Commit | Line | Data |
---|---|---|
91777826 JW |
1 | /* |
2 | * Standalone EHCI usb debug driver | |
3 | * | |
4 | * Originally written by: | |
5 | * Eric W. Biederman" <ebiederm@xmission.com> and | |
6 | * Yinghai Lu <yhlu.kernel@gmail.com> | |
7 | * | |
8 | * Changes for early/late printk and HW errata: | |
9 | * Jason Wessel <jason.wessel@windriver.com> | |
10 | * Copyright (C) 2009 Wind River Systems, Inc. | |
11 | * | |
12 | */ | |
13 | ||
df6c5169 JW |
14 | #include <linux/console.h> |
15 | #include <linux/errno.h> | |
91777826 | 16 | #include <linux/module.h> |
df6c5169 JW |
17 | #include <linux/pci_regs.h> |
18 | #include <linux/pci_ids.h> | |
19 | #include <linux/usb/ch9.h> | |
20 | #include <linux/usb/ehci_def.h> | |
21 | #include <linux/delay.h> | |
4fe1da4e | 22 | #include <linux/serial_core.h> |
86effe59 | 23 | #include <linux/kconfig.h> |
4fe1da4e JW |
24 | #include <linux/kgdb.h> |
25 | #include <linux/kthread.h> | |
df6c5169 JW |
26 | #include <asm/io.h> |
27 | #include <asm/pci-direct.h> | |
28 | #include <asm/fixmap.h> | |
29 | ||
91777826 JW |
30 | /* The code here is intended to talk directly to the EHCI debug port |
31 | * and does not require that you have any kind of USB host controller | |
32 | * drivers or USB device drivers compiled into the kernel. | |
33 | * | |
34 | * If you make a change to anything in here, the following test cases | |
35 | * need to pass where a USB debug device works in the following | |
36 | * configurations. | |
37 | * | |
38 | * 1. boot args: earlyprintk=dbgp | |
39 | * o kernel compiled with # CONFIG_USB_EHCI_HCD is not set | |
40 | * o kernel compiled with CONFIG_USB_EHCI_HCD=y | |
41 | * 2. boot args: earlyprintk=dbgp,keep | |
42 | * o kernel compiled with # CONFIG_USB_EHCI_HCD is not set | |
43 | * o kernel compiled with CONFIG_USB_EHCI_HCD=y | |
44 | * 3. boot args: earlyprintk=dbgp console=ttyUSB0 | |
45 | * o kernel has CONFIG_USB_EHCI_HCD=y and | |
46 | * CONFIG_USB_SERIAL_DEBUG=y | |
47 | * 4. boot args: earlyprintk=vga,dbgp | |
48 | * o kernel compiled with # CONFIG_USB_EHCI_HCD is not set | |
49 | * o kernel compiled with CONFIG_USB_EHCI_HCD=y | |
50 | * | |
51 | * For the 4th configuration you can turn on or off the DBGP_DEBUG | |
52 | * such that you can debug the dbgp device's driver code. | |
53 | */ | |
54 | ||
55 | static int dbgp_phys_port = 1; | |
56faf0f9 | 56 | |
df6c5169 JW |
57 | static struct ehci_caps __iomem *ehci_caps; |
58 | static struct ehci_regs __iomem *ehci_regs; | |
59 | static struct ehci_dbg_port __iomem *ehci_debug; | |
91777826 | 60 | static int dbgp_not_safe; /* Cannot use debug device during ehci reset */ |
df6c5169 | 61 | static unsigned int dbgp_endpoint_out; |
4fe1da4e | 62 | static unsigned int dbgp_endpoint_in; |
df6c5169 JW |
63 | |
64 | struct ehci_dev { | |
65 | u32 bus; | |
66 | u32 slot; | |
67 | u32 func; | |
68 | }; | |
69 | ||
70 | static struct ehci_dev ehci_dev; | |
71 | ||
72 | #define USB_DEBUG_DEVNUM 127 | |
73 | ||
91777826 JW |
74 | #ifdef DBGP_DEBUG |
75 | #define dbgp_printk printk | |
76 | static void dbgp_ehci_status(char *str) | |
77 | { | |
78 | if (!ehci_debug) | |
79 | return; | |
80 | dbgp_printk("dbgp: %s\n", str); | |
81 | dbgp_printk(" Debug control: %08x", readl(&ehci_debug->control)); | |
82 | dbgp_printk(" ehci cmd : %08x", readl(&ehci_regs->command)); | |
83 | dbgp_printk(" ehci conf flg: %08x\n", | |
84 | readl(&ehci_regs->configured_flag)); | |
85 | dbgp_printk(" ehci status : %08x", readl(&ehci_regs->status)); | |
86 | dbgp_printk(" ehci portsc : %08x\n", | |
87 | readl(&ehci_regs->port_status[dbgp_phys_port - 1])); | |
88 | } | |
89 | #else | |
90 | static inline void dbgp_ehci_status(char *str) { } | |
91 | static inline void dbgp_printk(const char *fmt, ...) { } | |
92 | #endif | |
93 | ||
df6c5169 JW |
94 | static inline u32 dbgp_len_update(u32 x, u32 len) |
95 | { | |
96 | return (x & ~0x0f) | (len & 0x0f); | |
97 | } | |
98 | ||
4fe1da4e JW |
99 | #ifdef CONFIG_KGDB |
100 | static struct kgdb_io kgdbdbgp_io_ops; | |
101 | #define dbgp_kgdb_mode (dbg_io_ops == &kgdbdbgp_io_ops) | |
102 | #else | |
103 | #define dbgp_kgdb_mode (0) | |
104 | #endif | |
105 | ||
c430131a JA |
106 | /* Local version of HC_LENGTH macro as ehci struct is not available here */ |
107 | #define EARLY_HC_LENGTH(p) (0x00ff & (p)) /* bits 7 : 0 */ | |
108 | ||
df6c5169 JW |
109 | /* |
110 | * USB Packet IDs (PIDs) | |
111 | */ | |
112 | ||
113 | /* token */ | |
114 | #define USB_PID_OUT 0xe1 | |
115 | #define USB_PID_IN 0x69 | |
116 | #define USB_PID_SOF 0xa5 | |
117 | #define USB_PID_SETUP 0x2d | |
118 | /* handshake */ | |
119 | #define USB_PID_ACK 0xd2 | |
120 | #define USB_PID_NAK 0x5a | |
121 | #define USB_PID_STALL 0x1e | |
122 | #define USB_PID_NYET 0x96 | |
123 | /* data */ | |
124 | #define USB_PID_DATA0 0xc3 | |
125 | #define USB_PID_DATA1 0x4b | |
126 | #define USB_PID_DATA2 0x87 | |
127 | #define USB_PID_MDATA 0x0f | |
128 | /* Special */ | |
129 | #define USB_PID_PREAMBLE 0x3c | |
130 | #define USB_PID_ERR 0x3c | |
131 | #define USB_PID_SPLIT 0x78 | |
132 | #define USB_PID_PING 0xb4 | |
133 | #define USB_PID_UNDEF_0 0xf0 | |
134 | ||
135 | #define USB_PID_DATA_TOGGLE 0x88 | |
136 | #define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE) | |
137 | ||
138 | #define PCI_CAP_ID_EHCI_DEBUG 0xa | |
139 | ||
140 | #define HUB_ROOT_RESET_TIME 50 /* times are in msec */ | |
141 | #define HUB_SHORT_RESET_TIME 10 | |
142 | #define HUB_LONG_RESET_TIME 200 | |
143 | #define HUB_RESET_TIMEOUT 500 | |
144 | ||
145 | #define DBGP_MAX_PACKET 8 | |
91777826 | 146 | #define DBGP_TIMEOUT (250 * 1000) |
815e173e JW |
147 | #define DBGP_LOOPS 1000 |
148 | ||
149 | static inline u32 dbgp_pid_write_update(u32 x, u32 tok) | |
150 | { | |
151 | static int data0 = USB_PID_DATA1; | |
152 | data0 ^= USB_PID_DATA_TOGGLE; | |
153 | return (x & 0xffff0000) | (data0 << 8) | (tok & 0xff); | |
154 | } | |
155 | ||
156 | static inline u32 dbgp_pid_read_update(u32 x, u32 tok) | |
157 | { | |
158 | return (x & 0xffff0000) | (USB_PID_DATA0 << 8) | (tok & 0xff); | |
159 | } | |
df6c5169 JW |
160 | |
161 | static int dbgp_wait_until_complete(void) | |
162 | { | |
163 | u32 ctrl; | |
91777826 | 164 | int loop = DBGP_TIMEOUT; |
df6c5169 JW |
165 | |
166 | do { | |
167 | ctrl = readl(&ehci_debug->control); | |
168 | /* Stop when the transaction is finished */ | |
169 | if (ctrl & DBGP_DONE) | |
170 | break; | |
91777826 | 171 | udelay(1); |
df6c5169 JW |
172 | } while (--loop > 0); |
173 | ||
174 | if (!loop) | |
91777826 | 175 | return -DBGP_TIMEOUT; |
df6c5169 JW |
176 | |
177 | /* | |
178 | * Now that we have observed the completed transaction, | |
179 | * clear the done bit. | |
180 | */ | |
181 | writel(ctrl | DBGP_DONE, &ehci_debug->control); | |
182 | return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl); | |
183 | } | |
184 | ||
91777826 | 185 | static inline void dbgp_mdelay(int ms) |
df6c5169 JW |
186 | { |
187 | int i; | |
188 | ||
189 | while (ms--) { | |
190 | for (i = 0; i < 1000; i++) | |
191 | outb(0x1, 0x80); | |
192 | } | |
193 | } | |
194 | ||
195 | static void dbgp_breath(void) | |
196 | { | |
197 | /* Sleep to give the debug port a chance to breathe */ | |
198 | } | |
199 | ||
4fe1da4e | 200 | static int dbgp_wait_until_done(unsigned ctrl, int loop) |
df6c5169 JW |
201 | { |
202 | u32 pids, lpid; | |
203 | int ret; | |
df6c5169 JW |
204 | |
205 | retry: | |
206 | writel(ctrl | DBGP_GO, &ehci_debug->control); | |
207 | ret = dbgp_wait_until_complete(); | |
208 | pids = readl(&ehci_debug->pids); | |
209 | lpid = DBGP_PID_GET(pids); | |
210 | ||
91777826 JW |
211 | if (ret < 0) { |
212 | /* A -DBGP_TIMEOUT failure here means the device has | |
213 | * failed, perhaps because it was unplugged, in which | |
214 | * case we do not want to hang the system so the dbgp | |
215 | * will be marked as unsafe to use. EHCI reset is the | |
216 | * only way to recover if you unplug the dbgp device. | |
217 | */ | |
218 | if (ret == -DBGP_TIMEOUT && !dbgp_not_safe) | |
219 | dbgp_not_safe = 1; | |
815e173e JW |
220 | if (ret == -DBGP_ERR_BAD && --loop > 0) |
221 | goto retry; | |
df6c5169 | 222 | return ret; |
91777826 | 223 | } |
df6c5169 JW |
224 | |
225 | /* | |
226 | * If the port is getting full or it has dropped data | |
227 | * start pacing ourselves, not necessary but it's friendly. | |
228 | */ | |
229 | if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET)) | |
230 | dbgp_breath(); | |
231 | ||
232 | /* If I get a NACK reissue the transmission */ | |
233 | if (lpid == USB_PID_NAK) { | |
234 | if (--loop > 0) | |
235 | goto retry; | |
236 | } | |
237 | ||
238 | return ret; | |
239 | } | |
240 | ||
91777826 | 241 | static inline void dbgp_set_data(const void *buf, int size) |
df6c5169 JW |
242 | { |
243 | const unsigned char *bytes = buf; | |
244 | u32 lo, hi; | |
245 | int i; | |
246 | ||
247 | lo = hi = 0; | |
248 | for (i = 0; i < 4 && i < size; i++) | |
249 | lo |= bytes[i] << (8*i); | |
250 | for (; i < 8 && i < size; i++) | |
251 | hi |= bytes[i] << (8*(i - 4)); | |
252 | writel(lo, &ehci_debug->data03); | |
253 | writel(hi, &ehci_debug->data47); | |
254 | } | |
255 | ||
91777826 | 256 | static inline void dbgp_get_data(void *buf, int size) |
df6c5169 JW |
257 | { |
258 | unsigned char *bytes = buf; | |
259 | u32 lo, hi; | |
260 | int i; | |
261 | ||
262 | lo = readl(&ehci_debug->data03); | |
263 | hi = readl(&ehci_debug->data47); | |
264 | for (i = 0; i < 4 && i < size; i++) | |
265 | bytes[i] = (lo >> (8*i)) & 0xff; | |
266 | for (; i < 8 && i < size; i++) | |
267 | bytes[i] = (hi >> (8*(i - 4))) & 0xff; | |
268 | } | |
269 | ||
815e173e JW |
270 | static int dbgp_bulk_write(unsigned devnum, unsigned endpoint, |
271 | const char *bytes, int size) | |
df6c5169 | 272 | { |
815e173e JW |
273 | int ret; |
274 | u32 addr; | |
68d2956a | 275 | u32 pids, ctrl; |
df6c5169 | 276 | |
815e173e JW |
277 | if (size > DBGP_MAX_PACKET) |
278 | return -1; | |
279 | ||
280 | addr = DBGP_EPADDR(devnum, endpoint); | |
281 | ||
df6c5169 | 282 | pids = readl(&ehci_debug->pids); |
815e173e | 283 | pids = dbgp_pid_write_update(pids, USB_PID_OUT); |
df6c5169 JW |
284 | |
285 | ctrl = readl(&ehci_debug->control); | |
286 | ctrl = dbgp_len_update(ctrl, size); | |
287 | ctrl |= DBGP_OUT; | |
288 | ctrl |= DBGP_GO; | |
289 | ||
290 | dbgp_set_data(bytes, size); | |
291 | writel(addr, &ehci_debug->address); | |
292 | writel(pids, &ehci_debug->pids); | |
4fe1da4e | 293 | ret = dbgp_wait_until_done(ctrl, DBGP_LOOPS); |
df6c5169 JW |
294 | |
295 | return ret; | |
296 | } | |
297 | ||
91777826 | 298 | static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data, |
4fe1da4e | 299 | int size, int loops) |
df6c5169 JW |
300 | { |
301 | u32 pids, addr, ctrl; | |
302 | int ret; | |
303 | ||
304 | if (size > DBGP_MAX_PACKET) | |
305 | return -1; | |
306 | ||
307 | addr = DBGP_EPADDR(devnum, endpoint); | |
308 | ||
309 | pids = readl(&ehci_debug->pids); | |
815e173e | 310 | pids = dbgp_pid_read_update(pids, USB_PID_IN); |
df6c5169 JW |
311 | |
312 | ctrl = readl(&ehci_debug->control); | |
313 | ctrl = dbgp_len_update(ctrl, size); | |
314 | ctrl &= ~DBGP_OUT; | |
315 | ctrl |= DBGP_GO; | |
316 | ||
317 | writel(addr, &ehci_debug->address); | |
318 | writel(pids, &ehci_debug->pids); | |
4fe1da4e | 319 | ret = dbgp_wait_until_done(ctrl, loops); |
df6c5169 JW |
320 | if (ret < 0) |
321 | return ret; | |
322 | ||
323 | if (size > ret) | |
324 | size = ret; | |
325 | dbgp_get_data(data, size); | |
326 | return ret; | |
327 | } | |
328 | ||
91777826 | 329 | static int dbgp_control_msg(unsigned devnum, int requesttype, |
df6c5169 JW |
330 | int request, int value, int index, void *data, int size) |
331 | { | |
332 | u32 pids, addr, ctrl; | |
333 | struct usb_ctrlrequest req; | |
334 | int read; | |
335 | int ret; | |
336 | ||
337 | read = (requesttype & USB_DIR_IN) != 0; | |
4d4847b8 | 338 | if (size > (read ? DBGP_MAX_PACKET : 0)) |
df6c5169 JW |
339 | return -1; |
340 | ||
341 | /* Compute the control message */ | |
342 | req.bRequestType = requesttype; | |
343 | req.bRequest = request; | |
344 | req.wValue = cpu_to_le16(value); | |
345 | req.wIndex = cpu_to_le16(index); | |
346 | req.wLength = cpu_to_le16(size); | |
347 | ||
348 | pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP); | |
349 | addr = DBGP_EPADDR(devnum, 0); | |
350 | ||
351 | ctrl = readl(&ehci_debug->control); | |
352 | ctrl = dbgp_len_update(ctrl, sizeof(req)); | |
353 | ctrl |= DBGP_OUT; | |
354 | ctrl |= DBGP_GO; | |
355 | ||
356 | /* Send the setup message */ | |
357 | dbgp_set_data(&req, sizeof(req)); | |
358 | writel(addr, &ehci_debug->address); | |
359 | writel(pids, &ehci_debug->pids); | |
4fe1da4e | 360 | ret = dbgp_wait_until_done(ctrl, DBGP_LOOPS); |
df6c5169 JW |
361 | if (ret < 0) |
362 | return ret; | |
363 | ||
364 | /* Read the result */ | |
4fe1da4e | 365 | return dbgp_bulk_read(devnum, 0, data, size, DBGP_LOOPS); |
df6c5169 JW |
366 | } |
367 | ||
df6c5169 JW |
368 | /* Find a PCI capability */ |
369 | static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap) | |
370 | { | |
371 | u8 pos; | |
372 | int bytes; | |
373 | ||
374 | if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & | |
375 | PCI_STATUS_CAP_LIST)) | |
376 | return 0; | |
377 | ||
378 | pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); | |
379 | for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { | |
380 | u8 id; | |
381 | ||
382 | pos &= ~3; | |
383 | id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); | |
384 | if (id == 0xff) | |
385 | break; | |
386 | if (id == cap) | |
387 | return pos; | |
388 | ||
389 | pos = read_pci_config_byte(num, slot, func, | |
390 | pos+PCI_CAP_LIST_NEXT); | |
391 | } | |
392 | return 0; | |
393 | } | |
394 | ||
395 | static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func) | |
396 | { | |
397 | u32 class; | |
398 | ||
399 | class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); | |
400 | if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI) | |
401 | return 0; | |
402 | ||
403 | return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG); | |
404 | } | |
405 | ||
406 | static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc) | |
407 | { | |
408 | u32 bus, slot, func; | |
409 | ||
410 | for (bus = 0; bus < 256; bus++) { | |
411 | for (slot = 0; slot < 32; slot++) { | |
412 | for (func = 0; func < 8; func++) { | |
413 | unsigned cap; | |
414 | ||
415 | cap = __find_dbgp(bus, slot, func); | |
416 | ||
417 | if (!cap) | |
418 | continue; | |
419 | if (ehci_num-- != 0) | |
420 | continue; | |
421 | *rbus = bus; | |
422 | *rslot = slot; | |
423 | *rfunc = func; | |
424 | return cap; | |
425 | } | |
426 | } | |
427 | } | |
428 | return 0; | |
429 | } | |
430 | ||
91777826 JW |
431 | static int dbgp_ehci_startup(void) |
432 | { | |
433 | u32 ctrl, cmd, status; | |
434 | int loop; | |
435 | ||
436 | /* Claim ownership, but do not enable yet */ | |
437 | ctrl = readl(&ehci_debug->control); | |
438 | ctrl |= DBGP_OWNER; | |
439 | ctrl &= ~(DBGP_ENABLED | DBGP_INUSE); | |
440 | writel(ctrl, &ehci_debug->control); | |
441 | udelay(1); | |
442 | ||
443 | dbgp_ehci_status("EHCI startup"); | |
444 | /* Start the ehci running */ | |
445 | cmd = readl(&ehci_regs->command); | |
446 | cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET); | |
447 | cmd |= CMD_RUN; | |
448 | writel(cmd, &ehci_regs->command); | |
449 | ||
450 | /* Ensure everything is routed to the EHCI */ | |
451 | writel(FLAG_CF, &ehci_regs->configured_flag); | |
452 | ||
453 | /* Wait until the controller is no longer halted */ | |
f96a4216 | 454 | loop = 1000; |
91777826 JW |
455 | do { |
456 | status = readl(&ehci_regs->status); | |
457 | if (!(status & STS_HALT)) | |
458 | break; | |
459 | udelay(1); | |
460 | } while (--loop > 0); | |
461 | ||
462 | if (!loop) { | |
463 | dbgp_printk("ehci can not be started\n"); | |
464 | return -ENODEV; | |
465 | } | |
466 | dbgp_printk("ehci started\n"); | |
467 | return 0; | |
468 | } | |
469 | ||
470 | static int dbgp_ehci_controller_reset(void) | |
471 | { | |
472 | int loop = 250 * 1000; | |
473 | u32 cmd; | |
474 | ||
475 | /* Reset the EHCI controller */ | |
476 | cmd = readl(&ehci_regs->command); | |
477 | cmd |= CMD_RESET; | |
478 | writel(cmd, &ehci_regs->command); | |
479 | do { | |
480 | cmd = readl(&ehci_regs->command); | |
481 | } while ((cmd & CMD_RESET) && (--loop > 0)); | |
482 | ||
483 | if (!loop) { | |
484 | dbgp_printk("can not reset ehci\n"); | |
485 | return -1; | |
486 | } | |
487 | dbgp_ehci_status("ehci reset done"); | |
488 | return 0; | |
489 | } | |
490 | static int ehci_wait_for_port(int port); | |
491 | /* Return 0 on success | |
492 | * Return -ENODEV for any general failure | |
493 | * Return -EIO if wait for port fails | |
494 | */ | |
9fa5780b | 495 | static int _dbgp_external_startup(void) |
91777826 JW |
496 | { |
497 | int devnum; | |
498 | struct usb_debug_descriptor dbgp_desc; | |
499 | int ret; | |
aab2d408 | 500 | u32 ctrl, portsc, cmd; |
91777826 JW |
501 | int dbg_port = dbgp_phys_port; |
502 | int tries = 3; | |
aab2d408 JW |
503 | int reset_port_tries = 1; |
504 | int try_hard_once = 1; | |
91777826 | 505 | |
aab2d408 | 506 | try_port_reset_again: |
91777826 JW |
507 | ret = dbgp_ehci_startup(); |
508 | if (ret) | |
509 | return ret; | |
510 | ||
511 | /* Wait for a device to show up in the debug port */ | |
512 | ret = ehci_wait_for_port(dbg_port); | |
513 | if (ret < 0) { | |
514 | portsc = readl(&ehci_regs->port_status[dbg_port - 1]); | |
aab2d408 JW |
515 | if (!(portsc & PORT_CONNECT) && try_hard_once) { |
516 | /* Last ditch effort to try to force enable | |
517 | * the debug device by using the packet test | |
518 | * ehci command to try and wake it up. */ | |
519 | try_hard_once = 0; | |
520 | cmd = readl(&ehci_regs->command); | |
521 | cmd &= ~CMD_RUN; | |
522 | writel(cmd, &ehci_regs->command); | |
523 | portsc = readl(&ehci_regs->port_status[dbg_port - 1]); | |
524 | portsc |= PORT_TEST_PKT; | |
525 | writel(portsc, &ehci_regs->port_status[dbg_port - 1]); | |
526 | dbgp_ehci_status("Trying to force debug port online"); | |
527 | mdelay(50); | |
528 | dbgp_ehci_controller_reset(); | |
529 | goto try_port_reset_again; | |
530 | } else if (reset_port_tries--) { | |
531 | goto try_port_reset_again; | |
532 | } | |
91777826 JW |
533 | dbgp_printk("No device found in debug port\n"); |
534 | return -EIO; | |
535 | } | |
536 | dbgp_ehci_status("wait for port done"); | |
537 | ||
538 | /* Enable the debug port */ | |
539 | ctrl = readl(&ehci_debug->control); | |
540 | ctrl |= DBGP_CLAIM; | |
541 | writel(ctrl, &ehci_debug->control); | |
542 | ctrl = readl(&ehci_debug->control); | |
543 | if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) { | |
544 | dbgp_printk("No device in debug port\n"); | |
545 | writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control); | |
546 | return -ENODEV; | |
547 | } | |
548 | dbgp_ehci_status("debug ported enabled"); | |
549 | ||
550 | /* Completely transfer the debug device to the debug controller */ | |
551 | portsc = readl(&ehci_regs->port_status[dbg_port - 1]); | |
552 | portsc &= ~PORT_PE; | |
553 | writel(portsc, &ehci_regs->port_status[dbg_port - 1]); | |
554 | ||
555 | dbgp_mdelay(100); | |
556 | ||
557 | try_again: | |
558 | /* Find the debug device and make it device number 127 */ | |
559 | for (devnum = 0; devnum <= 127; devnum++) { | |
560 | ret = dbgp_control_msg(devnum, | |
561 | USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE, | |
562 | USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0, | |
563 | &dbgp_desc, sizeof(dbgp_desc)); | |
564 | if (ret > 0) | |
565 | break; | |
566 | } | |
567 | if (devnum > 127) { | |
568 | dbgp_printk("Could not find attached debug device\n"); | |
569 | goto err; | |
570 | } | |
571 | if (ret < 0) { | |
572 | dbgp_printk("Attached device is not a debug device\n"); | |
573 | goto err; | |
574 | } | |
575 | dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint; | |
4fe1da4e | 576 | dbgp_endpoint_in = dbgp_desc.bDebugInEndpoint; |
91777826 JW |
577 | |
578 | /* Move the device to 127 if it isn't already there */ | |
579 | if (devnum != USB_DEBUG_DEVNUM) { | |
580 | ret = dbgp_control_msg(devnum, | |
581 | USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, | |
582 | USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0); | |
583 | if (ret < 0) { | |
584 | dbgp_printk("Could not move attached device to %d\n", | |
585 | USB_DEBUG_DEVNUM); | |
586 | goto err; | |
587 | } | |
588 | devnum = USB_DEBUG_DEVNUM; | |
589 | dbgp_printk("debug device renamed to 127\n"); | |
590 | } | |
591 | ||
592 | /* Enable the debug interface */ | |
593 | ret = dbgp_control_msg(USB_DEBUG_DEVNUM, | |
594 | USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, | |
595 | USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0); | |
596 | if (ret < 0) { | |
597 | dbgp_printk(" Could not enable the debug device\n"); | |
598 | goto err; | |
599 | } | |
600 | dbgp_printk("debug interface enabled\n"); | |
601 | /* Perform a small write to get the even/odd data state in sync | |
602 | */ | |
603 | ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1); | |
604 | if (ret < 0) { | |
605 | dbgp_printk("dbgp_bulk_write failed: %d\n", ret); | |
606 | goto err; | |
607 | } | |
ef58d97a | 608 | dbgp_printk("small write done\n"); |
91777826 JW |
609 | dbgp_not_safe = 0; |
610 | ||
611 | return 0; | |
612 | err: | |
613 | if (tries--) | |
614 | goto try_again; | |
615 | return -ENODEV; | |
616 | } | |
9fa5780b | 617 | |
40b52371 | 618 | static int ehci_reset_port(int port) |
df6c5169 JW |
619 | { |
620 | u32 portsc; | |
621 | u32 delay_time, delay; | |
622 | int loop; | |
623 | ||
91777826 | 624 | dbgp_ehci_status("reset port"); |
df6c5169 JW |
625 | /* Reset the usb debug port */ |
626 | portsc = readl(&ehci_regs->port_status[port - 1]); | |
627 | portsc &= ~PORT_PE; | |
628 | portsc |= PORT_RESET; | |
629 | writel(portsc, &ehci_regs->port_status[port - 1]); | |
630 | ||
631 | delay = HUB_ROOT_RESET_TIME; | |
632 | for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT; | |
633 | delay_time += delay) { | |
634 | dbgp_mdelay(delay); | |
df6c5169 | 635 | portsc = readl(&ehci_regs->port_status[port - 1]); |
56faf0f9 JW |
636 | if (!(portsc & PORT_RESET)) |
637 | break; | |
638 | } | |
df6c5169 JW |
639 | if (portsc & PORT_RESET) { |
640 | /* force reset to complete */ | |
56faf0f9 | 641 | loop = 100 * 1000; |
df6c5169 JW |
642 | writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), |
643 | &ehci_regs->port_status[port - 1]); | |
644 | do { | |
56faf0f9 | 645 | udelay(1); |
df6c5169 JW |
646 | portsc = readl(&ehci_regs->port_status[port-1]); |
647 | } while ((portsc & PORT_RESET) && (--loop > 0)); | |
648 | } | |
649 | ||
650 | /* Device went away? */ | |
651 | if (!(portsc & PORT_CONNECT)) | |
652 | return -ENOTCONN; | |
653 | ||
25985edc | 654 | /* bomb out completely if something weird happened */ |
df6c5169 JW |
655 | if ((portsc & PORT_CSC)) |
656 | return -EINVAL; | |
657 | ||
658 | /* If we've finished resetting, then break out of the loop */ | |
659 | if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) | |
660 | return 0; | |
df6c5169 JW |
661 | return -EBUSY; |
662 | } | |
663 | ||
91777826 | 664 | static int ehci_wait_for_port(int port) |
df6c5169 JW |
665 | { |
666 | u32 status; | |
667 | int ret, reps; | |
668 | ||
56faf0f9 | 669 | for (reps = 0; reps < 300; reps++) { |
df6c5169 | 670 | status = readl(&ehci_regs->status); |
56faf0f9 JW |
671 | if (status & STS_PCD) |
672 | break; | |
673 | dbgp_mdelay(1); | |
df6c5169 | 674 | } |
56faf0f9 JW |
675 | ret = ehci_reset_port(port); |
676 | if (ret == 0) | |
677 | return 0; | |
df6c5169 JW |
678 | return -ENOTCONN; |
679 | } | |
680 | ||
df6c5169 JW |
681 | typedef void (*set_debug_port_t)(int port); |
682 | ||
683 | static void __init default_set_debug_port(int port) | |
684 | { | |
685 | } | |
686 | ||
687 | static set_debug_port_t __initdata set_debug_port = default_set_debug_port; | |
688 | ||
689 | static void __init nvidia_set_debug_port(int port) | |
690 | { | |
691 | u32 dword; | |
692 | dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, | |
693 | 0x74); | |
694 | dword &= ~(0x0f<<12); | |
695 | dword |= ((port & 0x0f)<<12); | |
696 | write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74, | |
697 | dword); | |
698 | dbgp_printk("set debug port to %d\n", port); | |
699 | } | |
700 | ||
701 | static void __init detect_set_debug_port(void) | |
702 | { | |
703 | u32 vendorid; | |
704 | ||
705 | vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, | |
706 | 0x00); | |
707 | ||
708 | if ((vendorid & 0xffff) == 0x10de) { | |
709 | dbgp_printk("using nvidia set_debug_port\n"); | |
710 | set_debug_port = nvidia_set_debug_port; | |
711 | } | |
712 | } | |
713 | ||
093344e1 JW |
714 | /* The code in early_ehci_bios_handoff() is derived from the usb pci |
715 | * quirk initialization, but altered so as to use the early PCI | |
716 | * routines. */ | |
717 | #define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */ | |
718 | #define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ | |
719 | static void __init early_ehci_bios_handoff(void) | |
720 | { | |
721 | u32 hcc_params = readl(&ehci_caps->hcc_params); | |
722 | int offset = (hcc_params >> 8) & 0xff; | |
723 | u32 cap; | |
724 | int msec; | |
725 | ||
726 | if (!offset) | |
727 | return; | |
728 | ||
729 | cap = read_pci_config(ehci_dev.bus, ehci_dev.slot, | |
730 | ehci_dev.func, offset); | |
731 | dbgp_printk("dbgp: ehci BIOS state %08x\n", cap); | |
732 | ||
733 | if ((cap & 0xff) == 1 && (cap & EHCI_USBLEGSUP_BIOS)) { | |
734 | dbgp_printk("dbgp: BIOS handoff\n"); | |
735 | write_pci_config_byte(ehci_dev.bus, ehci_dev.slot, | |
736 | ehci_dev.func, offset + 3, 1); | |
737 | } | |
738 | ||
739 | /* if boot firmware now owns EHCI, spin till it hands it over. */ | |
740 | msec = 1000; | |
741 | while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) { | |
742 | mdelay(10); | |
743 | msec -= 10; | |
744 | cap = read_pci_config(ehci_dev.bus, ehci_dev.slot, | |
745 | ehci_dev.func, offset); | |
746 | } | |
747 | ||
748 | if (cap & EHCI_USBLEGSUP_BIOS) { | |
749 | /* well, possibly buggy BIOS... try to shut it down, | |
750 | * and hope nothing goes too wrong */ | |
751 | dbgp_printk("dbgp: BIOS handoff failed: %08x\n", cap); | |
752 | write_pci_config_byte(ehci_dev.bus, ehci_dev.slot, | |
753 | ehci_dev.func, offset + 2, 0); | |
754 | } | |
755 | ||
756 | /* just in case, always disable EHCI SMIs */ | |
757 | write_pci_config_byte(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, | |
758 | offset + EHCI_USBLEGCTLSTS, 0); | |
759 | } | |
760 | ||
df6c5169 JW |
761 | static int __init ehci_setup(void) |
762 | { | |
91777826 | 763 | u32 ctrl, portsc, hcs_params; |
df6c5169 | 764 | u32 debug_port, new_debug_port = 0, n_ports; |
df6c5169 | 765 | int ret, i; |
df6c5169 JW |
766 | int port_map_tried; |
767 | int playtimes = 3; | |
768 | ||
093344e1 JW |
769 | early_ehci_bios_handoff(); |
770 | ||
df6c5169 JW |
771 | try_next_time: |
772 | port_map_tried = 0; | |
773 | ||
774 | try_next_port: | |
775 | ||
776 | hcs_params = readl(&ehci_caps->hcs_params); | |
777 | debug_port = HCS_DEBUG_PORT(hcs_params); | |
91777826 | 778 | dbgp_phys_port = debug_port; |
df6c5169 JW |
779 | n_ports = HCS_N_PORTS(hcs_params); |
780 | ||
781 | dbgp_printk("debug_port: %d\n", debug_port); | |
782 | dbgp_printk("n_ports: %d\n", n_ports); | |
91777826 | 783 | dbgp_ehci_status(""); |
df6c5169 JW |
784 | |
785 | for (i = 1; i <= n_ports; i++) { | |
786 | portsc = readl(&ehci_regs->port_status[i-1]); | |
787 | dbgp_printk("portstatus%d: %08x\n", i, portsc); | |
788 | } | |
789 | ||
790 | if (port_map_tried && (new_debug_port != debug_port)) { | |
791 | if (--playtimes) { | |
792 | set_debug_port(new_debug_port); | |
793 | goto try_next_time; | |
794 | } | |
795 | return -1; | |
796 | } | |
797 | ||
91777826 JW |
798 | /* Only reset the controller if it is not already in the |
799 | * configured state */ | |
800 | if (!(readl(&ehci_regs->configured_flag) & FLAG_CF)) { | |
801 | if (dbgp_ehci_controller_reset() != 0) | |
802 | return -1; | |
803 | } else { | |
804 | dbgp_ehci_status("ehci skip - already configured"); | |
df6c5169 | 805 | } |
df6c5169 | 806 | |
9fa5780b | 807 | ret = _dbgp_external_startup(); |
91777826 | 808 | if (ret == -EIO) |
df6c5169 | 809 | goto next_debug_port; |
df6c5169 | 810 | |
df6c5169 | 811 | if (ret < 0) { |
91777826 JW |
812 | /* Things didn't work so remove my claim */ |
813 | ctrl = readl(&ehci_debug->control); | |
814 | ctrl &= ~(DBGP_CLAIM | DBGP_OUT); | |
815 | writel(ctrl, &ehci_debug->control); | |
816 | return -1; | |
df6c5169 | 817 | } |
df6c5169 | 818 | return 0; |
df6c5169 JW |
819 | |
820 | next_debug_port: | |
821 | port_map_tried |= (1<<(debug_port - 1)); | |
822 | new_debug_port = ((debug_port-1+1)%n_ports) + 1; | |
823 | if (port_map_tried != ((1<<n_ports) - 1)) { | |
824 | set_debug_port(new_debug_port); | |
825 | goto try_next_port; | |
826 | } | |
827 | if (--playtimes) { | |
828 | set_debug_port(new_debug_port); | |
829 | goto try_next_time; | |
830 | } | |
831 | ||
832 | return -1; | |
833 | } | |
834 | ||
835 | int __init early_dbgp_init(char *s) | |
836 | { | |
837 | u32 debug_port, bar, offset; | |
838 | u32 bus, slot, func, cap; | |
839 | void __iomem *ehci_bar; | |
840 | u32 dbgp_num; | |
841 | u32 bar_val; | |
842 | char *e; | |
843 | int ret; | |
844 | u8 byte; | |
845 | ||
846 | if (!early_pci_allowed()) | |
847 | return -1; | |
848 | ||
849 | dbgp_num = 0; | |
850 | if (*s) | |
851 | dbgp_num = simple_strtoul(s, &e, 10); | |
852 | dbgp_printk("dbgp_num: %d\n", dbgp_num); | |
853 | ||
854 | cap = find_dbgp(dbgp_num, &bus, &slot, &func); | |
855 | if (!cap) | |
856 | return -1; | |
857 | ||
858 | dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot, | |
859 | func); | |
860 | ||
861 | debug_port = read_pci_config(bus, slot, func, cap); | |
862 | bar = (debug_port >> 29) & 0x7; | |
863 | bar = (bar * 4) + 0xc; | |
864 | offset = (debug_port >> 16) & 0xfff; | |
865 | dbgp_printk("bar: %02x offset: %03x\n", bar, offset); | |
866 | if (bar != PCI_BASE_ADDRESS_0) { | |
867 | dbgp_printk("only debug ports on bar 1 handled.\n"); | |
868 | ||
869 | return -1; | |
870 | } | |
871 | ||
872 | bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0); | |
873 | dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset); | |
874 | if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) { | |
875 | dbgp_printk("only simple 32bit mmio bars supported\n"); | |
876 | ||
877 | return -1; | |
878 | } | |
879 | ||
880 | /* double check if the mem space is enabled */ | |
881 | byte = read_pci_config_byte(bus, slot, func, 0x04); | |
882 | if (!(byte & 0x2)) { | |
883 | byte |= 0x02; | |
884 | write_pci_config_byte(bus, slot, func, 0x04, byte); | |
885 | dbgp_printk("mmio for ehci enabled\n"); | |
886 | } | |
887 | ||
888 | /* | |
889 | * FIXME I don't have the bar size so just guess PAGE_SIZE is more | |
890 | * than enough. 1K is the biggest I have seen. | |
891 | */ | |
892 | set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK); | |
893 | ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE); | |
894 | ehci_bar += bar_val & ~PAGE_MASK; | |
895 | dbgp_printk("ehci_bar: %p\n", ehci_bar); | |
896 | ||
897 | ehci_caps = ehci_bar; | |
c430131a | 898 | ehci_regs = ehci_bar + EARLY_HC_LENGTH(readl(&ehci_caps->hc_capbase)); |
df6c5169 JW |
899 | ehci_debug = ehci_bar + offset; |
900 | ehci_dev.bus = bus; | |
901 | ehci_dev.slot = slot; | |
902 | ehci_dev.func = func; | |
903 | ||
904 | detect_set_debug_port(); | |
905 | ||
906 | ret = ehci_setup(); | |
907 | if (ret < 0) { | |
908 | dbgp_printk("ehci_setup failed\n"); | |
909 | ehci_debug = NULL; | |
910 | ||
911 | return -1; | |
912 | } | |
91777826 | 913 | dbgp_ehci_status("early_init_complete"); |
df6c5169 JW |
914 | |
915 | return 0; | |
916 | } | |
917 | ||
918 | static void early_dbgp_write(struct console *con, const char *str, u32 n) | |
919 | { | |
920 | int chunk, ret; | |
87a5d151 JW |
921 | char buf[DBGP_MAX_PACKET]; |
922 | int use_cr = 0; | |
91777826 JW |
923 | u32 cmd, ctrl; |
924 | int reset_run = 0; | |
df6c5169 | 925 | |
91777826 | 926 | if (!ehci_debug || dbgp_not_safe) |
df6c5169 | 927 | return; |
91777826 JW |
928 | |
929 | cmd = readl(&ehci_regs->command); | |
930 | if (unlikely(!(cmd & CMD_RUN))) { | |
931 | /* If the ehci controller is not in the run state do extended | |
932 | * checks to see if the acpi or some other initialization also | |
933 | * reset the ehci debug port */ | |
934 | ctrl = readl(&ehci_debug->control); | |
935 | if (!(ctrl & DBGP_ENABLED)) { | |
936 | dbgp_not_safe = 1; | |
9fa5780b | 937 | _dbgp_external_startup(); |
91777826 JW |
938 | } else { |
939 | cmd |= CMD_RUN; | |
940 | writel(cmd, &ehci_regs->command); | |
941 | reset_run = 1; | |
942 | } | |
943 | } | |
df6c5169 | 944 | while (n > 0) { |
87a5d151 JW |
945 | for (chunk = 0; chunk < DBGP_MAX_PACKET && n > 0; |
946 | str++, chunk++, n--) { | |
947 | if (!use_cr && *str == '\n') { | |
948 | use_cr = 1; | |
949 | buf[chunk] = '\r'; | |
950 | str--; | |
951 | n++; | |
952 | continue; | |
953 | } | |
954 | if (use_cr) | |
955 | use_cr = 0; | |
956 | buf[chunk] = *str; | |
957 | } | |
91777826 JW |
958 | if (chunk > 0) { |
959 | ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, | |
960 | dbgp_endpoint_out, buf, chunk); | |
961 | } | |
962 | } | |
963 | if (unlikely(reset_run)) { | |
964 | cmd = readl(&ehci_regs->command); | |
965 | cmd &= ~CMD_RUN; | |
966 | writel(cmd, &ehci_regs->command); | |
df6c5169 JW |
967 | } |
968 | } | |
969 | ||
970 | struct console early_dbgp_console = { | |
971 | .name = "earlydbg", | |
972 | .write = early_dbgp_write, | |
973 | .flags = CON_PRINTBUFFER, | |
974 | .index = -1, | |
975 | }; | |
8d053c79 | 976 | |
bc8d51ea | 977 | #if IS_ENABLED(CONFIG_USB) |
9fa5780b | 978 | int dbgp_reset_prep(struct usb_hcd *hcd) |
8d053c79 | 979 | { |
9fa5780b | 980 | int ret = xen_dbgp_reset_prep(hcd); |
8d053c79 JW |
981 | u32 ctrl; |
982 | ||
9fa5780b JB |
983 | if (ret) |
984 | return ret; | |
985 | ||
8d053c79 JW |
986 | dbgp_not_safe = 1; |
987 | if (!ehci_debug) | |
988 | return 0; | |
989 | ||
4fe1da4e JW |
990 | if ((early_dbgp_console.index != -1 && |
991 | !(early_dbgp_console.flags & CON_BOOT)) || | |
992 | dbgp_kgdb_mode) | |
8d053c79 JW |
993 | return 1; |
994 | /* This means the console is not initialized, or should get | |
995 | * shutdown so as to allow for reuse of the usb device, which | |
996 | * means it is time to shutdown the usb debug port. */ | |
997 | ctrl = readl(&ehci_debug->control); | |
998 | if (ctrl & DBGP_ENABLED) { | |
999 | ctrl &= ~(DBGP_CLAIM); | |
1000 | writel(ctrl, &ehci_debug->control); | |
1001 | } | |
1002 | return 0; | |
1003 | } | |
1004 | EXPORT_SYMBOL_GPL(dbgp_reset_prep); | |
4fe1da4e | 1005 | |
86effe59 JB |
1006 | int dbgp_external_startup(struct usb_hcd *hcd) |
1007 | { | |
1008 | return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup(); | |
1009 | } | |
1010 | EXPORT_SYMBOL_GPL(dbgp_external_startup); | |
bc8d51ea | 1011 | #endif /* USB */ |
86effe59 | 1012 | |
4fe1da4e JW |
1013 | #ifdef CONFIG_KGDB |
1014 | ||
1015 | static char kgdbdbgp_buf[DBGP_MAX_PACKET]; | |
1016 | static int kgdbdbgp_buf_sz; | |
1017 | static int kgdbdbgp_buf_idx; | |
1018 | static int kgdbdbgp_loop_cnt = DBGP_LOOPS; | |
1019 | ||
1020 | static int kgdbdbgp_read_char(void) | |
1021 | { | |
1022 | int ret; | |
1023 | ||
1024 | if (kgdbdbgp_buf_idx < kgdbdbgp_buf_sz) { | |
1025 | char ch = kgdbdbgp_buf[kgdbdbgp_buf_idx++]; | |
1026 | return ch; | |
1027 | } | |
1028 | ||
1029 | ret = dbgp_bulk_read(USB_DEBUG_DEVNUM, dbgp_endpoint_in, | |
1030 | &kgdbdbgp_buf, DBGP_MAX_PACKET, | |
1031 | kgdbdbgp_loop_cnt); | |
1032 | if (ret <= 0) | |
1033 | return NO_POLL_CHAR; | |
1034 | kgdbdbgp_buf_sz = ret; | |
1035 | kgdbdbgp_buf_idx = 1; | |
1036 | return kgdbdbgp_buf[0]; | |
1037 | } | |
1038 | ||
1039 | static void kgdbdbgp_write_char(u8 chr) | |
1040 | { | |
1041 | early_dbgp_write(NULL, &chr, 1); | |
1042 | } | |
1043 | ||
1044 | static struct kgdb_io kgdbdbgp_io_ops = { | |
1045 | .name = "kgdbdbgp", | |
1046 | .read_char = kgdbdbgp_read_char, | |
1047 | .write_char = kgdbdbgp_write_char, | |
1048 | }; | |
1049 | ||
1050 | static int kgdbdbgp_wait_time; | |
1051 | ||
1052 | static int __init kgdbdbgp_parse_config(char *str) | |
1053 | { | |
1054 | char *ptr; | |
1055 | ||
1056 | if (!ehci_debug) { | |
1057 | if (early_dbgp_init(str)) | |
1058 | return -1; | |
1059 | } | |
1060 | ptr = strchr(str, ','); | |
1061 | if (ptr) { | |
1062 | ptr++; | |
1063 | kgdbdbgp_wait_time = simple_strtoul(ptr, &ptr, 10); | |
1064 | } | |
1065 | kgdb_register_io_module(&kgdbdbgp_io_ops); | |
1066 | kgdbdbgp_io_ops.is_console = early_dbgp_console.index != -1; | |
1067 | ||
1068 | return 0; | |
1069 | } | |
1070 | early_param("kgdbdbgp", kgdbdbgp_parse_config); | |
1071 | ||
1072 | static int kgdbdbgp_reader_thread(void *ptr) | |
1073 | { | |
1074 | int ret; | |
1075 | ||
1076 | while (readl(&ehci_debug->control) & DBGP_ENABLED) { | |
1077 | kgdbdbgp_loop_cnt = 1; | |
1078 | ret = kgdbdbgp_read_char(); | |
1079 | kgdbdbgp_loop_cnt = DBGP_LOOPS; | |
1080 | if (ret != NO_POLL_CHAR) { | |
1081 | if (ret == 0x3 || ret == '$') { | |
1082 | if (ret == '$') | |
1083 | kgdbdbgp_buf_idx--; | |
1084 | kgdb_breakpoint(); | |
1085 | } | |
1086 | continue; | |
1087 | } | |
1088 | schedule_timeout_interruptible(kgdbdbgp_wait_time * HZ); | |
1089 | } | |
1090 | return 0; | |
1091 | } | |
1092 | ||
1093 | static int __init kgdbdbgp_start_thread(void) | |
1094 | { | |
1095 | if (dbgp_kgdb_mode && kgdbdbgp_wait_time) | |
1096 | kthread_run(kgdbdbgp_reader_thread, NULL, "%s", "dbgp"); | |
1097 | ||
1098 | return 0; | |
1099 | } | |
1100 | module_init(kgdbdbgp_start_thread); | |
1101 | #endif /* CONFIG_KGDB */ |