Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * message.c - synchronous message handling | |
3 | */ | |
4 | ||
1da177e4 LT |
5 | #include <linux/pci.h> /* for scatterlist macros */ |
6 | #include <linux/usb.h> | |
7 | #include <linux/module.h> | |
8 | #include <linux/slab.h> | |
9 | #include <linux/init.h> | |
10 | #include <linux/mm.h> | |
11 | #include <linux/timer.h> | |
12 | #include <linux/ctype.h> | |
13 | #include <linux/device.h> | |
7ceec1f1 | 14 | #include <linux/usb/quirks.h> |
1da177e4 | 15 | #include <asm/byteorder.h> |
5d68dfcf | 16 | #include <asm/scatterlist.h> |
1da177e4 LT |
17 | |
18 | #include "hcd.h" /* for usbcore internals */ | |
19 | #include "usb.h" | |
20 | ||
7d12e780 | 21 | static void usb_api_blocking_completion(struct urb *urb) |
1da177e4 LT |
22 | { |
23 | complete((struct completion *)urb->context); | |
24 | } | |
25 | ||
26 | ||
ecdc0a59 FBH |
27 | /* |
28 | * Starts urb and waits for completion or timeout. Note that this call | |
29 | * is NOT interruptible. Many device driver i/o requests should be | |
30 | * interruptible and therefore these drivers should implement their | |
31 | * own interruptible routines. | |
32 | */ | |
33 | static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length) | |
1da177e4 | 34 | { |
ecdc0a59 FBH |
35 | struct completion done; |
36 | unsigned long expire; | |
37 | int status; | |
1da177e4 LT |
38 | |
39 | init_completion(&done); | |
40 | urb->context = &done; | |
1da177e4 LT |
41 | urb->actual_length = 0; |
42 | status = usb_submit_urb(urb, GFP_NOIO); | |
ecdc0a59 FBH |
43 | if (unlikely(status)) |
44 | goto out; | |
1da177e4 | 45 | |
ecdc0a59 FBH |
46 | expire = timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT; |
47 | if (!wait_for_completion_timeout(&done, expire)) { | |
48 | ||
49 | dev_dbg(&urb->dev->dev, | |
50 | "%s timed out on ep%d%s len=%d/%d\n", | |
51 | current->comm, | |
52 | usb_pipeendpoint(urb->pipe), | |
53 | usb_pipein(urb->pipe) ? "in" : "out", | |
54 | urb->actual_length, | |
55 | urb->transfer_buffer_length); | |
1da177e4 | 56 | |
ecdc0a59 FBH |
57 | usb_kill_urb(urb); |
58 | status = urb->status == -ENOENT ? -ETIMEDOUT : urb->status; | |
59 | } else | |
60 | status = urb->status; | |
61 | out: | |
1da177e4 LT |
62 | if (actual_length) |
63 | *actual_length = urb->actual_length; | |
ecdc0a59 | 64 | |
1da177e4 LT |
65 | usb_free_urb(urb); |
66 | return status; | |
67 | } | |
68 | ||
69 | /*-------------------------------------------------------------------*/ | |
70 | // returns status (negative) or length (positive) | |
71 | static int usb_internal_control_msg(struct usb_device *usb_dev, | |
72 | unsigned int pipe, | |
73 | struct usb_ctrlrequest *cmd, | |
74 | void *data, int len, int timeout) | |
75 | { | |
76 | struct urb *urb; | |
77 | int retv; | |
78 | int length; | |
79 | ||
80 | urb = usb_alloc_urb(0, GFP_NOIO); | |
81 | if (!urb) | |
82 | return -ENOMEM; | |
83 | ||
84 | usb_fill_control_urb(urb, usb_dev, pipe, (unsigned char *)cmd, data, | |
85 | len, usb_api_blocking_completion, NULL); | |
86 | ||
87 | retv = usb_start_wait_urb(urb, timeout, &length); | |
88 | if (retv < 0) | |
89 | return retv; | |
90 | else | |
91 | return length; | |
92 | } | |
93 | ||
94 | /** | |
95 | * usb_control_msg - Builds a control urb, sends it off and waits for completion | |
96 | * @dev: pointer to the usb device to send the message to | |
97 | * @pipe: endpoint "pipe" to send the message to | |
98 | * @request: USB message request value | |
99 | * @requesttype: USB message request type value | |
100 | * @value: USB message value | |
101 | * @index: USB message index value | |
102 | * @data: pointer to the data to send | |
103 | * @size: length in bytes of the data to send | |
104 | * @timeout: time in msecs to wait for the message to complete before | |
105 | * timing out (if 0 the wait is forever) | |
106 | * Context: !in_interrupt () | |
107 | * | |
108 | * This function sends a simple control message to a specified endpoint | |
109 | * and waits for the message to complete, or timeout. | |
110 | * | |
111 | * If successful, it returns the number of bytes transferred, otherwise a negative error number. | |
112 | * | |
113 | * Don't use this function from within an interrupt context, like a | |
114 | * bottom half handler. If you need an asynchronous message, or need to send | |
115 | * a message from within interrupt context, use usb_submit_urb() | |
116 | * If a thread in your driver uses this call, make sure your disconnect() | |
117 | * method can wait for it to complete. Since you don't have a handle on | |
118 | * the URB used, you can't cancel the request. | |
119 | */ | |
120 | int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype, | |
121 | __u16 value, __u16 index, void *data, __u16 size, int timeout) | |
122 | { | |
123 | struct usb_ctrlrequest *dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO); | |
124 | int ret; | |
125 | ||
126 | if (!dr) | |
127 | return -ENOMEM; | |
128 | ||
129 | dr->bRequestType= requesttype; | |
130 | dr->bRequest = request; | |
131 | dr->wValue = cpu_to_le16p(&value); | |
132 | dr->wIndex = cpu_to_le16p(&index); | |
133 | dr->wLength = cpu_to_le16p(&size); | |
134 | ||
135 | //dbg("usb_control_msg"); | |
136 | ||
137 | ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout); | |
138 | ||
139 | kfree(dr); | |
140 | ||
141 | return ret; | |
142 | } | |
143 | ||
144 | ||
782a7a63 GKH |
145 | /** |
146 | * usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion | |
147 | * @usb_dev: pointer to the usb device to send the message to | |
148 | * @pipe: endpoint "pipe" to send the message to | |
149 | * @data: pointer to the data to send | |
150 | * @len: length in bytes of the data to send | |
151 | * @actual_length: pointer to a location to put the actual length transferred in bytes | |
152 | * @timeout: time in msecs to wait for the message to complete before | |
153 | * timing out (if 0 the wait is forever) | |
154 | * Context: !in_interrupt () | |
155 | * | |
156 | * This function sends a simple interrupt message to a specified endpoint and | |
157 | * waits for the message to complete, or timeout. | |
158 | * | |
159 | * If successful, it returns 0, otherwise a negative error number. The number | |
160 | * of actual bytes transferred will be stored in the actual_length paramater. | |
161 | * | |
162 | * Don't use this function from within an interrupt context, like a bottom half | |
163 | * handler. If you need an asynchronous message, or need to send a message | |
164 | * from within interrupt context, use usb_submit_urb() If a thread in your | |
165 | * driver uses this call, make sure your disconnect() method can wait for it to | |
166 | * complete. Since you don't have a handle on the URB used, you can't cancel | |
167 | * the request. | |
168 | */ | |
169 | int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe, | |
170 | void *data, int len, int *actual_length, int timeout) | |
171 | { | |
172 | return usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout); | |
173 | } | |
174 | EXPORT_SYMBOL_GPL(usb_interrupt_msg); | |
175 | ||
1da177e4 LT |
176 | /** |
177 | * usb_bulk_msg - Builds a bulk urb, sends it off and waits for completion | |
178 | * @usb_dev: pointer to the usb device to send the message to | |
179 | * @pipe: endpoint "pipe" to send the message to | |
180 | * @data: pointer to the data to send | |
181 | * @len: length in bytes of the data to send | |
182 | * @actual_length: pointer to a location to put the actual length transferred in bytes | |
183 | * @timeout: time in msecs to wait for the message to complete before | |
184 | * timing out (if 0 the wait is forever) | |
185 | * Context: !in_interrupt () | |
186 | * | |
187 | * This function sends a simple bulk message to a specified endpoint | |
188 | * and waits for the message to complete, or timeout. | |
189 | * | |
190 | * If successful, it returns 0, otherwise a negative error number. | |
191 | * The number of actual bytes transferred will be stored in the | |
192 | * actual_length paramater. | |
193 | * | |
194 | * Don't use this function from within an interrupt context, like a | |
195 | * bottom half handler. If you need an asynchronous message, or need to | |
196 | * send a message from within interrupt context, use usb_submit_urb() | |
197 | * If a thread in your driver uses this call, make sure your disconnect() | |
198 | * method can wait for it to complete. Since you don't have a handle on | |
199 | * the URB used, you can't cancel the request. | |
d09d36a9 AS |
200 | * |
201 | * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT | |
202 | * ioctl, users are forced to abuse this routine by using it to submit | |
203 | * URBs for interrupt endpoints. We will take the liberty of creating | |
204 | * an interrupt URB (with the default interval) if the target is an | |
205 | * interrupt endpoint. | |
1da177e4 LT |
206 | */ |
207 | int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, | |
208 | void *data, int len, int *actual_length, int timeout) | |
209 | { | |
210 | struct urb *urb; | |
d09d36a9 | 211 | struct usb_host_endpoint *ep; |
1da177e4 | 212 | |
d09d36a9 AS |
213 | ep = (usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out) |
214 | [usb_pipeendpoint(pipe)]; | |
215 | if (!ep || len < 0) | |
1da177e4 LT |
216 | return -EINVAL; |
217 | ||
d09d36a9 | 218 | urb = usb_alloc_urb(0, GFP_KERNEL); |
1da177e4 LT |
219 | if (!urb) |
220 | return -ENOMEM; | |
221 | ||
d09d36a9 AS |
222 | if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == |
223 | USB_ENDPOINT_XFER_INT) { | |
224 | pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); | |
225 | usb_fill_int_urb(urb, usb_dev, pipe, data, len, | |
8d062b9a AS |
226 | usb_api_blocking_completion, NULL, |
227 | ep->desc.bInterval); | |
d09d36a9 AS |
228 | } else |
229 | usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, | |
230 | usb_api_blocking_completion, NULL); | |
1da177e4 LT |
231 | |
232 | return usb_start_wait_urb(urb, timeout, actual_length); | |
233 | } | |
234 | ||
235 | /*-------------------------------------------------------------------*/ | |
236 | ||
237 | static void sg_clean (struct usb_sg_request *io) | |
238 | { | |
239 | if (io->urbs) { | |
240 | while (io->entries--) | |
241 | usb_free_urb (io->urbs [io->entries]); | |
242 | kfree (io->urbs); | |
243 | io->urbs = NULL; | |
244 | } | |
245 | if (io->dev->dev.dma_mask != NULL) | |
246 | usb_buffer_unmap_sg (io->dev, io->pipe, io->sg, io->nents); | |
247 | io->dev = NULL; | |
248 | } | |
249 | ||
7d12e780 | 250 | static void sg_complete (struct urb *urb) |
1da177e4 | 251 | { |
ec17cf1c | 252 | struct usb_sg_request *io = urb->context; |
1da177e4 LT |
253 | |
254 | spin_lock (&io->lock); | |
255 | ||
256 | /* In 2.5 we require hcds' endpoint queues not to progress after fault | |
257 | * reports, until the completion callback (this!) returns. That lets | |
258 | * device driver code (like this routine) unlink queued urbs first, | |
259 | * if it needs to, since the HC won't work on them at all. So it's | |
260 | * not possible for page N+1 to overwrite page N, and so on. | |
261 | * | |
262 | * That's only for "hard" faults; "soft" faults (unlinks) sometimes | |
263 | * complete before the HCD can get requests away from hardware, | |
264 | * though never during cleanup after a hard fault. | |
265 | */ | |
266 | if (io->status | |
267 | && (io->status != -ECONNRESET | |
268 | || urb->status != -ECONNRESET) | |
269 | && urb->actual_length) { | |
270 | dev_err (io->dev->bus->controller, | |
271 | "dev %s ep%d%s scatterlist error %d/%d\n", | |
272 | io->dev->devpath, | |
273 | usb_pipeendpoint (urb->pipe), | |
274 | usb_pipein (urb->pipe) ? "in" : "out", | |
275 | urb->status, io->status); | |
276 | // BUG (); | |
277 | } | |
278 | ||
279 | if (io->status == 0 && urb->status && urb->status != -ECONNRESET) { | |
280 | int i, found, status; | |
281 | ||
282 | io->status = urb->status; | |
283 | ||
284 | /* the previous urbs, and this one, completed already. | |
285 | * unlink pending urbs so they won't rx/tx bad data. | |
286 | * careful: unlink can sometimes be synchronous... | |
287 | */ | |
288 | spin_unlock (&io->lock); | |
289 | for (i = 0, found = 0; i < io->entries; i++) { | |
290 | if (!io->urbs [i] || !io->urbs [i]->dev) | |
291 | continue; | |
292 | if (found) { | |
293 | status = usb_unlink_urb (io->urbs [i]); | |
8f34c288 | 294 | if (status != -EINPROGRESS |
295 | && status != -ENODEV | |
296 | && status != -EBUSY) | |
1da177e4 LT |
297 | dev_err (&io->dev->dev, |
298 | "%s, unlink --> %d\n", | |
299 | __FUNCTION__, status); | |
300 | } else if (urb == io->urbs [i]) | |
301 | found = 1; | |
302 | } | |
303 | spin_lock (&io->lock); | |
304 | } | |
305 | urb->dev = NULL; | |
306 | ||
307 | /* on the last completion, signal usb_sg_wait() */ | |
308 | io->bytes += urb->actual_length; | |
309 | io->count--; | |
310 | if (!io->count) | |
311 | complete (&io->complete); | |
312 | ||
313 | spin_unlock (&io->lock); | |
314 | } | |
315 | ||
316 | ||
317 | /** | |
318 | * usb_sg_init - initializes scatterlist-based bulk/interrupt I/O request | |
319 | * @io: request block being initialized. until usb_sg_wait() returns, | |
320 | * treat this as a pointer to an opaque block of memory, | |
321 | * @dev: the usb device that will send or receive the data | |
322 | * @pipe: endpoint "pipe" used to transfer the data | |
323 | * @period: polling rate for interrupt endpoints, in frames or | |
324 | * (for high speed endpoints) microframes; ignored for bulk | |
325 | * @sg: scatterlist entries | |
326 | * @nents: how many entries in the scatterlist | |
327 | * @length: how many bytes to send from the scatterlist, or zero to | |
328 | * send every byte identified in the list. | |
329 | * @mem_flags: SLAB_* flags affecting memory allocations in this call | |
330 | * | |
331 | * Returns zero for success, else a negative errno value. This initializes a | |
332 | * scatter/gather request, allocating resources such as I/O mappings and urb | |
333 | * memory (except maybe memory used by USB controller drivers). | |
334 | * | |
335 | * The request must be issued using usb_sg_wait(), which waits for the I/O to | |
336 | * complete (or to be canceled) and then cleans up all resources allocated by | |
337 | * usb_sg_init(). | |
338 | * | |
339 | * The request may be canceled with usb_sg_cancel(), either before or after | |
340 | * usb_sg_wait() is called. | |
341 | */ | |
342 | int usb_sg_init ( | |
343 | struct usb_sg_request *io, | |
344 | struct usb_device *dev, | |
345 | unsigned pipe, | |
346 | unsigned period, | |
347 | struct scatterlist *sg, | |
348 | int nents, | |
349 | size_t length, | |
55016f10 | 350 | gfp_t mem_flags |
1da177e4 LT |
351 | ) |
352 | { | |
353 | int i; | |
354 | int urb_flags; | |
355 | int dma; | |
356 | ||
357 | if (!io || !dev || !sg | |
358 | || usb_pipecontrol (pipe) | |
359 | || usb_pipeisoc (pipe) | |
360 | || nents <= 0) | |
361 | return -EINVAL; | |
362 | ||
363 | spin_lock_init (&io->lock); | |
364 | io->dev = dev; | |
365 | io->pipe = pipe; | |
366 | io->sg = sg; | |
367 | io->nents = nents; | |
368 | ||
369 | /* not all host controllers use DMA (like the mainstream pci ones); | |
370 | * they can use PIO (sl811) or be software over another transport. | |
371 | */ | |
372 | dma = (dev->dev.dma_mask != NULL); | |
373 | if (dma) | |
374 | io->entries = usb_buffer_map_sg (dev, pipe, sg, nents); | |
375 | else | |
376 | io->entries = nents; | |
377 | ||
378 | /* initialize all the urbs we'll use */ | |
379 | if (io->entries <= 0) | |
380 | return io->entries; | |
381 | ||
382 | io->count = io->entries; | |
383 | io->urbs = kmalloc (io->entries * sizeof *io->urbs, mem_flags); | |
384 | if (!io->urbs) | |
385 | goto nomem; | |
386 | ||
b375a049 | 387 | urb_flags = URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT; |
1da177e4 LT |
388 | if (usb_pipein (pipe)) |
389 | urb_flags |= URB_SHORT_NOT_OK; | |
390 | ||
391 | for (i = 0; i < io->entries; i++) { | |
392 | unsigned len; | |
393 | ||
394 | io->urbs [i] = usb_alloc_urb (0, mem_flags); | |
395 | if (!io->urbs [i]) { | |
396 | io->entries = i; | |
397 | goto nomem; | |
398 | } | |
399 | ||
400 | io->urbs [i]->dev = NULL; | |
401 | io->urbs [i]->pipe = pipe; | |
402 | io->urbs [i]->interval = period; | |
403 | io->urbs [i]->transfer_flags = urb_flags; | |
404 | ||
405 | io->urbs [i]->complete = sg_complete; | |
406 | io->urbs [i]->context = io; | |
1da177e4 | 407 | |
35d07fd5 TL |
408 | /* |
409 | * Some systems need to revert to PIO when DMA is temporarily | |
410 | * unavailable. For their sakes, both transfer_buffer and | |
411 | * transfer_dma are set when possible. However this can only | |
412 | * work on systems without HIGHMEM, since DMA buffers located | |
413 | * in high memory are not directly addressable by the CPU for | |
414 | * PIO ... so when HIGHMEM is in use, transfer_buffer is NULL | |
415 | * to prevent stale pointers and to help spot bugs. | |
416 | */ | |
1da177e4 | 417 | if (dma) { |
1da177e4 LT |
418 | io->urbs [i]->transfer_dma = sg_dma_address (sg + i); |
419 | len = sg_dma_len (sg + i); | |
35d07fd5 TL |
420 | #ifdef CONFIG_HIGHMEM |
421 | io->urbs[i]->transfer_buffer = NULL; | |
422 | #else | |
423 | io->urbs[i]->transfer_buffer = | |
424 | page_address(sg[i].page) + sg[i].offset; | |
425 | #endif | |
1da177e4 LT |
426 | } else { |
427 | /* hc may use _only_ transfer_buffer */ | |
428 | io->urbs [i]->transfer_buffer = | |
429 | page_address (sg [i].page) + sg [i].offset; | |
430 | len = sg [i].length; | |
431 | } | |
432 | ||
433 | if (length) { | |
434 | len = min_t (unsigned, len, length); | |
435 | length -= len; | |
436 | if (length == 0) | |
437 | io->entries = i + 1; | |
438 | } | |
439 | io->urbs [i]->transfer_buffer_length = len; | |
440 | } | |
441 | io->urbs [--i]->transfer_flags &= ~URB_NO_INTERRUPT; | |
442 | ||
443 | /* transaction state */ | |
444 | io->status = 0; | |
445 | io->bytes = 0; | |
446 | init_completion (&io->complete); | |
447 | return 0; | |
448 | ||
449 | nomem: | |
450 | sg_clean (io); | |
451 | return -ENOMEM; | |
452 | } | |
453 | ||
454 | ||
455 | /** | |
456 | * usb_sg_wait - synchronously execute scatter/gather request | |
457 | * @io: request block handle, as initialized with usb_sg_init(). | |
458 | * some fields become accessible when this call returns. | |
459 | * Context: !in_interrupt () | |
460 | * | |
461 | * This function blocks until the specified I/O operation completes. It | |
462 | * leverages the grouping of the related I/O requests to get good transfer | |
463 | * rates, by queueing the requests. At higher speeds, such queuing can | |
464 | * significantly improve USB throughput. | |
465 | * | |
466 | * There are three kinds of completion for this function. | |
467 | * (1) success, where io->status is zero. The number of io->bytes | |
468 | * transferred is as requested. | |
469 | * (2) error, where io->status is a negative errno value. The number | |
470 | * of io->bytes transferred before the error is usually less | |
471 | * than requested, and can be nonzero. | |
093cf723 | 472 | * (3) cancellation, a type of error with status -ECONNRESET that |
1da177e4 LT |
473 | * is initiated by usb_sg_cancel(). |
474 | * | |
475 | * When this function returns, all memory allocated through usb_sg_init() or | |
476 | * this call will have been freed. The request block parameter may still be | |
477 | * passed to usb_sg_cancel(), or it may be freed. It could also be | |
478 | * reinitialized and then reused. | |
479 | * | |
480 | * Data Transfer Rates: | |
481 | * | |
482 | * Bulk transfers are valid for full or high speed endpoints. | |
483 | * The best full speed data rate is 19 packets of 64 bytes each | |
484 | * per frame, or 1216 bytes per millisecond. | |
485 | * The best high speed data rate is 13 packets of 512 bytes each | |
486 | * per microframe, or 52 KBytes per millisecond. | |
487 | * | |
488 | * The reason to use interrupt transfers through this API would most likely | |
489 | * be to reserve high speed bandwidth, where up to 24 KBytes per millisecond | |
490 | * could be transferred. That capability is less useful for low or full | |
491 | * speed interrupt endpoints, which allow at most one packet per millisecond, | |
492 | * of at most 8 or 64 bytes (respectively). | |
493 | */ | |
494 | void usb_sg_wait (struct usb_sg_request *io) | |
495 | { | |
496 | int i, entries = io->entries; | |
497 | ||
498 | /* queue the urbs. */ | |
499 | spin_lock_irq (&io->lock); | |
8ccef0df AS |
500 | i = 0; |
501 | while (i < entries && !io->status) { | |
1da177e4 LT |
502 | int retval; |
503 | ||
504 | io->urbs [i]->dev = io->dev; | |
54e6ecb2 | 505 | retval = usb_submit_urb (io->urbs [i], GFP_ATOMIC); |
1da177e4 LT |
506 | |
507 | /* after we submit, let completions or cancelations fire; | |
508 | * we handshake using io->status. | |
509 | */ | |
510 | spin_unlock_irq (&io->lock); | |
511 | switch (retval) { | |
512 | /* maybe we retrying will recover */ | |
513 | case -ENXIO: // hc didn't queue this one | |
514 | case -EAGAIN: | |
515 | case -ENOMEM: | |
516 | io->urbs[i]->dev = NULL; | |
517 | retval = 0; | |
1da177e4 LT |
518 | yield (); |
519 | break; | |
520 | ||
521 | /* no error? continue immediately. | |
522 | * | |
523 | * NOTE: to work better with UHCI (4K I/O buffer may | |
524 | * need 3K of TDs) it may be good to limit how many | |
525 | * URBs are queued at once; N milliseconds? | |
526 | */ | |
527 | case 0: | |
8ccef0df | 528 | ++i; |
1da177e4 LT |
529 | cpu_relax (); |
530 | break; | |
531 | ||
532 | /* fail any uncompleted urbs */ | |
533 | default: | |
534 | io->urbs [i]->dev = NULL; | |
535 | io->urbs [i]->status = retval; | |
536 | dev_dbg (&io->dev->dev, "%s, submit --> %d\n", | |
537 | __FUNCTION__, retval); | |
538 | usb_sg_cancel (io); | |
539 | } | |
540 | spin_lock_irq (&io->lock); | |
541 | if (retval && (io->status == 0 || io->status == -ECONNRESET)) | |
542 | io->status = retval; | |
543 | } | |
544 | io->count -= entries - i; | |
545 | if (io->count == 0) | |
546 | complete (&io->complete); | |
547 | spin_unlock_irq (&io->lock); | |
548 | ||
549 | /* OK, yes, this could be packaged as non-blocking. | |
550 | * So could the submit loop above ... but it's easier to | |
551 | * solve neither problem than to solve both! | |
552 | */ | |
553 | wait_for_completion (&io->complete); | |
554 | ||
555 | sg_clean (io); | |
556 | } | |
557 | ||
558 | /** | |
559 | * usb_sg_cancel - stop scatter/gather i/o issued by usb_sg_wait() | |
560 | * @io: request block, initialized with usb_sg_init() | |
561 | * | |
562 | * This stops a request after it has been started by usb_sg_wait(). | |
563 | * It can also prevents one initialized by usb_sg_init() from starting, | |
564 | * so that call just frees resources allocated to the request. | |
565 | */ | |
566 | void usb_sg_cancel (struct usb_sg_request *io) | |
567 | { | |
568 | unsigned long flags; | |
569 | ||
570 | spin_lock_irqsave (&io->lock, flags); | |
571 | ||
572 | /* shut everything down, if it didn't already */ | |
573 | if (!io->status) { | |
574 | int i; | |
575 | ||
576 | io->status = -ECONNRESET; | |
577 | spin_unlock (&io->lock); | |
578 | for (i = 0; i < io->entries; i++) { | |
579 | int retval; | |
580 | ||
581 | if (!io->urbs [i]->dev) | |
582 | continue; | |
583 | retval = usb_unlink_urb (io->urbs [i]); | |
584 | if (retval != -EINPROGRESS && retval != -EBUSY) | |
585 | dev_warn (&io->dev->dev, "%s, unlink --> %d\n", | |
586 | __FUNCTION__, retval); | |
587 | } | |
588 | spin_lock (&io->lock); | |
589 | } | |
590 | spin_unlock_irqrestore (&io->lock, flags); | |
591 | } | |
592 | ||
593 | /*-------------------------------------------------------------------*/ | |
594 | ||
595 | /** | |
596 | * usb_get_descriptor - issues a generic GET_DESCRIPTOR request | |
597 | * @dev: the device whose descriptor is being retrieved | |
598 | * @type: the descriptor type (USB_DT_*) | |
599 | * @index: the number of the descriptor | |
600 | * @buf: where to put the descriptor | |
601 | * @size: how big is "buf"? | |
602 | * Context: !in_interrupt () | |
603 | * | |
604 | * Gets a USB descriptor. Convenience functions exist to simplify | |
605 | * getting some types of descriptors. Use | |
606 | * usb_get_string() or usb_string() for USB_DT_STRING. | |
607 | * Device (USB_DT_DEVICE) and configuration descriptors (USB_DT_CONFIG) | |
608 | * are part of the device structure. | |
609 | * In addition to a number of USB-standard descriptors, some | |
610 | * devices also use class-specific or vendor-specific descriptors. | |
611 | * | |
612 | * This call is synchronous, and may not be used in an interrupt context. | |
613 | * | |
614 | * Returns the number of bytes received on success, or else the status code | |
615 | * returned by the underlying usb_control_msg() call. | |
616 | */ | |
617 | int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char index, void *buf, int size) | |
618 | { | |
619 | int i; | |
620 | int result; | |
621 | ||
622 | memset(buf,0,size); // Make sure we parse really received data | |
623 | ||
624 | for (i = 0; i < 3; ++i) { | |
625 | /* retry on length 0 or stall; some devices are flakey */ | |
626 | result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | |
627 | USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, | |
628 | (type << 8) + index, 0, buf, size, | |
629 | USB_CTRL_GET_TIMEOUT); | |
630 | if (result == 0 || result == -EPIPE) | |
631 | continue; | |
632 | if (result > 1 && ((u8 *)buf)[1] != type) { | |
633 | result = -EPROTO; | |
634 | continue; | |
635 | } | |
636 | break; | |
637 | } | |
638 | return result; | |
639 | } | |
640 | ||
641 | /** | |
642 | * usb_get_string - gets a string descriptor | |
643 | * @dev: the device whose string descriptor is being retrieved | |
644 | * @langid: code for language chosen (from string descriptor zero) | |
645 | * @index: the number of the descriptor | |
646 | * @buf: where to put the string | |
647 | * @size: how big is "buf"? | |
648 | * Context: !in_interrupt () | |
649 | * | |
650 | * Retrieves a string, encoded using UTF-16LE (Unicode, 16 bits per character, | |
651 | * in little-endian byte order). | |
652 | * The usb_string() function will often be a convenient way to turn | |
653 | * these strings into kernel-printable form. | |
654 | * | |
655 | * Strings may be referenced in device, configuration, interface, or other | |
656 | * descriptors, and could also be used in vendor-specific ways. | |
657 | * | |
658 | * This call is synchronous, and may not be used in an interrupt context. | |
659 | * | |
660 | * Returns the number of bytes received on success, or else the status code | |
661 | * returned by the underlying usb_control_msg() call. | |
662 | */ | |
e266a124 AB |
663 | static int usb_get_string(struct usb_device *dev, unsigned short langid, |
664 | unsigned char index, void *buf, int size) | |
1da177e4 LT |
665 | { |
666 | int i; | |
667 | int result; | |
668 | ||
669 | for (i = 0; i < 3; ++i) { | |
670 | /* retry on length 0 or stall; some devices are flakey */ | |
671 | result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | |
672 | USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, | |
673 | (USB_DT_STRING << 8) + index, langid, buf, size, | |
674 | USB_CTRL_GET_TIMEOUT); | |
675 | if (!(result == 0 || result == -EPIPE)) | |
676 | break; | |
677 | } | |
678 | return result; | |
679 | } | |
680 | ||
681 | static void usb_try_string_workarounds(unsigned char *buf, int *length) | |
682 | { | |
683 | int newlength, oldlength = *length; | |
684 | ||
685 | for (newlength = 2; newlength + 1 < oldlength; newlength += 2) | |
686 | if (!isprint(buf[newlength]) || buf[newlength + 1]) | |
687 | break; | |
688 | ||
689 | if (newlength > 2) { | |
690 | buf[0] = newlength; | |
691 | *length = newlength; | |
692 | } | |
693 | } | |
694 | ||
695 | static int usb_string_sub(struct usb_device *dev, unsigned int langid, | |
696 | unsigned int index, unsigned char *buf) | |
697 | { | |
698 | int rc; | |
699 | ||
700 | /* Try to read the string descriptor by asking for the maximum | |
701 | * possible number of bytes */ | |
7ceec1f1 ON |
702 | if (dev->quirks & USB_QUIRK_STRING_FETCH_255) |
703 | rc = -EIO; | |
704 | else | |
705 | rc = usb_get_string(dev, langid, index, buf, 255); | |
1da177e4 LT |
706 | |
707 | /* If that failed try to read the descriptor length, then | |
708 | * ask for just that many bytes */ | |
709 | if (rc < 2) { | |
710 | rc = usb_get_string(dev, langid, index, buf, 2); | |
711 | if (rc == 2) | |
712 | rc = usb_get_string(dev, langid, index, buf, buf[0]); | |
713 | } | |
714 | ||
715 | if (rc >= 2) { | |
716 | if (!buf[0] && !buf[1]) | |
717 | usb_try_string_workarounds(buf, &rc); | |
718 | ||
719 | /* There might be extra junk at the end of the descriptor */ | |
720 | if (buf[0] < rc) | |
721 | rc = buf[0]; | |
722 | ||
723 | rc = rc - (rc & 1); /* force a multiple of two */ | |
724 | } | |
725 | ||
726 | if (rc < 2) | |
727 | rc = (rc < 0 ? rc : -EINVAL); | |
728 | ||
729 | return rc; | |
730 | } | |
731 | ||
732 | /** | |
733 | * usb_string - returns ISO 8859-1 version of a string descriptor | |
734 | * @dev: the device whose string descriptor is being retrieved | |
735 | * @index: the number of the descriptor | |
736 | * @buf: where to put the string | |
737 | * @size: how big is "buf"? | |
738 | * Context: !in_interrupt () | |
739 | * | |
740 | * This converts the UTF-16LE encoded strings returned by devices, from | |
741 | * usb_get_string_descriptor(), to null-terminated ISO-8859-1 encoded ones | |
742 | * that are more usable in most kernel contexts. Note that all characters | |
743 | * in the chosen descriptor that can't be encoded using ISO-8859-1 | |
744 | * are converted to the question mark ("?") character, and this function | |
745 | * chooses strings in the first language supported by the device. | |
746 | * | |
747 | * The ASCII (or, redundantly, "US-ASCII") character set is the seven-bit | |
748 | * subset of ISO 8859-1. ISO-8859-1 is the eight-bit subset of Unicode, | |
749 | * and is appropriate for use many uses of English and several other | |
750 | * Western European languages. (But it doesn't include the "Euro" symbol.) | |
751 | * | |
752 | * This call is synchronous, and may not be used in an interrupt context. | |
753 | * | |
754 | * Returns length of the string (>= 0) or usb_control_msg status (< 0). | |
755 | */ | |
756 | int usb_string(struct usb_device *dev, int index, char *buf, size_t size) | |
757 | { | |
758 | unsigned char *tbuf; | |
759 | int err; | |
760 | unsigned int u, idx; | |
761 | ||
762 | if (dev->state == USB_STATE_SUSPENDED) | |
763 | return -EHOSTUNREACH; | |
764 | if (size <= 0 || !buf || !index) | |
765 | return -EINVAL; | |
766 | buf[0] = 0; | |
767 | tbuf = kmalloc(256, GFP_KERNEL); | |
768 | if (!tbuf) | |
769 | return -ENOMEM; | |
770 | ||
771 | /* get langid for strings if it's not yet known */ | |
772 | if (!dev->have_langid) { | |
773 | err = usb_string_sub(dev, 0, 0, tbuf); | |
774 | if (err < 0) { | |
775 | dev_err (&dev->dev, | |
776 | "string descriptor 0 read error: %d\n", | |
777 | err); | |
778 | goto errout; | |
779 | } else if (err < 4) { | |
780 | dev_err (&dev->dev, "string descriptor 0 too short\n"); | |
781 | err = -EINVAL; | |
782 | goto errout; | |
783 | } else { | |
ce361587 | 784 | dev->have_langid = 1; |
1da177e4 LT |
785 | dev->string_langid = tbuf[2] | (tbuf[3]<< 8); |
786 | /* always use the first langid listed */ | |
787 | dev_dbg (&dev->dev, "default language 0x%04x\n", | |
788 | dev->string_langid); | |
789 | } | |
790 | } | |
791 | ||
792 | err = usb_string_sub(dev, dev->string_langid, index, tbuf); | |
793 | if (err < 0) | |
794 | goto errout; | |
795 | ||
796 | size--; /* leave room for trailing NULL char in output buffer */ | |
797 | for (idx = 0, u = 2; u < err; u += 2) { | |
798 | if (idx >= size) | |
799 | break; | |
800 | if (tbuf[u+1]) /* high byte */ | |
801 | buf[idx++] = '?'; /* non ISO-8859-1 character */ | |
802 | else | |
803 | buf[idx++] = tbuf[u]; | |
804 | } | |
805 | buf[idx] = 0; | |
806 | err = idx; | |
807 | ||
808 | if (tbuf[1] != USB_DT_STRING) | |
809 | dev_dbg(&dev->dev, "wrong descriptor type %02x for string %d (\"%s\")\n", tbuf[1], index, buf); | |
810 | ||
811 | errout: | |
812 | kfree(tbuf); | |
813 | return err; | |
814 | } | |
815 | ||
4f62efe6 AS |
816 | /** |
817 | * usb_cache_string - read a string descriptor and cache it for later use | |
818 | * @udev: the device whose string descriptor is being read | |
819 | * @index: the descriptor index | |
820 | * | |
821 | * Returns a pointer to a kmalloc'ed buffer containing the descriptor string, | |
822 | * or NULL if the index is 0 or the string could not be read. | |
823 | */ | |
824 | char *usb_cache_string(struct usb_device *udev, int index) | |
825 | { | |
826 | char *buf; | |
827 | char *smallbuf = NULL; | |
828 | int len; | |
829 | ||
830 | if (index > 0 && (buf = kmalloc(256, GFP_KERNEL)) != NULL) { | |
831 | if ((len = usb_string(udev, index, buf, 256)) > 0) { | |
832 | if ((smallbuf = kmalloc(++len, GFP_KERNEL)) == NULL) | |
833 | return buf; | |
834 | memcpy(smallbuf, buf, len); | |
835 | } | |
836 | kfree(buf); | |
837 | } | |
838 | return smallbuf; | |
839 | } | |
840 | ||
1da177e4 LT |
841 | /* |
842 | * usb_get_device_descriptor - (re)reads the device descriptor (usbcore) | |
843 | * @dev: the device whose device descriptor is being updated | |
844 | * @size: how much of the descriptor to read | |
845 | * Context: !in_interrupt () | |
846 | * | |
847 | * Updates the copy of the device descriptor stored in the device structure, | |
6ab16a90 | 848 | * which dedicates space for this purpose. |
1da177e4 LT |
849 | * |
850 | * Not exported, only for use by the core. If drivers really want to read | |
851 | * the device descriptor directly, they can call usb_get_descriptor() with | |
852 | * type = USB_DT_DEVICE and index = 0. | |
853 | * | |
854 | * This call is synchronous, and may not be used in an interrupt context. | |
855 | * | |
856 | * Returns the number of bytes received on success, or else the status code | |
857 | * returned by the underlying usb_control_msg() call. | |
858 | */ | |
859 | int usb_get_device_descriptor(struct usb_device *dev, unsigned int size) | |
860 | { | |
861 | struct usb_device_descriptor *desc; | |
862 | int ret; | |
863 | ||
864 | if (size > sizeof(*desc)) | |
865 | return -EINVAL; | |
866 | desc = kmalloc(sizeof(*desc), GFP_NOIO); | |
867 | if (!desc) | |
868 | return -ENOMEM; | |
869 | ||
870 | ret = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, size); | |
871 | if (ret >= 0) | |
872 | memcpy(&dev->descriptor, desc, size); | |
873 | kfree(desc); | |
874 | return ret; | |
875 | } | |
876 | ||
877 | /** | |
878 | * usb_get_status - issues a GET_STATUS call | |
879 | * @dev: the device whose status is being checked | |
880 | * @type: USB_RECIP_*; for device, interface, or endpoint | |
881 | * @target: zero (for device), else interface or endpoint number | |
882 | * @data: pointer to two bytes of bitmap data | |
883 | * Context: !in_interrupt () | |
884 | * | |
885 | * Returns device, interface, or endpoint status. Normally only of | |
886 | * interest to see if the device is self powered, or has enabled the | |
887 | * remote wakeup facility; or whether a bulk or interrupt endpoint | |
888 | * is halted ("stalled"). | |
889 | * | |
890 | * Bits in these status bitmaps are set using the SET_FEATURE request, | |
891 | * and cleared using the CLEAR_FEATURE request. The usb_clear_halt() | |
892 | * function should be used to clear halt ("stall") status. | |
893 | * | |
894 | * This call is synchronous, and may not be used in an interrupt context. | |
895 | * | |
896 | * Returns the number of bytes received on success, or else the status code | |
897 | * returned by the underlying usb_control_msg() call. | |
898 | */ | |
899 | int usb_get_status(struct usb_device *dev, int type, int target, void *data) | |
900 | { | |
901 | int ret; | |
902 | u16 *status = kmalloc(sizeof(*status), GFP_KERNEL); | |
903 | ||
904 | if (!status) | |
905 | return -ENOMEM; | |
906 | ||
907 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | |
908 | USB_REQ_GET_STATUS, USB_DIR_IN | type, 0, target, status, | |
909 | sizeof(*status), USB_CTRL_GET_TIMEOUT); | |
910 | ||
911 | *(u16 *)data = *status; | |
912 | kfree(status); | |
913 | return ret; | |
914 | } | |
915 | ||
916 | /** | |
917 | * usb_clear_halt - tells device to clear endpoint halt/stall condition | |
918 | * @dev: device whose endpoint is halted | |
919 | * @pipe: endpoint "pipe" being cleared | |
920 | * Context: !in_interrupt () | |
921 | * | |
922 | * This is used to clear halt conditions for bulk and interrupt endpoints, | |
923 | * as reported by URB completion status. Endpoints that are halted are | |
924 | * sometimes referred to as being "stalled". Such endpoints are unable | |
925 | * to transmit or receive data until the halt status is cleared. Any URBs | |
926 | * queued for such an endpoint should normally be unlinked by the driver | |
927 | * before clearing the halt condition, as described in sections 5.7.5 | |
928 | * and 5.8.5 of the USB 2.0 spec. | |
929 | * | |
930 | * Note that control and isochronous endpoints don't halt, although control | |
931 | * endpoints report "protocol stall" (for unsupported requests) using the | |
932 | * same status code used to report a true stall. | |
933 | * | |
934 | * This call is synchronous, and may not be used in an interrupt context. | |
935 | * | |
936 | * Returns zero on success, or else the status code returned by the | |
937 | * underlying usb_control_msg() call. | |
938 | */ | |
939 | int usb_clear_halt(struct usb_device *dev, int pipe) | |
940 | { | |
941 | int result; | |
942 | int endp = usb_pipeendpoint(pipe); | |
943 | ||
944 | if (usb_pipein (pipe)) | |
945 | endp |= USB_DIR_IN; | |
946 | ||
947 | /* we don't care if it wasn't halted first. in fact some devices | |
948 | * (like some ibmcam model 1 units) seem to expect hosts to make | |
949 | * this request for iso endpoints, which can't halt! | |
950 | */ | |
951 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
952 | USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, | |
953 | USB_ENDPOINT_HALT, endp, NULL, 0, | |
954 | USB_CTRL_SET_TIMEOUT); | |
955 | ||
956 | /* don't un-halt or force to DATA0 except on success */ | |
957 | if (result < 0) | |
958 | return result; | |
959 | ||
960 | /* NOTE: seems like Microsoft and Apple don't bother verifying | |
961 | * the clear "took", so some devices could lock up if you check... | |
962 | * such as the Hagiwara FlashGate DUAL. So we won't bother. | |
963 | * | |
964 | * NOTE: make sure the logic here doesn't diverge much from | |
965 | * the copy in usb-storage, for as long as we need two copies. | |
966 | */ | |
967 | ||
968 | /* toggle was reset by the clear */ | |
969 | usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0); | |
970 | ||
971 | return 0; | |
972 | } | |
973 | ||
974 | /** | |
975 | * usb_disable_endpoint -- Disable an endpoint by address | |
976 | * @dev: the device whose endpoint is being disabled | |
977 | * @epaddr: the endpoint's address. Endpoint number for output, | |
978 | * endpoint number + USB_DIR_IN for input | |
979 | * | |
980 | * Deallocates hcd/hardware state for this endpoint ... and nukes all | |
981 | * pending urbs. | |
982 | * | |
983 | * If the HCD hasn't registered a disable() function, this sets the | |
984 | * endpoint's maxpacket size to 0 to prevent further submissions. | |
985 | */ | |
986 | void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) | |
987 | { | |
988 | unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; | |
989 | struct usb_host_endpoint *ep; | |
990 | ||
991 | if (!dev) | |
992 | return; | |
993 | ||
994 | if (usb_endpoint_out(epaddr)) { | |
995 | ep = dev->ep_out[epnum]; | |
996 | dev->ep_out[epnum] = NULL; | |
997 | } else { | |
998 | ep = dev->ep_in[epnum]; | |
999 | dev->ep_in[epnum] = NULL; | |
1000 | } | |
a6d2bb9f AS |
1001 | if (ep && dev->bus) |
1002 | usb_hcd_endpoint_disable(dev, ep); | |
1da177e4 LT |
1003 | } |
1004 | ||
1005 | /** | |
1006 | * usb_disable_interface -- Disable all endpoints for an interface | |
1007 | * @dev: the device whose interface is being disabled | |
1008 | * @intf: pointer to the interface descriptor | |
1009 | * | |
1010 | * Disables all the endpoints for the interface's current altsetting. | |
1011 | */ | |
1012 | void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf) | |
1013 | { | |
1014 | struct usb_host_interface *alt = intf->cur_altsetting; | |
1015 | int i; | |
1016 | ||
1017 | for (i = 0; i < alt->desc.bNumEndpoints; ++i) { | |
1018 | usb_disable_endpoint(dev, | |
1019 | alt->endpoint[i].desc.bEndpointAddress); | |
1020 | } | |
1021 | } | |
1022 | ||
1023 | /* | |
1024 | * usb_disable_device - Disable all the endpoints for a USB device | |
1025 | * @dev: the device whose endpoints are being disabled | |
1026 | * @skip_ep0: 0 to disable endpoint 0, 1 to skip it. | |
1027 | * | |
1028 | * Disables all the device's endpoints, potentially including endpoint 0. | |
1029 | * Deallocates hcd/hardware state for the endpoints (nuking all or most | |
1030 | * pending urbs) and usbcore state for the interfaces, so that usbcore | |
1031 | * must usb_set_configuration() before any interfaces could be used. | |
1032 | */ | |
1033 | void usb_disable_device(struct usb_device *dev, int skip_ep0) | |
1034 | { | |
1035 | int i; | |
1036 | ||
1037 | dev_dbg(&dev->dev, "%s nuking %s URBs\n", __FUNCTION__, | |
1038 | skip_ep0 ? "non-ep0" : "all"); | |
1039 | for (i = skip_ep0; i < 16; ++i) { | |
1040 | usb_disable_endpoint(dev, i); | |
1041 | usb_disable_endpoint(dev, i + USB_DIR_IN); | |
1042 | } | |
1043 | dev->toggle[0] = dev->toggle[1] = 0; | |
1044 | ||
1045 | /* getting rid of interfaces will disconnect | |
1046 | * any drivers bound to them (a key side effect) | |
1047 | */ | |
1048 | if (dev->actconfig) { | |
1049 | for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) { | |
1050 | struct usb_interface *interface; | |
1051 | ||
86d30741 | 1052 | /* remove this interface if it has been registered */ |
1da177e4 | 1053 | interface = dev->actconfig->interface[i]; |
d305ef5d | 1054 | if (!device_is_registered(&interface->dev)) |
86d30741 | 1055 | continue; |
1da177e4 LT |
1056 | dev_dbg (&dev->dev, "unregistering interface %s\n", |
1057 | interface->dev.bus_id); | |
1058 | usb_remove_sysfs_intf_files(interface); | |
1da177e4 LT |
1059 | device_del (&interface->dev); |
1060 | } | |
1061 | ||
1062 | /* Now that the interfaces are unbound, nobody should | |
1063 | * try to access them. | |
1064 | */ | |
1065 | for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) { | |
1066 | put_device (&dev->actconfig->interface[i]->dev); | |
1067 | dev->actconfig->interface[i] = NULL; | |
1068 | } | |
1069 | dev->actconfig = NULL; | |
1070 | if (dev->state == USB_STATE_CONFIGURED) | |
1071 | usb_set_device_state(dev, USB_STATE_ADDRESS); | |
1072 | } | |
1073 | } | |
1074 | ||
1075 | ||
1076 | /* | |
1077 | * usb_enable_endpoint - Enable an endpoint for USB communications | |
1078 | * @dev: the device whose interface is being enabled | |
1079 | * @ep: the endpoint | |
1080 | * | |
1081 | * Resets the endpoint toggle, and sets dev->ep_{in,out} pointers. | |
1082 | * For control endpoints, both the input and output sides are handled. | |
1083 | */ | |
1084 | static void | |
1085 | usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep) | |
1086 | { | |
1087 | unsigned int epaddr = ep->desc.bEndpointAddress; | |
1088 | unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; | |
1089 | int is_control; | |
1090 | ||
1091 | is_control = ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) | |
1092 | == USB_ENDPOINT_XFER_CONTROL); | |
1093 | if (usb_endpoint_out(epaddr) || is_control) { | |
1094 | usb_settoggle(dev, epnum, 1, 0); | |
1095 | dev->ep_out[epnum] = ep; | |
1096 | } | |
1097 | if (!usb_endpoint_out(epaddr) || is_control) { | |
1098 | usb_settoggle(dev, epnum, 0, 0); | |
1099 | dev->ep_in[epnum] = ep; | |
1100 | } | |
1101 | } | |
1102 | ||
1103 | /* | |
1104 | * usb_enable_interface - Enable all the endpoints for an interface | |
1105 | * @dev: the device whose interface is being enabled | |
1106 | * @intf: pointer to the interface descriptor | |
1107 | * | |
1108 | * Enables all the endpoints for the interface's current altsetting. | |
1109 | */ | |
1110 | static void usb_enable_interface(struct usb_device *dev, | |
1111 | struct usb_interface *intf) | |
1112 | { | |
1113 | struct usb_host_interface *alt = intf->cur_altsetting; | |
1114 | int i; | |
1115 | ||
1116 | for (i = 0; i < alt->desc.bNumEndpoints; ++i) | |
1117 | usb_enable_endpoint(dev, &alt->endpoint[i]); | |
1118 | } | |
1119 | ||
1120 | /** | |
1121 | * usb_set_interface - Makes a particular alternate setting be current | |
1122 | * @dev: the device whose interface is being updated | |
1123 | * @interface: the interface being updated | |
1124 | * @alternate: the setting being chosen. | |
1125 | * Context: !in_interrupt () | |
1126 | * | |
1127 | * This is used to enable data transfers on interfaces that may not | |
1128 | * be enabled by default. Not all devices support such configurability. | |
1129 | * Only the driver bound to an interface may change its setting. | |
1130 | * | |
1131 | * Within any given configuration, each interface may have several | |
1132 | * alternative settings. These are often used to control levels of | |
1133 | * bandwidth consumption. For example, the default setting for a high | |
1134 | * speed interrupt endpoint may not send more than 64 bytes per microframe, | |
1135 | * while interrupt transfers of up to 3KBytes per microframe are legal. | |
1136 | * Also, isochronous endpoints may never be part of an | |
1137 | * interface's default setting. To access such bandwidth, alternate | |
1138 | * interface settings must be made current. | |
1139 | * | |
1140 | * Note that in the Linux USB subsystem, bandwidth associated with | |
1141 | * an endpoint in a given alternate setting is not reserved until an URB | |
1142 | * is submitted that needs that bandwidth. Some other operating systems | |
1143 | * allocate bandwidth early, when a configuration is chosen. | |
1144 | * | |
1145 | * This call is synchronous, and may not be used in an interrupt context. | |
1146 | * Also, drivers must not change altsettings while urbs are scheduled for | |
1147 | * endpoints in that interface; all such urbs must first be completed | |
1148 | * (perhaps forced by unlinking). | |
1149 | * | |
1150 | * Returns zero on success, or else the status code returned by the | |
1151 | * underlying usb_control_msg() call. | |
1152 | */ | |
1153 | int usb_set_interface(struct usb_device *dev, int interface, int alternate) | |
1154 | { | |
1155 | struct usb_interface *iface; | |
1156 | struct usb_host_interface *alt; | |
1157 | int ret; | |
1158 | int manual = 0; | |
1159 | ||
1160 | if (dev->state == USB_STATE_SUSPENDED) | |
1161 | return -EHOSTUNREACH; | |
1162 | ||
1163 | iface = usb_ifnum_to_if(dev, interface); | |
1164 | if (!iface) { | |
1165 | dev_dbg(&dev->dev, "selecting invalid interface %d\n", | |
1166 | interface); | |
1167 | return -EINVAL; | |
1168 | } | |
1169 | ||
1170 | alt = usb_altnum_to_altsetting(iface, alternate); | |
1171 | if (!alt) { | |
1172 | warn("selecting invalid altsetting %d", alternate); | |
1173 | return -EINVAL; | |
1174 | } | |
1175 | ||
1176 | ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
1177 | USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE, | |
1178 | alternate, interface, NULL, 0, 5000); | |
1179 | ||
1180 | /* 9.4.10 says devices don't need this and are free to STALL the | |
1181 | * request if the interface only has one alternate setting. | |
1182 | */ | |
1183 | if (ret == -EPIPE && iface->num_altsetting == 1) { | |
1184 | dev_dbg(&dev->dev, | |
1185 | "manual set_interface for iface %d, alt %d\n", | |
1186 | interface, alternate); | |
1187 | manual = 1; | |
1188 | } else if (ret < 0) | |
1189 | return ret; | |
1190 | ||
1191 | /* FIXME drivers shouldn't need to replicate/bugfix the logic here | |
1192 | * when they implement async or easily-killable versions of this or | |
1193 | * other "should-be-internal" functions (like clear_halt). | |
1194 | * should hcd+usbcore postprocess control requests? | |
1195 | */ | |
1196 | ||
1197 | /* prevent submissions using previous endpoint settings */ | |
0e6c8e8d AS |
1198 | if (device_is_registered(&iface->dev)) |
1199 | usb_remove_sysfs_intf_files(iface); | |
1da177e4 LT |
1200 | usb_disable_interface(dev, iface); |
1201 | ||
1da177e4 LT |
1202 | iface->cur_altsetting = alt; |
1203 | ||
1204 | /* If the interface only has one altsetting and the device didn't | |
a81e7ecc | 1205 | * accept the request, we attempt to carry out the equivalent action |
1da177e4 LT |
1206 | * by manually clearing the HALT feature for each endpoint in the |
1207 | * new altsetting. | |
1208 | */ | |
1209 | if (manual) { | |
1210 | int i; | |
1211 | ||
1212 | for (i = 0; i < alt->desc.bNumEndpoints; i++) { | |
1213 | unsigned int epaddr = | |
1214 | alt->endpoint[i].desc.bEndpointAddress; | |
1215 | unsigned int pipe = | |
1216 | __create_pipe(dev, USB_ENDPOINT_NUMBER_MASK & epaddr) | |
1217 | | (usb_endpoint_out(epaddr) ? USB_DIR_OUT : USB_DIR_IN); | |
1218 | ||
1219 | usb_clear_halt(dev, pipe); | |
1220 | } | |
1221 | } | |
1222 | ||
1223 | /* 9.1.1.5: reset toggles for all endpoints in the new altsetting | |
1224 | * | |
1225 | * Note: | |
1226 | * Despite EP0 is always present in all interfaces/AS, the list of | |
1227 | * endpoints from the descriptor does not contain EP0. Due to its | |
1228 | * omnipresence one might expect EP0 being considered "affected" by | |
1229 | * any SetInterface request and hence assume toggles need to be reset. | |
1230 | * However, EP0 toggles are re-synced for every individual transfer | |
1231 | * during the SETUP stage - hence EP0 toggles are "don't care" here. | |
1232 | * (Likewise, EP0 never "halts" on well designed devices.) | |
1233 | */ | |
1234 | usb_enable_interface(dev, iface); | |
0e6c8e8d AS |
1235 | if (device_is_registered(&iface->dev)) |
1236 | usb_create_sysfs_intf_files(iface); | |
1da177e4 LT |
1237 | |
1238 | return 0; | |
1239 | } | |
1240 | ||
1241 | /** | |
1242 | * usb_reset_configuration - lightweight device reset | |
1243 | * @dev: the device whose configuration is being reset | |
1244 | * | |
1245 | * This issues a standard SET_CONFIGURATION request to the device using | |
1246 | * the current configuration. The effect is to reset most USB-related | |
1247 | * state in the device, including interface altsettings (reset to zero), | |
1248 | * endpoint halts (cleared), and data toggle (only for bulk and interrupt | |
1249 | * endpoints). Other usbcore state is unchanged, including bindings of | |
1250 | * usb device drivers to interfaces. | |
1251 | * | |
1252 | * Because this affects multiple interfaces, avoid using this with composite | |
1253 | * (multi-interface) devices. Instead, the driver for each interface may | |
a81e7ecc DB |
1254 | * use usb_set_interface() on the interfaces it claims. Be careful though; |
1255 | * some devices don't support the SET_INTERFACE request, and others won't | |
1256 | * reset all the interface state (notably data toggles). Resetting the whole | |
1da177e4 LT |
1257 | * configuration would affect other drivers' interfaces. |
1258 | * | |
1259 | * The caller must own the device lock. | |
1260 | * | |
1261 | * Returns zero on success, else a negative error code. | |
1262 | */ | |
1263 | int usb_reset_configuration(struct usb_device *dev) | |
1264 | { | |
1265 | int i, retval; | |
1266 | struct usb_host_config *config; | |
1267 | ||
1268 | if (dev->state == USB_STATE_SUSPENDED) | |
1269 | return -EHOSTUNREACH; | |
1270 | ||
1271 | /* caller must have locked the device and must own | |
1272 | * the usb bus readlock (so driver bindings are stable); | |
1273 | * calls during probe() are fine | |
1274 | */ | |
1275 | ||
1276 | for (i = 1; i < 16; ++i) { | |
1277 | usb_disable_endpoint(dev, i); | |
1278 | usb_disable_endpoint(dev, i + USB_DIR_IN); | |
1279 | } | |
1280 | ||
1281 | config = dev->actconfig; | |
1282 | retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
1283 | USB_REQ_SET_CONFIGURATION, 0, | |
1284 | config->desc.bConfigurationValue, 0, | |
1285 | NULL, 0, USB_CTRL_SET_TIMEOUT); | |
0e6c8e8d | 1286 | if (retval < 0) |
1da177e4 | 1287 | return retval; |
1da177e4 LT |
1288 | |
1289 | dev->toggle[0] = dev->toggle[1] = 0; | |
1290 | ||
1291 | /* re-init hc/hcd interface/endpoint state */ | |
1292 | for (i = 0; i < config->desc.bNumInterfaces; i++) { | |
1293 | struct usb_interface *intf = config->interface[i]; | |
1294 | struct usb_host_interface *alt; | |
1295 | ||
0e6c8e8d AS |
1296 | if (device_is_registered(&intf->dev)) |
1297 | usb_remove_sysfs_intf_files(intf); | |
1da177e4 LT |
1298 | alt = usb_altnum_to_altsetting(intf, 0); |
1299 | ||
1300 | /* No altsetting 0? We'll assume the first altsetting. | |
1301 | * We could use a GetInterface call, but if a device is | |
1302 | * so non-compliant that it doesn't have altsetting 0 | |
1303 | * then I wouldn't trust its reply anyway. | |
1304 | */ | |
1305 | if (!alt) | |
1306 | alt = &intf->altsetting[0]; | |
1307 | ||
1308 | intf->cur_altsetting = alt; | |
1309 | usb_enable_interface(dev, intf); | |
0e6c8e8d AS |
1310 | if (device_is_registered(&intf->dev)) |
1311 | usb_create_sysfs_intf_files(intf); | |
1da177e4 LT |
1312 | } |
1313 | return 0; | |
1314 | } | |
1315 | ||
9f8b17e6 | 1316 | void usb_release_interface(struct device *dev) |
1da177e4 LT |
1317 | { |
1318 | struct usb_interface *intf = to_usb_interface(dev); | |
1319 | struct usb_interface_cache *intfc = | |
1320 | altsetting_to_usb_interface_cache(intf->altsetting); | |
1321 | ||
1322 | kref_put(&intfc->ref, usb_release_interface_cache); | |
1323 | kfree(intf); | |
1324 | } | |
1325 | ||
9f8b17e6 KS |
1326 | #ifdef CONFIG_HOTPLUG |
1327 | static int usb_if_uevent(struct device *dev, char **envp, int num_envp, | |
1328 | char *buffer, int buffer_size) | |
1329 | { | |
1330 | struct usb_device *usb_dev; | |
1331 | struct usb_interface *intf; | |
1332 | struct usb_host_interface *alt; | |
1333 | int i = 0; | |
1334 | int length = 0; | |
1335 | ||
1336 | if (!dev) | |
1337 | return -ENODEV; | |
1338 | ||
1339 | /* driver is often null here; dev_dbg() would oops */ | |
1340 | pr_debug ("usb %s: uevent\n", dev->bus_id); | |
1341 | ||
1342 | intf = to_usb_interface(dev); | |
1343 | usb_dev = interface_to_usbdev(intf); | |
1344 | alt = intf->cur_altsetting; | |
1345 | ||
1346 | if (add_uevent_var(envp, num_envp, &i, | |
1347 | buffer, buffer_size, &length, | |
1348 | "INTERFACE=%d/%d/%d", | |
1349 | alt->desc.bInterfaceClass, | |
1350 | alt->desc.bInterfaceSubClass, | |
1351 | alt->desc.bInterfaceProtocol)) | |
1352 | return -ENOMEM; | |
1353 | ||
1354 | if (add_uevent_var(envp, num_envp, &i, | |
1355 | buffer, buffer_size, &length, | |
1356 | "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", | |
1357 | le16_to_cpu(usb_dev->descriptor.idVendor), | |
1358 | le16_to_cpu(usb_dev->descriptor.idProduct), | |
1359 | le16_to_cpu(usb_dev->descriptor.bcdDevice), | |
1360 | usb_dev->descriptor.bDeviceClass, | |
1361 | usb_dev->descriptor.bDeviceSubClass, | |
1362 | usb_dev->descriptor.bDeviceProtocol, | |
1363 | alt->desc.bInterfaceClass, | |
1364 | alt->desc.bInterfaceSubClass, | |
1365 | alt->desc.bInterfaceProtocol)) | |
1366 | return -ENOMEM; | |
1367 | ||
1368 | envp[i] = NULL; | |
1369 | return 0; | |
1370 | } | |
1371 | ||
1372 | #else | |
1373 | ||
1374 | static int usb_if_uevent(struct device *dev, char **envp, | |
1375 | int num_envp, char *buffer, int buffer_size) | |
1376 | { | |
1377 | return -ENODEV; | |
1378 | } | |
1379 | #endif /* CONFIG_HOTPLUG */ | |
1380 | ||
1381 | struct device_type usb_if_device_type = { | |
1382 | .name = "usb_interface", | |
1383 | .release = usb_release_interface, | |
1384 | .uevent = usb_if_uevent, | |
1385 | }; | |
1386 | ||
165fe97e CN |
1387 | static struct usb_interface_assoc_descriptor *find_iad(struct usb_device *dev, |
1388 | struct usb_host_config *config, | |
1389 | u8 inum) | |
1390 | { | |
1391 | struct usb_interface_assoc_descriptor *retval = NULL; | |
1392 | struct usb_interface_assoc_descriptor *intf_assoc; | |
1393 | int first_intf; | |
1394 | int last_intf; | |
1395 | int i; | |
1396 | ||
1397 | for (i = 0; (i < USB_MAXIADS && config->intf_assoc[i]); i++) { | |
1398 | intf_assoc = config->intf_assoc[i]; | |
1399 | if (intf_assoc->bInterfaceCount == 0) | |
1400 | continue; | |
1401 | ||
1402 | first_intf = intf_assoc->bFirstInterface; | |
1403 | last_intf = first_intf + (intf_assoc->bInterfaceCount - 1); | |
1404 | if (inum >= first_intf && inum <= last_intf) { | |
1405 | if (!retval) | |
1406 | retval = intf_assoc; | |
1407 | else | |
1408 | dev_err(&dev->dev, "Interface #%d referenced" | |
1409 | " by multiple IADs\n", inum); | |
1410 | } | |
1411 | } | |
1412 | ||
1413 | return retval; | |
1414 | } | |
1415 | ||
1416 | ||
1da177e4 LT |
1417 | /* |
1418 | * usb_set_configuration - Makes a particular device setting be current | |
1419 | * @dev: the device whose configuration is being updated | |
1420 | * @configuration: the configuration being chosen. | |
1421 | * Context: !in_interrupt(), caller owns the device lock | |
1422 | * | |
1423 | * This is used to enable non-default device modes. Not all devices | |
1424 | * use this kind of configurability; many devices only have one | |
1425 | * configuration. | |
1426 | * | |
3f141e2a AS |
1427 | * @configuration is the value of the configuration to be installed. |
1428 | * According to the USB spec (e.g. section 9.1.1.5), configuration values | |
1429 | * must be non-zero; a value of zero indicates that the device in | |
1430 | * unconfigured. However some devices erroneously use 0 as one of their | |
1431 | * configuration values. To help manage such devices, this routine will | |
1432 | * accept @configuration = -1 as indicating the device should be put in | |
1433 | * an unconfigured state. | |
1434 | * | |
1da177e4 LT |
1435 | * USB device configurations may affect Linux interoperability, |
1436 | * power consumption and the functionality available. For example, | |
1437 | * the default configuration is limited to using 100mA of bus power, | |
1438 | * so that when certain device functionality requires more power, | |
1439 | * and the device is bus powered, that functionality should be in some | |
1440 | * non-default device configuration. Other device modes may also be | |
1441 | * reflected as configuration options, such as whether two ISDN | |
1442 | * channels are available independently; and choosing between open | |
1443 | * standard device protocols (like CDC) or proprietary ones. | |
1444 | * | |
1445 | * Note that USB has an additional level of device configurability, | |
1446 | * associated with interfaces. That configurability is accessed using | |
1447 | * usb_set_interface(). | |
1448 | * | |
1449 | * This call is synchronous. The calling context must be able to sleep, | |
1450 | * must own the device lock, and must not hold the driver model's USB | |
341487a8 | 1451 | * bus mutex; usb device driver probe() methods cannot use this routine. |
1da177e4 LT |
1452 | * |
1453 | * Returns zero on success, or else the status code returned by the | |
093cf723 | 1454 | * underlying call that failed. On successful completion, each interface |
1da177e4 LT |
1455 | * in the original device configuration has been destroyed, and each one |
1456 | * in the new configuration has been probed by all relevant usb device | |
1457 | * drivers currently known to the kernel. | |
1458 | */ | |
1459 | int usb_set_configuration(struct usb_device *dev, int configuration) | |
1460 | { | |
1461 | int i, ret; | |
1462 | struct usb_host_config *cp = NULL; | |
1463 | struct usb_interface **new_interfaces = NULL; | |
1464 | int n, nintf; | |
1465 | ||
3f141e2a AS |
1466 | if (configuration == -1) |
1467 | configuration = 0; | |
1468 | else { | |
1469 | for (i = 0; i < dev->descriptor.bNumConfigurations; i++) { | |
1470 | if (dev->config[i].desc.bConfigurationValue == | |
1471 | configuration) { | |
1472 | cp = &dev->config[i]; | |
1473 | break; | |
1474 | } | |
1da177e4 LT |
1475 | } |
1476 | } | |
1477 | if ((!cp && configuration != 0)) | |
1478 | return -EINVAL; | |
1479 | ||
1480 | /* The USB spec says configuration 0 means unconfigured. | |
1481 | * But if a device includes a configuration numbered 0, | |
1482 | * we will accept it as a correctly configured state. | |
3f141e2a | 1483 | * Use -1 if you really want to unconfigure the device. |
1da177e4 LT |
1484 | */ |
1485 | if (cp && configuration == 0) | |
1486 | dev_warn(&dev->dev, "config 0 descriptor??\n"); | |
1487 | ||
1da177e4 LT |
1488 | /* Allocate memory for new interfaces before doing anything else, |
1489 | * so that if we run out then nothing will have changed. */ | |
1490 | n = nintf = 0; | |
1491 | if (cp) { | |
1492 | nintf = cp->desc.bNumInterfaces; | |
1493 | new_interfaces = kmalloc(nintf * sizeof(*new_interfaces), | |
1494 | GFP_KERNEL); | |
1495 | if (!new_interfaces) { | |
1496 | dev_err(&dev->dev, "Out of memory"); | |
1497 | return -ENOMEM; | |
1498 | } | |
1499 | ||
1500 | for (; n < nintf; ++n) { | |
0a1ef3b5 | 1501 | new_interfaces[n] = kzalloc( |
1da177e4 LT |
1502 | sizeof(struct usb_interface), |
1503 | GFP_KERNEL); | |
1504 | if (!new_interfaces[n]) { | |
1505 | dev_err(&dev->dev, "Out of memory"); | |
1506 | ret = -ENOMEM; | |
1507 | free_interfaces: | |
1508 | while (--n >= 0) | |
1509 | kfree(new_interfaces[n]); | |
1510 | kfree(new_interfaces); | |
1511 | return ret; | |
1512 | } | |
1513 | } | |
1da177e4 | 1514 | |
f48219db HS |
1515 | i = dev->bus_mA - cp->desc.bMaxPower * 2; |
1516 | if (i < 0) | |
1517 | dev_warn(&dev->dev, "new config #%d exceeds power " | |
1518 | "limit by %dmA\n", | |
1519 | configuration, -i); | |
1520 | } | |
55c52718 | 1521 | |
01d883d4 | 1522 | /* Wake up the device so we can send it the Set-Config request */ |
94fcda1f | 1523 | ret = usb_autoresume_device(dev); |
01d883d4 AS |
1524 | if (ret) |
1525 | goto free_interfaces; | |
1526 | ||
6ad07129 AS |
1527 | /* if it's already configured, clear out old state first. |
1528 | * getting rid of old interfaces means unbinding their drivers. | |
1529 | */ | |
1530 | if (dev->state != USB_STATE_ADDRESS) | |
1531 | usb_disable_device (dev, 1); // Skip ep0 | |
1532 | ||
1da177e4 LT |
1533 | if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
1534 | USB_REQ_SET_CONFIGURATION, 0, configuration, 0, | |
6ad07129 AS |
1535 | NULL, 0, USB_CTRL_SET_TIMEOUT)) < 0) { |
1536 | ||
1537 | /* All the old state is gone, so what else can we do? | |
1538 | * The device is probably useless now anyway. | |
1539 | */ | |
1540 | cp = NULL; | |
1541 | } | |
1da177e4 LT |
1542 | |
1543 | dev->actconfig = cp; | |
6ad07129 | 1544 | if (!cp) { |
1da177e4 | 1545 | usb_set_device_state(dev, USB_STATE_ADDRESS); |
94fcda1f | 1546 | usb_autosuspend_device(dev); |
6ad07129 AS |
1547 | goto free_interfaces; |
1548 | } | |
1549 | usb_set_device_state(dev, USB_STATE_CONFIGURED); | |
1da177e4 | 1550 | |
6ad07129 AS |
1551 | /* Initialize the new interface structures and the |
1552 | * hc/hcd/usbcore interface/endpoint state. | |
1553 | */ | |
1554 | for (i = 0; i < nintf; ++i) { | |
1555 | struct usb_interface_cache *intfc; | |
1556 | struct usb_interface *intf; | |
1557 | struct usb_host_interface *alt; | |
1da177e4 | 1558 | |
6ad07129 AS |
1559 | cp->interface[i] = intf = new_interfaces[i]; |
1560 | intfc = cp->intf_cache[i]; | |
1561 | intf->altsetting = intfc->altsetting; | |
1562 | intf->num_altsetting = intfc->num_altsetting; | |
165fe97e | 1563 | intf->intf_assoc = find_iad(dev, cp, i); |
6ad07129 | 1564 | kref_get(&intfc->ref); |
1da177e4 | 1565 | |
6ad07129 AS |
1566 | alt = usb_altnum_to_altsetting(intf, 0); |
1567 | ||
1568 | /* No altsetting 0? We'll assume the first altsetting. | |
1569 | * We could use a GetInterface call, but if a device is | |
1570 | * so non-compliant that it doesn't have altsetting 0 | |
1571 | * then I wouldn't trust its reply anyway. | |
1da177e4 | 1572 | */ |
6ad07129 AS |
1573 | if (!alt) |
1574 | alt = &intf->altsetting[0]; | |
1575 | ||
1576 | intf->cur_altsetting = alt; | |
1577 | usb_enable_interface(dev, intf); | |
1578 | intf->dev.parent = &dev->dev; | |
1579 | intf->dev.driver = NULL; | |
1580 | intf->dev.bus = &usb_bus_type; | |
9f8b17e6 | 1581 | intf->dev.type = &usb_if_device_type; |
6ad07129 | 1582 | intf->dev.dma_mask = dev->dev.dma_mask; |
6ad07129 AS |
1583 | device_initialize (&intf->dev); |
1584 | mark_quiesced(intf); | |
1585 | sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d", | |
1586 | dev->bus->busnum, dev->devpath, | |
1587 | configuration, alt->desc.bInterfaceNumber); | |
1588 | } | |
1589 | kfree(new_interfaces); | |
1590 | ||
1591 | if (cp->string == NULL) | |
1592 | cp->string = usb_cache_string(dev, cp->desc.iConfiguration); | |
1593 | ||
1594 | /* Now that all the interfaces are set up, register them | |
1595 | * to trigger binding of drivers to interfaces. probe() | |
1596 | * routines may install different altsettings and may | |
1597 | * claim() any interfaces not yet bound. Many class drivers | |
1598 | * need that: CDC, audio, video, etc. | |
1599 | */ | |
1600 | for (i = 0; i < nintf; ++i) { | |
1601 | struct usb_interface *intf = cp->interface[i]; | |
1602 | ||
1603 | dev_dbg (&dev->dev, | |
1604 | "adding %s (config #%d, interface %d)\n", | |
1605 | intf->dev.bus_id, configuration, | |
1606 | intf->cur_altsetting->desc.bInterfaceNumber); | |
1607 | ret = device_add (&intf->dev); | |
1608 | if (ret != 0) { | |
1609 | dev_err(&dev->dev, "device_add(%s) --> %d\n", | |
1610 | intf->dev.bus_id, ret); | |
1611 | continue; | |
1da177e4 | 1612 | } |
6ad07129 | 1613 | usb_create_sysfs_intf_files (intf); |
1da177e4 LT |
1614 | } |
1615 | ||
94fcda1f | 1616 | usb_autosuspend_device(dev); |
86d30741 | 1617 | return 0; |
1da177e4 LT |
1618 | } |
1619 | ||
088dc270 AS |
1620 | struct set_config_request { |
1621 | struct usb_device *udev; | |
1622 | int config; | |
1623 | struct work_struct work; | |
1624 | }; | |
1625 | ||
1626 | /* Worker routine for usb_driver_set_configuration() */ | |
c4028958 | 1627 | static void driver_set_config_work(struct work_struct *work) |
088dc270 | 1628 | { |
c4028958 DH |
1629 | struct set_config_request *req = |
1630 | container_of(work, struct set_config_request, work); | |
088dc270 AS |
1631 | |
1632 | usb_lock_device(req->udev); | |
1633 | usb_set_configuration(req->udev, req->config); | |
1634 | usb_unlock_device(req->udev); | |
1635 | usb_put_dev(req->udev); | |
1636 | kfree(req); | |
1637 | } | |
1638 | ||
1639 | /** | |
1640 | * usb_driver_set_configuration - Provide a way for drivers to change device configurations | |
1641 | * @udev: the device whose configuration is being updated | |
1642 | * @config: the configuration being chosen. | |
1643 | * Context: In process context, must be able to sleep | |
1644 | * | |
1645 | * Device interface drivers are not allowed to change device configurations. | |
1646 | * This is because changing configurations will destroy the interface the | |
1647 | * driver is bound to and create new ones; it would be like a floppy-disk | |
1648 | * driver telling the computer to replace the floppy-disk drive with a | |
1649 | * tape drive! | |
1650 | * | |
1651 | * Still, in certain specialized circumstances the need may arise. This | |
1652 | * routine gets around the normal restrictions by using a work thread to | |
1653 | * submit the change-config request. | |
1654 | * | |
1655 | * Returns 0 if the request was succesfully queued, error code otherwise. | |
1656 | * The caller has no way to know whether the queued request will eventually | |
1657 | * succeed. | |
1658 | */ | |
1659 | int usb_driver_set_configuration(struct usb_device *udev, int config) | |
1660 | { | |
1661 | struct set_config_request *req; | |
1662 | ||
1663 | req = kmalloc(sizeof(*req), GFP_KERNEL); | |
1664 | if (!req) | |
1665 | return -ENOMEM; | |
1666 | req->udev = udev; | |
1667 | req->config = config; | |
c4028958 | 1668 | INIT_WORK(&req->work, driver_set_config_work); |
088dc270 AS |
1669 | |
1670 | usb_get_dev(udev); | |
1737bf2c | 1671 | schedule_work(&req->work); |
088dc270 AS |
1672 | return 0; |
1673 | } | |
1674 | EXPORT_SYMBOL_GPL(usb_driver_set_configuration); | |
1675 | ||
1da177e4 LT |
1676 | // synchronous request completion model |
1677 | EXPORT_SYMBOL(usb_control_msg); | |
1678 | EXPORT_SYMBOL(usb_bulk_msg); | |
1679 | ||
1680 | EXPORT_SYMBOL(usb_sg_init); | |
1681 | EXPORT_SYMBOL(usb_sg_cancel); | |
1682 | EXPORT_SYMBOL(usb_sg_wait); | |
1683 | ||
1684 | // synchronous control message convenience routines | |
1685 | EXPORT_SYMBOL(usb_get_descriptor); | |
1686 | EXPORT_SYMBOL(usb_get_status); | |
1da177e4 LT |
1687 | EXPORT_SYMBOL(usb_string); |
1688 | ||
1689 | // synchronous calls that also maintain usbcore state | |
1690 | EXPORT_SYMBOL(usb_clear_halt); | |
1691 | EXPORT_SYMBOL(usb_reset_configuration); | |
1692 | EXPORT_SYMBOL(usb_set_interface); | |
1693 |