Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # USB Gadget support on a system involves | |
3 | # (a) a peripheral controller, and | |
4 | # (b) the gadget driver using it. | |
5 | # | |
6 | # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! | |
7 | # | |
8 | # - Host systems (like PCs) need CONFIG_USB (with "A" jacks). | |
9 | # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). | |
cab00891 | 10 | # - Some systems have both kinds of controllers. |
1da177e4 LT |
11 | # |
12 | # With help from a special transceiver and a "Mini-AB" jack, systems with | |
13 | # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). | |
14 | # | |
1da177e4 | 15 | |
b75be4ab DC |
16 | menuconfig USB_GADGET |
17 | tristate "USB Gadget Support" | |
86dc243c | 18 | select NLS |
1da177e4 LT |
19 | help |
20 | USB is a master/slave protocol, organized with one master | |
21 | host (such as a PC) controlling up to 127 peripheral devices. | |
22 | The USB hardware is asymmetric, which makes it easier to set up: | |
23 | you can't connect a "to-the-host" connector to a peripheral. | |
24 | ||
25 | Linux can run in the host, or in the peripheral. In both cases | |
26 | you need a low level bus controller driver, and some software | |
27 | talking to it. Peripheral controllers are often discrete silicon, | |
28 | or are integrated with the CPU in a microcontroller. The more | |
e113f29c | 29 | familiar host side controllers have names like "EHCI", "OHCI", |
1da177e4 LT |
30 | or "UHCI", and are usually integrated into southbridges on PC |
31 | motherboards. | |
32 | ||
33 | Enable this configuration option if you want to run Linux inside | |
34 | a USB peripheral device. Configure one hardware driver for your | |
35 | peripheral/device side bus controller, and a "gadget driver" for | |
36 | your peripheral protocol. (If you use modular gadget drivers, | |
37 | you may configure more than one.) | |
38 | ||
39 | If in doubt, say "N" and don't enable these drivers; most people | |
40 | don't have this kind of hardware (except maybe inside Linux PDAs). | |
41 | ||
42 | For more information, see <http://www.linux-usb.org/gadget> and | |
43 | the kernel DocBook documentation for this API. | |
44 | ||
b75be4ab DC |
45 | if USB_GADGET |
46 | ||
70790f63 | 47 | config USB_GADGET_DEBUG |
6341e62b | 48 | bool "Debugging messages (DEVELOPMENT)" |
36e893d2 | 49 | depends on DEBUG_KERNEL |
70790f63 DB |
50 | help |
51 | Many controller and gadget drivers will print some debugging | |
52 | messages if you use this option to ask for those messages. | |
53 | ||
54 | Avoid enabling these messages, even if you're actively | |
55 | debugging such a driver. Many drivers will emit so many | |
cd108691 AL |
56 | messages that the driver timings are affected, which will |
57 | either create new failure modes or remove the one you're | |
58 | trying to track down. Never enable these messages for a | |
59 | production build. | |
60 | ||
61 | config USB_GADGET_VERBOSE | |
62 | bool "Verbose debugging Messages (DEVELOPMENT)" | |
63 | depends on USB_GADGET_DEBUG | |
64 | help | |
65 | Many controller and gadget drivers will print verbose debugging | |
66 | messages if you use this option to ask for those messages. | |
67 | ||
68 | Avoid enabling these messages, even if you're actively | |
69 | debugging such a driver. Many drivers will emit so many | |
70790f63 DB |
70 | messages that the driver timings are affected, which will |
71 | either create new failure modes or remove the one you're | |
72 | trying to track down. Never enable these messages for a | |
73 | production build. | |
74 | ||
1da177e4 | 75 | config USB_GADGET_DEBUG_FILES |
6341e62b | 76 | bool "Debugging information files (DEVELOPMENT)" |
36e893d2 | 77 | depends on PROC_FS |
1da177e4 LT |
78 | help |
79 | Some of the drivers in the "gadget" framework can expose | |
80 | debugging information in files such as /proc/driver/udc | |
81 | (for a peripheral controller). The information in these | |
82 | files may help when you're troubleshooting or bringing up a | |
83 | driver on a new board. Enable these files by choosing "Y" | |
84 | here. If in doubt, or to conserve kernel memory, say "N". | |
85 | ||
914a3f3b | 86 | config USB_GADGET_DEBUG_FS |
6341e62b | 87 | bool "Debugging information files in debugfs (DEVELOPMENT)" |
36e893d2 | 88 | depends on DEBUG_FS |
914a3f3b HS |
89 | help |
90 | Some of the drivers in the "gadget" framework can expose | |
91 | debugging information in files under /sys/kernel/debug/. | |
92 | The information in these files may help when you're | |
93 | troubleshooting or bringing up a driver on a new board. | |
94 | Enable these files by choosing "Y" here. If in doubt, or | |
95 | to conserve kernel memory, say "N". | |
96 | ||
36e893d2 DB |
97 | config USB_GADGET_VBUS_DRAW |
98 | int "Maximum VBUS Power usage (2-500 mA)" | |
99 | range 2 500 | |
100 | default 2 | |
101 | help | |
102 | Some devices need to draw power from USB when they are | |
103 | configured, perhaps to operate circuitry or to recharge | |
104 | batteries. This is in addition to any local power supply, | |
105 | such as an AC adapter or batteries. | |
106 | ||
107 | Enter the maximum power your device draws through USB, in | |
108 | milliAmperes. The permitted range of values is 2 - 500 mA; | |
109 | 0 mA would be legal, but can make some hosts misbehave. | |
110 | ||
111 | This value will be used except for system-specific gadget | |
112 | drivers that have more specific information. | |
113 | ||
6532c7fd PF |
114 | config USB_GADGET_STORAGE_NUM_BUFFERS |
115 | int "Number of storage pipeline buffers" | |
116 | range 2 4 | |
117 | default 2 | |
118 | help | |
119 | Usually 2 buffers are enough to establish a good buffering | |
120 | pipeline. The number may be increased in order to compensate | |
121 | for a bursty VFS behaviour. For instance there may be CPU wake up | |
122 | latencies that makes the VFS to appear bursty in a system with | |
123 | an CPU on-demand governor. Especially if DMA is doing IO to | |
124 | offload the CPU. In this case the CPU will go into power | |
125 | save often and spin up occasionally to move data within VFS. | |
126 | If selecting USB_GADGET_DEBUG_FILES this value may be set by | |
127 | a module parameter as well. | |
128 | If unsure, say 2. | |
129 | ||
90fccb52 | 130 | source "drivers/usb/gadget/udc/Kconfig" |
1da177e4 | 131 | |
1da177e4 LT |
132 | # |
133 | # USB Gadget Drivers | |
134 | # | |
a84d9e53 SAS |
135 | |
136 | # composite based drivers | |
137 | config USB_LIBCOMPOSITE | |
138 | tristate | |
88af8bbe | 139 | select CONFIGFS_FS |
a84d9e53 SAS |
140 | depends on USB_GADGET |
141 | ||
ff47f594 SAS |
142 | config USB_F_ACM |
143 | tristate | |
144 | ||
cf9a08ae SAS |
145 | config USB_F_SS_LB |
146 | tristate | |
147 | ||
3249ca22 SAS |
148 | config USB_U_SERIAL |
149 | tristate | |
150 | ||
f1a1823f AP |
151 | config USB_U_ETHER |
152 | tristate | |
153 | ||
60540ea2 | 154 | config USB_F_SERIAL |
3249ca22 SAS |
155 | tristate |
156 | ||
1d8fc251 AP |
157 | config USB_F_OBEX |
158 | tristate | |
159 | ||
40d133d7 AP |
160 | config USB_F_NCM |
161 | tristate | |
162 | ||
fee562a6 AP |
163 | config USB_F_ECM |
164 | tristate | |
165 | ||
fcbdf12e AP |
166 | config USB_F_PHONET |
167 | tristate | |
168 | ||
b29002a1 AP |
169 | config USB_F_EEM |
170 | tristate | |
171 | ||
8cedba7c AP |
172 | config USB_F_SUBSET |
173 | tristate | |
174 | ||
f466c635 AP |
175 | config USB_F_RNDIS |
176 | tristate | |
177 | ||
e5eaa0dc AP |
178 | config USB_F_MASS_STORAGE |
179 | tristate | |
180 | ||
5920cda6 AP |
181 | config USB_F_FS |
182 | tristate | |
183 | ||
f3a3406b AP |
184 | config USB_F_UAC1 |
185 | tristate | |
186 | ||
f8f93d24 AP |
187 | config USB_F_UAC2 |
188 | tristate | |
189 | ||
6d11ed76 AP |
190 | config USB_F_UVC |
191 | tristate | |
192 | ||
b85e9de9 AP |
193 | config USB_F_MIDI |
194 | tristate | |
195 | ||
cb382536 AP |
196 | config USB_F_HID |
197 | tristate | |
198 | ||
b26394bd AP |
199 | config USB_F_PRINTER |
200 | tristate | |
201 | ||
1da177e4 LT |
202 | choice |
203 | tristate "USB Gadget Drivers" | |
1da177e4 LT |
204 | default USB_ETH |
205 | help | |
206 | A Linux "Gadget Driver" talks to the USB Peripheral Controller | |
207 | driver through the abstract "gadget" API. Some other operating | |
208 | systems call these "client" drivers, of which "class drivers" | |
209 | are a subset (implementing a USB device class specification). | |
210 | A gadget driver implements one or more USB functions using | |
211 | the peripheral hardware. | |
212 | ||
213 | Gadget drivers are hardware-neutral, or "platform independent", | |
214 | except that they sometimes must understand quirks or limitations | |
215 | of the particular controllers they work with. For example, when | |
216 | a controller doesn't support alternate configurations or provide | |
217 | enough of the right types of endpoints, the gadget driver might | |
218 | not be able work with that controller, or might need to implement | |
219 | a less common variant of a device class protocol. | |
220 | ||
221 | # this first set of drivers all depend on bulk-capable hardware. | |
222 | ||
d1c02452 AP |
223 | config USB_CONFIGFS |
224 | tristate "USB functions configurable through configfs" | |
225 | select USB_LIBCOMPOSITE | |
226 | help | |
227 | A Linux USB "gadget" can be set up through configfs. | |
228 | If this is the case, the USB functions (which from the host's | |
229 | perspective are seen as interfaces) and configurations are | |
230 | specified simply by creating appropriate directories in configfs. | |
231 | Associating functions with configurations is done by creating | |
232 | appropriate symbolic links. | |
9c1d6962 | 233 | For more information see Documentation/usb/gadget_configfs.txt. |
d1c02452 AP |
234 | |
235 | config USB_CONFIGFS_SERIAL | |
6341e62b | 236 | bool "Generic serial bulk in/out" |
d1c02452 AP |
237 | depends on USB_CONFIGFS |
238 | depends on TTY | |
239 | select USB_U_SERIAL | |
240 | select USB_F_SERIAL | |
241 | help | |
242 | The function talks to the Linux-USB generic serial driver. | |
243 | ||
244 | config USB_CONFIGFS_ACM | |
6341e62b | 245 | bool "Abstract Control Model (CDC ACM)" |
d1c02452 AP |
246 | depends on USB_CONFIGFS |
247 | depends on TTY | |
248 | select USB_U_SERIAL | |
249 | select USB_F_ACM | |
250 | help | |
251 | ACM serial link. This function can be used to interoperate with | |
252 | MS-Windows hosts or with the Linux-USB "cdc-acm" driver. | |
253 | ||
254 | config USB_CONFIGFS_OBEX | |
6341e62b | 255 | bool "Object Exchange Model (CDC OBEX)" |
d1c02452 AP |
256 | depends on USB_CONFIGFS |
257 | depends on TTY | |
258 | select USB_U_SERIAL | |
259 | select USB_F_OBEX | |
260 | help | |
261 | You will need a user space OBEX server talking to /dev/ttyGS*, | |
262 | since the kernel itself doesn't implement the OBEX protocol. | |
263 | ||
264 | config USB_CONFIGFS_NCM | |
6341e62b | 265 | bool "Network Control Model (CDC NCM)" |
d1c02452 AP |
266 | depends on USB_CONFIGFS |
267 | depends on NET | |
268 | select USB_U_ETHER | |
269 | select USB_F_NCM | |
270 | help | |
271 | NCM is an advanced protocol for Ethernet encapsulation, allows | |
272 | grouping of several ethernet frames into one USB transfer and | |
273 | different alignment possibilities. | |
274 | ||
275 | config USB_CONFIGFS_ECM | |
6341e62b | 276 | bool "Ethernet Control Model (CDC ECM)" |
d1c02452 AP |
277 | depends on USB_CONFIGFS |
278 | depends on NET | |
279 | select USB_U_ETHER | |
280 | select USB_F_ECM | |
281 | help | |
282 | The "Communication Device Class" (CDC) Ethernet Control Model. | |
283 | That protocol is often avoided with pure Ethernet adapters, in | |
284 | favor of simpler vendor-specific hardware, but is widely | |
285 | supported by firmware for smart network devices. | |
286 | ||
02832e56 | 287 | config USB_CONFIGFS_ECM_SUBSET |
6341e62b | 288 | bool "Ethernet Control Model (CDC ECM) subset" |
02832e56 AP |
289 | depends on USB_CONFIGFS |
290 | depends on NET | |
291 | select USB_U_ETHER | |
292 | select USB_F_SUBSET | |
293 | help | |
294 | On hardware that can't implement the full protocol, | |
295 | a simple CDC subset is used, placing fewer demands on USB. | |
296 | ||
b3df2faa AP |
297 | config USB_CONFIGFS_RNDIS |
298 | bool "RNDIS" | |
299 | depends on USB_CONFIGFS | |
300 | depends on NET | |
301 | select USB_U_ETHER | |
302 | select USB_F_RNDIS | |
303 | help | |
304 | Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, | |
305 | and Microsoft provides redistributable binary RNDIS drivers for | |
306 | older versions of Windows. | |
307 | ||
308 | To make MS-Windows work with this, use Documentation/usb/linux.inf | |
309 | as the "driver info file". For versions of MS-Windows older than | |
310 | XP, you'll need to download drivers from Microsoft's website; a URL | |
311 | is given in comments found in that info file. | |
312 | ||
17b80976 AP |
313 | config USB_CONFIGFS_EEM |
314 | bool "Ethernet Emulation Model (EEM)" | |
315 | depends on USB_CONFIGFS | |
316 | depends on NET | |
317 | select USB_U_ETHER | |
318 | select USB_F_EEM | |
319 | help | |
320 | CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM | |
321 | and therefore can be supported by more hardware. Technically ECM and | |
322 | EEM are designed for different applications. The ECM model extends | |
323 | the network interface to the target (e.g. a USB cable modem), and the | |
324 | EEM model is for mobile devices to communicate with hosts using | |
325 | ethernet over USB. For Linux gadgets, however, the interface with | |
326 | the host is the same (a usbX device), so the differences are minimal. | |
327 | ||
83408745 | 328 | config USB_CONFIGFS_PHONET |
6341e62b | 329 | bool "Phonet protocol" |
83408745 AP |
330 | depends on USB_CONFIGFS |
331 | depends on NET | |
332 | depends on PHONET | |
333 | select USB_U_ETHER | |
334 | select USB_F_PHONET | |
335 | help | |
336 | The Phonet protocol implementation for USB device. | |
337 | ||
ef0aa4b9 | 338 | config USB_CONFIGFS_MASS_STORAGE |
6341e62b | 339 | bool "Mass storage" |
ef0aa4b9 | 340 | depends on USB_CONFIGFS |
bc912b0d | 341 | depends on BLOCK |
ef0aa4b9 AP |
342 | select USB_F_MASS_STORAGE |
343 | help | |
344 | The Mass Storage Gadget acts as a USB Mass Storage disk drive. | |
345 | As its storage repository it can use a regular file or a block | |
346 | device (in much the same way as the "loop" device driver), | |
347 | specified as a module parameter or sysfs option. | |
348 | ||
25d80151 | 349 | config USB_CONFIGFS_F_LB_SS |
6341e62b | 350 | bool "Loopback and sourcesink function (for testing)" |
c0501f47 AP |
351 | depends on USB_CONFIGFS |
352 | select USB_F_SS_LB | |
353 | help | |
25d80151 AP |
354 | Loopback function loops back a configurable number of transfers. |
355 | Sourcesink function either sinks and sources bulk data. | |
c0501f47 AP |
356 | It also implements control requests, for "chapter 9" conformance. |
357 | Make this be the first driver you try using on top of any new | |
358 | USB peripheral controller driver. Then you can use host-side | |
359 | test software, like the "usbtest" driver, to put your hardware | |
360 | and its driver through a basic set of functional tests. | |
361 | ||
b658499f | 362 | config USB_CONFIGFS_F_FS |
6341e62b | 363 | bool "Function filesystem (FunctionFS)" |
b658499f AP |
364 | depends on USB_CONFIGFS |
365 | select USB_F_FS | |
366 | help | |
367 | The Function Filesystem (FunctionFS) lets one create USB | |
368 | composite functions in user space in the same way GadgetFS | |
369 | lets one create USB gadgets in user space. This allows creation | |
370 | of composite gadgets such that some of the functions are | |
371 | implemented in kernel space (for instance Ethernet, serial or | |
372 | mass storage) and other are implemented in user space. | |
373 | ||
cb0a59f5 | 374 | config USB_CONFIGFS_F_UAC1 |
6341e62b | 375 | bool "Audio Class 1.0" |
cb0a59f5 AP |
376 | depends on USB_CONFIGFS |
377 | depends on SND | |
378 | select USB_LIBCOMPOSITE | |
379 | select SND_PCM | |
380 | select USB_F_UAC1 | |
381 | help | |
382 | This Audio function implements 1 AudioControl interface, | |
383 | 1 AudioStreaming Interface each for USB-OUT and USB-IN. | |
384 | This driver requires a real Audio codec to be present | |
385 | on the device. | |
386 | ||
387 | config USB_CONFIGFS_F_UAC2 | |
6341e62b | 388 | bool "Audio Class 2.0" |
cb0a59f5 AP |
389 | depends on USB_CONFIGFS |
390 | depends on SND | |
391 | select USB_LIBCOMPOSITE | |
392 | select SND_PCM | |
393 | select USB_F_UAC2 | |
394 | help | |
395 | This Audio function is compatible with USB Audio Class | |
396 | specification 2.0. It implements 1 AudioControl interface, | |
397 | 1 AudioStreaming Interface each for USB-OUT and USB-IN. | |
398 | This driver doesn't expect any real Audio codec to be present | |
399 | on the device - the audio streams are simply sinked to and | |
400 | sourced from a virtual ALSA sound card created. The user-space | |
401 | application may choose to do whatever it wants with the data | |
402 | received from the USB Host and choose to provide whatever it | |
403 | wants as audio data to the USB Host. | |
404 | ||
6f1de344 | 405 | config USB_CONFIGFS_F_MIDI |
6341e62b | 406 | bool "MIDI function" |
6f1de344 AP |
407 | depends on USB_CONFIGFS |
408 | depends on SND | |
409 | select USB_LIBCOMPOSITE | |
410 | select SND_RAWMIDI | |
411 | select USB_F_MIDI | |
412 | help | |
413 | The MIDI Function acts as a USB Audio device, with one MIDI | |
414 | input and one MIDI output. These MIDI jacks appear as | |
415 | a sound "card" in the ALSA sound system. Other MIDI | |
416 | connections can then be made on the gadget system, using | |
417 | ALSA's aconnect utility etc. | |
418 | ||
21a9476a | 419 | config USB_CONFIGFS_F_HID |
6341e62b | 420 | bool "HID function" |
21a9476a AP |
421 | depends on USB_CONFIGFS |
422 | select USB_F_HID | |
423 | help | |
424 | The HID function driver provides generic emulation of USB | |
425 | Human Interface Devices (HID). | |
426 | ||
427 | For more information, see Documentation/usb/gadget_hid.txt. | |
428 | ||
46919a23 | 429 | config USB_CONFIGFS_F_UVC |
8333d3cd | 430 | bool "USB Webcam function" |
46919a23 AP |
431 | depends on USB_CONFIGFS |
432 | depends on VIDEO_DEV | |
433 | select VIDEOBUF2_VMALLOC | |
434 | select USB_F_UVC | |
435 | help | |
436 | The Webcam function acts as a composite USB Audio and Video Class | |
437 | device. It provides a userspace API to process UVC control requests | |
438 | and stream video data to the host. | |
439 | ||
ee1cd515 AP |
440 | config USB_CONFIGFS_F_PRINTER |
441 | bool "Printer function" | |
442 | select USB_F_PRINTER | |
f4b4976b | 443 | depends on USB_CONFIGFS |
ee1cd515 AP |
444 | help |
445 | The Printer function channels data between the USB host and a | |
446 | userspace program driving the print engine. The user space | |
447 | program reads and writes the device file /dev/g_printer<X> to | |
448 | receive or send printer data. It can use ioctl calls to | |
449 | the device file to get or set printer status. | |
450 | ||
451 | For more information, see Documentation/usb/gadget_printer.txt | |
452 | which includes sample code for accessing the device file. | |
453 | ||
8443f2d2 | 454 | source "drivers/usb/gadget/legacy/Kconfig" |
1da177e4 LT |
455 | |
456 | endchoice | |
457 | ||
b75be4ab | 458 | endif # USB_GADGET |