projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Merge tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaa...
[deliverable/linux.git] / drivers / tty / serial / sunsab.c
CommitLineData
1da177e4
LT		 1/* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC.
2 *
3 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
c4d37215 4 * Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net)
1da177e4
LT		 5 *
6 * Rewrote buffer handling to use CIRC(Circular Buffer) macros.
7 * Maxim Krasnyanskiy <maxk@qualcomm.com>
8 *
9 * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud
10 * rates to be programmed into the UART. Also eliminated a lot of
11 * duplicated code in the console setup.
12 * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
13 *
14 * Ported to new 2.5.x UART layer.
c4d37215 15 * David S. Miller <davem@davemloft.net>
1da177e4
LT		 16 */
17
1da177e4
LT		 18#include <linux/module.h>
19#include <linux/kernel.h>
1da177e4
LT		 20#include <linux/errno.h>
21#include <linux/tty.h>
22#include <linux/tty_flip.h>
23#include <linux/major.h>
24#include <linux/string.h>
25#include <linux/ptrace.h>
26#include <linux/ioport.h>
27#include <linux/circ_buf.h>
28#include <linux/serial.h>
29#include <linux/sysrq.h>
30#include <linux/console.h>
31#include <linux/spinlock.h>
32#include <linux/slab.h>
33#include <linux/delay.h>
34#include <linux/init.h>
c6ed413d 35#include <linux/of_device.h>
1da177e4
LT		 36
37#include <asm/io.h>
38#include <asm/irq.h>
c4d37215 39#include <asm/prom.h>
d550bbd4 40#include <asm/setup.h>
1da177e4 41
744551cc 42#if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
1da177e4
LT		 43#define SUPPORT_SYSRQ
44#endif
45
46#include <linux/serial_core.h>
6816383a 47#include <linux/sunserialcore.h>
1da177e4 48
1da177e4
LT		 49#include "sunsab.h"
50
51struct uart_sunsab_port {
52 struct uart_port port; /* Generic UART port */
53 union sab82532_async_regs __iomem *regs; /* Chip registers */
54 unsigned long irqflags; /* IRQ state flags */
55 int dsr; /* Current DSR state */
56 unsigned int cec_timeout; /* Chip poll timeout... */
57 unsigned int tec_timeout; /* likewise */
58 unsigned char interrupt_mask0;/* ISR0 masking */
59 unsigned char interrupt_mask1;/* ISR1 masking */
60 unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */
61 unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */
9c5b3480 62 unsigned int gis_shift;
1da177e4 63 int type; /* SAB82532 version */
e4fdee8e
DM		 64
65 /* Setting configuration bits while the transmitter is active
66 * can cause garbage characters to get emitted by the chip.
67 * Therefore, we cache such writes here and do the real register
68 * write the next time the transmitter becomes idle.
69 */
70 unsigned int cached_ebrg;
71 unsigned char cached_mode;
72 unsigned char cached_pvr;
73 unsigned char cached_dafo;
1da177e4
LT		 74};
75
76/*
77 * This assumes you have a 29.4912 MHz clock for your UART.
78 */
79#define SAB_BASE_BAUD ( 29491200 / 16 )
80
81static char *sab82532_version[16] = {
82 "V1.0", "V2.0", "V3.2", "V(0x03)",
83 "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)",
84 "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)",
85 "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)"
86};
87
88#define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */
89#define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */
90
91#define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */
92#define SAB82532_XMIT_FIFO_SIZE 32
93
94static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up)
95{
96 int timeout = up->tec_timeout;
97
98 while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout)
99 udelay(1);
100}
101
102static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up)
103{
104 int timeout = up->cec_timeout;
105
106 while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout)
107 udelay(1);
108}
109
2e124b4a 110static struct tty_port *
1da177e4 111receive_chars(struct uart_sunsab_port *up,
7d12e780 112 union sab82532_irq_status *stat)
1da177e4 113{
92a19f9c 114 struct tty_port *port = NULL;
1da177e4
LT		 115 unsigned char buf[32];
116 int saw_console_brk = 0;
117 int free_fifo = 0;
118 int count = 0;
119 int i;
120
2e124b4a 121 if (up->port.state != NULL) /* Unopened serial console */
92a19f9c 122 port = &up->port.state->port;
1da177e4
LT		 123
124 /* Read number of BYTES (Character + Status) available. */
125 if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
126 count = SAB82532_RECV_FIFO_SIZE;
127 free_fifo++;
128 }
129
130 if (stat->sreg.isr0 & SAB82532_ISR0_TCD) {
131 count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1);
132 free_fifo++;
133 }
134
135 /* Issue a FIFO read command in case we where idle. */
136 if (stat->sreg.isr0 & SAB82532_ISR0_TIME) {
137 sunsab_cec_wait(up);
138 writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr);
2e124b4a 139 return port;
1da177e4
LT		 140 }
141
142 if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
143 free_fifo++;
144
145 /* Read the FIFO. */
146 for (i = 0; i < count; i++)
147 buf[i] = readb(&up->regs->r.rfifo[i]);
148
149 /* Issue Receive Message Complete command. */
150 if (free_fifo) {
151 sunsab_cec_wait(up);
152 writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr);
153 }
154
155 /* Count may be zero for BRK, so we check for it here */
156 if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) &&
157 (up->port.line == up->port.cons->index))
158 saw_console_brk = 1;
159
160 for (i = 0; i < count; i++) {
33f0f88f 161 unsigned char ch = buf[i], flag;
1da177e4 162
33f0f88f 163 flag = TTY_NORMAL;
1da177e4
LT		 164 up->port.icount.rx++;
165
166 if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR |
167 SAB82532_ISR0_FERR |
168 SAB82532_ISR0_RFO)) ||
169 unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) {
170 /*
171 * For statistics only
172 */
173 if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
174 stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR |
175 SAB82532_ISR0_FERR);
176 up->port.icount.brk++;
177 /*
178 * We do the SysRQ and SAK checking
179 * here because otherwise the break
180 * may get masked by ignore_status_mask
181 * or read_status_mask.
182 */
183 if (uart_handle_break(&up->port))
184 continue;
185 } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
186 up->port.icount.parity++;
187 else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
188 up->port.icount.frame++;
189 if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
190 up->port.icount.overrun++;
191
192 /*
193 * Mask off conditions which should be ingored.
194 */
195 stat->sreg.isr0 &= (up->port.read_status_mask & 0xff);
196 stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff);
197
198 if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
33f0f88f 199 flag = TTY_BREAK;
1da177e4 200 } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
33f0f88f 201 flag = TTY_PARITY;
1da177e4 202 else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
33f0f88f 203 flag = TTY_FRAME;
1da177e4
LT		 204 }
205
7bbe08d6 206 if (uart_handle_sysrq_char(&up->port, ch) || !port)
1da177e4
LT		 207 continue;
208
209 if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 &&
33f0f88f 210 (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0)
92a19f9c 211 tty_insert_flip_char(port, ch, flag);
33f0f88f 212 if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
92a19f9c 213 tty_insert_flip_char(port, 0, TTY_OVERRUN);
1da177e4
LT		 214 }
215
216 if (saw_console_brk)
217 sun_do_break();
218
2e124b4a 219 return port;
1da177e4
LT		 220}
221
b129a8cc 222static void sunsab_stop_tx(struct uart_port *);
e4fdee8e 223static void sunsab_tx_idle(struct uart_sunsab_port *);
1da177e4
LT		 224
225static void transmit_chars(struct uart_sunsab_port *up,
226 union sab82532_irq_status *stat)
227{
ebd2c8f6 228 struct circ_buf *xmit = &up->port.state->xmit;
1da177e4
LT		 229 int i;
230
231 if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
232 up->interrupt_mask1 |= SAB82532_IMR1_ALLS;
233 writeb(up->interrupt_mask1, &up->regs->w.imr1);
234 set_bit(SAB82532_ALLS, &up->irqflags);
235 }
236
237#if 0 /* bde@nwlink.com says this check causes problems */
238 if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR))
239 return;
240#endif
241
242 if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW))
243 return;
244
245 set_bit(SAB82532_XPR, &up->irqflags);
e4fdee8e 246 sunsab_tx_idle(up);
1da177e4
LT		 247
248 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
249 up->interrupt_mask1 |= SAB82532_IMR1_XPR;
250 writeb(up->interrupt_mask1, &up->regs->w.imr1);
1da177e4
LT		 251 return;
252 }
253
254 up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
255 writeb(up->interrupt_mask1, &up->regs->w.imr1);
256 clear_bit(SAB82532_ALLS, &up->irqflags);
257
258 /* Stuff 32 bytes into Transmit FIFO. */
259 clear_bit(SAB82532_XPR, &up->irqflags);
260 for (i = 0; i < up->port.fifosize; i++) {
261 writeb(xmit->buf[xmit->tail],
262 &up->regs->w.xfifo[i]);
263 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
264 up->port.icount.tx++;
265 if (uart_circ_empty(xmit))
266 break;
267 }
268
269 /* Issue a Transmit Frame command. */
270 sunsab_cec_wait(up);
271 writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
272
273 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
274 uart_write_wakeup(&up->port);
275
276 if (uart_circ_empty(xmit))
b129a8cc 277 sunsab_stop_tx(&up->port);
1da177e4
LT		 278}
279
280static void check_status(struct uart_sunsab_port *up,
281 union sab82532_irq_status *stat)
282{
283 if (stat->sreg.isr0 & SAB82532_ISR0_CDSC)
284 uart_handle_dcd_change(&up->port,
285 !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD));
286
287 if (stat->sreg.isr1 & SAB82532_ISR1_CSC)
288 uart_handle_cts_change(&up->port,
289 (readb(&up->regs->r.star) & SAB82532_STAR_CTS));
290
291 if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) {
292 up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1;
293 up->port.icount.dsr++;
294 }
295
bdc04e31 296 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
1da177e4
LT		 297}
298
7d12e780 299static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
1da177e4
LT		 300{
301 struct uart_sunsab_port *up = dev_id;
2e124b4a 302 struct tty_port *port = NULL;
1da177e4
LT		 303 union sab82532_irq_status status;
304 unsigned long flags;
9c5b3480 305 unsigned char gis;
1da177e4
LT		 306
307 spin_lock_irqsave(&up->port.lock, flags);
308
309 status.stat = 0;
9c5b3480
AV		 310 gis = readb(&up->regs->r.gis) >> up->gis_shift;
311 if (gis & 1)
1da177e4 312 status.sreg.isr0 = readb(&up->regs->r.isr0);
9c5b3480 313 if (gis & 2)
1da177e4
LT		 314 status.sreg.isr1 = readb(&up->regs->r.isr1);
315
1da177e4
LT		 316 if (status.stat) {
317 if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
318 SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
319 (status.sreg.isr1 & SAB82532_ISR1_BRK))
2e124b4a 320 port = receive_chars(up, &status);
1da177e4
LT		 321 if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
322 (status.sreg.isr1 & SAB82532_ISR1_CSC))
323 check_status(up, &status);
324 if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR))
325 transmit_chars(up, &status);
326 }
327
1da177e4
LT		 328 spin_unlock_irqrestore(&up->port.lock, flags);
329
2e124b4a
JS		 330 if (port)
331 tty_flip_buffer_push(port);
1da177e4
LT		 332
333 return IRQ_HANDLED;
334}
335
336/* port->lock is not held. */
337static unsigned int sunsab_tx_empty(struct uart_port *port)
338{
339 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
340 int ret;
341
342 /* Do not need a lock for a state test like this. */
343 if (test_bit(SAB82532_ALLS, &up->irqflags))
344 ret = TIOCSER_TEMT;
345 else
346 ret = 0;
347
348 return ret;
349}
350
351/* port->lock held by caller. */
352static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl)
353{
354 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
355
356 if (mctrl & TIOCM_RTS) {
e4fdee8e
DM		 357 up->cached_mode &= ~SAB82532_MODE_FRTS;
358 up->cached_mode |= SAB82532_MODE_RTS;
1da177e4 359 } else {
e4fdee8e
DM		 360 up->cached_mode |= (SAB82532_MODE_FRTS |
361 SAB82532_MODE_RTS);
1da177e4
LT		 362 }
363 if (mctrl & TIOCM_DTR) {
e4fdee8e 364 up->cached_pvr &= ~(up->pvr_dtr_bit);
1da177e4 365 } else {
e4fdee8e 366 up->cached_pvr |= up->pvr_dtr_bit;
1da177e4 367 }
e4fdee8e
DM		 368
369 set_bit(SAB82532_REGS_PENDING, &up->irqflags);
370 if (test_bit(SAB82532_XPR, &up->irqflags))
371 sunsab_tx_idle(up);
1da177e4
LT		 372}
373
c5f4644e 374/* port->lock is held by caller and interrupts are disabled. */
1da177e4
LT		 375static unsigned int sunsab_get_mctrl(struct uart_port *port)
376{
377 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
1da177e4
LT		 378 unsigned char val;
379 unsigned int result;
380
381 result = 0;
382
1da177e4
LT		 383 val = readb(&up->regs->r.pvr);
384 result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR;
385
386 val = readb(&up->regs->r.vstr);
387 result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR;
388
389 val = readb(&up->regs->r.star);
390 result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0;
391
1da177e4
LT		 392 return result;
393}
394
395/* port->lock held by caller. */
b129a8cc 396static void sunsab_stop_tx(struct uart_port *port)
1da177e4
LT		 397{
398 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
399
400 up->interrupt_mask1 |= SAB82532_IMR1_XPR;
401 writeb(up->interrupt_mask1, &up->regs->w.imr1);
402}
403
e4fdee8e
DM		 404/* port->lock held by caller. */
405static void sunsab_tx_idle(struct uart_sunsab_port *up)
406{
407 if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) {
408 u8 tmp;
409
410 clear_bit(SAB82532_REGS_PENDING, &up->irqflags);
411 writeb(up->cached_mode, &up->regs->rw.mode);
412 writeb(up->cached_pvr, &up->regs->rw.pvr);
413 writeb(up->cached_dafo, &up->regs->w.dafo);
414
415 writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr);
416 tmp = readb(&up->regs->rw.ccr2);
417 tmp &= ~0xc0;
418 tmp |= (up->cached_ebrg >> 2) & 0xc0;
419 writeb(tmp, &up->regs->rw.ccr2);
420 }
421}
422
1da177e4 423/* port->lock held by caller. */
b129a8cc 424static void sunsab_start_tx(struct uart_port *port)
1da177e4
LT		 425{
426 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
ebd2c8f6 427 struct circ_buf *xmit = &up->port.state->xmit;
1da177e4
LT		 428 int i;
429
430 up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
431 writeb(up->interrupt_mask1, &up->regs->w.imr1);
432
433 if (!test_bit(SAB82532_XPR, &up->irqflags))
434 return;
435
436 clear_bit(SAB82532_ALLS, &up->irqflags);
437 clear_bit(SAB82532_XPR, &up->irqflags);
438
439 for (i = 0; i < up->port.fifosize; i++) {
440 writeb(xmit->buf[xmit->tail],
441 &up->regs->w.xfifo[i]);
442 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
443 up->port.icount.tx++;
444 if (uart_circ_empty(xmit))
445 break;
446 }
447
448 /* Issue a Transmit Frame command. */
449 sunsab_cec_wait(up);
450 writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
451}
452
453/* port->lock is not held. */
454static void sunsab_send_xchar(struct uart_port *port, char ch)
455{
456 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
457 unsigned long flags;
458
459 spin_lock_irqsave(&up->port.lock, flags);
460
461 sunsab_tec_wait(up);
462 writeb(ch, &up->regs->w.tic);
463
464 spin_unlock_irqrestore(&up->port.lock, flags);
465}
466
467/* port->lock held by caller. */
468static void sunsab_stop_rx(struct uart_port *port)
469{
470 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
471
935050da 472 up->interrupt_mask0 |= SAB82532_IMR0_TCD;
1da177e4
LT		 473 writeb(up->interrupt_mask1, &up->regs->w.imr0);
474}
475
476/* port->lock held by caller. */
477static void sunsab_enable_ms(struct uart_port *port)
478{
479 /* For now we always receive these interrupts. */
480}
481
482/* port->lock is not held. */
483static void sunsab_break_ctl(struct uart_port *port, int break_state)
484{
485 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
486 unsigned long flags;
487 unsigned char val;
488
489 spin_lock_irqsave(&up->port.lock, flags);
490
e4fdee8e 491 val = up->cached_dafo;
1da177e4
LT		 492 if (break_state)
493 val |= SAB82532_DAFO_XBRK;
494 else
495 val &= ~SAB82532_DAFO_XBRK;
e4fdee8e
DM		 496 up->cached_dafo = val;
497
498 set_bit(SAB82532_REGS_PENDING, &up->irqflags);
499 if (test_bit(SAB82532_XPR, &up->irqflags))
500 sunsab_tx_idle(up);
1da177e4
LT		 501
502 spin_unlock_irqrestore(&up->port.lock, flags);
503}
504
505/* port->lock is not held. */
506static int sunsab_startup(struct uart_port *port)
507{
508 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
509 unsigned long flags;
510 unsigned char tmp;
9c5b3480
AV		 511 int err = request_irq(up->port.irq, sunsab_interrupt,
512 IRQF_SHARED, "sab", up);
513 if (err)
514 return err;
1da177e4
LT		 515
516 spin_lock_irqsave(&up->port.lock, flags);
517
518 /*
519 * Wait for any commands or immediate characters
520 */
521 sunsab_cec_wait(up);
522 sunsab_tec_wait(up);
523
524 /*
525 * Clear the FIFO buffers.
526 */
527 writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr);
528 sunsab_cec_wait(up);
529 writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr);
530
531 /*
532 * Clear the interrupt registers.
533 */
534 (void) readb(&up->regs->r.isr0);
535 (void) readb(&up->regs->r.isr1);
536
537 /*
538 * Now, initialize the UART
539 */
540 writeb(0, &up->regs->w.ccr0); /* power-down */
541 writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ |
542 SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0);
543 writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1);
544 writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL |
545 SAB82532_CCR2_TOE, &up->regs->w.ccr2);
546 writeb(0, &up->regs->w.ccr3);
547 writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4);
e4fdee8e
DM		 548 up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
549 SAB82532_MODE_RAC);
550 writeb(up->cached_mode, &up->regs->w.mode);
1da177e4
LT		 551 writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
552
553 tmp = readb(&up->regs->rw.ccr0);
554 tmp |= SAB82532_CCR0_PU; /* power-up */
555 writeb(tmp, &up->regs->rw.ccr0);
556
557 /*
558 * Finally, enable interrupts
559 */
560 up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
561 SAB82532_IMR0_PLLA);
562 writeb(up->interrupt_mask0, &up->regs->w.imr0);
563 up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
564 SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
565 SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
566 SAB82532_IMR1_XPR);
567 writeb(up->interrupt_mask1, &up->regs->w.imr1);
568 set_bit(SAB82532_ALLS, &up->irqflags);
569 set_bit(SAB82532_XPR, &up->irqflags);
570
571 spin_unlock_irqrestore(&up->port.lock, flags);
572
573 return 0;
574}
575
576/* port->lock is not held. */
577static void sunsab_shutdown(struct uart_port *port)
578{
579 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
580 unsigned long flags;
1da177e4
LT		 581
582 spin_lock_irqsave(&up->port.lock, flags);
583
584 /* Disable Interrupts */
585 up->interrupt_mask0 = 0xff;
586 writeb(up->interrupt_mask0, &up->regs->w.imr0);
587 up->interrupt_mask1 = 0xff;
588 writeb(up->interrupt_mask1, &up->regs->w.imr1);
589
590 /* Disable break condition */
e4fdee8e
DM		 591 up->cached_dafo = readb(&up->regs->rw.dafo);
592 up->cached_dafo &= ~SAB82532_DAFO_XBRK;
593 writeb(up->cached_dafo, &up->regs->rw.dafo);
1da177e4
LT		 594
595 /* Disable Receiver */
e4fdee8e
DM		 596 up->cached_mode &= ~SAB82532_MODE_RAC;
597 writeb(up->cached_mode, &up->regs->rw.mode);
1da177e4
LT		 598
599 /*
600 * XXX FIXME
601 *
602 * If the chip is powered down here the system hangs/crashes during
603 * reboot or shutdown. This needs to be investigated further,
604 * similar behaviour occurs in 2.4 when the driver is configured
605 * as a module only. One hint may be that data is sometimes
606 * transmitted at 9600 baud during shutdown (regardless of the
607 * speed the chip was configured for when the port was open).
608 */
609#if 0
610 /* Power Down */
611 tmp = readb(&up->regs->rw.ccr0);
612 tmp &= ~SAB82532_CCR0_PU;
613 writeb(tmp, &up->regs->rw.ccr0);
614#endif
615
616 spin_unlock_irqrestore(&up->port.lock, flags);
9c5b3480 617 free_irq(up->port.irq, up);
1da177e4
LT		 618}
619
620/*
621 * This is used to figure out the divisor speeds.
622 *
623 * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)),
624 *
625 * with 0 <= N < 64 and 0 <= M < 16
626 */
627
628static void calc_ebrg(int baud, int *n_ret, int *m_ret)
629{
630 int n, m;
631
632 if (baud == 0) {
633 *n_ret = 0;
634 *m_ret = 0;
635 return;
636 }
637
638 /*
639 * We scale numbers by 10 so that we get better accuracy
640 * without having to use floating point. Here we increment m
641 * until n is within the valid range.
642 */
643 n = (SAB_BASE_BAUD * 10) / baud;
644 m = 0;
645 while (n >= 640) {
646 n = n / 2;
647 m++;
648 }
649 n = (n+5) / 10;
650 /*
651 * We try very hard to avoid speeds with M == 0 since they may
652 * not work correctly for XTAL frequences above 10 MHz.
653 */
654 if ((m == 0) && ((n & 1) == 0)) {
655 n = n / 2;
656 m++;
657 }
658 *n_ret = n - 1;
659 *m_ret = m;
660}
661
662/* Internal routine, port->lock is held and local interrupts are disabled. */
663static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag,
b179fb8c
DM		 664 unsigned int iflag, unsigned int baud,
665 unsigned int quot)
1da177e4 666{
1da177e4
LT		 667 unsigned char dafo;
668 int bits, n, m;
669
670 /* Byte size and parity */
671 switch (cflag & CSIZE) {
672 case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break;
673 case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break;
674 case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break;
675 case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break;
676 /* Never happens, but GCC is too dumb to figure it out */
677 default: dafo = SAB82532_DAFO_CHL5; bits = 7; break;
678 }
679
680 if (cflag & CSTOPB) {
681 dafo |= SAB82532_DAFO_STOP;
682 bits++;
683 }
684
685 if (cflag & PARENB) {
686 dafo |= SAB82532_DAFO_PARE;
687 bits++;
688 }
689
690 if (cflag & PARODD) {
691 dafo |= SAB82532_DAFO_PAR_ODD;
692 } else {
693 dafo |= SAB82532_DAFO_PAR_EVEN;
694 }
e4fdee8e 695 up->cached_dafo = dafo;
1da177e4
LT		 696
697 calc_ebrg(baud, &n, &m);
698
e4fdee8e 699 up->cached_ebrg = n | (m << 6);
1da177e4
LT		 700
701 up->tec_timeout = (10 * 1000000) / baud;
702 up->cec_timeout = up->tec_timeout >> 2;
703
704 /* CTS flow control flags */
705 /* We encode read_status_mask and ignore_status_mask like so:
706 *
707 * ---------------------
708 * | ... | ISR1 | ISR0 |
709 * ---------------------
710 * .. 15 8 7 0
711 */
712
713 up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
714 SAB82532_ISR0_RFO | SAB82532_ISR0_RPF |
715 SAB82532_ISR0_CDSC);
716 up->port.read_status_mask |= (SAB82532_ISR1_CSC |
717 SAB82532_ISR1_ALLS |
718 SAB82532_ISR1_XPR) << 8;
719 if (iflag & INPCK)
720 up->port.read_status_mask |= (SAB82532_ISR0_PERR |
721 SAB82532_ISR0_FERR);
722 if (iflag & (BRKINT | PARMRK))
723 up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8);
724
725 /*
726 * Characteres to ignore
727 */
728 up->port.ignore_status_mask = 0;
729 if (iflag & IGNPAR)
730 up->port.ignore_status_mask |= (SAB82532_ISR0_PERR |
731 SAB82532_ISR0_FERR);
732 if (iflag & IGNBRK) {
733 up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8);
734 /*
735 * If we're ignoring parity and break indicators,
736 * ignore overruns too (for real raw support).
737 */
738 if (iflag & IGNPAR)
739 up->port.ignore_status_mask |= SAB82532_ISR0_RFO;
740 }
741
742 /*
743 * ignore all characters if CREAD is not set
744 */
745 if ((cflag & CREAD) == 0)
746 up->port.ignore_status_mask |= (SAB82532_ISR0_RPF |
747 SAB82532_ISR0_TCD);
748
b179fb8c
DM		 749 uart_update_timeout(&up->port, cflag,
750 (up->port.uartclk / (16 * quot)));
751
e4fdee8e
DM		 752 /* Now schedule a register update when the chip's
753 * transmitter is idle.
754 */
755 up->cached_mode |= SAB82532_MODE_RAC;
756 set_bit(SAB82532_REGS_PENDING, &up->irqflags);
757 if (test_bit(SAB82532_XPR, &up->irqflags))
758 sunsab_tx_idle(up);
1da177e4
LT		 759}
760
761/* port->lock is not held. */
606d099c
AC		 762static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios,
763 struct ktermios *old)
1da177e4
LT		 764{
765 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
766 unsigned long flags;
b179fb8c
DM		 767 unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
768 unsigned int quot = uart_get_divisor(port, baud);
1da177e4
LT		 769
770 spin_lock_irqsave(&up->port.lock, flags);
b179fb8c 771 sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot);
1da177e4
LT		 772 spin_unlock_irqrestore(&up->port.lock, flags);
773}
774
775static const char *sunsab_type(struct uart_port *port)
776{
777 struct uart_sunsab_port *up = (void *)port;
778 static char buf[36];
779
780 sprintf(buf, "SAB82532 %s", sab82532_version[up->type]);
781 return buf;
782}
783
784static void sunsab_release_port(struct uart_port *port)
785{
786}
787
788static int sunsab_request_port(struct uart_port *port)
789{
790 return 0;
791}
792
793static void sunsab_config_port(struct uart_port *port, int flags)
794{
795}
796
797static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser)
798{
799 return -EINVAL;
800}
801
802static struct uart_ops sunsab_pops = {
803 .tx_empty = sunsab_tx_empty,
804 .set_mctrl = sunsab_set_mctrl,
805 .get_mctrl = sunsab_get_mctrl,
806 .stop_tx = sunsab_stop_tx,
807 .start_tx = sunsab_start_tx,
808 .send_xchar = sunsab_send_xchar,
809 .stop_rx = sunsab_stop_rx,
810 .enable_ms = sunsab_enable_ms,
811 .break_ctl = sunsab_break_ctl,
812 .startup = sunsab_startup,
813 .shutdown = sunsab_shutdown,
814 .set_termios = sunsab_set_termios,
815 .type = sunsab_type,
816 .release_port = sunsab_release_port,
817 .request_port = sunsab_request_port,
818 .config_port = sunsab_config_port,
819 .verify_port = sunsab_verify_port,
820};
821
822static struct uart_driver sunsab_reg = {
823 .owner = THIS_MODULE,
32039f49 824 .driver_name = "sunsab",
1da177e4
LT		 825 .dev_name = "ttyS",
826 .major = TTY_MAJOR,
827};
828
829static struct uart_sunsab_port *sunsab_ports;
1da177e4
LT		 830
831#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
832
d358788f 833static void sunsab_console_putchar(struct uart_port *port, int c)
1da177e4 834{
d358788f 835 struct uart_sunsab_port *up = (struct uart_sunsab_port *)port;
1da177e4
LT		 836
837 sunsab_tec_wait(up);
838 writeb(c, &up->regs->w.tic);
1da177e4
LT		 839}
840
841static void sunsab_console_write(struct console *con, const char *s, unsigned n)
842{
843 struct uart_sunsab_port *up = &sunsab_ports[con->index];
f3c681c0
DM		 844 unsigned long flags;
845 int locked = 1;
846
e58e241c
DM		 847 if (up->port.sysrq || oops_in_progress)
848 locked = spin_trylock_irqsave(&up->port.lock, flags);
849 else
850 spin_lock_irqsave(&up->port.lock, flags);
1da177e4 851
d358788f 852 uart_console_write(&up->port, s, n, sunsab_console_putchar);
1da177e4 853 sunsab_tec_wait(up);
f3c681c0
DM		 854
855 if (locked)
e58e241c 856 spin_unlock_irqrestore(&up->port.lock, flags);
1da177e4
LT		 857}
858
859static int sunsab_console_setup(struct console *con, char *options)
860{
861 struct uart_sunsab_port *up = &sunsab_ports[con->index];
862 unsigned long flags;
b179fb8c 863 unsigned int baud, quot;
1da177e4 864
0f4184f7
MZ		 865 /*
866 * The console framework calls us for each and every port
867 * registered. Defer the console setup until the requested
868 * port has been properly discovered. A bit of a hack,
869 * though...
870 */
871 if (up->port.type != PORT_SUNSAB)
872 return -1;
873
1da177e4
LT		 874 printk("Console: ttyS%d (SAB82532)\n",
875 (sunsab_reg.minor - 64) + con->index);
876
2dc11581 877 sunserial_console_termios(con, up->port.dev->of_node);
1da177e4 878
1da177e4
LT		 879 switch (con->cflag & CBAUD) {
880 case B150: baud = 150; break;
881 case B300: baud = 300; break;
882 case B600: baud = 600; break;
883 case B1200: baud = 1200; break;
884 case B2400: baud = 2400; break;
885 case B4800: baud = 4800; break;
886 default: case B9600: baud = 9600; break;
887 case B19200: baud = 19200; break;
888 case B38400: baud = 38400; break;
c126cf80
ED		 889 case B57600: baud = 57600; break;
890 case B115200: baud = 115200; break;
891 case B230400: baud = 230400; break;
892 case B460800: baud = 460800; break;
fc811472 893 }
1da177e4
LT		 894
895 /*
896 * Temporary fix.
897 */
898 spin_lock_init(&up->port.lock);
899
900 /*
901 * Initialize the hardware
902 */
903 sunsab_startup(&up->port);
904
905 spin_lock_irqsave(&up->port.lock, flags);
906
907 /*
908 * Finally, enable interrupts
909 */
910 up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
911 SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC;
912 writeb(up->interrupt_mask0, &up->regs->w.imr0);
913 up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
914 SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
915 SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
916 SAB82532_IMR1_XPR;
917 writeb(up->interrupt_mask1, &up->regs->w.imr1);
918
b179fb8c
DM		 919 quot = uart_get_divisor(&up->port, baud);
920 sunsab_convert_to_sab(up, con->cflag, 0, baud, quot);
1da177e4
LT		 921 sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
922
923 spin_unlock_irqrestore(&up->port.lock, flags);
924
925 return 0;
926}
927
928static struct console sunsab_console = {
929 .name = "ttyS",
930 .write = sunsab_console_write,
931 .device = uart_console_device,
932 .setup = sunsab_console_setup,
933 .flags = CON_PRINTBUFFER,
934 .index = -1,
935 .data = &sunsab_reg,
936};
1da177e4 937
1ddb7c98 938static inline struct console *SUNSAB_CONSOLE(void)
1da177e4 939{
1ddb7c98 940 return &sunsab_console;
1da177e4
LT		 941}
942#else
1ddb7c98 943#define SUNSAB_CONSOLE() (NULL)
1da177e4
LT		 944#define sunsab_console_init() do { } while (0)
945#endif
946
9671f099 947static int sunsab_init_one(struct uart_sunsab_port *up,
2dc11581 948 struct platform_device *op,
89d1d0ab
DM		 949 unsigned long offset,
950 int line)
1da177e4 951{
c4d37215
DM		 952 up->port.line = line;
953 up->port.dev = &op->dev;
954
955 up->port.mapbase = op->resource[0].start + offset;
956 up->port.membase = of_ioremap(&op->resource[0], offset,
957 sizeof(union sab82532_async_regs),
958 "sab");
959 if (!up->port.membase)
960 return -ENOMEM;
961 up->regs = (union sab82532_async_regs __iomem *) up->port.membase;
1da177e4 962
1636f8ac 963 up->port.irq = op->archdata.irqs[0];
1da177e4 964
c4d37215
DM		 965 up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
966 up->port.iotype = UPIO_MEM;
1da177e4 967
c4d37215 968 writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
1da177e4 969
c4d37215
DM		 970 up->port.ops = &sunsab_pops;
971 up->port.type = PORT_SUNSAB;
972 up->port.uartclk = SAB_BASE_BAUD;
1da177e4 973
c4d37215
DM		 974 up->type = readb(&up->regs->r.vstr) & 0x0f;
975 writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr);
976 writeb(0xff, &up->regs->w.pim);
977 if ((up->port.line & 0x1) == 0) {
978 up->pvr_dsr_bit = (1 << 0);
979 up->pvr_dtr_bit = (1 << 1);
9c5b3480 980 up->gis_shift = 2;
c4d37215
DM		 981 } else {
982 up->pvr_dsr_bit = (1 << 3);
983 up->pvr_dtr_bit = (1 << 2);
9c5b3480 984 up->gis_shift = 0;
c4d37215
DM		 985 }
986 up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4);
987 writeb(up->cached_pvr, &up->regs->w.pvr);
988 up->cached_mode = readb(&up->regs->rw.mode);
989 up->cached_mode |= SAB82532_MODE_FRTS;
990 writeb(up->cached_mode, &up->regs->rw.mode);
991 up->cached_mode |= SAB82532_MODE_RTS;
992 writeb(up->cached_mode, &up->regs->rw.mode);
1da177e4 993
c4d37215
DM		 994 up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT;
995 up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT;
1da177e4 996
c4d37215 997 return 0;
1da177e4
LT		 998}
999
9671f099 1000static int sab_probe(struct platform_device *op)
1da177e4 1001{
c4d37215
DM		 1002 static int inst;
1003 struct uart_sunsab_port *up;
1004 int err;
1005
1006 up = &sunsab_ports[inst * 2];
1007
1008 err = sunsab_init_one(&up[0], op,
bda2f7b4 1009 0,
c4d37215
DM		 1010 (inst * 2) + 0);
1011 if (err)
9c5b3480 1012 goto out;
c4d37215 1013
bda2f7b4
DM		 1014 err = sunsab_init_one(&up[1], op,
1015 sizeof(union sab82532_async_regs),
c4d37215 1016 (inst * 2) + 1);
9c5b3480
AV		 1017 if (err)
1018 goto out1;
1da177e4 1019
61c7a080 1020 sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node,
4e3533d0
DM		 1021 &sunsab_reg, up[0].port.line,
1022 false);
c73fcc84 1023
61c7a080 1024 sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node,
4e3533d0
DM		 1025 &sunsab_reg, up[1].port.line,
1026 false);
9c5b3480
AV		 1027
1028 err = uart_add_one_port(&sunsab_reg, &up[0].port);
1029 if (err)
1030 goto out2;
1031
1032 err = uart_add_one_port(&sunsab_reg, &up[1].port);
1033 if (err)
1034 goto out3;
1da177e4 1035
696faedd 1036 platform_set_drvdata(op, &up[0]);
1da177e4 1037
c4d37215 1038 inst++;
1da177e4 1039
1da177e4 1040 return 0;
e3a411a3 1041
9c5b3480
AV		 1042out3:
1043 uart_remove_one_port(&sunsab_reg, &up[0].port);
1044out2:
e3a411a3 1045 of_iounmap(&op->resource[0],
9c5b3480 1046 up[1].port.membase,
c4d37215 1047 sizeof(union sab82532_async_regs));
9c5b3480
AV		 1048out1:
1049 of_iounmap(&op->resource[0],
1050 up[0].port.membase,
1051 sizeof(union sab82532_async_regs));
1052out:
1053 return err;
1da177e4
LT		 1054}
1055
ae8d8a14 1056static int sab_remove(struct platform_device *op)
1da177e4 1057{
696faedd 1058 struct uart_sunsab_port *up = platform_get_drvdata(op);
1da177e4 1059
9c5b3480
AV		 1060 uart_remove_one_port(&sunsab_reg, &up[1].port);
1061 uart_remove_one_port(&sunsab_reg, &up[0].port);
1062 of_iounmap(&op->resource[0],
1063 up[1].port.membase,
1064 sizeof(union sab82532_async_regs));
1065 of_iounmap(&op->resource[0],
1066 up[0].port.membase,
1067 sizeof(union sab82532_async_regs));
1da177e4 1068
c4d37215
DM		 1069 return 0;
1070}
1da177e4 1071
fd098316 1072static const struct of_device_id sab_match[] = {
c4d37215
DM		 1073 {
1074 .name = "se",
1075 },
1076 {
1077 .name = "serial",
1078 .compatible = "sab82532",
1079 },
1080 {},
1081};
1082MODULE_DEVICE_TABLE(of, sab_match);
1da177e4 1083
793218df 1084static struct platform_driver sab_driver = {
4018294b
GL		 1085 .driver = {
1086 .name = "sab",
1087 .owner = THIS_MODULE,
1088 .of_match_table = sab_match,
1089 },
c4d37215 1090 .probe = sab_probe,
2d47b716 1091 .remove = sab_remove,
c4d37215 1092};
1da177e4 1093
c4d37215
DM		 1094static int __init sunsab_init(void)
1095{
1096 struct device_node *dp;
1097 int err;
58d784a5 1098 int num_channels = 0;
c4d37215 1099
bda2f7b4 1100 for_each_node_by_name(dp, "se")
c4d37215
DM		 1101 num_channels += 2;
1102 for_each_node_by_name(dp, "serial") {
1103 if (of_device_is_compatible(dp, "sab82532"))
1104 num_channels += 2;
1da177e4
LT		 1105 }
1106
c4d37215
DM		 1107 if (num_channels) {
1108 sunsab_ports = kzalloc(sizeof(struct uart_sunsab_port) *
1109 num_channels, GFP_KERNEL);
1110 if (!sunsab_ports)
1111 return -ENOMEM;
f5deb807 1112
58d784a5 1113 err = sunserial_register_minors(&sunsab_reg, num_channels);
c4d37215
DM		 1114 if (err) {
1115 kfree(sunsab_ports);
1116 sunsab_ports = NULL;
1da177e4 1117
c4d37215
DM		 1118 return err;
1119 }
1da177e4
LT		 1120 }
1121
793218df 1122 return platform_driver_register(&sab_driver);
1da177e4
LT		 1123}
1124
1125static void __exit sunsab_exit(void)
1126{
793218df 1127 platform_driver_unregister(&sab_driver);
58d784a5
MH		 1128 if (sunsab_reg.nr) {
1129 sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr);
1da177e4
LT		 1130 }
1131
1da177e4
LT		 1132 kfree(sunsab_ports);
1133 sunsab_ports = NULL;
1134}
1135
1136module_init(sunsab_init);
1137module_exit(sunsab_exit);
1138
1139MODULE_AUTHOR("Eddie C. Dost and David S. Miller");
1140MODULE_DESCRIPTION("Sun SAB82532 serial port driver");
1141MODULE_LICENSE("GPL");
Linux kernel - Deliverables
This page took 0.836547 seconds and 5 git commands to generate.