projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[PATCH] TTY layer buffering revamp
[deliverable/linux.git] / drivers / usb / gadget / serial.c
CommitLineData
1da177e4
LT		 1/*
2 * g_serial.c -- USB gadget serial driver
3 *
4 * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com)
5 *
6 * This code is based in part on the Gadget Zero driver, which
7 * is Copyright (C) 2003 by David Brownell, all rights reserved.
8 *
9 * This code also borrows from usbserial.c, which is
10 * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
11 * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
12 * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
13 *
14 * This software is distributed under the terms of the GNU General
15 * Public License ("GPL") as published by the Free Software Foundation,
16 * either version 2 of that License or (at your option) any later version.
17 *
18 */
19
20#include <linux/config.h>
21#include <linux/module.h>
22#include <linux/kernel.h>
23#include <linux/delay.h>
24#include <linux/ioport.h>
25#include <linux/sched.h>
26#include <linux/slab.h>
27#include <linux/smp_lock.h>
28#include <linux/errno.h>
29#include <linux/init.h>
30#include <linux/timer.h>
31#include <linux/list.h>
32#include <linux/interrupt.h>
33#include <linux/utsname.h>
34#include <linux/wait.h>
35#include <linux/proc_fs.h>
36#include <linux/device.h>
37#include <linux/tty.h>
38#include <linux/tty_flip.h>
39
40#include <asm/byteorder.h>
41#include <asm/io.h>
42#include <asm/irq.h>
43#include <asm/system.h>
44#include <asm/unaligned.h>
45#include <asm/uaccess.h>
46
47#include <linux/usb_ch9.h>
48#include <linux/usb_cdc.h>
49#include <linux/usb_gadget.h>
50
51#include "gadget_chips.h"
52
53
54/* Wait Cond */
55
56#define __wait_cond_interruptible(wq, condition, lock, flags, ret) \
57do { \
58 wait_queue_t __wait; \
59 init_waitqueue_entry(&__wait, current); \
60 \
61 add_wait_queue(&wq, &__wait); \
62 for (;;) { \
63 set_current_state(TASK_INTERRUPTIBLE); \
64 if (condition) \
65 break; \
66 if (!signal_pending(current)) { \
67 spin_unlock_irqrestore(lock, flags); \
68 schedule(); \
69 spin_lock_irqsave(lock, flags); \
70 continue; \
71 } \
72 ret = -ERESTARTSYS; \
73 break; \
74 } \
75 current->state = TASK_RUNNING; \
76 remove_wait_queue(&wq, &__wait); \
77} while (0)
78
79#define wait_cond_interruptible(wq, condition, lock, flags) \
80({ \
81 int __ret = 0; \
82 if (!(condition)) \
83 __wait_cond_interruptible(wq, condition, lock, flags, \
84 __ret); \
85 __ret; \
86})
87
88#define __wait_cond_interruptible_timeout(wq, condition, lock, flags, \
89 timeout, ret) \
90do { \
91 signed long __timeout = timeout; \
92 wait_queue_t __wait; \
93 init_waitqueue_entry(&__wait, current); \
94 \
95 add_wait_queue(&wq, &__wait); \
96 for (;;) { \
97 set_current_state(TASK_INTERRUPTIBLE); \
98 if (__timeout == 0) \
99 break; \
100 if (condition) \
101 break; \
102 if (!signal_pending(current)) { \
103 spin_unlock_irqrestore(lock, flags); \
104 __timeout = schedule_timeout(__timeout); \
105 spin_lock_irqsave(lock, flags); \
106 continue; \
107 } \
108 ret = -ERESTARTSYS; \
109 break; \
110 } \
111 current->state = TASK_RUNNING; \
112 remove_wait_queue(&wq, &__wait); \
113} while (0)
114
115#define wait_cond_interruptible_timeout(wq, condition, lock, flags, \
116 timeout) \
117({ \
118 int __ret = 0; \
119 if (!(condition)) \
120 __wait_cond_interruptible_timeout(wq, condition, lock, \
121 flags, timeout, __ret); \
122 __ret; \
123})
124
125
126/* Defines */
127
128#define GS_VERSION_STR "v2.0"
129#define GS_VERSION_NUM 0x0200
130
131#define GS_LONG_NAME "Gadget Serial"
132#define GS_SHORT_NAME "g_serial"
133
134#define GS_MAJOR 127
135#define GS_MINOR_START 0
136
137#define GS_NUM_PORTS 16
138
139#define GS_NUM_CONFIGS 1
140#define GS_NO_CONFIG_ID 0
141#define GS_BULK_CONFIG_ID 1
142#define GS_ACM_CONFIG_ID 2
143
144#define GS_MAX_NUM_INTERFACES 2
145#define GS_BULK_INTERFACE_ID 0
146#define GS_CONTROL_INTERFACE_ID 0
147#define GS_DATA_INTERFACE_ID 1
148
149#define GS_MAX_DESC_LEN 256
150
151#define GS_DEFAULT_READ_Q_SIZE 32
152#define GS_DEFAULT_WRITE_Q_SIZE 32
153
154#define GS_DEFAULT_WRITE_BUF_SIZE 8192
155#define GS_TMP_BUF_SIZE 8192
156
157#define GS_CLOSE_TIMEOUT 15
158
159#define GS_DEFAULT_USE_ACM 0
160
161#define GS_DEFAULT_DTE_RATE 9600
162#define GS_DEFAULT_DATA_BITS 8
163#define GS_DEFAULT_PARITY USB_CDC_NO_PARITY
164#define GS_DEFAULT_CHAR_FORMAT USB_CDC_1_STOP_BITS
165
166/* select highspeed/fullspeed, hiding highspeed if not configured */
167#ifdef CONFIG_USB_GADGET_DUALSPEED
168#define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs))
169#else
170#define GS_SPEED_SELECT(is_hs,hs,fs) (fs)
171#endif /* CONFIG_USB_GADGET_DUALSPEED */
172
173/* debug settings */
174#ifdef GS_DEBUG
175static int debug = 1;
176
177#define gs_debug(format, arg...) \
178 do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0)
179#define gs_debug_level(level, format, arg...) \
180 do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0)
181
182#else
183
184#define gs_debug(format, arg...) \
185 do { } while(0)
186#define gs_debug_level(level, format, arg...) \
187 do { } while(0)
188
189#endif /* GS_DEBUG */
190
191/* Thanks to NetChip Technologies for donating this product ID.
192 *
193 * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
194 * Instead: allocate your own, using normal USB-IF procedures.
195 */
196#define GS_VENDOR_ID 0x0525 /* NetChip */
197#define GS_PRODUCT_ID 0xa4a6 /* Linux-USB Serial Gadget */
198#define GS_CDC_PRODUCT_ID 0xa4a7 /* ... as CDC-ACM */
199
200#define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */
201#define GS_NOTIFY_MAXPACKET 8
202
203
204/* Structures */
205
206struct gs_dev;
207
208/* circular buffer */
209struct gs_buf {
210 unsigned int buf_size;
211 char *buf_buf;
212 char *buf_get;
213 char *buf_put;
214};
215
216/* list of requests */
217struct gs_req_entry {
218 struct list_head re_entry;
219 struct usb_request *re_req;
220};
221
222/* the port structure holds info for each port, one for each minor number */
223struct gs_port {
224 struct gs_dev *port_dev; /* pointer to device struct */
225 struct tty_struct *port_tty; /* pointer to tty struct */
226 spinlock_t port_lock;
227 int port_num;
228 int port_open_count;
229 int port_in_use; /* open/close in progress */
230 wait_queue_head_t port_write_wait;/* waiting to write */
231 struct gs_buf *port_write_buf;
232 struct usb_cdc_line_coding port_line_coding;
233};
234
235/* the device structure holds info for the USB device */
236struct gs_dev {
237 struct usb_gadget *dev_gadget; /* gadget device pointer */
238 spinlock_t dev_lock; /* lock for set/reset config */
239 int dev_config; /* configuration number */
240 struct usb_ep *dev_notify_ep; /* address of notify endpoint */
241 struct usb_ep *dev_in_ep; /* address of in endpoint */
242 struct usb_ep *dev_out_ep; /* address of out endpoint */
093cf723 243 struct usb_endpoint_descriptor /* descriptor of notify ep */
1da177e4
LT		 244 *dev_notify_ep_desc;
245 struct usb_endpoint_descriptor /* descriptor of in endpoint */
246 *dev_in_ep_desc;
247 struct usb_endpoint_descriptor /* descriptor of out endpoint */
248 *dev_out_ep_desc;
249 struct usb_request *dev_ctrl_req; /* control request */
250 struct list_head dev_req_list; /* list of write requests */
251 int dev_sched_port; /* round robin port scheduled */
252 struct gs_port *dev_port[GS_NUM_PORTS]; /* the ports */
253};
254
255
256/* Functions */
257
258/* module */
259static int __init gs_module_init(void);
260static void __exit gs_module_exit(void);
261
262/* tty driver */
263static int gs_open(struct tty_struct *tty, struct file *file);
264static void gs_close(struct tty_struct *tty, struct file *file);
265static int gs_write(struct tty_struct *tty,
266 const unsigned char *buf, int count);
267static void gs_put_char(struct tty_struct *tty, unsigned char ch);
268static void gs_flush_chars(struct tty_struct *tty);
269static int gs_write_room(struct tty_struct *tty);
270static int gs_chars_in_buffer(struct tty_struct *tty);
271static void gs_throttle(struct tty_struct * tty);
272static void gs_unthrottle(struct tty_struct * tty);
273static void gs_break(struct tty_struct *tty, int break_state);
274static int gs_ioctl(struct tty_struct *tty, struct file *file,
275 unsigned int cmd, unsigned long arg);
276static void gs_set_termios(struct tty_struct *tty, struct termios *old);
277
278static int gs_send(struct gs_dev *dev);
279static int gs_send_packet(struct gs_dev *dev, char *packet,
280 unsigned int size);
281static int gs_recv_packet(struct gs_dev *dev, char *packet,
282 unsigned int size);
283static void gs_read_complete(struct usb_ep *ep, struct usb_request *req);
284static void gs_write_complete(struct usb_ep *ep, struct usb_request *req);
285
286/* gadget driver */
287static int gs_bind(struct usb_gadget *gadget);
288static void gs_unbind(struct usb_gadget *gadget);
289static int gs_setup(struct usb_gadget *gadget,
290 const struct usb_ctrlrequest *ctrl);
291static int gs_setup_standard(struct usb_gadget *gadget,
292 const struct usb_ctrlrequest *ctrl);
293static int gs_setup_class(struct usb_gadget *gadget,
294 const struct usb_ctrlrequest *ctrl);
295static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
296static void gs_disconnect(struct usb_gadget *gadget);
297static int gs_set_config(struct gs_dev *dev, unsigned config);
298static void gs_reset_config(struct gs_dev *dev);
299static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
300 u8 type, unsigned int index, int is_otg);
301
302static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
55016f10 303 gfp_t kmalloc_flags);
1da177e4
LT		 304static void gs_free_req(struct usb_ep *ep, struct usb_request *req);
305
306static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len,
55016f10 307 gfp_t kmalloc_flags);
1da177e4
LT		 308static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req);
309
55016f10 310static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags);
1da177e4
LT		 311static void gs_free_ports(struct gs_dev *dev);
312
313/* circular buffer */
55016f10 314static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags);
1da177e4
LT		 315static void gs_buf_free(struct gs_buf *gb);
316static void gs_buf_clear(struct gs_buf *gb);
317static unsigned int gs_buf_data_avail(struct gs_buf *gb);
318static unsigned int gs_buf_space_avail(struct gs_buf *gb);
319static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf,
320 unsigned int count);
321static unsigned int gs_buf_get(struct gs_buf *gb, char *buf,
322 unsigned int count);
323
324/* external functions */
325extern int net2280_set_fifo_mode(struct usb_gadget *gadget, int mode);
326
327
328/* Globals */
329
330static struct gs_dev *gs_device;
331
332static const char *EP_IN_NAME;
333static const char *EP_OUT_NAME;
334static const char *EP_NOTIFY_NAME;
335
336static struct semaphore gs_open_close_sem[GS_NUM_PORTS];
337
338static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE;
339static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE;
340
341static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE;
342
343static unsigned int use_acm = GS_DEFAULT_USE_ACM;
344
345
346/* tty driver struct */
347static struct tty_operations gs_tty_ops = {
348 .open = gs_open,
349 .close = gs_close,
350 .write = gs_write,
351 .put_char = gs_put_char,
352 .flush_chars = gs_flush_chars,
353 .write_room = gs_write_room,
354 .ioctl = gs_ioctl,
355 .set_termios = gs_set_termios,
356 .throttle = gs_throttle,
357 .unthrottle = gs_unthrottle,
358 .break_ctl = gs_break,
359 .chars_in_buffer = gs_chars_in_buffer,
360};
361static struct tty_driver *gs_tty_driver;
362
363/* gadget driver struct */
364static struct usb_gadget_driver gs_gadget_driver = {
365#ifdef CONFIG_USB_GADGET_DUALSPEED
366 .speed = USB_SPEED_HIGH,
367#else
368 .speed = USB_SPEED_FULL,
369#endif /* CONFIG_USB_GADGET_DUALSPEED */
370 .function = GS_LONG_NAME,
371 .bind = gs_bind,
372 .unbind = gs_unbind,
373 .setup = gs_setup,
374 .disconnect = gs_disconnect,
375 .driver = {
376 .name = GS_SHORT_NAME,
377 /* .shutdown = ... */
378 /* .suspend = ... */
379 /* .resume = ... */
380 },
381};
382
383
384/* USB descriptors */
385
386#define GS_MANUFACTURER_STR_ID 1
387#define GS_PRODUCT_STR_ID 2
388#define GS_SERIAL_STR_ID 3
389#define GS_BULK_CONFIG_STR_ID 4
390#define GS_ACM_CONFIG_STR_ID 5
391#define GS_CONTROL_STR_ID 6
392#define GS_DATA_STR_ID 7
393
394/* static strings, in UTF-8 */
395static char manufacturer[50];
396static struct usb_string gs_strings[] = {
397 { GS_MANUFACTURER_STR_ID, manufacturer },
398 { GS_PRODUCT_STR_ID, GS_LONG_NAME },
399 { GS_SERIAL_STR_ID, "0" },
400 { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" },
401 { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" },
402 { GS_CONTROL_STR_ID, "Gadget Serial Control" },
403 { GS_DATA_STR_ID, "Gadget Serial Data" },
404 { } /* end of list */
405};
406
407static struct usb_gadget_strings gs_string_table = {
408 .language = 0x0409, /* en-us */
409 .strings = gs_strings,
410};
411
412static struct usb_device_descriptor gs_device_desc = {
413 .bLength = USB_DT_DEVICE_SIZE,
414 .bDescriptorType = USB_DT_DEVICE,
415 .bcdUSB = __constant_cpu_to_le16(0x0200),
416 .bDeviceSubClass = 0,
417 .bDeviceProtocol = 0,
418 .idVendor = __constant_cpu_to_le16(GS_VENDOR_ID),
419 .idProduct = __constant_cpu_to_le16(GS_PRODUCT_ID),
420 .iManufacturer = GS_MANUFACTURER_STR_ID,
421 .iProduct = GS_PRODUCT_STR_ID,
422 .iSerialNumber = GS_SERIAL_STR_ID,
423 .bNumConfigurations = GS_NUM_CONFIGS,
424};
425
426static struct usb_otg_descriptor gs_otg_descriptor = {
427 .bLength = sizeof(gs_otg_descriptor),
428 .bDescriptorType = USB_DT_OTG,
429 .bmAttributes = USB_OTG_SRP,
430};
431
432static struct usb_config_descriptor gs_bulk_config_desc = {
433 .bLength = USB_DT_CONFIG_SIZE,
434 .bDescriptorType = USB_DT_CONFIG,
435 /* .wTotalLength computed dynamically */
436 .bNumInterfaces = 1,
437 .bConfigurationValue = GS_BULK_CONFIG_ID,
438 .iConfiguration = GS_BULK_CONFIG_STR_ID,
439 .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
440 .bMaxPower = 1,
441};
442
443static struct usb_config_descriptor gs_acm_config_desc = {
444 .bLength = USB_DT_CONFIG_SIZE,
445 .bDescriptorType = USB_DT_CONFIG,
446 /* .wTotalLength computed dynamically */
447 .bNumInterfaces = 2,
448 .bConfigurationValue = GS_ACM_CONFIG_ID,
449 .iConfiguration = GS_ACM_CONFIG_STR_ID,
450 .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
451 .bMaxPower = 1,
452};
453
454static const struct usb_interface_descriptor gs_bulk_interface_desc = {
455 .bLength = USB_DT_INTERFACE_SIZE,
456 .bDescriptorType = USB_DT_INTERFACE,
457 .bInterfaceNumber = GS_BULK_INTERFACE_ID,
458 .bNumEndpoints = 2,
459 .bInterfaceClass = USB_CLASS_CDC_DATA,
460 .bInterfaceSubClass = 0,
461 .bInterfaceProtocol = 0,
462 .iInterface = GS_DATA_STR_ID,
463};
464
465static const struct usb_interface_descriptor gs_control_interface_desc = {
466 .bLength = USB_DT_INTERFACE_SIZE,
467 .bDescriptorType = USB_DT_INTERFACE,
468 .bInterfaceNumber = GS_CONTROL_INTERFACE_ID,
469 .bNumEndpoints = 1,
470 .bInterfaceClass = USB_CLASS_COMM,
471 .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
472 .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER,
473 .iInterface = GS_CONTROL_STR_ID,
474};
475
476static const struct usb_interface_descriptor gs_data_interface_desc = {
477 .bLength = USB_DT_INTERFACE_SIZE,
478 .bDescriptorType = USB_DT_INTERFACE,
479 .bInterfaceNumber = GS_DATA_INTERFACE_ID,
480 .bNumEndpoints = 2,
481 .bInterfaceClass = USB_CLASS_CDC_DATA,
482 .bInterfaceSubClass = 0,
483 .bInterfaceProtocol = 0,
484 .iInterface = GS_DATA_STR_ID,
485};
486
487static const struct usb_cdc_header_desc gs_header_desc = {
488 .bLength = sizeof(gs_header_desc),
489 .bDescriptorType = USB_DT_CS_INTERFACE,
490 .bDescriptorSubType = USB_CDC_HEADER_TYPE,
491 .bcdCDC = __constant_cpu_to_le16(0x0110),
492};
493
494static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = {
495 .bLength = sizeof(gs_call_mgmt_descriptor),
496 .bDescriptorType = USB_DT_CS_INTERFACE,
497 .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
498 .bmCapabilities = 0,
499 .bDataInterface = 1, /* index of data interface */
500};
501
502static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
503 .bLength = sizeof(gs_acm_descriptor),
504 .bDescriptorType = USB_DT_CS_INTERFACE,
505 .bDescriptorSubType = USB_CDC_ACM_TYPE,
506 .bmCapabilities = 0,
507};
508
509static const struct usb_cdc_union_desc gs_union_desc = {
510 .bLength = sizeof(gs_union_desc),
511 .bDescriptorType = USB_DT_CS_INTERFACE,
512 .bDescriptorSubType = USB_CDC_UNION_TYPE,
513 .bMasterInterface0 = 0, /* index of control interface */
514 .bSlaveInterface0 = 1, /* index of data interface */
515};
516
517static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
518 .bLength = USB_DT_ENDPOINT_SIZE,
519 .bDescriptorType = USB_DT_ENDPOINT,
520 .bEndpointAddress = USB_DIR_IN,
521 .bmAttributes = USB_ENDPOINT_XFER_INT,
522 .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
523 .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL,
524};
525
526static struct usb_endpoint_descriptor gs_fullspeed_in_desc = {
527 .bLength = USB_DT_ENDPOINT_SIZE,
528 .bDescriptorType = USB_DT_ENDPOINT,
529 .bEndpointAddress = USB_DIR_IN,
530 .bmAttributes = USB_ENDPOINT_XFER_BULK,
531};
532
533static struct usb_endpoint_descriptor gs_fullspeed_out_desc = {
534 .bLength = USB_DT_ENDPOINT_SIZE,
535 .bDescriptorType = USB_DT_ENDPOINT,
536 .bEndpointAddress = USB_DIR_OUT,
537 .bmAttributes = USB_ENDPOINT_XFER_BULK,
538};
539
540static const struct usb_descriptor_header *gs_bulk_fullspeed_function[] = {
541 (struct usb_descriptor_header *) &gs_otg_descriptor,
542 (struct usb_descriptor_header *) &gs_bulk_interface_desc,
543 (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
544 (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
545 NULL,
546};
547
548static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = {
549 (struct usb_descriptor_header *) &gs_otg_descriptor,
550 (struct usb_descriptor_header *) &gs_control_interface_desc,
551 (struct usb_descriptor_header *) &gs_header_desc,
552 (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
553 (struct usb_descriptor_header *) &gs_acm_descriptor,
554 (struct usb_descriptor_header *) &gs_union_desc,
555 (struct usb_descriptor_header *) &gs_fullspeed_notify_desc,
556 (struct usb_descriptor_header *) &gs_data_interface_desc,
557 (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
558 (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
559 NULL,
560};
561
562#ifdef CONFIG_USB_GADGET_DUALSPEED
563static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
564 .bLength = USB_DT_ENDPOINT_SIZE,
565 .bDescriptorType = USB_DT_ENDPOINT,
566 .bEndpointAddress = USB_DIR_IN,
567 .bmAttributes = USB_ENDPOINT_XFER_INT,
568 .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
569 .bInterval = GS_LOG2_NOTIFY_INTERVAL+4,
570};
571
572static struct usb_endpoint_descriptor gs_highspeed_in_desc = {
573 .bLength = USB_DT_ENDPOINT_SIZE,
574 .bDescriptorType = USB_DT_ENDPOINT,
575 .bmAttributes = USB_ENDPOINT_XFER_BULK,
576 .wMaxPacketSize = __constant_cpu_to_le16(512),
577};
578
579static struct usb_endpoint_descriptor gs_highspeed_out_desc = {
580 .bLength = USB_DT_ENDPOINT_SIZE,
581 .bDescriptorType = USB_DT_ENDPOINT,
582 .bmAttributes = USB_ENDPOINT_XFER_BULK,
583 .wMaxPacketSize = __constant_cpu_to_le16(512),
584};
585
586static struct usb_qualifier_descriptor gs_qualifier_desc = {
587 .bLength = sizeof(struct usb_qualifier_descriptor),
588 .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
589 .bcdUSB = __constant_cpu_to_le16 (0x0200),
590 /* assumes ep0 uses the same value for both speeds ... */
591 .bNumConfigurations = GS_NUM_CONFIGS,
592};
593
594static const struct usb_descriptor_header *gs_bulk_highspeed_function[] = {
595 (struct usb_descriptor_header *) &gs_otg_descriptor,
596 (struct usb_descriptor_header *) &gs_bulk_interface_desc,
597 (struct usb_descriptor_header *) &gs_highspeed_in_desc,
598 (struct usb_descriptor_header *) &gs_highspeed_out_desc,
599 NULL,
600};
601
602static const struct usb_descriptor_header *gs_acm_highspeed_function[] = {
603 (struct usb_descriptor_header *) &gs_otg_descriptor,
604 (struct usb_descriptor_header *) &gs_control_interface_desc,
605 (struct usb_descriptor_header *) &gs_header_desc,
606 (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
607 (struct usb_descriptor_header *) &gs_acm_descriptor,
608 (struct usb_descriptor_header *) &gs_union_desc,
609 (struct usb_descriptor_header *) &gs_highspeed_notify_desc,
610 (struct usb_descriptor_header *) &gs_data_interface_desc,
611 (struct usb_descriptor_header *) &gs_highspeed_in_desc,
612 (struct usb_descriptor_header *) &gs_highspeed_out_desc,
613 NULL,
614};
615
616#endif /* CONFIG_USB_GADGET_DUALSPEED */
617
618
619/* Module */
620MODULE_DESCRIPTION(GS_LONG_NAME);
621MODULE_AUTHOR("Al Borchers");
622MODULE_LICENSE("GPL");
623
624#ifdef GS_DEBUG
625module_param(debug, int, S_IRUGO|S_IWUSR);
626MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
627#endif
628
629module_param(read_q_size, uint, S_IRUGO);
630MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32");
631
632module_param(write_q_size, uint, S_IRUGO);
633MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32");
634
635module_param(write_buf_size, uint, S_IRUGO);
636MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192");
637
638module_param(use_acm, uint, S_IRUGO);
639MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no");
640
641module_init(gs_module_init);
642module_exit(gs_module_exit);
643
644/*
645* gs_module_init
646*
647* Register as a USB gadget driver and a tty driver.
648*/
649static int __init gs_module_init(void)
650{
651 int i;
652 int retval;
653
654 retval = usb_gadget_register_driver(&gs_gadget_driver);
655 if (retval) {
656 printk(KERN_ERR "gs_module_init: cannot register gadget driver, ret=%d\n", retval);
657 return retval;
658 }
659
660 gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS);
661 if (!gs_tty_driver)
662 return -ENOMEM;
663 gs_tty_driver->owner = THIS_MODULE;
664 gs_tty_driver->driver_name = GS_SHORT_NAME;
665 gs_tty_driver->name = "ttygs";
666 gs_tty_driver->devfs_name = "usb/ttygs/";
667 gs_tty_driver->major = GS_MAJOR;
668 gs_tty_driver->minor_start = GS_MINOR_START;
669 gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
670 gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
671 gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
672 gs_tty_driver->init_termios = tty_std_termios;
673 gs_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
674 tty_set_operations(gs_tty_driver, &gs_tty_ops);
675
676 for (i=0; i < GS_NUM_PORTS; i++)
677 sema_init(&gs_open_close_sem[i], 1);
678
679 retval = tty_register_driver(gs_tty_driver);
680 if (retval) {
681 usb_gadget_unregister_driver(&gs_gadget_driver);
682 put_tty_driver(gs_tty_driver);
683 printk(KERN_ERR "gs_module_init: cannot register tty driver, ret=%d\n", retval);
684 return retval;
685 }
686
687 printk(KERN_INFO "gs_module_init: %s %s loaded\n", GS_LONG_NAME, GS_VERSION_STR);
688 return 0;
689}
690
691/*
692* gs_module_exit
693*
694* Unregister as a tty driver and a USB gadget driver.
695*/
696static void __exit gs_module_exit(void)
697{
698 tty_unregister_driver(gs_tty_driver);
699 put_tty_driver(gs_tty_driver);
700 usb_gadget_unregister_driver(&gs_gadget_driver);
701
702 printk(KERN_INFO "gs_module_exit: %s %s unloaded\n", GS_LONG_NAME, GS_VERSION_STR);
703}
704
705/* TTY Driver */
706
707/*
708 * gs_open
709 */
710static int gs_open(struct tty_struct *tty, struct file *file)
711{
712 int port_num;
713 unsigned long flags;
714 struct gs_port *port;
715 struct gs_dev *dev;
716 struct gs_buf *buf;
717 struct semaphore *sem;
718 int ret;
719
720 port_num = tty->index;
721
722 gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file);
723
724 if (port_num < 0 || port_num >= GS_NUM_PORTS) {
725 printk(KERN_ERR "gs_open: (%d,%p,%p) invalid port number\n",
726 port_num, tty, file);
727 return -ENODEV;
728 }
729
730 dev = gs_device;
731
732 if (dev == NULL) {
733 printk(KERN_ERR "gs_open: (%d,%p,%p) NULL device pointer\n",
734 port_num, tty, file);
735 return -ENODEV;
736 }
737
738 sem = &gs_open_close_sem[port_num];
739 if (down_interruptible(sem)) {
740 printk(KERN_ERR
741 "gs_open: (%d,%p,%p) interrupted waiting for semaphore\n",
742 port_num, tty, file);
743 return -ERESTARTSYS;
744 }
745
746 spin_lock_irqsave(&dev->dev_lock, flags);
747
748 if (dev->dev_config == GS_NO_CONFIG_ID) {
749 printk(KERN_ERR
750 "gs_open: (%d,%p,%p) device is not connected\n",
751 port_num, tty, file);
752 ret = -ENODEV;
753 goto exit_unlock_dev;
754 }
755
756 port = dev->dev_port[port_num];
757
758 if (port == NULL) {
759 printk(KERN_ERR "gs_open: (%d,%p,%p) NULL port pointer\n",
760 port_num, tty, file);
761 ret = -ENODEV;
762 goto exit_unlock_dev;
763 }
764
765 spin_lock(&port->port_lock);
766 spin_unlock(&dev->dev_lock);
767
768 if (port->port_dev == NULL) {
769 printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (1)\n",
770 port_num, tty, file);
771 ret = -EIO;
772 goto exit_unlock_port;
773 }
774
775 if (port->port_open_count > 0) {
776 ++port->port_open_count;
777 gs_debug("gs_open: (%d,%p,%p) already open\n",
778 port_num, tty, file);
779 ret = 0;
780 goto exit_unlock_port;
781 }
782
783 tty->driver_data = NULL;
784
785 /* mark port as in use, we can drop port lock and sleep if necessary */
786 port->port_in_use = 1;
787
788 /* allocate write buffer on first open */
789 if (port->port_write_buf == NULL) {
790 spin_unlock_irqrestore(&port->port_lock, flags);
791 buf = gs_buf_alloc(write_buf_size, GFP_KERNEL);
792 spin_lock_irqsave(&port->port_lock, flags);
793
794 /* might have been disconnected while asleep, check */
795 if (port->port_dev == NULL) {
796 printk(KERN_ERR
797 "gs_open: (%d,%p,%p) port disconnected (2)\n",
798 port_num, tty, file);
799 port->port_in_use = 0;
800 ret = -EIO;
801 goto exit_unlock_port;
802 }
803
804 if ((port->port_write_buf=buf) == NULL) {
805 printk(KERN_ERR "gs_open: (%d,%p,%p) cannot allocate port write buffer\n",
806 port_num, tty, file);
807 port->port_in_use = 0;
808 ret = -ENOMEM;
809 goto exit_unlock_port;
810 }
811
812 }
813
814 /* wait for carrier detect (not implemented) */
815
816 /* might have been disconnected while asleep, check */
817 if (port->port_dev == NULL) {
818 printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (3)\n",
819 port_num, tty, file);
820 port->port_in_use = 0;
821 ret = -EIO;
822 goto exit_unlock_port;
823 }
824
825 tty->driver_data = port;
826 port->port_tty = tty;
827 port->port_open_count = 1;
828 port->port_in_use = 0;
829
830 gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file);
831
832 ret = 0;
833
834exit_unlock_port:
835 spin_unlock_irqrestore(&port->port_lock, flags);
836 up(sem);
837 return ret;
838
839exit_unlock_dev:
840 spin_unlock_irqrestore(&dev->dev_lock, flags);
841 up(sem);
842 return ret;
843
844}
845
846/*
847 * gs_close
848 */
849static void gs_close(struct tty_struct *tty, struct file *file)
850{
851 unsigned long flags;
852 struct gs_port *port = tty->driver_data;
853 struct semaphore *sem;
854
855 if (port == NULL) {
856 printk(KERN_ERR "gs_close: NULL port pointer\n");
857 return;
858 }
859
860 gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file);
861
862 sem = &gs_open_close_sem[port->port_num];
863 down(sem);
864
865 spin_lock_irqsave(&port->port_lock, flags);
866
867 if (port->port_open_count == 0) {
868 printk(KERN_ERR
869 "gs_close: (%d,%p,%p) port is already closed\n",
870 port->port_num, tty, file);
871 goto exit;
872 }
873
874 if (port->port_open_count > 1) {
875 --port->port_open_count;
876 goto exit;
877 }
878
879 /* free disconnected port on final close */
880 if (port->port_dev == NULL) {
881 kfree(port);
882 goto exit;
883 }
884
885 /* mark port as closed but in use, we can drop port lock */
886 /* and sleep if necessary */
887 port->port_in_use = 1;
888 port->port_open_count = 0;
889
890 /* wait for write buffer to drain, or */
891 /* at most GS_CLOSE_TIMEOUT seconds */
892 if (gs_buf_data_avail(port->port_write_buf) > 0) {
949bf643 893 spin_unlock_irqrestore(&port->port_lock, flags);
1da177e4
LT		 894 wait_cond_interruptible_timeout(port->port_write_wait,
895 port->port_dev == NULL
896 || gs_buf_data_avail(port->port_write_buf) == 0,
897 &port->port_lock, flags, GS_CLOSE_TIMEOUT * HZ);
949bf643 898 spin_lock_irqsave(&port->port_lock, flags);
1da177e4
LT		 899 }
900
901 /* free disconnected port on final close */
902 /* (might have happened during the above sleep) */
903 if (port->port_dev == NULL) {
904 kfree(port);
905 goto exit;
906 }
907
908 gs_buf_clear(port->port_write_buf);
909
910 tty->driver_data = NULL;
911 port->port_tty = NULL;
912 port->port_in_use = 0;
913
914 gs_debug("gs_close: (%d,%p,%p) completed\n",
915 port->port_num, tty, file);
916
917exit:
918 spin_unlock_irqrestore(&port->port_lock, flags);
919 up(sem);
920}
921
922/*
923 * gs_write
924 */
925static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
926{
927 unsigned long flags;
928 struct gs_port *port = tty->driver_data;
929 int ret;
930
931 if (port == NULL) {
932 printk(KERN_ERR "gs_write: NULL port pointer\n");
933 return -EIO;
934 }
935
936 gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty,
937 count);
938
939 if (count == 0)
940 return 0;
941
942 spin_lock_irqsave(&port->port_lock, flags);
943
944 if (port->port_dev == NULL) {
945 printk(KERN_ERR "gs_write: (%d,%p) port is not connected\n",
946 port->port_num, tty);
947 ret = -EIO;
948 goto exit;
949 }
950
951 if (port->port_open_count == 0) {
952 printk(KERN_ERR "gs_write: (%d,%p) port is closed\n",
953 port->port_num, tty);
954 ret = -EBADF;
955 goto exit;
956 }
957
958 count = gs_buf_put(port->port_write_buf, buf, count);
959
960 spin_unlock_irqrestore(&port->port_lock, flags);
961
962 gs_send(gs_device);
963
964 gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty,
965 count);
966
967 return count;
968
969exit:
970 spin_unlock_irqrestore(&port->port_lock, flags);
971 return ret;
972}
973
974/*
975 * gs_put_char
976 */
977static void gs_put_char(struct tty_struct *tty, unsigned char ch)
978{
979 unsigned long flags;
980 struct gs_port *port = tty->driver_data;
981
982 if (port == NULL) {
983 printk(KERN_ERR "gs_put_char: NULL port pointer\n");
984 return;
985 }
986
987 gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2));
988
989 spin_lock_irqsave(&port->port_lock, flags);
990
991 if (port->port_dev == NULL) {
992 printk(KERN_ERR "gs_put_char: (%d,%p) port is not connected\n",
993 port->port_num, tty);
994 goto exit;
995 }
996
997 if (port->port_open_count == 0) {
998 printk(KERN_ERR "gs_put_char: (%d,%p) port is closed\n",
999 port->port_num, tty);
1000 goto exit;
1001 }
1002
1003 gs_buf_put(port->port_write_buf, &ch, 1);
1004
1005exit:
1006 spin_unlock_irqrestore(&port->port_lock, flags);
1007}
1008
1009/*
1010 * gs_flush_chars
1011 */
1012static void gs_flush_chars(struct tty_struct *tty)
1013{
1014 unsigned long flags;
1015 struct gs_port *port = tty->driver_data;
1016
1017 if (port == NULL) {
1018 printk(KERN_ERR "gs_flush_chars: NULL port pointer\n");
1019 return;
1020 }
1021
1022 gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
1023
1024 spin_lock_irqsave(&port->port_lock, flags);
1025
1026 if (port->port_dev == NULL) {
1027 printk(KERN_ERR
1028 "gs_flush_chars: (%d,%p) port is not connected\n",
1029 port->port_num, tty);
1030 goto exit;
1031 }
1032
1033 if (port->port_open_count == 0) {
1034 printk(KERN_ERR "gs_flush_chars: (%d,%p) port is closed\n",
1035 port->port_num, tty);
1036 goto exit;
1037 }
1038
1039 spin_unlock_irqrestore(&port->port_lock, flags);
1040
1041 gs_send(gs_device);
1042
1043 return;
1044
1045exit:
1046 spin_unlock_irqrestore(&port->port_lock, flags);
1047}
1048
1049/*
1050 * gs_write_room
1051 */
1052static int gs_write_room(struct tty_struct *tty)
1053{
1054
1055 int room = 0;
1056 unsigned long flags;
1057 struct gs_port *port = tty->driver_data;
1058
1059
1060 if (port == NULL)
1061 return 0;
1062
1063 spin_lock_irqsave(&port->port_lock, flags);
1064
1065 if (port->port_dev != NULL && port->port_open_count > 0
1066 && port->port_write_buf != NULL)
1067 room = gs_buf_space_avail(port->port_write_buf);
1068
1069 spin_unlock_irqrestore(&port->port_lock, flags);
1070
1071 gs_debug("gs_write_room: (%d,%p) room=%d\n",
1072 port->port_num, tty, room);
1073
1074 return room;
1075}
1076
1077/*
1078 * gs_chars_in_buffer
1079 */
1080static int gs_chars_in_buffer(struct tty_struct *tty)
1081{
1082 int chars = 0;
1083 unsigned long flags;
1084 struct gs_port *port = tty->driver_data;
1085
1086 if (port == NULL)
1087 return 0;
1088
1089 spin_lock_irqsave(&port->port_lock, flags);
1090
1091 if (port->port_dev != NULL && port->port_open_count > 0
1092 && port->port_write_buf != NULL)
1093 chars = gs_buf_data_avail(port->port_write_buf);
1094
1095 spin_unlock_irqrestore(&port->port_lock, flags);
1096
1097 gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
1098 port->port_num, tty, chars);
1099
1100 return chars;
1101}
1102
1103/*
1104 * gs_throttle
1105 */
1106static void gs_throttle(struct tty_struct *tty)
1107{
1108}
1109
1110/*
1111 * gs_unthrottle
1112 */
1113static void gs_unthrottle(struct tty_struct *tty)
1114{
1115}
1116
1117/*
1118 * gs_break
1119 */
1120static void gs_break(struct tty_struct *tty, int break_state)
1121{
1122}
1123
1124/*
1125 * gs_ioctl
1126 */
1127static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
1128{
1129 struct gs_port *port = tty->driver_data;
1130
1131 if (port == NULL) {
1132 printk(KERN_ERR "gs_ioctl: NULL port pointer\n");
1133 return -EIO;
1134 }
1135
1136 gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n",
1137 port->port_num, tty, file, cmd, arg);
1138
1139 /* handle ioctls */
1140
1141 /* could not handle ioctl */
1142 return -ENOIOCTLCMD;
1143}
1144
1145/*
1146 * gs_set_termios
1147 */
1148static void gs_set_termios(struct tty_struct *tty, struct termios *old)
1149{
1150}
1151
1152/*
1153* gs_send
1154*
1155* This function finds available write requests, calls
1156* gs_send_packet to fill these packets with data, and
1157* continues until either there are no more write requests
1158* available or no more data to send. This function is
1159* run whenever data arrives or write requests are available.
1160*/
1161static int gs_send(struct gs_dev *dev)
1162{
1163 int ret,len;
1164 unsigned long flags;
1165 struct usb_ep *ep;
1166 struct usb_request *req;
1167 struct gs_req_entry *req_entry;
1168
1169 if (dev == NULL) {
1170 printk(KERN_ERR "gs_send: NULL device pointer\n");
1171 return -ENODEV;
1172 }
1173
1174 spin_lock_irqsave(&dev->dev_lock, flags);
1175
1176 ep = dev->dev_in_ep;
1177
1178 while(!list_empty(&dev->dev_req_list)) {
1179
1180 req_entry = list_entry(dev->dev_req_list.next,
1181 struct gs_req_entry, re_entry);
1182
1183 req = req_entry->re_req;
1184
1185 len = gs_send_packet(dev, req->buf, ep->maxpacket);
1186
1187 if (len > 0) {
1188gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2));
1189 list_del(&req_entry->re_entry);
1190 req->length = len;
1191 if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1192 printk(KERN_ERR
1193 "gs_send: cannot queue read request, ret=%d\n",
1194 ret);
1195 break;
1196 }
1197 } else {
1198 break;
1199 }
1200
1201 }
1202
1203 spin_unlock_irqrestore(&dev->dev_lock, flags);
1204
1205 return 0;
1206}
1207
1208/*
1209 * gs_send_packet
1210 *
1211 * If there is data to send, a packet is built in the given
1212 * buffer and the size is returned. If there is no data to
1213 * send, 0 is returned. If there is any error a negative
1214 * error number is returned.
1215 *
1216 * Called during USB completion routine, on interrupt time.
1217 *
1218 * We assume that disconnect will not happen until all completion
1219 * routines have completed, so we can assume that the dev_port
1220 * array does not change during the lifetime of this function.
1221 */
1222static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size)
1223{
1224 unsigned int len;
1225 struct gs_port *port;
1226
1227 /* TEMPORARY -- only port 0 is supported right now */
1228 port = dev->dev_port[0];
1229
1230 if (port == NULL) {
1231 printk(KERN_ERR
1232 "gs_send_packet: port=%d, NULL port pointer\n",
1233 0);
1234 return -EIO;
1235 }
1236
1237 spin_lock(&port->port_lock);
1238
1239 len = gs_buf_data_avail(port->port_write_buf);
1240 if (len < size)
1241 size = len;
1242
1243 if (size == 0)
1244 goto exit;
1245
1246 size = gs_buf_get(port->port_write_buf, packet, size);
1247
1248 if (port->port_tty)
1249 wake_up_interruptible(&port->port_tty->write_wait);
1250
1251exit:
1252 spin_unlock(&port->port_lock);
1253 return size;
1254}
1255
1256/*
1257 * gs_recv_packet
1258 *
1259 * Called for each USB packet received. Reads the packet
1260 * header and stuffs the data in the appropriate tty buffer.
1261 * Returns 0 if successful, or a negative error number.
1262 *
1263 * Called during USB completion routine, on interrupt time.
1264 *
1265 * We assume that disconnect will not happen until all completion
1266 * routines have completed, so we can assume that the dev_port
1267 * array does not change during the lifetime of this function.
1268 */
1269static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size)
1270{
1271 unsigned int len;
1272 struct gs_port *port;
1273 int ret;
33f0f88f 1274 struct tty_struct *tty;
1da177e4
LT		 1275
1276 /* TEMPORARY -- only port 0 is supported right now */
1277 port = dev->dev_port[0];
1278
1279 if (port == NULL) {
1280 printk(KERN_ERR "gs_recv_packet: port=%d, NULL port pointer\n",
1281 port->port_num);
1282 return -EIO;
1283 }
1284
1285 spin_lock(&port->port_lock);
1286
1287 if (port->port_open_count == 0) {
1288 printk(KERN_ERR "gs_recv_packet: port=%d, port is closed\n",
1289 port->port_num);
1290 ret = -EIO;
1291 goto exit;
1292 }
1293
33f0f88f
AC		 1294
1295 tty = port->port_tty;
1296
1297 if (tty == NULL) {
1da177e4
LT		 1298 printk(KERN_ERR "gs_recv_packet: port=%d, NULL tty pointer\n",
1299 port->port_num);
1300 ret = -EIO;
1301 goto exit;
1302 }
1303
1304 if (port->port_tty->magic != TTY_MAGIC) {
1305 printk(KERN_ERR "gs_recv_packet: port=%d, bad tty magic\n",
1306 port->port_num);
1307 ret = -EIO;
1308 goto exit;
1309 }
1310
33f0f88f
AC		 1311 len = tty_buffer_request_room(tty, size);
1312 if (len > 0) {
1313 tty_insert_flip_string(tty, packet, len);
1da177e4
LT		 1314 tty_flip_buffer_push(port->port_tty);
1315 wake_up_interruptible(&port->port_tty->read_wait);
1316 }
1da177e4 1317 ret = 0;
1da177e4
LT		 1318exit:
1319 spin_unlock(&port->port_lock);
1320 return ret;
1321}
1322
1323/*
1324* gs_read_complete
1325*/
1326static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
1327{
1328 int ret;
1329 struct gs_dev *dev = ep->driver_data;
1330
1331 if (dev == NULL) {
1332 printk(KERN_ERR "gs_read_complete: NULL device pointer\n");
1333 return;
1334 }
1335
1336 switch(req->status) {
1337 case 0:
1338 /* normal completion */
1339 gs_recv_packet(dev, req->buf, req->actual);
1340requeue:
1341 req->length = ep->maxpacket;
1342 if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1343 printk(KERN_ERR
1344 "gs_read_complete: cannot queue read request, ret=%d\n",
1345 ret);
1346 }
1347 break;
1348
1349 case -ESHUTDOWN:
1350 /* disconnect */
1351 gs_debug("gs_read_complete: shutdown\n");
1352 gs_free_req(ep, req);
1353 break;
1354
1355 default:
1356 /* unexpected */
1357 printk(KERN_ERR
1358 "gs_read_complete: unexpected status error, status=%d\n",
1359 req->status);
1360 goto requeue;
1361 break;
1362 }
1363}
1364
1365/*
1366* gs_write_complete
1367*/
1368static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
1369{
1370 struct gs_dev *dev = ep->driver_data;
1371 struct gs_req_entry *gs_req = req->context;
1372
1373 if (dev == NULL) {
1374 printk(KERN_ERR "gs_write_complete: NULL device pointer\n");
1375 return;
1376 }
1377
1378 switch(req->status) {
1379 case 0:
1380 /* normal completion */
1381requeue:
1382 if (gs_req == NULL) {
1383 printk(KERN_ERR
1384 "gs_write_complete: NULL request pointer\n");
1385 return;
1386 }
1387
1388 spin_lock(&dev->dev_lock);
1389 list_add(&gs_req->re_entry, &dev->dev_req_list);
1390 spin_unlock(&dev->dev_lock);
1391
1392 gs_send(dev);
1393
1394 break;
1395
1396 case -ESHUTDOWN:
1397 /* disconnect */
1398 gs_debug("gs_write_complete: shutdown\n");
1399 gs_free_req(ep, req);
1400 break;
1401
1402 default:
1403 printk(KERN_ERR
1404 "gs_write_complete: unexpected status error, status=%d\n",
1405 req->status);
1406 goto requeue;
1407 break;
1408 }
1409}
1410
1411/* Gadget Driver */
1412
1413/*
1414 * gs_bind
1415 *
1416 * Called on module load. Allocates and initializes the device
1417 * structure and a control request.
1418 */
1419static int gs_bind(struct usb_gadget *gadget)
1420{
1421 int ret;
1422 struct usb_ep *ep;
1423 struct gs_dev *dev;
91e79c91 1424 int gcnum;
1da177e4 1425
91e79c91
DB		 1426 /* Some controllers can't support CDC ACM:
1427 * - sh doesn't support multiple interfaces or configs;
1428 * - sa1100 doesn't have a third interrupt endpoint
1429 */
1430 if (gadget_is_sh(gadget) || gadget_is_sa1100(gadget))
1da177e4 1431 use_acm = 0;
91e79c91
DB		 1432
1433 gcnum = usb_gadget_controller_number(gadget);
1434 if (gcnum >= 0)
1da177e4 1435 gs_device_desc.bcdDevice =
91e79c91
DB		 1436 cpu_to_le16(GS_VERSION_NUM | gcnum);
1437 else {
1da177e4
LT		 1438 printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n",
1439 gadget->name);
1440 /* unrecognized, but safe unless bulk is REALLY quirky */
1441 gs_device_desc.bcdDevice =
1442 __constant_cpu_to_le16(GS_VERSION_NUM|0x0099);
1443 }
1444
1445 usb_ep_autoconfig_reset(gadget);
1446
1447 ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
1448 if (!ep)
1449 goto autoconf_fail;
1450 EP_IN_NAME = ep->name;
1451 ep->driver_data = ep; /* claim the endpoint */
1452
1453 ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
1454 if (!ep)
1455 goto autoconf_fail;
1456 EP_OUT_NAME = ep->name;
1457 ep->driver_data = ep; /* claim the endpoint */
1458
1459 if (use_acm) {
1460 ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
1461 if (!ep) {
1462 printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name);
1463 goto autoconf_fail;
1464 }
1465 gs_device_desc.idProduct = __constant_cpu_to_le16(
1466 GS_CDC_PRODUCT_ID),
1467 EP_NOTIFY_NAME = ep->name;
1468 ep->driver_data = ep; /* claim the endpoint */
1469 }
1470
1471 gs_device_desc.bDeviceClass = use_acm
1472 ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
1473 gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
1474
1475#ifdef CONFIG_USB_GADGET_DUALSPEED
1476 gs_qualifier_desc.bDeviceClass = use_acm
1477 ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
1478 /* assume ep0 uses the same packet size for both speeds */
1479 gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0;
1480 /* assume endpoints are dual-speed */
1481 gs_highspeed_notify_desc.bEndpointAddress =
1482 gs_fullspeed_notify_desc.bEndpointAddress;
1483 gs_highspeed_in_desc.bEndpointAddress =
1484 gs_fullspeed_in_desc.bEndpointAddress;
1485 gs_highspeed_out_desc.bEndpointAddress =
1486 gs_fullspeed_out_desc.bEndpointAddress;
1487#endif /* CONFIG_USB_GADGET_DUALSPEED */
1488
1489 usb_gadget_set_selfpowered(gadget);
1490
1491 if (gadget->is_otg) {
1492 gs_otg_descriptor.bmAttributes |= USB_OTG_HNP,
1493 gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1494 gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1495 }
1496
1497 gs_device = dev = kmalloc(sizeof(struct gs_dev), GFP_KERNEL);
1498 if (dev == NULL)
1499 return -ENOMEM;
1500
1501 snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
1502 system_utsname.sysname, system_utsname.release,
1503 gadget->name);
1504
1505 memset(dev, 0, sizeof(struct gs_dev));
1506 dev->dev_gadget = gadget;
1507 spin_lock_init(&dev->dev_lock);
1508 INIT_LIST_HEAD(&dev->dev_req_list);
1509 set_gadget_data(gadget, dev);
1510
1511 if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) {
1512 printk(KERN_ERR "gs_bind: cannot allocate ports\n");
1513 gs_unbind(gadget);
1514 return ret;
1515 }
1516
1517 /* preallocate control response and buffer */
1518 dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN,
1519 GFP_KERNEL);
1520 if (dev->dev_ctrl_req == NULL) {
1521 gs_unbind(gadget);
1522 return -ENOMEM;
1523 }
1524 dev->dev_ctrl_req->complete = gs_setup_complete;
1525
1526 gadget->ep0->driver_data = dev;
1527
1528 printk(KERN_INFO "gs_bind: %s %s bound\n",
1529 GS_LONG_NAME, GS_VERSION_STR);
1530
1531 return 0;
1532
1533autoconf_fail:
1534 printk(KERN_ERR "gs_bind: cannot autoconfigure on %s\n", gadget->name);
1535 return -ENODEV;
1536}
1537
1538/*
1539 * gs_unbind
1540 *
1541 * Called on module unload. Frees the control request and device
1542 * structure.
1543 */
1544static void gs_unbind(struct usb_gadget *gadget)
1545{
1546 struct gs_dev *dev = get_gadget_data(gadget);
1547
1548 gs_device = NULL;
1549
1550 /* read/write requests already freed, only control request remains */
1551 if (dev != NULL) {
1552 if (dev->dev_ctrl_req != NULL) {
1553 gs_free_req(gadget->ep0, dev->dev_ctrl_req);
1554 dev->dev_ctrl_req = NULL;
1555 }
1556 gs_free_ports(dev);
1557 kfree(dev);
1558 set_gadget_data(gadget, NULL);
1559 }
1560
1561 printk(KERN_INFO "gs_unbind: %s %s unbound\n", GS_LONG_NAME,
1562 GS_VERSION_STR);
1563}
1564
1565/*
1566 * gs_setup
1567 *
1568 * Implements all the control endpoint functionality that's not
1569 * handled in hardware or the hardware driver.
1570 *
1571 * Returns the size of the data sent to the host, or a negative
1572 * error number.
1573 */
1574static int gs_setup(struct usb_gadget *gadget,
1575 const struct usb_ctrlrequest *ctrl)
1576{
1577 int ret = -EOPNOTSUPP;
1578 struct gs_dev *dev = get_gadget_data(gadget);
1579 struct usb_request *req = dev->dev_ctrl_req;
1bbc1696
DB		 1580 u16 wIndex = le16_to_cpu(ctrl->wIndex);
1581 u16 wValue = le16_to_cpu(ctrl->wValue);
1582 u16 wLength = le16_to_cpu(ctrl->wLength);
1da177e4
LT		 1583
1584 switch (ctrl->bRequestType & USB_TYPE_MASK) {
1585 case USB_TYPE_STANDARD:
1586 ret = gs_setup_standard(gadget,ctrl);
1587 break;
1588
1589 case USB_TYPE_CLASS:
1590 ret = gs_setup_class(gadget,ctrl);
1591 break;
1592
1593 default:
1594 printk(KERN_ERR "gs_setup: unknown request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1595 ctrl->bRequestType, ctrl->bRequest,
1596 wValue, wIndex, wLength);
1597 break;
1598 }
1599
1600 /* respond with data transfer before status phase? */
1601 if (ret >= 0) {
1602 req->length = ret;
1603 req->zero = ret < wLength
1604 && (ret % gadget->ep0->maxpacket) == 0;
1605 ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
1606 if (ret < 0) {
1607 printk(KERN_ERR "gs_setup: cannot queue response, ret=%d\n",
1608 ret);
1609 req->status = 0;
1610 gs_setup_complete(gadget->ep0, req);
1611 }
1612 }
1613
1614 /* device either stalls (ret < 0) or reports success */
1615 return ret;
1616}
1617
1618static int gs_setup_standard(struct usb_gadget *gadget,
1619 const struct usb_ctrlrequest *ctrl)
1620{
1621 int ret = -EOPNOTSUPP;
1622 struct gs_dev *dev = get_gadget_data(gadget);
1623 struct usb_request *req = dev->dev_ctrl_req;
1bbc1696
DB		 1624 u16 wIndex = le16_to_cpu(ctrl->wIndex);
1625 u16 wValue = le16_to_cpu(ctrl->wValue);
1626 u16 wLength = le16_to_cpu(ctrl->wLength);
1da177e4
LT		 1627
1628 switch (ctrl->bRequest) {
1629 case USB_REQ_GET_DESCRIPTOR:
1630 if (ctrl->bRequestType != USB_DIR_IN)
1631 break;
1632
1633 switch (wValue >> 8) {
1634 case USB_DT_DEVICE:
1635 ret = min(wLength,
1636 (u16)sizeof(struct usb_device_descriptor));
1637 memcpy(req->buf, &gs_device_desc, ret);
1638 break;
1639
1640#ifdef CONFIG_USB_GADGET_DUALSPEED
1641 case USB_DT_DEVICE_QUALIFIER:
1642 if (!gadget->is_dualspeed)
1643 break;
1644 ret = min(wLength,
1645 (u16)sizeof(struct usb_qualifier_descriptor));
1646 memcpy(req->buf, &gs_qualifier_desc, ret);
1647 break;
1648
1649 case USB_DT_OTHER_SPEED_CONFIG:
1650 if (!gadget->is_dualspeed)
1651 break;
1652 /* fall through */
1653#endif /* CONFIG_USB_GADGET_DUALSPEED */
1654 case USB_DT_CONFIG:
1655 ret = gs_build_config_buf(req->buf, gadget->speed,
1656 wValue >> 8, wValue & 0xff,
1657 gadget->is_otg);
1658 if (ret >= 0)
1659 ret = min(wLength, (u16)ret);
1660 break;
1661
1662 case USB_DT_STRING:
1663 /* wIndex == language code. */
1664 ret = usb_gadget_get_string(&gs_string_table,
1665 wValue & 0xff, req->buf);
1666 if (ret >= 0)
1667 ret = min(wLength, (u16)ret);
1668 break;
1669 }
1670 break;
1671
1672 case USB_REQ_SET_CONFIGURATION:
1673 if (ctrl->bRequestType != 0)
1674 break;
1675 spin_lock(&dev->dev_lock);
1676 ret = gs_set_config(dev, wValue);
1677 spin_unlock(&dev->dev_lock);
1678 break;
1679
1680 case USB_REQ_GET_CONFIGURATION:
1681 if (ctrl->bRequestType != USB_DIR_IN)
1682 break;
1683 *(u8 *)req->buf = dev->dev_config;
1684 ret = min(wLength, (u16)1);
1685 break;
1686
1687 case USB_REQ_SET_INTERFACE:
1688 if (ctrl->bRequestType != USB_RECIP_INTERFACE
1689 || !dev->dev_config
1690 || wIndex >= GS_MAX_NUM_INTERFACES)
1691 break;
1692 if (dev->dev_config == GS_BULK_CONFIG_ID
1693 && wIndex != GS_BULK_INTERFACE_ID)
1694 break;
1695 /* no alternate interface settings */
1696 if (wValue != 0)
1697 break;
1698 spin_lock(&dev->dev_lock);
1699 /* PXA hardware partially handles SET_INTERFACE;
1700 * we need to kluge around that interference. */
1701 if (gadget_is_pxa(gadget)) {
1702 ret = gs_set_config(dev, use_acm ?
1703 GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID);
1704 goto set_interface_done;
1705 }
1706 if (dev->dev_config != GS_BULK_CONFIG_ID
1707 && wIndex == GS_CONTROL_INTERFACE_ID) {
1708 if (dev->dev_notify_ep) {
1709 usb_ep_disable(dev->dev_notify_ep);
1710 usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc);
1711 }
1712 } else {
1713 usb_ep_disable(dev->dev_in_ep);
1714 usb_ep_disable(dev->dev_out_ep);
1715 usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc);
1716 usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc);
1717 }
1718 ret = 0;
1719set_interface_done:
1720 spin_unlock(&dev->dev_lock);
1721 break;
1722
1723 case USB_REQ_GET_INTERFACE:
1724 if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
1725 || dev->dev_config == GS_NO_CONFIG_ID)
1726 break;
1727 if (wIndex >= GS_MAX_NUM_INTERFACES
1728 || (dev->dev_config == GS_BULK_CONFIG_ID
1729 && wIndex != GS_BULK_INTERFACE_ID)) {
1730 ret = -EDOM;
1731 break;
1732 }
1733 /* no alternate interface settings */
1734 *(u8 *)req->buf = 0;
1735 ret = min(wLength, (u16)1);
1736 break;
1737
1738 default:
1739 printk(KERN_ERR "gs_setup: unknown standard request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1740 ctrl->bRequestType, ctrl->bRequest,
1741 wValue, wIndex, wLength);
1742 break;
1743 }
1744
1745 return ret;
1746}
1747
1748static int gs_setup_class(struct usb_gadget *gadget,
1749 const struct usb_ctrlrequest *ctrl)
1750{
1751 int ret = -EOPNOTSUPP;
1752 struct gs_dev *dev = get_gadget_data(gadget);
1753 struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
1754 struct usb_request *req = dev->dev_ctrl_req;
1bbc1696
DB		 1755 u16 wIndex = le16_to_cpu(ctrl->wIndex);
1756 u16 wValue = le16_to_cpu(ctrl->wValue);
1757 u16 wLength = le16_to_cpu(ctrl->wLength);
1da177e4
LT		 1758
1759 switch (ctrl->bRequest) {
1760 case USB_CDC_REQ_SET_LINE_CODING:
1761 ret = min(wLength,
1762 (u16)sizeof(struct usb_cdc_line_coding));
1763 if (port) {
1764 spin_lock(&port->port_lock);
1765 memcpy(&port->port_line_coding, req->buf, ret);
1766 spin_unlock(&port->port_lock);
1767 }
1768 break;
1769
1770 case USB_CDC_REQ_GET_LINE_CODING:
1771 port = dev->dev_port[0]; /* ACM only has one port */
1772 ret = min(wLength,
1773 (u16)sizeof(struct usb_cdc_line_coding));
1774 if (port) {
1775 spin_lock(&port->port_lock);
1776 memcpy(req->buf, &port->port_line_coding, ret);
1777 spin_unlock(&port->port_lock);
1778 }
1779 break;
1780
1781 case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
1782 ret = 0;
1783 break;
1784
1785 default:
1786 printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1787 ctrl->bRequestType, ctrl->bRequest,
1788 wValue, wIndex, wLength);
1789 break;
1790 }
1791
1792 return ret;
1793}
1794
1795/*
1796 * gs_setup_complete
1797 */
1798static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req)
1799{
1800 if (req->status || req->actual != req->length) {
1801 printk(KERN_ERR "gs_setup_complete: status error, status=%d, actual=%d, length=%d\n",
1802 req->status, req->actual, req->length);
1803 }
1804}
1805
1806/*
1807 * gs_disconnect
1808 *
1809 * Called when the device is disconnected. Frees the closed
1810 * ports and disconnects open ports. Open ports will be freed
1811 * on close. Then reallocates the ports for the next connection.
1812 */
1813static void gs_disconnect(struct usb_gadget *gadget)
1814{
1815 unsigned long flags;
1816 struct gs_dev *dev = get_gadget_data(gadget);
1817
1818 spin_lock_irqsave(&dev->dev_lock, flags);
1819
1820 gs_reset_config(dev);
1821
1822 /* free closed ports and disconnect open ports */
1823 /* (open ports will be freed when closed) */
1824 gs_free_ports(dev);
1825
1826 /* re-allocate ports for the next connection */
1827 if (gs_alloc_ports(dev, GFP_ATOMIC) != 0)
1828 printk(KERN_ERR "gs_disconnect: cannot re-allocate ports\n");
1829
1830 spin_unlock_irqrestore(&dev->dev_lock, flags);
1831
1832 printk(KERN_INFO "gs_disconnect: %s disconnected\n", GS_LONG_NAME);
1833}
1834
1835/*
1836 * gs_set_config
1837 *
1838 * Configures the device by enabling device specific
1839 * optimizations, setting up the endpoints, allocating
1840 * read and write requests and queuing read requests.
1841 *
1842 * The device lock must be held when calling this function.
1843 */
1844static int gs_set_config(struct gs_dev *dev, unsigned config)
1845{
1846 int i;
1847 int ret = 0;
1848 struct usb_gadget *gadget = dev->dev_gadget;
1849 struct usb_ep *ep;
1850 struct usb_endpoint_descriptor *ep_desc;
1851 struct usb_request *req;
1852 struct gs_req_entry *req_entry;
1853
1854 if (dev == NULL) {
1855 printk(KERN_ERR "gs_set_config: NULL device pointer\n");
1856 return 0;
1857 }
1858
1859 if (config == dev->dev_config)
1860 return 0;
1861
1862 gs_reset_config(dev);
1863
1864 switch (config) {
1865 case GS_NO_CONFIG_ID:
1866 return 0;
1867 case GS_BULK_CONFIG_ID:
1868 if (use_acm)
1869 return -EINVAL;
1870 /* device specific optimizations */
1871 if (gadget_is_net2280(gadget))
1872 net2280_set_fifo_mode(gadget, 1);
1873 break;
1874 case GS_ACM_CONFIG_ID:
1875 if (!use_acm)
1876 return -EINVAL;
1877 /* device specific optimizations */
1878 if (gadget_is_net2280(gadget))
1879 net2280_set_fifo_mode(gadget, 1);
1880 break;
1881 default:
1882 return -EINVAL;
1883 }
1884
1885 dev->dev_config = config;
1886
1887 gadget_for_each_ep(ep, gadget) {
1888
1889 if (EP_NOTIFY_NAME
1890 && strcmp(ep->name, EP_NOTIFY_NAME) == 0) {
1891 ep_desc = GS_SPEED_SELECT(
1892 gadget->speed == USB_SPEED_HIGH,
1893 &gs_highspeed_notify_desc,
1894 &gs_fullspeed_notify_desc);
1895 ret = usb_ep_enable(ep,ep_desc);
1896 if (ret == 0) {
1897 ep->driver_data = dev;
1898 dev->dev_notify_ep = ep;
1899 dev->dev_notify_ep_desc = ep_desc;
1900 } else {
1901 printk(KERN_ERR "gs_set_config: cannot enable notify endpoint %s, ret=%d\n",
1902 ep->name, ret);
1903 goto exit_reset_config;
1904 }
1905 }
1906
1907 else if (strcmp(ep->name, EP_IN_NAME) == 0) {
1908 ep_desc = GS_SPEED_SELECT(
1909 gadget->speed == USB_SPEED_HIGH,
1910 &gs_highspeed_in_desc,
1911 &gs_fullspeed_in_desc);
1912 ret = usb_ep_enable(ep,ep_desc);
1913 if (ret == 0) {
1914 ep->driver_data = dev;
1915 dev->dev_in_ep = ep;
1916 dev->dev_in_ep_desc = ep_desc;
1917 } else {
1918 printk(KERN_ERR "gs_set_config: cannot enable in endpoint %s, ret=%d\n",
1919 ep->name, ret);
1920 goto exit_reset_config;
1921 }
1922 }
1923
1924 else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
1925 ep_desc = GS_SPEED_SELECT(
1926 gadget->speed == USB_SPEED_HIGH,
1927 &gs_highspeed_out_desc,
1928 &gs_fullspeed_out_desc);
1929 ret = usb_ep_enable(ep,ep_desc);
1930 if (ret == 0) {
1931 ep->driver_data = dev;
1932 dev->dev_out_ep = ep;
1933 dev->dev_out_ep_desc = ep_desc;
1934 } else {
1935 printk(KERN_ERR "gs_set_config: cannot enable out endpoint %s, ret=%d\n",
1936 ep->name, ret);
1937 goto exit_reset_config;
1938 }
1939 }
1940
1941 }
1942
1943 if (dev->dev_in_ep == NULL || dev->dev_out_ep == NULL
1944 || (config != GS_BULK_CONFIG_ID && dev->dev_notify_ep == NULL)) {
1945 printk(KERN_ERR "gs_set_config: cannot find endpoints\n");
1946 ret = -ENODEV;
1947 goto exit_reset_config;
1948 }
1949
1950 /* allocate and queue read requests */
1951 ep = dev->dev_out_ep;
1952 for (i=0; i<read_q_size && ret == 0; i++) {
1953 if ((req=gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC))) {
1954 req->complete = gs_read_complete;
1955 if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1956 printk(KERN_ERR "gs_set_config: cannot queue read request, ret=%d\n",
1957 ret);
1958 }
1959 } else {
1960 printk(KERN_ERR "gs_set_config: cannot allocate read requests\n");
1961 ret = -ENOMEM;
1962 goto exit_reset_config;
1963 }
1964 }
1965
1966 /* allocate write requests, and put on free list */
1967 ep = dev->dev_in_ep;
1968 for (i=0; i<write_q_size; i++) {
1969 if ((req_entry=gs_alloc_req_entry(ep, ep->maxpacket, GFP_ATOMIC))) {
1970 req_entry->re_req->complete = gs_write_complete;
1971 list_add(&req_entry->re_entry, &dev->dev_req_list);
1972 } else {
1973 printk(KERN_ERR "gs_set_config: cannot allocate write requests\n");
1974 ret = -ENOMEM;
1975 goto exit_reset_config;
1976 }
1977 }
1978
1979 printk(KERN_INFO "gs_set_config: %s configured, %s speed %s config\n",
1980 GS_LONG_NAME,
1981 gadget->speed == USB_SPEED_HIGH ? "high" : "full",
1982 config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM");
1983
1984 return 0;
1985
1986exit_reset_config:
1987 gs_reset_config(dev);
1988 return ret;
1989}
1990
1991/*
1992 * gs_reset_config
1993 *
1994 * Mark the device as not configured, disable all endpoints,
1995 * which forces completion of pending I/O and frees queued
1996 * requests, and free the remaining write requests on the
1997 * free list.
1998 *
1999 * The device lock must be held when calling this function.
2000 */
2001static void gs_reset_config(struct gs_dev *dev)
2002{
2003 struct gs_req_entry *req_entry;
2004
2005 if (dev == NULL) {
2006 printk(KERN_ERR "gs_reset_config: NULL device pointer\n");
2007 return;
2008 }
2009
2010 if (dev->dev_config == GS_NO_CONFIG_ID)
2011 return;
2012
2013 dev->dev_config = GS_NO_CONFIG_ID;
2014
2015 /* free write requests on the free list */
2016 while(!list_empty(&dev->dev_req_list)) {
2017 req_entry = list_entry(dev->dev_req_list.next,
2018 struct gs_req_entry, re_entry);
2019 list_del(&req_entry->re_entry);
2020 gs_free_req_entry(dev->dev_in_ep, req_entry);
2021 }
2022
2023 /* disable endpoints, forcing completion of pending i/o; */
2024 /* completion handlers free their requests in this case */
2025 if (dev->dev_notify_ep) {
2026 usb_ep_disable(dev->dev_notify_ep);
2027 dev->dev_notify_ep = NULL;
2028 }
2029 if (dev->dev_in_ep) {
2030 usb_ep_disable(dev->dev_in_ep);
2031 dev->dev_in_ep = NULL;
2032 }
2033 if (dev->dev_out_ep) {
2034 usb_ep_disable(dev->dev_out_ep);
2035 dev->dev_out_ep = NULL;
2036 }
2037}
2038
2039/*
2040 * gs_build_config_buf
2041 *
2042 * Builds the config descriptors in the given buffer and returns the
2043 * length, or a negative error number.
2044 */
2045static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
2046 u8 type, unsigned int index, int is_otg)
2047{
2048 int len;
2049 int high_speed;
2050 const struct usb_config_descriptor *config_desc;
2051 const struct usb_descriptor_header **function;
2052
2053 if (index >= gs_device_desc.bNumConfigurations)
2054 return -EINVAL;
2055
2056 /* other speed switches high and full speed */
2057 high_speed = (speed == USB_SPEED_HIGH);
2058 if (type == USB_DT_OTHER_SPEED_CONFIG)
2059 high_speed = !high_speed;
2060
2061 if (use_acm) {
2062 config_desc = &gs_acm_config_desc;
2063 function = GS_SPEED_SELECT(high_speed,
2064 gs_acm_highspeed_function,
2065 gs_acm_fullspeed_function);
2066 } else {
2067 config_desc = &gs_bulk_config_desc;
2068 function = GS_SPEED_SELECT(high_speed,
2069 gs_bulk_highspeed_function,
2070 gs_bulk_fullspeed_function);
2071 }
2072
2073 /* for now, don't advertise srp-only devices */
2074 if (!is_otg)
2075 function++;
2076
2077 len = usb_gadget_config_buf(config_desc, buf, GS_MAX_DESC_LEN, function);
2078 if (len < 0)
2079 return len;
2080
2081 ((struct usb_config_descriptor *)buf)->bDescriptorType = type;
2082
2083 return len;
2084}
2085
2086/*
2087 * gs_alloc_req
2088 *
2089 * Allocate a usb_request and its buffer. Returns a pointer to the
2090 * usb_request or NULL if there is an error.
2091 */
1bbc1696 2092static struct usb_request *
55016f10 2093gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags)
1da177e4
LT		 2094{
2095 struct usb_request *req;
2096
2097 if (ep == NULL)
2098 return NULL;
2099
2100 req = usb_ep_alloc_request(ep, kmalloc_flags);
2101
2102 if (req != NULL) {
2103 req->length = len;
2104 req->buf = kmalloc(len, kmalloc_flags);
2105 if (req->buf == NULL) {
2106 usb_ep_free_request(ep, req);
2107 return NULL;
2108 }
2109 }
2110
2111 return req;
2112}
2113
2114/*
2115 * gs_free_req
2116 *
2117 * Free a usb_request and its buffer.
2118 */
2119static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
2120{
2121 if (ep != NULL && req != NULL) {
2122 kfree(req->buf);
2123 usb_ep_free_request(ep, req);
2124 }
2125}
2126
2127/*
2128 * gs_alloc_req_entry
2129 *
2130 * Allocates a request and its buffer, using the given
2131 * endpoint, buffer len, and kmalloc flags.
2132 */
1bbc1696 2133static struct gs_req_entry *
55016f10 2134gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
1da177e4
LT		 2135{
2136 struct gs_req_entry *req;
2137
2138 req = kmalloc(sizeof(struct gs_req_entry), kmalloc_flags);
2139 if (req == NULL)
2140 return NULL;
2141
2142 req->re_req = gs_alloc_req(ep, len, kmalloc_flags);
2143 if (req->re_req == NULL) {
2144 kfree(req);
2145 return NULL;
2146 }
2147
2148 req->re_req->context = req;
2149
2150 return req;
2151}
2152
2153/*
2154 * gs_free_req_entry
2155 *
2156 * Frees a request and its buffer.
2157 */
2158static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req)
2159{
2160 if (ep != NULL && req != NULL) {
2161 if (req->re_req != NULL)
2162 gs_free_req(ep, req->re_req);
2163 kfree(req);
2164 }
2165}
2166
2167/*
2168 * gs_alloc_ports
2169 *
2170 * Allocate all ports and set the gs_dev struct to point to them.
2171 * Return 0 if successful, or a negative error number.
2172 *
2173 * The device lock is normally held when calling this function.
2174 */
55016f10 2175static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags)
1da177e4
LT		 2176{
2177 int i;
2178 struct gs_port *port;
2179
2180 if (dev == NULL)
2181 return -EIO;
2182
2183 for (i=0; i<GS_NUM_PORTS; i++) {
2184 if ((port=(struct gs_port *)kmalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL)
2185 return -ENOMEM;
2186
2187 memset(port, 0, sizeof(struct gs_port));
2188 port->port_dev = dev;
2189 port->port_num = i;
2190 port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE);
2191 port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT;
2192 port->port_line_coding.bParityType = GS_DEFAULT_PARITY;
2193 port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS;
2194 spin_lock_init(&port->port_lock);
2195 init_waitqueue_head(&port->port_write_wait);
2196
2197 dev->dev_port[i] = port;
2198 }
2199
2200 return 0;
2201}
2202
2203/*
2204 * gs_free_ports
2205 *
2206 * Free all closed ports. Open ports are disconnected by
2207 * freeing their write buffers, setting their device pointers
2208 * and the pointers to them in the device to NULL. These
2209 * ports will be freed when closed.
2210 *
2211 * The device lock is normally held when calling this function.
2212 */
2213static void gs_free_ports(struct gs_dev *dev)
2214{
2215 int i;
2216 unsigned long flags;
2217 struct gs_port *port;
2218
2219 if (dev == NULL)
2220 return;
2221
2222 for (i=0; i<GS_NUM_PORTS; i++) {
2223 if ((port=dev->dev_port[i]) != NULL) {
2224 dev->dev_port[i] = NULL;
2225
2226 spin_lock_irqsave(&port->port_lock, flags);
2227
2228 if (port->port_write_buf != NULL) {
2229 gs_buf_free(port->port_write_buf);
2230 port->port_write_buf = NULL;
2231 }
2232
2233 if (port->port_open_count > 0 || port->port_in_use) {
2234 port->port_dev = NULL;
2235 wake_up_interruptible(&port->port_write_wait);
2236 if (port->port_tty) {
2237 wake_up_interruptible(&port->port_tty->read_wait);
2238 wake_up_interruptible(&port->port_tty->write_wait);
2239 }
2240 spin_unlock_irqrestore(&port->port_lock, flags);
2241 } else {
2242 spin_unlock_irqrestore(&port->port_lock, flags);
2243 kfree(port);
2244 }
2245
2246 }
2247 }
2248}
2249
2250/* Circular Buffer */
2251
2252/*
2253 * gs_buf_alloc
2254 *
2255 * Allocate a circular buffer and all associated memory.
2256 */
55016f10 2257static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags)
1da177e4
LT		 2258{
2259 struct gs_buf *gb;
2260
2261 if (size == 0)
2262 return NULL;
2263
2264 gb = (struct gs_buf *)kmalloc(sizeof(struct gs_buf), kmalloc_flags);
2265 if (gb == NULL)
2266 return NULL;
2267
2268 gb->buf_buf = kmalloc(size, kmalloc_flags);
2269 if (gb->buf_buf == NULL) {
2270 kfree(gb);
2271 return NULL;
2272 }
2273
2274 gb->buf_size = size;
2275 gb->buf_get = gb->buf_put = gb->buf_buf;
2276
2277 return gb;
2278}
2279
2280/*
2281 * gs_buf_free
2282 *
2283 * Free the buffer and all associated memory.
2284 */
2285void gs_buf_free(struct gs_buf *gb)
2286{
1bc3c9e1
JJ		 2287 if (gb) {
2288 kfree(gb->buf_buf);
1da177e4
LT		 2289 kfree(gb);
2290 }
2291}
2292
2293/*
2294 * gs_buf_clear
2295 *
2296 * Clear out all data in the circular buffer.
2297 */
2298void gs_buf_clear(struct gs_buf *gb)
2299{
2300 if (gb != NULL)
2301 gb->buf_get = gb->buf_put;
2302 /* equivalent to a get of all data available */
2303}
2304
2305/*
2306 * gs_buf_data_avail
2307 *
2308 * Return the number of bytes of data available in the circular
2309 * buffer.
2310 */
2311unsigned int gs_buf_data_avail(struct gs_buf *gb)
2312{
2313 if (gb != NULL)
2314 return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
2315 else
2316 return 0;
2317}
2318
2319/*
2320 * gs_buf_space_avail
2321 *
2322 * Return the number of bytes of space available in the circular
2323 * buffer.
2324 */
2325unsigned int gs_buf_space_avail(struct gs_buf *gb)
2326{
2327 if (gb != NULL)
2328 return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
2329 else
2330 return 0;
2331}
2332
2333/*
2334 * gs_buf_put
2335 *
2336 * Copy data data from a user buffer and put it into the circular buffer.
2337 * Restrict to the amount of space available.
2338 *
2339 * Return the number of bytes copied.
2340 */
2341unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count)
2342{
2343 unsigned int len;
2344
2345 if (gb == NULL)
2346 return 0;
2347
2348 len = gs_buf_space_avail(gb);
2349 if (count > len)
2350 count = len;
2351
2352 if (count == 0)
2353 return 0;
2354
2355 len = gb->buf_buf + gb->buf_size - gb->buf_put;
2356 if (count > len) {
2357 memcpy(gb->buf_put, buf, len);
2358 memcpy(gb->buf_buf, buf+len, count - len);
2359 gb->buf_put = gb->buf_buf + count - len;
2360 } else {
2361 memcpy(gb->buf_put, buf, count);
2362 if (count < len)
2363 gb->buf_put += count;
2364 else /* count == len */
2365 gb->buf_put = gb->buf_buf;
2366 }
2367
2368 return count;
2369}
2370
2371/*
2372 * gs_buf_get
2373 *
2374 * Get data from the circular buffer and copy to the given buffer.
2375 * Restrict to the amount of data available.
2376 *
2377 * Return the number of bytes copied.
2378 */
2379unsigned int gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count)
2380{
2381 unsigned int len;
2382
2383 if (gb == NULL)
2384 return 0;
2385
2386 len = gs_buf_data_avail(gb);
2387 if (count > len)
2388 count = len;
2389
2390 if (count == 0)
2391 return 0;
2392
2393 len = gb->buf_buf + gb->buf_size - gb->buf_get;
2394 if (count > len) {
2395 memcpy(buf, gb->buf_get, len);
2396 memcpy(buf+len, gb->buf_buf, count - len);
2397 gb->buf_get = gb->buf_buf + count - len;
2398 } else {
2399 memcpy(buf, gb->buf_get, count);
2400 if (count < len)
2401 gb->buf_get += count;
2402 else /* count == len */
2403 gb->buf_get = gb->buf_buf;
2404 }
2405
2406 return count;
2407}
Linux kernel - Deliverables
This page took 0.182249 seconds and 5 git commands to generate.