | 2099 | |
7b6fd3bf | 2100 | if (dev) { |
c7ed1ab3 PM |
2101 | sci_port->iclk = clk_get(&dev->dev, "sci_ick"); |
2102 | if (IS_ERR(sci_port->iclk)) { | |
2103 | sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); | |
2104 | if (IS_ERR(sci_port->iclk)) { | |
2105 | dev_err(&dev->dev, "can't get iclk\n"); | |
2106 | return PTR_ERR(sci_port->iclk); | |
2107 | } | |
2108 | } | |
2109 | ||
2110 | /* | |
2111 | * The function clock is optional, ignore it if we can't | |
2112 | * find it. | |
2113 | */ | |
2114 | sci_port->fclk = clk_get(&dev->dev, "sci_fck"); | |
2115 | if (IS_ERR(sci_port->fclk)) | |
2116 | sci_port->fclk = NULL; | |
2117 | ||
73a19e4c | 2118 | port->dev = &dev->dev; |
5e50d2d6 | 2119 | |
50f0959a PM |
2120 | sci_init_gpios(sci_port); |
2121 | ||
5a50a01b | 2122 | pm_runtime_irq_safe(&dev->dev); |
048be431 | 2123 | pm_runtime_get_noresume(&dev->dev); |
5e50d2d6 | 2124 | pm_runtime_enable(&dev->dev); |
7b6fd3bf | 2125 | } |
e108b2ca | 2126 | |
7ed7e071 MD |
2127 | sci_port->break_timer.data = (unsigned long)sci_port; |
2128 | sci_port->break_timer.function = sci_break_timer; | |
2129 | init_timer(&sci_port->break_timer); | |
2130 | ||
debf9507 PM |
2131 | /* |
2132 | * Establish some sensible defaults for the error detection. | |
2133 | */ | |
2134 | if (!p->error_mask) | |
2135 | p->error_mask = (p->type == PORT_SCI) ? | |
2136 | SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK; | |
2137 | ||
2138 | /* | |
2139 | * Establish sensible defaults for the overrun detection, unless | |
2140 | * the part has explicitly disabled support for it. | |
2141 | */ | |
2142 | if (p->overrun_bit != SCIx_NOT_SUPPORTED) { | |
2143 | if (p->type == PORT_SCI) | |
2144 | p->overrun_bit = 5; | |
2145 | else if (p->scbrr_algo_id == SCBRR_ALGO_4) | |
2146 | p->overrun_bit = 9; | |
2147 | else | |
2148 | p->overrun_bit = 0; | |
2149 | ||
2150 | /* | |
2151 | * Make the error mask inclusive of overrun detection, if | |
2152 | * supported. | |
2153 | */ | |
2154 | p->error_mask |= (1 << p->overrun_bit); | |
2155 | } | |
2156 | ||
ce6738b6 PM |
2157 | port->mapbase = p->mapbase; |
2158 | port->type = p->type; | |
f43dc23d | 2159 | port->flags = p->flags; |
61a6976b | 2160 | port->regshift = p->regshift; |
73a19e4c | 2161 | |
ce6738b6 | 2162 | /* |
61a6976b | 2163 | * The UART port needs an IRQ value, so we peg this to the RX IRQ |
ce6738b6 PM |
2164 | * for the multi-IRQ ports, which is where we are primarily |
2165 | * concerned with the shutdown path synchronization. | |
2166 | * | |
2167 | * For the muxed case there's nothing more to do. | |
2168 | */ | |
54aa89ea | 2169 | port->irq = p->irqs[SCIx_RXI_IRQ]; |
9cfb5c05 | 2170 | port->irqflags = 0; |
73a19e4c | 2171 | |
61a6976b PM |
2172 | port->serial_in = sci_serial_in; |
2173 | port->serial_out = sci_serial_out; | |
2174 | ||
937bb6e4 GL |
2175 | if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) |
2176 | dev_dbg(port->dev, "DMA tx %d, rx %d\n", | |
2177 | p->dma_slave_tx, p->dma_slave_rx); | |
7ed7e071 | 2178 | |
c7ed1ab3 | 2179 | return 0; |
e108b2ca PM |
2180 | } |
2181 | ||
6dae1421 LP |
2182 | static void sci_cleanup_single(struct sci_port *port) |
2183 | { | |
2184 | sci_free_gpios(port); | |
2185 | ||
2186 | clk_put(port->iclk); | |
2187 | clk_put(port->fclk); | |
2188 | ||
2189 | pm_runtime_disable(port->port.dev); | |
2190 | } | |
2191 | ||
1da177e4 | 2192 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE |
dc8e6f5b MD |
2193 | static void serial_console_putchar(struct uart_port *port, int ch) |
2194 | { | |
2195 | sci_poll_put_char(port, ch); | |
2196 | } | |
2197 | ||
1da177e4 LT |
2198 | /* |
2199 | * Print a string to the serial port trying not to disturb | |
2200 | * any possible real use of the port... | |
2201 | */ | |
2202 | static void serial_console_write(struct console *co, const char *s, | |
2203 | unsigned count) | |
2204 | { | |
906b17dc PM |
2205 | struct sci_port *sci_port = &sci_ports[co->index]; |
2206 | struct uart_port *port = &sci_port->port; | |
973e5d52 | 2207 | unsigned short bits; |
07d2a1a1 | 2208 | |
23241d43 | 2209 | sci_port_enable(sci_port); |
501b825d MD |
2210 | |
2211 | uart_console_write(port, s, count, serial_console_putchar); | |
973e5d52 MD |
2212 | |
2213 | /* wait until fifo is empty and last bit has been transmitted */ | |
2214 | bits = SCxSR_TDxE(port) | SCxSR_TEND(port); | |
b12bb29f | 2215 | while ((serial_port_in(port, SCxSR) & bits) != bits) |
973e5d52 | 2216 | cpu_relax(); |
501b825d | 2217 | |
23241d43 | 2218 | sci_port_disable(sci_port); |
1da177e4 LT |
2219 | } |
2220 | ||
7b6fd3bf | 2221 | static int __devinit serial_console_setup(struct console *co, char *options) |
1da177e4 | 2222 | { |
dc8e6f5b | 2223 | struct sci_port *sci_port; |
1da177e4 LT |
2224 | struct uart_port *port; |
2225 | int baud = 115200; | |
2226 | int bits = 8; | |
2227 | int parity = 'n'; | |
2228 | int flow = 'n'; | |
2229 | int ret; | |
2230 | ||
e108b2ca | 2231 | /* |
906b17dc | 2232 | * Refuse to handle any bogus ports. |
1da177e4 | 2233 | */ |
906b17dc | 2234 | if (co->index < 0 || co->index >= SCI_NPORTS) |
e108b2ca | 2235 | return -ENODEV; |
e108b2ca | 2236 | |
906b17dc PM |
2237 | sci_port = &sci_ports[co->index]; |
2238 | port = &sci_port->port; | |
2239 | ||
b2267a6b AC |
2240 | /* |
2241 | * Refuse to handle uninitialized ports. | |
2242 | */ | |
2243 | if (!port->ops) | |
2244 | return -ENODEV; | |
2245 | ||
f6e9495d PM |
2246 | ret = sci_remap_port(port); |
2247 | if (unlikely(ret != 0)) | |
2248 | return ret; | |
e108b2ca | 2249 | |
23241d43 | 2250 | sci_port_enable(sci_port); |
b7a76e4b | 2251 | |
1da177e4 LT |
2252 | if (options) |
2253 | uart_parse_options(options, &baud, &parity, &bits, &flow); | |
2254 | ||
1ba76220 MD |
2255 | sci_port_disable(sci_port); |
2256 | ||
ab7cfb55 | 2257 | return uart_set_options(port, co, baud, parity, bits, flow); |
1da177e4 LT |
2258 | } |
2259 | ||
2260 | static struct console serial_console = { | |
2261 | .name = "ttySC", | |
906b17dc | 2262 | .device = uart_console_device, |
1da177e4 LT |
2263 | .write = serial_console_write, |
2264 | .setup = serial_console_setup, | |
fa5da2f7 | 2265 | .flags = CON_PRINTBUFFER, |
1da177e4 | 2266 | .index = -1, |
906b17dc | 2267 | .data = &sci_uart_driver, |
1da177e4 LT |
2268 | }; |
2269 | ||
7b6fd3bf MD |
2270 | static struct console early_serial_console = { |
2271 | .name = "early_ttySC", | |
2272 | .write = serial_console_write, | |
2273 | .flags = CON_PRINTBUFFER, | |
906b17dc | 2274 | .index = -1, |
7b6fd3bf | 2275 | }; |
ecdf8a46 | 2276 | |
7b6fd3bf MD |
2277 | static char early_serial_buf[32]; |
2278 | ||
ecdf8a46 PM |
2279 | static int __devinit sci_probe_earlyprintk(struct platform_device *pdev) |
2280 | { | |
2281 | struct plat_sci_port *cfg = pdev->dev.platform_data; | |
2282 | ||
2283 | if (early_serial_console.data) | |
2284 | return -EEXIST; | |
2285 | ||
2286 | early_serial_console.index = pdev->id; | |
ecdf8a46 | 2287 | |
906b17dc | 2288 | sci_init_single(NULL, &sci_ports[pdev->id], pdev->id, cfg); |
ecdf8a46 PM |
2289 | |
2290 | serial_console_setup(&early_serial_console, early_serial_buf); | |
2291 | ||
2292 | if (!strstr(early_serial_buf, "keep")) | |
2293 | early_serial_console.flags |= CON_BOOT; | |
2294 | ||
2295 | register_console(&early_serial_console); | |
2296 | return 0; | |
2297 | } | |
6a8c9799 | 2298 | |
1ba76220 MD |
2299 | #define uart_console(port) ((port)->cons->index == (port)->line) |
2300 | ||
2301 | static int sci_runtime_suspend(struct device *dev) | |
2302 | { | |
2303 | struct sci_port *sci_port = dev_get_drvdata(dev); | |
2304 | struct uart_port *port = &sci_port->port; | |
2305 | ||
2306 | if (uart_console(port)) { | |
0979e0e6 PM |
2307 | struct plat_sci_reg *reg; |
2308 | ||
b12bb29f PM |
2309 | sci_port->saved_smr = serial_port_in(port, SCSMR); |
2310 | sci_port->saved_brr = serial_port_in(port, SCBRR); | |
0979e0e6 PM |
2311 | |
2312 | reg = sci_getreg(port, SCFCR); | |
2313 | if (reg->size) | |
b12bb29f | 2314 | sci_port->saved_fcr = serial_port_in(port, SCFCR); |
0979e0e6 PM |
2315 | else |
2316 | sci_port->saved_fcr = 0; | |
1ba76220 MD |
2317 | } |
2318 | return 0; | |
2319 | } | |
2320 | ||
2321 | static int sci_runtime_resume(struct device *dev) | |
2322 | { | |
2323 | struct sci_port *sci_port = dev_get_drvdata(dev); | |
2324 | struct uart_port *port = &sci_port->port; | |
2325 | ||
2326 | if (uart_console(port)) { | |
2327 | sci_reset(port); | |
b12bb29f PM |
2328 | serial_port_out(port, SCSMR, sci_port->saved_smr); |
2329 | serial_port_out(port, SCBRR, sci_port->saved_brr); | |
0979e0e6 PM |
2330 | |
2331 | if (sci_port->saved_fcr) | |
b12bb29f | 2332 | serial_port_out(port, SCFCR, sci_port->saved_fcr); |
0979e0e6 | 2333 | |
b12bb29f | 2334 | serial_port_out(port, SCSCR, sci_port->cfg->scscr); |
1ba76220 MD |
2335 | } |
2336 | return 0; | |
2337 | } | |
2338 | ||
6a8c9799 NI |
2339 | #define SCI_CONSOLE (&serial_console) |
2340 | ||
ecdf8a46 PM |
2341 | #else |
2342 | static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev) | |
2343 | { | |
2344 | return -EINVAL; | |
2345 | } | |
1da177e4 | 2346 | |
6a8c9799 | 2347 | #define SCI_CONSOLE NULL |
1ba76220 MD |
2348 | #define sci_runtime_suspend NULL |
2349 | #define sci_runtime_resume NULL | |
6a8c9799 NI |
2350 | |
2351 | #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ | |
1da177e4 LT |
2352 | |
2353 | static char banner[] __initdata = | |
2354 | KERN_INFO "SuperH SCI(F) driver initialized\n"; | |
2355 | ||
2356 | static struct uart_driver sci_uart_driver = { | |
2357 | .owner = THIS_MODULE, | |
2358 | .driver_name = "sci", | |
1da177e4 LT |
2359 | .dev_name = "ttySC", |
2360 | .major = SCI_MAJOR, | |
2361 | .minor = SCI_MINOR_START, | |
e108b2ca | 2362 | .nr = SCI_NPORTS, |
1da177e4 LT |
2363 | .cons = SCI_CONSOLE, |
2364 | }; | |
2365 | ||
54507f6e | 2366 | static int sci_remove(struct platform_device *dev) |
e552de24 | 2367 | { |
d535a230 | 2368 | struct sci_port *port = platform_get_drvdata(dev); |
e552de24 | 2369 | |
d535a230 PM |
2370 | cpufreq_unregister_notifier(&port->freq_transition, |
2371 | CPUFREQ_TRANSITION_NOTIFIER); | |
e552de24 | 2372 | |
d535a230 PM |
2373 | uart_remove_one_port(&sci_uart_driver, &port->port); |
2374 | ||
6dae1421 | 2375 | sci_cleanup_single(port); |
e552de24 | 2376 | |
e552de24 MD |
2377 | return 0; |
2378 | } | |
2379 | ||
0ee70712 MD |
2380 | static int __devinit sci_probe_single(struct platform_device *dev, |
2381 | unsigned int index, | |
2382 | struct plat_sci_port *p, | |
2383 | struct sci_port *sciport) | |
2384 | { | |
0ee70712 MD |
2385 | int ret; |
2386 | ||
2387 | /* Sanity check */ | |
2388 | if (unlikely(index >= SCI_NPORTS)) { | |
2389 | dev_notice(&dev->dev, "Attempting to register port " | |
2390 | "%d when only %d are available.\n", | |
2391 | index+1, SCI_NPORTS); | |
2392 | dev_notice(&dev->dev, "Consider bumping " | |
2393 | "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); | |
b6c5ef6f | 2394 | return -EINVAL; |
0ee70712 MD |
2395 | } |
2396 | ||
c7ed1ab3 PM |
2397 | ret = sci_init_single(dev, sciport, index, p); |
2398 | if (ret) | |
2399 | return ret; | |
0ee70712 | 2400 | |
6dae1421 LP |
2401 | ret = uart_add_one_port(&sci_uart_driver, &sciport->port); |
2402 | if (ret) { | |
2403 | sci_cleanup_single(sciport); | |
2404 | return ret; | |
2405 | } | |
2406 | ||
2407 | return 0; | |
0ee70712 MD |
2408 | } |
2409 | ||
e108b2ca | 2410 | static int __devinit sci_probe(struct platform_device *dev) |
1da177e4 | 2411 | { |
e108b2ca | 2412 | struct plat_sci_port *p = dev->dev.platform_data; |
d535a230 | 2413 | struct sci_port *sp = &sci_ports[dev->id]; |
ecdf8a46 | 2414 | int ret; |
d535a230 | 2415 | |
ecdf8a46 PM |
2416 | /* |
2417 | * If we've come here via earlyprintk initialization, head off to | |
2418 | * the special early probe. We don't have sufficient device state | |
2419 | * to make it beyond this yet. | |
2420 | */ | |
2421 | if (is_early_platform_device(dev)) | |
2422 | return sci_probe_earlyprintk(dev); | |
7b6fd3bf | 2423 | |
d535a230 | 2424 | platform_set_drvdata(dev, sp); |
e552de24 | 2425 | |
906b17dc | 2426 | ret = sci_probe_single(dev, dev->id, p, sp); |
d535a230 | 2427 | if (ret) |
6dae1421 | 2428 | return ret; |
e552de24 | 2429 | |
d535a230 | 2430 | sp->freq_transition.notifier_call = sci_notifier; |
1da177e4 | 2431 | |
d535a230 PM |
2432 | ret = cpufreq_register_notifier(&sp->freq_transition, |
2433 | CPUFREQ_TRANSITION_NOTIFIER); | |
6dae1421 LP |
2434 | if (unlikely(ret < 0)) { |
2435 | sci_cleanup_single(sp); | |
2436 | return ret; | |
2437 | } | |
1da177e4 LT |
2438 | |
2439 | #ifdef CONFIG_SH_STANDARD_BIOS | |
2440 | sh_bios_gdb_detach(); | |
2441 | #endif | |
2442 | ||
e108b2ca | 2443 | return 0; |
1da177e4 LT |
2444 | } |
2445 | ||
6daa79b3 | 2446 | static int sci_suspend(struct device *dev) |
1da177e4 | 2447 | { |
d535a230 | 2448 | struct sci_port *sport = dev_get_drvdata(dev); |
e108b2ca | 2449 | |
d535a230 PM |
2450 | if (sport) |
2451 | uart_suspend_port(&sci_uart_driver, &sport->port); | |
1da177e4 | 2452 | |
e108b2ca PM |
2453 | return 0; |
2454 | } | |
1da177e4 | 2455 | |
6daa79b3 | 2456 | static int sci_resume(struct device *dev) |
e108b2ca | 2457 | { |
d535a230 | 2458 | struct sci_port *sport = dev_get_drvdata(dev); |
e108b2ca | 2459 | |
d535a230 PM |
2460 | if (sport) |
2461 | uart_resume_port(&sci_uart_driver, &sport->port); | |
e108b2ca PM |
2462 | |
2463 | return 0; | |
2464 | } | |
2465 | ||
47145210 | 2466 | static const struct dev_pm_ops sci_dev_pm_ops = { |
1ba76220 MD |
2467 | .runtime_suspend = sci_runtime_suspend, |
2468 | .runtime_resume = sci_runtime_resume, | |
6daa79b3 PM |
2469 | .suspend = sci_suspend, |
2470 | .resume = sci_resume, | |
2471 | }; | |
2472 | ||
e108b2ca PM |
2473 | static struct platform_driver sci_driver = { |
2474 | .probe = sci_probe, | |
b9e39c89 | 2475 | .remove = sci_remove, |
e108b2ca PM |
2476 | .driver = { |
2477 | .name = "sh-sci", | |
2478 | .owner = THIS_MODULE, | |
6daa79b3 | 2479 | .pm = &sci_dev_pm_ops, |
e108b2ca PM |
2480 | }, |
2481 | }; | |
2482 | ||
2483 | static int __init sci_init(void) | |
2484 | { | |
2485 | int ret; | |
2486 | ||
2487 | printk(banner); | |
2488 | ||
e108b2ca PM |
2489 | ret = uart_register_driver(&sci_uart_driver); |
2490 | if (likely(ret == 0)) { | |
2491 | ret = platform_driver_register(&sci_driver); | |
2492 | if (unlikely(ret)) | |
2493 | uart_unregister_driver(&sci_uart_driver); | |
2494 | } | |
2495 | ||
2496 | return ret; | |
2497 | } | |
2498 | ||
2499 | static void __exit sci_exit(void) | |
2500 | { | |
2501 | platform_driver_unregister(&sci_driver); | |
1da177e4 LT |
2502 | uart_unregister_driver(&sci_uart_driver); |
2503 | } | |
2504 | ||
7b6fd3bf MD |
2505 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE |
2506 | early_platform_init_buffer("earlyprintk", &sci_driver, | |
2507 | early_serial_buf, ARRAY_SIZE(early_serial_buf)); | |
2508 | #endif | |
1da177e4 LT |
2509 | module_init(sci_init); |
2510 | module_exit(sci_exit); | |
2511 | ||
e108b2ca | 2512 | MODULE_LICENSE("GPL"); |
e169c139 | 2513 | MODULE_ALIAS("platform:sh-sci"); |
7f405f9c PM |
2514 | MODULE_AUTHOR("Paul Mundt"); |
2515 | MODULE_DESCRIPTION("SuperH SCI(F) serial driver"); |